English dropdown-ico

Manual Cisco Systems 6500/7600

134 pages 1.76 mb
Download

Go to site of 134

Summary
  • Cisco Systems 6500/7600 - page 1

    CH A P T E R 6-1 Cisco 6500/7600 Series Manager User Guide 6 Logical Object Dialog Boxes This chapter describes the C6 5/76M dialog box es for the logical objects. The fol lo wing logical obj ect dialog boxes are a v ailable in the C65/76M: • C6576M NE Conf ig/Mgmt Dialog Box, page 6-3 • C6576M Software Dialo g Box, page 6-13 • C6576M Syslog ...

  • Cisco Systems 6500/7600 - page 2

    6-2 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes T able 6-1 Launch P oints for the C65/7 6M Dialog Bo xes Container Object Dialog Box Network Network Element All dialogs (und er the Cisco 65 00/7600 Series Manager menu entry) Phy sical Container (site, bay , shelf, etc.) All dialogs (und er the Cisco 65 00/7600 S ...

  • Cisco Systems 6500/7600 - page 3

    6-3 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M NE Config/Mgmt Dialog Box C6576M NE Config/Mgmt Dialog Box The C6576M NE Conf ig/Mgmt dialog box pr ovides mo nitoring and management information for properties related to the Catalyst 600 0 family swi tch or Cisco 7600 series Int ernet Router . These proper ...

  • Cisco Systems 6500/7600 - page 4

    6-4 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M NE Config/Mgmt Dialog Box Operating System Area The Operating System area of the C6576M Networ k Element dialog box provides the follo wing inform ation : • Expected OS T ype—This attrib ute is used by a client that initiates a deplo y ment conte xt to i ...

  • Cisco Systems 6500/7600 - page 5

    6-5 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M NE Config/Mgmt Dialog Box Figure 6-2 Confirmation Reset Window for a Networ k El ement Actions Area The Actions area of the C657 6M Network Element dialo g box provi des the follo wing information: • Commission button — Commissions t he object manually . ...

  • Cisco Systems 6500/7600 - page 6

    6-6 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M NE Config/Mgmt Dialog Box • discov erylostcomms—CEMF lost communication with the de vice during disco very , which occurs if the SNMP read community is in correct. • mismatched —The network el ement for the gi ven IP address does no t corrspond to a ...

  • Cisco Systems 6500/7600 - page 7

    6-7 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M NE Config/Mgmt Dialog Box SNMP Tab Figure 6-4 sho ws the SNMP tab of the C6576M Netw ork Element di alog box. Figure 6-4 SNMP Access T ab of the C6576M Netw ork Element Dialog Bo x IOS SNMP Area The IOS SNMP area of the C6576M Netw ork Element dial og box pr ...

  • Cisco Systems 6500/7600 - page 8

    6-8 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M NE Config/Mgmt Dialog Box Cat OS SNMP Area The Cat OS SNMP area of the C6576M Network Element dialog box provides the following inform ation : • Same As IOS?—If enabled, the IOS SNMP versi on and communities will be used to access the SNMP Agent on the S ...

  • Cisco Systems 6500/7600 - page 9

    6-9 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M NE Config/Mgmt Dialog Box Trap Generation Area The T rap Generation area of the C6576M Netw ork Element dial og box pro vides the follo wing inform ation : • SNMP T rap Status—Indicates the le vel at which SNMP traps are enabled. The lev el is one of the ...

  • Cisco Systems 6500/7600 - page 10

    6-10 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M NE Config/Mgmt Dialog Box Note An error is reported if a none xistent client is remo ved or if an existing client is added. Figure 6-6 Configure T r ap Client List Popup Window ...

  • Cisco Systems 6500/7600 - page 11

    6-11 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M NE Config/Mgmt Dialog Box ...

  • Cisco Systems 6500/7600 - page 12

    6-12 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M NE Config/Mgmt Dialog Box Additional Notes Tab Figure 6-7 sho ws the Additional Notes tab of the C657 6M Network Element dialog b ox. Figur e 6-7 Additional Not es T ab of the C6576M Networ k Element Dialog Box Notes Area The Notes area is a text box that a ...

  • Cisco Systems 6500/7600 - page 13

    6-13 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M Software Dialog Box C6576M Software Dialog Box This dialog box pro vides information on the IOS image and conf iguration of the switch or ro uter . This dialog box is launched from a Network Element obj ect within the Network or Physical vie w and the Softw ...

  • Cisco Systems 6500/7600 - page 14

    6-14 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M Software Dialog B ox Backup/Restore IOS Image Area The Backup/Restore IOS Image area of the C 6576M Software dialog box pro vides the followi ng inform ation : • TFTP Host—The IP address or hostname of the TFTP server that the IOS image was restored fro ...

  • Cisco Systems 6500/7600 - page 15

    6-15 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M Software Dialog Box Figur e 6-9 Scheduled Backup/Rest ore IOS Imag e Dialog Bo x Note An alarm is gen erated if the Ba ckup Status an d Restore Status attributes are set to F ailed. (See Chapter 8, “ Alarm s and Alarm Mana gement. ” ) Status Field The S ...

  • Cisco Systems 6500/7600 - page 16

    6-16 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M Software Dialog B ox Cat OS Image Tab Figure 6-10 sh ow s the Cat OS Image tab of the C6576M Softw are dialog box. Figur e 6-1 0 Cat OS Image T ab of the C6576M Sof twar e Dialog Box Catalyst OS Image Area The Catalyst OS Image ar ea of the C6576M Software ...

  • Cisco Systems 6500/7600 - page 17

    6-17 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M Software Dialog Box • Backup Source—The Cat OS image f ile to be backed up . Specify the full path to the imag e (for example, “slot 0:c6sup12-jsv-mz.121-6.E.bin”). • Backup Destination—The destinati on filen ame on the TFTP Host to which the im ...

  • Cisco Systems 6500/7600 - page 18

    6-18 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M Software Dialog B ox Note An alarm is gen erated if the Backup Status and Restore Status attributes are set to Failed. (See Chapter 8, “ Alarm s and Alarm Mana gement. ” ) IOS Config File Tab Figure 6-12 sh ow s the IOS Conf ig File tab of the C6576M So ...

  • Cisco Systems 6500/7600 - page 19

    6-19 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M Software Dialog Box Figure 6-13 P op-u p Menu Option to Edit the Run ning Configuration Fil e Startup Configuration Area The Startup Conf iguration area of the C6576 M Software dialog box pro vides the follo wing information: • Current Location—The lo c ...

  • Cisco Systems 6500/7600 - page 20

    6-20 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M Software Dialog B ox Figure 6-14 Start up Configuration Window Action Report Running Configuration Area The Running Conf iguration area of the C6576M Software di alog box pro vides the follo wing inform ation : • Last Changed—The time since the running ...

  • Cisco Systems 6500/7600 - page 21

    6-21 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M Software Dialog Box Figur e 6-15 Running Configur ation Windo w Action Report Backup/Restore Configuration Area The Backup/Restore Conf iguration area of the C6576M Softw are dialog box provides the fol lo wing inform ation : • TFTP Host—The IP address ...

  • Cisco Systems 6500/7600 - page 22

    6-22 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M Software Dialog B ox – Failed—The restore operati on failed. – Not ex ecuted—The restore operation was not ex ec uted. • Restore File—T he name of t he configuration file that will be restored. • Restore button—Restores the f ile specified i ...

  • Cisco Systems 6500/7600 - page 23

    6-23 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M Software Dialog Box Cat OS Config File Tab Figure 6-17 sh ow s the Cat OS Conf ig File tab of the C657 6M Software dialog box. Figure 6-1 7 Cat OS Config File T ab of the C6576M Softw are Dialog Bo x The running conf iguration file can be edited b y selecti ...

  • Cisco Systems 6500/7600 - page 24

    6-24 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M Software Dialog B ox Figure 6-1 8 P op-u p Menu Option to Edit the Run ning Configuration Fil e Startup Configuration Area The Startup Conf iguration area of the C6576 M Software dialog box pro vides the follo wing information: • Current Location—The lo ...

  • Cisco Systems 6500/7600 - page 25

    6-25 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M Software Dialog Box Figure 6-1 9 Star tup Configuration Window A cti on Report • V ie w Running Configurat ion b utton—Displays the current running conf iguration in a te xt box (see Figure 6-20 ). • Sav e Running Conf iguration b utton—Sav es the c ...

  • Cisco Systems 6500/7600 - page 26

    6-26 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M Software Dialog B ox Backup/Restore Configuration Area The Backup/Restore Conf iguration area of the C657 6M Software dialo g box pro vides the follo wing inform ation : • TFTP Host—The IP address or hostname of the TFTP serv er that the startup or runn ...

  • Cisco Systems 6500/7600 - page 27

    6-27 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M Software Dialog Box Ti p The configuration Backup/Restore actio ns are used to upload the swit ch or router startup con fi guration to a server . The configuration can then be edited on the server and do w nloaded back to the sw itch or router . • Restore ...

  • Cisco Systems 6500/7600 - page 28

    6-28 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M Software Dialog B ox Additional Notes Tab Figure 6-23 sh ow s the Additional Notes tab of the C6576 M Software dialog b ox. Figure 6-23 Additional Notes T ab of the C6576M Softw ar e Dialog Bo x Notes Area The Notes area is a text box that allows you to typ ...

  • Cisco Systems 6500/7600 - page 29

    6-29 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M Syslog Dialog Box C6576M Syslog Dialog Box This dialog box displays attrib utes for the system log messages on the switch or router . This dialog box can be launched from a Softwa re object or Syslog object within the Physical vie w . Y o u can choose more ...

  • Cisco Systems 6500/7600 - page 30

    6-30 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M Syslog Dialog Box Syslog Message Details Area The Syslog Message Details area of the C6576M Syslog dialo g box prov ides the follo wing information: • Messages Not Recorded—The number of sysl og messa ges not recorded. A messa ge is not re corded if it ...

  • Cisco Systems 6500/7600 - page 31

    6-31 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M Syslog Dialog Box Catalyst OS Tab Figure 6-25 sh ow s the Catalyst OS tab of the C65 76M Syslog dialog box. The Catalyst OS tab pro vides the follo wing information: • Facility—The f acility that generated the syslog message. • Se verity—The se veri ...

  • Cisco Systems 6500/7600 - page 32

    6-32 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M Syslog Dialog Box Syslog Message Details Area The Syslog Message Details area of the C6576M Syslog dialo g box prov ides the follo wing information: • Messages Not Recorded—The number of sysl og messa ges not recorded. A messa ge is not re corded if it ...

  • Cisco Systems 6500/7600 - page 33

    6-33 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M Syslog Dialog Box Additional Notes Tab Figure 6-26 sh ow s the Additional Notes tab of th e C6576M Syslog dialo g box. Figure 6-26 Additional Notes T ab of the C6576M Syslog Dialog Bo x Notes Area The Notes area is a text box that allo ws you to type in add ...

  • Cisco Systems 6500/7600 - page 34

    6-34 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M VTP Dialog Box C6576M VTP Dialog Box The VTP dialog box allo ws you to configur e VTP domains on the switch or router . This dialog box can be launched fro m a Software object or VT P object within th e Physical view . Y o u can choose more than one Softwar ...

  • Cisco Systems 6500/7600 - page 35

    6-35 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M VTP Dialog Box • Max. VLAN Storage —Estimate of the maximum num ber of VLANs about which the local system can recove r complete VTP informa tion after a reboot. If the number o f def ined VLANs is greater than this v alue, then the system cannot act as ...

  • Cisco Systems 6500/7600 - page 36

    6-36 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M VTP Dialog Box Status Field The Status display-only fiel d located at the bottom of the windo w i ndicates the current state of the object. This f ield has the f ollo wing v alues: • decommissioned—CEMF is not acti vely monitoring t he object attrib ute ...

  • Cisco Systems 6500/7600 - page 37

    6-37 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M VLAN Dialog Box C6576M VLAN Dialog Box This dialog box pro vides attributes for VLAN conf igurations. This dialog box can be launched from the Software object or VLAN object in the Physical view . Y ou can choose only one Software objec t and one VLAN objec ...

  • Cisco Systems 6500/7600 - page 38

    6-38 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M VLAN Dialog Box • mtuT ooBigForT runk—Indicat es that while this VLAN’ s MTU is supported b y this device, i t is too large for one or more of the device’ s trunk ports. • VLAN OS T ype —The type of VLAN. This attrib ute has one of the follo win ...

  • Cisco Systems 6500/7600 - page 39

    6-39 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M VLAN Dialog Box Figur e 6-31 Add VLAN Subdialog Bo x • Delete VL AN b utton—Deletes the currentl y selected VLAN . If you cli ck this butt on, you are asked to conf irm deletion of the cur rent VLAN (see Figure 6-32 ). Figure 6-32 Delete VL AN Subdialog ...

  • Cisco Systems 6500/7600 - page 40

    6-40 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M VLAN Dialog Box Configuration Tab Figure 6-33 sh ow s the Conf iguration tab of the C6576M VLAN dialog b ox. Figure 6-33 Configuration T ab for the C657 6M VLAN Dialog Box Configuration Area • MA C Address —MA C address of the VLAN interface. Note Nativ ...

  • Cisco Systems 6500/7600 - page 41

    6-41 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M VLAN Dialog Box VLAN Membership Tab Figure 6-34 sh ow s the VLAN Membership tab of the C6576M VLAN dialog box. Figur e 6-34 VLAN Membership T ab for the C657 6M VLAN Dialog Bo x VLAN Membership Area The VLAN Membership area displa ys the members of this VLA ...

  • Cisco Systems 6500/7600 - page 42

    6-42 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M VLAN Dialog Box Figur e 6-35 Add/Remov e VLAN Members Subdialog Box ...

  • Cisco Systems 6500/7600 - page 43

    6-43 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M VLAN Dialog Box Global Tab Figure 6-36 sh ow s the Global tab of th e C6576M VLAN dialog box. Figur e 6-36 Global T ab of th e C6576M VLAN Dialog Box 802.1Q Trunk Remapped VLANs Area This area list s the mappings between 8 02.1Q and IS L VLANs. The informat ...

  • Cisco Systems 6500/7600 - page 44

    6-44 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M VLAN Dialog Box Figur e 6-37 Add/Remo ve VLAN Mapp ing Subdialog Bo x • 802.1Q VLAN Number —The 802.1Q VLAN number to be mapped. • ISL VLAN Number—Th e ISL VLAN to which th e 802.1Q VLAN numb er is to be map ped. • Add Mapping button—Adds mappin ...

  • Cisco Systems 6500/7600 - page 45

    6-45 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M VLAN Dialog Box STP Tab Figure 6-38 sh ow s the VLAN STP tab of the C6576 M VLAN dialog box. Figur e 6-38 VLAN STP T ab f or the C6576M VLAN Dialog Bo x STP Area The STP area of the C6576M VLAN dialog provides th e follo wing information: • Spanning T r e ...

  • Cisco Systems 6500/7600 - page 46

    6-46 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M VLAN Dialog Box • Current Root MA C—Bridge identif ier address. This is the MA C address of the VLAN on the root bridge in the STP instance. If there is no spanning tree instance for the VLAN, the v alue is nil. This attrib ute is read-onl y . • Root ...

  • Cisco Systems 6500/7600 - page 47

    6-47 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M VLAN Dialog Box QoS Tab Figure 6-39 sho ws the Qo S tab of the C657 6M VLAN di alog box. Figur e 6-39 QoS T ab of the VLAN Dialog Box QoS Area The QoS area allows you to enable or disable Micr oflo w policing of bridged traf f ic on the VLAN, and attach or ...

  • Cisco Systems 6500/7600 - page 48

    6-48 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M VLAN Dialog Box • Enable VLAN-Based QoS button —Enables VLAN-based QoS on each of the VLAN’ s member interfaces. • Disable VLAN-Based QoS button —Disables VLAN-based QoS on each of t he VLAN’ s member interfaces. EoMPLS Tab Figure 6-40 sho ws th ...

  • Cisco Systems 6500/7600 - page 49

    6-49 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M VLAN Dialog Box VLAN Database Tab Figure 6-41 sho ws the VL AN Databa se tab of the C6 576M VLAN dialog box. There is no VLAN Database in Hybrid OS. Figur e 6-41 VLAN Database T ab of the C6576M VLAN Dialog Bo x VLAN Database Backup/Restore Area The VLAN Da ...

  • Cisco Systems 6500/7600 - page 50

    6-50 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M VLAN Dialog Box – Not ex ecuted—A restore has not been executed. • Restore File— Name of the file on the TFTP ser ver to which the VLAN configuration will be res t o re d f ro m . • Backup button—Backs up the VLAN conf iguration to the f ile spe ...

  • Cisco Systems 6500/7600 - page 51

    6-51 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M VLAN Dialog Box Additional Notes Tab Figure 6-43 sh ow s the Additional Notes tab of the C6576 M VLAN dialog box. Figure 6-43 Additional Notes T ab of the C6576M VLAN Dialog Box Notes Area The Notes area is a text box that allo ws you to type in additional ...

  • Cisco Systems 6500/7600 - page 52

    6-52 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M EtherChannel Dialog Box C6576M EtherChannel Dialog Box This dialog box pro vides attributes for EtherCh annel conf igurations. This d ialog box can be launch ed from the Softw a re object or EtherChannel object s in the Physical vie w . Status Tab Figure 6- ...

  • Cisco Systems 6500/7600 - page 53

    6-53 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M EtherChannel Dialog Box Note When a managed system initializes, al l interfaces start with Administrative Status in the do wn state. As a result of either explicit management act ion or pe r conf iguration information retained b y the managed system, Admini ...

  • Cisco Systems 6500/7600 - page 54

    6-54 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M EtherChannel Dialog Box Configuration Tab Figure 6-45 sh ow s the Config uration tab of the C657 6M EtherChannel dialog box. Figure 6-45 Configuration T ab of the C6576M EtherChannel Dialog Bo x General Area The General area pro vides the follow ing informa ...

  • Cisco Systems 6500/7600 - page 55

    6-55 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M EtherChannel Dialog Box • Distribut ion Prot ocol—P rotocol used for load balancing on the EtherChannel. This f ield has the follo wing values: – ip—IP address. – mac—MA C addre ss. • Distribution Addr e ss —Address used for load balancing o ...

  • Cisco Systems 6500/7600 - page 56

    6-56 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M EtherChannel Dialog Box Membership Tab Figure 6-46 sh ow s the Membership tab of the C6576M Eth erChannel dialog box. Figure 6-46 Membership T a b of the C6576M EtherChannel Dial og Box Global EtherChannel Ports Assignment Area This area list s the EtherCha ...

  • Cisco Systems 6500/7600 - page 57

    6-57 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M EtherChannel Dialog Box • Admin Group —In nati ve IOS, this is the EtherChann el identif ier that the interface belongs to (or the new EtherChannel to be creat ed). In hybrid OS , this is the channel group to which the interface belongs. Note When a new ...

  • Cisco Systems 6500/7600 - page 58

    6-58 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M EtherChannel Dialog Box Routing Protocol Tab Figure 6-47 sh ow s the Routing Protocol tab o f the C6576M EtherChannel dial og box. Figure 6-47 Routing Prot ocol T ab of the C6576M EtherCha nnel Dialog Box EIGRP Area The EIGRP area of the C6576M EtherChannel ...

  • Cisco Systems 6500/7600 - page 59

    6-59 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M EtherChannel Dialog Box • Le vel 1 Hel lo Interv al—Length of time between hell o packets generated on the interf ace for lev el 1 routing. • Le vel 2 Hel lo Interv al—Length of time between hell o packets generated on the interf ace for lev el 2 ro ...

  • Cisco Systems 6500/7600 - page 60

    6-60 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M EtherChannel Dialog Box – root – none • PortFast Enabled— Indicates whether or not an in terf ace is enabled to move directly to the forwarding st ate on link up. This is a read-o nly attrib ute. Portfast can be conf igured on a trunking interface, ...

  • Cisco Systems 6500/7600 - page 61

    6-61 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M EtherChannel Dialog Box – CatOS 6.3:Int eger(0..63) – CatOS 7.1:Int eger(1..63) • Cost—Describes the STP VLAN path cost of this interface. The VL AN path cost is only used on trunking interf aces. On any switch port th at is not in tr unking mode, t ...

  • Cisco Systems 6500/7600 - page 62

    6-62 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M EtherChannel Dialog Box Figur e 6-49 Add / Remov e Per VLAN S TP Setting Subdialog Bo x ...

  • Cisco Systems 6500/7600 - page 63

    6-63 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M EtherChannel Dialog Box STP Status Area The STP Status area of the C6576M Eth ernet Interface di alog box pro vides the follo wing information: • STP VLAN Status T able—Describes the st atus of the acti ve STP VLAN port con fi gurations of the interface ...

  • Cisco Systems 6500/7600 - page 64

    6-64 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M EtherChannel Dialog Box HSRP Area The HSRP area of the C6576M Ethernet Interface dialog box provides th e follo wing information: • HSRP Group T able —Describes HSRP groups deployed on an interface. Note There may be multiple groups deplo yed on an inte ...

  • Cisco Systems 6500/7600 - page 65

    6-65 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M EtherChannel Dialog Box Figur e 6-51 HSRP Gr oup Configur e Subdialog Bo x Secondary IP Area The Secondary IP area of the C6576M Ethernet Interf ace dialog box provid es the follo wing information: • HSRP Secondary Address T able—Describes secondary IP ...

  • Cisco Systems 6500/7600 - page 66

    6-66 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M EtherChannel Dialog Box – Hold Interval Figur e 6-52 HSRP Secondary IP Modify Subd ialog Bo x ...

  • Cisco Systems 6500/7600 - page 67

    6-67 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M EtherChannel Dialog Box Additional Notes Tab Figure 6-53 sho ws th e Additional No tes tab of the C6576M Ethe rChannel di alog box. Figure 6-53 Additional Notes T ab of the C6576M EtherChannel Dialog Box Notes Area The Notes area is a text box that allo ws ...

  • Cisco Systems 6500/7600 - page 68

    6-68 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M BGP Dialog Box C6576M BGP Dialog Box The C6576M BGP dialog box provides inf ormation for the IOS Border Gate way Protocol (BGP). This dialog box can be launch ed from the Softwa re object or BGP object in the P hysical vie w . BGP Tab Figure 6-54 sh ow s th ...

  • Cisco Systems 6500/7600 - page 69

    6-69 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M BGP Dialog Box Figur e 6-55 BGP Enab le Dialog Bo x BGP Network Path Attribute Table Area The BGP Netwo rk Path Attribute T abl e area contains information abou t paths to destination network s receiv ed from all BGP pe ers. This ar ea contains the followin ...

  • Cisco Systems 6500/7600 - page 70

    6-70 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M BGP Dialog Box • Degree of Prefer ence—D egree of preference for an advertised route. A v alue of -1 indicates an absence of this attribute. • Add/Remove Net work Path Attrib ute Entry b utton —Adds or remo ves specific netw ork(s) to be advertised ...

  • Cisco Systems 6500/7600 - page 71

    6-71 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M BGP Dialog Box Neighbor Tab Figure 6-57 sh ow s the Neighbor tab of t he C6576M BGP dialo g box. Figure 6-57 Neighbor T ab of the C6576M BGP Dialog Bo x BGP Neighbor Table Area This area li sts the BGP nei ghbors of the l ocal BGP process : • Neighbor IP ...

  • Cisco Systems 6500/7600 - page 72

    6-72 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M BGP Dialog Box Figure 6-58 A d d or Remov e BGP P eer s Dialog Bo x ...

  • Cisco Systems 6500/7600 - page 73

    6-73 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M BGP Dialog Box Redistribution Tab Figure 6-59 sh ow s the Redistrib ution tab of the C6576M BGP dialog box. Figur e 6-59 Redistr ibution T ab of the C657 6M BGP Dialog Bo x Redistribution Table Area This area describes the route redistrib ution configur ati ...

  • Cisco Systems 6500/7600 - page 74

    6-74 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M BGP Dialog Box Default Metric Area This area ha s one attrib ute: • Default Met ric—Default metr ic used for route redist rib ution. This metric is used when and e xplicit metric is not gi ven during route redist ribut ion process. Edit Redistribution T ...

  • Cisco Systems 6500/7600 - page 75

    6-75 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M BGP Dialog Box Distribution List Tab Figure 6-60 sh ow s the Distrib ution List tab of th e C6576M BGP dialog box. Figure 6-60 Distr ibution List T ab of the C6576M BGP Dialog Bo x Distribution List Table Area This area describes f iltering of routing updat ...

  • Cisco Systems 6500/7600 - page 76

    6-76 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M BGP Dialog Box – GE-W AN <slot>/< port> – POS <slot>/<port> – A TM <slot>/<subslot>/<port> – Port-channel <n> (Nati ve IOS only) – VLAN <n> • Protocol—Ide ntifies the routing prot ocol sour ...

  • Cisco Systems 6500/7600 - page 77

    6-77 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M BGP Dialog Box Additional Notes Tab Figure 6-61 sh ow s the Additional Notes tab of the C6576 M BGP dialog box. Figure 6-61 A dditi onal Notes T ab of the C657 6M BGP Dialog Bo x Notes Area The Notes area is a text box that allo ws you to type in additional ...

  • Cisco Systems 6500/7600 - page 78

    6-78 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M OSPF Dialog Box C6576M OSPF Dialog Box The C6576M OSPF dialog box provides information fo r all IOS Open Shortest P ath First (OSPF) routing protocol processes. This dialog b ox can be launched from the Softwa re object or OSPF objects in the Physical view ...

  • Cisco Systems 6500/7600 - page 79

    6-79 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M OSPF Dialog Box Note The Catalyst 6000 family switches and the Cisco 7600 ser ies Internet Routers support only three OSPF processes. Specify the OSPF Process ID (number only) and click Add to creat e the OSPF process on the switch or router . The string ? ...

  • Cisco Systems 6500/7600 - page 80

    6-80 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M OSPF Dialog Box Status Field The Status display-only fiel d located at the bottom of the windo w i ndicates the current state of the object. This f ield has the f ollo wing v alues: • decommissioned—CEMF is not acti vely monitoring t he object attrib ut ...

  • Cisco Systems 6500/7600 - page 81

    6-81 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M OSPF Dialog Box – nssa—Similar to a stub area b ut autonomous system external rout es can be imported into the area. • Au t h . T y p e — A ut h e n t ic a t i o n t y pe f o r t h e ar e a . The authentication ty pe must be the same for all routers ...

  • Cisco Systems 6500/7600 - page 82

    6-82 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M OSPF Dialog Box Network Masks Area The table in this area displays the networks associ at ed with the selected OSPF process. This table contains the follo wing information: • Area ID—Area ID assign ed to the ne tworks and subnets. • Network Number—I ...

  • Cisco Systems 6500/7600 - page 83

    6-83 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M OSPF Dialog Box Global Tab Figure 6-67 sho ws the Global tab of the C6576M OSPF dialog box. Figur e 6-67 Global T ab of th e C6576M OSPF Dialog Bo x Global Network Configuration Table This describes the OSPF view of all interf aces on the router . This tabl ...

  • Cisco Systems 6500/7600 - page 84

    6-84 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M OSPF Dialog Box – disabled—Indicates th at the interf ace is ext ernal to OSPF . • T rans. Priority—The priority of this interf ace. Used in multiaccess netwo rks, this fi eld is used in the designated router el ection algor ithm. The v alue 0 signi ...

  • Cisco Systems 6500/7600 - page 85

    6-85 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M OSPF Dialog Box Neighbor Tab Figure 6-68 sho ws the Neighbor tab for the C6576M OSPF dialog box. Figure 6-68 Neighbor T a b of th e C6576M OSPF Dialog Bo x Global Neighbor Routers Area This area lists all OSPF neighbors for all OSPF processe s. This area co ...

  • Cisco Systems 6500/7600 - page 86

    6-86 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M OSPF Dialog Box – exch ange – loading – full • Neighbor Entry Status—This v ariable displays the status o f the entry . Setting the variable t o “in valid” can make it inoperati ve. • Add/Remo ve Neighbor s—Adds or remo ves neighbor s. Lau ...

  • Cisco Systems 6500/7600 - page 87

    6-87 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M OSPF Dialog Box Redistribution Tab Figure 6-70 sho ws the Redistribution t ab of the C6576M OSPF dialog box. Figur e 6-70 Redistr ibution T ab of the C657 6M OSPF Dialog Bo x ...

  • Cisco Systems 6500/7600 - page 88

    6-88 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M OSPF Dialog Box Redistribution Table Area This area describes the route redistr ibuti on conf igur ation of the OSPF routing process. Rou tes learned from other interior and e xterior routing protocols may be redistrib uted into the OSPF routing domain. • ...

  • Cisco Systems 6500/7600 - page 89

    6-89 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M OSPF Dialog Box Distribution List Tab Figure 6-71 sho ws the Distribution List tab of the C6576M OSPF dialog box. Figure 6-71 Distr i bution List T ab of the C6 576M OSPF Dialog Box Distribution List Table Area This area describes f iltering of routing upda ...

  • Cisco Systems 6500/7600 - page 90

    6-90 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M OSPF Dialog Box – GigabitEtherne t <slot>/<port> (Nati ve IOS only) – GE-W AN <slot>/< port> – POS <slot>/<port> – A TM <slot>/<subslot>/<port> – Port-channel <n> (Nati ve IOS only) – V ...

  • Cisco Systems 6500/7600 - page 91

    6-91 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M OSPF Dialog Box Additional Notes Tab Figure 6-72 sho ws the Additional Notes tab of the C6576M OSPF dialog box. Figure 6-72 A dditi onal Notes T ab of the C657 6M OSPF Dialog Box Notes Area The Notes area is a text box that allo ws you to type in additional ...

  • Cisco Systems 6500/7600 - page 92

    6-92 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M EIGRP Dialog Box C6576M EIGRP Dialog Box The C6576M EIGRP dialog box provides informati on on the Enhanced Interior G ate way Routing Protocol (EIGRP) enab led in IOS. This dialog box is launched from the Softw are object or EIGRP objects in the Physical vi ...

  • Cisco Systems 6500/7600 - page 93

    6-93 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M EIGRP Dialog Box • Stuck In Acti ve—Length of time (in m inutes) that a rout e stays acti ve. Th is v al ue d et er min es th e maximum period of time that an EIG RP router will wait fo r replies to it s queries. If th is value is set too low , there mi ...

  • Cisco Systems 6500/7600 - page 94

    6-94 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M EIGRP Dialog Box Local Networks Area This area describes the netw orks supported b y EI GRP . EIGRP will send routin g updates on the interfaces in the n etworks. If th e network of an interface is not specif ied, it will not be adv e rtised by EIGRP . This ...

  • Cisco Systems 6500/7600 - page 95

    6-95 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M EIGRP Dialog Box Status Field The Status display-only fiel d located at the bottom of the wind ow indicates the curren t state of the object. This f ield has the foll o wing v alues: • decommissioned—CEMF is not acti vely monitoring t he object attrib u ...

  • Cisco Systems 6500/7600 - page 96

    6-96 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M EIGRP Dialog Box • Source ID—Identif ies the routing process from which routes are bein g distrib uted. This f ield may have the following v a lues: – IS-IS—This is either an implicit null tag or the t ag of a named IS-IS rout ing process. – EIGRP ...

  • Cisco Systems 6500/7600 - page 97

    6-97 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M EIGRP Dialog Box Edit Redistribution Table Area This area allo ws changes to be made to the attribut es sho wn in the Redistrib ution T able. These attr ibutes are discussed in detail in the “Redistrib ution T able Area” section on page 6-95 . • Proto ...

  • Cisco Systems 6500/7600 - page 98

    6-98 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M EIGRP Dialog Box Figure 6-77 Distr i bution List T ab of the C6 576M EIGRP Dialog Box Distribution List Table Area This area describes f iltering of routing updates sent or recei ved by the routing process. • A CL ID—Unique identifer of an A CL for f il ...

  • Cisco Systems 6500/7600 - page 99

    6-99 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M EIGRP Dialog Box – POS <slot>/<port> – A TM <slot>/<subslot>/<port> – Port-channel <n> (Nati ve IOS only) – VLAN <n> • Protocol—Source rout ing protocol from wh ich routes are being distrib uted into EIG ...

  • Cisco Systems 6500/7600 - page 100

    6-100 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M IS-IS Dialog Box Figure 6-78 Additional Notes T ab of the C6576M EIGRP Dialog Box Notes Area The Notes area is a text box that allows you to type in addition al notes for the object . C6576M IS-IS Dialog Box The C6576M IS-IS dialog box pro vides informatio ...

  • Cisco Systems 6500/7600 - page 101

    6-101 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M IS-IS Dialog Box Figur e 6-79 Details T ab of C65 76M IS-IS Dialog Bo x Global Area The Global area of the C6576M IS-IS dialog box pro vides the follo wing information: • CLNS Enabled—Indicates whether or not CLNS routing is enabled on the de vice. CLN ...

  • Cisco Systems 6500/7600 - page 102

    6-102 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M IS-IS Dialog Box • Add Ne w IS-IS button—Creates an IS-IS routing process on the managed de vice. • Remove IS-IS button—Deletes the currently selected IS-IS object. Network Area The Network ar ea of the C6576M IS-IS dialog box p rovides t he follo ...

  • Cisco Systems 6500/7600 - page 103

    6-103 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M IS-IS Dialog Box Figur e 6-80 Interf aces T ab of C6576M IS-IS Dialog Box Interface List Area The Interface List area of the C6576M IS-IS dialog box lists the interfaces supported by a gi ven IS-IS routing proc ess. This table w ill be empt y if CLNS routi ...

  • Cisco Systems 6500/7600 - page 104

    6-104 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M IS-IS Dialog Box Redistribution Tab Figure 6-81 sh ow s the Interfaces tab of th e C6576M IS-IS dialog box. Figur e 6-81 Redistri bution T ab of C6576M IS-IS Dialog Bo x Redistribution Table Area The Redistrib u tion T able area of the C6576M IS-IS dialog ...

  • Cisco Systems 6500/7600 - page 105

    6-105 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M IS-IS Dialog Box The Add and Remov e buttons enable and disabl e route redistrib ution from another IP routing process into the IS-IS area, respectiv ely . Note Explicit route redistrib ution from another IS-IS proce ss is not allo wed, howe ver , routes m ...

  • Cisco Systems 6500/7600 - page 106

    6-106 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M NDE Configuration Dialog Box C6576M NDE Configuration Dialog Box The C6576M NDE Conf iguration dialog box pro vides information on the Netflo w Data Export (NDE) confi guration on a Catalyst 60 00 family swi tch or a Cisco 7600 series Internet Router . The ...

  • Cisco Systems 6500/7600 - page 107

    6-107 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M NDE Configuration Dialog Box PFC Area The PFC area of the C6576M NDE dialog box provides the fo llo wing information: • PFC NDE Status—Indicates wh ether or not NDE is enabled for the export of statistics on Layer 3-switche d traff ic co llected in the ...

  • Cisco Systems 6500/7600 - page 108

    6-108 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M NDE Configuration Dialog Box • PFC Modify b u tton—Modif ies the source address used in the NDE packets containin g statistics from the PFC. • MSFC Modify bu tton—Modif ies the source interface for NDE packets containing statistics on routed flo ws ...

  • Cisco Systems 6500/7600 - page 109

    6-109 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M NDE Configuration Dialog Box Include Area This area allo ws you to specify in clude parameters for the NDE flo w filters. This area consist s of the follo wing parameters: • Source IP—Include flo w filter source host IP address. • Source Mask—Inclu ...

  • Cisco Systems 6500/7600 - page 110

    6-110 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M NDE Configuration Dialog Box The follo wing buttons implement the conf iguation changes: • Modify Filter—App lies the NDE conf iguration chan ges. • Remov e Filter—Remov es a configur ed NDE Include or Ex clude Flo w Mask filter . Additional Notes ...

  • Cisco Systems 6500/7600 - page 111

    6-111 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M STP Dialog Box C6576M STP Dialog Box The C6576M STP dialog box pr ovides info rmation on the global Span ning T ree Protocol configurati on on a managed Catalyst 6000 family sw itch or Cisco 7600 seri es Internet Router . This dialog box is launched from t ...

  • Cisco Systems 6500/7600 - page 112

    6-112 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M STP Dialog Box • Station-Learning Generating Ra te—The maximum number of station-learning frames that the dev ice will generate in each 100-milisecond p eriod after an UplinkF ast transition. Applies to all STP instances running on the device. • Ethe ...

  • Cisco Systems 6500/7600 - page 113

    6-113 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M ACL Configuration Dialog Box C6576M ACL Configuration Dialog Box The C6576M A CL dialog box describes a numbered or named access control list (A CL) on a Catalyst 6000/6500 s eries switch or Cisc o 7600 series Intern et Router . The C6 5/76M Contro ller su ...

  • Cisco Systems 6500/7600 - page 114

    6-114 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M ACL Configuration Dialog Box • Remark—Mandatory comment that de scribes the access list entry , up to 100 characters long. Figur e 6-89 ACL A dd Dialog Bo x Filter Table Area The Filter T able area o f the C6576M A CL dial og box de scribes permit/den ...

  • Cisco Systems 6500/7600 - page 115

    6-115 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M ACL Configuration Dialog Box • Add Filter b utton—Launches the Add Filter subdialog box, sho wn in Figure 6-90 , to ap pend a permit or deny filter to an A CL. On a standard ACL, a f ilt er may only be de fined against traff i c flows originating from ...

  • Cisco Systems 6500/7600 - page 116

    6-116 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M ACL Configuration Dialog Box • Source Port—The decimal number or name of a source TCP or UDP port. TCP port names can only be used when f iltering TCP . UDP port names can only b e used when f iltering UDP . • Destination IP—Number of t he network ...

  • Cisco Systems 6500/7600 - page 117

    6-117 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M Loopback Dialog Box Notes Area The Notes area is a text box that allo ws you to type in additional notes f or the object C6576M Loopback Dialog Box The C6576M Loopback dialog box describes the deplo y ment of all loopback interfaces on a Catalyst 6000/6500 ...

  • Cisco Systems 6500/7600 - page 118

    6-118 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M Loopback Dialog Box Layer 3 Subarea • IP Address—IP address of the inte rface. A v alue of 0.0.0.0 indicates that no IP address has been configured on the interf ace. • Netmask—IP su bnet mask of th e in terface. The v alue of the mask is an IP add ...

  • Cisco Systems 6500/7600 - page 119

    6-119 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M QoS Dialog Box Notes Area The Notes area is a text box that allo ws you to type in additional notes for the obj ect. C6576M QoS Dialog Box The C6576M QoS dialog box descri bes the global quality of service (QoS) engine p rocess on a Catalyst 6000/6500 seri ...

  • Cisco Systems 6500/7600 - page 120

    6-120 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M QoS Dialog Box • Microflow Enabled—Indicates whether o r not Microflow policing is ena bled on the device. This enables QoS policing against Layer 3 switched traff i c flows. This feature can only be enabled when QoS is enabled. By d efault, i t will b ...

  • Cisco Systems 6500/7600 - page 121

    6-121 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M QoS Dialog Box Named Aggregate Tab Figure 6-96 sh ow s the Named Aggreg ate tab of the C6576M QoS di alog box. Figur e 6-96 Named Aggr egate T ab of C6 576M QoS Dialog Bo x Named Aggregate Area The Named Aggreg ate area of the C6576M QoS di alog box descri ...

  • Cisco Systems 6500/7600 - page 122

    6-122 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M QoS Dialog Box • Conform Action—Action to b e taken when traf fic conforms to QoS parameters. This attr ibute h as one of the fo llowing v alues: – Drop—Drops packet – T ransmit—Tran smits packet – Set DSCP—Assigns DSCP v alue to packet bef ...

  • Cisco Systems 6500/7600 - page 123

    6-123 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M QoS Dialog Box Figur e 6-97 QoS Aggr egat e Add Subdialog Box of the C6576M QoS Dialog Bo x • Remove button—Deletes one or more aggregrate po licers on the ma naged de vice selected in the Named Policers T able. ...

  • Cisco Systems 6500/7600 - page 124

    6-124 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M QoS Dialog Box Class Maps Tab Figure 6-98 sh ow s the Class Maps tab of the C6576M QoS di alog box. Figur e 6-98 Class Maps T ab of C6 576M QoS Dialog Bo x Class Maps Area The Class Maps area of the C 6576M Q oS dialog bo x describes gl obally de fined cla ...

  • Cisco Systems 6500/7600 - page 125

    6-125 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M QoS Dialog Box • Match DSCP—Specif ies DSCP va lues to match. Up to eight v alues may be specifi ed. If no v alues are specified, DSCP matching criter ia is disab led. This attrib ute may only hav e a value if the T ype attrib ute is ethernet and both ...

  • Cisco Systems 6500/7600 - page 126

    6-126 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M QoS Dialog Box Additional Notes Tab Figure 6-100 sho ws the Additional Notes tab of the C657 6M QoS dialog box. Figur e 6-1 00 A dditional Notes T ab of the C6576M QoS Dialog Bo x Notes Area The Notes area is a text box that allows you to type in addition ...

  • Cisco Systems 6500/7600 - page 127

    6-127 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M QoS Policy Map Dialog Box C6576M QoS Policy Map Dialog Box The C6576M QoS Polic y Map dialog box describes a quali ty of service (QoS) poli cy map on a Catalyst 6000/6500 series or Cisco 7600 series Internet Ro uter . A polic y map consists of one or more ...

  • Cisco Systems 6500/7600 - page 128

    6-128 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M QoS Policy Map Dialog Box Figur e 6-1 02 P olicy Map A dd Subdialog Bo x of C6576M QoS P olicy Map Dialo g Bo x ...

  • Cisco Systems 6500/7600 - page 129

    6-129 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M QoS Policy Map Dialog Box Policy Map Classes Tab Figure 6-103 sho ws the Policy Map Cl asses tab of the C6576M QoS Pol icy Map d ialog box. Figure 6-1 03 P olicy Map Classes T ab of C6576M QoS P olicy Map Dialog Bo x Policy Class List Area The Policy Cl as ...

  • Cisco Systems 6500/7600 - page 130

    6-130 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M QoS Policy Map Dialog Box Figure 6-1 04 P olicy Map Add Class Subdialog Bo x of C6576M QoS P olicy Map Dialog Bo x The follo wing is shown in this sub dialog box. Class Name Area • Class Name T able—Lists the c lasses by the Class Map Name. • Class M ...

  • Cisco Systems 6500/7600 - page 131

    6-131 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M QoS Policy Map Dialog Box • Burst—No rmal burst size, in bytes, to enfor ce against polic ed traffic. This v a lue is mandato ry when def ining an expl icit policer . A v alue of 0 is return ed on read if an expli cit policer is not def ined for the po ...

  • Cisco Systems 6500/7600 - page 132

    6-132 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M QoS Policy Map Dialog Box • Max. Burst—Maximum b urst size, in bytes, in bytes to enfo rce against policed traf fic.A v alue of 0 is returned on r ead if an expl icit policer is not defi ned for the polic y map class. Note The Max. Burst attrib ute is ...

  • Cisco Systems 6500/7600 - page 133

    6-133 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M QoS Policy Map Dialog Box • Microflo w Enabled—Indicates wheth er or not a Microflo w policer is defined for the polic y map class. This enables QoS policing against Layer 3 switched traf f ic flo ws. This attribute may ha ve one of the follo wing valu ...

  • Cisco Systems 6500/7600 - page 134

    6-134 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M QoS Policy Map Dialog Box Additional Notes Tab Figure 6-105 sho ws the Additional Notes tab of the C6 576M QoS Polic y Map dialog box. Figur e 6-1 05 A dditional Notes T ab of the C6576M QoS P olicy Map Dial og Bo x Notes Area The Notes area is a text box ...

Manufacturer Cisco Systems Category Network Router

Documents that we receive from a manufacturer of a Cisco Systems 6500/7600 can be divided into several groups. They are, among others:
- Cisco Systems technical drawings
- 6500/7600 manuals
- Cisco Systems product data sheets
- information booklets
- or energy labels Cisco Systems 6500/7600
All of them are important, but the most important information from the point of view of use of the device are in the user manual Cisco Systems 6500/7600.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Cisco Systems 6500/7600, service manual, brief instructions and user manuals Cisco Systems 6500/7600. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Cisco Systems 6500/7600.

Similar manuals

A complete manual for the device Cisco Systems 6500/7600, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Cisco Systems 6500/7600 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Cisco Systems 6500/7600.

A complete Cisco Systems manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Cisco Systems 6500/7600 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Cisco Systems 6500/7600, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Cisco Systems 6500/7600, that we can find in the current document
3. Tips how to use the basic functions of the device Cisco Systems 6500/7600 - which should help us in our first steps of using Cisco Systems 6500/7600
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Cisco Systems 6500/7600
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Cisco Systems 6500/7600 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Cisco Systems 6500/7600?

Use the form below

If you did not solve your problem by using a manual Cisco Systems 6500/7600, ask a question using the form below. If a user had a similar problem with Cisco Systems 6500/7600 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)