Manual Homelite UT70127A

24 pages 0.75 mb
Download

Go to site of 24

Summary
  • Homelite UT70127A - page 1

    OPERA T OR’S MANU AL T rimmer / Brushcutter F3045 UT70127A SAVE THIS MANUAL FOR FUTURE REFERENCE Y our new trimmer has been engineered and manufactured to Homelite’ s high standard for dependability , ease of operation, and operator safety. Properly cared for, it will give you years of rugged, trouble-free performance. Thank you f or buying a H ...

  • Homelite UT70127A - page 2

    2 ■ ■ ■ ■ ■ Safety ......................................................................................................................... ............................................ 2 - 3 ■ ■ ■ ■ ■ Symbols ........................................................................................................................ ...

  • Homelite UT70127A - page 3

    3 ■ ■ ■ ■ ■ Inspect the unit before each use for loose fasteners, fuel leaks etc. Replace any damaged parts before use. ■ ■ ■ ■ ■ The string head or blade will rotate during carburettor adjustments. ■ ■ ■ ■ ■ It has been reported that vibrations from hand-held tools may contribute to a condition called Raynaud’s Syn- ...

  • Homelite UT70127A - page 4

    4 SYMBOLS Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and more safely. SYMBOL NAME EXPLANATION Safety Alert Symbol Indicates danger, warning or caution. It means attention!!! Your safety is involved. Rea ...

  • Homelite UT70127A - page 5

    5 SAVE THESE INSTRUCTIONS Weight W ithout fuel, cutting a ttachment ................................................................................................ .......... 5.58 Kg With blade ..................................................................................................................... ...................... 5.90 Kg With s ...

  • Homelite UT70127A - page 6

    6 UNP A CKING INSTRUCTIONS ■ ■ ■ ■ ■ Carefully remove the product from the carton. ■ ■ ■ ■ ■ Inspect the product to make sure no breakage or damage occurred during carriage. ■ ■ ■ ■ ■ Do not discard the packing material until you have inspected and operated the product. PACKING LIST FOR OWNER’S KIT ■ ■ ■ ■ ? ...

  • Homelite UT70127A - page 7

    7 ATTACHING THE POWER HEAD TO THE TRIMMER ATTACHMENT See Figure 2. REMOVING THE ATTACHMENT FROM THE POWER HEAD For removing or changing the attachment: 1 . Loosen the knob. 2. Push in the button and twist the shafts to remove and separate ends. ATTACHING THE STORAGE HANGER See Figure 3. There are two ways to hang your attachment for storage. ■ ? ...

  • Homelite UT70127A - page 8

    8 ASSEMBL Y FRONT HANDLE See Figure 4. A barrier handle should be used for ensuring the best control and maximising operator safety. 1 . Hold the top and bottom clamp snugly in position on the shaft housing so that handle will be located to the operator’s left. 2 . Insert the end of the handle between the clamps. 3 . Align the bolt holes and push ...

  • Homelite UT70127A - page 9

    9 ASSEMBL Y GRASS DEFLECTOR FOR TRIMMER USE BLADE GUARD FOR BRUSHCUTTER USE Fig. 7 Fig. 6 BENT END OF SILENCER GUARD OPENING IN REAR HOUSING SCREWS SILENCER GUARD REAR HOUSING TORQUE WRENCH SILENCER GUARD ASSEMBLY See Figure 6. 1 . Remove silencer guard and two screws from the owner’s kit. 2 . Attach the silencer guard to the rear housing. NOTE: ...

  • Homelite UT70127A - page 10

    10 ASSEMBL Y BLADE GUARD See Figure 8. 1 . Attach the blade guard to the mounting bracket; install the four screws (10-24 x 3/4 in) from the top of the mount- ing bracket through the blade guard and into the threaded mounting plates. 2 . Using the torque wrench supplied, tighten all four screws securely. NOTE: When using the string head, the string ...

  • Homelite UT70127A - page 11

    11 ASSEMBL Y BLADE GUARD BLADE CUPPED WASHER BLADE NUT HOLDING PIN Fig. 10 SPANNER (13 mm) UPPER FLANGE WASHER INSTALLING THE BLADE See Figure 10. 1 . Place the upper flange washer over the gear shaft with the hollow side towards the blade guard. 2 . Centre the blade on the upper flange, making sure the blade sits flat. Install the cupped washer wi ...

  • Homelite UT70127A - page 12

    12 FUEL AND REFUELLING HANDLING THE FUEL SAFELY ■ ■ ■ ■ ■ Always handle fuel with care. It is highly flammable. ■ ■ ■ ■ ■ Always refuel outdoors where there are no sparks and flames. Do not inhale fuel vapour. ■ ■ ■ ■ ■ Do not let petrol or oil come in contact with your skin. ■ ■ ■ ■ ■ Keep petrol and oil awa ...

  • Homelite UT70127A - page 13

    13 ADVANCING THE STRING ADVANCING STRING USING THE EZ LINE™ TAP ADVANCE SYSTEM String advance is controlled by tapping string head on grass while running engine at full throttle. 1 . Run engine at full throttle. 2 . Tap string head on ground to advance string. String advances each time the head is tapped. 3 . Several taps may be required until st ...

  • Homelite UT70127A - page 14

    14 W ARNING: Extreme care must be taken when using blades to ensure safe operation. Read the safety information for safe operation using the blade, refer to “Specific Safety Rules for Brushcutter and Blade Use” earlier in this manual. ■ Always hold brushcutter with both hands when operating. Use a firm grip on both handles. ■ Maintain your ...

  • Homelite UT70127A - page 15

    15 W ARNING: Never start or run the engine inside a closed or poorly ventilated area; breathing exhaust fumes can kill. STARTING AND STOPPING See Figures 16 and 17. NOTE: The unit is equipped with an automatic choke feature. The starting instructions for this feature are different from units with a manual choke. Be sure to read and follow the start ...

  • Homelite UT70127A - page 16

    16 ■ You may make adjustments and repairs described here. For other repairs, have the trimmer serviced by an authorised service dealer. ■ Consequences of improper maintenance may include excess carbon deposits resulting in loss of performance and discharge of black oily residue dripping from the silencer. ■ Make sure all guards, straps, defle ...

  • Homelite UT70127A - page 17

    17 STRING REPLACEMENT See Figures 20, 21, 22 and 23. 1 . Stop the engine and disconnect the sparking plug wire. Hold the string head and unscrew the spool retainer. Turn clockwise. 2 . Remove the spool from the string head. NOTE: Keep the spring attached to the spool. Remove any old string remaining on the spool. 3. Cut two pieces of string, each b ...

  • Homelite UT70127A - page 18

    18 2 1 3 S T O P S T S T OP 1 2 3 MAINTENANCE Fig. 26 AIR FILTER COVER FILTER Fig. 25 LATCH PULL COVER TO OPEN CLEANING THE EXHAUST PORT AND SILENCER Depending on the type of fuel used, the type and amount of oil used, and/or your operating conditions, the exhaust port and silencer may become blocked with carbon deposits. If you notice a power loss ...

  • Homelite UT70127A - page 19

    19 MAINTENANCE The fuel cap contains a non-serviceable filter and a check valve. A clogged fuel filter will cause poor engine perfor- mance. If performance improves when the fuel cap is loosened, the check valve may be faulty or the filter clogged. Replace fuel cap if required. SPARKING PLUG This engine uses a Champion RCJ-6Y with 0.63 mm (0.025 in ...

  • Homelite UT70127A - page 20

    20 TR OUBLESHOO TING PROBLEM POSSIBLE CAUSE SOLUTION IF THESE SOLUTIONS DO NOT SOL VE THE PROBLEM, CONT A CT Y OUR A UTHORISED SER VICE DEALER. 1. Check spark. Remove sparking plug. Reattach the sparking plug cap and lay sparking plug on metal cylinder . Pull the starter rope and watch for spark at sparking plug tip. If there is no spark, repeat te ...

  • Homelite UT70127A - page 21

    21 TR OUBLESHOO TING 1. Lubricate with silicone spray. 2 . Install more string. Refer to “String Replacement” earlier in this manual. 3 . Pull strings while alternately pressing down on and releasing spool retainer. 4 . Remove string from spool and rewind. Refer to “String Replacement” earlier in this manual. 5 . Advance string at full thro ...

  • Homelite UT70127A - page 22

    22 GUARANTEE – STATEMENT (RTSA / RTUK / RTG) All Homelite products are guaranteed from defects in material and workmanship for a period of twenty-four (24) months, effective and evidenced from date of original invoice or delivery note. Defects caused by normal wear and tear, unauthorised/improper maintenance/handling or overload are excluded from ...

  • Homelite UT70127A - page 23

    23 NO TES ...

  • Homelite UT70127A - page 24

    983000-326 5-03 OPERA T OR’S MANU AL T rimmer / Brushcutter F3045 UT70127A Ryobi T echnologies GmbH Itterpark 7 D-40724 Hilden Germany Tel.: +49 (0)2103 / 29 58 0 Fax : +49 (0)2103 / 29 58 29 info@ryobi-rtg.de Ry obi T echnologies Customer Services Anvil House T uns Lane Henley-on-Thames RG9 1SA UK Homelite / R.T .S.A BP 50012 - 95945 Roissy CDG ...

Manufacturer Homelite Category Trimmer

Documents that we receive from a manufacturer of a Homelite UT70127A can be divided into several groups. They are, among others:
- Homelite technical drawings
- UT70127A manuals
- Homelite product data sheets
- information booklets
- or energy labels Homelite UT70127A
All of them are important, but the most important information from the point of view of use of the device are in the user manual Homelite UT70127A.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Homelite UT70127A, service manual, brief instructions and user manuals Homelite UT70127A. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Homelite UT70127A.

Similar manuals

A complete manual for the device Homelite UT70127A, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Homelite UT70127A by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Homelite UT70127A.

A complete Homelite manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Homelite UT70127A - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Homelite UT70127A, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Homelite UT70127A, that we can find in the current document
3. Tips how to use the basic functions of the device Homelite UT70127A - which should help us in our first steps of using Homelite UT70127A
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Homelite UT70127A
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Homelite UT70127A in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Homelite UT70127A?

Use the form below

If you did not solve your problem by using a manual Homelite UT70127A, ask a question using the form below. If a user had a similar problem with Homelite UT70127A it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)