Manual Beko DIN 6830 FX30

36 pages Not applicable
Download

Go to site of 36

Summary
  • Beko DIN 6830 FX30 - page 1

    DISHW ASHER ...

  • Beko DIN 6830 FX30 - page 2

    Please read this user manual first! Dear Customer , We hope that you get the best results from the product which has been manufactured in state-of-the-art plants and passed through a strict quality control procedure. Therefore, please read the entire user manual carefully before using the product and keep it as a reference for future use. In case o ...

  • Beko DIN 6830 FX30 - page 3

    CONTENTS Dishwasher 1. 3 Important 2. safety instructions 5 General safety 5 Intended use 5 Children’s safety 6 Installation 3. 7 Appropriate installation location 7 Connecting water supply 7 Connection to the drain 8 Adjusting the feet 9 Aquasafe + 9 Electrical connection 9 Initial use 9 Disposing of packaging material 10 T ransportation of the ...

  • Beko DIN 6830 FX30 - page 4

    3 EN 1 Dishwasher Overview 1. Upper basket with rack 2. Upper impeller 3. Lower impeller 4. Filters 5. Lower basket 6. Control panel 7. Door 8. Detergent dispenser 9. Silverware basket 10. Lower impeller slot 1 1. Salt reservoir lid 12. Upper basket rail 13. Ceiling silverware basket 14. T abletop (depends on the model) 15. Ceiling impeller 16. Fan ...

  • Beko DIN 6830 FX30 - page 5

    4 EN T echnical specifications This product complies with the following EU directives: Development, production and sales stages of this product comply with the safety rules included in all pertaining European Community regulations. 2006/95/EC, 2004/108/EC, 93/68/EC, IEC 60436, EN 50242 Power input 220-240 V , 50 Hz T otal power consumption 1900-220 ...

  • Beko DIN 6830 FX30 - page 6

    5 EN 2 Important safety instructions This section contains safety instructions that will help to get protected from risk of personal injury or property damage Failure to follow these instructions shall void all warranties. General safety Never place the product on a • carpet-covered floor; otherwise, lack of airflow beneath the product will ca ...

  • Beko DIN 6830 FX30 - page 7

    6 EN This product should not be • used by persons with physical, sensory or mental disorders or unlearned or inexperienced people (including children) unless they are attended by a person who will be responsible for their safety or who will instruct them accordingly for use of the product. Children’ s safety Electrical products are dangerous ...

  • Beko DIN 6830 FX30 - page 8

    7 EN 3 Installation Refer to the nearest Authorised Service Agent for installation of your product. T o make the product ready for use, make sure that the electricity , tap water supply and water drainage systems are appropriate before calling the Authorised Service Agent. If they are not, call a qualified technician and plumber to have any necessa ...

  • Beko DIN 6830 FX30 - page 9

    8 EN Connection to the drain W ater discharge hose can directly be connected to the drain hole or sink’s drainage. The length of this connection must be min. 50 cm and max. 100 cm from the floor . 101 1  Open the taps completely after making the connections to check for water leaks. A For your safety , close the water inlet tap completely afte ...

  • Beko DIN 6830 FX30 - page 10

    9 EN Adjusting the feet If the door of the product cannot be closed properly or if the product swings when you push it slightly , then you need to adjust the feet of the product. Adjust the feet of the product as illustrated in the installation manual supplied with the product. Aquasafe+ (depends on the model) Protect the Aquasafe+ system against w ...

  • Beko DIN 6830 FX30 - page 11

    10 EN detergent while the machine is empty . During the initial use, fill the salt reservoir with 1 litre of water prior to filling it with salt. C Some water might have remained in the product due to the quality control processes in the production. It is not harmful for the product. Disposing of packaging material Packaging materials are dangerous ...

  • Beko DIN 6830 FX30 - page 12

    11 EN 4 Prewashing Tips for energy saving Following information will help you use the product in an ecological and energy-efficient manner . • Wipe away any coarse food remnants on the dishes before putting them in the product. • Operate the product after filling it completely . • When selecting a programme, refer to the "Progra ...

  • Beko DIN 6830 FX30 - page 13

    12 EN 1012 Adding salt W ater softening system needs to be regenerated in order for the product operates with the same performance continuously . Dishwasher salt is used for this purpose. C Use in your product only the special softening salts produced particularly for use in dishwashers. C We recommend using granular or powder softening salts. Do n ...

  • Beko DIN 6830 FX30 - page 14

    13 EN 1014 1014 Put the detergent into the detergent dispenser just before operating the machine as illustrated below . 1. Push the latch to right to open the detergent dispenser lid (A). 5. If you will not start a washing programme immediately after adding the salt, run the machine empty in the shortest programme to dissolve and wash away the scat ...

  • Beko DIN 6830 FX30 - page 15

    14 EN 2222 rinse aid and water softening salt individually . C Information about suitable places (detergent dispenser , basket etc.) in the dishwasher to place the tablet can be found amongst the usage instructions on the packages of the tablet detergents. T ablet detergent types commonly found in the market: 2in1: Contains detergent, rinse aid or ...

  • Beko DIN 6830 FX30 - page 16

    15 EN 1013_redaksiyon 1013_redaksiyon Rinse aid C The rinse aid used in dishwashers is a special combination used to increase drying efficiency and prevent water or limescale stains on the washed items. For this reason, care must be paid to have rinse aid in the rinse aid reservoir and to use rinse aids produced specially for dishwashers only . Che ...

  • Beko DIN 6830 FX30 - page 17

    16 EN time. We strongly recommend you to check if the tableware you are going to purchase is suitable for washing especially in the dishwasher . Placing the dishes into the dishwasher Y ou can use your dishwasher in the optimum way with respect to energy consumption and washing and drying performance only if you place the dishes in an orderly way . ...

  • Beko DIN 6830 FX30 - page 18

    17 EN Suggestions for loading the dishwasher Lower basket Upper basket Improper Loading Of Dishware Improper Loading Of Dishware ...

  • Beko DIN 6830 FX30 - page 19

    18 EN 2555 4-3B T all T ub cutlery basket 1029_redaksiyon   Silverware basket (depends on the model) Silverware basket is designed to wash your dishes such as fork, spoon and etc. in a cleaner manner . Silverware basket piece (depends on the model) Y ou can place your forks, spoons and etc. to upper basket with the additional piece in the fig ...

  • Beko DIN 6830 FX30 - page 20

    19 EN 1017           1020 spaces by folding each wire individually or all of them at once. Lay the foldable wires down by pressing on the latch (A). 1054    � Collapsable lower basket wires (2 pieces) (depends on the model) The two piece foldable wires located at the lower basket of the machine are designed ...

  • Beko DIN 6830 FX30 - page 21

    20 EN 1023 1019                            Lower basket multipurpose / height adjustable service rack (depends on the model) This accessory located at the lower basket of the machine allows you to easily wash pieces such as extra glasses, long ladles and bread knives. ...

  • Beko DIN 6830 FX30 - page 22

    21 EN 1025 1026     Upper basket drawer (depends on the model) Y ou can easily place additional desert spoons, small forks and knives into the basket drawer installed to the upper basket of your machine. Upper basket glass support piece (depends on the model) When placing long stemmed glasses or wine glasses, do not lean them against ot ...

  • Beko DIN 6830 FX30 - page 23

    22 EN 1021 eps of the loaded basket in up or down directions without removing it from the machine. T o raise the basket: 1. Grab one of the upper basket wires (right or left) and lift it up (A). (1). Place your larger dishes into the area created (2). T o bring the wires back to vertical position, just lift them up.       Collapsa ...

  • Beko DIN 6830 FX30 - page 24

    23 EN 1065 eps     2. Repeat the same process to raise the other side of the basket. 3. Make sure that both sides of the basket height adjustment mechanism are at the same level (down or up). T o lower the basket: 1. Press the latch on the basket adjustment mechanism (right or left) to lower the basket (B). 2. Repeat the same process to ...

  • Beko DIN 6830 FX30 - page 25

    24 EN 1022 eps Adjusting the height of empty upper basket (depends on the model) Y ou can adjust the height of the upper basket according to the size of the dish to be washed. Use basket rollers to change the basket height. 1. T urn the stoppers on the ends of the upper basket rails by turning them aside (A). 2. T ake the basket out (B). 3. Change ...

  • Beko DIN 6830 FX30 - page 26

    25 EN �  Since it can be removed from the machine easily , it allows taking out the dishes from the machine together with the basket after they are washed. It is compatible with all standard drawer sizes and can be placed into kitchen drawers and racks. Thus, there is no need to take the dishes out of the basket and lay them anymore. Removi ...

  • Beko DIN 6830 FX30 - page 27

    26 EN 1. T urn the micro filter (3) and coarse filter (2) assembly counter clockwise and pull it out from its seating (A). 5 Maintenance and cleaning Service life of the product extends and frequently faced problems decrease if it is cleaned at regular intervals. A Unplug the product and turn of f the tap before attempting any cleaning procedures. ...

  • Beko DIN 6830 FX30 - page 28

    27 EN       4. Clean all three filters under tap water by means of a brush. 5. Replace the metal/plastic filter . 6. Place the coarse filter into the microfilter . Make sure that it is properly seated. T urn the coarse filter clockwise until a “click” sound is heard. A Do not use the dishwasher without filter . C Incorrect pla ...

  • Beko DIN 6830 FX30 - page 29

    28 EN 1032 Upper impeller Check if the holes on the upper impeller (2) are clogged. If they are clogged, remove and clean the impeller . T urn its nut to left to remove the upper impeller (C, D). Make sure that the nut is tightened well when installing the upper impeller .       T avan_pervane_ redaksiyon Ceiling impeller Check if ...

  • Beko DIN 6830 FX30 - page 30

    29 EN T roubleshooting Machine does not start. • Power cable is unplugged. >>> Check if the power cable is plugged in. • Fuse is blown. >>> Check the fuses in your house. • W ater is cut. >>> Make sure that the water inlet tap is open. • Door of the machine is open. >>> Make sure that you have closed the ...

  • Beko DIN 6830 FX30 - page 31

    30 EN Dishes are not dry at the end of cycle • Dishes are not placed orderly in the machine. >>> Place your dishes in a way that no water will accumulate in them. • Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if necessary . Increase the rinse aid setting if there is enough amount of rinse a ...

  • Beko DIN 6830 FX30 - page 32

    31 EN Lime traces remain on dishes and glassware gains a misty appearance • Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if necessary . Increase the rinse aid setting if there is enough amount of rinse aid in the machine. • W ater hardness setting is low or salt level is insufficient >>> Mea ...

  • Beko DIN 6830 FX30 - page 33

    32 EN Rust, discoloration or surface deterioration occurs on dishes • Salt leakage exists. >>> Salt may cause deterioration and oxidation on metal surfaces. Pay attention not to spill salt around the salt filling hole while adding salt. Make sure that the salt reservoir lid is tightly closed after finishing the filling process. Run the p ...

  • Beko DIN 6830 FX30 - page 34

    33 EN Detergent remains in detergent dispenser . • Detergent dispenser was damp when adding detergent. >>> Make sure that the detergent dispenser is dried well prior to filling it with detergent. • Detergent is added long before the washing process. >>> Pay attention to add detergent shortly before start-up of the washing. • ...

  • Beko DIN 6830 FX30 - page 35

    34 EN A smear remains on glasses that resembles milk stain which can not be removed when wiped by hand. A bluish / rainbow appearance occurs when the glass is pointed to light. • Excessive rinse aid is used. >>> Lower rinse aid setting. Clean the spilled rinse aid when adding rinse aid. • Corrosion has occurred on glass due to soft wat ...

  • Beko DIN 6830 FX30 - page 36

    EN 17 7644 01 00_AG ...

Manufacturer Beko Category Dishwasher

Documents that we receive from a manufacturer of a Beko DIN 6830 FX30 can be divided into several groups. They are, among others:
- Beko technical drawings
- DIN 6830 FX30 manuals
- Beko product data sheets
- information booklets
- or energy labels Beko DIN 6830 FX30
All of them are important, but the most important information from the point of view of use of the device are in the user manual Beko DIN 6830 FX30.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Beko DIN 6830 FX30, service manual, brief instructions and user manuals Beko DIN 6830 FX30. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Beko DIN 6830 FX30.

Similar manuals

A complete manual for the device Beko DIN 6830 FX30, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Beko DIN 6830 FX30 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Beko DIN 6830 FX30.

A complete Beko manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Beko DIN 6830 FX30 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Beko DIN 6830 FX30, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Beko DIN 6830 FX30, that we can find in the current document
3. Tips how to use the basic functions of the device Beko DIN 6830 FX30 - which should help us in our first steps of using Beko DIN 6830 FX30
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Beko DIN 6830 FX30
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Beko DIN 6830 FX30 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Beko DIN 6830 FX30?

Use the form below

If you did not solve your problem by using a manual Beko DIN 6830 FX30, ask a question using the form below. If a user had a similar problem with Beko DIN 6830 FX30 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)