Manual Tektronix CPS250

34 pages 0.18 mb
Download

Go to site of 34

Summary
  • Tektronix CPS250 - page 1

    User Manual CPS250 T riple Output Power Supply 070-6740-03 ...

  • Tektronix CPS250 - page 2

    Copyright  T ektronix, Inc. 1987. All rights reserved. T ektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication supercedes that in all previously published material. Specifications and price change privileges reserved. Printed in the U.S.A. T ektronix, Inc., P .O. Box 1000, W ilsonville, OR ...

  • Tektronix CPS250 - page 3

    W ARRANTY T ektronix warrants that this product will be free from defects in materials and workmanship for a period of one (1) year from the date of shipment. If any such product proves defective during this warranty period, T ektronix, at its option, either will repair the defective product without charge for parts and labor , or will provide a re ...

  • Tektronix CPS250 - page 4

    ...

  • Tektronix CPS250 - page 5

    CPS250 User Manual i T able of Contents General Safety Summary iii . . . . . . . . . . . . . . . . . . . . . . . . . . . . Getting Started 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparing the Power Supply for Use 2 . . . . . . . . . . . . . . . . . . . . . Front Panel 4 . . . . . . . . . . . . . . . . . . . . . ...

  • Tektronix CPS250 - page 6

    T able of Contents ii CPS250 User Manual List of Figures Figure 1: Line V oltage Selectors, Power Input, and Fuse Locations 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Figure 2: Front Panel 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Figure 3: Independent Floating Application 8 . . . . . . . . . . ...

  • Tektronix CPS250 - page 7

    CPS250 User Manual iii General Safety Summary Review the following safety precautions to avoid injury and prevent damage to this product or any products connected to it. Only qualified personnel should perform service pr ocedur es. Injury Precautions Use Proper Power Cord T o avoid fire hazard, use only the power cord specified for this product. A ...

  • Tektronix CPS250 - page 8

    General Safety Summary iv CPS250 User Manual Do Not Operate in Wet/Damp Conditions T o avoid electric shock, do not operate this product in wet or damp conditions. Do Not Operate in Explosive Atmosphere T o avoid injury or fire hazard, do not operate this product in an explosive atmosphere. Product Damage Precautions Use Proper Power Source Do not ...

  • Tektronix CPS250 - page 9

    General Safety Summary CPS250 User Manual v Safety T erms and Symbols T erms in This Manual These terms may appear in this manual: W ARNING. W arning statements identify conditions or practices that could r esult in injury or loss of life. CAUTION. Caution statements identify conditions or practices that could r esult in damage to this pr oduct or ...

  • Tektronix CPS250 - page 10

    General Safety Summary vi CPS250 User Manual Certifications and Compliances CSA Certified Power Cords CSA Certification includes the products and power cords appropriate for use in the North America power network. All other power cords supplied are approved for the country of use. ...

  • Tektronix CPS250 - page 11

    CPS250 User Manual 1 Getting Started The T ektronix CPS250 Triple Output Power Supply is a multifunc- tion bench or portable instrument. The fixed 5 volt output is available for use in transistor-transistor -logic (TTL) applications. T wo 0 V to 20 volt, 500 mA, variable outputs meet the needs of most semiconductor test or experimental applications ...

  • Tektronix CPS250 - page 12

    Getting Started 2 CPS250 User Manual Preparing the Power Supply for Use Check the following items prior to operating the CPS250 T riple Output Power Supply for the first time (see Figure 1 for locations of items 1 through 3): 1 2 3 Figure 1: Line V oltage Selectors, Power Input, and Fuse Locations CAUTION. T o pr event damage to the instrument, set ...

  • Tektronix CPS250 - page 13

    Getting Started CPS250 User Manual 3 2. Check that the correct line fuse is installed. The line fuse provides protection if the equipment malfunctions or an overload occurs. Refer to Appendix C: Replaceable Parts on page 23 for fuse part numbers. W ARNING. T o pr event electrical shock, connect the power cor d to a pr operly gr ounded power sour ce ...

  • Tektronix CPS250 - page 14

    Getting Started 4 CPS250 User Manual Front Panel Figure 2 shows the front-panel controls, connectors, and indicators with brief descriptions of the items following the figure. 34 5 46 7 8 9 10 11 12 13 14 15 1 2 Figure 2: Front Panel 1. POWER Button. Push top of switch to the ON position to turn power supply on. Push bottom of switch to the OFF pos ...

  • Tektronix CPS250 - page 15

    Getting Started CPS250 User Manual 5 6. Milliampere Current Meter . This meter indicates the current level of A or B output, depending on the position of the A/B meter switch. The meter may be mechanically set for zero with the slotted mechanical zero adjust disk below the center of the meter . 7. A/B Output Switch. Switches A and B outputs from IN ...

  • Tektronix CPS250 - page 16

    Getting Started 6 CPS250 User Manual ...

  • Tektronix CPS250 - page 17

    CPS250 User Manual 7 Reference This section of the manual includes examples of how to use the CPS250 T riple Output Power Supply . The number of possible applications is extensive, so only a few examples are given. CAUTION. Heat buildup may occur on the r ear-panel heat sink during operation. T o pr event equipment damage, ensur e that the power su ...

  • Tektronix CPS250 - page 18

    Reference 8 CPS250 User Manual T o configure the power supply for independent floating, do the following: 1. W ith the CPS250 T riple Output Power Supply on and the outputs disconnected from loads, set the A and B VOL T AGE controls to the values needed (read on the V meter). Set the A and B CURRENT controls to midrange. 2. T urn POWER to OFF , and ...

  • Tektronix CPS250 - page 19

    Reference CPS250 User Manual 9 CAUTION. T o pr event electric shock, do not elevate any power supply output terminals with any external voltage sour ce or power supply . T able 1: Independent Ground-Referenced V oltage Combinations 5-V olt Supply A-Supply B-Supply +5 V , fixed 0 to +20 V 0 to +20 V +5 V , fixed 0 to +20 V 0 to –20 V +5 V , fixed ...

  • Tektronix CPS250 - page 20

    Reference 10 CPS250 User Manual Load 1 –5 V 2 A Load 2 –5 to +15 V Zero to 0.5 A Load 3 –5 to +15 V Zero to 0.5 A Figure 4: Independent Ground-Referenced Applications (A) Figure 5 shows the power supply connected to produce separate outputs of +5 V , 0 V to +20 V from the B supply , and 0 V to –20 V from the A supply . In this configuration ...

  • Tektronix CPS250 - page 21

    Reference CPS250 User Manual 11 2. Set the A and B VOL T AGE controls to MIN and the A and B CURRENT controls to midrange. 3. T urn POWER to ON , and set the desired A and B voltages. 4. T urn POWER to OFF , and connect the load(s). 5. T urn POWER to ON , and readjust voltages if necessary . Figure 6 shows the power supply connected in series to pr ...

  • Tektronix CPS250 - page 22

    Reference 12 CPS250 User Manual 5. T urn POWER to ON , and readjust voltages if necessary . Zero to –40 V and fixed +5 V outputs are shown in Figure 7. Follow the procedures outlined above to operate this configuration. Load 1 +5 V Load 2 Zero to –40 V Figure 7: Connections to Provide Fixed +5 V and 0 to –40 V Figure 8 shows the configuration ...

  • Tektronix CPS250 - page 23

    Reference CPS250 User Manual 13 Figure 9 shows the connections for three ground referenced, positive supplies. Load 1 +5 V Load 2 Zero to +20 V Load 3 Zero to +20 V Figure 9: Independent Ground-Referenced Applications (positive output) T racking Mode Applications Series T racking When the A/B OUTPUTS selector is set to SERIES TRACKING, the –outpu ...

  • Tektronix CPS250 - page 24

    Reference 14 CPS250 User Manual Load 1 Zero to +40 V Load 1 Zero to –40 V Internal connection Internal connection Figure 10: Series-T racking Applications Parallel T racking When the A/B OUTPUTS selector is set to P ARALLEL TRACK- ING, the + outputs of the A and B variable supplies are connected and the – outputs of the A and B variable supplie ...

  • Tektronix CPS250 - page 25

    Reference CPS250 User Manual 15 Load 1 Zero to +20 V 1.0 A Load 1 Zero to –20 V 1.0 A Internal connections Internal connections Figure 1 1: Parallel-T racking Applications ...

  • Tektronix CPS250 - page 26

    Reference 16 CPS250 User Manual ...

  • Tektronix CPS250 - page 27

    CPS250 User Manual 17 Appendix A: Specifications The following tables list the physical, environmental, operational, and electrical characteristics of the CPS250 T riple Output Power Supply: T able 2: Certifications and Compliances EC Declaration of Conformity – EMC Meets intent of Directive 89/336/EEC for Electromagnetic Compatibility . Complian ...

  • Tektronix CPS250 - page 28

    Appendix A: Specifications 18 CPS250 User Manual T able 4: Environmental Characteristics Storage T emperature –10 _ C to 60 _ C, 80% RH Operating T emperature 10 _ C to 40 _ C, 75% RH T able 5: Operational Characteristics Outputs 0 to 20 VDC (two), 5 VDC V oltage (5 V) 5.0 ± 0.1 VDC at 2.0 A maximum V oltage (0–20 V) 0–20 VDC at 0.5 A maximu ...

  • Tektronix CPS250 - page 29

    CPS250 User Manual 19 Appendix B: Maintenance This appendix provides information for the basic maintenance of the CPS250 T riple Output Power Supply . Cleaning T o clean the power supply , use a soft cloth dampened in a solution of mild detergent and water . Do not spray cleaner directly onto the instrument, since it may leak into the cabinet and c ...

  • Tektronix CPS250 - page 30

    Appendix B: Maintenance 20 CPS250 User Manual T roubleshooting Electronic maintenance on the CPS250 T riple Output Power Supply must be performed by a trained technician. However , an operator can perform some basic and routine maintenance. The power supply will give some indications of problems to aid the operator . Power Switch is On but Power-On ...

  • Tektronix CPS250 - page 31

    Appendix B: Maintenance CPS250 User Manual 21 POWER Light ON, but No Output from A or B Supplies with Power Supply connected to Circuit 1. Disconnect the CPS250 outputs from the circuit being tested. Check A and B V OL T AGE and CURRENT controls. 2. If the outputs are good, check the circuit under test for a short or low resistance. POWER Light ON, ...

  • Tektronix CPS250 - page 32

    Appendix B: Maintenance 22 CPS250 User Manual ...

  • Tektronix CPS250 - page 33

    CPS250 User Manual 23 Appendix C: Replaceable Parts Replaceable parts may be ordered directly from your authorized T ektronix dealer . Standard Accessories The following items are shipped with the CPS250 T riple Output Power Supply: T able 7: Standard Accessories Accessory T ektronix Part Number Fuse, 3AG, 2A, 250V , SB (90 – 132 V Operation) 159 ...

  • Tektronix CPS250 - page 34

    Appendix C: Replaceable Parts 24 CPS250 User Manual The following power cords are available. T able 9: Accessory Power Cords Plug Configuration Normal Usage T ektronix Part Number North America 1 15 V 161-0104-00 Europe 230 V 161-0104-06 United Kingdom 230 V 161-0104-07 Australia 230 V 161-0104-05 North America 230 V 161-0104-08 Switzerland 230 V 1 ...

Manufacturer Tektronix Category Video Gaming Accessories

Documents that we receive from a manufacturer of a Tektronix CPS250 can be divided into several groups. They are, among others:
- Tektronix technical drawings
- CPS250 manuals
- Tektronix product data sheets
- information booklets
- or energy labels Tektronix CPS250
All of them are important, but the most important information from the point of view of use of the device are in the user manual Tektronix CPS250.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Tektronix CPS250, service manual, brief instructions and user manuals Tektronix CPS250. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Tektronix CPS250.

Similar manuals

A complete manual for the device Tektronix CPS250, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Tektronix CPS250 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Tektronix CPS250.

A complete Tektronix manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Tektronix CPS250 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Tektronix CPS250, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Tektronix CPS250, that we can find in the current document
3. Tips how to use the basic functions of the device Tektronix CPS250 - which should help us in our first steps of using Tektronix CPS250
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Tektronix CPS250
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Tektronix CPS250 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Tektronix CPS250?

Use the form below

If you did not solve your problem by using a manual Tektronix CPS250, ask a question using the form below. If a user had a similar problem with Tektronix CPS250 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)