Manual Canon DR-6080

16 pages 0.72 mb
Download

Go to site of 16

Summary
  • Canon DR-6080 - page 1

    SC ANNING B ASICS USEFUL FEA TURES TROUBLESHOO TING QUICK REFERENCE DOCUMENT SCANNER ...

  • Canon DR-6080 - page 2

    PRECAUTIONS 1 ● Make sure that your documents are within the acceptable scanning sizes. Width: 2.2 – 12 inches (55 – 305 mm) Length: 2.8 – 17 inches (70 – 432 mm) Documents up to 39.4 inches (1000 mm) can be scanned in the extra long mode. Thickness: 0.06 – 0.15 mm (auto feed), 0.05 – 0.3 mm (manual feed) Weight: 16 – 32 lb. bond (6 ...

  • Canon DR-6080 - page 3

    SCANNING BASICS GETTING ST ARTED This section explains the basic steps involved in scanning a document. It assumes that the batch to be scanned contains papers all of the same size and thickness. When using either the DR-6080 or the DR-9080C, you should always make sure that the scanner has been turned ON before turning on the computer connected to ...

  • Canon DR-6080 - page 4

    3 SCANNING BASICS STEP 2 ▲ 1 ■ Long Documents If the document you are scanning is long, open the document eject tray extension . Next, lift up the stopper and adjust its position to match the length of the document. ■ Short Documents If the document you are scanning is short, use the stopper without opening the document eject tray extension. ...

  • Canon DR-6080 - page 5

    STEP 3 The DR-6080 and the DR-9080C are operated via the bundled ISIS/TWAIN driver, which is compatible with a wide range of application software. Use the ISIS/TWAIN driver to select the feeding option that matches your need. 4 ▲ In addition to selecting the feeding option, use the ISIS/TWAIN driver to make any other scan settings you require. SC ...

  • Canon DR-6080 - page 6

    5 STEP 4 Prepare your documents by aligning the batch so that its edges are even. Then place the batch on the document tray with the documents face up. The top edge of the batch should be placed against the back of the document tray. ▲ STEP 5 Adjust the document guides to the width of the documents. Panel mode: To scan more documents, reload the ...

  • Canon DR-6080 - page 7

    6 SCANNING BASICS 1 STEP 4 Place the first page of the batch face up in the document tray. Adjust the document guides to the width of the page. ▲ STEP 5 Use your application software to instruct scanning to start. To scan more documents, simply reload the document tray. Scanning will continue automatically. To end scanning, press the Stop key. ? ...

  • Canon DR-6080 - page 8

    7 1 STEP 4 Place one page face up on the document tray. Adjust the document guides to the width of the page. STEP 5 Select Manual Feeding in Feeding Option on the ISIS/TWAIN driver’s settings screen. Alternatively, press the Bypass Mode key on the operation panel. The document tray will rise. STEP 6 Use your application software to instruct scann ...

  • Canon DR-6080 - page 9

    COUNT ONL Y MODE In this mode, documents are fed through the scanner and counted, not scanned. To use this mode, press the Count Only key on the operation panel. Then place a batch on the document tray and press the Start key. The number of pages in the batch will appear in the counter display. 8 ▲ PA TCH CODE SHEETS The scanner can recognize she ...

  • Canon DR-6080 - page 10

    9 USER PREFERENCES To promote ease of use, the bundled ISIS/TWAIN driver offers registration of up to 100 sets of customized scan settings. After registration, you can prepare the scanner for a job by simply selecting a desire setting from a pull-down menu. ▲ PRESC AN Prescan allows you to scan the first page of your batch, adjust the brightness ...

  • Canon DR-6080 - page 11

    10 2 SKIP BLANK P A GE Useful for scanning batches that include single- and double-sided documents, this feature automatically removes blank pages from the image file. ▲ AU T OMA TIC P A GE SIZE DETECTION This function automatically detects the size/thickness of documents and adjusts the scanner. It enables you to feed a batch that contains mixed ...

  • Canon DR-6080 - page 12

    11 3 STEP 1 Remove documents from the scanner’s upper and lower trays, and remove any extra parts attached to the upper tray. Close the document eject tray extension if it is open. Paper may have jammed if scanning stops midway or “PXX” appears on the counter display. Follow the procedure below to remove jammed paper from inside the scanner. ...

  • Canon DR-6080 - page 13

    12 3 STEP 1 Remove documents from the scanner’s upper and lower trays, and remove any extra parts attached to the upper tray. Close the document eject tray extension if it is open. If a document is jammed in the scanner’s paper exit section, the upper scanner only needs to be lifted up slightly for you to remove the document. ▲ STEP 2 Press t ...

  • Canon DR-6080 - page 14

    13 3 ERROR CODES TROUBLESHOOTING Error codes appear on the operation panel’s counter display when a scanner malfunction occurs. Error Code Cause and Solution The document does not feed correctly. Press the Stop key to reset the counter. Place the document back on the document tray and scan the document again. A01 C01 C04 C06 The upper scanner is ...

  • Canon DR-6080 - page 15

    14 3 A complete list of error codes and solutions to other types of scanner trouble can be found in Chapter 6 of the Instructions manual (“Troubleshooting”). TROUBLESHOOTING Error Code Cause and Solution Double feed detected by document length and ultrasonic. Check the document against the scanned image, and scan the document again. d06 Exx J01 ...

  • Canon DR-6080 - page 16

    CANON Customer Service Centers © CANON ELECTRONICS INC. 2003 PRINTED IN JAPAN PUB.CE-CE-305 0104AB0.2 *CE-CE-305* ...

Manufacturer Canon Category Scanner

Documents that we receive from a manufacturer of a Canon DR-6080 can be divided into several groups. They are, among others:
- Canon technical drawings
- DR-6080 manuals
- Canon product data sheets
- information booklets
- or energy labels Canon DR-6080
All of them are important, but the most important information from the point of view of use of the device are in the user manual Canon DR-6080.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Canon DR-6080, service manual, brief instructions and user manuals Canon DR-6080. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Canon DR-6080.

A complete manual for the device Canon DR-6080, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Canon DR-6080 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Canon DR-6080.

A complete Canon manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Canon DR-6080 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Canon DR-6080, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Canon DR-6080, that we can find in the current document
3. Tips how to use the basic functions of the device Canon DR-6080 - which should help us in our first steps of using Canon DR-6080
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Canon DR-6080
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Canon DR-6080 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Canon DR-6080?

Use the form below

If you did not solve your problem by using a manual Canon DR-6080, ask a question using the form below. If a user had a similar problem with Canon DR-6080 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)