Manual Bosch Power Tools 15618

56 pages 3.55 mb
Download

Go to site of 56

Summary
  • Bosch Power Tools 15618 - page 1

    IMPORT ANT : IMPORT ANT : IMPORT ANTE: Read Before Using Lire avant usage Leer antes de usar Operating/Safety Instructions Consignes de fonctionnement/sécurité Instrucciones de funcionamiento y seguridad 15614 15618 For English Version Version française Versión en español See page 2 Voir page 19 Ver la página 36 1-877-BOSCH99 (1-877-267-2499) ...

  • Bosch Power Tools 15618 - page 2

    -2 - Work area safety Keep work area clean and well lit. Cluttered or dark areas invite accidents. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. Keep children and bystanders away while operating a power tool. Distraction ...

  • Bosch Power Tools 15618 - page 3

    -3- SAVE THESE INSTRUCTIONS Keep handles dry, clean and free from oil and grease. Slippery hands cannot safely c ontrol the power tool. Power tool use and care Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. Do not use the po ...

  • Bosch Power Tools 15618 - page 4

    -4- Safety Rules for Cordless Hammer Drills Hold power tools by insulated gripping surfaces when performing an operation where the cutting tools may contact hidden wiring. Contact with a “live” wire will make exposed metal parts of the tool “live” and shock the operator. Use clamps or other practical way to secure and support the workpiece ...

  • Bosch Power Tools 15618 - page 5

    Battery/Charger Before using battery charger, read all instructions and cautionary markings on (1) battery charger, (2) battery pack, and (3) product using battery. Use only the charger which accompanied your product or direct replacement as listed in the catalog or this manual. Do not substitute any other charger. Use only Bosch approved chargers ...

  • Bosch Power Tools 15618 - page 6

    -6- Do not attempt to disas- semble the battery or remove any component projecting from the battery terminals. Fire or injury may r esult. Prior to disposal, protect exposed t erminals with heavy insulating tape to prevent shorting. NICKEL-CADMIUM BATTERIES If equipped with a nickel-cadmium battery, the battery must be collected, recycled or dispos ...

  • Bosch Power Tools 15618 - page 7

    -7- IMPORTANT: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer. Symbol Name Designation/Explanation V Volts Voltage (potential) A Amperes Current Hz Hertz Frequency (cycles per second) W Watt Power kg Kilogra ...

  • Bosch Power Tools 15618 - page 8

    -8- Model number 15614 15618 Voltage rating 14.4 V 18 V No load speed 1 n 0 0-450/min n 0 0-500/min No load speed 2 n 0 0-1900/min n 0 0-2000/min Impact rate 29,000 BPM 31,000 BPM Maximum Capacities Chuck size 1/2" 1/2" Screw sizes #16 x 3" #14 x 4" Mild metal 1/2" 5/8" Hard wood 1-1/4" 1-5/8" Soft wood 1-3/4 ...

  • Bosch Power Tools 15618 - page 9

    GEAR SHIFTING Your tool is equipped with two separate gear ranges, low gear and high gear. Low gear provides high-torque and slower drilling speeds for heavy duty work or for driving screws. High gear provides faster speeds for drilling lighter work. To change speeds slide switch, to the high or low position (Fig. 1). ATTENTION: If your tool appear ...

  • Bosch Power Tools 15618 - page 10

    REMOVING CHUCK Rotate the clutch ring to the drill bit symbol “ ”. Open the chuck all the way, remove left-hand thread screw inside chuck by turning it clockwise (Fig. 7). Insert the short arm of a 1/2" hex key wrench and close jaws on flats of wrench (Fig. 8). Strike long arm of wrench sharply counterclockwise, remove wrench and unthread ...

  • Bosch Power Tools 15618 - page 11

    -11- AUXILIARY HANDLE The tool must be supported with the auxiliary handle, which can be swiveled 360˚. To reposition and/or swivel the handle, loosen the hand grip, move the handle to the desired position along the barrel and securely retighten the hand grip (Fig. 9). Release battery pack from tool by pressing on both sides of the battery release ...

  • Bosch Power Tools 15618 - page 12

    -12- CHARGING BATTERY PACK (30 MINUTE SINGLE BAY-BC130) INDICATORS, SYMBOLS AND MEANING If the indicator lights are “OFF”, the charger is not receiving power from power supply outlet. If the green indicator light is “ON”, the charger is plugged in but the battery pack is not inserted, or the battery pack is fully charged and is being trickl ...

  • Bosch Power Tools 15618 - page 13

    -13- CHARGING BATTERY PACK (30 MINUTE DUAL BAY-BC230) INDICATORS, SYMBOLS AND MEANING If the indicator lights are “OFF”, the charger is not receiving power from power supply outlet. If the red indicator light is “ON”, the battery pack is too hot or cold for fast-charging. The charger will switch to trickle charge, until a suitable temperatu ...

  • Bosch Power Tools 15618 - page 14

    -14- CHARGING BATTERY PACK (1 HOUR CHARGER) INDICATORS, SYMBOLS AND MEANING If the indicator lights are “OFF”, the charger is not receiving power from power supply outlet. If the green indicator light is “ON”, the charger is plugged in but the battery pack is not inserted, or the battery pack is fully charged and is being trickle charged, o ...

  • Bosch Power Tools 15618 - page 15

    DRILL BITS Always inspect drill bits for excessive wear. Use only bits that are sharp and in good condition. TWIST BITS: Available with straight and reduced shanks for wood and light duty metal drilling. High speed bits cut faster and last longer on hard materials. CARBIDE TIPPED BITS: Used for drilling stone, concrete, plaster, cement and other un ...

  • Bosch Power Tools 15618 - page 16

    -16- Before using an accessory, be certain that its maximum safe operating speed is not exceeded by the nameplate speed of the tool. Do not exceed the recommended wheel diameter. SANDING AND POLISHING Fine sanding and polishing require “touch”. Select the most efficient speed. When using polishing bonnets, always be sure the excess string that ...

  • Bosch Power Tools 15618 - page 17

    -17- Service NO USER SERVICEABLE PARTS INSIDE, except for the replaceable carbon brushes. Preventive maintenance performed by unauthorized personnel may result in misplacing of internal wires and components which could cause serious hazard. We recommend that all tool service be performed by a Bosch Factory Service Center or Authorized Bosch Service ...

  • Bosch Power Tools 15618 - page 18

    -18- (* = standard equipment) (** = optional accessories) * Screwdriver bit * Carrying case ** Tether hook ** 15 minute charger ** 30 minute charger (single bay) ** 30 minute charger (dual bay) ** 1 hour charger Accessories If an extension cord is necessary, a cord with a dequate size conductors that is capable of carrying the current necessary for ...

  • Bosch Power Tools 15618 - page 19

    -19- Sécurité du lieu de travail Maintenez le lieu de travail propre et bien éclairé. Les risques d’accident sont plus élevés quand on travaille dans un endroit encombré ou sombre. N’utilisez pas d’outils électroportatifs dans des atmosphères explosives, comme par exemple en présence de gaz, de poussières ou de liquides inflammable ...

  • Bosch Power Tools 15618 - page 20

    -20- Maintenez les poignées sèches et exemptes d’huile et d e graisse. O n ne pas maîtriser un outil électroportatif e n toute sécurité quand on a les mains glissantes. Utilisation et entretien des outils électroportatifs Ne forcez pas sur l’outil électroportatif. Utilisez l’outil électroportatif qui convient à la tâche à effectue ...

  • Bosch Power Tools 15618 - page 21

    -21- Consignes de sécurité pour perceuses à percussion sans c o r d o n Tenez les outils électroportatifs par les surfaces isolées de préhension en exécutant une opération au cours de laquelle les outils de coupe peuvent venir en contact avec les fils cachés. Le contact avec un fil sous tension rendra les pièces métalliques exposées de ...

  • Bosch Power Tools 15618 - page 22

    Entretien des piles -22- Avant d'utiliser le chargeur de pile, lisez toutes les consignes et tous les marquages d'avertissement sur (1) le chargeur de pile, (2) le bloc-piles et (3) le produit utilisant la pile. N'utilisez que le chargeur qui accompagnait votre produit ou remplacement direct, comme indiqué d ans le catalogue ou ce m ...

  • Bosch Power Tools 15618 - page 23

    -23- Ne tentez pas de désassembler le bloc-piles ou d’enlever tout composant faisant saillie des bornes de piles, ce qui peut provoquer un incendie ou des blessures. Avant la mise au rebut, protégez les bornes exposées à l’aide d’un ruban isolant épais pour prévenir le court-circuitage. PILES NICKEL-CADMIUM Si le produit est équipé d& ...

  • Bosch Power Tools 15618 - page 24

    -24- Symboles IMPORTANT : Certains des symboles suivants peuvent être utilisés sur votre outil. Veuillez les étudier et apprendre leur signification. Une interprétation appropriée de ces symboles vous permettra d'utiliser l'outil de façon plus efficace et plus sûre. Symbole Nom Désignation/Explication V Volts Tension (potentielle) ...

  • Bosch Power Tools 15618 - page 25

    -25- Description fonctionnelle et spécifications Débranchez le bloc-piles de l'outil avant d'effectuer tout assemblage ou réglage, ou de changer des accessoires. Ces mesures de sécurité préventives réduisent le risque d'une mise en marche accidentelle de l'outil. AVERTISSEMENT ! Perceuses à percussion sans cordon Numéro ...

  • Bosch Power Tools 15618 - page 26

    CHANGEMENT DE VITESSES Votre outil comporte deux régimes distincts, le bas régime et le haut régime. Le bas régime produit un couple élevé et des vitesses de perçage plus lentes pour le travail à grand rendement ou pour enfoncer des vis. Le haut régime produit des vitesses plus rapides pour le perçage moins exigeant. Pour changer de vites ...

  • Bosch Power Tools 15618 - page 27

    INSERTION DES FORETS Placez le levier inverseur de marche à la position centrale « OFF ». Retirez le bloc-piles et tournez l’anneau de l’embrayage jusqu’au symbole de foret « ». Tournez le manchon du mandrin dans le sens opposé à celui des aiguilles d’une montre en le regardant depuis l’extrémité mandrin, et ouvrez le mandrin pou ...

  • Bosch Power Tools 15618 - page 28

    -28- Enlevez le bloc-piles de l’outil en pinçant les deux côtés à la hauteur des touches de déverrouillage et en le tirant vers le bas. Avant d’introduire le bloc-piles, retirez le capuchon de protection de celui-ci (Fig. 10). Pour remettre le bloc dans l’outil, glissez-le dans l’ouverture jusqu’à ce qu’il se verrouille en place. ...

  • Bosch Power Tools 15618 - page 29

    -29- CHARGEMENT DU BLOC-PILES (30 MN, UNE BAIE – BC130) TÉMOINS, SYMBOLES ET SIGNIFICATION Si le témoin lumineux vert est éteint, ceci signifie que le chargeur ne reçoit pas de courant de la prise de courant. Si le voyant vert s’allume, le chargeur est branché mais le bloc-piles n’est pas en place ou le bloc-piles est pleinement chargé ...

  • Bosch Power Tools 15618 - page 30

    Branchez le cordon du chargeur dans votre prise de courant standard. Avant d’introduire le bloc-piles, retirez le capuchon de protection et introduisez le bloc- piles dans le chargeur (Fig. 11). Le témoin vert du chargeur commencera à CLIGNOTER, ce qui indique que la pile reçoit une charge rapide. La charge rapide s'arrêtera automatiquem ...

  • Bosch Power Tools 15618 - page 31

    -31- CHARGE DU BLOC-PILES (CHARGEUR DE 1 HEURE) TÉMOINS, SYMBOLES ET SIGNIFICATION Si le témoin lumineux vert est éteint, ceci signifie que le chargeur ne reçoit pas de courant de la prise de courant. Si le voyant vert s’allume, le chargeur est branché mais le bloc-piles n’est pas en place ou le bloc-piles est pleinement chargé et ne reç ...

  • Bosch Power Tools 15618 - page 32

    Consignes de fonctionnement FIXATION À L’AIDE DE VIS La procédure illustrée à la (Fig. 13) vous permettra de fixer des matériaux ensemble à l’aide de votre perceuse/tournevis sans cordon sans dénuder, fendre ni séparer le matériau. Fixez d’abord les pièces ensemble à l’aide d’une bride, et percez le premier trou aux 2/3 du diam ...

  • Bosch Power Tools 15618 - page 33

    -33- fréquemment pour enlever les copeaux sur les cannelures. Utilisez un bloc d’appui en bois pour les matériaux sus- ceptibles de voler en éclats tels que les matériaux minces. Vous percerez un trou plus net si vous relâchez la pression immédiatement avant que le foret ne traverse le bois. Terminez ensuite le trou à l’arrière. PERÇAG ...

  • Bosch Power Tools 15618 - page 34

    -34- Service CET OUTIL NE CONTIENT PAS DE PIÈCES RÉPARABLES PAR L’UTILISATEUR sauf les balais qui sont interchangeables. L’entretien préventif exécuté par des personnes non autorisés peut entraîner un positionnement erroné des composants et des fils internes, ce qui peut présenter de graves dangers. Nous recommandons de confier toute i ...

  • Bosch Power Tools 15618 - page 35

    Si un cordon de rallonge s'avère nécessaire, vous devez utiliser un cordon avec conducteurs de dimension adéquate pouvant porter le courant nécessaire à votre outil. Ceci préviendra une chute excessive de tension, une perte de courant ou une surchauffe. Les outils mis à la terre doivent utiliser des cordons de rallonge trifilaires pourv ...

  • Bosch Power Tools 15618 - page 36

    -36- Lea todas las instrucciones. Si no se siguen todas las instrucciones que aparecen a continuación, el resultado podría ser sacudidas eléctricas, incendio y/o lesiones graves. La expresión "herramienta mecánica" en todas las advertencias que aparecen a continuación se refiere a su herramienta mecánica alimentada por la red eléc ...

  • Bosch Power Tools 15618 - page 37

    -37- Si se proporcionan dispositivos para la conexión de instalaciones de extracción y recolección de polvo, asegúrese de que dichas instalaciones estén conectadas y se usen correctamente. El uso de estos dispositivos puede reducir los peligros relacionados con el polvo. Mantenga los mangos secos, limpios y libres de aceite y grasa. Las manos ...

  • Bosch Power Tools 15618 - page 38

    -38- Normas de seguridad para taladros de percusión sin cordón Sujete las herramientas mecánicas por las superficies de agarre aisladas cuando realice una operación en la que las herramientas de corte puedan entrar en contacto con cables ocultos. El contacto con un cable que tenga corriente hará que ésta pase a las partes metálicas descubier ...

  • Bosch Power Tools 15618 - page 39

    Cuidado de las baterías Antes de utilizar el cargador de baterías, lea todas las instrucciones e indicaciones de precaución que se encuentran en (1) el cargador de baterías, (2) el paquete de baterías y (3) el producto que utiliza baterías. Utilice solamente el cargador que acompañaba al el producto o un reemplazo directo según se indica en ...

  • Bosch Power Tools 15618 - page 40

    -40- No intente desarmar la batería ni quitar ninguno de los com- ponentes que sobresalen de las terminales de la batería. Se pueden producir lesiones o un incendio. Antes de tirarla, proteja las terminales que están al descubierto con cinta adhesiva aislante gruesa para prevenir cortocircuitos. BATERÍAS DE NIQUEL-CADMIO Si este producto está ...

  • Bosch Power Tools 15618 - page 41

    -41- Símbolos IMPORTANTE: Es posible que algunos de los símbolos siguientes se usen en su herramienta. Por favor, estúdielos y aprenda su significado. La interpretación adecuada de estos símbolos le permitirá utilizar la herramienta mejor y con más seguridad. Símbolo Nombre Designación/explicación V Volt Tensión (potencial) A Ampere Corr ...

  • Bosch Power Tools 15618 - page 42

    Descripción funcional y especificaciones Desconecte el paquete de batería de la herramienta antes de realizar cualquier ensamblaje, ajuste o cambio de accesorios. Dichas medidas preventivas de seguridad reducen el riesgo de arrancar la herramienta accidentalmente. ADVERTENCIA ! T aladros de percusión sin cordón - 42 - Número de modelo 15614 15 ...

  • Bosch Power Tools 15618 - page 43

    CAMBIO DE ENGRANAJES La herramienta está equipada con dos intervalos distintos de engranajes, engranaje de baja velocidad y engranaje de alta velocidad. El engranaje de baja velocidad proporciona un par motor alto y velocidades de taladrado más lentas para trabajo pesado o para apretar tornillos. El engranaje de alta velocidad proporciona velocid ...

  • Bosch Power Tools 15618 - page 44

    DESMONTAJE DEL MANDRIL Gire la anilla del embrague hasta el símbolo de broca taladradora “ ”. Abra completamente el mandril y saque el tornillo de rosca a izquierdas que está en el interior del mandril girando en el sentido de las agujas del reloj (Fig. 7). Introduzca el brazo corto de una llave hexagonal de 13 mm y cierre las mordazas sobre ...

  • Bosch Power Tools 15618 - page 45

    -45- Saque el paquete de baterías de la herramienta presionando sobre ambos lados de las lengüetas de liberación de las baterías y tire hacia abajo. Antes de introducir el paquete de baterías, quite la tapa protectora de dicho paquete de baterías (Fig. 10). Para introducir la batería, alinee la batería e introduzca el paquete de baterías e ...

  • Bosch Power Tools 15618 - page 46

    -46- INDICADORES, SIMBOLOS Y SIGNIFICADO Si la luz indicadora verde está apagada, el cargador no está recibiendo energía del tomacorriente de alimentación. Si la luz indicadora verde está “EN- CENDIDA”, el cargador está enchufado pero el paquete de baterías no está introducido o el paquete de baterías se encuentra totalmente cargado y ...

  • Bosch Power Tools 15618 - page 47

    -47- CARGA DEL PAQUETE DE BATERÍAS (CON DOS BAHIAS DE 30 MINUTOS BC230) INDICADORES, SIMBOLOS Y SIGNIFICADO Si la luz indicadora verde está apagada, el cargador no está recibiendo energía del tomacorriente de alimentación. Si la luz indicadora roja está “ENCENDIDA”, el paquete de baterías está demasiado caliente o demasiado frío para l ...

  • Bosch Power Tools 15618 - page 48

    -48- CARGA DEL PAQUETE DE BATERÍAS (CARGADOR DE 1 HORA) INDICADORES, SIMBOLOS Y SIGNIFICADO Si la luz indicadora verde está apagada, el cargador no está recibiendo energía del tomacorriente de alimentación. Si la luz indicadora verde está “EN- CENDIDA”, el cargador está enchufado pero el paquete de baterías no está introducido o el paq ...

  • Bosch Power Tools 15618 - page 49

    -49- Consejos de funcionamiento GANCHO PARA ATADURA El propósito del gancho para atadura es sujetar firmemente la herramienta cuando se trabaja en escaleras de mano, andamios o alturas elevadas, para evitar que la herramienta golpee el piso si se deja caer accidentalmente. Para obtener los mejores resultados, se recomienda usar cuerda de nylon tre ...

  • Bosch Power Tools 15618 - page 50

    Antes de utilizar un accesorio, asegúrese de que la velocidad especificada en la placa del fabricante de la herramienta no exceda la velocidad máxima de funcionamiento con seguridad de dicho accesorio. No exceda el diámetro de rueda recomendado. LIJADO Y PULIDO El lijado fino y el pulido requieren “toque”. Seleccione la velocidad más eficaz ...

  • Bosch Power Tools 15618 - page 51

    Servicio EN EL INTERIOR NO HAY PIEZAS QUE PUEDAN SER AJUSTADAS O REPARADAS POR EL USUARIO, excepto por las escobillas de carbón reemplazables. El mantenimiento preventivo realizado por personal no autorizado pude dar lugar a la colocación incorrec- ta de cables y componentes internos que podría constituir un peligro serio. Recomendamos que todo ...

  • Bosch Power Tools 15618 - page 52

    -52- (* = equipo estándar) (** = accesorios opcionales) * Broca de destornillador * Estuche de transporte ** Gancho para atadura ** Cargador de 15 minutos ** Carg ador de 30 minu tos (con bahía única) ** Cargador de 30 minutos (con dos bahías) ** Cargador de una hora Si es necesario un cordón de extensión, se debe usar un cordón con conducto ...

  • Bosch Power Tools 15618 - page 53

    Notes: -53- BM 2609932519 11-06 12/1/06 2:36 PM Page 53 ...

  • Bosch Power Tools 15618 - page 54

    -54- Remarques : BM 2609932519 11-06 12/1/06 2:36 PM Page 54 ...

  • Bosch Power Tools 15618 - page 55

    -55- Notas: BM 2609932519 11-06 12/1/06 2:36 PM Page 55 ...

  • Bosch Power Tools 15618 - page 56

    2609932519 11/06 Printed in Mexico L IMITED WARRANTY OF BOSCH PORTABLE AND BENCHTOP POWER TOOLS Robert Bosch Tool Corporation (“Seller”) warrants to the original purchaser only, that all BOSCH portable and benchtop power tools will be free from defects in material or workmanship for a period of one year from date of purchase. SELLER’S SOLE OB ...

Manufacturer Bosch Power Tools Category Cordless Drill

Documents that we receive from a manufacturer of a Bosch Power Tools 15618 can be divided into several groups. They are, among others:
- Bosch Power Tools technical drawings
- 15618 manuals
- Bosch Power Tools product data sheets
- information booklets
- or energy labels Bosch Power Tools 15618
All of them are important, but the most important information from the point of view of use of the device are in the user manual Bosch Power Tools 15618.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Bosch Power Tools 15618, service manual, brief instructions and user manuals Bosch Power Tools 15618. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Bosch Power Tools 15618.

A complete manual for the device Bosch Power Tools 15618, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Bosch Power Tools 15618 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Bosch Power Tools 15618.

A complete Bosch Power Tools manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Bosch Power Tools 15618 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Bosch Power Tools 15618, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Bosch Power Tools 15618, that we can find in the current document
3. Tips how to use the basic functions of the device Bosch Power Tools 15618 - which should help us in our first steps of using Bosch Power Tools 15618
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Bosch Power Tools 15618
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Bosch Power Tools 15618 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Bosch Power Tools 15618?

Use the form below

If you did not solve your problem by using a manual Bosch Power Tools 15618, ask a question using the form below. If a user had a similar problem with Bosch Power Tools 15618 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)