English dropdown-ico

Manual Raymarine 420D

101 pages 1.46 mb
Download

Go to site of 101

Summary
  • Raymarine 420D - page 1

    Distributed by Any reference to Raytheon or RTN in this manual should be interpreted as Raymarine. The names Raytheon and RTN are owned by the Raytheon Company. ...

  • Raymarine 420D - page 2

    Raychart 420/ 420D Chartplotter Owner’s Handbook Document number: 81162_2 Date: January 2000 ...

  • Raymarine 420D - page 3

    ...

  • Raymarine 420D - page 4

    i RayChart 420 and 420D Chartplotter Owner’s Handbook SAFETY NOTICES 1. HIGH VOLTAGE. The display unit contains high voltages. Adjustments require specialised service procedures and tools only available to qualified service technicians – there are no user serviceable parts or adjustments. The operator should never remove the display unit cover ...

  • Raymarine 420D - page 5

    RayChart 420/420D Chartplotter ii RAYTHEON MARINE products are supported by a network of Authorized Service Representatives. For information on Raytheon products and services, contact either of the following: UNITED STATES Raytheon Marine Company 22 Cotton Road, Suite 280 Nashua, NH 03063-4219 Telephone: (603) 881-5200 1-800-539-5539 Fax: (603) 864 ...

  • Raymarine 420D - page 6

    Preface iii Preface This handbook covers the RayChart 420/420D Chartplotter manufactured by Raytheon Marine Company. It contains very important information on the installation and operation of your new equipment. In order to obtain the best results in operation and performance, please read this handbook thoroughly. Raytheon’s Product Support repr ...

  • Raymarine 420D - page 7

    iv RayChart 420/420D Chartplotter ...

  • Raymarine 420D - page 8

    Table of Contents v Contents P re fa c e ................................................................................................ i ii Warranty ................................................................................... i ii EMC Conformance .................................................................... i ii Chapter 1: Overview ...

  • Raymarine 420D - page 9

    vi RayChart 420/420D Chapter 3: Operation ........................................................................ 3- 1 3.1 Introduction ............................................................................. 3 - 1 3.2 Working with waypoints ........................................................... 3- 1 Introduction ........................ ...

  • Raymarine 420D - page 10

    Table of Contents vii 3.7 Using tracks ........................................................................... 3-27 Clearing the current track ........................................................ 3-29 SmartRoute ............................................................................ 3-29 3.8 Man Overboard (MOB) ........................ ...

  • Raymarine 420D - page 11

    viii RayChart 420/420D Chapter 5: Installation ...................................................................... 5- 1 5.1 Introduction ............................................................................. 5 - 1 EMC Installation Guidelines ..................................................... 5 - 1 Suppression ferrites ................. ...

  • Raymarine 420D - page 12

    Table of Contents ix How to contact Raytheon Marine (Europe) ................................ 6 - 5 For accessories and parts ...................................................... 6 - 5 For technical support ........................................................... 6 - 5 Appendix A: Specification ................................................. ...

  • Raymarine 420D - page 13

    x RayChart 420/420D ...

  • Raymarine 420D - page 14

    Chapter 1: Overview 1-1 Chapter 1: Overview 1.1 Introduction How this Handbook is organised This handbook describes the RayChart 420 Chartplotter. The handbook is organised as follows: Chapter 1 - Overview (this chapter) provides an overview of the features and functions of the RayChart 420 Chartplotter. You should read this chapter to familiarise ...

  • Raymarine 420D - page 15

    1-2 RayChart 420/420D Chartplotter General The RayChart 420 Chartplotter is waterproof and can be installed either above or below deck. The equipment comprises: • 6 in LCD display with Chartholder compartment for a Navionics ® Nav-Chart electronic chart card • GPS receiver (RC420) or Differential/GPS (dGPS) receiver (RC420D) The RayChart 420 C ...

  • Raymarine 420D - page 16

    Chapter 1: Overview 1-3 The chartplotter screen can also show additional information, depending on your currently selected options, set up selections and data available from other equipment. An example chart display in its default configuration, with a chart card installed, is shown in Section 1.3, Operating controls . Several functions are availab ...

  • Raymarine 420D - page 17

    1-4 RayChart 420/420D Chartplotter PA G E GOTO MOB CLEAR ENTER D4667_1 TOPSHAM EXETER TEIGNMOUTH EXMOUTH TORQUAY DARTMOUTH PLYMOUTH ENPORT SALCOMBE PORTLAND HARBOUR ISLE O CAP DE LA HAGUE ALDERNEY GUERNSEY JERSEY PORTB CSR 48°30.367'N POS 1°35.636'W 128 nm FIND SHIP ROUTES WAYPOINTS BRG 231°T RNG 40.91nm G OTO ke y P AGE k ey CLEAR k e ...

  • Raymarine 420D - page 18

    Chapter 1: Overview 1-5 The cursor is context-sensitive. Some items on the screen, such as waypoints and chart objects have information associated with them. When you place the cursor over such objects, the information is displayed in the status bar. In addition, a function bar is displayed for certain items. For example, when you place the cursor ...

  • Raymarine 420D - page 19

    1-6 RayChart 420/420D Chartplotter P op-up menus Pop-up menus usually provide various options. When a pop-up menu is on-screen, a set of associated functions is also displayed. Use the trackpad to select an option from the menu, then use the appropriate function to set the option, eg. you can specify the radius of the waypoint arrival alarm and you ...

  • Raymarine 420D - page 20

    Chapter 2: Getting Started 2-1 Chapter 2: Getting started 2.1 Introduction This chapter provides information, instructions and a simple exercise to allow you to practice using the RayChart 420 Chartplotter. It is intended to help you become familiar with the controls before you start using the chartplotter for routine navigation. Note: There is oft ...

  • Raymarine 420D - page 21

    2-2 RayChart 420/420D Chartplotter 2.2 Switching on/off This section explains how to switch the chartplotter on and off. To turn the chartplotter display unit on, press the POWER key. The keys light up, the display unit beeps and the RayChart logo is displayed, followed by the following warning: WARNING THE ELECTRONIC CHART IS AN AID TO NAVIGATION ...

  • Raymarine 420D - page 22

    Chapter 2: Getting Started 2-3 The last-used control is highlighted in inverse video. 2. Press the trackpad left/right to select the LIGHTS function. 3. Press the trackpad top/bottom to increase or decrease the lighting to one of four levels. You can press and hold the trackpad to change the setting more rapidly. The lighting level is adjusted as y ...

  • Raymarine 420D - page 23

    2-4 RayChart 420/420D Chartplotter 2. Press trackpad left/right to highlight SYSTEM SET UP and press ENTER to display the System Set Up menu. 3. Use trackpad up/down to highlight the SIMULATOR option . 4. Use trackpad left/right to select ON. 5. If necessary, use trackpad up/down to highlight, in turn, the SIMULATED SOG and COG options and trackpad ...

  • Raymarine 420D - page 24

    Chapter 2: Getting Started 2-5 50°45 .000 N 001°06 .000 W (c) COG 230° T SOG 6.8 Kts WAYPOINT 001 POSITION STEER STARBOARD BRG 234° T GPS FIX RNG 2.4 nm TIME 14:32 12/12/99 TIME 12:34 DATE 26/01/99 ETA (WAYPOINT) 13:37 26/01/99 TTG (WAYPOINT) 01:03 ETA (ROUTE) 14:32 27/01/99 TTG (ROUTE) 34:03 STEER STARBOARD SUNRISE 06.23 SUNSET 21.34 TODAY AT ...

  • Raymarine 420D - page 25

    2-6 RayChart 420/420D Chartplotter Moving ar ound the chart You will normally operate the chartplotter with the chart showing your vessel ’ s current location. In the default North-Up orientation, the vessel moves in relation to the screen. You will need to reposition the chart if your vessel moves out of the area currently displayed, or if you w ...

  • Raymarine 420D - page 26

    Chapter 2: Getting Started 2-7 Changing the chart scale The RANGE key allows you to change the chart scale so that you can see a smaller or larger area on the screen. Plotter mode is available to allow you to zoom into a smaller area, even when no chart data is available for that scale. To enable plotter mode, see Chapter 4, Setting Up the Chartplo ...

  • Raymarine 420D - page 27

    2-8 RayChart 420/420D Chartplotter TOPSHAM EXETER TEIGNMOUTH EXMOUTH TORQUAY DARTMOUTH PLYMOUTH ENPORT SALCOMBE PORTLAND HARBOUR ISLE O CAP DE LA HAGUE ALDERNEY GUERNSEY JERSEY PORTB CSR 48°30.367'N POS 1°35.636'W 128 nm FIND SHIP ROUTES WAYPOINTS BRG 231°T RNG 40.91nm Chart Boundary - Indicates further detail is available inside. Show ...

  • Raymarine 420D - page 28

    Chapter 2: Getting Started 2-9 The chart scale in use is indicated in the status bar; the number represents the distance (in nautical miles) displayed from the top to the bottom of the screen. To obtain Navionics Nav-Chart cards contact your local dealer or: Navionics S.p.A. Via Vespucci 289 55049Viareggio , Italy Tel: (+39) 584 961696 Fax: (+39) 5 ...

  • Raymarine 420D - page 29

    2-10 RayChart 420/420D Chartplotter Removing a Nav-Chart card CAUTION: DO NOT use a metallic instrument, eg. a screwdriver or pliers, to aid removal as doing so can cause irreparable damage. To remove a Nav-Chart card: 1. Pull out the cartridge cover at the right hand side of the unit. 2. Grip the card firmly and pull to remove it from its slot. 3. ...

  • Raymarine 420D - page 30

    Chapter 2: Getting Started 2-11 To obtain port services information: 1. Place the cursor over the port symbol for which you require information. The PORT SERVICES function, together with help text, is displayed: D4707_1 2. To view further details, press ENTER . The details available are listed on- screen in an object information pop-up: D4708_1 INF ...

  • Raymarine 420D - page 31

    2-12 RayChart 420/420D Chartplotter ...

  • Raymarine 420D - page 32

    Chapter 3: Operation 3-1 Chapter 3: Operation 3.1 Introduction This chapter explains how to use the chart functions to navigate with your RayChart 420. It covers the following topics: • Controlling waypoints; placing, moving, editing and deleting waypoints • Working with routes; creating a new route, managing routes using the route database and ...

  • Raymarine 420D - page 33

    3-2 RayChart 420/420D Chartplotter All waypoints in the database are displayed on the screen, unless you set SHOW WAYPOINTS to OFF in the Chart Set Up menu, as described in Chapter 4 . You can select a waypoint, either on-screen or from the list, for editing. The waypoint is usually placed at the cursor position and can be part of a route; you can ...

  • Raymarine 420D - page 34

    Chapter 3: Operation 3-3 PLACE WAYPOINT MOVE CURSOR, "ENTER"TO PLACE WAYPOINT, "CLEAR" TO QUIT 2. Place the cursor in the required position on the chart and press ENTER to place the waypoint. The waypoint is added to the waypoint list and named using the next available number. The waypoint functions remain displayed so that you ...

  • Raymarine 420D - page 35

    3-4 RayChart 420/420D Chartplotter Selecting a waypoint Positioning the cursor over a waypoint selects that waypoint and accesses the WAYPOINT OPTIONS function bar. This enables you to go to (described in Section 3.4), edit (symbol, name, position), erase or move the waypoint. Selecting a waypoint from the Waypoint List allows you to go to and edit ...

  • Raymarine 420D - page 36

    Chapter 3: Operation 3-5 W aypoint data display Waypoint data can be viewed in two ways: you can use the cursor to select the waypoint to display the waypoint data in the status bar at the top of the screen, or you can view waypoint details on the waypoint list. To display waypoint data: Move the cursor over the waypoint. The waypoint data is displ ...

  • Raymarine 420D - page 37

    3-6 RayChart 420/420D Chartplotter 4. To edit the symbol, select EDIT SYMBOL. D4674_1 5. Use trackpad left/right to highlight the required symbol , then press ENTER . To edit a waypoint using the Waypoint List: 1. From chart mode, press ENTER ; the primary function bar is displayed. 2. Using trackpad left/right, select WAYPOINTS. 3. Select WAYPOINT ...

  • Raymarine 420D - page 38

    Chapter 3: Operation 3-7 Erasing a waypoint Note: You cannot erase a waypoint that is the target waypoint or waypoints that are also used in any saved route(s). If you try to erase a waypoint that is used in a saved route you are warned “ WAYPOINT IS USED IN ROUTE(S) AND CANNOT BE ERASED ” To delete a waypoint using the cursor: 1. Place the cur ...

  • Raymarine 420D - page 39

    3-8 RayChart 420/420D Chartplotter To move a waypoint using the Waypoint Edit functions: 1. Select the waypoint using the Waypoint List as described above. The waypoint functions are displayed. 2. To edit the waypoint position proceed as previously described in Editing the Waypoint Details. 3.3 Working with routes A route is made up of a series of ...

  • Raymarine 420D - page 40

    Chapter 3: Operation 3-9 3. Select MORE to see more functions: 4. Select MORE again to return to the first level functions. 5. Press CLEAR to return to chart mode. Creating a new r oute Note: If there is a current route on screen, it is cleared when you select MAKE ROUTE. If you are following the current route you are prompted to STOP FOLLOW. Press ...

  • Raymarine 420D - page 41

    3-10 RayChart 420/420D Chartplotter 6. Repeat steps 4 and 5 until you have placed all your waypoints. You can have up to 50 waypoints in a route. Any existing waypoint(s) can be included by placing the cursor on the waypoint(s). 7. When you have entered all your waypoints, press GOTO to complete the route. Your route is displayed on the screen and ...

  • Raymarine 420D - page 42

    Chapter 3: Operation 3-11 5. Press ENTER to finish and clear the Route List, then press CLEAR to return to the chart mode. Clearing the current r oute from the scr een To clear the current route from the screen, select CLEAR ROUTE. If the current route has not been saved, you are prompted to save it. To clear the current route from the screen: 1. S ...

  • Raymarine 420D - page 43

    3-12 RayChart 420/420D Chartplotter Displaying route leg and waypoint information To display information about a route leg, move the cursor over the leg until its data is displayed in the status bar at the top of the screen. To remove the data, move the cursor away from the route leg or press CLEAR . To display information about a route waypoint, m ...

  • Raymarine 420D - page 44

    Chapter 3: Operation 3-13 • Move a Waypoint (as described in Section 3.2) • Reverse a Route Any changes you make to the route affect only the current route, so you need to save the route if you want to keep the changes. Inserting/deleting waypoints in a route To add a waypoint to the end of a route: Note: If no current route is displayed, selec ...

  • Raymarine 420D - page 45

    3-14 RayChart 420/420D Chartplotter 6. Press CLEAR again to remove the function bar and route leg data. The new waypoint is temporarily added to the waypoint list and named with the first available waypoint number. The waypoints in the current route are re- numbered to identify the new positions. To remove a waypoint from the route using the cursor ...

  • Raymarine 420D - page 46

    Chapter 3: Operation 3-15 2. Select MORE to display the second level GOTO functions: 3. Select MORE to return to the first level functions. 4. Press CLEAR to return to the chart screen. Note: The functions differ if a FOLLOW or GOTO is already in progress ( see Stop Follow or Stop Goto ). Follow a route Note: If a route has been reversed or if a ro ...

  • Raymarine 420D - page 47

    3-16 RayChart 420/420D Chartplotter The current route is reversed on the screen and the waypoints are renumbered. To follow the reversed route: 4. Press the GOTO key. The Goto/Follow functions are displayed. 5. Press FOLLOW ROUTE. Your vessel ’ s current position becomes the origin and the first waypoint in the reversed route becomes the target w ...

  • Raymarine 420D - page 48

    Chapter 3: Operation 3-17 2. Press ENTER and select FOLLOW FROM HERE. D4687_1 FOLLOW FROM HERE EDIT WAYPOINT REMOVE WAYPOINT MOVE WAYPOINT Your vessel follows the route, using the selected waypoint as the target. 3. To return to chart mode, move the cursor away from the waypoint or press CLEAR . Advance to a waypoint When following a route you can ...

  • Raymarine 420D - page 49

    3-18 RayChart 420/420D Chartplotter Going to an individual target Rather than following a route, you can go directly to a selected target. This can be an existing waypoint, a port or the current cursor position. Go to a waypoint To navigate directly to an existing waypoint: 1. From the normal chart display either : a) Use the trackpad to position t ...

  • Raymarine 420D - page 50

    Chapter 3: Operation 3-19 Go to cursor Note: If navigation is currently in progress or if the cursor is homed (Find Ship) it is not possible to go to cursor. To navigate directly to the current cursor position: 1. Press the GOTO key and select GOTO CURSOR. The GOTO CURSOR function now has help text appended to it: D4691_1 MOVE CURSOR, "ENTER&q ...

  • Raymarine 420D - page 51

    3-20 RayChart 420/420D Chartplotter 3. Use trackpad up/down to select the required destination and press ENTER to start the GoTo, or CLEAR to cancel the operation. The operation is conducted in the same manner as for GO TO PORT above. Stop follow or stop goto To stop following the route or target point: 1. Either press the GOTO key or move the curs ...

  • Raymarine 420D - page 52

    Chapter 3: Operation 3-21 CDI display The CDI display shows Cross Track Error (XTE) and distance to waypoint presented in a ‘ runway ’ format: D4700_1 The ‘ runway ’ represents a 0.3nm width with the vessel symbol shown at the bottom. Bearing to Waypoint, Distance to Waypoint, Time to Go (TTG), Course Over Ground (COG) and Speed Over Ground ...

  • Raymarine 420D - page 53

    3-22 RayChart 420/420D Chartplotter BDI display The BDI display shows deviation from the bearing to waypoint and distance to waypoint. Cross track Error, Bearing to Waypoint, Distance to Waypoint, Time to Go, COG and SOG are also shown. Time to Go is calculated on the basis of distance to destination and velocity made good towards destination. D470 ...

  • Raymarine 420D - page 54

    Chapter 3: Operation 3-23 W aypoint data The Waypoint Data display comprises text data occupying the whole screen : D4702_1 COG 230° T TIME 13:29 12/12/99 SOG 6.8 Kts TTG 01:03 XTE 0.5 nm ETA 14:32 12/12/99 BRG 234° T RNG 12.4 nm ROUTE ROUTE 01 WPT 001 WAYPOINT STEER STARBOARD If a route is not selected, the ROUTE field displays NO ROUTE. The WAY ...

  • Raymarine 420D - page 55

    3-24 RayChart 420/420D Chartplotter If no GOTO or follow is in progress, the steering instruction is NO TARGET, no steering arrows are shown, but the rhumb line indicator is shown. The graphical XTE indication places arrows either side of the rhumb line indicator and pointing towards it, dependent on the value of XTE. The first arrow is shown when ...

  • Raymarine 420D - page 56

    Chapter 3: Operation 3-25 Time/Date Data The Time/Date display comprises text data occupying the whole screen: TIME 12:34 DATE 26/01/99 ETA (WAYPOINT) 13:37 26/01/99 TTG (WAYPOINT) 01:03 ETA (ROUTE) 14:32 27/01/99 TTG (ROUTE) 34:03 STEER STARBOARD SUNRISE 06.23 SUNSET 21.34 TODAY AT POSITION (USER SELECTED) 50 ° 45 .000 N 001 ° 06 .000 W (c) D470 ...

  • Raymarine 420D - page 57

    3-26 RayChart 420/420D Chartplotter 3.6 T ransferring waypoints and r outes Displayed waypoints Waypoints and routes can be received and transmitted via NMEA, see also Chapter 5, Section 5.4, Connecting to other equipment . The NMEA link could be to a PC. Managing database lists The SEND WAYPOINTS function sends all waypoints in the Waypoint List a ...

  • Raymarine 420D - page 58

    Chapter 3: Operation 3-27 7. To stop waypoint transfer, press ENTER . To receive waypoints and route lists: 1. Display the Waypoint List as previously described, then select WPT/ROUTE TRANSFER. 2. Select RECEIVE WAYPOINTS and press ENTER ; the text changes to STOP RECEIVING and remains selected. 3. Initiate sending waypoints on the NMEA compatible ...

  • Raymarine 420D - page 59

    3-28 RayChart 420/420D Chartplotter The following instructions assume that the track functions are displayed. Setting up a track Use the track functions to switch the track on and to specify the interval at which track points are placed. The time interval between track points can be set to 1s, 10s, 30s, 1min, 10min or 30 minutes. The distance spaci ...

  • Raymarine 420D - page 60

    Chapter 3: Operation 3-29 To set up a track: 1. Select the INTERVAL function. Use trackpad up/down to select the appropriate options to set either a time interval or a distance interval; press up to increase the interval or down to decrease the interval. 2. Use trackpad left/right to select TRACK ON and press ENTER . The TRACK ON text changes to in ...

  • Raymarine 420D - page 61

    3-30 RayChart 420/420D Chartplotter • Marks the current position as a temporary waypoint with an MOB symbol which replaces any current active waypoint and route. • Displays the MOB data box, showing the bearing and range to the MOB position, the elapsed time since the MOB was initiated and COG data. • Sends an MOB message, including bearing a ...

  • Raymarine 420D - page 62

    Chapter 4: Setting Up the Chartplotter 4-1 Chapter 4: Setting up the chartplotter 4.1 Introduction When you have installed your system and are familiar with its basic operation, you may wish to set it up to operate according to your requirements and display information according to your preferences. This is achieved using the function controls whic ...

  • Raymarine 420D - page 63

    4-2 RayChart 420/420D Chartplotter 3. Use trackpad up/down to move the highlight up or down the list. 4. When the required parameter is highlighted, use trackpad left/right to step through the settings. 5. When you have reset to the required values, press ENTER to implement the change and return to the set up function bar. 6. Press CLEAR to clear t ...

  • Raymarine 420D - page 64

    Chapter 4: Setting Up the Chartplotter 4-3 Menu Options Factory New Default Setting DATE FORMAT DD/MM/YY DD/MM/YY MM/DD/YY TIME OFFSET UTC or local offset value UTC up to ±13 hours in 1-hr steps LANGUAGE MULTI-LANGUAGE ENGLISH SIMULATOR OFF/ON OFF SIMULATED SOG 00 Kt to 99 Kt in 1 Kt steps 00 Kt SIMULATED COG 000 ° to 359 ° in 1 ° steps 000 ° ...

  • Raymarine 420D - page 65

    4-4 RayChart 420/420D Chartplotter Time offset If you wish to display local time, use the trackpad to change from UTC to the required time offset. This can be up to plus or minus 13 hours, in 1 hour steps. The default is UTC. Language Select the language in which you wish information to be displayed. The selected language is used for screen text, l ...

  • Raymarine 420D - page 66

    Chapter 4: Setting Up the Chartplotter 4-5 The Default value is zero and the selected value is retained on power down. If the simulator is switched OFF, the value is shown as dashes and no adjustment is possible. 4.3 Chart set up parameters The CHART SET UP function allows you to set up the chartplotter according to your system configuration and yo ...

  • Raymarine 420D - page 67

    4-6 RayChart 420/420D Chartplotter The following table lists the Chart Set up parameters and their options, shows the factory default setting and provides a space for you to make a note of your new default setting. Each parameter is described in the following subsections. Parameter Parameter Parameter Parameter Parameter Options Options Options Opt ...

  • Raymarine 420D - page 68

    Chapter 4: Setting Up the Chartplotter 4-7 Orientation The chart orientation is normally North Up, but can be changed to Course Up or Head Up. The orientation modes give the following displays: • North Up: The chart is displayed with north upwards. This is the default mode and is the only mode available if there is no COG data. • Course Up: The ...

  • Raymarine 420D - page 69

    4-8 RayChart 420/420D Chartplotter Autozoom will not zoom in beyond the largest cartographic scale (see also Plotter Mode ). When in MOB mode, Autozoom is selected automatically and will zoom in as far as possible, irrespective of the selection of Plotter Mode. Unless MOB is active Autozoom will not be activated if there is no cartridge or if the a ...

  • Raymarine 420D - page 70

    Chapter 4: Setting Up the Chartplotter 4-9 Chart boundaries When ON, Chart boundary lines are shown on the screen. The selected setting is retained when the unit switched off. Depth contours <5M When ON, depth contours less than 5 metres are shown. The selected setting is retained when the unit switched off. Depth contours 10M When ON, depth con ...

  • Raymarine 420D - page 71

    4-10 RayChart 420/420D Chartplotter 4.4 GPS setup The GPS set up page provides information for the status of the tracked navigation satellites plus HDOP and satellite Fix Status. It also provides the ability to set up a Differential GPS (RC420D), by manually retuning it to a different differential beacon. To select GPS Set Up: 1. Press the PAGE key ...

  • Raymarine 420D - page 72

    Chapter 4: Setting Up the Chartplotter 4-11 The D-GPS SET UP function is also displayed, together with help text: To tune a differential GPS to another beacon: 1. Press ENTER ; the Differential GPS Setup menu is displayed: 2. Using vertical trackpad movements, select MODE. 3. Using horizontal trackpad movements, alternates between MAN and AUTO; sel ...

  • Raymarine 420D - page 73

    4-12 RayChart 420/420D Chartplotter ...

  • Raymarine 420D - page 74

    Chapter 5: Installation 5-1 Chapter 5: Installation 5.1 Introduction This chapter provides instructions to assist in planning the installation of the RayChart 420 Chartplotter aboard your vessel. Note: If you wish to practice using the RayChart 420 before installation, you can connect it, via a 1A quick blow fuse, to a 12Vdc power supply and operat ...

  • Raymarine 420D - page 75

    5-2 RayChart 420/420D Chartplotter • If a suppression ferrite is attached to a cable, this ferrite should not be removed. If the ferrite needs to be removed during installation it must be reassembled in the same position. Suppr ession ferrites The following illustration shows typical cable suppression ferrites fitted to Raytheon equipment. Always ...

  • Raymarine 420D - page 76

    Chapter 5: Installation 5-3 Items Missing? If any of the above items are missing or damaged, please contact your Raytheon dealer or our Product Support Department to obtain replacement parts. Please note that missing or damaged items cannot be replaced without proof of purchase. Registering this Product When you have checked that you have all of th ...

  • Raymarine 420D - page 77

    5-4 RayChart 420/420D Chartplotter • Environment: The unit should be protected from physical damage, heat sources and excessive vibration. Although the unit is waterproof, it is good practice to mount it in a protected area away from prolonged and direct exposure to rain and/or salt spray. The dimensions of the unit, including the bracket, are sh ...

  • Raymarine 420D - page 78

    Chapter 5: Installation 5-5 5.4 Connecting to other equipment The unit transmits navigation and waypoint data on NMEA and, therefore, can be connected to an NMEA (1) compatible autopilot or compatible instrument repeater(s). The navigation data transmitted by the chartplotter is detailed in Appendix B to this handbook. ( 1 ) National Marine Electro ...

  • Raymarine 420D - page 79

    5-6 RayChart 420/420D Chartplotter The unit can be panel mounted, using the panel-mounting kit (accessory) available from your local Raytheon dealer. Panel mount the unit as follows: 1. Check the selected location for the unit. A clear, flat area at least 175mm (7in) wide by 190mm (7 ½ in) high, with at least 90mm (3 ½ in) of clearance behind the ...

  • Raymarine 420D - page 80

    Chapter 5: Installation 5-7 5.6 Cabling Introduction The following points need to be considered before installing the system cables: • The minimum requirements are a power cable and a connection from the associated GPS. Additional cables will be required if you are connecting to other equipment. • All cables should be adequately cleated and pro ...

  • Raymarine 420D - page 81

    5-8 RayChart 420/420D Chartplotter GPS Function GPS Function GPS Function GPS Function GPS Function Color Color Color Color Color +12V dc Red 0V dc Black Ground I/O White Data in from GPS Green Data out to GPS Yellow POWER/NMEA connector CAUTION: If you do not have a breaker in your power circuit, you must fit an in-line 1A quick-blow fuse to the p ...

  • Raymarine 420D - page 82

    Chapter 5: Installation 5-9 The dc power and NMEA inputs/outputs should be connected to the POWER/NMEA connector at the rear of the RayChart 420. The connector pin functions are detailed in the following table. Function Function Function Function Function Color Color Color Color Color Battery negative Black Battery positive (10.0Vdc to 18.0Vdc) Red ...

  • Raymarine 420D - page 83

    5-10 RayChart 420/420D Chartplotter System Check Before performing the functional test, check that: • All securing bolts are fully tightened and mechanical locking arrangements as specified are in place. • All connections have been made. • All connecting wires are secured and protected as necessary. Initial Switch On To switch on the display ...

  • Raymarine 420D - page 84

    Chapter 5: Installation 5-11 Checking the Chartplotter Oper ation To confirm that your chartplotter is operating correctly, perform the following checks: 1. Without a Navionics Microchart ® card fitted, verify that the world map is visible. 2. Press the trackpad left/right, up/down and check cursor movement and normal scrolling action. 3. Insert a ...

  • Raymarine 420D - page 85

    5-12 RayChart 420/420D Chartplotter ...

  • Raymarine 420D - page 86

    Chapter 6: Maintenance & Fault Finding 6-1 Chapter 6: Maintenance & fault finding This chapter provides information on routine maintenance and on possible causes of problems you may experience with your RayChart 420 Chartplotter. 6.1 Maintenance W arnings The chartplotter contains high voltage and specialised circuits only accessible to qua ...

  • Raymarine 420D - page 87

    6-2 RayChart 420/420D Chartplotter Always report any EMC-related problem to your nearest Raytheon dealer. We use such information to improve our quality standards. In some installations, it may not be possible to prevent the equipment from being affected by external influences. In general this will not damage the equipment but it can lead to spurio ...

  • Raymarine 420D - page 88

    Chapter 6: Maintenance & Fault Finding 6-3 6.3 Problem solving Prior to packing and shipping, all Raytheon products are subjected to comprehensive test and quality assurance programmes. However, if this unit should develop a fault, please refer to the following table to identify the most likely cause and the corrective action required to restor ...

  • Raymarine 420D - page 89

    6-4 RayChart 420/420D Chartplotter 6.4 Worldwide support In the first instance, contact the authorised distributor in your own country. A list of worldwide distributors is supplied with your system. Or visit the Raytheon World Wide Web site: www.raymarine.com How to contact Raytheon Marine (US) For accessories and parts Many Raytheon accessory item ...

  • Raymarine 420D - page 90

    Chapter 6: Maintenance & Fault Finding 6-5 In the event that repairs can not be obtained conveniently, product service may also be obtained by returning the unit to Raytheon ’ s Product Repair Center using the prepaid UPS shipping tag supplied with your unit to: Raytheon Product Repair Center 22 Cotton Road Unit H Nashua, NH 03063 The Product ...

  • Raymarine 420D - page 91

    6-6 RayChart 420/420D Chartplotter ...

  • Raymarine 420D - page 92

    Appendix A: Specification A-1 Appendix A: Specification CE Conforms to 89/336/EEC(EMC), EN60945:1997 Y2K Compliant Size 184mm (7.3in) x 168mm (6.7in) x 75mm (3in), excluding trunnion Weight 0.75 kg (1.65 lb) Environmental Waterproofing To CFR46; suitable for external mounting Temp Range Operating: -10 ° C to 70 ° C Temp Range Storage: -20 ° C to ...

  • Raymarine 420D - page 93

    A-2 RayChart 420/420D Chartplotter ...

  • Raymarine 420D - page 94

    Appendix B: NMEA Data B-1 Appendix B: NMEA data Connector Received Transmitted POWER/NMEA GGA, GSV, GSA, GLL, GGA, GSV, GSA, GLL, VTG, MSS, WPL, RTE, VTG, MSS, WPL, RTE XTE, APB, BWR, MSK Connector Received Transmitted GPS GGA, GSU, GSA, GLL, MSK VTG, MSS ...

  • Raymarine 420D - page 95

    B-2 RayChart420 ...

  • Raymarine 420D - page 96

    Appendix C: List of abbreviations C-1 Appendix C: List of abbreviations BD I Bearing Deviation Indicator BTW Bearing To Waypoint CD I Course Deviation Indicator COG Course Over Ground. The actual direction of your vessel ’ s movement over the ground. dGPS Differential Global Positioning System DTG Distance To Go EMC Electro-Magnetic Compatibility ...

  • Raymarine 420D - page 97

    C-2 RayChart 420/420D Chartplotter ...

  • Raymarine 420D - page 98

    Installation Template T-1 Installation T emplate TO P Drill hole 5 mm (3/16") diameter (4 positions) Drill hole 6 mm (1/4") diameter (4 positions) Drill hole 10 mm (3/8") diameter (4 positions) RayChart 420 template D4729-1 125 mm (4.92 in) 164.2 mm (6.46 in) Cut out shaded area only ...

  • Raymarine 420D - page 99

    T-2 RayChart 420 ...

  • Raymarine 420D - page 100

    Limited W arr anty Certificate Raytheon Marine Company warrants each new Light Marine/Dealer Distributor Product to be of good materials and workmanship, and will repair or exchange any parts proven to be defective in material and workmanship under normal use for a period of 2 years/24 months from date of sale to end user, except as provided below. ...

  • Raymarine 420D - page 101

    Purchased from Purchase date Dealer Address Installed by Installation date Commissioned by Owner ’ s name Mailing address This portion of card should be completed and retained by the owner. Commissioning date Stick barcode label here Factory Service Centers D4795-1 United States of America Raytheon Marine Company Recreational Products 22 Cotton R ...

Manufacturer Raymarine Category Marine GPS System

Documents that we receive from a manufacturer of a Raymarine 420D can be divided into several groups. They are, among others:
- Raymarine technical drawings
- 420D manuals
- Raymarine product data sheets
- information booklets
- or energy labels Raymarine 420D
All of them are important, but the most important information from the point of view of use of the device are in the user manual Raymarine 420D.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Raymarine 420D, service manual, brief instructions and user manuals Raymarine 420D. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Raymarine 420D.

Similar manuals

A complete manual for the device Raymarine 420D, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Raymarine 420D by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Raymarine 420D.

A complete Raymarine manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Raymarine 420D - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Raymarine 420D, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Raymarine 420D, that we can find in the current document
3. Tips how to use the basic functions of the device Raymarine 420D - which should help us in our first steps of using Raymarine 420D
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Raymarine 420D
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Raymarine 420D in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Raymarine 420D?

Use the form below

If you did not solve your problem by using a manual Raymarine 420D, ask a question using the form below. If a user had a similar problem with Raymarine 420D it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)