English dropdown-ico

Manual Grundig CDS 6580 A SPCD

35 pages 0.98 mb
Download

Go to site of 35

Summary
  • Grundig CDS 6580 A SPCD - page 1

    HIFI MICRO SYSTEM Ovation CDS 6580 A SPCD ...

  • Grundig CDS 6580 A SPCD - page 2

    2 CONTENTS ____________________________________________ 3 Set-up and safety Magic Fidelity . The sound concept from Ovation 4 Overview The hi-fi system controls The hi-fi system displays The remote control 12 Connection and preparation 15 Settings Setting the time T uning and storing radio position Resetting the hi-fi system 18 General functions 20 ...

  • Grundig CDS 6580 A SPCD - page 3

    ENGLISH 3 Please note the following information when setting up the system: The hi-fi system is designed for the playback of audio signals. Any other use is expressly prohibited. If you want to set up the hi-fi system on wall shelves or in cupboards, please ensure that it is adequately ventilated. There must be at least 10 cm of space at the side, ...

  • Grundig CDS 6580 A SPCD - page 4

    4 The hi-fi system controls Controls on the fr ont T uner mode TUNER/BAND Switches on the hi-fi system with the input source » TUNER «, selects the input source » TUNER «; selects the waveband » FM « or » MW «. TUNING/ALBUM Press and hold down to start the station search; UP – DOWN press briefly to change the frequency in small steps. $s ...

  • Grundig CDS 6580 A SPCD - page 5

    ENGLISH 5 $s 6 In MP3/WMA and CD-DA mode: pressing briefly selects the next file or the next track; holding down searches for a particular passage. 5 aa a In MP3/WMA and CD-DA mode: pressing briefly selects the previous file or the previous track; hold- ing down searches backwards for a particular passage. 7 Ends CD playback; pressing twice deletes ...

  • Grundig CDS 6580 A SPCD - page 6

    6 Controls on the top General information ON/OFF Switches the device to and from standby mode. The device is only fully disconnected from the mains after the plug has been pulled out. SLEEP For setting the sleep timer . SNOOZE Interrupts the alarm function. – VOLUME + Adjusts the volume. DSC Selects the sound settings USER, CLASSIC, POP , JAZZ an ...

  • Grundig CDS 6580 A SPCD - page 7

    ENGLISH 7 Controls on the sides AC ~ Socket for mains cable (left side of the device). The only way to isolate the hi-fi system from the mains supply is to pull the plug out. AUX Audio signal input for an external device on the right hand side. y Headphone socket for connecting a stereo head- phone set with a jack plug (ø 3.5 mm) on the right side ...

  • Grundig CDS 6580 A SPCD - page 8

    8 The hi-fi system displays 000:000 In standby mode: displays the time. In tuner mode: displays the preset station. In MP3/WMA mode: displays the total number of albums and files, and the elapsed playing time of the current file. In CD-DA mode: displays the total playing time, and the elapsed playing time of the current track. 000000.00 In standby ...

  • Grundig CDS 6580 A SPCD - page 9

    ENGLISH 9 RANDOM In MP3/WMA and CD-DA mode: all files or tracks are played back in ran- dom order . PROG In tuner mode: a stored radio station is selected or played. In MP3/WMA and CD-DA mode: a track memor y is created or played back. ɳ In tuner mode: an FM stereo station is being received. kHZ In tuner mode: in combination with the MW frequency ...

  • Grundig CDS 6580 A SPCD - page 10

    10 The remote control ON/OFF Switches the hi-fi system to standby mode and from standby mode to the last signal source selected. CD ı II Switches the hi-fi system on with the » CD « input source, selects the » CD « input source; In MP3/WMA and CD-DA mode: starts and pauses CD playback. 7 In MP3/WMA and CD-DA mode: ends CD play- back pressing t ...

  • Grundig CDS 6580 A SPCD - page 11

    ENGLISH 11 DISPLA Y In tuner mode: switches the display between fre- quency , station name, station type, radio text and time/day . In CD-DA mode: switches the display between elapsed playing time and time/day . In MP3/WMA mode: switches the display between file number/elapsed playing time, file name/ID3 tag information (ticker text) and time/day . ...

  • Grundig CDS 6580 A SPCD - page 12

    12 Connecting the antenna 1 Plug the rooftop antenna cable into the » FM ANTENNA « antenna socket on the hi-fi. Note: If no rooftop antenna is available, use the auxiliar y antenna supplied. This antenna provides reasonably good reception of local FM (VHF) stations. Do not shorten the auxiliar y antenna. 2 Insert the wire frame antenna cable into ...

  • Grundig CDS 6580 A SPCD - page 13

    ENGLISH 13 Inserting batteries in the remote control 1 Open the batter y compartment by pushing down its lid. 2 When inserting the batteries (2 x 1.5 V , R 6/UM 3/AA), obser ve the polarity marked on the base of the batter y com- partment. Note: Do not expose the batteries to extreme heat, caused for exam- ple by direct sunlight, heaters or fire. I ...

  • Grundig CDS 6580 A SPCD - page 14

    14 CONNECTION AND PREP ARA TION _ Additional information for units sold in the UK. Units sold in the UK are suitable for operation from a 240V ac, 50Hz mains supply . The range of multi-system receivers is built to work in most European coun- tries. However , the mains plug and socket system for the UK dif fers from many European countries. This ap ...

  • Grundig CDS 6580 A SPCD - page 15

    ENGLISH 15 Setting the time A demo programme starts when you connect the hi-fi system to the mains for the first time. T o end the demo programme switch the hi-fi system to stand-by mode by pressing » ON/OFF « briefly . Now the time and day displays will flash, indicating that they need to be set. The following settings may only be performed in s ...

  • Grundig CDS 6580 A SPCD - page 16

    16 Setting and storing radio stations Automatic station search After the hi-fi system has been connected to the mains for the first time, the device in tuner mode searches for the 40 stations with the best reception and stores them. 1 After connection, switch on the hi-fi system by pressing » TUNER/BAND «. – Display: » FM «, the frequency in ...

  • Grundig CDS 6580 A SPCD - page 17

    ENGLISH 17 Storing stations on station positions 1 Press » TUNER/BAND « to select the frequency band (FM or MW). 2 Press » UP TUNING/ALBUM DOWN « to select the station you want to store. 3 Press » PROG./RAND./ TIME « to activate the memor y func- tion. – Display: both the station position » P01 « and » PROG « flash. 4 Select desired sta ...

  • Grundig CDS 6580 A SPCD - page 18

    18 Switching the hi-fi system on and off 1 Switch the hi-fi system on from standby mode by pressing » ON/OFF «. – The last input source used is automatically selected. Note: The following buttons on the hi-fi or the remote control can also be used to switch on the system: » TUNER/BAND « – tuner mode; » CD ı II « – CD mode; » AUX « ? ...

  • Grundig CDS 6580 A SPCD - page 19

    ENGLISH 19 Selecting sound effects Y ou can select from the sound settings USER, CLASSIC, POP , JAZZ and ROCK. The basic setting is USER. 1 Select the sound setting by pressing » DSC «. – Display: » USER «, » CLASSIC X «, » POP C «, » JAZZ V « or » ROCK Y «. Setting the equaliser The USER sound setting allows you to make your own pers ...

  • Grundig CDS 6580 A SPCD - page 20

    20 Selecting the T uner input source 1 Press » TUNER/BAND « to select the input source. – The most recently selected station is activated (Last Station Memor y). – Display: e.g. » FM 100.60 « or » ENERGY «. Selecting a preset position 1 Press » TUNER/BAND « to select the frequency band (FM or MW). 2 Select the preset position in steps b ...

  • Grundig CDS 6580 A SPCD - page 21

    ENGLISH 21 RDS station service RDS (Radio Data System) is an information system which is trans- mitted additionally by most FM stations. When the hi-fi system is receiving an RDS station, the station name, for example » FANTASY «, and » f « appear in the display . Note: It may take some time before all the RDS information is available. Searchin ...

  • Grundig CDS 6580 A SPCD - page 22

    22 Station types (PTY) 1 T o call up the current station type, press » PTY « on the remote control. – Display: the current station type, e.g. » NEWS «, and » PTY «. – If no station type code is transmitted, » NO PTY « appears in the display . 2 Press » PTY « repeatedly on the remote control to select another station type. 3 Press » U ...

  • Grundig CDS 6580 A SPCD - page 23

    ENGLISH 23 The hi-fi system is suitable for music CDs bearing the logo shown here (CD-DA), and for CD-Rs and CD-RWs with audio data or MP3/WMA formats. In MP3/WMA mode, the terms “album” and “file” are ver y impor- tant. “Album” corresponds to a folder on a PC, “file” to a file on a PC or a CD-DA track. An MP3/WMA CD may not contain ...

  • Grundig CDS 6580 A SPCD - page 24

    24 Inserting a CD 1 Open the CD tray on the hi-fi by lifting up the front panel. – Display: » OPEN «. 2 Place the CD in the compartment with the printed side facing outwards. 3 Close the CD compartment and return the front panel to its original position. – Display: » CD READ « flashes. – In MP3/WMA mode: the hi-fi system scans the content ...

  • Grundig CDS 6580 A SPCD - page 25

    ENGLISH 25 Selecting another file or track 1 During playback, keep pressing » 5 aa a « or » $s 6 « until you see the number of the file or track you want in the display . – Playback of the selected file or track starts automatically . Note: Y ou can also select files/tracks in stop mode. Searching for a passage within a file or track 1 During ...

  • Grundig CDS 6580 A SPCD - page 26

    26 Repeating a file or a title (Repeat One) 1 Press » CD ı II « to start playback. 2 Press » 5 aa a « or » $s 6 « to select the file or track. 3 Select the repeat function by pressing » INTRO/REP ./TIMER « until » M 1 « appears in the display . – The file or track is played back repeatedly . 4 T o quit the function, press » INTRO/REP ...

  • Grundig CDS 6580 A SPCD - page 27

    ENGLISH 27 Playing back files or tracks in random order (Random) 1 Press » CD ı II « to start playback. 2 Press » PROG./RAND./TIME « to select the function. – Display: » RANDOM «. – The files or tracks on the CD are played back in random order . 3 T o end this function, press » PROG./RAND./TIME «. – Display: » RANDOM « disappears. ...

  • Grundig CDS 6580 A SPCD - page 28

    28 Creating a track memory Y ou can create a track memor y of up to 60 files on dif ferent albums (MP3/WMA) or up to 60 tracks (CD-DA) for the current CD in any order you choose and then play them back in that sequence. A file or track may be stored more than once. Programming is only possi- ble in stop mode. Selecting and storing files (MP3/WMA on ...

  • Grundig CDS 6580 A SPCD - page 29

    ENGLISH 29 Checking the track memory 1 Press » PROG./RAND./TIME « repeatedly when in stop mode. – The sequence of the stored files or tracks is displayed. Adding files or tracks 1 In the stop position, select the file or track with » 5 a « or » s 6 « and press » PROG./RAND./TIME « to store. Deleting the track memory 1 Open the CD compartm ...

  • Grundig CDS 6580 A SPCD - page 30

    30 Y our hi-fi system has three timer modes: – The switch-on timer , which switches the hi-fi system on at the set time and wakes you with an alarm or music. – The reminder timer , reminding you by sounding the signal tone at a preset time. – The sleep timer , which switches the hi-fi system off at a preset time. Switch-on timer Setting the s ...

  • Grundig CDS 6580 A SPCD - page 31

    ENGLISH 31 Interrupting the alarm 1 During the alarm, press » SNOOZE « on the remote control. – The alarm signal (signal tone, radio station or CD) stops. – The alarm goes off again at 5-minute inter vals (alar m duration – 60 minutes). Cancelling the alarm for the day 1 Switch the hi-fi system off by pressing » ON/OFF « when the alarm is ...

  • Grundig CDS 6580 A SPCD - page 32

    32 Reminder timer 1 Press » NAP « to call up the function. – Display: » NAP 10 « (minimum time setting), » NAP « flashes. 2 Enter the reminder time (in 10 minute inter vals from 10 to 120 minutes) with » NAP «. – Display: » NAP «. – After the set time has expired, a signal tone sounds (for max. 90 minutes). – The display shows the ...

  • Grundig CDS 6580 A SPCD - page 33

    ENGLISH 33 Cleaning the CD unit If the device is unable to scan CDs perfectly , use a standard, com- mercially available cleaning CD to clean the laser optics. Other cleaning methods may damage the laser optics. T o clean CDs use a lint-free cloth and wipe them in a straight line from the centre of the disc outwards. Do not use cleaning fluid for v ...

  • Grundig CDS 6580 A SPCD - page 34

    34 General information on laser devices Y our system is a CLASS 1 LASER PRODUCT . This means that the laser is designed in such a way as to ensure that the maximum permissible emission value cannot be exceeded under any circumstances. Caution: If operating devices or methods other than those specified here are employed, it may lead to dangerous exp ...

  • Grundig CDS 6580 A SPCD - page 35

    Grundig Multimedia B.V . Atrium, Strawinskylaan 3105 • NL-1077 ZX Amsterdam • http://www .grundig.com 08/20 ...

Manufacturer Grundig Category Stereo System

Documents that we receive from a manufacturer of a Grundig CDS 6580 A SPCD can be divided into several groups. They are, among others:
- Grundig technical drawings
- CDS 6580 A SPCD manuals
- Grundig product data sheets
- information booklets
- or energy labels Grundig CDS 6580 A SPCD
All of them are important, but the most important information from the point of view of use of the device are in the user manual Grundig CDS 6580 A SPCD.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Grundig CDS 6580 A SPCD, service manual, brief instructions and user manuals Grundig CDS 6580 A SPCD. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Grundig CDS 6580 A SPCD.

Similar manuals

A complete manual for the device Grundig CDS 6580 A SPCD, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Grundig CDS 6580 A SPCD by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Grundig CDS 6580 A SPCD.

A complete Grundig manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Grundig CDS 6580 A SPCD - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Grundig CDS 6580 A SPCD, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Grundig CDS 6580 A SPCD, that we can find in the current document
3. Tips how to use the basic functions of the device Grundig CDS 6580 A SPCD - which should help us in our first steps of using Grundig CDS 6580 A SPCD
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Grundig CDS 6580 A SPCD
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Grundig CDS 6580 A SPCD in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Grundig CDS 6580 A SPCD?

Use the form below

If you did not solve your problem by using a manual Grundig CDS 6580 A SPCD, ask a question using the form below. If a user had a similar problem with Grundig CDS 6580 A SPCD it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)