English dropdown-ico

Manual Cisco OL-10426-01

150 pages 8.61 mb
Download

Go to site of 150

Summary
  • Cisco OL-10426-01 - page 1

    Corporate He adquarters Cisc o Syst ems , Inc . 170 West Ta sman Drive San Jos e, CA 95 134-1706 USA http://www.ci sco.com Tel: 408 526-4000 800 553- NETS (638 7) Fax: 408 526-4100 Cisco W AN Modeling T ools User Guide Release 15.3.0 0 May 2 0 06 Custom er Or der Numb er: Text Pa rt Numbe r: OL -10426-0 1 ...

  • Cisco OL-10426-01 - page 2

    THE SPECIFICATIONS AND INFORMATION REGARDING TH E PRODUCTS IN THIS MANUAL ARE SUBJE CT TO CHANGE WITHOUT NO TICE. ALL STATEMENT S, INFORMATI ON, AND RECOMMENDA TIONS IN T HIS MANUAL ARE BELIEVED TO BE ACCURATE BU T ARE PRESEN TED WITHOUT WARRANTY OF ANY KIND, EXPRE SS OR IMPLIED. USERS MUST TA KE FULL RESPONSIBILITY FOR THEIR AP PLICATION OF ANY PR ...

  • Cisco OL-10426-01 - page 3

    iii Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 CONTENTS Preface ix Relate d CWM and Switc h Documentat ion ix Obtain ing Documentati on x Cisco. com xi Document ation D VD xi Orderi ng Documenta t ion xi Document ation Feedba ck xi Cisco Pr oduct Securit y Overview xii Report i ng Securi ty Probl ems in Cisc o Product s xii Obtain ing Te ...

  • Cisco OL-10426-01 - page 4

    Cont ents iv Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 Instal ling th e SSI on a PC Pla t form 2-8 Removing Sub-applic ations 2-9 Troubl eshooti ng NMT I nstall ation 2-9 CHAPTER 3 Using t he NMT 3-1 NMT Startu p 3-1 NMT Menu Bar 3-2 File Me nu 3-3 Config ure Menu 3-4 Execut e M enu 3-7 Displa y Menu 3-7 Repo rt Menu 3-8 Mainten ance Me ...

  • Cisco OL-10426-01 - page 5

    Content s v Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 Card T able 4-27 Groups an d Network Table 4-2 8 Node s Tab le 4-2 9 Network Se ttings 4-29 Model Options 4-31 Feeder s 4-32 Mode ling Impl icit Fee ders 4-32 Mode ling Expl ici t Feed ers 4-34 Obsolet e Product s 4-35 Networks with Access Feeder s or Access Concentrator s 4-36 FastP ...

  • Cisco OL-10426-01 - page 6

    Cont ents vi Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 View Summary 6-5 Using th e M ap Tool 6-5 CHAPTER 7 NMT Utilit ies Command Line 7-1 CHAPTER 8 NMT Map 8-1 NMT Map Startu p 8-1 Navigat ing Thoug h a Network View 8-3 Obtain ing Link Infor m ation - Physica l Links 8-5 Obtai ning Link Info rmat ion - Lo gical Link s 8-5 Zooming the M ...

  • Cisco OL-10426-01 - page 7

    Content s vii Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 Convert ing WANDL Fil es into NMT .c nf Files 10-4 CHAPTER 11 SpreadSheet Interface 11-1 NMT to Micros oft Excel 11-1 Micro sof t Excel to NMT 11-4 Usage R eview 11-5 SSI Trou bleShootin g 11-6 CHAPTER 12 Cisco Net work De signer I mporter 12-1 CND PC Impor t Utili ties 12-1 Instal ...

  • Cisco OL-10426-01 - page 8

    Cont ents viii Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 ...

  • Cisco OL-10426-01 - page 9

    ix Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 Preface The Cisco W AN Model ing T ools User Guide pro v ides instructio ns for using the W A N Modeling T ools, a design aid for W ANs. Th e W AN Model ing T ool s consist of the following software tools: • Network Modeling T oo l (NM T). U NIX a nd PC versions are av a ilab le. • Map T ...

  • Cisco OL-10426-01 - page 10

    x Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 Preface Obtaining D ocument ation • Releas e Notes for CWM Automate d Bulk Pr ovisioni ng, Releas e 15.3.00 • Cisco W AN Manager Automated Bulk P r ovisi oning Gui de, Re lease 15. 3.00 The CWM Mo deling T ool s and Autom ated Bulk Provisi oning use r guides ar e also av ailab le on their ...

  • Cisco OL-10426-01 - page 11

    xi Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 Pre face Documentati on Feedba ck Cisco.com Y ou can acce ss the most curr ent Cisco documenta tion at this URL: http://www .cisco.co m/uni ve rcd/home/home. htm Y ou can access the Cis co websi te at th is URL: http://www .cisco.co m Y o u can acce ss international Cisco w ebsites at th is U ...

  • Cisco OL-10426-01 - page 12

    xii Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 Preface Cisco Product Security Ov erview Y ou can subm it comm ent s by using the respon se card (i f prese nt) behi nd the front cover of your documen t or by writi ng to the following a ddres s: Cisco Systems Attn: Custo mer Docu ment Or dering 170 W est T asman Dr i ve San Jose, CA 95134- ...

  • Cisco OL-10426-01 - page 13

    xiii Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 Pre face Obtaining Technical Assistance Obtaining Tech nical Assistance For all customers, par tners, resellers, a nd distributors who hold valid Cisco serv ice contracts, Cisco T echnical Support provides 2 4-hour-a-d ay , award-wi nning t echnic al assist ance. The C isco T echn ical Supp ...

  • Cisco OL-10426-01 - page 14

    xiv Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 Preface Obtaining A dditional Pub lications and Informa tion Definitions of Servic e Re quest Sev erity T o ensure th at all service re quests are repo rted in a stan dard for mat, Cis co has establish ed se verity def init ions . Se verity 1 (S1)—Y our ne twork is “down,” or ther e is ...

  • Cisco OL-10426-01 - page 15

    xv Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 Pre face Obtaining Additional Publications and Information • W orl d-class n etworking training is a vailable fr om Cisco. Y ou can view curren t offerings at this URL: http://www .cisco.com /en/US/lear ning/index .html ...

  • Cisco OL-10426-01 - page 16

    xvi Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 Preface Obtaining A dditional Pub lications and Informa tion ...

  • Cisco OL-10426-01 - page 17

    C HA PTER 1-1 Cisco WAN Mod e ling To ols Guide OL-10426-01, Rev. A0 1 Overview of the WAN Modeling Tools This ch apte r provides an overview of the a pplicat ions th at make up the Ci sco W AN M odeli ng T ools, an d of the Ci sco pr oducts th ey suppor t. Cisco WAN Modeling Tool s Overview Cisco W AN Modeling T ools includes the follow ing tools: ...

  • Cisco OL-10426-01 - page 18

    1-2 Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 Chapt er 1 Overview of th e WAN Model ing Tool s Functionali ty of the NMT Figure 1-1 sh o ws the relationshi p between the applicatio ns that make up the Cisco W AN Modeling T ools. Figur e 1 -1 Relationshi p betw een the Cis co W AN Modeling T ools Functionality of the NMT The NMT is a me ...

  • Cisco OL-10426-01 - page 19

    1-3 Cisco WAN Mod e ling To ols Guide OL-10426-01, Rev. A0 Chapter 1 Overview of the WAN Mode ling Tools Cisco Prod ucts Supported by the NMT Cisco Products Supporte d by the NMT Ne w f unctionality is added in each release o f the NMT to accuratel y reflect the curr ent capabili ties of the fo llowing Cisco equipm ent: • MGX 885 0, M GX 883 0, a ...

  • Cisco OL-10426-01 - page 20

    1-4 Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 Chapt er 1 Overview of th e WAN Model ing Tool s Basic Usage /Charter F unctional ity • IGX switch —A multi-service A TM networking switch that pro vides interfaces to support leg acy and emerging br oadband a pplicat ions. It supports A TM te chnology ov er subra te, nar rowband E1 and ...

  • Cisco OL-10426-01 - page 21

    1-5 Cisco WAN Mod e ling To ols Guide OL-10426-01, Rev. A0 Chapter 1 Overview of the WAN Mode ling Tools Gaps • The N MT extra cts the networ k topol ogy and conne ction p aram eters from Ci sco W A N Man ager . The NMT ha ndles changes in the C WM DB schema , so these chan ges are i n visible to th e user . CWM code d values are tra nslat ed to ...

  • Cisco OL-10426-01 - page 22

    1-6 Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 Chapt er 1 Overview of th e WAN Model ing Tool s Data Translat ion Tools Data Translati on Tools The N MT Da ta Translation T oo ls use data exc hanged betwe en th e NMT and other network d esign softw are aides t o create a complex ne twork m odel. These tools allo w the NM T to inter face ...

  • Cisco OL-10426-01 - page 23

    C HA PTER 2-1 Cisco WAN Mod e ling To ols Guide OL-10426-01, Rev. A0 2 Installing the Cisco WAN Modeling Tools This chapte r provides instr uctions for installing the follow in g Cisco W AN Modeling T ools: • the Network M odelin g T ool (N MT) • the Conf iguration Extraction T ool (CET) • the Thi rd-P arty Int erf ace (TPI) Con ve rsion Plug ...

  • Cisco OL-10426-01 - page 24

    2-2 Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 Chapter 2 In stalling the Cisco WAN Modeling Tools Inst allin g the NM T Installing the NMT This se ction expl ains how to i nstall t he Cisco W AN Mod eling T ool s software and l ink it t o your projec t direct ories. This proce dure also installs an y subapplicatio ns (CET , TPI, and SSI) ...

  • Cisco OL-10426-01 - page 25

    2-3 Cisco WAN Mod e ling To ols Guide OL-10426-01, Rev. A0 Chapter 2 Ins talling the Cisco WA N Modeling Tools Installing the NMT Step 4 If you are i nstalli ng from a cd on a Sol aris platfo rm, per form th e following steps: a. Enter the follo wing command: vol ch e ck b. Enter the follo wing command: Note cp /cdro m/nm t151/in stall /151.tar .Z ...

  • Cisco OL-10426-01 - page 26

    2-4 Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 Chapter 2 In stalling the Cisco WAN Modeling Tools Inst allin g the NM T The NMT files are li nked or copie d to t he projec t_name dire ctory . This links N MT an d al l the plug-ins (incl uding T PI, SSI, and CE T). T o link in NMT witho ut the p lug- ins, en ter the foll owing comm and: $ ...

  • Cisco OL-10426-01 - page 27

    2-5 Cisco WAN Mod e ling To ols Guide OL-10426-01, Rev. A0 Chapter 2 Ins talling the Cisco WA N Modeling Tools Installing the NMT Installing the NMT on a PC Platform T o install NMT on the PC, follo w these steps: Step 1 Run the prov ided nmt installing ex e file, which is a self e xtractin g ZIP file. The f ile is called ‘nmt_inst .exe’ and is ...

  • Cisco OL-10426-01 - page 28

    2-6 Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 Chapter 2 In stalling the Cisco WAN Modeling Tools Upgrad ing the NMT Sof tware Upgrading th e NMT Software NMT fe ature r eleases have unique sub dire ctory na mes. T he insta llation of a new featur e release requir es the creatio n or alteration of the wo rking direct ories. Maintena nce ...

  • Cisco OL-10426-01 - page 29

    2-7 Cisco WAN Mod e ling To ols Guide OL-10426-01, Rev. A0 Chapter 2 Ins talling the Cisco WA N Modeling Tools Removin g NMT Step 3 Ente r t he cd com mand to move to one of yo ur pr oject d irect ories: cd project_name Step 4 Ente r t he nmt command to start NMT : nmt Note Use th e nmt -d comma nd to st art the p rogra m if you need to modi fy sys ...

  • Cisco OL-10426-01 - page 30

    2-8 Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 Chapter 2 In stalling the Cisco WAN Modeling Tools Installing a Cisco WA N Modeling Tools Su b-applica tion Installing the Cisco WAN Modeling Tools sub-applications on a UNIX Platform Use the follo wing procedure to install a Cisco W AN Modeling T ools sub-applicatio n on a UNIX Platfo rm. S ...

  • Cisco OL-10426-01 - page 31

    2-9 Cisco WAN Mod e ling To ols Guide OL-10426-01, Rev. A0 Chapter 2 Ins talling the Cisco WA N Modeling Tools Removi ng Sub-a pplicat ions Step 4 If you are goi ng to use th e tar file for your NMT data, copy tar .exe and SSIDOSKT .T AR to a DO S working dire ctory . Step 5 Enter th e comman d ' tar xvf SSIDOSKT .T AR to u n-arc hive the data ...

  • Cisco OL-10426-01 - page 32

    2-10 Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 Chapter 2 In stalling the Cisco WAN Modeling Tools Tro ublesh ooti ng NM T In stal lati on Symptom NMT disp lays t he following error message : Xlib: Connection to <IP-ADDRESS:00> refused by server. Xlib: Client is not authorized to connect to server. ERROR, cannot open display <IP ...

  • Cisco OL-10426-01 - page 33

    C HA PTER 3-1 Cisco WAN Mod e ling To ols Guide OL-10426-01, Rev. A0 3 Using the NMT This ch apter pro vides instructio ns for u sing the NMT inte rface, presents an o vervie w of the modeli n g process, and list s NMT comm ands tha t upda te or extract info rmati on from NMT c onfiguration files. Thi s chapter contain s the follo wing sections: ? ...

  • Cisco OL-10426-01 - page 34

    3-2 Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 Chapter 3 Using the N MT NMT Menu Bar Figur e 3-1 NMT Main Window NMT Menu Bar The menu s in the NMT ma in window contain sel ections fo r inputti ng data that de scribe s the existing or propos ed net work. Th ese m enus al so pr ovide sele ctions for genera ting o ptimiz ed configur ation ...

  • Cisco OL-10426-01 - page 35

    3-3 Cisco WAN Mod e ling To ols Guide OL-10426-01, Rev. A0 Chapter 3 Using the NM T File M enu Figur e 3-2 NMT Design M enu (All Menu Options Displa yed) When you hi ghlight a menu item , a one-li ne descr iption of t he sele ction is di splayed be neath the menu . The NMT Design menu s and their men u items are furt her desc ribed in the sec tions ...

  • Cisco OL-10426-01 - page 36

    3-4 Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 Chapter 3 Using the N MT File Menu • V iew Summary —Shows a su mmar y of the cu rren t topo logy . • Report Site —Shows a summary of a spec ific site. Saving Configurations Sav e your c onfiguration regularl y . The di recto ry path is shown in the b ottom left o f the w indow . W he ...

  • Cisco OL-10426-01 - page 37

    3-5 Cisco WAN Mod e ling To ols Guide OL-10426-01, Rev. A0 Chapter 3 Using the NM T File M enu • Nodes —User defined node types and re straints . • Paramet ers... —Global ne twork set tings an d mode l opti ons. • Utilitie s... —Utilitie s for making global m odif ications to the conf iguration f ile. • T able Scan —Scans a ll loade ...

  • Cisco OL-10426-01 - page 38

    3-6 Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 Chapter 3 Using the N MT File Menu Utilities Use the Utilities in the Conf ig menu to make b ulk chang es to the CNF fil e. • Expand Quan tities — For al l r ecords for quantity f ield v alue of greater tha n one, change the quan tity v alue to one and duplic ate the record the nu mber o ...

  • Cisco OL-10426-01 - page 39

    3-7 Cisco WAN Mod e ling To ols Guide OL-10426-01, Rev. A0 Chapter 3 Using the NM T Display Menu Defaults T o create y our o wn defaults for a ny or all tables, create a CNF f ile and ca ll it DEF A UL TS. Sav e it to your working dire ctory . Any new record s you create for a field in any table will have the values of the first entry in th at tab ...

  • Cisco OL-10426-01 - page 40

    3-8 Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 Chapter 3 Using the N MT Di splay Me nu Report Men u Use the Report menu to define, genera te, display , a nd sav e report s. The menu contai ns the following options: Def ine Selects which tables to include in a report. Figure 2-5 sho ws the Def ine Report wind ow . In this window you can s ...

  • Cisco OL-10426-01 - page 41

    3-9 Cisco WAN Mod e ling To ols Guide OL-10426-01, Rev. A0 Chapter 3 Using the NM T Keyboard Com mands Figur e 3-5 Report Options Maintenan ce Me nu Use the Maintenance menu to revise pro duct costs, add optio nal equi pment (f or refere nce purp oses), and provide i nform ation about li ne costs. Th is men u also allows you to re ad, wri te, eras ...

  • Cisco OL-10426-01 - page 42

    3-10 Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 Chapter 3 Using the N MT Keyboard Commands The NM T has many keyboard comma nds to help yo u create and revise configur ation t ables a nd repor ts. Ta b l e 3 - 1 lists the Sun workstation ke y assignments used for editi ng data in the NMT . T able 3-1 Sun Ke y Assignme nts Ke y Function D ...

  • Cisco OL-10426-01 - page 43

    3-11 Cisco WAN Mod e ling To ols Guide OL-10426-01, Rev. A0 Chapter 3 Using the NM T Modeling Pr ocesses Help Keys Y ou can ge t help usi ng keyboard comma nds as fol lows: • Pres sing th e F1 key . If you are u nsur e wh at da ta to ente r wh en the c ursor is in a fie ld of a t abl e, yo u can press the F1 key t o displ ay a help screen t hat l ...

  • Cisco OL-10426-01 - page 44

    3-12 Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 Chapter 3 Using the N MT Error Checking The NMT generates thr ee types of messages: • L —Log m essages are genera lly displa yed wh en th e NMT r ecords t he com mand the user request ed. • I —Informati onal messages genera lly indicate that site or lin k parameters ha ve been modif ...

  • Cisco OL-10426-01 - page 45

    3-13 Cisco WAN Mod e ling To ols Guide OL-10426-01, Rev. A0 Chapter 3 Using the NM T Tro ubl esho oti ng NM T Troubleshooting NMT The tab le below describe s a common NM T proble ms and what can be done about it. Symptom Y our mou se do es not work on the PC version of NM T . Note The mouse is not supported in the UNIX ver sion of NMT . Prob able C ...

  • Cisco OL-10426-01 - page 46

    3-14 Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 Chapter 3 Using the N MT Troublesho oting NMT ...

  • Cisco OL-10426-01 - page 47

    C HA PTER 4-1 Cisco WAN Mod e ling To ols Guide OL-10426-01, Rev. A0 4 Configuration Tables and Fields This cha pter descri bes the fields in the t ables ac cessed thro ugh the Configur e menu.T hese tab les descri be sites, link s, traffic types, and more. This data ca n be create d and edite d with the NMT , or imported into the tables fr om othe ...

  • Cisco OL-10426-01 - page 48

    4-2 Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 Chapter 4 Configur ation Tables and Field s Sites Table Sites Table The sites tab le contains info rmation about all sites in your network. All o ther tables u sing the sites f ield rely on th e information in this table. T o display the sites ta ble, select Site from the Configure me nu. Th ...

  • Cisco OL-10426-01 - page 49

    4-3 Cisco WAN Mod e ling To ols Guide OL-10426-01, Rev. A0 Chapter 4 Configurat ion Table s and Fiel ds Sites T able Site T ype Switch M/H Function of platfor m at the site. Can be a swi tch, fe eder , control ler or a st and al one unit . STYPE * Restrict ions imposed on l inks SwRel O Software relea se of the switch(es) at this site. If blank, th ...

  • Cisco OL-10426-01 - page 50

    4-4 Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 Chapter 4 Configur ation Tables and Field s Sites Table IGX Y E T ype of feeder node. Y—fe eder nodes should be IGX. N—f eeder nodes should be IPX. This field appli es only if NMT needs to ad d a feed er no de. IGX TF N E T iered Feed er Flag. Y- for fee d er; N- for rou ter . This field ...

  • Cisco OL-10426-01 - page 51

    4-5 Cisco WAN Mod e ling To ols Guide OL-10426-01, Rev. A0 Chapter 4 Configurat ion Table s and Fiel ds Sites T able PNNI_P G N 0 name of the PNN I group , as defined in the PNNI Domai ns table. If the n ame in t his table is not in the PNNI Dom ain table, then it is ju st represents a lo gical grouping that t he user can d efine any way t hey w is ...

  • Cisco OL-10426-01 - page 52

    4-6 Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 Chapter 4 Configur ation Tables and Field s Li nks Ta ble Configuring Sites Example This se ction provides an example for co nfiguring Si tes. Step 1 Ent er the info rmat ion sho wn in Ta b l e 4 - 2 into the Sites table. Note Except wh ere no ted in this t able, each nod e uses defa ult val ...

  • Cisco OL-10426-01 - page 53

    4-7 Cisco WAN Mod e ling To ols Guide OL-10426-01, Rev. A0 Chapter 4 Configurat ion Table s and Fiel ds Links Tab le Minimal L ink Table Usa ge For existing links, the Keep f ield should be set to the number of existing links, with th e characteristics describe d in t he rec ord. T he Links comm and displa ys exist ing links and poss ible links con ...

  • Cisco OL-10426-01 - page 54

    4-8 Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 Chapter 4 Configur ation Tables and Field s Li nks Ta ble K eep 1 E Number of e x isting links. If the Keep field is 0, the link will be ign ored in the ro ut e command and considered for the optim ize commands. KEEP * Since slot, por t are included, this fi eld is always set to 1. * Used 0 ...

  • Cisco OL-10426-01 - page 55

    4-9 Cisco WAN Mod e ling To ols Guide OL-10426-01, Rev. A0 Chapter 4 Configurat ion Table s and Fiel ds Links Tab le $/Mo 0 E Cost per mon th of trun k from Sit e 1 to Site 2. If blank, NMT calculates cost using the Dist field and the data in the Line Cost T able (in the Maintenance menu). If you enter a v alue here, use zero in the Distan ce field ...

  • Cisco OL-10426-01 - page 56

    4-10 Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 Chapter 4 Configur ation Tables and Field s Link Special Cases Link Special Cases This section descr ibes link table conf iguration for the follo wing special cases: • A TM Trunks • V irtual Trunks IMATM Tr unks An IM A TM trun k is an A TM lin k of one to eig ht DS 1 li nes. Each I MA ...

  • Cisco OL-10426-01 - page 57

    4-11 Cisco WAN Mod e ling To ols Guide OL-10426-01, Rev. A0 Chapter 4 Configurat ion Table s and Fiel ds Voice Tabl e Virtual Trunks The v irtual trunking f eatur e in troduce s the c oncept of defining m ultip le trunk s with in a sin gle trun k port interfac e. It wa s dev elope d to p rovide co nnect ivity for a hybrid networ k con sistin g of C ...

  • Cisco OL-10426-01 - page 58

    4-12 Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 Chapter 4 Configur ation Tables and Field s Voice Table Qty 1 M Quantity . Number of connections of t he specif ied type. CONNS * Since slot and p ort are included, this field is al ways set to 1. * T ype C 32 M/H T ype of v oice connection. TY PE * Deri ved heuristically prior to Release 8 ...

  • Cisco OL-10426-01 - page 59

    4-13 Cisco WAN Mod e ling To ols Guide OL-10426-01, Rev. A0 Chapter 4 Configurat ion Table s and Fiel ds Voice Tabl e BC T1/T1 E/H Back card type (CD P Set). Use worksta tion Help or F1 2 key for choice list. BC1 / BC2 */* Until Release 9.1, f ield was d et er mi ne d heuristically , based on the ob served ports used. Fdr1ID 0 E Feeder 1 ID. Logica ...

  • Cisco OL-10426-01 - page 60

    4-14 Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 Chapter 4 Configur ation Tables and Field s Data Table Data Table The D ata T able contai ns topol ogica l inf ormatio n abou t legacy dat a conn ectio ns in t he net work. T he important f ields in the d ata table ar e the site e nds, the typ e, and the Ba ckCard f ield. The type def ines ...

  • Cisco OL-10426-01 - page 61

    4-15 Cisco WAN Mod e ling To ols Guide OL-10426-01, Rev. A0 Chapter 4 Configurat ion Table s and Fiel ds Data Table Port ID 2 0 E Lo gical slot/port nu mber at the remote site for the con nection. (Y ou can assign or NMT wi ll assign.) ID2 Qty 1 M Quantity . Number of data conn ecti ons. CONNS * Sinc e slot and p ort are includ ed , th is field is ...

  • Cisco OL-10426-01 - page 62

    4-16 Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 Chapter 4 Configur ation Tables and Field s Data Table %Util. 60/60 E Connection u tilization percentage for DFM connect ions; not used if DF M column is N. PCT_ UT IL 1 / PCT_ UT IL 2 Defaul ts us ed p ri or to Release 8.5 and for Fas tP AD. The data may be unreliable if it changed after a ...

  • Cisco OL-10426-01 - page 63

    4-17 Cisco WAN Mod e ling To ols Guide OL-10426-01, Rev. A0 Chapter 4 Configurat ion Table s and Fiel ds Bursty Tabl e Bursty Table The Bursty T able contains topologic al information ab out Frame Relay , A TM, and circui t emulation connect ions in the netwo rk. The importan t field s in the bu rsty table are th e site ends, the type, and the Back ...

  • Cisco OL-10426-01 - page 64

    4-18 Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 Chapter 4 Configur ation Tables and Field s Bursty Table T able 4-8 Bursty T able Field Defaults Notes Description and Comm ents DBF CET TPI Site 1 – M/H Site name of the owner of a connection. SITE1 * Master node unav ailable until 8.1; assume d to be Site 1. * Port 1 0 E Logical sl ot/p ...

  • Cisco OL-10426-01 - page 65

    4-19 Cisco WAN Mod e ling To ols Guide OL-10426-01, Rev. A0 Chapter 4 Configurat ion Table s and Fiel ds Bursty Tabl e FS Y O Y/N flag indicating if the connection has ForeSight implemented or not. Foresight only applies to FR and ABR connections, or FR A TM multi segment connections. FS MIR(SC R/ MCR) 64.0/64.0 M Minimum Information Rate that is g ...

  • Cisco OL-10426-01 - page 66

    4-20 Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 Chapter 4 Configur ation Tables and Field s Bursty Table FrontCard O Front card. In some cases, multip le front cards can sup port a service o n a platform. In those cases, y ou can specify the front card you want. FC1 / FC2 Only filled in for FRS M-H S cards. Application blank O Only requi ...

  • Cisco OL-10426-01 - page 67

    4-21 Cisco WAN Mod e ling To ols Guide OL-10426-01, Rev. A0 Chapter 4 Configurat ion Table s and Fiel ds Bursty Tabl e Endpoint Add res s The ID of the connection. DLCI for FR, VPC/VCI for A TM. These addresses are the IDs of the conn ecti on as it enters and e xits the A TM W AN cloud. ADDRESS1 / ADDRESS2 ** Routin g Add res s The ID of the connec ...

  • Cisco OL-10426-01 - page 68

    4-22 Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 Chapter 4 Configur ation Tables and Field s Bursty Table Current _Ro ute O The current route, from CET e xtractions. Route is stor ed in 19 f ields. .. CR_SITE2, CR_SITE3, CR_SITE4, ... CR_SITE20 Not av ailable until Release 7.2. Specif ic T runk not av ailable until Release 8.1. Current ro ...

  • Cisco OL-10426-01 - page 69

    4-23 Cisco WAN Mod e ling To ols Guide OL-10426-01, Rev. A0 Chapter 4 Configurat ion Table s and Fiel ds Bursty Tabl e Bursty Table Special Cases The Bursty T raf fic T able configu ration informat ion will be diff erent for the followin g special cases: • A TM Co nnectio ns • T wo Segmen t Con nection s The conf iguration for t hese types of c ...

  • Cisco OL-10426-01 - page 70

    4-24 Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 Chapter 4 Configur ation Tables and Field s Interface Tabl e Two Segment Connections Use the NMT to model A TM to Fram e Relay int erworki ng connec tions an d A TM to Circu it Emul ation connec tions. Re fer to Ta b l e 4 - 1 0 for informa tion on mo deling A TM and FR conn ections. Ref er ...

  • Cisco OL-10426-01 - page 71

    4-25 Cisco WAN Mod e ling To ols Guide OL-10426-01, Rev. A0 Chapter 4 Configurat ion Table s and Fiel ds Interfac e Table Speed 0 O/H Clock speed o f the access port. V alues range from • 56 to 2048 k bps for frame relay • 3622 t o 38336 for A T M on an AUSM on an MGX 8220 edge con centrat or . • 80000 , 96 000, o r 3532 08 f or A TM on a B P ...

  • Cisco OL-10426-01 - page 72

    4-26 Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 Chapter 4 Configur ation Tables and Field s Feeder Tabl e Feeder Table The Fee der tab le co ntain s top ologic al info rmati on about feeder con necti ons in th e network . IngMinBw 0 0 Minimum band width in cps in the ingress (recei ve) dir ection reserved for this partition. Zero value m ...

  • Cisco OL-10426-01 - page 73

    4-27 Cisco WAN Mod e ling To ols Guide OL-10426-01, Rev. A0 Chapter 4 Configurat ion Table s and Fiel ds Card Table Card Table The Card table is an optio nal table that s pecif ies the cards that popul ate the chassis. Links and conn ections may use thes e cards. T able 4-14 Car d T able Field Defaults Notes Description and Comm ents DBF CET TPI No ...

  • Cisco OL-10426-01 - page 74

    4-28 Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 Chapter 4 Configur ation Tables and Field s Groups and N etwork Ta ble Groups and Network Table The Gro ups and Ne twork T a ble defen se the PN NI Peer gr oups, the ir para mete rs, and th eir rela tionship s. In W ANDL, this data is translate d to the HPNNI file . Note In the MS Excel and ...

  • Cisco OL-10426-01 - page 75

    4-29 Cisco WAN Mod e ling To ols Guide OL-10426-01, Rev. A0 Chapter 4 Configurat ion Table s and Fiel ds No des Table Nodes Table The N odes T a ble d efines node typ es the NMT does not support . Futur e switche s, oth er Cisco W AN or feeder platfo rms, or othe r vendor switch es can be defined in th is table. Note The Nodes table is not transla ...

  • Cisco OL-10426-01 - page 76

    4-30 Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 Chapter 4 Configur ation Tables and Field s Netw ork Sett ings P Delay Limit Maximum delay (in ms) that can be sustaine d for this connection type . A Delay Limit Maximu m delay (in ms) that can be sustained for this connectio n type, if applic able. NTS Delay Limit Maximum delay (in ms) th ...

  • Cisco OL-10426-01 - page 77

    4-31 Cisco WAN Mod e ling To ols Guide OL-10426-01, Rev. A0 Chapter 4 Configurat ion Table s and Fiel ds Model Options Model Options Select ing Mod el o ptions from the Config<Gl obal menu allows you to specify the mode l parameter settings listed in Ta b l e 4 - 1 7 . T able 4-1 8 Execut e Menu Model P aram ete r Sett ings Setting Defaults Desc ...

  • Cisco OL-10426-01 - page 78

    4-32 Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 Chapter 4 Configur ation Tables and Field s Feeders Feeders Specify al l feeder eq uipment in the MG X, IGX, and IPX produ cts explic itly in the Site s table. Y ou can also us e th e NMT to pr ovision feede rs as requir ed by the con nection demand . Y o u ca n even provision additi onal r ...

  • Cisco OL-10426-01 - page 79

    4-33 Cisco WAN Mod e ling To ols Guide OL-10426-01, Rev. A0 Chapter 4 Configurat ion Table s and Fiel ds Feeders Implicit I GX and I PX feeders c a n be ge nerated when an IGX is used as t he hub, b ut only when t he traf fic demands on the IG X exceed the resource s of one nod e. The ref ore, if the hub is an I GX, and you want to design IGX or IP ...

  • Cisco OL-10426-01 - page 80

    4-34 Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 Chapter 4 Configur ation Tables and Field s Feeders Modeling E xplicit Fe eders T o allo w the NMT to model ex plicit feeder s, enter the follo wing information about th e feeder site into the Site table: • link c onnecting the hub an d feede r in the Link table • connect ion interfac e ...

  • Cisco OL-10426-01 - page 81

    4-35 Cisco WAN Mod e ling To ols Guide OL-10426-01, Rev. A0 Chapter 4 Configurat ion Table s and Fiel ds Obsolete Product s Refer to Ta b l e 4 - 2 0 for inf ormati on on m odelin g an e xplicit f eeder t iered n etw ork wit h the N MT . Obsolete Products The se ctions that follow discuss obsol ete pr oducts and configurat ions. T hese se ction s a ...

  • Cisco OL-10426-01 - page 82

    4-36 Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 Chapter 4 Configur ation Tables and Field s Obsolete Prod ucts Networks with Ac cess Feeders or Ac cess Con centrato rs IPX and IG X switches can inclu de de vices tha t do the follo wing tasks : • conce ntrate sm all con nections i nto larg e ones • con vert nor mal voi ce or leg acy d ...

  • Cisco OL-10426-01 - page 83

    4-37 Cisco WAN Mod e ling To ols Guide OL-10426-01, Rev. A0 Chapter 4 Configurat ion Table s and Fiel ds Obsolete Product s Addin g MC3810 burst y dat a conn ections Bursty T raffic table Ty p e f i e l d : E n t e r F R . BC (Back Card) field: On the connectio n side that uses a MC3 810, enter the back card o f the FTC card that link s the hub IP ...

  • Cisco OL-10426-01 - page 84

    4-38 Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 Chapter 4 Configur ation Tables and Field s Fast PAD FastPAD A FastP AD conne ctio n is a co nnect ion wh ere at lea st one e nd ter mina tes on a Fast P AD. FastP AD s always connec t to the n etwork o n a Frame Relay com posite link to a n FTM or FT C car d. FastP AD ena bles yo u to conc ...

  • Cisco OL-10426-01 - page 85

    4-39 Cisco WAN Mod e ling To ols Guide OL-10426-01, Rev. A0 Chapter 4 Configurat ion Table s and Fiel ds FastPAD T able 4-22 F astP AD Configur ation T opic Required Setting s Comments Setting S witch Software Release Model S ettings tab le Make su re that the valu e of Switch Software Rele ase is set to the release th at is to be m odeled. If that ...

  • Cisco OL-10426-01 - page 86

    4-40 Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 Chapter 4 Configur ation Tables and Field s Fast PAD Setting Up Switched Vo i c e C o n n e c t i o n s V oice T raffic table Connect the F astP ADs: • Quantity f ield: Set th e number of connection s between a pair of F astP ADs to the estim ated peak n umber of simu ltaneo us calls be t ...

  • Cisco OL-10426-01 - page 87

    4-41 Cisco WAN Mod e ling To ols Guide OL-10426-01, Rev. A0 Chapter 4 Configurat ion Table s and Fiel ds Port Conc entrat or Port Concentrator The Po rt Concen trator pr ov ides a meth od for conc entratin g v oice and data connect ion types as a Fram e Relay conn ection extending to an FTC or FRM card. The NMT model s and provisio ns Port Concentr ...

  • Cisco OL-10426-01 - page 88

    4-42 Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 Chapter 4 Configur ation Tables and Field s Tiered Networ ks Tiered Networks T ie red ne tworks a re a sp ecial network c onfiguratio n of Ci sco W AN s witc hes. A tiered network c onsists of a BPX or IG X hub node linked to a m aximum of 16 IPX/ IGX nod es or MGX 8220/ M GX 8850 edge conc ...

  • Cisco OL-10426-01 - page 89

    C HA PTER 5-1 Cisco WAN Mod e ling To ols Guide OL-10426-01, Rev. A0 5 NMT Execute Commands This ch apter pro vides instructio ns for u sing the NMT mode ling comman ds found in the E xecute menu. Using the Route Command Select ing Route from th e Execute menu f inds route s by using the same Autom atic Routing M anagemen t and PNNI (Pr iv ate Netw ...

  • Cisco OL-10426-01 - page 90

    5-2 Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 Chapter 5 NMT Ex ecute Co mmands Auto Route Le ast Cost Ro uting Preferred and Dire cted Ro utes NMT all ows you to provide any connec tion w ith a pa th thro ugh th e network, called a pref erred r oute. I f the prefe rred route is av ailable, NMT will follow it fo r that connection . If th ...

  • Cisco OL-10426-01 - page 91

    5-3 Cisco WAN Mod e ling To ols Guide OL-10426-01, Rev. A0 Chapter 5 NMT Execut e Commands PNNI Rout ing The NMT h as an Actual Route f ield with th e same format as Preferred Routes. CET E xtractions f ill in the Actu al Route, which is the tree r oute of th e connect ion at that time. Th e Used Pr e ferred Routes op tion in Exe c ute Settin gs de ...

  • Cisco OL-10426-01 - page 92

    5-4 Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 Chapter 5 NMT Ex ecute Co mmands Fail An alysis Command Fail Analysis Command Select ing Fa il Analysis fr om the Execute menu allo ws you to create a situatio n where one or more lines fail. Y ou can also generate a s ituatio n where the lines are f ailed o ne at a ti me (se e the Simulate ...

  • Cisco OL-10426-01 - page 93

    5-5 Cisco WAN Mod e ling To ols Guide OL-10426-01, Rev. A0 Chapter 5 NMT Execut e Commands Optimize Comm and Optimize Comma nd The NMT pro vides se veral tools for optimizing netwo rk models that allo w y ou to create a least-co st topolo gy with select ed l inks. Wh en yo u sel ect Optimize fro m the Execute menu, the NMT processes your conf igura ...

  • Cisco OL-10426-01 - page 94

    5-6 Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 Chapter 5 NMT Ex ecute Co mmands Opti mize Command Note Opt imize is not supported fo r PNNI Netwo rks. NMT Com mand Resu lts Ta b l e 5 - 4 lists the possible reasons connections ar e not being routed ov er links with the rou te co mmand . T able 5-4 Po ssible Cau ses f or Connections not R ...

  • Cisco OL-10426-01 - page 95

    5-7 Cisco WAN Mod e ling To ols Guide OL-10426-01, Rev. A0 Chapter 5 NMT Execut e Commands Optimize Comm and The fo llowing tables desc ribe how to troubl eshoot pro blems wi th Execute c omman ds. Sympt om IGX Links a re using mor e bandwidt h than expect ed for voice and data calls. Pr obable Causes V oice and Data (T S and NTS) conn ections on t ...

  • Cisco OL-10426-01 - page 96

    5-8 Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 Chapter 5 NMT Ex ecute Co mmands Opti mize Command ...

  • Cisco OL-10426-01 - page 97

    C HA PTER 6-1 Cisco WAN Mod e ling To ols Guide OL-10426-01, Rev. A0 6 NMT Reports This chap ter de scribe s the dif ferent types of reports genera ted by the NMT . NMT ascii rep orts are genera ted wi th ea ch run of e ither the Rou te c ommand or the Opti mize c ommand. Some of these repor ts can be viewed f rom t he Di spl ay menu. All ca n be w ...

  • Cisco OL-10426-01 - page 98

    6-2 Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 Chapt er 6 NMT Report s Link Load Report The Link Load repor t displays t he load resour ces on ea ch link in the network, base d on the stat ic load model. In t he ex ample bel o w , den-s ea is a cell ba sed link where t he ban dwidt h is 92% uti lized . Thi s lin k cont ains 80000 ce lls ...

  • Cisco OL-10426-01 - page 99

    6-3 Cisco WAN Mod e ling To ols Guide OL-10426-01, Rev. A0 Chapter 6 NMT Reports ATM & FR Por ts Report (or Bursty Data Ports Report) The A T M and FR Ports Report lists all ports for each site that supports a connection found in the Bursty Connection T able. This report is output in DBF format. Data & Voice Ports Report (o r Vo ice & D ...

  • Cisco OL-10426-01 - page 100

    6-4 Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 Chapt er 6 NMT Report s Parts L ist Repo rt The part s list repor t lists parts re quired to provision th e modele d network. Th e parts in cluded are the chass is, front ca rds, ba ck cards, and specia l shelves an d units. Ca bles and optional parts are usu ally not included in the pa rts ...

  • Cisco OL-10426-01 - page 101

    6-5 Cisco WAN Mod e ling To ols Guide OL-10426-01, Rev. A0 Chapter 6 NMT Reports Using the Map Tool 4 A UFMC T1 192 48 32 32 59 5 A UFMC T1 103 26 24 24 59 Legends: FPL - Fast Packet Load : Percent of FP bus load / Total bus load. GWL - Gateway Module Load : Percent of FP bus load / Max FP bus load. ================================================= ...

  • Cisco OL-10426-01 - page 102

    6-6 Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 Chapt er 6 NMT Report s Using th e Map Too l Note Th e Access , Domains and Help menus, an d the Configure op tio n in the Utility menu, are no t enabled . T o en large a r egion of the map, h old down the l eft m ouse button and se lect t he regio n of the ma p you want to enlarge. T o move ...

  • Cisco OL-10426-01 - page 103

    6-7 Cisco WAN Mod e ling To ols Guide OL-10426-01, Rev. A0 Chapter 6 NMT Reports Using the Map Tool Figur e 6-1 Example o f Networ k T opolog y Map Show ing Thr eshold Dialog Bo x Creating a Graphical Display T o cr eat e a gr aphi cal d isplay of a n ew configurat ion, p erfor m the following st eps: Step 1 Select Map from the Display me nu and dr ...

  • Cisco OL-10426-01 - page 104

    6-8 Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 Chapt er 6 NMT Report s Using th e Map Too l Using t he Map Tool t o Analyze Traf fic Levels Click on the Opti ons menu and select Thr esholds . (See Figu re 1- 1.) The Thresholds dialog box conta ins two sliding bars, Critical and Wa r n i n g , that allow you to defi ne critical and wa rni ...

  • Cisco OL-10426-01 - page 105

    C HA PTER 7-1 Cisco WAN Mod e ling To ols Guide OL-10426-01, Rev. A0 7 NMT Utilities Comm and Line NMT provid es comm ands for modifyi ng and summ arizi ng data in the NMT configurati on (.cn f) files. Most NMT f unctionality can be e xec uted in the command li ne interf ace (CLI ). Y ou can us e this featur e to write scripts and ba tch comm ands. ...

  • Cisco OL-10426-01 - page 106

    7-2 Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 Chapter 7 NMT Utilities Command Line onesite cnff ile1 cnf file2 site Spec ify one site, a nd e x tract a . cnf f ile with onl y connecti ons and lin ks that belong to that site. Useful for analyzi ng a subs ection o f a netw ork. adj2nmt <c nfn> <cnfr ef> <cnf out> Automat ...

  • Cisco OL-10426-01 - page 107

    C HA PTER 8-1 Cisco WAN Mod e ling To ols Guide OL-10426-01, Rev. A0 8 NMT Map The NMT Network Displ ay T o ol, also known as the N etwork Desi gn T op ology Map or NMT Map, provides a usef ul way to vi sualize your network m odel. The map tool p rovides t he fo llowing feat ures: • A grap hical display of y our top ology • Aid in visualizin g ...

  • Cisco OL-10426-01 - page 108

    8-2 Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 Chapter 8 NMT Map NMT Map Startup Figur e 8-1 Networ k V iew Sho wing Logi cal Nodes Figure1 0-2 shows an example of the phy sical network c orresp onding t o Figure 10 -1. Th e physica l nodes are sho wn as squares and the links between them as line s. If mul tiple g roups a re d efined and ...

  • Cisco OL-10426-01 - page 109

    8-3 Cisco WAN Mod e ling To ols Guide OL-10426-01, Rev. A0 Chapter 8 NMT Map Nav igat ing T hou gh a Netw ork View Navigating Tho ugh a Network View T o d isplay a physical network (such as the example in Fi gure 10- 2), c lick on the g roup ic ons. T o m ove do wn the hierarchy , select an ico n and click the le f t mouse b utton. The map will now ...

  • Cisco OL-10426-01 - page 110

    8-4 Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 Chapter 8 NMT Map Navigating T hough a Ne twork View Figur e 8-4 Thr ee Leve l Hier arc h y - Second L evel A left m ouse button click on the second leve l node exposes the thir d level nodes associ ated with tha t node, a nd so on. ( Figure 8- 5 ) Figur e 8-5 Thr ee Leve l Hier arc h y - Th ...

  • Cisco OL-10426-01 - page 111

    8-5 Cisco WAN Mod e ling To ols Guide OL-10426-01, Rev. A0 Chapter 8 NMT Map Obtaining Link Information - Physical Links There ar e two short cuts to tran sform Fi gure 8-1 to Figure 8-2 , or vice-versa. Sel ect Ex plode fro m the Groups me nu to view the physical netwo rk of Figure 8-2 , or sel ect C ollaps e fro m the Groups menu to view the logi ...

  • Cisco OL-10426-01 - page 112

    8-6 Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 Chapter 8 NMT Map Zooming the M ap Figu re 8-7 Li nk Disp lay for Lo gic al L inks Zoomi ng the Map T o zoom in on a re gion of the map, follo w these steps: Step 1 Mov e the cursor to a bla n k spot on the map abo ve and to the left of the ar ea you wish to en large. Step 2 Hold d own the l ...

  • Cisco OL-10426-01 - page 113

    8-7 Cisco WAN Mod e ling To ols Guide OL-10426-01, Rev. A0 Chapter 8 NMT Map Pann ing t he M ap Panning the Map T o mo ve a map to a dif ferent po sition o n the scr een, mov e the cursor to a bl ank spot on th e screen. Hold do wn the middle mous e butto n while dragging the cursor in the directio n you want the map to mo ve. When you rel ease th ...

  • Cisco OL-10426-01 - page 114

    8-8 Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 Chapter 8 NMT Map NMT Map Main Menu Figur e 8-8 NMT Repor t Menu - Set O ptions Scr een NMT Map Main Menu The NMT Map menu ba r can cont ain up to ei ght pul l-down menus for c ontrolli ng map configuratio n. (Figure 10-9) . Figur e 8-9 NMT Map Mai n Menu Each p ull-down men u is describe d ...

  • Cisco OL-10426-01 - page 115

    8-9 Cisco WAN Mod e ling To ols Guide OL-10426-01, Rev. A0 Chapter 8 NMT Map NMT Map Mai n Menu Each pu ll-do wn me nu conta ins one to s ix subm enus . The pur pose of each sub menu is desc ribe d in Ta b l e 8 - 2 . Note Select Map T ool menus by u sing the lef t mouse b utton , ex cept wh ere n oted. T o create a graphical di splay of the ne w c ...

  • Cisco OL-10426-01 - page 116

    8-10 Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 Chapter 8 NMT Map Adding New G roups Adding New Groups T o add a n ew group, pe rform the fo llowing ste ps: Step 1 Select G roups from the Main M enu. Step 2 Select Add new from the G roups Menu. The cu rsor chang es to a large black dot resem bling a group icon. Step 3 Select a no de tha ...

  • Cisco OL-10426-01 - page 117

    8-11 Cisco WAN Mod e ling To ols Guide OL-10426-01, Rev. A0 Chapter 8 NMT Map Adding Nodes to Exis ting Groups Adding Nodes to Ex isting Groups T o add a n ode to existing g roups, perfor m th e fo llowing steps: Step 1 Select G roups from the Main Men u. Step 2 Select Add to from the Groups M enu. The cu rsor cha nges to a ring, r esem bling a gr ...

  • Cisco OL-10426-01 - page 118

    8-12 Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 Chapter 8 NMT Map Deleting Gro ups Deleting Groups T o d elete a group , pe rform the f ollowing steps : Step 1 Select G roups from the Main Men u. Step 2 Select De lete from the Group s Me nu. Th e cur sor w ill ch ange to a skull and c rossbon es. Step 3 Select the group you want to del e ...

  • Cisco OL-10426-01 - page 119

    8-13 Cisco WAN Mod e ling To ols Guide OL-10426-01, Rev. A0 Chapter 8 NMT Map Saving Your Work Figur e 8-15 Map Displa y aft er Deleting Fr om a Gr oup Saving Your Work Ther e are two ways to save work: • Select Ut ility from the Main Me nu; then select Sa ve from the Utility Menu . • Select Ma in Menu<Utility< Quit ; th en select Sa ve f ...

  • Cisco OL-10426-01 - page 120

    8-14 Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 Chapter 8 NMT Map Retr ieving Map D ata Into N MT Retrieving Map Data Into NMT Once map da ta has bee n saved in the ma p, tha t d ata ca n be import ed in to NM T . T o do t his, se lect Import < Map Data fro m the NMT File Me nu ( Figure 8-17 ). Figur e 8-17 NMT File Menu (Impor t Map ...

  • Cisco OL-10426-01 - page 121

    C HA PTER 9-1 Cisco WAN Mod e ling To ols Guide OL-10426-01, Rev. A0 9 Configuration Extraction Tool This chapte r describes ho w to use the Configur ation Extract ion T ool (CET). The CET e xtracts data from the Info rmix database used by the Cisco W an Manage r (CWM). Th e CET then fo rmats the dat a into a standa rd .cnf file that can be read by ...

  • Cisco OL-10426-01 - page 122

    9-2 Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 Chapter 9 Configuration Extraction Too l Usi ng th e CET Using the CET T o extract d ata from CWM and generate an NMT -compatible .cnf f ile, perform the follow ing steps: Step 1 For the best data consis tency , make sure the net work is not run ning any adm inistra tion activ ities that add ...

  • Cisco OL-10426-01 - page 123

    9-3 Cisco WAN Mod e ling To ols Guide OL-10426-01, Rev. A0 Chapter 9 Configuratio n Extraction T ool Using the CET Step 4 This step is optional. If manual corr ectio ns are re quired on the outpu t CNF file, you can ma ke them o nce, and then automa tical ly ma ke them again with t he 'a dj2nmt ' comm and. The c omma nd only upda tes fiel ...

  • Cisco OL-10426-01 - page 124

    9-4 Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 Chapter 9 Configuration Extraction Too l Other CET Commands Figur e 9-1 CET Sche matic Ov erview Other CET Commands Ther e are sev eral ot her CET comma nds tha t may help you more effect ively use the so ftwar e: • svp_dmp. Use thi s command t o if the CET gen erate s a defect iv e .cnf f ...

  • Cisco OL-10426-01 - page 125

    9-5 Cisco WAN Mod e ling To ols Guide OL-10426-01, Rev. A0 Chapter 9 Configuratio n Extraction T ool Troubl eshooti ng CET • adj2nmt —Use this command to recreate ma nual changes on pre vious extrac tions to current extracti ons. • sniffcnf ntwk _name —U se this comman d to obtain an on-screen summa ry of the net work topolo gy . This is us ...

  • Cisco OL-10426-01 - page 126

    9-6 Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 Chapter 9 Configuration Extraction Too l Troublesho oting CET Sympt om Connectio ns are missing. Pr obable Causes Incomplete d ata in SV+ d atabase. Solut io n CWM 9.2 or higher: V iew the f iles that begin with the word extra . These con tain connect ion segments th at are in the dat a base ...

  • Cisco OL-10426-01 - page 127

    9-7 Cisco WAN Mod e ling To ols Guide OL-10426-01, Rev. A0 Chapter 9 Configuratio n Extraction T ool Troubl eshooti ng CET Symptom I nformix Error 217 (Co lumn [name of c olumn] not found in any table in the query) Prob able Causes CWM release and the Informix Database ar e incompatible. In other words, a ne w sv+ has b een installed, bu t is not i ...

  • Cisco OL-10426-01 - page 128

    9-8 Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 Chapter 9 Configuration Extraction Too l Remote CET Extracts Remote CET Extract s If you wish t o obta in a C ET extra ct fr om a CW M or SV+ Informi x da tabase lo cated on a nother workstati on, you may not need to inst all NMT or CET on the remot e platfor m. Y ou may be able to issu e th ...

  • Cisco OL-10426-01 - page 129

    9-9 Cisco WAN Mod e ling To ols Guide OL-10426-01, Rev. A0 Chapter 9 Configuratio n Extraction T ool Remote CET Extr acts • Informi x 7.2, or high er , must be insta lled on bo th your local host and the re mote host . (If CWM is install ed on eithe r host, you have met the requ irem ent for tha t host. • Y ou must know the password to the svpl ...

  • Cisco OL-10426-01 - page 130

    9-10 Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 Chapter 9 Configuration Extraction Too l Remote CET Extracts Troublesho oting Sympt om A command returns Informix error 23101: Unable to load locale categories. Pr obable Causes The INFORMIXDIR environment variable is not set correctly Solut io n Either issue the comman d, unseten v INFORMI ...

  • Cisco OL-10426-01 - page 131

    9-11 Cisco WAN Mod e ling To ols Guide OL-10426-01, Rev. A0 Chapter 9 Configuratio n Extraction T ool Remote CET Extr acts Sympt om Comman d returns In formi x erro r 908 Pr obable Causes The re mote CWM site is not up an d runnin g. Solut io n V erif y th e remo te C WM sit e is r unni ng an d can be ping ed f rom y our sit e. ...

  • Cisco OL-10426-01 - page 132

    9-12 Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 Chapter 9 Configuration Extraction Too l Remote CET Extracts ...

  • Cisco OL-10426-01 - page 133

    C HA PTER 10-1 Cisco WAN Mod e ling To ols Guide OL-10426-01, Rev. A0 10 WANDL — Third- Party In terface This c hapter d escrib es how to use the T hird-Party Interfac e (TPI ) Conv e rsion Plug -in, and c ontains the follo wing sections: • T ranslating Between NMT an d W ANDL F ormats – Con vertin g NMT Config uration Files into W ANDL Files ...

  • Cisco OL-10426-01 - page 134

    10-2 Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 Chapter 1 0 WANDL — Third-Par ty Interf ace Translating B etween NMT and WAN DL Form ats Figur e 1 0-1 TPI Sc hematic Ov erview Converting NM T Con figurati on Files into WANDL Files Use the Import and Export s elections in the File menu to read and write W ANDL file s. T o write to a sub ...

  • Cisco OL-10426-01 - page 135

    10-3 Cisco WAN Mod e ling To ols Guide OL-10426-01, Rev. A0 Chapter 1 0 WANDL — Third -Party Interf ace Transl ating Bet ween NMT and WANDL Fo rmats Use the follo wing pr ocedure to con vert NM T configur ation (.c nf) fi les into file s that can be read b y W ANDL softw are usi ng the UN IX command li ne interf ace. Step 1 Start the NMT an d ver ...

  • Cisco OL-10426-01 - page 136

    10-4 Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 Chapter 1 0 WANDL — Third-Par ty Interf ace Translating B etween NMT and WAN DL Form ats Conver ting WANDL File s into NMT .cnf Files This p rocedure i s for the con version of W ANDL f iles into f iles t hat can be read by t h e NMT . Thi s procedure p rocesses f iles specif ied in t he ...

  • Cisco OL-10426-01 - page 137

    C HA PTER 11-1 Cisco WAN Mod e ling To ols Guide OL-10426-01, Rev. A0 11 SpreadSheet Interface This chap ter des cribes the Sp readShe et Interf ace (SSI) Con versio n Plug-in, which translates network design info rmati on betwee n NMT and a Mi crosoft E xcel-com patib le format . SSI require s that you use Microso ft Excel V ersion 6.2 o r later . ...

  • Cisco OL-10426-01 - page 138

    11-2 Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 Chapter 11 S preadSheet Interface NMT to Micro soft Excel The f ollowing proc edure is for the conv ersion of an NMT .c nf file to . dbf, a M icr osoft Ex cel c ompat ible format , and ar chiving the .d bf output so that it can be moved from a UNIX workstat ion to a PC. This section also ex ...

  • Cisco OL-10426-01 - page 139

    11-3 Cisco WAN Mod e ling To ols Guide OL-10426-01, Rev. A0 Chapter 11 Spread Sheet Interfa ce NMT to Micr osoft Ex cel Figur e 1 1 -1 SSI Schematic Overview Step 3 Unarchive the file at the PC using a progr am like tar .exe for PCs and Stuf fIt Del uxe for Macint oshes. The unarchi ved f ile consists of se veral f iles, one f ile for each NMT conf ...

  • Cisco OL-10426-01 - page 140

    11-4 Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 Chapter 11 S preadSheet Interface Microsoft Exc el to NMT Microsoft Exc el to NMT The fo llowing proced ure is for th e archiving of Mi crosoft Excel files so they can be e asily moved from a PC to a UNIX wor kstation and for con ver ting the Microsoft Ex cel fi les into NMT .cnf f ile form ...

  • Cisco OL-10426-01 - page 141

    11-5 Cisco WAN Mod e ling To ols Guide OL-10426-01, Rev. A0 Chapter 11 Spread Sheet Interfa ce Usage Revie w Usage Review After creating a CNF fil e using NM T , CET , or TPI , use SSI tools to tran slate t he CNF f ile to an e xcel workbook. In the UNIX en vironme nt, do the follo wing: Step 1 run the co mmand nmt2tar . This crea tes both the DBF ...

  • Cisco OL-10426-01 - page 142

    11-6 Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 Chapter 11 S preadSheet Interface SSI TroubleShooti ng SSI TroubleShooting The tab le below describes a com mon SSI prob lem and what can be done about it. Symptom Network data ge ts rounded in correctly whe n con verting from Exce l to NMT'’ s CNF file. Pr obable Cause s The SSI use ...

  • Cisco OL-10426-01 - page 143

    C HA PTER 12-1 Cisco WAN Mod e ling To ols Guide OL-10426-01, Rev. A0 12 Cisco Network Designer Importer The Ci sco Net work Desig ner (CN D) is a PC c onfiguration sy stem fo r pre -sales CND PC Import Utilities The NMT p rov ides two PC Utilitie s for loadi ng the CNF into the Cisco Netw ork Designer , where the data is sto red as a pro ject. T a ...

  • Cisco OL-10426-01 - page 144

    12-2 Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 Chapter 12 Cisco Net work Desig ner Impor ter CND PC Import Ut ilities Nmt2Cnd Operatin g Instructions T o o perate the nmt2c nd, per form the fo llowing steps: Step 1 Shut down CND if it is running. Step 2 Launch nmt2cnd by clic king on the icon. Y ou sho uld see an M FC menu with t he fol ...

  • Cisco OL-10426-01 - page 145

    12-3 Cisco WAN Mod e ling To ols Guide OL-10426-01, Rev. A0 Chapter 1 2 Cisco Network Designer Importer CND PC Imp ort Utilities DBF2Cnd Operatin g Instructions T o run the DBF2Cnd utility , f ollo w these steps: Step 1 Click the SSI macro to start MS Exce l. Step 2 Create a n Excel w orkbook with the f ollo w ing f iles: 1. a sites sheet— The Si ...

  • Cisco OL-10426-01 - page 146

    12-4 Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 Chapter 12 Cisco Net work Desig ner Impor ter CND PC Import Ut ilities Step 10 Select Loa d< Import into CND. The CND launches and loads the projec t. Note Be sure yo ur pr oject n ame is uni que. If ano ther p roje ct exists under the sa me name, an e rror message will appea r and your ...

  • Cisco OL-10426-01 - page 147

    IN-1 Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 INDEX A acces s feeder s 4-36 Ad field 4-12, 4-15, 4-20 Alterna tive Route co mmand 5-4 AutoRoute 5-1 B Back car d fi eld 4-4, 4-19 Back ca rd type fi eld 4-13, 4-16 bbdsgn 10-1 BPX, descri ption of 1-3 Building Sites message box 5-5 Bundle field 4-3 C Cabinet field 4-3 Cd field 4-15 CET 9- ...

  • Cisco OL-10426-01 - page 148

    Index IN-2 Cisco WAN Mo deling Tools Guide OL-10426-01, Re v. A0 enviro nment variab les NMTHOME 2- 4 eras e file 3-4 error ch ecking, au tomatic 3-12 erro r messag es 3-11 errors a nd w arnin gs 3-11 Exce l macro s 11-2, 11-4 Micro soft Ex cel 11-1 Explicit fe eders BC field 4-35 creat ing in NM T 4-35 Type fi eld 4-35 F FastPAD 4-38 adding c onne ...

  • Cisco OL-10426-01 - page 149

    Inde x IN-3 Cisco WAN Mod eling To ols Guide OL-10426-01, Rev. A0 port to multiport 4-34 Type fi eld 4-33 MGX 822 0 shelf 1-3 Micro soft Ex cel 11-1 Minim um Info rmation Ra te field 4-19 MIR( MCR ) field 4-19 model para meter s configuratio n 3-5 Modem % field 4-3 N Name field 4-26 navigat ion 3-9 Network M odeli ng Tool . See NMT. New S hare wit ...

  • Cisco OL-10426-01 - page 150

    Index IN-4 Cisco WAN Mo deling Tools Guide OL-10426-01, Re v. A0 StrataVi ew Plus, impo rting fr om 9-1 svp2c et command 9-2 switch software version 3-5 T tabl e scan 3-12 tar2nmt com mand 11-4 Thi rd Part y Inte rface. S ee TPI. Threshol ds dia log box 6-8 tier ed netw orks explicit feed ers 4-35 IPX/IGX fe eders 4-33 MGX 822 0 feeders 4-33 TPI sc ...

Manufacturer Cisco Category Network Card

Documents that we receive from a manufacturer of a Cisco OL-10426-01 can be divided into several groups. They are, among others:
- Cisco technical drawings
- OL-10426-01 manuals
- Cisco product data sheets
- information booklets
- or energy labels Cisco OL-10426-01
All of them are important, but the most important information from the point of view of use of the device are in the user manual Cisco OL-10426-01.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Cisco OL-10426-01, service manual, brief instructions and user manuals Cisco OL-10426-01. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Cisco OL-10426-01.

Similar manuals

A complete manual for the device Cisco OL-10426-01, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Cisco OL-10426-01 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Cisco OL-10426-01.

A complete Cisco manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Cisco OL-10426-01 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Cisco OL-10426-01, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Cisco OL-10426-01, that we can find in the current document
3. Tips how to use the basic functions of the device Cisco OL-10426-01 - which should help us in our first steps of using Cisco OL-10426-01
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Cisco OL-10426-01
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Cisco OL-10426-01 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Cisco OL-10426-01?

Use the form below

If you did not solve your problem by using a manual Cisco OL-10426-01, ask a question using the form below. If a user had a similar problem with Cisco OL-10426-01 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)