Manual Samsung OfficeServ

100 pages 1.62 mb
Download

Go to site of 100

Summary
  • Samsung OfficeServ - page 1

    Every effort has been made to eliminate err ors and ambiguities i n the information contained in this guide. Any questions concerning information presented here should be directed to SAMSUNG TELECOMMUNICA TIONS AMERICA, 1301 E. Lookout Dr . Richardson, TX. 75082 telephone (972) 761- 7300. SAMSUNG TELECOMMUNICA TIONS AMERICA disclaims all liabilitie ...

  • Samsung OfficeServ - page 2

    Samsung T elecommunications Publication Information SAMSUNG TELECOMMUNICA TIONS AMERICA reserves the right without prior notice to revise information in this publication for any rea son. SAMSUNG TELECOMMUNICA TIONS AMERICA also reserves the right without prior notice to make changes in desi gn or component s of equipment as engineering and manufa c ...

  • Samsung OfficeServ - page 3

    TABLE OF CONTENTS INTRODUCTION 1 Introduction ................................................................................................................... ....................... 1 Document Content and Organization .............................................................................................. .... 1 Conventions............... ...

  • Samsung OfficeServ - page 4

    DID Inter-Worki ng BLF Group Settings ........................................................................................... .. 24 BLF (Busy Lamp Field) W indow ................................................................................................... ..................... 25 Searching a BLF Gr oup..................................... ...

  • Samsung OfficeServ - page 5

    Unhold ......................................................................................................................... ...................... 62 T ransfer ....................................................................................................................... ...................... 63 Consultation T ransfer ................ ...

  • Samsung OfficeServ - page 6

    ANNEX B. Importing/Exporting Excel Files 86 Importing Data in an Excel File Format Into a Phone Book ...................................................................... .... 86 Exporting Phone Book Dat a to an Excel File ..................................................................................... ............... 90 ABBREVIA TION 92 SOFT ...

  • Samsung OfficeServ - page 7

    1 INTRODUCTION Introduction This manual describes the functions of the Of ficeServ Operator , that include installation, service settings, and operations. Document Content and Organization This document consists of five chapt ers and two annexes as follows: CHAPTER 1. Introduction This chapter provides an ov erview of the OfficeServ Operator and de ...

  • Samsung OfficeServ - page 8

    2 ANNEX B. Importing/Exporting Excel Files This chapter describes y Method of importing Excel data into a ph one book. y Method of exporting phone book d ata into an Excel file. Conventions The following special paragraphs are used i n this document to point out information that must be read. This information may be set-of f from the surrounding te ...

  • Samsung OfficeServ - page 9

    3 CHAPTER 1. Introduction to the OfficeServ Operator OfficeServ Operator The OfficeSe rv Operator is a Windows based operator console for the Samsung iDCS 100/500 R2 products. It provides a complete call control facility for operators and reception st aff within the company , and provides an easy to use and intuitive interface for handling calls. M ...

  • Samsung OfficeServ - page 10

    4 Overview Introduction to the OfficeServ Operator The OfficeS erv Operator is a PC-based console, which is a telephony application that interfaces with the iDCS 1 00/500 R2 systems. On ce the operator re ceives a request for call operation from the iDCS system the operato r connect s or transfers the call using the OfficeServ Operator . For insta ...

  • Samsung OfficeServ - page 11

    5 System Requirements The PC where the OfficeS erv Operator will be installed should me et the requirements below: Category Specifications Operating System Windows 2000 Series(Profession al, Server , and Advanced Server), Windows XP Professi onal Processor(CPU) Pentium 4 / 1.6 GHz or higher (A dual Pentium processor is recommended for the system wi ...

  • Samsung OfficeServ - page 12

    6 Display of the OfficeServ System Information Direct Inward Dialing (DID), Calling Line Identification Present ation(CLIP), station group s, speed dial numbers, a nd the Direct T runk/Direct S tation (DT/DS) button information of an operator st ation, which are set in the Of ficeServ system, are displa yed. The DID information is displayed in the ...

  • Samsung OfficeServ - page 13

    7 CHAPTER 2. OfficeServ Operator Installation Preparations Before Installation Preparations before inst alling the OfficeServ Operator are described below: OfficeServ Licensing T o operate the Of ficeServ Operator , an available license should be registered to Of ficeServ Link. The license number is granted by the reseller of the Of ficeServ Operat ...

  • Samsung OfficeServ - page 14

    8 Procedures for Installing the OfficeServ Operator Follow the steps below to set up the Of ficeServ Operator: 1 Double-click the execution file of Of ficeServ Operator installation CD, or d ownloaded OfficeServOp erator .exe to see the installation screen belo w: 2 C lick [Next>]. 3 Read the Software License Agreement from the window below care ...

  • Samsung OfficeServ - page 15

    9 4 Select the destination folder for the Of ficeServ Operator install ation, and click [Next>]. By default, the folder for the program installa tion is ‘C:..Samsung ElectronicsOf ficeServ Operator ’. If the user wants to install the program in another folder , click [Browse...] to select a folder . 5 Enter the name of the program folder ...

  • Samsung OfficeServ - page 16

    10 6 Once the window below appear s, click [Edit...] to modify the information about phone numbers or modem options: The window that displays phone numbe rs and modem options depends on the user’s operating system. 7 Once the window below appears, fill out each field and click [OK]. ...

  • Samsung OfficeServ - page 17

    11 Parameter Description General Allows the user to select the country that is using the OfficeServ Operator . Area Code Rules Allows the user to enter an area code except for ‘0’. The user must enter the numbers set in the iDCS 100/500 R2 system. Calling Card Select one of tone dialing and pulse dialing. 8 Once the window below appears, enter ...

  • Samsung OfficeServ - page 18

    12 9 Click [Finish] from the window below to te rminate the Of ficeServ Operator setup. Once the Offi ceServ Operator setup is com pleted, a shortcut icon for the Of ficeServ Operator is created on the desktop of the PC. ...

  • Samsung OfficeServ - page 19

    13 CHAPTER 3. OfficeServ Operator Description This chapter describes the menus and windows of Of ficeServ Operator . OfficeServ Operator Menus The OfficeServ Operator menus include File, Call, T ools, V iew , and Help. y File: Allows the user to start or exit the OfficeServ Operator application. y Call: Allows the user to make a call. y T ools: All ...

  • Samsung OfficeServ - page 20

    14 Operator , the window that allows the user to set a station number during initialization appears as shown below: 2 Select an extension number to be used from the OfficeServ Operator and click [OK]. Initialization Process The initialization process m eans that the OfficeServ Operator downl oads the data requi red to operate the Of ficeServ Operat ...

  • Samsung OfficeServ - page 21

    15 Each window of the <Of ficeServ Operator> main window i s described below: Window Function Information Helps the Of ficeServ Operator users learn the Of ficeServ Operator by giving the users necessary useful information. Also, displays the messages received from other st ation subscribers. Incoming Calls Displays the calls connected to the ...

  • Samsung OfficeServ - page 22

    16 Menus The menus of the Of ficeServ Operator are described below: Main Menu Submenu Description Rest art Restart s the Of ficeServ Operator . File Exit T erminates the Of ficeServ Operator . Dial~Page Controls calls. De-allocate the disconnected calls on the operator line Deletes all the disconnected calls from the operator lines. De-allocate All ...

  • Samsung OfficeServ - page 23

    17 Main Menu Submenu Description Refresh Active View Refreshes and displays the st atus of calls displayed in the <Active Calls> window . Refresh Incoming Vie w Refreshes and displays the st atus of calls displayed in the <Incoming Calls> window . Refresh Held Calls Refreshes and displays the st atus of calls displayed in the <Held C ...

  • Samsung OfficeServ - page 24

    18 Incoming Calls Window The figure below shows the calls connected to the Of ficeServ Operator in sequence. The columns displayed in the <Incomi ng Calls> window are describ ed below: Column Description CID Caller Identification. Phone number and name of the caller DID Phone number and name of a call co nnected to the DID Duration Elap sed t ...

  • Samsung OfficeServ - page 25

    19 G The columns displayed in the <Active Calls> windo w are described below: Column Description CID Phone number and name of the calle r DID Phone number and name of a call co nnected to the DID S tate Call status Duration Elapsed time since call connection Details Other information Caller Information Information about the caller Recently Fo ...

  • Samsung OfficeServ - page 26

    20 Saving New Customer Information T o save new customer information, enter an extension number or external phone number in [T el No.]. Select the [Save Cont act] menu to see the window below: G Select the table to save and click [OK]. Create a new t able. Select the checkbox of [New], enter the tabl e name, and click [OK] to save the information i ...

  • Samsung OfficeServ - page 27

    21 Select a number of the list of the recently forwarded numb ers and click the [T] button at the right of the window to forward a call to the number . Using the Recently Forwarded Number T o use the recently forwarded num ber , the caller information must be displayed. If caller information does not exist in the dat abase, the recently forwarded n ...

  • Samsung OfficeServ - page 28

    22 Held Calls Window When an active call is on hold, the call will be displayed in the <Held Calls> window . The columns displayed in the <Held Call s> window are described b elow: Column Description CID Phone number and name of the calle r DID Phone number and name con nected to the DID Duration Elapsed time since call hol d Note Notes ...

  • Samsung OfficeServ - page 29

    23 The call buttons are described bel ow: Button G Description G  Dial  Answer  Drop  Hold  Unhold   T ransfer , T o ggle  S tation Park  Orbit Park  Conference  Page  Camp On  T ransfer to V oice Mail , Call Recording with V oice Mail Callback Leave Message Redirect Off Hook V oice Announcement (OHV A) Com ...

  • Samsung OfficeServ - page 30

    24 The columns are descri bed below: Column Description T el DID number set in the system Name DID name set in the system BLF BLF group name that inter-works with the DID Use of the Queue List The Queue list is used for the operator program of the call center . Currently , the list is not supported. DID Inter-Working BLF Group Settings Click the BL ...

  • Samsung OfficeServ - page 31

    25 BLF (Busy Lamp Field) Window The <BLF> window sho ws that the device is being us ed. Also, this window displays the st atus of the office users wh o use the iDCS system. OfficeServ Op erator users can create the desired BLF group by usi ng the device information received from the system. The users can set an environment for use by changing ...

  • Samsung OfficeServ - page 32

    26 Searching a BLF Group The user can search a BLF group based on phone numbe r , name, or note. When pressing [F5] of the keyboard, the [Find] text field next to <Note> is focused in the window . Enter the phone number , name, or note of the BLF the user want s to search a nd click the [Find] button or [Enter] key to search the BLF . Searchi ...

  • Samsung OfficeServ - page 33

    27 When clickin g the [Find] button or [Enter] key , the window focus moves to BLF ‘201’ and ‘201’ is entered in the destination box. If multiple search destinations exist, use arrow keys. Searching by Name When pressing [F5] and entering characters except for 0 to 9, a name is automatically selected and the BLF device sta rting with the ch ...

  • Samsung OfficeServ - page 34

    28 Click the [Find] button or [Enter] key . Then, the window focus moves to the BLF device with a name of ‘Rob Wylie’. ‘202’, which is the phone number of ‘Rob Wylie’, is entered in the destination field of the call button window . If multiple search destinations exist, use arrow keys. BLF Group Management Creating the BLF Group Put the ...

  • Samsung OfficeServ - page 35

    29 Deleting the BLF Group Select a BLF group to be deleted from the list box of the <BLF> window and right-click on the group to select the [Delete] menu. Once the window that prompt s the user to delete the group appears, click [Y es] to delete the selected BLF group. Changing the BLF Group Name Select the BLF group whose name will be change ...

  • Samsung OfficeServ - page 36

    30 Enter the name to be changed once input is ac tive. The name of the default group marked as ‘*’ cannot be changed. Refreshing the BLF Group Right-click on the list box of the <BLF> window a nd select [Refresh] to change the list of the BLF group to the recent data. Selecting the Refresh Menu Select a BLF group from the <BLF> wind ...

  • Samsung OfficeServ - page 37

    31 Drag and drop the selected device o n a new BLF group (Group 3) by using the mouse. The selected device will be added to the group. G Device Management Adding a Device Right-click on the BLF group and click [New Device] to add a system device to the BLF group . Select a device to be added from [Number] in the window below and fill out [Name] and ...

  • Samsung OfficeServ - page 38

    32 Click [OK] to add the newly created device to the BLF group. Adding a Speed Dial Number Right-click on the BLF group and sel ect [New S peed Dial] to add a number including a C.O.line connection number (e.g. mobile phone, external phone) to a speed dial number . G Enter a speed dial number to be added in [Number] in the window below and fill out ...

  • Samsung OfficeServ - page 39

    33 Modifying the Device Select and right-click the BLF device to be modified. Then, select [Edit Lamp]. Modify [Name] and [Note] in the window below and click [OK]. Deleting the Device Select and right-click the BLF device to be deleted. Then, select [Delete Lamp]. G G G G G G G G G G ...

  • Samsung OfficeServ - page 40

    34 Once the window that prompts the user to delete th e device appears, click [Y es] to delete the selected device. Device View Type The device view types in the BLF area includ e Card Vi ew , List View , and Number View . Right-click on the BLF are a and select the desired view type from [V iew] to select a device view type. Sorting out Devices Th ...

  • Samsung OfficeServ - page 41

    35 Refreshing the Device Right-click on the BLF area and select [Refresh] to change the status of the BLF device to new data. Selecting the Refresh Menu Select a BLF device from the <BLF> window and [Refresh] to i mport and display the status of the selected devi ce. Select [Refresh] without selecting a device to import and display the status ...

  • Samsung OfficeServ - page 42

    36 Applying Dev ice Size The changed device size is applied to other BLF groups the same. Calling Functions Dialing Select and right-click a device to dial and select or double-click [Dial ]. Pickup Select and right-click a BLF device that is being connected and can be picked up and click or double-click [ Pick Up]. NOTE ...

  • Samsung OfficeServ - page 43

    37 Transfer/Complete Transfer Select and right-click a BLF device and click or double-click T ransfer/Complete T ransfer during being connected. Setting/Releasing Do Not Disturb (DND) Select and right-click a st ation device the user wa nts to set or release DND and click [DND]. Setting Call Forwarding Unconditional Enter the called number by using ...

  • Samsung OfficeServ - page 44

    38 Right-click on the st ation device for call forwarding unconditional and sel ect [All Call Forward]. Releasing Call Forwarding Unconditional Select and right-click on the station de vice where call forwarding unconditional has been set and select [All Call Forward]. ...

  • Samsung OfficeServ - page 45

    39 Icons for Status Display Device status is displayed at the left of the BLF device numbers. Icon Description Blank Idle S tatus Busy Out of Service In conference Off-Ho ok or Ringback Disconnected Do Not Disturb On hold S tation lock A phone is ringing Shows that all forwarding has been set Outgoing speed dial number created from the database S p ...

  • Samsung OfficeServ - page 46

    40 Stat u s Description CBK(X) Number (X) of callba ck that has been set. MSG(X) Number (X) of the messages lef t in the user ’s st ation. VM(X) Number (X) of the voice messages saved in the user ’s voice m ailbox. DND ON/OF F Shows whether the stati on of the operator is in a DND state or not . Double-click DND ON to release DND. Double-click ...

  • Samsung OfficeServ - page 47

    41 CHAPTER 4. OfficeServ Operator Settings This chapter describes the procedu res for setting various options through the OfficeS erv Operator . Changing T elephone Line This section describes the procedures for changing the telephone lines of the OfficeServ Operator . Option Settings This section describes the procedure s for setting functions suc ...

  • Samsung OfficeServ - page 48

    42 Option Settings Select [Options] from the [T ools] menu to set va rious options for using the OfficeServ Operato r . The [Options] window is co mposed of many tabs as d escribed below: Ta b Description General Sets general option values. Key T elephone Selects the information to be received fro m the OfficeServ system. Columns Determines if each ...

  • Samsung OfficeServ - page 49

    43 General This tab enables the user to set general option values of the OfficeServ Operator . Parameters of the [General] t ab are described below: Parameter Description Extension Passcode Enter the passcode of the extension phone.(default : 1234) OfficeServ Link IP Addr . Enter the IP address of the Of ficeServ Link connected to the OfficeServ sy ...

  • Samsung OfficeServ - page 50

    44 Parameter Description EasySet URL Enter the URL address of the Easyset Server Recommendations when ‘Automatic Drop’ is selected If ‘Automatic Drop’ is selected whil e an extension number is set for transferring blocked calls, all incoming calls to the extension number will be dropped and making a call from the extensi on number will be l ...

  • Samsung OfficeServ - page 51

    45 Parameter Description S tation S peed Dials Retrieves the speed dial information set in the operator’s phone. Reflect the configuration changes of the switch in real time except DT/DS buttons and S tation S peed Dials Sets whether to apply in real time the changes in system information, such as the DID t able, CLIP t able or station group setu ...

  • Samsung OfficeServ - page 52

    46 Category Parameter Description S tate S tatus of the call Active Calls Contact Info. Displays the CID an d the number most recently transferred Note Call-related notes entered by the operator Held Calls Orbit Park Displays the [Orbit Park] button Display This tab enables the user to select the display format. G Parameters of the [Display] t ab a ...

  • Samsung OfficeServ - page 53

    47 Category Parameter Description Hide ‘T otal S tation’ Group Does not display the ‘T otal S tation’ group on the <Busy Lamp Field> windo w . Hide ‘T otal T runk’ Group Does not display the ‘T otal Trunk’ group on the <Busy Lamp Field> windo w . Toolbar This submenu enables the user to select t he [C all Control] button ...

  • Samsung OfficeServ - page 54

    48 Station Group This tab enables the user to select a station group from the station groups set in the iDCS system. Then the selected station group will be displ ayed on the BLF group list of the OfficeServ Operator . After selecting a st ation group to be displayed in the BLF group list, click the [OK] button. Contact Information This tab ena ble ...

  • Samsung OfficeServ - page 55

    49 Parameters of the [Cont act Information] tab are descri bed below: Parameter Description Internal Inbound Calls If an intercom call arrives, the system retrieves the CID data from the DB. External Inbound Calls If an external call arrives, the system retrieves the CID data from the DB. - Search CLI T able for external calls, if a match has not f ...

  • Samsung OfficeServ - page 56

    50 Parameter Description Do not allow to answer other calls when a call exist s Any newly incoming calls will be rejected when the user is busy . Blocked CIDs This tab en ables the user to block u ndesired calls. Calls from the phone numbers regi stered to the block list are automati cally transferred to the station set in the [Blocked Calls Redire ...

  • Samsung OfficeServ - page 57

    51 Urgent/VIP CIDs This tab ena bles the user to set an urgent or important call. Since calls from the phone numbers registered to the Urgent/VIP CIDs list are displayed red on the Incoming Calls window , the calls can be easily recognized. Parameters of the [Urgent/VIP CIDs] tab are described below: Parameter Description T ype a CID Enter a phone ...

  • Samsung OfficeServ - page 58

    52 Color This tab ena bles the user to change the color of the title bar and the colo r of trunk calls and the colors for BLF statu ses on the <Incoming Calls> wind ow and, <Active Calls> window and <Held Calls> window . Select a basic color o r click [Define Custom Colors>>] to select a d esired color and cli ck [OK]. The o ...

  • Samsung OfficeServ - page 59

    53 Category Parameter Description External Connection Color indicating that the BLF device is set to ‘External Connected’ Common Restore Initial Color Sets to default color . Advanced This tab enables the user to set a p assword that inhibits common users from changing the current options. Parameters of the [Advanced] t ab are described below: ...

  • Samsung OfficeServ - page 60

    54 Function Key This tab enables the user to set the function keys from [F7] to [F12], which are used for call control. Click a function key . After assigning a function to the selected key , press the selected key to execute the assigned function. ...

  • Samsung OfficeServ - page 61

    55 Message Handling This function enables the user to ex change messages with another Of ficeServ Operator user or with other Of ficeServ applications, such as the Of ficeServ Call, which support s message functions. Enable Message This menu enable s the user to login to the Of ficeServ Link, which serves a s a message server , and exchange me ssag ...

  • Samsung OfficeServ - page 62

    56 If the user is logged in to the OfficeServ Link, the <Send Message> window will be displayed as shown below: If the user is not logged in to the Of ficeServ Link, the user can automatically login to the OfficeServ Lin k by selecting the [Send Message] menu. Enter the extension number of the reci pient in the [T o] text box at the upper sec ...

  • Samsung OfficeServ - page 63

    57 Select the table to be added, and click the [Run] button. If a valid external outbound call information exists in the selected t able, the <Outgoing BLF> window is displayed as shown below: Click the [OK] button to register the outgoing BLF group with the ‘^Business’ name to the BLF group window . The outgoing group is automatica lly d ...

  • Samsung OfficeServ - page 64

    58 CHAPTER 5. Call Control This chapter describes the procedures for usi ng the general functions and additional functions of the system through the call control but tons, mouse, keyboard, and popup menu. The progress of a call is displayed accordingly on the <Incomin g Calls> window , <Active Calls> window , or <Held Calls> windo ...

  • Samsung OfficeServ - page 65

    59 Button Call Menu Description Leave Message Leaves a message in a busy/unanswered station Redirect T ransfers a call without answering the incoming call OHV A Urgent notification Complete T ransfer C omplete T ransfer Redial Redial Reestablish Reest ablish General Functions Dial Dialing methods provided by the system are a s follows: Dialing a Ca ...

  • Samsung OfficeServ - page 66

    60 Dialing a Call by using the Popup Menu Select and right-click a devi ce from the <BLF> window . And then select the [Dial] menu. Entering Numbers and S pecial Characters from a Key board The OfficeServ Operator enables the user to conveniently enter the numbers from 0 to 9 and special cha racters such as # and * usi ng the keyboard without ...

  • Samsung OfficeServ - page 67

    61 Answering a Call by using the Call Control Button Select a call to answer , and click the [Answer] button ( ). Answering a Call by using the [Enter] Key Select a call and press the [Enter] key to answer the call. Answering a Call by Double-clicking Double click an incoming call from the <Incoming Calls> window to answer the call. Answering ...

  • Samsung OfficeServ - page 68

    62 Selecting the Call on the T op of the <Active Calls> Windo w Press the [F3] key to select the first call on the list of the <Active Calls> window . Press the [F4] key to select the first call on the list of the <Held Calls> window . Hold The [F3] key is used for selecting the first call on list of the <Active Calls> windo ...

  • Samsung OfficeServ - page 69

    63 Answering a Held Call by using the Call Control Button Select a held call and click the [Unhol d] button ( ) to answer the held call. Answering a Held Call by using the [Enter ] Key Select a held call and press the [Enter] key to answer the held call. Answering a Held Call by Double-clicking Double-click a held call to answer the held call. Answ ...

  • Samsung OfficeServ - page 70

    64 Canceling Call T ransfer by using the [-] Key The extension number of the caller and the extension num ber of the final recipient are displayed in <Active Calls> window wh en the call transfer is attempted. Press the [-] key to cancel the call transfer . Canceling Call T ransfer by using the Popup Menu The extension number of the caller an ...

  • Samsung OfficeServ - page 71

    65 The operator can toggle a call between a ‘Connected’ station and a st ation ‘On T r ansfer ’, or complete the call transfer . T oggling a Call by using the Call Control Button Once the [T ransfer] button changes to t he [T oggle] button, press the [T oggle] button ( ). Completing Consult ation T ransfer by using the [Enter] Key Press the ...

  • Samsung OfficeServ - page 72

    66 Parking a Call on an Available S tation through Dra g-and-Drop Press the [Alt] key and drag a call from the <Activ e Calls> window , and drop the call on an available stati on in the <BLF> window . Attempt/Cancel a Conference This menu enables multiple users to join a conference call. Attempting a Conference Call by using the Call Co ...

  • Samsung OfficeServ - page 73

    67 Attempting a Conference Call using the Call Con trol Button Press the [Conference] button after th e recipient answers the call to st art a conference call. Once the conference call is conne cted, the <Active Calls> window is di splayed as shown below: G G Add/Remove Participants or Leave a Conference Call This section describes the proced ...

  • Samsung OfficeServ - page 74

    68 Page Paging within the Default Page Zone Click the [Page] button ( ) in order to page the default page zone set by [Option]. Paging in a Zone other than the Default Page Zon e Enter a target zone and cli ck the [Page] button ( ). When not using a headset A user who does not use a headse t must lift the handset before paging. Additional Functions ...

  • Samsung OfficeServ - page 75

    69 Holding a Call with a Note by Using the Call Control Button Enter a note in the [Note] column of the <Active Calls> windo w , and click [Hold] button ( ) to display the content of the note in the <Held Calls> wi ndow as shown below: G Holding a Call with a Note by Using the [/] Key Enter a note in [Note] of the <Active Cal ls> ...

  • Samsung OfficeServ - page 76

    70 Executing the ‘T arget Hold’ Function by using the [/] key . Enter the target extension number and press the [/] key to execute the ‘T arget Hold’ function. Executing the ‘T arget Hold’ Function by Drag and Drop Enter the targ et extension number and drag t he call from the <Active Calls> window and drop the call on the <Hel ...

  • Samsung OfficeServ - page 77

    71 Saving a Call by using the [T ab] Key Press [F4] to open the <Held Calls> window , and press the [T ab] key to select number 0. Then, the number 0 button will be displayed blue. Press the [Enter] key to save the call in numb er 0. After the call is saved, ‘P:0’ is displayed in the [Note] column and the number 0 but ton is displayed in ...

  • Samsung OfficeServ - page 78

    72 Reanswering a Call by using the [T ab] Key Press [F4] to open the <Held Calls> window , press the [T ab] key to select the target number displayed in yellow , and press the [Enter] key to reanswer the call saved in the selected number . Reanswering a Call by using the [Enter] Key Press [F4] to open the <Held Calls> window . Select a ...

  • Samsung OfficeServ - page 79

    73 Leave Message If the target st ation is busy or does not answer , the caller can leave a message. Leaving a Message by using the Call Control Button After dialing the st ation, click the [Message] button ( ) to leave a message. Leaving a Message by using the Popup Menu After dialing the st ation, right-click a d evice from the <Active> win ...

  • Samsung OfficeServ - page 80

    74 OHVA When the user makes or transfers a cal l to a busy st ation, the user can set the ‘OHV A ’ function. Setting the ‘OHV A ’ Function by using the Call Control Button When making or transfe rring a call to a busy station, click the [OHV A] button ( ) to set the ‘OHV A ’ function. Setting the ‘OHV A ’ Function by using the Popup ...

  • Samsung OfficeServ - page 81

    75 Transfer to a Voice Mailbox If a call is connected or transferred to a busy or unanswered sta tion, the user can transfer the call to the voice mailbox of the recipient. Enter the extension number of the recipient, and click the [T ransfer to a V oice Mailbox] button ( ). Record Voice Messages Click the [Record] button ( ) to record messages in ...

  • Samsung OfficeServ - page 82

    76 Pickup If the connected station does not answer the call, another Of ficeServ Operator user can pick up the call. Call Pickup by Double Clicking Double-click the station that will pick up a call from the <BLF> window . The icon below is displayed when a call is connected to a station of the <BLF > window: Call Pickup by Using the Pop ...

  • Samsung OfficeServ - page 83

    77 Pressing the [Insert] Key to Hold the T argeted Reconnected Call on Hold Again When a t argeted call on hold is reconnected a nd ‘Hold Recall: extensio n number’ is displ ayed at the [Details] field of the <Active Calls> window , Press the [Insert] key to do a target hold. Pressing the [Insert] Key to do an Orbit Park the Reconnected C ...

  • Samsung OfficeServ - page 84

    78 ANNEX A. Retrieving the Call Log This chapter describes the proc edures for re tr ieving the call log in the OfficeServ Operator . Log Vi ewer St art Select the [Log Vie wer] menu from the [T ools] menu of the OfficeServ Operator , and execute the Log Viewer to retri eve the call log. Log Vie wer Menus Examples of the logs that can be retrieved ...

  • Samsung OfficeServ - page 85

    79 Log Viewer Menus The OfficeSe rv Operator allows the user to store the logs of both incoming and outgoin g calls in the database. The <Run> menu cons ists of submenus as shown below: Category Description S tatistics Displays simple statistical dat a. T otal Log Displays detailed information on all calls. Inbound Calls Log Displays detailed ...

  • Samsung OfficeServ - page 86

    80 T ypically , all logs are displayed in a descending order . When clicking a column header in a specific row of each log screen, the logs are sorted in an ascending or descendi ng order . Retrieving Logs Retrieving Statistical Logs Follow the step s below to retrieve statistical logs. 1 Select the [S tatistics] menu from the [Run] to see the < ...

  • Samsung OfficeServ - page 87

    81 Retrieving All Logs Follows the steps below to retrieve all logs. 1 Select the [T otal Log] menu from the [Run] to see the <T otal Log> window . 2 Enter the start time and end time for retrieving logs. Click [Run] to s ee the search results within the time period. 3 Click the scroll button to see a specific calling list. Also, the user may ...

  • Samsung OfficeServ - page 88

    82 4 Sort out the calling list by column by clicking the head ers of the list to retrieve the call log. The window below sh ows the example of sorting out the list by the phone numb er column. Retrieving Inbound Calls Logs Follow the step s below to retrieve inbound call s logs. 1 Select the [Inbound Calls Log] menu from the [Run] to see the <In ...

  • Samsung OfficeServ - page 89

    83 2 Enter th e start time and end time for retrieving logs. Cli ck [Run] to see the search results within the time period. Retrieving Outbound Calls Logs Follow the step s below to retrieve outbound calls logs. 1 Select the [Outbound Calls Log] menu from the [Run] to see the <Outbound Calls Log> window . 2 Enter the start time and end time f ...

  • Samsung OfficeServ - page 90

    84 Retrieving Station Calls Logs Follow the step s below to retrieve statio n calls logs. 1 Select the [S tation Calls Log] menu from the [Run] to see the <S tation Calls Log> window . 2 Enter the start time and end time for retrieving logs. Click [Run] to see the search results within the time period. Retrieving DID Logs Follow the step s to ...

  • Samsung OfficeServ - page 91

    85 Retrieving CID Logs Follow the step s below to retrieve CID logs. 1 Select the [CID Log] menu from the [Run] to see the <CID Log> window . 2 Enter the start time and end time for retrieving logs and DID No./Name. 3 Click [Run] to see the log retrieval results for the DID No. or DID name within the time period. Retrieving Logs for Each Tran ...

  • Samsung OfficeServ - page 92

    86 ANNEX B. Importing/Exporting Excel Files This Annex describes the procedures fo r importing phone number dat a in an Excel file into the OfficeServ Operator phone book, or for exporting the phone book to an Excel file. Importing Excel Files The OfficeSe rv Operator allows the user to import the phone number data in an Excel file format into Offi ...

  • Samsung OfficeServ - page 93

    87 3 In the window below , click the [Index] button to select the Excel file to import. Click the [Next>] button. 4 Select the worksheet to import from the window below , and click the [Next>] button. When selecting a worksheet, some dat a of the worksheet are displayed. ...

  • Samsung OfficeServ - page 94

    88 5 Select the range of the Excel Sheet to import, and click the [Next>] button. If the whole worksheet is required to import, select [Whole]. If the p artial worksheet is required t o import, select [Partial]. Then, set the range. The windo w below shows the range of a selected worksheet ranging from the 1st line of the A column to the 10 th l ...

  • Samsung OfficeServ - page 95

    89 7 In the window below , select the phone book table where th e imported data will be stored, and click the [Next>] button. When the user want s to store the data in a new table, check the New T able, and enter the name of the ne w tabl e. When the user wants to sto re the data in the existing t able, check the Existing T able, and select one ...

  • Samsung OfficeServ - page 96

    90 Exporting Phone Book Data to an Excel File Follow the step s below to export phone book dat a to an Excel file. 1 Select the [Import/Export Excel Files] from the [T ools] in the main window of the OfficeServ Operator to see the [Excel Import/Export Wizard] window . 2 Select the PBook.mdb from the phone book files, and click the [Impo rt] button. ...

  • Samsung OfficeServ - page 97

    91 5 When the dialog box below prompts the user to confirm the selection, click the [Finish] button. 6 Once the import of the Excel data is successfully completed, the messag e below is displayed: ...

  • Samsung OfficeServ - page 98

    92 ABBREVIATION B BLF Busy Lamp Field C CBK Call Back CD Comp act Disk CID Caller Identification CLIP Calling Line Identification Presentation CPU Central Processor Unit CRL Clear (Ring Plan) CTI Computer T e lephony Interface D DB Dat abase DID Direct Inward Dialing DND Do Not Disturb DS Direct S tation DT Direct T runk M MMC Man Machine Command M ...

  • Samsung OfficeServ - page 99

    93 Software License Agreement & Limited Warranty For OfficeServ CTI Applications for iDCS Keyphone Series IMPORTANT, READ CAREFULLY This Samsung End-User License Agreem ent (EULA) is a legal binding agreement between you (either an individual or an entity) and Samsung for Samsung software product identif ied above, which inclu des computer soft ...

  • Samsung OfficeServ - page 100

    94 h. T ermination: Without prejudice to any other rights, Sa msung may terminate this agreement if you fail to comply with the terms a nd condition of this agreement. In such event, you must destroy all copies of the SOFTWARE and all of its component parts. 2. SOFTWARE ACTIVA TION Software Activation; Samsung will pr ovide a software ac tiv ation ...

Manufacturer Samsung Category Wireless Office Headset

Documents that we receive from a manufacturer of a Samsung OfficeServ can be divided into several groups. They are, among others:
- Samsung technical drawings
- OfficeServ manuals
- Samsung product data sheets
- information booklets
- or energy labels Samsung OfficeServ
All of them are important, but the most important information from the point of view of use of the device are in the user manual Samsung OfficeServ.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Samsung OfficeServ, service manual, brief instructions and user manuals Samsung OfficeServ. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Samsung OfficeServ.

Similar manuals

A complete manual for the device Samsung OfficeServ, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Samsung OfficeServ by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Samsung OfficeServ.

A complete Samsung manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Samsung OfficeServ - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Samsung OfficeServ, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Samsung OfficeServ, that we can find in the current document
3. Tips how to use the basic functions of the device Samsung OfficeServ - which should help us in our first steps of using Samsung OfficeServ
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Samsung OfficeServ
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Samsung OfficeServ in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Samsung OfficeServ?

Use the form below

If you did not solve your problem by using a manual Samsung OfficeServ, ask a question using the form below. If a user had a similar problem with Samsung OfficeServ it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)