English dropdown-ico

Manual Barco 9200

53 pages 2.95 mb
Download

Go to site of 53

Summary
  • Barco 9200 - page 1

    OWNER'S MANUAL R9001320 GRAPHICS 9200 ...

  • Barco 9200 - page 2

    ...

  • Barco 9200 - page 3

    BARCO PROJECTION SYSTEMS Date : 030798 OWNER'S MANUAL Rev : 01 R9001320 GRAPHICS 9200 Art. No. : R5975947 ...

  • Barco 9200 - page 4

    Due to constant research, the information in this manual is subject to change without notice. Produced by BARCO NV, July 1998. All rights reserved. Trademarks are the rights of their respective owners. BARCO n.v./Projection Systems Noordlaan 5 B-8520 Kuurne Belgium Tel : +32/56/368211 Fax : +32/56/351651 E-mail : sales.bps@barco.com Visite Barco at ...

  • Barco 9200 - page 5

    Table of Contents i-1 5975947 BARCOGRAPHICS 9200 120297 TABLE OF CONTENTS i TABLE OF CONTENTS .............................................................................................................. ................................................................ i- 1 SAFETY INSTRUCTIONS ....................................................... ...

  • Barco 9200 - page 6

    Table of Contents i-2 5975947 BARCOGRAPHICS 9200 120297 Geometry ....................................................................................................................................................................................... 9 - 8 Shift ......................................................................................... ...

  • Barco 9200 - page 7

    1-1 Unpacking and Dimensions 5975288 BARCOGRAPHICS 8200 030798 1 Pull To op en L UNP ACKING AND DIMENSIONS Unpacking To open the banding, pull on the clip as shown in the first drawing. Take the projector out of its shipping carton and place it on a table. For transportation, the projector is mounted on a wooden board with 3 bolts. Use a 13 mm wren ...

  • Barco 9200 - page 8

    1-2 Unpacking and Dimensions 5975288 BARCOGRAPHICS 8200 030798 310a.D RW Battery installation in the RCU. A battery (not yet installed to save the battery life time) is delivered inside the plastic bag with the power cord. To install the battery, remove the battery cover on the backside of the remote control by pushing the indicated handle a little ...

  • Barco 9200 - page 9

    2-1 Installation Guidelines 5975967 BARCOGRAPHICS 9200 120297 2 INST ALLA TION GUIDELINES Installation guidelines Careful consideration of things as image size, ambient light level, projector placement and type of screen to use are critical to the optimum use of the projection system. * Environment Do not install the projection system in a site nea ...

  • Barco 9200 - page 10

    2-2 Installation Guidelines 5975967 BARCOGRAPHICS 9200 120297 B = Distance between ceiling and top of the screen or between floor and bottom of the screen. A = Correction value, distance between bottom side of projector (without feed) and middle of the lens. Value to be subtracted from B to obtain the correct installation position. (A value is a co ...

  • Barco 9200 - page 11

    3-1 Location and Functions of Control 5975967 BARCOGRAPHICS 9200 030798 3 RS 232 IN REMOT E PROJECTOR M ODE : GREEN - OP ERATIO N RED - ST ANDBY COMMUNI CAT I O N PORT (8 00- PE RI PHERAL S) RS232 OUT IR- A CK NO WLE DG ED IR-RECEIVED DI AG NOS T IC S CODE IR-R ECEIVER 0 I This devi ce complies wi th Par t 15 of the FCC rul es. Operat ion is subj e ...

  • Barco 9200 - page 12

    3-2 Location and Functions of Control 5975967 BARCOGRAPHICS 9200 030798 - + - + - + - + - + 0 9 7 8 6 5 4 3 2 1 32a - + ? COLOR PHASE SHARPN TINT BRIGHTN STANDBY ENTER TEXT EXI T PAUSE b. Remote control This remote control includes a battery powered infrared (IR) trans- mitter that allows the user to control the projector remotely. This remote cont ...

  • Barco 9200 - page 13

    Installation Set Up 4-1 5975967 BARCOGRAPHICS 9200 221297 4 INST ALLA TION SET UP The projector can be installed to project images in four different configurations : front/table, front/ceiling, rear/table and rear/ceiling. To change the Configuration, enter the adjustment mode by pushing ADJUST or ENTER . Highlight Installation by pushing the contr ...

  • Barco 9200 - page 14

    Installation Set Up 4-2 5975967 BARCOGRAPHICS 9200 221297 ...

  • Barco 9200 - page 15

    Connections 5-1 5975967 BARCOGRAPHICS 9200 221297 5 R G BV RGB H / C V On 98 27910 RGB H / C V H RS 232 I N REMO TE PROJ ECTOR MODE : GREE N - OPERA TI ON RED - STANDBY COMMU NIC AT ION P ORT (800- PERIPHERALS) RS 232 OUT IR- AC KNO WL EDGE D IR-RECEIVED DIA GNO S TIC S CODE IR -RECEIV ER 0 I This dev ice c omplies wi th Part 15 of the FCC rules. O ...

  • Barco 9200 - page 16

    Connections 5-2 5975967 BARCOGRAPHICS 9200 221297 0 I WARNING Lamp run time is 1000 hours Operating the lamp longer than 1000 hours may damage the projector. Please replace the lamp <ENTER> to confirm² Lamp run time 980 hours Lamp Run Time When the total run time of the lamp is 970 hours or more, the following message will be displayed for 1 ...

  • Barco 9200 - page 17

    Connections 5-3 5975967 BARCOGRAPHICS 9200 221297 S- VI DEO 98 27900 VI DEO LR AUDI O On On Video input Audio input not available S-Video input Floati ng Non-Floating TV t une r , e. g. TVD M 40 st ereo VCR A u d io a m p lifier C om posit e Vi deo VCR S -VHS Lum a/C hrom a RGB V R G B H / C V On 98 27910 RGB H / C V H RS 232 IN REMOT E PR OJEC TOR ...

  • Barco 9200 - page 18

    Connections 5-4 5975967 BARCOGRAPHICS 9200 221297 R G B H / C V On 98 27910 Vert. sync Hor. sync or Composite sync Blue Green Red Float i ng Non-Fl oati ng R G BV RGB H / C V On 98 27 91 0 RGB H / C V H RS 232 I N REMOT E PRO JEC T O R M O DE : GR EE N - OP ER ATION RED - STAN DBY COMMU NI CATI O N POR T (800-PERIPHERA LS) RS23 2 OUT IR- AC KNOWL E ...

  • Barco 9200 - page 19

    Connections 5-5 5975967 BARCOGRAPHICS 9200 221297 R- Y Y B- Y S On 98 27 930 Sync Blue - luma Luma Red - luma Select with or then <ENTER> <EXIT> to return. Select with or then <ENTER> <EXIT> to return. HDT V V CR RGB V RGB H / C V On 98 2 7910 RGB H / C V H RS 2 32 I N REMOTE PROJE CTOR MODE : GRE EN - OP ER AT I ON RED - S ...

  • Barco 9200 - page 20

    Connections 5-6 5975967 BARCOGRAPHICS 9200 221297 Straps on module level : Floating or non-floating input. R-Y : J3 : strap "yes" : non floating strap "no" : floating Y : J4 : strap "yes" : non floating strap "no" : floating B-Y : J5 : strap "yes" : non floating strap "no" : floating S : J ...

  • Barco 9200 - page 21

    Connections 5-7 5975967 BARCOGRAPHICS 9200 221297 Straps on module level : Floating or non-floating input. Red : J3 : strap "yes" : non floating strap "no" : floating Green : J4 : strap "yes" : non floating strap "no" : floating Blue : J5 : strap "yes" : non floating strap "no" : floating ...

  • Barco 9200 - page 22

    Connections 5-8 5975967 BARCOGRAPHICS 9200 221297 Connecting a RCVDS 05 to the projector. - Up to 10 inputs (20 when video inputs) with the RCVDS 05 and 90 inputs when RCVDS's are linked via the expansion module. - Serial communication with the projector. - Remote control buttons on the RCVDS to control the projector (source selection and anal ...

  • Barco 9200 - page 23

    6-1 Controlling 5975967 BARCOGRAPHICS 9200 221297 6 RGB V RGB H / C V On 98 2791 0 R G B H / C V H RS 232 IN REMO TE PROJECTO R MODE : GR EEN - OP ERAT I ON RED - STANDB Y C OMMUNICATION PORT (80 0 -PERIPHERAL S) RS232 OU T IR- ACKNO WLEDG ED IR -R ECEI VE D DIA GNO STI CS COD E IR-RECEIVER 0 I This device complies with Pa rt 15 of the FCC rules. O ...

  • Barco 9200 - page 24

    6-2 Controlling 5975967 BARCOGRAPHICS 9200 221297 0 127 How to Display a Projector Address? Press the ADDRESS key (recessed key on the RCU) with a pencil. The projector's address will be displayed in a 'Text box'. This text box disappears after a few seconds. To continue using the RCU, it is necessary to enter the same address with t ...

  • Barco 9200 - page 25

    7-1 Start up of the Adjustment Mode 5975967 BARCOGRAPHICS 9200 221297 7 Adjustment Mode All source parameters, picture tuning and geometry are made while in the 'Adjustment Mode' . Press the ADJUST or ENTER key to enter the 'Adjustment mode'. You are now in the 'Adjustment Mode'. The control disc (RCU) or '+ or &a ...

  • Barco 9200 - page 26

    7-2 Start up of the Adjustment Mode 5975967 BARCOGRAPHICS 9200 221297 ...

  • Barco 9200 - page 27

    8-1 Random Access Adjustment Mode 5975967 BARCOGRAPHICS 9200 070398 8 RANDOM ACCESS ADJUSTMENT MODE ADJUSTMENT MODE Select a path from below : RANDOM ACCESS INSTALLATION SERVICE Source 01 Select with or then <ENTER> <EXIT> to return. Starting up the Random Access Adjustment Mode Push the control disc up or down to highlight 'Random ...

  • Barco 9200 - page 28

    8-2 Random Access Adjustment Mode 5975967 BARCOGRAPHICS 9200 030798 Select with or then <ENTER> <EXIT> to return. Select with or then <ENTER> <EXIT> to return. Select with or then <ENTER> <EXIT> to return. Highlight File Service by pushing the control disc up or down and press ENTER to select. The File service me ...

  • Barco 9200 - page 29

    8-3 Random Access Adjustment Mode 5975967 BARCOGRAPHICS 9200 070398 The file name will be displayed in the upper right corner. The following items can be adjusted : Total quantity horizontal pixels Active quantity horizontal pixels Horizontal start in pixels Horizontal period in µs (is automatically adapted during the instal- lation of a file with ...

  • Barco 9200 - page 30

    8-4 Random Access Adjustment Mode 5975967 BARCOGRAPHICS 9200 030798 Select with or <ENTER> to toggle or to change value <EXIT> to return EDIT FILE OPTIONS Source number 1 Clamp position [leading] Clamp width [1] Field polarity inverted [no] Vertical refresh [sync] Vert. sync polarity [leading] Sync pul se Clam p pul se Cla mp wid th tra ...

  • Barco 9200 - page 31

    8-5 Random Access Adjustment Mode 5975967 BARCOGRAPHICS 9200 070398 Select with or then <ENTER> <EXIT> to return. Select with or then <ENTER> <EXIT> to return. Rename To change the name of a selected file. Use the control disc to select RENAME and press ENTER . The Rename selection menu will be displayed. Use the control dis ...

  • Barco 9200 - page 32

    8-6 Random Access Adjustment Mode 5975967 BARCOGRAPHICS 9200 030798 Select with or then <ENTER> <EXIT> to return. Select with or then <ENTER> <EXIT> to return. Select with or then <ENTER> <EXIT> to return. Delete To delete a selected file out of the list of files. Use the control disc to select DELETE and press E ...

  • Barco 9200 - page 33

    8-7 Random Access Adjustment Mode 5975967 BARCOGRAPHICS 9200 070398 Sync slow/fast Highlight sync by pushing the control disc up or down and press ENTER to toggle between SLOW and FAST. Still Video This function is only used for stationary interlaced images. Highlight Still Video by pushing the control disc up or down and press ENTER to toggle betw ...

  • Barco 9200 - page 34

    8-8 Random Access Adjustment Mode 5975967 BARCOGRAPHICS 9200 030798 Select with or then <ENTER> <EXIT> to return. 3 GAMMA = 2.2 Geometry Highlight Geometry by pushing the control disc up or down and press ENTER to select the geometry selection menu. The following adjustment are possible :  horizontal and vertical image shift.  hor ...

  • Barco 9200 - page 35

    8-9 Random Access Adjustment Mode 5975967 BARCOGRAPHICS 9200 070398 Select with or then <ENTER> <EXIT> to return. Bottom bl anki ng Top bl anki ng Rig ht blank ing Left blank ing GEOMETRY SHIFT SIZE SIDE KEYSTONE BLANKING OPTIONS Select with or then <ENTER> <EXIT> to return. Side Keystone Highlight Side Keystone by pushing t ...

  • Barco 9200 - page 36

    8-10 Random Access Adjustment Mode 5975967 BARCOGRAPHICS 9200 030798 Adjustment of the blanking on the top of the image Adjustment of the blanking on the bottom of the image Correct by pushing the control disc up or down Adjustment of the blanking on the left side Adjustment of the blanking on the right side Correct by pushing the control disc to t ...

  • Barco 9200 - page 37

    9-1 Installation Mode 5975957 BARCOGRAPHICS 9200 221297 9 Select with or then <ENTER> <EXIT> to return. Select with or then <ENTER> <EXIT> to return. INST ALLA TION MODE Starting up the Installation Mode Push the control disc up or down to highlight Installation and then press ENTER . ENTER continues to the Installation mode ...

  • Barco 9200 - page 38

    9-2 Installation Mode 5975967 BARCOGRAPHICS 9200 221297 Select with or then <ENTER> <EXIT> to return. Select with or then <ENTER> <EXIT> to return. Select with or then <ENTER> <EXIT> to return. Convergence Highlight "Convergence" by pushing the control disc up or down and press ENTER to display the conv ...

  • Barco 9200 - page 39

    9-3 Installation Mode 5975957 BARCOGRAPHICS 9200 221297 The three alignments influence each other, therefore repeat if neces- sary the above three steps (b,c and d). When the green pattern is correctly focused, press EXIT to return to the Convergence menu. Red on green convergence. Use the control disc to hightlight Red on green and press ENTER to ...

  • Barco 9200 - page 40

    9-4 Installation Mode 5975967 BARCOGRAPHICS 9200 221297 Select with or then <ENTER> <EXIT> to return. Configuration Highlight "Configuration" by pushing the control disc up or down and press ENTER to select. For more information, see Projector configuration in chapter 4 : 'Installation Set Up'. INSTALLATION INPUT SLO ...

  • Barco 9200 - page 41

    Service Mode 11-1 5975947 BARCOGRAPHICS 9200 120297 SERVICE MODE 10 Starting up the Service Mode Push the control stick forward or backward to highlight Service and then press ENTER . Some items in the Service mode are password protected (when the password function is active). Enter your password to continue. All other password protected items are ...

  • Barco 9200 - page 42

    Service Mode 11-2 5975947 BARCOGRAPHICS 9200 120297 SERVICE IDENTIFICATION CHANGE PASSWORD CHANGE LANGUAGE CHANGE PROJ. ADDRESS CHANGE BAUDRATE PC RESET LAMP RUNTIME LAMP RUNTINE HISTORY LAMP POWER : 1500W MORE... Select with or then <ENTER> <EXIT> to return. SERVICE PANEL ADJUSTMENTS PRESET INPUT BALANCE 60Hz TRACKING I2C DIAGNOSIS MOR ...

  • Barco 9200 - page 43

    Service Mode 11-3 5975947 BARCOGRAPHICS 9200 120297 Change Password This item is password protected when the password strap is installed. How to enable or disable the password function ? The password function is enabled when the password strap on the controller module is installed. To get acces to the controller module, handle as follows : - Power ...

  • Barco 9200 - page 44

    Service Mode 11-4 5975947 BARCOGRAPHICS 9200 120297 How to change the password ? Highlight Change password by pushing the control stick forward or backward and press ENTER to display the Change Password menu. Select with or then <ENTER> <EXIT> to return. SERVICE IDENTIFICATION CHANGE PASSWORD CHANGE LANGUAGE CHANGE PROJ. ADDRESS CHANGE ...

  • Barco 9200 - page 45

    Service Mode 11-5 5975947 BARCOGRAPHICS 9200 120297 The following baud rates are available : - 9600 - 4800 - 2400 - 1200 - 600 - 300 - 150 - 75 The actual baud rate will be highlighted. To change the baud rate, push the control stick forward or backward and press ENTER to accept the new baud rate setting. Reset Lamp Runtime Reset lamp run time is o ...

  • Barco 9200 - page 46

    Service Mode 11-6 5975947 BARCOGRAPHICS 9200 120297 Select with or then <ENTER> <EXIT> to return. SERVICE PANEL ADJUSTMENTS PRESET INPUT BALANCE 60Hz TRACKING I2C DIAGNOSIS MORE... Panel Adjustments Changing these settings may seriously affect the perform- ance of the projector. All panel adjustments are factory adjusted. If not really ...

  • Barco 9200 - page 47

    Appendix A : Standard Source Set Up Files A-1 5975947 BARCOGRAPHICS 9200 120297 A ST ANDARD SOURCE SET UP FILES Name : name of file, contains the settings Resolution : image resolution, when fol- lowed by ...I means interlaced. FVERT Hz : vertical frequency of the source FHOR kHz : horizontal frequency of the source. FPIX MHz : pixel frequency PTOT ...

  • Barco 9200 - page 48

    Appendix A : Standard Source Set Up Files A-2 5975947 BARCOGRAPHICS 9200 120297 NAME RESOLUTION FVERT FHOR FPIX PTOT PACT LTOT LACT Hz kHz MH z XGA_72 1024 X 768 71,955 58,140 80,000 1376 1024 808 768 SUP_MAC 1024 X 768 60,000 48,780 63,999 1312 1024 813 768 XGA_70 1024 X 768 70,000 57,050 78,044 1368 1024 815 768 MAC_POR 640 X 870 74,996 68,846 57 ...

  • Barco 9200 - page 49

    B-1 Lenses 5975967 BARCOGRAPHICS 9200 221297 B LENSES Focusing the lens Loosen the fastener ring of the lens by turning counter clockwise. Focus the image by turning the lens barrel to the left or the right. Attention : Do not turn out the lens too far, otherwise it will fall out of the lens holder. When the image is focused, secure the correct pos ...

  • Barco 9200 - page 50

    B-2 Lenses 5975967 BARCOGRAPHICS 9200 221297 e m a N s n e l h t g n e L ) h c n i ( m m s n e l . m a i d ) h c n i ( m m t h g i e w ) s b l ( g k r e b m u n r e d r o ) 1 : 2 . 1 ( D H) 6 9 . 9 ( 3 5 2) 4 4 . 7 ( 9 8 1) 2 . 9 1 ( 7 . 80 0 2 9 2 8 9 R ) 1 : 2 . 2 ( D H) 5 2 . 9 ( 5 3 2) 9 3 . 5 ( 7 3 1) 5 . 6 1 ( 5 . 70 6 0 9 2 8 9 R ) 1 : 3 . 3 ...

  • Barco 9200 - page 51

    C-1 Source Numbers 90 - 99 5975947 BARCOGRAPHICS 9200 030798 C SOURCE NUMBERS 80 - 89 AND 90 - 99 Projector without any 800 peripheral connected. The source numbers 80 - 89 and 90 - 99 do not correspond to physical inputs. An additional adjustment file can be created for these source numbers. This file can contain different settings. The relationsh ...

  • Barco 9200 - page 52

    C-2 Source Numbers 90 - 99 5975947 BARCOGRAPHICS 9200 030798 Source numbers 81 - 84 Only valid if no input module is connected to slot 81 - 84 of a RCVDS05. The source numbers 81 - 84 correspond to the physical inputs 1 - 4 of the projector. e.g. When slot 1 of the projector has to be selected, key in source number 81. The relationship between the ...

  • Barco 9200 - page 53

    5975967 BARCOGRAPHICS 9200 221297 3 ...

Manufacturer Barco Category Projector

Documents that we receive from a manufacturer of a Barco 9200 can be divided into several groups. They are, among others:
- Barco technical drawings
- 9200 manuals
- Barco product data sheets
- information booklets
- or energy labels Barco 9200
All of them are important, but the most important information from the point of view of use of the device are in the user manual Barco 9200.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Barco 9200, service manual, brief instructions and user manuals Barco 9200. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Barco 9200.

Similar manuals

A complete manual for the device Barco 9200, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Barco 9200 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Barco 9200.

A complete Barco manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Barco 9200 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Barco 9200, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Barco 9200, that we can find in the current document
3. Tips how to use the basic functions of the device Barco 9200 - which should help us in our first steps of using Barco 9200
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Barco 9200
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Barco 9200 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Barco 9200?

Use the form below

If you did not solve your problem by using a manual Barco 9200, ask a question using the form below. If a user had a similar problem with Barco 9200 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)