Manual Allied Telesis NetScreen Routers

31 pages 1.18 mb
Download

Go to site of 31

Summary
  • Allied Telesis NetScreen Routers - page 1

    C613-16098-00 REV E www .alliedtelesis.co m AlliedW ar e TM OS How T o | T oda y’ s netw ork managers often need to incorporate other vendors’ eq uipment into their networks, as companies change and gr ow . T o supp or t this challenge, Allied T elesis routers ar e designed to inter -operate with a wide range of equipment. This How T o Note det ...

  • Allied Telesis NetScreen Routers - page 2

    Page 2 | AlliedW are™ OS Ho w T o Note: VPNs with S onicW ALL r outers What information will y ou find in this document? This How T o Note begins with the following information: z "Related How T o Notes" on page 2 z "Which pr oducts and softwar e version does it apply to?" on page 2 Then it describes the configuration, in the ...

  • Allied Telesis NetScreen Routers - page 3

    Page 3 | AlliedW are™ OS Ho w T o Note: VPNs with S onicW ALL r outers The netw ork This example illustrates a NA T -T solution, which you need when one or both of the r outers are behind a NA T de vice such as some xDSL and cable modems. In this example , an Allied Te l e s i s A R 4 1 5S r outer is behind a NA T device. The follo wing diagram s ...

  • Allied Telesis NetScreen Routers - page 4

    Page 4 | AlliedW are™ OS Ho w T o Note: VPNs with S onicW ALL r outers Ho w to configur e the Allied T elesis r outer Befor e you star t 1. Install and configure the NA T de vice . 2. Access the r outer via its GUI. 3. Customise the r outer and set up vlan 1 as the LAN i nterface. Th e site-to-site VPN wizard alwa ys uses vlan 1 as the local LAN ...

  • Allied Telesis NetScreen Routers - page 5

    Page 5 | AlliedW are™ OS Ho w T o Note: VPNs with S onicW ALL r outers Create the VPN tunnel Log in as either the manager or the security officer . If you log in as the manager , the r outer changes to secure mode when y ou finish the VPN wizard and at that stage pr ompts you to log in again as the security officer . The Site-T o-Site VPN wizard ...

  • Allied Telesis NetScreen Routers - page 6

    Page 6 | AlliedW are™ OS Ho w T o Note: VPNs with S onicW ALL r outers Click on the Site-t o-Site VPN button. The wizard starts by displa ying a wel c o me me s s ag e . Click the Next button . Enter an appr opriate VPN connection name . Click the Next button . If you ha v e multiple possible W AN interfaces configure d on the router , the wizard ...

  • Allied Telesis NetScreen Routers - page 7

    Page 7 | AlliedW are™ OS Ho w T o Note: VPNs with S onicW ALL r outers Enter the public IP addr ess of the other end of the tunnel. In this example, this is 200.200.200. 1 , which is the IP addr ess of the SonicW ALL W AN interface . Note that y ou can use the T ab k ey to mov e between fields when entering the addr ess, but should not use the . ...

  • Allied Telesis NetScreen Routers - page 8

    Page 8 | AlliedW are™ OS Ho w T o Note: VPNs with S onicW ALL r outers Enter the secret k e y , which is an alphanumeric string between 2 and 64 characters long. Both r outers must u se the same secr et ke y . On the SonicW ALL r outer , this is the Site-to- Site P olicy’ s preshar ed k ey . Click the Next button . Check the s ummar y . If nece ...

  • Allied Telesis NetScreen Routers - page 9

    Page 9 | AlliedW are™ OS Ho w T o Note: VPNs with S onicW ALL r outers P eer IDs enable the routers to identify each other when they exchange secret k ey information. By default, the P eer IDs are the r outer IP addresses. This does not work when one (or both) r outers are behind a separate NA T device, because the NA T device changes the IP addr ...

  • Allied Telesis NetScreen Routers - page 10

    Page 10 | AlliedW are™ OS Ho w T o Note: VPNs with Sonic W ALL r outers Check the s ummar y . It now includes the P eer ID settings. If necessary , corr ect any settings y ou want to change. When all the settings ar e correct, click the Apply button. Security officer If y ou are logged in as the security officer , the GUI displa ys a completion m ...

  • Allied Telesis NetScreen Routers - page 11

    Page 11 | AlliedW are™ OS Ho w T o Note: VPNs with Sonic W ALL r outers Manag er If you ar e logged in as manager , the GUI displa ys a message to warn you that you will need to close y our br owser and r e-login as a security officer (see below) once you ha v e finished the wizard. Click the Finish button to finish the Wizard and sa v e the VPN ...

  • Allied Telesis NetScreen Routers - page 12

    Page 12 | AlliedW are™ OS Ho w T o Note: VPNs with Sonic W ALL r outers Ho w to configur e the SonicW ALL r outer T o configure the SonicW ALL r outer , perform the steps in the following sections: 1. "Access the Router" on page 12 2. "Customise the r outer and se t up the network" on page 15 3. "Define the LAN subnet of ...

  • Allied Telesis NetScreen Routers - page 13

    Page 13 | AlliedW are™ OS Ho w T o Note: VPNs with Sonic W ALL r outers Br owse to 1 92. 1 68. 1 68. 1 68. If y ou are using a pop-up block er , disable it for this addr ess. If y ou access the Internet thr ough a pr oxy server , se t your br owser to b ypass the pro xy for this addr ess. The login dialog box opens. The defaults are username: adm ...

  • Allied Telesis NetScreen Routers - page 14

    Page 14 | AlliedW are™ OS Ho w T o Note: VPNs with Sonic W ALL r outers The first time y ou configur e your r outer , the GUI opens at the Configuration Wizard page. After initial configuration, when you br owse to the SonicW ALL it ma y open at the System > Status page instead of the Configuration Wizard page . Click on the Wizards button in ...

  • Allied Telesis NetScreen Routers - page 15

    Page 15 | AlliedW are™ OS Ho w T o Note: VPNs with Sonic W ALL r outers Customise the r outer and set up the netw ork The follo wing steps use the Setup wizar d to begin configuring y our r outer . The first action in the Setup wizard is to enter a suitable passwor d for access to the GUI. Click the Next button. Select y our time zone , and set t ...

  • Allied Telesis NetScreen Routers - page 16

    Page 16 | AlliedW are™ OS Ho w T o Note: VPNs with Sonic W ALL r outers In this example, the SonicW ALL r outer has a permanent fix ed IP addr ess, so select the Static IP option. Then click the Next button. Enter the W AN interface’ s IP address and mask. For Gate wa y , enter the ISP’ s addre ss (see "The network" on page 3 ). For ...

  • Allied Telesis NetScreen Routers - page 17

    Page 17 | AlliedW are™ OS Ho w T o Note: VPNs with Sonic W ALL r outers Enter the IP addr ess and mask of the SonicW ALL ’ s interface to the LAN. Then click the Next button. In this step , you can set up the DHCP ser ver on this r outer to ser vice the office LAN y ou intend to connect to . Check that the wizar d has chosen an appr opriate ran ...

  • Allied Telesis NetScreen Routers - page 18

    Page 18 | AlliedW are™ OS Ho w T o Note: VPNs with Sonic W ALL r outers Check the summar y . If necessar y , use the Back button to re turn and corr ect any settings y ou want to change . When all the settings ar e corr ect, click the Apply button. The wizar d displa ys a message of congratulations. Click the Close button. 7. Check the settings ...

  • Allied Telesis NetScreen Routers - page 19

    Page 19 | AlliedW are™ OS Ho w T o Note: VPNs with Sonic W ALL r outers If you changed the r outer’ s LAN IP addr ess, y o u need to change the PC’ s address. If you turned on the r outer’ s DHCP ser ver , set th e PC to obtain its addr ess automatically . Otherwise , give the PC an address in the ne w subnet. Y ou may need to r estart the ...

  • Allied Telesis NetScreen Routers - page 20

    Page 20 | AlliedW are™ OS Ho w T o Note: VPNs with Sonic W ALL r outers Define the LAN subnet of the peer Befor e you can configure the VPN, y ou need to create an ad dress “object”. The ad dress object defines the LAN subnet of the VPN peer router—in this example, the Allied T elesis r outer . There is no wizar d for creating the ad dress ...

  • Allied Telesis NetScreen Routers - page 21

    Page 21 | AlliedW are™ OS Ho w T o Note: VPNs with Sonic W ALL r outers Select the “Custom Address Objects” vie w style , which displ a ys lists of Addr ess Groups and Addr ess Objects. There will be no custom ad dress objects defi ned yet, so both the Ad dress Gr oups and Addr ess Obje cts lists are empty . In Address Objects (the bottom sec ...

  • Allied Telesis NetScreen Routers - page 22

    Page 22 | AlliedW are™ OS Ho w T o Note: VPNs with Sonic W ALL r outers Check that the object is corr ect. If you need to change the object, click on the icon of a note and pencil at the right of the object’ s entr y . 4. Check the settings ...

  • Allied Telesis NetScreen Routers - page 23

    Page 23 | AlliedW are™ OS Ho w T o Note: VPNs with Sonic W ALL r outers Cr eate the VPN The following steps use the VPN w izard to cr eate the Soni cW ALL end of the VPN. Click on the Wizard s button in the left-hand menu to open the Configuration Wizard page, then select the VPN wizard. Click the Next button. Select the Site-to-Site option. Clic ...

  • Allied Telesis NetScreen Routers - page 24

    Page 24 | AlliedW are™ OS Ho w T o Note: VPNs with Sonic W ALL r outers Name the policy . Enter the pre-shared k ey , which must be the same as the Allied T elesis ro ut e r ’ s secr et k ey . Enter the remote peer addr ess, which is the SonicW ALL-facing side of the NA T device in this example (see "The network" on page 3 ). Click th ...

  • Allied Telesis NetScreen Routers - page 25

    Page 25 | AlliedW are™ OS Ho w T o Note: VPNs with Sonic W ALL r outers Y ou do not need to modify the default security settings. Click the Next button. Check the summar y . If necessar y , use the Back button to re turn and corr ect any settings y ou want to change. When all the settings ar e corr ect, click the Apply button. 5. Specify security ...

  • Allied Telesis NetScreen Routers - page 26

    Page 26 | AlliedW are™ OS Ho w T o Note: VPNs with Sonic W ALL r outers The wizard dis pla ys a message of congratulations. Click the Close button. The GUI displa ys the VPN > Settings page. ...

  • Allied Telesis NetScreen Routers - page 27

    Page 27 | AlliedW are™ OS Ho w T o Note: VPNs with Sonic W ALL r outers Set the VPN IKE IDs and use Main Mode Solutions with a NA T device in the tunnel path need to ha v e IKE IDs specified. For all solutions, we r ecommend using Main mod e instead of the default Aggressiv e mode . This section describes how to set both of these. On the VPN > ...

  • Allied Telesis NetScreen Routers - page 28

    Page 28 | AlliedW are™ OS Ho w T o Note: VPNs with Sonic W ALL r outers Click on the Proposals tab. Set Exchange to Main Mode . This is the pref err ed mode because it is more secur e. W e also recommend that y ou change the lifetime for the IPsec (Phase2) Pr oposal to 3600 seconds, to match the Allied T elesis ro ut e r . Click OK. Y ou ma y fin ...

  • Allied Telesis NetScreen Routers - page 29

    Page 29 | AlliedW are™ OS Ho w T o Note: VPNs with Sonic W ALL r outers Ho w to test the tunnel There ar e sev eral options for testing the tunnel. If these checks sho w that y our tunnel is not working, see the Ho w T o Note H o w To Tr o u b l e s h o o t A V i r t ual Private Network (VPN) . On the SonicW ALL r outer’ s VPN > Settings p a ...

  • Allied Telesis NetScreen Routers - page 30

    Page 30 | AlliedW are™ OS Ho w T o Note: VPNs with Sonic W ALL r outers Ho w to use the CLI instead of the GUI This section gives an example of the Allied T elesis CLI commands that y ou need to enter for the IP , fir ewall, IPsec and ISAKMP aspects of this configuration. # IP configuration enable ip add ip int=vlan1 ip=192.16 8.1.1 add ip int=et ...

  • Allied Telesis NetScreen Routers - page 31

    USA Headq u ar ters | 19800 Nor th Cr eek Parkwa y | S u ite 100 | Bothell | WA 98011 | USA | T: +1 800 424 4284 | F: +1 425 481 3895 E u r opea n Headq u ar ters | Via Motta 24 | 6830 Chiasso | Switzerla n d | T: +41 91 69769.00 | F: +41 91 69769.11 Asia-Paci f ic Headq u ar ters | 11 T ai Se ng Li n k | Si ng apor e | 534182 | T: +65 6383 3832 | ...

Manufacturer Allied Telesis Category Network Router

Documents that we receive from a manufacturer of a Allied Telesis NetScreen Routers can be divided into several groups. They are, among others:
- Allied Telesis technical drawings
- NetScreen Routers manuals
- Allied Telesis product data sheets
- information booklets
- or energy labels Allied Telesis NetScreen Routers
All of them are important, but the most important information from the point of view of use of the device are in the user manual Allied Telesis NetScreen Routers.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Allied Telesis NetScreen Routers, service manual, brief instructions and user manuals Allied Telesis NetScreen Routers. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Allied Telesis NetScreen Routers.

A complete manual for the device Allied Telesis NetScreen Routers, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Allied Telesis NetScreen Routers by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Allied Telesis NetScreen Routers.

A complete Allied Telesis manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Allied Telesis NetScreen Routers - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Allied Telesis NetScreen Routers, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Allied Telesis NetScreen Routers, that we can find in the current document
3. Tips how to use the basic functions of the device Allied Telesis NetScreen Routers - which should help us in our first steps of using Allied Telesis NetScreen Routers
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Allied Telesis NetScreen Routers
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Allied Telesis NetScreen Routers in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Allied Telesis NetScreen Routers?

Use the form below

If you did not solve your problem by using a manual Allied Telesis NetScreen Routers, ask a question using the form below. If a user had a similar problem with Allied Telesis NetScreen Routers it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)