Manual Aastra Telecom ATP-CNX-040-01

190 pages 4.78 mb
Download

Go to site of 190

Summary
  • Aastra Telecom ATP-CNX-040-01 - page 1

    ATP-CNX-040-01 Document Revision 01.07 Aastra CNX Conference Network Switch Release 1.3 June 2006 Aastra CNX Conference Network Switch System Administrator Guide ...

  • Aastra Telecom ATP-CNX-040-01 - page 2

    *Aastra, Aastra T elecom, and the Aastra T elecom corporate logo are registered trademarks of Aastra T echnologies, Limited. Microsoft, Microsoft Windows, and In ternet Explorer are trademar ks of Microsoft Corporat ion. NFS, Sun, SunOS, Java, JavaHelp, Solaris, and Sun Microsystems are tradema r ks of Sun Microsystems, Inc. Ethernet is a registere ...

  • Aastra Telecom ATP-CNX-040-01 - page 3

    ATP-CNX-040-01 Rel. 1. 3, Doc. Rev. 01.07 iii Conten ts Contents Warranty, regulator y, safety, and copyright / licensing not ices Warranty - Aastra Telecom, In c. ................ ............. ............. ................ ............. ................ . ix Warranty Limitation ............... ................. ...... ............. ............. ...

  • Aastra Telecom ATP-CNX-040-01 - page 4

    iv ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 Contents Connect to the console ............. ............. ................ ............. ................ ................ ............ 1-5 . Console port parameters . ................ ................ ............. ................ ................ ............ 1-5 . Local connection ...... ........... ...

  • Aastra Telecom ATP-CNX-040-01 - page 5

    ATP-CNX-040-01 Rel. 1. 3, Doc. Rev. 01.07 v Conten ts Aastra CNX software ............. ............. ................ ................ ............. ................ ............. ..2-8 . Description ............ ............. ................ ............. ................ ............. ................ ............ 2-8 . Protocols and RFCs ..... ...

  • Aastra Telecom ATP-CNX-040-01 - page 6

    vi ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 Contents Chapter 5 Maint aining the Aastra CNX Overview ............. ............ ................. ............. ................ ............. ................ ............. ..... ...5-1 . Description ............ ............. ................ ............. ................ ............. ............. ...

  • Aastra Telecom ATP-CNX-040-01 - page 7

    ATP-CNX-040-01 Rel. 1. 3, Doc. Rev. 01.07 vii Conten ts Appendix A Conference key options Participant and Moderator key options .. ....... ...... ............. ............. ................ ............. .... A-1 . Description ............ ............. ............. ................ ............. ................ ............. .............. A-1 ...

  • Aastra Telecom ATP-CNX-040-01 - page 8

    ...

  • Aastra Telecom ATP-CNX-040-01 - page 9

    ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 ix W arranty , regulatory , safety , and copyright / licensing notices W arranty - Aastra T elecom, Inc. Aastra T elecom Inc. ("Aastra" ) warrants ("W arranty") to its customer that: (i) Aastra has good and ma rketable title to the Product at the time of delivery to its customer , free an ...

  • Aastra Telecom ATP-CNX-040-01 - page 10

    x ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide Regulatory information U.S.A. requirement s The AASTRA CNX has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the Federal Communications Commi ssion (FCC) rules. Th ese limits are designed to provide reasonable protection ...

  • Aastra Telecom ATP-CNX-040-01 - page 11

    ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 xi Aastra T elecom recommends that you in stall an AC surge protector in the AC outlet to which the equipment is connected. This helps to prevent damage to the equipment caused by local light ning strikes or other electrical sur ges. THE AASTRA CNX HAS NO U SER SER VICEBLE P ARTS. FCC and telephone company p ...

  • Aastra Telecom ATP-CNX-040-01 - page 12

    xii ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide CAUTION: Y ou should not attempt to make such connections. Y ou should c ontact the appropriate inspection authority or electrician. Canada CS-03 Règl es et règlement s « A VIS : Le présent matériel est conforme au x spécifications techniques d’Industrie Canada appl ...

  • Aastra Telecom ATP-CNX-040-01 - page 13

    ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 xiii European requirement s EMI/EN 55 022 statement This certifies that the Aastra CNX Asterisk Network Switch is shi elded against the gene ration of radio interference in accordance with the application of C ouncil Directive 89/336/EEC. Conformity is declared by the application of EN 55 022:1998 and EN 55 ...

  • Aastra Telecom ATP-CNX-040-01 - page 14

    xiv ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide Safety warnings General warnings The following safety warnings apply: • Mechanical hazards and electrical s hock hazards are possible if you remove on e or more of the modules. There are no operator-serviceable modul es. Only qualified personnel should service this equip ...

  • Aastra Telecom ATP-CNX-040-01 - page 15

    ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 xv Software licensing and copyright The Aastra CNX product consists of an Aastra designed hardware platform distributed with embedd ed Linux operatin g system and application software . This embedded software consists of multiple Aastra and third party programs; each individual program may be subject to one ...

  • Aastra Telecom ATP-CNX-040-01 - page 16

    ...

  • Aastra Telecom ATP-CNX-040-01 - page 17

    ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 xvii Introduction Congratulations!! Y ou have purchas ed a highly functional, cost-effective, easy-to-use Aastra CNX Conference Network Switch for use in your network. The Aastra CNX is easy to install a nd operate, and provides a comprehensive set of security features you would expect from a state-of-the-ar ...

  • Aastra Telecom ATP-CNX-040-01 - page 18

    xviii ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide For a list of additional parts that you need to install the Aastra CNX (which are not included in the shipping package), see Chapter 1, “Aastra CNX Installatio n and Setup Procedures.” . Aastra CNX unit Power cable CompactFlash card Rack mounting brackets with T ech n ...

  • Aastra Telecom ATP-CNX-040-01 - page 19

    ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 1-1 Chapter 1 Aastra CNX Installation and Setup Procedures Introduction This section provides quic k installation and setup procedures for installing and starting up the Aastra CNX Conference Network Switch. This section also provides a list of additional parts that you need to install the Aastra CNX. Refere ...

  • Aastra Telecom ATP-CNX-040-01 - page 20

    Prepare for hardwa re installation 1-2 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide Prep are for hardware inst allation What you need for a single inst allation • One Aastra CNX unit • One AC power cable • One CompactFlash memory card • One set of rack mounting bracket s with six (6) Phillips head screws • T rus ...

  • Aastra Telecom ATP-CNX-040-01 - page 21

    Prepare for hardwa re installati on ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 1-3 Aastra CNX Installation and Setup Procedures Check the shipping content s Upon opening the shipping p ackage, inventory the contents to be sure there are no missing or damaged parts, as described in the Introduction section of this guide. Determine location of Aast ra ...

  • Aastra Telecom ATP-CNX-040-01 - page 22

    Install the Aast ra CNX in a rack 1-4 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide Inst all the Aastra CNX in a rack Procedure T o install the Aastra CNX in a rack: Illustration W arning: Before you install the Aastra CNX unit in a rack, ensure that the rack is sturdy and well secured. Caution: The operating environment m ...

  • Aastra Telecom ATP-CNX-040-01 - page 23

    Connect to the console ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 1-5 Aastra CNX Installation and Setup Procedures Connect to the console Console port p arameters Y ou can access the Aastra CNX console loca lly or remotely . Ensure that you configure your terminal or PC (termina l emulator) console port parameters as provided in the following table. ...

  • Aastra Telecom ATP-CNX-040-01 - page 24

    Connect to the console 1-6 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide Remote connection Procedures T o connect a remote PC and an Aastra CNX to an Ethernet LAN: T o connect a mode m: Illustration Ste p Action a Attach one end of an Ethernet cab le to the Etherne t port on the PC, and the o ther end to a LAN port. b Atta ...

  • Aastra Telecom ATP-CNX-040-01 - page 25

    Connect th e network ca bles ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 1-7 Aastra CNX Installation and Setup Procedures Connect the network cables Procedure T o connect the network cables: Illustration Note: Make sure you have the appropri ate network cables that you need for your facility . Connect them to the applicable in terfaces on the rear of ...

  • Aastra Telecom ATP-CNX-040-01 - page 26

    Connect the p ower cable 1-8 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide Connect the power cable Ground the chassis T o ground the chassis: Illustration Ste p Action a Locate the 3-hole, female, power rece ptacle on the rear of the chassis. b Plug the male, 3-pro ng connector on the power cable into the power receptacle ...

  • Aastra Telecom ATP-CNX-040-01 - page 27

    Startup and check the Aastra CNX ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 1-9 Aastra CNX Installation and Setup Procedures S t artup and check the Aastra CNX Apply power to the Aastra CNX T o start up the Aastra CNX, insert the CompactFlash card into slot 1 of the unit and apply power from the power source. Powering up a new Aastra CNX: • Starts ...

  • Aastra Telecom ATP-CNX-040-01 - page 28

    Startup and check th e Aastra CNX 1-10 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide Illustration Alarm Indicators T o check alarm indicators on the Aastra CNX: Ste p Action a Check that the St atus LED is not ON Red. If the S tatus LED is ON Red, an alarm condition exists in the unit. Contact your System Administrator . N ...

  • Aastra Telecom ATP-CNX-040-01 - page 29

    Configure the net work settings ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 1-11 Aastra CNX Installation and Setup Procedures Configure the network settings Requirement s The following is requi red be fore you configure the Aastra CNX for the first time: • The Aastra CNX must physically be connected to your console using an RS-232/DB-9 cable. • Th ...

  • Aastra Telecom ATP-CNX-040-01 - page 30

    Configure the network settings 1-12 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide Run network and time configuration Use the following procedure to initially configure the network settings on the Aastra CNX hardware. Ste p Action 1 After first-time power up of the CNX, the foll owing displays in a termin al window: Welcome ...

  • Aastra Telecom ATP-CNX-040-01 - page 31

    Configure the net work settings ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 1-13 Aastra CNX Installation and Setup Procedures 6 Enter “ y ” if the network information is co rrect, and press <Enter>. Enter “ n ” if the network information is incorrect, and press <Enter>. Note: If you en tered “ n ” at the verification prompt, re ...

  • Aastra Telecom ATP-CNX-040-01 - page 32

    Configure the network settings 1-14 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide 9 Enter the domain name for the Aastra CNX and press <Enter>. For example: Domain Name: aastra.com ↵ The following prompts display: Nameserver #1: Nameserver #2: 10 Enter the IP address of th e DNS servers for the Aastra CNX and press ...

  • Aastra Telecom ATP-CNX-040-01 - page 33

    Configure the net work settings ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 1-15 Aastra CNX Installation and Setup Procedures 11 E n t e r “ y ” if the DNS information is correct, and press <Enter>. Enter “ n ” if the DNS informatio n is incorrect, and press <Enter>. Note: If you en tered “ n ” at the verification prompt, repea ...

  • Aastra Telecom ATP-CNX-040-01 - page 34

    Configure the network settings 1-16 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide 13 Enter “ y ” if the timezone is corre ct, and press <Enter>. Enter “ n ” if the timezone is incorrect, and press <Enter>. Note: If you en tered “ n ” at the verification prompt, repeat step 12 to correct the ti mezon ...

  • Aastra Telecom ATP-CNX-040-01 - page 35

    Configure the net work settings ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 1-17 Aastra CNX Installation and Setup Procedures 15 Enter “ y ” if the date and time are co rrect, and press <Enter>. Enter “ n ” if the da te and ti me are incorrect, and press <Enter>. Note: If you en tered “ n ” at the verification prompt, repeat st ...

  • Aastra Telecom ATP-CNX-040-01 - page 36

    Configure the network settings 1-18 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide 17 Enter up to four NTP servers in your network, and press <Enter>. For example: NTP Server #1: [pool.ntp.org]: 192.1 67.2.11 ↵ NTP Server #2: [pool.ntp.org]: 192.1 67.2.12 ↵ NTP Server #3: [pool.ntp.org]: 0.0.0 .0 ↵ NTP Server #4 ...

  • Aastra Telecom ATP-CNX-040-01 - page 37

    Using the Aastra CNX GUI via the Web ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 1-19 Aastra CNX Installation and Setup Procedures Using the Aastra CNX GUI via the W eb Requirement Important: The JRE allows you to use the Aa stra CNX graphical user interface (GUI) to configure, manage, and maintain the Aastra CNX. Y ou must have JRE installed in order ...

  • Aastra Telecom ATP-CNX-040-01 - page 38

    Using the Aastra CNX GUI via the Web 1-20 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide Configuration det ails ( System Administrator s only ) For configuration information on the Aastra CNX, see Chapter 3, “Configuring the Aastra CNX.” The CDROM included in the Aastra CNX package provides the Aastra CNX technical docu ...

  • Aastra Telecom ATP-CNX-040-01 - page 39

    Overview ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 2-1 About the Aastra CNX Chapter 2 About the Aastra CNX Overview The Aastra Conference Network Switch (C NX) is a hi gh-quality , state-of-the-art, voice-conferencing switch for small an d medium enterprise co nferencing. It mixes traditional circuit-switched te lephone calls (TDM) and packet V oice ...

  • Aastra Telecom ATP-CNX-040-01 - page 40

    Overview 2-2 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide The Aastra CNX is easy to install and configure for the network administrator . Managing and maintaining the Aastra CNX can be accomplished using a web browser . Diagnostic features include repo rting facilities, such as booking records and activity records, to aid ...

  • Aastra Telecom ATP-CNX-040-01 - page 41

    Overview ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 2-3 About the Aastra CNX • Cost-effective conferencing for small to medium-size enterprises — T ime and travel cost savings — Faster product development — A vailability of decision makers — Global presence with low cost — Critical information exchange V oice processing features The Aastr ...

  • Aastra Telecom ATP-CNX-040-01 - page 42

    Aastra CNX hardware 2-4 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide Aastra CNX hardware Description This section provides inform ation about the Aastra CNX chassis, the components shipped with the product, and descriptions of the front a nd rear panels on the unit. Chassis The Aastra CNX chassis has a width of 12 in. (30 ...

  • Aastra Telecom ATP-CNX-040-01 - page 43

    Aastra CNX hardware ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 2-5 About the Aastra CNX Front p anel The Aastra CNX front panel consists of t he following: • Stat us/Power LEDs • T wo (2) Ethernet LEDs • Four (4) pairs T1/E1 LEDs • T wo (2) CompactFlash memory card slots (slot 1 and slot 2) The following illustration shows the Aastra CNX fron ...

  • Aastra Telecom ATP-CNX-040-01 - page 44

    Aastra CNX hardware 2-6 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide The following table describes each of th e components on the Aastra CNX front panel. Front Panel Component Stat e Meaning Power LED OFF ON ( green ) Power off Power on Stat us L ED OFF ON ( green ) ON ( red ) ON ( red ) for 1 second Power off Ready to ta ...

  • Aastra Telecom ATP-CNX-040-01 - page 45

    Aastra CNX hardware ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 2-7 About the Aastra CNX Rear p anel The Aastra CNX rear panel consists of the following: • AC power cord receptacle • Four RJ-48C T1/E1 ports • One 9-pin female DB-9 serial console port (for RS-232 cable) • T wo RJ-45, 10/100BaseT Ethernet ports The following illustration shows t ...

  • Aastra Telecom ATP-CNX-040-01 - page 46

    Aastra CNX software 2-8 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide Aastra CNX software Description This section provides the following software features for the Aastra CNX: • Protocols and RFCs • Conference capabilities • Users and user privileges • Reporting capabilities • Aastra CNX upgrades • Protocols an ...

  • Aastra Telecom ATP-CNX-040-01 - page 47

    Aastra CNX softwar e ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 2-9 About the Aastra CNX • Network Information Service (NIS) fo r integration with Unix and Linux servers • Simple Mail Transfer Protocol (SMTP) for integration with email systems When using H.323, the Aastra CNX functio ns as a terminal appearing as a peer to H.323-based IP phones . ...

  • Aastra Telecom ATP-CNX-040-01 - page 48

    Aastra CNX software 2-10 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide Conference cap abilities Each Aastra CNX supports 30 conference participants with up to 15 active conferences (60-port unit supports 60 participants with up to 30 active conferences; 120-port unit supports 12 0 participants with up to 60 active conferen ...

  • Aastra Telecom ATP-CNX-040-01 - page 49

    Aastra CNX softwar e ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 2-11 About the Aastra CNX Port resource management Y ou can configure Aastra CNX switc hes with a number of ports to be held in reserve for specific conferences. If all no n-reserved ports on the Aastra CNX are in use, any attempt to join a conference on that Aastra CNX results in a busy ...

  • Aastra Telecom ATP-CNX-040-01 - page 50

    Aastra CNX software 2-12 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide Registered User The following table provid es a list of available Aastra CNX functions that a registered user can perform. Manage • Add and delete users and system admin istrators • Modify passwords • Create, modify , and delete permanent conferen ...

  • Aastra Telecom ATP-CNX-040-01 - page 51

    Aastra CNX softwar e ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 2-13 About the Aastra CNX Conference p articip ant Conference participants have access to a conference via du al-tone multifreq uency (DTMF) using a passcode. One or more conference participants can be a moderator which provides additional control over the conference. The following table ...

  • Aastra Telecom ATP-CNX-040-01 - page 52

    Aastra CNX software 2-14 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide Reporting cap abilities The reporting feature on the Aas t ra CNX provides the following: • Assists a system administrator in ga uging port usage (and abuses), with a view to resource planning . • T racks potential security breaches by unauthorized ...

  • Aastra Telecom ATP-CNX-040-01 - page 53

    Aastra CNX softwar e ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 2-15 About the Aastra CNX Aastra CNX upgrades The Aastra CNX is field upgradable from a 30-p ort unit to a 60- or 120-port unit. The following table shows the potentia l number of active participants and conferences for each type of unit. Aastra CNX Number of active participant s Number ...

  • Aastra Telecom ATP-CNX-040-01 - page 54

    Software requirements The following table provides the minimum software you need to config ure and manage conferences on the Aastra CNX. Software Minimum requirements Web browser Any Web browser running Java 2 Platform V1.5.0 S tandard Edition or later Java Runtime Environment (JRE) Note: The JRE allows you to use the Aastra CNX graphica l user int ...

  • Aastra Telecom ATP-CNX-040-01 - page 55

    ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 3-1 Chapter 3 Configuring the Aastra CNX Overview Description Y ou perform an initial configuration of the Aastra CNX from the console port. Initial configuration includes setting specific essential parameters, including the unit’ s network settings. Successful initial configuration allows you to complete ...

  • Aastra Telecom ATP-CNX-040-01 - page 56

    Overview 3-2 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide Modifying the initial configuration After initially configuring the Aastra C NX using the setup script, you can modify the settings using additional opti ons that the script provides. The following procedures provide additio nal options you can perform using the se ...

  • Aastra Telecom ATP-CNX-040-01 - page 57

    Overview ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 3-3 Configuring the Aastra CNX Ste p Action 1 At the Aastra CNX Mai n Menu, select option 2 , and press <Ent er>. Welcome to the Aastra CNX Conference Network Switch Main Menu 1. Run network and time configuration 2. Change Telnet access 3. Set date and time 4. Configure Network Time Protocol ...

  • Aastra Telecom ATP-CNX-040-01 - page 58

    Overview 3-4 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide (3) Set date and time This option allows you to modify the da te and time that you set during the “Run network and time configuration” proced ure. Use the following procedure to modify the date and time on the Aastra CNX. Note: If at any time during the initial ...

  • Aastra Telecom ATP-CNX-040-01 - page 59

    Overview ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 3-5 Configuring the Aastra CNX 2 Enter your local timezone and press <Enter>. For example: Enter a choice, "back" to go up one level, or "cancel" to cancel: EST ↵ The following message and prompt displ ays: Timezone: EST Are you sure? (y/n) 3 Enter “ y ” if the timezo ...

  • Aastra Telecom ATP-CNX-040-01 - page 60

    Overview 3-6 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide 5 Enter “ y ” if the date and time are co rrect, and press <Enter> . Enter “ n ” if the da te and ti me are incorrect, and press <Enter>. Note: If you en tered “ n ” at the verification prompt, repeat step 4 to correct the date and time, and ...

  • Aastra Telecom ATP-CNX-040-01 - page 61

    Overview ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 3-7 Configuring the Aastra CNX (4) Configure Network T ime Protocol (NTP) This option allows you to modify the Ne twork T ime Protocol (NTP) that you set during the “Run network and time configuratio n” procedure. Use the following procedure to modify th e NTP on the Aastra CNX. Note: If at any ...

  • Aastra Telecom ATP-CNX-040-01 - page 62

    Overview 3-8 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide 3 Enter up to four NTP servers in your network, and press <Enter>. F or example: NTP Server #1: [pool.ntp.org]: 192.1 67.2.11 ↵ NTP Server #2: [pool.ntp.org]: 192.1 67.2.12 ↵ NTP Server #3: [pool.ntp.org]: 0.0.0 .0 ↵ NTP Server #4: [pool.ntp.org]: 0.0.0 ...

  • Aastra Telecom ATP-CNX-040-01 - page 63

    Overview ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 3-9 Configuring the Aastra CNX (5) Force reboot This option allows you to manually force a rebo ot of the Aastra CNX. W arning: Use caution when using the reb oot option. If the Aastra CNX is in use and you perform a reboot, all active conferences are aborted. Note: If at any time during the initial ...

  • Aastra Telecom ATP-CNX-040-01 - page 64

    Logging in to the Aastra CNX 3-10 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide Logging in to the Aastra CNX Description After initial setup of the A astra CNX network information via the console port, the Aastra CNX bec omes active and ready fo r you to continue config uration of the software to manage users, conferences, ...

  • Aastra Telecom ATP-CNX-040-01 - page 65

    Logging in to t he Aastra CNX ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 3-11 Configuring the Aastra CNX Procedure Use the following procedure to log into the Aastra CNX. Ste p Action 1 Open your Web browser . Enter the URL or IP address of the Aastra CNX and press <Return>. For example : http://CNX.aastra.com or http://192.168.2.6 Result: A di ...

  • Aastra Telecom ATP-CNX-040-01 - page 66

    Logging in to the Aastra CNX 3-12 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide 2 Click to accept the certificate. Note: Clicking YES accepts the certificate for the current session only . If you log out and log back into the Aastra CNX GUI, this certificate displays again. or Click to always accept the cert ificate from t ...

  • Aastra Telecom ATP-CNX-040-01 - page 67

    Logging in to t he Aastra CNX ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 3-13 Configuring the Aastra CNX 4 Enter your Aastra CNX user name and password, and then click . For a procedure to change your password, see “Configuring the Aastra CNX” on page 3-1 4 . T o change your user ID, see Chapter 4, “Mana ging the Aastra CNX.” Result: The Aast ...

  • Aastra Telecom ATP-CNX-040-01 - page 68

    Configuring the Aastra CNX 3-14 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide Configuring the Aastra CNX Description Y ou configure the Aastra CNX using the GUI provided by the downloaded applet running in a W eb browser . At the Aastra CNX main window , the Configur e CNX tab displays the configurable objects. Clicking on ...

  • Aastra Telecom ATP-CNX-040-01 - page 69

    Configuring the Aastra CNX ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 3-15 Configuring the Aastra CNX The following parameters may be configured: Parameter What you confi gure Global • Languages for voice prompts • Secondary Language for voice promp ts • Conference pho ne number • Number of ports to reserve for permanent (reservationless) con ...

  • Aastra Telecom ATP-CNX-040-01 - page 70

    Procedures 3-16 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide Procedures General configuration Use the following procedure to co nfigure the Aastra CNX to communicate in your network. Ste p Action 1 Open your Web browser and enter the URL fo r your Aastra CNX. Log in with a valid user ID and password. 2 Click the Configure ...

  • Aastra Telecom ATP-CNX-040-01 - page 71

    Procedures ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 3-17 Configuring the Aastra CNX Global Config uration 3 Under the CNX Configuration object, click “ Global ”. Result: The Aastra CNX global attrib ute fields display . 4 Config ure the attributes as required. Ste p Action Attribute Default V al id V alues/Descriptio n Primary Language English ...

  • Aastra Telecom ATP-CNX-040-01 - page 72

    Procedures 3-18 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide 4 (cont’d) Global configuratio n attributes continue d 5 Click to save the configuration to the Aas tra CNX and to the CompactFlash card. Ste p Action Attribute Default V al id V alues/Descriptio n Permanent Ports Note: This attribute must be set to an appropr ...

  • Aastra Telecom ATP-CNX-040-01 - page 73

    Procedures ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 3-19 Configuring the Aastra CNX Network Config uration 6 Under the CNX Configuration object, click “ Network ”. Result: The Aastra CNX network at tribute fields disp lay . Ste p Action ...

  • Aastra Telecom ATP-CNX-040-01 - page 74

    Procedures 3-20 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide 7 Config ure the attributes as required. Ste p Action Attribute Default V al id V alues/Descriptio n IP Address 1 <Current IP address of the Aastra CNX> Description : IP address for Ethernet 1, as initially configured from the console. Netmask 1 <Curren ...

  • Aastra Telecom ATP-CNX-040-01 - page 75

    Procedures ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 3-21 Configuring the Aastra CNX 7 (cont’d) Network configuration attributes continued Note: Y ou ca n enter up to four NTP servers in your network, an d press <Enter>. For example: NTP Server #1: [pool.ntp.org]: 192.1 67.2.11 ↵ NTP Server #2: [pool.ntp.org]: 192.1 67.2.12 ↵ NTP Server ...

  • Aastra Telecom ATP-CNX-040-01 - page 76

    Procedures 3-22 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide T1/E1 Configuration 9 Under the CNX Configuration object, click “ T1/E1 ”. Result: The Aastra CNX T1/E1 attribute fields display . Ste p Action ...

  • Aastra Telecom ATP-CNX-040-01 - page 77

    Procedures ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 3-23 Configuring the Aastra CNX 10 Configure the attributes as required . Ste p Action Attribute Default V al id V alues/Descriptio n Framing T ype T1 FRAMING T1 FRAMING E1 FRAMING Clocking PORT 1 CLOCK INTERNAL CLOCK PORT 1 CLOCK PORT 2 CLOCK PORT 3CLOCK PORT 4CLOCK INTERNAL CLOCK - Uses the inte ...

  • Aastra Telecom ATP-CNX-040-01 - page 78

    Procedures 3-24 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide 10 (cont’d) T1/E1 attributes continued . Ste p Action Attribute Default V al id V alues/Descriptio n Switch T y pe ( continued ) For T1 Framing: DMS 100 For E1 Framing: ETSI Descriptions of T1 Switch T ypes ( continued ): The following optio ns are methods tha ...

  • Aastra Telecom ATP-CNX-040-01 - page 79

    Procedures ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 3-25 Configuring the Aastra CNX 10 (cont’d) T1/E1 attributes continued . 1 1 Click to save the configuration to the Aastra CNX and to the Comp actFlash card. Ste p Action Attribute Default V al id V alues/Descriptio n Line Buildout For T1 Framing: 0 to 1 10 ft.(DSX-1) For E1 Framing: 120 Ohms Fo ...

  • Aastra Telecom ATP-CNX-040-01 - page 80

    Procedures 3-26 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide User Authentication Con figuration 12 Under th e CNX Configuration object, click “ User Authentication ”. Result: The Aastra CNX User Authentication attribute field s display . Note: Users may be authenticated against a secure lo cal database stored on the A ...

  • Aastra Telecom ATP-CNX-040-01 - page 81

    Procedures ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 3-27 Configuring the Aastra CNX 13 Configure the attributes as required . Ste p Action Attribute Default V al id V alues/Descriptio n Windows Authentication DISABLE ENABLE DISABLE Description : Specifies whether or not to authenticate a user against a Windows server . Domain Username None Descript ...

  • Aastra Telecom ATP-CNX-040-01 - page 82

    Procedures 3-28 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide 13 (cont’d) User Authentication at tributes conti nued . 14 Click to save the configuration to the Aastra CNX and to the CompactFlash card. Ste p Action Attribute Default V al id V alues/Descriptio n NIS Authentication DISABLE DISABLE SERVER BROADCAST Descript ...

  • Aastra Telecom ATP-CNX-040-01 - page 83

    Procedures ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 3-29 Configuring the Aastra CNX Conference configuration Use the following procedure to configure the conference specifications for your Aastra CNX. Ste p Action 1 While logged into the Aastra CNX, click the Configure CNX ta b. 2 Dou ble-click the Conferenc e object to expand the confer ence folde ...

  • Aastra Telecom ATP-CNX-040-01 - page 84

    Procedures 3-30 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide 5 Click to save the configuration to the Aas tra CNX and to the CompactFlash card. Conferen ce/V oice 6 Under the Conference object, click “ Vo i c e ”. Result: The voice conference attri butes display . Note: The conference voice settings are for advanced u ...

  • Aastra Telecom ATP-CNX-040-01 - page 85

    Procedures ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 3-31 Configuring the Aastra CNX 7 Config ure the attributes as required. 8 Click to save the configuration to the Aas tra CNX and to the CompactFlash card. Ste p Action Attribute Default V al id V alues/Descriptio n Electrical Echo Cancellation 32 Range : 0 (disabled), 32 to 128 in increments of 4 ...

  • Aastra Telecom ATP-CNX-040-01 - page 86

    Procedures 3-32 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide V oice over IP configuration Use the following procedure to configure the voice over IP spe cifications for your Aastra CNX. Ste p Action 1 While logged into the Aastra CNX, click the Configure CNX ta b. V oice over IP/SIP 2 Under the V oice over IP object , cli ...

  • Aastra Telecom ATP-CNX-040-01 - page 87

    Procedures ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 3-33 Configuring the Aastra CNX 3 Config ure the attributes as required. 4 Click to save the configuration to the Aas tra CNX and to the CompactFlash card. Ste p Action Attribute Default V al id V alues/Descriptio n SIP service ENABLE ENABLE DISABLE Registration DISABLE ENABLE DISABLE Register Not ...

  • Aastra Telecom ATP-CNX-040-01 - page 88

    Procedures 3-34 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide V oice over IP/H.323 5 Under the V oice over IP object, click “ H.323 ”. Result: The H.323 attributes display . Ste p Action ...

  • Aastra Telecom ATP-CNX-040-01 - page 89

    Procedures ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 3-35 Configuring the Aastra CNX 6 Config ure the attributes as required. Ste p Action Attribute Default V al id V alues/Descriptio n H.323 service DISABLE ENABLE DISABLE Description : Enables or disables the H.323 protocol on the Aastra CNX. H.323 is an international standard protocol for multimed ...

  • Aastra Telecom ATP-CNX-040-01 - page 90

    Procedures 3-36 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide 6 (cont’d) H.323 attributes continued . 7 Click to save the configuration to the Aas tra CNX and to the CompactFlash card. Ste p Action Attribute Default V al id V alues/Descriptio n Gatekeepe r Address Note : Enabled only if Gatekeepe r Registration is set to ...

  • Aastra Telecom ATP-CNX-040-01 - page 91

    Procedures ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 3-37 Configuring the Aastra CNX V oice over IP/RTP 8 Under the V oice over IP object, click “ RTP ”. Result: The RTP attribut es display . 9 Config ure the attributes as required. 10 Click to save the configuration to the Aastra CNX and to the CompactFlash card. Ste p Action Attribute Default ...

  • Aastra Telecom ATP-CNX-040-01 - page 92

    ...

  • Aastra Telecom ATP-CNX-040-01 - page 93

    ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 4-1 Chapter 4 Managing the Aastra CNX Managing users on the Aastra CNX Description A system administrator manages registered users and other system administrators on the Aastra CNX by accessing the Manage Users tab on the GUI main page . The following illustration shows the Aastra CNX Manage Users tab in the ...

  • Aastra Telecom ATP-CNX-040-01 - page 94

    Managing user s on the Aastra CNX 4-2 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide Procedures This section provides procedures for crea ting, modifying, and deleting Aastra CNX registered users and system administrators. Creating a registered user/system administrator Use the following procedure to create a registered use ...

  • Aastra Telecom ATP-CNX-040-01 - page 95

    Managing users o n the Aastra CNX ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 4-3 Managing the Aastra CNX Ste p Action 3 Click . Result: The user setting s window displa ys. 4 Set the attributes as required. 5 Click to save the settings to the Aastra CNX secure database. Attribute Default V al id V alues/Descriptio n User T ype Regular Regular System ...

  • Aastra Telecom ATP-CNX-040-01 - page 96

    Managing user s on the Aastra CNX 4-4 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide Modifying a registered user/system administrator Use the following procedure to modify an existing regist ered user and/or system administrator on the Aastra CNX. Ste p Action 1 While log ged into the Aastra CNX, cli ck the Manage U sers ta ...

  • Aastra Telecom ATP-CNX-040-01 - page 97

    Managing users o n the Aastra CNX ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 4-5 Managing the Aastra CNX Ste p Action 4 Modify the attribut es as required. Note: Y ou ca n modify the password and confirm password fields only . Usernames cannot be modified. 5 Click to save the settings to the Aastra CNX secure database. ...

  • Aastra Telecom ATP-CNX-040-01 - page 98

    Managing user s on the Aastra CNX 4-6 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide Deleting a user/system adminis trator Use the following procedure to delete an ex isting user and/or system administrator on the Aastra CNX. Ste p Action 1 While logged into the Aastra CNX, click the Man age Users tab. Result: The follo win ...

  • Aastra Telecom ATP-CNX-040-01 - page 99

    Managing conferen ces on the Aas tra CNX ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 4-7 Managing the Aastra CNX Managing conferences on the Aastra CNX Description A system administrator manages conference s on the Aastra CNX by accessing the Permanent Conferences tab and/or the Scheduled Confer ences tab on the GUI main page. The following illustrati ...

  • Aastra Telecom ATP-CNX-040-01 - page 100

    Managing confere nces on the Aastra CNX 4-8 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide Permanent Conference List A Permanent Conference List displays for system administrator use only . These conferences are permanently available, an d are also known as “ reservationless” or “ad-hoc” conferences. Y ou create per ...

  • Aastra Telecom ATP-CNX-040-01 - page 101

    Managing conferen ces on the Aas tra CNX ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 4-9 Managing the Aastra CNX Booking a new permanent conference Use the following procedure to schedul e a new permanen t conference on the Aastra CNX. Note: Dial-in services must be config ured and enabled to create permanent conferences. Before creatin g a conference ...

  • Aastra Telecom ATP-CNX-040-01 - page 102

    Managing confere nces on the Aastra CNX 4-10 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide Ste p Action 4 Enter the i nformation as required. Attribute Default V alid V alues/Description Conference Name None Up to 256 alph anumeric characte rs Guaranteed Number of Ports 0 For 30-port Aastra CNX: 2 to 30 For 60-port Aastra ...

  • Aastra Telecom ATP-CNX-040-01 - page 103

    Managing conferen ces on the Aas tra CNX ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 4-11 Managing the Aastra CNX Ste p Action 4 (cont’d) Schedule new permanent conference window continu ed Attribute Default V alid V alues/Description Moderated Not checked (disabled) Not checked (disabl ed) Checked (enabled) Description : Specifies whether or not th ...

  • Aastra Telecom ATP-CNX-040-01 - page 104

    Managing confere nces on the Aastra CNX 4-12 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide Ste p Action 4 (cont’d) Schedule new permanent conference window continu ed Attribute Default V alid V alues/Description PIN Participant (Applicable only when modifying an existing permanent conference.) <participant passcode> ...

  • Aastra Telecom ATP-CNX-040-01 - page 105

    Managing conferen ces on the Aas tra CNX ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 4-13 Managing the Aastra CNX Ste p Action 5 Click . Result: If a Moderato r was not selected for the conference, a message similar to the following displays: If a moderator was selected (enabled), a message similar to the following displ ays: 6 Click OK to save the co ...

  • Aastra Telecom ATP-CNX-040-01 - page 106

    Managing confere nces on the Aastra CNX 4-14 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide Modifying a permanent conference Use the following procedure to modify an existing pe rmanent confer ence on the Aastra CNX. Ste p Action 1 While logged into the Aastra CNX, click the Permanent Confer ences tab. Result: The follo win ...

  • Aastra Telecom ATP-CNX-040-01 - page 107

    Managing conferen ces on the Aas tra CNX ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 4-15 Managing the Aastra CNX Deleting a permanent conference Use the following procedure to delete an existing permanent conference on the Aastra CNX. 4 Modify the conference as required and click . Result: The Modify Complete windo w displays. Click OK . The conferen ...

  • Aastra Telecom ATP-CNX-040-01 - page 108

    Managing confere nces on the Aastra CNX 4-16 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide Scheduled Conference List A Scheduled Conference List consists of temporary conferences that occur for a scheduled period with a start time and end time. Once the conference is complete, the scheduled conference no longer displays in ...

  • Aastra Telecom ATP-CNX-040-01 - page 109

    Managing conferen ces on the Aas tra CNX ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 4-17 Managing the Aastra CNX 3 In the Sche duled Confere nce List , click . Result: The Create New Schedul ed Conference window displays. Ste p Action ...

  • Aastra Telecom ATP-CNX-040-01 - page 110

    Managing confere nces on the Aastra CNX 4-18 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide Conferen ce t ab 4 Click on the Conference tab and enter the information as required; then click on the Recurrence tab to set the recurrence pattern. Ste p Action Attribute Default V alid V alues/Description Conference Name None U p ...

  • Aastra Telecom ATP-CNX-040-01 - page 111

    Managing conferen ces on the Aas tra CNX ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 4-19 Managing the Aastra CNX 4 (cont’d) Schedule New Conference window continued . Ste p Action Attribute Default V alid V alues/Description Moderated Not checked (disabled) Not checked (disabl ed) Checked (enabled) Description : Specifie s whether or not the confer ...

  • Aastra Telecom ATP-CNX-040-01 - page 112

    Managing confere nces on the Aastra CNX 4-20 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide 4 (cont’d) Schedule New Conference window continued . Ste p Action Attribute Default V alid V alues/Description S tart <Current PC Date and Ti m e > Date: Specifies the month, da y , and ye ar that the scheduled conference i ...

  • Aastra Telecom ATP-CNX-040-01 - page 113

    Managing conferen ces on the Aas tra CNX ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 4-21 Managing the Aastra CNX 4 (cont’d) Schedule New Conference window continued . Recurre nce t ab 5 Schedule New Conference window conti nued . Ste p Action Attribute Default V alid V alues/Description Moderator (Applicable only when modifying an existing schedule ...

  • Aastra Telecom ATP-CNX-040-01 - page 114

    Managing confere nces on the Aastra CNX 4-22 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide 5 (cont’d) Schedule New Conference window continued . 6 Click . Result: A verification window displays asking you to confirm that the in formation you entere d for the scheduled conference is co rrect. The follow ing is an example ...

  • Aastra Telecom ATP-CNX-040-01 - page 115

    Managing conferen ces on the Aas tra CNX ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 4-23 Managing the Aastra CNX 7 Click YES if the information you entered is correct. or Click NO to close the verificatio n window and ree nter correct information in the “Schedule New Conferen ce” window . Result: If you click YES , a confirmation window d isplays ...

  • Aastra Telecom ATP-CNX-040-01 - page 116

    Modifying a scheduled conference Use the following procedure to modify an existing scheduled conference on the Aastra CNX. Ste p Action 1 While logged into the Aastra CNX, click the Scheduled Conferences tab. The following window di splays. Existing conferenc es disp lay in the Scheduled Conference List. 2 Click on a scheduled conference in the Sch ...

  • Aastra Telecom ATP-CNX-040-01 - page 117

    Managing conferen ces on the Aas tra CNX ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 4-25 Managing the Aastra CNX 3 Click . Result: The Modify Conference wind ow displays with the information about the confere nce you selected. Ste p Action ...

  • Aastra Telecom ATP-CNX-040-01 - page 118

    4 Modify the conference and recurrence as required and click . Note: The Modify Conference window also allows yo u to change the Partic ipant PIN, Moderator PIN and/or Owner of the conference if required. See th e table on page 4-18 for a description of each field in the Modify Conference window . Result: A verification window displays asking you t ...

  • Aastra Telecom ATP-CNX-040-01 - page 119

    Managing conferen ces on the Aas tra CNX ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 4-27 Managing the Aastra CNX Deleting a scheduled conference Use the following procedure to delete an existing scheduled conference on the Aastra CNX. Ste p Action 1 While logged into the Aastra CNX, click the Scheduled Conferences tab. Result: The follo wing window d ...

  • Aastra Telecom ATP-CNX-040-01 - page 120

    ...

  • Aastra Telecom ATP-CNX-040-01 - page 121

    ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 5-1 Chapter 5 Maintaining the Aastra CNX Overview Description Y ou can maintain the Aastra CNX by accessing the Maintain CNX tab in the Graphical User Interface (GUI).Th e following illustration shows the Maintain CNX tab in the Aastra CNX GUI. Aastra CNX status License Key Info System/Log File T ools ...

  • Aastra Telecom ATP-CNX-040-01 - page 122

    Overview 5-2 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide The following informatio n can be found on the Maintain CNX tab: Maint ain CNX t ab Allows you to: Stat us s Display current software version, la nguage pack, number of active calls, number of active conferences, number of scheduled conferences - Update Aastra CNX ...

  • Aastra Telecom ATP-CNX-040-01 - page 123

    Overview ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 5-3 Maintaining the Aastra CNX Log Files Maintain log files, core files, and CompactFlash disk space, and perform troubleshooting fu nctions - Download Call Detail Records (CDRs) - Cleanup unwanted files on th e CompactFlash to maximize disk sp ace capacity Note: The Download Core Files and Debug CN ...

  • Aastra Telecom ATP-CNX-040-01 - page 124

    Update CNX software 5-4 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide Up date CNX software Description The Update CNX Softwar e tool in the Maintain CNX window allows y ou to install software updates to the Aastra CNX. The Aastra CNX software is pack aged in a single file called “ cnx.dra ”.Y ou can place the cnx.dra f ...

  • Aastra Telecom ATP-CNX-040-01 - page 125

    Update CNX soft ware ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 5-5 Maintaining the Aastra CNX Ste p Action 1 Open your Web browser and enter the URL for your Aastra CNX. Log in with a valid user ID and password. 2 Click the Mainta in CNX tab in the Aastra CNX main window . Result: The Maintain Aastra CNX window displays. 3 In the “ Manage System ? ...

  • Aastra Telecom ATP-CNX-040-01 - page 126

    Update CNX software 5-6 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide 5 Click . Result: The following prompt d isplays. 6 Enter the location of th e cnx.dra file in the text box. or Click . The Select Fil e window displ ays. Navigate to the location of the cnx.dra file and click OPEN to automatic ally pla ce it in the text ...

  • Aastra Telecom ATP-CNX-040-01 - page 127

    Update CNX soft ware ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 5-7 Maintaining the Aastra CNX 7 Click . Result: The cnx.dra file proceeds to download to your Aastra CNX onboard flash an d the CNX CompactFlash card). When the upgrade is complete, the Aa stra CNX r eboots, the unit is upgraded, and is ready for use. When the upgrade is complete, the f ...

  • Aastra Telecom ATP-CNX-040-01 - page 128

    Update CNX software 5-8 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide 10 Click and verify the followi ng: • There is sufficient disk space for the operation of the Aastra CNX. Note : The Aastra CNX requires app roximately 35 MB or more of free disk space to operate properly . • There are no PRI alarms. • The Aastra C ...

  • Aastra Telecom ATP-CNX-040-01 - page 129

    Announcement option s ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 5-9 Maintaining the Aastra CNX Announcement options Description The Announcement Options tool in the Maintain CNX window allows you to load or remove language packs and cust omized conference greetings to/from the Aastra CNX. Language pack files are identified as “ <language>.ta ...

  • Aastra Telecom ATP-CNX-040-01 - page 130

    Announcement options 5-10 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide Procedure for loading language p acks Use the following procedure to load language packs to the Aastra CNX. Ste p Action 1 Open your Web browser and enter the URL for your Aastra CNX. Log in with a valid user ID and password. 2 Click the Mainta in CNX ...

  • Aastra Telecom ATP-CNX-040-01 - page 131

    Announcement option s ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 5-11 Maintaining the Aastra CNX 3 Click . Result: The follo wing window di splays. 4 Select the “ Load L anguage Pack ” option and click OK. Result: The following prompt d isplays. Ste p Action ...

  • Aastra Telecom ATP-CNX-040-01 - page 132

    Announcement options 5-12 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide 5 Enter the location of th e <langua ge>.tar .gz file in the text box. or Click . The Select Fil e window displ ays. Navigate to the location of the <lan guage>.tar .gz file and click OPEN to au tomatically place i t in the text box of the ...

  • Aastra Telecom ATP-CNX-040-01 - page 133

    Announcement option s ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 5-13 Maintaining the Aastra CNX Procedure for removing language p acks Use the following procedure to remove language packs from the Aastra CNX. Ste p Action 1 Open your Web browser and enter the URL for your Aastra CNX. Log in with a valid user ID and password. 2 Click the Mainta in CN ...

  • Aastra Telecom ATP-CNX-040-01 - page 134

    Announcement options 5-14 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide 3 Click . Result: The follo wing window di splays. 4 Select the “ Remove La nguage Pack ” option and click OK. Result: The following prompt d isplays. Ste p Action ...

  • Aastra Telecom ATP-CNX-040-01 - page 135

    Announcement option s ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 5-15 Maintaining the Aastra CNX 5 Enter the location of th e <language> .tar .gz file in the text box. or Click . The Select Fil e window displ ays. Navigate to the location of the <lan guage>.tar .gz file and click OPEN to au tomatically place i t in the text box of the Bro ...

  • Aastra Telecom ATP-CNX-040-01 - page 136

    Announcement options 5-16 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide Loading/removing customized greetings Y ou can load or remove customized gr eeting files to/from the Aastra CNX to provide customized telephony access when joining conferences. Procedure for loading customized greetings Use the following procedure to l ...

  • Aastra Telecom ATP-CNX-040-01 - page 137

    Announcement option s ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 5-17 Maintaining the Aastra CNX 3 Click . Result: The follo wing window di splays. 4 Select the “ Load Customized G reeting ” option and click OK. Result: The follo wing window di splays. 5 Select the language of the customized greeti ng you want to load. Ste p Action ...

  • Aastra Telecom ATP-CNX-040-01 - page 138

    Announcement options 5-18 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide 6 Enter the location of th e <filename>.p cm file in the text box. or Click . The Select Fil e window displ ays. Navigate to the location of the <filena me>.pcm file and click OPEN to automatically place it in the text box of the Browse win ...

  • Aastra Telecom ATP-CNX-040-01 - page 139

    Announcement option s ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 5-19 Maintaining the Aastra CNX Procedure for removing customized greetings Use the following procedure to remove a customized greeting from the Aastra CNX.. Ste p Action 1 Open your Web browser and enter the URL for your Aastra CNX. Log in with a valid user ID and password. 2 Click the ...

  • Aastra Telecom ATP-CNX-040-01 - page 140

    Announcement options 5-20 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide 3 Click . Result: The follo wing window di splays. 4 Select the “ Remove Customized Greeting ” option and click OK. Result: The follo wing window di splays. Ste p Action ...

  • Aastra Telecom ATP-CNX-040-01 - page 141

    Announcement option s ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 5-21 Maintaining the Aastra CNX 5 Select the language of the customized greeti ng you want to remove and click . Result: The following prompt d isplays: 6 Click YES to remove the customized greeting. Result: The <fil ename>.pcm file proceeds to delete from your Aastra CNX CompactF ...

  • Aastra Telecom ATP-CNX-040-01 - page 142

    Operational status 5-22 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide Operational st atus Description The Operational S tatus tool in the Maintain CNX window allows you to disp lay operational information abou t the Aastra CNX, such as, the length of time the Aastra CNX has been up and run ning. This information can be u s ...

  • Aastra Telecom ATP-CNX-040-01 - page 143

    Operational status ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 5-23 Maintaining the Aastra CNX Displaying operational st atus Use the following procedure to display the current operational status of the Aastra CNX. Ste p Action 1 Open your Web browser and enter the URL for your Aastra CNX. Log in with a valid user ID and password. 2 Click the Mainta i ...

  • Aastra Telecom ATP-CNX-040-01 - page 144

    Operational status 5-24 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide 3 Click . Result: The CNX Operationa l S t atus window displays. 4 Click to close the CNX Operational S tatus window . Ste p Action ...

  • Aastra Telecom ATP-CNX-040-01 - page 145

    Entering/editing License Key ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 5-25 Maintaining the Aastra CNX Entering/editing License Key Description The Aastra CNX has a license key assigned that specifically identifies the unit. When a you perform an update or upgrade to the Aastra CNX, the upgrade script requires that you input this li cense key for v ...

  • Aastra Telecom ATP-CNX-040-01 - page 146

    Entering/editing License Key 5-26 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide Procedure Use the following procedure to edit licen se key informat ion on the Aastra CNX. Ste p Action 1 Open your Web browser and enter the URL for your Aastra CNX. Log in with a valid user ID and password. 2 Click the Mainta in CNX tab in th ...

  • Aastra Telecom ATP-CNX-040-01 - page 147

    Entering/editing License Key ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 5-27 Maintaining the Aastra CNX 3 Click . Result: The License Key window displa ys. Note: For port upgrades and major software releases, you must enter a new license key to activate the Aastra CNX software. 4 Enter the new license key you received with the port upg rade or major ...

  • Aastra Telecom ATP-CNX-040-01 - page 148

    Rebooting the Aastra CNX 5-28 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide Rebooting the Aastra CNX Description This section describes how you can reboot the Aastra CNX unit for maintenance purposes if required. Procedure Use the following procedure to reboot y our Aastra CNX unit. Caution: Rebooting the Aastra CNX causes ...

  • Aastra Telecom ATP-CNX-040-01 - page 149

    Rebooting the Aastra CNX ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 5-29 Maintaining the Aastra CNX 3 Click . Result: The following prompt d isplays. 4 Click YES to reboot the Aastra CNX. OR Click NO to cancel the reb oot operation. 5 Close your browser and wait a few minutes before restarting your browser to access the Aastra CNX GUI. Ste p Action ...

  • Aastra Telecom ATP-CNX-040-01 - page 150

    Saving/Restoring Config uration 5-30 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide Saving/Restoring Configuration Description The Aastra CNX GUI provides both a Save Configuration and Restor e Configuration tool. These tools save and/or restore: • Software configuration • User information • Permanent and schedule d c ...

  • Aastra Telecom ATP-CNX-040-01 - page 151

    Saving/Restoring Configu ration ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 5-31 Maintaining the Aastra CNX Procedure Saving a configuration Use the following procedure to save the Aastra CNX configuration, user , and conference information to a compressed file. Ste p Action 1 Open your Web browser and enter the URL for your Aastra CNX. Log in with a ...

  • Aastra Telecom ATP-CNX-040-01 - page 152

    Saving/Restoring Config uration 5-32 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide 3 Click . Result: The Save CNX Configuration windo w displays. Note: The default file name is cnx.conf . Y ou can rename this file if required. Ste p Action ...

  • Aastra Telecom ATP-CNX-040-01 - page 153

    Saving/Restoring Configu ration ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 5-33 Maintaining the Aastra CNX 4 Navigate to the location on you r local PC wher e you want to save th e CNX configuration and click SA VE . Result: The following info rmation window displays. When the down load is complete, the follo wing prompt displays. 5 Click . Ste p Act ...

  • Aastra Telecom ATP-CNX-040-01 - page 154

    Saving/Restoring Config uration 5-34 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide Restoring a configuration Use the following procedure to restore th e Aastra CNX configuration, user , and conference information. W arning: Restoring a previous Aastra CNX configuration file will overwrite your current configuration , user ...

  • Aastra Telecom ATP-CNX-040-01 - page 155

    Saving/Restoring Configu ration ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 5-35 Maintaining the Aastra CNX 3 Click . Result: The Restore CNX Configuration Data window displays. Ste p Action ...

  • Aastra Telecom ATP-CNX-040-01 - page 156

    Saving/Restoring Config uration 5-36 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide 4 Navigate to the location on you r local PC w here a previous ve rsion of the Aastra CNX configuration file is stored and click OPEN . Result: The following info rmation window displays. When the down load is complete, the follo wing prompt ...

  • Aastra Telecom ATP-CNX-040-01 - page 157

    Setting date and ti me ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 5-37 Maintaining the Aastra CNX Setting date and time Description During initial configuration of the Aastra CNX (see Chapter 3, “Configuri ng the Aastra CNX” ) the date and time is set in the setup script. Using the Set CNX Date and Time tool, this date and time co nfiguration dis ...

  • Aastra Telecom ATP-CNX-040-01 - page 158

    Setting date and time 5-38 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide 3 Click . Result: The follo wing window di splays. 4 Set the date by selecting the app ropriate mont h, day , and year from the lists in this window . 5 Set the time by selecting the appropriate timezo ne and clock time from the lists in this window . ...

  • Aastra Telecom ATP-CNX-040-01 - page 159

    Setting date and ti me ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 5-39 Maintaining the Aastra CNX 7 Click OK to accept the date and time changes. Result: The following message displays: 8 Click OK to return to the Maint ain CNX window . Ste p Action ...

  • Aastra Telecom ATP-CNX-040-01 - page 160

    Downloading logs 5-40 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide Downloading logs Description This section describes the call detail reco rd (CDR) logs generated by the Aastra CNX. It also provides a procedure for downloading CDR logs to your local PC. Note: The Download Logs window displays a “ Support Logs ” tab a ...

  • Aastra Telecom ATP-CNX-040-01 - page 161

    Downloading logs ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 5-41 Maintaining the Aastra CNX What are CDR logs? Call detail record (CDR) logs are file s that the Aastra CNX automatically generates during call activity (ISDN, H. 323, and SIP), and during conference activity of an active 24 hour period and when the Aastra CNX star ts up. The Aastra CNX ...

  • Aastra Telecom ATP-CNX-040-01 - page 162

    Downloading logs 5-42 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide Example 2 The following example indicates an activ e conference scheduling CDR log. The log was generated by the Aastra CNX on March 20, 2004 at 1:20 P .M. and 34 seconds. confcdrlog.2004-03-20.13.20.34.csv.g z Note: The “csv” appendix indicates a co m ...

  • Aastra Telecom ATP-CNX-040-01 - page 163

    Downloading logs ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 5-43 Maintaining the Aastra CNX Downloading/deleting CDR logs Y ou can download cdrlog and/or confcdrlog file(s) to your local PC for viewing using the Download CDR Logs tool on the Maintain CNX tab in the Aastra CNX GUI. Y o u can also delete the log files as required. The following procedu ...

  • Aastra Telecom ATP-CNX-040-01 - page 164

    Downloading logs 5-44 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide 3 Click . Result: The Downloa d Logs window displays. 4 Click the “ CDR Logs ” tab. 5 Select the “from” and “to” dates of the log(s) you want to download. 6 Select the log type you want to download and then click FIL TER . . Note: V alid log ty ...

  • Aastra Telecom ATP-CNX-040-01 - page 165

    Downloading logs ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 5-45 Maintaining the Aastra CNX 8 Click . Result: The Save As window displays. 9 Navigate to the location on you r local PC where you want to save the CDR log file (s) and click SA VE . Result: The CDR lo g file(s) save to your local PC in the specifi ed location. When the download is comple ...

  • Aastra Telecom ATP-CNX-040-01 - page 166

    Downloading logs 5-46 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide Delete CDR logs Use the following procedure to delete a CDR log file(s) from the Aastra CNX CompactFlash card. Ste p Action 1 Open your Web browser and enter the URL for your Aastra CNX. Log in with a valid user ID and password. 2 Click the Mainta in CNX t ...

  • Aastra Telecom ATP-CNX-040-01 - page 167

    Downloading logs ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 5-47 Maintaining the Aastra CNX 3 Click . Result: The Downloa d Logs window displays. 4 Click the “ CDR Logs ” tab. 5 Select the “from” and “to” dates of the log(s) you want to delete. 6 Select the log type you want to delete and then click FIL TER . . Note: V alid log types are ...

  • Aastra Telecom ATP-CNX-040-01 - page 168

    Downloading logs 5-48 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide 8 Click . Result: The following is an example of the message that displays. Note: If any of the logs you are trying to delete are in use by the Aastra CNX, the following message displays: “Files are currently in use and will not be deleted”. 9 Click YE ...

  • Aastra Telecom ATP-CNX-040-01 - page 169

    Cleaning up the Aastra C NX ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 5-49 Maintaining the Aastra CNX Cleaning up the Aastra CNX Description The Aastra CNX generates logs and events that are stored on the Compactflash. Significant amounts of extraneous files can fill up required space preventing any more files from being stored. A full Co mpactflash ...

  • Aastra Telecom ATP-CNX-040-01 - page 170

    Cleaning up the Aastra CNX 5-50 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide Procedure Use the following procedure to clea n up the files on the Aastra CNX. Ste p Action 1 Open your Web browser and enter the URL for your Aastra CNX. Log in with a valid user ID and password. 2 Click the Mainta in CNX tab in the Aastra CNX ...

  • Aastra Telecom ATP-CNX-040-01 - page 171

    Cleaning up the Aastra C NX ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 5-51 Maintaining the Aastra CNX 3 Click . Result: The follo wing window di splays. Note: The files in this window are automatically selected and can be safely removed without affecting the operational integrity of the Aastra CNX. If there are no unnecessary fi les to delete, a mes ...

  • Aastra Telecom ATP-CNX-040-01 - page 172

    ...

  • Aastra Telecom ATP-CNX-040-01 - page 173

    ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 A-1 Appendix A Conference key options Particip ant and Moderator key options Description This section provides a quick reference li st of the participant and moderator key options you can use after successfully jo ining a conference on the Aastra CNX. Particip ant key options The following table lists th e p ...

  • Aastra Telecom ATP-CNX-040-01 - page 174

    Participant and Moderat or key options A-2 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide *Roll Call List holds up to 10 names on ea ch page with each name assigned an ID number . Moderator key options The following table lists the moderator key options. Conference Extens ion Request (Participant is allowed this option only ...

  • Aastra Telecom ATP-CNX-040-01 - page 175

    Participant and Moderat or key options ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 A-3 Conference ke y options *Roll Call List holds up to 10 names on ea ch page with each name assigned an ID number . Exit list # Help (Repeats Roll Call options.) * Conference Extens ion Request (Participant is allowed this option only in unmoderated conferences.) *3 E ...

  • Aastra Telecom ATP-CNX-040-01 - page 176

    ...

  • Aastra Telecom ATP-CNX-040-01 - page 177

    ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 B-1 Appendix B Additional information about CDR logs Description This appendix describes the call detail reco rd (CDR) logs generated by the Aastra CNX. For a procedure on downloading CDR logs to yo ur local PC, see Chapter 5, “Maintaining the Aastra CNX.” What do the CDR logs cont ain? The cdrlog files ...

  • Aastra Telecom ATP-CNX-040-01 - page 178

    B-2 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide Example The following example illustrate s the contents of log file cdrlog.2000-04-03.00.39.35.csv . This cdrlog file has ended activity since it contains a footer . 954722375,HEADER,1,RESTART 954722375,SYS_RESTART 954722385,CONF_ACT,256 954726246,CONF_INACT,257,15912104 95 ...

  • Aastra Telecom ATP-CNX-040-01 - page 179

    ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 B-3 Additional i nformation abo ut CDR logs CONF_ACT (Conference Active Record) D - when a co nference instance is scheduled. A CONF_ACT record includes: • Conference ID (integer) For permanent conferences, this record is generated when the conferenc e is booked, since it becomes active immed iately . For ...

  • Aastra Telecom ATP-CNX-040-01 - page 180

    B-4 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide CALL_END (Call End Record ) D - when a user disconn ects a call or is disconnected from the Aastra CNX using call types of TDM, SIP , or H.323. A CALL_END record includes: • Caller ID (integer) • Conference ID (interger) • Call type (TDM/SIP/H323) • Caller (SIP/H323 ...

  • Aastra Telecom ATP-CNX-040-01 - page 181

    ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 B-5 Additional i nformation abo ut CDR logs CONF_ADD (Conference Added Record) - D when the user has added a conference to the Aastra CNX via the graphica l user interface (GUI). A CONF_ADD record includes: • Exit status* (OK, DA T A_INV ALID, NOT_ENOUGH_POR TS, PORTS_IN_USE) • Conference detail See list ...

  • Aastra Telecom ATP-CNX-040-01 - page 182

    B-6 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide CONF_MOD (Conference Modified Record) - D when the user has modified an existi ng conference on the Aastra CNX via the graphical user interface (GUI). A CONF_MOD record includes: • Exit status* (OK, DA T A_INV ALID, NOT_ENOUGH_POR TS, PORTS_IN_USE) • Old conference See ...

  • Aastra Telecom ATP-CNX-040-01 - page 183

    ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 B-7 Additional i nformation abo ut CDR logs The following are examples of the cdrlog and the confcdrlog files. Example 1 The following example illustrate s the contents of log file confcdrlog.2000- 04-03.00.39.35 .csv . This log file has ended activity indicated by the FOOTER entry at the end of the file. 95 ...

  • Aastra Telecom ATP-CNX-040-01 - page 184

    B-8 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 CNX System Administrator Guide Example 2 The following example illustrate s the contents of log file cdrlog.2004-09-03.13.16.57.csv . This log file is still active. 1094217417,HEADER,1,RESTART 1094217417,SYS_RESTART 1094217494,CONF_ACT,256 1094217508,CALL_START,1,256,SIP,SIP/ 10.50.20.56-1015c980 1094217 ...

  • Aastra Telecom ATP-CNX-040-01 - page 185

    ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 B-9 Additional i nformation abo ut CDR logs Where are the CDR logs stored? When CDR logs are generate d, the Aastra CNX automatically stores the logs to the CompactFlash card for easy access and download when required. Y ou can download these logs to your local PC using the log file tools on the Maintain CNX ...

  • Aastra Telecom ATP-CNX-040-01 - page 186

    ...

  • Aastra Telecom ATP-CNX-040-01 - page 187

    ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 Index-1 Index A ad-hoc conference 4-8 announcement options 5-9 B baud rate 1-1 1 C CDR logs deleting 5-46 description 5-41 downloading 5-40 , 5-43 chassis description 2-4 cleanup of CNX 5-50 file types 5-49 CNX benefits of 2-2 cleaning up 5-49 cnx.cfg file 3-1 conference participa nt in 2-13 configuring usin ...

  • Aastra Telecom ATP-CNX-040-01 - page 188

    Index-2 ATP-CNX-040-01 Rel. 1.3, Doc. Rev . 01.07 Index G generating reports 2-14 H hardware, Aastra CNX 2-4 front panel 2-5 rear panel 2-7 L language packs loading 5-10 removing 5-13 languages supported in CNX 2-3 LED descriptions 2-5 , 2-6 license key 5-25 procedures for editing 5-26 M maintaining loading/removing cu stomized greetings 5-16 loadi ...

  • Aastra Telecom ATP-CNX-040-01 - page 189

    ...

  • Aastra Telecom ATP-CNX-040-01 - page 190

    Aastra CNX Conference Network Switch System Administrator Guide Published in the USA A TP-CNX- 040-01 Aastra CNX Release 1.3, Document Revision 01.07 June 2006 ...

Manufacturer Aastra Telecom Category Switch

Documents that we receive from a manufacturer of a Aastra Telecom ATP-CNX-040-01 can be divided into several groups. They are, among others:
- Aastra Telecom technical drawings
- ATP-CNX-040-01 manuals
- Aastra Telecom product data sheets
- information booklets
- or energy labels Aastra Telecom ATP-CNX-040-01
All of them are important, but the most important information from the point of view of use of the device are in the user manual Aastra Telecom ATP-CNX-040-01.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Aastra Telecom ATP-CNX-040-01, service manual, brief instructions and user manuals Aastra Telecom ATP-CNX-040-01. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Aastra Telecom ATP-CNX-040-01.

A complete manual for the device Aastra Telecom ATP-CNX-040-01, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Aastra Telecom ATP-CNX-040-01 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Aastra Telecom ATP-CNX-040-01.

A complete Aastra Telecom manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Aastra Telecom ATP-CNX-040-01 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Aastra Telecom ATP-CNX-040-01, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Aastra Telecom ATP-CNX-040-01, that we can find in the current document
3. Tips how to use the basic functions of the device Aastra Telecom ATP-CNX-040-01 - which should help us in our first steps of using Aastra Telecom ATP-CNX-040-01
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Aastra Telecom ATP-CNX-040-01
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Aastra Telecom ATP-CNX-040-01 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Aastra Telecom ATP-CNX-040-01?

Use the form below

If you did not solve your problem by using a manual Aastra Telecom ATP-CNX-040-01, ask a question using the form below. If a user had a similar problem with Aastra Telecom ATP-CNX-040-01 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)