Manual HP (Hewlett-Packard) 2nd edition

11 pages 1.5 mb
Download

Go to site of 11

Summary
  • HP (Hewlett-Packard) 2nd edition - page 1

    Converting Modular Smart Arr ay 500 to a Modular Smart Array 1000 SAN for additional scalability HOWTO, 2 nd edition Abstract ....................................................................................................................... ....................... 2 Introduction ................................................................. ...

  • HP (Hewlett-Packard) 2nd edition - page 2

    Abstract The HP StorageWorks Modular Smart Array 500 (M SA500) offers 2-node cluster ing, Recovery Server, and up to 4-node shared storage support at SCSI economics, while providing high data availability with redundant controllers and multi- path I/O technology. As your storage requirements evolve and you need to expand your storage system to grea ...

  • HP (Hewlett-Packard) 2nd edition - page 3

    Figure 2. Hot-pluggable Modular Smart Array 500 controller To add redundant controllers, redundant switc hes, and redundant Host Bus Adapters (HBA), or to setup other advanced configurati ons, refer to the HP StorageWorks Modular Smart Array 1000 User Guide, which is available online at http://h18000.www1.hp.com/products/stora geworks/msa1000/ docu ...

  • HP (Hewlett-Packard) 2nd edition - page 4

    Table 1. Minimum hardware requirements 5 Hardware  FCA2101 HBA, FCA2210, FCA221 4  Fibre Channel Cables  Modular Smart Array 1000 Controller 1  Modular Smart Array Fibre Channel I/O Module 2 or MSA SAN Switch 2/8 Table 2. Minimum software requirements 5 Software  MSA1000 Firmware (available for download from http://h18023.www1.hp.co ...

  • HP (Hewlett-Packard) 2nd edition - page 5

    Task 1: Removing the Modular Smart Array 500 Controller (See Figure 3) 1. Press the controller’s thumb latch, and pull the latch handle toward you X . 2. Remove the Modular Smart Array 500 Controller by pulling it straight out of the chassis Y . Figure 3. Removing the Modular Smart Array 500 Controller 1 2 1 2 Task 2: Inserting the Modular Smart ...

  • HP (Hewlett-Packard) 2nd edition - page 6

    3. Disconnect the SCSI cable(s) from the Mo dular Smart Array 500 system and server(s). 4. Remove the blanking panel from the back of the Modul ar Smart Array 500 by loosening the thumbscrew that holds the panel in place X and remove the panel from the back of the unit Y (see Figure 5). Figure 5. Removing the blanking panel 2 1 5. Insert the Modula ...

  • HP (Hewlett-Packard) 2nd edition - page 7

    Note The MSA Fabric Switch 8 is an opti onal six port, 2-GB/s Fibre Channel Fabric Switch. The MSA F abric Switch 8 replaces th e standard single port Fibre Channel connection provided by the Modular Smart Array Fibre Channel I/O Module. For more informatio n, refer to the MSA Fabric Switch 8 User Guide, which is available online at http://h18000.w ...

  • HP (Hewlett-Packard) 2nd edition - page 8

    Figure 7. MSA1000 dialog box 14. Click the Install button on the Setup screen (see Figure 8). Figure 8. MSA1000 install dialog box 15. Right-mouse click on My Computer , and select Manage . 16. Select Disk Management under Storage. You should be able to see the volumes on the Modular Smart Array 1000. 17. Use the LCD to check the firmware version f ...

  • HP (Hewlett-Packard) 2nd edition - page 9

    Troubleshooting tips This section provides tip s for troubleshooting som e common problems found in HP labs regarding the migration of Modular Smart Array 500 to Modular Smart Array 1000. Methodology This section lists basi c methodology to use when tr oubleshooting. First, gather the information to resolve the issue. Ask the followin g questions: ...

  • HP (Hewlett-Packard) 2nd edition - page 10

    For more information The table below provides links to the resource s referenced in this document and additional information that might be helpfu l in planning a SAN migration. Resource Description Web Address Product information The HP Modular Smart Array 500 site includes product information in the form of demos and documentation. http://h18000.w ...

  • HP (Hewlett-Packard) 2nd edition - page 11

    Call to action Please direct comments reg arding this communica tion to the ISS Technology Comm unications Gr oup at this Internet address: TechCom@HP.com © 2003 Hewlett-Packard Dev elopment Company, L. P. The information contained here in is subject to change without notice. The on ly warranties for HP products an d services are set fort h in the ...

Manufacturer HP (Hewlett-Packard) Category Network Hardware

Documents that we receive from a manufacturer of a HP (Hewlett-Packard) 2nd edition can be divided into several groups. They are, among others:
- HP (Hewlett-Packard) technical drawings
- 2nd edition manuals
- HP (Hewlett-Packard) product data sheets
- information booklets
- or energy labels HP (Hewlett-Packard) 2nd edition
All of them are important, but the most important information from the point of view of use of the device are in the user manual HP (Hewlett-Packard) 2nd edition.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals HP (Hewlett-Packard) 2nd edition, service manual, brief instructions and user manuals HP (Hewlett-Packard) 2nd edition. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product HP (Hewlett-Packard) 2nd edition.

A complete manual for the device HP (Hewlett-Packard) 2nd edition, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use HP (Hewlett-Packard) 2nd edition by users. Manuals are usually written by a technical writer, but in a language understandable to all users of HP (Hewlett-Packard) 2nd edition.

A complete HP (Hewlett-Packard) manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual HP (Hewlett-Packard) 2nd edition - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the HP (Hewlett-Packard) 2nd edition, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the HP (Hewlett-Packard) 2nd edition, that we can find in the current document
3. Tips how to use the basic functions of the device HP (Hewlett-Packard) 2nd edition - which should help us in our first steps of using HP (Hewlett-Packard) 2nd edition
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with HP (Hewlett-Packard) 2nd edition
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of HP (Hewlett-Packard) 2nd edition in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning HP (Hewlett-Packard) 2nd edition?

Use the form below

If you did not solve your problem by using a manual HP (Hewlett-Packard) 2nd edition, ask a question using the form below. If a user had a similar problem with HP (Hewlett-Packard) 2nd edition it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)