Manual Siemens 6AU1900-1AB32-0BA0

86 pages 1.69 mb
Download

Go to site of 86

Summary
  • Siemens 6AU1900-1AB32-0BA0 - page 1

    Preface Description 1 Installing the Software 2 Configuring 3 Functions 4 SIMOTION CamTool Configuration Manual 12.2004 6AU1900-1AB32-0BA0 ...

  • Siemens 6AU1900-1AB32-0BA0 - page 2

    Safety Guidelines This manual contains notices y ou have to ob serve in order to en sur e your personal safety, as well as to prevent damage to property. The notices r eferring to your perso nal safe ty are highlighted in the manual by a sa fety alert symbol, notices referring to pr operty damage only hav e no safet y alert symbol. These n otices s ...

  • Siemens 6AU1900-1AB32-0BA0 - page 3

    CamTool Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 iii Preface Contents of manual The accompanying manual describes the SIMOTION CamTool option package. The document is part of the SIMO TION Engineering System docum entation package with order number: 6AU1900-1 AB32-0BA0, Edition 12.2004 Scope The accompanying manual applies to SIMOTION SCOU ...

  • Siemens 6AU1900-1AB32-0BA0 - page 4

    Preface CamTool iv Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 SIMOTION documentation An overview of the SIMOTION docum entation is provided in a sepa rate list of references. The list of references is suppli ed on the "SIMOTION SCOUT" CD a nd is included in each print copy order of the documentation pa ckage. The list of references ...

  • Siemens 6AU1900-1AB32-0BA0 - page 5

    Preface CamTool Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 v Additional support We also offer introductory course s to help you familiarize your self with SIMOTION. Please contact your region al training center or our m ain traini ng center at D-90027 Nuremberg/Germany, phon e +49 (911) 895 3202. Siemens Internet address The latest informati ...

  • Siemens 6AU1900-1AB32-0BA0 - page 6

    ...

  • Siemens 6AU1900-1AB32-0BA0 - page 7

    CamTool Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 vii Table of contents Preface ....................................................... ............................................................... ................................ iii 1 Description.................................................. ......................................... ...

  • Siemens 6AU1900-1AB32-0BA0 - page 8

    Table of contents CamTool viii Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 4.4 Strai ght line .............................................. ............................................................... ................... 4-7 4.4.1 Definition straight line ................................. .................................................. ...

  • Siemens 6AU1900-1AB32-0BA0 - page 9

    Table of contents CamTool Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 ix Table 4-1 Parameters in the Type tab (Inter polation Curve Properties wind ow) ..................................... 4-26 Table 4-2 Parameters in the Parameters t ab (Interpolation Curve Propertie s window) .......................... 4-27 Table 4-3 Parameters in the Type ...

  • Siemens 6AU1900-1AB32-0BA0 - page 10

    ...

  • Siemens 6AU1900-1AB32-0BA0 - page 11

    CamTool Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 1-1 Description 1 Introduction The graphical user interface in SI MOTION CamTool allows yo u to create, edit and optimize cams. SIMOTION CamTool is fully integr ated in SIMOTION SCOUT. This al lows you to also us e in SIMOTION CamTool information conf igured in SIMOTION SCOUT (e.g. axis sett ...

  • Siemens 6AU1900-1AB32-0BA0 - page 12

    ...

  • Siemens 6AU1900-1AB32-0BA0 - page 13

    CamTool Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 2-1 Installing the Software 2 2.1 Installing SIMOTION CamTool Introduction SIMOTION CamTool is an option package for SIMOTION SCOUT. SIMOTION SCOUT must have been in stalled on the system on which you want to install SIMOTION CamTool. For further in formation, refer to the system prerequisit ...

  • Siemens 6AU1900-1AB32-0BA0 - page 14

    Installing the Software 2.2 Deinstalling SIMOTION CamTool CamTool 2-2 Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 Installing SIMOTION CamTool To install SIMOTION CamTool: 1. Insert the CD with installation software into the CD-ROM dri ve. 2. Start Windows Explorer and se lect the CD-ROM drive. 3. Open the CamToolDisk1 directory. 4. D ouble-c ...

  • Siemens 6AU1900-1AB32-0BA0 - page 15

    CamTool Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 3-1 Configuring 3 3.1 Content Overview This chapter describe s how you work with SIMOTION CamTool. You learn how • to customize the display of the working area • to edit a cam with CamTool • to save a cam • to customize the display of the cam • to download a cam to a SIMOTION devi ...

  • Siemens 6AU1900-1AB32-0BA0 - page 16

    Configuring 3.2 Customizing the Working Area Display CamTool 3-2 Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 3.2 Customizing the Working Area Display 3.2.1 Changing the representat ion using the toolbar Introduction You can show or hide the scaled curve, the V diagra m (velocity diagram), the A diagram (acceleration diagram) and the J diagra ...

  • Siemens 6AU1900-1AB32-0BA0 - page 17

    Configuring 3.2 Customizing the Working Area Displ ay CamTool Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 3-3 Symbol Explanation / instructions With this icon, you can activate or deactivate the zoom tool. Y ou can als o deactivate the zoom tool using the ESC key. You can perform various functions with the activated zoom t ool. The function i ...

  • Siemens 6AU1900-1AB32-0BA0 - page 18

    Configuring 3.2 Customizing the Working Area Display CamTool 3-4 Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 3.2.2 Maximizing working area Maximizing the working area To set the largest possible work ing area for SIMOTION CamTool: 1. In the View menu, click Maximized working area . Detail view and project navigator are closed. 2. Maximize the ...

  • Siemens 6AU1900-1AB32-0BA0 - page 19

    Configuring 3.3 Editing a Cam with CamTool CamTool Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 3-5 3.3 Editing a Cam with CamTool 3.3.1 Content Overview With SIMOTION CamTool, you can edit a cam that is inserted in a SCOUT project. You can use the following method s to insert and edit a cam. You can • add a cam to a SCOUT project using SIMO ...

  • Siemens 6AU1900-1AB32-0BA0 - page 20

    Configuring 3.3 Editing a Cam with CamTool CamTool 3-6 Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 Inserting a cam in a SCOUT project To insert a cam in a SCOUT project: 1. In the project navigator, find the SIMOTION device under whi ch you want to insert a new cam. 2. Open the Cams folder and double-cli ck Insert cam with CamTool . Figure 3- ...

  • Siemens 6AU1900-1AB32-0BA0 - page 21

    Configuring 3.3 Editing a Cam with CamTool CamTool Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 3-7 3. The Insert Cam window appears. Under Name , enter a unique name for the cam (all the cams existing in the project are displaye d under Existing cams ). Figure 3-3 Window for inserting a cam 4. Click OK . A window appears in the working area o ...

  • Siemens 6AU1900-1AB32-0BA0 - page 22

    Configuring 3.3 Editing a Cam with CamTool CamTool 3-8 Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 4. Double-click the cam. The cam is opened with SIMOTION CamToo l and displayed. Segment limits between individual cam segments are marked in th e S diagram (distan ce diagram). 6GLDJUDPGLVWDQFHGLDJUDP 6HJPHQWERXQGDU 6HJPHQW? ...

  • Siemens 6AU1900-1AB32-0BA0 - page 23

    Configuring 3.3 Editing a Cam with CamTool CamTool Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 3-9 6. Delete the cam segment by pressing th e DEL key. The cam segment is replace d by an interpolation curve (transiti on) by SIMOTION CamTool. If requir ed, fixed points are inserted in the curve to maintai n the corner points of the orig inal cu ...

  • Siemens 6AU1900-1AB32-0BA0 - page 24

    Configuring 3.3 Editing a Cam with CamTool CamTool 3-10 Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 3.3.4 Import cam from text file Introduction You can re-import a cam exp ort ed as text file from SIMOTION Cam Tool back into CamTool (e.g. to re-import a cam edited in an external program). Notice The cam representation in the te xt file must ...

  • Siemens 6AU1900-1AB32-0BA0 - page 25

    Configuring 3.3 Editing a Cam with CamTool CamTool Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 3-11 2. Click a diagram to show the Cam menu. 6HJPHQWERXQGDU 6HJPHQWERXQGDU )L[HGSRLQW ,QWHUSRODWLRQFXUYHWUDQVLWLRQ 6GLDJUDPGLVWDQFHGLDJUDP 9GLDJUDPYHORFLWGLDJUDP $GLDJUDPDFFHOHUDWLRQ ...

  • Siemens 6AU1900-1AB32-0BA0 - page 26

    Configuring 3.3 Editing a Cam with CamTool CamTool 3-12 Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 Edit imported cam To edit a cam imported into SIMOTION CamTool: 1. The cam imported from a text file is displayed in SIMOTION C amTool. Segment limits between individual cam segments are m arked in the S diagram (di stance diagram). Select the ...

  • Siemens 6AU1900-1AB32-0BA0 - page 27

    Configuring 3.3 Editing a Cam with CamTool CamTool Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 3-13 Upload cam To upload a cam from a SIMOTION device: 1. Click the menu Project > Connect to target system . The system changes to ONLINE status. 6GLDJUDPGLVWDQFHGLDJUDP 6HJPHQWERXQGDU 6HJPHQWERXQGDU 9GLDJUDPYHOR ...

  • Siemens 6AU1900-1AB32-0BA0 - page 28

    Configuring 3.3 Editing a Cam with CamTool CamTool 3-14 Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 2. Click a diagram to show the Cam menu. 6HJPHQWERXQGDU 6HJPHQWERXQGDU )L[HGSRLQW ,QWHUSRODWLRQFXUYHWUDQVLWLRQ 6GLDJUDPGLVWDQFHGLDJUDP 9GLDJUDPYHORFLWGLDJUDP $GLDJUDPDFFHOHUDWLRQ ...

  • Siemens 6AU1900-1AB32-0BA0 - page 29

    Configuring 3.4 Save cam CamTool Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 3-15 Edit uploaded cam To edit a cam uploaded from a SIMOTION device: 1. The uploaded cam is displayed in SIMOT ION CamTool. Segment l imits between individual cam segments are mark ed in the S diagram (distance d iagram). Select the cam segment that you want to edit ...

  • Siemens 6AU1900-1AB32-0BA0 - page 30

    Configuring 3.5 Customize the display of the cam CamTool 3-16 Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 3.5 Customize the display of the cam 3.5.1 Display the cam Diagram display The S diagram (distance diagram) of the cam is always di splayed in the SIMOTION SCOUT working area. You can sho w or hi de the V diagram (velocity diag ram), the ...

  • Siemens 6AU1900-1AB32-0BA0 - page 31

    Configuring 3.5 Customize the display of the cam CamTool Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 3-17 2. Click the diagram that you w ant to show or hide under menu Cam > Diagrams . The diagram is shown or hidde n. Figure 3-10 Show/hide diagrams again 3.5.3 Change axis repr es entation parameters Requirements The cam is opened with SIM ...

  • Siemens 6AU1900-1AB32-0BA0 - page 32

    Configuring 3.5 Customize the display of the cam CamTool 3-18 Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 3. Either the window Master Properties (for the master axi s) or the window S Diagra m Properties (Slave) (for the slave axis) is displ ayed. For the master axis, chan ge the representation parameters in th e window Master Properties. Fig ...

  • Siemens 6AU1900-1AB32-0BA0 - page 33

    Configuring 3.5 Customize the display of the cam CamTool Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 3-19 Field/button Explanation/instructi ons Representation range S t a r t (Number of periods deactivate d) Specify here the Start point of the repr esentat ion range. If the Number of periods option has been activated, the system will determi ...

  • Siemens 6AU1900-1AB32-0BA0 - page 34

    Configuring 3.5 Customize the display of the cam CamTool 3-20 Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 3.5.4 Change diagram repr esentation parameters Requirements The cam is opened with SIMOTION Ca mTool. Change diagram representation parameters To change the representation param eters for the V diagram (veloci ty diagram), the A diagram ...

  • Siemens 6AU1900-1AB32-0BA0 - page 35

    Configuring 3.5 Customize the display of the cam CamTool Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 3-21 For the J diagram (jerk diag ra m), change the representation par ameters in the window J Diagram Prope rties. Figure 3-15 J Diagram Properties window Table 3-3 Parameters for the V , A or J Diagram Properties windo ws Field/button Explan ...

  • Siemens 6AU1900-1AB32-0BA0 - page 36

    Configuring 3.5 Customize the display of the cam CamTool 3-22 Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 Field/button Explanatio n/instructions Auxiliary li ne spacing (Main line spacing activated) If the main line s pacing option has be en activated, you can also activate the display of the grid lines for the a uxiliary line spacing . If yo ...

  • Siemens 6AU1900-1AB32-0BA0 - page 37

    Configuring 3.5 Customize the display of the cam CamTool Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 3-23 Table 3-4 Representati on par ameters in the diagrams Representation param eters Note Main grid line Type and color of the line can be changed. Auxiliary grid lines Type and color of the line can be changed. Auxiliary line Type, color and ...

  • Siemens 6AU1900-1AB32-0BA0 - page 38

    Configuring 3.5 Customize the display of the cam CamTool 3-24 Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 Field/button Explanatio n/instructions Color Specify the color of the line. The line is displayed in the Preview . Width Specify the thick ness of the line. The line type is displayed in th e Preview . Preview Under Preview , the line typ ...

  • Siemens 6AU1900-1AB32-0BA0 - page 39

    Configuring 3.5 Customize the display of the cam CamTool Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 3-25 2. Drag the auxiliary line to t he position at which you want to represent the auxiliary line and release the mouse button. The au xiliary line and the position w indow with the current position are displayed in the diagram. Figure 3-17 D ...

  • Siemens 6AU1900-1AB32-0BA0 - page 40

    Configuring 3.6 Download cam to SIMOTION device CamTool 3-26 Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 Moving the position window along an auxiliary line To move a position window with t he current position of the auxi liary line along the hori zontal or vertical auxiliary line: 1. Point at the position window. The mouse pointer shows the d ...

  • Siemens 6AU1900-1AB32-0BA0 - page 41

    Configuring 3.6 Download cam to SIMOTION device CamTool Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 3-27 Download cam to SIMOTION device To download a cam to a SIMOTION device: 1. Click the menu Project > Conne ct to target system. The syste m changes to ONLINE status. 2. Click a diagram to show the Cam menu. 3. Click the menu Cam > Dow ...

  • Siemens 6AU1900-1AB32-0BA0 - page 42

    ...

  • Siemens 6AU1900-1AB32-0BA0 - page 43

    CamTool Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 4-1 Functions 4 4.1 Content Overview In this chapter you learn how yo u can use SIMOTION CamTool to c reate and optimize a cam, and to make the simulati on settings. In addition, you lear n how you can use CamTool to edit a cam created with CamEd it and how you can export a cam as a text fil ...

  • Siemens 6AU1900-1AB32-0BA0 - page 44

    Functions 4.2 Structure of a cam CamTool 4-2 Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 4.2 Structure of a cam Introduction Create the cam in the S diagram (distance diagram). The curve r epresents the path-related dependency betwe en the master axi s (X-axis in the diagram) and the slave axis (Y-axis in the diagram). Structure of a cam The ...

  • Siemens 6AU1900-1AB32-0BA0 - page 45

    Functions 4.3 Fixed point CamTool Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 4-3 4.3 Fixed point 4.3.1 Fixed Point Definition Definition The cam consists of indivi dual c am segments. Under SIMOTION Cam Tool, you can use fixed points, straight lines, si ne curves, arc sine curves and interpolation points as cam segments. A fixed point is a s ...

  • Siemens 6AU1900-1AB32-0BA0 - page 46

    Functions 4.3 Fixed point CamTool 4-4 Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 The fixed point is displayed in the diagram. The position of th e fixed point shown in the tooltip. Figure 4-2 Insert fixed point Notice Once the function Cam > Insert > Fixed point is activated, you can ins ert fixed points in the S diagram (distance diag ...

  • Siemens 6AU1900-1AB32-0BA0 - page 47

    Functions 4.3 Fixed point CamTool Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 4-5 4.3.3 Change fixe d point position Requirements The cam is opened with SIMOTION Ca mTool. Change fixed point position To change the position of a fixed point: 1. Select the fixed point in the S diagram (distance di agram). The position of the fixed point shown i ...

  • Siemens 6AU1900-1AB32-0BA0 - page 48

    Functions 4.3 Fixed point CamTool 4-6 Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 Field/button Explanatio n/instructions v = Under v =, the current velocity at the position of the fixed point is displayed. (see note below) a = (manual input activated) Under a =, the current acceleration at the position of the fix ed point is displayed. If Man ...

  • Siemens 6AU1900-1AB32-0BA0 - page 49

    Functions 4.4 Straight line CamTool Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 4-7 1. Double-click the fixed point . The Fixed Point Properties window appears. 2. In the Dynamic response tab, activate the option Manual input and enter the new acceleration. 3. Click OK . The handle in the A diagram (acceleration diagram) is shown a t the new ...

  • Siemens 6AU1900-1AB32-0BA0 - page 50

    Functions 4.4 Straight line CamTool 4-8 Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 4.4.2 Insert straight line Requirements The cam is opened with SIMOTION Ca mTool. Insert straight line To insert a straight line: 1. Click in the S diagram (distance diagram) to activate the di agram. 2. Click Straight line under menu Cam > Insert . The mou ...

  • Siemens 6AU1900-1AB32-0BA0 - page 51

    Functions 4.4 Straight line CamTool Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 4-9 Notice Once the function Cam > Insert > Straight line is ac tivated, you can insert straight lines in the S diagram (distance diagram) until • you press the ESC key, • you press the right m ouse but ton (this acti vates the selection tool in th e too ...

  • Siemens 6AU1900-1AB32-0BA0 - page 52

    Functions 4.4 Straight line CamTool 4-10 Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 4.4.4 Changing the veloci ty along a straight line Requirements The cam is opened with SIMOTION Ca mTool. Change velocity along a straight line To change the velocity alo ng a straight line: 1. The velocity along a straig h t line is represented by a line in ...

  • Siemens 6AU1900-1AB32-0BA0 - page 53

    Functions 4.5 Sine curve CamTool Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 4-11 4.4.5 Delete straight line Requirements The cam is opened with SIMOTION Ca mTool. Deleting a straight line To delete a straight line: 1. Select the straight line that you want to delete. 2. Press the DEL key. The strai ght line is deleted and the representation ...

  • Siemens 6AU1900-1AB32-0BA0 - page 54

    Functions 4.5 Sine curve CamTool 4-12 Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 The current position of the sine curve is shown in the tooltip. Figure 4-6 Insert sine curve Notice Once the function Cam > Insert > Sine is activated, you c an insert sine curves in the S diagram (distance diagram ) until • you press the ESC key, • yo ...

  • Siemens 6AU1900-1AB32-0BA0 - page 55

    Functions 4.5 Sine curve CamTool Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 4-13 4.5.2 Change sine curve position Requirements The cam is opened with SIMOTION Ca mTool. Change sine curve position To change the position of a sine curve: 1. Select the sine curve in the S diagram (distance diagram). The current position of the sine curve is sho ...

  • Siemens 6AU1900-1AB32-0BA0 - page 56

    Functions 4.5 Sine curve CamTool 4-14 Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 2. Enter the new position in the Position tab and click OK . The sine curve is shown at the new position. Figure 4-9 Position (Fx Sine Properties) tab 4.5.3 Change sine curve definition range Requirements The cam is opened with SIMOTION Ca mTool. Change sine cur ...

  • Siemens 6AU1900-1AB32-0BA0 - page 57

    Functions 4.6 Arc Sine Curve CamTool Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 4-15 4.5.4 Delete sine curve Requirements The cam is opened with SIMOTION Ca mTool. Delete sine curve To delete a sine curve: 1. Select the sine curve that you want to delete. 2. Press the DEL key. The sine cu rve is deleted and the representation of the cam adju ...

  • Siemens 6AU1900-1AB32-0BA0 - page 58

    Functions 4.6 Arc Sine Curve CamTool 4-16 Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 The current position of the arc sine curve is shown in the tool tip. Figure 4-11 Insert arc sine curve Notice Once the function Cam > Insert > Arc sine is activated, you can in s ert arc sine curves in the S diagram (distance diagram) until • you pre ...

  • Siemens 6AU1900-1AB32-0BA0 - page 59

    Functions 4.6 Arc Sine Curve CamTool Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 4-17 4.6.2 Change arc si ne curve position Requirements The cam is opened with SIMOTION Ca mTool. Change arc sine curve position To change the position of an arc sine curve: 1. Select the arc sine curve in t he S diagram (distance diagram ). The current position ...

  • Siemens 6AU1900-1AB32-0BA0 - page 60

    Functions 4.6 Arc Sine Curve CamTool 4-18 Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 2. Enter the new position and the number of interpolation point s in the Position tab and click OK. The arc sine curve is shown at the new positions. The arc sine curve is saved by the system as an interpolation point table. Figure 4-14 Position tab 4.6.3 Ch ...

  • Siemens 6AU1900-1AB32-0BA0 - page 61

    Functions 4.6 Arc Sine Curve CamTool Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 4-19 3. Move the green handles with drag&d rop to the new positions. While moving, the current value of the respective limit o f the definition range is displa yed in the tooltip. Figure 4-15 Change arc sine curve definition range 4.6.4 Delete arc sine curve ...

  • Siemens 6AU1900-1AB32-0BA0 - page 62

    Functions 4.7 Interpolation point CamTool 4-20 Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 4.7 Interpolation point 4.7.1 Interpolation Point Definition Definition The cam consists of indivi dual c am segments. Under SIMOTION Cam Tool, you can use fixed points, straight lines, si ne curves, arc sine curves and interpolation points as cam segme ...

  • Siemens 6AU1900-1AB32-0BA0 - page 63

    Functions 4.7 Interpolation point CamTool Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 4-21 The interpolation point is disp layed in the diagram. The positi on of the interpolat ion point is shown in the tooltip. Figure 4-16 Insert interpolation point Notice Once the function Cam > Insert > Interpolation point is activated, you can inser ...

  • Siemens 6AU1900-1AB32-0BA0 - page 64

    Functions 4.7 Interpolation point CamTool 4-22 Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 Changing an Interpolation Point Position To change the position of an interpolation point: 1. Select the interpolation poin t in the S diagram (distance di agram). The position of the interpolation point is shown in the tooltip. 2. Move the interpolatio ...

  • Siemens 6AU1900-1AB32-0BA0 - page 65

    Functions 4.8 Optimizing a Cam CamTool Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 4-23 4.8 Optimizing a Cam 4.8.1 Optimizing a Cam Introduction Create the cam in the S diagram (distance diagram). The curve r epresents the path-related dependency betwe en the master axi s (X-axis in the diagram) and the slave axis (Y-axis in the diagram). Str ...

  • Siemens 6AU1900-1AB32-0BA0 - page 66

    Functions 4.8 Optimizing a Cam CamTool 4-24 Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 4.8.2 Optimize transition Requirements The cam is opened with SIMOTION Ca mTool. Optimize transition To optimize a transition: 1. Right-click the transition t hat you want to optimize and sel ect Properties in the displayed context menu. Figure 4-19 Select ...

  • Siemens 6AU1900-1AB32-0BA0 - page 67

    Functions 4.8 Optimizing a Cam CamTool Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 4-25 4. Click the Limits tab to display the minimum and ma ximum values of the interpola tion curve. Notice For the slave axis, you can take over the settings of an axis a lready existing in the proje ct via the menu Cam > Simulation settings and specify the ...

  • Siemens 6AU1900-1AB32-0BA0 - page 68

    Functions 4.8 Optimizing a Cam CamTool 4-26 Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 4.8.3 Interpolation Curve properties Type You can specify the type of the interpolation curve for the tran sition here. You can set the following param eters: Table 4-1 Parameters in the Ty pe tab (Interpolation C urve Prope rties window) Field/button Expl ...

  • Siemens 6AU1900-1AB32-0BA0 - page 69

    Functions 4.8 Optimizing a Cam CamTool Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 4-27 Parameters You can specify the parameters of the interpolatio n curve for the transition here. You can set the following param eters: Table 4-2 Parameters in the Para m eters tab (Interpolation Curve Properties window) Field/button Explanation/instructi on ...

  • Siemens 6AU1900-1AB32-0BA0 - page 70

    Functions 4.8 Optimizing a Cam CamTool 4-28 Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 Limit values The limits of the interpolation curve for the transition are displayed he re. You can set the following param eters: Table 4-3 Parameters in the Ty pe tab (Interpolation C urve Prope rties window) Field/button Explanation/instructi ons Positio ...

  • Siemens 6AU1900-1AB32-0BA0 - page 71

    Functions 4.8 Optimizing a Cam CamTool Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 4-29 Field/button Explanation/instructi ons Jerk (v > 0) Min The minimum valu e is displ ayed her e as absol ute value and as percentage value dependi ng on the physical limit. If the physical limit is undersho t, the minimum value is displa yed with a red b ...

  • Siemens 6AU1900-1AB32-0BA0 - page 72

    Functions 4.9 Specify paramete rs for target device CamTool 4-30 Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 4.9 Specify parameters for target device 4.9.1 Specify parameter s for target device Via the parameters for the tar get device, you can adjust the ca m to the SIMOTION device (e.g. scale cam). Requirements The cam is opened with SIMOTI ...

  • Siemens 6AU1900-1AB32-0BA0 - page 73

    Functions 4.9 Specify paramete rs for target device CamTool Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 4-31 Notice If you specify a scaling, you can show and hide the scaled curv e via the menu Cam > Representation param eters > Di splay scaling . If the scaled curve is displayed , you cannot edit the original curve in the diagram disp ...

  • Siemens 6AU1900-1AB32-0BA0 - page 74

    Functions 4.9 Specify paramete rs for target device CamTool 4-32 Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 Field/button Explanation/instructions Cyclic relative If you select the cyclic relative executio n type, the cam will be repeated starting at the end valu e of the slave axis . The first derivati on of the cam (velocity) in the start a ...

  • Siemens 6AU1900-1AB32-0BA0 - page 75

    Functions 4.9 Specify paramete rs for target device CamTool Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 4-33 Scaling You can specify the scaling for the target device here. Notice To display the scaled curve, select men u Cam > Representation parameters > Display scaling . If the scaled curve is displayed , you cannot edit the original ...

  • Siemens 6AU1900-1AB32-0BA0 - page 76

    Functions 4.9 Specify paramete rs for target device CamTool 4-34 Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 Field/button Explanation/instructions Slave axis Basic scaling Enter the basic scaling of the slave axis here. The center of the scali ng is always the coordi nate origin. Note : Do not use any scaling values w hich are greater than 5. ...

  • Siemens 6AU1900-1AB32-0BA0 - page 77

    Functions 4.10 Specify simulation settings CamTool Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 4-35 4.10 Specify simulation settings 4.10.1 Specify simulation settings You can take over the axis setti ngs of the master and slave axe s from the axes configured in the SCOUT project or specify them independently. Requirements The cam is opened w ...

  • Siemens 6AU1900-1AB32-0BA0 - page 78

    Functions 4.10 Specify simulation settings CamTool 4-36 Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 4.10.2 Simulation settings Master tab You specify here the simulation settings for the Master tab. You can set the following param eters: Table 4-7 Parameters in the Mast er tab ( Simulation Settings win dow) Field/button Explanatio n/instructi ...

  • Siemens 6AU1900-1AB32-0BA0 - page 79

    Functions 4.10 Specify simulation settings CamTool Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 4-37 Field/button Explanatio n/instructions Master velocity for calculations (Setting (axis)) (Setting: None) Gear ratio (relative) If you acti vate this opti on, all calcula tions are based on relative values (values re lative to the master axis). ...

  • Siemens 6AU1900-1AB32-0BA0 - page 80

    Functions 4.11 Edit cam created with CamT ool with CamEdit CamTool 4-38 Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 Field/button Explanatio n/instructions Limit (Setting: None) Minimum Enter the minimum limit of the slave axis here. Maximum Enter the maximum limit of the slave axis here. Modulo values (Setting: None) (Simulation of slave axis ...

  • Siemens 6AU1900-1AB32-0BA0 - page 81

    Functions 4.13 Print cam CamTool Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 4-39 Export cam as text file To export a cam as text file: 1. Open the cam with SIMOTION CamTool. 2. Click a diagram to show the Cam menu. 3. Click the menu Cam > Export . The file selection window is displayed. 4. Under Save as , select the destination for the te ...

  • Siemens 6AU1900-1AB32-0BA0 - page 82

    ...

  • Siemens 6AU1900-1AB32-0BA0 - page 83

    CamTool Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 Index-1 Index A Arc Sine Curve Changing the definition range, 4-18 Delete, 4-19 Insert, 4-15 Reposi tioning obje cts, 4-1 7 Auxiliary line Deleting a horizontal auxiliary line, 3-26 C Cam Display horizontal auxiliary line, 3-24 Cam Cam segments, 4-2 Upload cam from SIMOTION device;SIMOTION d ...

  • Siemens 6AU1900-1AB32-0BA0 - page 84

    Index CamTool Index-2 Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 Note: master axis unit of measure, 4-36 Note: slave axis unit of measure, 4-37 Representation, 3-16 Representation parameters, 3-16 E Edit CamEdit cam with CamTool, 3-7 CamTool cam with CamEdit, 4-38 Exporting Cam as text file, 4-39 F Fixed point Definition, 4-3 Reposi tioning ...

  • Siemens 6AU1900-1AB32-0BA0 - page 85

    Index CamTool Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 Index-3 Delete, 4-11 Insert, 4-8 Reposi tioning objec ts, 4-9 System requirements, 2-1 T Target device Specifying the target device parameters, 4-30 Text file Importing a cam, 3-10 Toolbar Changing the representation usin g the toolbar, 3-2 Transition Note: Curve point of inf lexion (o ...

  • Siemens 6AU1900-1AB32-0BA0 - page 86

    Index CamTool Index-4 Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0 ...

Manufacturer Siemens Category Camera Accessories

Documents that we receive from a manufacturer of a Siemens 6AU1900-1AB32-0BA0 can be divided into several groups. They are, among others:
- Siemens technical drawings
- 6AU1900-1AB32-0BA0 manuals
- Siemens product data sheets
- information booklets
- or energy labels Siemens 6AU1900-1AB32-0BA0
All of them are important, but the most important information from the point of view of use of the device are in the user manual Siemens 6AU1900-1AB32-0BA0.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Siemens 6AU1900-1AB32-0BA0, service manual, brief instructions and user manuals Siemens 6AU1900-1AB32-0BA0. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Siemens 6AU1900-1AB32-0BA0.

A complete manual for the device Siemens 6AU1900-1AB32-0BA0, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Siemens 6AU1900-1AB32-0BA0 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Siemens 6AU1900-1AB32-0BA0.

A complete Siemens manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Siemens 6AU1900-1AB32-0BA0 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Siemens 6AU1900-1AB32-0BA0, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Siemens 6AU1900-1AB32-0BA0, that we can find in the current document
3. Tips how to use the basic functions of the device Siemens 6AU1900-1AB32-0BA0 - which should help us in our first steps of using Siemens 6AU1900-1AB32-0BA0
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Siemens 6AU1900-1AB32-0BA0
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Siemens 6AU1900-1AB32-0BA0 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Siemens 6AU1900-1AB32-0BA0?

Use the form below

If you did not solve your problem by using a manual Siemens 6AU1900-1AB32-0BA0, ask a question using the form below. If a user had a similar problem with Siemens 6AU1900-1AB32-0BA0 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)