English dropdown-ico

Manual Konica Minolta 160f

302 pages 3.69 mb
Download

Go to site of 302

Summary
  • Konica Minolta 160f - page 1

    *9961016300* *9961016300* www .konicaminoltaeurope.com Copyright 2005 KONICA MINOL T A BUSINESS TECHNOLOGIES, INC. Konica Minolta Business Solutions Europe GmbH Europaallee 17 D-30855 Langenhagen Phone +49 (0)5 11 74 04-0 Fax +49 (0)5 11 74 10 50 Printed in Germany User Manual 1 6 0 f 1 0 2 3 4 5 6 7 8 9 User Manual 160f Umschlag-O-Mat v1.4 | V orl ...

  • Konica Minolta 160f - page 2

    . ...

  • Konica Minolta 160f - page 3

    x Contents ...

  • Konica Minolta 160f - page 4

    ...

  • Konica Minolta 160f - page 5

    bizhub 160f x-3 Contents 1I n t r o d u c t i o n 1.1 Safety information ........................................................ .................... 1- 3 Warning and precaution symbols ................. ................................. 1-4 Meaning of symbols ................................................................ ....... 1-4 Disassemble ...

  • Konica Minolta 160f - page 6

    x-4 bizhub 160f 1.5 Explanation of manual conventions ......... ......................................1-25 Safety advices . .................................................................. ............ 1-25 Sequence of action ...... ................................................................. 1 -25 Tips ...................................... ...

  • Konica Minolta 160f - page 7

    bizhub 160f x-5 3.7 Useful functions .................... .......................................................... 3-21 Panel resetting .............................................. ............................... 3-21 Auto panel reset ...................................................................... ..... 3-21 Energy save mode ............ ...

  • Konica Minolta 160f - page 8

    x-6 bizhub 160f Speed dial list ............................................................................... 3 -46 Key setting list . .................................................................. ............ 3-46 Machine status .......................... .................................................... 3 -46 Configuration page ........ ...

  • Konica Minolta 160f - page 9

    bizhub 160f x-7 5.3 Basic Faxing ........................................ ............................................ 5-15 To fax using the automatic docum ent feeder .............................. 5-15 To fax documents positioned on the original gl ass ................ ..... 5-17 If the memory becomes full while sc anning fax documents ........ 5 ...

  • Konica Minolta 160f - page 10

    x-8 bizhub 160f 6.2.4 Polling Reception .............................................................. ............ 6-25 To receive a fax using polling reception ....................................... 6-25 6.3 Using F codes ................. ................................................................. 6-27 6.3.1 Using Mailboxes .............. ...

  • Konica Minolta 160f - page 11

    bizhub 160f x-9 7.6 Fax registration settings ...... .......................................................... 7-26 Selecting the FAX REGIS TRATION menu ............................... ..... 7-27 Specifiying ONE-TOUCH DIAL .................................................... 7-28 To program a one-touch dial key ..... .............................. ...

  • Konica Minolta 160f - page 12

    x-10 bizhub 160f 7.9 Communication settings ........................................ .........................7-70 Selecting the COMM. SETTING menu ................. ......................... 7-70 Specifying TONE/PULS E .............................................................. 7-71 To specify the telephone dialing system ...................... ...

  • Konica Minolta 160f - page 13

    bizhub 160f x-11 8.7 When the message PAPE R SIZE ERROR appear s ...................... 8- 24 PAPER SIZE ERROR mes sage .................................. .................. 8-24 Paper size error for tray 1 .......................................... .................. 8-24 Paper size error for the bypass tray ........................... ........... ...

  • Konica Minolta 160f - page 14

    x-12 bizhub 160f ...

  • Konica Minolta 160f - page 15

    1 Introduction ...

  • Konica Minolta 160f - page 16

    ...

  • Konica Minolta 160f - page 17

    Introduction 1 bizhub 160f 1-3 1I n t r o d u c t i o n 1.1 Safety information This section contains detailed i nstructions on the operation and maintenance of this machine. To achieve optimum utility of this device, all operators should carefully read and follow the instructi ons in this manual. Please read the following section before connecting ...

  • Konica Minolta 160f - page 18

    1 Introduction 1-4 bizhub 160f Warning and precaution symbols The following indicators are used on the warning la bels or in this manual to categorize the level of safety warnings. 7 WARNING Ignoring this warnings could cause serious injury or ev en death. % Do not ignore this safety advices. 7 CAUTION Ignoring this cautions could cause injury or d ...

  • Konica Minolta 160f - page 19

    Introduction 1 bizhub 160f 1-5 Disassemble and modification 7 WARNING Ignoring this warnings could cause serious injury or even death. % Do not ignore this safety advices. Warning Symbol • Do not attempt to remove the covers and panels wh ich have been fixed to the product. Some products have a high-volt- age part or a laser beam source in side t ...

  • Konica Minolta 160f - page 20

    1 Introduction 1-6 bizhub 160f Power cord 7 WARNING Ignoring this warnings could cause serious injury or ev en death. % Do not ignore this safety advices. Warning Symbol • Use only the power cord supplied in the package. If a power cord is not supplied, only use th e power cord and plug that is specified in POWER CORD INSTRUCTION. Failure to use ...

  • Konica Minolta 160f - page 21

    Introduction 1 bizhub 160f 1-7 Power source 7 WARNING Ignoring this warnings could cause serious injury or even death. % Do not ignore this safety advices. 7 CAUTION Ignoring this cautions could cause injury or damage to property. % Do not ignore this safety advices. Warning Symbol • Use only the specified power sourc e voltage. Failure to do tha ...

  • Konica Minolta 160f - page 22

    1 Introduction 1-8 bizhub 160f Power plug 7 WARNING Ignoring this warnings could cause serious injury or ev en death. % Do not ignore this safety advices. 7 CAUTION Ignoring this cautions could cause injury or damage to property. % Do not ignore this safety advices. Warning Symbol • Do not unplug and plug in the power cord with a wet hand, as an ...

  • Konica Minolta 160f - page 23

    Introduction 1 bizhub 160f 1-9 Grounding 7 WARNING Ignoring this warnings could cause serious injury or even death. % Do not ignore this safety advices. Warning Symbol • Connect the power cord to an e lectrical outlet that is equipped with a groun ding terminal. ...

  • Konica Minolta 160f - page 24

    1 Introduction 1-10 bizhub 160f Installation 7 WARNING Ignoring this warnings could cause serious injury or ev en death. % Do not ignore this safety advices. 7 CAUTION Ignoring this cautions could cause injury or damage to property. % Do not ignore this safety advices. Warning Symbol • Do not place a flower vase or other c ontainer that contains ...

  • Konica Minolta 160f - page 25

    Introduction 1 bizhub 160f 1-11 Ventilation 7 CAUTION Ignoring this cautions could cause injury or damage to property. % Do not ignore this safety advices. Caution Symbol • Always use this product in a well ventilated l ocation. Operat- ing the product in a poorly ven tilated room for an extended period of time could injure your health . Ventilat ...

  • Konica Minolta 160f - page 26

    1 Introduction 1-12 bizhub 160f Actions in response to troubles 7 WARNING Ignoring this warnings could cause serious injury or ev en death. % Do not ignore this safety advices. 7 CAUTION Ignoring this cautions could cause injury or damage to property. % Do not ignore this safety advices. Warning Symbol • Do not keep using this product, if this pr ...

  • Konica Minolta 160f - page 27

    Introduction 1 bizhub 160f 1-13 Consumables 7 WARNING Ignoring this warnings could cause serious injury or even death. % Do not ignore this safety advices. 7 CAUTION Ignoring this cautions could cause injury or damage to property. % Do not ignore this safety advices. Warning Symbol • Do not throw the toner cartridge or toner into an open flame. T ...

  • Konica Minolta 160f - page 28

    1 Introduction 1-14 bizhub 160f When moving the machine 7 CAUTION Ignoring this cautions could cause injury or damage to property. % Do not ignore this safety advices. Before successive holidays 7 CAUTION Ignoring this cautions could cause injury or damage to property. % Do not ignore this safety advices. Caution Symbol • Whenever moving this pro ...

  • Konica Minolta 160f - page 29

    Introduction 1 bizhub 160f 1-15 1.2 Regulation notices CE Marking (Declar ation of conformity) This product complies with the following EU directives: 89/336/EEC, 73/23/EEC and 93/68/EEC directives. This declaration is valid for the region of the European Union. 7 CAUTION Interference with radio communications. % This device must be used with s hie ...

  • Konica Minolta 160f - page 30

    1 Introduction 1-16 bizhub 160f 7 WARNING Any changes made by the purchaser or user without first contacting the manufacturer will be subject to penalty under FCC regulations. % The design and production of this unit conform to FCC regulations, and any changes or modifications must be registered with the FCC and are subject to FCC control. 7 CAUTIO ...

  • Konica Minolta 160f - page 31

    Introduction 1 bizhub 160f 1-17 For Canada Users Interference-Causing Equipment Standard (ICES- 003 Issue 3) This Class B digital apparatus complies with Canadian ICES- 003. Cet appareil numérique de la c lasse B est conforme à la norme NMB-003 du Canada. For users in countries subject to class B r egulations 7 CAUTION Interference with radio com ...

  • Konica Minolta 160f - page 32

    1 Introduction 1-18 bizhub 160f Internal laser radiation This product employs a class 3b laser diode that emits an invisible laser beam. The laser diode and the scann ing polygon mirror are incorporated in the prin t head unit. 7 WARNING Incorrect handling may result in hazar dous radiation exposure. % The print head unit is not a field-service abl ...

  • Konica Minolta 160f - page 33

    Introduction 1 bizhub 160f 1-19 CDRH regulation This machine is certified as a cl ass 1 laser product under radiation perform- ance standard according to the Food, Drug and Cosmetic Act of 1990. Com- pliance is mandatory for la ser products marketed in the Uni ted States and is reported to the Center for Devices and Radiol ogical Health (CDRH) of t ...

  • Konica Minolta 160f - page 34

    1 Introduction 1-20 bizhub 160f For Denmark users 7 ADVARSEL Usynlig laserstrål ing ved åbning, når sikkerhedsafbrydere er ude af funktion. % Usynlig laserstråling ved åbning, nå r sikkerhedsafbrydere er ude af funktion. Undgå udsættelse for stråli ng. Klasse 1 laser produkt der op- fylder IEC60825 sikkerheds kravene. Dette er en halvleder ...

  • Konica Minolta 160f - page 35

    Introduction 1 bizhub 160f 1-21 7 VAROITUS Avattaessa ja suojalukitus ohitettaessa olet alttiina näkymättömäl le la- sersät eilylle. % Älä katso säteeseen. 7 VARNING Osynlig laserstrål ning när denna del är öppnad och spärren är ur kopp- lad. % Betrakta ej strålen. For Norway users 7 ADVARSEL! Dette en halvleder l aser. % Dersom appa ...

  • Konica Minolta 160f - page 36

    1 Introduction 1-22 bizhub 160f Laser safety label A laser safety label is attached to the ou tside of the machine as shown be- low. ...

  • Konica Minolta 160f - page 37

    Introduction 1 bizhub 160f 1-23 Ozone release 7 CAUTION A negligible amount of ozone is generated during norm al operation of this machine. An unpleasant odor may, however, be created in poorly ventilated rooms during extensive machine operations. For a c omfortable, healthy, and safe operating environment, it is recommended that the room be well v ...

  • Konica Minolta 160f - page 38

    1 Introduction 1-24 bizhub 160f 1.3 Energy Star ® Energy Star ® partner As an Ener gy Star ® partner, we have determined that this machine meets the Energy Star ® guidelines for energy efficiency. What is an Energy Star ® product? An Energy Star ® product has a special feature that allows it to automatically switch to a “low-power mode” a ...

  • Konica Minolta 160f - page 39

    Introduction 1 bizhub 160f 1-25 1.5 Explanation of manual conventions The marks and text formats used in this m anual are described below. Safety advices 6 DANGER Failure to observe instructions highlighted in this m anner may result in fatal or critical injuries in fact of electr ical power. % Observe all dangers in order to prevent injurie s. 7 W ...

  • Konica Minolta 160f - page 40

    1 Introduction 1-26 bizhub 160f Tips 2 Note Text highlighted in this manner contains us eful information and tips to en- sure safe use of the copier. 2 Reminder Text highlighted in this manner contains in formation that should be re- minded. ! Detail Text highlighted in this manner contains referenc es for more detailed in- formation. Special text ...

  • Konica Minolta 160f - page 41

    Introduction 1 bizhub 160f 1-27 1.6 Explanation of basi c concepts and symbols The use of words and symbols in this manual are explained below. Paper feeding During printing, paper is supplied from the right s ide of the copier and fed into the copy tray on top with the printed surface of the page facing down. The paper feed direction is shown by t ...

  • Konica Minolta 160f - page 42

    1 Introduction 1-28 bizhub 160f Width and length Whenever paper dimensions are men- tioned in this manual, the first value always refers to the width of the paper (shown as “A” in the illustration) and the second to the length (shown as “B”). A: Width B: Length B A ...

  • Konica Minolta 160f - page 43

    2 Precaution ...

  • Konica Minolta 160f - page 44

    ...

  • Konica Minolta 160f - page 45

    Precaution 2 bizhub 160f 2-3 2 Precaution Observe the following precautions to maintain the machine in its best possi- ble condition. 2.1 Installation precautions Installation site To ensure utmost safety and prevent possibl e malfunctions, install the ma- chine in a location that meets the follow ing requirements: - A location away from curtains, ...

  • Konica Minolta 160f - page 46

    2 Precaution 2-4 bizhub 160f Space requirements To ensure easy machine operation, supply repl acement, and maintenance, adhere to the recommended space requirements detailed b elow. 2 Note In order to enable easy machine maintenance and replacement of con- sumables, maintain an adequate amoun t of space around the machine. When lifting the machine, ...

  • Konica Minolta 160f - page 47

    Precaution 2 bizhub 160f 2-5 2.2 Operation precautions Operating environment The environmental requirements for correct operation of the machi ne are as follows: - Temperature: 10°C to 30°C (50°F to 86° F) with fluctuations of no more than 10°C (18°F) within an hour - Humidit y: 15% to 85% with fluctuations of no m ore than 20% within an hour ...

  • Konica Minolta 160f - page 48

    2 Precaution 2-6 bizhub 160f Transporting the machine If you need to transport the machine ove r a long distance, consult your serv- ice representative. Care of machine supplies Use the following precautions when handli ng the machine supplies (toner, paper, etc.). - Store the supplies in a location that mee ts the following requirements: – Free ...

  • Konica Minolta 160f - page 49

    Precaution 2 bizhub 160f 2-7 2.3 Legal restrictions on copying Certain types of documents must not be copied wi th the purpose or intent to pass copies of such documents off as th e originals. The following is not a complete list, bu t is meant to be used as a guide to responsible copying. Financial instruments - Personal checks - Travelers checks ...

  • Konica Minolta 160f - page 50

    2 Precaution 2-8 bizhub 160f ...

  • Konica Minolta 160f - page 51

    3 Before making copies or faxing ...

  • Konica Minolta 160f - page 52

    ...

  • Konica Minolta 160f - page 53

    Before making copies or faxing 3 bizhub 160f 3-3 3 Before making copies or faxing 3.1 Available f eatures The main copy settings av ailable with this machine are listed below. For de- tails on their operation, refer to the pages indicated. Copy settings Example Copies • 1-sided copies (p. 4-3) • 2in1 copies (p. 4-14 ) Zoom ratio • Reduc ed/Fu ...

  • Konica Minolta 160f - page 54

    3 Before making copies or faxing 3-4 bizhub 160f 3.2 Components and their functions Components and their functions Illustration Main unit bizhub 160f Paper feed unit PF-501 (op tion) Capable of holding up to 500 sheets of paper. Expanded memory unit EM-101 (option) Increases the machine’s memory (32 M B Memory). By increasing the mach ine’s mem ...

  • Konica Minolta 160f - page 55

    Before making copies or faxing 3 bizhub 160f 3-5 3.3 Parts names and their functions Main unit 2 1 3 9 10 11 15 12 4 5 7 8 6 16 14 13 No. Part name Description 1 Automati c docu- ment feeder Automatically feeds one documen t sheet at a time for scanni ng. 2 O riginal glass Place your original on thi s glass to allow the machine to scan it. The orig ...

  • Konica Minolta 160f - page 56

    3 Before making copies or faxing 3-6 bizhub 160f 5 Bypass tray Use for manual feedin g of paper. Holds up to 10 she ets of paper. Special paper can be used. (p. 3-31) 6 Tray 1 door If legal-size paper is instal led, open this door. 7 Copy tray Holds copies fed out face down from the machine. The copy tray can be adjusted to one of thre e angles. Ad ...

  • Konica Minolta 160f - page 57

    Before making copies or faxing 3 bizhub 160f 3-7 Automatic document feeder 2 1 3 4 No. Part name Description 1 Document fe eder tray Load the originals to be copied face up on this tray. Up to 50 document sheets can be loaded at one time. (p. 3-34) 2 Document fe eder cover (doc. feed cover) Open when cl earing an original that h as been misfeed. (p ...

  • Konica Minolta 160f - page 58

    3 Before making copies or faxing 3-8 bizhub 160f Inside the machine 1 No. Part name Description 1 Imagin g cartridge Generates the copy image. The imaging cartridge is constructe d of both the drum cartridge and the toner cartridge set in to place. ...

  • Konica Minolta 160f - page 59

    Before making copies or faxing 3 bizhub 160f 3-9 Adjusting the angle of the copy tray The copy tray can be adjusted to one of three angles. A djust the tray to the angle appropriate for the desired application. 1. Normal operation (standard position) 2. When back curled paper is fed out 3. When clearing a paper misfeed or replaci ng the drum cartri ...

  • Konica Minolta 160f - page 60

    3 Before making copies or faxing 3-10 bizhub 160f Options Paper Feed Unit PF-501 1 2 3 No. Part name Description 1 Tray2 Holds up to 500 sheets of paper . (p. 3-32) ...

  • Konica Minolta 160f - page 61

    Before making copies or faxing 3 bizhub 160f 3-11 Mechanical Counter MC-502 Network Interface Card NC-50 1 No. Part name Description 2 Counter Displays the total number of pages prin ted until the curren t time. No. Part name Description 3 Network conn ector (10 Base-T/100 Base TX) By installing the Network In terface Card NC-501 in to this ma- chi ...

  • Konica Minolta 160f - page 62

    3 Before making copies or faxing 3-12 bizhub 160f 3.4 Control panel Names of control panel parts and their functions 12 3 4 56 7 1 1 22 21 20 18 19 18 17 15 16 15 14 12 8 9 10 30 28 26 25 27 29 24 23 31 13 No. Part name Description 1 [Utili ty] key Press to enter utility mode. (p. 7-3) 2 [Prin ter] key Press to enter printer mode. For details, refe ...

  • Konica Minolta 160f - page 63

    Before making copies or faxing 3 bizhub 160f 3-13 8 [Scan ] key Press to enter scan mode. The indicator lights up in green to indi- cate that the machine is in scan mode. (Available only when th e Scanner Unit SU-502 is installed.) 9 [Fax] key Press to enter fax mode. The indi cator lights up in green to in di- cate that the machine is in fax mode. ...

  • Konica Minolta 160f - page 64

    3 Before making copies or faxing 3-14 bizhub 160f 29 [Speed dial] key Used to dial previously programmed fax numbers represented by 3-digit numbers. 30 [Fun ction] key Used to select a function. • BROADCAST (broadcast transmission), TIMER TX (timer trans- mission), MAILBOX TX (mai lbox transmission), PRINT MAIL- BOX RX (retrieve mail box faxes), ...

  • Konica Minolta 160f - page 65

    Before making copies or faxing 3 bizhub 160f 3-15 Display indications – in copy mode [A] 12 3 45 No. Display indication Description 1 Docume nt type Displays the document type curren tly specified for the i mage den- sity. 2 Zoom ra tio Displays the cu rrently specified zoom ratio. 3 Nu mber of copies Displays the currently specified number of co ...

  • Konica Minolta 160f - page 66

    3 Before making copies or faxing 3-16 bizhub 160f Display indications – in fax mode 1 2 2 1 34 5 6 No. Display indication Description 1 Me ssages Displays messages such as operating instructions. 2 Mode or func tion name • Displays the current men u, function or settings. • Error messages are displayed when errors occu r. 3 Time The current t ...

  • Konica Minolta 160f - page 67

    Before making copies or faxing 3 bizhub 160f 3-17 Symbol list Symbol Description Bypass tray Paper is loaded i n the bypass tray. Custom paper size The paper setting for the bypass tray is a custom paper size. Dialing A fax number is bein g dialed. Ringing The machine is being called. Sending The document is being sen t. Receiving A document is bei ...

  • Konica Minolta 160f - page 68

    3 Before making copies or faxing 3-18 bizhub 160f 3.5 Turning the machine on/off Turning the machine on % Press the n (on) side of the power switch. When the machine is turned on, the [Start] key indicator lights up in or- ange to indicate that the machine is ready to begin printing. 2 Note When the [Start] key indicator lights up in orange, the ma ...

  • Konica Minolta 160f - page 69

    Before making copies or faxing 3 bizhub 160f 3-19 Turning the machine off 7 CAUTION Incorrect handling can cause paper misfeed or l ost of data. % Do not turn off the machine while a print cy cle is being performed, as a paper misfeed will result. Before attempting to turn off the machine, always be sure that the current print cycle ha s been compl ...

  • Konica Minolta 160f - page 70

    3 Before making copies or faxing 3-20 bizhub 160f 3.6 Initial mode When the machine is turned on, the in itial mode screen appears in the dis- play of the control panel. The initial mode screen appears at the beginning of all operations. Factory default settings are: - Number of copies 1 - Image density TEXT Auto - Zoom ratio 100% (full size ) - Pa ...

  • Konica Minolta 160f - page 71

    Before making copies or faxing 3 bizhub 160f 3-21 3.7 Useful functions Panel resetting Press the [Panel reset] key to return all modes and functions (zoom ratio, number of copies, etc.) to their defaults. Al l selected settings are canceled. The [Panel reset] key comes i n handy for canceling all selected settings a t one time. To avoid accidentall ...

  • Konica Minolta 160f - page 72

    3 Before making copies or faxing 3-22 bizhub 160f Energy save mode Instead of turning off the machine, it can be set into a standby state (energy save mode). If the machine is not used for a set length of time , it will automatically enter the energy save mode. The default length of time i s 15 min. To cancel the energy save mode, press any key on ...

  • Konica Minolta 160f - page 73

    Before making copies or faxing 3 bizhub 160f 3-23 3.8 Entering Text When specifying the user name or programmi ng one-touch dial keys with the recipient name, letters, accented characters, nu mbers and symbols can be entere d. Key operation The 10-key pad will be used to enter numbers and letters, symbols. List of characters List of characters avai ...

  • Konica Minolta 160f - page 74

    3 Before making copies or faxing 3-24 bizhub 160f Inputting Example To enter the name “NJ Office” The cursor (_) flashes alternately with the cha racter at its current location. Press the [6] key twice. Press the [5] key once. Press the [0] key once. Press the [6] key 3 times. Press the [3] key 7 times. Press the [4] key 7 times. Press the [2] ...

  • Konica Minolta 160f - page 75

    Before making copies or faxing 3 bizhub 160f 3-25 Correcting text and input precautions: - To erase all entered text, press the [Pane l reset] key. - To delete only part of the entered text, use the [ * ] and [ ) ] key s to move the cursor (_) to the character that you wish to delete, and then press the [No/C] key. - To change an entered character, ...

  • Konica Minolta 160f - page 76

    3 Before making copies or faxing 3-26 bizhub 160f 3.9 Copy paper Paper specifications The following table specifies the type and size of paper to be used with each tray together with its capacity. * Two tray types are available for tray 2. Sel ect the desired tray type at the time of purchase. L: Lengthwise Tray 1 Specifications Paper type • Plai ...

  • Konica Minolta 160f - page 77

    Before making copies or faxing 3 bizhub 160f 3-27 Precautions for loading paper Please adhere to the following precaution s: - Be sure to observe the paper specificati ons (paper type, paper size, and capacity) for each tray, otherwise a paper misfee d could result. - When paper is loaded into the bypas s tray, a message appears, indicat- ing that ...

  • Konica Minolta 160f - page 78

    3 Before making copies or faxing 3-28 bizhub 160f Loading paper While loading paper, be sure to observe the foll owing precautions. Precautions Illustration If the paper is curled, flatten it before loading i t. Do not load so much paper that the top of the stack is high er than t he , mar k or ex ceeds t he spec ified number of sheets. Push the pa ...

  • Konica Minolta 160f - page 79

    Before making copies or faxing 3 bizhub 160f 3-29 2 Note We recommend replenishing the pape r only after all of the paper in the drawer has been used. When loading envelopes, load them with the flap f ac- ing down, as shown in the illustration at the righ t. Before loading envelopes, press them down to make sure that all air is removed, a nd make s ...

  • Konica Minolta 160f - page 80

    3 Before making copies or faxing 3-30 bizhub 160f Loading paper into tray 1 1 Remove the bypass tray. 2 Load the paper into the tray so that the front side of the paper (the side facing up when the package was un- wrapped) faces up. 3 Slide the paper guides against the edges of the paper. If legal-size pa- per is installed, open the door of tray 1. ...

  • Konica Minolta 160f - page 81

    Before making copies or faxing 3 bizhub 160f 3-31 Loading paper into the bypass tray 1 Load the paper so that the front side of the paper (the side fac ing up when the package was unwrapped) faces up. 2 Slide the paper guides against the edges of the paper. ! Deta il When paper is loaded into the bypas s tray, the paper size and type must be specif ...

  • Konica Minolta 160f - page 82

    3 Before making copies or faxing 3-32 bizhub 160f Loading paper into tray 2 (option) 1 Pull out the drawer for tray 2. 2 Remove the drawer cover, and then press down on the paper-lifting plate until it locks into place. 3 Load the paper into the drawer so that the front side of the paper (the side facing up when the package was unwrapped) faces up. ...

  • Konica Minolta 160f - page 83

    Before making copies or faxing 3 bizhub 160f 3-33 3.10 Loading originals Two ways of loading the original The original may be loaded in the automati c document feeder or placed di- rectly on the original glas s. Choose the appropriate method ac cording to the type of the original. Specific types of originals L: Lengthwise Loading originals in the a ...

  • Konica Minolta 160f - page 84

    3 Before making copies or faxing 3-34 bizhub 160f Loading originals into the automatic document feeder 7 CAUTION Paper jam in fact of overloaded automatic document feeder. % A maximum of 50 document pages can be loaded. % Do not load so many pages that the top of the stack i s higher than the , mark. % Be sure to adjust the document guides so tha t ...

  • Konica Minolta 160f - page 85

    Before making copies or faxing 3 bizhub 160f 3-35 Placing the original on the original gl ass The method for positioning the origi nal differs depending on the type of orig- inal being used. Care should be taken when positioni ng the following types of originals. - An original of a non-standard size: The document size cannot be detected automatical ...

  • Konica Minolta 160f - page 86

    3 Before making copies or faxing 3-36 bizhub 160f Positioning a sheet original Use the following procedure to position plain paper or an original that is not suitable for use in the automatic document feeder. 1 Raise the automatic document feed- er. 2 Place the original face down on the original glass. 3 Position the original on the original glass ...

  • Konica Minolta 160f - page 87

    Before making copies or faxing 3 bizhub 160f 3-37 Positioning highly transparent originals When making a copy from OHP transparencies, translucent paper, or other highly transparent original, position the origina l as detailed below. 1 Raise the automatic document feed- er. 2 Place the original face down on the original glass. 3 Position the origin ...

  • Konica Minolta 160f - page 88

    3 Before making copies or faxing 3-38 bizhub 160f Positioning books When copying an open book or magazine, pos ition the original as detailed below. 1 Raise the automatic document feeder. 7 WARNING Broken original glass by incorr ect handling. % Do not place books weighing more than 2 k g on the original glass. In addition, do not press down extrem ...

  • Konica Minolta 160f - page 89

    Before making copies or faxing 3 bizhub 160f 3-39 5 Specify the desired copy settings. For details, refer to “Making a basic copy” on page 4-3 and “B asic Fax- ing” on page 5-15. 6 Press the [Start] key. This will start the print cycle. ...

  • Konica Minolta 160f - page 90

    3 Before making copies or faxing 3-40 bizhub 160f 3.11 Checking the machine status The total number of pages copied and scanned sinc e this machine was in- stalled can be checked. Menu Item Descri ption TOTAL PAGE TOTAL COUNT Displays the total number of pages copie d since this machine was in stalled. TOTAL SCAN Displays the total number of pages ...

  • Konica Minolta 160f - page 91

    Before making copies or faxing 3 bizhub 160f 3-41 3.11.1 TOTAL PAGE Checking a TOTAL PAGE count 1 Press the [Status] key. 2 Press the [Yes] key. 3 Press the [ + ] and [ , ] keys to che ck a total page count. – TOTAL COUNT – TOTAL SC AN – TX PAGES – RX PAGES Status Ye s ...

  • Konica Minolta 160f - page 92

    3 Before making copies or faxing 3-42 bizhub 160f 3.11.2 TX /RX RESULT Checking the TX/RX RESULT 1 Press the [Status] key 2 times . 2 Press the [Yes] key. 3 Press the [ ] and [ ] keys to display the desired transmission results to check them. ? What does TX and RX indicate? TX indicates sent faxes. RX indicates received ones. ? Do you want to retur ...

  • Konica Minolta 160f - page 93

    Before making copies or faxing 3 bizhub 160f 3-43 3.11.3 PRINT REPORT Printing a PRINT REP ORT 1 Press the [Status] key 3 ti mes. 2 Press the [Yes] key. 3 Press the [ ] and [ ] keys to select the report/list that you wish to print. – CONFIGURATIO N PAGE 4 Press the [Yes] key. After the specified report/list is print- ed, the main screen appears a ...

  • Konica Minolta 160f - page 94

    3 Before making copies or faxing 3-44 bizhub 160f TX Result report The document number, recipient name, date sent, s tarting time of transmis- sion, number of document pages, tim e required, mode, and transmission re- sult are printed. RX Result report The document number, caller name, date received, starting time of recep- tion, number of pages re ...

  • Konica Minolta 160f - page 95

    Before making copies or faxing 3 bizhub 160f 3-45 Activity report The operation number, document number, date of operation, starting time of transmission/reception, type of operation (transmis sion or reception), recip- ient/caller name, number of pages sent/receive d, mode, and transmission/ reception result are printed. The machine can a lso be s ...

  • Konica Minolta 160f - page 96

    3 Before making copies or faxing 3-46 bizhub 160f One-touch list The recipients programmed in the one-touch dial keys a re printed in numer- ical order of the keys. Speed dial list The recipients programmed for the speed dial n umbers are printed in numer- ical order. Key setting list The group dialing and program dialing settings speci fied for on ...

  • Konica Minolta 160f - page 97

    Before making copies or faxing 3 bizhub 160f 3-47 3.12 Print area Any part of the image within the area in dicated below is not copied. A margin 4 mm (at full size) from the leading edge of the paper (A) A margin 4 mm (at full size) from the trailing edge of the paper (B) A margin 4 mm (at full size) on both sides of the paper (C) For details on us ...

  • Konica Minolta 160f - page 98

    3 Before making copies or faxing 3-48 bizhub 160f ...

  • Konica Minolta 160f - page 99

    4 Making copies ...

  • Konica Minolta 160f - page 100

    ...

  • Konica Minolta 160f - page 101

    Making copies 4 bizhub 160f 4-3 4 Making copies 4.1 Basic copies The following procedure describes how to place an original and make a basic copy of it. Making a basic copy 1 Position the original. For details, refer to “Loading origi- nals” on page 3-33. 2 Select the paper tray. For details, refer to “Paper selection” on page 4-5. 3 Specif ...

  • Konica Minolta 160f - page 102

    4 Making copies 4-4 bizhub 160f 4 Specify the image density. For details, refer to “Image Density” on page 4-12. 5 Using the 10-key pad, enter the number of copies to be made. Any number from 1 to 99 can be e ntered. 6 Press the [Start] key. This will start the copy cycle. – To stop the copy cycle in mid-op- eration, press the [Stop] key. – ...

  • Konica Minolta 160f - page 103

    Making copies 4 bizhub 160f 4-5 4.2 Paper selection The tray containing the paper you want to use ca n be manually selected. if an optional paper feed unit is installed When the desired paper is loaded into the bypass tray and the paper size and type are specified, paper l oaded into the bypass tray i s given priority during feeding. Selecting the ...

  • Konica Minolta 160f - page 104

    4 Making copies 4-6 bizhub 160f Specifying the size and type of manually fed paper 1 Position the original. For details, refer to “Loading originals” on page 3- 33. 2 Load paper into the bypass tray. For details, refer to “Loading paper into the bypass tray” on page 3-31. ? How many paper can be loaded into the bypass tray % The bypass tray ...

  • Konica Minolta 160f - page 105

    Making copies 4 bizhub 160f 4-7 6 Press the [ * ] and [ ) ] keys to select a standard size of paper that is loaded. or press the [ , ] key to enter a custom size of paper that is loaded. ? Do you want to use a standard paper size (A5, B5, A4 . ..)? % Select a standard paper size. % Continue with step 10. ? Do you want to enter a custom paper size? ...

  • Konica Minolta 160f - page 106

    4 Making copies 4-8 bizhub 160f 7 Using the 10-key pad, enter the width (X) of the paper. The width can range from 90 mm to 216 mm. ? Do you want to clea r the entered value? % Press the [No/C] key 8 Press the [Yes] key. 90-216 Tray 1 Bypass tr ay Y X Y X Ye s ...

  • Konica Minolta 160f - page 107

    Making copies 4 bizhub 160f 4-9 9 Using the 10-key pad, enter the length (Y) of the paper. The length can range from 140 mm to 356 mm. 10 Press the [Yes] key. 11 Specify the desired copy settings. For details, refer to “Making a basic copy” on page 4-3. 12 Using the 10-key pad, enter the number of copies to be made. ? Do you want to change the ...

  • Konica Minolta 160f - page 108

    4 Making copies 4-10 bizhub 160f 4.3 Zoom rati o By specifying a zoom ratio, the copy can be enlarged or reduced. Zoom ratio settings Zoom ratio settings Descr iption Fixed ratios The followi ng optimum zoom ratios are available f or making cop- ies from commonly used original sizes to standard paper sizes: •× 0 . 2 5 •× 0 . 5 0 • × 0.70 ( ...

  • Konica Minolta 160f - page 109

    Making copies 4 bizhub 160f 4-11 Specifying the zoom ratio 1 Position the original. For details, refer to “Loading originals” on page 3- 33. 2 Press the [Zoom] key until the de- sired fixed ratio is selected. Each press of the [Zoom] key changes the setting. ? Do you want to specify a zoom ratio other than a fixed ratio. % Press the [ , ] and [ ...

  • Konica Minolta 160f - page 110

    4 Making copies 4-12 bizhub 160f 4.4 Image Density Image density setting The image density setting can be adjusted in two broad modes, “Text” and “Photo”: - Text mode – The image density can be adjusted either au tomatically (Auto) or manu- ally in nine steps. – The image density is adjusted automatic ally according to the original from ...

  • Konica Minolta 160f - page 111

    Making copies 4 bizhub 160f 4-13 Specifiying the image density 1 Position the original. For details, refer to “Loading originals” on page 3- 33. 2 Press the [Auto/Photo] key on the control panel to select the desired mode. Each press of the [Auto/Pho- to] key changes the setting as shown at the right. – If text mode is selected, TEXT is displ ...

  • Konica Minolta 160f - page 112

    4 Making copies 4-14 bizhub 160f 4.5 2in1 copi es 2in1 copy function Two sheets of single-sided documents can be copied onto one double-sided sheet. The optional automatic document feeder is requ ired. Specifying settings for 2in1 copies 1 Position the original as shown in the illustration at the right. 2 Press the [2in1] key, and then chec k that ...

  • Konica Minolta 160f - page 113

    Making copies 4 bizhub 160f 4-15 4.6 Finishing copi es Finishing modes When printing two or more sets, each set can be printed (sorted) i n order. In order to sort the printed pages, the automatic document feeder is required. Finishing modes Non-sort The copies are stacked on top of each other as they ar e made. Sort Documents containing multi ple ...

  • Konica Minolta 160f - page 114

    4 Making copies 4-16 bizhub 160f Specifying sorting 1 Load the originals in the automatic document feede r. 2 Press the [Sort] key, and then check that the indicator lights up. If the sort indicator is not lit, the non-sort set- ting is selected. 3 Using the 10-key pad, enter the number of copies to be made. 4 Specify the desired copy settings. For ...

  • Konica Minolta 160f - page 115

    5 Faxing ...

  • Konica Minolta 160f - page 116

    ...

  • Konica Minolta 160f - page 117

    Faxing 5 bizhub 160f 5-3 5F a x i n g This machine is a G3 fax. Faxes can only be sent or received with this ma- chine if the recipient’s or sender’s machi ne complies with the G3 standard. 5.1 Dialing The recipient’s fax number can be dialed using any of the seven different di- aling methods described below. The procedures described below as ...

  • Konica Minolta 160f - page 118

    5 Faxing 5-4 bizhub 160f % If the machine is connected to a PB X line and the outside line ac- cess number has been specified in the c ommunication settings (p. 7-73), enter “#” to dial the outside line access number automat- ically. 5 Press the [Start] key to begin scann ing and sending the fax. ...

  • Konica Minolta 160f - page 119

    Faxing 5 bizhub 160f 5-5 To fax using one-touch dialing If one-touch dial keys have already been programmed with fax numbers, the fax number of a recipient can be specified by pressing just the corresponding one-touch dial key. 1 Press the [Fax] key to enter fax mode. 2 Load the document into the automatic documen t feeder. 3 If necessary, change t ...

  • Konica Minolta 160f - page 120

    5 Faxing 5-6 bizhub 160f To fax using speed dialing If speed dial numbers have already been programme d, the fax number of a recipient can be specified quickly by entering the corresponding speed dial number. 1 Press the [Fax] key to enter fax mode. 2 Load the document into the automatic document feeder. 3 If necessary, change the resolution settin ...

  • Konica Minolta 160f - page 121

    Faxing 5 bizhub 160f 5-7 To fax using group dialing If one-touch dial keys have a lready been programmed with a group of fax numbers, the fax numbers of all recipients i n the group can be specified by pressing just the corresponding one-touch dial key. 1 Press the [Fax] key to enter fax mode. 2 Load the document into the automatic documen t feeder ...

  • Konica Minolta 160f - page 122

    5 Faxing 5-8 bizhub 160f To fax using chain dialing Faxes can be sent to recipients that are specified using any combination of one-touch dial keys, speed dial numbers, direct input using the 1 0-key pad, and the [Redial] key. As an example, the following procedure describes how to specify recipi ents using one-touch keys, then usin g the 10-key pa ...

  • Konica Minolta 160f - page 123

    Faxing 5 bizhub 160f 5-9 To fax using program dialing If one-touch dial keys have already been programmed with fax numbers and a transmission/reception function (such as timer transmission or polling re- ception), that function can be carried out by pressing just the corresponding one-touch dial key. 1 Press the [Fax] key to enter Fax mode. 2 Load ...

  • Konica Minolta 160f - page 124

    5 Faxing 5-10 bizhub 160f To fax using the phone book The phone book contains all programmed one-touch dialing and s peed dial- ing numbers, allowing you to search for and select the recipient that you wi sh to send the fax to. 1 Press the [Fax] key to enter fax mode. 2 Load the document into the automatic document feeder. 3 If necessary, change th ...

  • Konica Minolta 160f - page 125

    Faxing 5 bizhub 160f 5-11 To search the phone book 1 Press the [Phone book] key . 2 Using the [ * ] and [ ) ] keys, select SEARCH , and then press the [Yes] key. A screen appears, allowing you to enter the text to be searched for. 3 Using the 10-key pad, enter the first few characters of the name pro- grammed for the desired recipient. – Enter th ...

  • Konica Minolta 160f - page 126

    5 Faxing 5-12 bizhub 160f 8 Press the [Start] key to begin scan- ning and sending the fax. ...

  • Konica Minolta 160f - page 127

    Faxing 5 bizhub 160f 5-13 To redial the last recipient call ed 1 Press the [Fax] key to enter fax mode. 2 Load the document into the automatic documen t feeder. 3 If necessary, change the resolution setti ng (p. 5-14). 4 Press the [Redial/Paus e] key. The fax number of the last recipient called is displayed. 5 Press the [Start] key to begin sc an- ...

  • Konica Minolta 160f - page 128

    5 Faxing 5-14 bizhub 160f 5.2 Transmission settings Adjusting the fax resolution Selecting one of the following resolutions to match the type of document to be faxed (documents containing a lot of small prin t, detailed illustrations or photos) will produce a sharper result. To specify the resolution 1 Load the document into the automatic document ...

  • Konica Minolta 160f - page 129

    Faxing 5 bizhub 160f 5-15 5.3 Basic Faxing To fax using the automatic document feeder 1 Press the [Fax] key to enter fax mode. 2 Load the document face up into the automatic document feeder. 3 Adjust the document guide pla tes to fit the size of the document. 4 If necessary, change the resolution settin g (p. 5- 14). 5 Using the 10-key pad, enter t ...

  • Konica Minolta 160f - page 130

    5 Faxing 5-16 bizhub 160f 2 Note About 224 A4-size documen t pages can be scanned and stored in the memory at one time. If the optional expansion m emory (32 MB Memory for Fax) is installed, as many as 1024 document pages can be stored. 2 Reminder While faxing, if the recipient’s fax machine is busy or does not ans wer or if, for any other reason ...

  • Konica Minolta 160f - page 131

    Faxing 5 bizhub 160f 5-17 To fax documents positioned on the original glass 1 Press the [Fax] key to enter fax mode. 2 Lift open the automatic document feeder. 3 Position the document to be faxed face down on the original glass. 4 Align the document on the scales above and to the left of the original glass. 5 If necessary, change the resolution set ...

  • Konica Minolta 160f - page 132

    5 Faxing 5-18 bizhub 160f If the memory becomes full whil e scanning fax documents If the memory becomes full while scanni ng a document for memory trans- mission, only the pages that have been scanned are sent. With a queued transmission (a fax transm ission requested while another fax transmission job is being performed) or timer transmi ssion, i ...

  • Konica Minolta 160f - page 133

    Faxing 5 bizhub 160f 5-19 5.4 Checking transmission results The transmission result information for a maxi mum of 60 sent and received documents is saved. To check the transmission result 1 Press the [Status] key. 2 Press the [ , ] key. 3 Press the [Yes] key. 4 Using the [ + ] and [ , ] keys, display the desired transmission results to check them. ...

  • Konica Minolta 160f - page 134

    5 Faxing 5-20 bizhub 160f ...

  • Konica Minolta 160f - page 135

    6 Fax transmission/ Reception methods ...

  • Konica Minolta 160f - page 136

    ...

  • Konica Minolta 160f - page 137

    Fax transmission/Reception methods 6 bizhub 160f 6-3 6 Fax transmission/Reception methods 6.1 Transmission methods 6.1.1 Memory transmission With memory transmission, the doc ument is scanned, then stored in the memory for transmission (queued transmiss ion). Memory transmission is selected a s the default transmission mode. ! Deta il For details o ...

  • Konica Minolta 160f - page 138

    6 Fax transmission/Reception methods 6-4 bizhub 160f 6 Using the 10-key pad, enter the fax number of the recipient. – The fax number of a previously programmed recipient can also be specified. For details, refer to “Dialing” on page 5-3. 7 Press the [Start] key to begin scann ing and sending the fax. Once transmission is finished, a beep is s ...

  • Konica Minolta 160f - page 139

    Fax transmission/Reception methods 6 bizhub 160f 6-5 6.1.2 Direct transmission If the memory TX lamp is not li t, the direct transmission is selecte d. One page of the document at a time can be scanned, a ccording to the transmission status. This ensures that even docum ents with many pages can be sent. 2 Note When faxing using direct transmis sion ...

  • Konica Minolta 160f - page 140

    6 Fax transmission/Reception methods 6-6 bizhub 160f 6.1.3 Manual transmission If the machine is connected to a telephone and the same line is used for phoning and faxing, the document can simply be sent after talking with the recipient over the phone. This is useful, for example, if you wis h to tell the recipient that you are send- ing a fax. 2 N ...

  • Konica Minolta 160f - page 141

    Fax transmission/Reception methods 6 bizhub 160f 6-7 6 Press the [Start] key to begin sc an- ning and sending the fax. 7 Replace the telephone receiver. ? Do you want to stop the transmission? % Press the [Stop] key. 2 Note If the [Speaker] key is pressed instead of pic king up the telephone receiv- er, the speaker can be used for manual transmiss ...

  • Konica Minolta 160f - page 142

    6 Fax transmission/Reception methods 6-8 bizhub 160f 6.1.4 Batch transmission Multiple documents can be stored in the memory and faxed together at a specified time. In order to use this function, the correspon ding utility mode function must first be used to program a one-touch dia l key with the batch transmission settings (transmission ti me) (p. ...

  • Konica Minolta 160f - page 143

    Fax transmission/Reception methods 6 bizhub 160f 6-9 6.1.5 Broadcast transmission The same document can be sent to multi ple recipients at one time. A maximum of 231 recipients ca n be specified for the same transmission. The recipients can be specified by using the one-tou ch dial keys, the speed dial numbers or group dialing, by selecting from th ...

  • Konica Minolta 160f - page 144

    6 Fax transmission/Reception methods 6-10 bizhub 160f 5 Specify the fax number of the recipient. Repeat the appropriate operations described below until all recipients have been specified. ? Do you want to use one-touch dial k eys? % Press the one-touch dia l key pro- grammed with the desired fax number. % Press the [Yes] key, and then specify the ...

  • Konica Minolta 160f - page 145

    Fax transmission/Reception methods 6 bizhub 160f 6-11 6 Press the [Start] key. A message appears, allowing you to s elect whether or not to check the recipients. 7 To check the recipients, press the [Yes] key. If you do not wish to check the recipients, continue with step 9. The recipients specified in step 5 are displayed in the order that they we ...

  • Konica Minolta 160f - page 146

    6 Fax transmission/Reception methods 6-12 bizhub 160f 6.1.6 Timer transmission A document can be scanned and stored in the memory to be sent at a spec- ified time. This function is convenient for s ending documents with a large number of pages at discounted calling times. 2 Note The time is set for a 24-hour period. If the machine is not programmed ...

  • Konica Minolta 160f - page 147

    Fax transmission/Reception methods 6 bizhub 160f 6-13 5 Using the 10-key pad, enter the de- sired transmission time, and then press the [Yes] key. ? Do you want to correct the time? % Press the [No/C] key, and the n enter the correct time. 6 Specify the fax number of the recipi- ent. For details, refer to “Dialing” on page 5-3. 7 Press the [Sta ...

  • Konica Minolta 160f - page 148

    6 Fax transmission/Reception methods 6-14 bizhub 160f 6.1.7 Mailbox transmission The fax can be sent to a recipient’s mailbox. This is perfect for sending an important document to a spe cific person. 2 Note Mailbox transmission is compatible with F code transmission. Machines compatible with F codes can be specified as recipients for mailbox tran ...

  • Konica Minolta 160f - page 149

    Fax transmission/Reception methods 6 bizhub 160f 6-15 6 Using the 10-key pa d, enter the mail- box ID of the recipient. – Enter the mailbox ID (SUB) (20 digits or less ) reg ister ed for the recipient. – If the recipient is specified using a on e-touch dial key or a speed dial number also programmed with a SUB, the S UB is displayed as the mail ...

  • Konica Minolta 160f - page 150

    6 Fax transmission/Reception methods 6-16 bizhub 160f 6.1.8 Relay initiation transmission Documents can be sent from this machi ne (transmitting station) to another fax machine (acting as a relay station), wh ich then sends the documents to multiple recipients (receiving stations). By relayin g the documents through a fax machine closer to the remo ...

  • Konica Minolta 160f - page 151

    Fax transmission/Reception methods 6 bizhub 160f 6-17 5 Specify the relay station, and then press the [Yes] key. For detai ls, refer to “Dialing” on page 5-3. A screen appears, allowing you to specify the relay box ID. 6 Using the 10-key pad, ente r the relay box ID. – Enter the mailbox ID (SUB) (20 digits or less ) reg ister ed for the recip ...

  • Konica Minolta 160f - page 152

    6 Fax transmission/Reception methods 6-18 bizhub 160f 6.1.9 Polling Transmission Documents scanned and sav ed in the memory can be retrieved by the recip- ient. 2 Note Polling transmission is compatibl e with F code transmission. A maximum of 30 polling transmiss ions can be programmed. If the memory is full, polling transmissi on cannot be set. Wi ...

  • Konica Minolta 160f - page 153

    Fax transmission/Reception methods 6 bizhub 160f 6-19 6 Using the 10-key pad, enter the 4- digit polling ID, and then press the [Yes] key. – If you do not wish to set a polling ID, skip to step 8. – The polling ID can be set to any nu mber between 0000 and 9999. – If there is only one polling transmiss ion document, it is not neces- sary to s ...

  • Konica Minolta 160f - page 154

    6 Fax transmission/Reception methods 6-20 bizhub 160f 4 Using the 10-key pad, enter the poll- ing ID, and then press the [Yes] k ey. 5 Press the [No/C] key to delete from the memory the document set for polling transmission. ? Do you want to keep the polling transmission setting? % Press the [Yes] key. 6 Press the [No/C] key twice to return to the ...

  • Konica Minolta 160f - page 155

    Fax transmission/Reception methods 6 bizhub 160f 6-21 6.1.10 Canceling (Deleting) a Doc ument Queued in the Memory for Transmission Of the documents stored in the me mory and waiting to be sent, a specific document can be selected and deleted. To cancel a queued document 1 Press the [Function] key. 2 Press the [8] key from the 10- key pad. or Press ...

  • Konica Minolta 160f - page 156

    6 Fax transmission/Reception methods 6-22 bizhub 160f 4 Press the [Yes] key to delete the dis- played job. FUNCTION menu appears in the dis- play. 5 To delete another queued job, repeat steps 2 and 4. 6 If you are finished deleting jobs, press the [N o/C] key to return to the main screen. ...

  • Konica Minolta 160f - page 157

    Fax transmission/Reception methods 6 bizhub 160f 6-23 6.2 Reception methods 6.2.1 Manual reception This machine normally receive s faxes automatically. Howev er, if a telephone is connected and the same line is used for phoning and faxing, the document can simply be received after talking w ith the caller over the phone. 2 Note Manual reception is ...

  • Konica Minolta 160f - page 158

    6 Fax transmission/Reception methods 6-24 bizhub 160f 6.2.3 Mailbox reception If mailbox numbers and F codes (m ailbox IDs and passwords) hav e already been programmed on this machine, this function can be used to receive only those faxes with an identical mailbox ID and password specified by the call- er. Since the received fax can only be retriev ...

  • Konica Minolta 160f - page 159

    Fax transmission/Reception methods 6 bizhub 160f 6-25 6.2.4 Polling Reception Using polling reception, documents s et up in other fax machines can be re- ceived. 2 Note Polling reception is compatible wi th F code transmission. To receive a fax using polling reception 1 Press the [Function] key. 2 Press the [6] key from the 10- key pad. or Press th ...

  • Konica Minolta 160f - page 160

    6 Fax transmission/Reception methods 6-26 bizhub 160f 6 Using the 10-key pad, enter the password (20 digits or less), and then press the [Yes] key. 7 To specify multiple fax numbers, re- peat steps 3 through 6. – If you do not wish to specify other fax numbers, continue with step 8. 8 Press the [Start] key. A message appears, allowing you to sele ...

  • Konica Minolta 160f - page 161

    Fax transmission/Reception methods 6 bizhub 160f 6-27 6.3 Using F codes This machine is compatible F code tran smissions. F codes are mailbox functions, such as SUB (sub-a ddresses), SEP (selective polling), SID and PW D (passwords), regulated by the G3 standards of th e ITU-T (International Telecommunic ation Union). Mailbox transmission and recep ...

  • Konica Minolta 160f - page 162

    6 Fax transmission/Reception methods 6-28 bizhub 160f 6.3.1 Using Mailboxes Specifying mailboxes Mailboxes can be used if they are set up us ing the corresponding Utility mode function. For details, refer to “Mailbox reception” on page 6-24. F code mailbox transmission/reception A maximum of 5 mailboxes can be set up. Since a mailbox ID is requ ...

  • Konica Minolta 160f - page 163

    Fax transmission/Reception methods 6 bizhub 160f 6-29 6.3.2 Specifying F codes When sending faxes F codes can be specified when the 10-key pad is being used to enter the fax number of a recipient while sending a fax. 1 Using the 10-key pad, enter the fax number of the recipient. 2 Press the [ , ] key, and then use the 10-key pad to enter the SUB . ...

  • Konica Minolta 160f - page 164

    6 Fax transmission/Reception methods 6-30 bizhub 160f ...

  • Konica Minolta 160f - page 165

    7 Using the utility mode ...

  • Konica Minolta 160f - page 166

    ...

  • Konica Minolta 160f - page 167

    Using the utility mode 7 bizhub 160f 7-3 7 Using the utility mode There are fifteen menus in the utility mode . No. Name Description 1 MACHINE SETTING Used to specify settings for the machine’s operating environment. 2 PAPER SOUR CE SETUP Used to specify the size and type of paper loaded in tray1. In ad- dition, auto tray switching ca n be enable ...

  • Konica Minolta 160f - page 168

    7 Using the utility mode 7-4 bizhub 160f 7.1 Machine settings From the MACHINE SETTING me nu, various settings for the machine’s op- erating environment can be specified. R efer to the following table for details on each function. No. Name Description 1 AUTO PANEL RESET Whether the au to panel reset function is di sable or the time (0.5 min, 1 mi ...

  • Konica Minolta 160f - page 169

    Using the utility mode 7 bizhub 160f 7-5 0 INITIAL M ODE This fu nction can be used to set the mode (Copy mode or Fax mode) that the machine starts up in or returns to after the Control Panel is reset. • Default setting: COPY. No. Name Description ...

  • Konica Minolta 160f - page 170

    7 Using the utility mode 7-6 bizhub 160f Selecting the MACHINE SETTING menu 1 Press the [Utility] key. MACHINE SETTING a ppears. 2 From the 10-key pad, press the key [0] to [9] for the machine setting func- tion that you wish to set. The machine setting functions are as follows: 1 AUTO PANE L RESET 2 ENERG Y SAVE MODE 3 DENSITY (ADF) 4 DENSITY (BOO ...

  • Konica Minolta 160f - page 171

    Using the utility mode 7 bizhub 160f 7-7 Specifying AUTO PANEL R ESET 1 Select AUTO PA NEL RESET in the MACHINE SETTING m enu. For details, refer to page 7-6. 2 Press the [ * ] and [ ) ] keys to select either ON or OFF , and then press the [Yes] key. ? Do you want to disable the panel reset function? % Select OFF . The auto panel reset function is ...

  • Konica Minolta 160f - page 172

    7 Using the utility mode 7-8 bizhub 160f Specifying ENERGY SAVE M ODE 1 Select ENERG Y SAVE MODE in the MACHINE SETTING menu. For details, refer to page 7-6. 2 Use the 10-key pad to specify the desired length of time until the copier enters energy save mode. The timer can be set between 1 min and 240 min. ? Do you want to clea r the entered value? ...

  • Konica Minolta 160f - page 173

    Using the utility mode 7 bizhub 160f 7-9 Specifying DENSITY (BOOK) 1 Select DENSITY (B OOK) in the MA- CHINE SETTING menu. For details, refer to page 7-6. 2 Press the [ * ] and [ ) ] keys to select either MODE 1 or MODE 2 . 3 Press the [Yes] key. Specifying PRINT DENSITY 1 Select PRINT DENSI TY in the MA- CHINE SETTING menu. For details, refer to p ...

  • Konica Minolta 160f - page 174

    7 Using the utility mode 7-10 bizhub 160f Specifying LCD CONTRAST 1 Select LCD CONTRAS T in the MA- CHINE SETTING menu. For details, refer to page 7-6. 2 Press the [ * ] and [ ) ] keys to select one of the four display contras t levels between LIGHT and DARK . 3 Press the [Yes] key. Specifying LANGUAGE 1 Select L ANGUAGE in t he MACHINE SETTING men ...

  • Konica Minolta 160f - page 175

    Using the utility mode 7 bizhub 160f 7-11 Specifying LAMP OFF TIME 1 Select LAMP OFF TIME in the MA- CHINE SETTING menu. For details, refer to page 7-6. 2 Press the [ * ] and [ ) ] keys to select either MODE 1 or MODE 2 . 3 Press the [Yes] key. Specifying BUZZER VOLU ME 1 Select BUZZER VOL UME in the MA- CHINE SETTING menu. For details, refer to pa ...

  • Konica Minolta 160f - page 176

    7 Using the utility mode 7-12 bizhub 160f Specifying INITIAL MODE 1 Select INITIAL MODE in the MA- CHINE SETTING menu. For details, refer to page 7-6. 2 Press the [ * ] and [ ) ] keys to select either COPY or FAX . 3 Press the [Yes] key. ...

  • Konica Minolta 160f - page 177

    Using the utility mode 7 bizhub 160f 7-13 7.2 Paper source settings From the PAPER S OURCE SETUP menu, the various settings for each paper tray can be specified. Selecting the PAPER SOU RCE SETUP menu 1 Press the [Utility] key twi ce. PAPER SOURCE SETUP ap pears. 2 From the 10-key pad, press the key [1] or [2] for the paper source setup function th ...

  • Konica Minolta 160f - page 178

    7 Using the utility mode 7-14 bizhub 160f Specifying TRAY1 PAPER 1 Select TR AY1 PAPER in the PAPE R SOURCE SETUP menu. For details refer to page 7-13. 2 Press the [ * ] and [ ) ] keys until the type of paper loaded is selected. ? Do you want to copy on OHP transparencies? % The only paper sizes that can be loaded are A4 v (Lengthwise) and Letter v ...

  • Konica Minolta 160f - page 179

    Using the utility mode 7 bizhub 160f 7-15 5 Using the 10-key pad, enter the width (X) of the loaded paper. The paper width can range from 90 mm to 216 mm. ? Do you want to clear the entered value? % Press the [No/C] key. 6 Press the [Yes] key. 7 Using the 10-key pad, enter the length (Y) of the loaded paper. The paper width can range from 140 mm to ...

  • Konica Minolta 160f - page 180

    7 Using the utility mode 7-16 bizhub 160f Specifying TRAY SETTING A tray can be selected only if the optional paper feed cassette is installed. 1 Select TRAY SE TTING in the PAPER SOURCE SETUP menu. For details refer to page 7-13. 2 Press the [ + ] and [ , ] key to select a tray. 3 Press the [Yes] key. 4 Press the [ * ] and [ ) ] keys to select eit ...

  • Konica Minolta 160f - page 181

    Using the utility mode 7 bizhub 160f 7-17 7.3 User manage ment settings From the USER MAN AGEMENT menu, the various functions whi ch must be specified after the drum cartridge is replaced are avai lable. ! Deta il For details, refer to “Replacing the drum cartridge” on page 8-12. Selecting the USER MANA GEMENT menu 1 Press the [Utility] three t ...

  • Konica Minolta 160f - page 182

    7 Using the utility mode 7-18 bizhub 160f 7.4 Admin. management settings From the ADMIN. MANAGEMEN T menu, various functions for controlling the use of the machine can be set. In order to set an A DMIN. MANAGEMENT function, the administrator access number must be entered. 2 Note The registering and setup of the a dministrator access number should b ...

  • Konica Minolta 160f - page 183

    Using the utility mode 7 bizhub 160f 7-19 Selecting the ADMIN. MA NAGEMENT menu 1 Press the [Utility] key four tim es. ADMIN. MANA GEMENT appears. 2 Press the [Yes] key. 3 From the 10-key pad, press the key [1] for the ADMIN. MA NAGEMEN T function that you wish to set. The admin. management functions are as follows: 1 REMOTE MONITOR 4 Using the 10- ...

  • Konica Minolta 160f - page 184

    7 Using the utility mode 7-20 bizhub 160f Specifying REMOTE MONITOR 1 Select REMOTE MONIT OR in the ADMIN. MANAGEMEN T menu. For details refer to page 7-17. 2 Press the [ * ] and [ ) ] keys to select either LIMITED or FULL or OFF . 3 Press the [Yes] key. –I f LIMITED or OFF was selected, the ADMIN.MAN AGEMENT menu appears again. –I f FULL was s ...

  • Konica Minolta 160f - page 185

    Using the utility mode 7 bizhub 160f 7-21 7.5 Copy settings When the machine is turned on or the [Panel reset] key is pressed, the ma- chine is automatically reset to its i nitial mode. By changing the default set- tings, you can change the initial m ode. Refer to the following table for the default settings for each function. No. Name Description ...

  • Konica Minolta 160f - page 186

    7 Using the utility mode 7-22 bizhub 160f Selecting the COPY SETTING menu 1 Press the [Utility] key five tim es. COPY SETTING appears. 2 From the 10-key pad, press the key [1] to [6] for the copy setting function that you wish to set. The copy setting functions are as fol- lows: 1 PAPER PRIO RITY 2 DENSITY PRIO RITY 3 DENSITY LEVEL (A) 4 DENSITY LE ...

  • Konica Minolta 160f - page 187

    Using the utility mode 7 bizhub 160f 7-23 Specifying DENSITY PRIORITY 1 Select DENSITY PRI ORITY in the COPY SETTING menu. For details refer to page 7-22. 2 Press the [ * ] and [ ) ] keys to select either AUTO , MANUAL or PHOTO . 3 Press the [Yes] key. Specifying DENSITY LEVEL (A) 1 Select DENSITY LEVEL (A ) in the COPY SETTING menu. For details re ...

  • Konica Minolta 160f - page 188

    7 Using the utility mode 7-24 bizhub 160f Specifying DENSITY LEVEL (M) 1 Select DENSITY LEVE L (M) in the COPY SETTING men u. For details refer to page 7-22. 2 Press the [ * ] and [ ) ] keys to select one of the nine print density levels between LIGHT and DARK . 3 Press the [Yes] key. Specifying OUTPUT PRIORITY 1 Select OUTPUT PRIORITY i n the COPY ...

  • Konica Minolta 160f - page 189

    Using the utility mode 7 bizhub 160f 7-25 Specifying RESOLUTION 1 Select RESOLUTION in the COPY SETTING menu. For details refer to page 7-22. 2 Press the [ * ] and [ ) ] keys to select either 600 × 300 or 600 × 600 . 3 Press the [Yes] key. ...

  • Konica Minolta 160f - page 190

    7 Using the utility mode 7-26 bizhub 160f 7.6 Fax registration settings From the FAX REGISTRA TION menu, various settings can be specified in or- der to take advantage of this machine’s many fax functions. No. FAX REGISTRA- TION Characteristic/Description 1 ONE-TOUCH DIAL This function can be used to program one-touch dial keys with fax numbers, ...

  • Konica Minolta 160f - page 191

    Using the utility mode 7 bizhub 160f 7-27 Selecting the FAX REGISTRATION menu 1 Press the [Utility] key s ix times. FAX REGIS TRATIO N appears. 2 From the 10-key pad, press the key [1] through [6] for the fax registration function that you wish to set. The fax registration functions are as follows: 1 ONE-TOUCH D IAL 2 SPEED DIAL 3 GROUP DIA L 4 PRO ...

  • Konica Minolta 160f - page 192

    7 Using the utility mode 7-28 bizhub 160f Specifiying ONE-TOUCH DIAL If the one-touch dial keys are programmed with fax numbers, the recipient can be specified easily and accurately without the need to manually enter the number using the 10-key pad. A maximum of 15 numbers can be programmed. To program a one-touch dial key 1 Select the ONE-TOUCH DI ...

  • Konica Minolta 160f - page 193

    Using the utility mode 7 bizhub 160f 7-29 6 Press the [ , ] key, and then use the 10-key pad to enter the SUB . – A number up to 20 digits lon g can be entered for the SUB. – To enter an SID, continue with s tep 8. – If an SID will not be entered, sk ip to step 9. 7 Press the [ , ] key, and then use the 10-key pad to enter the SID. – A numb ...

  • Konica Minolta 160f - page 194

    7 Using the utility mode 7-30 bizhub 160f To change/delete a programmed one-touch dial key 1 Select the ONE-TOUCH DIAL in the FAX REGISTRATION menu. For details, refer to page 7-27. 2 Press the one-touch dial key that you wish to change or delete. 3 Press the [No/C] key. – If a one-touch dial key pro- grammed with a group of fax numbers or a tran ...

  • Konica Minolta 160f - page 195

    Using the utility mode 7 bizhub 160f 7-31 5 Change the name, fax number, F codes (SUB and SID ) and modem speed as desired. – For details on changing the fax number, refer to “Entering Text” on page 3-23. – For details on changing the F codes (SU B and SID) or modem speed, refer to p. 7-28. 6 When you are finished makin g changes, press the ...

  • Konica Minolta 160f - page 196

    7 Using the utility mode 7-32 bizhub 160f Specifying SPEED DIAL If speed dial numbers are programmed with fax numbers, th e recipient can be specified easily and accurately with out the need to manually enter the number using the 10-key pad. A maximum of 200 fax numbers (001 to 2 00) can be programmed. To program a speed dial number 1 Select the SP ...

  • Konica Minolta 160f - page 197

    Using the utility mode 7 bizhub 160f 7-33 6 Press the [ , ] key, and then use the 10-key pad to enter the SUB . – A number up to 20 digits lon g can be entered for the SUB. – To enter an SID, continue with s tep 8. – If an SID will not be entered, sk ip to step 9. 7 Press the [ , ] key, and then use the 10-key pad to enter the SID. – A numb ...

  • Konica Minolta 160f - page 198

    7 Using the utility mode 7-34 bizhub 160f To change/delete a programmed speed dial number 1 Select the SPEED DIAL in the FAX REGISTRATION men u. For details, refer to page 7-27. 2 Using the 10-key pad, enter the speed dial number that you wish to change or delete. 3 Press the [No/C] key. 4 Using the [ * ] and [ ) ] keys, select ei- ther EDIT or DEL ...

  • Konica Minolta 160f - page 199

    Using the utility mode 7 bizhub 160f 7-35 5 Change the fax number, F codes (SUB and SID), and modem speed as desired. – For details on making changes , refer to “Entering Text” on page 3-23. – For details on changing the F codes (SU B and SID) or modem speed, refer to p. 7-28. 6 When you are finished makin g changes, press the [Yes] key. ? ...

  • Konica Minolta 160f - page 200

    7 Using the utility mode 7-36 bizhub 160f Specifying GROUP DIAL A single one-touch dial key can be programmed with a maximum of 50 dif- ferent fax numbers as one group. Programming a one-touch dial key with a group of fax numbers is convenient wh en documents are frequently sent to a set group of multiple recipients. To program a group of fax numbe ...

  • Konica Minolta 160f - page 201

    Using the utility mode 7 bizhub 160f 7-37 6 When you are finished specify ing re- cipients, press the [Start] key. The settings are registered. To program another group, repeat steps 3 through 7. 7 Press the [No/C] key to finis h pro- gramming. The FAX REGISTRATI ON menu ap- pears again. ...

  • Konica Minolta 160f - page 202

    7 Using the utility mode 7-38 bizhub 160f To change/delete a programmed group of fax numbers 1 Select the GROUP DIAL in the FAX REGISTRATION men u. For details, refer to page 7-27. 2 Press the one-touch dial key that you wish to change or delete. 3 Press the [No/C] key. 4 Using the [ * ] and [ ) ] keys, select ei- ther EDIT or DELETE , and then pre ...

  • Konica Minolta 160f - page 203

    Using the utility mode 7 bizhub 160f 7-39 7 When you are finished makin g changes, press the [Start] key. To change the settings of another group of fax numbers, repeat steps 3 through 8. 8 Press the [No/C] k ey to return to the FAX REGISTRATIO N menu. ...

  • Konica Minolta 160f - page 204

    7 Using the utility mode 7-40 bizhub 160f Specifying PROGRAM DIAL If one-touch dial keys have been programmed with fax numbers and a trans- mission/reception function, that function can be carried out by pressing just the corresponding one-touch dial key. Transmission/reception functions that can be programmed: - Broadcast transmission - Timer tran ...

  • Konica Minolta 160f - page 205

    Using the utility mode 7 bizhub 160f 7-41 6 Press the [No/C] key to finis h pro- gramming. The FAX REGISTRATI ON menu ap- pears again. ...

  • Konica Minolta 160f - page 206

    7 Using the utility mode 7-42 bizhub 160f To change/delete a programmed broadcast transmission 1 Select the PROGRAM D IAL in the FAX REGISTRATION menu. For details, refer to page 7-27. 2 Press the one-touch dial key ([ 12] through [15]) programmed with the broadcast transmission that you wish to change or delete. 3 Press the [No/C] key. 4 Using the ...

  • Konica Minolta 160f - page 207

    Using the utility mode 7 bizhub 160f 7-43 To change/delete a programmed timer tr ansmission 1 Select the PROGRAM DIAL in the FAX REGISTRATIO N menu. For details, refer to page 7-27. 2 Press the one-touch dial ke y ([12] through [15]) programmed with the timer transmission that you wish to change or delete. 3 Press the [No/C] key. 4 Using the [ * ] ...

  • Konica Minolta 160f - page 208

    7 Using the utility mode 7-44 bizhub 160f 7 Press the [Yes] key. – Other program dialing settings can be changed. 8 Press the [No/C] key to return to the FAX REGISTRATION menu. ...

  • Konica Minolta 160f - page 209

    Using the utility mode 7 bizhub 160f 7-45 To change/delete a programmed mailbox tr ansmission 1 Select the PROGRAM DIAL in the FAX REGISTRATIO N menu. For details, refer to page 7-27. 2 Press the one-touch dial ke y ([12] through [15]) programmed with the mailbox transmission that you wis h to change or delete. 3 Press the [No/C] key. 4 Using the [ ...

  • Konica Minolta 160f - page 210

    7 Using the utility mode 7-46 bizhub 160f 9 To change the password, press the [No/C] key, and then use the 10- key pad to enter the new password. 10 Press the [Yes] key. Other program dialing settings can be changed. 11 Press the [No/C] key to return to the FAX REGISTRATION menu. ...

  • Konica Minolta 160f - page 211

    Using the utility mode 7 bizhub 160f 7-47 To change/delete a programmed poll ing reception 1 Select the PROGRAM DIAL in the FAX REGISTRATIO N menu. For details, refer to page 7-27. 2 Press the one-touch dial ke y ([12] through [15]) programmed with the polling reception that you wish to change or delete. 3 Press the [No/C] key. 4 Using the [ * ] an ...

  • Konica Minolta 160f - page 212

    7 Using the utility mode 7-48 bizhub 160f 7 Press the [No/C] key to return to the FAX REGISTRATION menu. ...

  • Konica Minolta 160f - page 213

    Using the utility mode 7 bizhub 160f 7-49 To change/delete a programmed rel ay initiation transmission 1 Select the PROGRAM DIAL in the FAX REGISTRATIO N menu. For details, refer to page 7-27. 2 Press the one-touch dial ke y ([12] through [15]) programmed with the relay initiation transmission that y ou wish to change or delete. 3 Press the [No/C] ...

  • Konica Minolta 160f - page 214

    7 Using the utility mode 7-50 bizhub 160f 9 To change the password, press the [No/C] key, and then use the 10- key pad to enter the new password. 10 Press the [Yes] key. Other program dialing settings can be changed. 11 Press the [No/C] key to return to the FAX REGISTRATION menu. ...

  • Konica Minolta 160f - page 215

    Using the utility mode 7 bizhub 160f 7-51 Specifying BATCH TX If the batch transmission setting (transmi ssion time) is specified for a one- touch dial key programmed with recipient fax numbers, multiple documents can be stored in the memory and sent out together at th e specified time. 2 Note A one-touch dial key mus t first be programmed with the ...

  • Konica Minolta 160f - page 216

    7 Using the utility mode 7-52 bizhub 160f 4 Press the [No/C] key to return to the FAX REGISTRATION menu. ...

  • Konica Minolta 160f - page 217

    Using the utility mode 7 bizhub 160f 7-53 To change the batch transmission setting 1 Select the BATCH TX in the FAX REGISTRATION menu. For details, refer to page 7-27. 2 Press the one-touch dial ke y pro- grammed with the batch transmis- sion setting that you wish to change. 3 Press the [No/C] key, and then use the 10-key pad to enter the new trans ...

  • Konica Minolta 160f - page 218

    7 Using the utility mode 7-54 bizhub 160f To delete the batch transmission setting 1 Select the BATCH TX i n the FAX REGISTRATION men u. For details, refer to page 7-27. 2 Press the one-touch dial key pro- grammed with the batch transmis- sion setting that you wish to delete. 3 Press the [No/C] key. A confirmation message appears, asking whether or ...

  • Konica Minolta 160f - page 219

    Using the utility mode 7 bizhub 160f 7-55 Specifying MAILBOX Mailbox IDs must first be specified in order to receive faxes with ma ilbox re- ception only if the mailbox ID sen t by the caller matches the mailbox ID se t on this machine. 2 Note A mailbox ID cannot be the sa me as a relay box ID. To register a mailbox 1 Select the MAILBOX in the FAX ...

  • Konica Minolta 160f - page 220

    7 Using the utility mode 7-56 bizhub 160f To delete a mailbox 1 Select the MAILBOX in the FA X REGISTRATION men u. For details, refer to page 7-27. 2 Using the 10-key pad, enter the number of the mailbox that you wish to delete. 3 Press the [No/C] key. A screen appears, allowing you to enter the mailbox ID. 4 Using the 10-key pad, enter the 4- digi ...

  • Konica Minolta 160f - page 221

    Using the utility mode 7 bizhub 160f 7-57 7.7 TX operation settings From the TX OPERATION menu, various functions for sending faxes can be set. No. TX OPERATION Characteristic/Description 1 SCAN CONTRAST This function can be used to set the default scanni ng contrast level to one of five settings between “LIGHT” and “DARK”. For dark-colored ...

  • Konica Minolta 160f - page 222

    7 Using the utility mode 7-58 bizhub 160f Selecting the TX OPERATION m enu 1 Press the [Utility] key seve n times. TX OPERATION appears. 2 From the 10-key pad, press the key ([1] through [4]) for the TX operation function that you wish to set. The TX operation functions are as follows: 1 SCAN CONT RAST 2 RESOLUTION 3 DEFAULT TX 4 HEADER 2 Note If, ...

  • Konica Minolta 160f - page 223

    Using the utility mode 7 bizhub 160f 7-59 Specifying RESOLUTION 1 Select the RESOLUTION in the TX OPERATION men u. For details, refer to page 7-58. 2 Using the [ * ] and [ ) ] keys , select the desired resolution setting, and then press the [Yes] key. The resolution settings appear as fol- lows. STD: Sta ndard FINE: Fine S/F: Super Fine H/T: Half T ...

  • Konica Minolta 160f - page 224

    7 Using the utility mode 7-60 bizhub 160f Specifying DEFAULT TX 1 Select the DEFAULT TX in the TX OPERATION menu. For details, refer to page 7-58. 2 Using the [ * ] and [ ) ] keys, select ei- ther MEM.TX or ADF TX , and then press the [Yes] key. The TX OPERATION menu appears again. Specifying HEADER 1 Select the HEADER in the TX OPER- ATION menu. F ...

  • Konica Minolta 160f - page 225

    Using the utility mode 7 bizhub 160f 7-61 7.8 RX operation settings From the RX OPERATION menu, various functions for receiving faxes can be set. No. RX OPERATION Characteristic/Description 1 MEMOR Y RX MODE This function can be u sed to set whether to allow (“ON”) mem ory reception or not (“OFF”). In cases when confi dential faxes are be- ...

  • Konica Minolta 160f - page 226

    7 Using the utility mode 7-62 bizhub 160f 8 SELECT TRAY This function can be used to select which pap er tray can be used to supply paper when printin g received documents or transmis- sion reports. (A paper tray that cannot be used for supplying pa- per can also be specified.) 9C L O S E D N E T - WORK This function can be used to set whethe r or ...

  • Konica Minolta 160f - page 227

    Using the utility mode 7 bizhub 160f 7-63 Selecting the RX OPERA TION menu 1 Press the [Utility] key ei ght times. RX OPERATI ON appears. 2 From the 10-key pad, press the key ([1] through [9]) for the RX operation function that you wish to set. The RX operation functions are as follows: 1 MEMORY RX MODE 2 NO. of RINGS 3 REDUCTION RX 4 RX PRINT 5 RX ...

  • Konica Minolta 160f - page 228

    7 Using the utility mode 7-64 bizhub 160f Specifying MEMORY RX MODE 1 Select the MEMORY RX MODE in the RX OPERATION m enu. For details, refer to page 7-63. 2 Using the [ * ] and [ ) ] keys, select ON , and then press the [Yes] key . 3 Using the 10-key pad, enter the time for memory reception to begin, and then press the [Yes] key. – To specify th ...

  • Konica Minolta 160f - page 229

    Using the utility mode 7 bizhub 160f 7-65 To cancel memory reception Memory reception is automatically canc eled at the specified ending time, and the received documents are printed. If no ending time has been set or if you wish to cancel memory reception before the ending time, follow the pro- cedure described below. 1 Select the MEMO RY RX MODE i ...

  • Konica Minolta 160f - page 230

    7 Using the utility mode 7-66 bizhub 160f Specifying REDUCTION RX 1 Select the REDUCTION RX in the RX OPERATION menu. For details, refer to page 7-63. 2 Using the [ * ] and [ ) ] keys, select ON (print the document reduced), OFF (split the printout) or CUT (discard any excess), and then press the [Y es] key. The RX OPERATION m enu appears again. Sp ...

  • Konica Minolta 160f - page 231

    Using the utility mode 7 bizhub 160f 7-67 Specifying FORWARD 1 Select the FORWAR D in the RX OP- ERATION menu. For details, refer to page 7-63. 2 Using the [ * ] and [ ) ] keys, select ON , ON(PRI NT) or OF F , and then press the [Yes] key. –I f ON or ON(PRINT) was select- ed, a screen appears, allowing you to spe cify the forwarding loca- tion. ...

  • Konica Minolta 160f - page 232

    7 Using the utility mode 7-68 bizhub 160f Specifying FOOTER 1 Select the FOOTER in the RX OPER- ATION menu. For details, refer to page 7-63. 2 Using the [ * ] and [ ) ] keys, select ei- ther ON or OFF , and then press the [Yes] key. The RX OPERATION m enu appears again. Specifying SELECT TRAY 1 Select the SELECT TRAY in the RX OPERATION menu. For d ...

  • Konica Minolta 160f - page 233

    Using the utility mode 7 bizhub 160f 7-69 Specifying CLOSED NETWOR K 1 Select the CLOSED N ETWORK in the RX OPERATION menu. For details, refer to page 7-63. 2 Using the [ * ] and [ ) ] keys, select e i- ther ON or OFF , and then press the [Yes] key. The RX OPERATION menu appears again. ...

  • Konica Minolta 160f - page 234

    7 Using the utility mode 7-70 bizhub 160f 7.9 Communication settings From the COMM.SETTING menu, various functions are available for specify- ing communication settings. Selecting the COMM. SETTING m enu 1 Press the [Utility] key nine ti mes. COMM. SETTING appears. 2 From the 10-key pad, press the key ([1] through [3]) for the communica- tion setti ...

  • Konica Minolta 160f - page 235

    Using the utility mode 7 bizhub 160f 7-71 Specifying TONE/PULSE There are two types of telephone dia ling systems: tone dialing (P B) and pulse dialing (DP10pps or DP 20pps). Faxes cannot be sent if this machin e is not set to the system used by your telephone line . Select the correct setting after checking which type of dialing sy stem is used. T ...

  • Konica Minolta 160f - page 236

    7 Using the utility mode 7-72 bizhub 160f Specifying LINE MONITOR 1 Select the LINE MONITOR in the COMM. SETTING menu. For details, refer to page 7-70. 2 Using the [ * ] and [ ) ] keys, select HIGH , LOW or OFF , and then press the [Yes] key. The COMM.SETTING menu appea rs again. ...

  • Konica Minolta 160f - page 237

    Using the utility mode 7 bizhub 160f 7-73 Specifying PSTN/PBX The connected wiring system can be s et to either PSTN (Public Sw itched Telephone Network) or PBX (Priv ate Branch Exchange). For a PBX system, the outside li ne access number (or extension number) must be specified. The outside line a ccess number (or extension number) is programmed in ...

  • Konica Minolta 160f - page 238

    7 Using the utility mode 7-74 bizhub 160f 7.10 Reporting settings From the REPORTING menu, v arious functions are available for specifying which reports are automatically printed. No. REPORTING Characteristic/Description 1 ACTIVITY REPORT Every 60 transmissions/receptions, a report can be printed to show the results of the transmissions/reception s ...

  • Konica Minolta 160f - page 239

    Using the utility mode 7 bizhub 160f 7-75 Selecting the REPORTING m enu 1 Press the [Utility] key ten times. REPORTIN G appears. 2 From the 10-key pad, press the key ([1] through [4]) for the reporting function that you wish to set. The reporting functions are as fol- lows: 1 ACTIVITY REPOR T 2 RESERV.REPOR T 3 TX RESU LT REPORT 4 RX RESULT REPO RT ...

  • Konica Minolta 160f - page 240

    7 Using the utility mode 7-76 bizhub 160f Specifying RESERV.REPORT 1 Select the RESERV. REPORT in the REPORTING menu. For details, refer to page 7-75. 2 Using the [ * ] and [ ) ] keys, select ei- ther ON or OFF , and then press the [Yes] key. The REPORTING menu app ears again. Specifying TX RESULT REPOR T 1 Select the TX R ESUL T REP ORT in the REP ...

  • Konica Minolta 160f - page 241

    Using the utility mode 7 bizhub 160f 7-77 7.11 Initial user data settings From the INITIAL USER D ATA menu, various functions are available for spec- ifying the machine’s user data. Selecting the INITIAL USER DATA m enu 1 Press the [Utility] key el even times. INITIAL USER DATA appears. 2 From the 10-key pad, press the key ([1] through [3]) for t ...

  • Konica Minolta 160f - page 242

    7 Using the utility mode 7-78 bizhub 160f Specifying DATE&TIME 1 Select the DATE&TIME in the INI- TIAL USER DATA menu. For details, refer to page 7-77. 2 Using the 10-key pad, enter the cur- rent time and date. Enter the settings in the following order: hours, minutes, year, month, and day. 3 Press the [Yes] key to display the time zone set ...

  • Konica Minolta 160f - page 243

    Using the utility mode 7 bizhub 160f 7-79 Specifying USER NAME 1 Select the USER NA ME in the INI- TIAL USER DA TA menu. For details, refer to page 7-77. 2 Using the 10-ke y pad, enter the user name for the machine. – Each press of the [123/ABC] key switches the input mode be- tween numbers and letters. [1]: Numbers can be typed in. [A]: Letters ...

  • Konica Minolta 160f - page 244

    7 Using the utility mode 7-80 bizhub 160f ...

  • Konica Minolta 160f - page 245

    8 When a message appears ...

  • Konica Minolta 160f - page 246

    ...

  • Konica Minolta 160f - page 247

    When a message appears 8 bizhub 160f 8-3 8 When a message appears 8.1 When the message PAPER EMPTY appears PAPER EMPTY me ssage When the currently selected paper tray runs out of paper, the message shown below appears, and printing cannot conti nue. Check the paper tray that has run out of paper, and the n supply paper ac- cording to the following ...

  • Konica Minolta 160f - page 248

    8 When a message appears 8-4 bizhub 160f Loading paper into tray 1 1 Remove the bypass tray. 2 Load the paper in the tray so that the front side of the paper (the side fac- ing up when the package was un- wrapped) faces up. 3 Attach the bypass tray in its original position. Loading paper into the bypass tray The bypass tray can be loaded with a max ...

  • Konica Minolta 160f - page 249

    When a message appears 8 bizhub 160f 8-5 Loading paper into tray 2 (option) 1 Pull out the drawer for tray 2. 2 Remove the drawer cover, and then press down on the paper-lifting plate until it locks into place. 3 Load the paper into the drawer so that the front side of the paper (the side facing up when the package was unwrapped) faces up. 4 Attach ...

  • Konica Minolta 160f - page 250

    8 When a message appears 8-6 bizhub 160f 8.2 When the message TONER EMPTY appears TONER EMPT Y messag e When toner is about to run out, the message shown below appears, indicat- ing that the toner is almost empty. When this message appears, replace the toner cartridge with a new one as soon as possible . If you continue making copies, the toner wil ...

  • Konica Minolta 160f - page 251

    When a message appears 8 bizhub 160f 8-7 Replacing the toner cartridge 1 Open the front cover. 7 CAUTION Decreased image quality. % Since the imaging cartridge can easily be damaged by light, exposing the cartridge to light for a long period of time will result i n decreased image quality. 2 Grab the handle of the imaging car- tridge, and then pull ...

  • Konica Minolta 160f - page 252

    8 When a message appears 8-8 bizhub 160f 7 CAUTION Incorrect handling of toner cartridge. % When separating the toner cartridge from the drum cartridge, do not tilt the cartridge, otherwise toner may spill. % Do not touch the PC drum under the flap of the drum cartridge, other- wise decreased image quality may resu lt. % Do not touch any metal part ...

  • Konica Minolta 160f - page 253

    When a message appears 8 bizhub 160f 8-9 7 CAUTION Decreased image quality. % Do not touch the developer roller, otherwise decreas ed image quality may result. 6 Remove the protective cover from the toner cartridge. 7 Align the blue parts of the drum car- tridge and toner cartridge, and then attach them together. Developer roller Blue p arts ...

  • Konica Minolta 160f - page 254

    8 When a message appears 8-10 bizhub 160f 7 CAUTION Incorrect handling of image cartridge. % Do not push in the imaging cartridge with exce ssive force if the car- tridge is not correctly aligned on the rail, otherwise the u nits may be damaged. 8 Align the tab on the imaging car- tridge with the rail in the machine, and then install the cartridge. ...

  • Konica Minolta 160f - page 255

    When a message appears 8 bizhub 160f 8-11 8.3 When the message D/C LIFE appears When the drum cartridge has reached the end of its service life, the message shown below appears. When this message appears, replace the drum car- tridge with a new one as soon as possi ble. 7 CAUTION Used drum cartridges. % In order to prevent the used drum cartridge f ...

  • Konica Minolta 160f - page 256

    8 When a message appears 8-12 bizhub 160f Replacing the drum cartridge 1 Open the front cover. 7 CAUTION Decreased image quality. % Since the imaging c artridge can easily be damage d by light, exposing the cartridge to light for a long period of time will result in dec reased image quality. 2 Grab the handle of the imaging car- tridge, and then pu ...

  • Konica Minolta 160f - page 257

    When a message appears 8 bizhub 160f 8-13 7 CAUTION Incorrect handling of toner cartridge. % When separating the toner cartridge from the drum cartridge, do not tilt the cartridge, otherwise toner may spill. % Do not touch the PC drum under the fla p of the drum cartridge, other- wise decreased image quality may result. % Do not touch any metal par ...

  • Konica Minolta 160f - page 258

    8 When a message appears 8-14 bizhub 160f 7 CAUTION Incorrect handling of image cartridge. % Do not push in the imaging cartridge with exce ssive force if the car- tridge is not correctly aligned on the rail, otherwise the u nits may be damaged. 6 Align the tab on the imaging car- tridge with the rail in the machine, and then install the cartridge. ...

  • Konica Minolta 160f - page 259

    When a message appears 8 bizhub 160f 8-15 8.4 When the message PAPER MISFEED appears PAPER MISFEED message If the message shown bel ow appears during printing and the mac hine stops operating, a paper misfeed has occurred in a paper tray. Follow the procedure described below to clear the mis feed paper. Clearing a paper misfeed in the paper tray s ...

  • Konica Minolta 160f - page 260

    8 When a message appears 8-16 bizhub 160f 3 Remove all paper from tray 1. Do not reuse paper that has been misfed. 4 Reload the paper stack in the tray. 5 Attach the tray removed in step 2. 6 Reload the paper removed in step 1. 7 Remove the cover of optional tray 2, and then pull out the drawer. 8 Remove all paper from the drawer. 9 Reload the pape ...

  • Konica Minolta 160f - page 261

    When a message appears 8 bizhub 160f 8-17 10 Open, then close the front cover. ...

  • Konica Minolta 160f - page 262

    8 When a message appears 8-18 bizhub 160f 8.5 When the message PAPER JAM appears PAPER JAM message If the message shown below appears during printing and the machine stops operating, a paper misfeed has occurred in the machin e. Follow the procedure described below to clear the misfed pape r. 7 CAUTION The area around the fusing unit is extremely h ...

  • Konica Minolta 160f - page 263

    When a message appears 8 bizhub 160f 8-19 2 Remove the imaging cartridge. 3 Check the paper misfeed position. ? Do you want to clear the paper misfeeds? % When the paper misfeed has oc- curred at the fusing section con- tinue with step 4. % When the paper misfeed has oc- curred at the separating section continue with step 8. Fusing section Separati ...

  • Konica Minolta 160f - page 264

    8 When a message appears 8-20 bizhub 160f 4 Open the fuser cover at the rear side of the machine. 5 Grab both sides of the paper, and then pull it out upward. 6 Grab both sides of the paper, and then carefully pull out the sheet of paper. 7 Close the fuser cover. 8 Grab both sides of the paper, and then carefully pull the sheet of paper straight up ...

  • Konica Minolta 160f - page 265

    When a message appears 8 bizhub 160f 8-21 7 CAUTION Incorrect handling of imaging cartridge. % Do not push in the imaging cartridge with excessive force if the car- tridge is not correctly aligned on the rail, otherwise the units may be damaged. 9 Align the tab on the imaging car- tridge with the rail in the machine, and then install the cartridge. ...

  • Konica Minolta 160f - page 266

    8 When a message appears 8-22 bizhub 160f 8.6 When the message ORIG INAL DOC. JAM appears ORIGINAL DOC. JAM message If the message shown below appears while scanning an original with the au- tomatic document feeder and the machine stops operating, a paper misfeed has occurred in the automatic document feeder. Follow the procedure described below to ...

  • Konica Minolta 160f - page 267

    When a message appears 8 bizhub 160f 8-23 3 Raise the automatic document feed- er. 4 While turning the document feed knob in the direction of the arrow, gently pull out the original. 5 Close the document feeder cover. 6 Load the documents removed in step 2 back into the tray. Replace the document page that was misfed, according to the page number i ...

  • Konica Minolta 160f - page 268

    8 When a message appears 8-24 bizhub 160f 8.7 When the message PAP ER SIZE ERROR appears PAPER SIZE E RROR message If the paper size specified for a paper tray differs from the size of the paper loaded in the tray, the message shown below appears when paper is fed from that tray. Check the message for the paper tray and the paper si ze to be fed, a ...

  • Konica Minolta 160f - page 269

    When a message appears 8 bizhub 160f 8-25 3 Remove the bypass tray, and then remove all paper from the tray 1. 4 Load the desired paper into the tray. 5 Try performing the copy cycle again. Paper size error for the bypass tray 1 Remove all paper from the bypass tray. 2 Load the desired paper into the tray. ...

  • Konica Minolta 160f - page 270

    8 When a message appears 8-26 bizhub 160f 3 Select the setting for the size and type of paper that is loaded. For details, refer to “Specifying the size and type of manually fe d paper” on page 4-6. 4 Try performing the copy cycle again. A5 A5 B5 B5 A4 A4 ...

  • Konica Minolta 160f - page 271

    When a message appears 8 bizhub 160f 8-27 8.8 When the message MA CHINE TROUBLE appears If the message shown below appears, som e machine malfunction has oc- curred. Contact your service representative. W hen contacting the service representative, be sure to inform them of the machin e code (error code: C####) that was indicated. ...

  • Konica Minolta 160f - page 272

    8 When a message appears 8-28 bizhub 160f 8.9 What does each message mean? Message Cause Action *REMOVE PAPER IN BYPASS TRAY* Paper is loaded in the by- pass tray. Remove the paper f rom the bypass tray. FRONT COVER OPEN CLOSE F RONT COVER The front cover of the main unit is open or not securel y closed. Securely close the front cov- er. DOCUMENT C ...

  • Konica Minolta 160f - page 273

    When a message appears 8 bizhub 160f 8-29 LINE PROBLEM CHECK LINE The telephone dialing system or telephone wiring system are not set correctly. Check the telephone dia ling system or telephone wiring system and use the appro- priate Utility mode function to make the correct settings. The telephone cable i s not attached correctly. Correctly con ne ...

  • Konica Minolta 160f - page 274

    8 When a message appears 8-30 bizhub 160f 8.10 When incorre ct copies are produced Symptom Possible cause Action The image is too light. The density level for the Au to setting is set to “LIGHT”. Adjust the setting for DENSI- TY LEVEL (A) in the u tility mode. (p. 7-23) Otherwise, cancel the “Auto” density setting, and then man- ually selec ...

  • Konica Minolta 160f - page 275

    When a message appears 8 bizhub 160f 8-31 The copy has dark specks or spots. The copy has lines. The original glass surface i s dirty . Wipe the original glass clea n with a soft, dry cloth. The original pad is dirty. Wipe the original pad c lean with a soft cloth dampened with neutral detergent. The orig inal is highly tr anspar - ent. Place a bla ...

  • Konica Minolta 160f - page 276

    8 When a message appears 8-32 bizhub 160f * If the problem is not corrected even after the operations described above are performed, con- tact your service representative. The edge of the copy is dirty. The original pad is dirty. Wipe the original pad clean with a soft cloth dampened with neutral detergent. You have selected paper of a size larger ...

  • Konica Minolta 160f - page 277

    When a message appears 8 bizhub 160f 8-33 8.11 The machine is not functioning as designed * If the problem is not corrected even after the operations described a re performed, turn off th e machine, unpl ug its power cord, and then contact the service representative. Symptom Possible cause Action Nothing appears in the dis- play. Is only the [Start ...

  • Konica Minolta 160f - page 278

    8 When a message appears 8-34 bizhub 160f 8.12 When faxi ng is no t performed correctly Faxes cannot be sent Symptom Possible cause Remedy The document cannot be scanned. The document is too thi ck. Position the document on the original glass to send it. (p. 5-17) The document is too thin or too small. Positi on th e docu men t on th e original gla ...

  • Konica Minolta 160f - page 279

    When a message appears 8 bizhub 160f 8-35 Faxes cannot be received Symptom Possible cause Remedy The received fax is not clear . Pa per that does not meet specifications has been used. Use paper that meets specifi- cations. (p. 3-26) The paper is damp. Replace the paper. (p. 8-4 and p. 8-4) The toner is empty. Replace the toner bottle with a new on ...

  • Konica Minolta 160f - page 280

    8 When a message appears 8-36 bizhub 160f Calls cannot be sent Symptom Possible cause Remedy Nothing can be heard from the connected telephone. The cord from the telephone is not connected correctly to th e main unit. Corre ctly co nnect the tele - phone cord to the main u nit. The telephone cord from th e wall jack is not connected cor- rectly to ...

  • Konica Minolta 160f - page 281

    9 Miscellaneous ...

  • Konica Minolta 160f - page 282

    ...

  • Konica Minolta 160f - page 283

    Miscellaneous 9 bizhub 160f 9-3 9 Miscellaneous 9.1 Specifications bizhub 160f Specification Type Desktop Platen type Fixed platen (unit scan ning) Photoconductor OPC Copying system Electrostatic dry powdered image tran sfer to plain paper Developing system Single component developing system Fusing system Lamp-heated roller Resol ution 600 dpi × 6 ...

  • Konica Minolta 160f - page 284

    9 Miscellaneous 9-4 bizhub 160f L: Lengthwise Automatic document feeder L: Lengthwise Zoom ratios • Full size: × 1.00 • Enlargement ratios: × 1.15, × 1.41, × 2.00 and × 4. 00 • Reduction ratios: × 0.81, × 0.70, × 0.50 and × 0. 25 • Zoom ratios: × 0.25 to × 4 .00 (in × 0.01 incre ments) Multiple copies 1 to 99 sheets Density cont ...

  • Konica Minolta 160f - page 285

    Miscellaneous 9 bizhub 160f 9-5 Paper feed unit PF-501 L: Lengthwise Specification Kinds or paper Plain paper, recycled paper (60 g/m to 90 g/m ) Paper sizes A4 L, Le tter L Capacity 500 sheets (80 g/m ) Power consumption Less than 7 W Dimensions 4 01 mm (width) × 61 5 mm (depth) × 138 mm (height) Weight 4 kg ...

  • Konica Minolta 160f - page 286

    9 Miscellaneous 9-6 bizhub 160f 9.2 List of utility/fu nction menu commands Utility menu commands Manufacturer’s default settings appear in bold. Menu Function Sett ings 1 MACHINE SETTING 1 AUTO PANEL RESET ON (0.5/ 1 /2 /3/4/5)/OFF 2 ENERGY SAVE MO DE TIMER=1- 240 min. (Default: 15 min 3 DENSITY (ADF) MODE1 /MODE2 4 DENSITY (BOOK) MO DE1 /MODE2 ...

  • Konica Minolta 160f - page 287

    Miscellaneous 9 bizhub 160f 9-7 7 TX OPERATION 1 SCAN CONTRAST LIGHT to DARK (5 level s) 2 RESOLUT ION STD /FINE/S/F/ H/T(STD/FINE/S/F) 3 DEFAULT TX MEM.T X /ADF TX 4 HEADE R ON /OFF 8 RX OPERATION 1 MEMO RY RX MODE ON/ OFF 2 NO. of RINGS 1 to 16 (Default: 2 ) 3 REDUCTION RX ON /OFF/CUT 4 RX PRINT MEMORY RX /PRINT RX 5 RX MODE AUTO RX /MANUAL RX 6 ...

  • Konica Minolta 160f - page 288

    9 Miscellaneous 9-8 bizhub 160f Function menu commands Menu Settings 1 BROADCAST Recipients 2 TIMER TX Transmission time 3 MAILBOX TX Recipient, mailbox ID an d password 4 PRINT MAILBOX RX Mailbox ID 5 POLLING TX SINGLE/MULTI, polling ID and password 6 POLLING RX Caller, polling ID and password 7 RELAY INITIATE Recipient, relay box ID and password ...

  • Konica Minolta 160f - page 289

    Miscellaneous 9 bizhub 160f 9-9 9.3 Care of the machine Cleaning Turn off the machine before cleaning it. Housing cover % Wipe the surface of the hous ing cov- er with a soft cloth dampened with a mild household detergent. Original glass % Wipe the surface of the original glass clean with a soft, dry cloth. ...

  • Konica Minolta 160f - page 290

    9 Miscellaneous 9-10 bizhub 160f Original pad % Wipe the surface of the original pad clean with a soft cloth dampened with a mild household detergent. Control panel 7 CAUTION Incorrectly cleaning the control panel keys may damage them. % Never use mild household detergent or glass cleaner to clean th e con- trol panel. % Wipe the surface of the con ...

  • Konica Minolta 160f - page 291

    Miscellaneous 9 bizhub 160f 9-11 9.4 Function comb ination matrix Conditions for combined functions Conditions for combined functions Function set last Paper Zoom Density Ori- ginal Copy Fin- ishing Manual paper selection (tray1 or tray2) Manual paper selection (bypass tray) Fixed zoom Optional zoom Auto density Manual density Text Photo Origin al ...

  • Konica Minolta 160f - page 292

    9 Miscellaneous 9-12 bizhub 160f 9.5 Glossary Term Definition Automatic redialing If a call cannot be completed, for exa mple if the recipient’s mach ine is busy, the recipient is au tomatically called again. If a document queued in the mem ory to be sent contains multiple pages, u ntil the time for redialing has bee n reached, it is advanced i n ...

  • Konica Minolta 160f - page 293

    Miscellaneous 9 bizhub 160f 9-13 9.6 Paper size and zoom ratio tables Paper sizes Paper format Metric size English size A3 Wide 311 mm × 457 mm 12-1/4 × 18 A3 29 7 mm × 420 mm 11-3 /4 × 16-1/2 A4 21 0 mm × 297 mm 8-1/4 × 11-3/4 A5 14 8 mm × 210 mm 5-3/4 × 8-1/4 A6 10 5 mm × 148 mm 4-1/4 × 5-3/4 B4 257 mm × 364 mm 10 × 14-1/4 B5 182 mm ? ...

  • Konica Minolta 160f - page 294

    9 Miscellaneous 9-14 bizhub 160f Zoom ratios Metric sizes Document paper size Desired paper size Zoom ratio A3 297 mm × 420 mm 11-3/4 × 16-1/2 A4 × 0.70 A5 × 0.50 B4 × 0.86 B5 × 0.61 A4 210 mm × 297 mm 8-1/4 × 11 -3/4 A5 × 0.70 A6 × 0.50 B5 × 0.86 B6 × 0.61 A3 × 1.41 B4 × 1.22 A5 148 mm × 210 mm 5-3/4 × 8- 1/4 A6 × 0.70 B6 × 0.86 ...

  • Konica Minolta 160f - page 295

    Miscellaneous 9 bizhub 160f 9-15 B6 128 mm × 182 mm 5 × 7- 1/4 A6 × 0.81 A4 × 1.64 A5 × 1.15 B4 × 2.00 B5 × 1.41 Metric sizes Document paper size Desired paper size Zoom ratio English sizes Document paper size Desired p aper size Zoom ratio Ledger 11 × 17 279.4 mm × 431.8 mm 11 × 14 × 0.82 Legal × 0.72 Foolscap × 0.76 Letter × 0 .64 I ...

  • Konica Minolta 160f - page 296

    9 Miscellaneous 9-16 bizhub 160f Zoom ratio = Paper size/document size 1 inch = 25.4 mm 1 mm = 0.0394 inch Invoice 5-1/2 × 8- 1/2 139.7 mm × 215.9 mm 11 × 17 × 2.00 11 × 14 × 1.64 Legal × 1.54 Foolscap × 1.52 Letter × 1 .29 English sizes Document paper size Desired p aper size Zoom ratio ...

  • Konica Minolta 160f - page 297

    10 Index ...

  • Konica Minolta 160f - page 298

    ...

  • Konica Minolta 160f - page 299

    Index 10 bizhub 160f 10-3 10 Index Numerics 2in1 copies ............................. 4- 14 A Activity report ......................... 7- 75 Administrative setting ............ 7-18 Auto ........................................ 3-22 Auto panel reset ..................... 3-21 Auto print start ....................... 3- 22 Auto tray switching ..... ...

  • Konica Minolta 160f - page 300

    10 Index 10-4 bizhub 160f M Machine settings ...................... 7- 4 Machine status ...................... 3-40 Mailbox reception .................. 6-24 Mailbox setup ........................ 7-55 Mailbox transmission ............. 6-14 Manual reception ................... 6-23 Manual transmission ................ 6- 6 Memory full ............ ...

  • Konica Minolta 160f - page 301

    Index 10 bizhub 160f 10-5 T Timer transmission ................. 6- 12 Transmission result report ..... 7- 76 Transmission results .............. 5- 19 Transmission settings Default transmission mode 7-60 Resolution ........................ 7- 59 Scanning contrast ............ 7- 58 Turning Off ..................................... 3- 19 On ....... ...

  • Konica Minolta 160f - page 302

    10 Index 10-6 bizhub 160f ...

Manufacturer Konica Minolta Category All in One Printer

Documents that we receive from a manufacturer of a Konica Minolta 160f can be divided into several groups. They are, among others:
- Konica Minolta technical drawings
- 160f manuals
- Konica Minolta product data sheets
- information booklets
- or energy labels Konica Minolta 160f
All of them are important, but the most important information from the point of view of use of the device are in the user manual Konica Minolta 160f.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Konica Minolta 160f, service manual, brief instructions and user manuals Konica Minolta 160f. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Konica Minolta 160f.

Similar manuals

A complete manual for the device Konica Minolta 160f, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Konica Minolta 160f by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Konica Minolta 160f.

A complete Konica Minolta manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Konica Minolta 160f - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Konica Minolta 160f, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Konica Minolta 160f, that we can find in the current document
3. Tips how to use the basic functions of the device Konica Minolta 160f - which should help us in our first steps of using Konica Minolta 160f
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Konica Minolta 160f
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Konica Minolta 160f in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Konica Minolta 160f?

Use the form below

If you did not solve your problem by using a manual Konica Minolta 160f, ask a question using the form below. If a user had a similar problem with Konica Minolta 160f it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)