English dropdown-ico

Manual Fujitsu CELSIUS W370

67 pages Not applicable
Download

Go to site of 67

Summary
  • Fujitsu CELSIUS W370 - page 1

    CELSIUS W370 Operating Manual ...

  • Fujitsu CELSIUS W370 - page 2

    Are there ... ... any technical problems or other ques tions that you w ould like help with? Please contact: ● our Hotline/Help Desk (see the enclosed Help Desk List or look us up on the Internet: http://ts.fujitsu.com/support/helpdesk.html ) ● your sales partner ● Your sales office Further information can be found in the "Safety" a ...

  • Fujitsu CELSIUS W370 - page 3

    ...

  • Fujitsu CELSIUS W370 - page 4

    Published by Fujitsu T echnology Solutions GmbH A26361-K1000-Z221-1-7619, Edition 2 2009/08 Produced by XEROX Global Services ...

  • Fujitsu CELSIUS W370 - page 5

    CELSIUS W370 Operating Manual Introduction Important notes Preparing for use Operation Troubleshooting and tips System upgrades Technical data Index August 2009 edition ...

  • Fujitsu CELSIUS W370 - page 6

    CELSIUS is a registered trademark of Fujitsu Technology Solutions GmbH. Windows XP, Windows Vista and Windows 7 ar e registered trademarks of Microsoft Corporation. PS/2 is a registered trademark of Inte rnational Business Machines, Inc. Pentium is a registered trademark of Intel Corporation, USA. Kensington and MicroSaver are registered trademarks ...

  • Fujitsu CELSIUS W370 - page 7

    A26361-K1000-Z221-1-7619, edition 2 Contents Your CELSIUS … ................................................................................................................................ 1 Notational conventions ......................................................................................................... ................ 2 Important ...

  • Fujitsu CELSIUS W370 - page 8

    Contents A26361-K1000-Z221-1-7619, edition 2 System upgrades ................................................................................................................ .............. 31 Information about boards .................................................................................................................... 31 Opening the c ...

  • Fujitsu CELSIUS W370 - page 9

    A26361-K1000-Z221-1-7619, edition 2 1 Your CELSIUS … ... is available with various c onfiguration levels with different hardware and software. Y ou can incorporate operable drives (for exampl e DVD drive) as well as other boards. This manual tells you how to put y our device into operation and how to operate it in daily use. This manual applies f ...

  • Fujitsu CELSIUS W370 - page 10

    Your CELSIUS … 2 A26361-K1000-Z221-1-7619, edition 2 Notational conventions The meanings of the symbols and fonts used in this manual are as follows: ! This symbol indicates information whic h is important for y our health or for preventing material damage. i This symbol indicates important info rmation which is required to use the system properl ...

  • Fujitsu CELSIUS W370 - page 11

    A26361-K1000-Z221-1-7619, edition 2 3 Important notes In this chapter you will find information regarding sa fety which it is essential to take note of when working with your device. Safety notes ! Pay attention to the information provided in the "Safety" manual and in the follow ing safety notes. During installing and operating the devic ...

  • Fujitsu CELSIUS W370 - page 12

    Important notes 4 A26361-K1000-Z221-1-7619, edition 2 Energy saving, disposal and recy cling Further information can be found on the "User Documentation" or "Drivers & Utilities" CD/DVD provided with your computer. CE marking The shipped version of this device complies with the requirements of the EC Guidelines 2004/108/EC & ...

  • Fujitsu CELSIUS W370 - page 13

    A26361-K1000-Z221-1-7619, edition 2 5 Preparing for use ! Please observe the safety information in the " Important notes" chapter. Unpacking and checking the delivery It is recommended not to throw away the origi nal packaging material! It may be required for reshipment at some later date. ► Unpack all the individual parts. ► Check th ...

  • Fujitsu CELSIUS W370 - page 14

    Preparing for use 6 A26361-K1000-Z221-1-7619, edition 2 Setting up the device ! When installing your device, please read t he recommendations and safety notes in the "Safety" manual. Set up the device only in its correct orientation (vertical position). We recommend that you place your device on a surface w ith good anti-slip qualities. I ...

  • Fujitsu CELSIUS W370 - page 15

    Preparing for use A26361-K1000-Z221-1-7619, edition 2 7 Disconnecting cables ● Turn off all power and equipment switches. ● Remove all power plugs from the mains outlets. ● Unplug all data communication cables from the utility sockets. ● Unplug all cables from the device and peripherals. i USB devices are hot-pluggable. This means you can c ...

  • Fujitsu CELSIUS W370 - page 16

    Preparing for use 8 A26361-K1000-Z221-1-7619, edition 2 Connecting the monitor ► Follow the instructions contained in the moni tor manual to prepare the monitor for operation (e.g. connecting cables). ► Plug the data cable into the monitor port of the device. 1 2 ► Depending on your device configuration level, pl ug the monitor power cable in ...

  • Fujitsu CELSIUS W370 - page 17

    Preparing for use A26361-K1000-Z221-1-7619, edition 2 9 Connecting the mouse Depending on the equipment level selected, your device will be supplied with a USB mouse or a PS/2 mouse. Connecting a USB mouse ► Connect the USB mouse to one of the USB ports on the device. Connecting a PS/2 mouse ► Connect the PS/2 mouse to the PS/2 mouse port of th ...

  • Fujitsu CELSIUS W370 - page 18

    Preparing for use 10 A26361-K1000-Z221-1-7619, edition 2 Connecting external devices to the parallel or serial port External devices can be connected to the parallel or serial port (e.g. a printer or a modem). ► Connect the data cable to the external device. ► Depending on the device, connect the data cable to the parallel port or the serial po ...

  • Fujitsu CELSIUS W370 - page 19

    Preparing for use A26361-K1000-Z221-1-7619, edition 2 11 Connecting the device to the mains voltage i On devices without a voltage selector switch , the voltage supply is automatically adjusted to the mains voltage. On devices with a voltage selector switch (sliding switch, plug-in element) y ou will need to manually select the correct voltage rati ...

  • Fujitsu CELSIUS W370 - page 20

    Preparing for use 12 A26361-K1000-Z221-1-7619, edition 2 2 1 ► Connect the power cable to the device (1). ► Plug the power plug into a grounded mains outlet (2). Switching on for the first time: installing the software If the device is integrated into a network, the user and server details as well as the network protocol are required during the ...

  • Fujitsu CELSIUS W370 - page 21

    Preparing for use A26361-K1000-Z221-1-7619, edition 2 13 Switching on monitor and device ► Switch the monitor on (see the operating manual for the monitor). ► Switch the device on. To do this, follow the instructions below. i Depending on the version, the device may be equipped with a main power sw itch on the back of the device in addition to ...

  • Fujitsu CELSIUS W370 - page 22

    Preparing for use 14 A26361-K1000-Z221-1-7619, edition 2 Switching on the device (w ithout main power sw itch) ► Press the ON/OFF switch on the right hand side of the device. The device starts. Installing the software ► During installation, follow the on-screen instructions. ► Consult the operating system manual if anythi ng is unclear about ...

  • Fujitsu CELSIUS W370 - page 23

    A26361-K1000-Z221-1-7619, edition 2 15 Operation Switch the device on ► If necessary, switch the monitor on (s ee the operating manual for the monitor). ► Switch on the device with the main power sw itch located on the rear of the device (if present). ► Press the ON/OFF switch on the right hand side of the device. The device starts. Switching ...

  • Fujitsu CELSIUS W370 - page 24

    Operation 16 A26361-K1000-Z221-1-7619, edition 2 Indicators provided by the device The indicators are on the front of the casing. Wh ich indicators are available on your device depends on the configuration level you have selected. 3 1 2 1 = LCD 3 = Power-on indicator 2 = Drive indicator, e.g. DVD LCD The LCD lights up as soon as the workstation is ...

  • Fujitsu CELSIUS W370 - page 25

    Operation A26361-K1000-Z221-1-7619, edition 2 17 Message when software that supports this function is used, the appearance of this symbol on the display indicates that an incoming message (mail, fax) is waiting. Appears on the LCD when an incoming message (mail, fax) is waiting. This symbol only appears if you use softw are t hat supports this func ...

  • Fujitsu CELSIUS W370 - page 26

    Operation 18 A26361-K1000-Z221-1-7619, edition 2 Enter key confirms the marked selection. The enter key is also referred to as the "Return" key. Start key calls up the Windows Start menu. Menu key invokes the menu for the marked item (Windows). Shift key enables upper-case letters and the upper key symbols to be used. Al t Gr Alt Gr (e.g. ...

  • Fujitsu CELSIUS W370 - page 27

    Operation A26361-K1000-Z221-1-7619, edition 2 19 Settings in BIOS Setup In BIOS Setup you can set the system functions and the hardware configuration of the device. When the PC is delivered, the default entries are va lid (see "BIOS Setup" manual or manual for the mainboard). You can customise these se ttings to your requirements in the B ...

  • Fujitsu CELSIUS W370 - page 28

    Operation 20 A26361-K1000-Z221-1-7619, edition 2 Anti-theft protection and lead-sealing 1 2 1 = Holes for padlock 2 = Device for "Kensington Lock" Anti-theft protection You can protect your device from theft. ● with the Kensington Lock device (2 ) and with a Kensington MicroSaver. Consult the manual for your Kensington Lock. ● with th ...

  • Fujitsu CELSIUS W370 - page 29

    Operation A26361-K1000-Z221-1-7619, edition 2 21 Access authorization via SmartCard In systems equipped with a SmartCard reader, acce ss can be restricted to those users w ho have a corresponding SmartCard. Access protection with SystemLock With SystemLock you can protect your sy stem from unaut horised booting. Then a system can only be booted whe ...

  • Fujitsu CELSIUS W370 - page 30

    Operation 22 A26361-K1000-Z221-1-7619, edition 2 ...

  • Fujitsu CELSIUS W370 - page 31

    A26361-K1000-Z221-1-7619, edition 2 23 Troubleshooting and tips ! Refer to the safety notes in the "Safety" manual and in the " Preparing for use" chapter when connecting or di sconnecting cables. If a fault occurs, try to correct it as described in the following places: ● in this chapter ● in the documentation of the connec ...

  • Fujitsu CELSIUS W370 - page 32

    Troubleshooting and tips 24 A26361-K1000-Z221-1-7619, edition 2 Troubleshooting The device cannot be switched off w ith the ON/OFF switch. Cause Troubleshooting The device has not been switched on with the ON/OFF switch. ► Press the ON/OFF switch again. System crash ► Press the ON/OFF switch for at least 4 seconds, until the device switches off ...

  • Fujitsu CELSIUS W370 - page 33

    Troubleshooting and tips A26361-K1000-Z221-1-7619, edition 2 25 Monitor remains blank Cause Troubleshooting Monitor is switched off. ► Switch your monitor on. Power saving has been activated (monitor is blank). ► Press any key on the key board. or ► Deactivate the screen saver. If necessary, enter the appropriate password. Brightness controls ...

  • Fujitsu CELSIUS W370 - page 34

    Troubleshooting and tips 26 A26361-K1000-Z221-1-7619, edition 2 Cause Troubleshooting Wrong monitor has been set under Windows 2000 ► Restart the device. ► If the message Starting Windows appears, press function key F8 The Windows 2000 Advanced Options Menu appears. ► Select Safe Mode or Safe Mode with Network . ► Set the correct values for ...

  • Fujitsu CELSIUS W370 - page 35

    Troubleshooting and tips A26361-K1000-Z221-1-7619, edition 2 27 No mouse pointer displayed on the screen Cause Troubleshooting The mouse is not correctly connected. ► Shut down the operating system properly . ► Switch the device off. ► Check that the mouse cable is properly connected to the system unit. If you use an adapter or extension lead ...

  • Fujitsu CELSIUS W370 - page 36

    Troubleshooting and tips 28 A26361-K1000-Z221-1-7619, edition 2 Time and/or date is not correct Cause Troubleshooting Time and date are incorrect. ► Set the correct time and date within the operating system you are using. or ► Set the correct time and/or date in the BIOS Setup . The on-board backup battery in the device is flat. ► If the time ...

  • Fujitsu CELSIUS W370 - page 37

    Troubleshooting and tips A26361-K1000-Z221-1-7619, edition 2 29 Tips Topic Tip Out of system resources If you have too many applications running at once, y ou may experience problems due to a lack of system resources. ► Close unnecessary applications. or ► Run the applications in a different order. Other manuals Additional manuals are provided ...

  • Fujitsu CELSIUS W370 - page 38

    Troubleshooting and tips 30 A26361-K1000-Z221-1-7619, edition 2 ...

  • Fujitsu CELSIUS W370 - page 39

    A26361-K1000-Z221-1-7619, edition 2 31 System upgrades i As the device has to be shut down in or der to install/deinstall system hardware components, it is a good idea to print out t he relevant sections of this chapter. It may be necessary to update the BIOS w hen carrying out a system expansion or hardware upgrade. Additional information is conta ...

  • Fujitsu CELSIUS W370 - page 40

    System upgrade s 32 A26361-K1000-Z221-1-7619, edition 2 Opening the casing ► Switch the device off. The device mu st not be in the energy-saving mode! ! Please observe the safety information in the " Important notes" chapter. Disconnect the mains plug from the mains outlet. Only insert the power plug after y ou have closed the casing. ? ...

  • Fujitsu CELSIUS W370 - page 41

    System upgrade s A26361-K1000-Z221-1-7619, edition 2 33 Closing the casing 1 ► Insert the side part in the guide rail on the lower part of the casing. ► Swivel the side part in the direction of the arrow (1) until it engages. ► On devices with a casing lock: Lock the casing. ► Reconnect the cables that you disconnected before. ...

  • Fujitsu CELSIUS W370 - page 42

    System upgrade s 34 A26361-K1000-Z221-1-7619, edition 2 Installing the locking device with casing lock Removing the locking dev ice 1 1 2 ► Open the casing (see " Opening the casing"). ► Place the removed side part on a flat surface with the inside facing upwards. ► Press the catch in the direction of the arrow (1). ► Carefully th ...

  • Fujitsu CELSIUS W370 - page 43

    System upgrade s A26361-K1000-Z221-1-7619, edition 2 35 Installing the locking device with casing lock 2 2 3 1 ► Turn the removed side part over (so that the outside faces upwards). ► Guide the locking device with the casing lock in t he direction of the arrow (1) into the side part. ► Press the catch in the direction of the arrow (2) and, at ...

  • Fujitsu CELSIUS W370 - page 44

    System upgrade s 36 A26361-K1000-Z221-1-7619, edition 2 Opening the drive cage ► Open the casing (see " Opening the casing"). 2 1 ► Unscrew the knurled screw (1). ► Fold open the drive cage (2). i Thanks to the integrated torque controller the drive cage will stop in any position. ...

  • Fujitsu CELSIUS W370 - page 45

    System upgrade s A26361-K1000-Z221-1-7619, edition 2 37 Closing the drive cage 2 1 ► Fold down the drive cage (1). Be careful that no wires become trapped. ► Secure the drive cage with the knurled screw (2). ► Close the casing (see " Closing the casing"). ...

  • Fujitsu CELSIUS W370 - page 46

    System upgrade s 38 A26361-K1000-Z221-1-7619, edition 2 Removing ventilation duct i When removing the ventilation duct, be careful not to damage the processor cooler on the mainboard. 1 2 ► Open the casing (see " Opening the casing"). ► Fold up the drive cage (see " Opening the drive cage"). ► Unhook the wires from the hol ...

  • Fujitsu CELSIUS W370 - page 47

    System upgrade s A26361-K1000-Z221-1-7619, edition 2 39 Installing ventilation duct i When installing the ventilation duct, be careful not to damage the processor cooler on the mainboard. 1 ► Insert the latches on the underside of the vent ilation duct into the corresponding slots in the casing. ► Press the ventilation duct into the casing in t ...

  • Fujitsu CELSIUS W370 - page 48

    System upgrade s 40 A26361-K1000-Z221-1-7619, edition 2 Installing and removing a board ! Please take note of the section " Information about boards". When installing new boards, make sure that they do not interfere with ex isting boards. The number, position and arrangement of the board slots on the mainboard can be found in the manual f ...

  • Fujitsu CELSIUS W370 - page 49

    System upgrade s A26361-K1000-Z221-1-7619, edition 2 41 2 1 ► Push the board into the slot (1). ► Press on the retaining clip until it noticeable engages (2). ► If necessary also secure the board with a screw. ► If necessary, connect the cables to the board. ► Fold down the drive cage (see " Closing the drive cage"). ► Close t ...

  • Fujitsu CELSIUS W370 - page 50

    System upgrade s 42 A26361-K1000-Z221-1-7619, edition 2 Removing boards ► Open the casing (see " Opening the casing"). ► Fold up the drive cage (see " Opening the drive cage"). ► Disconnect the cables connected to the board. 1 2 ► Press on the curved part of the retaining clip (1). ► If you have also secured the board ...

  • Fujitsu CELSIUS W370 - page 51

    System upgrade s A26361-K1000-Z221-1-7619, edition 2 43 ► Press on the retaining clip until it noticeable engages (2). ► Fold down the drive cage (see " Closing the drive cage"). ► Close the casing (see " Closing the casing"). i If you have installed or removed a PCI board, please check the relevant PCI slot settings in th ...

  • Fujitsu CELSIUS W370 - page 52

    System upgrade s 44 A26361-K1000-Z221-1-7619, edition 2 Low-profile boards You will need to fit a corresponding slot adapter first before y ou can install a low-profile board in a normal board slot. Two-piece board slot covers are fitted to the slot s intended for low-profile boards. The two pieces are connected together with a screw. ► Remove th ...

  • Fujitsu CELSIUS W370 - page 53

    System upgrade s A26361-K1000-Z221-1-7619, edition 2 45 Installing and removing drives The PC casing can accommodate a total of five drives: ● four accessible drives (two 5 1/4 inch drives and two 3 1/2 inch drives) ● two non-accessible drives (both 3 1/2 inch drives with half installation height) "Accessible drives" are e.g. DVD or C ...

  • Fujitsu CELSIUS W370 - page 54

    System upgrade s 46 A26361-K1000-Z221-1-7619, edition 2 2 1 ► If you are not installing a new drive, slide the em pty slide-in module as far as it w ill go into the casing (1). ► Press on the retaining clip (2) and, at the same time, slide it up slightly. ► Close the casing (see " Closing the casing"). i It may be necessary to modif ...

  • Fujitsu CELSIUS W370 - page 55

    System upgrade s A26361-K1000-Z221-1-7619, edition 2 47 Installing an accessible drive ► Open the casing (see " Opening the casing"). ► If a slide-in module is fitted, remove this fi rst. To do this, proceed in the same way as when removing an accessible drive (see " Removing an accessible drive"). ! Do not dispose of the em ...

  • Fujitsu CELSIUS W370 - page 56

    System upgrade s 48 A26361-K1000-Z221-1-7619, edition 2 Installing and removing the floppy disk drive ► Open the casing (see " Opening the casing"). 2 1 ► Remove the data and power supply connec tors from the floppy disk drive. ► Remove the screws (1) on the right side of the floppy disk drive. ► Slide the floppy disk drive out of ...

  • Fujitsu CELSIUS W370 - page 57

    System upgrade s A26361-K1000-Z221-1-7619, edition 2 49 Installing and removing the hard disk drive Removing a hard disk drive ► Open the casing (see " Opening the casing"). ► Fold up the drive cage (see " Opening the drive cage"). 1 2 1 ► Slightly press together the EasyChange rails mounted on the hard disk (1) and pull t ...

  • Fujitsu CELSIUS W370 - page 58

    System upgrade s 50 A26361-K1000-Z221-1-7619, edition 2 ► Close the casing (see "Closing the casing"). Hard disk drive: installing ► Open the casing (see " Opening the casing "). ► Fold up the drive cage (see " Opening the drive cage"). i EasyChange rails for any additional hard disk drives are mounted on the dri ...

  • Fujitsu CELSIUS W370 - page 59

    System upgrade s A26361-K1000-Z221-1-7619, edition 2 51 1 ► Slide the hard disk drive with the EasyChange rails in the direction of the arrow (1) into the drive cage. Check that the component side of the hard disk drive faces inwards towards the casing. ► Fold down the drive cage (see " Closing the drive cage"). ► Close the casing ( ...

  • Fujitsu CELSIUS W370 - page 60

    System upgrade s 52 A26361-K1000-Z221-1-7619, edition 2 Mainboard expansions Details on how you can upgrade the main memory or the processor of your device are provided in the manual for the mainboard. Main memory, upgrading ► Open the casing (see " Opening the casing"). ► Fold up the drive cage (see " Opening the drive cage" ...

  • Fujitsu CELSIUS W370 - page 61

    System upgrade s A26361-K1000-Z221-1-7619, edition 2 53 Replacing the lithium battery In order to permanently save the system informati on, a lithium battery is installed to provide the CMOS-memory with a current. A corresponding erro r message notifies the user when the charge is too low or the battery is empty . The lithium battery must then be r ...

  • Fujitsu CELSIUS W370 - page 62

    System upgrade s 54 A26361-K1000-Z221-1-7619, edition 2 ...

  • Fujitsu CELSIUS W370 - page 63

    A26361-K1000-Z221-1-7619, edition 2 55 Technical data Electrical data Regulations complied with: IEC 60950-1, EN 60950-1, UL 60950 CSA 22.2 No.60950-1 Protection class: I Rated voltage range: 100 V – 240 V Frequency: 50 Hz – 60 Hz Maximum rated current or: 100 V – 240 V / 5.0 A – 2.5 A Maximum rated current (casing with monitor socket) 100 ...

  • Fujitsu CELSIUS W370 - page 64

    Technical data 56 A26361-K1000-Z221-1-7619, edition 2 ...

  • Fujitsu CELSIUS W370 - page 65

    A26361-K1000-Z221-1-7619, edition 2 57 Index A Accessible drive installing 47 removing 45 Alphanumeric keypad 17 Anti-theft protection 20 Audio input 7 Audio output 7 B Battery 53 BIOS Setup 19 security functions 20 settings 19 System settings 19 Board 31 installing 40 removing 42 C Cables connecting 6 disconnecting 7 Casing closing 33 lead-sealing ...

  • Fujitsu CELSIUS W370 - page 66

    Index 58 A26361-K1000-Z221-1-7619, edition 2 mainboard 52 External devices connecting 6, 10 ports 7 F Fault mouse 27 Fault date 28 mouse 27 screen 25 time 28 FireWire 7 First time switching on 12, 13 First-time setup 5 Floppy disk drive removing 45, 48 Function keys 17 G Guarantee coupon booklet 5 H Hard disk contents, restoring 28 Hard disk drive ...

  • Fujitsu CELSIUS W370 - page 67

    Index A26361-K1000-Z221-1-7619, edition 2 59 Note boards 31 safety 3 Notes important 3 Numeric keypad 17 O ON/OFF switch 17 Other manuals 29 Out of system resources 29 Overview, device 1 P Packaging 5 Parallel port 7, 10 connecting devices 10 settings 10 Port SCSI 7 Ports, external devices 7 Preparing for use 5 Printer 7 Processor 52 replacing 52 P ...

Manufacturer Fujitsu Category Desktop

Documents that we receive from a manufacturer of a Fujitsu CELSIUS W370 can be divided into several groups. They are, among others:
- Fujitsu technical drawings
- CELSIUS W370 manuals
- Fujitsu product data sheets
- information booklets
- or energy labels Fujitsu CELSIUS W370
All of them are important, but the most important information from the point of view of use of the device are in the user manual Fujitsu CELSIUS W370.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Fujitsu CELSIUS W370, service manual, brief instructions and user manuals Fujitsu CELSIUS W370. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Fujitsu CELSIUS W370.

Similar manuals

A complete manual for the device Fujitsu CELSIUS W370, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Fujitsu CELSIUS W370 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Fujitsu CELSIUS W370.

A complete Fujitsu manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Fujitsu CELSIUS W370 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Fujitsu CELSIUS W370, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Fujitsu CELSIUS W370, that we can find in the current document
3. Tips how to use the basic functions of the device Fujitsu CELSIUS W370 - which should help us in our first steps of using Fujitsu CELSIUS W370
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Fujitsu CELSIUS W370
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Fujitsu CELSIUS W370 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Fujitsu CELSIUS W370?

Use the form below

If you did not solve your problem by using a manual Fujitsu CELSIUS W370, ask a question using the form below. If a user had a similar problem with Fujitsu CELSIUS W370 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)