Manual Cisco Systems SMNMADPTR

58 pages 0.5 mb
Download

Go to site of 58

Summary
  • Cisco Systems SMNMADPTR - page 1

    Americas Headquarters: © 20 08 Cisco Syst ems, Inc. All rights reserved. Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA Cisco Branch Routers Series Network Analysis Module (NME-NAM-120S) Installation and Configuration Note, 4.0 OL-14942-02 Revised Date: October 29, 2009 The Cisco Networ k Analysis Module (N AM) is an inte ...

  • Cisco Systems SMNMADPTR - page 2

    2 Cisco Branch Routers Series Network Analysis Module (N ME-NAM-120S) Installation an d Configuration Note, 4.0 OL-14942-02 Contents Contents • Prerequisites for NME-N AM-120S, page 2 • Restrictions for the NME-N AM-120S, page 4 • N AM Software, page 5 • Ho w to Install, Upgrade, or D ow ngrade NME-N AM-120S, page 7 • Config uring the NME ...

  • Cisco Systems SMNMADPTR - page 3

    3 Cisco Branch Routers Series Net work Analysis Module (NME-NAM-120S) Installation and Configuration Note, 4.0 OL-14942-02 Prerequisites for NME-NAM-120S Note The NM-N AM is not supported on ISR G2 platforms. T o determine which IOS release your router is currently running , examine the outpu t of the show v ersion command. Network Modules T o inst ...

  • Cisco Systems SMNMADPTR - page 4

    4 Cisco Branch Routers Series Network Analysis Module (N ME-NAM-120S) Installation an d Configuration Note, 4.0 OL-14942-02 Restrictions for the NME-NAM-120S – slot —Number of the router chassis slot for t he module. After you install t he module, you can get this in formation from the ro uter’ s show running-conf ig command output and look f ...

  • Cisco Systems SMNMADPTR - page 5

    5 Cisco Branch Routers Series Net work Analysis Module (NME-NAM-120S) Installation and Configuration Note, 4.0 OL-14942-02 NAM Software Monitoring Traffic Through Internal Interface Note The following restriction applies only to traff ic th at is monitored through the internal NAM interface. The N AM T raf f ic Analyzer (web GUI) provides Layer 3 a ...

  • Cisco Systems SMNMADPTR - page 6

    6 Cisco Branch Routers Series Network Analysis Module (N ME-NAM-120S) Installation an d Configuration Note, 4.0 OL-14942-02 NAM Software Hardware Interfaces The host router and network module use sev eral inte rfaces for internal and external communication (see Figure 1 ). Each interf ace is conf igurable both from the router b y using the Cisco IO ...

  • Cisco Systems SMNMADPTR - page 7

    7 Cisco Branch Routers Series Net work Analysis Module (NME-NAM-120S) Installation and Configuration Note, 4.0 OL-14942-02 How to Install, Upgrade, or Downgrade NME-NAM-120S How to Install, Upgrade, or Downgrade NME-NAM-120S This section contains the fo llo wing information: • Setting Up Netw ork Module Interf aces, page 7 • Closing a Session, ...

  • Cisco Systems SMNMADPTR - page 8

    8 Cisco Branch Routers Series Network Analysis Module (N ME-NAM-120S) Installation an d Configuration Note, 4.0 OL-14942-02 How to Install, Upgr ade, or Dow ngrade NME-NAM-120S DETAILED ST EPS Command or Action Purpose From the Host-Router CLI Step 1 enable Example: Router> enable Enters privileged EXEC mode on the host router . Enter your passw ...

  • Cisco Systems SMNMADPTR - page 9

    9 Cisco Branch Routers Series Net work Analysis Module (NME-NAM-120S) Installation and Configuration Note, 4.0 OL-14942-02 How to Install, Upgrade, or Downgrade NME-NAM-120S Examples The follo wing partial output from the sho w running-conf ig command shows how the interf aces are configured. interface Integrated-Service-engine1/0 ip address 10.0.0 ...

  • Cisco Systems SMNMADPTR - page 10

    10 Cisco Branch Routers Series Network Analysis Module (N ME-NAM-120S) Installation an d Configuration Note, 4.0 OL-14942-02 How to Install, Upgr ade, or Dow ngrade NME-NAM-120S Opening a Session This section descri bes ho w to open a session on the netw ork module. Note • Before you install your applicat ion software, opening a sessi on brings u ...

  • Cisco Systems SMNMADPTR - page 11

    11 Cisco Branch Routers Series Net work Analysis Module (NME-NAM-120S) Installation and Configuration Note, 4.0 OL-14942-02 How to Install, Upgrade, or Downgrade NME-NAM-120S Closing a Session This section descri bes ho w to close a session on the net work module. Note • Before you install your applicat ion software, opening a sessi on brings up ...

  • Cisco Systems SMNMADPTR - page 12

    12 Cisco Branch Routers Series Network Analysis Module (N ME-NAM-120S) Installation an d Configuration Note, 4.0 OL-14942-02 How to Install, Upgr ade, or Dow ngrade NME-NAM-120S Upgrading or Reinstalling NAM Software During software upgrades, yo u use the Bootloader , a small set of syst em software that runs when the system f irst po wers up. The ...

  • Cisco Systems SMNMADPTR - page 13

    13 Cisco Branch Routers Series Net work Analysis Module (NME-NAM-120S) Installation and Configuration Note, 4.0 OL-14942-02 How to Install, Upgrade, or Downgrade NME-NAM-120S Upgrading the NME-NAM-120S A pplication Image (Full Image) This section pro vides summary and d etailed steps about ho w to upgrade, downgrad e, or re-install the fu ll NME-N ...

  • Cisco Systems SMNMADPTR - page 14

    14 Cisco Branch Routers Series Network Analysis Module (N ME-NAM-120S) Installation an d Configuration Note, 4.0 OL-14942-02 How to Install, Upgr ade, or Dow ngrade NME-NAM-120S http://www .cisco.com/cgi-bin/t ableb uild.pl/nme- nam b. Locate the follo wing f ile: • nam-app.4.0.bin.gz NME-N AM-120S Application Image Release 4.0 for Cisco Branch R ...

  • Cisco Systems SMNMADPTR - page 15

    15 Cisco Branch Routers Series Net work Analysis Module (NME-NAM-120S) Installation and Configuration Note, 4.0 OL-14942-02 How to Install, Upgrade, or Downgrade NME-NAM-120S • Default bo ot option is to boot t he N AM 4.0 image from disk . • Default bo otloader f ile to be used on subsequent boot: primary or secondary Note Primary causes the a ...

  • Cisco Systems SMNMADPTR - page 16

    16 Cisco Branch Routers Series Network Analysis Module (N ME-NAM-120S) Installation an d Configuration Note, 4.0 OL-14942-02 How to Install, Upgr ade, or Dow ngrade NME-NAM-120S Example: Cisco Systems, Inc. Services engine helper utility for NME-NAM-120S Version 1.1(0.5) ----- Main menu 1 - Download application image and write to HDD 2 - Download a ...

  • Cisco Systems SMNMADPTR - page 17

    17 Cisco Branch Routers Series Net work Analysis Module (NME-NAM-120S) Installation and Configuration Note, 4.0 OL-14942-02 How to Install, Upgrade, or Downgrade NME-NAM-120S DETAILED ST EPS Upgrading the NAM He lper Image (NAM CLI) This section descri bes ho w to upgrade the N AM help er image stored on the NAM compact flash. The N AM must be runn ...

  • Cisco Systems SMNMADPTR - page 18

    18 Cisco Branch Routers Series Network Analysis Module (N ME-NAM-120S) Installation an d Configuration Note, 4.0 OL-14942-02 How to Install, Upgr ade, or Dow ngrade NME-NAM-120S DETAILED ST EPS Command or Action Purpose Step 1 Download the NME-NAM-120S helper image from CCO and load it to a FTP server. Note The FTP server must be reachable from N A ...

  • Cisco Systems SMNMADPTR - page 19

    19 Cisco Branch Routers Series Net work Analysis Module (NME-NAM-120S) Installation and Configuration Note, 4.0 OL-14942-02 How to Install, Upgrade, or Downgrade NME-NAM-120S Upgrading the NAM Helper Image This section descri bes ho w to upgrade the N AM helper image. SUMMARY STEPS 1. Download the N A M helper image fr om CCO and stor e it on an FT ...

  • Cisco Systems SMNMADPTR - page 20

    20 Cisco Branch Routers Series Network Analysis Module (N ME-NAM-120S) Installation an d Configuration Note, 4.0 OL-14942-02 How to Install, Upgr ade, or Dow ngrade NME-NAM-120S DETAILED ST EPS Command or Action Purpose Step 1 Download the NME-NAM-120S helper image from CCO and load it to an FTP server. Note The FTP server must be reachable from N ...

  • Cisco Systems SMNMADPTR - page 21

    21 Cisco Branch Routers Series Net work Analysis Module (NME-NAM-120S) Installation and Configuration Note, 4.0 OL-14942-02 Configuring the NME- NAM-120S for Management Configuring the NME-NAM-120S for Management NME-N AM-120S has an inter nal Gigabit Ethernet int erf ace and an external interf ace. Y ou can use either interfa ce for N AM managemen ...

  • Cisco Systems SMNMADPTR - page 22

    22 Cisco Branch Routers Series Network Analysis Module (N ME-NAM-120S) Installation an d Configuration Note, 4.0 OL-14942-02 Configuring the NME- NAM-120S for Management 4. ip unnumber <interface> <number> 5. no shutdown 6. service-module ip addr ess <NAM-Addr ess> <subnetmask> 7. service-module ip default-gatew ay <N AM- ...

  • Cisco Systems SMNMADPTR - page 23

    23 Cisco Branch Routers Series Net work Analysis Module (NME-NAM-120S) Installation and Configuration Note, 4.0 OL-14942-02 Configuring the NME- NAM-120S for Management Configuration Example In this conf iguration example: • The internal N AM interface is used for management traf fic. • IP addresses from the same routable subnet are assigned to ...

  • Cisco Systems SMNMADPTR - page 24

    24 Cisco Branch Routers Series Network Analysis Module (N ME-NAM-120S) Installation an d Configuration Note, 4.0 OL-14942-02 Configuring the NME- NAM-120S for Management Figur e 2 NAM Manag ement Int erf ace Is Inte r nal and Integr ated -Service-Engine Int erface Is IP Unnumber ed: Sample T opolog y Router Configuration (Cisco IOS Software) ! inte ...

  • Cisco Systems SMNMADPTR - page 25

    25 Cisco Branch Routers Series Net work Analysis Module (NME-NAM-120S) Installation and Configuration Note, 4.0 OL-14942-02 Configuring the NME- NAM-120S for Management NAM Configuration (NAM Software) root@myNAM.company.com# show ip IP address: 209.165.200.226 Subnet mask: 255.255.255.224 IP Broadcast: 209.165.200.255 IP Interface: Internal DNS Na ...

  • Cisco Systems SMNMADPTR - page 26

    26 Cisco Branch Routers Series Network Analysis Module (N ME-NAM-120S) Installation an d Configuration Note, 4.0 OL-14942-02 Configuring the NME- NAM-120S for Management Configuration Example In this conf iguration example: • The internal N AM interface is used for management traf fic. • IP addresses from the same routable subnet are assigned t ...

  • Cisco Systems SMNMADPTR - page 27

    27 Cisco Branch Routers Series Net work Analysis Module (NME-NAM-120S) Installation and Configuration Note, 4.0 OL-14942-02 Configuring the NME- NAM-120S for Management Figur e 3 NAM Manag ement Int erf ace Is Inter nal and Integrat ed-Ser vice-Engine Interf ace Is Assigned an I P Addr ess: Sample T o pology Router Configuration (Cisco IOS Software ...

  • Cisco Systems SMNMADPTR - page 28

    28 Cisco Branch Routers Series Network Analysis Module (N ME-NAM-120S) Installation an d Configuration Note, 4.0 OL-14942-02 Configuring the NME- NAM-120S for Management NAM Configuration (NAM Software) root@myNAM.company.com# show ip IP address: 209.165.200.226 Subnet mask: 255.255.255.224 IP Broadcast: 209.165.200.255 IP Interface: Internal DNS N ...

  • Cisco Systems SMNMADPTR - page 29

    29 Cisco Branch Routers Series Net work Analysis Module (NME-NAM-120S) Installation and Configuration Note, 4.0 OL-14942-02 Configuring the NME- NAM-120S for Management DETAILED ST EPS Command or Action Purpose Step 1 enable Enter IOS exec mode. Step 2 configure terminal Enter IOS conf iguration from termin al mode. Step 3 interface loopback <lo ...

  • Cisco Systems SMNMADPTR - page 30

    30 Cisco Branch Routers Series Network Analysis Module (N ME-NAM-120S) Installation an d Configuration Note, 4.0 OL-14942-02 Configuring the NME- NAM-120S for Management Configuration Example In this conf iguration example: • The external N AM interface is used for management traf fic. • The Integrated-Service-Engine interface is configured as ...

  • Cisco Systems SMNMADPTR - page 31

    31 Cisco Branch Routers Series Net work Analysis Module (NME-NAM-120S) Installation and Configuration Note, 4.0 OL-14942-02 Configuring the NME- NAM-120S for Management Figur e 4 NAM Manag ement In terf ace Is Exter nal and Int egrat ed-Service-Engine Interf ace Is IP Unnumber ed: Sample T opolog y Callout Interface Location 1 Integrated-Servi ce-E ...

  • Cisco Systems SMNMADPTR - page 32

    32 Cisco Branch Routers Series Network Analysis Module (N ME-NAM-120S) Installation an d Configuration Note, 4.0 OL-14942-02 Configuring the NME- NAM-120S for Management Router Configuration (Cisco IOS Software) ! interface loopback 0 ip address 10.1.1.1 255.255.255.0 ! ! interface Integrated-Service-Engine3/0 ip unnumbered loopback 0 no shutdown ! ...

  • Cisco Systems SMNMADPTR - page 33

    33 Cisco Branch Routers Series Net work Analysis Module (NME-NAM-120S) Installation and Configuration Note, 4.0 OL-14942-02 Configuring the NME- NAM-120S for Management DETAILED ST EPS Command or Action Purpose Step 1 enable Example: Router> enable Enables priv ileged EXEC mode. • Enter your password if pro mpted. Step 2 configure terminal Exa ...

  • Cisco Systems SMNMADPTR - page 34

    34 Cisco Branch Routers Series Network Analysis Module (N ME-NAM-120S) Installation an d Configuration Note, 4.0 OL-14942-02 Configuring the NME- NAM-120S For Network Connectivity Configuring the NME-NAM-120S For Network Connectivity This section descri bes ho w to conf igure the NME-NAM- 120S to establish netw ork connecti vity and configure IP pa ...

  • Cisco Systems SMNMADPTR - page 35

    35 Cisco Branch Routers Series Net work Analysis Module (NME-NAM-120S) Installation and Configuration Note, 4.0 OL-14942-02 Configuring the NME-NAM-120S Fo r Network Conne ctivity DETAILED ST EPS Command or Action Purpose Step 1 ip interface { internal | external } Example: root@localhost# ip interface internal Example: root@localhost# ip interface ...

  • Cisco Systems SMNMADPTR - page 36

    36 Cisco Branch Routers Series Network Analysis Module (N ME-NAM-120S) Installation an d Configuration Note, 4.0 OL-14942-02 Configuring the NME- NAM-120S For Network Connectivity Examples This section provides the follo wing e xamples: • Config uring the NME-N AM-120S, page 36 • Checking Network Connecti vity with Ping, page 37 • Sample Outp ...

  • Cisco Systems SMNMADPTR - page 37

    37 Cisco Branch Routers Series Net work Analysis Module (NME-NAM-120S) Installation and Configuration Note, 4.0 OL-14942-02 Configuring the NME-NAM-120S Fo r Network Conne ctivity Checking Network Connectivity with Ping root@myNAM.company.com# ping 172.20.98.129 PING 172.20.98.129 (172.20.98.129) 56(84) bytes of data. 64 bytes from 172.20.98.129: i ...

  • Cisco Systems SMNMADPTR - page 38

    38 Cisco Branch Routers Series Network Analysis Module (N ME-NAM-120S) Installation an d Configuration Note, 4.0 OL-14942-02 Configuring the NME- NAM-120S For Network Connectivity SUMMARY STEPS 1. enable 2. conf igure terminal 3. ip cef 4. interfac e type slot / port or interfac e type slot / wic-slot / port 5. analysis-module monitoring 6. Repeat ...

  • Cisco Systems SMNMADPTR - page 39

    39 Cisco Branch Routers Series Net work Analysis Module (NME-NAM-120S) Installation and Configuration Note, 4.0 OL-14942-02 Configuring the NME-NAM-120S Fo r Network Conne ctivity Examples This section provides the follo wing e xample: • Enabling NAM Packet Monitoring, page 39 Enabling NAM Packet Monitoring In the follo wing e xample, N AM packet ...

  • Cisco Systems SMNMADPTR - page 40

    40 Cisco Branch Routers Series Network Analysis Module (N ME-NAM-120S) Installation an d Configuration Note, 4.0 OL-14942-02 Configuring the NME- NAM-120S For Network Connectivity Enabling and Accessing the NAM Traffic Analyzer This section describes how to enable a nd access the N AM Traf f ic Analyzer (web GUI). Prerequisites • Ensure that your ...

  • Cisco Systems SMNMADPTR - page 41

    41 Cisco Branch Routers Series Net work Analysis Module (NME-NAM-120S) Installation and Configuration Note, 4.0 OL-14942-02 Configuring the NME-NAM-120S Fo r Network Conne ctivity DETAILED ST EPS Command or Action Purpose Step 1 Open a N A M console session from the rout er . See the “Closing a Session” section on page 11 . or Open a T elnet or ...

  • Cisco Systems SMNMADPTR - page 42

    42 Cisco Branch Routers Series Network Analysis Module (N ME-NAM-120S) Installation an d Configuration Note, 4.0 OL-14942-02 Configuring the NME- NAM-120S For Network Connectivity Examples This section provides the follo wing e xamples: • Enabling the N AM T raf fic Analyzer , page 42 • Accessing the NA M T raff ic A nalyzer , pa ge 42 Enabling ...

  • Cisco Systems SMNMADPTR - page 43

    43 Cisco Branch Routers Series Net work Analysis Module (NME-NAM-120S) Installation and Configuration Note, 4.0 OL-14942-02 Configuring the NME-NAM-120S Fo r Network Conne ctivity What to Do Next For information on the N AM Traf f ic Analyzer , se e the User Guide for the Network Analysis Modu le T raf f ic Analyzer for your N AM software release. ...

  • Cisco Systems SMNMADPTR - page 44

    44 Cisco Branch Routers Series Network Analysis Module (N ME-NAM-120S) Installation an d Configuration Note, 4.0 OL-14942-02 Configuring the NME- NAM-120S For Network Connectivity Examples This section provides the follo wing e xamples: • Changing the N AM Root Password, page 44 • V erifyin g the N AM Root Password, p age 44 Changing the NAM Ro ...

  • Cisco Systems SMNMADPTR - page 45

    45 Cisco Branch Routers Series Net work Analysis Module (NME-NAM-120S) Installation and Configuration Note, 4.0 OL-14942-02 Configuring the NME-NAM-120S Fo r Network Conne ctivity DETAILED ST EPS Troubleshooting Tips If you ha ve trouble opening a N AM console session from the router , ensure that the N AM console line is clear by entering the serv ...

  • Cisco Systems SMNMADPTR - page 46

    46 Cisco Branch Routers Series Network Analysis Module (N ME-NAM-120S) Installation an d Configuration Note, 4.0 OL-14942-02 Configuring the NME- NAM-120S For Network Connectivity – From the N AM CLI, ping the NA M system default g ate way . Telnet Prerequisites • Enter the exsession on N AM CLI command. See Step 5 of the “Conf iguring the NM ...

  • Cisco Systems SMNMADPTR - page 47

    47 Cisco Branch Routers Series Net work Analysis Module (NME-NAM-120S) Installation and Configuration Note, 4.0 OL-14942-02 Configuring the NME-NAM-120S Fo r Network Conne ctivity Examples This section provides the follo wing e xamples: • Opening and Closing a T elnet Session to the N AM Using the N AM System IP Address, page 47 • Opening and C ...

  • Cisco Systems SMNMADPTR - page 48

    48 Cisco Branch Routers Series Network Analysis Module (N ME-NAM-120S) Installation an d Configuration Note, 4.0 OL-14942-02 Configuring the NME- NAM-120S For Network Connectivity Opening and Closing an SSH Session to the NAM Using the NAM System Hostname host [/home/user] ssh -l root nmnam2 root@nmnam2’s password: <password> Terminal type: ...

  • Cisco Systems SMNMADPTR - page 49

    49 Cisco Branch Routers Series Net work Analysis Module (NME-NAM-120S) Installation and Configuration Note, 4.0 OL-14942-02 Configuring the NME-NAM-120S Fo r Network Conne ctivity T able 3 Common Shutdo wn and Startup Commands Configuration Mode Command Purpose Router# service-module integrated-ser vice-engine slot /0 reload (or for the NM-N AM) se ...

  • Cisco Systems SMNMADPTR - page 50

    50 Cisco Branch Routers Series Network Analysis Module (N ME-NAM-120S) Installation an d Configuration Note, 4.0 OL-14942-02 Configuring the NME- NAM-120S For Network Connectivity Verifying System Status T o verify the status of an instal lation, upgrade, or do wngrade or to troubleshoot problems, use commands as needed from the follo wing list of ...

  • Cisco Systems SMNMADPTR - page 51

    51 Cisco Branch Routers Series Net work Analysis Module (NME-NAM-120S) Installation and Configuration Note, 4.0 OL-14942-02 Configuring the NME-NAM-120S Fo r Network Conne ctivity Configuring Logging Options and Generating Diagnostics T o configure loggi ng options for NME-N AM-120S, use commands as needed from the list of common network modu le co ...

  • Cisco Systems SMNMADPTR - page 52

    52 Cisco Branch Routers Series Network Analysis Module (N ME-NAM-120S) Installation an d Configuration Note, 4.0 OL-14942-02 Additional References Additional References The follo wing sections p rovide r eferences related to the NME-N AM-120S features. T able 7 Related Docum entation show trace buff er Displays the contents of the trace buf fer . s ...

  • Cisco Systems SMNMADPTR - page 53

    53 Cisco Branch Routers Series Net work Analysis Module (NME-NAM-120S) Installation and Configuration Note, 4.0 OL-14942-02 Additional References MIBs RFCs MIBs MIBs Link Router MIBs : • CISCO-ENTITY -VE NDOR TYPE-OID-MIB Network Analy sis Module (N AM) MIBs: • AR T -MIB • DSMON-MIB • HC-RMON-MIB • MIB-II • RMON-MIB • RMON2-MIB • SM ...

  • Cisco Systems SMNMADPTR - page 54

    54 Cisco Branch Routers Series Network Analysis Module (N ME-NAM-120S) Installation an d Configuration Note, 4.0 OL-14942-02 Additional References Technical Assistance Feature Information for Network Analysis Module For info rmation on a feature in this technology that is not documented here, see the Cisco N etwork Analysis Module Softwar e documen ...

  • Cisco Systems SMNMADPTR - page 55

    55 Cisco Branch Routers Series Net work Analysis Module (NME-NAM-120S) Installation and Configuration Note, 4.0 OL-14942-02 Glossary Glossary AAA Authentication, authorizat ion, and accounting, pron ounced triple A . access list A list kept by routers to control access to or from the router for a number of services (for example, to pre vent pack et ...

  • Cisco Systems SMNMADPTR - page 56

    56 Cisco Branch Routers Series Network Analysis Module (N ME-NAM-120S) Installation an d Configuration Note, 4.0 OL-14942-02 Glossary MIB Manageme nt Information Base. D atabase of network ma nagement information that i s used and maintained by a netw ork management protocol , such as SNMP or Common Management Information Prot ocol (CMIP). The v al ...

  • Cisco Systems SMNMADPTR - page 57

    57 Cisco Branch Routers Series Net work Analysis Module (NME-NAM-120S) Installation and Configuration Note, 4.0 OL-14942-02 Glossary Note For terms not included in this gl o ssary , see the follo wing references: • Cisco IOS V oice Conf iguration Libr ary Glossary • Internetworking T erms and Acr onyms CCDE, CCENT , CCSI, Cisco Eos, Cisco Healt ...

  • Cisco Systems SMNMADPTR - page 58

    58 Cisco Branch Routers Series Network Analysis Module (N ME-NAM-120S) Installation an d Configuration Note, 4.0 OL-14942-02 Glossary ...

Manufacturer Cisco Systems Category Router

Documents that we receive from a manufacturer of a Cisco Systems SMNMADPTR can be divided into several groups. They are, among others:
- Cisco Systems technical drawings
- SMNMADPTR manuals
- Cisco Systems product data sheets
- information booklets
- or energy labels Cisco Systems SMNMADPTR
All of them are important, but the most important information from the point of view of use of the device are in the user manual Cisco Systems SMNMADPTR.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Cisco Systems SMNMADPTR, service manual, brief instructions and user manuals Cisco Systems SMNMADPTR. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Cisco Systems SMNMADPTR.

A complete manual for the device Cisco Systems SMNMADPTR, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Cisco Systems SMNMADPTR by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Cisco Systems SMNMADPTR.

A complete Cisco Systems manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Cisco Systems SMNMADPTR - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Cisco Systems SMNMADPTR, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Cisco Systems SMNMADPTR, that we can find in the current document
3. Tips how to use the basic functions of the device Cisco Systems SMNMADPTR - which should help us in our first steps of using Cisco Systems SMNMADPTR
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Cisco Systems SMNMADPTR
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Cisco Systems SMNMADPTR in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Cisco Systems SMNMADPTR?

Use the form below

If you did not solve your problem by using a manual Cisco Systems SMNMADPTR, ask a question using the form below. If a user had a similar problem with Cisco Systems SMNMADPTR it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)