English dropdown-ico

Manual Jasco 19200

9 pages 0.96 mb
Download

Go to site of 9

Summary
  • Jasco 19200 - page 1

    GE Model 19200 www.jascoproducts.com Wireless Portable Chime Installation Instructions for Wireless Portable Door Chime Kit Required Tools: Small flat blade screwdriver , drill, drill bit, and phillips screwdriver. Included Hardware: (2) 3x20mm screws (2) Double sided adhesive pads The portable wireless door chim e Kit has two components: Portable ...

  • Jasco 19200 - page 2

    Battery Release Tab 2. Install 4 C-cell batteries (we recommend Alkaline Batteries) 3. Remove back of wireless push button and install the 12-volt battery (included) as shown below. Chime Tune Setting All wireless chimes may have more than one push button. The chime tune for each push button is set with jumpers 7-9. Single Push Button Kit: If you p ...

  • Jasco 19200 - page 3

    and 9=off.) 3. Select the desired chime sound from the table below. Chime Sound Table Position 7 8 9 Westminster ON OFF OFF Ding Dong OFF ON OFF Knock OFF OFF ON Bronze Chime ON ON OFF Cuckoo Clock ON OFF ON Foghorn OFF ON ON Gong ON ON ON ON: Add a jumper to a location OFF: Remove jumper from a location. 4. Remove or add the jum pers to match the ...

  • Jasco 19200 - page 4

    Each component has jumpers for setting the house security code: The chime and pushbutton must be set to the same house security code for the combination to operate together. Note : The push button has 3 additional jum pers that are used to set the chime tune that will play. The chim e tune jumpers do not affect the house security code. 1. Remove po ...

  • Jasco 19200 - page 5

    3. Locate the House Security Code door and screw located on the back of the AC Chime. Remove the screw and take off the door. 4. Locate the chime and pushbu tton jumpers shown below. Push Button Jumpers Chime Jumpers in battery compartment 5. Jumpers 1-6 are used to select 1 of 64 possible home security codes. 6. To change the house code, add or re ...

  • Jasco 19200 - page 6

    b. Replacing the back cover 1. Push buttons are typically mounted at the same height as the door knob or handle (between 36" and 44" above the floor). 2. Before mounting, choose a mounting location that is not farther than 150 feet from the chim e unit location. ...

  • Jasco 19200 - page 7

    Not farther than 150 feet 3. Place the push button where you w ould like to mount it and with the chime as close to its final position as possi ble and test operati on. If it works, mount the button. If it does not work, see TROUBLESHOOTING. 4. Use back cover of push button as a template to mark two screw holes. 5. Drill two holes with 3/32” size ...

  • Jasco 19200 - page 8

    7. Press front housin g onto back cover. 8. Test operation. If the chime does not work, see TROUBLESHOOTING. Operation 1. Slide power switch to “High” or “Low” to power the chime. 2. Gently press transmitter button to sound chime. Troubleshooting Chime doesn't work: 1. Make sure push button switch is depressed and held for at least 1 s ...

  • Jasco 19200 - page 9

    For technical support contact Jasco Pr oducts Company at 1-800-654-8483 or www.jascoproducts.com Made in China is a trademark of General Electric Company and is used under license to Jasco Products Company LLC, 311 N.W. 122nd Street, Oklahoma City, OK 73114. www.jascoproducts.com Rev. 1-07 19200 ...

Manufacturer Jasco Category Door

Documents that we receive from a manufacturer of a Jasco 19200 can be divided into several groups. They are, among others:
- Jasco technical drawings
- 19200 manuals
- Jasco product data sheets
- information booklets
- or energy labels Jasco 19200
All of them are important, but the most important information from the point of view of use of the device are in the user manual Jasco 19200.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Jasco 19200, service manual, brief instructions and user manuals Jasco 19200. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Jasco 19200.

Similar manuals

A complete manual for the device Jasco 19200, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Jasco 19200 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Jasco 19200.

A complete Jasco manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Jasco 19200 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Jasco 19200, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Jasco 19200, that we can find in the current document
3. Tips how to use the basic functions of the device Jasco 19200 - which should help us in our first steps of using Jasco 19200
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Jasco 19200
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Jasco 19200 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Jasco 19200?

Use the form below

If you did not solve your problem by using a manual Jasco 19200, ask a question using the form below. If a user had a similar problem with Jasco 19200 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)