Manual Sanyo PLC-HF10000L

126 pages Not applicable
Download

Go to site of 126

Summary
  • Sanyo PLC-HF10000L - page 1

    Multimedia Pr oject or MODEL PLC-HF1 0 0 0 0L Owner ’ s Manual ✽ Projection lens not included. ...

  • Sanyo PLC-HF10000L - page 2

    2 ✔ Note: •The On-Screen Menu and figures in this manual ma y dif f er slightly from the product. •The contents of this manual are subject to c hange without notice. F eat ur es and Design This Multim edia Projector is design ed wi th mo st ad v anced technology for portabi lity , durabilit y , an d ease of use. This project or utilizes built ...

  • Sanyo PLC-HF10000L - page 3

    3 T rademarks Eac h name of corporations or products in this book is either a registered trademark or a trademark of its respective corporation. T able of Cont ents Feat ur es and Design . . . . . . . . . . . . . . . . 2 T able of Contents . . . . . . . . . . . . . . . . . . 3 T o The Owner . . . . . . . . . . . . . . . . . . . . . 4 Saf ety Instr ...

  • Sanyo PLC-HF10000L - page 4

    4 CA UTION: T O R E D U C E T H E R I S K O F E L E C T R I C S H O C K , D O N OT R E M OV E C OV E R ( O R B A C K ) . N O U S E R - S E R V I C E A B L E P A R T S I N S I D E E XC E P T L A M P R E P L A C E M E N T . REFER SERVICING T O QU ALIFIED SERVICE PERSONNEL. T H I S SY M B O L I N D I C AT E S T H AT DA N G E R O U S VO L TAGE C O N ST ...

  • Sanyo PLC-HF10000L - page 5

    5 A l l t h e s a fe t y a n d o p e r a t i n g i n s t r u c t i o n s s h o u l d b e r e a d before the product is operated. Read all of the ins truction s given here and re ta in them for l a t e r u s e . U n p l u g t h i s p r o j e c t o r f r o m AC p o we r s u p p l y before cleaning. Do not use liquid or aerosol cleaners. Use a damp cl ...

  • Sanyo PLC-HF10000L - page 6

    6 Openings in the cabinet are provided f or ventilation. T o ensure reliable operation of the product and to protect it from ov erheating, these openings must not be bloc ked or cov ered. Air Cir culation Saf ety Instr uctions Saf ety Instr uctions IMPORT ANT! Filter Maint enance!! T op P anel W ARNING FIL TER indicator Fig.1 Filter replacement ico ...

  • Sanyo PLC-HF10000L - page 7

    7 Saf ety Instr uctions Do not radiate strong light suc h as laser light on the projection lens directly , as this may degrade the functionality of the projector . Failure to so suc h will void an y applicable warranties. Cautious use of equipment with laser technology Use the projector properly in specified positions. Improper positioning may redu ...

  • Sanyo PLC-HF10000L - page 8

    8 Mo ving the Pr ojector CA UTION IN CARR YING OR TRANSPORTING THE PROJECT OR – Do not drop or bump the projector , other wise damages or malfunctions may result. – When carr ying the projector , use a suit able carr ying case. – Do not transport the projector by courier or an y other transport ser vice in an unsuit able transport case. This ...

  • Sanyo PLC-HF10000L - page 9

    9 AC P ow er Cord for the Unit ed Kingdom: This cord is already fit ted with a moulded plug incorporating a fuse, the value of whic h is indicated on the pin face of the plug . Should the fuse need to be replaced, an AST A approved BS 1 362 fuse must be used of the same rating , marked thus AS A . If the fuse cover is detac hable, never use the plu ...

  • Sanyo PLC-HF10000L - page 10

    1 0 u e r t F r ont q w y i Bac k P art Names and F unctions A Kensington* Secur ity Slot This slot is f or a Kensington loc k used to deter thef t of the projector . * Kensington is a registered trademark of A CCO Brands Corporation. t CA UTION Hot air is exhausted from the e xhaust vent. Do not put heat-sensitiv e objects near this side. !0 Infra ...

  • Sanyo PLC-HF10000L - page 11

    1 1 P art Names and F unctions T er minals and Connectors r R/C J ACK When using the wired remote control, connect the wired remote control to this jac k with a remote control cable (not supplied). e USB CONNECT OR (series B) USB connector is to used to ser vice the projector . y S-VIDEO J ACK Connects the S-VIDEO output signal from video equipment ...

  • Sanyo PLC-HF10000L - page 12

    12 r FOCUS butt on Adjusts the f ocus. (p.28) e ZOOM butt on Zooms in and out the images. (p.28) q ON/ST AND-B Y butt on T urns the projector on or of f . (pp.24,25) !0 INPUT butt on Selects an input source Input 1, Input 2, Input 3 or Input 4. (pp.3 2 -34) u A UT O PC ADJ . butt on Automatically adjusts the computer image to its optimum set ting . ...

  • Sanyo PLC-HF10000L - page 13

    13 Indicat ors q w e r t y e W ARNING TEMP . indicator This indicator flashes red when internal projector temperature is too high. (pp.78, 85-87) q POWER indicat or This indicator lights green when the projector is ready to be turned on in standby mode. And it flashes green in P ow er Management mode. (pp.62, 85-87) w LAMP Indicator This indicator ...

  • Sanyo PLC-HF10000L - page 14

    Remot e Contr ol P art Names and F unctions !6 LIGHT butt on Lights the but tons on the remote control for about 1 0 seconds. t MENU butt on Opens or closes the On-Screen MENU. (pp.26, 27) y POINT ed 7 8 but tons – Select an item or adjust the value in the ON-SCREEN MENU . (p.26) –P an the image in DIGIT AL ZOOM +/– mode. (p.44) u LENS SHIFT ...

  • Sanyo PLC-HF10000L - page 15

    Remot e Contr ol Bat tery Installation 1 2 3 Open the bat ter y compartment lid. Install new bat teries into the compartment. Replace the compartment lid. T wo AAA size batt eries F or correct polarity (+ and –), be sure bat ter y terminals are in contact with pins in the compartment. T o ensure saf e operation, please obser ve the f ollowing pre ...

  • Sanyo PLC-HF10000L - page 16

    16 When controlling sev eral projectors from eac h remote control at the same time, you can assign a remote control code (Code 1 - Code 8) to individual projectors and remote controls to prev ent remote control interf erence. Assign the same code the y ou specified for the projector to the remote control. See “Remote Control” on page 61 for ass ...

  • Sanyo PLC-HF10000L - page 17

    1 7 Installation Lens Installation Bef ore set ting up the projector , inst all Projection L ens on the projector . Bef ore installation, c hec k where the projector is used and prepare a suit able lens. F or the specifications of Projection L ens, contact sales dealer where you purc hased the projector . - Do not use the optional lens below f or t ...

  • Sanyo PLC-HF10000L - page 18

    1 8 Installation Pictur e Level and Pitc h A djustment AD JUST ABLE FEET REAR AD JUST ABLE FEET (R ef er to p.1 0) Projection lens can be mo ved from side to side and up and do wn with the motor -driven lens shif t function. T his function makes the positioning of images easy on the screen. T he amount of lens shif t range varies depending on the l ...

  • Sanyo PLC-HF10000L - page 19

    1 9 Installation T er minals of Project or The projector has two replaceable Interf ace board slots. The projector's functions can be extended b y inst alling the optional interface boards into the terminal slots. 2 v acant slots (Input 3 and 4) are provided in y our purc hasing the projector . F or the Optional Interface B oards, contact sale ...

  • Sanyo PLC-HF10000L - page 20

    20 Connecting t o Computer V GA Cable Monitor Output Desktop type Laptop type T er minals of the project or Monitor Output D VI-D Cable BNC Cable Monitor Output U n p l u g t he p ow e r c o r d s o f b o t h t h e projector and external equipmen t from the A C outlet before connecting cables. Cables used for connection • D VI-D cable • Serial ...

  • Sanyo PLC-HF10000L - page 21

    21 Installation Connecting t o V ideo Equipment Video Source (e xample) Prof essional Digit al V CR Video Disc Pla yer RGB SCAR T 21 -pin Output VIDEO/Y , Pb/Cb, Pr/Cr Component video output equipment. (suc h as D VD play er or high-definition TV source.) Co mp osite V ide o Out put BNC Cable D VI-D Cable SCART -VG A Cable U n p l u g t h e p o w e ...

  • Sanyo PLC-HF10000L - page 22

    22 Installation At tac hing the Cable Tie Cable tie Y ou can dress and secure all cables to a cable tie (supplied). The cable tie is reusable and can be loosened and tightened as many times as needed. Cable tie T o loosen the cable tie 1 . Pull the tab in the arro w direction. T ab 1 2 2. Loosen the cable tie in the ar row direction. ...

  • Sanyo PLC-HF10000L - page 23

    23 NOTE ON THE POWER COR D A C pow er cord must meet the requirements of the countr y where you use the projector . Confirm the A C plug t ype with the c hart below and proper A C pow er cord must be used. If the supplied A C pow er cord does not matc h your A C outlet, contact your sales dealer . Pr oject or side A C Outlet side T o PO WER CORD CO ...

  • Sanyo PLC-HF10000L - page 24

    24 Basic Oper ation Connect the projector’ s A C power cord into an A C outlet. The LAMP indicator lights red and the PO WER indicator lights green. Press the ON/S T AND-B Y but ton on the side control or the ON but ton on the remote control. T he LAMP indicator dims and the cooling fans start to operate. The preparation displa y appears on the s ...

  • Sanyo PLC-HF10000L - page 25

    25 Basic Oper ation What is PIN code? PIN (P ersonal Identification Number) code is a securit y code that allows the person who kno ws it to operate the projector . Set ting a PIN code prevents unauthoriz ed use of the projector . A PIN code consists of a four -digit number . Ref er to the PIN code loc k function in the Set ting Menu on pages 63 , ...

  • Sanyo PLC-HF10000L - page 26

    26 Ho w to Oper ate the On-Scr een Menu Basic Oper ation The projector can be adjusted or set via the on-screen menu. The menu has a hierarc hical struct ure, with a main menu that is divided into submenus, whic h are further divided into other submenus. F or eac h adjustment and set ting procedure, refer to respectiv e sections in this manual. Use ...

  • Sanyo PLC-HF10000L - page 27

    27 Basic Oper ation F or detailed functions of eac h menu, see “Menu T ree ” on pages 82-84. Main Menu Sub-Menu e Image select For computer source, used to select an image le vel among Dynamic, Standard, Real, and Image 1 -1 0 (p.39) . For Video source, used to select an image lev el among Dynamic, Standard, Cinema, and Imag e 1 -1 0 (p.47) . r ...

  • Sanyo PLC-HF10000L - page 28

    28 Basic Oper ation Lens Shift A djustment ✔ Note: • T he arrow disappears at the maximum lens shif t in eac h direction. • T he arrows t urn red when the lens shift comes to the center position of the screen. Zoom Adjustment Focus Adjustment Side Control Shutt er Function Shut ter function allows you to completely bloc k out light to the scr ...

  • Sanyo PLC-HF10000L - page 29

    29 Basic Oper ation Using the remote control for some frequently used operations is advisable. J ust pressing one of the but tons enables you to mak e the desired operation quic kly without calling up the On-Screen Menu. Press the ZO OM but tons on the remote control to zoom in and out the image. ZOOM but tons Press the FOCUS but tons on the remote ...

  • Sanyo PLC-HF10000L - page 30

    30 Basic Oper ation Press the FREEZE but ton on the remote control to freeze the pict ure on the screen. T o cancel the FREEZE function, press the FREEZE but ton again or press any other but ton. Fig.1 will appear when the F reeze function is w orking. FREEZE but ton FIL TER but ton Press and hold the FIL TER but ton for more than fiv e seconds to ...

  • Sanyo PLC-HF10000L - page 31

    31 Remote Control POINT but tons KEY ST ONE but ton Press the KEY ST ONE but ton on the remote control to switc h the Standard (for V ertical/Horizontal) /Corner correction adjustment. The Standard or Corner correction adjustment dialog box appears. Use the P oint ed 7 8 but tons to correct the Standard or Corner distortion. T he Standard or Corner ...

  • Sanyo PLC-HF10000L - page 32

    32 The input source c hanges eac h time you press the INPU T but ton on the side control as follo ws: Input 1 → Input 2 → ... Bef ore using the INPU T but ton on the side control or the remote control, you must select a cor rect input source by On-Screen Menu and the latest input source will be displa yed. Press the INPU T 1, INPU T 2, INPUT 3 ...

  • Sanyo PLC-HF10000L - page 33

    33 WHEN SELECTING INPUT 2 (5 BNC INPUT J ACKS ) INPUT MENU When your computer is connected to the INPU T 1 (ANALOG) terminal, select R GB (PC analog). RGB(PC analog) ✔ Note: • I np u t so u r ce cha n ge s i f t he IN P UT 1 b u tton o n t h e re m ot e control is pressed. When connecting the computer output [5 BNC T ype (Green, Blue, Red, Hori ...

  • Sanyo PLC-HF10000L - page 34

    34 Input Selection When the video input signal is connected to the Y , Pb/Cb, Pr/Cr jac ks, select Y , Pb/ Cb, Pr/Cr . When the video input signal is connected to the VIDEO jac k, select Video. When connecting to video equipment, select the type of Video source in the Source Select Menu. Video Y , Pb/Cb, Pr/Cr When connecting to video equipment, se ...

  • Sanyo PLC-HF10000L - page 35

    35 Comput er Input PC Syst em Menu PC Syst em Menu 1 2 PC system can also be selected manually . Selected system is display ed. Press the MENU but ton to display the on-screen menu. Use the P oint ed but tons to select Input and then press the P oint 8 or the SELECT but ton. Use the P oint ed but tons to select S ystem and then press the P oint 8 o ...

  • Sanyo PLC-HF10000L - page 36

    36 Comput er Input Auto PC Adjustment function is provided to automatically adjust Fine sync, T ot al dots, P osition H and P osition V to conform to y our computer . T o stor e the adjusted par ameters. The adjusted parameters from the Auto PC Adjustment can be stored in the projector . Once the parameters are stored, the set ting can be done just ...

  • Sanyo PLC-HF10000L - page 37

    37 Comput er Input Some computers employ special signal f ormats whic h may not be t uned by Multi-Scan sy stem of this projector . Manual PC Adjustment enables y ou to precisely adjust sev eral parameters to matc h those special signal formats. The projector has 1 0 independent memor y areas to store those parameters manually adjusted. It allows y ...

  • Sanyo PLC-HF10000L - page 38

    38 Comput er Input ✔ Note • Display area (H/V) cannot be selected when 480i, 575i, 480p, 57 5p , 72 0p , 1 0 35 i , 1 08 0i o r 1 0 80 p i s se le ct ed i n th e P C Sy stem Menu (p.35). • W h en i np u t c o m pu t e r s i g na l to t he p ro j e c to r , P C a d j u st function will become av ailable . No parameters stored This mode has sto ...

  • Sanyo PLC-HF10000L - page 39

    39 1 2 Normal pict ure lev el preset on the projector . Picture le vel with improv ed half tone for graphics. User pres et picture adjust ment in the Image adjust M enu. (pp.40-42) Image select Press the MENU but ton to display the On-Screen Menu. Use the P oint ed but tons to select Image select and then press the P oint 8 or the SELECT but ton. U ...

  • Sanyo PLC-HF10000L - page 40

    40 Image Adjust Menu Press the MENU but ton to display the On-Screen Menu. Use the P oint ed but tons to select Image adjust and then press the P oint 8 or the SELECT but ton. 1 2 Use the P oint ed but tons to select the desired item and then press the SELECT but ton to display the adjustment dialog box. Use the P oint 7 8 but tons to adjust the se ...

  • Sanyo PLC-HF10000L - page 41

    41 Clear the c heck mark if y ou do not want to apply the adjusted color data; select the c hec k mark and then press the SELECT but ton. The c hec k mark disappears. LIST MODE Ret urn to the COLOR SELECTION mode so that you can readjust the set ting for the color in that line. (This option is not av ailable if the c heck mark is cleared.) Select t ...

  • Sanyo PLC-HF10000L - page 42

    42 T o reset the adjusted data, select Reset and press the SELECT but ton. A confirmation bo x appears and then select Y es. All adjustments will ret urn to their previous figures. T o store the adjusted data, select Store and press the P oint 8 or the SELECT but ton. Use the P oint ed but tons to select one from Image 1 to 1 0 and press the SELECT ...

  • Sanyo PLC-HF10000L - page 43

    43 Select the desired screen size that conf orms to the input signal source. Scr een menu Pro vides the image within a screen size k eeping its original aspect ratio. ✔ Note • The projector cannot display any resolution higher than 20 48 x 1 08 0 . If yo ur c om p ut er ’ s s c re en r e so lu t io n is hi ghe r tha n 2 04 8 x 1 0 80 , l ower ...

  • Sanyo PLC-HF10000L - page 44

    44 Adjust the screen scale and position manually with this function. Press the P oint 8 but ton or the SELECT but ton at Custom adj. and Custom adj. is display ed on the screen, you can use the P oint ed but tons to c hoose the item you want to adjust. Scale H/V ........... Adjusts the Horizontal/V ertical screen scale. H&V ................... ...

  • Sanyo PLC-HF10000L - page 45

    45 This function is used to adjust k ey stone distortion of the projected image. Use the P oint ed but tons to c hoose the item you w ant to adjust. This function ret urns all adjusted values to the factory default set tings. Press the SELECT but ton at Reset to displa y a confirmation box. T o reset, press the SELECT but ton at Y es. Ceiling Rear ...

  • Sanyo PLC-HF10000L - page 46

    46 If the projector cannot reproduce proper video image, select a specific broadcast signal format from among P AL , SECAM , NTSC , NTSC 4.43 , P AL -M , and P AL -N . The projector automatically detects an incoming video signal, and adjusts itself to optimize its perf ormance. When the Video Sy stem is 1 035i , 1 080i or 1 080p , select the system ...

  • Sanyo PLC-HF10000L - page 47

    47 V ideo Input V ideo Input Normal pict ure lev el preset on the projector . Picture le vel adjusted with fine tone. User preset picture adjustment in the Image adjust Menu. (p.50) Image select menu 1 2 Press the MENU but ton to display the On-Screen Menu. Use the P oint ed but tons to select Image select and then press the P oint 8 or the SELECT ...

  • Sanyo PLC-HF10000L - page 48

    48 V ideo Input 1 2 Press the P oint 7 but ton to decrease the contrast; press the P oint 8 but ton to increase the contrast (from 0 to 63). Press the P oint 7 but ton to decrease the brightness; press the P oint 8 but ton to increase the brightness (from 0 to 63). Press the P oint 7 but ton decrease the intensit y of the color; press the P oint 8 ...

  • Sanyo PLC-HF10000L - page 49

    49 ✔ Note • When White balance Red, Green or Blue is adjusted, the Color temp. lev el will c hange to Adj.. • Tint cannot be selected when the video sy stem is P AL, SECAM , P AL -M or P AL -N (p.46). Press the P oint 7 but ton to lighten red/green/blue tone of the blac k level of an image; press the P oint 8 but ton to deepen red/green/blue ...

  • Sanyo PLC-HF10000L - page 50

    50 V ideo Input An interlaced video signal can be display ed in progressive mode. Press the P oint 7 8 but tons to c hange the progressive scan mode. Of f ......... Progressive scan mode is Of f . On .......... Progressiv e scan mode is On. Film ........ F or watc hing a film. W ith this function, the projector reproduces pict ures faithful to the ...

  • Sanyo PLC-HF10000L - page 51

    51 V ideo Input ✔ Note: • When no signal is detected, Normal is set automatically and the A spect dialog box disappears. • T he adjustable range for Scale H/V and P osition H/V are limited depending on the input signal. • Natural wide cannot be selected when 720p, 1 035i, 1 080i or 1 080p is selected on A V System Menu (p.46). 1 2 Press the ...

  • Sanyo PLC-HF10000L - page 52

    52 V ideo Input This function ret urns all adjusted values to the f actor y default set tings. Press the SELECT but ton at Reset to displa y a confirmation box. T o reset, press the SELECT but ton at “Y es. ” Ceiling Rear When this function is set to On, the picture will be top/ bot tom and lef t/right rev ersed. This function is used to projec ...

  • Sanyo PLC-HF10000L - page 53

    53 Set tings Press the MENU but ton to display the On-Screen Menu. Press the P oint ed but tons to select Set ting and press the P oint 8 or the SELECT but ton to access the submenu items. 1 2 Use the P oint ed but tons to select the desired item and then press the P oint 8 or the SELECT but ton to access the selected item. This projector has a Set ...

  • Sanyo PLC-HF10000L - page 54

    54 Set tings Select the bac kground color or image when no input signal is detected. Press the P oint ed but tons to switc h bet ween eac h option. Blue ................... Projects a blue bac kground. User ................... Projects a capt ured image. Blac k .................. Projects a blac k bac k ground. Allows you to select a lamp mode. 2-L ...

  • Sanyo PLC-HF10000L - page 55

    55 Select the lamp operation when the total lighting time of a lamp exceeds the recommended total hours of use. Mode 1 ............ A lamp can be turned on even after exceeding the recommended total hours of use. Mode 2 ............ A lamp can be turned on even after exceeding the recommended total hours of use. But the projector turns off automati ...

  • Sanyo PLC-HF10000L - page 56

    56 Set tings P in P : Pro vide the images of Main pict ure and Sub picture at the ratio of Screen aspect in the Screen Menu. P by P : P rovide the images of Main pict ure and Sub picture at the ratio of 4:3. Mode Main pictur e / Sub pictur e Input ..... Select an input from Input 1 -4. Source .. Select an input source. The displa y varies depending ...

  • Sanyo PLC-HF10000L - page 57

    57 Status (Stored /F ree/ A dj.) of the selected mode Set tings This function allo ws multiple projector images to be seamlessly ov erlapped. When displaying multiple screens, eliminates the dif f erence in color between the images that are projected from the projectors. Use the P oint ed but tons to select Edge blending and then press the SELECT b ...

  • Sanyo PLC-HF10000L - page 58

    58 Set tings Measured Information: When selecting “Measured Information ” , the window sho wn right appears. Current image lev el is shown. When “image ” is set to “Real” or “Cinema” , the “Standard” item in the windo w is activated. T o go bac k to the “ Advanced color mat ting” window , press any k ey . Adv anced color mat ...

  • Sanyo PLC-HF10000L - page 59

    59 This function allo ws you to customiz e the screen logo with Logo select, Capt ure, Logo PIN code loc k and Logo PIN code c hange functions. ✔ Note When On is selected in the Logo PIN code loc k function, Logo select, Capt ure and Logo PIN code c hange cannot be selected. Logo select This function decides on the starting-up display from among ...

  • Sanyo PLC-HF10000L - page 60

    60 This function pre vents an unauthoriz ed person from c hanging the screen logo. Of f ............. The screen logo can be c hanged freely from the Logo Menu (p.59). On ............. The screen logo cannot be c hanged without a Logo PIN code. If you w ant to c hange the Logo PIN code loc k set ting , press the SELECT but ton and the Logo PIN code ...

  • Sanyo PLC-HF10000L - page 61

    61 Set tings Y ou can replace the filter with this function. Press the SELECT but ton at Filter control to display a confirmation box. T o replace, press the SELECT but ton at Y es and the electrically operated filter starts to scroll. ✔ Note • Filter replacement icon and Please wait... message appear on the screen when the filter is being s ...

  • Sanyo PLC-HF10000L - page 62

    62 Set tings No signal 4 : 50 Timer lef t before Lamp is of f . F or reducing pow er consumption as well as maintaining the lamp lif e, the P ow er management function turns of f the projection lamp when the projector is not operated for a certain period. Select one of the follo wing options: Ready ................. When the lamp has been fully coo ...

  • Sanyo PLC-HF10000L - page 63

    63 Set tings Ke y lock PIN code lock This function loc ks the side control and remote control but tons to prevent operation b y unauthorized persons. . . . . . Unloc ked. . . . . . L oc k s the operation of the side control. T o unloc k, use the remote control . . . . . Loc k s the operation of the remote control. T o unloc k, use the side control. ...

  • Sanyo PLC-HF10000L - page 64

    64 When the projector is loc ked with a PIN code, the PIN code loc k symbol appears in the Guide. T o change the PIN code loc k setting T o enter a PIN code When using side control Use the P oint ed but tons on the side control to select a number . Press the P oint 8 but ton to fix the number and move the red frame pointer to the next bo x. T he nu ...

  • Sanyo PLC-HF10000L - page 65

    65 Use the P oint ed but tons to adjust the Projector ID . Projector ID ... 1 - 999. (F actor y default set ting : Projector ID 1) This f eature allo ws users to set serial communication configuration (Projector ID) when se veral projectors are connected via the RS-232C terminal (serial port) of the projector . Shut ter function is available to blo ...

  • Sanyo PLC-HF10000L - page 66

    66 When you w ant to make a digital processing of a projected image faster , set this function. Use the P oint ed but tons, select an item of Of f/Low/Mid/ High. Digital processing speed becomes fast by order of L ow → Mid → High. High is the fastest. Fig.1 ✔ Note: • T he follo wing functions are not av ailable respectively when Video dela ...

  • Sanyo PLC-HF10000L - page 67

    67 Filter replacement icon appears on the screen at a set time. ✔ Note: • Do not reset the counter when the filter or the filter cartridge is not replaced. • Timer set ting notifies that the filter needs replacement. T o replace the filter , use the filter control function (p.61). Fig.1 Filter replacement icon Filter cartridge replacement ico ...

  • Sanyo PLC-HF10000L - page 68

    68 This function allo ws you to c hange the present ation of the P - timer and ex ecute it. Select one of the follo wing options: Count up ............ The P -timer display 00 0:00 appears on the screen and the count starts (0 0 0:00– 1 80:00) Count down ....... The time set in the Timer set ting appears on the screen and the countdown starts. Ti ...

  • Sanyo PLC-HF10000L - page 69

    69 Ho w to Ov er lap the Pr ojection Imag es on a Scr een Y ou can obt ain a seamless image by using the Edge Blending function whic h blends the images projected from multiple projectors and digitally dims the edges of the images and the Color Matc hing function whic h eliminates color unev enness. F ollow the steps from 1 to 5 (or 8 if necessary) ...

  • Sanyo PLC-HF10000L - page 70

    70 ✔ Note: • Th e ove rl ap p in g a r ea mi gh t be co me u neve n de pe nd in g on t he im ag e s. In s uch a ca se , it i s r e co mm en de d to decrease the contrast of the images in the Image A djust Menu. If the colors of the lef t and right images do not matc h, then follo w the next step. Select Color matc hing in the setting menu and d ...

  • Sanyo PLC-HF10000L - page 71

    71 Maint enance and Car e Filt er Instr uctions Filter prev ents dust from accumulating on the optical elements inside the projector . Should the filter becomes clogged with dust particles, it will reduce cooling fans ’ ef f ectiv eness and may result in internal heat buildup and adversely af f ect the lif e of the projector . T his projector has ...

  • Sanyo PLC-HF10000L - page 72

    72 Maint enance and Car e T urn of f the projector , press the Main On/Off S witc h to Of f and unplug the A C pow er cord from the A C outlet. First, clean up the dust on the projector and around the air vents. 1 2 Slide and open the Filter cov er . (See the right figure.) 3 Put the ne w one bac k into the position and close the filter cov er . Ma ...

  • Sanyo PLC-HF10000L - page 73

    73 Maint enance and Car e Filter count er Be sure to reset the Filter counter af ter replacing the filter cartridge. Press the MENU but ton to display the On-Screen Menu. Use the P oint ed but tons to select Set ting and then press the P oint 8 or the SELECT but ton. Use the P oint ed but tons to select Filter counter and then press the SELECT but ...

  • Sanyo PLC-HF10000L - page 74

    7 4 Maint enance and Car e Lamp Manag ement This P rojector is equipped with 2 Projection Lamps to ensure brighter image and those lamps are controlled b y the Lamp Management F unction. T he Lamp Management F unction detects the st atus of lamps and sho ws the status on screen or on the LAMP 1/2 REPLA CE indicators. T his function also automatical ...

  • Sanyo PLC-HF10000L - page 75

    75 Maint enance and Car e Chec k the number of lamp to be replaced on the Lamp Status Display . Loosen a scre w on the Lamp Cov er . Slide and open the Lamp Cov er . (See the right figure.) 1 3 Loosen two scre ws and pull out the Lamp to be replaced by grasping handle. 4 T urn of f the projector , press the Main On/Off S witc h to Of f and unplug t ...

  • Sanyo PLC-HF10000L - page 76

    7 6 This projector uses a high-pressure lamp whic h must be handled carefully and properly . Improper handling may result in accidents, injury , or create a fire hazard. l Lam p li f etime may di f f er f rom lamp to lamp and accor ding to the environme nt o f us e. There is n o guarantee of the same lif etime for ea c h lamp. So me lamps may fail ...

  • Sanyo PLC-HF10000L - page 77

    77 Maint enance and Car e T urn of f the projector , press the Main On/Off S witc h to Of f and unplug the A C power cord from the A C outlet before cleaning. Gently wipe the projection lens with a cleaning cloth that contains a small amount of non-abrasive camera lens cleaner , or use a lens cleaning paper or commercially av ailable air blow er to ...

  • Sanyo PLC-HF10000L - page 78

    78 Maint enance and Car e The W ARNING indicators show the state of the function whic h protects the projector . Chec k the st ate of the W ARNING TEMP . indicator and the LAMP indicator to t ake proper maintenance. W ar ning Indicat ors The projector is shut down and the WARNING TEMP . indicator is blinking red. When the temperat ure inside the pr ...

  • Sanyo PLC-HF10000L - page 79

    79 T roubleshooting Bef ore calling your dealer or service center for assistance, c hec k the items below once again. 1 . Make sure y ou hav e properly connected the projector to peripheral equipment as described on pages 20–21 . 2. Chec k the cable connection. Make sure that all computers, video equipment, and po wer cords are properly connected ...

  • Sanyo PLC-HF10000L - page 80

    80 appears on the scr een – The end of lamp lif e is approac hing. Replace the lamp with a new one promptly . (See page 75) appears on the scr een – The filter is out of scroll. R eplace the filter cartridge with a new one promptly . (See pages 71 -73) The image is out of f ocus. – A djust the focus of the projector . – Chec k Projection Le ...

  • Sanyo PLC-HF10000L - page 81

    81 W ARNING: High voltag es are used t o operat e this pr ojector . Do not at t empt to open the cabinet. If problems still persist af ter following all operating instructions, cont act the dealer where you purc hased the projector or the ser vice center . Specify the model number and explain about the problem. We will advise you how to obt ain ser ...

  • Sanyo PLC-HF10000L - page 82

    82 Menu T ree Input RGB (PC analog) RGB (Scart) RGB (PC digital) RGB (A V HDCP) Input 3 RGB Video S-video Input 2 ✔ Note: •The Menu displa y varies depending on the input signal. Appendix Input 4 (F or Optional Interface Boards) (F or Optional Interface Boards) HDMI Computer Input/HDMI Input/V ideo Input Input 1 Projector Infor mation Remote co ...

  • Sanyo PLC-HF10000L - page 83

    83 HDMI Input/Video Input 0–63 0–63 0-1 5 Image adjust Contrast Brightness Red Green Blue Sharpness Noise reduction Progressiv e Gamma 0–63 0–63 0–63 0–31 Of f/On/Film Of f/ On Color management Auto pict ure control Of f/L1/L2 Color temp. Color temp. Of fset Red/Green/Blue COLOR GAMMA COLOR M. MENU Mid Lo w COLOR M. MENU Adv anced color ...

  • Sanyo PLC-HF10000L - page 84

    84 Appendix Fan control 1–30 Min. P osition 1 2 languages Bac kground Display Lamp mode 2-Lamps Edge blending On/Of f All On/Of f Blac k level T est pattern Reset Color matc hing Lamp inter val Menu of f Remote control RC sensor P ower management Setting Menu size Normal Double On Countdown Of f Of f Blue User Blac k T arget Current Constant mode ...

  • Sanyo PLC-HF10000L - page 85

    85 Appendix Indicat ors and Pr ojector Condition Chec k the indicators for the projector condition. The pr ojector is oper ating nor mally . • • • on • • • of f • • • blinking at the normal rate (approx. 1 second ON, 1 second OFF) • • • dim • • • blinking slow (approx. 2 seconds ON, 2 seconds OFF) • • • blinking ...

  • Sanyo PLC-HF10000L - page 86

    86 Appendix The pr ojector is det ecting abnor mal condition. Indicat ors Pr oject or Condition PO WER green LAMP red W ARNING TEMP . red W ARNING FIL TER orang e SHU TTER blue LAMP 1/2 REP . orang e The temperat ure inside the projector is elevated close to the abnormally high lev el. The temperat ure inside the projector is abnormally high. The p ...

  • Sanyo PLC-HF10000L - page 87

    87 Appendix The pr ojector is det ecting abnor mal condition. Indicat ors Pr oject or Condition PO WER green LAMP red W ARNING TEMP . red W ARNING FIL TER orang e SHU TTER blue LAMP 1/2 REP . orang e If the Filter counter reac hed a time set in the timer set ting , a Filter replacement icon (Fig .2) appears on the screen and the WARNING FIL TER ind ...

  • Sanyo PLC-HF10000L - page 88

    88 Appendix Compatible Comput er Specifications Basically this projector can accept the signal from all computers with the V - and H-F requency mentioned below and less than 230 MHz of Dot Cloc k. ✽ ✔ Note: • Alphabet let ter "i" placed beside some of the resolutions represents interlace signal. “T r ue ” cannot be selected. ✽ ...

  • Sanyo PLC-HF10000L - page 89

    89 Appendix When an input signal is digital from the HDMI or DVI-D terminal, ref er to the c hart below . ON-SCREEN DISPLA Y RESOLUTION H-Fr eq. (kHz) V -Fr eq. (Hz) D - VG A 6 4 0 x4 8 0 31 .470 5 9 .9 4 0 D - 4 8 0i 720 x4 8 0 i 1 5 .73 4 60 .0 0 0 D - 57 5i 720 x57 6 i 1 5. 6 25 50. 0 0 0 D - 4 8 0 p 720 x4 8 0 31 . 470 6 0. 0 0 0 D - 57 5p 720 ...

  • Sanyo PLC-HF10000L - page 90

    90 When using the optional board (D VI) “ POA -AMD23ADI” , ref er to the c hart on the previous page. When using other optional boards, ref er to the c harts below . Suppor ted Signal F or mat f or Optional Board ON-SCREEN DISPLA Y RESOLUTION H-Freq.(kHz) V -Fr eq.(Hz) D-480i 720x480 1 5.734 60.00 0 D-575i 720x57 6 1 5.625 50.0 00 D-480p 720x48 ...

  • Sanyo PLC-HF10000L - page 91

    91 Appendix T echnical Specifications Mechanical Inf or mation Projector T ype Multi-media Projector Dimensions (W x H x D) 21 .20” (W) x 1 0.55” (H) x 29.8” (D) (538.5 mm x 268.0 mm x 757 .0 mm) Net Weight 60.85lbs (27 .6 kg) Feet Adjustment 0˚ to 2.8˚ P anel Resolution LCD Panel S ystem 1 .64” TFT A ctive Matrix type, 3 panels Panel R e ...

  • Sanyo PLC-HF10000L - page 92

    92 Optional P arts Model No. Optional Interface Board (Dual-SDI) : PO A-AMD1 7SDID Optional Interface Board (Dual-Link SDI) : PO A-AMD22SDIDL Optional Interface Board (DVI / D-sub 15) : PO A-AMD23ADI Optional Interface Board (5-BNC / VIDEO) : PO A-AMD25VD3 The parts listed belo w are optionally av ailable. When ordering those parts, specify the ite ...

  • Sanyo PLC-HF10000L - page 93

    93 Configur ations of T er minals ANAL OG TERMINAL(Mini D-sub 15 pin) 5 1 2 3 4 10 9 6 7 8 15 14 13 1 1 12 CONTROL POR T CONNECT OR (D-sub 9 pin) DIGIT AL (D VI-D) TERMINAL (D VI 24 PIN) 1 9 17 2 10 18 3 1 1 19 4 12 20 5 13 21 6 14 22 7 15 23 8 16 24 USB PORT(Ser ies B) 2 3 4 1 1 3 5 7 9 11 13 15 17 19 18 16 14 12 10 8 6 4 2 HDMI TERMINAL(19 pin T ...

  • Sanyo PLC-HF10000L - page 94

    94 Appendix W rite down the PIN code number in the column belo w and keep it with this manual securely . If you forgot or lost the number and unable to operate the projector , cont act the ser vice center . Factory default set No: 1 2 3 4* Factory default set No: 4 3 2 1* * S h o u l d t h e f o u r- d i g i t n u m b e r b e c h anged, the factor ...

  • Sanyo PLC-HF10000L - page 95

    95 Dimensions Appendix Unit: inc h (mm) 5.81(147.5) 20.87(530) 21.20(538.5) 20.65(524.5) 108 Ň 8.66(220) 8.46(215) 1.18(30) 7.28(185) 23.62(600) 200.0 234.0 26.77(680) 3.03(77) 9.25(235) 9.25(235) 29.80(757.0) 5.00(127) 9.63(244.5) 10.55(268.0) 1.14(29) 9.82(249.5) 10.43(265) 10.89(276.5) 4.74(120.5) 8.27(210) 6.89(175) Screw Holes f or Ceiling Mo ...

  • Sanyo PLC-HF10000L - page 96

    96 Appendix On-Board Optional Interface B oard Input1 Input2 Dsub -DVI Component -S-video SDI Dual Link SDI Analog PC Scart Digital Analog PC Component Video/ S-Video Analog PC Scart Digital Analog PC Component Video/ S-video Digital Digital On-Board Input1 Analog PC o o o o o o o o o o o o Scart o o o o o o o o o o o o Digital o o o o o o o o o o ...

  • Sanyo PLC-HF10000L - page 97

    97 Appendix Ser ial Control Int erf ace This projector pro vides a function to control and monitor the projector's operations by using the R S-232C serial port. Connect a RS-232C serial cross cable to SERIAL PORT IN on the projector and serial port on the PC (See p.1 1). 1 2 3 Baud rate : 9600 / 1 920 0 bps P arit y c hec k : none Stop bit : 1 ...

  • Sanyo PLC-HF10000L - page 98

    98 Appendix Status Read Commands The command is sent from PC to the projector with the format belo w; “CR” [Command] [CR] Command: one c haracter (ref er to the command table below .) The projector decodes the command and ret urns the 'Character string' with the format belo w; For mat Command F unction Ret urn value Projector status C ...

  • Sanyo PLC-HF10000L - page 99

    KG2A SANY O Electric Co ., Ltd. ...

  • Sanyo PLC-HF10000L - page 100

    23 IT ALIANO Im postazione iniziale Impostazione del Codic e PIN rete Ques ta impos taz ione ser ve a inserire un Codice P IN rete al lo scopo di limitare l’ acc esso attr averso la r ete a persone non aut oriz zat e. Inserire un n umero a 4 cifre per il Codice P IN ret e nella casel la di testo e fare clic s ul pul - san te Set . L a proiet tor ...

  • Sanyo PLC-HF10000L - page 101

    ...

  • Sanyo PLC-HF10000L - page 102

    25 IT ALIANO Impostazione della po sta elet tronica Ques to proiet tore dispone di una f unzio ne di pos t a elet tronica che con - sente di inviare un mess aggio di av v iso agli utenti o all’ amministr atore quando v iene rilev ata un’ anomalia n el fun zionam ent o del p roiet tore o al raggiungim ent o della data di s cad enz a della lamp a ...

  • Sanyo PLC-HF10000L - page 103

    26 Capitolo 3 I mpostazioni e operazioni di ba se 2 Registr azione e eliminazione di indirizzi di posta elettronica Immet tere l’indiriz zo di pos ta elet tronica in “ Add addr ess” e fare clic sul tasto Set . Per c o ntrollare gli indiriz zi regist rati, f are clic sul la scheda del so t tomenu C heck /Delete . Gli indiriz zi sono elencati c ...

  • Sanyo PLC-HF10000L - page 104

    ...

  • Sanyo PLC-HF10000L - page 105

    ...

  • Sanyo PLC-HF10000L - page 106

    29 IT ALIANO Impostazione SNMP Questo proiettore of fre una funzione agent SN MP (Si mple Net work Managemen t Pro toc ol) . Il prot o col lo SNMP cons iste di un manager e di ag ent. Il gr upp o che sc ambia le informa zio ni con SNMP è chiamato “Communit y ” . Esis tono du e mo dali tà di a ccesso a una comunit à, R efer (so la le t t ura) ...

  • Sanyo PLC-HF10000L - page 107

    30 Capitolo 3 I mpostazioni e operazioni di ba se Con trollo ed eliminazione dell ’indiriz zo trap Contr ollo d ell ’indiri z zo tr ap regis trato ed elim - inazione dell’indiriz zo . Per eliminare l ’in diriz zo, sp untare la casella dav ant i all'i nd ir iz zo I P e f a re cli c sul p uls a nte Delete .  È possibile re gistr are ...

  • Sanyo PLC-HF10000L - page 108

    ...

  • Sanyo PLC-HF10000L - page 109

    ...

  • Sanyo PLC-HF10000L - page 110

    33 IT ALIANO Informazioni sulla condizione del pr oiettore Status Descrizione Normal ....................................................................... I l proiettor e è in modalità operativa normale. P ower management in operation ................... I l rispar mio energetico è in funzione. Lamp failure .................................... ...

  • Sanyo PLC-HF10000L - page 111

    34 Ca pi tol o 4 C on tro l lo d e l p roi et tore Co nt r o ll i F are cl ic su Co nt ro l sul men u principale . Il metodo di im pos tazione varia in base ai con tenuti del la pagina. Sele zionare un a pagina f acendo clic s ul rela- tivo nu mero e selezionar e le impostazioni desiderat e.  Per maggiori informazioni sui singoli eleme n ti di c ...

  • Sanyo PLC-HF10000L - page 112

    35 IT ALIANO Sistema Ques ta funzione consen te di selezionar e il sist ema del segnale di ingresso del proiettore . Le mo dalità di sis tema disponibili in bas e al segnale di ingresso sono elencat e nel menu a discesa. Se lez ionare un sistema, quindi fare clic sul pul sante Set . Sel ezi oni disp oni bili p e r l ’ingre sso RG B Elemento Desc ...

  • Sanyo PLC-HF10000L - page 113

    36 Ca pi tol o 4 C on tro l lo d e l p roi et tore Audio Ques ta funzione ser ve a regolar e l’ audio del proiettore . I valori nella casella di t es to rappresen tano lo st at o o il valore di c ontr ollo cor rent i . Elemento Descrizione V olume ................... Regola il volume audio degli altoparlanti. (0~63) Mute ......................... ...

  • Sanyo PLC-HF10000L - page 114

    37 IT ALIANO Regolazione dell’ immagine Ques t a f unzio ne c onsente di regolare le immagini proiet tate e di s alv are la modalità immagine. Per memoriz zare il val ore di regola zion e fare clic sul pulsante Store e p er cari- carlo fare clic sul pul sante Load . Contr olli Elemento Descrizione Contrast .............................. Regola i ...

  • Sanyo PLC-HF10000L - page 115

    38 Ca pi tol o 4 C on tro l lo d e l p roi et tore Regolazione PC F are cl ic su PC Adj. sul menu principale. Q uest a f unzione s er ve a regolare il segnale prove nient e dal comput er collegat o al proiet tore per ot timiz zare la vis ualiz za zione dell’immagi ne a schermo. Elemento Descrizione Current mode .... Visualizza la modalità corren ...

  • Sanyo PLC-HF10000L - page 116

    ...

  • Sanyo PLC-HF10000L - page 117

    40 Ca pi tol o 4 C on tro l lo d e l p roi et tore Elemento Descrizione Language .............. Imposta la lingua di visualizzazione sul menu su schermo del proiettor e. Auto setup ......... Esegue le funzioni Auto PC Adj e Input Search descritte di seguito in base ad ogni impostazione dopo av ere fatto clic sul pulsante Sta r t . Auto PC A dj. ... ...

  • Sanyo PLC-HF10000L - page 118

    41 IT ALIANO Im postazione del proiettore Elemento Descrizione F ilter counter ...... Visualizza il tempo di utilizzo del filtro . A zzerare il contat ore dopo la pulizia del filtro . F are clic su “Reset“ , viene visualiz- zata una schermata di conferma, quindi facendo clic su “OK“ l'orario verrà reim- postato . F ilter warning ..... ...

  • Sanyo PLC-HF10000L - page 119

    ...

  • Sanyo PLC-HF10000L - page 120

    43 IT ALIANO Indicazione dello stato della lampada Colore icona/ s fondo Status Bianco/blu Lamp ada a cc es a ( nor male) Bianco/rosso Lamp ada a ccesa (la lampa da è s tata u tiliz zat a pe r il per io do di tempo spe cif icato: sos tituir la immediat amente ) Grigio/blu Lamp ada sp enta (normale) Grigio/rosso Lamp ada sp enta ( la lampada è s t ...

  • Sanyo PLC-HF10000L - page 121

    44 Ca pi tol o 4 C on tro l lo d e l p roi et tore ...

  • Sanyo PLC-HF10000L - page 122

    ...

  • Sanyo PLC-HF10000L - page 123

    ...

  • Sanyo PLC-HF10000L - page 124

    47 IT ALIANO Gatew ay (router) installato sulla rete Conness ione del proiet tor e (P J 0 1 ) al comput er di con trollo (PC 05) attr av erso il gat eway . A un'altra rete Gruppo di Rete: 192.168.200.x Gruppo di Rete: 192.168.10.x Nome Proiettore: P J01 Indirizzo IP : 192.168.200.15 Subnet Mask : 255.255.255.0 Gateway di default : 192.168.200. ...

  • Sanyo PLC-HF10000L - page 125

    ...

  • Sanyo PLC-HF10000L - page 126

    49 IT ALIANO 3. Un a v o l t a s t a b i l i t a co r re t t a m e nt e l a co mu n i c a z i o n e, v i e n e v is u a l i z z a t a l ’ i n d i c a z i o n e “P ASSWOR D:” nella f ines tra . Digit are la password di lo gin (C odice PIN di ret e *2 ) per il proi- et tore , quindi premere il tasto “Enter” sulla tastier a. S e non è s tat ...

Manufacturer Sanyo Category Video projector

Documents that we receive from a manufacturer of a Sanyo PLC-HF10000L can be divided into several groups. They are, among others:
- Sanyo technical drawings
- PLC-HF10000L manuals
- Sanyo product data sheets
- information booklets
- or energy labels Sanyo PLC-HF10000L
All of them are important, but the most important information from the point of view of use of the device are in the user manual Sanyo PLC-HF10000L.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Sanyo PLC-HF10000L, service manual, brief instructions and user manuals Sanyo PLC-HF10000L. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Sanyo PLC-HF10000L.

Similar manuals

A complete manual for the device Sanyo PLC-HF10000L, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Sanyo PLC-HF10000L by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Sanyo PLC-HF10000L.

A complete Sanyo manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Sanyo PLC-HF10000L - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Sanyo PLC-HF10000L, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Sanyo PLC-HF10000L, that we can find in the current document
3. Tips how to use the basic functions of the device Sanyo PLC-HF10000L - which should help us in our first steps of using Sanyo PLC-HF10000L
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Sanyo PLC-HF10000L
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Sanyo PLC-HF10000L in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Sanyo PLC-HF10000L?

Use the form below

If you did not solve your problem by using a manual Sanyo PLC-HF10000L, ask a question using the form below. If a user had a similar problem with Sanyo PLC-HF10000L it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)