Manual Vulcan-Hart MGCB18

12 pages 0.22 mb
Download

Go to site of 12

Summary
  • Vulcan-Hart MGCB18 - page 1

    MGCB SERIES MEDIUM DUTY GAS CHARBROILERS MODEL MGCB18 ML-103821 MGCB24 ML-103822 MGCB29 ML-103823 MGCB34 ML-103825 VULCAN-HART COMPANY, P.O. BOX 696, LOUISVILLE, KY 40201-0696, TEL. (502) 778-2791 FORM 31008 (11-96) (Formerly 990503) INST ALLA TION & OPERA TION MANUAL ...

  • Vulcan-Hart MGCB18 - page 2

    — 2 — IMPORT ANT FOR YOUR SAFETY THIS MANUAL HAS BEEN PREPARED FOR PERSONNEL QUALIFIED TO INSTALL GAS EQUIPMENT, WHO SHOULD PERFORM THE INITIAL FIELD START-UP AND ADJUSTMENTS OF THE EQUIPMENT COVERED BY THIS MANUAL. POST IN A PROMINENT LOCATION THE INSTRUCTIONS TO BE FOLLOWED IN THE EVENT THE SMELL OF GAS IS DETECTED. THIS INFORMATION CAN BE OB ...

  • Vulcan-Hart MGCB18 - page 3

    — 3 — T ABLE OF CONTENTS GENERAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Unpacking . . . . . . ...

  • Vulcan-Hart MGCB18 - page 4

    — 4 — Installation, Operation and Care of MODEL MGCB SERIES GAS CHARBROILERS PLEASE KEEP THIS MANUAL FOR FUTURE USE GENERAL Vulcan charbroilers are produced with quality workmanship and material. Proper installation, usage and maintenance of your charbroiler will result in many years of satisfactory performance. It is suggested that you thoroug ...

  • Vulcan-Hart MGCB18 - page 5

    — 5 — When installed, minimum clearance from combustible construction must be 6" at the sides and 6" at the rear; minimum clearance from non-combusible construction must be 4" at the sides and 4" at the rear. The installation location must allow adequate clearances for servicing and proper operation. A minimum front clearanc ...

  • Vulcan-Hart MGCB18 - page 6

    — 6 — Fig. 2 Fig. 1 ...

  • Vulcan-Hart MGCB18 - page 7

    — 7 — LEVELING Place a carpenter's level on top of the charbroiler. Level the charbroiler front to back and side to side by turning the adjustment screw at the bottom of each leg. GAS CONNECTIONS Gas supply connections and any pipe joint compound must be resistant to the action of propane gases. Location of the gas inlet is at the rear on ...

  • Vulcan-Hart MGCB18 - page 8

    — 8 — OPERA TION WARNING: THE CHARBROILER AND ITS PARTS ARE HOT. USE CARE WHEN OPERATING, CLEANING OR SERVICING THE CHARBROILER. CONTROLS The Thermostats regulate gas flow to the burners to maintain set temperature. BEFORE FIRST USE Clean the protective metal oils from all surfaces of the charbroiler. Use a non-corrosive, grease dissolving comm ...

  • Vulcan-Hart MGCB18 - page 9

    — 9 — TURNING THE CHARBROILER ON All burners are lit from constantly burning pilots. Turn control knobs to HI to ignite the burners. TURNING THE CHARBROILER OFF Turn control knobs to OFF. Extended Shutdown Turn control knobs to OFF. Turn the manual shutoff valve to OFF. Shut off the pilot flame by removing the pilot adjustment cap and turning t ...

  • Vulcan-Hart MGCB18 - page 10

    — 10 — CLEANING At least once a day, remove the grease pan, empty and wash it out in the same way you would any cooking utensil. "Burn off" the grease build-up on the grate daily or as dictated by use. Always use insulated gloves when handling grates or radiants to prevent burns. CAUTION: Do not cover the top of the grid grates during ...

  • Vulcan-Hart MGCB18 - page 11

    — 11 — MAINTENANCE WARNING: THE CHARBROILER AND ITS PARTS ARE HOT. USE CARE WHEN OPERATING, CLEANING OR SERVICING THE CHARBROILER. LUBRICATION All valves and thermostats must be checked and lubricated periodically by your local service agency. SERVICE AND PARTS INFORMATION To obtain service and parts information concerning this charbroiler, con ...

  • Vulcan-Hart MGCB18 - page 12

    — 12 — FORM 31008 (11-96) (Formerly 990503) PRINTED IN U.S.A. ...

Manufacturer Vulcan-Hart Category Charcoal Grill

Documents that we receive from a manufacturer of a Vulcan-Hart MGCB18 can be divided into several groups. They are, among others:
- Vulcan-Hart technical drawings
- MGCB18 manuals
- Vulcan-Hart product data sheets
- information booklets
- or energy labels Vulcan-Hart MGCB18
All of them are important, but the most important information from the point of view of use of the device are in the user manual Vulcan-Hart MGCB18.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Vulcan-Hart MGCB18, service manual, brief instructions and user manuals Vulcan-Hart MGCB18. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Vulcan-Hart MGCB18.

A complete manual for the device Vulcan-Hart MGCB18, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Vulcan-Hart MGCB18 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Vulcan-Hart MGCB18.

A complete Vulcan-Hart manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Vulcan-Hart MGCB18 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Vulcan-Hart MGCB18, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Vulcan-Hart MGCB18, that we can find in the current document
3. Tips how to use the basic functions of the device Vulcan-Hart MGCB18 - which should help us in our first steps of using Vulcan-Hart MGCB18
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Vulcan-Hart MGCB18
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Vulcan-Hart MGCB18 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Vulcan-Hart MGCB18?

Use the form below

If you did not solve your problem by using a manual Vulcan-Hart MGCB18, ask a question using the form below. If a user had a similar problem with Vulcan-Hart MGCB18 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)