Manual Miele T 4819 Ci L

64 pages Not applicable
Download

Go to site of 64

Summary
  • Miele T 4819 Ci L - page 1

    Operating instructions for condenser tumble dryer T 4819 Ci To avoid the risk of accidents or damage to the appliance it is essential to read these instructions before it is installed and used for the first time. M.-Nr. 07 844 000 e n-G B ...

  • Miele T 4819 Ci L - page 2

    Disposal of the packing material The transport and protective packing has been selected from materials which are environmentally friendly for disposal and should be recycled. Ensure that any plastic wrappings, bags, etc are disposed of safely and kept out of the reach of babies and young children. Danger of suffocation. Disposal of your old applian ...

  • Miele T 4819 Ci L - page 3

    Caring for the environment ..........................................2 Warning and Safety instructions .....................................6 Operating the tumble dryer .........................................1 0 Control panel .....................................................1 0 Notes on laundry care ........................................... ...

  • Miele T 4819 Ci L - page 4

    Cleaning and care ................................................2 2 Emptying the condensed water container ...................................................2 2 Cleaning the fluff filters .............................................2 3 Cleaning them whilst dry .........................................2 3 Cleaning them with water ............... ...

  • Miele T 4819 Ci L - page 5

    Fitting the front panel ...............................................4 1 Front panel dimensions ..........................................4 1 Fitting the front panel ............................................4 1 Fitting a door front panel made by another manufacturer ...................4 2 Preparing the front panel ............................. ...

  • Miele T 4819 Ci L - page 6

    ~ It is essential to read these instructions. This tumble dryer conforms to current safety requirements. Inappropriate use can, however, lead to personal injury and damage to property. To avoid the risk of accidents and damage to the tumble dryer, please read these instructions carefully before using it for the first time. They contain important in ...

  • Miele T 4819 Ci L - page 7

    Technical safety ~ Before setting up the tumble dryer, check it for any externally visible damage. Do not install or use a damaged tumble dryer. ~ Before connecting the tumble dryer, ensure that the connection data on the data plate (voltage and connected load) match the mains electricity supply. If in any doubt, consult a qualified electrician. ~ ...

  • Miele T 4819 Ci L - page 8

    Correct use ~ To prevent the risk of fire, the following textiles must not be dried in this tumble dryer: – items which have not been washed. – items, such as workwear, which have not been thoroughly cleaned and which are still soiled with grease, oil or other deposits (such as cosmetics, lotions etc). If items have not been thoroughly cleaned ...

  • Miele T 4819 Ci L - page 9

    ~ The dryer must not be used without the fluff filters in place or if the fluff filters are damaged in any way. ~ The fluff filters must be cleaned regularly. ~ The dryer must not be used without the condenser unit in place. ~ The fluff filters must be thoroughly dried after cleaning. Damp or wet filters could cause operational faults. ~ Do not ins ...

  • Miele T 4819 Ci L - page 10

    Control panel a Low temperature button Delicate fabrics are dried at a lower temperature. b Drying level button with indicator lights to show the drying level selected. c Display See next page. d Delay start button This button is used for: - Delaying the start of a programme - Selecting the duration of the timed drying Warm air programme e Buzzer b ...

  • Miele T 4819 Ci L - page 11

    The display shows: – Programme duration – Programme stage Drying Cooling down Finish – Check and fault messages The following are also selected via the display: – Duration of the Warm air and Cool air programmes – Delay start You can select a programme and set it to start at a later time. The programme will start automatically once the de ...

  • Miele T 4819 Ci L - page 12

    Garment care label symbols Drying q Normal/higher temperature r Reduced temperature: Select Low temperature (for delicate textiles) s Do not tumble dry Ironing I Very hot H Hot G Warm J Do not iron Tips on drying – Always observe the maximum recommended loads given in the "Programme chart". Never overload the drum. Overloading can cause ...

  • Miele T 4819 Ci L - page 13

    Brief instructions The headings numbered ( A , B , C ...) show the operating sequence and can be used as a brief guide to using your dryer. A Sort the laundry To ensure an even drying result separate out the washed laundry and sort it according to: . . . the drying level required . . . the type of fibre or weave . . . size . . . the moisture conten ...

  • Miele T 4819 Ci L - page 14

    D Select a programme ^ Select the programme you want. The indicator for the programme selected will light up. A drying level or extra option indicator may also light up and the duration may also be displayed. Drying level programmes – Cottons, Minimum iron, Delicates, Proofing, Express, Automatic plus, Denim, Shirts, Gentle smoothing ^ Press the ...

  • Miele T 4819 Ci L - page 15

    F Start the programme The Start/Stop button will flash when a programme is being selected. The flashing indicates that a programme can be started. ^ Press the Start/Stop button. The Start/Stop button will now light up constantly. Drying will appear in the display and the Perfect Dry* indicator will flash. The indicator will go out after approx. 1 m ...

  • Miele T 4819 Ci L - page 16

    Extra options Low temperature Delicate and minimum iron fabrics with the r symbol on the care label (e.g. acrylic garments) are dried at a lower temperature. The programme duration is longer. On some programmes Low temperature is permanently activated and so cannot be deselected. Buzzer A buzzer sounds (at intervals for a maximum of 1 hr) to let yo ...

  • Miele T 4819 Ci L - page 17

    Cottons Max. load 6 kg* Extra dry, Normal** Fabric Single and multi-layered cotton fabrics such as towelling, T-shirts, underwear, flannelette bed linen and baby clothes Note – Select Extra dry for multi-layered and very thick fabrics. – Do not use Extra dry for loopknit fabrics (e.g. T-shirts, underwear, baby clothes), as they have a tendency ...

  • Miele T 4819 Ci L - page 18

    Woollens handcare Max. load 2 kg* Fabric Woollen fabrics Note – This programme only fluffs up woollen garments. They are not dried completely by this programme. – Remove garments as soon as the programme has finished and leave to finish drying at room temperature. Low temperature Low temperature cannot be deselected. Proofing Max. load 2 kg* No ...

  • Miele T 4819 Ci L - page 19

    Shirts Max. load 2 kg* Normal, Hand iron Fabric Shirts and blouses. Low temperature Select the Low temperature option for delicate fabrics with the r symbol on the care label. Cool air Max. load 6 kg* Fabric Any item which only needs airing. Warm air Max. load 6 kg* Items – Voluminous and multi-layered fabrics whose layers have different drying c ...

  • Miele T 4819 Ci L - page 20

    Once a programme has started - changing the programme You cannot change to another programme once a programme has started (this prevents unintentional alterations). You will need to cancel the current programme before you can select a new one. - cancelling the programme and then selecting a different programme ^ Press the Start/Stop button. The ite ...

  • Miele T 4819 Ci L - page 21

    The system lock prevents the dryer being used without your knowledge. It can be activated if wished. The dryer's electronics are then locked. The dryer can still be switched on but a programme cannot be started. – If an attempt is made to start a programme, the indicator light for the Low temperature button will come on and a key symbol 0-§ ...

  • Miele T 4819 Ci L - page 22

    Emptying the condensed water container The condensed water will be collected in the condensed water container unless the dryer has been connected for external drainage (see "Installation"). Empty the condensed water container after every drying programme. The Empty container indicator will light up if the maximum level of the condensed wa ...

  • Miele T 4819 Ci L - page 23

    Cleaning the fluff filters The fluff which is created by the drying process is collected by the fluff filters in the door and the door opening. Clean the filters after each drying programme*. Cleaning them whilst dry Tip: You can also use a vacuum cleaner to remove the fluff. ^ Open the door and pull the fluff filter (1) out of the door as illustra ...

  • Miele T 4819 Ci L - page 24

    Cleaning them with water If there is a great deal of compacted fluff on any of the filters, they can be removed and cleaned under hot running water. ^ Open the door and pull the fluff filter out of the door as described previously. The two filters in the door opening can also be removed if you need to clean them with water. ^ Turn dial a and pull t ...

  • Miele T 4819 Ci L - page 25

    Cleaning the tumble dryer Disconnect the tumble dryer from the mains electricity supply. Miele branded cleaning and conditioning products are available to order via the internet on www.miele-shop.com. ^ Clean the housing and control panel with a slightly damp cloth and a mild detergent or soapy water. ^ The drum and other stainless steel parts can ...

  • Miele T 4819 Ci L - page 26

    Cleaning the condenser unit Detergent residue, hair and fine fluff from the dryer can get through the fluff filters and block the condenser unit. Dust from the room in which the dryer is installed can also get into the condenser unit and cause a blockage. Check the condenser unit at least once a year. Always check it if the Clean out airways indica ...

  • Miele T 4819 Ci L - page 27

    ^ Pull the condenser unit out of its housing by the handle. Checking the condenser unit ^ Hold the condenser unit up to the light as shown . ^ Check to see if there is any fluff inside it. The arrows in the illustration above indicate where to look. If you cannot see any fluff: ^ Replace the condenser unit (see following page). If you can see some ...

  • Miele T 4819 Ci L - page 28

    ^ Then flush the unit through from the front. ^ Check the condenser unit again for any visible fluff and if necessary flush it through again until it has all gone. ^ Also make sure the rubber seals are clean. The rubber seals must not be removed and must be free of kinks. Checking and cleaning the condenser unit housing ^ Remove any soiling still v ...

  • Miele T 4819 Ci L - page 29

    With the help of the following notes, minor faults in the performance of the appliance, some of which may result from incorrect operation, can be put right without contacting the Service Department. , Repair work to electrical appliances should only be carried out by a suitably qualified person in strict accordance with current local and national s ...

  • Miele T 4819 Ci L - page 30

    Problem Possible cause Remedy The Clean out airways indicator light comes on. This indicator light comes on to warn you that the dryer is not working efficiently. Possible cause: the fluff filters are clogged with fluff or with detergent residues. – Cleaning the fluff filters is usually all that is required. However, if the Clean out airways indi ...

  • Miele T 4819 Ci L - page 31

    Problem Possible cause Remedy The Start/Stop button is flashing slowly and the display is dark. The dryer is in Standby mode. This is quite normal and not indicative of any fault. See "Programmable functions". Sometimes a programme cannot be started and the corresponding programme indicator light does not light up. No obvious cause. – S ...

  • Miele T 4819 Ci L - page 32

    An unsatisfactory drying result Problem Possible cause Remedy The laundry is not sufficiently dry. The load consisted of different fabrics. – Finish drying using the Warm air programme. – Select a different programme next time *. Items made of synthetic fibres are charged with static electricity after drying. Synthetic fibres tend to attract st ...

  • Miele T 4819 Ci L - page 33

    Other problems Problem Possible cause Remedy The drying process goes on too long or even switches off. In some circumstances, the Clean out airways indicator light still comes on, even though the filters are clean. Please check all the possible causes and switch the dryer off and then back on again. Ventilation to and from the dryer may be insuffic ...

  • Miele T 4819 Ci L - page 34

    Problem Possible cause Remedy Water leaks from the dryer after the condenser unit has been cleaned. – The inner cover of the condenser unit has not been locked properly and/or the condenser unit has not been positioned correctly. – Fluff has collected in the condenser unit housing. – Ensure that the condenser unit is positioned correctly and ...

  • Miele T 4819 Ci L - page 35

    Changing the lamp Disconnect the tumble dryer from the mains electricity supply. ^ Open the door. You will find the interior lamp cover at the top of the drum aperture. ^ Insert a suitable tool, such as a wide bladed screwdriver, under the side edge of the lamp cover as illustrated. ^ Apply a little pressure and whilst doing so turn your wrist in t ...

  • Miele T 4819 Ci L - page 36

    Repairs In the event of any faults which you cannot remedy yourself, please contact – your Miele dealer or – the Miele Service Department (see back cover for contact details). When contacting your dealer or the Service Department, please quote the model and serial number of your appliance, both of which are shown on the data plate situated on t ...

  • Miele T 4819 Ci L - page 37

    Front view a Mains connection cable b Condensed water container c Control panel d Door (can be fitted with a decor panel) e Service panel for condenser unit f Four height adjustable screw feet g External drainage options (e.g. via wash basin, wash basin drain outlet or gully) (see "External condensed water outlet"). Installation 37 ...

  • Miele T 4819 Ci L - page 38

    Installation site , Make sure the dryer door can be opened without hindrance after installation. Building under a continous worktop / in a kitchen run This tumble dryer is specially designed for installation under a continuous worktop run in a fitted kitchen. N = Niche height (820-930 mm) When moving the dryer do not lift it by the drum door. The d ...

  • Miele T 4819 Ci L - page 39

    Levelling the appliance ^ Turn the 4 screw feet to adjust the dryer to the correct height and level. Longer screw feet are available as an optional accessory. Unscrew and remove the feet supplied with the appliance before fitting the longer screw feet. The cover plate on the dryer must be aligned horizontally underneath the worktop. , The ventilati ...

  • Miele T 4819 Ci L - page 40

    Matching the fascia panel to the height of adjacent drawer fronts The fascia panel can be aligned with the drawer fronts by adjusting the spacer bars. ^ Using a socket spanner, turn clockwise or anti-clockwise until the required height is reached. If necessary individual bars can be removed or more added. ^ To do this, use the socket spanner to loo ...

  • Miele T 4819 Ci L - page 41

    Fitting the front panel The appliance front can be fitted with a door panel to match other kitchen units. If fitted in a Miele kitchen, the door panel can be ordered pre-drilled with the necessary fixing holes. If fitted in a non-Miele kitchen, a suitable panel will have to be drilled to suit by a qualified kitchen fitter. See "Fitting a door ...

  • Miele T 4819 Ci L - page 42

    Fitting a door front panel made by another manufacturer Preparing the front panel A Measure distance X for drilling the hinge holes. – with spacer bars: – without spacer bars: (the front panel must be correspondingly higher) B Mark the two hinge holes and the four smaller holes as shown in the diagram. Depending on country, this tumble dryer is ...

  • Miele T 4819 Ci L - page 43

    For right hand hinging only: – front panel shown decor side face down, upper edge at the bottom: if width ( b ) increases, measurement a must also be increased b = 592 mm N a = 21.5 mm b = 593 mm N a = 22.0 mm b = 594 mm N a = 22.5 mm b = 595 mm N a = 23.0 mm b = 596 mm N a = 23.5 mm H = height of adjacent furniture unit doors. C Drill the two hi ...

  • Miele T 4819 Ci L - page 44

    Fitting a plinth facing The gap between the lower edge of the tumble dryer plinth and the floor can be closed up using a suitable kitchen furniture plinth facing. The tumble dryer plinth has a special groove in which a plinth facing can be fitted. Plinth facing dimensions Length : 592 - 596 mm Thickness :8m m Height ( H ): The plinth facing height ...

  • Miele T 4819 Ci L - page 45

    External condensed water outlet General notes When drying is in progress, condensed water is pumped into the condensed water container through the drain hose at the back of the dryer. The condensed water can also be drained off directly if the dryer is installed near a sink, drain outlet etc. so that the condensed water container does not have to b ...

  • Miele T 4819 Ci L - page 46

    External drainage via a sink or gully ^ See "Front view" illustration. , If you want to drain the water off into a sink you will need to secure the hose carefully, e.g. by tying it to a tap to make sure it cannot slip during use. Otherwise there is a risk of overflowing water which could cause damage. ^ Use the bow-shaped guide to prevent ...

  • Miele T 4819 Ci L - page 47

    1 Adapter 2 Nut 3 Hose clip 4 Extension hose (accessory) 5 Non-return valve (accessory) 6 Tumble dryer drain hose ^ Fit adapter 1 to the sink drain outlet using nut 2 . If this nut has a flat disc in it you should take the disc out first. ^ Attach the end of the extension hose 4 to adapter 1 . ^ Use a screwdriver to tighten hose clip 3 up close to ...

  • Miele T 4819 Ci L - page 48

    Electrical connection U.K. All electrical work should be carried out by a suitably qualified and competent person, in strict accordance with current national and local safety regulations (BS 7671 in the UK). Ensure power is not supplied to the appliance until after installation work has been carried out. The appliance is supplied with a mains cable ...

  • Miele T 4819 Ci L - page 49

    Load 1 Final spin speed in a domestic washing machine Residual moisture Energy Duration kg rpm % kWh min. Cottons Normal 2 6.0 1000 60 3.35 94 Cottons Normal 6.0 6.0 6.0 6.0 1200 1400 1600 1800 53 50 48 43 3.05 2.90 2.55 2.50 86 82 74 73 Cottons Normal + Low temperature 6.0 1000 60 3.60 120 Cottons Hand iron 2 6.0 1000 60 2.65 71 Cottons Hand iron ...

  • Miele T 4819 Ci L - page 50

    Height 820 mm Width 595 mm Depth 575 mm Suitable for stacking Yes Weight 54 kg Drum volume 100 litres Maximum capacity 6 kg dry weight Capacity of condensed water container approx. 3.5 litres Drain hose length 950 mm Maximum delivery head 1.5 m Maximum drain hose length 4 m Length of connection cable 2 m Voltage see data plate Connected load see da ...

  • Miele T 4819 Ci L - page 51

    Altering the residual moisture level in the Cottons programme The tumble dryer is designed to dry effectively using as little energy as possible. However, if you require the laundry to be drier or damper, you can reduce or increase the default residual moisture in the Cottons programme. Follow the steps ( A , B , C ...) to programme and store in me ...

  • Miele T 4819 Ci L - page 52

    Altering the residual moisture level in the Minimum iron programme The tumble dryer is designed to dry effectively using as little energy as possible. However, if you require the laundry to be drier or damper, you can reduce or increase the default residual moisture in the Minimum iron programme. Follow the steps ( A , B , C ...) to programme and s ...

  • Miele T 4819 Ci L - page 53

    Anti-crease Anti-crease helps prevent creasing, if laundry is not normally removed im - mediately after the end of a programme. The anti-crease function – is activated when the tumble dryer is delivered. You can shorten the duration of the anti-crease phase or deactivate it if wished. – is used in all programmes except Woollens handcare . – s ...

  • Miele T 4819 Ci L - page 54

    Altering the volume of the buzzer The buzzer has two volumes. Follow the steps ( A , B , C ...) to programme and store in memory. Before you begin, ensure that: – The tumble dryer is switched off. – The door is closed. A Press the Start/Stop button and keep it pressed in whilst carrying out steps B - C . B Switch the dryer on. Wait until the St ...

  • Miele T 4819 Ci L - page 55

    Altering the standard drying level in the Automatic plus programme The tumble dryer is designed to dry effectively using as little energy as possible. However, if you require the laundry to be drier or damper, you can reduce or increase the default residual moisture in the Automatic plus programme. Follow the steps ( A , B , C ...) to programme and ...

  • Miele T 4819 Ci L - page 56

    Extending the cooling down time The cooling down phase which takes place before the end of a programme can be extended by 5 or 10 minutes, if required. This makes the garments easier to handle. The cooling down time can only be extended for programmes with drying levels. Follow the steps ( A , B , C ...) to programme and store in memory. Before you ...

  • Miele T 4819 Ci L - page 57

    Standby To save energy, the display and the programme sequence/check lights go out after 10 minutes and the Start/Stop button starts flashing slowly. To come out of standby mode ^ Turn the programme selector or press a button. Neither will have any effect if a programme is running. On The standby function is activated and the display and programme ...

  • Miele T 4819 Ci L - page 58

    Before you begin, ensure that: – The tumble dryer is switched off. – The door is closed. A Press the Start/Stop button and keep it pressed in whilst carrying out steps B - C . B Switch the dryer on. Wait until the Start/Stop button lights up constantly ... C . . . and then release the Start/Stop button. D Press the Low temperature button six ti ...

  • Miele T 4819 Ci L - page 59

    Memory function The electronics will memorise any extra options selected for a programme. The duration selected for the Warm air or Cool air timed drying programmes will also be stored in memory. These settings will be selected automatically the next time the programme is chosen. You can either accept these or change them by pressing the appropriat ...

  • Miele T 4819 Ci L - page 60

    Clean out airways indicator Fluff should be removed after drying. The Clean out airways indicator will remind you to clean the filters when a certain amount of fluff has collected in the filters. You can decide at what level of fluff this reminder should be given. You will have an idea of how often this should be done after a few drying programmes. ...

  • Miele T 4819 Ci L - page 61

    Keypad tone An audible tone sounds each time a button is pressed. Follow the steps ( A , B , C ...) to programme and store in memory. Before you begin, ensure that: – The tumble dryer is switched off. – The door is closed. A Press the Start/Stop button and keep it pressed in whilst carrying out steps B - C . B Switch the dryer on. Wait until th ...

  • Miele T 4819 Ci L - page 62

    Adjusting the dryer's electronics for very soft water , In some areas of the UK, water is extremely soft which can affect the sensitivity of the control electronics. If the dryer is installed in an area of very soft water, you should contact your local water supplier for information and advice regarding water hardness and water conductivity. I ...

  • Miele T 4819 Ci L - page 63

    Extending the range of the drying levels You can extend the range of the drying levels for many of the programmes: Machine iron+ (drier than Machine iron). Slightly dry (drier than Hand iron). Normal+ (drier than Normal). This programmable function is only available for programmes with drying levels. Follow the steps ( A , B , C ...) to programme a ...

  • Miele T 4819 Ci L - page 64

    M.-Nr. 07 844 000 / 00 Alteration rights reserved/1010 ...

Manufacturer Miele Category Dryer

Documents that we receive from a manufacturer of a Miele T 4819 Ci L can be divided into several groups. They are, among others:
- Miele technical drawings
- T 4819 Ci L manuals
- Miele product data sheets
- information booklets
- or energy labels Miele T 4819 Ci L
All of them are important, but the most important information from the point of view of use of the device are in the user manual Miele T 4819 Ci L.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Miele T 4819 Ci L, service manual, brief instructions and user manuals Miele T 4819 Ci L. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Miele T 4819 Ci L.

A complete manual for the device Miele T 4819 Ci L, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Miele T 4819 Ci L by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Miele T 4819 Ci L.

A complete Miele manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Miele T 4819 Ci L - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Miele T 4819 Ci L, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Miele T 4819 Ci L, that we can find in the current document
3. Tips how to use the basic functions of the device Miele T 4819 Ci L - which should help us in our first steps of using Miele T 4819 Ci L
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Miele T 4819 Ci L
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Miele T 4819 Ci L in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Miele T 4819 Ci L?

Use the form below

If you did not solve your problem by using a manual Miele T 4819 Ci L, ask a question using the form below. If a user had a similar problem with Miele T 4819 Ci L it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)