Manual Campbell Hausfeld CC640

58 pages 3.1 mb
Download

Go to site of 58

Summary
  • Campbell Hausfeld CC640 - page 1

    CC640 Digital Camera Operating Manual Issued 9.1.08 Copyright © 2005 C ampbell Sci entific (Canada) C orp.. Printed under Licence by Cam pbell Scient ific Ltd. CSL 573 ...

  • Campbell Hausfeld CC640 - page 2

    ...

  • Campbell Hausfeld CC640 - page 3

    Guarantee This equipment is guaranteed against defects in materials and workmanship. This guarantee applies for twelve months from date of delivery. We will repair or replace products which prove to be defective during the guarantee period provided they are returned to us prepaid. The guarantee will not apply to: • Equipment which has been modifi ...

  • Campbell Hausfeld CC640 - page 4

    ...

  • Campbell Hausfeld CC640 - page 5

    Contents PDF viewers note: These page numbers refer to the printed version of this document. Use the Adobe Acrobat® bookmarks tab for links to specific sections. 1. Specifications .............................................................. 1 2. Introduction .................................................................. 2 2.1 Connecting .... ...

  • Campbell Hausfeld CC640 - page 6

    8. Lens ............................................................................ 21 8.1 Lenses and Field of View ....................................................................... 21 8.2 Focus and Zoom Adjustm ent .................................................................. 22 8.2.1 Temperat ure Variations and Focus ................. ...

  • Campbell Hausfeld CC640 - page 7

    Appendices A. Camera Enclosures ................................................ A-1 B. Quick Set-up and Test Procedure CC640 In Standalone Mode ................................................. B-1 Figures 1. CC640 Camera............................................................................................2 2. Terminal Block Position and Lay ...

  • Campbell Hausfeld CC640 - page 8

    ...

  • Campbell Hausfeld CC640 - page 9

    CC640 Digital Camera 1. Specifications Power Supply Operating: 9-15 VDC 250 mA Max Quiescent: 250 uA typical Operating Temperature -40 ° C to +70 ° C Ext. Input Signal Logic Low Level: 0 - 0.7 VDC (-12VDC Absolute Min) Logic High Level: 4 – 15 VDC (15VDC Absolute Max) RS-485 Max. BAUD Rate: 230.4 KBAUD RS-232 Max. BAUD Rate: 230.4 KBAUD CS I/O ...

  • Campbell Hausfeld CC640 - page 10

    CC640 Digital Camera 2. Introduction The CC640 di gital camera was designed t o meet the stringent ope rational requirements necessary fo r remote battery powered installations. The CC640 has a very low quiescent power draw and can ope rate over a wi de temperature range . The camera contains a com p act flash memo ry card interface th at turns the ...

  • Campbell Hausfeld CC640 - page 11

    Operating Manual Table 1. Recommended ca ble colour connections Colour Required Connections Recommended Signal Connection Black Mandatory Gr ound Red Mandatory +12 V Green Optional Ext White N/A No connection or Ground Yellow Optional RS-485 A or RS-232 TX (Camera Output) Blue Optional RS-485 B or RS-232 RX (Camera Inpu t) Clear/Shield Mandatory Ca ...

  • Campbell Hausfeld CC640 - page 12

    CC640 Digital Camera 2.3 Operating The CC640 is capable of ac quiring images in a self-tim ed mode, an ex ternal trigger m ode, and by manuall y taking a picture usi ng the Snap button (Se ction 3.3, page 6). Self-timed mode is set usin g the Device Configuration Utility, while a short pulse applied to the Ext. Input Sign al on the camera will init ...

  • Campbell Hausfeld CC640 - page 13

    Operating Manual 3. Camera Hardware description 3.1 Terminal Block Connections Only shielded cable should be used for connections to the termin al NOTE bloc k. Gnd Power Ground +12VDC 9 -15VDC Power, 250 mA Ext. Ex ternal Trigger Input, 5.0 Vo lt Logic Signal, 15Volts Max RS-485A R S-485 c ommunications RS-485B RS-485 communicatio ns Shield Th e sh ...

  • Campbell Hausfeld CC640 - page 14

    CC640 Digital Camera 3.2 Power Switch The power swi tch can be used to power th e camera continuously on or to place the camera in Auto powe r mode. The switch s hould not be le ft in the O n posit ion under normal operation. Leaving the switch in the On position will prevent the camera from entering its low power qui escen t mode of operation. The ...

  • Campbell Hausfeld CC640 - page 15

    Operating Manual connectors in addition to th e video input. The audio inpu ts should remain unconnected, as the camera does not have aud io capability. The video o u tput can be turned on and/or off by pressi ng the Set-up Button whe n the power switch is in the ON position. During every image acquisition sequence the video outpu t will be momenta ...

  • Campbell Hausfeld CC640 - page 16

    CC640 Digital Camera The following table offers LE D inform ation at a glance: LED Always O ff The camera has no power connected to it or it is in Quiescent Mode Quick Flash The camera is Powered ON (Power switch is in the ON position) Every 5 Seconds 4 Slow Flas hes Normal Power-On Seque nce Rapid Flashes for 4 Seconds A Power on t est did n o t p ...

  • Campbell Hausfeld CC640 - page 17

    Operating Manual repeatedly update its firmware every ti me the camera wake s up from its quiescent mode. 4. Communications 4.1 PakBus Communications The camera uses the PakBus prot ocol to send im ag e files fro m the camera to the datalogger or o ther PakB us com patible devices. Communi cations are not e nabled whi le the cam e ra is in its quie ...

  • Campbell Hausfeld CC640 - page 18

    CC640 Digital Camera Figure 4 Using C2006 ad apter board to carry RS-232 TX and RX on multi-conductor cable The necessary RS-232 TX (transmit) and RX (receive) signals ca n also be carried by the recom mended 6 co nductor cable. Figure 4 demonstrates using a DB -9 to terminal brea kout boar d (part C 2006) an d t he standard cable to transm it the ...

  • Campbell Hausfeld CC640 - page 19

    Operating Manual Figure 5 RS-232 wiring using C2 006 boards with mult i-conductor cable Depending on the datalogger the wires can be terminated directly on the control ports or an other C2006 adapter board can be used to p rovide a 9-pi n connect or at the datalogger end (see Figure 5). 11 ...

  • Campbell Hausfeld CC640 - page 20

    CC640 Digital Camera Figure 6 Connections for Configuration The RS-232 port is used in conjun ction with the Device Configuration so ftw are to change settings in the camera such as the PakBus ad dresses. Figure 6 illustrates the connections required for interfacing to a computer. 12 ...

  • Campbell Hausfeld CC640 - page 21

    Operating Manual Figure 7 Camera connections for CS I/O port op eration 4.3 CS I/O Port The CS I/O port on the cam era provides a connector for CS I/O com munications. The port is designed to communicate with Campbell Scientific datalogg ers equipped with CS I/O communicat ion ports . A ribbo n cable assem bly (C1947) is used to provide a male 9-pi ...

  • Campbell Hausfeld CC640 - page 22

    CC640 Digital Camera 4.4 RS-485 Port The RS-485 terminals can be used in conjunction with the MD485 to interface a datalogger to the camera over distances of up to 4000 feet. The +12V GND and EXT control lines cannot be pr actically run these long distances. Normally the RS-485A and RS-485B lines, and an ad ditio nal ground connection, are run thes ...

  • Campbell Hausfeld CC640 - page 23

    Operating Manual Figure 8 Device Configuration Utility Scree n 15 ...

  • Campbell Hausfeld CC640 - page 24

    CC640 Digital Camera Table 2. Explanation of Configuration Settin g s Parameter Type Description Default Value Version Read Only The firmware version of the CC640 ope rating system N/A PakBus Port Read/Write Options: NONE, CS I/O, RS-485, RS-232 NONE Only select a P akBus Port if comm unications are being used to transfer images via PakB us. PakBus ...

  • Campbell Hausfeld CC640 - page 25

    Operating Manual Video Output Type Read/Write Options: NTSC, PAL NTSC NTSC video is the North Am erican Standard. P AL is the VIDEO sta ndard for most Europea n Countries. Send Fixed Name Read/W rite Options: ON, OFF OFF If set to off, then the camera will send each image with a unique file name. The form at will be AAAA_EXXXXXX X.JPG Where AAAA is ...

  • Campbell Hausfeld CC640 - page 26

    CC640 Digital Camera 6. Operational Description 6.1 Self Timed Mode In self-timed mode the cam era is capabl e of waking itself up and acquiring an image. In order to place the camera in self-timed mode use the Device Configuration Software to set the Self-Timed Interval parameter to non-zero. Self-Timed Example 1: To take a pict ure every 15 minut ...

  • Campbell Hausfeld CC640 - page 27

    Operating Manual 7. Image Quality 7.1 Lighting conditions Lighting cond ition s have the greatest influence on image quality. The CC640 camera produces the best images under no rmal daylight conditions. Pictur es tak en in good daylight cond itio ns produce crisper and brigh ter images. The CC640 uses the e ntire image to adjust the exposu re setti ...

  • Campbell Hausfeld CC640 - page 28

    CC640 Digital Camera Figure 9 Illustration of Time Stamp banner 7.4 JPEG Compression There are 5 selectable levels of JPEG compression: • Very High (32 Kbytes Typical) • High (4 8 Kbytes Typical) • Medium (72 Kbytes Typical) • Low (100 Kbytes Typical) • None (Lossless) (480 Kbytes Typical) These are typical values with th e tim e stamp en ...

  • Campbell Hausfeld CC640 - page 29

    Operating Manual 8. Lens The standar d Lenses for the C C640 cam era contain the following features: • CS Mount • Varifocal (manual zoom) • Manual Focus • DC Iris The camera controls the iris of the lens using the cable with a 4-pin connector. This connector must always be plugged in to the receptacle (on the front lens plate of the camera) ...

  • Campbell Hausfeld CC640 - page 30

    CC640 Digital Camera 8.2 Focus and Zoom Adjustment The lens is e quipped with manual zoom and focus adjustm ent rings. T he most practical way to adjust the lens is by utilizing a normal Television monitor or a portable Te levision . • Connect an ap propriate vide o cable from the vide o output c onnector (RCA Jack) of the camera t o the video in ...

  • Campbell Hausfeld CC640 - page 31

    Operating Manual 8.3 Lens Filter The CC640 camera is equipped with an IR cut filter on its lens. This is threaded onto the front of the len s an d is required to filter out near-infrared light that can have an undesirable affect on the images. It is recommended that the filter always be left installed on the lens. Figure 10 Lens and Filter 9. Maint ...

  • Campbell Hausfeld CC640 - page 32

    CC640 Digital Camera 9.2 Lens Cleaning If the filter or lens requires cleaning, it is very important that only a proper lens cloth (like those included w ith your CC640 camera) or lens tissue be used. The use of inappr opriate ma terials to clean t he lens can permanently damage or reduce the effectiveness of the filter or lens. 10. Set-up and Inte ...

  • Campbell Hausfeld CC640 - page 33

    Operating Manual 10.2 Communications Communications can enable remote retrieval and/or storage of images to external devices such a s compatibl e Campbell Sci entific data loggers. T he PakBus protocol is used to facilitate the transfer of images. 10.2.1 Communications Disabled When a camera is not connected to oth er devices for communications the ...

  • Campbell Hausfeld CC640 - page 34

    CC640 Digital Camera Refer to Sectio n 4.2 for additional i nformation and connect ions diagrams usin g the RS-232 port. 10.2.4 RS-485 Communications The camera can download im ages via its RS -485 port using the PakB us protocol. An MD485 c an be use d to transm it images via PakBus fro m a camera to other devices: • Set the parameter PakBus Por ...

  • Campbell Hausfeld CC640 - page 35

    Operating Manual The quiescent power consumption in Amp-Hours is calculated as follows: P quiescent = 250x10 -6 Amps * 24 Hou rs = 0.006 Amp-H rs / Day The operating power usage per picture in Am p - Hours is calculated as follows: P operating = 0.250 Am ps * (30Sec. / 36 00 Sec./Hr) = 0. 00208 Am p-Hrs / Pict ure The daily power usage will depend ...

  • Campbell Hausfeld CC640 - page 36

    CC640 Digital Camera Table 4. RS-232 Port File Trans fer Times and power usage per image RS-232 n E ) on (42kB Files) n ) (100kb Files) es) Very High High Medium Low Compression None Comm unica BAUD RAT t io Compress (32kB Files ion Compressi Compressi (72kB Files o Lossless Compression (480kB Fil 9600 47 seconds 71 seconds 105 seconds 147 seconds ...

  • Campbell Hausfeld CC640 - page 37

    Operating Manual 12. CR10X the CS e. ents 12.2 CR10X Memory Allocation Memory must be allocated in the CR10X for th e purpose of storing files. The mem y u ltiples of 64Kbyte blocks. Memory allocated for file storage comes out of final storage space. T h e files are stored in a circular buffer (rin e l storag m The mem ommend 6 t o 16 blocks) block ...

  • Campbell Hausfeld CC640 - page 38

    CC640 Digital Camera 12.4 CR10X *D15 Settings The *D15 Settings are used to set the PakBus Parameters necessary for communicat ions with t he camera. Refer to PakBus Networking Guide for additional information on PakBus and th ese setting s . If values for parameters 01, 02, 03 are t oo smal l, you may not be able t o connect to all network nodes. ...

  • Campbell Hausfeld CC640 - page 39

    Operating Manual The following methods can b e used to set the d rive size of the USR: • The Device Configuration Utility program • PakBus Graph • Editing the parameter from the Status Table • The CR1000’s optional keypad a nd display. 13.2 CR1000 Files Manager The Files Manager setting on the CR1000 facilitates the management of JPEG fil ...

  • Campbell Hausfeld CC640 - page 40

    CC640 Digital Camera Refer to Figure 7 Camera connections for CS I/O port (page 13) for an illustration of the connections betwee n the camera and the CR1000 datalogger. 13.4 CR1000 RS-232 Port Communications The camera can be connected to the 9 pi n RS-232 port of the CR1000. A Nu ll modem cable or adapter must be used betw een the camera and the ...

  • Campbell Hausfeld CC640 - page 41

    Operating Manual • Send_File <Station> <Filename> Sends a particular file to a station. • Delete_File <Station> <Filename> Deletes a file stored in the datalogger. Th is is currently not supported on the CR10X dat alogger. • Retrieve_File < Station > < Filena me > <Output Filename > This should be the ...

  • Campbell Hausfeld CC640 - page 42

    CC640 Digital Camera 14.3 Task Set-up / LNCMD.EXE Automated image collection can be ach ieved by setting up a Task in Logg ern et that executes the LNCMD.EXE executable. A sample screen of a Tas k set-up that executes LNCM D.EXE is shown in Figure 11 Task Set-up (below). In this example th e statio n CR10XPB is a station that is set-up in Loggern e ...

  • Campbell Hausfeld CC640 - page 43

    Operating Manual Figure 11 Task Set-up 35 ...

  • Campbell Hausfeld CC640 - page 44

    CC640 Digital Camera In the above example the task will execute on its own schedule separate from data collection. A task can also be created t hat calls the LNCMD.EXE after scheduled data is collected. This may be m ore desirable for stations that are called using a dial up connect ion to elim inate separate dialling f o r data and images. To set- ...

  • Campbell Hausfeld CC640 - page 45

    Operating Manual 15. Installation The camera must be installed in an e nvir onmentally sealed enclosure tha t offers protection from moisture or high humidity. It is als o recommended that desiccant be installed in the camera enclosure t o abso rb excess humidity. Failure to install or replace the desiccant as required m ay cause malfunctions or da ...

  • Campbell Hausfeld CC640 - page 46

    ...

  • Campbell Hausfeld CC640 - page 47

    Appendix A. Camera Enclosures 1. ENC 16/18-CC The ENC16/18-CC encl osure provides a me ans of housing the camera along with other equi pment such as a datalog ger and modem . The ENC 16/18-CC e nclosure uses the same fibre glass enclosure and mounts as the standard ENC 16/18 enclosure. The ENC 16/18-CC includes the following additional items to fac ...

  • Campbell Hausfeld CC640 - page 48

    CC640 Digital Camera Figure A-1a Enc 16/18 Mounting A-2 ...

  • Campbell Hausfeld CC640 - page 49

    Appendix A. Camera Enclosu res 2. CC4718 Enclosure The CC4718 E nclosure is a n outdoor enclosure t hat can be use d to house the CC640 camera. The FIN6CON D cable would normally be us ed to carry power from the s upply to the camera. This cable also s upplies enoug h conductors t o use RS-485 or RS-2 32 communicat ions to send images t o a datalog ...

  • Campbell Hausfeld CC640 - page 50

    CC640 Digital Camera Figure A-3 Camera on CC4718 Mounting Plate Figure A-4 CC4718 Bottom View A-4 ...

  • Campbell Hausfeld CC640 - page 51

    Appendix A. Camera Enclosu res Figure A-5 Vertical Pipe Mount Figure A-6 Horizontal Pipe Mount A-5 ...

  • Campbell Hausfeld CC640 - page 52

    ...

  • Campbell Hausfeld CC640 - page 53

    Appendix B. Quick Set-up and Test Procedure CC640 in Standalone Mode PURPOSE: The steps below are designed to he lp first time users operate the CC640 camera. The procedures are useful to do a quick check on the cam era’s operation and familiarize the user with focusing. These procedures are intended for use only as an initial check of the CC640? ...

  • Campbell Hausfeld CC640 - page 54

    CC640 Digital Camera STEP 2: Using the screwdriver and cable t hat is provided with the camera, connect a 12VDC power s ource t o the CC640 using the di agram below: R S 2 3 2 v ia c o n tr o l p o r ts A u to O n S e tu p S n a p P o w e r C S I/O R S - 2 3 2 E x te r n a l I / O V id e o - O u t S h ie ld A B Ext . +12V D C Gnd CC640 Compact Fl a ...

  • Campbell Hausfeld CC640 - page 55

    Appendix B. Quick Set-up and Test Procedure STEP 9: Press the ‘Setu p’ button agai n and observe that the video out put turns off. Pressing the setu p butt o n t og gl es t he vi de o output on and off. Ensure that the video out put is off for the nex t step. STEP 10: Press the ‘Snap’ button. The LED will flash twice and the video output wi ...

  • Campbell Hausfeld CC640 - page 56

    ...

  • Campbell Hausfeld CC640 - page 57

    ...

  • Campbell Hausfeld CC640 - page 58

    CAMPBELL SCIENTIFIC COMPANIES Campbell Scientific, Inc. (CSI) 815 West 1800 North Logan, Utah 84321 UNITED STATES www.campbellsci.com info@campbellsci.com Campbell Scientific Africa Pty. Ltd. (CSAf) PO Box 2450 Somerset West 7129 SOUTH AFRICA www.csafrica.co.za sales@csafrica.co.za Campbell Scientific Australia Pty. Ltd. (CSA) PO Box 444 Thuringowa ...

Manufacturer Campbell Hausfeld Category Digital Camera

Documents that we receive from a manufacturer of a Campbell Hausfeld CC640 can be divided into several groups. They are, among others:
- Campbell Hausfeld technical drawings
- CC640 manuals
- Campbell Hausfeld product data sheets
- information booklets
- or energy labels Campbell Hausfeld CC640
All of them are important, but the most important information from the point of view of use of the device are in the user manual Campbell Hausfeld CC640.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Campbell Hausfeld CC640, service manual, brief instructions and user manuals Campbell Hausfeld CC640. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Campbell Hausfeld CC640.

A complete manual for the device Campbell Hausfeld CC640, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Campbell Hausfeld CC640 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Campbell Hausfeld CC640.

A complete Campbell Hausfeld manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Campbell Hausfeld CC640 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Campbell Hausfeld CC640, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Campbell Hausfeld CC640, that we can find in the current document
3. Tips how to use the basic functions of the device Campbell Hausfeld CC640 - which should help us in our first steps of using Campbell Hausfeld CC640
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Campbell Hausfeld CC640
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Campbell Hausfeld CC640 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Campbell Hausfeld CC640?

Use the form below

If you did not solve your problem by using a manual Campbell Hausfeld CC640, ask a question using the form below. If a user had a similar problem with Campbell Hausfeld CC640 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)