Manual Honeywell 1250g

246 pages 1.79 mb
Download

Go to site of 246

Summary
  • Honeywell 1250g - page 1

    ™ Voyager TM 1250g Sin gle -Lin e Lase r Scan ner User’s Guide ...

  • Honeywell 1250g - page 2

    Disc laimer Hone ywe ll International Inc. (“HII” ) reserves the right to mak e chan ges in spec i- ficatio ns and o ther inf ormation co ntained i n this docum ent wit hout prior notice , and the reader sho uld in al l cases co nsult H II to determine whe ther an y such change s ha ve been mad e. The inf or mat ion in this pub licatio n does n ...

  • Honeywell 1250g - page 3

    Pr oduct Agency Co mpliance USA FCC P ar t 15 Subpar t B Class B This d evic e complie s with part 15 of the FCC Rules . Operatio n is subject to the follo wing two cond itions: 1. This dev ice may not cause ha rmful inte rference. 2. This dev ice mus t accept any interfer ence receiv ed, incl uding interfere nce that m ay cause u ndesired operatio ...

  • Honeywell 1250g - page 4

    This p roduct is intend ed to be supp lied b y a Lis ted Direct P lug-In P ower unit m arked "Cla ss 2" or "LPS" and r ated 5 Vd c - 5.2 Vdc , 1A. Canada Industry Canada ICES-003 This C lass B digi tal appar atus co mplies wi th Canad ian ICES-003. Opera - tion is subjec t to the f ollo wing co nditions : 1. This dev ice may not ...

  • Honeywell 1250g - page 5

    A ustrali a/NZ C-Tick Statem ent Conf orms to AS/NZS 3548 Mexico Conf orms to NO M-019. Russia Gost -R certificate South K orea This produ ct meets K orean agency appro v al. Ta w a i n BSMI Stand ard: CNS134 38, CNS 14 336 Internat ional Laser Safety Statem ent This de vice has be en test ed in ac cordan ce with and comp lies w ith IEC608 25-1 ed2 ...

  • Honeywell 1250g - page 6

    Scanner Laser Beam W a vel ength 630 - 650 nm Div ergence < 1.5 mr ad. per IEC 60825-1 w orst cas e Max p ower o utput < 1m w Embedded Laser W a vel ength 630 - 650 nm Div ergence < 1.5 mr ad, per IEC 60825-1 w orst cas e Max p ower o utput < 10 mw Caution: Use of con trols or adjustm ents or performan ce of proce dures other than those ...

  • Honeywell 1250g - page 7

    Require d Safety Label Locat ions Part Number, Serial N umber Laser La bel, and Re vision Informati on loca tion Laser Saf ety infor mati on Laser Output ...

  • Honeywell 1250g - page 8

    ...

  • Honeywell 1250g - page 9

    i Chapter 1 - Getting S tarted About This Manual .......... ............... ................ ............. 1-1 Unpacking Your Device .............. ............. ............. ....... 1-1 Connecting the Devi ce ... ........... .......... ............. ........... 1-1 Connecting with USB ........... ............. ............... ..... 1-1 Connecting ...

  • Honeywell 1250g - page 10

    ii Gilbarco ® Term inal D efault S etting s . ....... ......... ....... .... 2-9 Honeywell Biopt ic Aux Port Configuration ..... ............ 2-10 Datalogic™ Magellan © Bioptic Aux P ort Co nfigura tion .... ....... ...... ......... ....... ...... ..... 2-10 NCR Bioptic Aux Por t Configuration ............ .............. 2-10 Winco r Nixd orf T ...

  • Honeywell 1250g - page 11

    iii Scann er-Bi optic P acket Mode . ....... ...... ......... ...... 2-34 ACK/N AK ...... ....... ....... ........ ....... ....... ...... ....... ...... 2- 34 Commun icatio n Time out ......... ....... ...... ......... ...... 2-34 Chapter 3 - Input/Out put Settings Power Up Beeper .................. .................... .................. 3-1 Beep ...

  • Honeywell 1250g - page 12

    iv Deact ivatio n Chara cter ....... ...... ....... ....... ........ ..... 3 -15 Reread Delay ..... ................. ................ ............... ........ 3-16 User-Specifi ed Reread Delay .... ............... .............. ... 3-16 Output Sequence Overview ............... ............ ............ 3-16 Output Sequence Editor . .............. ...

  • Honeywell 1250g - page 13

    v Termi nal ID T able ...... ......... ...... ....... ......... ....... ...... ...... 5-4 Data Format Editor Commands . ................. .............. .. 5-4 Move C ommands .. ......... ....... ...... ......... ....... ...... .... 5-5 Search Commands................... ................ ............. 5-6 Miscellaneous Commands ... ............... ...

  • Honeywell 1250g - page 14

    vi EAN-13 Beginni ng with 290 Adden da Required .. 6-46 EAN-13 Beginni ng with 378/379 Addenda Requir ed .................. ............. .......... 6-47 EAN-13 Beginning with 414/419 Addenda Requir ed .................. ............. .......... 6-48 EAN-13 Beginning with 434/439 Addenda Requir ed .................. ............. .......... 6-48 EA ...

  • Honeywell 1250g - page 15

    vii Chapte r 9 - Serial Programmin g Command s Conve ntions ... ....... ........ ....... ....... ...... ......... ....... ...... .... 9-1 Menu Command Syntax ...................... ................. ....... 9-1 Query Commands .......... ......... ......... ........... ......... ....... 9-2 Respo nses ... ....... ....... ...... ......... ....... ... ...

  • Honeywell 1250g - page 16

    viii ASCII Conversion Chart (Code Page 1252) ........ ....... A-3 Lowe r ASCII Re ferenc e Table .. ....... ........ ....... ...... ...... A-4 ISO 2022/ISO 646 Character Replacements.......... .... A-9 Unicode Key Maps.................. .............. ................. ... A-12 ...

  • Honeywell 1250g - page 17

    1 - 1 1 Getting Star ted About Th is Manual This U ser’ s Gu ide pro vides i nstallation and prog ram ming instructio ns f or the V o yager 1 250g sing le-line l aser scanne r . Produc t specifica tions , dimens ions, wa rranty , and cust omer sup por t inf ormation are also inclu ded. Hone ywel l bar code scanne rs are f actory prog rammed fo r ...

  • Honeywell 1250g - page 18

    1 - 2 2. The scan ner bee ps. 3. Verify the scann er operatio n by sca nning a bar code f rom the Sam ple Symbols in the back of this man ual. The uni t def aults to a USB PC K e yboard . Ref er to page 2-5 for oth er USB ter mina l sett ings. F or additi onal USB pr ogramm ing and te chnical inf ormation , ref er to “USB Appl ication No te, ” ...

  • Honeywell 1250g - page 19

    1 - 3 Connecting with RS232 Serial P or t 1. Turn off p ower to the te rminal/com puter. 2. Connec t the appropria te interfac e cable to th e scanner. 3. Plug the s erial connec tor into th e serial p ort on you r computer. Tighten t he two scre ws to sec ure the con nector to the port. 4. Once th e scanne r has been fully co nnected, power up the ...

  • Honeywell 1250g - page 20

    1 - 4 Connecting with RS485 A scan ner can be connect ed f or an IBM PO S terminal interf ace . 1. Connec t the appro priate interfac e cable to the devi ce, then to the com- puter. 2. Turn the te rminal/co mputer po wer back on . The sc anner beep s. 3. Verify the scann er operatio n by sca nning a bar code f rom the Sam ple Symbols in the back of ...

  • Honeywell 1250g - page 21

    1 - 5 Readi ng T echni ques The scanner has a vie w finder t hat projec ts a bright red a iming be am that co rre- sponds to the s canner’ s h orizontal field of vie w . The aiming beam sh ould be centere d horizontal ly ov er the bar code and must highl ight all the vertical bars of the bar code. It will not read if the aiming b eam is i n any o ...

  • Honeywell 1250g - page 22

    1 - 6 Whe n you have e ntered all the comm ands yo u want to sa ve for yo ur custom default s, scan the Save Custom D efaults ba r code. Y ou ma y ha ve a series of cus tom sett ings and want to correct a single se tting. T o d o so, just sc an th e new set ting to overwri te t he old one. For exampl e, if you had pr e vio usly saved th e setti ng ...

  • Honeywell 1250g - page 23

    2 - 1 2 Pr ogramming the Interface Intr oduc tion This ch apter des cribes how to progr am yo ur syste m for t he desired interf ace . Pr ogramming the Inte rface - Plug and Pla y Plug and Pla y bar cod es provi de instant s canner se t up f or common ly used inter faces . Note: After you s can one of the cod es, power cyc le the ho st terminal to ...

  • Honeywell 1250g - page 24

    2 - 2 RS485 Scan one of the f ollow ing “Plug and Pla y” code s to progra m the scann er for an IBM POS te rmi nal in terface. Note: After s canning one of the se codes, y ou must power cy cle the cash regi ster. Each bar co de abo v e also p rogr ams th e f ollow ing suff ix es f or ea ch symbo l- ogy: * Suffixes programmed for Code 128 with I ...

  • Honeywell 1250g - page 25

    2 - 3 OPOS Mod e The f ollo wing ba r code con figures y our sca nner f or OPO S (OLE f or Retail P o int of Sale ) by mod ifying th e f ollowin g OPOS-rel ated settings : Opti on Setting Interf ace RS232 Baud Rate 38400 RS232 Handsh aking Flow Con trol, No Tim eout XON/XOFF Off AC K/NAK Off Data Bits, Sto p Bits, a nd P arity 8 Data, 1 Stop , P ar ...

  • Honeywell 1250g - page 26

    2 - 4 USB IBM S ureP os Scan one of the f ollow ing “Plug and Pla y” code s to progra m the scann er for an IBM SurePos (USB handhe ld sc anner) or IBM S urePos (USB t ableto p scann er) interf ace. Note: After s canning one of the se codes, y ou must power cy cle the cash regi ster. Each bar co de abo v e also p rogr ams th e f ollow ing suff ...

  • Honeywell 1250g - page 27

    2 - 5 USB PC or Macintosh Ke yboard Scan on e of the f oll owing c odes to p rogram the scanne r fo r USB PC K e y- boar d or USB Ma cintosh K e yboard. Scanning these c odes al so adds a CR and LF . USB HID Scan the fo llow ing code to progra m the sc anner f or USB H ID bar code scann ers. HID Fallback Mo de If y ou attempt to set a USB interf ac ...

  • Honeywell 1250g - page 28

    2 - 6 Scan th e bar code below , then set the le ngth f or the HID F allb ack (fro m 0- 60 min utes) b y scann ing digit s from the Progra mming Chart , then sc anning Save . Def ault = 5 min utes. USB Serial Comma nds USB Ser ial Em ulation Scan one of the f ollowi ng codes to progr am the scanner to emul ate a regu- lar RS232 -based COM P o r t. ...

  • Honeywell 1250g - page 29

    2 - 7 A CK/NAK Mode Comm unication Timeout This a llow s you t o set the l ength (in millise conds) f or a t imeout f or th e host A CK/NAK respo nse. Scan the bar c ode belo w , t hen set th e timeout (from 0-65 535 millis econds) b y sc anning d igits from th e Programm ing Chart , then scannin g Save . Def ault = 2000 ms. Timeout Retries This se ...

  • Honeywell 1250g - page 30

    2 - 8 Commu nication Timeout Beeper This s election progra ms the s canner to is sue an erro r beep when a comm unicat ion timeout h as occurred. The er ror beep so und is pro- grammed u sing Number of Beep s – Error (page 3 -4). Defaul t = On. NAK Retries This s election l imits the number of NAK retries that can occur in A CK/NAK mode. Sc an th ...

  • Honeywell 1250g - page 31

    2 - 9 Ve r i f o n e ® Ruby T erminal Defa ult Sett ings Scan th e f ollow ing Plug and Pla y code t o progr am the s canner f or a V erifone Rub y terminal. Thi s bar code s ets the ba ud rate t o 1200 bps a nd the data fo r- mat to 8 data b its, Mark pa rity , 1 sto p bit and RTS/ CTS no time out. It a lso adds a line fee d (LF) suffi x and pro ...

  • Honeywell 1250g - page 32

    2 - 10 Hone ywell Biopt ic A ux P or t Config uration Scan th e f ollow ing Plug and Pla y code t o progr am the s canner f or a H one ywell bioptic scanner au xiliary por t co nfigurati on. This bar co de sets the baud rate to 38400 b ps and th e data f ormat to 8 d ata bits, no parity , 1 stop bit. Charac ter R TS/CTS wi th timeout an d 232 A CK/ ...

  • Honeywell 1250g - page 33

    2 - 11 Note: If yo u are havi ng unexp ected res ults with th is program ming co de, scan the Activate De faults bar code on p age 8-4 first, then scan th e prog ramming bar c ode above. Wincor Nixdorf T erminal Defaul t Settings Scan the fo llow ing Plug an d Pla y code to pro gram t he scann er fo r a Wincor Ni x- dorf terminal. T his bar cod e s ...

  • Honeywell 1250g - page 34

    2 - 12 Wincor Ni xdorf Beet le™ T erminal Default Sett ings Scan the follo wing Plu g and Pla y code to progra m the scanner for a Winco r Nix- dorf Beet le terminal. The f ollow ing prefix e s are prog ramm ed f or each sym bol- ogy: Note: If yo u are havi ng unexp ected res ults with th is program ming co de, scan the Activate De faults bar cod ...

  • Honeywell 1250g - page 35

    2 - 13 Wincor Nixdorf RS232 Mode A Scan the fo llow ing Plug an d Pla y code to pro gram t he scann er fo r a Wincor Ni x- dorf R S232 Mode A terminal. The f ollo wing prefix es are prog ramm ed f or each symbol ogy: Symbology Pre fix Symbology Prefix Code 128 K EAN-13 A Code 93 L GS1-128 K Codab ar N Interlea ve d 2 of 5 I UPC-A A0 Plessey O UPC-E ...

  • Honeywell 1250g - page 36

    2 - 14 K eyboa rd Country La y out Sca n the app ropr iate count r y code below to p rogram the keyboar d lay out f or y our country or lan guage. As a gene ral rule, the f ollo wing char acters a re sup- ported, bu t need sp ecial care f or c ountries othe r than the U nited Sta tes: @ | $ # { } [ ] = / ‘ < > ~ * United States Alba nia A ...

  • Honeywell 1250g - page 37

    2 - 15 K ey boar d Country ( contin ued) Canada (Frenc h) Canada (Mul tiling ual) Croatia Czech Czech (QWERTY) Czech (QWERTZ) Canada (French legacy) Denmark Czech (Programmers) China Faeroese Eston ia Dutch (Netherla nds) ...

  • Honeywell 1250g - page 38

    2 - 16 K ey boar d Country ( contin ued) Gaelic Germany Greek Greek (220 Latin) Greek (220) Greek (319 Latin) Greek (319) France Greek (Latin) Greek (MS) Finla nd Hungarian (101 key) Hebrew Greek (Polytonic) ...

  • Honeywell 1250g - page 39

    2 - 17 K ey boar d Country ( contin ued) Iceland Ireland Italy Japan ASCII Kazakh Kyrgyz (Cyrillic) Hungary Latin A merica Latvia Korea Lithuani a (IBM) Lithuan ia Latvia (QW ERTY) Italian (142) ...

  • Honeywell 1250g - page 40

    2 - 18 K ey boar d Country ( contin ued) Malta Mongolia n (Cyril lic) Norway Pola nd Polish (214) Polish (Programmers) Portug al Macedonia Rom ania Russia SCS Russian (Typewriter) Russian (MS) ...

  • Honeywell 1250g - page 41

    2 - 19 K ey boar d Country ( contin ued) Serbia (Latin) Slovakia Slovakia (QWERTY) Slovakia (QWERTZ) Slovenia Spai n Spanish variation Serbi a (Cyril lic) Sweden Switzerl and (French) Tata r Switzerl and (German) Thailan d ...

  • Honeywell 1250g - page 42

    2 - 20 K ey boar d Country ( contin ued) K ey boar d W e dge Modif ier s AL T Mode If y our bar code contains special charact ers from the e xtend ed ASCII ch ar t f or e xample , an e with an acc ent gr av e (è), you wi ll use AL T Mode . (See Extende d ASCII Chara cters on page A-5 .) Note: Scan the ALT mo de bar co de after scan ning the a ppro ...

  • Honeywell 1250g - page 43

    2 - 21 If y our k eys trokes require us ing the AL T ke y and 3 char acters , scan the 3 Charac ters b ar code . If your k e ystrok es require the AL T k ey an d 4 chara c- ters , scan the 4 Charac ters bar code . The data is th en output with the sp e- cial charact er(s). Def ault = Of f. K eyboar d Style This p rogr ams k eyboard styles , such as ...

  • Honeywell 1250g - page 44

    2 - 22 A ut ocaps via NumLo ck bar c ode shou ld be scann ed in cou ntries (e.g ., Germany , F r ance) whe re the Caps Lock ke y cannot be used to toggle Caps Loc k. The N umLoc k option works sim ilarly to the regular A utoc aps, b ut uses t he NumL ock k e y to retrie v e the cu rrent state of the Ca ps Loc k. Em ulate Extern al Ke yboar d should ...

  • Honeywell 1250g - page 45

    2 - 23 Contr ol + ASCII Mode On: The sca nner send s ke y com binations f or A SCII control characters f or v alues 00-1F (re fe r to the ASCII Con version C hart (Code Page 1252) , page A-3). Win dows is the pref erred mode . All ke y- boar d country codes are supported. DOS mode is a leg acy mode , and it does n ot support all k eyb oard coun tr ...

  • Honeywell 1250g - page 46

    2 - 24 betw een scan c odes . Set the le ngth (in m illisecond s) f or a dela y b y s can- ning th e bar code below , then set ting the de la y (from 1-3 0) by sc anning di g- its from the Pro gram ming Ch art , then sca nning Save . Def ault = 0 (800 µs) . <F0> Break Cha racter When your ke ybo ard det ects t hat any key is be ing pre ssed, ...

  • Honeywell 1250g - page 47

    2 - 25 RS232 Mo difiers RS232 Baud Rat e Baud Rate send s the data from the scanner t o the termina l at the spe cified ra te. The host terminal must be se t for th e same baud rate as the sca nner . Def ault = 9600. 300 2400 600 1200 4800 38400 * 9600 19200 115,200 57,600 ...

  • Honeywell 1250g - page 48

    2 - 26 RS232 W ord Length: Data Bits, Stop Bits , and P ari ty Data Bits sets the word length at 7 or 8 bits of data per ch aracter . If an applic ation req uires on ly ASCII He x charac ters 0 through 7F decimal (te xt, digits , and p unctuation), select 7 data bits . F or applic ations th at require use of the full ASCII set, select 8 data bit s ...

  • Honeywell 1250g - page 49

    2 - 27 RS23 2 Hands haking RS232 Handsh aking all ows c ontrol of da ta tr ansmissio n from the scanner using software comman ds from th e host de vice . Whe n R TS/CTS is turned Off , no data flo w control is used. Flow C ontrol, No Tim eout : The scanner as ser ts R TS when it has data to send, and wil l wait ind efin itely f or CTS to be as ser ...

  • Honeywell 1250g - page 50

    2 - 28 and C TS is not a sser ted, the de vice transmi t buf fer is cleare d and scann ing ma y re sume . Def ault = R TS/CTS O ff. RS232 Timeout When using Flow Co ntrol with Timeo ut, you mu st progr am the length of the dela y y ou w ant to w ait f or CTS from the host. Set the len gth (in mi llisec- onds ) f or a t imeou t by scann ing the bar ...

  • Honeywell 1250g - page 51

    2 - 29 data tr ansmis sion st ops. T o resum e transm issio n, the hos t sends t he XON char acter (DC1, he x 11). Data tran smissi on contin ues where it left of f when XOFF w as sent. Def ault = XON/XOFF Off . A CK/NAK After tran smitting data , the scanner wait s for an ACK character (he x 06) or a NAK char acter (hex 15) respon se from the h os ...

  • Honeywell 1250g - page 52

    2 - 30 num ber of retries (fro m 0-255) b y scan ning digi ts from the Prog rammi ng Char t , then sc anning Sa ve . (5 is the recommen ded set- ting.) De fault = 0. Commu nication Timeout Beeper This s election progra ms the s canner to is sue an erro r beep when a comm unicat ion timeout h as occurred. The er ror beep so und is pro- grammed u sin ...

  • Honeywell 1250g - page 53

    2 - 31 Support BEL/CAN in A CK/NAK This p rotocol res ponds to <BEL> and <CAN> comman ds when in ACK/ NAK mode . The scanner soun ds an error tone w hen a <BEL> comm and is sent fro m the hos t. <CAN> terminat es the transmissi on. Default = BEL/ CAN Off . RS 232 Def aults If y ou w ant the cus tom RS23 2 def ault se ttings ...

  • Honeywell 1250g - page 54

    2 - 32 Block Check Cha racter When this se lection i s set to Tr a n s m i t , the NCR Block Check Char acter (BCC) is ex pected with i ncoming me ssages and tran smitted wi th outgoing messag es. Defaul t = T ransmi t. NCR Prefix This selection allows y ou to program an NCR-specific prefix. Refer to th e ASCI I Conversi on Chart (Co de Page 12 52) ...

  • Honeywell 1250g - page 55

    2 - 33 NCR Prefix/Suff ix When s et to T ransmi t , both the NCR prefi x and suffix are tr ansmit ted with bar cod es. Us ually , prefix es an d suffix es are progra mmed us ing the Data Editi ng selec tions (se e Data Editing beginn ing on pa ge 4-1) , ho we ve r , the f ollow ing co mmands ov erride an y other pr efix/suffix settings . Def ault = ...

  • Honeywell 1250g - page 56

    2 - 34 Scanner-Bioptic P ac ket Mode P acke t Mode On m ust b e scann ed to se t the sc anner’ s f or mat so it is com- patib le wi th a biopt ic scanner . Default = P ac k et Mode Off . A CK/NAK After tra nsmitting data, t he scanne r waits for an ACK c haracter (hex 06 ) or a NAK char acter (hex 15) respon se from the h ost. If AC K is received ...

  • Honeywell 1250g - page 57

    3 - 1 3 Input/ Output Setting s P o wer Up Beeper The sca nner can be p rogr ammed to b eep whe n it’ s po were d up . Scan the Off bar code (s) if y ou don’t w ant a powe r up beep . Def ault = P ower Up Beeper On - Scanner . Beep on B EL Char acter Y ou may w ish to f orce the s canner to be ep upon a com mand sent from the host. If y ou scan ...

  • Honeywell 1250g - page 58

    3 - 2 Good Re ad and E rror Indicat or s Beeper – Good Read The bee per ma y be progra mmed On or Off in respons e to a goo d read. T urning this option off , on ly turns off the beeper res ponse to a go od read indica tion. All error and menu bee ps are still audib le . Default = Beeper - Good R ead On . Beeper V olume – Good Read The beeper v ...

  • Honeywell 1250g - page 59

    3 - 3 Beep er Pitc h – Good Read The bee per pitch codes modi fy the pitch (frequen cy) of the beep the scan- ner emi ts on a go od read. De f ault = Medium. Beepe r - T ransmit Or der The beeper tr ansmit or der determines wh en the goo d read bee p occurs . The scanner can be set to emit the g ood read beep either be fore or after data tr ansm ...

  • Honeywell 1250g - page 60

    3 - 4 Beeper Duration – Good Read The beeper dur ation codes mod ify the length of the beep the scann er emits on a go od read. Def ault = Normal. Number of Beeps – Good Read The number of b eeps of a good read can be pro gram med from 1 - 9. The same number of beeps wi ll be app lied to the beeper an d LED in response to a good read. F or e xa ...

  • Honeywell 1250g - page 61

    3 - 5 T o change the num ber of error beeps , scan the b ar code belo w and then scan a digit (1-9 ) bar code and the Save b ar code on the Programmi ng Chart inside the b ack cov er of this manual . Defau lt = 1. Number of Error Beep s/LED Flashes ...

  • Honeywell 1250g - page 62

    3 - 6 LED Indicat ors The g reen an d red LEDs c an be progr ammed to be On or Off and at d iff erent brightne ss le ve ls to ind icate v arious scanne r states . Use the fo llowin g bar codes to progr am the L ED indic ators. LED Settings Def ault = Red LED Off with Laser, Green LED On with Good Scan . Green LED Off * Red LED Off * Green LED On wi ...

  • Honeywell 1250g - page 63

    3 - 7 LED Brightness Def ault = Red High, G reen Hi gh. In-Sta nd and Out-Of- Stand Se ttings The fol lowing settings progr am the sc anner’ s b ehav ior when it is eit her in the stand, or out of th e stand (ha nd-held). Red LED On with CT S Green LE D On with CTS Green Off Red Off Green Lo w Re d Low Green Medi um Red Medi um * Red High * Green ...

  • Honeywell 1250g - page 64

    3 - 8 Caution: When w orking with In-Stand and Out-of-Sta nd settings, enab le the settings you want before disa bling those you do not want to use. If y ou disable s ettings firs t, you may prog ram the scan ner so it is u nable to read bar codes. i f this happens , power cycle the scan ner and scan the defaults bar code on page 1-6 . In-Stand and ...

  • Honeywell 1250g - page 65

    3 - 9 Presen tation Mode wi th CodeGate® Out-of-Stand : When the sc anner is not in the stand, it automatical ly detects bar cod es and decodes them. How e v er , the d ata is not tr ansmitte d until y ou pull the trigger . The laser remain s on briefl y after the transm ission. (If y ou a re accus tomed to a V oy- ager 9540, this s etting is the ...

  • Honeywell 1250g - page 66

    3 - 10 good read . If you sc an Do Not End Manual Ac tivation Afte r Good Read , the las er remain s on after a good read , but the trigger m ust be press ed to scan t he ne xt bar code . De fault = End Man ual Activ ation Aft er Good Rea d. Manual Activation Laser Timeout - T rigge r Settings Y ou can set a ti meout f or the length of time the l a ...

  • Honeywell 1250g - page 67

    3 - 11 CodeGate ® When Cod eGate is On , the trigger is used to allo w decoded d ata to be tra nsmitted to the host s ystem. The scanner remains o n, scanning and decodi ng bar co des, b ut the bar code data is not tr ansmi tted until the trig- ger is press ed. When CodeGate is Of f , bar cod e data is tr ansmit ted when it is d ecoded. Def ault = ...

  • Honeywell 1250g - page 68

    3 - 12 End Object Detection After Good Re ad After a bar code is succes sfully dete cted and r ead from th e scanne r , the laser c an be prog rammed either to re main on and scan ning, or to tur n of f . When End Object Detec tion After Good Read is e nabl ed, the laser turns off and stops sc anning a fter a good read. If y ou sc an Do Not End Obj ...

  • Honeywell 1250g - page 69

    3 - 13 Objec t Detectio n Distan ce When the scanne r is in the stand an d yo u are usin g Object D etection Mode , yo u can set the dis tance ra nge f or detecting objects . Short sets the scann er to detec t objects appro ximatel y 5 inche s (12.7cm) a w a y from the nose. Long se ts it to de tect obje cts appro xima tely 10 i nches (25.4c m) awa ...

  • Honeywell 1250g - page 70

    3 - 14 to read the al phanumeri c combin ation that repre sents that ASCII ch aracter. Sca n Save to finish . End Characte r Activa tio n After Good Read After a bar code is succes sfully dete cted and r ead from th e scanne r , the laser c an be prog rammed either to re main on and scan ning, or to tur n of f . When End Character Activ ation After ...

  • Honeywell 1250g - page 71

    3 - 15 Charact er Deac tiv ation Mo de If y ou ha v e sent a cha racter fro m the hos t to trigger the scanner t o begin sca n- ning, y ou ca n also se nd a deact iva tion char acter to stop scann ing. Scan th e On bar cod e belo w to use c haracte r deactiv ation, t hen use D eactiv ation C haracter (f ollo wing) to select the c haracte r you will ...

  • Honeywell 1250g - page 72

    3 - 16 Reread Del a y This s ets the t ime period b efo re the scan ner can re ad the same bar c ode a se c- ond tim e. Sett ing a rerea d dela y prot ects agai nst accide ntal reread s of the same bar code . Longe r dela ys are eff ectiv e in mini mizing accident al rereads . Use sho r ter dela ys in applic ations where repe titive bar cod e scann ...

  • Honeywell 1250g - page 73

    3 - 17 the Un iv ersal v alues , show n belo w . The se are the def aults. Be certain y ou wa nt to delete o r clear al l f ormats bef ore y ou read t he Default Sequence sy mbol. Note: If Co deGate is enabled , you m ust hold t he trigge r while re ading ea ch bar cod e in a se quence. Note: To m ake Output Sequence Editor sel ections, you’ll n ...

  • Honeywell 1250g - page 74

    3 - 18 Output Sequence Example In this ex ample , you a re scann ing Code 93 , Code 1 28, and Cod e 39 bar codes , b ut you want the sc anner to outpu t Code 39 1st, Code 128 2nd, and Code 93 3rd, as shown belo w . Note: Code 93 must b e enabled to use th is example . Y ou would s et up the s equence editor w ith the f ollo wing c ommand line : SEQ ...

  • Honeywell 1250g - page 75

    3 - 19 SEQBL K sequenc e editor s tar t co mmand 62 cod e ident ifier for Code 39 0012 A - Code 39 s ample leng th (11) plus CR suffix (1) = 12 41 st ar t char acter matc h f or Code 39, 41h = “A” FF termination st ring f or first cod e 6A c ode id entif ier for Code 128 0013 B - C ode 128 sampl e leng th (12) plus CR su ffix (1 ) = 13 42 st ar ...

  • Honeywell 1250g - page 76

    3 - 20 Sequence M atch Beeper By def ault , the sca nner beeps when a se quence m atch is f ound. If yo u w ant the sc anner to re main silent , scan th e Sequence Matc h Beep er Off bar co de bel ow . D efaul t = Sequenc e Match B eeper On. P ar tial Sequence If an output se quence oper ation is terminated bef ore all y our ou tput sequen ce crite ...

  • Honeywell 1250g - page 77

    3 - 21 When the output se quence is Off , the bar code data is outpu t to the host as the scanner dec odes it. De fa ult = Off . No Read With N o Read turned On , the scanner notifies you if a code cannot be read. If using an EZConfig-Sc anning T ool Scan Data W indow (see page 8-2 ), an “NR” appea rs when a code cannot be read . If No Read is ...

  • Honeywell 1250g - page 78

    3 - 22 ...

  • Honeywell 1250g - page 79

    4 - 1 4 Data Edit ing Pref ix/Suff ix Overvie w When a bar code is scanned , addition al inf ormation is sen t to the h ost compute r along w ith the bar c ode data. This gr oup of bar code data an d addition al, use r-defin ed dat a is cal led a “m essage stri ng. ” T he selec tions in thi s sect ion are u sed to b uild the u ser-define d data ...

  • Honeywell 1250g - page 80

    4 - 2 symbo logy to wh ich you wa nt to appl y the prefi x or suffi x. For examp le, for Code 128, Code ID i s “j” and He x ID is “6A”. Step 3. Scan the 2 hex digits from the Programming C hart inside the bac k cover o f this ma nual or scan 9 , 9 fo r all symbo logies. Ste p 4. Determin e the hex value from th e ASCII Con version Chart (Co ...

  • Honeywell 1250g - page 81

    4 - 3 Ste p 1. Scan the Clear One Pre fix or Clear One Suffix symbol. Ste p 2. Determ ine the 2 digit Hex value from the Symbol ogy Char t (includ ed in the Symbol ogy C harts , beginni ng on p age A-1 ) for the symbo logy from w hich yo u want to cl ear the pref ix or suff ix. Ste p 3. Scan t he 2 di git hex v alue f rom th e Prog ramming Chart in ...

  • Honeywell 1250g - page 82

    4 - 4 Suffix Selec tions T ransmi t Altern ate Exte nded ASCII Charac ter s Y ou ma y need t o emulate special ke yboard function s, su ch as up or down arrow s, Alt/M ake or Alt/Break co mmands , that ar e not supported in the Extende d ASCII Chara cter tabl e. Ref er to Alternate Exten ded ASCII Characters (page 4-5 ) f or a range of k eyb oard f ...

  • Honeywell 1250g - page 83

    4 - 5 Alternate Ex tended ASCI I Character s DEC HEX Keyb oard Function DEC HEX Keyboard Function 128 80 up arr ow ↑ 152 98 F9 129 81 down ar row ↓ 153 99 F10 130 82 right arrow → 154 9A F1 1 131 83 left ar row ← 155 9B F12 132 84 Ins ert 156 9C Numer ic Keypad + 133 85 Del ete 157 9D Numer ic Keypad - 134 86 Home 158 9E Numer ic Keypad * 1 ...

  • Honeywell 1250g - page 84

    4 - 6 Func tion Co de T ransmit Whe n this se lection is e nabl ed and fun ction co des are conta ined withi n the scann ed data, th e scanner tr ansmits the func tion code to the terminal. Charts of th ese functio n codes a re prov ided in Su pported Int erface Keys starting on page 7-2 . When the s canner is in k ey board wed ge mode , the scan c ...

  • Honeywell 1250g - page 85

    4 - 7 Inte rc harac ter , Inte rfuncti on, and Inte rmessa ge Dela ys Some terminals drop i nf or mati on (chara cters) if d ata comes thro ugh too qu ickl y . Inte rcharac ter , inte rfunction, and intermessa ge dela ys sl ow th e transm ission of data, in creasing data inte grity . Intercharact er Delay An in terchar acter dela y of up to 5 000 m ...

  • Honeywell 1250g - page 86

    4 - 8 Ne xt, scan th e Character to T rigger De lay bar c ode, th en the 2-d igit he x v alue f or the ASCII chara cter that will t r igg er the dela y ASCII Conver sion Chart (Code Page 12 52) on page A-3. T o r e mo ve t h is d e l ay , s c a n t h e Delay Leng th bar code, and set the num ber of dela ys to 0. Sca n the Save bar cod e using the P ...

  • Honeywell 1250g - page 87

    4 - 9 Inte rmessa ge Dela y An in termessage de la y of up to 5000 millis econds (in 5ms i ncrements ) ma y be p laced be tween eac h scan tr ansmissio n. Scan the Intermessa ge Dela y bar code be low , then sc an the n umber of 5ms dela ys , and the Save bar co de usin g the Pr ogr amming Chart ins ide the ba ck co v er of this ma n- ual. T o remo ...

  • Honeywell 1250g - page 88

    4 - 10 ...

  • Honeywell 1250g - page 89

    5 - 1 5 Data Formatting Data Forma t Editor Int ro duction Y ou may use the Data F or mat Edi tor to change the scanner’ s output. F or ex am- ple, you c an use the Data Format Edit or to insert charac ters at certain points in bar code data as i t is scanne d. The se lections in the f oll owing p ages ar e used only if you wish to alter th e out ...

  • Honeywell 1250g - page 90

    5 - 2 you ar e progr ammin g. (See Primary/Alternate Data Forma ts on page 5-10 for furth er information .) Step 3 . Termi nal Type Refer to Terminal ID T able (page 5-4) and l ocate the Terminal ID number for yo ur PC. Scan thr ee nume ric ba r codes on the Prog rammi ng Char t to progra m the scann er for your term inal ID (you must e nter 3 digi ...

  • Honeywell 1250g - page 91

    5 - 3 Other Pr ogramming Selections Clear One Data Format This d eletes one data format for o ne symb ology. If you a re cleari ng the primary format, s can 0 from the Programming Chart insi de the bac k cover of this manual. If yo u are clearin g an alternate form at, scan 1 , 2 , or 3 , depending on the f ormat yo u are cl earing. S can the Termi ...

  • Honeywell 1250g - page 92

    5 - 4 Data Format Edi tor Commands Send Commands Send all charac ters F1 Includ e in the o utput messa ge all of t he characters from the input mess age, starting from curren t cursor p osition, f ollowed by an inser t chara cter. Syntax = F1xx where xx stands for the ins ert character ’s hex value for its ASCII code. Ref er to the ASCII C onvers ...

  • Honeywell 1250g - page 93

    5 - 5 Send all character s up t o a particular c haracter F3 Includ e in the o utput mes sage all ch aracters fr om the inp ut message , startin g with the cha racter at the c urrent curs or position and continui ng to, but n ot inclu ding, the s earch ch aracter “ss,” f ollowed by an insert charac ter. The c ursor is mov ed forwar d to the “ ...

  • Honeywell 1250g - page 94

    5 - 6 Move the cur sor to t he beginning F7 Move the cursor to the firs t character in the input messag e. Syntax = F7. Move the cur sor to t he end EA Mov e the cu rsor to the l ast chara cter in th e input mess age. Syntax = EA. Search Commands Sear ch f orwar d f or a c haracter F8 Search t he input m essage forward for “xx” c haracter fro m ...

  • Honeywell 1250g - page 95

    5 - 7 Sear ch f orwar d f or a non-matc hing ch aracter E6 Search th e input me ssage forwa rd for the firs t non-“xx” chara cter from the current cu rsor posit ion, leav ing the c ursor poin ting to the non-“xx” chara cter. Syntax = E 6xx where xx stand s for the s earch ch aracter’s hex va lue for its ASCII code. Ref er to the ASCII Con ...

  • Honeywell 1250g - page 96

    5 - 8 Compare char acters FE Compare the charac ter in the current cu rsor posi tion to the characte r “xx.” If characte rs are equa l, move the cursor forw ard one p osition. Syntax = FExx whe re xx stan ds for the comparis on chara cter’s hex value for its ASCII code. Ref er to the ASCII C onversion Chart (Code Page 1252) on page A-3 for de ...

  • Honeywell 1250g - page 97

    5 - 9 Data Format ter On, Not Required, Drop Prefix/Suffix Sca nned da ta is mod ifie d accor ding to your da ta forma t. If a da ta form at is foun d for a part icular symb ol, those prefixes and suffixe s are n ot transm itted. Data Format Requi red, Keep Prefix/Suffix Scanned data is modified accordin g to your d ata format, an d prefixes and su ...

  • Honeywell 1250g - page 98

    5 - 10 will sound. If y ou wis h to hear th e error tone when a non-m atching ba r code i s f ound, sc an the Data Format Non-Matc h Error T one On bar code . Def ault = Data F ormat Non-Matc h Error T one On . Pri mary/Altern ate Data F ormats Y ou can sa ve up to f our dat a f ormats, a nd sw itch be tween the se f ormats. Y our primary data f or ...

  • Honeywell 1250g - page 99

    5 - 11 F or e xample , y ou ma y ha v e set yo ur de vice to th e data f ormat yo u sav ed a s Data F ormat 3. Y ou can s wit ch to Data F ormat 1 f or a sin gle trigger pull by scanni ng th e Single Sc an-Data For mat 1 bar code belo w . T he ne xt bar code t hat is sc anned uses Data F ormat 1, th en re v er ts bac k to D ata F ormat 3. Single Sc ...

  • Honeywell 1250g - page 100

    5 - 12 ...

  • Honeywell 1250g - page 101

    6 - 1 6 Symbologies This pro gram ming sec tion con tains the fol lowing menu s electio ns. Ref er t o Chapte r 9 for set tings and def aults . All Symbolog ies If y ou w ant to dec ode all t he symbolo gies allo wab le f or y our s canner , scan the All Symbolog ies On code . If on the other ha nd, you wan t to decode o nly a par t icular symbol o ...

  • Honeywell 1250g - page 102

    6 - 2 Mess age Lengt h Descri ption Y ou are ab le to set the va lid readi ng length of some of th e bar code symbolo- gies . If the data lengt h of the sc anned ba r code doe sn’t mat ch the v alid read- ing len gth, the s canner will i ssue an error t one. Y ou ma y wis h to set the s ame v alue f or mi nimum and maximu m length to f orce the s ...

  • Honeywell 1250g - page 103

    6 - 3 Codabar <Default All Codabar Settings> Codabar On/Off Codabar Star t / Stop Characters Start/Stop charac ters identi fy the leadin g and trail ing ends of the bar cod e. Y ou may either tr ansmit, o r not tran smit Start/Stop char acters . Def ault = Don ’t T ransmit . Coda bar Chec k Characte r Codab ar chec k char acters are created ...

  • Honeywell 1250g - page 104

    6 - 4 When C heck C haracte r is set to V ali date, but Do n’t T ransmit , the unit wi ll only read Coda bar bar codes printed with a c heck charact er , but wi ll not tra nsmit the c heck c haracte r with the s canned data. Codabar Concatena tion Codab ar supports symbol c oncatenatio n. When y ou en able concate na- tion, th e scanne r looks f ...

  • Honeywell 1250g - page 105

    6 - 5 Sele ct Require to pre v ent th e scan ner from dec oding a single “D” Codabar symb ol without its co mpanion. This selec tion has no eff ect on Codabar symbols without Stop /Star t D char acters. Concatenatio n Timeout When searching for bar codes during concaten ation, y ou ma y wish to set a d ela y used t o find the ne xt bar cod e. S ...

  • Honeywell 1250g - page 106

    6 - 6 Codabar Message Length Scan th e bar code s belo w to chang e the mes sage len gth. Ref er to Mess age Length D escription (page 6-2) f or a dditional inf ormation. Mini- mum and Ma ximum le ngths = 1 -80. Mi nimum Defaul t = 3, Max imum Def ault = 80. Minimum M essage Length Maximum Message L ength ...

  • Honeywell 1250g - page 107

    6 - 7 Code 39 < Default All Code 39 Setting s > Code 39 On/Off Code 39 Star t / Stop Cha racters Start/Stop charac ters identi fy the leadin g and trail ing ends of the bar cod e. Y ou may either tr ansmit, o r not tran smit Start/Stop char acters . Default = Don’t T ransm it. Code 39 Chec k Ch aracter No Chec k Character indica tes that th ...

  • Honeywell 1250g - page 108

    6 - 8 When Chec k Char acter is se t to V a lidate and T ransm it , th e scanner on ly read s Code 39 b ar codes printed with a c hec k chara cter , an d will transmi t this ch aracter at th e end of the sca nned data. Def ault = No Check Charac- ter. Code 39 Redundancy If you ar e encou nter ing e rrors when re ading Code 39 bar co des, you may w ...

  • Honeywell 1250g - page 109

    6 - 9 Code 32 Pharmaceutic al (P ARAF) Code 32 Pharmaceutical is a f orm of the C ode 39 sym bology u sed by Ital- ian pha rmacies. T his sym bology is a lso kno wn as P ARA F . Full ASCII If Ful l ASCII Code 39 decod ing is enabled , cer ta in charac ter p airs wi thin the ba r code symbol w ill be interpreted as a sing le chara cter . F or e xamp ...

  • Honeywell 1250g - page 110

    6 - 10 Char acter pai rs /M and /N decode a s a minu s sign an d period resp ectiv ely . Char acter pai rs /P throug h /Y decode as 0 through 9. Interl eaved 2 of 5 < Default All Interl eaved 2 of 5 Settings > Interl eaved 2 of 5 On/Off NULL Charact ers Interlea ve d 2 of 5 re quires an e v en n umber of cha racters . When an odd num ber of c ...

  • Honeywell 1250g - page 111

    6 - 11 Check Digit No Chec k Digit indica tes that t he scanner re ads and tr ansmit s bar code data with or without a chec k digit . When Che ck Di git is se t to V a lidate, but Don’ t T ransmit , the u nit on ly read s Interlea ve d 2 of 5 ba r codes p rinted with a c heck digit, b ut will not tra nsmit the c heck d igit with th e scanne d dat ...

  • Honeywell 1250g - page 112

    6 - 12 Interleave d 2 of 5 Messag e Length Scan th e bar code s belo w to chang e the mes sage len gth. Ref er to Mess age Length D escription (page 6-2) f or a dditional inf ormation. Mini- mum and Ma ximum le ngths = 1 -80. Mi nimum Defaul t = 6, Max imum Def ault = 80. NEC 2 of 5 < Default All NEC 2 of 5 Settings > NEC 2 of 5 On/Off Check ...

  • Honeywell 1250g - page 113

    6 - 13 When Check Digit is se t to V alid ate and T ransmi t , the scann er only read s NEC 2 of 5 bar c odes printed with a che ck d igit, and wi ll trans mit this di git at the e nd of the s canned d ata. Def ault = No Check Digit. NEC 2 of 5 Redundancy If y ou are en countering erro rs when reading NEC 2 of 5 ba r codes, you ma y wa nt to adjust ...

  • Honeywell 1250g - page 114

    6 - 14 Code 93 < Default All Code 93 Set tings > Code 93 On/O ff Code 93 Redundancy If you ar e encou nter ing e rrors when re ading Code 93 bar co des, you may w ant to adjust the redund ancy count. Red undancy adjus ts the number of times a bar code is deco ded bef ore tr ansm ission, w hich ma y reduce the num ber of errors . Note th at th ...

  • Honeywell 1250g - page 115

    6 - 15 Code 93 Messag e Length Scan the bar code s belo w to ch ange the mes sage len gth. Ref er to Mess age Length D escription (page 6-2) f or a dditional inf ormation. Mini- mum and Ma ximum le ngths = 1 -80. Mi nimum Defaul t = 3, Max imum Def ault = 80. Stra ight 2 of 5 In dustria l (thre e-bar start/st op) <Default All Straight 2 of 5 Ind ...

  • Honeywell 1250g - page 116

    6 - 16 scan a redundan cy count between 0 and 10 o n the Progr ammin g Chart inside the bac k co ver of this man ual. The n scan the Sa ve bar code. Def ault = 0. Straight 2 of 5 Industrial Messag e Length Scan th e bar code s belo w to chang e the mes sage len gth. Ref er to Mess age Length D escription (page 6-2) f or a dditional inf ormation. Mi ...

  • Honeywell 1250g - page 117

    6 - 17 Stra ight 2 of 5 IA T A (tw o-b ar start/stop ) Note : Thi s symbo logy is also kn own as Ai rlin e Code 5. <Default All Straight 2 of 5 I ATA Settings> Straight 2 of 5 IA T A On/Off Straight 2 of 5 IA T A Red undancy If y ou are encou ntering errors when re ading Stra ight 2 of 5 IA T A bar code s, y ou ma y w ant to a djust the redun ...

  • Honeywell 1250g - page 118

    6 - 18 Straight 2 of 5 IA T A Me ssage Length Scan th e bar code s belo w to chang e the mes sage len gth. Ref er to Mess age Length D escription (page 6-2) f or a dditional inf ormation. Mini- mum and Ma ximum le ngths = 1 -80. Mi nimum Default = 13, Maxi mum Def ault = 15. Matrix 2 of 5 <Default All Matrix 2 of 5 Settings> Matri x 2 of 5 On ...

  • Honeywell 1250g - page 119

    6 - 19 When Chec k Char acter is se t to V a lidate and T ransm it , th e scanner on ly read s Matrix 2 of 5 bar co des printed with a c hec k charac ter , and w ill tran s- mit thi s char acter at the end of the scanned da ta. Def ault = No Chec k Char acter . Matrix 2 of 5 Redundancy If y ou are en countering erro rs when reading Matrix 2 of 5 ba ...

  • Honeywell 1250g - page 120

    6 - 20 Code 11 <Default All Code 11 Settings> Code 11 On/O ff Check Digits Required These options s et whether 1 or 2 chec k digit s are requi red with Code 11 bar co des. A uto Select Chec k Digits deter mine s the number of che ck digits based on the lengt h of the ba r code . If the bar code is 10 digits or more , 2 chec k di gits are re q ...

  • Honeywell 1250g - page 121

    6 - 21 Chec k Digit V alidation When Chec k Char acter is se t to V a lidate and T ransm it , th e scanner wil l only re ad Code 11 bar codes printed wit h the specifi ed type c hec k chara c- ter(s), an d will tr ansmit th e chara cter(s) at t he end of t he scanned data. Code 11 Redundancy If you ar e encou nter ing e rrors when re ading Code 11 ...

  • Honeywell 1250g - page 122

    6 - 22 Code 11 Messag e Length Scan th e bar code s belo w to chang e the mes sage len gth. Ref er to Mess age Length D escription (page 6-2) f or a dditional inf ormation. Mini- mum and Ma ximum leng ths = 1 -80. Min imum Default = 3, Maximum Def ault = 80. Minimum Messag e Length Maximum M essage Length ...

  • Honeywell 1250g - page 123

    6 - 23 Code 128 <Default All Code 128 Settings> Code 128 On/ Off 128 Group Separator Output If y ou wish to trans mit the g roup se parator c haracte rs “GS” (0x 1D he x) with y our Code 128 bar co de output, scan the On bar code . When Of f is scann ed, the g roup sepa rator is not output. Def aul t =Off. Code 128 Redundancy If y ou are ...

  • Honeywell 1250g - page 124

    6 - 24 128 Red undancy bar code b elow , then s can a re dundancy count be tween 0 and 10 on the Program ming Char t inside t he bac k cov er of this manu al. Then s can the Sav e bar code. Defa ult = 0. Code 128 Mess a ge Length Scan th e bar code s belo w to chang e the mes sage len gth. Ref er to Mess age Length D escription (page 6-2) f or a dd ...

  • Honeywell 1250g - page 125

    6 - 25 Concatenation T imeout When se archi ng for bar co des dur ing co ncaten ation , you ma y wi sh to set a dela y us ed to find the ne xt ba r code . Set the length (i n millisec onds) f or this dela y b y scann ing the ba r code bel ow , then sett ing the time out (from 1- 65535 m illisecon ds) b y scanning digits fro m the Program ming Chart ...

  • Honeywell 1250g - page 126

    6 - 26 ISBT 128 Prede fined Con catenatio n Sequen ces On/ Off The follo wing selectio ns allow y ou to enab le or r equire the Predefined I SBT 128 Co ncat enatio n Sequ ences. If you sc an Off , t he predefi ned conc atenation sequenc es are disab led. If y ou scan the Allo w Predefined Sequence code , then the scanner wi ll output only th e data ...

  • Honeywell 1250g - page 127

    6 - 27 Ste p 1. Scan the 1st Left Identifie r bar code, below. Ste p 2. Use t he Programming Ch art to scan 3, D (hex for “=”) . Ste p 3. Scan Sav e . Ste p 4. Scan the 2nd Left Identifie r bar code, below. Ste p 5. Use t he Programming Ch art to scan 4, 7 (hex for “G”). Ste p 6. Scan Sav e . Ste p 7. Scan the 1st Right Identifie r bar code ...

  • Honeywell 1250g - page 128

    6 - 28 If y ou scan the Require U ser-De fined Sequenc e code, th e dat a combi na- tion sp ecified in the Us er-Defined concaten ation seq uence is required t o tra nsmit the d ata. No d ata is outpu t unless the seque nce is read. Def ault = Off. Content V erification When the On bar code is scanne d, the che ck cha racter v alu es are out put al ...

  • Honeywell 1250g - page 129

    6 - 29 tion Ide ntification Number ide ntifiers, o nly the f irst ID chara cter is remo v ed from the Donation Id entificat ion Number . The second ch aracter is transmit- ted as normal data. Def ault = On . Flag Digit Con version T ype 3 fla g digits a re a part of the Don ation Iden tification Num ber in an ISBT 128 bar code . If y ou sel ect On ...

  • Honeywell 1250g - page 130

    6 - 30 GS1-128 <Default All GS1-128 Setti ngs> GS1-1 28 On/Off GS1-1 28 Applica tion Iden tifier Pa rsin g This a llow s a single G S1-128 ba r code to b e brok en into m ultipl e trans mis- sions based on the p resence of appl ication id entifiers (AI) e mbedded in the bar co de. Scan T ra nsmit Without Iden tifiers if y ou want the bar code ...

  • Honeywell 1250g - page 131

    6 - 31 128 Redun dancy ba r code bel ow , then scan a redu ndancy c ount betw een 0 and 10 on the Program ming Char t inside t he bac k cov er of this manu al. Then s can the Sav e bar code. Defa ult = 0. GS1- 128 Mess age Lengt h Scan the bar code s belo w to ch ange the mes sage len gth. Ref er to Mess age Length D escription (page 6-2) f or a dd ...

  • Honeywell 1250g - page 132

    6 - 32 Te l e p e n <Default All Telepen Sett ings> T elepen On/Off T elepen Output Usin g AIM T elepen Output, the s canner reads symbols with sta r t/stop pat - tern 1 and dec odes them as standa rd full ASC II (star t/sto p pattern 1). When Original T elepen Output is selected , the scanne r reads symbo ls with start/stop pattern 1 and dec ...

  • Honeywell 1250g - page 133

    6 - 33 T e lepen Redunda ncy bar code belo w , the n scan a redundanc y count betw een 0 an d 10 on the Programming Chart ins ide the b ack co v er of this man ual. Then scan the Save bar code . Def ault = 0. T elepen Me ssage Length Scan the bar code s belo w to ch ange the mes sage len gth. Ref er to Mess age Length D escription (page 6-2) f or a ...

  • Honeywell 1250g - page 134

    6 - 34 UPC-A Number Syste m and Chec k Digit UPC-A Number Syste m The numeric sys tem digit o f a U .P .C . symbol is normally transm itted at the beginning of the scan ned data, b ut th e can be progra mmed so it will not trans mit it. Def ault = On. UPC-A Chec k Digit This s election allow s y ou to sp ecify whet her the ch eck digit sho uld be t ...

  • Honeywell 1250g - page 135

    6 - 35 UPC-A Addenda This s election adds 2 or 5 digits to the e nd of all scanned U PC-A data. Def ault = Off f or both 2 D igit and 5 Digit Add enda. UPC-A Addenda Required When Required is scan ned, the scan ner will on ly read U PC-A bar code s that hav e adden da. Y ou must then turn on a 2 o r 5 digit a ddenda li sted on page 6 -35 . Def ault ...

  • Honeywell 1250g - page 136

    6 - 36 timeou t by scannin g the bar code below , then setting th e timeou t (from 0- 65535 m illisecon ds) b y scanning digits fro m the Program ming Chart , the n scann ing Save . Def ault = 100. Note: The Add enda Timeo ut setting is ap plied to all addend a and coupon code se arches . UPC-A Addenda Separator When th is f eature is on, there is ...

  • Honeywell 1250g - page 137

    6 - 37 If you s can th e Allo w Concatenation cod e, when the scanner sees the co upon code a nd the e xten ded coup on code i n a singl e scan, it tr ansm its both as sepa- ra te symbolo gies. Otherwise , it tr ansmits the first co upon code it reads . If y ou scan the Require C oncatenat ion code , the scanner m ust see a nd read the coupon code ...

  • Honeywell 1250g - page 138

    6 - 38 UPC-A Number System 5 Ad denda Required This s etting prog rams the scanne r to require any c ombination of a coup on code , a 2 dig it addend a, or a 5 di git adden da on UPC-A bar codes that begin with a “5. ” Th e f oll owing s etting s can be progra mmed: Require Coupo n Code/Addenda: All UPC-A ba r codes th at begin with a “5” m ...

  • Honeywell 1250g - page 139

    6 - 39 Addenda Timeout Y ou can set a time during which the scanner l ooks f or a c oupon co de. If a coupon code is not f ound with in this t ime period, the d ata can be either transm itte d or disc arded , based on the settin g you are u sing for UPC-A/ EAN- 13 with Extende d Coupon C ode or UPC-A Number System 4 Adde nda Require d . Set the l e ...

  • Honeywell 1250g - page 140

    6 - 40 UPC-E0 Expa nd UPC-E Expand e xpands the UPC-E cod e to the 12 digit, UPC -A fo r mat. Def ault = Off. UPC- E0 Number System The n umeric system digit of a UPC-A sy mbol is normally tr ansmitted at the beginn ing of sc anned dat a. When us ing UPC-E Ex pand, the unit can be prog ramm ed so it wi ll not tr ansmit i t. Def ault = On. On * Off ...

  • Honeywell 1250g - page 141

    6 - 41 UPC- E0 Number System a nd Chec k Dig it UPC-E0 Chec k Digit Chec k Dig it specif ies whethe r the chec k di git shoul d be tra nsmitted at the end of the scanned data or not. Def ault = Off . UPC-E0 Leading Zero This f eatu re allo ws the tr ansmis sion of a leading z ero (0) at th e beginn ing of sca nned data. T o prev ent tr ansmiss ion, ...

  • Honeywell 1250g - page 142

    6 - 42 UPC-E0 Addenda This s election adds 2 o r 5 digits to the e nd of all scanned U PC-E data. Def ault = Off f or both 2 D igit and 5 D igit Add enda. UPC-E0 Addenda Required When Required is scan ned, the scan ner will on ly read UP C-E bar cod es that hav e adden da. Def ault = Not Required. Addenda Timeout Y ou can set a ti me during which t ...

  • Honeywell 1250g - page 143

    6 - 43 timeou t by scannin g the bar code below , then setting th e timeout (from 0- 65535 m illisecon ds) b y scanning digits fro m the Program ming Chart , the n scann ing Save . Def ault = 100. Note: The Addenda Ti meout se tting is appl ied to all addenda and coupo n code se arch es. UPC-E0 Addenda Separator When this f eature is On , there is ...

  • Honeywell 1250g - page 144

    6 - 44 EAN /JAN-1 3 <Default All EAN/ JAN Settings> EAN/JAN-13 On/Off Con vert UP C-A to EAN-13 When UPC-A Con verted to EAN-13 i s select ed, UPC -A bar co des are con v er ted to 13 digit EAN-13 codes b y adding a z ero to the front. W hen Do not Con ve r t UPC-A is sel ected, UP C-A codes a re read as UPC-A. * On Off * Do Not Convert UPC-A ...

  • Honeywell 1250g - page 145

    6 - 45 EAN/JAN-13 Check Digit This s election allow s y ou to sp ecify whet her the ch eck digit sho uld be tra nsmitted at the end of the scan ned data o r not. Def ault = On. EAN/JAN-13 Addenda This s election adds 2 or 5 digits to the end of all sc anned EAN/J AN-13 data. Def ault = Off f or both 2 Digit and 5 D igit Adde nda. EAN/JAN-13 Addenda ...

  • Honeywell 1250g - page 146

    6 - 46 EAN-13 Beginning with 2 Addenda Require d This s etting prog rams th e scanne r to require a 2 digit addenda o nly on EAN- 13 bar codes that begin with a “2. ” The f ollo wing s ettings can be pro- grammed: Require 2 Dig it Addenda: All EAN-13 bar co des that b egin with a “2” mus t hav e a 2 digit adde ndum. The EAN-13 bar co de wit ...

  • Honeywell 1250g - page 147

    6 - 47 Def ault = Don’t Requi re 5 Digit Ad denda. EAN- 13 Be ginni ng with 3 78/379 Addenda Required This s etting prog rams th e scanne r to require any com bination of a 2 digit addend a or a 5 d igit add enda on EAN-1 3 bar co des that begin with a “378” or “37 9. ” The f ol lowing settings can be pro gr ammed: Require Ad denda: All E ...

  • Honeywell 1250g - page 148

    6 - 48 EAN- 13 Be ginn ing with 414/41 9 Addenda Required This s etting prog rams th e scanne r to require any com bination of a 2 digit addend a or a 5 digit adde nda on EAN-13 bar co des that begi n with a “414” or “41 9. ” The f ol lowing settings can be pro gr ammed: Require Ad denda: All EAN-13 bar c odes that be gin with a “414” o ...

  • Honeywell 1250g - page 149

    6 - 49 Def ault = Don’t Requi re Addenda . EAN-13 Beginning with 97 7 Addenda Required This s etting prog rams th e scanne r to require a 2 digit addenda o nly on EAN- 13 bar codes that be gin with “977. ” The f ollo wing setting s can be pro- grammed: Require 2 Dig it Addenda: All EAN-13 bar co des that b egin with “9 77” mus t hav e a 2 ...

  • Honeywell 1250g - page 150

    6 - 50 Require 5 Dig it Addenda: All EAN-13 bar codes that b egin with “9 78” mus t hav e a 5 digit adde ndum. The EAN-13 bar co de with the 5 digit addend um is the n trans mitted as a s ingle , concatena ted bar code. If a 5 digit a ddendum is not f ound within the Adde nda Time out period, the EAN- 13 bar code i s disca rded. Don’t Require ...

  • Honeywell 1250g - page 151

    6 - 51 Addenda Timeout Y ou can set a ti me during which the scanner l ooks f or an addenda. If an addend a is not f oun d within th is time period, the data c an be eith er trans- mitted or discar ded, base d on the s etting y ou are usi ng f or EAN/JAN-13 Adde nda Require d . Set the l ength (in m illiseconds ) fo r this timeou t by scann ing the ...

  • Honeywell 1250g - page 152

    6 - 52 ISBN T ranslate ISBNs a re printed on b ooks us ing the EAN-13 bar code symbolo gy . T o trans late EAN-13 Bo okland sym bols into their equiv alen t ISBN num ber f or- mat, s can the On bar code belo w . Defa ul t = Of f. Con vert ISBN to 13-Digit When tr anslati ng EAN-13 c odes to t he ISBN f ormat, yo u can con v er t the bar c ode to a ...

  • Honeywell 1250g - page 153

    6 - 53 ISSN T rans late When On is scanned, EAN-13 977 Bookland sy mbols a re transl ated into their equi va lent 8-digit ISSN n umber f ormat. For e xam ple, 97701 23456787 will be trans mitted as 0 1234560. Defa ul t = Of f. ISSN Ref ormat When Reformat On is sca nned, EAN- 13 977 Bookla nd symb ols are transl ated into th eir eq uivalent 8-digi ...

  • Honeywell 1250g - page 154

    6 - 54 EAN /JAN-8 <Default All EAN/JAN-8 Settings> EAN/JAN-8 On/Off EAN/JAN-8 Check Digit This s election allow s y ou to sp ecify whet her the ch eck digit sho uld be tra nsmitted at the end of the scan ned data o r not. Def ault = On. * On Off Off * On ...

  • Honeywell 1250g - page 155

    6 - 55 EAN/JAN-8 Addenda This s election adds 2 or 5 digits to the end of all sc anned EAN/J AN-8 data. Def ault = Off f or both 2 D igit and 5 Digit Add enda. EAN/JAN-8 Ad denda Required When Required is scanned , the scan ner will on ly read EAN/J AN-8 ba r codes that ha v e addenda. De fault = Not Required. Addenda Timeout Y ou can set a ti me d ...

  • Honeywell 1250g - page 156

    6 - 56 scann ing the ba r code bel ow , then setting the time out (from 0- 65535 mil li- secon ds) b y scanning di gits from the Programming C hart , then scanning Save . Def ault = 100 . Note: The Add enda Timeo ut setting is ap plied to all addend a and coupon code se arches . EAN/JAN-8 Addenda Separator When this f eature is On , there is a spac ...

  • Honeywell 1250g - page 157

    6 - 57 MSI <Default All MSI Settings> MSI On/O ff MSI C hec k Char acter Diff eren t types of check charac ters are us ed with MS I bar codes . Y ou can program the sc anner t o read MS I bar co des wi th T y pe 10 che c k ch arac- ters. Default = V al idat e T ype 10, but Do n’t T ransm it. When Chec k Char acter is se t to V a lidate T yp ...

  • Honeywell 1250g - page 158

    6 - 58 When Chec k Char acter is set to V alida te T ype 10/ 11, but Don’t T ransmit , the unit will only read MSI b ar codes printed with the specifi ed type c heck char acter(s), b ut w ill not tr ansmit the chec k char acter(s) wit h the sca nned data. MSI Redundancy If y ou are encounte r ing errors w hen reading MSI bar c odes , you ma y w a ...

  • Honeywell 1250g - page 159

    6 - 59 MSI Mess age Length Scan the bar code s belo w to ch ange the mes sage len gth. Ref er to Mess age Length D escription (page 6-2) f or a dditional inf ormation. Mini- mum and Ma ximum leng ths = 1 -80. Min imum Default = 3, Maximum Def ault = 80. Ples sey Code < Default All Plessey Code Settings > Plesse y C ode On/Of f Ples sey Chec k ...

  • Honeywell 1250g - page 160

    6 - 60 When Chec k Char acter is se t to V a lidate and T ransm it , th e scanner on ly read s Plesse y bar co des printed w ith a ch eck ch arac ter , and will tr ansmit this ch aracter at th e end of the sca nned data. Def ault = No Check Charac- ter. Plessey Redundancy If y ou are en countering erro rs when reading Pl essey bar codes , y ou ma y ...

  • Honeywell 1250g - page 161

    6 - 61 GS1 Da taBar O mnidirect ional < Default All GS1 DataBar Omnidir ectional Sett ings > GS1 DataBar Omnidirectional On/Off GS1 DataBar Omnidirectional Redundancy If yo u are encoun tering errors when readi ng GS1 DataBar Om nidirec tional bar cod es, y ou ma y w ant to adjust the re dundancy count. Re dundancy adjust s the n umber o f ti ...

  • Honeywell 1250g - page 162

    6 - 62 GS1 DataBar Limited < Default All GS1 DataBar Li mited Settings > GS1 DataBar Li mited On/Off GS1 DataBar Limite d Redundancy If y ou are en countering erro rs when reading GS1 D ataBar Li mited bar codes , y ou ma y w ant to adj ust the redunda ncy coun t. Redund ancy adjust s the n umber of times a bar code is de coded bef ore tr ans ...

  • Honeywell 1250g - page 163

    6 - 63 GS1 DataBar Expanded < Default All GS1 DataBar Expanded Se ttings > GS1 DataBar Ex panded On/Off GS1 DataBa r Expanded Redundancy If y ou are en countering erro rs when rea ding GS1 Da taBar Expan ded bar codes , y ou ma y want t o adjust the redunda ncy count . Redundanc y adjusts the number of times a bar co de is deco ded bef ore tr ...

  • Honeywell 1250g - page 164

    6 - 64 GS1 DataBa r Expanded Mess a ge Length Scan th e bar code s belo w to chang e the mes sage len gth. Ref er to Mess age Length D escription (page 6-2) f or a dditional inf ormation. Mini- mum and Ma ximum leng ths = 1 -80. Min imum Default = 3, Maximum Def ault = 80. T rioptic Code T r iopti c Code is used f or l abeli ng magn etic s torage m ...

  • Honeywell 1250g - page 165

    6 - 65 If EAN8 to EAN13 Con ver sion is scanne d, all EAN 8 bar code s are con v er ted to EAN13 f ormat. Def ault = GS1 Em ulation Off . P ostal Codes The fol lowing lists li near post al codes . Any c ombinat ion of lin ear postal code selec tions ca n be activ e a t a time . China P ost (Hong K ong 2 of 5) <Default All China Post ( Hong Kong ...

  • Honeywell 1250g - page 166

    6 - 66 China P ost (Hong K ong 2 of 5) On/O ff China P ost (Hong K ong 2 of 5) Redundanc y If y ou are encounte ring errors whe n reading China P ost (Hong K ong 2 of 5 ) bar codes , y ou ma y w ant to ad just the redundanc y count. Redun dancy a djusts the n umber o f times a bar code i s decode d before tra nsmis sion, which may re duce t he numb ...

  • Honeywell 1250g - page 167

    7 - 1 7 Interface K eys K eyb oar d Functi on Relati onship s The f ollo wing K e yboard Function C ode, He x/ASCI I V alue, and F ull ASCII “CTRL ”+ relationshi ps apply to al l ter min als that can be used with the s canner . Ref er to page 2-23 enab le Con trol + ASCII mo de. Function Cod e HEX/ASCII V alue Full ASCII “CTRL ” + NUL 00 @ ...

  • Honeywell 1250g - page 168

    7 - 2 The las t fiv e char acters in th e Full ASCII “CTRL ”+ column ( [ ] 6 - ), ap ply to US onl y . The f ol lowing chart indicates the equiv alents o f these fiv e c haract ers f or diff erent countries . Note: Not al l countrie s may be s upported b y your dev ice. Suppo r ted I nterface K e ys Country Codes Unit ed Stat es [ ] 6 - Bel ...

  • Honeywell 1250g - page 169

    7 - 3 CR 0D CR/Enter RETURN SO 0E Inse r t Ins Help SI 0F Escape ESC DLE 10 F11 F11 DC1 11 Home Home DC2 12 Print Prnt Scr n DC3 13 Bac k Space BACKSP A CE DC4 14 Bac k T ab LSHIFT T AB NAK 15 F12 F12 SYN 16 F 1 F1 ETB 17 F2 F2 CAN 18 F3 F3 EM 1 9 F4 F4 SUB 1A F 5 F5 ESC 1B F 6 F6 FS 1C F7 F7 GS 1D F8 F8 RS 1E F9 F9 US 1F F10 F10 DEL 7F BACKSP ACE ...

  • Honeywell 1250g - page 170

    7 - 4 ...

  • Honeywell 1250g - page 171

    8 - 1 8 Util ities T o Add a T e st Code I.D . Prefix to Al l Symbologies This se lection allows you to turn on tr ansmissio n of a Co de I.D . bef ore the decode d symbolog y . (See th e Symbol ogy Charts, beg inning o n page A-1 ) f or the sin gle char acter co de that ide ntifies e ach symbolog y .) This action fi rst clears all curren t prefix ...

  • Honeywell 1250g - page 172

    8 - 2 Te s t M e n u When yo u scan the T es t Menu On code, t hen scan a p rogr amming code in this man ual, the s canner displ ay s the co ntent of a progra mming c ode. T he pro- gr amming fu nction will s till occur , but in addition , the conte nt of that p rogram - ming c ode is outp ut to the terminal. Note : T his feat ure s hould not be us ...

  • Honeywell 1250g - page 173

    8 - 3 Configure Confi gure disp la ys the pro gram ming and configur ation da ta of the scann er . The s canner' s progr amming and conf iguratio n data is gr ouped into di ffe rent categories . Each category is disp la yed as a tree item un der the "C onfigure" tre e node in the applic ation e xplorer . When one of t hese tr ee node ...

  • Honeywell 1250g - page 174

    8 - 4 Rese tting t he F actory Def aults If y ou aren’t sure wh at progr amming options are in yo ur scann er , or y ou’v e change d some o ptions and w ant t o restore th e scanner to fa ctory defa ult set- tings , first sca n the Remo ve Custom Defaults bar co de, the n scan Ac tivate Defaults . This rese ts the sc anner to th e factory defau ...

  • Honeywell 1250g - page 175

    9 - 1 9 Serial Pr ogramming Commands The serial p rogr amming commands can be u sed in pl ace of the progr amming bar code s. Bot h the serial com mands a nd the prog ramm ing bar c odes will pro- gr am the sca nner . F or c omplete descriptions an d e xamples o f each se rial pro- gr amming c ommand, ref er to the corres ponding p rogram ming ba r ...

  • Honeywell 1250g - page 176

    9 - 2 Storag e A si ngle cha racter that s pecifie s the stor age table to which th e comm and is app lied. An exc lamation po int ( ! ) perform s the comma nd’s oper ation on the d evice’s volatile m enu confi guration ta ble. A peri od ( . ) perfor ms the com mand’s operation on t he devic e’s non-vola tile men u config uration tabl e. Us ...

  • Honeywell 1250g - page 177

    9 - 3 Responses The de vice respon ds to serial command s with one of three res ponses: ACK Indica tes a goo d comma nd whic h has bee n process ed. ENQ In dicat es an inv alid T ag or S ubTag co mmand. NAK Indica tes the com mand was g ood, but the Data field ent ry was ou t of the allo wable ra nge for this T ag and Sub Tag comb ination, e .g., a ...

  • Honeywell 1250g - page 178

    9 - 4 MAX60[ACK], DFT[ACK]. This res ponse ind icates that the de vice’ s Codabar Coding En able (CBRENA) is set to 1 , or on; the Start/Stop Char acter (SSX) is set to 0, or Don’ t T ransmit; the Ch eck C haracter (C K2) is se t to 0, or Not Required; conca tenation (CC T) is se t to 1, or En abled ; the Mi nimum Messag e Length (MIN ) is set ...

  • Honeywell 1250g - page 179

    9 - 5 The char ts on the f ollo wing pag es list the f actory def ault se ttings f or e ach of the comm ands (ind icated b y an aste risk (*) on the progra mming pa ges). ...

  • Honeywell 1250g - page 180

    9 - 6 Men u Commands Selec tion Setting * Indica tes default Serial Comm and # In dicates a num eric entry Pag e Pr oduct Default Settin gs Setti ng Custom Def aults Set Custom Def aults MNUCDF 1-6 Sav e Custom Def aults DEF AL T 1-6 Resettin g the Custom Defaults Activ ate Custom Def aults DEF AL T 1-6 Programming the Interface Plug and Pla y Code ...

  • Honeywell 1250g - page 181

    9 - 7 Plug a nd Pla y Co des: USB USB K e yboard (PC) P AP124 2-5 USB K ey board (Mac) P AP125 2-5 USB Ja panese K e yboard (PC) P AP134 2-5 USB HID P AP131 2-5 HID F allback Mode HID F allback Mode (Range 0-60 *5 minute s USBFT O 2-6 Selec tion Setting * Indica tes default Serial Comm and # Ind icat es a nu meric entry Pag e ...

  • Honeywell 1250g - page 182

    9 - 8 USB Serial Comm ands USB Serial Emula tion for Windo ws XP , Windo ws Server 2003, and later P AP130 2-6 USB Serial Emula tion for Wind ows 2000 REMIFCO;P AP130 2-6 CTS/R TS Emula tion On USBCTS1 2-6 CTS/R TS Emula tion Off* USBCTS0 2-6 AC K/NAK Mode On USBA CK1 2-7 AC K/NAK Mode Off* USBA CK0 2-7 Commu nication Timeout (Range 0-65 535) *2000 ...

  • Honeywell 1250g - page 183

    9 - 9 Plug and Pla y Code s V er if one R uby T erminal PA P R B Y 2-9 Gilbarc o T erminal P APGLB 2-9 Honeywel l Biop tic Aux Por t PA P B I O 2-10 Datalog ic Mage llan Bioptic A ux P o rt PA P M A G 2-10 NCR Bioptic A ux Po r t PA P N C R 2-11 Wincor Nix dorf T erminal PA P W N X 2-11 Wincor Nix dorf Beetle PA P B T L 2-12 Wincor Nix dorf RS232 M ...

  • Honeywell 1250g - page 184

    9 - 10 Croatia KBDCTY32 2-15 Czech KBDCTY15 2-15 Czech (Progra mmers) KBDCTY40 2-1 5 Czech (QWER TY) KBDCTY39 2-1 5 Czech (QWER TZ) KBDCTY38 2-15 Denm ar k K BDCTY 8 2-15 Dutch ( Netherlands) KBDCT Y11 2-15 Estonia KBDCTY41 2-1 5 F aer oese KBDCT Y83 2-15 Finland KB DCTY2 2-16 Fr a n c e KB D C T Y 3 2-16 Gaelic KB DCTY84 2-16 Ger many KBDCTY4 2-16 ...

  • Honeywell 1250g - page 185

    9 - 11 K yrgyz (Cyrillic) KBDCTY79 2-1 7 Latin America KBDCTY14 2-1 7 Latvia KBDCT Y42 2-17 Latvia (QWER TY) KBDCT Y43 2-17 Lithuani a KBDCTY44 2-17 Lithuani a (IBM) KBDC TY45 2-1 7 Macedo nia KBDCTY34 2-1 8 Malta KBDCTY74 2-18 Mongoli an (Cyrillic) KBDCTY86 2-18 Norwa y KBDCTY9 2-18 P oland KBDCT Y20 2-18 P olish (214) KBDCTY57 2-18 Po l is h (Pro ...

  • Honeywell 1250g - page 186

    9 - 12 Ta t a r K B D C T Y 8 5 2-19 Thailand KBDCT Y94 2-19 Tu r k e y F K B D C T Y 2 7 2-20 Tu r k e y Q K B D C T Y 2 4 2-20 Ukrainian KBDCTY76 2-20 United Kingdo m KBDCT Y7 2-20 United Stated (Dvo rak right) KBDCTY89 2-2 0 United States (Dvo rak left) KBDCTY88 2-2 0 United States (Dvor ak) KBDCTY87 2-2 0 United States (International) KBDCTY30 ...

  • Honeywell 1250g - page 187

    9 - 13 K eyboar d Conversi on * K eyboar d Con v ersion Of f KBDCNV0 2-22 Con v er t all Char acters to U pper Case KBDCNV1 2-22 Con v er t all Char acters to Lower Case KBDCNV1 2-22 K ey board Modifiers *Control + ASCII Off KBDCAS0 2-2 3 DOS Mo de Control + ASCII KBDCAS1 2-23 Windo ws Mode Control + ASCII KBDCAS2 2-23 Windo ws Mode Prefix/Suffi x ...

  • Honeywell 1250g - page 188

    9 - 14 RS- 232 Modif iers RS232 Baud Rate 300 BPS 232BAD0 2-25 600 BPS 232BAD1 2-25 1200 BPS 232BAD2 2-25 2400 BPS 232BAD3 2-25 4800 BPS 232BAD4 2-25 *9600 BP S 232BAD5 2-25 19200 BPS 232B AD6 2-25 38400 BPS 232B AD7 2-25 57600 BPS 232B AD8 2-25 115200 BPS 232BAD9 2-25 Selec tion Setting * Indica tes default Serial Comm and # In dicates a num eric ...

  • Honeywell 1250g - page 189

    9 - 15 W ord Lengt h: Data Bits , Stop Bits, and Pa r i t y 7 Data, 1 Sto p , Pa r i t y E ve n 232W RD3 2-26 7 Data, 1 Sto p , Pa r i t y N o n e 232W RD0 2-26 7 Data, 1 Sto p , Pa r i t y O d d 232W RD6 2-26 7 Data, 2 Sto p , Pa r i t y E ve n 232W RD4 2-26 7 Data, 2 Sto p , Pa r i t y N o n e 232W RD1 2-26 7 Data, 2 Sto p , Pa r i t y O d d 232W ...

  • Honeywell 1250g - page 190

    9 - 16 RS232 Handshak ing *R TS/CTS Off 232CTS0 2-28 Flow Control, No Timeout 232CT S1 2-28 Char acter- Base d Flow Co ntro l, No Timeout 232CT S7 2-28 Two-Direc tion Flow Control 232CT S2 2-28 Flow Control with Timeout 232CT S3 2-28 Char acter- Base d Flow Co ntro l with Timeout 232CT S9 2-28 RS232 Ti meout (Range 1-51 00) *1000 m s 232DEL #### 2- ...

  • Honeywell 1250g - page 191

    9 - 17 NCR A CK/NAK *NCR ACK/NAK Off NCRA CK0 2-31 NCR ACK/NAK On NCRACK1 2-31 Blo ck Check Char acter *T ransmit NCRBCC1 2-32 Don’t T ransmit NCRBCC0 2-32 NCR Prefix/Suffix NCR Prefix NCRPR2## 2-32 NCR Suffix NCRSF2## 2-32 T ransm it Prefix/ Suffix NCRBCP1 2-33 *Don’t T ransmit Prefix/Suffi x NCRBCP0 2-33 NCR NOF (Not-on- File) Erro r On NCRRA ...

  • Honeywell 1250g - page 192

    9 - 18 Beep er Pitch - Goo d Read (F requ ency) Low (1600 Hz) BEPFQ116 00 3-3 *Medi um (2350 Hz) BEPFQ 12350 3-3 High (4200 Hz) BEPFQ 14200 3-3 Beep er - T ransmit Order *Bef ore T ransm ission BEPWHN1 3-3 After T ransmis sion BEPWHN2 3-3 Beeper Pi tch - Error (F re quency) *Razz (1 00 Hz) BEPFQ 2100 3-3 Medium (2000 Hz) BE PFQ22000 3-3 High (4200 ...

  • Honeywell 1250g - page 193

    9 - 19 LED Set tings *Red LED Off LEDFN10 3-6 Green LED O ff LEDFN20 3-6 Red LED On with Good Sc an LEDFN11 3-6 *Green LED On with Good Sc an LEDFN21 3-6 Red LED On with Lase r LEDFN12 3-6 Green LED O n with Lase r LEDFN22 3-6 Red LED On when CodeGate Disabled LEDFN14 3-6 Green LED On when CodeGate Disabled LEDFN24 3-6 Red LED On when In-Stand LEDF ...

  • Honeywell 1250g - page 194

    9 - 20 In-Stand and Out-of- Stand Settings In-Stand Def aults AISDFT 3-8 Out-of-Stand Def aults AO S D FT 3-8 Presentati on Mode Out-of-Stand PA P P M 1 3-9 Presentati on Mode with CodeG ate Out- of-Stand PA P P M 2 3-9 Manua l Activ ation Mode O ff In-Stand AISMEN0 3-9 *Manu al Act ivation Mode O n In-Stand AISMEN1 3-9 Manua l Activ ation Mode O f ...

  • Honeywell 1250g - page 195

    9 - 21 In-Stand and Out-of- Stand Settings (co ntinue d) Laser Tim eout - T rigger Releas e In- Stand (Range 1 - 65525) *0 ms AISMR T### ## 3-10 Laser Tim eout - T rigger Hold O ut-of- Stand (Range 1 - 65525) *30000 ms A OSMPT##### 3-1 0 Laser Tim eout - T rigger Releas e Out- of-Stand (Range 1 - 65525) *0 ms A OS MRT##### 3-10 *CodeGate Off In- St ...

  • Honeywell 1250g - page 196

    9 - 22 In-Stand and Out-of- Stand Settings (co ntinue d) *End Object Detection After Good Rea d In-Stand AISOGD1 3-12 Do Not End Object Detection After Good Rea d Out-of- Stand A OSOGD0 3-12 *End Object Detection After Good Rea d Out-of- Stand A OSOGD1 3-12 Object D etection Laser Tim eout In- Stand (Range 1 - 65525) *5000 m s AISODT ##### 3-12 Obj ...

  • Honeywell 1250g - page 197

    9 - 23 Charac ter Activ ation Mode *Off HSTCEN0 3-1 3 On HSTCEN1 3-13 Activ ation Char acter HST ACH## 3-14 Do Not End Char acter Activa tion After Good Read HSTCGD0 3-14 *End Char acter Activ ation After Good R ead HSTCGD1 3-14 Char acter Activa tion Laser Tim eout (Range 1 - 65525) *5000 m s HSTC DT##### 3-14 Char acter Deac tivati on Mode *Off H ...

  • Honeywell 1250g - page 198

    9 - 24 Requi re Output Sequ ence Requ ired SEQ_EN 2 3-21 On/Not R equired SEQ_ EN1 3-21 *Off SEQ_EN0 3-2 1 No Read On SHWNRD1 3-21 *Off SHWNRD0 3-21 Prefix/Suffix Selections Add CR Su ffix to All Sy mbologies VSUFCR 4-3 Prefix Add Prefix PREBK2## 4-3 Clear One Prefix PRECL2 4-3 Clear All Prefix es PRECA2 4-3 Suffix Add Suffix SUFBK2## 4-4 Clea r On ...

  • Honeywell 1250g - page 199

    9 - 25 Interfun ction De la y Ran ge 0 - 1000 (5ms inc rements) DL YFNC## 4-8 Intermessag e Dela y Range 0 - 1000 (5ms inc rements) DL YMSG## 4-9 Data Formatter Selectio ns Data F ormat Edi tor *Def ault Data Fo rmat (None) DFMDF3 5-1 Enter Data F ormat DFMBK3## 5-2 Clea r One Dat a For m at DFMCL3 5-3 Clear All Data For m at s DFMCA3 5-3 Data F or ...

  • Honeywell 1250g - page 200

    9 - 26 Pr imar y/ Alte rna te Data F ormats Primar y Data For m at AL TFNM0 5-10 Data Forma t 1 AL TFNM1 5-10 Data Forma t 2 AL TFNM2 5-10 Data Forma t 3 AL TFNM3 5-10 Sing le Scan Data F ormat Change Single Sc an-Primary Data Forma t VSAF_0 5-11 Single Scan-Data Format 1 VSAF_1 5-11 Single Scan-Data Format 2 VSAF_2 5-11 Single Scan-Data Format 3 V ...

  • Honeywell 1250g - page 201

    9 - 27 Codab ar Chec k Char . * No Check Char . CBRCK20 6-4 V alidate Mo dulo 16, But Don’ t T ransmit CBRCK21 6-4 V alidate Mo dulo 16, and T ra nsmit CBRCK22 6-4 V alidate Mo dulo 7 CD , But Don’t Tr a n s m i t CBRCK23 6-4 V alidate Mo dulo 7 CD , and T rans mit CBRCK24 6-4 V alidate CLSI, But Don’ t T ran smit CBRCK25 6-4 V alidate CLSI, ...

  • Honeywell 1250g - page 202

    9 - 28 Code 39 Check Char . * No Check Char . C39CK2 0 6-8 V alidate , But Don’t Tr a n s m i t C39CK21 6-8 V alidate , and T ra nsmit C39CK22 6-8 Code 39 Redun dancy Range ( 0 - 10) *0 C39V O T## 6-8 Code 39 Me ssage Lengt h Minimum (1 - 80) *3 C39MIN## 6-8 Maximum (1 - 80) *80 C39MAX## 6-8 Code 32 Pharmaceu tical (P ARAF) *Off C 39B320 6-9 On C ...

  • Honeywell 1250g - page 203

    9 - 29 NEC 2 of 5 Def ault All N EC 2 of 5 S etti ngs N25DFT 6-12 *Off N25ENA0 6-12 On N25ENA1 6-12 NEC 2 of 5 Chec k Digit * No Check Char . N25CK20 6-13 V alidate , But Don’t Tr a n s m i t N25CK21 6-13 V alidate , and Tr a n s m i t N25CK22 6-13 NEC 2 of 5 Redun dancy Range ( 0 - 10) *0 N25V O T## 6-1 3 NEC 2 of 5 Messa ge Lengt h Minimum (1 - ...

  • Honeywell 1250g - page 204

    9 - 30 Str aight 2 of 5 IA T A Def aul t All Str aight 2 of 5 IA T A Settings A25DFT 6-17 Str aight 2 of 5 IA T A *Off A25ENA0 6-17 On A25ENA1 6-17 Str aight 2 of 5 IA T A Redun dancy Range ( 0 - 10) *0 A2 5V O T## 6-17 Str aight 2 of 5 IA T A Mess age Length Minimu m (1 - 80) *13 A25MIN## 6-1 8 Maximum (1 - 80) *15 A25MAX## 6-1 8 Matrix 2 o f 5 De ...

  • Honeywell 1250g - page 205

    9 - 31 Code 11 Chec k Digi ts Required 1 Chec k Dig it Requ ired C11CK20 6-20 *2 Check Digits Requ ired C11CK21 6-20 A uto Select Ch eck Digi ts Requ ired C11CK22 6-20 Check Digit V alidation V alidate and T ransm it One Chec k Digit C11CK23 6-21 V alidate and Tr a n s m i t Tw o C h e c k Digits C11CK24 6-21 V alidate and Tr a n s m i t A u t o S ...

  • Honeywell 1250g - page 206

    9 - 32 ISBT128 Pre defined Conc atenation Sequ ences * Donati on ID Numb er (001 ) and ABO/RhD Blood Groups (002 ) ISBPCS0 6-25 Dona tion ID Num ber (001) and Donor ID Number (019) ISBPCS1 6-25 Dona tion ID Num ber (001) and Conf iden tial Unit Exclusi on Status ISBPCS2 6-25 Product Cod e (003) and Expi ration Dat e (Fo rm 1) ISBPCS3 6-25 Product C ...

  • Honeywell 1250g - page 207

    9 - 33 ISBT 128 U ser- Defin ed Conc atenation Sequ ences 1st Left I dentifier (0 - 255) *0 ISBUL1## 6-2 7 2nd Left Identifie r (0- 255) *0 ISBUL2## 6-2 7 1st Right Identifier (0-255) *0 ISBUR1## 6-27 2nd Rig ht Identif ier (0-255) *0 ISBUR2## 6-27 ISBT 128 U ser- Defin ed Conc atenation Sequ ences On/Off *Off ISBUCE0 6-2 8 Allow User-Defined Seque ...

  • Honeywell 1250g - page 208

    9 - 34 T elepe n Def ault Al l T elepen Settings TELD FT 6-32 *Off TELENA0 6-32 On TELENA1 6-32 T elepe n Output *AIM T ele pen Out put TELOLD0 6-32 Original T e lepen Output TELO LD1 6-32 T elepe n Redundanc y R ange (0 - 1 0) *0 T EL VO T## 6-33 T elepe n Message Lengt h Minimum (1 - 80) *3 TELMIN## 6-33 Maximum (1 - 80) *80 TELMAX## 6-3 3 UPC-A ...

  • Honeywell 1250g - page 209

    9 - 35 UPC-A/EAN-13 with Extende d Coupo n Code *Off CPNENA0 6-37 Allow C oncatenati on CPNENA1 6-37 Requ ire Concat enation CPNENA2 6-37 UPC-A Number System 4 Adde nda Requi red * Don’t Require Coupon Code ARQSY40 6-37 Requ ire Co upon Code ARQSY41 6-37 UPC-A Number System 5 Adde nda Requi red * Don’t Require Coupon Code/ Addenda ARQSY50 6-38 ...

  • Honeywell 1250g - page 210

    9 - 36 UPC-E0 Expand *Off UPEEXP0 6-40 On UPEEXP1 6-40 UPC-E0 Number Sys tem *On UPEEXN1 6-40 Off UPEEXN0 6-40 UPC-E0 Chec k Digit *Off UPECKX0 6-41 On UPECKX1 6-41 UPC-E0 Leading Zero *Off UPENSX0 6-41 On UPENSX1 6-41 UPC-E0 Addend a 2 Digit Addend a On UPEAD21 6-42 *2 Digit Adde nda Off UPEAD20 6-42 5 Digit Add enda On UPEAD51 6-42 *5 Digit Adde ...

  • Honeywell 1250g - page 211

    9 - 37 EAN/ JAN-13 2 Dig it Adde nda 2 Digit Add enda On E13AD21 6-45 *2 Digit Addenda O ff E13AD20 6-45 5 Digit Add enda On E13AD51 6-45 *5 Digit Addenda O ff E13AD50 6-45 EAN/ JAN- 13 Adde nda Require d *Not Requi red E13ARQ0 6-45 Requ ired E13AR Q1 6-45 EAN- 13 Beginning with 2 Addenda Requi red * Don’t Require 2 Digit Adden da ARQSY20 6-47 Re ...

  • Honeywell 1250g - page 212

    9 - 38 EAN- 13 Beginning with 434/4 39 Adde nda Require d * Don’t Require Addenda ARQ4340 6-49 Requ ire 2 Digit Addenda ARQ4341 6-49 Requ ire 5 Digit Addenda ARQ4342 6-49 Requ ire 2 or 5 Dig it Addenda ARQ4343 6-49 EAN- 13 Beginning with 977 Adde nda Requi red * Don’t Require 2 Digit Adden da ARQ9770 6-49 Requ ire 2 Digit Addenda ARQ9771 6-49 E ...

  • Honeywell 1250g - page 213

    9 - 39 ISSN T ranslate *Off E13ISS0 6-53 On E13ISS1 6-53 Ref ormat On E13ISR1 6-53 *Ref ormat Off E13ISR0 6-53 EAN/J AN-8 Def ault All EAN/ JAN 8 Setting s EA8DFT 6-54 Off EA8ENA0 6-54 *On EA8ENA1 6-54 EAN/JAN-8 Check Digit Off EA8CKX0 6-54 *On EA8CKX1 6-54 EAN/J AN-8 Ad denda * 2 Digit Adde nda Off EA8AD20 6-5 5 2 Digit Add enda On EA8AD21 6-55 *5 ...

  • Honeywell 1250g - page 214

    9 - 40 MSI Ch eck Char acter *V alida te T ype 10, but Do n’t T ransmit MSICHK0 6-58 V alidat e T y pe 10 and Tr a n s m i t MSICHK1 6-58 V alidate 2 T ype 10 Chars, but Don’t Tr a n s m i t MSICHK2 6-58 V alidate 2 T ype 10 Chars a nd T rans mit MSICHK3 6-58 V alidate T ype 1 0 then T ype 11 Char, but Do n’t T ransmit MSICHK4 6-58 V alidate ...

  • Honeywell 1250g - page 215

    9 - 41 GS1 DataBar Omni direction al Def ault All GS1 DataBar Omnidi rectional Settings RSSDFT 6-61 Off RSSENA0 6-61 *On RSSENA1 6-61 GS1 DataBar Omni direction al Redun dancy Rang e (0 - 10) *0 RSS V O T## 6-61 GS1 D ataBar Limited Def ault All GS1 DataBar Lim ited Settings RSLDFT 6-62 Off RSLENA0 6-62 *On RSLENA1 6-62 GS1 D ataBar Li mited Redun ...

  • Honeywell 1250g - page 216

    9 - 42 GS1 Emu lation GS1-128 Emulatio n EANEMU1 6-65 GS1 DataBar Emulat ion EANEMU2 6-65 GS1 Co de Expansi on Off EANEMU3 6-65 EAN8 to EAN13 Con v ersion EANEMU4 6-65 *GS1 Emulation Off EANEMU0 6-65 P ostal Code s China P ost (Hon g K ong 2 of 5) Def ault All C hina P ost (H ong K ong 2 of 5) Settings CPCDFT 6-65 *Off CPCENA0 6-66 On CPCENA1 6-66 ...

  • Honeywell 1250g - page 217

    9 - 43 ...

  • Honeywell 1250g - page 218

    9 - 44 ...

  • Honeywell 1250g - page 219

    10 - 1 10 Pr oduct Specifications V o y a ger 1250g Scan ner Pr oduct Spe cificatio ns P arameter S pecificatio n Mechanical Height 6. 63 in. (168mm) Length 3. 22 in. (88mm) Width 2.45 in . (62mm) W eight 4.69 oz. (133 g) Electrical Input V oltage 5V + 5% Operat ing P o wer 700mW; 140 mA (t ypical) @ 5V Standb y P ow er 425mW; 85 mA (typica l) @ 5V ...

  • Honeywell 1250g - page 220

    10 - 2 Depth of Field T ypical P erf ormance Guara nteed P erfor mance Note: Resol ution at 4 mi l (0.127m m) Perfor mance m ay be im pacted by ba r code quality a nd enviro nmental cond itions. Bar code Standar d Range 5.0 mil 57 mm - 139 mm (2 .2” - 5. 5”) 7.5 mil 28 mm - 245 mm (1.1” - 9.7”) 10.4 mil 9 mm - 369 mm (0.4” - 14.5” ) 13 ...

  • Honeywell 1250g - page 221

    10 - 3 Standa rd Cable Pinouts K eyboar d W edge Serial Output 10 Pin RJ41 Mo dular Plug connects to the scanne r handle 1 Cabl e sh ield 2C a b l e s e l e c t 3 Sup ply groun d 4 Te rminal da ta 5 Te rminal cl ock 6 Key board clock 7 Supply power inp ut +5V power 8 Keybo ard data 9 10 Not e: Pin as signme nts are not comp atibl e with Ho neywel l ...

  • Honeywell 1250g - page 222

    10 - 4 Standa rd Cable Pinouts RS48 5 Output USB 10 Pin RJ41 Mo dular Plug connects to the scanne r handle 1 Ca ble shie ld 2 Ca ble se lect 3 Su pply ground 4 Trans mit data 5 Re ceive data - serial da ta to sca nner 6 7+ 5 V p o w e r 8 Trans mit Enable 9 10 Note: RS485 s ignal conv ersion is performed in the cable . Pin ass ignments are not com ...

  • Honeywell 1250g - page 223

    11 - 1 11 Maintenance Repairs Repai rs and/or u pgrad es are not to be perf ormed on t his product. These se r- vices are to be perf ormed onl y by an authoriz ed service cent er (see Custom er Support on page 12-1 ). Mainte nance Y our de vice pro vides rel iabl e and effi cient ope ration wi th a minim um of ca re. Although specifi c maintenan ce ...

  • Honeywell 1250g - page 224

    11 - 2 • Order re placement c ables from Ho neywell o r from an au thorized distributor. • When ordering a rep lacemen t cable, spe cify the cable pa rt number o f the orig inal interfac e cable. Rep lacing an Interfac e Cabl e 1. Turn the po wer to the ho st system O FF. 2. Disconnec t the sca nner’s cabl e from the termina l or co mputer. 3 ...

  • Honeywell 1250g - page 225

    11 - 3 • You ne ed to program a suffi x. Programmi ng a suffix enabl es the scan ner to output the bar code data pl us the key you ne ed (such as “CR”) to e nter the data into your a pplicatio n. Refer to Prefix/Suffix O verview on p age 4- 1 for further i nformation. Does the scanner r ead the ba r code incorr ectly? If the s canner rea ds a ...

  • Honeywell 1250g - page 226

    11 - 4 ...

  • Honeywell 1250g - page 227

    12 - 1 12 Customer Support T ech nical Assist ance If y ou need a ssistan ce installi ng or tro uble shooting y our de vi ce, pl ease con tact us b y usin g one of th e methods be low : Knowl edge Base: www.hsmk nowledgeba se.com Our Kno wledge Ba se pro vides thous ands of i mmediate s olutions . If the Know ledge Base c annot he lp , our T echnic ...

  • Honeywell 1250g - page 228

    12 - 2 EXCEPT AS MA Y BE O THER WISE PRO VIDED BY APPLICABLE LA W , THE FOREGOING W ARRANTY IS IN LIE U OF ALL OT HER CO VENANTS OR W ARRANT IES, EITHER EXPRESSED OR I MPLIED , ORAL OR WRITTEN, INCLUDING, WITHOUT LIMIT A TION, ANY IMPLIED W ARRANTIES OF MER- CHANT ABILITY OR FITNESS FOR A P ARTICULAR PURPOSE, OR NON- INFR INGEM ENT . HII’S RESPON ...

  • Honeywell 1250g - page 229

    A - 1 A Reference Charts Symbolo gy Charts Note: “m” repres ents the AI M modifier c haracter. Re fer to Internati onal Technic al Specif ication, S ymbology Id entifiers, for AIM mod ifier chara cter deta ils. Prefix / Suffix e ntries for spe cific s ymbologies override the universa l (All Symbol ogies, 99 ) entry. Ref er to Data Editing begin ...

  • Honeywell 1250g - page 230

    A - 2 GS1 GS1 DataBar ]e m 0y 7 9 GS1 Dat aBar Li mited ] e m { 7B GS1 Data Bar Expande d ]e m }7 D GS1- 128 ]C1 I 49 2 of 5 China P ost (Hon g K ong 2 of 5) ]X0 Q 51 Interlea ve d 2 of 5 ]I m 0, 1, 3 e 65 Matr ix 2 of 5 ]X0 m 6D NEC 2 of 5 ]X0 Y 59 Str aight 2 of 5 IA T A ]R m 0, 1, 3 f 66 Str aight 2 of 5 Industrial ]S0 f 66 MSI ]M m 0, 1 g 67 Te ...

  • Honeywell 1250g - page 231

    A - 3 P ostal Symbologies ASCII Con version Chart (Code P age 1 252) In k ey board appl ications , ASCII Con trol Charac ters can be represente d in 3 dif - f erent w a ys, as show n below . The CTR L+X function is OS an d applic ation depend ent. Th e f ollowin g tab le lists some co mmonly used Mi crosoft func tional- ity . This tab le appl ies t ...

  • Honeywell 1250g - page 232

    A - 4 Lower ASCII Reference T able Note: Wind ows Code pa ge 1252 an d lower A SCII use the same ch aracters. 17 11 DC1 Hom e CT RL+ Q Quit 18 12 DC2 P r tScn CTRL+ R 19 13 DC3 B ackspace CTRL+ S Sav e 20 14 DC4 B ack T ab CTRL+ T 21 15 NAK F12 CTRL+ U 22 16 SYN F1 CTRL+ V Paste 23 17 ETB F 2 CTRL+ W 24 18 CAN F3 CTRL+ X 25 19 EM F4 CTRL+ Y 26 1A S ...

  • Honeywell 1250g - page 233

    A - 5 43 2B + 75 4B K 10 7 6B k 44 2C , 76 4C L 10 8 6C l 45 2D - 77 4D M 109 6D m 46 2E . 78 4E N 11 0 6E n 47 2F / 79 4F O 111 6F o 48 30 0 80 50 P 11 2 70 p 49 31 1 81 51 Q 11 3 71 q 50 32 2 82 52 R 11 4 72 r 51 33 3 83 53 S 11 5 73 s 52 34 4 84 54 T 11 6 74 t 53 35 5 85 55 U 11 7 75 u 54 36 6 86 56 V 11 8 76 v 55 37 7 87 57 W 11 9 77 w 56 38 8 ...

  • Honeywell 1250g - page 234

    A - 6 141 8D ì Reserve d n/a 142 8E Ž Ä Numeric Ke ypad Enter 0x1C 143 8F Å Numeric Keypad / 0x 35 144 90 ÉF 1 0x3B 145 91 ‘æ F 2 0x3C 146 92 ’Æ F 3 0x3D 147 93 “ô F 4 0x3E 148 94 ”ö F 5 0x3F 149 95 •ò F 6 0x 40 150 96 –û F 7 0x41 151 97 —ù F 8 0x42 152 98 ˜ÿ F 9 0x43 153 99 ™Ö F 1 0 0x44 154 9A šÜ F 1 1 0x57 155 9B ...

  • Honeywell 1250g - page 235

    A - 7 180 B4 ´ ┤ 181 B5 µ ╡ 182 B6 ¶ ╢ 183 B7 · ╖ 184 B8 ¸ ╕ 185 B9 ¹ ╣ 186 BA º ║ 187 BB » ╗ 188 BC ¼ ╝ 189 BD ½ ╜ 190 BE ¾ ╛ 191 BF ¿ ┐ 192 C0 À └ 193 C1 Á ┴ 194 C2 Â ┬ 195 C3 Ã ├ 196 C4 Ä ─ 197 C5 Åí 198 C6 Æ ╞ 199 C7 Ç ╟ 200 C8 È ╚ 201 C9 É ╔ 202 CA Ê ╩ 203 CB Ë ╦ 204 CC Ì ...

  • Honeywell 1250g - page 236

    A - 8 219 DB Û █ 220 DC Ü ▄ 221 DD Ý ▌ 222 DE Þ ▐ 223 DF ß ▀ 224 E0 à α 225 E1 áß 226 E2 â Γ 227 E3 ã π 228 E4 ä Σ 229 E5 å σ 230 E6 æµ 231 E7 ç τ 232 E8 è Φ 233 E9 é Θ 234 EA ê Ω 235 EB ë δ 236 EC ì ∞ 237 ED í φ 238 EE î ε 239 EF ï ∩ 240 F0 ð ≡ 241 F1 ñ± 242 F2 ò ≥ 243 F3 ó ≤ 244 F4 ô ? ...

  • Honeywell 1250g - page 237

    A - 9 ISO 2022/ISO 646 Char acte r Repla cements Code pages de fine the mapp ing of ch aracter c odes to charact ers. If the data rece ived do es not disp la y with the pro per chara cters, it ma y be because th e bar code b eing sca nned wa s created using a code pag e that is diff ere nt from the one the hos t progr am is e xpecti ng. If this is ...

  • Honeywell 1250g - page 238

    A - 1 0 Danmark ISO/IE C 646-08 8 88 Norway ISO/IEC 646-60 9 94 Italy ISO/IEC 646 -15 5 85 Portugal ISO/IEC 646-16 1 3 92 Spain ISO/IEC 646-17 10 90 Spain ISO/IEC 646-85 51 91 Code P age Selec tion Method /Country Stand ar d Keyb oard Country Honeywell Code P age Opti on ...

  • Honeywell 1250g - page 239

    A - 11 Dec 35 36 64 91 92 93 94 96 123 124 125 12 6 Hex 23 24 40 5B 5C 5D 5E 60 7B 7C 7D 7E US 0 1 # $ @ [ ] ^ ` { | } ~ CA 54 95 # $ à â ç ê î ô é ù è û CA 18 96 # $ à â ç ê É ô é ù è û JP 28 98 # $ @ [ ¥ ] ^ ` { | } ⎯ CN 92 99 # ¥ @ [ ] ^ ` { | } ⎯ GB 7 87 £ $ @ [ ] ^ ` { | } ˜ FR 3 83 £ $ à ° ç § ^ µ é ù ...

  • Honeywell 1250g - page 240

    A - 1 2 Unicod e Ke y Maps 6E 70 71 72 73 74 75 76 77 78 79 7 A 7B 7C 7D 7E 4B 50 55 4C 51 56 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0F 10 1 1 12 1 3 14 15 16 17 1 8 19 1A 1B 1C 1D 1E 2C 1F 20 21 22 23 24 25 26 27 28 29 2B 39 2E 2F 30 31 32 33 34 35 36 37 53 4F 54 59 3A 3B 3C 3E 3F 38 40 3D 5A 5F 64 5B 60 65 5C 61 66 5D 62 67 63 68 69 6A 6C 104 Key ...

  • Honeywell 1250g - page 241

    ...

  • Honeywell 1250g - page 242

    Sample Symbols UPC-A 0 1234 56 7890 Interlea ved 2 of 5 Code 128 EAN-13 Code 39 Codabar 123456 7890 Code 12 8 9 780330 290951 BC321 A135 79B Code 93 123456-9 $ Straight 2 of 5 Industrial 123456 ...

  • Honeywell 1250g - page 243

    Sample Symbols 6543210 GS1 DataBar (01)00 123456789 012 Matrix 2 of 5 ...

  • Honeywell 1250g - page 244

    Pr ogramming Char t 1 0 2 3 6 7 5 4 8 9 ...

  • Honeywell 1250g - page 245

    Pr ogramming Char t Note: If you make an error while scann ing the letters or digits (befor e scanning Save), sc an Discar d, scan the c orrect lett ers or digits , and Save again . A C B F E D Save Discard Reset ...

  • Honeywell 1250g - page 246

    Honeywell Sca nning & Mobility 9680 Old Bailes Roa d Fort Mill, SC 29707 VG12 50-UG Re v D 9/13 ...

Manufacturer Honeywell Category Scanner

Documents that we receive from a manufacturer of a Honeywell 1250g can be divided into several groups. They are, among others:
- Honeywell technical drawings
- 1250g manuals
- Honeywell product data sheets
- information booklets
- or energy labels Honeywell 1250g
All of them are important, but the most important information from the point of view of use of the device are in the user manual Honeywell 1250g.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Honeywell 1250g, service manual, brief instructions and user manuals Honeywell 1250g. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Honeywell 1250g.

Similar manuals

A complete manual for the device Honeywell 1250g, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Honeywell 1250g by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Honeywell 1250g.

A complete Honeywell manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Honeywell 1250g - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Honeywell 1250g, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Honeywell 1250g, that we can find in the current document
3. Tips how to use the basic functions of the device Honeywell 1250g - which should help us in our first steps of using Honeywell 1250g
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Honeywell 1250g
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Honeywell 1250g in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Honeywell 1250g?

Use the form below

If you did not solve your problem by using a manual Honeywell 1250g, ask a question using the form below. If a user had a similar problem with Honeywell 1250g it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)