English dropdown-ico

Manual Pelco C1901M (4/99)

12 pages 0.18 mb
Download

Go to site of 12

Summary
  • Pelco C1901M (4/99) - page 1

    MC3800 Series 1/3-Inch Monochr ome Camera Installation/ Operation Manual C1901M (4/99) Pelco • 3500 Pelco Way • Clovis , CA 93612-5699 USA • www.pelco.com In North America and Canada: Tel (800) 289-9100 or FAX (800) 289-9150 International Customers: Tel (1-559) 292-1981 or FAX (1-559) 348-1120 ...

  • Pelco C1901M (4/99) - page 2

    2 Pelco Manual C1901M (4/99) IMPOR T ANT SAFEGUARDS AND W ARNINGS 1. Installation and servicing should only be done by qualified service personnel and conform to all local codes. 2. T o pre v ent fire or shock hazard, do not e xpose the unit to rain or moisture . DESCRIPTION The MC3800 Series cameras are 1/3-inch format monochrome CCD (charge coupl ...

  • Pelco C1901M (4/99) - page 3

    Pelco Manual C1901M (4/99) 3 NOTE: References to illus- trations in this manual are keyed to the illustrations in the manual that is supplied with the camera. MC3800-2 MC3800-2X MC3800-3 10 11 10 11 13 12 3 4 5 6 7 8 9 2 1 LOCA TION AND FUNCTION OF P ARTS Refer to Illustration B for the location of the camera parts. B T op/Front/Side/Rear V iews of ...

  • Pelco C1901M (4/99) - page 4

    4 Pelco Manual C1901M (4/99) D Changing the Plug on an Auto Iris Lens Cable 2 3 4 1 1 2 3 4 Cover (supplied) Auto-iris lens cable Rib (If the cable is thick and the plug cover does not seat properly , cut away this rib.) Lens plug (supplied) 42 1 3 Pin # DC-servo Lens Pin 3: Drive (+) Pin 1: Control (-) Pin 2: Control (+) Pin 4: Drive (-) (Ground) ...

  • Pelco C1901M (4/99) - page 5

    Pelco Manual C1901M (4/99) 5 E C CS 2 1 4 3 Lens Installation A CCD-IRIS ON OFF CCD-Iris Function ...

  • Pelco C1901M (4/99) - page 6

    6 Pelco Manual C1901M (4/99) NOT A V AILABLE ON 3800 SERIES Incident Light LENS CAMERA (STYLIZED) Iris opening (sometimes referred to as aperture) is defined by f/stop numbers. The higher the number the more closed the iris is. IRIS CCD IMAGER CCD Iris (Electronic Shutter) CCD out- put voltage is electronically sampled and used to adjust for small ...

  • Pelco C1901M (4/99) - page 7

    Pelco Manual C1901M (4/99) 7 Information Box Information Box LENS TYPE MANUAL IRIS V ARIABLE LIGHT CONDITIONS ST A TIC LIGHT CONDITIONS AUT O IRIS • Turn Manual Iris ring so iris is fully open and set the Focus ring for ∞ (or distant object). • Adjust Backfocus with CCD IRIS switch initially set to the OFF position. • Use the C/CS adjust- m ...

  • Pelco C1901M (4/99) - page 8

    8 Pelco Manual C1901M (4/99) Information Box Information Box The purpose of backfocusing is to make the adjustments necessary for the picture to remain in focus throughout the camera’s zoom range, which is the case for instance, in motorized zoom, auto iris configurations. Manual Iris lens/camera combinations also need to be backfocused. Follow t ...

  • Pelco C1901M (4/99) - page 9

    Pelco Manual C1901M (4/99) 9 G Connecting the Monitor to the MC3800 Series Cameras F Connecting the MC3800-2 12 3 1 2 CAMERA Install the camera where it will not be affected by fluorescent lights or window reflections. If the camera is used under illumination that is not steady , the picture may flicker . The MC3800-2 must be operated with a 24 V A ...

  • Pelco C1901M (4/99) - page 10

    10 Pelco Manual C1901M (4/99) I V ertical Phase V ertical phase adjustment is not vertical roll adjustment. Each camera is adjusted to the AC zero crossover point at the factory . Problems arise, however, especially in larger systems, when: 1. Switching rapidly between widely separated cameras with manual or sequential switchers. 2. Switching betwe ...

  • Pelco C1901M (4/99) - page 11

    Pelco Manual C1901M (4/99) 11 INCIDENT LIGHT LEVEL ADJUSTMENT Since the incident light level has been preset at the factory , usually no further adjustment is required. If the picture is too dark, however , or if the picture’s highlights are extremely overexposed, adjust the LEVEL adjustment screw . This adjustment can only be used for auto-iris ...

  • Pelco C1901M (4/99) - page 12

    12 Pelco Manual C1901M (4/99) REVISION HISTOR Y Manual # Date Comments C1901M 1 1/96 Original version. 4/99 Added MC3800-2X model. Revised manual to new format. ® Pelco and the Pelco logo are registered trademarks of Pelco. © Copyright 1999, Pelco. All rights reserved. Power Consumption: MC3800-2: Approximately 4.5 W MC3800-2X: Approximately 4.5 ...

Manufacturer Pelco Category Carbon Monoxide Alarm

Documents that we receive from a manufacturer of a Pelco C1901M (4/99) can be divided into several groups. They are, among others:
- Pelco technical drawings
- C1901M (4/99) manuals
- Pelco product data sheets
- information booklets
- or energy labels Pelco C1901M (4/99)
All of them are important, but the most important information from the point of view of use of the device are in the user manual Pelco C1901M (4/99).

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Pelco C1901M (4/99), service manual, brief instructions and user manuals Pelco C1901M (4/99). Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Pelco C1901M (4/99).

Similar manuals

A complete manual for the device Pelco C1901M (4/99), how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Pelco C1901M (4/99) by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Pelco C1901M (4/99).

A complete Pelco manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Pelco C1901M (4/99) - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Pelco C1901M (4/99), FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Pelco C1901M (4/99), that we can find in the current document
3. Tips how to use the basic functions of the device Pelco C1901M (4/99) - which should help us in our first steps of using Pelco C1901M (4/99)
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Pelco C1901M (4/99)
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Pelco C1901M (4/99) in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Pelco C1901M (4/99)?

Use the form below

If you did not solve your problem by using a manual Pelco C1901M (4/99), ask a question using the form below. If a user had a similar problem with Pelco C1901M (4/99) it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)