-
Marantz PD4293D - page 1
Model PD4293D User Guide Plasma Monitor R ...
-
Marantz PD4293D - page 2
Precautions Please read this manual carefully before using your Marantz plasma monitor and keep the manual handy for future reference. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER-SERVICEABLE P ARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol warns the ...
-
Marantz PD4293D - page 3
NOTE: When you connect a computer to this monitor , attach the supplied ferrite cores. If you do not do this, this monitor will not comform to mandatory FCC standards. Attaching the ferrite cores: Set the ferrite cores on both ends of the DVI cable (not supplied), and both ends of the power cable (supplied). Close the lid tightly until the clamps c ...
-
Marantz PD4293D - page 4
Précautions V euillez lire ce manuel avec attention avant d ’ utiliser votre moniteur Plasma Monitor Marantz et conserver ce manuel à port é e de la main pour une consultation ult é rieure. A TTENTION RISQUE D ’ ELECTROCUTION NE P AS OUVRIR MISE EN GARDE : AFIN DE REDUIRE LES RISQUES D’ELECTRO- CUTION, NE P AS DEPOSER LE COUVERCLE, IL N? ...
-
Marantz PD4293D - page 5
REMARQUE: Lorsque vous branchez un micro-ordinateur sur ce moniteur , fixez les noyaux en ferrites fournis. Si vous ne le fa î tes, le moniteur ne sera pas en conformit é avec les exigences des standards FCC. Fixation des noyaux en ferrite. Monter les tores en ferrite aux deux extr ê mit é s du c â ble DVI (non fourni) et aux deux extr ê mit ...
-
Marantz PD4293D - page 6
Who is covered? Y ou must have proof of purchase to receive warranty service. What is covered? 1) W arranty coverage begins the day you purchase your Plasma T elevision, and continues for a period of one year . 2) Marantz America will provide in-home warranty repair . 3) Marantz America will incur all labor charges for repairs during the warranty p ...
-
Marantz PD4293D - page 7
Contents How to Attach Options to the Plasma Monitor .... 1 Introduction ..................................................... 2 Introduction to the Plasma Monitor ............................. 2 The features you’ll enjoy include: ............................... 2 Contents of the Package ........................................... 2 Options ..... ...
-
Marantz PD4293D - page 8
1 Y ou can attach your optional mounts or stand to the plasma monitor in one of the following two ways: * While it is upright. (See Drawing A) * As it is laid down with the screen face down (See Drawing B). Lay the protective sheet, which was wrapped around the monitor when it was packaged, beneath the screen surface so as not to scratch the screen ...
-
Marantz PD4293D - page 9
2 Introduction to the Plasma Monitor The Plasma Monitor is a seamless blend of cutting-edge visual technology and sophisticated design. At 42-inches, with a 16:9 aspect ratio, the Plasma Monitor certainly makes a big impression. However , at a mere 3.5 inches/ 89 mm thin, the monitor ’ s sleek techno-art lines blend in well with your environment. ...
-
Marantz PD4293D - page 10
3 q Power T urns the monitor ’ s power on and off. w Remote sensor window Receives the signals from the remote control. e POWER/ST ANDBY indicator When the power is on ............................. Lights green. When the power is in the standby mode ... Lights red. r INPUT SELECT / EXIT Switches the input, in the following order . The available i ...
-
Marantz PD4293D - page 11
4 Rear View/ T erminal Board A AC IN Connect the included power cord here. B EXT SPEAKER L and R Connect speakers here. Maintain the correct polarity . C RGB3 (DVI 29pin) Inputs a digital RGB signal (TMDS). D VIDEO1, 2 Connect VCR ’ s, DVD ’ s or Laser Discs, etc. here. E AUDIO1, AUDIO2, AUDIO3 These are audio input terminals. The input is sele ...
-
Marantz PD4293D - page 12
5 → VIDEO1 → VIDEO2 → VIDEO3 → VIDEO1 → VIDEO2 RC4293DPD R Remote Control q POWER ON/OFF Switches Power ON/OFF . (This does not operate when POWER/ST ANDBY indicator of the main unit is off.) w RGB/PC Press this button to select RGB/PC as the source. The available sources depend on the setting of “ BNC SELECT ” . RGB: COMP . or VIDEO: ...
-
Marantz PD4293D - page 13
6 !2 WIDE The type of broadcast is detected automatically , and the recommended wide screen is set. !3 DISPLA Y Displays the source settings on the screen. !4 OFF TIMER Activates the off timer for the unit. !5 Remote control signal transmitter T ransmits the remote control signals. Battery Installation and Replacement Insert the 2 “ AAA ” batte ...
-
Marantz PD4293D - page 14
7 POWER/STANDBY PROCEED INPUT SELECT DOWN UP LEFT/ - RIGHT/ + /EXIT VOLUME Approx. 7m / 23ft R R Operating Range * Use the remote control within a distance of about 7 m/ 23ft. from the front of the monitor ’ s remote control sensor and at horizontal and vertical angles of up to approximately 30 ° . * The remote control operation may not function ...
-
Marantz PD4293D - page 15
8 Installation RGB 3 ( Digital RG B ) VIDEO 1 VIDEO 2 REMOTE CONTROL CONTROL LOCK ON / OFF RGB 1 R/C R/P R L ( MONO ) L ( MONO ) G/Y / VIDEO 3 B/C B/P B HD VD R R Y CB / PB CR / PR L ( MONO ) R EXTERNAL CONTROL AUDIO 2 DVD1 / HD1 AUDIO 3 AUDIO 1 RGB2 / DVD2 /HD2 VCR or Laser Disc Player Document Camera DVD Player IBM VGA or Compatibles Signal cable ...
-
Marantz PD4293D - page 16
9 Connecting Y our PC or Macintosh Computer Connecting your PC or Macintosh computer to your plasma monitor will enable you to display your computer ’ s screen image for an impressive presentation. The plasma monitor supports the signals described on page 52. T o connect a PC, Macintosh or compatible graphics adapter, simply: 1. T urn off the pow ...
-
Marantz PD4293D - page 17
10 External Speaker Connections External speakers may be connected to the plasma monitor to reproduce sound from VIDEO, DVD or RGB signal sources. External speakers may be connected directly to the SPEAKERS terminals or indirectly by connecting a stereo system amplifier to the audio outputs. CAUTION: Unplug the plasma monitor and all connected comp ...
-
Marantz PD4293D - page 18
11 Pin Assignments and Signal Levels for 15 pin RGB (Analog) Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 5 4 3 2 1 15 14 13 12 11 10 9 8 7 6 RGB 3 1 9 17 2 10 18 3 11 19 4 12 20 5 13 21 6 14 22 7 15 23 8 25 26 27 28 16 24 29 Signal (Analog) Red Green or sync-on-green Blue No connection Ground Red ground Green ground Blue ground No connection Sync s ...
-
Marantz PD4293D - page 19
12 POWER T o turn the unit ON and OFF: 1. Plug the power cord into an active AC power outlet. 2. Press the POWER ON button (on the remote control) to turn on the unit. The monitor ’ s POWER/ST ANDBY indicator will light up (green) when the unit is on. 3. Press the POWER OFF button (on the remote control or the unit) to turn off the unit. The moni ...
-
Marantz PD4293D - page 20
13 OFF TIMER T o set the off timer: The off timer can be set to turn the power of f after 30, 60, 90 or 120 minutes. 1. Press the OFF TIMER button to start the timer at 30 minutes. 2. Press the OFF TIMER button to the desired time. 3. The timer starts when the menu turns off. → 30 → 60 → 90 → 120 → 0 OFF TIMER 30 T o check the remaining t ...
-
Marantz PD4293D - page 21
14 W atching with a wide screen (manual) W ith this function, you can select one of four screen sizes. When watching videos or digital video discs 1. Press the WIDE button on the remote control. 2. W ithin 3 seconds ... Press the WIDE button again. The screen size switches as follows: → ZOOM → NORMAL → FULL → ST ADIUM ZOOM size screen The p ...
-
Marantz PD4293D - page 22
15 W atching computer images with a wide screen Switch to the wide screen mode to expand the 4 : 3 image to fill the entire screen. 1. Press the WIDE button on the remote control. 2. W ithin 3 seconds ... Press the WIDE button again. The screen size switches as follows: → NORMAL → FULL NORMAL size screen (4:3 or SXGA 5:4) The picture has the sa ...
-
Marantz PD4293D - page 23
16 Menu Operations The OSM window is displayed with respect to the screen as shown on the diagram. * Depending on the screen ’ s mode, the OSM may be displayed differently . In the explanation, the OSM section is shown close up. SEL. OK EXIT EXIT PROCEED MAIN MENU PICTURE SOUND SCREEN FUNCTION OPTIONS INFORMATION The following describes how to us ...
-
Marantz PD4293D - page 24
17 Main menu Sub menu Functions Default Reset PICTURE CONTRAST Adjusts the contrast. Center Y es BRIGHTNESS Adjusts the brightness. Center Y es SHARPNESS Adjusts the sharpness. Center/1 Y es COLOR Adjusts the color . Center Y es TINT Adjusts the tint. Center Y es PICTURE MODE Sets the picture mode according to the VIDEO environment and MEMORY Y es ...
-
Marantz PD4293D - page 25
18 Picture Settings Menu Adjusting the picture The contrast, brightness, sharpness, color and tint can be adjusted as desired. Example: Adjusting the contrast Pr ess the PROCEED button on the r emote control to display the MAIN MENU on the scr een, then... 1. Use the ▲ and ▼ buttons to select “ PICTURE ” , then press the PROCEED button. The ...
-
Marantz PD4293D - page 26
19 Setting the picture mode according to the brightness of the room There are four picture modes that can be used effectively according to the environment in which you are viewing the display . Example: Setting the “THEA TER” mode Pr ess the PROCEED button on the remote contr ol to display the MAIN MENU on the scr een, then... 1. Use the ▲ an ...
-
Marantz PD4293D - page 27
20 Setting the color temperature Use this procedure to set color tone produced by the plasma display . Example: Setting “ 1 ” Pr ess the PROCEED button on the r emote control to display the MAIN MENU on the scr een, then... 1. Use the ▲ and ▼ buttons to select “ PICTURE ” , then press the PROCEED button. The “ PICTURE ” screen appea ...
-
Marantz PD4293D - page 28
21 Adjusting the color to the desired quality Use this procedure to adjust the white balance for bright pictures and dark pictures to achieve the desired color quality . Example: Adjusting the “ WHITE BALANCE ” Pr ess the PROCEED button on the r emote control to display the MAIN MENU on the scr een, then... 1. Use the ▲ and ▼ buttons to sel ...
-
Marantz PD4293D - page 29
22 Reducing noise in the picture Use these settings if the picture has noise due to poor reception or when playing video tapes on which the picture quality is poor . Example: Setting “ NR-3 ” Pr ess the PROCEED button on the r emote control to display the MAIN MENU on the scr een, then... 1. Use the ▲ and ▼ buttons to select “ PICTURE ” ...
-
Marantz PD4293D - page 30
23 Sound Settings Menu Adjusting the treble, bass and left/right balance The treble, bass and left/right balance can be adjusted to suit your tastes. Example: Adjusting the bass Pr ess the PROCEED button on the r emote control to display the MAIN MENU on the scr een, then... 1. Use the ▲ and ▼ buttons to select “ SOUND ” , then press the PR ...
-
Marantz PD4293D - page 31
24 3. Adjust using the 䊴 and 䊳 buttons. V–POSITION * If neither the 䊴 or 䊳 button is pressed within 5 seconds, the current setting is set and the previous screen reappears. T o continue making other computer image adjustments ... Repeat from step 2. 4. Once all adjustments ar e completed ... Press the EXIT button to return to the main men ...
-
Marantz PD4293D - page 32
25 Information 䡵 Adjusting the Auto Picture ON ................... The Picture ADJ and Fine Picture adjustments are made automatically . OFF ................. The Picture ADJ and Fine Picture adjustments are made manually . 䡵 Adjusting the position of the image V -POSITION ... Adjusts the vertical position of the image. H-POSITION ... Adjusts t ...
-
Marantz PD4293D - page 33
26 Adjusting the position of the menu display Use these operations to adjust the position of the menus that appear on the screen. Example: Adjusting the position of the menu display Pr ess the PROCEED button on the r emote control to display the MAIN MENU on the scr een, then... 1. Use the ▲ and ▼ buttons to select “ FUNCTION ” , then press ...
-
Marantz PD4293D - page 34
27 Setting the power management for computer images This energy-saving (power management) function automatically reduces the monitor ’ s power consumption if no operation is performed for a certain amount of time. Example: T urning the power management function on Pr ess the PROCEED button on the r emote control to display the MAIN MENU on the sc ...
-
Marantz PD4293D - page 35
28 POWER/ST ANDBY indicator Power management mode On Standby Suspend Off POWER/ST ANDBY indicator Green Orange Red Red Description Horizontal and vertical synchronizing signals are present from the computer . No horizontal synchronizing signals are sent from the computer . No vertical synchronizing signals are sent from the computer . No horizontal ...
-
Marantz PD4293D - page 36
29 Setting the gray level for the sides of the screen Use this procedure to set the gray level for the parts on the screen on which nothing is displayed when the screen is set to the 4:3 size. Example: Adjusting the “GRA Y LEVEL” Pr ess the PROCEED button on the r emote control to display the MAIN MENU on the scr een, then... 1. Use the ▲ and ...
-
Marantz PD4293D - page 37
30 Setting RGB3 ADJ. When the picture input from the RGB3 input terminal is distorted, select the most appropriate setting from among “ 1 ” , “ 2 ” , and “ 3 ” . Example: Setting “ 2 ” Pr ess the PROCEED button on the r emote control to display MAIN MENU on the scr een, then... 1. Use the ▲ and ▼ buttons to select “ FUNCTION ? ...
-
Marantz PD4293D - page 38
31 Information 䡵 PLE AUTO .............. The brightness of the screen is adjusted automatically to suit the picture quality . LOCK .............. The brightness level is set to minimum. 䡵 ORBITER OFF ................. Orbiter mode does not function. ON ................... The picture moves around the screen intermittently . 䡵 INVERSE OFF .... ...
-
Marantz PD4293D - page 39
32 The 2nd line of the “ WORKING TIME ” : → 0M ↔ 3M ↔ 6M ↔ 9M ↔ ... ↔ 57M ← The 1st line of the “ W AITING TIME ” : → 0H ↔ 1H ↔ 2H ↔ 3H ↔ ... ↔ 12H ← The 2nd line of the “ W AITING TIME ” : → 0M ↔ 3M ↔ 6M ↔ 9M ↔ ... ↔ 57M ← 6. Once the setting is completed... Press the EXIT button several times ...
-
Marantz PD4293D - page 40
33 Resetting to the default values Use these operations to restore all the picture adjustments, audio settings, to the factory default values. Refer to page 17 for items to be reset. Pr ess the PROCEED button on the r emote control to display the MAIN MENU on the scr een, then... 1. Use the ▲ and ▼ buttons to select “ FUNCTION ” , then pres ...
-
Marantz PD4293D - page 41
34 Options Settings Menu Setting the allocation of the audio connectors Setting the AUDIO 1, 2, and 3 connectors to the desired input. Example: Setting “ AUDIO 1 ” to “ VIDEO 2 ” Pr ess the PROCEED button on the r emote control to display the MAIN MENU on the scr een, then... 1. Use the ▲ and ▼ buttons to select “ OPTIONS ” , then p ...
-
Marantz PD4293D - page 42
35 Setting a computer image to the correct RGB select screen W ith the computer image, select the RGB Select mode for a moving image such as (video) mode, wide mode or digital broadcast. Example: Setting the “ RGB SELECT ” mode to “ MOTION ” Pr ess the PROCEED button on the r emote control to display the MAIN MENU on the scr een, then... 1. ...
-
Marantz PD4293D - page 43
36 Setting high definition images to the suitable screen size Use this procedure to set whether the number of vertical lines of the input high definition image is 1035 or 1080. Example: Setting the “ 1080B ” mode to “ 1035I ” Pr ess the PROCEED button on the r emote control to display the MAIN MENU on the scr een, then... 1. Use the ▲ and ...
-
Marantz PD4293D - page 44
37 Setting the language for the menus The menu display can be set to one of seven languages: Japanese, English, German, French, Swedish, Italian or Spanish. Example: Setting the menu display to “ DEUTSCH ” Pr ess the PROCEED button on the r emote control to display the MAIN MENU on the scr een, then... 1. Use the ▲ and ▼ buttons to select ? ...
-
Marantz PD4293D - page 45
38 4. Once the setting is completed ... Press the EXIT button to return to the main menu. T o delete the main menu, press the EXIT button once more. The color system is set to “ 3.58 NTSC ” . Information 䡵 Video signal formats Different countries use dif ferent formats for video signals. Set to the format used in your current country . AUT O1 ...
-
Marantz PD4293D - page 46
39 External Control Application These specifications cover the communications control of the plasma monitor by external equipment. Connections Connections are made as described below . plasma monitor External equipment e.g., P ersonal computer R 1) Connector on the plasma monitor side: EXTERNAL CONTROL connector . T ype of connector: D-Sub 9-pin ma ...
-
Marantz PD4293D - page 47
40 Command Reference List CMD1 CMD2 LEN 01. Power ON 9FH 4EH 00H 02. Power OFF 9FH 4FH 00H 03. Input Switch Change DFH 47H 01H 04. VOLUME Gain Data DFH 7FH 03H 05. AUDIO Mute On 9FH 3EH 00H 06. AUDIO Mute Off 9FH 3FH 00H 07. CONTRAST Gain Data DFH 7FH 03H 08. BRIGHT Gain Data DFH 7FH 03H 09. SHARPNESS Gain Data DFH 7FH 03H 10. Color Gain Data DFH 7 ...
-
Marantz PD4293D - page 48
41 04. VOLUME Gain Data Function The external control equipment changes the VOLUME gain data of the plasma monitor . T ransmission Data DFH 80H 60H 7FH 03H DA T A00 DA T A01 DA T A02 CK S DA T A00: USER SOUND Gain Flag 05H DA T A01: VOLUME Gain Flag 01H DA T A02: VOLUME Gain 00H: Step 0 0AH: Step 10 (Default) 2AH: Step 42 ACK 7FH 60H 80H 7FH 02H DA ...
-
Marantz PD4293D - page 49
42 10. COLOR Gain Data Function The external control equipment changes the COLOR gain data of the plasma monitor . T ransmission Data DFH 80H 60H 7FH 03H DA T A00 DA T A01 DAT A02 CKS DA T A00: USER PICTURE Gain Flag 01H DA T A01: COLOR Gain Flag 04H DA T A02: COLOR Gain E0H: -32 * COLOR Gain is from -22 (EAH) to +22 (16H) only during video. FFH: - ...
-
Marantz PD4293D - page 50
43 15. GREEN Gain Data Function The external control equipment changes the GREEN Gain Data of the plasma monitor . T ransmission Data DFH 80H 60H 7FH 04H DA T A00 to DA T A03 CKS DA T A00: USER PICTURE Gain Flag 01H DA T A01: GREEN Gain Flag 02H DA T A02: GREEN Gain 1 (Bias) D8H: -40 FFH: -1 00H: 0 IEH: +30 DA T A03: GREEN Gain2 (Drive) D8H: -40 FF ...
-
Marantz PD4293D - page 51
44 20. BALANCE Gain Data Function The external control equipment changes the BALANCE gain data of the plasma monitor . T ransmission Data DFH 80H 60H 7FH 03H DA T A00 DA T A01 DAT A02 CKS DA T A00: USER PICTURE Gain Flag 05H DA T A01: BALANCE Gain Flag 02H DA T A02: BALANCE Gain EAH: -22 FFH: -01 00H: 0 01H: +01 16H: +22 ACK 7FH 60H 80H 7FH 02H DA ...
-
Marantz PD4293D - page 52
45 26. AUTO PICTURE Select Function The external control equipment switches on or off the AUTO PICTURE of the plasma monitor . T ransmission Data DFH 80H 60H 7FH 03H DA T A00 DA T A01 DAT A02 CKS DA T A00: USER PICTURE Gain Flag 03H DA T A01: AUTO PICTURE Select Flag 09H DA T A02: 00H: ON 01H: OFF ACK 7FH 60H 80H 7FH 03H DA T A00 DA T A01 DAT A02 C ...
-
Marantz PD4293D - page 53
46 30. OSM ADJ. Gain Data Function The external control equipment sets the position of the OSM menu of the plasma monitor . T ransmission Data DFH 80H 60H 1AH 02H DA T A00 DA T A01 CKS DA T A00: OSM ADJ. Gain Flag 02H DA T A01: 01H: 1 06H: 6 ACK 7FH 60H 80H 1AH 01H DA T A00 CKS DA T A00: OSM ADJ. Gain Flag 02H 31. POWER MGT Select Function The exte ...
-
Marantz PD4293D - page 54
47 36. INVERSE Set Function The external control equipment sets the INVERSE (inverse of image brightness) and the WHITE of the plasma monitor . T ransmission Data DFH 80H 60H C7H 03H DA T A00 DA T A01 DAT A02 CKS DA T A00 : INVERSE/WHITE 00H: No operation 01H: ON(INVERSE) 02H: OFF 03H: WHITE DA T A01 : WORKING TIME 00H: ON 01H: 03M (minutes) 02H: 0 ...
-
Marantz PD4293D - page 55
48 40. BNC SELECT Function The external control equipment sets the BNC SELECT of the plasma monitor . T ransmission Data DFH 80H 60H 8CH 01H DA T A00 CKS DA T A00 : BNC SELECT 01H: RGB 02H: Component 03H: Video ACK The plasma monitor returns the following ACK when setting the BNC SELECT : 7FH 60H 80H 8CH 01H DA T A00 CKS DA T A00 : BNC SELECT 01H: ...
-
Marantz PD4293D - page 56
49 45. FREQUENCY Request Function The external control equipment inquires the Horizontal frequency , Vertical frequency , Horizontal sync polarity , Vertical sync polarity , Mode, and Resolution of the plasma monitor . T ransmission Data 1FH 80H 60H 26H 00H CKS ACK 7FH 60H 80H 26H 0BH DA T A00 to DA T A10 CKS Horizontal frequency DA T A00: Integer ...
-
Marantz PD4293D - page 57
50 47. VIDEO ADJ Request Function The display returns the video adjustments information by the external control equipment ’ s request. T ransmission Data 1FH 80H 60H 45H 00H CKS ACK 7FH 60H 80H 45H 0CH DA T A00 to DA T A11 CKS DA T A00: RED Gain(Bias) D8H: -40 FFH: -1 00H: 0 IEH: +30 DA T A01: GREEN Gain(Bias) D8H: -40 FFH: -1 00H: 0 IEH: +30 DA ...
-
Marantz PD4293D - page 58
51 48. Audio Select Request Function The external control equipment inquires the current combinations of audio and video inputs for the plasma monitor . T ransmission Data 1FH 80H 60H 6FH 00H CKS ACK The plasma monitor returns the following ACK: 7FH 60H 80H 6FH 03H DA T A00 DA T A01 DA T A02 CKS DA T A00: AUDIO 1 01H – 0CH: VISUAL INPUT DA T A DA ...
-
Marantz PD4293D - page 59
52 Screen mode T able of Signals Suppor ted Suppor ted resolution • When the screen mode is NORMAL, each signal is converted to a 640 dots ⳯ 480 lines signal. (Except for * 2, * 4 ) • When the screen mode is FULL, each signal is converted to a 853 dots ⳯ 480 lines signal. (Except for * 3 ) Computer input signals supported by this system Dot ...
-
Marantz PD4293D - page 60
53 *1 Only when using a graphic accelerator board that is capable of displaying 852 ⳯ 480. *2 Display only 400 lines with the screen center of the vertical orientation located at the center . *3 The picture is displayed in the original resolution. The picture will be compressed for other signals. *4 Aspect ratio is 5:4. This signal is converted t ...
-
Marantz PD4293D - page 61
54 Symptom Picture is disturbed. Sound is noisy . Remote control operates erroneously . The remote control does not work. Monitor ’ s power does not turn on when the remote control ’ s power button is pressed. Monitor does not operate when the remote control ’ s buttons are pressed. No sound or picture is produced. Picture appears but no soun ...
-
Marantz PD4293D - page 62
55 Specifications Product Name SLIM SERIES Plasma Monitor Product Code PD4293D Screen Size 36.3"(H) ⳯ 20.4"(V) inches 921(H) ⳯ 518(V) mm diagonal 42" Aspect Ratio 16 : 9 Resolution 853(H) ⳯ 480(V) pixels Pixel Pitch 0.04"(H) ⳯ 0.04"(V) inches 1.08(H) ⳯ 1.08(V) mm Color Reproduction 256 levels, 16,770,000 colors Si ...
-
Marantz PD4293D - page 63
...
-
Marantz PD4293D - page 64
Printed in Japan 09/2001 MITar 07AW851210 COUNTRY COMPANY ADDRESS ALGERIE Azur 2000 8, Lotissement Ben Hatadi, Alger, Algerie ARMENIA NGYIG Ltd. 47 A/75 St. Lalaiants, 375000 Yerevan, Armenia AUSTRALIA Jamo Australia Pty. Ltd., 24 Lionel Road, Mt. Waverley, VIC 3149, Australia AUSTRIA Huber & Prohaska GmbH Taborstra ß e 95 / Ladestra ß e 1, G ...
Do you have a question concerning Marantz PD4293D?
Use the form below
If you did not solve your problem by using a manual Marantz PD4293D, ask a question using the form below. If a user had a similar problem with Marantz PD4293D it is likely that he will want to share the way to solve it.