English dropdown-ico

Manual Nortel Networks VSN04

90 pages 0.21 mb
Download

Go to site of 90

Summary
  • Nortel Networks VSN04 - page 1

    Network operations systems TOPS Voice service node Log and alarm messages Release: VSN04 Status: Standard Version: 03.01 ...

  • Nortel Networks VSN04 - page 2

    ...

  • Nortel Networks VSN04 - page 3

    © Northern Telecom All rights reserved. TOPS is a trademark of Northern Telecom. TOPS VSN log and alarm messages Publication number: 450-1301-511 Document status: Standard Document version: 03.01 Document release: VSN04 Date: August 1995 Network operations systems TOPS Voice service node Log and alarm messages ...

  • Nortel Networks VSN04 - page 4

    ...

  • Nortel Networks VSN04 - page 5

    iii TOPS VSN Log and alarm messages Contents 1. Introduction 1 Collection and printing log and alarm messages 1 TOPS VSN log message format 1 Change history 4 BCS30 4 BCS31 4 BCS32 4 VSN03 4 VSN04 4 2. TOPS VSN log messages 5 3. Common TOPS VSN log messages - 0200 7 4. Common TOPS VSN log messages -0201 13 5. Common TOPS VSN log messages - 0202 19 ...

  • Nortel Networks VSN04 - page 6

    ...

  • Nortel Networks VSN04 - page 7

    1 TOPS VSN Log and alarm messages 1. Introduction Collection and printing log and alarm messages Logs and Alarms are collected for TOPS Voice Service Node (VSN) using the log and alarm subsystem installed in base TOPS VSN software. The same subsystem is responsible for creating log and alarm reports. These are stored temporarily on the TOPS VSN and ...

  • Nortel Networks VSN04 - page 8

    2 Introduction TOPS VSN Log and alarm messages Header Information For TOPS VSN Log Messages. Identifying information, also known as header information, uniquely identifies each log and alarm message. The header of every log or alarm message generated by TOPS VSN contains the following: (a) Date and Time. The date and time are displayed in the upper ...

  • Nortel Networks VSN04 - page 9

    Introduction 3 TOPS VSN Log and alarm messages Status 14 Status 14 Used for login/logout security related events. This status is now used by all logs generated from two DVS subsystems (8029 System Administration (Report #1 only, and 8039 Security Agent Sub-PRU). The logs produced from these two subsystems identify logins, logouts, changes to USERID ...

  • Nortel Networks VSN04 - page 10

    4 Introduction TOPS VSN Log and alarm messages Change history This section summarizes the important changes that affect this publication. They are arranged under the heading of the appropriate Batch Change Supplement (BCS) release. BCS30 The presentation of this publication has been changed. The following changes to the TOPS VSN application were ma ...

  • Nortel Networks VSN04 - page 11

    5 TOPS VSN Log and alarm messages 2. TOPS VSN log messages TOPS VSN log messages are separated into two groups: common logs, and PRU-specific logs. Each group generates logs from a single subsystem (in most cases a subsystem is defined by a PRU). This Publication uses separate tables for each subsystem that generates logs. The first six tables list ...

  • Nortel Networks VSN04 - page 12

    6 DNC Logs TOPS VSN Log Messages TOPS VSN Log and alarm messages The following messages are the complete, or raw messages. The log service may select only certain items from the lists shown for each message, depending on the nature of the event. ...

  • Nortel Networks VSN04 - page 13

    7 TOPS VSN Log and alarm messages 3. Common TOPS VSN log messages - 0200 0001/0000 Message: [PRU_name] has encountered a bus error. This is an unrecoverable error and the SRU where this PRU resides should be rebooted. Description: The software task failed because of a hardware error. If the PRU declares itself faulty then the log subsystem detects ...

  • Nortel Networks VSN04 - page 14

    8 Common TOPS VSN log messages (0200) TOPS VSN Log and alarm messages Description: The software task failed due to a software error. The PRU may declare itself faulty or recreate the task. If the PRU declares itself faulty then the log subsystem detects the faulty condition and raises an alarm. Action: If the PRU is in the working state, no action ...

  • Nortel Networks VSN04 - page 15

    Common Tops log messages (0200) DNC Logs 9 TOPS VSN Log and alarm messages 0001/000A Message: [PRU_name] encountered a segment or mapper error. This is an unrecoverable error and the PRU should be rebooted. If rebooting the PRU does not solve the problem, reboot the SRU. Description: The software task failed because it encountered a segment or mapp ...

  • Nortel Networks VSN04 - page 16

    10 Common TOPS VSN log messages (0200) TOPS VSN Log and alarm messages 0001/000F Message: [PRU_name] has encountered a nil pointer reference run error. This is an unrecoverable error and the PRU should be rebooted. Description: The software task failed due to a reference error. The PRU may declare itself faulty or recreate the task. Action: If the ...

  • Nortel Networks VSN04 - page 17

    Common Tops log messages (0200) DNC Logs 11 TOPS VSN Log and alarm messages Description: The software task failed because it tried to perform an exit command from a procedure it was not currently executing. The PRU may declare itself faulty or recreate the task. Action: If the PRU is in the working state, no action is required. If the PRU is in the ...

  • Nortel Networks VSN04 - page 18

    ...

  • Nortel Networks VSN04 - page 19

    13 TOPS VSN Log and alarm messages 4. Common TOPS VSN log messages -0201 0002/0000 Message: [PRU_name] has successfully communicated with [Other PRU_name]. (No error detected.) Description: The named PRUs are communicating. Action: No action is required. 0002/0001 Message: [Sending_PRU_name] was trying to communicate with [Receiving_ PRU_name] but ...

  • Nortel Networks VSN04 - page 20

    14 Common TOPS VSN log messages (0201) TOPS VSN Log and alarm messages Action: If the PRU is in the working state, no action is required. If the PRU is in the faulty state, document the problem, restart both sending and receiving PRUs, and then contact NT. 0002/0004 Message: [Sending_PRU_name] was trying to communicate with [Receiving_ PRU_name] bu ...

  • Nortel Networks VSN04 - page 21

    Common Tops log messages (0201) DNC Logs 15 TOPS VSN Log and alarm messages 0002/0008 Message: [PRU_NAME] was trying to communicate with [PRU_NAME] but could not. ->TaskResult=<task_result_num> "Diagnostic String1" "Diagnostic String2" Description: This log indicates that a communication error has occurred. Action may b ...

  • Nortel Networks VSN04 - page 22

    16 Common TOPS VSN log messages (0201) TOPS VSN Log and alarm messages Description: The sending PRU could not communicate with the receiving PRU. The latter did not accept the message. It is the responsibility of the sending PRU to recover from the error by resending the message or to declare itself faulty. Action: If the PRU is in the working stat ...

  • Nortel Networks VSN04 - page 23

    Common Tops log messages (0201) DNC Logs 17 TOPS VSN Log and alarm messages 0002/001A Message: [Sending_PRU_name] was trying to communicate with [Receiving_ PRU_name] but could not. The entry definition in [Sending_PRU_name] was not found, OR push/pull was invoked when not in entry. User action is required. Description: The sending PRU could not co ...

  • Nortel Networks VSN04 - page 24

    18 Common TOPS VSN log messages (0201) TOPS VSN Log and alarm messages Action: If the PRU is in the working state, no action is required. If the PRU is in the faulty state, then document the problem, and restart both sending and receiving PRUs. If necessary, restart the SRUs in which both PRUs reside. Record all action taken, and then contact NT. ...

  • Nortel Networks VSN04 - page 25

    19 TOPS VSN Log and alarm messages 5. Common TOPS VSN log messages - 0202 0003/0000 Message: [PRU_name] successfully performed an IO operation on pathname [file/directory_pathname]. Description: The PRU successfully completed an IO operation. Action: No action required. 0003/0001 Message: [PRU_name] received an IO error (Mixed_Access) on path [file ...

  • Nortel Networks VSN04 - page 26

    20 Common TOPS VSN log messages (0202) TOPS VSN Log and alarm messages Description: The PRU encountered an error during an IO operation on the file or directory. It is the responsibility of the PRU performing the operation to recover from the error and to retry the operation. If it is unable to do so, then it can declare itself faulty. Action: If t ...

  • Nortel Networks VSN04 - page 27

    Common Tops log messages (0202) DNC Logs 21 TOPS VSN Log and alarm messages 0003/002A Message: [PRU_name] received an IO error on path [file/directory_path name]. The error was the result of trying to save the file to disk, but the file was not opened for "writable" access. Description: The PRU encountered an error during an IO operation ...

  • Nortel Networks VSN04 - page 28

    22 Common TOPS VSN log messages (0202) TOPS VSN Log and alarm messages Description: The PRU encountered an error during an IO operation on the file or directory. The operation was not performed because it did not make its way to the server. This error is in the SRU where the PRU resides. It is the responsibility of the PRU performing the operation ...

  • Nortel Networks VSN04 - page 29

    Common Tops log messages (0202) DNC Logs 23 TOPS VSN Log and alarm messages Action: If the PRU is in the working state, no action is required. If the PRU is in the faulty state, then reboot the PRU. If the problem persists, then reboot the server which handles the IO operation. If this action doesn't correct the problem, reboot the SRU. If the ...

  • Nortel Networks VSN04 - page 30

    24 Common TOPS VSN log messages (0202) TOPS VSN Log and alarm messages Description: The PRU encountered an error during an IO operation on the file or directory. The operation was not performed. It is the responsibility of the PRU performing the operation to recover from the error and to retry the operation. If it is unable to do so, then it can de ...

  • Nortel Networks VSN04 - page 31

    Common Tops log messages (0202) DNC Logs 25 TOPS VSN Log and alarm messages 0003/006A Message: [PRU_name] received an IO error (Outside_File_Boundaries) on path [file/directory_path name]. The "server" error was the result of attempting an IO operation outside the boundaries of the file. (Accessing beyond the end of file). Description: Th ...

  • Nortel Networks VSN04 - page 32

    26 Common TOPS VSN log messages (0202) TOPS VSN Log and alarm messages Action: If the PRU is in the working state, no action is required. If the PRU is in the faulty state, then reboot the PRU. If the problem persists, then reboot the server which handles the IO operation. If neither reboot operations are successful, then reboot the whole system. D ...

  • Nortel Networks VSN04 - page 33

    Common Tops log messages (0202) DNC Logs 27 TOPS VSN Log and alarm messages Description: The PRU encountered an error during an IO operation on the file or directory. The operation was not performed. It is the responsibility of the PRU performing the operation to recover from the error and to retry the operation. If it is unable to do so, then it c ...

  • Nortel Networks VSN04 - page 34

    28 Common TOPS VSN log messages (0202) TOPS VSN Log and alarm messages 0003/0075 Message: [PRU_name] received an IO error (Object_Not_Writable) on path [file/directory_path name]. The "server" error was the result of performing a write operation on an object (or file) that can not be written to. Description: The PRU encountered an error d ...

  • Nortel Networks VSN04 - page 35

    Common Tops log messages (0202) DNC Logs 29 TOPS VSN Log and alarm messages Action: If the PRU is in the working state, no action is required. If the PRU is in the faulty state, then reboot the PRU. If the problem persists, then reboot the server which handles the IO operation. If neither reboot operations are successful, then reboot the whole syst ...

  • Nortel Networks VSN04 - page 36

    30 Common TOPS VSN log messages (0202) TOPS VSN Log and alarm messages Description: The PRU encountered an error during an IO operation on the file or directory. The operation was not performed. It is the responsibility of the PRU performing the operation to recover from the error and to retry the operation. If it is unable to do so, then it can de ...

  • Nortel Networks VSN04 - page 37

    Common Tops log messages (0202) DNC Logs 31 TOPS VSN Log and alarm messages 0003/0094 Message: [PRU_name] received an IO error (Bad_Comm_Addr) on path [file/directory_path name]. The error was the result of specifying an invalid site address. Description: The PRU encountered an error during an IO operation on the file or directory. The operation wa ...

  • Nortel Networks VSN04 - page 38

    32 Common TOPS VSN log messages (0202) TOPS VSN Log and alarm messages Action: If the PRU is in the working state, no action is required. If the PRU is in the faulty state, then reboot the PRU. If the problem persists, then reboot the server which handles the IO operation. If this action doesn't correct the problem, reboot the SRU. If the PRU ...

  • Nortel Networks VSN04 - page 39

    Common Tops log messages (0202) DNC Logs 33 TOPS VSN Log and alarm messages Action: If the PRU is in the working state, no action is required. If the PRU is in the faulty state, then reboot the PRU. If the problem persists, then reboot the server which handles the IO operation. If this action doesn't correct the problem, reboot the SRU. If the ...

  • Nortel Networks VSN04 - page 40

    34 Common TOPS VSN log messages (0202) TOPS VSN Log and alarm messages Description: The PRU encountered an error during an IO operation on the file or directory. The operation was not performed. It is the responsibility of the PRU performing the operation to recover from the error and to retry the operation. If it is unable to do so, then it can de ...

  • Nortel Networks VSN04 - page 41

    Common Tops log messages (0202) DNC Logs 35 TOPS VSN Log and alarm messages 0003/0103 Message: [PRU_name] received an IO error (Bad_Parameter) on path [file/directory_path name]. The error was the result of specifying an invalid input parameter. Description: The PRU encountered an error during an IO operation on the file or directory. The operation ...

  • Nortel Networks VSN04 - page 42

    36 Common TOPS VSN log messages (0202) TOPS VSN Log and alarm messages Action: If the PRU is in the working state, no action is required. If the PRU is in the faulty state, then reboot the PRU. If the problem persists, then reboot the server which handles the IO operation. If this action doesn't correct the problem, reboot the SRU. If the PRU ...

  • Nortel Networks VSN04 - page 43

    Common Tops log messages (0202) DNC Logs 37 TOPS VSN Log and alarm messages Description: The PRU encountered an error during an IO operation on the file or directory. The operation was not performed. It is the responsibility of the PRU performing the operation to recover from the error and to retry the operation. If it is unable to do so, then it c ...

  • Nortel Networks VSN04 - page 44

    38 Common TOPS VSN log messages (0202) TOPS VSN Log and alarm messages 0003/010E Message: [PRU_name] received an IO error (PERM_Denied) on path [file/directory_path name]. The error was the result of permission denied. Description: The PRU encountered an error during an IO operation on the file or directory. The operation was not performed. It is t ...

  • Nortel Networks VSN04 - page 45

    39 TOPS VSN Log and alarm messages 6. Common TOPS VSN log messages - 0203 0001/0000 Message: [PRU_name] encountered a VTP error [decimal]. [Two 80 character lines of optional data.] Description: The PRU encountered an communication error. The communication operation was not performed. It is the responsibility of the PRU performing the operation to ...

  • Nortel Networks VSN04 - page 46

    ...

  • Nortel Networks VSN04 - page 47

    41 TOPS VSN Log and alarm messages 7. Common TOPS VSN log messages - 020A 0001/0000 Message: [PRU_name] could not obtain sufficient memory to operate. User action is required. [Two 80 character lines of optional data.] Description: The PRU could not find enough memory to perform a function or to initialize. Action: The user should make sure that th ...

  • Nortel Networks VSN04 - page 48

    42 Common TOPS VSN log messages (020A) TOPS VSN Log and alarm messages 0001/0004 Message: [PRU_name] tried to locate [name] with the name server but failed. [Two 80 character lines of optional data.] Description: The PRU could not find the name of the PRU or task it was trying to locate using the name server facility. The PRU does not necessarily h ...

  • Nortel Networks VSN04 - page 49

    Common Tops log messages (020A) DNC Logs 43 TOPS VSN Log and alarm messages 0001/0021 Message: [PRU_name] was attempting to perform an SDM "Set Atomic Commit" and failed. Error Type = [Helix_IO_result], Error Class = [1,2,3]. [Two 80 character lines of optional data.] Description: The PRU tries to set the atomic commit for a Service Data ...

  • Nortel Networks VSN04 - page 50

    44 Common TOPS VSN log messages (020A) TOPS VSN Log and alarm messages Description: The PRU tries to start a transaction with the Service Data Manager and fails. Class error codes are: 1) run error, 2) task error, and 3) IO error. This log indicates that another user has already opened some of the required files or tables. Action: Record all inform ...

  • Nortel Networks VSN04 - page 51

    Common Tops log messages (020A) DNC Logs 45 TOPS VSN Log and alarm messages 0001/002C Message: [PRU_name] was attempting to perform an SDM "Read table" and failed. table Name = [SDM_table]. Error Type = [Helix_IO_result], Error Class = [1,2,3]. [Two 80 character lines of optional data.] Description: The PRU tries to read a Service Data Ma ...

  • Nortel Networks VSN04 - page 52

    46 Common TOPS VSN log messages (020A) TOPS VSN Log and alarm messages 0001/0031 Message: [PRU_NAME] could not interpret a triple read from the SDM. Table name = [table_name] Tuple ID = [tuple_name] "Diagnostic String1" "Diagnostic String2" Description: This log indicates an error in interpreting a field within the specified tup ...

  • Nortel Networks VSN04 - page 53

    47 TOPS VSN Log and alarm messages 8. Common TOPS VSN log messages - 0020 0001/0000 Message: [PRU_name] could not insert Control Link PRU in data structure. It is full. Maximum number of control links supported = [max_number] Description: The maximum number of controls links the system can support has been reached. The maintenance notice PRU is sti ...

  • Nortel Networks VSN04 - page 54

    ...

  • Nortel Networks VSN04 - page 55

    49 TOPS VSN Log and alarm messages 9. Voice interface resource manager log messages - 0220 0000/0000 Message: Error encountered attempting to load DTMF patterns. The symbol [symbol] is referenced in the table [table_name] but not found in the table [table_name]. Description: Applications can not access the VIs because of a reference error in an SDM ...

  • Nortel Networks VSN04 - page 56

    ...

  • Nortel Networks VSN04 - page 57

    51 TOPS VSN Log and alarm messages 10. Alarm Subsystem - 8722 0001/0001 Message: Alarm Interface Unit has RECEIVED an external alarm. External ALIU input is: <string>. Explanation: The ALIU has sensed remote activation of an alarm condition. The string stating the error is one of the following: FAN 1 FAILURE POWER CONVERTER 1 FAILURE POWER CO ...

  • Nortel Networks VSN04 - page 58

    52 Alarm Subsystem (8722) TOPS VSN Log and alarm messages Action: The system administrator must check the status of the APTIO port according to NTP 450-1011-301. If the fault has not been detected at the port, the operation of the LIU must be checked. It must also be determined if the cabling from the DNC to the LIU is intact. 0005/0002 Message: Th ...

  • Nortel Networks VSN04 - page 59

    53 TOPS VSN Log and alarm messages 11. ACPE resource manager log messages - 9440 0000/0000 Message: [PRU_name] has detected the termination of an ACPE identified as [dead_PRU_name] [dead_PRU_number]. [Number_of_calls] will be terminated. Description: An ACPE PRU has died. All calls the ACPE was processing at the time the PRU died, are lost. If the ...

  • Nortel Networks VSN04 - page 60

    54 ACPE Resource Manager Log Messages (9440) TOPS VSN Log and alarm messages Action: No action. 0000/000C Message: SET entry invoked - Changing the load on an ACPE. The ACPE was: [PRU_name] [PRU_number]. Description: The ACPE load has been set manually. This value is reset by the next interaction with the ACPE. Action: No action. 0000/000F Message: ...

  • Nortel Networks VSN04 - page 61

    ACPE Resource Manager Log Messages (9440) 55 TOPS VSN Log and alarm messages 0000/0028 Message: <PRU_name> (Tokenizer) Disk status is now lower than threshold. Will start collection. Description: Sample data collected is now written to disk. The daily audit has made room for new sample data. Call processing continues as usual and no effect to ...

  • Nortel Networks VSN04 - page 62

    56 ACPE Resource Manager Log Messages (9440) TOPS VSN Log and alarm messages Action: No action. 0001/0021 Message: [PRU_name] Non success return from tokenizer task, from INIT entry. No tokens will be issued. [Two 80 character lines of optional data.] Description: Unable to issue tokens because of unsuccessful return code from tokenizer. Call proce ...

  • Nortel Networks VSN04 - page 63

    57 TOPS VSN Log and alarm messages 12. Control link log messages - 9441 0000/0000 Message: Data Link [link_identifier] to DMS [common_language_location _identifier] is in service. Description: This log is generated when the X.25 Control Link has been reset. At initialization time this log is considered a normal occurrence. At any other time it is n ...

  • Nortel Networks VSN04 - page 64

    58 Control Link Log Messages (9441) TOPS VSN Log and alarm messages 0000/0003 Message: A Datalink message was discarded. Destination = [DMS_or_VSN]. Reason = [reason]. Message Type = [message_type]. Description: This log is generated when the X.25 Datalink software encounters a problem sending a message. The reason is one of the following: 1) Messa ...

  • Nortel Networks VSN04 - page 65

    59 TOPS VSN Log and alarm messages 13. Application call processing engine log messages - 9442 0000/0000 Message: <PRU_name>, has just become operational. Call processing capacity of this ACPE is now 24 out of 24 calls. All pending minor alarms against this ACPE PRU will be cleared. [Two 80 character lines of optional data.] Description: This ...

  • Nortel Networks VSN04 - page 66

    60 Application Call Processing Engine Log Messages (9442) TOPS VSN Log and alarm messages Description: The ACPE is beginning automatic recovery. The failure has only affected one subscriber call. If this log is generated many times in a short period of time, the ACPE has encountered a serious error and can not recover automatically. Action: No acti ...

  • Nortel Networks VSN04 - page 67

    Application Call Processing Engine Log Messages (9442) 61 TOPS VSN Log and alarm messages 0003/0001 Message: ACPE error. Unable to initialize; duplicate datafill detected during executor initialization: [duplicate_data_string] reading SDM table: [table_name]. Description: This log is generated if a duplicate string is detected by the ACPE when read ...

  • Nortel Networks VSN04 - page 68

    62 Application Call Processing Engine Log Messages (9442) TOPS VSN Log and alarm messages Description: This log is generated when to many procedure variables have been added to the ACPE data structure. The ACPE will not load. Action: Record all information and report the problem to NT. 0003/0009 Message: ACPE error. A software error has been detect ...

  • Nortel Networks VSN04 - page 69

    Application Call Processing Engine Log Messages (9442) 63 TOPS VSN Log and alarm messages 0003/000F Message: ACPE error. Unable to allocate T1 channel for call. Call was rejected. The CLLI of the DMS from which the call originated was [DMS_CLLI]. The voice channel on which the call was received was [channel_id]. Debugging Information: T1RM code: [d ...

  • Nortel Networks VSN04 - page 70

    64 Application Call Processing Engine Log Messages (9442) TOPS VSN Log and alarm messages Description: The ACPE could not determine the locality treatment for the current call because the Locality Database is either a new set of locality prompts, or a new set of locality prompts is being saved. This call will be handled according to the datafill of ...

  • Nortel Networks VSN04 - page 71

    65 TOPS VSN Log and alarm messages 14. T1 resource manager log messages - 9443 0000/0000 Message: [PRU_name] reports internal software error. [Two 80 character lines of optional data.] Description: The identified PRU is reporting a fatal internal error. The reason for the error may one of many (too many to list) but is clearly identified in the bod ...

  • Nortel Networks VSN04 - page 72

    66 T1 Resource Manager Log Messages (9443) TOPS VSN Log and alarm messages Description: A T1 Maintenance error has been reported. Action: Exit, then re-access T1 Maintenance. 0001/0000 Message: T1 Link Error for T1 SRU in Cabinet [cabinet_id], Slot [slot_id]. Condition = [string]. Error Level = [string]. Description: There is a link error for the T ...

  • Nortel Networks VSN04 - page 73

    T1 Resource Manager Log Messages (9443) 67 TOPS VSN Log and alarm messages 0003/0000 Message: [PRU_name] has cleared any outstanding T1 Voice Link Alarms. Description: This log is generated each time the PRU is rebooted. If there were alarms pending against the PRU they are cleared. Action: No action. 0003/0001 Message: Voice Link Alarm Event for T ...

  • Nortel Networks VSN04 - page 74

    ...

  • Nortel Networks VSN04 - page 75

    69 TOPS VSN Log and alarm messages 15. Locality database log messages - 944E 0000/0000 Message: The Locality Database has just become operational. Locality queries can now be processed. Any pending minor alarms against the Locality Database have been cleared. Description: This is an information message only. Action: None. 0000/0001 Message: The LDB ...

  • Nortel Networks VSN04 - page 76

    70 Locality Database Log Messages (944E) TOPS VSN Log and alarm messages Description: The diagnostic strings, which are filled by the LDB PRU, describe the nature of the problem. The problem reported may be with the custom branding information found in the Custom Brands and Carrier Brands SDM tables, or in the Locality Database brand index fields. ...

  • Nortel Networks VSN04 - page 77

    Locality Database Log Messages (944E) 71 TOPS VSN Log and alarm messages Description: A serious error was received from a system operation. If the error is a fatal error and the LDB is unable to continue processing, all queries being processed by the LDB PRU will be aborted. All MMI operations will be aborted. The first diagnostic string describes ...

  • Nortel Networks VSN04 - page 78

    ...

  • Nortel Networks VSN04 - page 79

    73 TOPS VSN Log and alarm messages 16. ACPE Maintenance Position log messages - 9445 9945/0004 Message: @1 Initialization sequence aborted. Error or inconsistency encountered while loading the ACPE Maintenance Position initialization data. xxxxx xxxxx Description: @1 is the reporting PRU, namely the ACPE Maintenance Position. xxxxx are two strings ...

  • Nortel Networks VSN04 - page 80

    ...

  • Nortel Networks VSN04 - page 81

    75 TOPS VSN Log and alarm messages 17. Prompt manager log messages - 9451 0100/0101 Message: User logged in <user name> Description: This message is informative only, confirming that the user with the <user name> has logged in. Action: None. 0100/0102 Message: User logged out <user name> Description: This message is informative on ...

  • Nortel Networks VSN04 - page 82

    76 Prompt Manager Log Messages (9451) TOPS VSN Log and alarm messages 0200/0201 Message: Forced Exit <procedure name> <reason for exit> 0200/0202 Message: Archive Failure <reason for failure> 0200/0203 Message: Restore Failure <reason for failure> 0200/0204 Message: Bad system command <procedure name> <command> 0 ...

  • Nortel Networks VSN04 - page 83

    77 TOPS VSN Log and alarm messages 18. Suppressed and Thresholded Logs This section lists the system logs which have been suppressed or thresholded. The format for suppressed logs is <Config Number> <Report Number/Error Number>. The format for thresholded logs is <Config Number> <Report Number/Error Number> <Maximum Thres ...

  • Nortel Networks VSN04 - page 84

    78 3. Suppressed and Thresholded Logs TOPS VSN Log and alarm messages 006D 00000038 File audit status 006D 00000039 OMCA: LOCATE ERROR 006D 0000003A OMCA: LOCATE ERROR (REPORTER) 0220 00000003 VIRM CLEARING ANY ALARMS 8004 00020007 COULD NOT SEND NOTIFICATION 800C 00010002 OAR, change state 800C 00010003 OAR, registration 800C 00020005 OAR, unable ...

  • Nortel Networks VSN04 - page 85

    Suppressed and Thresholded Logs 79 TOPS VSN Log and alarm messages 700 00020001 Campus resource manager 8700 00020002 Campus resource manager 8700 00020003 Campus resource manager 8700 00020004 Campus resource manager 8700 00020005 Campus resource manager 8700 00020006 Campus resource manager 8700 00020007 Campus resource manager 8700 00020008 Camp ...

  • Nortel Networks VSN04 - page 86

    80 3. Suppressed and Thresholded Logs TOPS VSN Log and alarm messages 9442 00030013 48 2 T1 release error 9442 00030014 48 2 VI release error C302 00020018 100 2 VTP return code error C302 00020010 100 2 Link Error C302 00020017 100 2 Port Error C302 0002000F 100 2 No response from peer ...

  • Nortel Networks VSN04 - page 87

    81 TOPS VSN Log and alarm messages 19. DMS notices Some events which occur in the TOPS VSN must be reported to the DMS switch. The report takes the form of a notification message. The list which follows identifies the log/alarm messages sent to the DMS. table VSNALARM on the DMS, which is datafilled by the operating company, adds severity and textu ...

  • Nortel Networks VSN04 - page 88

    ...

  • Nortel Networks VSN04 - page 89

    83 TOPS VSN Log and alarm messages 20. Abbreviations A list of abbreviations used in this Publication follows: ACPE Application call processing engine CLLI Common language location indicator DD Data dictionary DMS Digital multiplex system DNC Dynamic network control DTMF Dual tone multifrequency IEEE Institute of Electrical and Electronic Engineers ...

  • Nortel Networks VSN04 - page 90

    Network operations systems TOPS Voice service node Log and alarm messages Copyright © 1995 Northern Telecom All rights reserved. TOPS and DMS are trademarks of Northern Telecom. NTP 450-1301-511 Release: VSN04 Version: 03.01 Standard August 1995 Printed in the United States of America ...

Manufacturer Nortel Networks Category Recording Equipment

Documents that we receive from a manufacturer of a Nortel Networks VSN04 can be divided into several groups. They are, among others:
- Nortel Networks technical drawings
- VSN04 manuals
- Nortel Networks product data sheets
- information booklets
- or energy labels Nortel Networks VSN04
All of them are important, but the most important information from the point of view of use of the device are in the user manual Nortel Networks VSN04.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Nortel Networks VSN04, service manual, brief instructions and user manuals Nortel Networks VSN04. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Nortel Networks VSN04.

Similar manuals

A complete manual for the device Nortel Networks VSN04, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Nortel Networks VSN04 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Nortel Networks VSN04.

A complete Nortel Networks manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Nortel Networks VSN04 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Nortel Networks VSN04, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Nortel Networks VSN04, that we can find in the current document
3. Tips how to use the basic functions of the device Nortel Networks VSN04 - which should help us in our first steps of using Nortel Networks VSN04
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Nortel Networks VSN04
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Nortel Networks VSN04 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Nortel Networks VSN04?

Use the form below

If you did not solve your problem by using a manual Nortel Networks VSN04, ask a question using the form below. If a user had a similar problem with Nortel Networks VSN04 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)