English dropdown-ico

Manual Cisco Systems UCS C210

104 pages 8.94 mb
Download

Go to site of 104

Summary
  • Cisco Systems UCS C210 - page 1

    Americas Headquarters Cisco Systems, In c. 170 West Tasman Drive San Jose, CA 951 34-1706 USA http://www.ci sco.com Tel: 408 526-4000 800 553-NETS (638 7) Fax: 408 527-0883 Cisco U CS C21 0 S er v er Installation and S er vice Guide Cov ers UCS C21 0 Server Generations M1 and M2 Ju ly 31, 20 13 Text Part Number: OL -20887-02 ...

  • Cisco Systems UCS C210 - page 2

    THE SPECIFICATION S AND INFORMATION REGARDING TH E PRODUCTS IN TH IS MANUAL A RE SUBJECT TO CHAN GE WITHOUT NOT ICE. ALL STATEMENTS , INFORMATION, AND RECOMMENDATI ONS IN THI S MANUAL ARE BE LIEVED TO BE A CCURATE BUT ARE PRESENTED WI THOUT WARRANTY OF ANY KIND, EX PRESS OR IMPLIED. USERS MUST TAKE FULL RESPO NSIBILITY FOR THEIR APPLICATION OF ANY ...

  • Cisco Systems UCS C210 - page 3

    iii Cisco UCS C210 Server Insta llation and Service Guide OL-20887-02 CONTENTS Preface vii Related Documentation vii Audience vii Organization vii Conventi ons viii Obtaining Documentation and Submitting a Serv ice Request xiii CHAPTER 1 Overview 1-1 CHAPTER 2 Installing the Server 2-1 Unpacking and Inspecting the Server 2-2 Preparing for Installat ...

  • Cisco Systems UCS C210 - page 4

    Contents iv Cisco UCS C210 Server Insta llation and Service Guide OL-20887-02 Status LEDs 3-2 Front Panel LEDs 3-2 Rear Panel LEDs 3-4 Preparing for Component Installa tion 3-7 Required Equipment 3-7 Shutting Down and Powering Off the Server 3-8 Removing and Replacing the Server in a Rack 3-9 Removing and Replacing the Server Top Co ver 3-10 Removi ...

  • Cisco Systems UCS C210 - page 5

    Contents v Cisco UCS C210 Server Insta llation and Service Guide OL-20887-02 APPENDIX B Cable and Power Co rd Specifications B-1 KVM Cable B-1 Supported Powe r Cords and Plugs B-2 AC Power Cord Illustrations B-3 APPENDIX C RAID Controller Con siderations C-1 Supported RAID Controllers and Required Cabl es C- 1 Enabling the Integrated In tel ICH1 0R ...

  • Cisco Systems UCS C210 - page 6

    Contents vi Cisco UCS C210 Server Insta llation and Service Guide OL-20887-02 ...

  • Cisco Systems UCS C210 - page 7

    vii Cisco UCS C210 Server Insta llation and Service Guide OL-20887-02 Preface This preface describes the audience, organization, and con ventions of the Cisco UCS C210 Server Installation and Service Gui de . It also provides in formation on ho w to obtain related documen tation. This guide co vers UCS C210 Serv er Generations M1 and M2. Difference ...

  • Cisco Systems UCS C210 - page 8

    viii Cisco UCS C210 Server Insta llation and Service Guide OL-20887-02 Conventions This document uses the f ollo wing con ventions for notes, cautions, and safety w arnings. Notes and Cautions contain important in formation that you should k now . Note Means r eader take no te . Notes c ontain he lpful sugg estions or references to mate rial that a ...

  • Cisco Systems UCS C210 - page 9

    ix Cisco UCS C210 Server Insta llation and Service Guide OL-20887-02 V aroitus TÄRKEITÄ TURVALLISUUSOHJEIT A Tämä varoitusmerkki merkitsee vaaraa. T ilanne voi aiheuttaa ruumiillisia vam moja. Ennen kuin käsittelet laitteistoa, huomioi sähköpiirien käsittelemisee n liittyvät riskit ja tutustu onnettomuuksien yl eisiin ehkäisytapoihin. T u ...

  • Cisco Systems UCS C210 - page 10

    x Cisco UCS C210 Server Insta llation and Service Guide OL-20887-02 Avis o INSTRUÇÕES IMPORT ANTES DE SEGURANÇA Este símbolo de aviso significa perigo. V ocê está em uma situação que poderá ser causadora de lesões corporais. Antes de iniciar a utilização de qualquer equipamento, tenha conh ecimento dos perigos envolvidos no manuseio de ...

  • Cisco Systems UCS C210 - page 11

    xi Cisco UCS C210 Server Insta llation and Service Guide OL-20887-02 Avis o INSTRUÇÕES IMPORT ANTES DE SEGURANÇA Este símbolo de aviso significa perigo. V ocê se encontra em uma situação em que há risco de le sões corporais. Antes de trabalhar com qualquer equipam ento, esteja ciente dos riscos que envolvem os circuitos elétricos e famili ...

  • Cisco Systems UCS C210 - page 12

    xii Cisco UCS C210 Server Insta llation and Service Guide OL-20887-02 ...

  • Cisco Systems UCS C210 - page 13

    xiii Cisco UCS C210 Server Insta llation and Service Guide OL-20887-02 Obtaining Documentation and Submitting a Service Request For info rmation on obtaining documentation, sub mitting a service request, and gatheri ng additional information, see the mont hly What’ s New in Cisco Pr oduct Documentation , which also li sts all ne w and re vised Ci ...

  • Cisco Systems UCS C210 - page 14

    xiv Cisco UCS C210 Server Insta llation and Service Guide OL-20887-02 ...

  • Cisco Systems UCS C210 - page 15

    CH A P T E R 1-1 Cisco UCS C210 Server Installation and Service Guide OL-20887-02 1 Overview The Cisco UCS C210 Server , which is a part of the Cisco UCS C-Series Rack-Mount Server f amily , operates in a wide range of data center en vironmen ts, including those en vironments that use the Cisco Unified Comp uting System, Cisco Nex us family prod uc ...

  • Cisco Systems UCS C210 - page 16

    1-2 Cisco UCS C210 Server Insta llation and Service Guide OL-20887-02 Chapter Figur e 1 -2 Rear P anel Featur es The Cisco UCS C210 server h as the follo wing hardware compon ents and features: . 1 Pow er supply (up to tw o) 2 USB 2.0 connectors (two) 3 10/100 Ethernet management port (RJ45) 4 Serial connector (DB9) 5 V ideo connector (DB15 V GA) 6 ...

  • Cisco Systems UCS C210 - page 17

    1-3 Cisco UCS C210 Server Installation and Service Guide OL-20887-02 Chapter Disk Management Factory-conf igured RAID 5 support opt ions: • RAID 0 and 1 suppo rt for up to fi ve SA T A driv es w ith the integrated SA T A controller . Note The integrated ICH1 0R RAID controller is not compatible for use with VMW are ESX/ESXi Server softwa re in an ...

  • Cisco Systems UCS C210 - page 18

    1-4 Cisco UCS C210 Server Insta llation and Service Guide OL-20887-02 Chapter See the “T echnical Specifications” section on page A-1 for more physical, en vironmental, and po wer details. 1. DIMM = dual inline memory module 2. DDR = double data rate (transfer mode) 3. SAS = serial attached SCSI 4. SATA = serial advanced technology attachment 5 ...

  • Cisco Systems UCS C210 - page 19

    CH A P T E R 2-1 Cisco UCS C210 Server Installation and Service Guide OL-20887-02 2 Installing the Server This chapter describes how to install the server and includes the follo wing sections: • Unpacking and Inspecting t he Server , page 2-2 • Preparing for Installation , page 2-3 • Installing the Server Into a Rack, page 2-5 • Initial Ser ...

  • Cisco Systems UCS C210 - page 20

    2-2 Cisco UCS C210 Server Insta llation and Service Guide OL-20887-02 Chapter Unpacking and Inspecting the Server Ti p Keep the shipping container in case the se rver requires sh ipping in the future. Note The chassis is thoroughly inspected before shipment . If any damage occurred du ring transportation or any items are mi ssing, contact your cust ...

  • Cisco Systems UCS C210 - page 21

    2-3 Cisco UCS C210 Server Installation and Service Guide OL-20887-02 Chapter Preparing for Installation This section includes the following topics: • Installation Guidelines, p age 2-3 • Rack Requirements, page 2-4 • Required Equipment , page 2-4 • Slide Rail Adjustment Range, pag e 2-4 Installation Guidelines War ni ng T o prevent the sy s ...

  • Cisco Systems UCS C210 - page 22

    2-4 Cisco UCS C210 Server Insta llation and Service Guide OL-20887-02 Chapter Rack Requirements This section provides the requirem ents for the standard open racks, assuming an e xternal ambient air temperature range of 32 to 95 ° F ( 0 to 35 ° C). The rack must be of the follo wing type: • Standard 19-inch (48.3 -cm) wide, four-p ost EIA rack, ...

  • Cisco Systems UCS C210 - page 23

    2-5 Cisco UCS C210 Server Installation and Service Guide OL-20887-02 Chapter Installing the Server Into a Rack The qualified and supported part numbers for this comp onent are subject to change o ver time. For the most up-to-date list of replaceable components, se e the follo w ing URL and then scroll to T echnical Specif ications : http://www .cis ...

  • Cisco Systems UCS C210 - page 24

    2-6 Cisco UCS C210 Server Insta llation and Service Guide OL-20887-02 Chapter Figur e 2-2 Attac hing a Sl ide-Rail Assembly Note The mounting pegs th at protrude through t he rack-post holes are designed to f it round or square #12-24 holes, or #10-32 holes when t he mounting pe g is compressed (see Figure 2-3 ). If your rack has # 10-32 rack-post ...

  • Cisco Systems UCS C210 - page 25

    2-7 Cisco UCS C210 Server Installation and Service Guide OL-20887-02 Chapter d. Attach the second slide-rail assemb ly to the opposite side of the rack. En sure that the two slide-rail assemblies are lev el and at the same height with each other . e. Pull the inner slide ra ils on each assembly out tow ard the rack front until the y hit the interna ...

  • Cisco Systems UCS C210 - page 26

    2-8 Cisco UCS C210 Server Insta llation and Service Guide OL-20887-02 Chapter b. Push the serv er into the slide rails unti l it stops at the internal stops. c. Push the plastic in stallation rel ease clip on each mounting bracket to ward the server rear (see item 5 in Figure 2-4 ), and then continue pushing th e server into the rack until its fron ...

  • Cisco Systems UCS C210 - page 27

    2-9 Cisco UCS C210 Server Installation and Service Guide OL-20887-02 Chapter Initial Server Setup This section contains the following topics: • Connecting and Po wering On the Serv er (Standalone Mode), page 2-9 • NIC Modes and NIC Redundanc y Settings, page 2-12 Connecting and Powering On the Server (Standalone Mode) Note This section describe ...

  • Cisco Systems UCS C210 - page 28

    2-10 Cisco UCS C210 Server Insta llation and Service Guide OL-20887-02 Chapter Step 2 Use the supplied KVM cable to connect a keyboard and VGA monito r to the console connector on the front panel (see Figure 1-1 on page 1-1 ). Note Alternati vely , you can use the VGA and USB por ts on th e rear panel. Ho we ver , you cannot use the front panel con ...

  • Cisco Systems UCS C210 - page 29

    2-11 Cisco UCS C210 Server Installation and Service Guide OL-20887-02 Chapter d. Use this utility to change the NIC redundancy to your preference. This server has three possible NIC redundanc y settings: – None—The Ethernet ports operate independent ly and do not f ail ov er if there is a problem. – Acti ve-standby —If an acti ve Ethernet p ...

  • Cisco Systems UCS C210 - page 30

    2-12 Cisco UCS C210 Server Insta llation and Service Guide OL-20887-02 Chapter NIC Modes and NIC Redundancy Settings This server h as the follo wing NIC mode settings th at you can choose from: • Dedicated—The 10/100 management por t is used to access the CIMC. Y ou hav e to select a NIC redundanc y and IP setting. • Shared LOM (def ault)—T ...

  • Cisco Systems UCS C210 - page 31

    2-13 Cisco UCS C210 Server Installation and Service Guide OL-20887-02 Chapter System BIOS and CIMC Firmware This section contains information about the system BIOS and it includes the f ollowing sections: • Updating the BIOS and CIMC Firmware, page 2-13 • Accessing the System BIOS, page 2-1 4 Updating the BIOS and CIMC Firmware Caution When you ...

  • Cisco Systems UCS C210 - page 32

    2-14 Cisco UCS C210 Server Insta llation and Service Guide OL-20887-02 Chapter Accessing the System BIOS Y ou can change the BIOS settings for your server by using t he procedure in this section. D etailed instructions ar e also printed on the BI OS screens. Step 1 Enter the BIOS setup utility by pressing the F2 key wh en prompted during boo tup. N ...

  • Cisco Systems UCS C210 - page 33

    2-15 Cisco UCS C210 Server Installation and Service Guide OL-20887-02 Chapter Motherboard Jumpers These jumpers are adjacent to the CMOS battery (see Figure 2-6 on page 2-15 ). This section cont ains the following topics: • Using the BIOS Recovery Jumper J1 E5 to Recov er Corrupt BIOS, page 2-16 • Clearing the CIMC Admin P assword Using Jum per ...

  • Cisco Systems UCS C210 - page 34

    2-16 Cisco UCS C210 Server Insta llation and Service Guide OL-20887-02 Chapter Using the BIOS Recovery Jumper J1E5 to Recover Corrupt BIOS This jumper is adjacent to the CMOS battery (see Figure 2-6 on page 2-1 5 ). Y ou can use this jumper to force the server to flash a ne w B IOS, in the case of a system hang. For e xample, if the system hangs af ...

  • Cisco Systems UCS C210 - page 35

    2-17 Cisco UCS C210 Server Installation and Service Guide OL-20887-02 Chapter Clearing the CIMC Admin Pa ssword Using Jumper J45 This procedure describes ho w to clear the CIMC admin password back to the d efault in case the user-selected password is lost o f forgotten. Step 1 Po wer of f the server as described in th e “Shutting Do wn and Po wer ...

  • Cisco Systems UCS C210 - page 36

    2-18 Cisco UCS C210 Server Insta llation and Service Guide OL-20887-02 Chapter Using the Clear CMOS Jumper J1E6 Y ou can use this jumper (see Figure 2-6 on page 2- 15 ) to clear the server’ s CMOS settings in the case of a system hang. F or example, i f the server hangs because o f incorrect settings and does not boot, use t his jumper to in vali ...

  • Cisco Systems UCS C210 - page 37

    2-19 Cisco UCS C210 Server Installation and Service Guide OL-20887-02 Chapter Clearing the BIOS Admin Pa ssword Using Jumper J1E4 This procedure describes ho w to clear the BIOS admin passw ord for the BIOS back to the def ault in case the user-selected passw ord is lost of for gotten. Step 1 Po wer of f the server as described in th e “Shutting ...

  • Cisco Systems UCS C210 - page 38

    2-20 Cisco UCS C210 Server Insta llation and Service Guide OL-20887-02 Chapter ...

  • Cisco Systems UCS C210 - page 39

    CH A P T E R 3-1 Cisco UCS C210 Server Installation and Service Guide OL-20887-02 3 Maintaining the Server This chapter describe s how to diagnose hardware problems with status LEDs and ho w to install or replace hardware compon ents, and includes the follo wing sections: • Server Moni toring and Managemen t T ools, page 3-1 • Status LEDs, page ...

  • Cisco Systems UCS C210 - page 40

    3-2 Cisco UCS C210 Server Insta llation and Service Guide OL-20887-02 Chapter Status LEDs This section describes the locat ions and interpretation s of LEDs on the server that can provide status and troubleshooting info rmation. This section includes the follo wing topics: • Front Panel LEDs, page 3-2 • Rear Panel LEDs, page 3-4 Front Panel LED ...

  • Cisco Systems UCS C210 - page 41

    3-3 Cisco UCS C210 Server Installation and Service Guide OL-20887-02 Chapter System fault • Green—The server is oper ating properly . • Amber , blinking—An e vent th at requires a service action has been detected. In vestigate oth er LEDs and logs to isol ate the problem. Power status • Off —No A C power is pres ent. • Blinking green? ...

  • Cisco Systems UCS C210 - page 42

    3-4 Cisco UCS C210 Server Insta llation and Service Guide OL-20887-02 Chapter Rear Panel LEDs Figure 3-2 sho w s the names and locat ions of the rear panel LEDs. Figur e 3-2 Rear P anel LEDs Ta b l e 3-2 describes the possible states and interp retations for the LEDs that ar e sho wn in Figure 3-2 . 1 Pow er supply fault LED 2 Rear Locator LED 3 10 ...

  • Cisco Systems UCS C210 - page 43

    3-5 Cisco UCS C210 Server Installation and Service Guide OL-20887-02 Chapter Ta b l e 3-2 Rear P anel LEDs LED Name State Pow er supply fault • Off —No A C power is present in an y po wer supplies. • Green—This po wer supply is operat ing properly in main po wer mode. • Green, blinking—This po wer supply is operating properly in standby ...

  • Cisco Systems UCS C210 - page 44

    3-6 Cisco UCS C210 Server Insta llation and Service Guide OL-20887-02 Chapter Note The 10/100/1000 Giga bit Ethernet link status LED and the speed LED must be read in combination fo r the follo wing interpretations. 10/100/1000 Gi gabit Ethernet link stat us (right) 10/100/1000 Gi gabit Ethernet speed (left) • Right of f + left off—N o link is ...

  • Cisco Systems UCS C210 - page 45

    3-7 Cisco UCS C210 Server Installation and Service Guide OL-20887-02 Chapter Preparing for Component Installation This section describes how to prepare the server fo r component installation or replacement and includes the following t opics: • Required Equipment , page 3-7 • Shutting Do wn and Powerin g Of f the Server , page 3-8 • Removing a ...

  • Cisco Systems UCS C210 - page 46

    3-8 Cisco UCS C210 Server Insta llation and Service Guide OL-20887-02 Chapter Shutting Down and Powering Off the Server Ti p If you hav e ordered a server with po wer supply redundancy (at least tw o po wer supplies), you do n ot hav e to po wer off the serv er to replace a power s upply because the y are redundant and hot-pluggable. The server har ...

  • Cisco Systems UCS C210 - page 47

    3-9 Cisco UCS C210 Server Installation and Service Guide OL-20887-02 Chapter Removing and Replacing the Server in a Rack T o remove or replace the serv er in a rack, follo w these steps: Ti p Y ou do not hav e to remov e the server from the rack if you can sli de it forward enough to remov e the top cov er and safely view and access the internal co ...

  • Cisco Systems UCS C210 - page 48

    3-10 Cisco UCS C210 Server Insta llation and Service Guide OL-20887-02 Chapter Removing and Replacing the Server Top Cover T o remove or replace the top co ver of the server , follow these steps: War ni ng This unit might have more than one power cord. T o reduce the risk of electric shock, disconnect the two power supply cords before servicing the ...

  • Cisco Systems UCS C210 - page 49

    3-11 Cisco UCS C210 Server Installation and Service Guide OL-20887-02 Chapter Removing and Replacing the Server Front Cover Note It is not necessary to remove the front cov er unle ss ins tructed to do so in a replacement procedure. T o remove or replace the front cov er of the server , follow these steps: Step 1 Re move a f ro nt cove r: a. Remov ...

  • Cisco Systems UCS C210 - page 50

    3-12 Cisco UCS C210 Server Insta llation and Service Guide OL-20887-02 Chapter Replaceable Component Locations This section sho ws the locations of the components that are discussed in this chapter . The view in Figure 3-5 is from the top down, with the top cover and intern al air baffle removed. Figur e 3-5 Replaceable Component Locations (top vie ...

  • Cisco Systems UCS C210 - page 51

    3-13 Cisco UCS C210 Server Installation and Service Guide OL-20887-02 Chapter Installing or Replacing Components War ni ng This unit might have m ore than one power cord. T o reduce the risk of electric sho ck, disconnect the two power supply cords before servicing the unit. Statement 14 War ni ng Blank faceplates and c over panels serve three impo ...

  • Cisco Systems UCS C210 - page 52

    3-14 Cisco UCS C210 Server Insta llation and Service Guide OL-20887-02 Chapter Installing Hard Drives and Solid State Drives The qualified and supported part numbers for this comp onent are subject to change o ver time. For the most up-to-date list of replaceable components, se e the follo w ing URL and then scroll to T echnical Specif ications : h ...

  • Cisco Systems UCS C210 - page 53

    3-15 Cisco UCS C210 Server Installation and Service Guide OL-20887-02 Chapter T o replace or install a ho t-pluggable hard driv e or SSD , follo w these steps: Step 1 Remov e the driv e that you are replacing or re move a blank panel from an empty bay (see Figure 3-7 ): a. Press the release button to expose the ejector le ver . b. Pull the e jector ...

  • Cisco Systems UCS C210 - page 54

    3-16 Cisco UCS C210 Server Insta llation and Service Guide OL-20887-02 Chapter Installing Power Supplies The qualified and supported part numbers for this comp onent are subject to change o ver time. For the most up-to-date list of replaceable components, se e the follo w ing URL and then scroll to T echnical Specif ications : http://www .cisco.com ...

  • Cisco Systems UCS C210 - page 55

    3-17 Cisco UCS C210 Server Installation and Service Guide OL-20887-02 Chapter Installing a DVD Drive The qualified and supported part numbers for this comp onent are subject to change o ver time. For the most up-to-date list of replaceable components, se e the follo w ing URL and then scroll to T echnical Specif ications : http://www .cisco.com/en/ ...

  • Cisco Systems UCS C210 - page 56

    3-18 Cisco UCS C210 Server Insta llation and Service Guide OL-20887-02 Chapter g. Replace the server in the rack, replace power co rds and an y other cables, and then po wer on the server b y pressing the Pow er button. Figur e 3-9 Removing and Replacing a D VD driv e 1 D VD drive ( shown with serv er front cov er re move d) 2 D VD drive scre ws (t ...

  • Cisco Systems UCS C210 - page 57

    3-19 Cisco UCS C210 Server Installation and Service Guide OL-20887-02 Chapter Installing a Fan Tray The qualified and supported part numbers for this comp onent are subject to change o ver time. For the most up-to-date list of replaceable components, se e the follo w ing URL and then scroll to T echnical Specif ications : http://www .cisco.com/en/U ...

  • Cisco Systems UCS C210 - page 58

    3-20 Cisco UCS C210 Server Insta llation and Service Guide OL-20887-02 Chapter Figur e 3-1 0 Removing and Replacing a F an T ray 1 Fan t ray 2 Fan tray securing scre ws (two on each side) 2 1 195921 ...

  • Cisco Systems UCS C210 - page 59

    3-21 Cisco UCS C210 Server Installation and Service Guide OL-20887-02 Chapter Installing DIMMs This section includes the following sections: • Memory Performance Guideli nes and Population Rules, page 3-21 • DIMM Installation Pr ocedure, page 3-24 Note T o ensure the best server p erformance, it is important that you are f a miliar with memory ...

  • Cisco Systems UCS C210 - page 60

    3-22 Cisco UCS C210 Server Insta llation and Service Guide OL-20887-02 Chapter Figur e 3-1 1 Ph ysical Repr esentati on of Banks and Channels Figure 3-12 sho ws a logical represen tation of the c han nels and banks associated with each CPU. Figur e 3-12 Logical Representation of Channels and Banks CPU2 CPU1 F1 F2 D1 D2 E1 E2 A2 A1 C2 C1 B2 B1 Front ...

  • Cisco Systems UCS C210 - page 61

    3-23 Cisco UCS C210 Server Installation and Service Guide OL-20887-02 Chapter Memory Population Rules When considering the memory co nfiguratio n of your server , you should con sider the follo w ing items: • DIMMs within the serv er should all be the same type, speed, and size. Do not mix different sized DIMMs or DIMMs with different clock rates ...

  • Cisco Systems UCS C210 - page 62

    3-24 Cisco UCS C210 Server Insta llation and Service Guide OL-20887-02 Chapter Memory Mirroring and RAS • The CPUs support memory mirrori ng only when Channels A and B on CPU 1 are populated w ith DIMMs that are identical in conf iguration, s ize, and speed. Do not populate ch annel C. If three channels are populated with DIMMs, memory mirroring ...

  • Cisco Systems UCS C210 - page 63

    3-25 Cisco UCS C210 Server Installation and Service Guide OL-20887-02 Chapter Figur e 3-13 Removing and Replacing Memory Modules 1 DIMM slots (12) 2 DIMM slot ejector lev er (two on each slot) 3 Alignment k ey in DIMM sl ot 195922 1 2 3 ...

  • Cisco Systems UCS C210 - page 64

    3-26 Cisco UCS C210 Server Insta llation and Service Guide OL-20887-02 Chapter Installing CPUs and Heatsinks The qualified and supported part numbers for this comp onent are subject to change o ver time. For the most up-to-date list of replaceable components, se e the follo w ing URL and then scroll to T echnical Specif ications : http://www .cisco ...

  • Cisco Systems UCS C210 - page 65

    3-27 Cisco UCS C210 Server Installation and Service Guide OL-20887-02 Chapter f. Loosen the tw o capti ve scr ews th at hold the heatsink t o the chassis posts and lift th e heatsink out of the server (see Figure 3-14 ). g. If you plan to use this heatsink with you r new CPU, clean the old thermal compound from the bot tom of the heatsink . h. Unho ...

  • Cisco Systems UCS C210 - page 66

    3-28 Cisco UCS C210 Server Insta llation and Service Guide OL-20887-02 Chapter Figur e 3-14 Removing and Replac ing C PUs and Heatsinks 1 Capti ve heatsink scre ws (two per CPU) 2 CPU cover plate (open) 3 CPU socket alignment keys (tw o) 4 CPU socket latch ( open) 195923 1 4 2 3 1 ...

  • Cisco Systems UCS C210 - page 67

    3-29 Cisco UCS C210 Server Installation and Service Guide OL-20887-02 Chapter Installing a Motherboard CMOS Battery War ni ng There is danger of explosion if the battery is replaced i ncorrectly . Replace the battery only w ith the same or equivalent type rec ommended by the manufacturer . Dispose of used batteries according to the manufacturer’ ...

  • Cisco Systems UCS C210 - page 68

    3-30 Cisco UCS C210 Server Insta llation and Service Guide OL-20887-02 Chapter Figur e 3-15 Removing and Replacing a Motherboar d CMOS Batt ery Installing a Trusted Platform Module (TPM) The qualified and supported part numbers for this comp onent are subject to change o ver time. For the most up-to-date list of replaceable components, se e the fol ...

  • Cisco Systems UCS C210 - page 69

    3-31 Cisco UCS C210 Server Installation and Service Guide OL-20887-02 Chapter Step 2 Install a TPM: a. Align the connector that is on the undersid e of the ne w TPM with motherboard sock et JP2, and then press f irmly on both ends of the TPM to press the connector into the socket. b. Replace the securing screw that holds the TPM to the motherboard ...

  • Cisco Systems UCS C210 - page 70

    3-32 Cisco UCS C210 Server Insta llation and Service Guide OL-20887-02 Chapter On the BIOS utility screen, select the Security tab, then select Set Administrator Passw ord . Use the pop-up box es to set the BIOS administrat or password, then p ress F10 to sa ve your settings and reboot the serv er . f. W atch during bootup for the F2 promp t, and t ...

  • Cisco Systems UCS C210 - page 71

    3-33 Cisco UCS C210 Server Installation and Service Guide OL-20887-02 Chapter b. Set the assembly in place, alig ning the riser cards with the PCIe slots on the motherboard. c. Press down e venly on both en ds of the assembly to fully engage the riser cards with the PCIe slots on the motherb oard. Note Older servers hav e a screw that secures the P ...

  • Cisco Systems UCS C210 - page 72

    3-34 Cisco UCS C210 Server Insta llation and Service Guide OL-20887-02 Chapter Replacing a PCIe Card This section contains the following topics: • Replacing a PCIe Card, page 3- 34 • Special Considerations for the Cisco UCS P 81E V irtual Interface Card (N2XX-A CPCI01), page 3-37 • Installing Multiple PCIe Cards an d Resolvin g Limited Resour ...

  • Cisco Systems UCS C210 - page 73

    3-35 Cisco UCS C210 Server Installation and Service Guide OL-20887-02 Chapter Note Older servers hav e a screw that secures the PCIe riser to the rear of the chassis, but newer serv ers do not ha ve this scre w . If your server has the scre w , continue with the ne xt step to remo ve it. If your server does not ha ve this scre w , skip to Step f. e ...

  • Cisco Systems UCS C210 - page 74

    3-36 Cisco UCS C210 Server Insta llation and Service Guide OL-20887-02 Chapter Figur e 3-19 Removing and Replacing a PCIe Card 1 Riser card assembly removed from chassis (top view ) 2 Riser card 3 PCIe card 4 PCIe card rear plate 5 PCIe card securing screw (attaches to assembly) 195926 5 1 2 3 4 ...

  • Cisco Systems UCS C210 - page 75

    3-37 Cisco UCS C210 Server Installation and Service Guide OL-20887-02 Chapter Special Considerations for the Cisco UCS P81E Virtual Interface Card (N2XX-ACPCI01) The Cisco UCS P81E V irtual Interface Card is a standa rd-profile, half-length, du al-port 10 Gb PCI e card with SFP+. See the follo wing special considerations and prerequisites. • This ...

  • Cisco Systems UCS C210 - page 76

    3-38 Cisco UCS C210 Server Insta llation and Service Guide OL-20887-02 Chapter Installing Multiple PCIe Cards and Resolving Limited Resources When a large number of PCIe add- on cards are installed in the serv er, the sy stem may run out of t he following resources r equired for PCIe devices: • Option ROM memory space • 16-bit I/O space The top ...

  • Cisco Systems UCS C210 - page 77

    3-39 Cisco UCS C210 Server Installation and Service Guide OL-20887-02 Chapter Resolving Insufficient 16-Bit I/O Space The system has only 64 KB of legacy 16-bit I/O resour ces availab le. This 64 KB of I/O space is divided between the CPUs in the sys tem because the PCIe co ntroller is integrated into t he CPUs. This server BIOS has the capability ...

  • Cisco Systems UCS C210 - page 78

    3-40 Cisco UCS C210 Server Insta llation and Service Guide OL-20887-02 Chapter Replacing a SAS Extender or SAS Expander This server has tw o factory-conf igurable options fo r hard dri ve backplane connection: the SAS extender or the SAS expander . Note The extender and the e xpande r are fi eld-replaceable, bu t you cannot upgrade an e xtender to ...

  • Cisco Systems UCS C210 - page 79

    3-41 Cisco UCS C210 Server Installation and Service Guide OL-20887-02 Chapter Replacing a SAS Extender or SAS Expander Card T o replace a SAS extender or SAS expander , follow these steps: Step 1 Remov e a SAS extender or SAS expander card: a. Po wer of f the server as described in the “Sh utting Do wn and Powerin g Of f the Serve r” section on ...

  • Cisco Systems UCS C210 - page 80

    3-42 Cisco UCS C210 Server Insta llation and Service Guide OL-20887-02 Chapter Replacing an LSI MegaRAID Battery Backup Unit When you install an LSI Me gaRAID card and the optional BBU in this serv er, do no t install the BBU on top of the card as described in t he LSI instructions. T o av oid overheatin g the card, you must install the BBU on a sp ...

  • Cisco Systems UCS C210 - page 81

    3-43 Cisco UCS C210 Server Installation and Service Guide OL-20887-02 Chapter Figur e 3-22 Removing and Replacing an LSI BBU 1 Cable access opening 2 Securing screws (three) 3 BBU (connector J2 is on the underside) 4 BB U bracket on po wer supply bay 196989 1 4 2 3 ...

  • Cisco Systems UCS C210 - page 82

    3-44 Cisco UCS C210 Server Insta llation and Service Guide OL-20887-02 Chapter Installing a Mezzanine Card The qualified and supported part numbers for this comp onent are subject to change o ver time. For the most up-to-date list of replaceable components, se e the follo w ing URL and then scroll to T echnical Specif ications : http://www .cisco.c ...

  • Cisco Systems UCS C210 - page 83

    3-45 Cisco UCS C210 Server Installation and Service Guide OL-20887-02 Chapter Figur e 3-23 Removing and Replacing a Mezzanine Car d 1 Mezzanine card retaining posts (three) 2 Mezzanine card 195970 2 1 ...

  • Cisco Systems UCS C210 - page 84

    3-46 Cisco UCS C210 Server Insta llation and Service Guide OL-20887-02 Chapter ...

  • Cisco Systems UCS C210 - page 85

    A-1 Cisco UCS C210 Server Insta llation and Service Guide OL-20887-02 APPENDIX A Technical Specifications This appendix lists t he technical specif ications for the Cisco UCS C210 M1 server and in cludes the follo wing sections: • Physical Specif ications, page A-1 • En v ironmental Specifications, pa ge A-2 • Po wer Specifications, page A-2 ...

  • Cisco Systems UCS C210 - page 86

    A-2 Cisco UCS C210 Server Installation and Service Guide OL-20887-02 Appendix Environmental Specifications Ta b l e A-2 lists the en vironmental sp ecifications for the server . Power Specifications Ta b l e A-3 lists the specification s for each po wer supply (Cisco part number R2X0- PSU2-650W). Y ou can get more specific po wer information for yo ...

  • Cisco Systems UCS C210 - page 87

    B-1 Cisco UCS C210 Server Insta llation and Service Guide OL-20887-02 APPENDIX B Cable and Power Cord Specifications This appendix pro vides cabling and port speci ficati ons for control de vices and power connecti ons and includes th e following sections: • KVM Cable, pa ge B-1 • Supported Po wer Cords and Plugs, page B-2 KVM Cable The KVM cab ...

  • Cisco Systems UCS C210 - page 88

    B-2 Cisco UCS C210 Server Installation and Service Guide OL-20887-02 Appendix Supported Power Cords and Plugs Each po wer supply has a sep arate po wer cord. Standa rd po wer cords or jumper po wer cords are a vailable for connection to the server . The jumper po wer cord s, for use in racks, are av ailable as an optional alternativ e to the standa ...

  • Cisco Systems UCS C210 - page 89

    B-3 Cisco UCS C210 Server Insta llation and Service Guide OL-20887-02 Appendix AC Power Cord Illustrations This section contains the A C po wer cord illustrations. Figur e B-2 SFS-250V -1 0A -A R Figur e B-3 CAB-9K1 0A -A U CAB-N5K6A- N A Pow er Cord, 250 V A C 13 A NEMA 6-15 Plug, North America 8.2 2.5 Figure B-12 CAB-9K12A- N A Power cord, 125 V ...

  • Cisco Systems UCS C210 - page 90

    B-4 Cisco UCS C210 Server Installation and Service Guide OL-20887-02 Appendix Figur e B-4 SFS-250V -1 0A -CN Figur e B-5 CAB-9K1 0A -EU Figur e B-6 SFS-250V -1 0A -ID Cordset rating 10A, 250V (2500 mm) Plug: EL 218 (CCEE GB2009) 186573 Connector : EL 701 (IEC60320/C13) Connector : VSCC15 Cordset rating: 10A/16 A, 250 V Length: 8 ft 2 in. (2.5 m) Pl ...

  • Cisco Systems UCS C210 - page 91

    B-5 Cisco UCS C210 Server Insta llation and Service Guide OL-20887-02 Appendix Figur e B-7 SFS-250V -1 0A -IS Figur e B-8 CAB-9K1 0A -IT Figur e B-9 CAB-9K1 0A -SW Cordset rating 10A, 250V/500V MAX (2500 mm) Plug: EL 212 (SI-32) 186574 Connector : EL 701B (IEC60320/C13) EL -212 16A 250V Plug: I/3G (CEI 23-16) Connector C15M (EN60320/C15 ) Cordset r ...

  • Cisco Systems UCS C210 - page 92

    B-6 Cisco UCS C210 Server Installation and Service Guide OL-20887-02 Appendix Figur e B-1 0 CAB-9K1 0A -UK Figur e B-1 1 CAB-AC-250V/13A Figur e B-12 CAB-N5K6A -NA Plug: Cordset rating: 10 A, 250 V/500 V MAX Length: 2500mm 186580 Connector : EL 701C (EN 60320/C15) EL 210 (BS 1363A) 13 AMP fuse Cordset rating 13A, 250V (6.6 f eet) (79±2m) Plug: EL3 ...

  • Cisco Systems UCS C210 - page 93

    B-7 Cisco UCS C210 Server Insta llation and Service Guide OL-20887-02 Appendix Figur e B-13 CAB-9K12A -NA Figur e B-14 CAB-C13-C14-JMPR, Jumper P ow er Cord Connector: IEC60320/C15 Cordset rating 13A, 125V (8.2 feet) (2.5m) Plug: NEMA 5-15P 192260 Cordset rating 10A, 250V (686mm) Plug: SS10A 186569 Connector : HS10S ...

  • Cisco Systems UCS C210 - page 94

    B-8 Cisco UCS C210 Server Installation and Service Guide OL-20887-02 Appendix ...

  • Cisco Systems UCS C210 - page 95

    C-1 Cisco UCS C210 Server Insta llation and Service Guide OL-20887-02 APPENDIX C RAID Controller Considerations This appendix contain s the follo wing sections: • Supported RAID Cont rollers and Required Cabl es, page C-1 • Enabling the Inte grated Intel ICH10R RAID Controller in the BIOS, page C-2 • Enabling the Mezzanine Card RAID Controlle ...

  • Cisco Systems UCS C210 - page 96

    C-2 Cisco UCS C210 Server Installation and Service Guide OL-20887-02 Appendix Enabling the Integrated Intel ICH10R RAID Controller in the BIOS Note The integrated ICH10R RAID controller is not compati ble for use with VMW are ESX/ESXi Server softw are in any generation or v ersion of the Cisco UCS C200 server . When using the inte grated RAID, you ...

  • Cisco Systems UCS C210 - page 97

    C-3 Cisco UCS C210 Server Insta llation and Service Guide OL-20887-02 Appendix Enabling the Mezzanine Card RAID Controller in the BIOS When using the supported mezzan ine-style RAID contro ller cards, you must enable the ICH10R controller in En hanced mode. Step 1 Make sur e that a RAID ca ble is attach ed betw een the mezzanine card and the disk b ...

  • Cisco Systems UCS C210 - page 98

    C-4 Cisco UCS C210 Server Installation and Service Guide OL-20887-02 Appendix In some cases, the default extender backplane requ ires dif f erent cables than the optio nal expander backplane. The cable connections require d fo r each type of controller are as follows: • Integrated ICH10R: – Extender: Connect one SA T A cable from the mother bo ...

  • Cisco Systems UCS C210 - page 99

    C-5 Cisco UCS C210 Server Insta llation and Service Guide OL-20887-02 Appendix How to Disable Quiet Boot for CIMC Firmware Earlier Than Release 1.2(1) For CI MC firmw are and BIOS release 1.2(1) and later , Quiet Boot has been remov ed. If you are running CIMC firmw are and BIOS earlier than release 1.2(1) , you can use the follo wing procedure to ...

  • Cisco Systems UCS C210 - page 100

    C-6 Cisco UCS C210 Server Installation and Service Guide OL-20887-02 Appendix • The prompt for th e mezzanine-style cont roller cards is Ctrl-C . • The prompt for the onbo ard Intel ICH10R controll er utility is Ctrl-M . Note Cisco has also de veloped the Cisco Server Conf igurat ion Utility for C-Series se rv ers, which can assist you in setti ...

  • Cisco Systems UCS C210 - page 101

    C-7 Cisco UCS C210 Server Insta llation and Service Guide OL-20887-02 Appendix For More Information The LSI utilities ha ve help documentation for more information abou t using the utilities. For basic i nformation about RAID and for using the utilities for th e RAID controller cards, see the Cisco UCS Servers RAID Guide . Full LSI documentation is ...

  • Cisco Systems UCS C210 - page 102

    C-8 Cisco UCS C210 Server Installation and Service Guide OL-20887-02 Appendix ...

  • Cisco Systems UCS C210 - page 103

    D-1 Cisco UCS C210 Server Insta llation and Service Guide OL-20887-02 APPENDIX D Installation for Cisco UCS Integration The Cisco UCS integratio n instructions ha ve been mov ed to the integ ration guides found here: Cisco UCS C-Series Server I nte gration wit h UCS Manager Guides Refer to the guide that is for the versio n of Cisco UCS Manager tha ...

  • Cisco Systems UCS C210 - page 104

    D-2 Cisco UCS C210 Server Installation and Service Guide OL-20887-02 Appendix ...

Manufacturer Cisco Systems Category Security Camera

Documents that we receive from a manufacturer of a Cisco Systems UCS C210 can be divided into several groups. They are, among others:
- Cisco Systems technical drawings
- UCS C210 manuals
- Cisco Systems product data sheets
- information booklets
- or energy labels Cisco Systems UCS C210
All of them are important, but the most important information from the point of view of use of the device are in the user manual Cisco Systems UCS C210.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Cisco Systems UCS C210, service manual, brief instructions and user manuals Cisco Systems UCS C210. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Cisco Systems UCS C210.

Similar manuals

A complete manual for the device Cisco Systems UCS C210, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Cisco Systems UCS C210 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Cisco Systems UCS C210.

A complete Cisco Systems manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Cisco Systems UCS C210 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Cisco Systems UCS C210, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Cisco Systems UCS C210, that we can find in the current document
3. Tips how to use the basic functions of the device Cisco Systems UCS C210 - which should help us in our first steps of using Cisco Systems UCS C210
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Cisco Systems UCS C210
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Cisco Systems UCS C210 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Cisco Systems UCS C210?

Use the form below

If you did not solve your problem by using a manual Cisco Systems UCS C210, ask a question using the form below. If a user had a similar problem with Cisco Systems UCS C210 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)