English dropdown-ico

Manual ACR Electronics Y1-03-0203

100 pages 4.43 mb
Download

Go to site of 100

Summary
  • ACR Electronics Y1-03-0203 - page 1

    ...

  • ACR Electronics Y1-03-0203 - page 2

    User Manual 2 Y1 - 03 -0203 Re v.L Please read this first! Warning: Although ACR striv es for accuracy in all its publications; thi s material may contain errors o r omissions, and is subject to chan ge without prior notice. ACR shall not be made li able for any specific, indirec t, incidental or con sequential da mages as a resul t of its use. ACR ...

  • ACR Electronics Y1-03-0203 - page 3

    User Manual 3 Y1 - 03 -0203 Re v.L 1 S TARTING THE NAUTICAST ............................................................................................... 5 1.1 Initial Set Up of the NAUTICAST for operation ................................................................................................... 5 1.2 Entering the MMSI and IMO Numbers . ...

  • ACR Electronics Y1-03-0203 - page 4

    User Manual 4 Y1 - 03 -0203 Re v.L History of Change s Date Version Rev. Status Comments Responsible 2002 - 12 - 04 1.0 A Released Latest release amend ments A. Lesch 2003 - 03 - 18 1.0 B Released Updated EC-Con formity Document inser ted. C. Moore 2003 - 03 - 27 1.0 C Released B553 picture update F. Gruber 2003 - 03 - 31 1.0 D Released New front c ...

  • ACR Electronics Y1-03-0203 - page 5

    User Manual 5 Y1 - 03 -0203 Re v.L 1 Starting the NA U TICAST 1.1 Initial Set U p of the NAUTICAST for operation ATTENTION: IM O REGULATIONS M ANDATE T HA T YOU ENTER T HIS INFORM ATION. After installing the antennas and hardw are the fol lowing User, Voy age related and Ship Settings data needs to be entered. Upon S tart-up (Applyi ng power) enter ...

  • ACR Electronics Y1-03-0203 - page 6

    User Manual 6 Y1 - 03 -0203 Re v.L 1.2 Entering the MMSI and IMO Numbers Select from the M ain Menu “Service Conf iguration” Numbe r 6 . Menu is SE RVICE passw ord protected (Please see Appendi x 7.2 for passwor d information). Enter Ser vice Passw ord and use the  ? ...

  • ACR Electronics Y1-03-0203 - page 7

    User Manual 7 Y1 - 03 -0203 Re v.L 1.3 Entering Ship Settings      (Please see Appendix 7.2 for password in formation).Enter Pas ...

  • ACR Electronics Y1-03-0203 - page 8

    User Manual 8 Y1 - 03 -0203 Re v.L GPS A NTENNA location on ship (is x in above M enu example) is loca ted 200 meters from bow (A) and 33 Meters from Starboard side (D). Note: W hen only using internal GPS antenna it is ok to have de fault values for ex ternal position since they are not used. Ref.Points e xt (Position of the external GPS a ntenna) ...

  • ACR Electronics Y1-03-0203 - page 9

    User Manual 9 Y1 - 03 -0203 Re v.L Scroll to the Voy age Setting Fiel ds with up and do wn arrow s and input your vessel data. Select a default Cargo Type, Drau ght, POB (Pers ons on board), Destinati on, ETA and Nav igation Status Setting usi ng the [Le ft] & [Right] arrow keys. Save the new settings by pressin g [Save], and return to the M ai ...

  • ACR Electronics Y1-03-0203 - page 10

    User Manual 10 Y1 - 03 -0 203 Rev.L Changing the Service Pass word                  ? ...

  • ACR Electronics Y1-03-0203 - page 11

    User Manual 11 Y1 - 03 -0 203 Rev.L Service Pass word Menu Example : Enter the new Password: Then push Enter (M 5). Repeat the new Password: Then Push Enter (M 5). A m inimum of 6, a maxi mum of 8 characters are allowed. Should t he new password include numbers, use the shift key to generate them. Press Save to s tore the change . Changing the User ...

  • ACR Electronics Y1-03-0203 - page 12

    User Manual 12 Y1 - 03 -0 203 Rev.L Enter the new Password. A m inimum of 6, a maximum of 8 characters are allowed. Should the new password incl ude numbers, use the shift key to generate them. Repeat the new Password. Press Save to s tore the changes . N48^12' E 16^26' |1> N/A|2> N/A|3> N/A ********* Change User Password ******* ...

  • ACR Electronics Y1-03-0203 - page 13

    User Manual 13 Y1 - 03 -0 203 Rev.L 2 NAUTICA ST User Interface Soft Keys [M1] – [M8] Display Safety Keys Cursor Cross Enter Key Keyboard Navigation Screen Header (max. 3 lines) _________________ Navigation Screen or MENU Structure (Content 13 lines) ...

  • ACR Electronics Y1-03-0203 - page 14

    User Manual 14 Y1 - 03 -0 203 Rev.L 2.1 NAUTICAST Keyboard The NAUTICAS T is fitted w ith a full alphanumeric keyboard, wi th the following functions : By pressing any key on the key board the letters a re addressed. Number symbol s and special characters are addr essed by holdi ng down the shift [  ] key and simultaneously pressing the chose n ...

  • ACR Electronics Y1-03-0203 - page 15

    User Manual 15 Y1 - 03 -0 203 Rev.L 2.4 Explanation of the Soft Key s The Soft Key s are divided into vertical static keys [M1-M4] and horizontal d ynamic keys [M 5-M8], which differ in function accordi ng to the curren t application. Soft Key Definition [M1] filter option on AIS targets in graphica l view FA ( hides recei ved Class A tar gets) FB ...

  • ACR Electronics Y1-03-0203 - page 16

    User Manual 16 Y1 - 03 -0 203 Rev.L 3 NAUTICA ST Screens The advanced versi on of the NAUTICAST offers three di spla y modes: Navigation Screen - Standard screen, au tomatically visible Menu Structu re - Visible after pressing the [Menu] Sof t Key Graphical User Inte rface - The Graphical User Int erface is visible after press ing the [M2] Sof t Ke ...

  • ACR Electronics Y1-03-0203 - page 17

    User Manual 17 Y1 - 03 -0 203 Rev.L 3.1.1 Own Vessel Data LAT:N 1°27.845'ExtSOG:34.6kn 05/26/06 LON:E 0°21.289'ExtCOG:173.0° 10:52:26 LAT: Latitude LON: Longitude Date: The actual UTC - date (MM .DD.YY) and time (h h.mm.ss) are displ ayed on the top right hand corne r of this v iew. IntGPS: 3D A/ ExtHDT:222° Reg6 IntGPS Indicates norm ...

  • ACR Electronics Y1-03-0203 - page 18

    User Manual 18 Y1 - 03 -0 203 Rev.L 3.1.2 Other Vessel Data 001/021..S HIP N AM E ....RNG.BRG..S OG..COG.. 001/021 (E.g: Vessel 01 of 021) curren t or selected Vessel / Total number o f Vessels (max . 256 Vessels) ShipName: Name of the Ship and AIS  Type: Cl - A: SOLAS Class-A Ship Cl - B: Leisure Craft Base: Base station SAR : Search and Rescu ...

  • ACR Electronics Y1-03-0203 - page 19

    User Manual 19 Y1 - 03 -0 203 Rev.L 3.1.4 Other Vessel Deta ils This screen show s the Dyna mic, Voyage and Ves sel Related Data, w hich is currently being transmitted by a previousl y selected vessel . Current Time and Selected Vessel Number in Vessel Listing: Time 2:07 ------ ---------- POS: 00 01/0021 Time : The period of time which has elapsed ...

  • ACR Electronics Y1-03-0203 - page 20

    User Manual 20 Y1 - 03 -0 203 Rev.L Reference Point (in meters): This information indi cates the Re ference Point o f the used GPS Antenna onboard the vessel. RefPoint:A190 B120 C10 D<63m A: 190m B: 120m C: 10m D: <63m (means more than 63m in the case o f a very large vessel) Vessels Cargo: Indicates the t ype of cargo on board. N/A or harmle ...

  • ACR Electronics Y1-03-0203 - page 21

    User Manual 21 Y1 - 03 -0 203 Rev.L 3.2 Menu Structure To call up the M ain M enu, press the [Menu] but ton once, and all Sub menus are displ ayed. The cursor position indi cates the selec ted submenu. Menu navi gation is achiev ed by pressing the [Up] or [Down] keys to select, and then by pressing [Enter] to con firm the desi red Submenu selection ...

  • ACR Electronics Y1-03-0203 - page 22

    User Manual 22 Y1 - 03 -0 203 Rev.L 3.4 Sub-Menus Overview 3.4.1 Messages 3.4.2 A IS Status 3.4.3 Voyag e Settings – (User Password Pro tected) N 1 o 19' E 0 o 12' |1>0.10|2>1.30|3>1.80nm | 1. Messages -----| | | + - 1. Write Addressed SRM View | + - 2. Write Broadcast SRM | + - 3. Lock Request | + - 4. Inbox History -----| + - ...

  • ACR Electronics Y1-03-0203 - page 23

    User Manual 23 Y1 - 03 -0 203 Rev.L 3.4.4 Ship Settings – (User Pass word Protected) 3.4.5 Configuration – (User Pass word Protected) 3.4.6 Service Configura tion – (Service Pass w ord Protected) N48^12' E 16^26' |1> N/A|2> N/A|3> N/Anm ************ Ship Settings ************* Call Sign:OEZ1234 / + ShipName :SOLAS 55 / | ...

  • ACR Electronics Y1-03-0203 - page 24

    User Manual 24 Y1 - 03 -0 203 Rev.L Display Settings 3.4.7 Graphical Disp lay Settings 3.5 Sub-Menus Detailed 3.5.1 Messages N 1 o 21' E 0 o 15' |1>0.10|2>1.30|3>1.80nm *********** Display Settings *********** Mode | +- [*] Day Min Max | +---- Brightness:<9> [*********] | + ---- Contrast : 6 [****** ] | | +- [ ] Night Min M ...

  • ACR Electronics Y1-03-0203 - page 25

    User Manual 25 Y1 - 03 -0 203 Rev.L Dynamic Key s: Messages [M5] [Select] Select chosen Submenu [Enter] Confirm M essage Submenu Selection [M8] [Back] Return to Mai n Menu Screen [Up] / [Down] Navi gate Submenu for Selection Writing Message s: This screen prov ides a means to w rite and send mes sages. It is possible to selec t betwee n an Addresse ...

  • ACR Electronics Y1-03-0203 - page 26

    User Manual 26 Y1 - 03 -0 203 Rev.L Dynamic Key s: Messages [M5] [Select] Write M essage to Selected Vessel [Enter] Write M essage to Selected Vessel [M8] [Back] Return to Messa ges Menu b) Using the NAU TICAST Messa ge Editor After selecting a v essel, the M essage Editor is aut omatically displayed. Messages containin g a max imum of 156 cha ract ...

  • ACR Electronics Y1-03-0203 - page 27

    User Manual 27 Y1 - 03 -0 203 Rev.L c) Confirmation o f Sent Addressed M essage The confirma tion screen show s the successful me ssage transmissi on and indicates w hich channels (AIS1 or AIS2) were used. Successful Message Transmiss ion on Channe l AIS1:  ? ...

  • ACR Electronics Y1-03-0203 - page 28

    User Manual 28 Y1 - 03 -0 203 Rev.L       ...

  • ACR Electronics Y1-03-0203 - page 29

    User Manual 29 Y1 - 03 -0 203 Rev.L e) Confirmation o f Broadcast Sent M essage This Confirmation Screen show s that the messa ge was successfully transmitted on the Broadcast Setting. By pressing [Back] the u ser automatical ly returns to the Messa ge Editor for fur ther Messaging. The [SendTo] returns the user to the Vessel Listin g, with the opt ...

  • ACR Electronics Y1-03-0203 - page 30

    User Manual 30 Y1 - 03 -0 203 Rev.L f) Long Range Interroga tion Mobile, and shore -based stations hav e the ability to interrogate vesse ls and make re quests for informat     ? ...

  • ACR Electronics Y1-03-0203 - page 31

    User Manual 31 Y1 - 03 -0 203 Rev.L An LRI has arriv ed; The NAUTICAS T Settings are con figured to Automatic Mod e: Dynamic Key s: LRI in the Inbox History (automatic mode) [M5] [OK] Confirms that LRI has been seen [M8] [Back] Return to Message M enu [M7] [Reply ] Send Addressed Message to LRI sender Upon activation o f the [OK] button , the user ...

  • ACR Electronics Y1-03-0203 - page 32

    User Manual 32 Y1 - 03 -0 203 Rev.L Dynamic Key s: LRI in the Inbox History (manual mode) [M5] [OK] Accept LRI  [M7] [Reply ] Send Addressed Message to LRI Sender [M6] [Reject] Reject LR  [M8] [Back] Return to Messages M enu g) Inbox History The Inbox History provides a means to readin g incoming messa ges and alarms. The messages ar ...

  • ACR Electronics Y1-03-0203 - page 33

    User Manual 33 Y1 - 03 -0 203 Rev.L Inbox History: Overview of Received M essages and Alarms Message Ty pes: Description ASRM Addressed Safety Related M essage BSRM Broadcast Sa fety Related M essage ALR Alarms (Details  see Alarm Type s chapter 5.2) LRI Long Range Inte rrogation Message Status : * Marks a new , unacknowledged mes sage or alarm ...

  • ACR Electronics Y1-03-0203 - page 34

    User Manual 34 Y1 - 03 -0 203 Rev.L ASRM 13:43 PIRA TE ATTACK! 5264 Addressed Safety Related M essage, acknowledged by recipi ent, arrived at 13:43, with tex t     ASRM*13:42 HI GH WINDS IN AREA! 5004 Addressed Safety Rel ...

  • ACR Electronics Y1-03-0203 - page 35

    User Manual 35 Y1 - 03 -0 203 Rev.L ASRM: Information Time 17:39 Date 11/26 (mm.dd) POS 01/02 (M essage 01 of 02) Message Ty pe AddressedSRM Status * (not acknow ledged) MMSI o f Sende r 5004 Channel Incoming AIS Chann el ACK Message not yet acknowledged A LR – Reading Incoming A l arms: ALR: Information Time 17:36 Date 11/26 (mm.dd) POS 01/1 Mes ...

  • ACR Electronics Y1-03-0203 - page 36

    User Manual 36 Y1 - 03 -0 203 Rev.L 3.5.2 A IS Status The AIS Status Menu prov ides a variety of information conce rning own vessel set tings, as well as the current A IS status of the o ther vessels, which are displ ayed in the Ves sel Listing. Version Info prov ides detail s of the actual softw are release cur rently installed . Security Lo g tra ...

  • ACR Electronics Y1-03-0203 - page 37

    User Manual 37 Y1 - 03 -0 203 Rev.L Mod.: A IS Transmission Mode AU Autonomous AS Assigned IN Interrogation/Pol led Mode ?? Unknown Used Channel AIS1, AIS2 Syn.: (UTC source ) D UTC direct I UTC indirect B Sync to Base A Sync to mobile w ith the most re ceived stations (Semaphore) RXVe: Total number o f all receiv ed stations by the individual vess ...

  • ACR Electronics Y1-03-0203 - page 38

    User Manual 38 Y1 - 03 -0 203 Rev.L Own Vessel Posi tion: LAT : N 1°18 .901' LON : E 0°12.345' Heading and Ro tation of o wn vessel: Heading :77 o ROT : +5.4 ° IMO-Number and MMSI of own vessel: IMO No. : 9100254 MMSI: 257530700 Name and CallS ign of o wn vessel: ShipName: M YLADY CS: D11233 Vessel Ty pe: Pilot vessel Length and Bea m ...

  • ACR Electronics Y1-03-0203 - page 39

    User Manual 39 Y1 - 03 -0 203 Rev.L c) Version Info This Screen show s the actual So ftware Release which is being run on the NAUTICAST. d) Security Log The Security Lo g is implemented to show the    times o f the transponde r. In standard opera tion, this Lo g should not contain any entries. N48^12&apo ...

  • ACR Electronics Y1-03-0203 - page 40

    User Manual 40 Y1 - 03 -0 203 Rev.L 3.5.3 Voyag e Settings (User Pass word Protected) NOTE: The de fault passw ord from the factory is mentioned on your A IS display at the protection foil. (see Appendi x 0 for password in formation).! Before enterin g Voyage Related D ata for initial NAUTICAS T operation, it is adv ised to configure the User Passw ...

  • ACR Electronics Y1-03-0203 - page 41

    User Manual 41 Y1 - 03 -0 203 Rev.L Voyag e Settings Entries After a new User Password has been set, Voy age Settings may be input. A selection is made with the     ? ...

  • ACR Electronics Y1-03-0203 - page 42

    User Manual 42 Y1 - 03 -0 203 Rev.L Data Input Modes Voyag e Setting Description Input Modus Cargo Cargo Catego ry Default Setting <Selection > N/A or harmless DG, HS or M P (category A) DG, HS or M P (category B) DG, HS or M P (category C) DG, HS or M P (category D) Draught Maximum present static draught Manual inp ut PoB Number of persons o ...

  • ACR Electronics Y1-03-0203 - page 43

    User Manual 43 Y1 - 03 -0 203 Rev.L 3.5.4 Ship Settings (User Pass word Protected) After a new User Password has been set, the Shi p Settings may be input. The Ship Settings are usually only set once, upon NAUTICA ST initial operation. A selection is made with the cursor buttons [Up] or [Down] for input field selection. The category  ...

  • ACR Electronics Y1-03-0203 - page 44

    User Manual 44 Y1 - 03 -0 203 Rev.L Input Modes fo r Ship Setting s Ships Setting Description Input Modus Call Sign Ships Call Sign Manual inp ut Ship Name Ships Name Manual inp ut Length Length of ship Manual inp ut Beam  Manual inp ut RefPntExt: Position reference points for ex ternal positioning devi ce (GPS ante ...

  • ACR Electronics Y1-03-0203 - page 45

    User Manual 45 Y1 - 03 -0 203 Rev.L After the Ship Set tings hav e been input and sav ed, this screen appea rs . [Exit] takes the use r back to the Mai n Menu. GPS A ntenna Mounting It is important to input the ex act mounting posi tion of the GPS Antenna on the vessel as this influences the accu racy o f the displayed target in an ECDIS. (Ref.P oi ...

  • ACR Electronics Y1-03-0203 - page 46

    User Manual 46 Y1 - 03 -0 203 Rev.L Sample: Display: CallSi gn = D11233 ShipName = M /V TUGELA Length = 200m Beam = 30m RefPointExt = A170 B30 C15 D15m (location of th e external GPS antenna ) RefPointInT = A171 B 29 C 0 D 30 m (location of th e internal GPS an tenna) ShipType = Tug Setting of the exter nal GPS antenna po sition: A = 170m the dis t ...

  • ACR Electronics Y1-03-0203 - page 47

    User Manual 47 Y1 - 03 -0 203 Rev.L 3.5.5 Transpond er Configuration (User Password Pr otected) The Configura tion Menu all ows the user to alter the hardware-based para meters. User Passw ord Configuration is also undertaken here . A ccessing the Configuration Settings: The Configura tion Menu is User Passw ord protect ed. NOTE: The de fault passw ...

  • ACR Electronics Y1-03-0203 - page 48

    User Manual 48 Y1 - 03 -0 203 Rev.L Accessing the Con figuration Menu with the defaul t User Passw ord Dynamic Key s: Input of Default Use r Pass word to Acces s Configuration [M5] [Enter] Confirm De fault User Password Input [M8] [Exit] Return to Vessel Listing Incorrect User Pas sword Inpu t If the incorrect User Passw ord is input, the scre en b ...

  • ACR Electronics Y1-03-0203 - page 49

    User Manual 49 Y1 - 03 -0 203 Rev.L a) Change User Pas sword (for initial NAUTICAST Operation) It is strongly recommended to chan ge the de fault User Passw ord upon initial NAUTICAST operatio n. A minimum o f 6, a maximum o f 8 characters are allowed. Shoul d the new passw ord include numbers, use the shift key to generate them. Dynamic Key s: Ini ...

  • ACR Electronics Y1-03-0203 - page 50

    User Manual 50 Y1 - 03 -0 203 Rev.L This screen appears if the new User Passwords a re mismatched - i.e. the New User Passw ord and the Repeated New User Passw ord are not identical . In this case, i t is possible to re-input bo th the New and Repe ated User Pas swords again. [Exit] takes the user back to the User Passw ord Input Screen . Dynamic K ...

  • ACR Electronics Y1-03-0203 - page 51

    User Manual 51 Y1 - 03 -0 203 Rev.L b) Region Settin gs A Region is a de fined area , with specific VHF parameters, w hich are sent out by Vessel Traffic Service Stations (VTS), and receiv ed via Di gital Selectiv e Calling ( DSC) or AIS. The screen show s a list o f Regions, and their input sources. W hen the vessel enters into one of th e pre-def ...

  • ACR Electronics Y1-03-0203 - page 52

    User Manual 52 Y1 - 03 -0 203 Rev.L Creating a Ne w Region Parameters for setting up a new Region can be entered and sav ed here. Dynamic Key s: Initial User Pass word Setting [M5] [Save] Confirm Region Data Input [M8] [Back] Return to Region Listing Inputting Region Settings : Mode of Latitude and Lo ngitude Input: Example : 44 Degrees, 13.1234 mi ...

  • ACR Electronics Y1-03-0203 - page 53

    User Manual 53 Y1 - 03 -0 203 Rev.L c) Alarm Settin gs This screen all ows the user to enabl e or disabl e the generation and displ ay of Alarm s. Alarms are display ed in the Alarm Inbox (see Menu 5: Transponde r Configuration, Sub menu 3: Alar m Settings) and on the ECDIS screen. Note : It is highly recommended to enab le the Alarm Fun ction. Dyn ...

  • ACR Electronics Y1-03-0203 - page 54

    User Manual 54 Y1 - 03 -0 203 Rev.L Dynamic Key s: LR Interrogat ion Settings [M5] [Save] Save LRI Settin gs [Up] / [Down] Select Data Fiel d for Configura tion [M6] [Change] Enable or Disabl e selected Field for Interrogation [Enter] Select Data Fiel d for Configura tion [M7] [A ll On] Configure All Data for Interro gation [Left] / [Right] Enable ...

  • ACR Electronics Y1-03-0203 - page 55

    User Manual 55 Y1 - 03 -0 203 Rev.L Dynamic Key s: Reply ing to a LR Interrogation [M5] [OK] Notifies User o f current interrogation [M8] [Back] Return to Vessel Listing [M7] [Reply ] Display Message Editor for LRI Reply Sensor Settings The screen provi des the means to switch the sen sor speeds. It allow s the user to change sensor interfaces fro ...

  • ACR Electronics Y1-03-0203 - page 56

    User Manual 56 Y1 - 03 -0 203 Rev.L Use this menu to set up the data speed 4800/960 0/38400 baud. NOTE: This Con figuration should be done from adv anced user like install ation technicians only. Therefore you will find more de tails in the installat ion manual. During the con figuration process , the NAUTICAST is not operational. GPS Settings (Ser ...

  • ACR Electronics Y1-03-0203 - page 57

    User Manual 57 Y1 - 03 -0 203 Rev.L 3.5.6 Service Configura tion (Serv ice Password Protec ted) The Service Co nfiguration M enu allows ini tial configuration of the Serv ice Password, Passw ord Settings (on/off), MMS I/IMO Numbers and the option of reset ting the NAUTICAST to Factory Settings. The Service Passw ord is required in orde r to enter t ...

  • ACR Electronics Y1-03-0203 - page 58

    User Manual 58 Y1 - 03 -0 203 Rev.L a) Change Serv ice Password This screen prov ides a means to indiv idually configure the Serv ice Password. This password di ffers     ...

  • ACR Electronics Y1-03-0203 - page 59

    User Manual 59 Y1 - 03 -0 203 Rev.L b) User Password Set tings Change User Pass w ord Protection : This function all ows the user to enabl e or disabl e the User Passw ord Query Function. For security reasons, it is hi ghly recommended to enable Use r Password Pro tection in order to avoid unauthorized Transpon der operation. After the settin gs ha ...

  • ACR Electronics Y1-03-0203 - page 60

    User Manual 60 Y1 - 03 -0 203 Rev.L c) Changing the MM SI / IMO Nu mbers This screen prov ides a means to chan ge the MM SI and IMO Number s; the input fields are limited to a maximum o f 9 characters. Dynamic Key s: Change MMSI / IMO [M5] [Save] Save MM SI/IMO Number Input [Enter] Navi gate Data Input Fields (up/dow n) [M8] [Back] Return to Submen ...

  • ACR Electronics Y1-03-0203 - page 61

    User Manual 61 Y1 - 03 -0 203 Rev.L After pressing [OK ], the Data Sav ed Screen con firms the Resto re Factory Settings command. Note: The NA UTICA ST has been restored to the Factory Settings! Now please con figure y our: - Ship Settings - Voyag e Settings - User Password - Service Pass word 3.5.7 Display Settings It is possible to choo se from D ...

  • ACR Electronics Y1-03-0203 - page 62

    User Manual 62 Y1 - 03 -0 203 Rev.L Dynamic Key s: Display Settings [M5] [DayNigh t] Switch between Da y or Night Settings [Enter] Switch betwee n Day or Nigh t Settings [M8] [Back] Return to Main Menu [Up] / [Down] Navi gate Input Fields [Left] / [Right] Regulate M odes (min/max) NOTE: The Bri ghtness and Contra st Setting can be di rectly changed ...

  • ACR Electronics Y1-03-0203 - page 63

    User Manual 63 Y1 - 03 -0 203 Rev.L Dynamic Key s: graphical user in terface [M1] filter option on AIS targets in graph ical view FA (hides receiv ed Class A targets) FB (hides receiv ed Class B targets) [M2] Switch betwee n the views from the Navigation Sc reen press the button the 1 st time wi ll lead you to the Rad ar View press it the 2 nd time ...

  • ACR Electronics Y1-03-0203 - page 64

    User Manual 64 Y1 - 03 -0 203 Rev.L pressing [M2] leads to R adar View pressing [M2] leads to Fair way Vie w pressing [M2] leads y ou back to Navigation S creen ...

  • ACR Electronics Y1-03-0203 - page 65

    User Manual 65 Y1 - 03 -0 203 Rev.L 3.6.2 The Radar Vie w This screen provides the user with a commonly used way of representing ship objects on an electronic device. T he Radar View is northern orientated, as indicated by the compass on the very right top of the screen. The Elements o f the Radar Vie w : Own Ship: A symbol for t he own ship is dis ...

  • ACR Electronics Y1-03-0203 - page 66

    User Manual 66 Y1 - 03 -0 203 Rev.L Dynamic Key s: Radar Vie w [M1] Set filter option on AIS Targets [M2] Switch betwee n the views [M3] Show al arm window [M5] Acknowledge alar ms or sa fety related messages (SRM ) [M7] Acknowledge SRM and reply [Menu] Selects the M ain Menu [Up] / [Do wn] / [Left] / [Righ t] Activate the mini mized radar v iew [F ...

  • ACR Electronics Y1-03-0203 - page 67

    User Manual 67 Y1 - 03 -0 203 Rev.L Scrolling Since the outer distanc e ring does not completel y fit into the (rectan gle) display, it is possible to scroll the view from North or South. The maximum scrolling distance is limited to the radius of the outer distance rin g in the current zoom level . The view can be scrolled by 2 steps in each direct ...

  • ACR Electronics Y1-03-0203 - page 68

    User Manual 68 Y1 - 03 -0 203 Rev.L The Minimized Radar Vie w The minimiz ed radar view shows a split screen. On the left hand si de a Shi p List is displayed, on the right hand side a minimized v iew of the Radar View is visi ble. This view will be display ed, if one of the cursor key s is pressed. The difference betw een the minimiz ed, and the l ...

  • ACR Electronics Y1-03-0203 - page 69

    User Manual 69 Y1 - 03 -0 203 Rev.L Ship Details If a t arget is selected by pressing [Enter ], whether in t he Ship List or direc tly in the graphical view, the correspondin g ship details are displayed i nstead of the minimiz ed view. Pressing [Up] o r [Down] scrolls the ship detail li st by line, [Left] or [Right] by page. [M8] returns to th e m ...

  • ACR Electronics Y1-03-0203 - page 70

    User Manual 70 Y1 - 03 -0 203 Rev.L The Elements in the Fair way Vie w: Compass: Shows the current COG. Fairway Lines : The Fairw ay Lines are border lines of a virtual fairway oriented on the actua l course over ground. A IS-Targets : Other AIS targets received via VHF are displayed, if their distance is within t he range of the current zoom lev e ...

  • ACR Electronics Y1-03-0203 - page 71

    User Manual 71 Y1 - 03 -0 203 Rev.L Zoom Level 2 would look l ike this: The Minimized Fairway Vie w The minimiz ed Fairway View shows a split scree n. On the left hand side a Ship List is display ed and on the right hand side a minimiz ed Fairway View is seen. This vi ew is display ed, if one of the cursor keys is pressed . Fairway View  [Up] | ...

  • ACR Electronics Y1-03-0203 - page 72

    User Manual 72 Y1 - 03 -0 203 Rev.L The Elements in the Minim ized Fair way View: “Message W rite” Button: By pressing the [M4] button, a message could be sent to that AIS-Target that is currently selected in the Ship List. Ship List: This list show s the same targets as shown in the N avigation Screen. Ship List / Mini mized Vie w Switch: This ...

  • ACR Electronics Y1-03-0203 - page 73

    User Manual 73 Y1 - 03 -0 203 Rev.L 3.6.4 Message and A larm Handling A larms If an alarm occurs , the sy mbol to the right o f the [M 3] button becomes visi ble. Pressing the [M 3] button show s the details of the selected alert. Pressing [ M5] leads to alarm acknow ledgement and the closure of the window as well as the alarm icon disappearing. An ...

  • ACR Electronics Y1-03-0203 - page 74

    User Manual 74 Y1 - 03 -0 203 Rev.L 3.6.5 Configuration of the Grap hical Display General The configuration of the Graphical Display could be accessed over the entry point 8 of the Main Menu. The Configura tion Menu all ows the user to alter the parameters o f the Gra phical Display . A ccessing the Configuration Settings: The Configura tion Menu i ...

  • ACR Electronics Y1-03-0203 - page 75

    User Manual 75 Y1 - 03 -0 203 Rev.L Inside the Graphical Display Setting you can cho ose out of 4 diffe rent Sub-Menus. Sub-Men u Content Fairway View Scale Settings of the Geometry and Scal e of the Fairway View Fairway View Symbols Symbol settin gs of the Fai rway View (also the minimized Fairway View ) Radar View Symbols Symbol settin gs of the ...

  • ACR Electronics Y1-03-0203 - page 76

    User Manual 76 Y1 - 03 -0 203 Rev.L Parameter descr iption: Parameter Description Angle(A)    Value range: 2° to 178° Dim(B) The parameter Di m(B) de fines the width o f the fairw ay in percent of the horizon tal line. Please en ...

  • ACR Electronics Y1-03-0203 - page 77

    User Manual 77 Y1 - 03 -0 203 Rev.L The f ollowi ng drawing illustrates the paramete rs from the Fairway View S cale Menu and additionally presents the trans formation proces s from the Rad ar View to the Fai rway View . 10 nm Horizontal line 260° 325. 0° 30° 5 nm 15 nm DIM(B) f 1 f ' 2 Zero-line DIM(C) Dim(D) f 2 0° s A ngle( A) N COG 5 1 ...

  • ACR Electronics Y1-03-0203 - page 78

    User Manual 78 Y1 - 03 -0 203 Rev.L Fairway View Symbols Dynamic Key s: Fairway View Symb ols [M5] [Save] Save the settin gs [M8] [Back] Return to Graphical Display M enu The symbols for the own ship and for other tar gets could be selected individual ly. The follow ing symbols are avai lable: Parameter Symbol Standard Standard + Vecto rs Standard ...

  • ACR Electronics Y1-03-0203 - page 79

    User Manual 79 Y1 - 03 -0 203 Rev.L Radar Vie w Symbols Dynamic Key s: Radar Vie w Symbols [M5] [Save] Save the settin gs [M8] [Back] Return to Graphical Display M enu Parameter Symbol Standard Standard + Vecto rs Standard Solid Standard Solid + Vectors Solid Reduced (3x3) Note: Other symbols (i.e.: for a Base Station) are fixed N53°31 E10° 1 |1& ...

  • ACR Electronics Y1-03-0203 - page 80

    User Manual 80 Y1 - 03 -0 203 Rev.L Other Settings Inside this menu it is possible to adjust the graphical v iew to your demand. The availabl e functions cover the topics: o AIS-target filte r settings o Enabling / disabli ng the Auto Zoo m feature w ith max. number of ships o Alarm appearance Dynamic Key s: Other Settings [M5] [Save] Save the sett ...

  • ACR Electronics Y1-03-0203 - page 81

    User Manual 81 Y1 - 03 -0 203 Rev.L Save On all of t he described options inside the Configuration of the Graphical User Interface you could save you r settings by pressi ng the [M2] Button. Dynamic Key s: Other Settings [M5] [Save] Save the settin gs [M8] [Back] Return to Graphical Display M enu 4 Safety Functions The NAUTICAS T is fitted w ith Sa ...

  • ACR Electronics Y1-03-0203 - page 82

    User Manual 82 Y1 - 03 -0 203 Rev.L 4.1 MOB Person over Board By pressing the MOB button the cu rrent naviga tion position of own vessel and time of incident is     ...

  • ACR Electronics Y1-03-0203 - page 83

    User Manual 83 Y1 - 03 -0 203 Rev.L The desired Dis tress Message Text can be sel ected by pressin g the appropria te number on the keyboard. By pressing the [Exi t] button, it is possi ble to escape from this screen w ithout sending th e SRM Messa ge. NOTE: If no message subj ect is selected, the message is automat ically sent as an undesignated d ...

  • ACR Electronics Y1-03-0203 - page 84

    User Manual 84 Y1 - 03 -0 203 Rev.L Dynamic Key s: Send SRM Message [M5] [Send] Send selected SRM Messa ge [M8] [Back] Return to SRM Message Selection Confirmation o f sent SRM: Upon sending the SRM to all v essels the Broadca st Transmission Status is show n. The Broadcast Transmission S tatus Screen show s confirmation o f sent message and all ow ...

  • ACR Electronics Y1-03-0203 - page 85

    User Manual 85 Y1 - 03 -0 203 Rev.L NOTE: The SRM message t ransmission is auto matically repeated every 180 seconds until the [Sto p] button has been pre ssed. Each SRM Message that is sen t out every 180 se conds contains upda ted navi gation information o f own v essel position and actual time. Dynamic Key s: SRM Messa ge View [M5] [Stop] Discon ...

  • ACR Electronics Y1-03-0203 - page 86

    User Manual 86 Y1 - 03 -0 203 Rev.L 5 Troublesho oting 5.1 Reading and understanding Alarms: The NAUTICAS T differentiates be tween Alarm and TXT messa ges. An Alarm informs the user about major system malfunctions and failings in the connected sensors . The Alarm Sta tus informs the user about all ac tive Alarms. The Al arm wil l be disabled and d ...

  • ACR Electronics Y1-03-0203 - page 87

    User Manual 87 Y1 - 03 -0 203 Rev.L 5.2 A larm Codes ID Description Text Cause/Source System Reaction / Remedy 01 AIS: Tx malfunction VHF Antenna, cabling Reaction: The tra nsponder uni t stops transmis sion. If Alarm ID 01 and ID 02 are simultan eously display ed, then a major antenna proble m has arisen. Remedy: Check if the an tenna is AIS co mp ...

  • ACR Electronics Y1-03-0203 - page 88

    User Manual 88 Y1 - 03 -0 203 Rev.L 53 AIS: BATTERY SOON LO W Battery is soon out of capacity Reaction: Ow n ship data is los t after pow ering on/off the sy stem. Remedy: consider to contact Tech nical Support for ad ditional help 55 AIS: PRESS ENTER TO EXIT 1 W /AUTO TX MODE Conditions for enabling 1 Watt TX power are not valid Reaction: Conditio ...

  • ACR Electronics Y1-03-0203 - page 89

    User Manual 89 Y1 - 03 -0 203 Rev.L 6 Contact and Support Informat ion Contact your loca l dealer for NAU TICAST support. Please see our ACR W ebsi te for Servi ce Listing. A CR Electronic s Europe GmbH Mariahilfer Straße 50/2/11 A-1070 Vienna, Austria Tel: +43 (1) 5 237 237 - 0 Fax: +43 (1) 5 237 237 - 150 Email: Technical.Support@acr-europe.com ...

  • ACR Electronics Y1-03-0203 - page 90

    User Manual 90 Y1 - 03 -0 203 Rev.L 7 Appen dix 7.1 Explanation of commonly used Abbrev iations Abbreviation Full Text Abbreviation Full Text A/B (A+B) AIS Channel 1 / AIS Chan nel 2 IntGPS Internal Global Positioning Syste m ACK Acknow ledgement LAT Latitude AddrChM Addressed Channel Managemen t LON Longitude AIS Automatic Identification System LR ...

  • ACR Electronics Y1-03-0203 - page 91

    Bundesrepubli k Deutschland Federal Republic of Germany Bundesamt für Seeschifffahrt und Hydrographie Federal Maritime and Hydrographic Agency BUNDESAMT FUR SE ESCH I FFFAH RT UND HYDROC RAPH I E (No & item designation) i '' ","5": [No Ö( l.erTr oeslgrlauon' - x - ^ l=t f .on "- Product Name ' ruedlc ...

  • ACR Electronics Y1-03-0203 - page 92

    EC TYPE EXAMINATION CERTIFICATE No. BSH/461214321220109 Page2o'f 2 Gomponents necessary for operation: Components necessary fof operation Part No. Remarks NAUTICASTTM AIS 2607 Software-Version: 2.0.S1 05 Connection Box 2640 GPS Antenna AIS-A W/SM Coax 2639 VH-3200 VHF Stainless Steel Whip Antenna 91.4cm (36in) 2628 or equivalent The intemal GP ...

  • ACR Electronics Y1-03-0203 - page 93

    ...

  • ACR Electronics Y1-03-0203 - page 94

    ...

  • ACR Electronics Y1-03-0203 - page 95

    Annex to EC QUALTTY SYSTEM (MODULE D) CERTTFTCATE No. BSH I 46131051021 1251 109 BUNDESAMT FüR SEESCHIFFFA}IRT UNI) HYDROGRAPII I E Item Module B Certificate data Registration number date of issue date of expiry Notified Body USCG Approval No. 4.111.2c Position-indicating lights for life-saving appliances: - for lifejackets HL8-10 BSH/46'12/1 ...

  • ACR Electronics Y1-03-0203 - page 96

    EG - Konformitätserklärung EC - Declaration of Conformity Diese Konfor mitätserklärung best ätigt, dass das unten benannte Produkt den Auflagen der EC Council Directive 96/98/EC vom 20 Dezember 1996 f ür m aritime Ausrüstung, geändert durch die EC Council Directive 2002/75/EC vom 2. September 2002 entsprich t un d von der benannten Stelle N ...

  • ACR Electronics Y1-03-0203 - page 97

    EG - Konformitätserklärung EC - Declaration of Conformity Diese Konformitätserklärung bestätigt, dass das unten benannte Zubehör gleich oder besse r dem im untenstehenden Zertifikat ausgewiesenen Zubehör ist. This declaration of conformity certifies that the mentioned accessory is equal or better to th e equipment stated in the beyond Certif ...

  • ACR Electronics Y1-03-0203 - page 98

    EG - Konformitätserklärung EC - Declaration of Conformity Diese Konformitätserklärung bestätigt, dass das unten benannte Zubehör gleich oder besse r dem im untenstehenden Zertifikat ausgewiesenen Zubehör ist. This declaration of conformity certifies that the mentioned accessory is equal or better to th e equipment stated in the beyond Certif ...

  • ACR Electronics Y1-03-0203 - page 99

    EG - Konformitätserklärung EC - Declaration of Conformity Diese Konformitätserklärung bestätigt, dass das unten benannte Zubehör gleich oder besse r dem im untenstehenden Zertifikat ausgewiesenen Zubehör ist. This declaration of conformity certifies that the mentioned accessory is equal or better to th e equipment stated in the beyond Certif ...

  • ACR Electronics Y1-03-0203 - page 100

    EG - Konformitätserklärung EC - Declaration of Conformity Diese Konfor mitätserklärung best ätigt, dass das unten benannte Produkt den Auflagen der EC Council Directive 96/98/EC vom 20 Dezember 1996 f ür m aritime Ausrüstung, geändert durch die EC Council Directive 2002/75/EC vom 2. September 2002 entsprich t un d von der benannten Stelle N ...

Manufacturer ACR Electronics Category Marine RADAR

Documents that we receive from a manufacturer of a ACR Electronics Y1-03-0203 can be divided into several groups. They are, among others:
- ACR Electronics technical drawings
- Y1-03-0203 manuals
- ACR Electronics product data sheets
- information booklets
- or energy labels ACR Electronics Y1-03-0203
All of them are important, but the most important information from the point of view of use of the device are in the user manual ACR Electronics Y1-03-0203.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals ACR Electronics Y1-03-0203, service manual, brief instructions and user manuals ACR Electronics Y1-03-0203. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product ACR Electronics Y1-03-0203.

Similar manuals

A complete manual for the device ACR Electronics Y1-03-0203, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use ACR Electronics Y1-03-0203 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of ACR Electronics Y1-03-0203.

A complete ACR Electronics manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual ACR Electronics Y1-03-0203 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the ACR Electronics Y1-03-0203, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the ACR Electronics Y1-03-0203, that we can find in the current document
3. Tips how to use the basic functions of the device ACR Electronics Y1-03-0203 - which should help us in our first steps of using ACR Electronics Y1-03-0203
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with ACR Electronics Y1-03-0203
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of ACR Electronics Y1-03-0203 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning ACR Electronics Y1-03-0203?

Use the form below

If you did not solve your problem by using a manual ACR Electronics Y1-03-0203, ask a question using the form below. If a user had a similar problem with ACR Electronics Y1-03-0203 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)