Manual Emerson MITX-430

160 pages 4.15 mb
Download

Go to site of 160

Summary
  • Emerson MITX-430 - page 1

    Embedded Computing f or Busines s-Critical Continuity TM MITX-430/MITX-440-DVI-2E Installa tion and U se Gu ide P/N: 6806800K37B August 2010 ...

  • Emerson MITX-430 - page 2

    © 2010 Emerson All rights reserved. T radem arks Emerson, Busines s-Critical Continuity, Eme rson Network Power and the Emerson Network Powe r logo are tradem arks and service marks of Eme rson Electric Co. © 2010 Eme rson Electr ic Co. All other product or service names are the prope r t y of thei r respective owners. Intel ® is a trademark or ...

  • Emerson MITX-430 - page 3

    Contents MITX-430/MITX-440-DVI-2E Installation and Use Guide (6 806800K37B) 3 About this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Emerson MITX-430 - page 4

    MITX-430/MITX-440-DVI-2E Installation and Use Guide (6 806800K37B) Contents 4 Contents Contents 3.2 Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 3.2.1 Clear CMOS (P3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Emerson MITX-430 - page 5

    Contents MITX-430/MITX-440-DVI-2E Installation and Use Guide ( 6806800K37B) 5 4.12.2 ICH8-M GPIO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 4.13 Chipset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Emerson MITX-430 - page 6

    MITX-430/MITX-440-DVI-2E Installation and Use Guide (6 806800K37B) Contents 6 Contents Contents 5.5.2.8 OEM-Reserved Statu s Code Ranges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103 6 Operating System and Driver Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105 6 ...

  • Emerson MITX-430 - page 7

    List of T abl es MITX-430/MITX-440-DVI-2E In stallation and Use Guide (68 06800K37B) 7 T able 1-1 Single Core Proc essor Board F ea tures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 T able 1-2 Dual C ore Proces sor Board Fe ature s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Emerson MITX-430 - page 8

    MITX-430/MITX-440-D VI-2E Installation and Use Guide (6806800K37B ) 8 List of Tables T able 5-5 ACPI Se ttings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 T able 5-6 T ru sted Computin g . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Emerson MITX-430 - page 9

    List of Tables MITX-430/MITX-440-DVI-2E In stallation and Use Guide (68 06800K37B) 9 T able A-1 Emerson Network Power - Embedded Computin g Publications . . . . . . . . . . . . . . . . . . 107 T able A-2 R el ated Specifi cations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107 ...

  • Emerson MITX-430 - page 10

    MITX-430/MITX-440-D VI-2E Installation and Use Guide (6806800K37B ) 10 List of Tables ...

  • Emerson MITX-430 - page 11

    List of Figures MITX-430/MITX-440-DVI-2E Installation and Use Gui de (6806800K37B) 11 Figure 1-1 Declara tion of Conf ormit y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Figure 1-2 Single Cor e Proce ssor Board - Se rial Numbe r Location . . . . . . . . . . . . . . . . . . . . . . . 28 Figure 1 ...

  • Emerson MITX-430 - page 12

    MITX-430/MIT X-440-DVI-2E Installation and Use Guid e (6806800K37 B) 12 List of Figures ...

  • Emerson MITX-430 - page 13

    MITX-430/MITX-440-DVI-2E Inst allation and Use Guide (68068 00K37B) 13 About this Manual Overview of Contents This manu al is divided int o the foll owing ch apte rs and appendix. z Chap ter 1, Introduc tion, on page 21 , describes the fe atures of single c ore and dual core processors, standard c ompliances, mechanical data, or dering inf o rmatio ...

  • Emerson MITX-430 - page 14

    MITX-430/MITX-440-D VI-2E Installa ti on and Use Guide (6 806800K37B) About this Manual 14 About this Manual A T A Advanc ed T echnology Attac hmen t A T API A T Att achm ent Packet Inter f ace A TX Advanc e T echnology Extended BDS Boot Device Selection BIOS Basic Input -Output System BSP B o ot St ra p P r oce sso r CMOS Compleme ntar y Metal Oxi ...

  • Emerson MITX-430 - page 15

    About this Manual MITX-430/MITX-440-DVI-2E Inst allation and Use Guide (68068 00K37B) 15 GBE Gigabit Eth ernet GLCI Gig abit LAN Connec t Inter face GP I Gen era l P u rp ose In p ut GPIO Gene ral P urpose Input Output GPO General Purpo se Output GPU Graphics Processing Unit IDE Integra ted Device El ectronics IGD Internal Grap hic s Dev ice IPL In ...

  • Emerson MITX-430 - page 16

    MITX-430/MITX-440-D VI-2E Installa ti on and Use Guide (6 806800K37B) About this Manual 16 About this Manual PWM Pulse Widt h Modulation PXE Preboot Execution En vironment RGB Re d , G re e n, B l u e RT C Real T i me Cl oc k RTS Request T o Send RXD Rec eiv e X Data SA T A Serial A T Atta chment SC Sing le Cor e SCSI Small Compute r System Inte rf ...

  • Emerson MITX-430 - page 17

    About this Manual MITX-430/MITX-440-DVI-2E Inst allation and Use Guide (68068 00K37B) 17 Conv entions The following table describes the conv entions used throughout this manual. WD T W atc h Dog Time r WP Write P rot ect XD Execut e Disable XDP Ex te nded Debu g Port Abbreviation Definition Notati on Descrip tion 0x0000000 0 T ypica l notat ion fo ...

  • Emerson MITX-430 - page 18

    MITX-430/MITX-440-D VI-2E Installa ti on and Use Guide (6 806800K37B) About this Manual 18 About this Manual Summar y of Changes This is the initial version of the manu al. Comments and Sugges tions We w elcome and apprec iat e your c o mments on our docu mentation. W e want to know what you think about our ma nuals and how we can mak e them bette ...

  • Emerson MITX-430 - page 19

    About this Manual MITX-430/MITX-440-DVI-2E Inst allation and Use Guide (68068 00K37B) 19 Mail commen ts to us by filling out the following onl ine form: http ://www .emersonnetworkpowere mbeddedcomputing.com/ > Con tac t Us > Onli ne Form I n " A r e a o f I n t e r e s t " s e l e c t " Te c h n i c a l D o c u m e n t a t i o ...

  • Emerson MITX-430 - page 20

    MITX-430/MITX-440-D VI-2E Installa ti on and Use Guide (6 806800K37B) About this Manual 20 About this Manual ...

  • Emerson MITX-430 - page 21

    Chapter 1 MITX-430/MITX-440-DVI-2E In stallation and Use Guide (68 06800K37B) 21 Introduc tion 1.1 F eatures The MITX-430 is a Mini-ITX motherboard ba sed on the Intel® At om™ D410 single-core or D510 dual-core proces sor that offe r s improved proc essing and graphics performance o ve r existing Mini-ITX Intel A tom based products. It is design ...

  • Emerson MITX-430 - page 22

    Introduction MITX-430/MITX-440-DVI-2E Inst allation and Use Guide (68068 00K37B ) 22 System BIO S fea ture One piece 4MB SPI boot device Super I/O W83627UHG-LF RT C Inte gr ated i n I CH8 -M Audio z Audio on board ( AL C888-GR-L F) z Re ar : Line-in, Line out, MIC -in LAN 10/100/1000 M Ethe rnet PHY , Inte l WG82567V USB Suppor ts 10 USB2.0 hi gh s ...

  • Emerson MITX-430 - page 23

    Introduction MITX-430/MITX-440-DVI-2E Installation and Use Guide (6 806800K37B) 23 1.1.2 MITX -440-D VI -2E The following table lists the fe atures of the dual c o re proce ssor board : LPT Port Suppor ts one parallel por t (2x13Pin Header) Fron t panel 2x5Pin header , supports power b u tton, re set butt on, powe r LED, HDD LE D, and standby LED G ...

  • Emerson MITX-430 - page 24

    Introduction MITX-430/MITX-440-DVI-2E Inst allation and Use Guide (68068 00K37B ) 24 LAN z 10/100/1000M Ethernet PHY , Intel WG82567V z 10/100/1000M Et hernet Con troller , Intel WG82574L USB Supports 10 USB2.0 high speed ports (four r ear , fiv e on header , and one mini PCI-Express) Expansion slots z One PCI-E x1 slot z One Mini-PCIE card slot z ...

  • Emerson MITX-430 - page 25

    Introduction MITX-430/MITX-440-DVI-2E Installation and Use Guide (6 806800K37B) 25 1.2 Standard C omplianc es MITX -430/M ITX -440-DVI-2E meets the f ollowing standards. Board s ize z Mini-ITX 170mm x 170mm z 6 Layers PCB T able 1-2 Dual Core Process or Board Fea tures (con tinued) Function Features T able 1-3 Stan dard Com plianc es Stan dard Desc ...

  • Emerson MITX-430 - page 26

    Introduction MITX-430/MITX-440-DVI-2E Inst allation and Use Guide (68068 00K37B ) 26 Figure 1-1 Declaration of C onformity ...

  • Emerson MITX-430 - page 27

    Introduction MITX-430/MITX-440-DVI-2E Installation and Use Guide (6 806800K37B) 27 1.3 Mechanical Data The following table provides details about the dimensions and weight of the bo ard: 1.4 Ordering Information When or dering boar d variants or boar d acces sories, use the orde r numbers give n in the following sect ions. 1.4.1 Suppor ted Board Mo ...

  • Emerson MITX-430 - page 28

    Introduction MITX-430/MITX-440-DVI-2E Inst allation and Use Guide (68068 00K37B ) 28 1.5 Produc t Identification The following graphic shows the location of the serial number labe l on the board. MITX -430 One IO shield MITX-440-D VI -2E One IO shield T able 1-6 Available Boar d Access ories (c ontinued) Orde r Numbe r Des crip tion Figure 1-2 Sing ...

  • Emerson MITX-430 - page 29

    Introduction MITX-430/MITX-440-DVI-2E Installation and Use Guide (6 806800K37B) 29 Figure 1-3 Dual Core Proc essor Board -Se rial Number Loc ation ...

  • Emerson MITX-430 - page 30

    Introduction MITX-430/MITX-440-DVI-2E Inst allation and Use Guide (68068 00K37B ) 30 ...

  • Emerson MITX-430 - page 31

    Chapter 2 MITX-430/MITX-440-DVI-2E In stallation and Use Guide (68 06800K37B) 31 Hardware Prepar ation and Installation 2.1 Environmental and P ow er Requirements The following en vironmental and power requireme nts are applicable to the motherboard. 2.1.1 Environmental R equirements Y ou must mak e su re that the motherboard, whe n operated in you ...

  • Emerson MITX-430 - page 32

    Hardware Preparation and Installation MITX-430/MITX-440-DVI-2E Inst allation and Use Guide (68068 00K37B ) 32 2.1.2 Thermal Requirements Shock 20G pe ak (half si ne) 11ms Altitude -60 to 4000 m A SL T able 2-1 Environmen tal R equiremen ts (contin ued) Req ui r ement O p era ti n g N on -o per at in g T able 2-2 Critical T empe rature Spo ts Item T ...

  • Emerson MITX-430 - page 33

    Hardware Preparation and Installation MITX-430/MITX-440-DVI-2E Installation and Use Guide (6 806800K37B) 33 2.1.3 Po wer Requirements (S ingle Core Proc essor Board) The power consumption is te sted under the following conditions with: z 1*2G memory z 1*1G memory z One 2.5" A T A HDD z One infonion TPM module z One 3.5" SA T A HDD z One S ...

  • Emerson MITX-430 - page 34

    Hardware Preparation and Installation MITX-430/MITX-440-DVI-2E Inst allation and Use Guide (68068 00K37B ) 34 VGA + L VDS dual dis play 2.1.3.2 Idle Mode Power Consumption VGA + L VDS dual dis play 12V 5V 3.3V T otal Curre nt(A) 0.88 1.8 0.67 Pow er(W) 10.56 9 2.21 21.77 z T ested with 12.1" LCD P anel (P/N: G121X1-L01). The L CD inve r te r u ...

  • Emerson MITX-430 - page 35

    Hardware Preparation and Installation MITX-430/MITX-440-DVI-2E Installation and Use Guide (6 806800K37B) 35 2.1.3.3 Standby Mode Power Consum ption 2.1.3.3.1 S3 Sleep Mode 2.1.3.3.2 S5 Sleep mode 2.1.4 Po wer Requirements (D ual Core Processor Board) The power consumption is te sted under the following conditions with: z 2*2G SO-DIMM z One 2.5” A ...

  • Emerson MITX-430 - page 36

    Hardware Preparation and Installation MITX-430/MITX-440-DVI-2E Inst allation and Use Guide (68068 00K37B ) 36 2.1.4.1 Full Loading Running Burn-in Test VGA and L VD S dual displ ay , without DVI dis play. 2.1.4.2 Idle Mode Power Consumption VGA and L VDS du al displa y , without DVI display , tested 1minute after logging in Windows XP . 12V 5V 3.3 ...

  • Emerson MITX-430 - page 37

    Hardware Preparation and Installation MITX-430/MITX-440-DVI-2E Installation and Use Guide (6 806800K37B) 37 2.1.4.3 Standby Mode Power Consum ption 2.1.4.3.1 S3 state 2.1.4.3.2 S5 State 2.2 Board Thermal Management and Placement 2.2.1 Board Thermal Management The mothe rboard provide s some thermal m ana gement strat egy , including CP U junc tion ...

  • Emerson MITX-430 - page 38

    Hardware Preparation and Installation MITX-430/MITX-440-DVI-2E Inst allation and Use Guide (68068 00K37B ) 38 Figure 2 -1 shows the thermal m anageme nt di agram. T wo PNP th ermal transistors are in tegrat ed in Pineview-D proc essor . It is used a s a diode and connects to an ex tern al digit al thermal se nsor EMC2103. CPU receiv es the data of ...

  • Emerson MITX-430 - page 39

    Hardware Preparation and Installation MITX-430/MITX-440-DVI-2E Installation and Use Guide (6 806800K37B) 39 2.3 Unpacking and Inspec ting th e Board Shipment Inspection T o inspect the shipment, f ollow the ste ps me ntioned be low: 1. V erify that you h av e rece i ved all ite ms of your shipme nt: z Quick Star t Guide and Safety Notes summ ar y z ...

  • Emerson MITX-430 - page 40

    Hardware Preparation and Installation MITX-430/MITX-440-DVI-2E Inst allation and Use Guide (68068 00K37B ) 40 2. Check for damage and report any dam age or diffe rence s to the cu stomer se r vice . 3. Re move the desiccan t bag shipped together with the produc t. 2.4 Preparing the Installation Environment Before y ou install o r repl ace compone n ...

  • Emerson MITX-430 - page 41

    Hardware Preparation and Installation MITX-430/MITX-440-DVI-2E Installation and Use Guide (6 806800K37B) 41 Prep are the compone nts to be installed or repl aced. When y ou hold or transport the compon en ts, use the special antist atic package. Prep are the cross s crewdrive r , screws, plasti c suppor ts, cooling ge l, and ESD -prev entiv e wrist ...

  • Emerson MITX-430 - page 42

    Hardware Preparation and Installation MITX-430/MITX-440-DVI-2E Inst allation and Use Guide (68068 00K37B ) 42 2.6 Memor y Module Installation and Remo val When y ou install or replac e the module, pa y atten tion to the follo wing: z The MITX -430/MITX -440-D VI-2E suppor ts si ngle c hanne l DDR2 667MHz, two SO-DIMM slots. z The SO -DIMMs must h a ...

  • Emerson MITX-430 - page 43

    Hardware Preparation and Installation MITX-430/MITX-440-DVI-2E Installation and Use Guide (6 806800K37B) 43 R emo ving Memory Module 1. W ear the ESD -prev entive wrist strap . 2. Re lease the module from the slot by pushing the spring latc hes on either side of the module out ward. 3. Lif t the module from the motherboard. Dam age of the Product a ...

  • Emerson MITX-430 - page 44

    Hardware Preparation and Installation MITX-430/MITX-440-DVI-2E Inst allation and Use Guide (68068 00K37B ) 44 ...

  • Emerson MITX-430 - page 45

    Chapter 3 MITX-430/MITX-440-DVI-2E In stallation and Use Guide (68 06800K37B) 45 Contr ols , LED s, and Conn ec tor s 3.1 Board Lay out Figure 3 -1 shows the location of the major componen ts on the mothe rboar d. Figure 3-1 Single Core Mo therboard Compone nts BIOS sock e t (far side) ...

  • Emerson MITX-430 - page 46

    Controls, LEDs, and Connectors MITX-430/MITX-440-DVI-2E Inst allation and Use Guide (68068 00K37B ) 46 Figure 3-2 Dual C ore Motherboard C omp onen ts BIOS socket (far side) ...

  • Emerson MITX-430 - page 47

    Controls, LEDs, and Connectors MITX-430/MITX-440-DVI-2E Installation and Use Guide (6 806800K37B) 47 3.2 Connectors The following subsections describe the connectors used on the board. 3.2.1 Clear CMO S (P3) 3.2.2 L VDS Header (J 5) T able 3-1 Clear CMO S Heade r Mode 1-2 short Clear CMOS T able 3-2 L VD S Header Pin Definiti on PIN PIN Name PIN PI ...

  • Emerson MITX-430 - page 48

    Controls, LEDs, and Connectors MITX-430/MITX-440-DVI-2E Inst allation and Use Guide (68068 00K37B ) 48 3.2.3 L VDS Backlight Header (P23) 3.2.4 L VDS Po wer Header P5 se lec ts the power of L CD Panel. 3.2.5 MINI IDE Header (J8) T able 3-3 L VD S Backlight Hea der PIn Definition PIN PIN Name 1V C C 1 2 V 2L V D S _ B K L T _ E N 3G N D 4 L CD_BKL_A ...

  • Emerson MITX-430 - page 49

    Controls, LEDs, and Connectors MITX-430/MITX-440-DVI-2E Installation and Use Guide (6 806800K37B) 49 3.2.6 USB Flash Header (P10) 9 IDE_D4 10 I DE_D11 11 IDE_D3 12 IDE_ D12 13 IDE_D2 14 IDE_ D13 15 IDE_D1 16 IDE_ D14 17 IDE_D0 18 IDE_ D15 19 GND 20 NC 21 IDE_RE Q 22 GND 23 IDE_IOW_N 24 GND 25 IDE_IOR_N 26 GND 27 IDE_IORD Y 28 IDE_SEL 29 IDE_A CK_N ...

  • Emerson MITX-430 - page 50

    Controls, LEDs, and Connectors MITX-430/MITX-440-DVI-2E Inst allation and Use Guide (68068 00K37B ) 50 3.2.7 USB Header (P12) 3.2.8 EL O T ouch Screen Header (P6) 7G N D 8 G N D 9K E Y1 0 N C T able 3-6 USB Fla sh Header Pin Defini tion (co ntinued) PIN PIN Name PIN PIN Name T able 3-7 USB Head er Pin Definiti on PIN PIN Name PIN PIN Name 1 VCC 5V ...

  • Emerson MITX-430 - page 51

    Controls, LEDs, and Connectors MITX-430/MITX-440-DVI-2E Installation and Use Guide (6 806800K37B) 51 3.2.9 GPIO Header (P4) 3.2.10 COM He ader (P9, P27) 3.2.11 RS -232/422/485 (P18) T able 3-9 GPIO Header Pi n Definition PIN PIN Name PIN PIN Name 1G P O 02 G P I 0 3G P O 14 G P I 1 5G P O 26 G P I 2 7G P O 38 G P I 3 9 V CC5DUAL 10 GND T able 3-10 ...

  • Emerson MITX-430 - page 52

    Controls, LEDs, and Connectors MITX-430/MITX-440-DVI-2E Inst allation and Use Guide (68068 00K37B ) 52 3.2.12 Po wer COM (P8, P26) 2 RS422TX_P 3 RS422RX_485D A T_P 4 RS422RX_485D A T_N 5G N D T able 3-12 RS -232/422/485 Jumpe r Sel ection (P28) PIN PIN Name 1-2 shor t R S -232 2-3 short RS422/RS -485 T able 3-11 RS -232/422/485 Header Pin Definitio ...

  • Emerson MITX-430 - page 53

    Controls, LEDs, and Connectors MITX-430/MITX-440-DVI-2E Installation and Use Guide (6 806800K37B) 53 3.2.13 TPM Heade r (P2) P19 2-3 shor t P20 2-3 shor t COM4 Pin9 is 12V P21 1-2 shor t COM5 Pin9 is Ring P21 2-3 shor t P22 1-2 shor t COM5 Pin9 is 5V P21 2-3 shor t P22 2-3 shor t COM5 Pin9 is 12V T able 3-14 COM4, C OM5 Pin9 Se lection (contin ued) ...

  • Emerson MITX-430 - page 54

    Controls, LEDs, and Connectors MITX-430/MITX-440-DVI-2E Inst allation and Use Guide (68068 00K37B ) 54 3.2.14 LPT Header (P11) 3.2.15 F ront Panel Header (P15) T able 3-16 LPT Header Pin Definiti on PIN PIN Name PIN PIN Name 1S T B # 2 P D 0 3 PD1 4 PD2 5 PD3 6 PD4 7 PD5 8 PD6 9P D 7 1 0 A C K # 11 BUSY# 12 PE# 13 SL CT# 14 AFD# 15 ERR# 16 INIT# 17 ...

  • Emerson MITX-430 - page 55

    Controls, LEDs, and Connectors MITX-430/MITX-440-DVI-2E Installation and Use Guide (6 806800K37B) 55 3.2.16 BIOS Progr am Header (P16) 3.2.17 F an Header (P1, P13) 9 ST AND BY LED PWR 10 S T ANDBY LED T able 3- 17 F ront Panel Head er Pin Definition (continued) PIN PIN Name PIN PIN Name T able 3-18 BIOS Program Head er Pin Definition PIN PIN Name P ...

  • Emerson MITX-430 - page 56

    Controls, LEDs, and Connectors MITX-430/MITX-440-DVI-2E Inst allation and Use Guide (68068 00K37B ) 56 3.2.18 MINI PCIE LED (P14) 3.2.19 Case Open Header (P25) T able 3-20 MINI P CIE Wireles s LAN LED Heade r Pin Definition PIN PIN Name 1V C C 3 V 3 2W W A N _ L E D # 3W L A N _ L E D # 4G N D T able 3-21 Ca se Open Head er Pin Definition PIN PIN N ...

  • Emerson MITX-430 - page 57

    Chapter 4 MITX-430/MITX-440-DVI-2E In stallation and Use Guide (68 06800K37B) 57 F unctional Description 4.1 Block Diagram Figure 4 -1 provi des a n over view of th e mai n f unc tional blocks of the mothe r board and how they are interc onnec ted. Figure 4-1 Motherboard Block Dia gram Inte l® Atom™ D4 10 or D510 Processor Inte l® 82801HBM I/O ...

  • Emerson MITX-430 - page 58

    Functional Description MITX-430/MITX-440-DVI-2E Inst allation and Use Guide (68068 00K37B ) 58 4.2 Pineview-D Proc essor The MITX -430/MITX -440-DVI-2E is designed to suppor t the Pineview-D processor . The pr o cess o r fe atu r es a re as fo ll ow s: z Single chip integrated processor , memor y controlle r , graphic controlle r with small size of ...

  • Emerson MITX-430 - page 59

    Functional Description MITX-430/MITX-440-DVI-2E Installation and Use Guide (6 806800K37B) 59 z EMC2103-2-AP CPU thermal s ensor z 9LPR501SGLFT CLK GEN z Memory slot z XDP header Figure 4 -2 shows the SMBu s device c onnec tion diagram. Figure 4-2 Board I2C Devic e Connection ...

  • Emerson MITX-430 - page 60

    Functional Description MITX-430/MITX-440-DVI-2E Inst allation and Use Guide (68068 00K37B ) 60 I2C device addre ss is give n in the table below: 4.4 System Memor y The Pineview-D inte grate s a single ch annel 64bit no n E CC DDR2 contr oller . There ar e t wo 200pin SO-DIMM slots on MITX -430/MITX-440-D VI -2E, and support s up to 4 GB (assuming 2 ...

  • Emerson MITX-430 - page 61

    Functional Description MITX-430/MITX-440-DVI-2E Installation and Use Guide (6 806800K37B) 61 The PCIE supports 2.5G transmission ra te. Figure 4 -3 shows the PCI-E connection diagram. 4.7 USB Interface The ICH8-M suppor ts 10 USB2.0 inte r face u sing UHCI or EHCI. Four USB ports are routed to USB+RJ45 c onnec tors. T wo USB ports are routed to USB ...

  • Emerson MITX-430 - page 62

    Functional Description MITX-430/MITX-440-DVI-2E Inst allation and Use Guide (68068 00K37B ) 62 Figure 4 -4 shows the routing diagram. 4.8 VGA , L VD S, LPC , and Audio Inter face A separ ate V GA a nd L VDS d isplay inter fa ce is con nec t ed to conne c tor f rom CPU. The VGA suppor ts resolution of 2048x1536 a t 60Hz. The L VDS is a single channe ...

  • Emerson MITX-430 - page 63

    Functional Description MITX-430/MITX-440-DVI-2E Installation and Use Guide (6 806800K37B) 63 4.9 D VI Inter face The DVI is s wi tched and deri ved f rom L VDS, so DVI and L V DS ca nnot b e used at th e sa me t im e. For displa y combination, use VGA + L V DS or VGA + DVI. Select the combina tion in the BI OS. 4.10 BIOS De vice A 4MB SPI Fla sh is ...

  • Emerson MITX-430 - page 64

    Functional Description MITX-430/MITX-440-DVI-2E Inst allation and Use Guide (68068 00K37B ) 64 4.12.2 ICH8-M GPIO T able 4-3 describes the ICH8-M GPIO definition. T able 4-3 ICH8-M GPIO Definition Name T yp e T olera nce Power We ll Default Signal Description Implemen tation GPIO0 I/O 3.3V Core GPI Multiplexed with BM_BUSY# Unused, PU V CC3V3 GPIO1 ...

  • Emerson MITX-430 - page 65

    Functional Description MITX-430/MITX-440-DVI-2E Installation and Use Guide (6 806800K37B) 65 GPIO12 I/O 3.3V Res ume Nativ e Native ly used a s GLAN_DOCK# Used as LAN_DISABLE# signal, output low active GPIO13 I/O 3.3V Res ume Nativ e Native ly used a s ENER GY_DETECT Unused, PU V CC3V3DUAL GPIO14 I/O 3.3V Resum e GPI Multiplexed with AC_P RE S EN T ...

  • Emerson MITX-430 - page 66

    Functional Description MITX-430/MITX-440-DVI-2E Inst allation and Use Guide (68068 00K37B ) 66 GPIO24 I/O 3.3V Res ume GPO Multiplexed with MEM_LED Unused, c onnec t to a TP GPIO25 Deskt op only I/O 3.3V Res ume Nativ e This GPIO is not imple men ted and is use d i ns tead as S TP _C P U# Use d as S T P_ CP U# GPIO26 I/O 3.3V Res ume Nativ e Multip ...

  • Emerson MITX-430 - page 67

    Functional Description MITX-430/MITX-440-DVI-2E Installation and Use Guide (6 806800K37B) 67 GPIO36 I/O 3.3V Core GPI Multiplexed with SA T A2G P Unused, PD GND GPIO37 I/O 3.3V Core GPI Mobile:Unmultiple xed. Unused, PD GND GPIO38 I/O 3.3V Core GPI Multiplexed with SL OAD Unused, PU V CC3V3 GPIO39 I/O 3.3V Core GPI Multiplexed with SD A T AOUT0 Unu ...

  • Emerson MITX-430 - page 68

    Functional Description MITX-430/MITX-440-DVI-2E Inst allation and Use Guide (68068 00K37B ) 68 4.13 Chipset The MITX-430/MITX -440-D VI-2E is designed to u se the Intel ICH8 M I/O Hub. The ICH8 pro vides ex tensive I/O support. F unc tions and capabilities are as f ollows: z PCI Express Base Spec ificat ion, suppor ts Re vision 1.1. z PCI Local Bus ...

  • Emerson MITX-430 - page 69

    Functional Description MITX-430/MITX-440-DVI-2E Installation and Use Guide (6 806800K37B) 69 4.14 Clock Generator The MITX-430/MITX -440-DVI-2E con t ains a CK505 clock ge nerat or (IC S9LPR501) to pro vide the clocks for variou s components. 4.15 Video The graphic core is int egrated in Pinevie w -D proces sor . The GPU contains a refr esh of 3rd ...

  • Emerson MITX-430 - page 70

    Functional Description MITX-430/MITX-440-DVI-2E Inst allation and Use Guide (68068 00K37B ) 70 4.17 Super I/O MITX -430/MITX- 440-DVI-2E uses Winbond W83627UHG-LF as Super I/O. z Seri al Por t MITX -430/M ITX -440-DVI-2E suppor ts six seria l por ts: — T wo to D SUB-9 in rear I/O region — One RS -232/422/485 por t — T w o p o w e r C O M — ...

  • Emerson MITX-430 - page 71

    Functional Description MITX-430/MITX-440-DVI-2E Installation and Use Guide (6 806800K37B) 71 The SPI fla sh par t t ype is A T25DF321A-SH- T from Atme l. The A T25DF321A-SH - T suppor ts SPI, and a high performance du al output SPI using f our pi ns: se rial clock, chipset select , serial data I/O, and seri al data out. SPI c lock frequenc ies of u ...

  • Emerson MITX-430 - page 72

    Functional Description MITX-430/MITX-440-DVI-2E Inst allation and Use Guide (68068 00K37B ) 72 The RT C also suppor ts t wo lockable memory ranges . By setting bit s in the configuration spac e, t wo 8-by te ranges can be locked to re ad an d write ac cesses. This preve nts unauthor ized read ing of pa sswords or o t her syst em security informa ti ...

  • Emerson MITX-430 - page 73

    Chapter 5 MITX-430/MITX-440-DVI-2E In stallation and Use Guide (68 06800K37B) 73 Ope r at ion 5.1 POST After powe r up or reset, th e BIOS pe r forms a self -test, POST , that att empts to de te rmine if fur ther operation is possible and that the detected configuration is expec ted. This process either c ompletes normally or results in a warning o ...

  • Emerson MITX-430 - page 74

    Operation MITX-430/MITX-440-DVI-2E Inst allation and Use Guide (68068 00K37B ) 74 5.4 Setup Utilit y The BIOS incorpora tes a setup utilit y that allows y ou to alter a v ariety of system op tions. This section describe s the operation o f the utilit y by desc ribing the vari ous op tions avail able through a set of hierarc hical menus. Not all op ...

  • Emerson MITX-430 - page 75

    Operation MITX-430/MITX-440-DVI-2E Installation and Use Guide (6 806800K37B) 75 5.4.2 Advanced Menu Pr oj ect V ers io n Pr oj ect na me an d it s v ersi on. Build Date BIOS build dat e. System Langua ge System se tup language . Only English is available. System Date Set the time and da te in month/day/year format. T o chan ge t hese va lu es, g o ...

  • Emerson MITX-430 - page 76

    Operation MITX-430/MITX-440-DVI-2E Inst allation and Use Guide (68068 00K37B ) 76 EMC2103 H /W Monit or Monitor hardw are status, see T abl e 5-12 on page 81 . Super IO Configuration System supe r IO chip paramete r s, see T able 5-13 on page 81 . W83627UHG H /W Monit or Monitor hardw are status, see T abl e 5-22 on page 86 . Serial Port Console Re ...

  • Emerson MITX-430 - page 77

    Operation MITX-430/MITX-440-DVI-2E Installation and Use Guide (6 806800K37B) 77 No TPM Hardware If no TPM is found. TPM Enabl ed Stat us Show TPM status, En abled or Disabl ed TPM Ac ti ve Status Sh ow curr ent state of the T PM, Ac ti vated o r Deac tivat ed. TPM Own er S tatu s S how c urre nt TPM Own ershi p stat e, Own ed or Un Owned. T able 5- ...

  • Emerson MITX-430 - page 78

    Operation MITX-430/MITX-440-DVI-2E Inst allation and Use Guide (68068 00K37B ) 78 Ratio Status Ratio Status Actual R atio Actua l rati o Processor Stepping Processor stepping Microc ode Re vision Microc ode rev ision L1 Cache RAM L1 Cache RAM L2 Cache RAM L2 Cache RAM Proce ssor Core Proces sor Core Hyper - Threading Enabled for Windows XP and Li n ...

  • Emerson MITX-430 - page 79

    Operation MITX-430/MITX-440-DVI-2E Installation and Use Guide (6 806800K37B) 79 Configure SA T A as Enh anced: you can se lect the IDE, AHC I mode. Compatible : you can selec t the legacy IDE Channels as SA T A O nly , SA T A P r i , PATA S e c , PATA o n l y. T able 5-10 IGD -L C D Co ntrol Field De scription DVMT Mode Se lec t Select D VMT Mode o ...

  • Emerson MITX-430 - page 80

    Operation MITX-430/MITX-440-DVI-2E Inst allation and Use Guide (68068 00K37B ) 80 L CD Mode Set L CD Mode as PWM Mode or DC Mode. Defa ult val ue is PWM Mode . T able 5-11 USB Co nfiguration Field De scription USB De vic es List o f the USB devic es attached . Legacy USB Suppor t Enables Legacy USB suppor t. AUT O option disables legacy suppor t if ...

  • Emerson MITX-430 - page 81

    Operation MITX-430/MITX-440-DVI-2E Installation and Use Guide (6 806800K37B) 81 T able 5-12 EMC2103 H/W Monitor Field De scription CP U T emp erat u re C PU tem per at ur e. CPU F an Speed CPU fan speed. CPU F an Duty C ycle CPU fan d uty c ycle . Autom atic F an Control Enab le or disable the CPU f a n speed c ontrol. Default val ue is Enabled . T ...

  • Emerson MITX-430 - page 82

    Operation MITX-430/MITX-440-DVI-2E Inst allation and Use Guide (68068 00K37B ) 82 T able 5-14 Serial Port 1 Confi g uration Field De scription Serial Port En able or disable serial por t. Default value is Enabled . Change Settings Select an optimal settings for supe r IO device . Th e options are: z Auto z IO=3F8h; IRQ=4 z IO=3F8h ; IRQ=3,4,5, 6,7, ...

  • Emerson MITX-430 - page 83

    Operation MITX-430/MITX-440-DVI-2E Installation and Use Guide (6 806800K37B) 83 T able 5-16 Serial Port 3 Confi g uration Field De scription Serial Port En able or disable serial por t. Default value is Enabled . Change Settings Select an optimal settings for supe r IO device . z Auto z IO=3E8h; IRQ=7 z IO=3F8h ; IRQ=7,10,1 1,12 z IO=2F8h ; IRQ=7,1 ...

  • Emerson MITX-430 - page 84

    Operation MITX-430/MITX-440-DVI-2E Inst allation and Use Guide (68068 00K37B ) 84 T able 5-18 Serial Port 5 Confi g uration Field De scription Serial Port En able or disable serial por t. Default value is Enabled . Change Settings Select an optimal settings for supe r IO device . Th e options are: z Auto z IO=2E0h; IRQ=10 z IO=3F8h ; IRQ=7,10,1 1,1 ...

  • Emerson MITX-430 - page 85

    Operation MITX-430/MITX-440-DVI-2E Installation and Use Guide (6 806800K37B) 85 T able 5-20 Parallel Por t Con figuration Field De scription Parallel Por t Enable or disable parallel por t (LP T/LPTE). Default val ue is Enabled . Change Settings Select an optimal settings for supe r IO device . Th e options are: z Auto z IO=378h; IRQ=5 z IO=378h; I ...

  • Emerson MITX-430 - page 86

    Operation MITX-430/MITX-440-DVI-2E Inst allation and Use Guide (68068 00K37B ) 86 T able 5-22 W83627UHG H/W Monitor Field De scription Sy st em tem per at ur e Sh ows s ys tem tem per at ur e. System F an Speed Shows system fan speed . CPU_VC ORE Monitors the CPU VC ORE voltage. 1.05V M onitors the VCC 1.05V . 3.3V Monitors the V CC 3V . 5V Monitor ...

  • Emerson MITX-430 - page 87

    Operation MITX-430/MITX-440-DVI-2E Installation and Use Guide (6 806800K37B) 87 Serial Port for Out-of -Band Management/Wi ndows Emergency Management Ser vices (EMS) : Out -of-Band Mgmt P ort Microsoft Windows Emerge nc y Manage ment Se r vices (EM S ) all ows for rem ote mana gement of Wi ndow s Ser ver OS t hro ugh a serial port . The options are ...

  • Emerson MITX-430 - page 88

    Operation MITX-430/MITX-440-DVI-2E Inst allation and Use Guide (68068 00K37B ) 88 Bits per sec ond Selects serial port transmis sion speed. The speed must be m atched on the other side . Long or noisy lines may require low er speeds. z 9600 z 19200 z 57600 z 115200 Defa ult val ue is 115200 . Da ta Bits Data b its of 7 and 8. De fault is 8 . Pari t ...

  • Emerson MITX-430 - page 89

    Operation MITX-430/MITX-440-DVI-2E Installation and Use Guide (6 806800K37B) 89 5.4.3 Chips et Menu T able 5-25 Chips et Menu Field De scription Host Bridge Host Bridge Paramet ers, see T able 5-26 on page 89 . South Bridge South Bridge Parameters, see T able 5-27 on page 89 . T able 5-26 Host Bridge Field De scription Initiate Graphic Adapte r Sel ...

  • Emerson MITX-430 - page 90

    Operation MITX-430/MITX-440-DVI-2E Inst allation and Use Guide (68068 00K37B ) 90 5.4.4 Boot Menu PCI Express Por t 1 E nable or disable PCI Ex press R oot Por t1. The options are: z Auto z Enab led z Disabled Defau lt value is Auto . 82574L LAN Controller Enable or disable on b oard WG82574L chip. Defa ult val ue is Enabled . Note th at this is on ...

  • Emerson MITX-430 - page 91

    Operation MITX-430/MITX-440-DVI-2E Installation and Use Guide (6 806800K37B) 91 5.4.5 Securit y Menu 5.4.6 Save & Exit Menu Option ROM Message s Set display mode for Option R O M. The options are Force BIO S a nd Kee p Current . Defa ult val ue is Force BIOS . Boot Op tion Prioritie s Se ts the syste m boot orde r . Hard D rive Boo t Order Set ...

  • Emerson MITX-430 - page 92

    Operation MITX-430/MITX-440-DVI-2E Inst allation and Use Guide (68068 00K37B ) 92 5.5 POST Codes 5.5.1 Status Code R anges Save a s User Defaults Sa ve the changes done so far as user de faults. Re store Use r Defaults Restore the u ser de fault s to all the setup options. Boot Ove rride Overrides the boo t orders in Boot menu. So you can se l ect ...

  • Emerson MITX-430 - page 93

    Operation MITX-430/MITX-440-DVI-2E Installation and Use Guide (6 806800K37B) 93 5.5.2 Standard S tatus Codes 5.5.2.1 SEC Status Codes T able 5-32 SEC S tatu s Codes St at us Co d e Des cr i pt i on 0x0 Unu sed. Progre ss Cod es 0x1 Powe r on. Rese t t ype detection (soft/hard). 0x2 AP initialization before microc ode l oading. 0x3 North Bridge init ...

  • Emerson MITX-430 - page 94

    Operation MITX-430/MITX-440-DVI-2E Inst allation and Use Guide (68068 00K37B ) 94 5.5.2.2 PEI Status Codes T able 5-33 PEI St atu s Cod es St at us Co d e Des cr i pt i on Progre ss Cod es 0x10 PEI Core i s star ted. 0x11 Pre-me mor y CPU initi alization is sta r ted. 0x12 CPU pre-memor y initialization (CPU module specific). 0x13 CPU pre-memor y i ...

  • Emerson MITX-430 - page 95

    Operation MITX-430/MITX-440-DVI-2E Installation and Use Guide (6 806800K37B) 95 0x30 Re ser ved f or ASL, see T abl e 5-38 on page 10 2 . 0x31 Memory Installed. 0x32 CPU post -memor y init ialization is star ted. 0x33 CPU post -memor y init ialization. Cache initialization. 0x34 CPU post -memor y init ialization. Application Processor(s) (AP) initi ...

  • Emerson MITX-430 - page 96

    Operation MITX-430/MITX-440-DVI-2E Inst allation and Use Guide (68068 00K37B ) 96 0x53 Memory initiali zation error . No u sable memory detected. 0x54 Unspe cified memory ini tialization error . 0x55 Memory not instal led. 0x56 Invali d CPU type or Speed. 0x57 CPU mism atc h. 0x58 CPU self test failed or possible CPU cache error . 0x59 CPU mi cro - ...

  • Emerson MITX-430 - page 97

    Operation MITX-430/MITX-440-DVI-2E Installation and Use Guide (6 806800K37B) 97 5.5.2.3 PEI Beep Codes 0xF3 Rec ove r y firmware im age found. 0xF4 Rec ove r y firmware im age loaded. 0xF5 - 0xF7 Rese r ved for future AMI progre ss codes. Rec overy Error Codes 0xF8 Recov er y PPI is not avail able. 0xF9 Rec ove r y capsule is n ot found. 0xF A Inva ...

  • Emerson MITX-430 - page 98

    Operation MITX-430/MITX-440-DVI-2E Inst allation and Use Guide (68068 00K37B ) 98 5.5.2.4 DXE Status Codes T able 5-35 DX E St atus C odes St at us Co d e Des cr i pt i on 0x60 D XE Core is sta r ted. 0x61 NVRAM initi alization. 0x62 Installati on of the Sout h Bridge R untime Services. 0x63 CPU D XE initiali zation i s star ted . 0x64 CPU D XE ini ...

  • Emerson MITX-430 - page 99

    Operation MITX-430/MITX-440-DVI-2E Installation and Use Guide (6 806800K37B) 99 0x78 ACP I module in itial izatio n. 0x79 CSM initi alization. 0x7A R eserved f or future AMI D XE code s. 0x80 OEM D XE initiali zation c odes. 0x90 Boot De vice Se lec tion (BDS) pha se is star ted. 0x91 Dri ve r connecting i s star ted. 0x92 P CI Bus initializa tion ...

  • Emerson MITX-430 - page 100

    Operation MITX-430/MITX-440-DVI-2E Inst allation and Use Guide (68068 00K37B ) 100 0xA8 SCSI en able . 0xA9 Setup verif ying password. 0xA A Res erved for ASL. See T able 5-38 on p age 102 . 0xAB Start of setu p. 0xAC Setup i nput wait. 0xAD Re ady to boo t eve nt. 0xAE Leg acy boot ev ent. 0xAF Exit boot se r vices e ve nt. 0xB0 Run time set virtu ...

  • Emerson MITX-430 - page 101

    Operation MITX-430/MITX-440-DVI-2E Installation and Use Guide (6 806800K37B) 101 5.5.2.5 DXE Beep Codes 5.5.2.6 CPU Exception Status Codes 0xD8 Invalid pa ssword. 0xD9 Error loading boo t option (LoadIm age returned error). 0xD A Boot option failed (S tar tImage returned error). 0xDB Flash up dat e failed. 0xDC Re set protoc ol i s not available . ...

  • Emerson MITX-430 - page 102

    Operation MITX-430/MITX-440-DVI-2E Inst allation and Use Guide (68068 00K37B ) 102 5.5.2.7 ASL Status Codes 0x04 Ove r flow , INT 0 instruction. 0x05 Bound range exc eeded. 0x06 Inva lid OpC ode (unde fined OpC ode). 0x07 Devic e not avail able (no Math C o-Process or). 0x08 Double fault. A ny instruction to the CPU that can genera te an NMI or Int ...

  • Emerson MITX-430 - page 103

    Operation MITX-430/MITX-440-DVI-2E Installation and Use Guide (6 806800K37B) 103 5.5.2.8 OEM-Reserved Status Code Ranges 0x05 System is e ntering S5 slee p state . 0x10 System is w aking up from the S1 sleep sta te. 0x20 System is w aking up from the S2 sleep sta te. 0x30 System is w aking up from the S3 sleep sta te. 0x40 System is w aking up from ...

  • Emerson MITX-430 - page 104

    Operation MITX-430/MITX-440-DVI-2E Inst allation and Use Guide (68068 00K37B ) 104 ...

  • Emerson MITX-430 - page 105

    Chapter 6 MITX-430/MITX-440-DVI-2E In stallation and Use Guide (68 06800K37B) 105 Operating System and Driv er Suppor t 6.1 Suppor ted Operating Sy stem The su pp or ted Op erat ing Sy stem s a re: z Micr osof t X P SP3 z Microsoft XP Em bedded z R edhat Fedora Core 11 6.2 Suppor ted Driv er s T able 6-1 Supported Drivers Drive rs WinXP 32bit WinXP ...

  • Emerson MITX-430 - page 106

    Operating System and Driver Support MITX-430/MITX-440-DVI-2E Inst allation and Use Guide (68068 00K37B ) 106 ...

  • Emerson MITX-430 - page 107

    Appendix A MITX-430/MITX-440-D VI-2E Installation and U se Guide (6806800K3 7B) 107 A R elated Document ation A .1 Emer son Embedded Communications Computing Docu ments The Emerson Net work Powe r - Embedded Computing publica tions listed be low are ref erenced in this manual. Y ou can obtain elec tronic copies of Emerson Net wor k Power - Embedded ...

  • Emerson MITX-430 - page 108

    Related Documentation MITX-430/MITX-44 0-DVI-2E Installa tion and Use Guide (6806 800K37B ) 108 PCI ht tp:/ /w ww.p cis ig .com / PCI Local Bus Specifica tion Revision 2.3, March 29, 2002 Copyright. PCI Express Card Electromechanical Specification Revision 1.1, Marc h 28, 2005. PCI Express Base Specifica tion Revision 1.1, March 28, 2005. SA T A ht ...

  • Emerson MITX-430 - page 109

    MITX-430/MITX-440-DVI-2E In stallation and Use Guide (68 06800K37B) 109 Sa fet y N otes This section provide s warning s that prec ede pot enti ally dangerou s procedures t hroughout this manu al. Instructions contained in the warning s must be follo wed during all pha ses of operation, serv ice , and repair o f this equipment. Y ou should also emp ...

  • Emerson MITX-430 - page 110

    MITX-430/MIT X-440-DVI-2E Installation and Use Guid e (6806800K37 B) Safety Notes 110 EMC FCC Class B This equipment has been tested and foun d to comply with the limits for a Class B digital de vice, pursu ant to P ar t 15 of the FCC Rules, EN55022. These limits are designed to pr ovide reasonab le protec tion against harmfu l interference wh en t ...

  • Emerson MITX-430 - page 111

    Safety Notes MITX-430/MITX-440-DVI-2E In stallation and Use Guide (68 06800K37B) 111 A s soon as y ou modif y the produc t or change the def ault configura tion you are responsibl e for complying with all relevant regulatory standards. V CCI This is a Cla ss B product based on the standard o f the V oluntar y Control Counc il for Inte r fere nce by ...

  • Emerson MITX-430 - page 112

    MITX-430/MIT X-440-DVI-2E Installation and Use Guid e (6806800K37 B) Safety Notes 112 z Install the system s afe ly . Mak e sure that cables and cor ds are out of th e way . z Mak e sure that the se t-up is comf or table for use r s. Product Damage Using wire si ze s that are no t sufficie nt for you r en vironmen t ma y result in cable dam age . A ...

  • Emerson MITX-430 - page 113

    Safety Notes MITX-430/MITX-440-DVI-2E In stallation and Use Guide (68 06800K37B) 113 Pe rsonal or Syste m Damage The syste m is supplied by a SEL V ONL Y voltage (equipmen t is Cla ss III nonene rgy hazard circuits). This voltag e is considered ha zardous. Mak e sure that the ex ternal powe r supply meets the re levant safe t y st andards. Make sur ...

  • Emerson MITX-430 - page 114

    MITX-430/MIT X-440-DVI-2E Installation and Use Guid e (6806800K37 B) Safety Notes 114 Product Damage Improper re moval of the product from the packaging can damage the FRU e jec tor handles at the bottom. Do not tilt the syste m for ward or back wa rd when remo ving it from the packaging. Operat ion System Dam age During the c our se of h andling, ...

  • Emerson MITX-430 - page 115

    Safety Notes MITX-430/MITX-440-DVI-2E In stallation and Use Guide (68 06800K37B) 115 Syste m Damage or Pe r sonal Inj ur y Covers and Panels F ailure to oper ate the syste m without co ve ring vacant slots v oids the manufacturer’s warran t y . Do not operate the syste m with open module slots. For optim al cooling of the syste m and ass ocia ted ...

  • Emerson MITX-430 - page 116

    MITX-430/MIT X-440-DVI-2E Installation and Use Guid e (6806800K37 B) Safety Notes 116 T o guaran tee proper airflow through the system the air filters ha ve to be replac ed at le ast ev er y six m onth s. Em er so n r ecom m ends to r epla ce th e ai r f ilt ers ever y 9 0 day s. F ilter rep lacement frequency depe nds on the environme nt the syste ...

  • Emerson MITX-430 - page 117

    Safety Notes MITX-430/MITX-440-DVI-2E In stallation and Use Guide (68 06800K37B) 117 Pe rsonal In jur y or Shor t Circuits Blade or P ower Supply In cas e the ORing diode s of the product fail, the product may trigge r a shor t circuit be t ween input line A and input line B so th at line A rem ains powe red eve n if it is disconnected from the pow ...

  • Emerson MITX-430 - page 118

    MITX-430/MIT X-440-DVI-2E Installation and Use Guid e (6806800K37 B) Safety Notes 118 Product Damage T oo muc h fo rce may da mag e t he res et sw itc h. Use min imal f o rce whe n pressing the rese t switch. Grounding Product Damage If the product is not pr operly grounded, it ma y be dam aged by electrostatic d isch arge . Mak e sure that eac h o ...

  • Emerson MITX-430 - page 119

    Safety Notes MITX-430/MITX-440-DVI-2E In stallation and Use Guide (68 06800K37B) 119 This equipme nt is designed to pe rmit the connection of the earthed conductor of the DC supply circuit to the e ar thing conductor at the equi pment. If this c onnection is made , all of the foll owing cond itions must be met: z This equipme nt shall be c onnec te ...

  • Emerson MITX-430 - page 120

    MITX-430/MIT X-440-DVI-2E Installation and Use Guid e (6806800K37 B) Safety Notes 120 Personal Injur y Cables tha t are not installed sec urely can cau se injuries due to entangle ment or trippin g. Mak e sure cables are secure ly installed. Neve r ch ange the system ’s cabling as de livered b y Emerson. The cabling sho uld follo w existing cable ...

  • Emerson MITX-430 - page 121

    Safety Notes MITX-430/MITX-440-DVI-2E In stallation and Use Guide (68 06800K37B) 121 Product Malfunction Connecting more than one seri al por t may cre ate a con flict and the serial port may not ope rat e cor r e c t ly. Although se rial por ts are avai lable a t the face pl ate an d DMC, only one shoul d be connected a t any giv en time . PEM Sys ...

  • Emerson MITX-430 - page 122

    MITX-430/MIT X-440-DVI-2E Installation and Use Guid e (6806800K37 B) Safety Notes 122 Personal Injur y Re m oving power from the PEMs cann ot be accomp lished by pu shing the PEM's break ers to the OFF position. The PEMs remain powered until the -48 VDC power to e ach PEM is completely removed. Mak e sure you disc onnect the power a t the exte ...

  • Emerson MITX-430 - page 123

    Safety Notes MITX-430/MITX-440-DVI-2E In stallation and Use Guide (68 06800K37B) 123 Product Damage Improper cabling dam ages your product. Tie the 48 V powe r cable to the most po sitive si de. F or example, if the power supply is labe led -48 V and RETURN, connect the 48 V power cable to RETURN. If the power supply is l abeled +48 V and GND , con ...

  • Emerson MITX-430 - page 124

    MITX-430/MIT X-440-DVI-2E Installation and Use Guid e (6806800K37 B) Safety Notes 124 Fa n D a m a g e When a f an tray is tak en out of ope ration, the syste m man ager c o mpensa tes f or the loss by incre asing the s peed of the rem aining fans. T urning on high s peed for a long time m ay shorten the lif e of the f ans. Perform the fan tray rep ...

  • Emerson MITX-430 - page 125

    Safety Notes MITX-430/MITX-440-DVI-2E In stallation and Use Guide (68 06800K37B) 125 Personal Injur y R otating F ans Inserting tools or fin gers int o operation al fans may caus e injuri es. Ke ep c lear of the fans as lo ng as the y are rotating. System Dam age The syste m will be da maged if y ou repl ace the cooling uni t during syste m operati ...

  • Emerson MITX-430 - page 126

    MITX-430/MIT X-440-DVI-2E Installation and Use Guid e (6806800K37 B) Safety Notes 126 Product Damage Bent pins or loose c omponents can caus e dama ge to the product, the backplane , or othe r system c omponen ts. Carefully ins pect the produc t and the backplane for bo th pin and component in tegrit y before installation. Product Damage Incorr ect ...

  • Emerson MITX-430 - page 127

    Safety Notes MITX-430/MITX-440-DVI-2E In stallation and Use Guide (68 06800K37B) 127 System Dam age If the system is ov erload ed it gets damaged. T o avoid sy ste m ov erload c heck the total po wer c onsumption o f all c ompone nts installed. Mak e sure that any individu al output current o f any compone nt stays within its acce ptable limits. Fo ...

  • Emerson MITX-430 - page 128

    MITX-430/MIT X-440-DVI-2E Installation and Use Guid e (6806800K37 B) Safety Notes 128 Da ta Loss (commen t: applies to blades with Emerson-IPMC) Re moving the RTM wi th the syste m powe r on and the blue LED on the fron t blade still fl ashing cause s data loss. Bef ore remo ving the RTM fr om a powered system, powe r down the slot and the front bl ...

  • Emerson MITX-430 - page 129

    Safety Notes MITX-430/MITX-440-DVI-2E In stallation and Use Guide (68 06800K37B) 129 Personal Injur y Optical SFP/SFP+ modules ma y be cla ssified as lase r produc ts. When installing and using any of these SFP/SFP+ modules, the regu lations which c orrespond to the re spective lase r class apply to the whole RTM. No t complyin g to these regula ti ...

  • Emerson MITX-430 - page 130

    MITX-430/MIT X-440-DVI-2E Installation and Use Guid e (6806800K37 B) Safety Notes 130 Dat a Loss Exc hanging the batte r y always results in d ata loss of the devic es which u se the batte r y as power backup . Back up affec ted data before exchanging the batter y . Dat a Loss Installing another batte r y t ype than the one that is mounted at produ ...

  • Emerson MITX-430 - page 131

    Safety Notes MITX-430/MITX-440-DVI-2E In stallation and Use Guide (68 06800K37B) 131 Environment Environme ntal Dam age Improperly di sposin g of u sed produc ts ma y harm the en vironment. Always dis pose of used products accor ding to your c ountr y’s legislation and manu facturer’s instruc tion s. ...

  • Emerson MITX-430 - page 132

    MITX-430/MIT X-440-DVI-2E Installation and Use Guid e (6806800K37 B) Safety Notes 132 ...

  • Emerson MITX-430 - page 133

    MITX-430/MITX-440-DVI-2E In stallation and Use Guide (68 06800K37B) 133 Sicherheitshinw eise Dieses K apite l enthält Hinwe ise, die pote ntiell ge fährliche n Prozedure n innerhalb dies es Handbuchs v orrangeste llt sind. Be achte n Sie unbedingt in alle n Phase n des Be trieb s, de r W ar tung und de r Re paratur des Syste ms die Anweisunge n, ...

  • Emerson MITX-430 - page 134

    MITX-430/MIT X-440-DVI-2E Installation and Use Guid e (6806800K37 B) Sicherheitshinweise 134 Em er son u nd un sere Zu lie ferer u nter neh men gr öß te An st reng u ng en um s ich er zus tell en, dass sich Pins und S tecke r von Boards v or dem V erl as sen de r Produktionsstä tte in ei nwandfre iem Zust an d b efi nd en. V erb og ene Pi ns , v ...

  • Emerson MITX-430 - page 135

    Sicherheitshinweise MITX-430/MITX-440-DVI-2E In stallation and Use Guide (68 06800K37B) 135 W enn dieses Pr odukt ohne F rontblende a usge lief er t wird oder w enn die Fr ontble nde entfe rnt wird, mu ss Ihr System die notwendige nSch utzmec hnismen gege n elektrom agnetische inte r fere nze n bere itste llen, um die Einh altung der e l etrom agne ...

  • Emerson MITX-430 - page 136

    MITX-430/MIT X-440-DVI-2E Installation and Use Guid e (6806800K37 B) Sicherheitshinweise 136 Beac hten Si e folg end e al lgem ein en Sic her hei ts hi nw eis e b ei d er I ns ta l latio n de s S ys tems: z Bere ich mit einges chränkte m Zugang - Installiere n Sie das Syste m nur in Bere ichen mit einge schränktem Z ugang. z Installationsri chtli ...

  • Emerson MITX-430 - page 137

    Sicherheitshinweise MITX-430/MITX-440-DVI-2E In stallation and Use Guide (68 06800K37B) 137 Beschädigung de s Systems Die G leic hspa nn ung sein gä ng e d es S ys tems d ür fen auss chl ieß li ch a n zug elassene T e lek o mmunikationsnetzspannungen (TNV) oder Sicherheits-Kleinspannungs-Stromkreise (SEL V) angeschlossen werden. W enn Sie d as ...

  • Emerson MITX-430 - page 138

    MITX-430/MIT X-440-DVI-2E Installation and Use Guid e (6806800K37 B) Sicherheitshinweise 138 Beschädigung de s Produktes W enn d as System nic ht ordnung sgemäß installiert wird, kann es heru nte r fallen. Zur Bef estigung des Systeme s müsse n Sie Ihre eigene Hardwar e bere itstelle n. Emerson empfie hlt ausdrücklich de n Einsatz v on Schiene ...

  • Emerson MITX-430 - page 139

    Sicherheitshinweise MITX-430/MITX-440-DVI-2E In stallation and Use Guide (68 06800K37B) 139 Um ein e a usr eich end e L üf tu ng zu g ew äh rl eis ten, s tell en S ie si cher, dass das Sy stem wä hr end des Betrie bs waage recht ste ht. Halten Sie di e Lüf tungs schlitz e an der Oberse ite , der Rückseit e und den Seite n des Systems fre i. Ha ...

  • Emerson MITX-430 - page 140

    MITX-430/MIT X-440-DVI-2E Installation and Use Guid e (6806800K37 B) Sicherheitshinweise 140 Üb erlas ten S ie kein e Z weig lei tu ngen . Ü b erpr ü fen Si e d ie Do k um entat io n u nd /o der die T ype nschilder alle r Geräte und ste llen Sie siche r , dass die Summe alle r Stromwe r te höchste ns zwei Dri ttel de s zugela ssenen We r ts de ...

  • Emerson MITX-430 - page 141

    Sicherheitshinweise MITX-430/MITX-440-DVI-2E In stallation and Use Guide (68 06800K37B) 141 Beschädigung de s Systems Hohe Luftfe uchtigk eit und K ondensat auf den Obe r flächen de r Produkte kann zu Kurzsch lüssen fü hren. Betreibe n Sie die Produkte nur innerhalb der angegebe nen Grenzwe r te für die rel ative Luftfeuc htigk eit un d T e mp ...

  • Emerson MITX-430 - page 142

    MITX-430/MIT X-440-DVI-2E Installation and Use Guid e (6806800K37 B) Sicherheitshinweise 142 F alls die ORing Dioden de s Produktes durchbre nnen, kann d as Produkt eine n Kurzschlus s zwische n den Ein gang sleitungen A und B v erursache n. In diesem F all ist Le itung A immer noch unter Spannung, auch wenn sie vom V ersorgungskreislauf getrennt i ...

  • Emerson MITX-430 - page 143

    Sicherheitshinweise MITX-430/MITX-440-DVI-2E In stallation and Use Guide (68 06800K37B) 143 Beschädigung de s Produktes Zu vie l Druck kann de n Rese t Schalt er be schädige n. Drücke n Sie den Rese t Schalter nur leicht. Erdung Beschädigung de s Produktes F alls da s Produkt nicht or dnungsge mäß geer det ist, kann es durc h ele ktrostatis c ...

  • Emerson MITX-430 - page 144

    MITX-430/MIT X-440-DVI-2E Installation and Use Guid e (6806800K37 B) Sicherheitshinweise 144 V erletz ung durch Stromsc hlag (W echselstromsyste me) Ist da s drei adrige Wech selstr omkabel nic ht ordentlic h angeschlos sen, könne n Sie einen S tromsch lag be komme n. Sie müssen da s dreiadrige W echselstromkabe l mit einer z ugela ssen Anschlus ...

  • Emerson MITX-430 - page 145

    Sicherheitshinweise MITX-430/MITX-440-DVI-2E In stallation and Use Guide (68 06800K37B) 145 Beschädigung de s Systems Ein ve r sehe ntliches En tferne n des Netzk abels währe nd des Betrieb s kann den Syst embe trieb beein trächtigen oder Schäde n am System v erursache n. Schlie ßen Sie ein v ersehe ntliches En tfe rnen des Netzkabe ls währen ...

  • Emerson MITX-430 - page 146

    MITX-430/MIT X-440-DVI-2E Installation and Use Guid e (6806800K37 B) Sicherheitshinweise 146 Fe hlfunktion des Produktes F alls Sie mehr als e ine serie lle Schnittst elle gle ichze itig anschl ieße n, könnt e da s Kon flikte hervorruf en und die se rielle Sc hnittste lle könnte nicht me hr richtig funktionie ren. Obwohl sow ohl an der F rontble ...

  • Emerson MITX-430 - page 147

    Sicherheitshinweise MITX-430/MITX-440-DVI-2E In stallation and Use Guide (68 06800K37B) 147 Ve r l e t z u n g s g e f a h r Sie könne n die PEMs nicht all ein d adurch sp annungsfre i sch alten , da ss Sie de n T re nnungssch alter an de n PEMs in di e OFF S tellun g stell en. Die PEM s blei ben un te r Spannung , bis die -48 V Sp annung von jede ...

  • Emerson MITX-430 - page 148

    MITX-430/MIT X-440-DVI-2E Installation and Use Guid e (6806800K37 B) Sicherheitshinweise 148 Besc hädigung des Produkte s Fe hlerhafte V erkabelun g kann das Pro dukt besc hädigen. V erbinde n Sie das 48 V Kabe l immer mit der "pos itivsten" Se ite. W enn die Stro mve r sorgung seinheit z um Beis piel -48 V und RETURN Anschlüs se besit ...

  • Emerson MITX-430 - page 149

    Sicherheitshinweise MITX-430/MITX-440-DVI-2E In stallation and Use Guide (68 06800K37B) 149 Beschädigung der Lüf ter W enn e in Lüf te rmodul außer Bet rieb ge nommen wir d, gleich t der Syste m Manage r das aus, in dem er di e Ge sch wi nd ig keit d er ver bl eib enden Lü f t er er hö ht . Wenn ein L üf ter über ein en längere n Zeitra um ...

  • Emerson MITX-430 - page 150

    MITX-430/MIT X-440-DVI-2E Installation and Use Guid e (6806800K37 B) Sicherheitshinweise 150 Ve r l e t z u n g s g e f a h r Rot ier en de L ü f t er s cha u fel n Sie könne n ve rletzt we rden, we nn Sie Werkz euge oder Finger in ro tieren de Lüf ter e inführen. Ber üh ren S i e di e Lü f ter sc haufel n er s t, wen n d ies e s ti ll steh e ...

  • Emerson MITX-430 - page 151

    Sicherheitshinweise MITX-430/MITX-440-DVI-2E In stallation and Use Guide (68 06800K37B) 151 Besc hädigung des Produkte s V erbogen e St ecke r oder lose T eile können das Produkt, die Backpl ane oder andere Systemk omponenten be schädigen. Prüfe n Sie da s Produkt und die Backplane vor de m Einaba u sorgfälti g auf ve rbogene S tecke r und los ...

  • Emerson MITX-430 - page 152

    MITX-430/MIT X-440-DVI-2E Installation and Use Guid e (6806800K37 B) Sicherheitshinweise 152 V erlu st der Sicherh eits- und EMC -Zula ssung W enn Sie z usätzlic he Produkte installie ren, könne n Sicherhe its- und EMC -Richtlinien v erletzt werden. Der Systemintegra tor ist für die Einhaltung dieser Richtlinien verantwor t lich. Beschädigung d ...

  • Emerson MITX-430 - page 153

    Sicherheitshinweise MITX-430/MITX-440-DVI-2E In stallation and Use Guide (68 06800K37B) 153 PMC Mo dule F ehlfunktion des Produkte s und/oder V erletz ungsgefahr W enn Sie nic htqualifi z ierte Module gemein sam mit dem Blade be nutze n, kann dies zu eine r Fe hlfunktion des Produktes, Sic herheitsrisik en und/ode r V erletz ungen führen. Sobald S ...

  • Emerson MITX-430 - page 154

    MITX-430/MIT X-440-DVI-2E Installation and Use Guid e (6806800K37 B) Sicherheitshinweise 154 V erletzungs gefahr der Augen Optische SF P/SFP +-Mod ule könn en Laserstra hlen aussenden, we nn kein Kabel angeschlossen ist. Blick en Si e dahe r nicht direkt in die Öffnung e ines SFP/SFP+-Moduls, um V erletz ungen de r Augen z u ve rmeiden. Besc häd ...

  • Emerson MITX-430 - page 155

    Sicherheitshinweise MITX-430/MITX-440-DVI-2E In stallation and Use Guide (68 06800K37B) 155 Datenver lus t W enn Sie e inen andere n Batte riet yp installieren als de r , der bei Au sliefe rung des Produktes installier t war , kann Daten verlust die Folge sein, da die neu installi erte Batterie für andere Umgebung sbedingungen ode r eine ande re L ...

  • Emerson MITX-430 - page 156

    MITX-430/MIT X-440-DVI-2E Installation and Use Guid e (6806800K37 B) Sicherheitshinweise 156 Umw eltsc hutz Umwe lt ve r schmutz ung F alsche Entsorgung der Produkte schadet der Umwelt. Entsor gen Sie alt e Produkte ge mäß der in Ihre m Land gültigen Gesetzge bung und den Empfehlungen des He rstellers. ...

  • Emerson MITX-430 - page 157

    MITX-430/MITX-440-DVI-2E In stallation and Use Guide (68 06800K37B) 157 A Advanced Menu 75 B BIOS Device 63 Block Diagram 57 board accessories 27 Board Layout 45 Board Therma l Management 37 Boot Menu 90 Boot Pr ocess 73 C Chipset 68 Chipset Menu 89 Clock Generator 69 comments and suggestions 18 Connectors 47 contact address 18 conventions 17 D Deb ...

  • Emerson MITX-430 - page 158

    Index MITX-430/M ITX-440-DVI-2E Insta llation and Use Guide (6 806800K37B) 158 T Thermal Req uirements 32 Trusted Platform Module 24 U USB Interface 61 V VGA, LVDS, LP C, and Audio Inter face 62 Video 69 W Watchdog Ti mer 71 weight 27 ...

  • Emerson MITX-430 - page 159

    ...

  • Emerson MITX-430 - page 160

    HOW TO R EACH LITERA TURE AND TEC HNICAL SUPPORT: Te m p e , A r i z o n a , U S A Munich, Germ any +49 89 9608 0 For lite rature , training, and technical assistance and support progra ms, visit www .emersonnetworkpowe rembedde dcomputi ng.com Emerso n, Business -Critica l Continui t y , Emerso n Net work Power and the Emerson Network Power logo a ...

Manufacturer Emerson Category Computer Hardware

Documents that we receive from a manufacturer of a Emerson MITX-430 can be divided into several groups. They are, among others:
- Emerson technical drawings
- MITX-430 manuals
- Emerson product data sheets
- information booklets
- or energy labels Emerson MITX-430
All of them are important, but the most important information from the point of view of use of the device are in the user manual Emerson MITX-430.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Emerson MITX-430, service manual, brief instructions and user manuals Emerson MITX-430. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Emerson MITX-430.

A complete manual for the device Emerson MITX-430, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Emerson MITX-430 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Emerson MITX-430.

A complete Emerson manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Emerson MITX-430 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Emerson MITX-430, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Emerson MITX-430, that we can find in the current document
3. Tips how to use the basic functions of the device Emerson MITX-430 - which should help us in our first steps of using Emerson MITX-430
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Emerson MITX-430
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Emerson MITX-430 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Emerson MITX-430?

Use the form below

If you did not solve your problem by using a manual Emerson MITX-430, ask a question using the form below. If a user had a similar problem with Emerson MITX-430 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)