Manual JVC 1004KGI-II-IM

72 pages 1.82 mb
Download

Go to site of 72

Summary
  • JVC 1004KGI-II-IM - page 1

    Important Note: In the spaces below , enter the model and serial number of your television (located at the rear of the television cabinet). Staple your sales receipt or invoice to the inside cover of this guide. Keep this user ’s guide in a convenient place for future reference. Keep the carton and original packaging for future use. LCT1606-001B- ...

  • JVC 1004KGI-II-IM - page 2

    2 Important Safety Precautions W ARNING: TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS TV SET TO RAIN OR MOISTURE. CAUTION: T O INSURE PERSONAL SAFETY , OBSERVE THE FOLLOWING RULES REGARDING THE USE OF THIS UNIT . 1. Operate only from the power source specified on the unit. 2. A void damaging the AC plug and power cord. 3. Avoid Improper ins ...

  • JVC 1004KGI-II-IM - page 3

    3 CAUTION: Please read and retain for your safety . Electrical energy can perform many useful functions. This TV set has been engineered and manufactured to assure your personal safety . But improper use can result in potential electrical shock or fire hazards . In order not to defeat the safeguards incorporated in this TV set, observe the followin ...

  • JVC 1004KGI-II-IM - page 4

    4 7 An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. ...

  • JVC 1004KGI-II-IM - page 5

    5 13 For added protection of the TV set during a lightning storm or when the TV set is to be left unattended for an extended period of time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage to product due to lightning storms or power line surges. 14 A TV set and cart combination should be moved with care. Quick st ...

  • JVC 1004KGI-II-IM - page 6

    6 W arnings Displaying fi xed images on your screen for extended periods of time can leave a subtle but permanent ghost image in your screen. This is referred to as "burn-in". T o avoid this, mix your viewing patterns and aspect modes from time to time. Examples include, but are not limited to the following: • Stock-market report bars ...

  • JVC 1004KGI-II-IM - page 7

    7 T able of Contents Unpacking your TV . . . . . . . . . . . . 8 TV Models . . . . . . . . . . . . . . . . 9 TV Remote Control . . . . . . . . . . . 1 1 Getting Started . . . . . . . . . . . . . 12 The Remote Control . . . . . . . . . . 12 Connecting Y our Devices . . . . . . . 13 Interactive Plug In Menu . . . . . . . . 22 Setting CA TV , VCR and ...

  • JVC 1004KGI-II-IM - page 8

    8 T wo AA Batteries 1 T elevision 1 Remote Control Used to connect an external antenna or cable TV system to your TV . Used to make video connections with S-Video VCRs, Camcorders and DVD players. We recommend that before you start using your new television, you read your entire User’s Guide so you can learn about your new television’s many gre ...

  • JVC 1004KGI-II-IM - page 9

    9 AUDIO (ANALOG) R L VIDEO (DIGITAL) AUDIO (DIGITAL) DIGITAL IN UNPLUG THE POWER CORD FROM AC OUTLET BEFORE REMOVING THE REAR COVER When the rear cover is removed, follow "CAUTION A T DISASSEMBLY" procedure in the service manual before plugging the TV's power cord into an AC outlet. Failure to follow the procedure will result in PERM ...

  • JVC 1004KGI-II-IM - page 10

    10 Quick Setup TV Models MODELS: A V -65WP55, A V -56WP55, A V-48WP55 Front Panel Diagram MENU CHANNEL OPERATE VOLUME PULL OPEN POWER I'Art PRO S-VIDEO OVER VIDEO L / MONO AUDIO R INPUT4 LCT1606 English C 10 10/25/04, 12:13:47 PM ...

  • JVC 1004KGI-II-IM - page 11

    11 POWER DISPLAY SLEEP TIMER LIGHT FREEZE THEATER PRO VIDEO STATUS 1 7 4 TUNE 3 9 6 RETURN+ MUTING MENU OK BACK 2 8 0 5 CH + VOL – VOL + REC OPEN/CLOSE STILL/PAUSE STOP PAUSE PLAY FF REW TV CATV VCR DVD VCR CHANNEL PREV NEXT TV/VCR VCR/ DVD POWER SOUND CH – TV RM-C1257G ASPECT INDEX SWAP SELECT MULTI SCREEN INPUT C.C. TWIN MODELS: A V -65WP55 A ...

  • JVC 1004KGI-II-IM - page 12

    12 These quick setup pages will provide you, in three easy steps, with the basic information you need to begin using your new television right away . If you have questions, or for more detailed information on any of these steps, please consult other sections of this manual. Before you can operate your remote control, you first need to install the b ...

  • JVC 1004KGI-II-IM - page 13

    13 Quick Setup Connections Please follow the flow chart below to determine which connection setup is right for you. Then, refer to the appropriate diagrams to connect your television to other devices that you may have. After you are finished connecting your devices, plug the power cord into the nearest power outlet and turn on the TV . Step 2 – C ...

  • JVC 1004KGI-II-IM - page 14

    14 Quick Setup Connections Notes: • Use the S-Video connection if possible for superior picture quality . • Y our VCR must be turned on to view premium cable channels. S-VIDEO OVER INPUT-1 INPUT-2 OVER INPUT-3 RL AUDIO VIDEO CENTER CHANNEL INPUT 75Ω (VHF/UHF) AV COMPULINK III AUDIO OUT R L TV Rear Panel 75Ω (VHF/UHF) Coaxial Cable Cable or ...

  • JVC 1004KGI-II-IM - page 15

    15 Quick Setup Connections Notes: • Green, blue and red are the most common colors for DVD cables. Some models may vary colors. Please consult the user ’s manual for your DVD player for more information. • Be careful not to confuse the red DVD cable with the red audio cable. It is best to complete one set of connections (DVD or audio output) ...

  • JVC 1004KGI-II-IM - page 16

    16 JVC’s A V CompuLink feature makes playing video tapes or DVDs totally automatic. Simply insert a pre-recorded tape into your JVC brand VCR or DVD into your JVC DVD player and the device will automatically turn on and begin playback. At the same time, using the A V CompuLink, the VCR or DVD player sends a signal to the television telling it to ...

  • JVC 1004KGI-II-IM - page 17

    17 Quick Setup Connections 1) Connect a yellow composite cable from the camcorder VIDEO OUT , into the VIDEO IN on the front of the TV , OR connect an S-Video cable from the front of the TV to the camcorder . 2) Connect a white cable from the camcorder LEFT AUDIO OUT , into the LEFT AUDIO IN on the front of the TV . 3) Connect a red cable from the ...

  • JVC 1004KGI-II-IM - page 18

    18 Quick Setup Connections Connecting to the Surround Amplifier Front CENTER CHANNEL OUTPUT (V ARIABLE OUTPUT) TV Rear Panel Front Surround CENTER CHANNEL INPUT 75Ω (VHF/UHF) A V COMPULINK III AUDIO OUT R L 1) Connect the Pin cable from the TV's CENTER CHANNEL INPUT terminal to the surround amplifier's CENTER CHANNEL OUTPUT terminal. No ...

  • JVC 1004KGI-II-IM - page 19

    19 Quick Setup Connections By connecting a Digital TV Reciever , high definition pictures can be displayed on your TV in their digital form. AUDIO (ANALOG) R L VIDEO (DIGIT AL) AUDIO (DIGIT AL) DIGIT AL IN TV Rear Panel DTV Decoder LR AUDIO OUT DIGIT AL OUT HDMI to DVI Cable After the connections have been made, tighten the screw to secure the cabl ...

  • JVC 1004KGI-II-IM - page 20

    20 By connecting a HDMI compatible device, high definition pictures can be displayed on your TV in their digital form. Some HDMI devices can include DVD players, D-VHS or any HDMI compatible device. HDMI (High Definition Multimedia Interface) is the first industry supported, uncompressed, all digital audio/video interface. HDMI provides and interfa ...

  • JVC 1004KGI-II-IM - page 21

    21 Quick Setup Connections By connecting your A V Receiver to your television's V1 Smart Input, you can watch picture sources from many different devices, without having to change or use the other input connections on your TV . This allows you to free up the other input connections so you can connect more devices to your television. Connecting ...

  • JVC 1004KGI-II-IM - page 22

    22 When you turn your television on for the first time the interactive plug-in menu will appear . The plug-in menu helps you to get your TV ready to use by letting you set your preferences for: • The language in which you want the onscreen menus to appear . • Setting the TV’s clock to the correct time so your timer functions will work properl ...

  • JVC 1004KGI-II-IM - page 23

    23 T o set your clock manually (without using the XDS signal), choose MANUAL. If you choose AUTO, see auto clock set above. √ ® T o choose MANUAL † T o TIME √ ® T o set the hour † T o minute √ ® T o set the minute † T o Start Clock Manual Clock Set Note: • Y ou will have to reset the clock after a power interruption. Y ou must set ...

  • JVC 1004KGI-II-IM - page 24

    24 Quick Setup Plug-In Menu In auto tuner setup, the TV automatically scans through all available channels, memorizing the active ones and skipping over blank ones or channels with weak signals. This means when you scan (using the C HANNEL +/– buttons) you will receive only clear , active channels. √ ® T o choose CABLE or AIR (or SKIP when you ...

  • JVC 1004KGI-II-IM - page 25

    25 Y ou can program your remote to operate your cable box, satellite receiver , VCR or DVD player by using the instructions and codes listed below . If the equipment does not respond to any of the codes listed below or to the code search function, use the remote control supplied by the manufacturer . The remote control is programmed with cable box ...

  • JVC 1004KGI-II-IM - page 26

    26 The remote control is programmed with VCR codes for power on/off, play , stop, fast-forward, rewind, pause, record, channel up/down operation. 1) Find the VCR brand from the list of codes shown below . 2) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “VCR”. 3) Press and hold down the D ISPLA Y butto ...

  • JVC 1004KGI-II-IM - page 27

    27 The remote control is programmed with DVD codes for power on/off, play , stop, fast-forward, rewind, previous/next chapter , tray open/close, and still/pause operation. 1) Find the DVD player brand from the list of codes shown below . 2) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “DVD”. 3) Press ...

  • JVC 1004KGI-II-IM - page 28

    28 Remote Programming Cable/Satellite Search Codes Function 1) Slide the first 2-W ay Mode Selector switch to CA TV . 2) Press the P OWER and R ETURN + buttons. Hold for at least three seconds and release. 3) Press the P OWER button on the remote, and see if the cable or satellite box responds. 4) If there was a response, press R ETURN +. The codes ...

  • JVC 1004KGI-II-IM - page 29

    29 T o bring up the onscreen menu , press the M ENU button on the remote control. The item that appears in green is the one currently selected. If you use the Menu button on the TV’ s front panel instead of the remote, an additional menu screen showing INPUT , VIDEO ST A TUS and ASPECT will appear between INITIAL SETUP and PICTURE ADJUST . The ? ...

  • JVC 1004KGI-II-IM - page 30

    30 Y our television comes with JVC’s onscreen menu system. The onscreen menus let you make adjustments to your television’s operation simply and quickly . Examples of the onscreen menus are shown on the next page. Detailed explanations on using each menu follow later in this guide. For information about the interactive plug-in Menu, see pages 2 ...

  • JVC 1004KGI-II-IM - page 31

    31 Press the M ENU button Onscreen Menus Notes: • The DIGIT AL-IN menu can only be displayed when a 480p picture signal is input to the digital-in terminal and the picture is being displayed on the screen. • When the Menu button on the TV front panel is pressed, the FRONT P ANEL CONTROL menu between INITIAL SETUP 4/4 and PICTURE ADJUST 1/2 will ...

  • JVC 1004KGI-II-IM - page 32

    32 Initial Setup Auto T uner Setup The auto tuner setup function is described on page 24 as the interactive plug-in menu. If you need to run the auto tuner setup again, follow the steps below . Press the M ENU button π † T o AUTO TUNER SETUP √ ® T o operate √ ® T o choose CABLE or AIR Press the O K button to start Programming will take app ...

  • JVC 1004KGI-II-IM - page 33

    33 How to set the channel label. Press the M ENU button π † T o CHANNEL SUMMARY √ ® T o operate π † T o the ID column Press the O K button to enter √ ® T o select the character you want π † T o move to the next space ...continue to follow these directions for all four spaces Press the O K button to finish Y our characters are now set ...

  • JVC 1004KGI-II-IM - page 34

    34 When a viewer attempts to watch a guarded channel, the following message appears: T o watch a channel that you have locked, enter the Lock Code using the 10 key pad. If the wrong code is entered, the message “INV ALID LOCK CODE!” will flash on the screen. The channel cannot be accessed until the correct code is entered. Notes: • Once a cha ...

  • JVC 1004KGI-II-IM - page 35

    35 Y ou can block programs that are not rated. Press the M ENU button π † T o V -CHIP √ ® T o operate (The lock icon appears) Press Z ERO to access V -Chip setup options π † T o UNRA TED √ ® T o VIEW or BLOCK Press M ENU when done Directions to Block Unrated Programs Initial Setup Unrated Programs Unrated programming refers to any progr ...

  • JVC 1004KGI-II-IM - page 36

    36 U.S. P ARENT AL RA TING SYSTEMS Programs with the following ratings are appropriate for children. ❒ TV Y is Appropriate for All Children Programs are created for very young viewers and should be suitable for all ages, including children ages 2 - 6. ❒ TV Y7 is for Older Children Most parents would find such programs suitable for children 7 an ...

  • JVC 1004KGI-II-IM - page 37

    37 Initial Setup Line up the cursor in the column (TV PG, TV G, etc.) with the content row (V/FV , S, etc.) and press the π † or √ ® to move the cursor to the correct location. Press O K to turn the locking feature on or off. An item is locked if the icon appears instead of a “—”. For example. T o block viewing of all TV 14 shows, move ...

  • JVC 1004KGI-II-IM - page 38

    38 Initial Setup ❒ NR – Not Rated This is a film which has no rating. In many cases these films were imported from countries which do not use the MP AA ratings system. Other NR films may be from amateur producers who didn’t intend to have their film widely released. NR (Not Rated) Programming may contain all types of programming including chi ...

  • JVC 1004KGI-II-IM - page 39

    39 Press the M ENU button π † T o V -CHIP √ ® T o operate (lock icon appears) Press Z ERO to access V -Chip setup options π † T o SET CANADIAN RA TINGS ENG (for English) √ ® T o enter ratings menu For example: T o block viewing of programming rated 14+ and 18+: √ ® T o the 18+ Column Press the O K button to lock √ ® T o the 14+ Co ...

  • JVC 1004KGI-II-IM - page 40

    40 Channel guard and V -Chip settings are protected by a four-digit lock code. Y our TV comes preset with a lock code of “0000”. Y ou may change the code to any four-digit number you wish. T o change the lock code, follow the steps below . Press the M ENU button π † T o SET LOCK CODE √ ® T o operate (lock icon appears) Press Z ERO to acce ...

  • JVC 1004KGI-II-IM - page 41

    41 Initial Setup This TV has three color projection tubes: one for red, green, and blue. When mixed together in the proper portions, the output of these three color tubes can produce any color . T o produce these colors, however , the beams must be precisely aligned over each other so that the colors can be mixed. The produce of aligning these pict ...

  • JVC 1004KGI-II-IM - page 42

    42 Press the M ENU button π † T o CONVERGENCE √ ® T o Enter π † T o choose MANUAL √ ® T o Enter If all the lines are white, no convergence adjustment is necessary . If not, you need to perform the manual color convergence below . Select the location you want to adjust by using the number buttons on the remote control. Y ou can select an ...

  • JVC 1004KGI-II-IM - page 43

    43 This function lets you preview the many different viewing modes of your TV . It will cycle through “Multi Screen Demo”, “Picture in Picture Demo”, all of the different “Aspect” ratios and all of the different “V ideo Status” modes. Press the M ENU button π † T o AUTO DEMO √ ® T o turn AUTO DEMO ON or OFF Note: • T o stop ...

  • JVC 1004KGI-II-IM - page 44

    44 Initial Setup Many broadcasts now include an onscreen display of dialog called closed captions. Some broadcasts may also include displays of additional information in text form. Y our television can access and display this information using the closed caption feature. T o activate the closed caption feature, follow the steps below . Press the M ...

  • JVC 1004KGI-II-IM - page 45

    45 XDS ID Display provides a channel’s call letters, the network’s name, and even a program name. The XDS ID information is provided by the broadcaster . Press the M ENU button π † T o XDS ID √ ® T o turn ON or OFF Press the M ENU button when finished XDS ID INITIAL SETUP SELECT OPERATE EXIT MENU NEXT PAGE PREVIOUS ENG. FRAN. ESP. LANGUAG ...

  • JVC 1004KGI-II-IM - page 46

    46 This feature is used if you have connected an A V Receiver to your television. By turning this feature on, your television can automatically detect the signal source from your components that are connected to your A V Receiver . Press the M ENU button π † T o V1 SMART INPUT √ ® T o turn ON or OFF Press the MENU button when finished Notes: ...

  • JVC 1004KGI-II-IM - page 47

    47 Initial Setup Position adjustment allows you to adjust the position of the picture on the screen vertically when the aspect is set to panorama, cinema, or full. Press the M ENU button π † T o POSITION ADJUSTMENT √ ® T o enter π † √ ® T o adjust the position Press the M ENU button to finish Notes: • T o reset the adjustment to the c ...

  • JVC 1004KGI-II-IM - page 48

    48 Initial Setup The DIGIT AL-IN option can only be displayed in the INITIAL SETUP menu when a HDMI480p picture signal is being input to the DIGIT AL-IN terminal. This option adjusts the position when a HDMI or DVI 480p picture signal is being displayed on the screen. There are two types of HDMI480p picture signals: 640x480 and 720x480. If the disp ...

  • JVC 1004KGI-II-IM - page 49

    49 Initial Setup When you are using a surround system, you can substitute the speaker of this television for the center speaker of you surround system. Set CENTER CH INPUT to ON when you use the speaker as the center speaker of your surround system. The volume differs when the TV is being utilized as the Center Channel Input versus when it is not. ...

  • JVC 1004KGI-II-IM - page 50

    50 Press the M ENU button π † T o TINT , COLOR, PICTURE, BRIGHT or DET AIL √ ® T o enter √ ® T o adjust the setting π † T o move to the next setting Press the M ENU button when finished These settings allow you to change and adjust the way the picture appears on your television. TINT T int allows you to adjust the levels of red and gree ...

  • JVC 1004KGI-II-IM - page 51

    51 V elocity scan modulation circuitry varies the electron beam’s horizontal scanning speed to help accentuate the differences in picture brightness to sharpen the edges of images. Press the M ENU button π † T o VSM √ ® T o enter √ ® T o turn VSM ON or OFF SELECT OPERATE EXIT MENU NEXT PAGE PREVIOUS STANDARD PICTURE ADJUST DIG. NOISE CLE ...

  • JVC 1004KGI-II-IM - page 52

    52 Reset Reset resets all picture adjustments (tint, color , picture, bright, detail, color temperature, dig. noise clear and VSM) at once to the default settings. Press the M ENU button π † T o RESET √ ® T o enter The onscreen menu disappears for a moment, and then the settings are reset to the default setting for all the picture adjustments ...

  • JVC 1004KGI-II-IM - page 53

    53 MTS technology allows several audio signals to be broadcast at once, giving you a choice in what you wish to hear with a TV program. In addition to mono or stereo sound, an MTS broadcast may also include a second audio program (SAP) . Press the M ENU button π † T o MTS √ ® Select the mode (The ON AIR arrow tells you if a broadcast is in st ...

  • JVC 1004KGI-II-IM - page 54

    54 Clock/T imers Set Clock The set clock function is described on page 24 as the interactive plug-in menu. Y ou can choose to set the clock automatically , or manually . If you need to set the clock again, follow the steps below . Press the M ENU button π † T o SET CLOCK √ ® T o operate When you set the clock automatically , choose AUTO by pr ...

  • JVC 1004KGI-II-IM - page 55

    55 The on/off timer lets you program your television to turn itself on or of f. Y ou can use it as an alarm to wake up, to help you remember important programs, or as a decoy when you’re not home. Press the M ENU button π † T o ON/OFF TIMER √ ® T o operate (begins with ON TIME) √ ® T o set the hour (AM/PM) you want the TV to turn on † ...

  • JVC 1004KGI-II-IM - page 56

    56 Y our television has two kinds of screen: TWIN (2 channels) and INDEX (12 channels). Button Functions Multi Screen Function Note: After you press any multiscreen button, if you press the menu button, only the picture adjust screen will appear . This allows you to quickly look at up to 12 channels at a time so that you can decide which one to wat ...

  • JVC 1004KGI-II-IM - page 57

    57 Button Functions Y ou can exchange the channel (or input) displayed in the split screen window for the main screen image by pressing the S WAP button. Freeze Swap With SELECT , you can select the picture (channel) while viewing SPLIT screen. When you press S ELECT button, the channel number on the top will be highlighted. Each press of S ELECT w ...

  • JVC 1004KGI-II-IM - page 58

    58 Button Functions T urns the TV on or off. Press the P OWER button Use the number buttons on the remote control to move directly to a specific channel. For example, to move to channel 12: 0 (Zero) 1 (One) 2 (T wo) Power Number Buttons - 10Key Pad T une Selects the signal input source for the television: Input-1, 2, 3, 4 or DIGIT AL-IN for video d ...

  • JVC 1004KGI-II-IM - page 59

    59 The R ETURN + button has two functions: Return - Returns to the channel viewed just before the channel currently onscreen. Return+ - Lets you program a specific channel to return to while scanning through the channels using the CH+ and CH– buttons. R ETURN + and hold for three seconds The channel currently active has been programmed as your re ...

  • JVC 1004KGI-II-IM - page 60

    60 The V IDEO S T ATUS button gives you a choice of four TV picture display settings, including a display of your own preferences. Standard - Resets the picture display to the factory settings. Dynamic - Gives a vivid picture with better contrast when viewing in a brightly lit room. Theater - Gives a rich, film-like look to video when viewing in a ...

  • JVC 1004KGI-II-IM - page 61

    61 Button Functions The display screen shows the current status of timers, inputs, and XDS ID. Press the D ISPLA Y button The screen to the right shows the following information: • The current channel or A V input (Channel 05) • The current time (12:20 pm) • Sleep timer status/minutes remaining (The Sleep T imer is off) • On/off timer statu ...

  • JVC 1004KGI-II-IM - page 62

    62 This feature will help you adjust the picture you are watching to give you the best possible picture quality . REGULAR - The regular ratio is used when you want to watch a 4:3 broadcast or recorded program without modifying the original picture to fit the dimensions of your 16:9 screen. The 4:3 picture will fill the screen from top to bottom, wh ...

  • JVC 1004KGI-II-IM - page 63

    63 The M ENU button allows you to access JVC’s onscreen menu system. Press M ENU to activate the onscreen menu system. • See individual topics like “Sound Adjust” for specific information on using menus. Menu Button Functions Back OK This button allows you to go back in the menu to change a selection or correct a mistake. This button confir ...

  • JVC 1004KGI-II-IM - page 64

    64 Use either the television’s own tuner or a cable box to select channels. Set this switch to TV to operate the television’s built-in tuner . Move the switch to CA TV to operate a cable box. Note: • See page 25 for information on programming your remote for cable box operation. Y ou can control a VCR or DVD player with the buttons on the low ...

  • JVC 1004KGI-II-IM - page 65

    65 No Program If the TV channel you selected, or were watching is not receiving a signal, "NO PROGRAM" appears on the television screen. It appears when that channel is not receiving a signal and you have the Noise Muting function OFF and you have a single screen. It moves automatically every two seconds to prevent the screen from burn-in ...

  • JVC 1004KGI-II-IM - page 66

    66 T roubleshooting There is no power There is no picture or sound Y ou cannot select a certain channel The power turns off by itself The clock is wrong The color quality is poor There are lines across the picture The picture is spotted There are double pictures (ghosts) Picture is snowy (image noise) Screen is 40% black Stereo or bilingual program ...

  • JVC 1004KGI-II-IM - page 67

    67 LCT1606 English C 67 10/25/04, 12:14:10 PM ...

  • JVC 1004KGI-II-IM - page 68

    68 LCT1606 English C 68 10/25/04, 12:14:10 PM ...

  • JVC 1004KGI-II-IM - page 69

    69 Rear Projection Television Type Reception Format Reception Range Power Source Power Consumption Model AV-56WP55 NTSC, BTSC System (Multi-Channel Sound) HDTV digital broadcast ready. VHF 2 to 13, UHF 14 to 69 Sub, Mid, Super, Hyper and Ultra bands (180 channel frequency synthesizer system) AC 120V, 60 Hz 248W Screen Size 48 inch / 122 cm measured ...

  • JVC 1004KGI-II-IM - page 70

    70 Notes LCT1606 English C 70 10/25/04, 12:14:11 PM ...

  • JVC 1004KGI-II-IM - page 71

    71 Notes LCT1606 English C 71 10/25/04, 12:14:11 PM ...

  • JVC 1004KGI-II-IM - page 72

    JVC COMP ANY OF AMERICA Division of JVC Americas Corp. 1700 V alley Road W ayne, New Jersey , 07470 JVC CANADA, INC. 21 Finchdene Square Scarborough, Ontario Canada, M1X 1A7 LCT1606 English C 72 10/25/04, 12:14:11 PM ...

Manufacturer JVC Category Projection Television

Documents that we receive from a manufacturer of a JVC 1004KGI-II-IM can be divided into several groups. They are, among others:
- JVC technical drawings
- 1004KGI-II-IM manuals
- JVC product data sheets
- information booklets
- or energy labels JVC 1004KGI-II-IM
All of them are important, but the most important information from the point of view of use of the device are in the user manual JVC 1004KGI-II-IM.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals JVC 1004KGI-II-IM, service manual, brief instructions and user manuals JVC 1004KGI-II-IM. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product JVC 1004KGI-II-IM.

Similar manuals

A complete manual for the device JVC 1004KGI-II-IM, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use JVC 1004KGI-II-IM by users. Manuals are usually written by a technical writer, but in a language understandable to all users of JVC 1004KGI-II-IM.

A complete JVC manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual JVC 1004KGI-II-IM - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the JVC 1004KGI-II-IM, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the JVC 1004KGI-II-IM, that we can find in the current document
3. Tips how to use the basic functions of the device JVC 1004KGI-II-IM - which should help us in our first steps of using JVC 1004KGI-II-IM
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with JVC 1004KGI-II-IM
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of JVC 1004KGI-II-IM in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning JVC 1004KGI-II-IM?

Use the form below

If you did not solve your problem by using a manual JVC 1004KGI-II-IM, ask a question using the form below. If a user had a similar problem with JVC 1004KGI-II-IM it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)