Manual Canon GL2

163 pages 3.11 mb
Download

Go to site of 163

Summary
  • Canon GL2 - page 1

    PUB. DIM-462 PUB. DIM-462 DIGIT AL VIDEO CAMCORDER Instruction Manual CAMESCOPE ET LECTEUR VIDEO NUMERIQUES Mode d’emploi VIDEOCAMARA Y GRAB ADORA DIGIT AL Manual de Instrucciones ENGLISH FRANÇAIS ESP AÑOL Mi ni D igital Video Cassette NTSC E F Es ...

  • Canon GL2 - page 2

    Introduction 2 E W ARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NO T EXPOSE THIS PRODUCT T O RAIN OR MOISTURE. Important Usage Instructions Digital Video Camcorder , GL2 systems This device complies with P ar t 15 of the FCC Rules. Operation is subject to the f ollowing two conditions: (1) This device ma y not cause har mful interferenc ...

  • Canon GL2 - page 3

    Introduction 3 E IMPOR T ANT SAFETY INSTRUCTIONS In these saf ety instructions the word “product” ref ers to the Canon Digital Video Camcorder GL2 and all its accessories. 1. Read Instructions — All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions — The safety and operating instruct ...

  • Canon GL2 - page 4

    Introduction 4 E 15. Overloading — Do not ov erload wall outlets and e xtension cords as this can result in a risk of fire or electric shock. 16. Objects and Liquid Entr y — Nev er push objects of any kind into this product through openings as they ma y touch dangerous voltage points or shor t out par ts that could result in a fire or electric ...

  • Canon GL2 - page 5

    Introduction 5 E Operating Steps and Refer ence Guide Digital Video Camcorder GL2 Instruction Manual Preparations Recording Playback Editing Using the Memory Card Digital Video Solution Disk Instruction Manual Installing the Software Connecting the Camcorder to a Computer Downloading the Still Image to a Computer Y our camcorder is supplied with tw ...

  • Canon GL2 - page 6

    Introduction 6 E Manual Adjustments Adjusting the Exposure Manually ................ 76 Adjusting the Focus Manually .................... 79 Setting the White Balance .......................... 80 Using the AE Shift ...................................... 82 Using the Custom Preset ............................ 83 Using the Zebra Pattern ............ ...

  • Canon GL2 - page 7

    Introduction 7 E Settings of the Still Images Recorded on a Memory Card .................................. 122 Preventing Accidental Erasur e (Protect)...... 124 Marking a Still Image for Printing (Print Mark) .............................................. 125 Erasing Still Images .................................. 127 Combining Images and Recordin ...

  • Canon GL2 - page 8

    Introduction 8 E : Reference page numbers : Functions that can be operated fr om the body of the camcorder : Functions that can be operated fr om the wireless contr oller : Supplementary notes for camcor der operation ` : Operation confirmation beeps ( 39) Capital letters are used to r efer to settings displayed in the menus and buttons labeled on ...

  • Canon GL2 - page 9

    Introduction 9 E Intr oducing the GL2 The DV terminal allows high- quality transfer with virtually no deterioration in quality of images. Y ou can edit and process images by connecting the camcorder to a PC with the IEEE 1394 terminal. IEEE 1394 DV T erminal Analog Line-in Recording Connect a VCR or analog camcorder and r ecord onto a DV cassette i ...

  • Canon GL2 - page 10

    10 E Preparations AUDIO DUB. button (p. 108) AV INSERT button (p. 105) REC PAUSE button (p. 100,102) (play/pause) button (p. 87)/ Title Mix button (p. 130)/ SLIDE SHOW button (p. 121) (stop) button (p. 87)/ INDEX SCREEN button (p. 121) (rewind) button (p. 87)/ CARD – button (p. 120) (fast forward) button (p. 87)/ CARD + button (p. 120) LCD screen ...

  • Canon GL2 - page 11

    11 E Preparations Viewfinder focusing lever (p. 14) PHOTO button (p. 48, 118) Zoom controller (p. 42) TAPE/CARD switch (p. 20, 35) Cassette compartment (p. 18) Cassette compartment cover (p. 18) OPEN/EJECT switch (p. 18) Start/stop button (p. 35) S-video IN/OUT terminal (p. 95, 101, 103) MIC terminal (p. 57, 108) DC terminal u (LANC) terminal (p. 9 ...

  • Canon GL2 - page 12

    12 E Preparations Tripod socket (p. 40) POWER switch (p. 35) D.EFFECTS ON/OFF button (p. 63) D.EFFECTS SELECT button (p. 63) REC (record) SEARCH button(p. 51)/ Record review button (p. 51) FOCUS A/M button (p. 79) Focus ring (p. 79) ND FILTER ON/OFF button (p. 47) Advanced accessory shoe (p. 68, 73-75) Strap mount (p. 15) Audio level indicator (p. ...

  • Canon GL2 - page 13

    SET REW PLA Y FF ST ART /STOP PH OTO SELF TIMER MENU TV SCREEN D ATA CODE – CARD + AUDIO MONITOR REC PA USE SEARCH SELECT SLIDESHOW ZERO SET MEMORY AUDIO DUB. STOP MIX BALANCE ST -1 ST -2 ON/OFF D .EFFECTS SET ZOOM WT AV INSERT PA USE SLOW REMOTE SET +/ –/ × 2 WIRELESS CONTROLLER WL - D77 × 2 button (p. 88) START/STOP button (p. 35) MENU butt ...

  • Canon GL2 - page 14

    14 E Preparations Pr eparing the Camcorder 1. Remove the lens cap. • When you purchase the GL2, the lens cap cor d is attached to the middle of the V elcro grip belt. Open the V elcro and slide the lens cap cor d to the position as shown in the illustration. 2. Align the hood to the lens with the Canon logo facing to the left. 3. T wist it into p ...

  • Canon GL2 - page 15

    Adjusting the Grip Belt • Adjust the length of the grip belt strap so that you can operate the start/stop button and zoom control ef fectively . Attaching the Shoulder Strap • For extra security and portability , attach the shoulder strap before using the camcor der . • Pass the ends through the strap mount and adjust the length as shown. • ...

  • Canon GL2 - page 16

    16 E Preparations Powering the Camcor der Before operating your camcor der , you will need to use the power adapter to: provide power fr om a household power socket or charge a battery pack Notes: • The power adapter converts current fr om a household power socket (100–240 V AC, 50/60 Hz) to the DC current used by your camcor der . • If the a ...

  • Canon GL2 - page 17

    17 E Preparations Y our battery pack was partially charged before it left the factory . It should have enough power for you to check that your camcorder is working pr operly . However , you must charge the battery pack fully if you want it to power the camcorder for mor e than a few minutes. 1. Attach the battery pack to the power adapter . • Mak ...

  • Canon GL2 - page 18

    18 E Preparations 1. Attach a power source. 2. Slide the OPEN/EJECT button and release the cassette compartment cover . •W ait for the cassette compartment to open automatically . • The confirmation beep sounds when it is fully opened. 3. Load or unload the cassette. • Insert the cassette gently with the window facing outward. • Remove the ...

  • Canon GL2 - page 19

    19 E Preparations The cassette memory function cannot be used with this camcorder . To protect your r ecording fr om accidental erasure, slide the tab on the cassette so that it exposes the hole. (This switch position is usually labeled SA VE or ERASE OFF .) If you load this cassette and put the camcorder in r ecord pause mode ( 35), “THE T APE I ...

  • Canon GL2 - page 20

    20 E Preparations Many of the camcorder’ s advanced functions are selected fr om menus which appear in the display . There ar e 4 main menus: CAM. MENU Camera menu ( 22) VCR MENU VCR menu ( 24) C.CAM. MENU Card camera menu ( 25) C.PLA Y MENU Card play menu ( 27) 2 CAM. MENU + CAMERA T APE CAM . SET UP CSTM PRESET VCR SET UP DISP . SET UP SYSTEM C ...

  • Canon GL2 - page 21

    21 E Preparations 1. Slide the POWER switch and the T APE/CARD switch to the desired settings. 2. Press the MENU button to open the menu. • One of the main menus appears depending on the settings of the POWER switch and T APE/CARD switch. 3. Pull the SELECT dial up and down to move the arrow to the desired submenu. 4. Press the SELECT dial in . ? ...

  • Canon GL2 - page 22

    22 E Preparations CAM . SET UP CSTM PRESET VCR SET UP DISP . SET UP SYSTEM CUSTOM KEY TITLE MIX RETURN CAM . MENU SEL . SETSET MENUCLOSE 1 3 5 2 4 6 7 8 1 Camera Set Up Submenu 2 Custom Preset Submenu 3 VCR Set Up Submenu 4 Display Set Up Submenu 5 System Submenu 6 Custom Key Submenu 7 T itle Mix Submenu 8 Close Main Menu 2 CAM. MENU Set the POWER ...

  • Canon GL2 - page 23

    23 E Preparations REC MODE MIC MIC ATT AUDIO MODE PWR SAVE RETURN SP NORMAL OFF 16bit SHUT OFF VCR SET UP SEL . SETSET MENUCLOSE •••• ••••••••• ••••• •• •••• !9 @1 @3 @0 @2 @4 3 VCR Set Up Submenu !9 Recording Mode .................................... 37 @0 Microphone ................................. ...

  • Canon GL2 - page 24

    24 E Preparations TITLE SELECT CREATE TITLE RETURN TITLE MIX SEL . SETSET MENUCLOSE $5 $7 $6 7 Title Mix Submenu $5 Selecting a Title ................................... 130 $6 Creating a Title .................................... 129 $7 Return REC MODE OUTPUT CH AUDIO DUB . MIC MIC ATT AUDIO ATT AUDIO MODE AV a DV OUT SP L/R AUDIO IN NORMAL OFF OF ...

  • Canon GL2 - page 25

    25 E Preparations 2 C. CAM. MENU Set the POWER switch to and the T APE/CARD switch to . There ar e 6 submenus within the C. CAM. MENU. CARD CAMERA WL . REMOTE TALLY LAMP BEEP T. ZONE/DST D/TIME SET RETURN SYSTEM SEL . SETSET MENUCLOSE ••• •• •••••••• •• •• 1 ON ON ––– ––– . –– , –––– ––: ...

  • Canon GL2 - page 26

    26 E Preparations QUALITY IMAGES RES . FILE NOS . SHTR SOUND RETURN FINE 1488 × 1128 CONTINUOUS ON CARD SET UP SEL . SETSET MENUCLOSE ••••• • ••• •• !4 !6 !8 !5 !7 3 Card Set Up Submenu !4 Image Quality ...................................... 115 !5 Image Resolution ................................. 116 !6 File Numbers ....... ...

  • Canon GL2 - page 27

    27 E Preparations CUSTOM KEY • ZEBRA RETURN CUSTOM KEY SEL . SETSET MENUCLOSE #2 #3 6 Custom Key Submenu #2 Custom Key ........................................... 58 #3 Return COPY [ ] PRINT MARKS ALL ERASE IMAGE ERASE TITLE PROTECT TITLE ERASE FORMAT RETURN CARD OPER . SEL . SETSET MENUCLOSE q e t u w r y 1 -1 Card Operation Submenu (Single Imag ...

  • Canon GL2 - page 28

    28 E Preparations LCD BRIGHT EVF BRIGHT DISPLAYS D/TIME SEL . CUSTOM KEY CARD ACCESS RETURN DISP . SET UP SEL . SETSET MENUCLOSE •• •• •••• • •• • – + – + ON DATE & TIME ON ON !2 !4 !6 !8 !3 !5 !7 3 Display Set Up Submenu !2 LCD Brightness ...................................... 44 !3 V iewfinder Brightness .......... ...

  • Canon GL2 - page 29

    29 E Preparations Using the Wireless Contr oller/T ally Lamp The supplied wireless contr oller can operate the camcorder fr om a distance of up to 16 feet (5 m). Point it at the camcorder’ s remote sensor while you press the buttons. The tally lamp lights up to let you know that the camcorder is in range and r esponding to your commands. There ar ...

  • Canon GL2 - page 30

    30 E Preparations To prevent interfer ence from other Canon wir eless controllers being used nearby , there ar e 2 remote sensor modes and an off setting. The wir eless controller and the camcorder have to be set to the same mode in order to be compatible. To tur n the remote sensor of f: Open the menu and select SYSTEM. Then select WL.REMOTE, set ...

  • Canon GL2 - page 31

    31 E Preparations The tally lamp lets you know that the camcorder is r ecording. However , its flashing may be reflected into the lens during close-up recor ding, or when recording thr ough glass. Y ou may therefor e decide to tur n it off. TALLY LAMP•• ON SYSTEM ( 20) 1. Open the menu and select T ALL Y LAMP . 2. Select the OFF setting and clo ...

  • Canon GL2 - page 32

    32 E Preparations The date and/ time display forms part of the data code. Y ou can choose to display or hide it during playback ( 90). Set the date and time display when you first start using your camcorder . Install the backup battery before you begin ( 138). • Before you start setting the date and time, select your home time zone fr om the menu ...

  • Canon GL2 - page 33

    33 E Preparations Time zone LONDON PARIS CAIRO MOSCOW DUBAI KARACHI DACCA BANGKOK H. KONG (Hong Kong) TOKYO SYDNEY SOLOMON WELLGTN (Wellington) SAMOA HONOLU. (Honolulu) ANCHOR. (Anchorage) L.A. (Los Angeles) DENVER CHICAGO N.Y. (New York) CARACAS RIO (Rio de Janeiro) FERNAN. (Fernando de Noronha) AZORES No. Time zone No. Notes: • After you have s ...

  • Canon GL2 - page 34

    34 E Preparations 1. Press the MENU button. • The main menu appears. 2. Pull the SELECT dial up or down, select SYSTEM and press the SELECT dial in. • The SYSTEM submenu menu appears. 3. Pull the SELECT dial up or down, select D/TIME SET and press the SELECT dial in. • The year display starts to flash. 4. Pull the SELECT dial up or down to ch ...

  • Canon GL2 - page 35

    35 E Recording • Attach a power source ( 16). • Load a cassette ( 18). • Fasten the grip belt ( 15). • Attach the lens hood ( 14). • Choose the display: viewfinder ( 14) or LCD screen ( 43). • Adjust the viewfinder or the LCD screen. Y ou may also want to install the backup battery ( 138) in order to set the date and time display ( 32). ...

  • Canon GL2 - page 36

    36 E Recording As long as the POWER switch is set to CAMERA, you can use the ST ANDBY lever to tur n the camcorder on and of f. This saves battery power and prevents accidental operation of the start/stop button. Tu rn the ST ANDBY lever to LOCK or ST ANDBY to enter/leave the standby mode. The camcorder automatically turns off if you leave it in r ...

  • Canon GL2 - page 37

    37 E Recording Y ou can recor d and play back a tape in SP (standard play) and LP (long play) modes. LP extends the tape usage by 1.5 times. Y ou cannot add sound (audio dubbing) or images (A V insert) to a tape that has been recor ded in LP mode. If you plan to use either of these functions later , recor d in SP mode. To change to LP mode, open th ...

  • Canon GL2 - page 38

    38 E Recording Tu r ning the Camcorder Recor ding Displays ON/OFF Y ou can change the display by pressing the DISPLA Y/DA T A CODE button. Each time you press the DISPLA Y/DA T A CODE button, the display will change as follows: * Appears when GUIDE INFO is set to D/T DISPLA Y in the DISP . SET UP submenu (CAMERA menu). Notes: • The display become ...

  • Canon GL2 - page 39

    39 E Recording The camcorder’ s short operation confirmation beeps are indicated by ` in the illustrations. Beeps sound upon certain camcorder operations such as when you turn the camcorder on, during the self-timer countdown, right before the camcor der’ s automatic shut-off, and also upon any unusual condition of the camcorder . Beeps are not ...

  • Canon GL2 - page 40

    40 E Recording Tips for Making Better Videos For maximum stability , grip the camcorder in your right hand and keep your right elbow pressed against your body . If necessary support the camcorder with your left hand. With practice, you will be able to operate the controls by touch, without taking your eye of f the action. To prevent any unwanted mo ...

  • Canon GL2 - page 41

    41 E Recording The most important element in the scene does not necessarily have to be centered. For a mor e interesting picture, try to position your subject slightly to one side. Leave some space on the side of the frame that the subject is facing or moving towards. Do not cut off the top of the subject’ s head, and do not cut people off at the ...

  • Canon GL2 - page 42

    42 E Recording T W ZOOM WT T W Zooming This camcorder is equipped with 20 × optical zoom and 100 × digital zoom. Optical zoom and digital zoom can be operated from either the side grip, the camcor der handle or the wireless controller . • Digital zoom cannot be used in CARD CAMERA mode. Press the zoom contr ol towards W to zoom out to wide-angl ...

  • Canon GL2 - page 43

    43 E Recording Using the LCD Scr een Push the LCD panel OPEN button and open the panel by pulling it away from the camcor der . This automatically switches the LCD screen on and the viewfinder of f. When you close the LCD panel, the LCD screen automatically switches off and the viewfinder switches back on. First open out the LCD panel at a right an ...

  • Canon GL2 - page 44

    44 E Recording When you turn the LCD panel so that it faces into the opposite direction, you can allow your subject to monitor the screen, or you can monitor yourself while r ecording. • Y ou can choose the display style between reversed (LCD MIRROR ON) or not (LCD MIRROR OFF) in the menu. Y ou can adjust the brightness of the LCD screen and the ...

  • Canon GL2 - page 45

    45 E Recording Indicators that appear on the LCD screen when MIRROR is turned on: The audio level indicator will be displayed as follows: On the LCD Screen: Automatic Manual On the Viewfinder: Automatic Manual REC REC PAUSE EJECT TAPE CAMERA mode : No Card Recording to a memory card CARD CAMERA mode : Recording to a memory card CARD CAMERA mode : T ...

  • Canon GL2 - page 46

    46 E Recording W ith most camcorders, even the slightest hand movements will be noticeable during telephoto r ecor ding. However , the GL2’ s Optical Image Stabilizer allows you to obtain steady r ecordings even at high magnification. Unlike electronic image stabilizers, it causes no loss of pictur e quality . The Optical Image Stabilizer can com ...

  • Canon GL2 - page 47

    47 E Recording On bright days or when recor ding very bright scenes, despite the iris being at its smallest aperture, blurring of the image may occur . If this happens, using the ND filter should remove this pr oblem. Tu rn the ND filter on by pressing the ND FIL TER ON/OFF button. • ND is shown continuously in the display while the ND filter is ...

  • Canon GL2 - page 48

    48 E Recording Y ou can recor d still images like photographs. The camcorder recor ds the picture and sound to tape for several seconds. The exposure is automatically adjusted. Starting your shooting with a still image makes it easy to find the beginning again later with the Photo Search function ( 93). Y ou can take a still image at any time durin ...

  • Canon GL2 - page 49

    49 E Recording 2. Press the PHOTO button fully down to take the still image • The camcorder takes the image immediately , and then records the “photo” to the tape for approximately 6 seconds. During this time the camcor der also records the sound, and the display shows the still image. •A counter display appears, and counts up as the camcor ...

  • Canon GL2 - page 50

    50 E Recording The frame mode can be used when you wish to look at a video, scene by scene, free fr om field slippage (the “flicker” that normally occurs when you pause a video). The vertical resolution of the image is improved by 1.5 × . During playback, pause the video at any time if you would like to view a crystal clear still image in the ...

  • Canon GL2 - page 51

    51 E Recording Sear ching and Reviewing While Recording When the camcorder is in r ecord pause mode, you can use recor d search to play the tape forwards or backwar ds to find the point where you wish to start or restart r ecording. This is useful when you wish to add a new scene to a previously used cassette. By using r ecord search, you can ensur ...

  • Canon GL2 - page 52

    52 E Recording Using the V arious Recording Pr ograms The camcorder pr ovides you with a choice of seven recording pr ograms. They use different combinations of camcorder settings in or der to adjust the exposure and other functions to match the recor ding situation. A vailability of Functions in Each Recording Program h = Available, i = Not availa ...

  • Canon GL2 - page 53

    53 E Recording Easy Recording Auto The simplest way to use the camcorder is with the pr ogram selector set to the [ position. The camcorder will take car e of focus, exposure and other adjustments, leaving you fr ee to point and shoot. In normal recor ding conditions, set the program selector to AUTO. This is the same as the Easy Recording pr ogram ...

  • Canon GL2 - page 54

    54 E Recording Use this program to select the apertur e (iris diameter) to give you maximum control over the depth of field. Select between 10 aperture values (f/1.6, f/2.0, f/2.4, f/2.8, f/3.4, f/4.0, f/4.8, f/5.6, f/6.7, f/8.0) in T APE CAMERA mode and 9 aperture values in CARD CAMERA mode (f/2.0 to f/8.0). Shutter speed and gain are adjusted aut ...

  • Canon GL2 - page 55

    55 E Recording Manual ( 76) Sand & Snow Spotlight Select this program for total cr eative freedom when operating the camcorder . Y ou can set aperture, shutter speed and gain independently to give you exactly the exposure you r equire. Y ou can select between 30 shutter speed settings (1/8 to 1/15000), 19 aperture values (f/1.6 to f/8.0) and 4 ...

  • Canon GL2 - page 56

    Y ou can select the microphone sound to match the r ecording situation. * Only available when audio AUDIO DUB. has been set to MIC. IN. 1. Open the VCR SET UP submenu and select MIC. 2. Select the setting and close the menu. NORMAL: General recor ding. VOICE: When recor ding a person’ s voice. W. SCREEN: In windy places such as the beach or near ...

  • Canon GL2 - page 57

    57 E Recording The camcorder sets the audio r ecording level automatically when the REC LEVEL switch is set to A. However , you can manually adjust the recoding level of the built-in micr ophone or an exter nal microphone connected via the MIC terminal or advanced accessory shoe (including micr ophones connected via the optional MA-300 Microphone A ...

  • Canon GL2 - page 58

    58 E Recording 1. Open the menu and select CUSTOM KEY . 2. Select the function. 3. Close the menu. + , + , + , + PLA Y (VCR) CARD CAMERA CARD PLA Y (VCR) T APE CAMERA T APE CUSTOM KEY ( 20) Using the Custom Key Y ou can assign frequently used functions to the custom key (independently for T APE CAMERA mode, T APE PLA Y (VCR) mode, CARD CAMERA mode ...

  • Canon GL2 - page 59

    59 E Recording Y ou can add an index signal to your recor ding for easy search in VCR mode. •Y ou cannot add or erase the index signal later . •Y ou cannot use the “INDEX WRITE” button during photo nor interval timer recording. • Index Write can be operated only by the CSTM KEY . • While in recor d mode Press the “INDEX WRITE” butto ...

  • Canon GL2 - page 60

    60 E Recording Y ou can display the information on the LCD screen/viewfinder on a connected TV . Press the “TV SCREEN” button to display the information on the TV scr een. Press the button again to cancel. * Only available when AUDIO DUB. has been set to MIC. IN. Press the “MIC” button. Select the sound quality (NORMAL, VOICE, W . SCREEN) b ...

  • Canon GL2 - page 61

    61 E Recording Press the “AUDIO LEVEL” button to display the audio level indicator on the LCD scr een/viewfinder . Press the button again to cancel. • Only available when the recor ding program is set to AUTO, Tv or Av . Press the “AE SHIFT” button to display the AE SHIFT menu. Pull the SELECT dial up or down and select between –2.0 and ...

  • Canon GL2 - page 62

    62 E Recording Using Digital Ef fects Show your creativity by using the special ef fects and digital faders. These digital effects and faders can add visual appeal and greater imaging variety . Faders: Start or end scenes on a tape with a fade to or from black ( 62). Fade T rigger , Wipe*, Overlap* Effects: Add flavor to your recordings ( 65). Blac ...

  • Canon GL2 - page 63

    63 E Recording The camcorder r etains the last recorded scene as a still image before entering the r ecord pause mode. When you start recor ding, the still image gradually changes to the scene you are r ecording. Sound and image fade together . When operating faders in T APE CAMERA mode, make sure the program selector is set to Q . 1. Press the D.E ...

  • Canon GL2 - page 64

    When operating faders in T APE CAMERA mode, make sure the program selector is set to Q . 1. Press the D.EFFECTS/BARS SELECT button. • The digital effects menu appears. 2. Select FADER and pr ess the SELECT dial in. •F ADE-T , WIPE and OVERLAP settings appear . 3. Select WIPE or OVERLAP and press the D.EFFECTS/BARS SELECT button. • The menu cl ...

  • Canon GL2 - page 65

    65 E Recording Effects The image becomes black and white. The image becomes monochrome with a br ownish tint. The image becomes like a paint (solarization). Creates a symmetrical image as if ther e would be a mirror in the middle of the scr een. The image is blurred thr ough enlarging the size of some pixels. The image is shown in a series of still ...

  • Canon GL2 - page 66

    66 E Recording 1. Press the D.EFFECTS/BARS SELECT button. • The digital effects menu appears. 2. Select EFFECT and press the SELECT dial in. • The settings appear . 3. Select the effect setting and press the D.EFFECTS/BARS SELECT button. • The menu closes and the name of the selected effect flashes in the display . 4. Press the D.EFFECTS/BARS ...

  • Canon GL2 - page 67

    67 E Recording Using the Color Bars Y ou can display and recor d industry standard SMPTE color bars. 1. Press the D. EFFECTS/BARS SELECT button. • The digital effects menu appears. 2. Select COLOR BARS and press the SELECT dial in. • The menu closes and COLOR BARS flashes in the display . 3. Press the D. EFFECTS/BARS ON/OFF button. • The colo ...

  • Canon GL2 - page 68

    68 E Recording For SLR-style flash photography , attach a Canon Speedlite 220EX, 420EX or 550EX to the camcorder’ s accessory shoe. Refer also to the Speedlite instruction manual. Tu rn the camcorder’ s power off befor e attaching/detaching the Speedlite. Slide the Speedlite onto the accessory shoe and tighten the shoe lock. Attaching the Speed ...

  • Canon GL2 - page 69

    69 E Recording W ith the interval timer , you can recor d images over a selected time with a selected interval. This function is useful when shooting flowers, animals, and other natural events. Y ou can select an interval of 30 seconds, 1 minute, 5 minutes or 10 minutes, and a recor ding time of 0.5 seconds, 1 second, 1.5 seconds, or 2 seconds. Exa ...

  • Canon GL2 - page 70

    70 E Recording Press the Start/Stop button. • The camcorder r etur ns to recor d pause mode and INT T . flashes in the display . •P r ess the Start/Stop button again to restart recor ding. Set the camcorder to r ecord pause mode and set INTER V AL T to OFF in the interval menu. Note: • The remaining tape display may not appear . Ending the In ...

  • Canon GL2 - page 71

    71 E Recording This is useful when you wish to include yourself in the picture when r ecording movies or still images to tape or memory card. 1. Open the menu, select VCR SET UP and set the SELF-TIMER to ON or press the SELF TIMER button on the wir eless controller . • SELF T . appears in the display . •T o have the subject monitor recor ding, ...

  • Canon GL2 - page 72

    72 E Recording Using the DV Contr ol When another device such as a camcorder or a video r ecording device is connected to the GL2 via a DV cable, you can operate the other device (recor d and pause recording) by pr essing the start/stop button on the GL2. 1. Open the menu and select SYSTEM. 2. Select DV CONTROL, set it to ON and close the menu. Pre ...

  • Canon GL2 - page 73

    L O C K LO C K ON OFF AUTO LOCK 3 1 1 L O C K 73 E Recording Using the VL-3 Video Light (Optional) 1. Slide the V ideo Light onto the accessory shoe and tighten the shoe lock. • Insert the Video Light oriented in the direction indicated by the arr ow on the bottom until it clicks. • Be careful not to pull of f the Video Light when fastening the ...

  • Canon GL2 - page 74

    74 E Recording The high sensitive Directional Ster eo Microphone DM-50 attaches to the advanced accessory shoe for cable-free operation and is power ed by the camcorder’ s power supply . Use it when r ecor ding or dubbing audio. Refer to the DM-50 Microphone instructions for further details. Tu rn the camcorder’ s power off befor e attaching/re ...

  • Canon GL2 - page 75

    75 E Recording Using the MA-300 Micr ophone Adapter (Optional) The MA-300 Microphone Adapter enables you to input audio to the camcor der with XLR connector equipped microphones, and to convert video signals for the BNC connector . Refer to the MA-300 Microphone Adapter instructions for further details. Tu rn the camcorder of f before attaching/det ...

  • Canon GL2 - page 76

    76 E Recording 1. Set the recording pr ogram to MANUAL. 2. Press the EXP dial in. •A n arrow appears next to the shutter speed value. 3. Pull the EXP dial up or down to increase or decrease the shutter speed. •Y ou can select between 30 shutter speeds (1/8 to 1/15000) in T APE CAMERA mode and 15 shutter speeds (1/60 to 1/720) in CARD CAMERA mod ...

  • Canon GL2 - page 77

    77 E Recording ● About the Shutter Speeds Pull the EXP dial toward + for a slower shutter speed, or towar d – for a faster shutter speed. A vailable shutter speeds in T APE CAMERA mode: A vailable shutter speeds in CARD CAMERA mode: ● About the Iris Pull the EXPOSURE dial toward + for a shorter depth of field, or towar d – for a greater dep ...

  • Canon GL2 - page 78

    78 E Recording ● Exposure lock Lock the exposure at the curr ent level in order to control the brightness of the image. To lock the exposure, pr ess the EXP dial in. Press it again to r etur n to the automatically set exposure level. Notes: •Y ou cannot lock the exposure in the [ (Easy Recording) or MANUAL r ecording program. • The standard e ...

  • Canon GL2 - page 79

    79 E Recording The camcorder focuses automatically . All you have to do is point, and whatever is in the center of the display will usually be in sharp focus. If it does not seem to be focusing well, it may be because the subject is not suitable for autofocus ( 144). Also, if you attach a filter other than UV or ND, the autofocus may not work effec ...

  • Canon GL2 - page 80

    80 E Recording The camcorder’ s auto white balance system compensates for a wide range of lighting conditions. Although slight variations are unavoidable, colors will appear natural in virtually every situation. In some cases, you will get better results by setting the white balance yourself, or using one of the two preset modes: x Indoor Mode ? ...

  • Canon GL2 - page 81

    81 E Recording Setting the white balance manually will probably work better than auto white balance when shooting: Subjects with one dominant color , such as sky , sea or for est Close-ups In rapidly changing lighting conditions In places lit by certain types of fluorescent or mer cury vapor lights Notes: •T ur n the digital zoom off (if necessar ...

  • Canon GL2 - page 82

    82 E Recording By controlling the level of the automatic exposur e (AE) function, you can lighten or darken the image slightly . This allows you to compensate for backlit, overexposed scenes. 1. Set the recording pr ogram to Auto, Tv or Av . 2. Open the menu and select AE SHIFT . 3. Pull the SELECT dial up or down and select the desired level. • ...

  • Canon GL2 - page 83

    83 E Recording Using the Custom Pr eset Y ou can adjust the color gain, color phase, sharpness and setup level for more cr eative recordings. Adjust toward + for a deeper color , and toward – for a lighter color . Adjusting the Color Gain Adjust toward R for a r edder picture, and toward G for a gr eener picture. Adjusting the Color Phase Adjust ...

  • Canon GL2 - page 84

    84 E Recording 1. T ur n the program selector to Q . 2. Press the CSTM PRESET button. • The picture r eflects your preferences. Adjust toward + for a brighter pictur e, and toward – for a darker picture. Adjusting the Setup Level SETUP LEVEL• CSTM PRESET - + ( 20) Activating the Custom Preset Functions ...

  • Canon GL2 - page 85

    85 E Recording The zebra pattern is a series of diagonal stripes that appear in the viewfinder to highlight areas of overexposur e. Use it as a guide to set the aperture (iris) and shutter speed. Y ou can also select the pattern appearance level from 80, 85, 90, 95, and 100%. Using the Zebra Patter n Note: • The camcorder does not r ecord the zeb ...

  • Canon GL2 - page 86

    86 E Recording Y ou can use the Clear Scan function to recor d PC screens or other screens without black bands caused by differ ences in the field frequencies of screens. 1. Set the recording pr ogram to Tv or MANUAL. 2. Pull the EXP dial down until CS appears in the display . 3. Open the menu and select CAM. SET UP . 4. Select CLEAR SCAN and adjus ...

  • Canon GL2 - page 87

    87 E Playbac k Y ou can use the LCD screen for instant, on-the-spot playback. The camcor der also plays back the sound track via the built-in speaker ( 89). • When you play back a tape, you can also close the LCD panel with its screen side facing outwar d. • When you’re using the viewfinder to view playback, close the LCD panel. For playing b ...

  • Canon GL2 - page 88

    88 E Playbac k Frame Advance To play back frame by frame, press the +/ ae button r epeatedly during playback pause. Press and hold to play back continuous frame advance. Frame Reverse To play back in reverse frame by frame, pr ess the –/ 4a button repeatedly during playback pause. Press and hold to play back continuous frame r everse. Slow Forwar ...

  • Canon GL2 - page 89

    89 E Playbac k The camcorder has a built-in speaker and a headphone terminal. Y ou can listen to the sound during playback. Use the speaker or headphones when using the LCD screen for playback, and use headphones when using the viewfinder . The built-in speaker is monaural; use headphones for stereo sound. Adjust the speaker and headphone volume by ...

  • Canon GL2 - page 90

    90 E Playbac k D ATA CODE During T APE PLA Y (VCR) mode, the data code can be displayed or hidden while the camcorder is in play , slow or still mode. Camcorder data may be displayed as “– – –” during fast forwar d, rewind, reverse playback, forward and r everse × 2 playback. Press the DISPLA Y/DA T A CODE button. When using a cassette, ...

  • Canon GL2 - page 91

    91 E Playbac k Y ou can also choose to display the camcorder data (shutter speed and exposur e settings) in the data code. Open the menu and select DISP .SET UP . Then select DA T A CODE, set it to DA TE/TIME, CAMERA DA T A or CAM. & D/T and close the menu. DATA CODE••• DATE/TIME DISP.SET UP ( 20) JAN. 1,2002 12:00:00 AM 12:00 AM JAN. 1,2 ...

  • Canon GL2 - page 92

    92 E Playbac k The date can be displayed for 6 seconds when you start playback, or to indicate that the date or time zone of the recor ding has changed. The 6-second auto date automatically adjusts to the time zone you have selected. To turn the 6-second auto date on, open the menu and select DISP .SET UP . Select 6SEC. DA TE, set it to ON and clos ...

  • Canon GL2 - page 93

    93 E Playbac k This allows you to move quickly through still images (photo sear ch), between different days or ar eas of recor ding (date search), or index signals ( 59) recor ded anywhere on a tape (index search). 1. Press the SEARCH SELECT button to select between photo/date/index search. • PHOTO SEARCH, DA TE SEARCH or INDEX SEARCH appears for ...

  • Canon GL2 - page 94

    94 E Playbac k Use the wireless contr oller to mark a point on a tape to which you wish to return following the playback. 1. Press the ZERO SET MEMOR Y button on the wireless contr oller during playback at a point you wish to return to later . • The time code is replaced by a tape counter that is set to zer o with the  indication. •P r ess th ...

  • Canon GL2 - page 95

    95 E Playbac k Connections for Playback on a TV Scr een For higher picture quality , we recommend playing back recor dings on a TV with an S (S1) terminal. If you connect the camcorder to a TV with an S1 terminal or the Video ID-1 system, r ecordings made in the 16:9 mode for wide screen TVs will be automatically played back in wide scr een mode on ...

  • Canon GL2 - page 96

    96 E Playbac k If Y our TV (or VCR) Has Audio/V ideo Input T erminals R L AUDIO VIDEO • Connect the camcorder using the STV -250N Stereo Video Cable. Connect the white plug to the white audio terminal L (left). Connect the red plug to the r ed audio terminal R (right). Connect the yellow plug to the yellow video terminal VIDEO . • Set the TV/VI ...

  • Canon GL2 - page 97

    97 E Editing S-VIDEO VIDEO R L AUDIO Editing to a VCR 1. Find a point on your recorded cassette slightly befor e the section you wish to copy . 2. Start to play it back while you monitor the picture on the TV . 3. Start recording on the VCR as soon as the section you wish to copy appears on the screen. 4. Pause the VCR at the end of the section you ...

  • Canon GL2 - page 98

    98 E Editing The m terminal allows you to connect compatible devices such as remote contr ollers that are m LANC compatible. Some buttons on editing equipment may operate differ ently from those on the camcorder . m (LANC) terminal Notes: • m (LANC) is a trademark. It stands for Local Application Control Bus System. •W e cannot guarantee the re ...

  • Canon GL2 - page 99

    99 E Editing REW PLA Y FF REC PA USE SEARCH SELECT ZERO SET MEMORY AUDIO DUB. STOP AV INSERT PA USE SLOW + / – / × 2 / 1. Connect the camcorder and the other digital device. • Connect the Canon CV -150F DV cable (optional). 2. Prepare the other device. •T ur n on the power and load a recor ded cassette. 3. Slide the camcorder’ s POWER swit ...

  • Canon GL2 - page 100

    100 E Editing 1. Find a point on your recorded cassette slightly befor e the section you wish to copy and set it to playback pause mode. 2. Press the camcorder’ s REC P AUSE button. • The camcorder enters r ecord pause mode. 3. Start playback on the other digital device while you monitor the picture. 4. Press the e / a (play/pause) button on th ...

  • Canon GL2 - page 101

    101 E Editing Preparations 1. Connect the camcorder to the VCR, TV or another camcorder . 2. Prepare the device. (Example connecting to a VCR) • Set the TV/Video selector on the television to Video. For further details, see “Connections for Playback on a TV Screen” ( 95). •T ur n on the VCR. Load your recor ded cassette, and put the VCR in ...

  • Canon GL2 - page 102

    102 E Editing 1. Find a point on your recorded cassette slightly befor e the section you wish to copy and set it to playback pause mode. 2. Press the REC P AUSE button. • S-video and audio IN/OUT terminals work as input terminals. • The camera enters recor d pause mode. 3. Start playback on the other device or tur n on the TV to see the desired ...

  • Canon GL2 - page 103

    103 E Editing Connecting the camcorder to your VCR or 8 mm video camera allows conversion of r ecorded analog video and audio signals to digital signals in an instant. The digital signals can be output to the other equipment with a DV terminal. The camcorder’ s DV terminal works exclusively as an output terminal. • There may be cases wher e ana ...

  • Canon GL2 - page 104

    104 E Editing AV DV OUT••• OFF VCR SET UP ( 20) To turn the analog-digital converter on, open the menu and select VCR SET UP . Then select A V DV OUT , set it to ON and close the menu. Caution: • For normal use, set A V DV OUT to OFF through the menu. If it is set to ON, you cannot input digital signals through the camcor der’ s DV te ...

  • Canon GL2 - page 105

    105 E Editing Y ou can insert and replace images/audio r ecorded on the camcorder’ s tape with images/audio r ecor ded with other video equipment using analog line-in or DV terminals. Original video and audio will be replaced with the new video and audio. The video and audio of the new scene replace that of the old. The playback tape Before inser ...

  • Canon GL2 - page 106

    106 E Editing Preparations The tape in the camcorder: When using the GL2’ s A V insert function, only use to tapes recorded in SP mode with continuously r ecor ded time codes. If there ar e non-recorded portions or portions r ecorded in LP mode on the tape, recor ding will stop. The playback tape: Use only tapes without non-recor ded portions. If ...

  • Canon GL2 - page 107

    107 E Editing 1. On the VCR, locate a point 3 seconds before the scene to be inserted. Set the VCR to playback pause mode. 2. On the camcorder , pr ess PLA Y and locate the recor ding start point. Set the camcorder to playback pause mode. •Y ou can use the playback buttons on the body of the camcorder or the special playback functions on the wire ...

  • Canon GL2 - page 108

    108 E Editing OUTPUT AUDIO L R Y ou can add sound to the original sound on a pre-r ecorded tape from audio devices (AUDIO IN) or with the internal or exter nal microphone (MIC. IN). The original sound will not be erased. If there ar e non-recorded portions on the tape, or portions r ecorded in a mode other than SP mode, or with 16-bit or 12-bit 4-c ...

  • Canon GL2 - page 109

    109 E Editing 1. Open the menu and select VCR SET UP . 2. Select AUDIO DUB. 3. Select AUDIO IN or MIC. IN and close the menu. 4. Locate the point where you wish to start audio dubbing, then press the e / a button or the P AUSE button. •Y ou can use the playback buttons on the camcorder or the special playback functions on the wireless contr oller ...

  • Canon GL2 - page 110

    110 E Editing 6. Adjust the input signal level. Automatic adjustment: 1.Slide the REC LEVEL switch to A. Manual Adjustment: 1.Slide the REC LEVEL switch to M. 2.T ur n the L/R LEVEL dials to adjust the recor ding level. • Adjust it that the level slightly exceeds the 12 point. • Adjust the balance by turning the L/R LEVEL dial if necessary . ? ...

  • Canon GL2 - page 111

    111 E Editing A UDIO MONITOR MIX BALANCE ST -1 ST -2 When you play back a tape that was recor ded in 12-bit mode, you can set the audio output to stereo 1 (the original sound), ster eo 2 (any new sound, dubbed to the tape after recording), or mix the balance between the two. • Audio from the 16-bit mode only contains ster eo 1 sound and so you ca ...

  • Canon GL2 - page 112

    112 E Editing When you play back a tape whose audio has been recor ded on multiple channels, you can change the output channels of that sound. 1. Load a tape recorded with multiple-channel audio. 2. Open the menu and select VCR SET UP . Then select OUTPUT CH, set it to the desired setting and close the menu. • Refer to the following list. OUTPUT ...

  • Canon GL2 - page 113

    113 E Editing By using a DV cable and connecting the camcorder to a PC equipped with a DV terminal conforming to IEEE 1394/DV compatible capture boar d, you can transfer images taken with the camcorder to your PC. • While connected, it is recommended that you power your camcor der from a household power socket using the power adapter . •T ur n ...

  • Canon GL2 - page 114

    114 E Using a Memory Card The camcorder can r ecord, store and manage still images on 2 types of memory car ds: the SD Memory Card (supplied with the camcor der) or the MultiMediaCard (commercially available). The SD Memory Card has the pr otect switch to protect your recor dings from accidental erasure. The SD Memory Card and the MultiMediaCar d f ...

  • Canon GL2 - page 115

    Inserting and Removing the Memory Card 1. T ur n the POWER switch to OFF . • When removing the memory card, make sur e the card access indicator is off. 2. Open the memory card compartment cover in the direction of the arr ow . 3. Insert or remove the memory card. • Push the memory card all the way in. • Remove the memory card by pushing the ...

  • Canon GL2 - page 116

    The operating states of the memory card ar e shown in the center of the display . CARD ACCESS• ON DISP.SET UP ( 20) To turn the card access display of f, open the menu and select DISP .SET UP . Then select CARD ACCESS, set it to OFF and close the menu. 116 E Using a Memory Card Image Size: 1488 × 1128 pixels/640 × 480 pixels To change the image ...

  • Canon GL2 - page 117

    1 CONTINUOUS When the file numbers are set to CONTINUOUS, each image is assigned a differ ent number , avoiding duplication of numbers. If a memory card alr eady contains files, the lowest available number file will be assigned to the added file. This is convenient when you wish to manage your images on a PC. We r ecommend keeping the file numbers ...

  • Canon GL2 - page 118

    118 E Using a Memory Card CARD TAPE Y ou can recor d still images onto the memory card. • Moving pictures cannot be r ecorded onto a memory card. •M emory cards cannot r ecord audio. • When you are using an SD Memory Car d, make sure the protect switch is set to allow r ecording. Make sure a memory car d with enough memory available is insert ...

  • Canon GL2 - page 119

    119 E Using a Memory Card >>>> 50 1488 FINE Image quality ( 115) Backup battery ( 138) Remaining battery power ( 137) Number of images that can still be recorded on the memory card Image size ( 116) The indicators that appear in the display when recor ding to a memory card: See also “The indicator that appear on the LCD screen when LC ...

  • Canon GL2 - page 120

    120 E Using a Memory Card / CARD TAPE CARD SLIDE SHOW Play back and view still images recor ded on a memory card. (For details on connecting to a TV , see “Connections for Playback on a TV Screen” ( 95) • The camcorder may not be able to copy or play , etc., images recorded with a non-Canon camcorder . Do not change the data recor ded on a me ...

  • Canon GL2 - page 121

    121 E Using a Memory Card 2 Card Jump Function Y ou can jump from the curr ent image to the desired image of unadjacent image number without displaying the images one by one. The numbers shown in the upper right corner in CARD PLA Y (VCR) mode indicate the image number of the current still image and the total number of still images on the memory ca ...

  • Canon GL2 - page 122

    122 E Using a Memory Card Y ou can easily erase unwanted still images while viewing them, protect them fr om accidental erasure, or mark them for printing. (File Operation) ● Preventing Accidental Erasur e (Protect ) Select important images and protect them fr om accidental erasure. • If a memory card is formatted, however , all images, includi ...

  • Canon GL2 - page 123

    123 E Using a Memory Card 1. With an image in the display , press the SELECT dial in to open the FILE OPER. menu. • PROTECT , PRINT MARK , and IMAGE ERASE settings appear . • If you select | RETURN, the menu disappears from the display . 2. Select PROTECT and press the SELECT dial in. • The protect mark appears on the image, and the image can ...

  • Canon GL2 - page 124

    124 E Using a Memory Card REC SEARCH CARD SLIDE SHOW This section describes how to protect the still image fr om the Card Operation submenu when displaying an index screen in CARD PLA Y (VCR) mode (including the way to cancel the setting). Y ou can also protect a still image thr ough the File Operation menu ( 123). PROTECT CARD OPER. ( 20) Make sur ...

  • Canon GL2 - page 125

    125 E Using a Memory Card This section describes how to mark a still image for printing from Car d Operation submenu in CARD PLA Y (VCR) mode (including the way to cancel the setting). – When displaying an index screen, you can mark the still image for printing. – When playing back a single image, you can erase all print marks. Y ou can also ma ...

  • Canon GL2 - page 126

    126 E Using a Memory Card Make sure a memory car d that has images recorded on it has been inserted into the camcor der . 1. With a still image in the display , open the menu and select CARD OPER. 2. Select PRINT MARKS ALL ERASE. • ERASE ALL PRINT MARKS ? YES NO appears in the display . 3. Select YES. • The print mark disappears from the image. ...

  • Canon GL2 - page 127

    127 E Using a Memory Card REC SEARCH CARD SLIDE SHOW This section describes how to erase still images from the Car d Operation submenu when playing back a single image in CARD PLA Y (VCR) mode. Y ou can also erase a still image through the File Operation menu ( 123). Make sure a memory car d that has images recorded on it is inserted into the camco ...

  • Canon GL2 - page 128

    128 E Using a Memory Card 1. Open the menu and select CARD OPER. 2. Select IMAGE ERASE. • CANCEL, SINGLE and ALL settings appear . •T o cancel erasing, select CANCEL and close the menu. 3. Select ALL. • ERASE ALL IMAGES? [EXCEPT FOR IMAGES] NO YES appears in the display . 4. Select YES. • All images in the folder of the displayed image exce ...

  • Canon GL2 - page 129

    129 E Using a Memory Card Combine a title image recor ded on a memory card with camcorder r ecordings. Y ou can change the color of a title and adjust the mix level. • Speedlite and video light cannot be used when creating a title. 1. Insert a memory card into the camcorder . 2. Slide the POWER switch to CAMERA and the T APE/CARD switch to T APE. ...

  • Canon GL2 - page 130

    130 E Using a Memory Card 1. Slide the POWER switch to CAMERA and the T APE/CARD switch to T APE. 2. Open the menu and select TITLE MIX. • The title mix menu appears. 3. Select TITLE SELECT . • Up to 6 titles images are displayed. 4. Select the title you wish to combine. 5. Press the SELECT dial in. •Y ou return to the title mix menu. 1. ...

  • Canon GL2 - page 131

    131 E Using a Memory Card 1. Open the menu and select CARD OPER. 2. Select TITLE ERASE and press the SELECT dial in. • The title erase index screen appears. 3. Select the title image you wish to erase and press the SELECT dial in. • Check the title image on the index screen when selecting. • Erase this title? NO YES appears and the title im ...

  • Canon GL2 - page 132

    132 E Using a Memory Card / Make sure a memory car d that has images recorded on it and a cassette that has enough r ecor dable space have been inserted into the camcorder . 1. Locate the point on the cassette where you wish to start copying and set it to stop. 2. Select the first image you wish to copy by using the CARD +/– buttons. • Still im ...

  • Canon GL2 - page 133

    133 E Using a Memory Card Format new memory cards if you get the message CARD ERROR, or to permanently and quickly erase all still images on a memory card, including pr otected images. The SD Memory Card supplied with this camcor der has already been formatted for you. • Be cautious when formatting recor ded memory cards. All images will be perma ...

  • Canon GL2 - page 134

    134 E Using a Memory Card Connecting to a PC Using a USB Cable Y ou can download still images from a memory car d to a PC connected to the camcorder via the USB interface. By using the supplied software, you can organize, stor e and print out still images. When printing still images, you can add titles and frames to them. Use the USB cable and the ...

  • Canon GL2 - page 135

    135 E Using a Memory Card Other Information and Pr ecautions The camcorder formats memory car ds in DCF (Design rule for Camera File system). Images recor ded on a memory card with this camcorder can also be transferr ed to a PC with the use of the following products made for SD Memory Car ds or MultiMediaCards: PC Card Adapter: Holds a memory card ...

  • Canon GL2 - page 136

    136 E Additional Information Notes on Using the Batteries Charging and Recording Times • These times vary — the safest policy is always to have 2 or 3 times as many battery packs as you think you will need. •Y ou will get more recor ding time if you tur n the camcorder of f between shots, instead of leaving it in recor d pause mode. • The c ...

  • Canon GL2 - page 137

    137 E Additional Information When to Recharge Y ou can recharge a lithium ion battery pack whenever it is convenient. Unlike a conventional battery pack, it does not have to be fully discharged first. However , as the battery pack will naturally discharge itself over time, it is best to charge it the same day you plan to use it, or the day before. ...

  • Canon GL2 - page 138

    138 E Additional Information Installing the Backup Battery Open the backup battery cover and insert the CR2025 lithium battery with the + side facing outwards. Click the cover back into place. This backup battery allows the camcorder to r etain the date and time and other settings when the main power source is r emoved. It has a life span of about ...

  • Canon GL2 - page 139

    139 E Additional Information Maintenance A void high temperatures and high humidity . • Do not leave the camcorder inside a car in hot weather , for example. • Be careful of heat radiating fr om video lighting equipment. • Do not take the camcorder into a humid r oom. A void sudden changes in temperature. • If you take the camcorder fr om a ...

  • Canon GL2 - page 140

    140 E Additional Information V iewfinder • Clean the viewfinder screen. Rotate the viewfinder upwar ds. Remove the viewfinder protect cover and clean it with a cotton swab etc. When finished, return it flush with the camcorder . • The viewfinder screen scratches easily . Be careful when cleaning. LCD • Clean the LCD screen using a commer cial ...

  • Canon GL2 - page 141

    141 E Additional Information Power sources •Y ou can use the compact power adapter to operate your camcorder and charge battery packs in any country where the electricity supply is between 100 and 240 V AC, 50/60 Hz. Contact your Canon dealer for information about plug adapters for overseas use. TV playback • Although you can always play back y ...

  • Canon GL2 - page 142

    142 E Additional Information Condensation Condensation may form on the camcorder when it is moved fr om a cold place to a warm place. Using the camcorder while condensation is pr esent can damage both the tape and the camcorder . Condensation may form: When the camcorder is taken fr om an air -condi- tioned room to a warm, humid place Protecting th ...

  • Canon GL2 - page 143

    Tr oubleshooting Cause and/or what to do about it • The camcorder is not set to the appr opriate mode ( 35, 87). • The cassette is not loaded or is set for erasure prevention ( 18-19). • The cassette has reached the end. • The power source is not pr operly connected, or the battery pack is exhausted or not properly attached ( 16-17, 137). ? ...

  • Canon GL2 - page 144

    144 E Additional Information Note: • Some subjects are not suitable for autofocus. In these situations, you will often get better r esults using manual focus ( 79). Focus on something which is about the same distance away , lock the focus, and then point the camcorder at your original, har d-to-focus subject. Horizontal stripes Many subjects at d ...

  • Canon GL2 - page 145

    145 E Additional Information Memory Card Operations Cause and/or what to do about it • It is not turned the right way ( 115). Tu rn it the right way and try inserting again. •T ur n the camcorder’ s power off and back on again and remove and r einsert the card. If the mark continues to flash, format the memory card. • The camcorder is not s ...

  • Canon GL2 - page 146

    146 E Additional Information Miscellaneous Cause and/or what to do about it • The remote sensor mode is set to OFF B in the menu ( 30). • The remote sensor modes of the wir eless controller and the camcor der itself are differ ent ( 30). • The batteries are dead or not inserted. • Check the screen displays ( 137). • This is unlikely , but ...

  • Canon GL2 - page 147

    147 E Additional Information SD Memory Card or MultiMediaCard IFC-300PCU USB Cable PC Card Adapter FD Adapter Stereo Microphone (commercially av ailable) WL-D77 Wireless Controller MiniD V Video Cassette TV VCR ZR-1000 Zoom Remote Controller WD-58H MA-300 Microphone Adapter DM-50 Directional Stereo Microphone VL-3 Video Light CB-920 Car Battery Ada ...

  • Canon GL2 - page 148

    148 E Additional Information Call or visit your local retailer/dealer for genuine Canon video accessories. Y ou can also obtain genuine accessories for your Canon camcorder by calling: 1-800-828-4040, Canon U.S.A. Information Center . BP-915, BP-930, BP-945 Battery Packs Extra batteries for use with the GL2. CB-920 Car Battery Adapter Power your ca ...

  • Canon GL2 - page 149

    149 E Additional Information VL-10Li Battery Video Light This compact yet powerful video light can be used for both indoor and outdoor shooting. • Use the BP-900 Series battery packs to power the light. Approximate usage times ar e as follows: BP-915: 60 min., BP-930: 120 min., BP-945: 170 min. 220EX/420EX/550EX Speedlite Attach them to the GL2 t ...

  • Canon GL2 - page 150

    150 E Additional Information Y ou can select to display or hide the operating state of the camcorder on the LCD scr een/viewfinder . The display also appears on a TV connected to the camcorder . Press the wir eless controller’ s TV SCREEN button or set TV SCREEN to OFF in the menu to hide the displays on the TV screen. Y ou can also use the custo ...

  • Canon GL2 - page 151

    151 E Additional Information Screen Displays in T APE CAMERA Mode S1/500 10 sec F1.8 SELF–T 0 REC 0:12:34 60 min 1 VOICE 16 bit [ DV IF ] 16:9 PHOTO F MANUAL CP NDMF MF CHAR.REC FADE–T N.Y. 12:00 AM JAN.15,2002 ON U jh A T W P S dB qwe #1 rt y u !7 !8 !9 #2 @0 i o !0 !1 !2 !3 !4 !5 !6 #0 @9 @8 @7 @6 @5 @4 @3 @2 @1 C q White Balance ( 80) w Reco ...

  • Canon GL2 - page 152

    152 E Additional Information Screen Displays in CARD CAMERA Mode S1/720 10SEC F2.0 SELF–T 0 FINE 9999 1488 1 F MANUAL CP NDMF MF 12:00 AM JAN.15,2002 ON jh A T W dB qw !0 e r o !1 !2 !3 !4 t y u i @2 @1 @0 !9 !8 !7 !6 !5 q White Balance ( 80) w Self-Timer Countdown ( 71) e Image Stabilizer ( 46) r Image Quality ( 115) t Remaining Card Capacity ( ...

  • Canon GL2 - page 153

    153 E Additional Information Caution Phrases T ime zone, date and time are not set. This message appears each time you turn the power on until you set the time zone, date and time ( 32). Battery pack is exhausted. Replace or charge the battery pack. Replace the tape or change the position of the protect switch on the cassette ( 18, 19). The camcord ...

  • Canon GL2 - page 154

    154 E Additional Information Y ou attempted to copy a copyright protected tape. May also be displayed when an anomalous signal is sent during Analog Line-in recor ding ( 100, 101). Memory Card Caution Phrases Memory card not inserted into the camcor der ( 115). The SD Memory Card is set for erasur e prevention. Replace the card or change the positi ...

  • Canon GL2 - page 155

    155 E Additional Information Specifications Power supply (rated): Power consumption (AF turned on): T elevision system: V ideo recor ding system: Audio recor ding system: Image sensor: T ape format: T ape speed: Maximum recor ding time (80 min. cassette): Fast forward/r ewind time: Lens: Focusing system: Minimum focusing distance: Maximum shutter s ...

  • Canon GL2 - page 156

    156 E Additional Information A/V terminal input/output: S-video terminal input/output: MIC terminal input: Headphone terminal: LANC terminal: Operating temperatures: Dimensions: W eight: ø3.5 mm minijack Audio input: 0 dBV (47 kohm load)/ 47 kohms (AUDIO A TT ON) -10 dBV (47 kohm load)/ 47 kohms (AUDIO A TT OFF) Audio output: 4 dBm (47 kohm load)/ ...

  • Canon GL2 - page 157

    157 E Additional Information Index 16:9 Guides ···············································38 16:9 Wide Screen ······································37 6-Second Auto Date.··································92 Å Abroad, Using the ...

  • Canon GL2 - page 158

    158 E Additional Information ˆ ND Filter ·····················································47 Ø Output Channel ·······································111 ∏ Photo Search ········································· ...

  • Canon GL2 - page 159

    159 E Additional Information Menu at a Glance Function 16:9 Effect 16:9 Guides 6-Second Auto Date AE Shift Analog-Digital Converter Audio Attenuator Audio Dubbing Audio Level Indicator Audio Mode Beep Card Access Display Character Recording Clear Scan Color Gain Color Phase Copying from Car d to T ape Custom Key Set Custom Key On/Off Data Code Date ...

  • Canon GL2 - page 160

    160 E Additional Information h h h h h h h h h h Function Setup Level Sharpness Shutter Sound T ally Lamp T ime Zone/DST T itle Mix TV Screen V iewfinder Brightness Wir eless Controller Zebra Pattern Zebra Pattern Level h h h h h h h h h h h h h h h h h Submenu CUSTOM PRESET CUSTOM PRESET CARD SET UP SYSTEM SYSTEM → TITLE MIX DISP . SET UP DISP . ...

  • Canon GL2 - page 161

    161 E Additional Information U.S.A. CANON ® GL2 DIGIT AL VIDEO CAMCORDER LIMITED W ARRANTY The limited warranty set forth below is given by Canon U.S.A., Inc. (“CUSA”) with respect to each Canon GL2 Digital Video Camcorder (“DV Camcor der”) purchased and used in the United States. Each Canon DV Camcorder , when delivered to you in new cond ...

  • Canon GL2 - page 162

    162 E Additional Information CANADA CANON CONSUMER DIGIT AL VIDEO EQUIPMENT LIMITED W ARRANTY The limited warranty set forth below is given by Canon Canada Inc. (“Canon Canada”) with respect to Canon digital video equipment purchased in Canada. This limited warranty is only ef fective upon presentation of a bill of sale or other pr oof of pu r ...

  • Canon GL2 - page 163

    U .S.A. CANON U.S.A., INC. NEW JERSEY OFFICE 100 Jamesb urg Road, Jamesburg, NJ 08831 USA CANON U .S.A., INC. CHICAGO OFFICE 100 P ar k Blvd., Itasca, IL 60143 USA CANON U .S.A., INC. LOS ANGELES OFFICE 15955 Alton P ar kwa y , Ir vine, CA 92618 USA CANON U .S.A., INC. HONOLULU OFFICE 210 Ward A ven ue, Suite 200, Honolulu, HI 96814 USA ● If you ...

Manufacturer Canon Category Camcorder

Documents that we receive from a manufacturer of a Canon GL2 can be divided into several groups. They are, among others:
- Canon technical drawings
- GL2 manuals
- Canon product data sheets
- information booklets
- or energy labels Canon GL2
All of them are important, but the most important information from the point of view of use of the device are in the user manual Canon GL2.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Canon GL2, service manual, brief instructions and user manuals Canon GL2. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Canon GL2.

Similar manuals

A complete manual for the device Canon GL2, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Canon GL2 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Canon GL2.

A complete Canon manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Canon GL2 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Canon GL2, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Canon GL2, that we can find in the current document
3. Tips how to use the basic functions of the device Canon GL2 - which should help us in our first steps of using Canon GL2
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Canon GL2
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Canon GL2 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Canon GL2?

Use the form below

If you did not solve your problem by using a manual Canon GL2, ask a question using the form below. If a user had a similar problem with Canon GL2 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)