English dropdown-ico

Manual Cisco Systems 6500

1278 pages 10.08 mb
Download

Go to site of 1278

Summary
  • Cisco Systems 6500 - page 1

    Corporate He adquarters Cisc o Syst ems , Inc . 170 West Ta sman Drive San Jos e, CA 95 134-1706 USA http://www.ci sco.com Tel: 408 526-4000 800 553- NETS (638 7) Fax: 408 526-4100 Catalyst 650 0 Series S w itc h Command Reference R ele ase 8 .1 Custome r Orde r Numb er: DOC- 78154 74= Text Par t Numb er: 78 -15474 -01 ...

  • Cisco Systems 6500 - page 2

    THE SPECIFICATIONS AND INFORMATION REG ARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOU T NOTICE. ALL STATEMENT S, INFORMATI ON, AND RECOMMENDA TIONS IN T HIS MANUAL ARE BELIEVED TO BE ACCURATE BU T ARE PRESEN TED WITHOUT WARRANTY OF ANY KIND, EXPRE SS OR IMPLIED. USERS MUST TAKE FULL RESPON SIBILITY FOR THEIR AP PLICATION OF ANY PRO ...

  • Cisco Systems 6500 - page 3

    iii Catalyst 6500 Series Switch Command Reference—Release 8.1 78-15474-01 CONTENTS Preface xx vii Audienc e xxvii Organi zation xx vii Relat ed D ocum ent atio n xxvi i Conv enti ons xxviii Obtain ing Docu mentati on xxix Cisco. com xxix Document ation C D-ROM xx ix Orderi ng Documenta tion xxx Docu m en ta t ion Fe ed bac k xxx Obtain ing Tec hn ...

  • Cisco Systems 6500 - page 4

    Cont ent s iv Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.1 78-15474-01 clea r bo o t au to -c onf ig 2-10 clea r bo o t de vi ce 2-11 clea r bo o t sy st em 2-1 2 clea r ca m 2-13 clear ca m no ti fic a tion 2-14 clear chan nel st atisti cs 2-15 clea r co n fi g 2-16 clear co nfi g pv la n 2-18 clea r co p s 2-19 clea r co u nt e ...

  • Cisco Systems 6500 - page 5

    Content s v Catalyst 6500 Series Switch Command Reference—Release 8.1 78-15474-01 clear logg ing cal lhome 2-49 clear l oggi ng ca llho me fr om 2-51 clear l oggi ng ca llho me re ply- to 2-5 2 clear logg ing cal lhome se veri ty 2-53 clear l ogging ca llho me smt p-ser ver 2-54 clear logg ing level 2-55 clear logg ing ser ver 2-57 clea r mls cef ...

  • Cisco Systems 6500 - page 6

    Cont ent s vi Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.1 78-15474-01 clea r qo s ma c- co s 2-91 clea r qo s ma p 2-9 2 clea r qo s pol i c ed -d s cp -ma p 2-94 clea r qo s pol i c er 2-95 clea r qo s sta ti sti c s 2-97 clea r ra d iu s 2-98 clea r rc p 2-9 9 clear rg mp sta tis t i cs 2-100 clea r se c ur i t y ac l 2-101 cl ...

  • Cisco Systems 6500 - page 7

    Content s vii Catalyst 6500 Series Switch Command Reference—Release 8.1 78-15474-01 clea r sys tem inf o-lo g com mand 2-134 clea r tac acs key 2-135 clea r tac acs serv er 2-13 6 clea r ti mezon e 2 -137 clea r top 2-1 38 clea r tr unk 2-139 clea r vl an 2-140 clea r vl an co unte rs 2-142 clea r vl an ma ppi ng 2-143 clea r vm ps r cp 2 -144 cl ...

  • Cisco Systems 6500 - page 8

    Cont ent s viii Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.1 78-15474-01 ping 2-188 pwd 2-19 1 quit 2-192 reconf irm vmps 2-193 reloa d 2-194 repeat 2-195 reset— ROM moni tor 2-19 7 reset— switch 2-198 restor e counter s 2-202 rollba ck 2-203 sessi on 2-204 set 2-205 set acco unting co mmands 2-206 set acco unti ng co nnect 2 ...

  • Cisco Systems 6500 - page 9

    Content s ix Catalyst 6500 Series Switch Command Reference—Release 8.1 78-15474-01 set cam 2-24 3 set ca m noti ficatio n 2- 245 set cdp 2 -248 set c han nelpr ot ocol 2-250 set ch ann el v lan cost 2-252 set co nfi g ac l nv ram 2-254 set confi g m ode 2-2 55 set cops 2-25 7 set cr y pt o ke y rs a 2-259 set de fa ult po rt stat us 2-260 set do ...

  • Cisco Systems 6500 - page 10

    Cont ent s x Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.1 78-15474-01 set ig mp leave -qu ery- type 2-294 set igmp mod e 2-295 set igmp qu erie r 2 -296 set ig mp ra teli mit 2-298 set igmp v 3-pro cessing 2-300 set inli nepower def aultal locati on 2-302 set in terf ace 2-303 set ip alia s 2-306 set ip dns 2-307 set ip dn s doma ...

  • Cisco Systems 6500 - page 11

    Content s xi Catalyst 6500 Series Switch Command Reference—Release 8.1 78-15474-01 set log ging ca ll home des tinati on 2-3 41 set log ging ca ll home fr om 2-343 set log ging ca ll home re ply-to 2-344 set lo ggin g c allhom e s everi ty 2- 345 set log ging ca ll home smt p-s erver 2-347 set lo ggin g c onsol e 2-348 set log ging hist ory 2 -34 ...

  • Cisco Systems 6500 - page 12

    Cont ent s xii Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.1 78-15474-01 set nt p ti mez one 2-390 set passw or d 2-391 set pbf 2-392 set pbf- map 2-3 94 set pbf v lan 2-396 set po rt a rp- insp ect ion 2-397 set p ort auxili aryvl an 2-398 set po rt b roa dca st 2 -400 set po rt c han nel 2-4 02 set po rt c ops 2-406 set po rt d ...

  • Cisco Systems 6500 - page 13

    Content s xiii Catalyst 6500 Series Switch Command Reference—Release 8.1 78-15474-01 set po rt qos tru st 2-44 9 set p ort q os trus t-dev ice 2-45 1 set p ort q os trus t-ext 2-452 set po rt rsvp ds bm-elect ion 2 -453 set po rt secur ity 2 -454 set po rt speed 2-457 set po rt sync- restart -del ay 2-458 set po rt trap 2-459 set po rt unica st - ...

  • Cisco Systems 6500 - page 14

    Cont ent s xiv Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.1 78-15474-01 set q os rx q-ra tio 2 -508 set qos s tati sti cs expor t 2-510 set qo s s tati stic s ex por t ag greg ate 2-511 set q os st atis tics exp ort des tinati on 2-51 2 set q o s st atis tics exp ort in terv al 2-5 13 set qo s s tati stic s ex por t po rt 2-514 s ...

  • Cisco Systems 6500 - page 15

    Content s xv Catalyst 6500 Series Switch Command Reference—Release 8.1 78-15474-01 set snmp gr oup 2-56 4 set sn mp if alia s 2-565 set s nmp no tify 2-566 set sn mp rmon 2-567 set sn mp rmon me mory 2-5 68 set s nmp ta rget addr 2-569 set snmp ta rget par ams 2-5 71 set sn mp tra p 2-573 set sn mp use r 2-576 set sn mp vie w 2- 578 set span 2-58 ...

  • Cisco Systems 6500 - page 16

    Cont ent s xvi Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.1 78-15474-01 set s pan tree po rtfast bpdu-f ilter 2-619 set s pan tree po rtfast bpdu-g uard 2 -620 set span tree po rtinst ancec ost 2-621 set s pan tree po rtinst ancep ri 2-623 set s pan tree po rtpri 2-625 set s pan tree po rtvlan cost 2 -626 set s pan tree po rtvlan ...

  • Cisco Systems 6500 - page 17

    Content s xvii Catalyst 6500 Series Switch Command Reference—Release 8.1 78-15474-01 set time zone 2 -668 set tr affi c m onit or 2 -669 set trunk 2- 670 set u dld 2-673 set u dld a ggr essiv e-m ode 2 -675 set ud l d inter val 2-676 set vlan 2-677 set vl an m ap ping 2-682 set vl an v erif y-p ort- provis ion ing 2-68 4 set vm ps down loa dmet h ...

  • Cisco Systems 6500 - page 18

    Cont ent s xviii Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.1 78-15474-01 show chann elpr oto col 2 -731 show chan nel traf fic 2-732 show conf ig 2-733 show conf ig mode 2- 739 show conf ig qos ac l 2-740 show cops 2-74 1 show count ers 2 -744 show cryp to key 2 -750 show defau lt 2-751 show dot1q -all- tagge d 2-752 show dot1x ...

  • Cisco Systems 6500 - page 19

    Content s xix Catalyst 6500 Series Switch Command Reference—Release 8.1 78-15474-01 show imag em ib 2-791 show inte rfac e 2-792 show ip ali as 2-794 show ip dn s 2-795 show ip ht tp 2-79 7 show ip pe rmi t 2-799 show ip r oute 2-80 1 show kerb eros 2- 803 show l2pr otocol- tunnel statist ics 2 -805 show lacp -chan nel 2-807 show lcpe rroract ion ...

  • Cisco Systems 6500 - page 20

    Cont ent s xx Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.1 78-15474-01 show mls exc lude prot ocol 2-858 show mls m ultic ast 2-8 59 show mls nde 2-863 show mls net flow-ro ute 2-864 show mls pbr -rou te 2-865 show mls s tat istic s 2-866 show mls ver ify 2-870 show modul e 2-871 show modu leinit 2-874 show msfcau tostat e 2-876 ...

  • Cisco Systems 6500 - page 21

    Content s xxi Catalyst 6500 Series Switch Command Reference—Release 8.1 78-15474-01 show port flowcontr ol 2-936 show port inlinep ower 2-938 show port jum bo 2-940 show port l2pro to col-t un nel 2-941 show port lacp-cha nnel 2-942 show por t mac 2-945 show port mac-add re ss 2- 947 show port negoti ation 2- 949 show por t pr bs 2-950 show por t ...

  • Cisco Systems 6500 - page 22

    Cont ent s xxii Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.1 78-15474-01 show qos in fo 2-998 show qos mac- cos 2-100 4 show qos maps 2-1006 show qos pol icer 2-1009 show qos pol icy-so urce 2-10 11 show qos rs vp 2- 1012 show qos st atis ti cs 2-1 013 show qos st atis tics expo rt info 2-1015 show qos st atus 2 -1016 show radi u ...

  • Cisco Systems 6500 - page 23

    Content s xxiii Catalyst 6500 Series Switch Command Reference—Release 8.1 78-15474-01 show snmp rmon memory 2 -1059 show snmp ta rget addr 2-106 0 show snmp ta rget param s 2 -1062 show snmp use r 2-1064 show snmp vi ew 2-1066 show span 2-1068 show spant ree 2-1070 show spant ree bac kbonefa st 2-1 074 show spant ree bl oc kedpor ts 2-10 75 show ...

  • Cisco Systems 6500 - page 24

    Cont ent s xxiv Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.1 78-15474-01 show time 2-1131 show timez one 2-113 2 show top 2-1133 show top re port 2-1135 show traf fic 2-1137 show trun k 2-1138 show udld 2-1141 show user s 2-1143 show vers ion 2-1144 show vlan 2-1147 show vlan counte rs 2-11 52 show vlan verif y- port -pr ovis ion ...

  • Cisco Systems 6500 - page 25

    Content s xxv Catalyst 6500 Series Switch Command Reference—Release 8.1 78-15474-01 unset= varna me 2-1185 var name = 2-1186 veri fy 2-1187 wait 2-1188 whichbo ot 2-1189 write 2-1190 write te ch-su pport 2-1193 APPENDI X A Acronyms A-1 APPENDI X B Acknowledgment s for Open -So urce Soft ware B-1 I NDEX ...

  • Cisco Systems 6500 - page 26

    Cont ent s xxvi Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.1 78-15474-01 ...

  • Cisco Systems 6500 - page 27

    xxvii Catalyst 6500 Series Switch Command Reference—Release 8.1 78-15474-01 Preface This pr efa ce d escri b es t he a udie nce, o rganizatio n, an d co nv entions o f thi s pu bli cati on and p rovid es information on how to obtain relate d documentation. Audience This pu bli cat ion is fo r experi ence d network ad mini str ator s who a re r es ...

  • Cisco Systems 6500 - page 28

    xxvii i Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.1 78-15474-01 Preface Conv ent ions • System Message Guid e—Cata lyst 6500 Serie s, 4000 F am ily , Catalyst 2948G, and Catalyst 2980G Switc hes • Catalyst 6500 Se rie s Qui ck Softw are Configur ation G uid e • A TM Software Configuration Guid e and Com mand Re ference f ...

  • Cisco Systems 6500 - page 29

    xxix Catalyst 6500 Series Switch Command Reference—Release 8.1 78-15474-01 Pre face Obtaining Docume ntation Notes us e the follo win g con v ention s: Note Means r e ader t ak e note . Notes contain helpf ul suggestions or reference s to material not co vered in the publica tion. Obtaining Documentation Cisco provides several ways to obtain docu ...

  • Cisco Systems 6500 - page 30

    xxx Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Preface Obtain in g Technical Assis ta nce Ordering Docume ntation Y ou can find ins tr uct ions for orde ring do cu me nta tion a t t his U RL: http://www .cisco.co m/uni verc d/cc/td/doc/e s_inpck/pdi.htm Y ou can ord er Cisco docum ent ation in these ways: • Re gis ...

  • Cisco Systems 6500 - page 31

    xxxi Catalyst 6500 Series Switch Command Reference—Release 8.1 78-15474-01 Pre face Ob ta ining Additional Publications and Information Opening a T AC Cas e The onlin e T AC Case Open T ool ( http://www .cisco.co m/tac/ca seopen ) is the fastest way to open P3 and P4 cases. (Y our netwo rk i s minim ally impa i red or you re quire pr oduct i nfor ...

  • Cisco Systems 6500 - page 32

    xxxii Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Preface Obtainin g Addi ti ona l Publicat io ns and Info rmatio n • Pack et magazine is the Cisco quarterl y publication that pro vides the latest networking t rends, technol ogy breakthr oughs, an d Cisco produ cts and sol utions to help industry pr ofession als ge ...

  • Cisco Systems 6500 - page 33

    C HA PTER 1-1 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 1 Command-Line Interface s This chapt er desc ribes the c ommand- line inte rfaces (CL I) av ailab le on the Catal yst 6500 seri es switches and co ntains t hese s ectio ns: • Switch CLI, page 1-1 • R OM Monit or CLI, page 1-17 For inform ation regar ding th ...

  • Cisco Systems 6500 - page 34

    1-2 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapte r 1 Command -Line Interf aces Switch CLI Note EI A/TIA- 232 was known as RS-232 before its accepta nce as a standa rd by the Electron ic Indust ries Alliance and T elecommunicatio ns Industry Associat io n. Accessing the Switch C LI via the Console Port (EIA/TIA- ...

  • Cisco Systems 6500 - page 35

    1-3 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 1 Command-L in e Interfaces Switch CLI After con ne cting thr ough a T elne t se ssion, you see th is di splay: host% telnet cat6000-1.cisco.com Trying 172.16.44.30 ... Connected to cat6000-1. Operating the Switch CLI This secti on describe s command modes and fun ...

  • Cisco Systems 6500 - page 36

    1-4 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapte r 1 Command -Line Interf aces Switch CLI Using the Command-Line Editing Features Catalyst 650 0 seri es swit ch s oft ware i ncl udes an enha nce d e diti ng mode tha t p rovides a set of e dit ing ke y f u nc tions simil ar to th ose of the Emac s ed ito r . Y o ...

  • Cisco Systems 6500 - page 37

    1-5 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 1 Command-L in e Interfaces Switch CLI In the follo wing e xample, when you enter the letter s conf and press the Ta b ke y , the system provides the comp lete comm and: Console> (enable) conf<Tab> Console> (enable) configure If you en ter a se t of ch ...

  • Cisco Systems 6500 - page 38

    1-6 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapte r 1 Command -Line Interf aces Switch CLI Deleti ng Entries Perform on e of thes e tasks to delete command e ntries if you make a mistake or chan ge your mi nd: Scrolling Down a Line or a Screen When you use th e help facilit y to l ist the comm ands in a p articu ...

  • Cisco Systems 6500 - page 39

    1-7 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 1 Command-L in e Interfaces Switch CLI Redisplayi ng the Current Command Line If you ente r a comma nd and the syst em suddenl y sends a message to your scre en, you can recall you r curr ent co mman d line en tr y . T o do so , perf orm this task : Transposing Mi ...

  • Cisco Systems 6500 - page 40

    1-8 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapte r 1 Command -Line Interf aces Switch CLI Using Command Aliases Like regular com mands , alia ses are no t case se nsitive. Ho we ver , unlike regular command s, some aliases cannot be abbreviat ed. See Ta b l e 1 - 2 for a list of switch CLI aliases that cannot b ...

  • Cisco Systems 6500 - page 41

    1-9 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 1 Command-L in e Interfaces Switch CLI Accessing Command He lp T o see a list of top-le vel comma nds and comm and cate gories, type help in norma l or pri vile ged mode . Context-sensit ive help (usage and synt ax inf orma tio n) for i ndividual c om mands c an b ...

  • Cisco Systems 6500 - page 42

    1-10 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapte r 1 Command -Line Interf aces Switch CLI session Tunnel to ATM or Router module set Set commands, use 'set help' for more info show Show commands, use 'show help' for more info slip Attach/detach Serial Line IP interface squeeze Reclaim space ...

  • Cisco Systems 6500 - page 43

    1-11 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 1 Command-L in e Interfaces Switch CLI Y ou can designat e ports by entering th e modu le and por t numbe r pairs, separat ed by commas . T o spe cify a rang e of po rts, use a d as h ( -) bet wee n the mo dule n umb er and po rt n umb er p airs . Da she s take p ...

  • Cisco Systems 6500 - page 44

    1-12 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapte r 1 Command -Line Interf aces Switch CLI Using Command Self-Repeat Use the com mand self -r epea t functi on to display matches to all possible keywords if a st ri ng repres ents a unique match. If a unique match is not found, the longest matching string is pro ...

  • Cisco Systems 6500 - page 45

    1-13 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 1 Command-L in e Interfaces Switch CLI Using the CL I String Search The pat tern in the comm and output is refer red to as a str ing. The CLI str ing search featu re allo ws you to sear ch or fil ter a ny show or mor e command outp ut and allows you to search and ...

  • Cisco Systems 6500 - page 46

    1-14 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapte r 1 Command -Line Interf aces Switch CLI T o enter th ese special ch aracters as sing le-chara cter pattern s, remov e the special m eaning b y preceding each ch aracter with a backsl ash (). These e xample s are s ingle-cha racte r patterns matchin g a dollar ...

  • Cisco Systems 6500 - page 47

    1-15 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 1 Command-L in e Interfaces Switch CLI Multiple- Character Pat terns When crea ting re gular e xpressions, you can also sp ecify a pattern containing m ultiple c h aracters . Y ou creat e mul tipl e-ch arac ter r egular expr essio ns by jo ining l ette rs, dig it ...

  • Cisco Systems 6500 - page 48

    1-16 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapte r 1 Command -Line Interf aces Switch CLI T o use multiplier s with multiple-char acter patterns, you encl ose the pattern in parenth e ses. In the follo wing example, the pattern matches an y number of the multiple-c haracter string ab: (ab)* As a more comple x ...

  • Cisco Systems 6500 - page 49

    1-17 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 1 Command-L in e Interfaces ROM Moni tor CLI For exam pl e: _1300_ matc hes any stri ng that has 1300 somew here in t he str ing. Th e string ’ s 1300 ca n be preced ed by or end with a spa ce, brace, or co mma. Fo r example : {1300 - or {1300: matches the regu ...

  • Cisco Systems 6500 - page 50

    1-18 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapte r 1 Command -Line Interf aces ROM Moni to r CLI The manu al bo ot command ha s the following syntax: Note En te r t he copy file-id { tftp | flash | fil e- id } co mma nd to obt ai n an ima ge f ro m t h e ne twork . • boot — Boot fr om R O M • boot [ -xv ...

  • Cisco Systems 6500 - page 51

    C HA PTER 2-1 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 2 Catalyst 6500 Series Switch and ROM Monitor Commands This chap ter co ntain s an alpha betica l listin g of all switc h and R OM monitor comman ds a v ail abl e on the Catalyst 6500 series switches. For inform at ion r egardin g A TM m odu le- rel ate d com ma ...

  • Cisco Systems 6500 - page 52

    2-2 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Cataly st 6500 S eries Switch and ROM Monitor Commands alias alias T o set and display command aliases, use the alias command. alias [ name = value ] Syntax D escr i pti on Defaults Thi s command has no de fault setti ngs. Comma nd T ypes R OM moni tor co mman ...

  • Cisco Systems 6500 - page 53

    2-3 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s alias k=stack s=set rommon 4 > s PS1=rommon ! > BOOT=bootflash:RTSYNC_llue_11,1;slot0:f1,1; ========================================================================= Relat e d Commands unalias ...

  • Cisco Systems 6500 - page 54

    2-4 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands boot boot T o b oot up an extern al proc es s, use t he boot co mman d. boot [ -x ] [ -v ] [ device : ][ imagename ] Syntax D escr i pti on Defaults Thi s command has no de fault setti ngs. Comma nd T ypes ...

  • Cisco Systems 6500 - page 55

    Chapter 2 Ca talyst 6 500 Series Swi tch and ROM M onitor Comm ands cd 2-5 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 22 cd T o s et the default Fla sh device for t he sy stem , use t he cd comm and. cd [[ m/ ] de vice : ] Syntax Descript ion Defaults The de fault Flash device is bootfl ash. Comma nd T ypes Swit ch co ...

  • Cisco Systems 6500 - page 56

    2-6 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear acl lo g clear acllog T o disable A CL log rate limiting, use the cl ear ac llog command. clear ac llog Syntax D escr i pti on This comm a nd ha s n o argume nts or keyword s. Defaults Thi s command h ...

  • Cisco Systems 6500 - page 57

    2-7 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clea r al i as clear alias T o clear the ab brevia ted versio ns of commands, use the clear alia s comman d. clea r alias { name | all } Syntax Descript ion Defaults Thi s command has no de fault setti ...

  • Cisco Systems 6500 - page 58

    2-8 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear arp clear arp T o delete a specif ic entry or all entries from the ARP table , use the cl ear arp command. clea r arp [ all | dynamic | perm an ent | sta tic ] { ip_ addr } Syntax D escr i pti on Defa ...

  • Cisco Systems 6500 - page 59

    2-9 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clea r banner m otd clear banner motd T o cl ear the m essag e- of-t he-da y banne r, use th e clear banner motd command . clear banne r motd Syntax Descript ion This c omm and ha s no a rgume nts o r ...

  • Cisco Systems 6500 - page 60

    2-10 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear boot aut o-config clear boot auto-conf ig T o clear the conte nt s of the CONFIG_ FILE envir onmen t vari able u sed to speci fy th e config ura tion f iles used during boo tup, use the cl ear boot a ...

  • Cisco Systems 6500 - page 61

    2-11 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear boot dev ice clear boot device T o clear the conten ts of the CONFIG _FILE envir onment variable used to specify the NAM startup configuratio n files, use the clea r boot device comma nd . clear ...

  • Cisco Systems 6500 - page 62

    2-12 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear boot sy stem clear boot system T o cl ear the con ten ts of the B OOT envi ronm en t va ria ble a nd t he c onf igur ati on regi ster set ting, u se the clear boo t system com mand. clear boot syste ...

  • Cisco Systems 6500 - page 63

    2-13 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear c am clear cam T o delete a specif ic entry or all entries from the CAM table, use the clea r cam command . clear ca m mac _addr [ vl an ] clear ca m { dyn am ic | sta tic | permanent } [ vl an ...

  • Cisco Systems 6500 - page 64

    2-14 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear cam no tificat io n clear cam notification T o clear th e CAM notif icati on counter s and hi story log, use the cl ear cam notif ication comman d. clear ca m notif ication { all | counters | history ...

  • Cisco Systems 6500 - page 65

    2-15 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear channel st atisti cs clear channel sta tistics T o clear P AgP statis tical info rmation, u se the clear cha nnel statistic s co mman d. clear cha nnel statisti cs Syntax Descript ion This c omm ...

  • Cisco Systems 6500 - page 66

    2-16 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear conf i g clear config T o clear the system or module conf iguration information store d in NVRAM, use the clear c onf ig comm and. clear co nfi g { mod | rmo n | all | snmpv3 | acl nv r am | int erf ...

  • Cisco Systems 6500 - page 67

    2-17 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear config Module 1 configuration cleared. host% This e xample shows how to del ete all the configuratio n information f or the Catalyst 6500 series switch es: Console> (enable) clear config all ...

  • Cisco Systems 6500 - page 68

    2-18 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear conf i g pvlan clear config pvlan T o cle ar all priv ate VL AN configurat ions in the syst em inclu ding por t mappi ngs, use the clea r co nfig pvlan comm and. clear co nfi g pvlan Syntax D escr i ...

  • Cisco Systems 6500 - page 69

    2-19 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clea r co ps clear cops T o cl ear Comm on Op en Po licy Se rvi ce ( CO PS) co nfigurat ions, us e t he c lea r cops comman d. clear co ps roles ro l e 1 [ ro l e 2 ]... clear co ps all-rol es clear c ...

  • Cisco Systems 6500 - page 70

    2-20 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear cops This example shows how to clear al l COPS ser vers: Console> (enable) clear cops server all All COPS servers cleared. Console> (enable) This example shows how to cle ar a sp ecific COPS se ...

  • Cisco Systems 6500 - page 71

    2-21 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clea r count ers clear counters T o cle ar MAC counters, Ethe rCh annel MAC counters , port count ers , and t he cha nn el tra ffi c perc en tile , use the clea r counters co mmand. clear co unters [ ...

  • Cisco Systems 6500 - page 72

    2-22 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear cry pto key rsa clear crypto key rsa T o remov e all RSA public-ke y pairs, use the clea r crypto k ey rsa comman d. clear cry pto key rsa Syntax D escr i pti on This comm a nd ha s n o keywords or a ...

  • Cisco Systems 6500 - page 73

    2-23 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear dot1x con fig clear dot1x config T o disable dot1x on all ports and return v alues to the default settings, u se the clear dot 1x conf ig comm and. clear dot 1x config Syntax Descript ion This c ...

  • Cisco Systems 6500 - page 74

    2-24 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear ftp clear ftp T o clea r File T ransf er Protocol (FTP) param eters, use the c lear ftp co mmand. clear ft p [ username | password | passi ve ] Syntax D escr i pti on Defaults Thi s command has no de ...

  • Cisco Systems 6500 - page 75

    2-25 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear gmr p statistics clear gmrp statistics T o clear all the GMRP stati s tics infor ma tion f rom a specif ied VLAN or all VLA Ns, use th e clear gmrp statistics command. clear gmr p statisti cs { ...

  • Cisco Systems 6500 - page 76

    2-26 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear gvr p stat is ti cs clear gvrp s tatistics T o clear all the GVRP statis tics info rmation , use the clea r gvrp stati stics com mand. clear g vrp st ati st i cs { mo d/port | all } Syntax D escr i p ...

  • Cisco Systems 6500 - page 77

    2-27 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear i gmp statist ics clear igmp statistics T o cl ear IGMP snoopi ng stati sti cal in form a tion, use the clear igmp statistics command. clear ig mp stat istics Syntax Descript ion This c omm and ...

  • Cisco Systems 6500 - page 78

    2-28 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear ip ali as clear ip alias T o clear IP al iases that were s et using the set ip alias command , use the clear ip alias command . clear ip alias { name | all } Syntax D escr i pti on Defaults Thi s com ...

  • Cisco Systems 6500 - page 79

    2-29 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear ip dns domain clear ip dns domai n T o clear the de fault DNS domain na me, use the clear ip dns domain command. clear ip dns domain Syntax Descript ion This c omm and ha s no a rgume nts o r ke ...

  • Cisco Systems 6500 - page 80

    2-30 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear ip dn s server clear ip dns server T o remov e a DNS s erver from the DNS serv er listing, use the clea r ip dns server comm and. clear ip dns serv er { ip_ad dr | all } Syntax D escr i pti on Defaul ...

  • Cisco Systems 6500 - page 81

    2-31 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear ip pe rmi t clear ip permit T o remov e a specified IP address and mask or all IP addresses and masks from the permit list, use the clear ip permit comman d. clear ip permit al l clear ip permit ...

  • Cisco Systems 6500 - page 82

    2-32 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear ip pe rm i t Console> (enable) clear ip permit all IP permit list cleared. WARNING IP permit list is still enabled. Console> (enable) Relat e d Commands set ip permit show ip per mit ...

  • Cisco Systems 6500 - page 83

    2-33 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear i p route clear ip route T o delete IP routi n g table entries, use the clear ip r oute comma nd. clear ip r oute destination gat eway Syntax Descript ion Defaults The defau lt is destination . ...

  • Cisco Systems 6500 - page 84

    2-34 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear kerb eros clie nts m and atory clear kerberos clients ma ndatory T o disable mandatory Kerb eros authentica tion for services on the network, use the clear k erberos clients mandatory comm and. clear ...

  • Cisco Systems 6500 - page 85

    2-35 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clea r ke rber os cred e nti a ls for w ard clear kerberos creden tials forward T o disa ble credent ials forw arding, u se the clea r kerber os credent ials f orward command. clear ke rberos cr edent ...

  • Cisco Systems 6500 - page 86

    2-36 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear kerb eros cre ds clear kerberos creds T o de lete all t he Ke rberos cr edentials, u se the clear ke rbero s creds command. clear ke rbero s creds Syntax D escr i pti on This comm a nd ha s n o argum ...

  • Cisco Systems 6500 - page 87

    2-37 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear ker ber os re alm clear kerberos realm T o clear a n entry t hat m aps th e nam e of a K erb eros rea lm to a D NS domai n name or a hos t na me , use the clea r k er beros rea lm command. clea ...

  • Cisco Systems 6500 - page 88

    2-38 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear kerb eros se rv er clear kerberos server T o clea r a s pecifi ed K ey D istrib ution Cent er (KDC) entry , use the clear k erber os server command. clear k erb eros s erver ke rberos_realm { host na ...

  • Cisco Systems 6500 - page 89

    2-39 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clea r key conf i g-k e y clear key config-key T o remo ve a pri vate 3DE S key , use the clear ke y config-key command . clear ke y config -key string Syntax Descript ion Defaults Thi s command has n ...

  • Cisco Systems 6500 - page 90

    2-40 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear l2prot ocol- tun nel cos clear l2protoco l-tunnel c os T o cl ear the L a yer 2 p rotoc ol tunne ling CoS value fo r all i ng ress tu nne ling por ts, use the c lea r l2protocol-tunnel c os command. ...

  • Cisco Systems 6500 - page 91

    2-41 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear l2pr oto c ol- tunn el s t atis t ics clear l2protoco l-tunnel sta tistics T o cl ear Lay er 2 pr ot ocol tu nnel ing stat ist ics on a port o r on al l tu nne lin g p or ts, u se the c lea r l2 ...

  • Cisco Systems 6500 - page 92

    2-42 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear lac p-ch annel st ati st i cs clear lacp-channel statistic s T o clea r Link Aggr egation Control Protocol (LA CP) statistical informa tion, use the clear lacp-channe l statistics command. clear la c ...

  • Cisco Systems 6500 - page 93

    2-43 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear lda clear lda T o remove the ac celerated server lo ad balancin g (ASLB ) MLS entries or MA C addresses from the swit ch, use the cl ear lda comman d. clear lda mls clear lda mls [ destination i ...

  • Cisco Systems 6500 - page 94

    2-44 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear lda Usage Guid el i nes This c omm and is suppor ted on ly o n sw itc he s configu red w ith th e Supe r visor En gine 1 wi th L aye r 3 Switching Engine WS-F6K-PFC (Pol icy Feature Card) . Ente rin ...

  • Cisco Systems 6500 - page 95

    2-45 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clea r lo ca luse r clear localuser T o delete a loca l user a ccount f rom the switch, use the clear localus er command. clear lo caluser name Syntax Descript ion Defaults Thi s command has no de fau ...

  • Cisco Systems 6500 - page 96

    2-46 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear log clear log T o delet e module , system error log, or dump l og entri es, use the clea r log co mmand . clear lo g [ mo d ] clear lo g dump Syntax D escr i pti on Defaults Thi s command has no de f ...

  • Cisco Systems 6500 - page 97

    2-47 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear log comma nd clear log comma nd T o clear the command log entry table, u s e t h e clear log command co mmand. clear lo g command [ mod ] Syntax Descript ion Defaults Thi s command has no de fau ...

  • Cisco Systems 6500 - page 98

    2-48 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear log gi ng buffer clear loggi ng buffer T o clear the s ystem logg ing bu f f er , use the clea r loggin g buffe r comma nd. clear lo gging b uffer Syntax D escr i pti on This comm a nd ha s n o argum ...

  • Cisco Systems 6500 - page 99

    2-49 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear logging callhome clear logging cal lhome T o retore the CallHome def ault values or to clea r a d estination addr ess used in the CallHom e feature, use the clea r logging destination co mmand . ...

  • Cisco Systems 6500 - page 100

    2-50 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear log gi ng callhom e Relat e d Commands clear logging call home fr om clear logging callhome reply-t o clear logging callhome severit y clear logg ing ca llho me sm tp-s erver set logging callhome set ...

  • Cisco Systems 6500 - page 101

    2-51 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear logg ing cal lhome from clear loggi ng callhome fro m T o clear the Fro m address used by the Call Home featu re, use the clear logging from comm and. clear logging call home fr om Syntax Descri ...

  • Cisco Systems 6500 - page 102

    2-52 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear log ging call hom e reply- to clear loggi ng callhome re ply-to T o clea r the R eply- to address u sed by the CallHome featur e, use the clear logg i ng reply- to command. clear lo gging reply- to S ...

  • Cisco Systems 6500 - page 103

    2-53 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear logging callhome severity clear logging cal lhome severity T o clear the sev erity le vel u sed by the CallHome fe ature an d return it to the d efault value of 2, use th e clear lo gging se ver ...

  • Cisco Systems 6500 - page 104

    2-54 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear log gi ng callhome smtp-s erv er clear logging cal lhome smtp -server T o clear an SMTP ser ver from the list of CallHome SMTP serv ers, use the clea r logging smt p-ser ver comm and. clear logg ing ...

  • Cisco Systems 6500 - page 105

    2-55 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear loggi ng level clear logging leve l T o reset the logging le vel for a fa cility or for all f acilities to thei r default settings, u se the cl ear loggi ng lev el command. clear logging lev el ...

  • Cisco Systems 6500 - page 106

    2-56 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear log ging leve l Defaults Thi s command has no de fault setti ngs. Comma nd T ypes Swit ch co mman d. Command Mode s Pri vile ged. Exam ples This example shows how to reset a specif ic facility b ack ...

  • Cisco Systems 6500 - page 107

    2-57 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear logging server clear logging server T o delete a syslog serve r from the system log serv er table, use the cl ear logg ing ser ver comm and. clear l og gin g server ip_ad dr Syntax Descript ion ...

  • Cisco Systems 6500 - page 108

    2-58 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear mls cef clear mls cef T o cl ear Cisco Ex pre ss Forwarding ( CEF) su mmar y s tat ist ics, us e the clear mls cef co mmand. clear mls cef Syntax D escr i pti on This comm a nd ha s n o argume nts or ...

  • Cisco Systems 6500 - page 109

    2-59 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear mls cef rpf statistics clear mls cef rpf statistics To clear the coun ters for packets and bytes that failed the hardware RPF check, us e the clear mls cef rpf statist ics command. Syntax Descri ...

  • Cisco Systems 6500 - page 110

    2-60 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear mls ent ry clear mls entry T o clea r MLS entr ies in the Cata lyst 6500 se ries switches , use the clear mls entr y command. clear mls entry [ ip | ipx ] all clear mls entry ip destination ip_addr_s ...

  • Cisco Systems 6500 - page 111

    2-61 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clea r ml s ent ry Up to 16 routers can be included e xplicitly as MLS-RPs. T o use a rou ter as an MLS, yo u must meet th ese condi tions: • The route r must be in cluded (either e xplicitly or aut ...

  • Cisco Systems 6500 - page 112

    2-62 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear mls entry cef clear mls entry ce f T o clear CEF adjac ency statisti cs, use the clea r mls entry cef command. clear mls entry cef adj acency clear mls entry cef ip [[ ip_ad dr /] mask_len ] adjacenc ...

  • Cisco Systems 6500 - page 113

    2-63 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear ml s exclude pr otocol clear mls exclude protocol T o rem ove a protocol por t that h as been exc lu ded from s hortc ut ting u s i ng the set ml s e xclude protocol comm and, use the clear mls ...

  • Cisco Systems 6500 - page 114

    Chapter 2 Ca talyst 6 500 Series Swi tch and ROM M onitor Comm ands clear mls multicast statistics 2-64 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 22 clear mls multicast statistics T o remov e ML S multicast sta tistics main tained b y the MSFC o n the switc h, use the clea r mls multicast statistics command . clear m ...

  • Cisco Systems 6500 - page 115

    2-65 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear mls nd e flow clear mls nde flow T o reset t he NDE f ilters in the Catalyst 6500 se ries switch es, use t he clear mls nde flow com mand. clear mls nde flo w Syntax Descript ion This c omm and ...

  • Cisco Systems 6500 - page 116

    2-66 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear m ls st atistics clear mls statistics T o clear har d ware-in stalled MLS statistics entries, u se the clea r mls statis tics comm and. clear mls statistics clear mls statisti cs prot ocol { protocol ...

  • Cisco Systems 6500 - page 117

    2-67 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear mls st atistics This exampl e shows ho w t o clear prot ocol 17, p ort 19344 fro m the stati stics collecti on: Console> (enable) clear mls statistics protocol 17 19344 Protocol 17 port 1934 ...

  • Cisco Systems 6500 - page 118

    2-68 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear m ls st atistics entry clear mls statistics en try T o clear statistics for MLS entries, use the clea r mls s tatist ics entr y command. clear mls statistics entry [ ip | ipx ] al l clear mls statist ...

  • Cisco Systems 6500 - page 119

    2-69 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear ml s statist ics entry When en ter ing th e IPX ad dress s yntax, us e the fol lowing form at: • IPX net address—1..FFFFFFFE • IPX node address—x.x.x where x is 0..FFFF • IPX address? ...

  • Cisco Systems 6500 - page 120

    2-70 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear m odu le pass w ord clear module pa ssword T o clear the password set by the password [ usernam e ] N AM command, us e the cl ear m odu le pa sswor d comm and. clear modul e password mod Syntax D esc ...

  • Cisco Systems 6500 - page 121

    2-71 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear multicast router clear multicast router T o clear manual ly config ured multicast rout er ports from the multic ast router port list, use the clea r multicast r outer command. clear multi cast r ...

  • Cisco Systems 6500 - page 122

    2-72 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear ntp ser ver clear ntp server T o r e move one or m ore s erver s f rom th e NT P s erver ta ble, u s e t he c lear n tp server command. clear ntp ser ver { ip_addr | all } Syntax D escr i pti on Defa ...

  • Cisco Systems 6500 - page 123

    2-73 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clea r nt p tim ez one clear ntp timezone T o return the time zo ne to its default, UTC, use the clear ntp timezone command. clear ntp ti mezone Syntax Descript ion This c omm and ha s no a rgume nts ...

  • Cisco Systems 6500 - page 124

    2-74 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear pbf clear pbf T o remo ve the MA C address fo r the PFC2, use th e clear pbf command . clear pbf Syntax D escr i pti on This comm a nd ha s n o keywords or argume nts. Defaults Thi s command has no d ...

  • Cisco Systems 6500 - page 125

    2-75 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear pbf-map clear pbf-map T o clear PBF map infor mation, use the cl ear p bf-ma p command . clear pbf- map { vlan vlan } | all | { ip_addr_ 1 } { ma c_add r_1 } { vlan_1 } { ip_ad dr_2 } { mac_ add ...

  • Cisco Systems 6500 - page 126

    2-76 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear pbf -m ap This e xample sho ws h o w to clear all adjac en c y inf o rm ati on and A CLs that wer e cr eat ed by ente ri ng the set pbf -ma p command: Console> (enable) clear pbf-map all ACL &apos ...

  • Cisco Systems 6500 - page 127

    2-77 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear pbf vlan clear pbf vlan T o clear PBF-e nabled VLANs and re mov e them from NVRAM, u se the clea r pbf vlan co mmand. clear pbf vl an vlan Syntax Descript ion Defaults Thi s command has no de fa ...

  • Cisco Systems 6500 - page 128

    2-78 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear port broa dcast clear port broadca st T o disable broadcas t/multicast suppression on one or more ports, use the clear port br oa dcast comm and. clear port broadcast mod/po rt Syntax D escr i pti on ...

  • Cisco Systems 6500 - page 129

    2-79 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear po rt cops clear port cops T o clear por t roles, use the clear port cops comman d. clear por t cops mod / po rt ro le s ro l e 1 [ ro l e 2 ]... clear por t cops mod / po rt all-roles Syntax De ...

  • Cisco Systems 6500 - page 130

    2-80 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear port hos t clear port host T o cle ar the port co nfigurati on for opti mizing a hos t connec tion, use the clear port host comm and. clear por t host mod / port Syntax D escr i pti on Defaults Thi s ...

  • Cisco Systems 6500 - page 131

    2-81 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear port qos cos clear port qos cos T o return the v alues set by the set port qos cos command to the d efault settings for all specified ports, use the clea r port qo s cos co mmand. clear por t qo ...

  • Cisco Systems 6500 - page 132

    2-82 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear port se curity clear port security T o clear al l MA C addresses o r a s peci fic MA C addr es s fr o m th e lis t of s ecure MA C addresses o n a p o rt, use the clea r port securit y command. clear ...

  • Cisco Systems 6500 - page 133

    2-83 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear pvla n mapping clear pvlan mapping T o d ele te a pr ivate VLAN ma ppin g, use t h e clear pvlan mapping command. clear pvlan mapping primar y_vlan { isol ated_vl an | commu nity_ vlan | twoway_ ...

  • Cisco Systems 6500 - page 134

    2-84 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear qos acl clear qos acl T o remo ve v arious A CL conf igur ation s, use the clear qos ac l comman d. clea r qos acl acl_name [ editbuf fer_index ] clea r qos acl defaul t-act ion { ip | ipx | mac | al ...

  • Cisco Systems 6500 - page 135

    2-85 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clea r qos acl Exam ples This e xample sho ws ho w to detach an A C L fr om all int erfaces: Console> (enable) clear qos acl map my_acl all Hardware programming in progress... ACL my_acl is detache ...

  • Cisco Systems 6500 - page 136

    2-86 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear qos conf ig clear qos config T o the default setting s and delete the CoS assigned to MAC addresses, use the clea r qos conf ig comm and to retur n the valu es set by t he set qos com mand . clear qo ...

  • Cisco Systems 6500 - page 137

    2-87 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear qos cos-dscp -map clear qos cos-dsc p-map To clear CoS-to-DSCP mappin g set by the set qos cos- dscp-map command and return to the default setting, u se the c lea r qos co s-ds cp-m ap command . ...

  • Cisco Systems 6500 - page 138

    2-88 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear qos dscp-c os- map clear qos dscp-c os-map To cl ear DS CP-to- CoS mappi ng se t b y the set qo s dscp-c os-m ap command and return to the de fault setting, u se the c lea r qos d scp- cos-m ap comma ...

  • Cisco Systems 6500 - page 139

    2-89 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear q os dscp-mut ation-ta ble-map clear qos dscp-mutati on-table-ma p T o clear the DSC P mutation tabl e map, use the clear qos dscp-mutation-tabl e-map command . clear qos dscp-mutation-table-map ...

  • Cisco Systems 6500 - page 140

    2-90 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear qos ipp rec-ds cp-m ap clear qos ipprec -dscp-map T o reset the m apping set b y the set qos ippr ec-dscp-map command to t h e default set ting, use t he clea r qos ippre c-dscp-map comm and. clear q ...

  • Cisco Systems 6500 - page 141

    2-91 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear q os mac-cos clear qos mac-c os T o clear the v alues set by the set qos mac-cos command, use the clear qos m ac-cos co mmand. clea r q o s m a c- co s dest_m ac [ vlan ] clear q o s ma c- co s ...

  • Cisco Systems 6500 - page 142

    2-92 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear qos m ap clear qos map T o return the v alues to the default settin gs, use the clear qos map comm and. clear qos map port_typ e tx | rx Syntax D escr i pti on Defaults The de fault mapping s for all ...

  • Cisco Systems 6500 - page 143

    2-93 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clea r qo s map Relat e d Commands set qos map show qos maps ...

  • Cisco Systems 6500 - page 144

    2-94 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear qos pol iced-d sc p-m ap clear qos policed -dscp-map T o reset t h e police r-t o-dscp map ping tabl e to the defaults, use the cle a r qos p oliced-dscp-map . clear qos policed-dscp-map [ normal-rat ...

  • Cisco Systems 6500 - page 145

    2-95 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear qos polic er clear qos policer T o clear poli cing rules from N VRA M , use th e clear qos policer command . clear qos po licer microflo w microflow_name | all clear qo s pol ic er aggreg ate ag ...

  • Cisco Systems 6500 - page 146

    2-96 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear qos pol icer This exam pl e sh ows how t o clear a specif ic aggre gate policing rule: Console> (enable) clear qos policer aggregate my_micro my_micro QoS microflow policer cleared. Console> (e ...

  • Cisco Systems 6500 - page 147

    2-97 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear qo s statisti cs clear qos statistics T o clear QoS stati stic counte rs, use the clear qos sta tistics command. clear qos statisti cs [ aggregate -policer [ poli cer_nam e ]] Syntax Descript io ...

  • Cisco Systems 6500 - page 148

    2-98 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear radi us clear radius T o clear one or all of t he RADIUS serv ers from th e RADIUS se rve r table o r remo ve a shar ed key e ntry , use the clear ra dius command. clear r ad iu s server a l l clear ...

  • Cisco Systems 6500 - page 149

    2-99 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clea r rc p clear rcp T o clear rcp informa tion for file transfers, use the clear rcp co mmand. clea r rcp Syntax Descript ion This c omm and ha s no a rgume nts o r keywords. Defaults Thi s command ...

  • Cisco Systems 6500 - page 150

    2-100 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear rgmp s tatistic s clear rgmp statistics T o clear RGMP s tatistics informati on for all VLANs, use the clear r gmp statist ics command. clear r gmp statisti cs Syntax D escr i pti on This comm a nd ...

  • Cisco Systems 6500 - page 151

    2-101 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear securit y acl clear security acl T o remove a specific acces s contr ol entry (ACE) or all ACEs from a VACL and to delete the VAC Ls from the edit buf f er , use the cle a r se curity a cl com ...

  • Cisco Systems 6500 - page 152

    2-102 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear sec urity acl Usage Guid el i nes Changes you make by enterin g this comm and are saved to NVRA M and hardware only af ter you en ter the commit command. Use the show security acl command to display ...

  • Cisco Systems 6500 - page 153

    2-103 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear security acl captu re-ports clear security acl captu re-ports T o r emove a po rt from the captur e port list, use the clear security acl ca pture - ports comman d. clear secur ity acl captur e ...

  • Cisco Systems 6500 - page 154

    2-104 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear sec urity acl log flow clear security acl log flo w T o clea r all f lows in the security ACL log tabl e, use the clear s ecurity ac l log flow command. clear s ecurity ac l log flow Syntax D escr i ...

  • Cisco Systems 6500 - page 155

    2-105 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear security acl map clear security acl map T o re move VAC L-to-VLA N mapping, use the clear securit y acl map comm and. clear s ecurity ac l map a cl_name vlan clear s ecurity ac l map { acl_n am ...

  • Cisco Systems 6500 - page 156

    2-106 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear sec urity acl m ap This e xample shows how to r emov e all VACL-to-VLAN mappings from a sp ecif ic VLAN: Console> (enable) clear security acl map 5 Map deletion in progress. Successfully cleared ...

  • Cisco Systems 6500 - page 157

    2-107 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear snmp ac cess clear snmp access T o remove the acce ss rights of an SNMP gro up, use the clear sn mp acce ss comma n d. clear s nmp access [ -hex ] { gr oup name } { sec urit y-mo del { v1 | v2 ...

  • Cisco Systems 6500 - page 158

    2-108 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear snm p access -list clear snmp acces s-list T o clear the IP ad dress of a host that is associated with an access list nu mber , use the clear sn mp access-list command. clear sn mp access-lis t acce ...

  • Cisco Systems 6500 - page 159

    2-109 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clea r s nm p co mm unit y clear snmp communit y T o clear an SNMP comm u nity table, use th e clear snmp community comm and . clear snmp community inde x [ -he x ] { in dex_name } Syntax Descript io ...

  • Cisco Systems 6500 - page 160

    2-110 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear snm p commu nity-ex t clear snmp communit y-ex t T o clea r an e xisting commun ity string, use the clear snmp co mmunity-ext command. clear snmp communit y-ext community _s tring Syntax D escr i pt ...

  • Cisco Systems 6500 - page 161

    2-111 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clea r s nm p gr oup clear snmp grou p T o remo ve the SNMP user fr om an SNMP group, use th e clea r snm p group co mmand. clear s nmp group [ -hex ] gr oupn ame { user [ -he x ] userna me } { secur ...

  • Cisco Systems 6500 - page 162

    2-112 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear snm p ifalias clear snmp i falias T o clea r an SN MP interf ace alias, u se the cle ar snmp ifalias co mmand. clear snmp ifalias { ifin dex | all } Syntax D escr i pti on Defaults Thi s command has ...

  • Cisco Systems 6500 - page 163

    2-113 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear snmp notify clear snmp notify T o clear the SNMP notify name in the snmpNotifyT able, use the clear snmp notify comm and. clear s nmp notify [ -h ex ] { notifyname } Syntax Descript ion Default ...

  • Cisco Systems 6500 - page 164

    2-114 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear snm p target add r clear snmp targetadd r T o clear the SNMP tar get address entr y in the T arge tAddressT able, use the clear snmp tar getaddr comm and. clear snmp tar g etaddr [ -he x ] { addrn a ...

  • Cisco Systems 6500 - page 165

    2-115 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear sn mp targetp arams clear snmp targ etparams T o clear the SNMP tar get parameter s used in the snm pT arg etPar amsT able, use the c lear snmp target par am s com mand . clear snmp tar getpara ...

  • Cisco Systems 6500 - page 166

    2-116 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear snm p trap clear snmp t rap T o cl ear an en tr y from th e SNMP trap receiver tabl e, use t he clea r sn mp tra p command. clear sn mp trap { r cvr_ad dr } [ all ] Syntax D escr i pti on Defaults T ...

  • Cisco Systems 6500 - page 167

    2-117 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear sn m p use r clear snmp us er T o remo ve an SN MP user , use the c lear snmp user command. clear sn mp user [ -he x ] { userna me } [ re m ot e engine id ] Syntax Descript ion Defaults If a re ...

  • Cisco Systems 6500 - page 168

    2-118 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear snm p view clear snmp vi ew T o remo ve the MIB vi ew entry fr om the vac mV iewT r eeFa milyT able, us e the clear s nmp view comm and. clear sn mp view [ -he x ] { vie wname subtr e e } Syntax D e ...

  • Cisco Systems 6500 - page 169

    2-119 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear spantree de tected-prot ocols clear spantree detec ted-protoco ls T o det ec t legacy brid ges a nd the b oundar y por ts of the MS T r egion, use the clear spa ntr ee dete cted-pr otoc ols com ...

  • Cisco Systems 6500 - page 170

    2-120 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear spa ntree ms t clear spantree mst T o clear the map ping of VLA Ns to an MST instanc e, use the clear s pantr ee mst comm and. clear s pantr ee mst instance [ vlan vl an s ] Syntax D escr i pti on D ...

  • Cisco Systems 6500 - page 171

    2-121 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clea r sp an tre e por tco s t clear spantree portc ost T o clear the po rt cost of a port on the s witch, use th e clea r spant ree por tcost comm and. clear s pa n tree po rt co st m od/port [ ms t ...

  • Cisco Systems 6500 - page 172

    2-122 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear spa ntree p ort instance cost clear spantree porti nstanceco st T o restore the def ault path cost to an instance on a port, use the clear s pantr ee portinstancecos t comm and. clear s pantree port ...

  • Cisco Systems 6500 - page 173

    2-123 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear span tree portinstan cecost Relat e d Commands set spant ree po rtinstance cost show spantr ee statistics ...

  • Cisco Systems 6500 - page 174

    2-124 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear spa ntree p ort instance pri clear spantree porti nstancepri T o restore the def ault path cost to an instance on a port, use the clear s pantr ee portinstanc epri comm and. clear sp antr ee portins ...

  • Cisco Systems 6500 - page 175

    2-125 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear spantree po rtpri clear spantree portp ri T o clear the port pr iority of a port on the switch, use the clear spant ree portpri co mmand . clear sp antr ee portpri mod/port [ mst ] Syntax Descr ...

  • Cisco Systems 6500 - page 176

    2-126 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear spa ntree p ortvlanc ost clear spantree portv lancost T o restore the def ault path cost to a VLAN on a port, use the clear span tree port vlanc ost command . clear sp a ntr ee po rt vlan co st mod/ ...

  • Cisco Systems 6500 - page 177

    2-127 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear sp an tre e por tvla nco st Usage Guid el i nes This command is valid in PVST+ mode only . If you do not spe cify a VL AN, a ll V LAN s ar e cle are d. Exam ples These e xampl es sho w ho w to ...

  • Cisco Systems 6500 - page 178

    2-128 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear spa ntree p ortvlanp ri clear spantree portv lanpri T o reset the spanning tree port VLAN prior ity , use the clear spant ree portvlanpri comm and. clear s pantr ee portvlanpri mod/port [ vlans ] Sy ...

  • Cisco Systems 6500 - page 179

    2-129 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear spantree r oot clear spantree root T o rest ore th e spann ing tree bridge priori ty, hel lo time , maxa ge, and forw ard de lay on t he swi tch to their default valu es, use the clea r spantr ...

  • Cisco Systems 6500 - page 180

    2-130 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear spa ntree ro ot This e xample sho ws ho w to clear th e spannin g tree root on an instance: Console> (enable) clear spantree root mistp-instance 1 Instance 1 bridge priority set to 32768. Instanc ...

  • Cisco Systems 6500 - page 181

    2-131 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear sp antree stati stics clear spantree statistic s T o clear the s panning tree stat istics, use the clear s pant ree statis tics command. clear s pantr ee statistics mod/port clear s pantr ee st ...

  • Cisco Systems 6500 - page 182

    2-132 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear spa ntree sta tistics This e x ample sho ws how to clear the spanni ng tree stat istics for an ins tance: Console> (enable) clear spantree statistics mistp-instance 2 Statistics cleared for insta ...

  • Cisco Systems 6500 - page 183

    2-133 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear spantree up linkfast clear spantree uplink fast T o turn of f the Uplin kF ast feature and to return th e switc h prior ity and por t costs to the d ef ault setti ngs, use the clea r spantr ee ...

  • Cisco Systems 6500 - page 184

    2-134 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear sy stem i nfo -log com mand clear system info-log command T o r emove a show comma nd fr om the sy stem i nform ation loggi ng index, use th e clear system inf o-log command comm and . clear syst em ...

  • Cisco Systems 6500 - page 185

    2-135 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear ta cacs key clear tacacs key T o remov e the ke y setting used for T A CACS+ auth entication and encryp tion, use the clea r taca cs ke y comm and. clear ta cacs key Syntax Descript ion This c ...

  • Cisco Systems 6500 - page 186

    2-136 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear tac acs se rve r clear tacacs serv er T o remo ve a host fr om the lis t of T A CA CS+ serv ers, use the clea r taca cs server comma nd. clear ta cacs serv er ip_addr Syntax D escr i pti on Defaults ...

  • Cisco Systems 6500 - page 187

    2-137 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear timezone clear timezone T o return the time zo ne to its default, UTC, use the clear ti mezone command . clear time zone Syntax Descript ion This c omm and ha s no a rgume nts o r keywords. Def ...

  • Cisco Systems 6500 - page 188

    2-138 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear top clear top T o sto p the T opN process, use the clear top command. clear to p { all | r e port_nu m } Syntax D escr i pti on Defaults Thi s command has no de fault setti ngs. Comma nd T ypes Swit ...

  • Cisco Systems 6500 - page 189

    2-139 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clea r tr un k clear trunk T o restore a trunk port to its defa u lt trunk type and mode or to clear specif ic VLANs from the allo wed VLAN list for a trunk port , use the clear trunk comman d. clear ...

  • Cisco Systems 6500 - page 190

    2-140 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear vl an clear vlan T o delete an ex isting VLAN from a manage ment domain or to clear VLANs that are secured b y a Fire wall Ser vices Module, use the cl ear vlan comm and. clea r vlan vlans clea r vl ...

  • Cisco Systems 6500 - page 191

    2-141 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s cle ar v lan Relat e d Commands set vlan show vlan ...

  • Cisco Systems 6500 - page 192

    2-142 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear vl an co unters clear vlan counte rs T o retu rn the so ftware- cache d counte rs to 0 for all VLANs, use the clear vl an co unte rs co mman d. clear vl an counters { vlans | all } Syntax D escr i p ...

  • Cisco Systems 6500 - page 193

    2-143 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear vla n mapping clear vlan mapping T o dele te existing IEE E 802.1 Q VLAN-to- ISL VLAN mapping s or reserved-t o-nonre served VL AN mappin g, use the clear vlan mapping command. clear vlan mappi ...

  • Cisco Systems 6500 - page 194

    2-144 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear vm p s rcp clear vmps rcp T o delete the VMPS rcp user n ame from the VMPS serv er table, use the cl ear vmps rcp command . clear vmps r cp username Syntax D escr i pti on Defaults Thi s command has ...

  • Cisco Systems 6500 - page 195

    2-145 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear vmps server clear vmps server T o de lete a VMP S server from th e VMPS s erver table, use the clear vmps ser ver command . clear vmps serv er ip_addr Syntax Descript ion Defaults Thi s command ...

  • Cisco Systems 6500 - page 196

    2-146 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands clear vm p s stat is ti cs clear vmps statistics T o delete exi sting VMPS statistics, use the clear vmps statisti cs command. clear vmps s tatistics Syntax D escr i pti on This comm a nd ha s n o argume ...

  • Cisco Systems 6500 - page 197

    2-147 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear vtp pruneel igible clear vtp pruneeligibl e T o specify which VLANs in the VTP domain are ine ligible f or pruning, use th e clear vt p prunee ligible comm and. clear vtp pruneeligible vlans... ...

  • Cisco Systems 6500 - page 198

    Chapter 2 Ca talyst 6 500 Series Swi tch and ROM M onitor Comm ands clear vtp statistic s 2-149 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 2 clear vtp statistics T o delete VT P statistics, use the clear vtp st atistics comm and. clear vt p statistic s Syntax Descript ion This c omm and ha s no a rgume nts o r keyword ...

  • Cisco Systems 6500 - page 199

    2-150 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s comm it commit T o commit all A CEs or a specifi c A CE in NVRAM that has not been written to hardware, use the commit command . commit qos acl { acl_ name | all | adjacency } commit se curity acl { ...

  • Cisco Systems 6500 - page 200

    2-151 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands commit Relat e d Commands ro llback ...

  • Cisco Systems 6500 - page 201

    2-152 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s commit lda commit lda T o commit ASLB c onfi g uration that ha s not been wri tten to hard ware to NV RAM, use the commit lda comm and. commit lda Syntax Descript ion This c omm and ha s no a rgume n ...

  • Cisco Systems 6500 - page 202

    2-153 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands configu re configure T o download a c onfiguration file from an rcp se rver or the networ k and execute each c omman d in that fi le, use the c onfigur e command. conf igure { host file }[ rcp ] conf igur ...

  • Cisco Systems 6500 - page 203

    2-154 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s configu re Exam ples Th is example shows how to do w n load the syste m5 .cfg configu ratio n file from the 192.122 .17 4. 42 host: Console> (enable) configure 192.122.174.42 system5.cfg Configure ...

  • Cisco Systems 6500 - page 204

    2-155 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands confreg confreg T o conf ig ure the config uration reg ister utility , use the confr eg co mmand. confreg [ num ] Syntax D escr i pti on Defaults Thi s command has no de fault setti ngs. Comma nd T ypes R ...

  • Cisco Systems 6500 - page 205

    2-156 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s confr eg enter to boot: 0 = ROM Monitor 1 = the boot helper image 2-15 = boot system [0]: 0 Configuration Summary enabled are: diagnostic mode console baud: 9600 boot: the ROM Monitor do you wish to ...

  • Cisco Systems 6500 - page 206

    2-157 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands context context T o di splay the con text of a l oade d im age, use the context co mmand. cont ext Syntax D escr i pti on This comm a nd ha s n o argume nts or keyword s. Defaults Thi s command has no de ...

  • Cisco Systems 6500 - page 207

    2-158 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s cont ext a0 : 00000000 00000400 | s4 : 00000000 0000000f a1 : 00000000 60276c58 | s5 : ffffffff ffffffff a2 : 00000000 00000074 | s6 : 00000000 60276c58 a3 : 00000000 00000000 | s7 : 00000000 0000000 ...

  • Cisco Systems 6500 - page 208

    2-159 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands copy copy T o uploa d or download a Flash i ma ge or a swi t ch configur at ion to or fro m a Fla s h device, rcp server , or TFTP se rver, use t he copy comm and. copy fi le - i d { tftp | rc p | flas h ...

  • Cisco Systems 6500 - page 209

    2-160 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s copy Comma nd T ypes Swit ch co mman d. Command Mode s Pri vile ged. Usage Guid el i nes Use the copy comm and t o perf or m these ta sks: • Do wnload a sy stem i mage or configur ation f ile from ...

  • Cisco Systems 6500 - page 210

    2-161 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands copy Exam ples Th is exampl e sh ows how to use t he copy command to upload t he switch c o nf iguration to a f ile named cat.cfg o n the sl ot0 Fl ash device: Console> (enable) copy config slot0:cat.c ...

  • Cisco Systems 6500 - page 211

    2-162 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s copy Console> (enable) copy tftp config IP address or name of remote host? 172.20.22.7 Name of configuration file? cat.cfg Configure using cat.cfg from 172.20.22.7 (y/n) [n]? y / Finished network ...

  • Cisco Systems 6500 - page 212

    2-163 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands copy This example shows ho w to configure a Catal yst 6500 serie s switch us ing a configurat ion file downloaded fr om an rcp server : Console> (enable) copy rcp config IP address or name of remote ho ...

  • Cisco Systems 6500 - page 213

    2-164 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s copy Relat e d Commands clear ft p conf igure set boot config-r egister set boot co nfig-register aut o-config set ftp show ftp write ...

  • Cisco Systems 6500 - page 214

    2-165 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands dele te delete T o delete a conf iguration f ile, use the del ete comm and. delete [[ m/ ] device : ] file n a me Syntax D escr i pti on Defaults Thi s command has no de fault setti ngs. Comma nd T ypes S ...

  • Cisco Systems 6500 - page 215

    2-166 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s dev dev T o list the de vice IDs av ailable on a switch, use the de v command. dev Syntax Descript ion This c omm and ha s no a rgume nts o r keywords. Defaults Thi s command has no de fault setti ng ...

  • Cisco Systems 6500 - page 216

    2-167 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands dir—ROM monit or dir—ROM monitor T o list the files of the name d device, use the dir comman d. dir de vice Syntax D escr i pti on Defaults Thi s command has no de fault setti ngs. Comma nd T ypes R O ...

  • Cisco Systems 6500 - page 217

    2-168 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s dir—switch dir—switch T o display a list of f iles on a Flash memory dev ice, use the dir command. dir [[ m/ ] device : ][ f ilename ] [ all | deleted | lo ng ] Syntax Descript ion Defaults Thi s ...

  • Cisco Systems 6500 - page 218

    2-169 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands dir—swit c h Exam ples This example sho ws how to display the file infor m ation in short format: Console> (enable) dir -#- -length- -----date/time------ name 1 6061822 Mar 03 2000 15:42:49 cat6000-s ...

  • Cisco Systems 6500 - page 219

    2-170 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s disa ble disable T o re turn t o n orma l mo de f rom p rivileged mo de , use the disable comman d. disable Syntax Descript ion This c omm and ha s no a rgume nts o r keywords. Defaults Thi s command ...

  • Cisco Systems 6500 - page 220

    Chapter 2 Ca talyst 6 500 Series Swi tch and ROM M onitor Comm ands discon nect 2-171 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 22 disconn ect T o clos e an ac tive console p ort or T elnet s ession , use the disconnect command . disconnect { ip_addr | console } Syntax Descript ion Defaults Thi s command has no de fa ...

  • Cisco Systems 6500 - page 221

    2-172 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s download down load T o copy a software image from a specified host to the Flash me mory of a designate d module , use the download command. download host f ile [ mod ] [ rc p ] download serial downlo ...

  • Cisco Systems 6500 - page 222

    2-173 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands downlo ad The download seri al comm and uses Kermit through th e serial EI A/TIA -232 conso le port. The download serial co mman d is not allowed from a T elne t session. Befo re you can e xec ute the dow ...

  • Cisco Systems 6500 - page 223

    2-174 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s download This sam ple sessio n shows how to connect to a re mo te termi nal fr om a Su n workstatio n and h ow to use the do wnload s erial command to copy a softwa re imag e to the supe rvis or engi ...

  • Cisco Systems 6500 - page 224

    2-175 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands downlo ad This example shows ho w to upgr ade the EPLD ima ge in force mod e on the modu le in slot 5: Console> (enable) download epld aq_cr128_art.bin 5 force CCCCCC Device found requiring upgrade in ...

  • Cisco Systems 6500 - page 225

    2-176 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s enable enable T o ac t iv ate pr ivileged mo de, u se the enable co mma nd. I n p rivileged mo de , ad ditio na l c omm ands ar e av ailable, and cer tain comm ands disp lay additi onal infor mation. ...

  • Cisco Systems 6500 - page 226

    Chapter 2 Ca talyst 6 500 Series Swi tch and ROM M onitor Comm ands format 2-177 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 22 format T o fo rmat boo tflas h or a Fl ash PC ca rd (a Flash d evice must be fo rmat ted be fore it ca n be u sed), u se the fo r m a t command. fo r m a t [ spare spare-num ] [ m/ ] device1 : ...

  • Cisco Systems 6500 - page 227

    2-178 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s for ma t Y ou can al so specify device1 : monlib-f ilename as the device and filename to be us ed, as fo llows: format device1: [ device 1 : [ monlib-fil ename ]] If monlib-f ilename is omitt ed, the ...

  • Cisco Systems 6500 - page 228

    2-179 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands frame frame T o displ ay an individual stac k fram e, use the fr ame command. frame [ -d | -p ] [ num ] Syntax D escr i pti on Defaults The de fault is a boot ed image kernel con text, which is the younge ...

  • Cisco Systems 6500 - page 229

    2-180 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s fsc k fsck T o check a Fl ash fi le syste m for damage and to repair an y problems, us e the fsc k co mman d. fsck [ m / ] devi ce : [ auto matic ] Syntax Descript ion Defaults Thi s command has no d ...

  • Cisco Systems 6500 - page 230

    2-181 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands fsck Ente r th e dir command ag ain to see that the co rrupte d file is corrected: Console> (enable) dir disk0: 3 -rw- 556 Mar 06 2049 16:26:16 t1 4 -rw- 556 Mar 06 2049 16:26:16 t2 5 -rw- 556 Mar 06 2 ...

  • Cisco Systems 6500 - page 231

    2-182 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s history—RO M monitor history—ROM monitor T o displ ay the co mman d history (t he last 16 co mman ds executed in the ROM monitor e n vironment ), use the history co mmand. This command is aliased ...

  • Cisco Systems 6500 - page 232

    2-183 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands histor y—sw itc h history—switch T o s how th e co nt en ts of t he co mma nd h isto ry buffer , use th e history command. history Syntax D escr i pti on This comm a nd ha s n o argume nts or keyword ...

  • Cisco Systems 6500 - page 233

    2-184 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s l2trace l2trace T o displa y the Layer 2 pa th taken b y the packet s that start at a specif ied source addr ess and en d at a specif ied destination address, use the l2trace comm and. l2trace sr c_m ...

  • Cisco Systems 6500 - page 234

    2-185 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands l2tra ce The Lay er 2 trace feature is not supported when multiple de vices are atta ched to one port through hubs (for exa mple, multiple CDP neighbors detected on a port). When more than one CDP n eighb ...

  • Cisco Systems 6500 - page 235

    2-186 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s l2trace This examp le shows how to display a su mmary of Laye r 2 packet pa th info rmation f or a speci fied source and destin ation MAC address: Console> (enable) l2trace 00-01-22-33-44-55 10-22 ...

  • Cisco Systems 6500 - page 236

    2-187 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands meminfo meminfo T o display informat io n about the main memory , p acket memory , and NVRAM, use the me min fo command. W ith the -l option, t he s uppo rte d D RAM c onfigura tions ar e displ aye d. mem ...

  • Cisco Systems 6500 - page 237

    2-188 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s ping ping T o s end ICM P e ch o-r eque st pa c kets to an othe r nod e on t he n etwor k, use the ping command. Y ou can also us e th e ping com mand w it hout argument s to c onfigure pi ng. ping - ...

  • Cisco Systems 6500 - page 238

    2-189 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands ping The guide lines for th e ping -s command are as follows: • The maximum w aiting time befor e timing out is 2 seconds. • A new ping packet is gener ated after 1 second of sending the previous pack ...

  • Cisco Systems 6500 - page 239

    2-190 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s ping 64 bytes from elvis: icmp_seq=4. time=11 ms 64 bytes from elvis: icmp_seq=5. time=7 ms 64 bytes from elvis: icmp_seq=6. time=7 ms ^C ----elvis PING Statistics---- 7 packets transmitted, 7 packet ...

  • Cisco Systems 6500 - page 240

    Chapter 2 Ca talyst 6 500 Series Swi tch and ROM M onitor Comm ands pwd 2-191 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 22 pwd T o show the cu rrent set ting of the cd command , use the pwd comm and. pwd [[ m/ ] devic e : ] Syntax Descript ion Defaults If no m odule num be r o r device i s spec ified, pwd defaul ts t ...

  • Cisco Systems 6500 - page 241

    2-192 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s quit quit T o exit a CLI session, use the quit comm and. quit Syntax Descript ion This c omm and ha s no a rgume nts o r keywords. Defaults Thi s command has no de fault setti ngs. Comma nd T ypes Sw ...

  • Cisco Systems 6500 - page 242

    2-193 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands reconfirm vmp s reconfirm vmps T o reconf irm the curr ent dynamic port VLA N membership assig nments with the VMPS serv er , use the reconf irm vmps comm and. reconf irm vmps Syntax D escr i pti on This ...

  • Cisco Systems 6500 - page 243

    2-194 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s reloa d reload T o for ce a modu le to acce pt a download throug h SCP , use the reload comman d. Thi s comma nd resets the module and prompt s you to initia te a download when th e reset is com plet ...

  • Cisco Systems 6500 - page 244

    2-195 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands repeat repeat T o repeat a com mand, use the repe a t command . rep e a t [ num | string ] Syntax D escr i pti on Defaults If no argu ment is specifie d, the last command is repeated. Comma nd T ypes R OM ...

  • Cisco Systems 6500 - page 245

    2-196 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s repeat rommon 23 > repeat dir dir bootflash: File size Checksum File name 1973032 bytes (0x1e1b28) 0xdadf5e24 llue rommon 24 > repeat dir bootflash: File size Checksum File name 1973032 bytes ( ...

  • Cisco Systems 6500 - page 246

    2-197 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands reset— ROM moni tor reset—ROM monitor T o perf orm a soft re set of t he swi tch, use the re se t R OM m onit or c om mand. res e t [- s ] Syntax D escr i pti on Defaults The default Flash device is s ...

  • Cisco Systems 6500 - page 247

    2-198 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s reset—switch reset—switch T o restart the system or an ind ividual module, schedule a system reset, or cancel a sche duled rese t, use the res et command. res e t [ mo d | system | mindown ] res ...

  • Cisco Systems 6500 - page 248

    2-199 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands reset—s witch Y ou can use the rese t min down command to rese t the switch as p art of a mi nimal d ow ntime soft ware upgrade in a system with a redundant supervi sor engine . For complet e inform ati ...

  • Cisco Systems 6500 - page 249

    2-200 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s reset—switch This e xample sho ws how to schedule a reset with minim um do wntime for a specif ic future t ime and includ e a reaso n for the reset: Console> (enable) reset mindown at 23:00 3/15 ...

  • Cisco Systems 6500 - page 250

    2-201 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands reset—s witch ...

  • Cisco Systems 6500 - page 251

    Chapter 2 Ca talyst 6 500 Series Swi tch and ROM M onitor Comm ands rest or e coun t ers 2-202 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 2F2 restore counters T o rest ore MA C and port co unters, use the re stor e counters command. restore cou nters [ al l | mod/port s ] Syntax Descript ion Defaults Thi s command has ...

  • Cisco Systems 6500 - page 252

    2-203 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands rollbac k rollback T o clear chan ges made to the A CL edit b u ffe r since its last sa ve, use th e rollback co mmand. The A CL is rolled back to its state at the last commit command. rollba ck qos acl { ...

  • Cisco Systems 6500 - page 253

    2-204 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s session session T o open a se ssion with a modu le (for exam ple, the MSM, N AM, or A TM), use the session comm and. This comm and all ows you to use the modul e-speci fic CLI. session mod Syntax Des ...

  • Cisco Systems 6500 - page 254

    2-205 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set set T o display all of the R OM monitor va r iable names with their value s, use the set comm and. set Syntax D escr i pti on This comm a nd ha s n o argume nts or keyword s. Defaults Thi s command ha ...

  • Cisco Systems 6500 - page 255

    2-206 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set accou nti ng co mm an d s set accountin g commands T o en able comm and ev ent acco unting on t he switch, use the set acc ounting commands command. set accounting commands enable { con fig | ena ...

  • Cisco Systems 6500 - page 256

    2-207 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set acco unt ing con nec t set accountin g connect T o ena ble a cco unti ng of o ut bound co nne ctio n events on th e switc h, use the set accounting co nnect comm and. set accounting connect enable { s ...

  • Cisco Systems 6500 - page 257

    2-208 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set accou nting ex ec set accountin g exec T o enabl e account ing of norm al logi n sessions on th e switch, use the se t acco untin g exec comman d. set ac countin g exec enable { start-sto p | sto ...

  • Cisco Systems 6500 - page 258

    2-209 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set acco unt ing exe c Relat e d Commands set accounting commands set accounting connect set accounting suppress set accounting syste m set accounting update set radius key set r adi us s erver set ta cac ...

  • Cisco Systems 6500 - page 259

    2-210 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set account ing suppress set accountin g suppress T o ena ble o r di sab le supp ressi on of a ccou nt ing infor mat ion for a u ser w ho has logg ed in wit ho ut a user name , use the set accounting ...

  • Cisco Systems 6500 - page 260

    2-211 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set acco untin g sy stem set accountin g system T o enable acc ounting of system e ve n ts on the switch, use th e set acco unti ng syst em command. set accounting syste m enable { sta rt-stop | st op-onl ...

  • Cisco Systems 6500 - page 261

    2-212 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set accounti ng system Relat e d Commands set accounting commands set accounting connect set ac countin g exec set accounting suppress set accounting update set radius key set r adi us s erver set ta ...

  • Cisco Systems 6500 - page 262

    2-213 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set acco unt ing upd ate set accountin g update T o con figure the fr equen cy of account ing updat es, use the set accounting updat e command. set accounting update { new-inf o | { periodic [ int erv al ...

  • Cisco Systems 6500 - page 263

    2-214 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set acllog ratelimit set acllog ratelimit T o lim it the nu mbe r of pa ckets se nt to the r oute p roc essor CPU for bri dged ACEs, use the set ac llog rate limit command . set acllog ratelimit ra t ...

  • Cisco Systems 6500 - page 264

    2-215 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set al ias set alias T o d efine ali ases (sho rtha nd version s) of co mm an ds, use the se t al ias command. set alias name comma nd [ pa rameter ] [ para meter ] Syntax D escr i pti on Defaults The def ...

  • Cisco Systems 6500 - page 265

    2-216 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set ar p set arp T o add IP ad dress- to-MA C address mapping entries to the ARP tabl e and to set the ARP agin g time for the table , use the set arp command . set arp [ dynamic | permanent | static ...

  • Cisco Systems 6500 - page 266

    2-217 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set ar p This e xample sho ws how to conf igure a permanent ARP entr y , which will remain in the ARP cache after a system reset: Console> (enable) set arp permanent 198.146.232.23 00-00-0c-30-0f-bc Pe ...

  • Cisco Systems 6500 - page 267

    2-218 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set authentication enable set authentica tion enabl e T o enable authen tication using the T A CACS+ , RADIUS, or K e rberos serve r to determine if you ha ve pri vileged access permis sion, us e the ...

  • Cisco Systems 6500 - page 268

    2-219 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set authent ication enable Usage Guid el i nes Use authen ticati on conf igur ation for both console and T elnet co nnectio n attempts u nless you use the consol e or teln et keywords to sp ecify the a ut ...

  • Cisco Systems 6500 - page 269

    2-220 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set auth entication lo gin set authentica tion login T o enable T A CA C S+, RADIUS, or K erberos as the authenti cation met hod for login , use the set authen tic atio n l og in command. set au then ...

  • Cisco Systems 6500 - page 270

    2-221 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set a uth e n t ic a t ion lo g in Usage Guid el i nes This comm and all ows you to choose th e authen tica tion meth od for the we b interfac e. If you configu re the auth entication meth od for the HTTP ...

  • Cisco Systems 6500 - page 271

    2-222 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set au tho riz at io n comm an d s set authorizatio n commands T o enable auth orization of comman d e vents on the switc h, use the set author ization comm ands comm and. set auth ori zation co mma ...

  • Cisco Systems 6500 - page 272

    2-223 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set authori zation com m a nds Exam ples This exampl e shows ho w to enable author ization for a ll commands with th e if-authentic ated option and none fallback option : Console> (enable) set authoriz ...

  • Cisco Systems 6500 - page 273

    2-224 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set authori zation ena ble set authorizatio n enable T o enable auth orization of pri vileged mode sessions on the switch, use the set authori zation en able comm and. set auth ori zation ena bl e en ...

  • Cisco Systems 6500 - page 274

    2-225 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set a uth o r i zat ion e n a b le Exam ples Th is exam ple shows how to en able authori zation of c onfiguratio n comma nds i n enabl e, privileged l ogin mode, sessions: Console> (enable) set authori ...

  • Cisco Systems 6500 - page 275

    2-226 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set authorization exec set authorizatio n exec T o enable auth orization of ex ec, normal login mode, sessio n ev ents on the switch, use the set authorization e xec command. set auth ori zation ex e ...

  • Cisco Systems 6500 - page 276

    2-227 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set authori zation exec Exam ples This example sho ws how to enable au thorization o f config uration comman ds in ex ec, normal login mode, sessions: Console> (enable) set authorization exec enable if ...

  • Cisco Systems 6500 - page 277

    2-228 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set ba nne r lc d set banner lc d T o con figure t he Ca talyst 650 0 se rie s Swi tc h Fabric Mod ul e L CD use r bann er, use the set banner lcd comm and. set banner lcd c [ tex t ] c Syntax Descri ...

  • Cisco Systems 6500 - page 278

    2-229 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set bann er m ot d set banner motd T o prog ram a n MO TD banner to appear before se ssion l ogin, u se the set banner motd comman d. set banner motd c [ text ] c Syntax D escr i pti on Defaults Thi s com ...

  • Cisco Systems 6500 - page 279

    2-230 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set ba nner tel net set banner te lnet T o di splay or s uppr ess t he “ Cisc o System s C onsole” T elnet ba nner me ssage , use the s et banner telnet comm and. set banner telnet { enable | dis ...

  • Cisco Systems 6500 - page 280

    2-231 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set boot aut o-conf ig set boot auto-con fig T o specif y one or mor e configur ation files t o use to config ure the switch at boo tup, use the set boot auto-c onfig comm and. Th e li st o f c on figu ra ...

  • Cisco Systems 6500 - page 281

    2-232 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set boo t config -regist er set boot config -register T o con fi gu re t he b oot co nfi gu rat ion regi ster va lue , use th e s et bo ot co n fig-regis te r co mman d. set boot conf ig-register 0x ...

  • Cisco Systems 6500 - page 282

    2-233 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set boot conf ig-regis t er The baud rate speci fied in the conf iguration re gister is use d by the R OM monitor o nly and is dif ferent from the baud rate spe cif ied by the set system baud command. Whe ...

  • Cisco Systems 6500 - page 283

    2-234 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set boo t config -regist er Relat e d Commands copy set boot auto-c onfig set boot system flas h set conf ig acl n vram show boot show conf ig ...

  • Cisco Systems 6500 - page 284

    2-235 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set boot conf ig-regis t er auto-c onf ig set boot config -register au to-config T o configure auto -config file dispensa tion, use the set boot conf ig-reg ister auto -confi g comm and . set boot co nfig ...

  • Cisco Systems 6500 - page 285

    2-236 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set boot config-register auto-config If you use the set boot auto-con f ig bootflash: switch.cf g with the overwri te option, you m ust use th e copy conf ig bootflash:switch.cfg command to sa ve the ...

  • Cisco Systems 6500 - page 286

    2-237 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set boot conf ig-regis t er auto-c onf ig This e xample sho ws how to enable synchronizatio n of the auto-conf ig file: Console> (enable) set boot config - register auto - config sync enable Configurat ...

  • Cisco Systems 6500 - page 287

    2-238 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set boot device set boot device T o set the Network Analysis Module (NAM) or Int rusion Detection System (I DS) boot environment, use the set boot device command . set boot device bootseq [ , boots e ...

  • Cisco Systems 6500 - page 288

    2-239 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set boot dev ice This example shows ho w to spe cify mult iple boo t en vi ronment s on module 5: Console> (enable) set boot device hdd,hdd:5,pcmcia:slot0,network,hdd:6 5 Device BOOT variable = hdd,hdd ...

  • Cisco Systems 6500 - page 289

    2-240 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set boot sync no w set boot sync now T o immed iately initiate synchroni zation of the system image be tween the ac ti ve and red undant supervi sor engine, use the set bo ot sync now command. set bo ...

  • Cisco Systems 6500 - page 290

    2-241 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set boot system f lash set boot system fla sh T o set the BOOT envi ronment v ariab le tha t specif ies a li st of ima ges th e switc h load s at sta rtup, u se th e set boot system flas h com mand. set b ...

  • Cisco Systems 6500 - page 291

    2-242 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set bo ot system flash Relat e d Commands clear boo t system show boot ...

  • Cisco Systems 6500 - page 292

    2-243 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set ca m set cam T o add entries int o the CAM table, set the agin g time for the CAM table, and c on fi gu re tr af f ic f ilt er in g from and to a specifi c host, us e t he set cam co mmand . set cam { ...

  • Cisco Systems 6500 - page 293

    2-244 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set ca m Usage Guid el i nes If the gi ven MA C address is a multicast address (the least signif icant bit of the most significant byte is set to 1) or broadcast a ddress (f f-f f-f f-f f-f f-f f) an ...

  • Cisco Systems 6500 - page 294

    2-245 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set cam not if i cation set cam notification T o enable n otif ication w hen a MA C addr ess change occurs to the CAM table an d to set the tim e between notif ications, use the set cam notificati on comm ...

  • Cisco Systems 6500 - page 295

    2-246 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set cam notification Command Mode s Pri vile ged. Usage Guid el i nes Y ou can gl obally disab le notificatio ns using the set cam notificat ion disable co mman d, but the othe r notif ication c onfi ...

  • Cisco Systems 6500 - page 296

    2-247 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set cam not if i cation Relat e d Commands clear ca m clear ca m notif icatio n set cam set snmp tr ap show cam show ca m notificati on ...

  • Cisco Systems 6500 - page 297

    2-248 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set cd p set cdp T o ena ble , disa ble, o r co nfigure Ci sco D isc overy Protoc ol (CD P) fea ture s g lob ally on al l po rts o r on specif ied p orts, use the set cdp co mman d. set cdp { enable ...

  • Cisco Systems 6500 - page 298

    2-249 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set cd p Usage Guid el i nes The set cdp v ersion command allo ws you to global ly set the hi ghes t version n umber of CDP p ackets t o send. If you ente r the glo bal set cdp enable or disable comman d, ...

  • Cisco Systems 6500 - page 299

    2-250 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set channelprotocol set channelp rotocol T o set th e protoc ol that man ages chan nelin g on a module , use the se t channe lprotocol comman d. set channelpr otocol { pagp | lacp } mod Syntax Descri ...

  • Cisco Systems 6500 - page 300

    2-251 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set chan nel protoc ol Relat e d Commands clear la cp-channel stati stics set lacp-channel sy stem-pr iority set port lacp-channel set spant ree cha nnelcost set spant ree cha nnelvlancos t show channelpr ...

  • Cisco Systems 6500 - page 301

    2-252 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set c hannel vlancost set channel vla ncost T o s et th e chan nel V LAN co st, use th e set channel vlancost comm and. set channel vlan cost c hannel_id cos t Syntax Descript ion Defaults The def au ...

  • Cisco Systems 6500 - page 302

    2-253 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set chan nel vlanc ost After you enter this comm and, you must reenter the set s pantr ee portvlan cost comman d so th at the desired VLAN or VL ANs are associated with all the cha nnel ports. This exam p ...

  • Cisco Systems 6500 - page 303

    2-254 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set config acl nvram set config acl n vram T o copy the curren t commi tted A CL co nfiguration fr om DRA M back int o NVRA M, us e the set config acl n vram com ma nd . set config acl nv r a m Synta ...

  • Cisco Systems 6500 - page 304

    2-255 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set config mode set config mod e T o chang e the configu ration mode from a bi nary mode l to a text model or t o auto matica lly save the system co nfiguration in text mode in NVRAM , use the set conf ig ...

  • Cisco Systems 6500 - page 305

    2-256 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set confi g m ode Exam ples Th is exampl e sh ows how to set the co nfigurati on mode to bi nary : Console> (enable) set config mode binary System configuration copied to NVRAM. Configuration mode ...

  • Cisco Systems 6500 - page 306

    2-257 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set cops set cops T o conf igure COPS funct ionality , use the set cops comm and. set cops se rver ipaddress [ port ] [ primary ] [ diff-serv | rsvp ] set cops domain-name d omain_nam e set cops retry-int ...

  • Cisco Systems 6500 - page 307

    2-258 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set cops When s pecify ing the retry- inte rval , the total of the initial timeout value an d the incremen tal value (increme nt on eac h subsequen t failure ) may not ex ceed th e maximu m timeou t ...

  • Cisco Systems 6500 - page 308

    2-259 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set cryp to ke y r sa set crypto key rsa T o gen erate a nd c onfigure an RSA key pa ir, use the set c rypto key rsa command. set cry pto key r sa nbits [ fo rc e ] Syntax D escr i pti on Defaults The co ...

  • Cisco Systems 6500 - page 309

    Chapter 2 Ca talyst 6 500 Series Swi tch and ROM M onitor Comm ands set def ault portstatu s 2-260 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 222 set default portstatus T o set t he def ault port sta tus, use the set default portstatus com m and. set default portstatus { enable | disable } Syntax Descript ion Defaults ...

  • Cisco Systems 6500 - page 310

    2-261 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set dot1q- all-tagg ed set dot1q-all-tagged T o chang e all existing and new dot1q trunk s to the dot1q- only mode , use the set dot1q-all-tagged comm and. set dot1q- all-t agged { enable | disable } Synt ...

  • Cisco Systems 6500 - page 311

    2-262 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set dot1x set dot1x T o conf igure dot1 x on a syste m, use the set do t1x comman d. set dot1x sy stem-auth-contr ol { enable | disable } set dot1x { quiet-period | tx-peri od | re-aut hperiod } seco ...

  • Cisco Systems 6500 - page 312

    2-263 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set d ot1x • max-req count is 2 • shutdown-timeout is 300 seconds Comma nd T ypes Swit ch co mman d. Command Mode s Pri vile ged. Usage Guid el i nes When you set the system-auth- control , the follo ...

  • Cisco Systems 6500 - page 313

    2-264 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set dot1x This e xample sho ws you h o w to sp ecify t h e reauthen tication time: Console> (enable) set dot1x re-authperiod 7200 dot1x re-authperiod set to 7200 seconds Console> (enable) Th is ...

  • Cisco Systems 6500 - page 314

    2-265 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set e nab lep a s s set enablepa ss T o change the passw ord for the pri vileged le vel of the CLI, use the set enablepass comm and. set enablepass Syntax D escr i pti on This comm a nd ha s n o argume nt ...

  • Cisco Systems 6500 - page 315

    2-266 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set er rdisabl e-time out set errdisable-timeout T o conf igure a ti meout to au tomatically reenable p orts that are in the er rdisable state, u se the set errdisable -timeout comm and. set errdis a ...

  • Cisco Systems 6500 - page 316

    2-267 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set errdisa ble-time out Y o u can enable or disable e rrdisable t imeout fo r each of the reason s that are lis ted. If you specif y "other ," all ports e rrdis abled by causes other than the r ...

  • Cisco Systems 6500 - page 317

    2-268 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set er rordetect ion set errordetection T o enabl e or disab le various erro r detect ions, use the set err ordetection co mmand. set err ordetection inband enable | disable set err ordetection memor ...

  • Cisco Systems 6500 - page 318

    2-269 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set errord et ection Relat e d Commands sho w err ordetection ...

  • Cisco Systems 6500 - page 319

    2-270 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set fan-tray-version set fan-tray-version T o set t he ve rsion for the fan tr ay in th e chassis, u se the set fan-tray-versi on command. set fan-t ray- version {1 | 2} Syntax Descript ion Defaults ...

  • Cisco Systems 6500 - page 320

    2-271 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set feature agg-link- partne r set feature ag g-link-partner T o enable or dis able the aggress iv e lin k partn er featu re, use the set fe ature agg-link-partner command. set featur e agg-link-partner { ...

  • Cisco Systems 6500 - page 321

    2-272 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set fea ture dot1x- radius-ke epalive set feature do t1x-radius-keep alive T o ena ble o r disab le th e 802.1 X RADIU S keep alive state, use the set feature dot1x-radius-k eepalive comm and. set fe ...

  • Cisco Systems 6500 - page 322

    2-273 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set feature mdg set feature mdg T o enable or disable the multiple defau lt gate way feature, use the set feature mdg command. set fe atur e mdg { enable | disable } Syntax D escr i pti on Defaults Thi s ...

  • Cisco Systems 6500 - page 323

    2-274 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set firewall set firewall T o conf ig ure the parameters for a Firewa ll Services Module (FWSM), use the set firewall command. set f ire wall multiple-vlan-inte rfaces { enable | di sable } Syntax De ...

  • Cisco Systems 6500 - page 324

    2-275 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set ft p set ftp T o con figure Fi le Transfer Pr otoc ol ( FTP) para m eters, us e the set ftp comm and. set ftp u sername ne w_ft p_usern ame set ftp password new_ftp_pa sswor d set ftp passive Syntax D ...

  • Cisco Systems 6500 - page 325

    2-276 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set ftp Relat e d Commands clear ft p show ftp ...

  • Cisco Systems 6500 - page 326

    2-277 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set garp timer set garp timer T o adjust the v alues of the join, leav e, and leav eall timers, u se the set garp timer com mand . set garp timer { timer_type } { time r_v al ue } Syntax D escr i pti on D ...

  • Cisco Systems 6500 - page 327

    2-278 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set gmrp set gmrp T o enable or d isable GARP Multica s t Reg istration Protoco l (GMRP) on the swit ch in all VLANs on all ports, use the set gm rp comman d. set gmrp { en ab le | disa ble } Syntax ...

  • Cisco Systems 6500 - page 328

    2-279 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set gmrp f wdall set gmrp fwdall T o enab le or di sable the Forward All feature on a speci fied port or mo dule an d port lis t, use t he set gmrp fwdall comman d. set gm rp fw da ll { enable | disable } ...

  • Cisco Systems 6500 - page 329

    2-280 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set g mrp regi strat ion set gmrp registration T o spec ify the GMRP regi strat ion type, use the set gmrp registra tion co mmand. set gmrp registra tion { no rmal | fix e d | forbidden } mod/p ort.. ...

  • Cisco Systems 6500 - page 330

    2-281 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set gmrp timer set gmrp timer T o adjust the v alues of the join, leav e, and leav eall timers, u se the set gmrp timer comman d. set gm rp ti me r { timer_type } { tim er_value } Syntax D escr i pti on D ...

  • Cisco Systems 6500 - page 331

    2-282 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set gmrp timer This e xam pl e sho ws how to set t he lea veall ti mer v alue to 20000 millisec o nds for all t he port s on al l the VLANs: Console> (enable) set gmrp timer leaveall 20000 GARP Le ...

  • Cisco Systems 6500 - page 332

    2-283 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set gv rp set gvrp T o enab le or disa ble GARP V LAN Registrati on Protocol (GVRP) globally in the switch or on a pe r-port basis, use the set g vrp command. set gvrp { enable | disable } [ mod/port ] Sy ...

  • Cisco Systems 6500 - page 333

    2-284 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set gvrp ap plicant set gvrp appli cant T o s pecify whether or not a VLAN is de clared out of blocking ports, use the set gv rp appl icant comm and. set gvrp applica nt { normal | active } { mod /po ...

  • Cisco Systems 6500 - page 334

    2-285 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set gvrp dynamic- vlan-c reati on set gvrp dynamic-vlan-creatio n T o enab le or disable dynamic VLAN creation, u se the set gvrp dynamic-vl an-creation command. set gvrp dy namic- vlan- creation { enable ...

  • Cisco Systems 6500 - page 335

    2-286 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set gvr p regist ration set gvrp reg istra tion T o s et the ad mini stra tive contro l of a n outbo und po rt a nd appl y t o all VL ANs on the tr unk , use t he set gvr p re gistra tion command. GV ...

  • Cisco Systems 6500 - page 336

    2-287 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set gvrp r egi stratio n This e xample shows ho w to set the administrative cont rol to for bidden on m odu le 5, por t 2 : Console> (enable) set gvrp registration forbidden 5/2 Registrar Ad mini strat ...

  • Cisco Systems 6500 - page 337

    2-288 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set gvrp timer set gvrp timer To adju st the v alues of th e join, le av e, and lea veall t imers, use the set gvrp time r command. set gvrp timer { timer_type } { timer_ value } Syntax Descript ion ...

  • Cisco Systems 6500 - page 338

    2-289 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set gvr p timer This e xam pl e sho ws how to set t he lea veall ti mer v alue to 20000 millisec o nds for all t he port s on al l the VLANs: Console> (enable) set gvrp timer leaveall 20000 GVRP/GARP L ...

  • Cisco Systems 6500 - page 339

    2-290 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set igmp set igmp T o ena ble o r di sab le Inte rn et Group M anag eme nt Pr otoc ol ( IG MP) s noop ing on the swi tch , use the set ig mp command. set igmp { en ab le | disable } Syntax Descript i ...

  • Cisco Systems 6500 - page 340

    2-291 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set ig mp fastbl ock set igmp fastblock T o enable or d isable the IGMP v ersion 3 fast-bloc k mechanism on the switch, use th e set i gmp fastb lock comm and. set ig mp fa stbl ock { enable | disable } S ...

  • Cisco Systems 6500 - page 341

    2-292 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set igmp fastleave set igmp fastleave T o ena ble o r di sab le Inte rn et Group M anag em ent Prot ocol (IG MP) fa stle ave processin g, use the set i gmp fa stleave comman d. set ig mp fa stle ave ...

  • Cisco Systems 6500 - page 342

    2-293 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set igmp flo odi ng set igmp flooding T o acti vate o r to p r e vent flooding of mul ticast traf fic after th e last host leave s a mult icast grou p, enter the set igmp f loodin g co mman d. set ig mp f ...

  • Cisco Systems 6500 - page 343

    2-294 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set igmp leav e-query-type set igmp leave-que ry-type T o s et the t ype o f que ry to be se nt wh en a po rt r ece ives a leave messag e, u se the se t igmp lea ve-query-type comman d. set igmp lea ...

  • Cisco Systems 6500 - page 344

    2-295 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set igmp mode set igmp mode T o s et the IG MP snoopi n g m ode, use th e set igmp mode co mmand . set igmp mode { igmp-only | igmp-cgmp | aut o } Syntax D escr i pti on Defaults The default is IGMP mode ...

  • Cisco Systems 6500 - page 345

    2-296 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set igmp querier set igmp querier T o conf igure the IGMP q uerier fo r a specif ic VLAN, use the set igmp querier command . set igmp querier { enable | disable } vlan set igmp querier vl an { qi | o ...

  • Cisco Systems 6500 - page 346

    2-297 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set ig mp querier This exampl e shows ho w t o set the quer ier inter val to 130 seconds for VL AN 4001: Console> (enable) set igmp querier 4001 qi 130 QI for VLAN 4001 set to 130 second(s) Console> ...

  • Cisco Systems 6500 - page 347

    2-298 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set igmp ratelimit set igmp ratelimit T o enable o r disable IGMP rate limiting or to se t the rate limit for I GMP snooping pack ets, use the set igmp ratelimit comman d. set igmp ratelimit { enable ...

  • Cisco Systems 6500 - page 348

    2-299 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set i gmp rate lim it is 100. W e recomme nd that yo u increase the PIMv 2 hello r atelimit to 3000 b y entering se t igmp ratelimit pimv2 3000 . Y ou can also increase the IGMP g eneral q ueries rate li ...

  • Cisco Systems 6500 - page 349

    2-300 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set igmp v3- processing set igmp v3-processing T o exp licitly e nabl e or disa ble I GMP version 3 snoo ping, u se the set igmp v3-processing comm and. set igmp v3 -processing { enable | disable } S ...

  • Cisco Systems 6500 - page 350

    2-301 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set igmp v3-pro ces sing Relat e d Commands set ig mp fa stbl ock show multicast v3-group ...

  • Cisco Systems 6500 - page 351

    2-302 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set inlinepower defaultallocation set inlinepower defaultallocation T o set t he def ault po wer allocation for a po rt, use th e set inl inepower defaultall ocation comm and. set inlinepowe r defaul ...

  • Cisco Systems 6500 - page 352

    2-303 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set in terfac e set interface T o conf igure the in- b and an d Serial L in e In ternet Prot ocol (SLI P) interf aces on the switc h , use the set interface command. set inte rface { sc0 | sl0 | sc 1 } { ...

  • Cisco Systems 6500 - page 353

    2-304 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set interface Usage Guid el i nes The set interfac e sc0 dchp command is valid on ly when the addr ess is learne d from the DHCP server and available in privile ged mode only. T wo conf igur able net ...

  • Cisco Systems 6500 - page 354

    2-305 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set in terfac e This exa mple sho ws ho w to releas e a DHC P-learned IP address back to the D HCP IP addr ess pool : Console> (enable) set interface sc0 dhcp release Releasing IP address...Done Consol ...

  • Cisco Systems 6500 - page 355

    2-306 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set ip alias set ip alias T o add aliases o f IP addresses, use the s et ip alias comman d. set ip alias name i p_addr Syntax Descript ion Defaults The de fault configurat ion is one IP al ias (0.0 . ...

  • Cisco Systems 6500 - page 356

    2-307 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set ip dns set ip dns T o enab le or dis able DNS, use the set ip dns comman d. set ip dns { ena bl e | di sa ble } Syntax D escr i pti on Defaults The def ault is DNS is d isabled . Comma nd T ypes Swit ...

  • Cisco Systems 6500 - page 357

    2-308 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set ip dns domain set ip dns domain T o set t he defau lt DNS doma in name, us e the set ip dns domain comman d. set ip dns domain nam e Syntax Descript ion Defaults Thi s command has no de fault set ...

  • Cisco Systems 6500 - page 358

    2-309 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set ip dns ser ver set ip dns server T o set the IP addres s of a Doma in N ame Sys tem (D NS) s erver , use t he set i p dns server comman d. set ip dns server ip_a ddr [ primary ] Syntax D escr i pti on ...

  • Cisco Systems 6500 - page 359

    2-310 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set ip fragmentation set ip fragmentation T o ena ble or d isable t he frag menta tion of IP packet s bridge d betwee n FDDI and Eth ernet networks, use the set ip fragment ation command. set ip frag ...

  • Cisco Systems 6500 - page 360

    2-311 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set i p ht tp por t set ip http port T o conf igure the TCP port numbe r for the Hype rT ext T ransfe r Protoco l (HTTP) se rve r , use the set ip http port comma nd. set ip http por t { default | po rt-n ...

  • Cisco Systems 6500 - page 361

    2-312 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set ip http server set ip http server T o e na bl e o r di sab l e th e HTT P se rver, use the se t ip http server comma nd. set ip http server { enable | disable } Syntax Descript ion Defaults The d ...

  • Cisco Systems 6500 - page 362

    2-313 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set i p p e rm it set ip permit T o enable o r disa ble the IP permit li st and to specify IP a d dresses to be added to the I P permit list , use the set ip permit com mand. set ip permit { enable | disa ...

  • Cisco Systems 6500 - page 363

    2-314 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set ip permit Exam ples This example sho ws how to add an IP address to the IP permit list: Console> (enable) set ip permit 192.168.255.255 192.168.255.255 added to IP permit list. Console> (en ...

  • Cisco Systems 6500 - page 364

    2-315 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set ip redire ct set ip redirect T o enable o r disab le ICM P re direct me ssage s on the Catalyst 6500 se ries switches, u se the set ip redirect co mman d. se t i p re d i re c t { enable | disable } S ...

  • Cisco Systems 6500 - page 365

    2-316 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set ip route set ip route T o add IP addr esses or a liases to the IP rout ing table, use the set ip route comma nd. set ip route { destination }[ / ne tmask ] { gateway } [ metric ] [ prim ar y ] Sy ...

  • Cisco Systems 6500 - page 366

    2-317 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set ip route Exam ples Th ese examples show ho w to add three d efault route s to t he IP routing tab le, che cking after each addit ion using the show ip route co mmand: Console> (enable) set ip route ...

  • Cisco Systems 6500 - page 367

    2-318 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set ip unr eachabl e set ip unreachabl e T o enable or disable ICMP unreac hable messages on the Catalys t 6500 series switc h, use the set ip unrea chable command. set i p u nreach a b le { enable | ...

  • Cisco Systems 6500 - page 368

    2-319 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set kerbe ros clients m and atory set kerberos clients ma ndatory T o make K erberos authentica tion mandatory for authentica ting to services on the netw ork, use the se t kerb ero s clients ma ndatory c ...

  • Cisco Systems 6500 - page 369

    2-320 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set kerbero s credentials f orward set kerberos credentials fo rward T o conf ig ure clients to forwa r d users’ credentia ls as they conne ct to other hosts in the Ke rberos realm, use the set k e ...

  • Cisco Systems 6500 - page 370

    2-321 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set kerb eros loca l-real m set kerberos local-realm T o conf ig ure a switch to authentica te us ers defin ed in the Ker beros database, use the set kerberos local-r ealm co mmand . set ker b eros lo ca ...

  • Cisco Systems 6500 - page 371

    2-322 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set k erb eros r eal m set kerberos realm T o map th e name of a Kerbe ros realm to a DNS domai n name or a host name, use the set ke rberos realm comm and. set k erb eros rea lm { dns_domai n | host ...

  • Cisco Systems 6500 - page 372

    2-323 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set kerb eros s erver set kerberos server T o s pecify whi ch Key Distribution Ce nte r (K DC) to us e on t he sw itch , use the se t kerberos serv er comm and. set ker b eros s erver ke rberos_r ea lm { ...

  • Cisco Systems 6500 - page 373

    2-324 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set kerbero s srvtab entry set kerberos srvtab ent ry T o enter the SR VT AB f ile directly into the switch fr o m the command li ne, use the set kerberos srvtab entry command. set ker beros s rvtab ...

  • Cisco Systems 6500 - page 374

    2-325 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set kerbe ros srvt ab entry Exam ples This example sho ws how to enter a SR VT AB file di rectly into the switch: Console> (enable) set kerberos srvtab entry host/niners.cisco.com@CISCO.COM 0 932423923 ...

  • Cisco Systems 6500 - page 375

    2-326 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set kerber os srvtab rem ote set kerberos srvtab re mote T o p rovide t he sw it ch w it h a c opy of the SR VT A B file from t h e KD C t ha t c onta ins th e sec r et key , us e the set ke rbero s ...

  • Cisco Systems 6500 - page 376

    2-327 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set key conf ig-key set key config-key T o d efine a private 3DES key , use the set key conf ig-ke y command . set key conf ig-key string Syntax D escr i pti on Defaults Thi s command has no de fault sett ...

  • Cisco Systems 6500 - page 377

    2-328 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set l2pr otocol-tunne l cos set l2protoco l-tunnel c os T o apply a CoS va lue to all ingress tunneling ports, use the set l2protocol-tunnel cos comm and. set l2protoc ol-tunnel cos cos -val ue Synta ...

  • Cisco Systems 6500 - page 378

    2-329 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set l2prot oco l-tun nel trunk set l2protoco l-tunnel trun k T o set La yer 2 proto col tunnel ing on tru nks, use the set l2pr ot ocol-tunnel trunk command. set l2protoc ol-tunnel trunk { enable | disabl ...

  • Cisco Systems 6500 - page 379

    2-330 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set lac p-channel system-p riority set lacp-channe l system-priority T o set t he priority o f the sy stem, use th e set lacp-channel system-priority command. set lacp-channel sy stem-pr iority va lu ...

  • Cisco Systems 6500 - page 380

    2-331 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set lcperror actio n set lcperrorac tion T o con figure h ow your sy stem ha ndle s Li nk Cont rol Proto co l (L CP) e rro rs when a m odu le repor t s an ASIC proble m to the NMP , use the set lcperrorac ...

  • Cisco Systems 6500 - page 381

    2-332 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set lda set lda T o conf ig ure the ASLB information on the Catal y st 6500 series switch, use the set lda comm and. set lda enable | di sable set lda vip { server _ vi rtua l_ ip } { destin ation _ ...

  • Cisco Systems 6500 - page 382

    2-333 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set ld a Usage Guid el i nes This c omm and is suppor ted on ly o n sw itc he s configu red w ith th e Supe r visor En gine 1 wi th L aye r 3 Switching Engine WS-F6K-PFC (Pol icy Feature Card) . Y o u can ...

  • Cisco Systems 6500 - page 383

    2-334 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set lda This e xample sho ws ho w to specify th e router VLAN: Console> (enable) set lda router 110 4/26 Successfully set router vlan and ld port. Use commit lda command to save settings to hardwa ...

  • Cisco Systems 6500 - page 384

    2-335 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set l e n g th set length T o conf igure the nu mber of lin es in t he terminal d isplay screen, u se the se t length co mman d. set length nu mber [ default ] Syntax D escr i pti on Defaults The de fault ...

  • Cisco Systems 6500 - page 385

    2-336 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set localuser set localuser T o conf igure the switch to u se loc al user authenticatio n to auth en tic ate ac ces s o n the s witch, use the set localuser command. set lo cal use r aut hen t ica ti ...

  • Cisco Systems 6500 - page 386

    2-337 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set l o c a lu ser Exam ples This examp le sho ws how to use th e create a loca l user accou nt, including pa sswor d and pri vilege lev el: Console> (enable) set localuser user picard password captain ...

  • Cisco Systems 6500 - page 387

    2-338 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set logging buffer set logging bu ffer T o lim it the nu mber of sy stem l oggi ng me ssa ges buffered, use t he set logging buffer command. set lo gging buffer bu ff er _ si z e Syntax Descript ion ...

  • Cisco Systems 6500 - page 388

    2-339 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set loggin g callhom e set logging ca llhome T o enable or disable the CallHome featu re, use the set logging callhome comman d. set logging callhome { enable | disable } Syntax D escr i pti on Defaults C ...

  • Cisco Systems 6500 - page 389

    2-340 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set logging callhome Relat e d Commands clear lo gging callhome clear logging call home fr om clear logging callhome reply-t o clear logging callhome severit y clear logg ing ca llho me sm tp-s erver ...

  • Cisco Systems 6500 - page 390

    2-341 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set logg in g callhome d esti nat ion set logging ca llhome desti nation T o set the Call Home destinatio n address to recei ve the CallHo me messages, frag ment size, SNM P prof ile and SNMP index, use t ...

  • Cisco Systems 6500 - page 391

    2-342 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set logging callhome destination Console> (enable) set logging callhome destination adminjane@cisco.com Included adminjane@cisco.com in the table of callhome destination addresses. Messages will b ...

  • Cisco Systems 6500 - page 392

    2-343 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set loggin g callhom e f rom set logging ca llhome from T o set t h e Fro m e-mai l addres s used by the Ca llHome feat ure, use th e s et logging callhome fr om comm and. set logging callhome fr om E_add ...

  • Cisco Systems 6500 - page 393

    2-344 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set logg ing call home reply- to set logging ca llhome reply-t o T o set the Reply-to e-mail ad dress, use the set logging c a llhome r eply-to comman d. set logging callhome r eply-to E_addr Syntax ...

  • Cisco Systems 6500 - page 394

    2-345 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set loggin g callhom e s everity set logging ca llhome severity T o specify the CallHo me sev erity lev el o f system messages to captu re, use the set logging callhome severity command . set logging ca l ...

  • Cisco Systems 6500 - page 395

    2-346 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set logging callhome severity Exam ples This example shows how to set the se verity to le vel 3: Console> (enable) set logging callhome severity 3 Callhome severity level set to 3 Console> (ena ...

  • Cisco Systems 6500 - page 396

    2-347 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set loggin g callhome s mtp-s erv er set logging ca llhome smtp-server T o de signat e an I P addre ss as an SMTP serv er used b y the CallHome f eature, use the set logging callh ome s mtp- server co mma ...

  • Cisco Systems 6500 - page 397

    2-348 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set logging console set logging co nsole T o enable and disable the sendi ng of sy stem l ogging messages to the console , use t he set logging co nsole comm and. set loggi ng consol e { en a ble | d ...

  • Cisco Systems 6500 - page 398

    2-349 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set logg in g history set logging hist ory T o s et the numbe r an d s ev erity level of sysl og me ssa ges sent t o the sysl og history ta ble, u se the se t log ging his tor y command . set loggi ng hi ...

  • Cisco Systems 6500 - page 399

    2-350 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set loggi ng level set logging leve l T o set the faci lity and se verity lev el used when logging system messages, use the se t logging level comm and. set logging le vel facility se verity [ defaul ...

  • Cisco Systems 6500 - page 400

    2-351 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set l o g g in g leve l Defaults The defau lt is faci lity is set to all , and leve l is se t to 0 . Comma nd T ypes Swit ch co mman d. Command Mode s Pri vile ged. Usage Guid el i nes Y ou can a lso set ...

  • Cisco Systems 6500 - page 401

    2-352 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set loggi ng level Exam ples This example shows h ow to set the default f acility and se verity le vel for system message logging: Console> (enable) set logging level snmp 2 default System logging ...

  • Cisco Systems 6500 - page 402

    2-353 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set logg ing se rve r set logging server T o ena ble and disa ble system m essage lo gging to co nfigured syslo g se rvers a nd t o add a s yslog se rver to the sy stem loggin g serv er table, use the set ...

  • Cisco Systems 6500 - page 403

    2-354 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set logging server Comma nd T ypes Swit ch co mman d. Command Mode s Pri vile ged. Usage Guid el i nes Y ou ca n also se t the loggin g lev el by using th e set l ogging level command. I f you do not ...

  • Cisco Systems 6500 - page 404

    2-355 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set l o g g in g sess io n set logging sessi on T o enable o r disab le the sending of sy stem log ging me ssages to the c urrent log in session , use the set logging session co mmand . set logging sessio ...

  • Cisco Systems 6500 - page 405

    2-356 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set logging telnet set logging teln et T o enab le or dis able loggi ng on T elnet session s, use the set loggin g telnet command . set lo gging te ln et { en a b le | disa ble } Syntax Descript ion ...

  • Cisco Systems 6500 - page 406

    2-357 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set l o g g in g tim esta mp set logging timestamp T o enab le or disabl e the time -stamp displ ay on system logging m essages, us e the set logg ing times tamp comm and. set loggi ng ti mestamp { ena bl ...

  • Cisco Systems 6500 - page 407

    Chapter 2 Ca talyst 6 500 Series Swi tch and ROM M onitor Comm ands set logout 2-358 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 22 set logout T o set the number of minutes until th e system d isconnects an idle se ssion automatica lly , use the set logout command. set logout timeout Syntax Descript ion Defaults The de ...

  • Cisco Systems 6500 - page 408

    2-359 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set m l s ag in gt ime set mls agingtime T o specify the MLS agin g time of shortcuts to an MLS entry in the Catalyst 6500 series switches, use the set mls agingtime comm and. set mls aging time [ ip | ip ...

  • Cisco Systems 6500 - page 409

    2-360 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set mls agingti m e If you ente r any of the set mls commands on a Cat a lyst 65 00 series sw itch without MLS, this wa rning message di splays: MLS not supported on feature card . The agingtime v al ...

  • Cisco Systems 6500 - page 410

    2-361 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set m l s ag in gt ime Relat e d Commands clear mls statistics entry show mls ...

  • Cisco Systems 6500 - page 411

    2-362 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set mls bridged-flow-statistics set mls bridged-f low-statistics T o enable o r disable sta tistics for bridged flo ws for specif ied VLANs, use the se t mls bridged- flow-s tat istics command. set m ...

  • Cisco Systems 6500 - page 412

    2-363 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set mls cef l oad -balan ce set mls cef load-bal ance T o in cl ude or exclu de L ayer 4 por ts in a l oa d-b ala nci ng hash, use th e se t m ls cef load-balanc e comm an d. set mls ce f l oad-b alance { ...

  • Cisco Systems 6500 - page 413

    2-364 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set mls cef per-prefix-statistics set mls cef per-prefix-statistics T o set MLS CEF per -prefix s tatistics mode, use the set m ls c ef per-pr efix statistics command. set mls cef pe r -pref ix st at ...

  • Cisco Systems 6500 - page 414

    2-365 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set mls excl ude prot oco l set mls exclude protoco l T o exclude an M LS protoco l port on a switc h configured with the Supervis or Engin e 1 with Layer 3 Switching Engine WS-F6K-PFC, use the set mls ex ...

  • Cisco Systems 6500 - page 415

    2-366 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set mls flow set mls flow T o specif y the minim um flo w mask used for MLS, use the set mls flow comman d. Thi s comma nd is needed to collect statistics f or the superv isor engin e. set mls flow { ...

  • Cisco Systems 6500 - page 416

    2-367 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set m ls flow Exam ples Th ese examples show how to specify that only expired flows to subnet 171. 69.194.0 a re exported: Console> (enable) set mls flow destination Configured flow mask is set to dest ...

  • Cisco Systems 6500 - page 417

    2-368 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set m ls nd e set mls nde T o conf ig ure the NetFlo w Data Export (NDE) featu re in the Catalyst 6500 series switches to allo w comman d-export ing stati stics to be sent to the preco nfigured colle ...

  • Cisco Systems 6500 - page 418

    2-369 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set m ls nde Defaults The def aults are N etflo w Data Export v ersion 7, and all exp ired flo ws are expo rted until th e f ilter is specif ied explicitly . Destination ifInde x su pport and source ifInd ...

  • Cisco Systems 6500 - page 419

    2-370 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set m ls nd e Use th e foll ow ing s yntax to speci fy an IP subn et address : • ip_subnet _addr —T his i s the sho rt su bnet addr e ss form at. T he t rai ling de cim al n umbe r 0 0 in an IP a ...

  • Cisco Systems 6500 - page 420

    2-371 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set m ls nde This e xample sho ws how to specify that all e xpired flows e xce pt those from a specif ic host to a specific destin ati on port are export ed: Console> (enable) set mls nde flow exclude ...

  • Cisco Systems 6500 - page 421

    2-372 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set mls rate set mls rate T o set the rate at which inde x-directed pac kets are sent to the MSFC , use the set mls rate comm and. set mls rate kpps Syntax Descript ion Defaults The kpp s argume nt i ...

  • Cisco Systems 6500 - page 422

    2-373 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set mls sta ti st ic s protocol set mls statistics proto col T o add protocols to the protocols stat istics list, use the set mls stat isti cs protocol command. set mls sta tistics protocol pr otoc ol src ...

  • Cisco Systems 6500 - page 423

    2-374 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set mls verify set mls verify T o enab le or disab le ch ecksu m or packet ch eckin g based on packe t lengt h, use the set mls verify comm and. set mls veri fy checksum { enab le | disa ble } set ml ...

  • Cisco Systems 6500 - page 424

    2-375 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set ml s verif y Exam ples This examp le sho ws how to en able IP checksu m: Console> (enable) set mls verify checksum enable Ip checksum verification enabled Console> (enable) This exam ple sh ows ...

  • Cisco Systems 6500 - page 425

    2-376 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set module set module T o enab le or disa ble a m odule, use th e set module comm and. set m o du le en a ble | disable mod Syntax Descript ion Defaults The def ault is all module s are en abled. Com ...

  • Cisco Systems 6500 - page 426

    2-377 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set modul e This exampl e shows ho w t o disable mod ule 2 when connect ed via a T elnet sessi on: Console> (enable) set module disable 2 This command may disconnect your telnet session. Do you want to ...

  • Cisco Systems 6500 - page 427

    2-378 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set module na me set module name T o set th e name for a module, use the set module name command. set module name mod [ mod_n ame ] Syntax Descript ion Defaults The defaul t is no module names are co ...

  • Cisco Systems 6500 - page 428

    2-379 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set modul e po wer set module power T o turn the po wer on or off to a module , use the set module pow e r comman d. set module power up | do wn mod Syntax D escr i pti on Defaults The de fault is power i ...

  • Cisco Systems 6500 - page 429

    2-380 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set module shutdown set module shutdown T o shut down the N AM and Intrusion Dete ction Syste m Module (I DSM), use the set module shutdown comm and. set module shutdow n all | mod Syntax Descript io ...

  • Cisco Systems 6500 - page 430

    2-381 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set msfcaut ostate set msfcautostate T o enable o r disa ble the line protocol state determinatio n of the Multilayer Switch Fea ture Cards (MSFC s) du e to p o rt st ate c ha nges , us e th e se t msfcau ...

  • Cisco Systems 6500 - page 431

    2-382 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set msmautostate set msmautost ate T o en able or disa ble th e line protocol st ate de termina tion of t he MSMs due to port state ch ange s, use the set msmautostate command . set msmautostate { en ...

  • Cisco Systems 6500 - page 432

    2-383 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set m u ltic ast rou te r set multicast router T o conf igure a port manually as a multi cast router por t, use the se t multi cast router command . set multi cast rout er m od/port Syntax D escr i pti on ...

  • Cisco Systems 6500 - page 433

    2-384 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set n tp broa dcastclient set ntp broadcastc lient T o ena ble o r disab le NT P in br oadc ast- cli ent mode , use t h e set ntp broadcastclient comman d. set ntp broadcastclie nt { ena b le | di sa ...

  • Cisco Systems 6500 - page 434

    2-385 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set ntp broad castd el ay set ntp broadcastd elay T o conf igure a tim e-adjust ment fact or so t he Catalys t 6500 serie s switch can recei ve broadcast p ackets, use the set ntp broadcastdelay comm and. ...

  • Cisco Systems 6500 - page 435

    2-386 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set n tp client set ntp client T o enable or disabl e a Catalyst 6500 ser ies switch as an NTP client, use the set ntp client command. set ntp client { enab le | disa ble } Syntax Descript ion Defaul ...

  • Cisco Systems 6500 - page 436

    2-387 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set nt p server set ntp server T o s peci fy t he N T P server addr ess and co nfigure an N TP se rver au th en tica tio n key , us e the se t ntp server command. set ntp serv er ip_addr [ key public_keyn ...

  • Cisco Systems 6500 - page 437

    2-388 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set ntp sum mertime set ntp summertime T o set th e clock ahead on e hour durin g dayli ght saving time, u se the set ntp summertime command. set ntp summertime { ena ble | disable } [ zone ] set ntp ...

  • Cisco Systems 6500 - page 438

    2-389 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set nt p summert ime Exam ples Th is exampl e shows how to caus e the syst em t o set the clock ahea d one ho ur du ring da ylight s aving time: Console> (enable) set ntp summertime enable PDT Summerti ...

  • Cisco Systems 6500 - page 439

    2-390 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set ntp time zone set ntp timezone T o conf igure the time o ff set from Gr ee nwi ch M ea n T im e, use the set ntp timezone comm and. set timezone [ zone_n ame ] [ hou rs [ minutes ]] Syntax Descri ...

  • Cisco Systems 6500 - page 440

    2-391 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set pa ssword set password T o chan ge the lo gin passw ord on the CLI , use the set password command. set password Syntax D escr i pti on This comm a nd ha s n o argume nts or keyword s. Defaults The de ...

  • Cisco Systems 6500 - page 441

    2-392 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set pbf set pbf T o enable po licy - based for warding (PBF) and to s et a MA C address for th e PFC2, use the set pbf comm and. set pbf [ mac mac_add r ess ] Syntax Descript ion Defaults Y ou can us ...

  • Cisco Systems 6500 - page 442

    2-393 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set pb f Relat e d Commands clear pbf show pbf ...

  • Cisco Systems 6500 - page 443

    2-394 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set pbf-map set pbf-map T o create security A CLs and to set adjace ncy inform ation, use the set pb f-map command. set pbf -ma p { ip_addr_1 } { m ac_ addr_1 } { vlan_1 } { ip _addr_2 } { m ac_addr_ ...

  • Cisco Systems 6500 - page 444

    2-395 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set p bf- m ap If you wan t to add entries other then redirect A CEs to the adjacenc y table, use the set security acl ip PBF_M AP_A CL_(VLA N_ID ) command. Exam ples Th is example shows how to specify a ...

  • Cisco Systems 6500 - page 445

    2-396 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set pbf vlan set pbf vlan T o cre ate poli cy-based for ward (PBF ) Layer 2 CAM ent ries on a VLAN, use the set pb f vlan command . set pbf vl an vlan Syntax Descript ion Defaults Thi s command has n ...

  • Cisco Systems 6500 - page 446

    2-397 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set port arp-i nspec tion set port arp-ins pection T o set Addre ss Recogni tion Protocol (ARP) inspec tion thre sholds on a per-port basi s, use the set por t arp-inspection comman d. set port arp-inspec ...

  • Cisco Systems 6500 - page 447

    Chapter 2 Ca talyst 6 500 Series Swi tch and ROM M onitor Comm ands set por t auxiliaryvlan 2-398 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 2 set port auxiliaryv lan T o conf ig ure the auxiliary VLA N ports, use the set port auxiliaryvlan comm and. set port au xil iaryvla n mo d [ /port ] { vlan | untagged | do t1p ...

  • Cisco Systems 6500 - page 448

    2-399 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set port auxi liaryv lan Exam ples This example sh o ws ho w to set t h e auxilia ry VLAN p ort to untagged : Console> (enable) set port auxiliaryvlan 5/7 untagged Port 5/7 allows the connected device ...

  • Cisco Systems 6500 - page 449

    2-400 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set po rt br oa dca s t set port broadca st T o set broadcast, multica st, or unicast suppressi on for one or more ports, use the set port broadcast command. The threshold limi ts the b ackplane traf ...

  • Cisco Systems 6500 - page 450

    2-401 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set port b roa dcast Exam ples This example sho ws how to limit broadcast tra ff ic to 20 percent: Console> (enable) set port broadcast 4/3 20% Port 4/3 broadcast traffic limited to 20.00%. Console> ...

  • Cisco Systems 6500 - page 451

    2-402 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port c hannel set port channel T o con figure E the rCh an nel on E th erne t m odule p orts, u se the set port channel comm and. set port channel mod/port [ adm in_gr oup ] set port channel mod/ ...

  • Cisco Systems 6500 - page 452

    2-403 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set port chan nel Defaults The def ault is EtherChann el is set to auto and silent on all module port s. The de faults for fra me distribution ar e ip and both . Comma nd T ypes Swit ch co mman d. Command ...

  • Cisco Systems 6500 - page 453

    2-404 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port c hannel Note With software re leas es 6 .2( 1) a nd ear lier, the 6- and 9- slot C ataly st 6500 se ries swi tch es supp ort a maximum of 12 8 EtherCh annels. W i th software re lease s 6.2 ...

  • Cisco Systems 6500 - page 454

    2-405 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set port chan nel Relat e d Commands show channel sho w chann el gr oup show port channel ...

  • Cisco Systems 6500 - page 455

    2-406 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port c ops set port cops T o create port role s, use the set port cops command. set port cops mod / port rol e s ro l e 1 [ ro l e 2 ]. .. Syntax Descript ion Defaults The de fault is all por ts ...

  • Cisco Systems 6500 - page 456

    2-407 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set port debo unce set port debounce T o enabl e or disab le the de bounce t imer or co nfigure the time r setting on a per-port basis , use the set port debounce command. set port debounce mod/port { ena ...

  • Cisco Systems 6500 - page 457

    2-408 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set po rt de bo unc e For 10/100 ports and 100BASE-FX ports in the disa bled state , the firmware may take up to 600 milliseconds to no tif y the supe rviso r en gi ne of a lin k chan ge b eca u se t ...

  • Cisco Systems 6500 - page 458

    2-409 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set port disab le set port disable T o disa ble a port or a ra nge of por ts, use the set port disable co mmand . set port disable mod/ port Syntax D escr i pti on Defaults The default sy stem co nfigura ...

  • Cisco Systems 6500 - page 459

    2-410 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port dot1q-all-tagged set port dot1q-all-tagged T o enable the 802.1 Q tagging feature o n specif ic ports, use the set port do t1q-all-tagged comm and. set po rt d o t1q- all-ta gge d { mod/ por ...

  • Cisco Systems 6500 - page 460

    2-411 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set port dot 1q-all-tagg ed Relat e d Commands set dot1q- all-t agged show dot1q-all-tagged show port dot1q-all-tagged ...

  • Cisco Systems 6500 - page 461

    2-412 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set po rt dot1 qtu nn el set port dot1qtunne l T o co nfigure th e dot1 q t un ne l mo de f or t he po rt , use t he set port dot 1qtunnel command. set port dot1qtunnel mod/ port { access | disable } ...

  • Cisco Systems 6500 - page 462

    2-413 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set port dot 1qtunnel This examp le shows the output if you try t o turn o n trunki ng on a p ort that ha s dot1q tu nneling m ode set: Console> (enable) set trunk 4/1 on Failed to set port 4/1 to trun ...

  • Cisco Systems 6500 - page 463

    2-414 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set po rt dot1x set port dot1x T o conf igure do t1x on a port, u se the set port dot1x comman d. set port dot1x mod/port multiple-host { enable | disable } set port dot1x mod/port { port-control po ...

  • Cisco Systems 6500 - page 464

    2-415 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set port dot1x Defaults The def ault settings are as follo ws: • The defaul t port _control_value is f orce-au thorized . • The mu lti ple h ost f eat ur e is disa ble d. • The re authe ntica tio n ...

  • Cisco Systems 6500 - page 465

    2-416 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set po rt dot1x This exam ple shows how to in itia lize dot 1x on a po rt: Console> (enable) set port dot1x 4/1 initialize dot1x port 4/1 initializing... dot1x initialized on port 4/1. Console> ...

  • Cisco Systems 6500 - page 466

    2-417 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set port dupl ex set port duplex T o configu re the dup lex type of a n Ethe rn et p ort o r a ra nge o f p ort s, use the set port duplex comm and . set port duplex mo d/port { full | half } Syntax D esc ...

  • Cisco Systems 6500 - page 467

    2-418 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set por t enable set port enable T o ena bl e a port or a r ang e of po rts, use th e se t port e nable command. set port enable mod/po rt Syntax Descript ion Defaults The def ault is all port s are ...

  • Cisco Systems 6500 - page 468

    2-419 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set port errdi sable-t ime out set port errdisable-timeout T o prevent an er rdisabl ed port fr om bei ng enab led, use t he set port e rrdisable-time out comm and. set port errdisable-ti meout mod/ port ...

  • Cisco Systems 6500 - page 469

    2-420 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port flowcontrol set port flowcontrol T o co nf igure a port to send or recei ve p ause fr ames, use the set por t flowcon tr ol comm and. Pau se frame s are specia l packet s tha t signa l a sou ...

  • Cisco Systems 6500 - page 470

    2-421 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set port flowcont rol Ta b l e 2 - 1 6 descri bes guid eli nes for differe nt c onfigura tions o f the send a nd re ce i ve ke ywor ds. Exam ples Th is example shows how to configure port 1 of mo dule 5 t ...

  • Cisco Systems 6500 - page 471

    2-422 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set p ort gm rp set port gmrp T o enable or disable GMRP on the specified ports in all VLANs, use the set port gmrp command . set port g mrp mod/po rt { ena ble | disable } Syntax Descript ion Defaul ...

  • Cisco Systems 6500 - page 472

    2-423 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set port gvrp set port gvrp T o enable or disable GVRP on the specif ied ports in all VLA Ns, use the set port gvrp command. set po rt g v rp mod/po rt { enable | di sable } Syntax D escr i pti on Default ...

  • Cisco Systems 6500 - page 473

    2-424 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port g vrp This examp le shows what happens if you try t o enabl e GVRP on a spe cific port when G VRP has not first been e na ble d u si ng t he set gvrp comman d: Console> (enable) set port ...

  • Cisco Systems 6500 - page 474

    2-425 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set po rt host set port host T o optimize the port co n figur ation for a host connec tion, use the set port host command . set port host mod/ port Syntax D escr i pti on Defaults Thi s command has no de ...

  • Cisco Systems 6500 - page 475

    2-426 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set p ort inlinepower set port inlinepower T o s et the i nli ne power mo de of a po rt or group of p orts, u se t he set port inline power command . set po rt i nl in epow er mod /port { auto | stat ...

  • Cisco Systems 6500 - page 476

    2-427 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set por t inlinepow er This exam ple sh ows the o utput i f th e inl ine power fea tu re is not s uppo rte d: Console> (enable) set port inlinepower 2/3-9 auto Feature not supported on module 2. Consol ...

  • Cisco Systems 6500 - page 477

    2-428 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port jumbo set port jumbo T o enab le or dis able the jumbo frame fea ture on a per- port ba sis, use the set port ju mbo comm an d. set port ju mbo mo d/port { enable | disable } Syntax Descript ...

  • Cisco Systems 6500 - page 478

    2-429 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set port l2 prot ocol-tun nel set port l2protoco l-tunnel T o set La yer 2 proto col tunnel ing para meters, use the set port l2protocol-tunnel command. set port l2protocol-tunnel mod/port { cdp | stp | v ...

  • Cisco Systems 6500 - page 479

    2-430 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port l2protocol- tunnel • 20 Layer 2 pro tocol tun neling po rt x 50 VLAN s • 100 Lay er 2 pr otoc ol tunne ling por t x 10 VLAN s Note Th e shut down thresho ld factor s hould exceed the dro ...

  • Cisco Systems 6500 - page 480

    2-431 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set port lacp-cha nnel set port lacp-channe l T o set the pr iority v alue for ph ysi cal por ts, to assign an ad mi nistra ti ve ke y to a particular set of por ts, or to change the chan nel mode for a s ...

  • Cisco Systems 6500 - page 481

    2-432 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set p ort lacp -channel • Y ou ca n assig n a ma ximu m o f 8 port s to a n a dmini str ative key . • If you assign a n admin istrative ke y to a channe l that was previously assigne d a part icu ...

  • Cisco Systems 6500 - page 482

    2-433 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set port m acro set port macro T o execute a co nfiguration ma cro on a per-port basis, us e the set port macr o comma nd. set po rt m a cro mod/por ts... ciscoipphone vlan vlan [ auxvl an au xvlan ] set ...

  • Cisco Systems 6500 - page 483

    2-434 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port macro Exam ples This exampl e sho w s ho w to ex ecute the Cisco IP Phone conf iguration macro w ith an au xiliary VL AN: Console> (enable) set port macro 3/1 ciscoipphone vlan 2 auxvlan ...

  • Cisco Systems 6500 - page 484

    2-435 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set port m acro VLAN Mod/Ports ---- ----------------------- 32 3/1 16/1 Port 3/1 will not send out CDP packets with AuxiliaryVlan information. Executing autoqos........ All ingress and egress QoS scheduli ...

  • Cisco Systems 6500 - page 485

    2-436 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port membership set port membership T o set t h e VLAN membership assignmen t to a port, u se the set port membership comm and. set port membership mod/port { dy namic | static } Syntax Descript ...

  • Cisco Systems 6500 - page 486

    2-437 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set port m ember ship Relat e d Commands set pvlan set pvlan mapping set vlan set vlan mapping ...

  • Cisco Systems 6500 - page 487

    2-438 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port name set port name T o co nf igure a name for a port, use th e set port name command. set port name mod/po rt [ port _name ] Syntax Descript ion Defaults The default is no po rt n am e i s c ...

  • Cisco Systems 6500 - page 488

    2-439 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set p ort nego tia t ion set port negotiatio n T o enabl e or disab le the l ink negotiat ion prot ocol on th e specified port , use t he set port negotiation comm an d. set port negotiation mod/ port { e ...

  • Cisco Systems 6500 - page 489

    2-440 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set por t protocol set port protocol T o enab le or dis able prot ocol member ship of por ts, use the se t port protocol co mman d. set port protocol mod/port { ip | ipx | group } { on | off | auto } ...

  • Cisco Systems 6500 - page 490

    2-441 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set port prot ocol Relat e d Commands show port protocol ...

  • Cisco Systems 6500 - page 491

    2-442 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set po rt qo s set port qos T o specify wheth er an interface is interpreted as a physica l port or as a VLAN, use the set port qos comm and. set port qos mod/ports... port-based | vlan-based Syntax ...

  • Cisco Systems 6500 - page 492

    2-443 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set port qos This e xample sho ws the outp ut if you cha nge from por t-based QoS to VLAN-b ased QoS with ei ther RSVP or CO PS enabled on the po rt: Console> (enable) set port qos 3/1-48 vlan Qos inte ...

  • Cisco Systems 6500 - page 493

    2-444 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set por t qos auto qos set port qos autoqos T o appl y the auto matic Qo S feature on a pe r-port basis, use the set port qo s autoqos command. set port qos mod/p ort auto qos trust { cos | dscp } se ...

  • Cisco Systems 6500 - page 494

    2-445 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set por t qo s au toqos Relat e d Commands set qos a utoqos show port qo s show qos acl inf o ...

  • Cisco Systems 6500 - page 495

    2-446 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port qos cos set port qos cos To set th e def ault val u e for all pa c kets th at hav e arri ve d throug h an un truste d p ort, use the set port qo s cos command. set port qos mod/ports cos cos ...

  • Cisco Systems 6500 - page 496

    2-447 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set p ort qos policy -source set port qos policy-source T o set the QoS policy source for all ports in the specifi ed module, use the set port qos policy-sourc e comm and. set port qos policy-source mod/p ...

  • Cisco Systems 6500 - page 497

    2-448 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port qo s policy-s ource This e xample shows the output if you set the policy so urce to COPS a n d the sw itch is set to l ocal configurati on (usi ng the set qos policy-source command): Console ...

  • Cisco Systems 6500 - page 498

    2-449 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set por t qo s tr ust set port qos trust T o set the trusted state o f a port, use the set port qos trust comm and; for exam ple, whether or not t he pack ets ar ri ving at a port a r e tru sted to carry ...

  • Cisco Systems 6500 - page 499

    2-450 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port qos t rust Relat e d Commands set port qos set port qos cos show port qo s show qos inf o ...

  • Cisco Systems 6500 - page 500

    2-451 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set p ort qos trust -device set port qos trust-device T o co nfigure the t rus t mode on a por t on a speci fic device or module , use the set port qos trust-device comm and. set port qos mod/ports... tru ...

  • Cisco Systems 6500 - page 501

    2-452 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port q os trust-ext set port qos trust-ext T o conf igure the access port on a Cisco I P phone conn ected to th e switch por t, use the set port qos trust- ext com mand . set port qos mod/ports.. ...

  • Cisco Systems 6500 - page 502

    2-453 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set port rsv p ds bm-ele ction set port rsvp dsbm-election To specif y whether or not the swi tch participa tes in the Designated S ubnet Bandwidth Manage r (DSBM) elec tion o n t h at par ti cula r se gm ...

  • Cisco Systems 6500 - page 503

    2-454 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port security set port security T o con figure p or t secur it y o n a por t or r ange of po rts, use th e set p o rt se c uri ty command . set po rt s ec u rity mod [ /port... ] [ enable | disab ...

  • Cisco Systems 6500 - page 504

    2-455 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set po rt secur ity Usage Guid el i nes This c omm and is not sup port ed by t he NAM. If you ente r the set port s ecurity enable command bu t do not specify a MA C address, the f irst MA C addr ess seen ...

  • Cisco Systems 6500 - page 505

    2-456 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port security Relat e d Commands clear por t security sho w port security ...

  • Cisco Systems 6500 - page 506

    2-457 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set po rt speed set port speed T o conf igure the sp eed of a po rt interf ace, use the set port speed comman d. set port spee d mod/ port { 10 | 100 | 1000 | auto } Syntax D escr i pti on Defaults The de ...

  • Cisco Systems 6500 - page 507

    2-458 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port sync-restart-delay set port sync-restart-del ay T o s pecify the s ync hroni zati on re sta rt d ela y of a por t, use t he s et port sync- resta rt-delay com mand. set p ort sync -resta rt- ...

  • Cisco Systems 6500 - page 508

    2-459 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set po rt trap set port trap T o enab l e or di sable t he ope ra tion of the st anda rd Simple N etwo rk M anag emen t Prot ocol (SNM P) link trap (up or down) for a por t or range of ports, use th e set ...

  • Cisco Systems 6500 - page 509

    2-460 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port unicast -flood set port unicast-fl ood T o configure t he swit ch to drop Unicast Flood traffic on an Ether net port, use the set po rt unicast-flood comm and. set port unicast-flood mod/ po ...

  • Cisco Systems 6500 - page 510

    2-461 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set p ort uni c a s t- fl ood This exam ple sh ows how to disab le unic ast floo d tr affic on modu l e 4, po rt 1 of a switc h: Console> (enable) set port unicast-flood 4/1 enable Unicast Flooding is ...

  • Cisco Systems 6500 - page 511

    2-462 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port vo ice inter face dh cp set port voice interface dhcp T o set t he port v oice interf ace for the DHCP , TFTP , and D NS server s, use the set po rt voi ce in t er fa ce dhcp comma nd. set p ...

  • Cisco Systems 6500 - page 512

    2-463 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set port voi ce i nterface dhcp Exam ples This example sho ws how to enable the port v oice interface for th e DHCP server: Console> (enable) set port voice interface 7/4-8 dhcp enable Port 7/4 DHCP en ...

  • Cisco Systems 6500 - page 513

    2-464 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port vtp set port vtp T o enable or disabl e VLAN Trunk Protocol (VTP) on a per-port basis, use th e set port vt p command. set port vtp mo d/port { enable | disable } Syntax Descript ion Default ...

  • Cisco Systems 6500 - page 514

    2-465 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set power re dundanc y set power redundan cy T o tu rn redun da ncy b etwee n the p ower suppli es on or o ff, use the set power r edundancy command. set power re dundancy { enabl e | disable } Syntax D e ...

  • Cisco Systems 6500 - page 515

    2-466 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set prompt set prompt T o change the prompt for the CLI, use the set prompt com mand. set prompt pr ompt_ stri ng Syntax Descript ion Defaults The de fault is the prom pt is set to Console >. Comm ...

  • Cisco Systems 6500 - page 516

    2-467 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set p rot o c o lf il ter set protocol filter T o acti vate or deact iv ate protocol f iltering on Ether net VLANs and on nontrun king Ethernet, Fast Ether net, and Gigabit Et hern et port s, use the set ...

  • Cisco Systems 6500 - page 517

    2-468 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set pvlan set pvlan T o bind the iso lated or co mmunit y VLAN to the prim ary VLAN and assign the is olated or community ports to the pri va te VLAN, use the set pvlan comma nd. set pvlan pri mary _ ...

  • Cisco Systems 6500 - page 518

    2-469 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set pv lan Exam ples Th is example shows ho w to map VLA Ns 901, 902 , and 903 (isolated or commu nity VLA Ns) to VLA N 7 (the p rima ry V L AN) : Console> (enable) set pvlan 7 901 4/3 Port 4/3 is succ ...

  • Cisco Systems 6500 - page 519

    2-470 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set pvla n mapping set pvlan mapping T o map isolated or commun ity VLANs to the primary VLAN on the pr omiscuous port, use the set pvl an mapping comm an d. set pvlan mapping prim ary_v lan { isol a ...

  • Cisco Systems 6500 - page 520

    2-471 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set pvlan ma pping Relat e d Commands clear pvlan mapping clea r vlan set pvlan set vlan show pvlan show pvlan mapping show vlan ...

  • Cisco Systems 6500 - page 521

    2-472 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos set qos T o turn on or turn of f QoS functionality on the switch , u se the set qos command. set qos enable | disable Syntax Descript ion Defaults The default is QoS functionalit y is disable ...

  • Cisco Systems 6500 - page 522

    2-473 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set q os a c l d efa ult- a cti on set qos acl defau lt-action T o set t he ACL default actions, use the set qos acl default-action command. set qos acl default-action ip {{ dscp dscp } | trust-cos | trus ...

  • Cisco Systems 6500 - page 523

    2-474 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos acl default-action Console> (enable) ...

  • Cisco Systems 6500 - page 524

    2-475 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set q os a c l d efa ult- a cti on This exampl e shows ho w t o set up the IPX AC L defaul t actions : Console> (enable) set qos acl default-action ipx dscp 5 microflow micro aggregate agg QoS default- ...

  • Cisco Systems 6500 - page 525

    2-476 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos acl ip set qos acl ip T o cre ate or add IP a ccess lists , use the set qos acl ip comm and. set qos acl ip { acl_ name } {{ dscp ds cp } | t rust-c os | trust- ipprec | trust-dscp } [ microf ...

  • Cisco Systems 6500 - page 526

    2-477 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set qo s acl ip Defaults The def ault is there ar e no A CLs. Comma nd T ypes Swit ch co mman d. Command Mode s Pri vile ged. Usage Guid el i nes Configurations yo u make by entering any of these c ommand ...

  • Cisco Systems 6500 - page 527

    2-478 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos acl ip The optio nal micr oflow micr ofl ow _na me an d aggrega te aggr egate_name key words and v ariables are used to c o nf igure polici ng i n the A CE. Refer to the Ca talyst 650 0 Serie ...

  • Cisco Systems 6500 - page 528

    2-479 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set qo s acl ip If the oper ator is positioned after th e sourc e and sour ce-wildcard, it must match the source po rt. If the operator is positioned after the destination an d destination- wildca rd, it ...

  • Cisco Systems 6500 - page 529

    2-480 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos acl ip This example shows ho w to de fine an ICMP access li st: Console> (enable) set qos acl ip icmp_acl trust-dscp my-micro icmp 1.2.3.4 255.255.0.0 172.20.20.1 255.255.255.0 precedence ...

  • Cisco Systems 6500 - page 530

    2-481 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set qo s acl ipx set qos acl ipx T o defin e IPX access lists, use the set qos acl ipx command. set qos acl ipx { acl _name } { dscp dsc p | tru st-cos } [ aggregate aggr egate_name ] { p r otocol } { sr ...

  • Cisco Systems 6500 - page 531

    2-482 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos acl ipx The optio nal aggregate aggr e ga te_name keyword and variable are use d to configure policing i n the A CE. Refer to the Catalyst 6500 Series Swi tch Software Co nfigur a tion Guide ...

  • Cisco Systems 6500 - page 532

    2-483 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set qo s acl ipx Exam ples Th is exam pl e s h ows how to cr ea t e an I P X A CE: Console> (enable) set qos acl ipx my_IPXacl trust-cos aggregate my-agg -1 my_IPXacl editbuffer modified. Use `commit&a ...

  • Cisco Systems 6500 - page 533

    2-484 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos acl mac set qos acl mac T o define MAC access lists, use the se t qos acl mac comman d. set qos acl mac { ac l_name } { dscp dscp | trust- cos } [ aggregate aggr egate_name ] { src_mac_addr _ ...

  • Cisco Systems 6500 - page 534

    2-485 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set qo s acl mac • Case sensiti ve • Cannot be a num be r • Must n ot be a keyword; keywords to avoid are al l, de fault-a ction , map, hel p, a nd edi tbuffer The src_mac_addr_sp ec is a 48-bi t so ...

  • Cisco Systems 6500 - page 535

    2-486 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos acl map set qos acl map T o attach an A CL to a specified port o r VLAN, use the set qos ac l map comman d. set qos acl map acl_na me { mo d/port | vl an } [ input ] Syntax Descript ion Defau ...

  • Cisco Systems 6500 - page 536

    2-487 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set qo s acl map Commit ACL new_acl before mapping. Console> (enable) This e xample sho ws how to attach an A CL named “test” to the VLAN 1 ingress interf ace: Console> (enable) set qos acl map ...

  • Cisco Systems 6500 - page 537

    2-488 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos autoqos set qos autoqos T o apply automat ic QoS settings to all ports on the switch , use the set qos autoqos command. set qos a utoqos Syntax Descript ion This c omm and ha s no a rgume nts ...

  • Cisco Systems 6500 - page 538

    2-489 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set q os b r id ged -m ic rof low- pol icin g set qos bridged-microflow-polic ing T o enable or disabl e microf low policing of bridge d packets on a per-VLAN ba sis, use the set qos bridged-micr oflow-po ...

  • Cisco Systems 6500 - page 539

    2-490 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos cos- dscp-map set qos cos-dsc p-map To set the CoS-to-DSCP mapping, use th e set qos cos-dscp-ma p command. set qos cos- dscp-map dsc p1 dscp2... d scp 8 Syntax Descript ion Defaults The def ...

  • Cisco Systems 6500 - page 540

    2-491 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set qos drop- thres hol d set qos drop-threshold T o p rogram t he tr ansmi t-queu e an d rece iv e-queue dr op thre sholds on all ports in the system, use t he set qos drop-thr eshold command. set qos dr ...

  • Cisco Systems 6500 - page 541

    2-492 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qo s drop-thr eshold The number pr eceding the q letter in the port type dete rmines the number of t he queues that the har dware supports. For exampl e, wi th 2q2 t , the number of queues specif ...

  • Cisco Systems 6500 - page 542

    2-493 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set qos ds cp-cos- m ap set qos dscp-c os-map To set the DSCP-to-CoS mapping, use the set qos dscp-cos-map command . set qos dscp -cos- map dscp_list:cos_ value ... Syntax D escr i pti on Defaults The def ...

  • Cisco Systems 6500 - page 543

    2-494 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos dscp-m utatio n-table-map set qos dscp-mutat ion-table-map T o conf ig ure the DSCP mutation table map, use the set qos dsc p-mutation-table-map co mman d. set qos dscp-mutation-table-map mut ...

  • Cisco Systems 6500 - page 544

    2-495 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set qos ip prec-ds cp-map set qos ipprec -dscp-map T o set t he IP prece dence-to-DSC P map, use the set qos ipprec-dscp-map co mmand. This comma nd applies to all pack ets and all ports. set qos ipprec - ...

  • Cisco Systems 6500 - page 545

    2-496 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qo s ipp rec -d sc p- ma p Exam ples Th is exampl e sh ows how to assign I P pr ece de nce- to-D SCP mappi ng a nd r etur n to the d efault : Console> (enable) set qos ipprec-dscp-map 20 30 1 ...

  • Cisco Systems 6500 - page 546

    2-497 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set qo s mac-co s set qos mac-c os T o set the C oS value to the M A C ad dres s and VL AN pa ir, use the set qos mac-cos co mman d. set qos mac- cos dest _mac vlan cos Syntax D escr i pti on Defaults Thi ...

  • Cisco Systems 6500 - page 547

    2-498 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos map set qos map T o map a specif ic CoS value to the transmit- or r ecei ve-pri o rity queues an d the thresholds per a vail a ble priority queue for all ports , use the set qos map comma nd. ...

  • Cisco Systems 6500 - page 548

    2-499 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set qo s map Comma nd T ypes Swit ch co mman d. Command Mode s Pri vile ged. Usage Guid el i nes If you ent er the se t qos map port _type tx | rx q# cos coslist comm and, the follo wing is a list of p os ...

  • Cisco Systems 6500 - page 549

    2-500 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos map This example shows ho w to ma p the CoS value 5 to strict-p riority tra nsmit- queue 3/dro p-thres hold 1: Console> (enable) set qos map 1p2q2t tx 3 1 cos 5 Qos tx strict queue and thr ...

  • Cisco Systems 6500 - page 550

    2-501 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set qos poli ce d-dscp -m ap set qos policed -dscp-map T o set the m apping of p oliced in -profile DSCPs , use the set qos policed-dscp-map command. set qos policed-dscp-map [ normal-rat e | excess-rate ...

  • Cisco Systems 6500 - page 551

    2-502 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos policer set qos policer T o c r eat e a po li ci ng rule f or ACL, us e t he set qos policer comm and. set qos policer { microflow micr oflow_ name } { rate rate } { bu rst burs t } { drop | ...

  • Cisco Systems 6500 - page 552

    2-503 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set qo s polic er The exc ess rate must be greater than or equal to the norma l rate. The set qos po licer ag gregate command allo ws you to conf igure an aggre gate flo w and a policing ru le for that ag ...

  • Cisco Systems 6500 - page 553

    2-504 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qo s policy-s ource set qos policy-source T o set t he QoS polic y source, use th e set qos policy-source com mand. set qos policy- source local | cops Syntax Descript ion Defaults The def ault i ...

  • Cisco Systems 6500 - page 554

    2-505 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set qos po lic y-sou rce This example shows the output i f you attempt to set the policy source to COPS-PR and no COPS-PR serv ers are a vai lable: Console> (enable) set qos policy-source cops QoS poli ...

  • Cisco Systems 6500 - page 555

    2-506 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos rsvp set qos rsvp T o turn on or turn of f the RSVP feature on the switch, to set the time in minut es after which the RSVP databases get flushed (when the p olicy serv er dies), and to se t ...

  • Cisco Systems 6500 - page 556

    2-507 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set qo s rsvp This e xample shows how to set t h e polic y timeout interv al: Console> (enable) set qos rsvp policy-timeout 45 RSVP database policy timeout set to 45 minutes. Console> (enable) This ...

  • Cisco Systems 6500 - page 557

    2-508 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos rxq- ratio set qos rxq-ratio T o set the amount of pa cket b uffer m emory allocated to high-priori ty incoming traf fic and lo w-priority incomin g traf fic, use the set qos rxq-ratio comman ...

  • Cisco Systems 6500 - page 558

    2-509 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set qos rxq-ra tio Exam ples This e xample s ho ws ho w to set t he receive- queue s ize rati o: Console> (enable) set qos rxq-ratio 1p1q0t 80 20 QoS rxq-ratio is set successfully. Console> (enable) ...

  • Cisco Systems 6500 - page 559

    2-510 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos statistics export set qos statistics ex port T o globally enable or disable statistics dat a gathering from hardw are, use the set qos statistics export comm and. set qos statist ics export { ...

  • Cisco Systems 6500 - page 560

    2-511 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set qos sta ti st ic s expor t agg regate set qos statistics ex port aggreg ate T o enable or disable statis tics data export on an aggre gate policer , us e t he set qos statistics exp ort aggregate comm ...

  • Cisco Systems 6500 - page 561

    2-512 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos statistics export destinat ion set qos statistics ex port destinatio n T o specify the statisti cs data export dest ination address, use the set qos statistics export destinatio n comm and. s ...

  • Cisco Systems 6500 - page 562

    2-513 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set q os sta ti st ics e x por t in te rva l set qos statistics export interval T o specify ho w often a p ort or aggre gate policer statistics data is read and e xported, u se t h e set qo s statistics e ...

  • Cisco Systems 6500 - page 563

    2-514 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos stati stics export port set qos statistics ex port port T o enable or disa ble statist ics data e xport on a por t, u s e th e set qos stat istics export po rt comman d. set qos statist ics e ...

  • Cisco Systems 6500 - page 564

    2-515 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set qo s txq-rati o set qos txq-ratio T o set the amount of pack et b uf fer memory allocat ed to high-p riority tra f f ic and lo w-priority traf fic , use the set qos txq-ra tio comma nd. set qos t xq-r ...

  • Cisco Systems 6500 - page 565

    2-516 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos txq-ratio Exam ples Th is e xample shows ho w to set the transmit-queue size ratio: Console> (enable) set qos txq-ratio 2q2t 75 25 QoS txq-ratio is set successfully. Console> (enable) R ...

  • Cisco Systems 6500 - page 566

    2-517 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set qo s wred set qos wred T o conf igure the W RED thre shold pa rameters fo r the specif ied por t type, us e the set qos wred comm and. set qos wred port_ type [ tx ] queue q# {[ thr1 Lo :] thr1Hi } {[ ...

  • Cisco Systems 6500 - page 567

    2-518 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos wred Relat e d Commands clear qos co nf ig show qos inf o ...

  • Cisco Systems 6500 - page 568

    2-519 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set qo s wrr set qos wrr To specify the weights th at d etermine ho w many pa ckets will transmit out of one queue before switchin g to the othe r queue, use the set qos wr r comm and. set qos wrr por t_t ...

  • Cisco Systems 6500 - page 569

    2-520 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos wrr Exam ples Th is example shows how to specify the weights for queue 1 and queue 2 to 30 and 70: Console> (enable) set qos wrr 2q2t 30 70 QoS wrr ratio is set successfully. Console> ( ...

  • Cisco Systems 6500 - page 570

    2-521 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set radius attribute set radius attribute T o set attrib utes to the RADIUS A CCESS_REQUEST pack et, use the set radius attribute comman d. set radius attribute { number | name } in clude-in-access-r eq { ...

  • Cisco Systems 6500 - page 571

    2-522 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set radi us deadti me set radius dea dtime T o set the time to skip RADIUS serv er s that do not re ply to an au thentic ation request , use th e set radius deadtime comman d. set radius deadtime min ...

  • Cisco Systems 6500 - page 572

    2-523 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set radius key set radius key T o set the encryptio n and authenticatio n for all communi cation betwee n the RADIUS client and the serv er, use the set radius key com mand. set radius key ke y Syntax D e ...

  • Cisco Systems 6500 - page 573

    2-524 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set ra dius retrans mit set radius retransmit T o speci fy the numbe r of tim es the RA DI US servers are trie d be fore giving up on the server , use the set radius retransmit com mand. set radius r ...

  • Cisco Systems 6500 - page 574

    2-525 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set radius server set radius server T o set up the RA DIU S server, use the set radius ser ver command. set r adi us s erver i paddr [ a uth- port port ] [ ac ct-port po rt ] [ primary ] Syntax D escr i p ...

  • Cisco Systems 6500 - page 575

    2-526 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set ra dius time out set radius timeout T o set the time between retransm issions to the RADIUS server , use the set radius timeout comman d. set radi us tim eou t secon ds Syntax Descript ion Defaul ...

  • Cisco Systems 6500 - page 576

    2-527 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set rcp usern ame set rcp username To sp eci fy you r userna m e for r cp f ile tr ans fers, use th e s et rcp usern ame command. set rcp u sernam e userna me Syntax D escr i pti on Defaults There are no ...

  • Cisco Systems 6500 - page 577

    Chapter 2 Ca talyst 6 500 Series Swi tch and ROM M onitor Comm ands set rgmp 2-528 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 22 set rgmp T o enab le or dis able the Route r-Por ts Group Ma nage ment Pr otocol (RG MP) fe atur e on the swi tch, us e the set r gmp command. set rgmp { ena ble | disable } Syntax Descript ...

  • Cisco Systems 6500 - page 578

    2-529 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set rspan set rspan T o create re mote Switched Port An alyzer ( SP AN) sessions, use the set rspan comm and. set rspan disable source [ rspan_vlan | all ] set rpsan disable destination [ mod/po rt | all ...

  • Cisco Systems 6500 - page 579

    2-530 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set r spa n Defaults The de faults are as fo llows: • Remote SP AN is disabled. • No VLAN f ilterin g. • Monitoring multic ast tr aff ic is enabled. • Learni n g i s en ab led. • inpkts is ...

  • Cisco Systems 6500 - page 580

    2-531 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set rspan Exam ples Th is exampl e sh ows how to disab le al l en able d sour ce s ession s: Console> (enable) set rspan disable source all This command will disable all remote span source session(s). ...

  • Cisco Systems 6500 - page 581

    2-532 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set secur ity acl adj acency set security acl adjac ency T o set an entr y for th e adjac ency ta ble, u se the set securi ty acl adjacency command. set sec urit y a cl ad ja cenc y adjacenc y_name d ...

  • Cisco Systems 6500 - page 582

    2-533 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set sec urity a cl a rp-inspec tion set security acl arp -inspecti on T o configure Ad dress Res olution Proto col (ARP) inspection fe ature s, use the set se curity acl arp-inspection comman d. set secur ...

  • Cisco Systems 6500 - page 583

    2-534 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set security acl arp-inspection Use the set se curity acl arp-inspectio n command in conjun ction w ith the set security acl ip arp-inspection command . For more info rmation about configuring ARP in ...

  • Cisco Systems 6500 - page 584

    2-535 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set sec urity a cl c apture-por ts set security acl capt ure-po rts T o set the ports (specif ied with the captur e option in the set security acl ip , set security acl ipx , and set security a cl mac co ...

  • Cisco Systems 6500 - page 585

    2-536 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set security acl feature ratelimit set security acl featu re ratelimit T o specif y a rate limit for the number of pac kets t hat are sen t to the CPU on a global b asis, use the set security acl fea ...

  • Cisco Systems 6500 - page 586

    2-537 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set secu r it y acl ip set security acl ip T o c reate a n ew en try i n a stan dard IP VA CL a nd ap pend th e ne w en try at th e end of t he VA CL, u se the set security a cl ip command. set security a ...

  • Cisco Systems 6500 - page 587

    2-538 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set security acl ip mod if y editbu ffer_ index (Optional ) Replace s an A CE with the new A C E. log ( O pt i on a l ) Logs denied packets. arp Specif ies ARP . redirect Specifies to wh ich swit che ...

  • Cisco Systems 6500 - page 588

    2-539 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set secu r it y acl ip Defaults Ther e are no def ault ACLs an d no defa ult ACL-V LAN ma ppings. By de fault, AR P is enabled. Comma nd T ypes Swit ch co mman d. Command Mode s Pri vile ged. Usage Guid e ...

  • Cisco Systems 6500 - page 589

    2-540 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set security acl ip • Use the ke yword any as an abbrev iation for a sour ce and sour ce-wil dcar d of 0.0. 0.0 255.2 55.255.25 5. • Use host /sourc e as an a bbreviation for a destination and de ...

  • Cisco Systems 6500 - page 590

    2-541 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set secu r it y acl ip For IP , you ca n enter the fo llowing synt ax: set security a cl ip { acl_name } { permit | deny | redi re c t { mod_nu m/port _num }} [ ip ] { src_ip_spec } { dest _ip_s pec } [ p ...

  • Cisco Systems 6500 - page 591

    2-542 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set security acl ip Relat e d Commands clea r security acl clear secur ity acl captur e-ports clear s ecurity ac l map commit set security a cl map set secur ity acl captur e-ports show security acl ...

  • Cisco Systems 6500 - page 592

    2-543 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set secu r it y acl ipx set security acl ipx T o cr ea te a new entry in a stan dard IPX V A CL an d t o appe nd t he new entry at the end of the V A CL , use the set security acl ipx command . set securi ...

  • Cisco Systems 6500 - page 593

    2-544 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set security acl ipx If you use the capture keyword, the ports that captu re the traf fic and t ransmit out are spe cified by ent erin g th e set se c uri t y a cl ca ptu r e-p or ts co mmand . When ...

  • Cisco Systems 6500 - page 594

    2-545 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set secu r it y acl ipx Exam ples Th is exampl e sh ows how to bloc k tr aff ic f rom a specified sou rc e IPX addre ss: Console> (enable) set security acl ipx IPXACL1 deny 1.a IPXACL1 editbuffer modif ...

  • Cisco Systems 6500 - page 595

    2-546 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set security acl log set security acl log T o c on figure th e s ecur i ty ACL log tab l e, us e th e set secur ity acl log comman d. set secu rit y a cl l og maxfl ow max_flows set se c uri t y a cl ...

  • Cisco Systems 6500 - page 596

    2-547 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set secu r it y acl log This exampl e shows ho w to disabl e rate lim iting: Console> (enable) set security acl log rate-limit 0 CAUTION: Rate limit for logging eligible packet is disabled. 2003 Apr 07 ...

  • Cisco Systems 6500 - page 597

    2-548 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set security acl mac set security acl mac T o cr eat e a new entry in a non- IP or non- IPX pro to col V A CL an d to app en d t he new entr y at th e end of the V A CL, use the set security acl mac ...

  • Cisco Systems 6500 - page 598

    2-549 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set secu r i t y acl mac • Cannot be a num be r • Must n ot be a keyword; keywords to avoid are al l, de fault-a ction , map, hel p, a nd edi tbuffer The src_mac_addr_sp ec is a 48-bi t source MA C ad ...

  • Cisco Systems 6500 - page 599

    2-550 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set security acl map set security acl map T o map an exi sting V A CL to a VLAN, use the set security ac l map comm and. set security a cl map acl_ name vlan Syntax Descript ion Defaults Ther e are n ...

  • Cisco Systems 6500 - page 600

    2-551 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set secu r i t y acl map This e xampl e sho ws t he outpu t if you tr y to map an A C L that is a lready map ped to a VLAN for th e A CL type (IP , IPX, or MAC): Console> (enable) set security acl map ...

  • Cisco Systems 6500 - page 601

    2-552 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set snmp set snmp T o enable or disable the processing of SNMP requests to the switch and SNMP traps from the switch, use the set snmp comm and. set snmp { en ab le | disable } Syntax Descript ion De ...

  • Cisco Systems 6500 - page 602

    2-553 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set sn mp access set snmp access T o d efine th e acc ess ri ght s of an SN MP grou p, u se the set snmp access command. set snmp acc ess [ -hex ] { groupname } { sec urit y-mo del { v1 | v2c }} [ rea d [ ...

  • Cisco Systems 6500 - page 603

    2-554 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set snmp access • write write view is NULL OI D. • notify notifyvie w is NULL OID. • cont ext contextname is a NULL string. Comma nd T ypes Swit ch co mman d. Command Mode s Pri vile ged. Usage ...

  • Cisco Systems 6500 - page 604

    2-555 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set sn mp access- list set snmp access-list T o specify an access lis t number fo r a host or group of host s, use the set snmp access-list command. set snmp acc ess-list a ccess_numb er IP_address [ ipma ...

  • Cisco Systems 6500 - page 605

    2-556 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set snmp ac cess-list Relat e d Commands clear sn mp access-lis t show snmp access-list ...

  • Cisco Systems 6500 - page 606

    2-557 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set sn mp buffer set snmp buffer T o set t he size of the SNM P UDP socket recei ve b uf fer , use t h e set snmp buffer command. set snmp buffer { pac kets } Syntax D escr i pti on Defaults 95 pack ets. ...

  • Cisco Systems 6500 - page 607

    2-558 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set snmp chassis-a lias set snmp chassis-alias T o set t he chassis al ias and sav e it in NVRAM an d in the c o nfi guration fi le, use the set snmp chassis-alias command. set snmp chassis-a lias [ ...

  • Cisco Systems 6500 - page 608

    2-559 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set snmp communi ty set snmp community T o set SNMP comm unities and asso ciated acce ss types, us e the set snmp community comman d. set snmp community { rea d - on l y | read-wr ite | read-wr ite-all } ...

  • Cisco Systems 6500 - page 609

    2-560 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set snmp comm unity There are three co nf igurab le SNMP communi ties, one fo r each acce ss type. If you do not specify the comm unity stri ng, the co mmunit y string configur ed for tha t acces s t ...

  • Cisco Systems 6500 - page 610

    2-561 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set snmp community-ext set snmp community-ext T o set ad d itional c o mmunity str ings, use the set snmp c ommunity-ext command. set snmp community- ext community_string { rea d- o n l y | re a d - w ri ...

  • Cisco Systems 6500 - page 611

    2-562 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set snmp com munity-ext This e xample sho ws how to change the access num b er to the commu nity str ing: Console> (enable) set snmp community-ext private1 read-write access 3 Community string pri ...

  • Cisco Systems 6500 - page 612

    2-563 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set snmp ext endedrmo n netflow set snmp exten dedrmon netfl ow T o enabl e or disab le the SNMP extend ed RMON support for t he N A M module , use the set snmp extendedrmon netflow com m and. set snmp ex ...

  • Cisco Systems 6500 - page 613

    2-564 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set snmp group set snmp group T o establi s h th e r elat i ons h ip bet ween an SNMP g rou p an d a us e r with a sp ecif ic security mo del, use th e set snmp group command. set snmp group [ -he x ...

  • Cisco Systems 6500 - page 614

    2-565 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set sn mp ifalias set snmp ifalias T o set t he SNMP inte r face alias, u se the set snmp ifalias co mman d. set snmp ifalias { ifIndex } [ ifAlias ] Syntax D escr i pti on Defaults Thi s command has no d ...

  • Cisco Systems 6500 - page 615

    2-566 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set snmp notify set snmp notify T o set t he notifynam e entry in the snmp NotifyT able and the n otifytag en try in the snmp T argetAdd rT abl e, u s e the se t snmp notify command. set snmp not ify ...

  • Cisco Systems 6500 - page 616

    2-567 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set sn mp rmon set snmp rmon T o ena ble or disab le SNMP RM ON support, use the se t snmp rmon comma nd. set snmp rm on { enable | disable } Syntax D escr i pti on Defaults The default is RMON suppor t i ...

  • Cisco Systems 6500 - page 617

    2-568 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set s nm p rm on me mo ry set snmp rmonme mory T o set t he memory usage limit in pe rcentage, use th e set snmp rmonmemory command. set snmp rmonmemory per centage Syntax Descript ion Defaults The d ...

  • Cisco Systems 6500 - page 618

    2-569 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set snmp targ etadd r set snmp t argetadd r T o conf igure the SNMP tar get address en tries in the snm pT arg etAddres sT able, use the set snmp targetaddr co mmand . set snmp ta rgetaddr [ -he x ] { add ...

  • Cisco Systems 6500 - page 619

    2-570 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set snmp targetad dr Usage Guid el i nes If you us e speci al char act ers for the addrname, paramsn ame, tag, and tagv al ue (nonprintab le delim iters for th ese p aram ete rs), you m ust u se a he ...

  • Cisco Systems 6500 - page 620

    2-571 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set snmp targ etpara ms set snmp targ etparams T o conf ig ure the SNMP parameters us ed in the snmpT argetP aramsT able when generatin g a message to a target, use th e set s nm p ta rget par ams co mman ...

  • Cisco Systems 6500 - page 621

    2-572 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set sn mp target para ms Usage Guid el i nes If you use sp ecial char acters for the paramsname and username (no npri ntable delim iters fo r these paramet ers), yo u must use a hexadeci mal keyword, ...

  • Cisco Systems 6500 - page 622

    2-573 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set sn mp tra p set snmp trap T o enable or disable the diffe rent SNMP traps on the system or to add an entry into the SNMP authenti cation trap recei ver ta ble, use t h e set snmp trap command. set snm ...

  • Cisco Systems 6500 - page 623

    2-574 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set snmp trap Defaults The def a ult is SNM P traps are disabled. Comma nd T ypes Swit ch co mman d. Command Mode s Pri vile ged. Usage Guid el i nes This c omm and is not sup port ed by t he NAM. An ...

  • Cisco Systems 6500 - page 624

    2-575 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set sn mp tra p Console> (enable) Relat e d Commands clear sn mp trap set port t rap show snmp test snmp trap ...

  • Cisco Systems 6500 - page 625

    2-576 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set snmp user set snmp user T o conf igure a new SNM P user , use the se t snmp user co mmand. set snmp user [ -hex ] { usernam e } { rem o t e { engine id }} [ au thenti catio n { md5 | sha | authpa ...

  • Cisco Systems 6500 - page 626

    2-577 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set sn mp user This e xample shows how to se t a specif ic username, authentication, and authpassword: Console> (enable) set snmp user John authentication md5 arizona2 Snmp user was set to John authPro ...

  • Cisco Systems 6500 - page 627

    2-578 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set snmp view set snmp view T o conf igure the SNMP MIB v ie w , use th e set snmp view command . set snmp view [ -hex ]{ viewname }{ subtr ee }[ mas k ] [ included | excl uded ] [ volatile | nonvola ...

  • Cisco Systems 6500 - page 628

    2-579 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set sn mp view Exam ples Th is exampl e sh ows how to assign a su bt ree to the view pu blic: Console> (enable) set snmp view public 1.3.6.1 included Snmp view name was set to public with subtree 1.3.6 ...

  • Cisco Systems 6500 - page 629

    2-580 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set span set span T o enable or disa ble SP AN and to set up the switch por t and VLAN analyzer for mu ltiple SP AN sessions, use the set span command. set span disable [ dest_m od/dest_p ort | all ] ...

  • Cisco Systems 6500 - page 630

    2-581 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set sp an Usage Guid el i nes After y ou en ab le SP AN , syst em d efault s a re u sed i f no pa rame t ers w e re ever set. I f y ou ch an ge d parame ters, t he old parame ters ar e stored i n NVRAM , ...

  • Cisco Systems 6500 - page 631

    2-582 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set span This example shows how to disable SP AN if mu ltiple SP AN sessio ns are not defined: Console> (enable) set span disable This command WILL disable your span session(s). Do you want to con ...

  • Cisco Systems 6500 - page 632

    2-583 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set spantr ee backb onefast set spantree backbone fast T o en able or disa ble t he span ning t ree Back boneF ast C on ver gence f eature, use the se t spantr ee backbonefast comman d. set spantr ee back ...

  • Cisco Systems 6500 - page 633

    2-584 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spantree bpdu-filter set spantree bpdu-filter T o enable or disable BPDU packet f iltering o n a port, use the set spantree bpdu- f ilter comman d. set spantr ee bpdu-fil ter mod/port { enable | ...

  • Cisco Systems 6500 - page 634

    2-585 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set spantr ee bpdu-g uard set spantree bpdu-guard T o ena ble or di sabl e spanning tree BPD U guar d on a po rt, us e the set spantree bpdu-guard comm and. set spantr ee bpdu-guard mod/ port { ena ble | ...

  • Cisco Systems 6500 - page 635

    2-586 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spa ntree bpdu- skewing set spantree bpdu-skewin g T o en able or disable collection of the s panni ng tre e BPDU s ke wing de tection statistics, use the set spantree bpdu-skew ing command. set ...

  • Cisco Systems 6500 - page 636

    2-587 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set spantr ee chann elcost set spantree channelco st T o set t he channel path cost an d to au tomatically adjust the c h annel p ort costs, u se the set spantree channelcost command . set spant ree chann ...

  • Cisco Systems 6500 - page 637

    2-588 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set s pan tre e cha nne lco st Relat e d Commands clear la cp-channel stati stics set channelpr otocol set lacp-channel sy stem-pr iority set port lacp-channel set spant ree cha nnelcost set spant re ...

  • Cisco Systems 6500 - page 638

    2-589 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set spa ntr ee chann elvlanco st set spantree channelvla ncost T o set the channel VLAN path cost an d adjust the port VLAN costs of the por ts that belong to the chan ne l, u se th e set spant re e chann ...

  • Cisco Systems 6500 - page 639

    2-590 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spantree defaultcostmode set spantree defaultcostmode T o s peci fy t he s p anni ng tre e de fau lt por t cost mode , use th e set spa n tree defau lt costm ode com ma nd . set span tree de faul ...

  • Cisco Systems 6500 - page 640

    2-591 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set spantr ee defau lt cos tmode Exam ples Th is exampl e sh ows how to set th e spanni ng tr ee d efaul t po rt cost mod e: Console> (enable) set spantree defaultcostmode long Portcost and portvlancos ...

  • Cisco Systems 6500 - page 641

    2-592 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spant ree disable set spantree disable T o disabl e the spanni ng tree algorithm for all VLANs or a specif ic VLAN or disable sp anning t ree inst an ce , us e th e set spa ntree disable command. ...

  • Cisco Systems 6500 - page 642

    2-593 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set spa ntree disa ble This e xample sho ws ho w to disable spanning tree fo r a specif ic instance: Console> (enable) set spantree disable mistp-instance 2 MI-STP instance 2 disabled. Console> (ena ...

  • Cisco Systems 6500 - page 643

    2-594 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spantr ee enable set spantree enabl e T o enable the span ning tree algorithm for all VLANs, a spe cif ic VLAN, a specifi c instance, or al l inst an ce s, use th e set spantr ee enable command. ...

  • Cisco Systems 6500 - page 644

    2-595 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set spantr ee enabl e Relat e d Commands set spantree disable show spantr ee ...

  • Cisco Systems 6500 - page 645

    2-596 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spantree fwddelay set spantree fwddelay T o set the bridge forw ard delay for a VLAN or an instance, use the set spantree fwddelay command . set span tree fwdd el ay de lay [ vlans ] set span tre ...

  • Cisco Systems 6500 - page 646

    2-597 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set spantr ee fwddel ay This e xample shows ho w to set the bridge for ward delay for the IST and all MST instance s to 15 seconds: Console> (enable) set spantree fwddelay 15 mst MST forward delay set ...

  • Cisco Systems 6500 - page 647

    2-598 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spantr ee global -default set spantree globa l-default T o s et th e gl ob al s ta tes on th e sw it ch, use th e set spa ntree globa l-def ault command. set sp antr ee glob al-defa ult portfa st ...

  • Cisco Systems 6500 - page 648

    2-599 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set spantr ee globa l-d efault This exampl e shows ho w t o disable th e global BPDU filter state on the switch: Console> (enable) set spantree global-default bpdu-filter disable Spantree global-defaul ...

  • Cisco Systems 6500 - page 649

    2-600 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spantree guard set spantree guard T o enabl e or disab le the spa nning tr ee roo t guard or loop gua rd feat ure on a per-port basis, use t he set spantree guar d command. set spantree gua rd { ...

  • Cisco Systems 6500 - page 650

    2-601 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set spantr ee guard Exam ples Th is exampl e sh ows how to ena ble root gua rd : Console> (enable) set spantree guard root 5/1 Rootguard on port 5/1 is enabled. Warning!! Enabling rootguard may result ...

  • Cisco Systems 6500 - page 651

    2-602 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spantree hello set spantree hello T o set the bridge hello time for a VLAN or an instance, use the set spantree hello command. set spantree hello interval [ vlans ] set spantree hello interval mi ...

  • Cisco Systems 6500 - page 652

    2-603 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set s pan tr ee h e llo This example sho ws how to set the spantree hello time for an instance to 3 seconds: Console> (enable) set spantree hello 3 mistp-instance 1 Spantree 1 hello time set to 3 secon ...

  • Cisco Systems 6500 - page 653

    2-604 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spantree link-type set spantree link-type T o conf ig ure the link type of a port , use the set spantr ee link-type command . set span tree lin k-ty pe mod/po rt { auto | poin t-to -point | share ...

  • Cisco Systems 6500 - page 654

    2-605 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set spantr ee macred uction set spantree macreduction T o enable or disable the span ning tre e MA C address re duction fe ature, use the set spantree macr eduction comman d. set spantr ee macreduc tion e ...

  • Cisco Systems 6500 - page 655

    2-606 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spantree maxa ge set spantree maxage T o set the bridge max imum aging time for a VLAN or an instance , u se the set spantree maxage comm and. set spantree max age agi ngtime [ vlan s ] set spant ...

  • Cisco Systems 6500 - page 656

    2-607 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set spantr ee maxage This exampl e shows ho w to set the ma ximum ag ing time fo r an insta nce to 25 sec onds: Console> (enable) set spantree maxage 25 mistp-instance 1 Instance 1 max aging time set t ...

  • Cisco Systems 6500 - page 657

    2-608 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set s pantree mode set spantree mode T o configure the type of Span ning T ree Pro tocol mo de to run, use the set spantree mode command. set spantree mode { mistp | pvst+ | mistp-pvst+ | mst | rapid ...

  • Cisco Systems 6500 - page 658

    2-609 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set sp antree m ode If yo u ch a n g e the sp ann ing tree mode from PVST + to MISTP or M I S T P t o P V S T + , the STP mode previously running stops, all the in for m ation co llected at runtime is use ...

  • Cisco Systems 6500 - page 659

    2-610 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spantree m st set spantree mst T o conf ig ure the mapping of VLANs to an MST instance , use the set spantree mst command. set spantree mst instance vlan vlan Syntax Descript ion Defaults Thi s c ...

  • Cisco Systems 6500 - page 660

    2-611 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set spantr ee mst co nfi g set spantree mst config T o change the MST regio n informatio n, use the set spantree mst conf ig comman d. set spant ree mst co nfig [ name name ] [ revision numbe r ] set span ...

  • Cisco Systems 6500 - page 661

    2-612 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spantree mst config Exam ples Th is example shows ho w t o configure an M ST region an d to giv e that region a na me and revision number: Console> (enable) set spantree mst config name test-l ...

  • Cisco Systems 6500 - page 662

    2-613 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set s pan tr ee m st li n k -ty pe set spantree mst link-type T o conf ig ure the link type of a port , use the set spantree mst link-type co mmand . set span tree mst li nk-ty pe mod/po rt { auto | p oin ...

  • Cisco Systems 6500 - page 663

    2-614 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spantree mst m axhops set spantree mst maxhops T o s et th e spa nni ng tr ee h op co unt , us e t he set spantree mst ma xhops co mman d. set spantree mst max hops ma xhops Syntax Descript ion D ...

  • Cisco Systems 6500 - page 664

    2-615 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set s pan tr ee m st v lan set spantree mst vlan T o conf ig ure the mapping of VLANs to an MST instance , use the set spantree mst v lan command . set spantree mst instance vlan vlan Syntax D escr i pti ...

  • Cisco Systems 6500 - page 665

    2-616 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set sp ant ree po rt cost set spant ree port cost T o set the path cost for a por t, use the set span tree port cos t comma nd. set spant ree po rtcost mod/port co st [ mst ] Syntax Descript ion Defa ...

  • Cisco Systems 6500 - page 666

    2-617 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set sp antree p ortco st Comma nd T ypes Swit ch co mman d. Command Mode s Pri vile ged. Usage Guid el i nes If the sp anning t ree mo de i s shor t and l ong or M IST P , valid cost values are f rom 1 t ...

  • Cisco Systems 6500 - page 667

    2-618 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spantree portfast set spantree port fast T o allo w a p ort that is connected to a single wo rkstation or PC to start faster when it is connected, use the set spantree portfast command. set spant ...

  • Cisco Systems 6500 - page 668

    2-619 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set spantr ee portfas t bpdu-fi lt er set spantree portfast bp du-filter T o ena ble o r di sab le spanni ng tree Po rtFast BPDU packe t filtering on a p ort, use the se t s pantree portfast bpdu-f ilter ...

  • Cisco Systems 6500 - page 669

    2-620 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set span tree portfa st bpdu-guard set spantree portfast bp du-guard T o ena ble o r di sab le spanni ng tree Po rtFast BPDU guard o n a por t, u se the se t spantree port fast bpdu-guard comman d. s ...

  • Cisco Systems 6500 - page 670

    2-621 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set spantr ee portins tancecos t set spantree port instanceco st T o assign the pa th cost of the port for the specif ied instan ces, use the set spantree portinstancecost comm and. set spantr ee portinst ...

  • Cisco Systems 6500 - page 671

    2-622 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set span tree porti nstancecost Exam ples Th ese exampl es show how to use th e set spantree portinstancecost command and explic itly specify the path cost of a port : Console> (enable) set spantr ...

  • Cisco Systems 6500 - page 672

    2-623 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set spantr ee portins tancepri set spantree portinstan cepri T o set the p ort prior ity for inst ances in th e trunk p ort, use th e set spantree portinstancepri comman d. set spant ree port instancepri ...

  • Cisco Systems 6500 - page 673

    2-624 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spantree portinstancepri This exampl e shows ho w to set the por t priori ty for mod ule 8, port 1, on MST inst ance 2 : Console> (enable) set spantree portinstancepri 8/1 31 mst 2 Port 8/1 in ...

  • Cisco Systems 6500 - page 674

    2-625 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set spantr ee portp ri set spant ree port pri T o s et the brid ge pr iori ty for a s pa nning t ree po rt, use t h e set spantree portpri command . set spant ree po rtpri mod/port priority [ mst ] Syntax ...

  • Cisco Systems 6500 - page 675

    2-626 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set sp ant re e po rtv l an cos t set spantree port vlancost T o assign a lower path cost to a set of VLANs on a port , use the set spantree port vlancost command . set spantr ee por tvlancost mod/po ...

  • Cisco Systems 6500 - page 676

    2-627 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set spa ntr ee portv la ncost Command Mode s Pri vile ged. Usage Guid el i nes Follow these guidel ines wh en you set th e path cost for VLANs on a port: • The cost va lue specified is used as the path ...

  • Cisco Systems 6500 - page 677

    2-628 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set sp ant re e po rtv l an cos t Relat e d Commands clear s pantr ee portvlancost set ch anne l vlanc ost show spantr ee ...

  • Cisco Systems 6500 - page 678

    2-629 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set spantr ee portvla npri set spantree portvlanpri T o set the p ort prior ity for a su bset of VLANs in the tru nk port , use the set spantree po rtvlan pri comm and. set spant ree port vlanpri m od/po ...

  • Cisco Systems 6500 - page 679

    2-630 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spantree p ortvlanpri Relat e d Commands clear s pantr ee portvlanpri show spantr ee ...

  • Cisco Systems 6500 - page 680

    Chapter 2 Ca talyst 6 500 Series Swi tch and ROM M onitor Comm ands set s pantree priority 2-631 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 22 set spantree priority T o set th e bridge priority for a VLAN or an inst ance whe n PVST+ or MI STP is runnin g, use the set spantree priority command. set spantree priorit y b ...

  • Cisco Systems 6500 - page 681

    2-632 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spantree priority This exam ple sh ows how to set the br idge pri orit y fo r M ST inst anc e 0: Console> (enable) set spantree priority 28672 mst 0 MST Spantree 0 bridge priority set to 28672 ...

  • Cisco Systems 6500 - page 682

    2-633 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set sp antree r oot set spantree root T o set the primary o r secondar y root fo r specifi c VLANs, all VLANs of the switc h, or a n instance, u se the set spantree root command. set spantree root [ secon ...

  • Cisco Systems 6500 - page 683

    2-634 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spantree root The set spa ntree root brid ge priorit y value is 16384, except when M A C re ducti on or MISTP are enabled, the n the valu e is 24576. This c omm and incr e ases p ath co sts to a ...

  • Cisco Systems 6500 - page 684

    2-635 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set sp antree r oot These ex amples sho w that setting the b ridge priority to 819 2 was not suf ficient to make this switch the root. The prio rity was furth er reduced to 7192 (100 le ss than the curren ...

  • Cisco Systems 6500 - page 685

    2-636 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spantree uplinkfast set spantree uplinkfast T o enab le fast switcho ver to alter nate ports when the root p ort f a ils, use the set spantree uplinkfast command. This comman d applies to a switc ...

  • Cisco Systems 6500 - page 686

    2-637 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set spantr ee uplinkf ast Y ou do no t have to turn on the all-pr otoc ols fe atu re on Catal yst 6500 ser ies sw itch es t hat h ave both the UplinkFas t a nd pro t oco l filtering f eat ur es en ab led. ...

  • Cisco Systems 6500 - page 687

    2-638 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set summertime set summertime T o spec ify whet her the sys tem s hould set t he clo ck ahea d o ne hou r during daylig ht saving time , use the set summertime command. set summertime { enable | disa ...

  • Cisco Systems 6500 - page 688

    2-639 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set su mmertim e Exam ples Th is exampl e shows how to caus e the syst em t o set the clock ahea d one ho ur du ring da ylight s aving time: Console> (enable) set summertime enable PDT Summertime is en ...

  • Cisco Systems 6500 - page 689

    2-640 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set system baud set system baud T o set th e consol e port ba ud rate, u se the set syst em baud comman d. set system ba ud ra te Syntax Descript ion Defaults The de fault is 9600 bau d. Comma nd T y ...

  • Cisco Systems 6500 - page 690

    2-641 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set system con tact set system contact T o i d en tif y a co ntac t p ers on for t h e sys te m, use th e set sy stem cont act co mmand . set system cont act [ cont act_string ] Syntax D escr i pti on Def ...

  • Cisco Systems 6500 - page 691

    2-642 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set system core- dump set system core-dump T o enable or disable the core dump feature, use the set system core-dump comman d. set system c ore-dump { ena ble | disable } Syntax Descript ion Defaults ...

  • Cisco Systems 6500 - page 692

    2-643 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set system cor e-file set system core-file To specify the cor e image filename, use t h e set s ys te m core- file comm and. set system c ore-file { de vice :[ f ilename ]} Syntax D escr i pti on Defaults ...

  • Cisco Systems 6500 - page 693

    2-644 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set system countryco d e set system countryco de T o s peci fy t he c ou ntry w here the syste m is physi ca lly loc ate d, us e the se t system countrycode comm and. set system c ountryco de code Sy ...

  • Cisco Systems 6500 - page 694

    2-645 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set system cro ssbar -fa llback set system crossbar-fal lback T o selec t the ac tion tak en when th e Switch Fa bric Mod ule fails, use th e set system crossbar -fallback comm and. set system crossbar-fa ...

  • Cisco Systems 6500 - page 695

    2-646 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set system highava ilability set system highavailability T o enable or disable h igh system a vai lability for the switch, use the set system higha vailability comm an d. set system higha vailabilit ...

  • Cisco Systems 6500 - page 696

    2-647 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set syst em higha vailabi lity ve rsi oning set system highavailability versioning T o ena ble a nd di sabl e su ppo rt for sup erv isor engi ne im age versi onin g, use t h e set sy stem higha vailabilit ...

  • Cisco Systems 6500 - page 697

    2-648 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set system highavailability versioning Exam ples This example sho ws how to enable high-av ailability v ersioning: Console> (enable) set system highavailability versioning enable Image versioning ...

  • Cisco Systems 6500 - page 698

    2-649 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set sy stem info -log set system info-log T o log the output of speci fied show com mands to a server for tro ubleshoo ting and de bugging, use t he set system inf o-log comma nd. set system info-log { en ...

  • Cisco Systems 6500 - page 699

    2-650 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set system info-log Usage Guid el i nes When you enter the sh ow comman d whos e outp ut is t o be l ogg ed, y ou mus t type a del imiti ng chara cter with no sp ac es on ei ther side of the com ma n ...

  • Cisco Systems 6500 - page 700

    2-651 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set sy stem locati on set system location T o identify the location of the system, use the set sy stem l oca tion command. set system lo cation [ location_string ] Syntax D escr i pti on Defaults Thi s co ...

  • Cisco Systems 6500 - page 701

    2-652 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s se t sy stem mo de m set system modem T o enable or disable mo dem cont rol lines on the cons ole port , use the set system modem comman d. set system mo dem { en a b le | disable } Syntax Descript i ...

  • Cisco Systems 6500 - page 702

    2-653 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set sy stem name set system name T o conf igure a name fo r the syst em, use the set system name comman d. set system na me [ name_st ring ] Syntax D escr i pti on Defaults The de fault is no system na me ...

  • Cisco Systems 6500 - page 703

    2-654 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set system super visor-upd ate set system supervisor-update T o con figure t he Er asa ble Progr am mabl e L ogic Device (E PLD) upg rade p roce ss, use the set sy stem supervisor -update comma nd. s ...

  • Cisco Systems 6500 - page 704

    2-655 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set syst em su per viso r-updat e This exam ple sh ows how to disab le EPL D up gra des : Console> (enable) set system supervisor-update disable Supervisor EPLD update during reset is disabled. Console ...

  • Cisco Systems 6500 - page 705

    2-656 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set system switchmode allow set system switchmode allow T o conf igure the switch ing mode for the syst em, use th e set syst em switchmode allow command. set system switchmode allow { truncated | bu ...

  • Cisco Systems 6500 - page 706

    2-657 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set sy stem switch mode a llow This example sho ws how to set the switching mode to bu s-only: Console> (enable) set system switchmode allow bus-only System switchmode allow set to bus-only. Console> ...

  • Cisco Systems 6500 - page 707

    2-658 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set system syslog-dump set system syslog-dump T o write system messag es in the syslog bu ffer to a flash file before the system fail s , use the set system syslog-dump co mmand. set system s yslog- ...

  • Cisco Systems 6500 - page 708

    2-659 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set sy stem syslog- file set system syslog-file T o specify the f lash devi ce and f ile name for the sy slog dump when the system fa ils, use the set system syslog-file comm and. set system sy slog- file ...

  • Cisco Systems 6500 - page 709

    2-660 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set tacacs attempts set tacacs attempts T o configure t he m aximum number of login a ttempt s allowed to the T A CA CS+ server, use the set taca cs attemp ts com mand . set tac acs a ttemp ts coun t ...

  • Cisco Systems 6500 - page 710

    2-661 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set taca cs directedre quest set tacacs directed request T o en able or disa ble the T A CA CS+ di rected-requ est o ption, use the se t tacacs directedr e quest comman d. When enabl e d, you ca n di rect ...

  • Cisco Systems 6500 - page 711

    2-662 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set tacacs key set tacacs key T o set the ke y for T A CA CS+ authentication and enc ryption, use the set taca cs ke y comma nd. set ta cacs k ey key Syntax Descript ion Defaults The def a ult v alue ...

  • Cisco Systems 6500 - page 712

    2-663 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set tacacs server set tacacs serv er T o de fin e a T AC A CS+ serv er, use the set ta ca cs se rver co mman d. set taca cs server ip_addr [ primary ] Syntax D escr i pti on Defaults Thi s command has no ...

  • Cisco Systems 6500 - page 713

    2-664 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set tac acs timeout set tacacs time out T o set t he response tim eout interv al for t he T A CA CS+ server d aemon, use th e set tacacs tim eout command. The T A CA CS+ server must respond to a T A ...

  • Cisco Systems 6500 - page 714

    2-665 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set test diagf ail-act ion set test diagfail-action T o set t he action th at the supervisor en gine tak es when a diagnostics test fails, use the se t tes t diagfail-ac tion command. set tes t di agfa il ...

  • Cisco Systems 6500 - page 715

    2-666 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set test d iaglevel set test diaglevel T o s et th e di a gnos tic l evel, use t he set te st diaglevel comm and. set test dia glevel { complete | minimal | bypass } Syntax Descript ion Defaults The ...

  • Cisco Systems 6500 - page 716

    2-667 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set ti me set time T o change the time of day on the system clo ck, use the set time comman d. set time [ d ay_ of_week ] [ mm/ dd /yy ] [ hh:mm:ss ] Syntax D escr i pti on Defaults Thi s command has no d ...

  • Cisco Systems 6500 - page 717

    2-668 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s se t tim ez on e set timezone T o set the time zone for the system, use the set timezo ne com mand. set timezone [ zone_n ame ] [ hou rs [ minutes ]] Syntax Descript ion Defaults The default is the t ...

  • Cisco Systems 6500 - page 718

    2-669 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set traffic m on itor set traffic monitor T o conf igure the thr eshold at which a hi gh-traf fic log will be generated, use the set traf fic monitor comm and. set tra ffic monitor thre shold Syntax D esc ...

  • Cisco Systems 6500 - page 719

    2-670 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set trunk set trunk T o conf ig ure trunk ports and to add VLANs to the all owed VLAN list for exis ting trunks, use the set trunk comm and. set trunk mod/po rt { on | off | desirable | auto | nonego ...

  • Cisco Systems 6500 - page 720

    2-671 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set trunk Usage Guid el i nes This c omm and is not sup port ed by t he NAM. The fo llo wing usage guidel ines apply when using t he set trunk comman d: • If a tru nk- type keyword ( isl , dot1 q , nego ...

  • Cisco Systems 6500 - page 721

    2-672 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set trunk This e xample shows ho w to set the t runk mode to nonegotiate , the trunk t ype to 802.1Q, and t he 802. 1Q Ether type to 0x1 234 on p ort 1/ 1: Console> (enable) set trunk 1/1 nonegoti ...

  • Cisco Systems 6500 - page 722

    Chapter 2 Ca talyst 6 500 Series Swi tch and ROM M onitor Comm ands set udl d 2-673 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 22 set udld T o enab le or dis able the UDLD info rmation di spla y on specif ied port s or glo bally on al l por ts, us e the set udld command. set udld enable | disable [ mod/port ] Syntax D ...

  • Cisco Systems 6500 - page 723

    2-674 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set udld This exam ple sh ows how to disab l e the UD LD m es sag e displ ay f or po rt 1 o n m odu le 2: Console> (enable) set udld disable 2/1 UDLD disabled on port 2/1. Warning:UniDirectional L ...

  • Cisco Systems 6500 - page 724

    2-675 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set udld aggres si ve-mod e set udld aggressive-mo de T o enable or disable the UDLD aggressi ve mod e on specif ied ports, us e the set udld aggressiv e -mode comm and. set udld agg ressive-mode enable | ...

  • Cisco Systems 6500 - page 725

    2-676 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set udld interval set udld interval T o set t he UDLD message inte rva l timer , use the set udld interval command . set udld interval interval Syntax Descript ion Defaults The de fault is 15 seco nd ...

  • Cisco Systems 6500 - page 726

    2-677 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set vl an set vlan T o group p orts int o a VLAN, set the private VLAN type , map or un map VLA Ns to or f rom an instance , specify a n 8 02.1x port to a VLAN, o r secure a rang e o f VLANs o n a Firewal ...

  • Cisco Systems 6500 - page 727

    2-678 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set v lan Defaults The de fault values ar e as follows: • Switche d Ethern et ports and Ether net repe ater por ts are in VLA N 1. • said is 100001 for VLAN 1, 100002 for VLAN 2, 100003 fo r VLAN ...

  • Cisco Systems 6500 - page 728

    2-679 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set vl an If you spe cify a r an ge of V LA Ns, y ou cann ot u se the VLAN name . If you ente r the mistp-instance none co m m a nd , the specified VLANs are unmapped from any instance they are mapped to. ...

  • Cisco Systems 6500 - page 729

    2-680 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set v lan T o secure a range of VLANs on a Fire wall Services Mod ule, these conditions must be satisfied : 1. Port membe r ship must be de fin ed for the VLAN s , and the VLANs m ust be in acti ve s ...

  • Cisco Systems 6500 - page 730

    2-681 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set vl an Relat e d Commands clear co nfi g pvlan clear pvlan mapping clea r vlan set pvlan set spant ree macr eduction set vlan mapping set vl an ver ify -por t-p rovisioning show pvlan show pvlan mappin ...

  • Cisco Systems 6500 - page 731

    2-682 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set vlan mapping set vlan mapping T o map r eserved VLANs to n onreserved VL ANs or map 8 02.1Q V LANs to ISL VLANs, use the set vlan mapping comm and. set vlan mapping reserv ed vlan non-res erved v ...

  • Cisco Systems 6500 - page 732

    2-683 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set vl an mappi ng If the table is full, the command is aborted wit h an error message indica ting the table is full. The dot 1q VLANs are r ejected if any exten ded-ran ge VLANs are prese n t. Exam ples ...

  • Cisco Systems 6500 - page 733

    2-684 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set vlan verify-port-provisioning set vlan verify-port-provis ioning T o ena ble o r disab le VLA N po rt -p rovisioni ng verification on al l po rts, use th e set v lan veri fy-port- prov isioning c ...

  • Cisco Systems 6500 - page 734

    2-685 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set vmps dow nloa dm et hod set vmps down loadmeth od T o spec ify whether to use TF TP or rcp t o do wnl oad the V MPS dat abase, use the set vmps downloadmethod comman d. set vmps downloadmethod { rcp | ...

  • Cisco Systems 6500 - page 735

    2-686 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set vmps downl oadserver set vmps downloadserver T o spec ify the IP ad dress of t he TFTP o r rcp server from which the VMPS data base is download ed, use the set vmps downloadserver com mand. set v ...

  • Cisco Systems 6500 - page 736

    2-687 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set vm ps ser ver set vmps server T o conf ig ure the VMPS, use the set vmps server command . set vmps server ip_ addr [ primary ] set vmps se rver retry count set vmps ser ver r econfirmi nterval interva ...

  • Cisco Systems 6500 - page 737

    2-688 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set vmps server Relat e d Commands clear vmps serv er show vmps ...

  • Cisco Systems 6500 - page 738

    2-689 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set vmps state set vmps state T o enable or disable VMPS, use the set vmps state co mman d. set vmps st ate { enable | disable } Syntax D escr i pti on Defaults By defau lt, VMPS is di sabled. Comma nd T ...

  • Cisco Systems 6500 - page 739

    2-690 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set vtp set vtp T o set t he options for VTP , use the se t vtp command. set vtp domain dom ain_nam e set vtp mode { client | serv er | tran sparent | of f } [ vlan | unknown ] set vtp passwd passwd ...

  • Cisco Systems 6500 - page 740

    2-691 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set vt p Comma nd T ypes Swit ch co mman d. Command Mode s Pri vile ged. Usage Guid el i nes The following gu ide lines appl y to V TP versi on s 1, 2, an d 3: • VTP suppor ts four di fferent mode s: se ...

  • Cisco Systems 6500 - page 741

    2-692 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set vtp The fo llowing guideline s apply onl y to VTP version 3: • VTP version 3 works concurre ntly with VTP versisons 1 an d 2. VTP version 3 is impleme nted independe ntly be caus e it only dist ...

  • Cisco Systems 6500 - page 742

    2-693 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands set vt p Relat e d Commands clea r vlan clear vtp pruneeligible set vlan set vtp pruneeligible show vlan show vtp domain ...

  • Cisco Systems 6500 - page 743

    2-694 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set vtp pruneeligible set vtp pruneeligib le T o specify which VTP dom ain VLANs are pruning elig ible, use the set vtp pruneeligible com mand. set vtp pruneeligible vlans Syntax Descript ion Default ...

  • Cisco Systems 6500 - page 744

    Chapter 2 Ca talyst 6 500 Series Swi tch and ROM M onitor Comm ands show accou nting 2-695 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 22 show accou nting T o di splay ac counti ng setup and c onfigurat ion infor mati on on t he sw itch , us e the show ac counti ng comm and. show accoun ting Syntax Descript ion This c ...

  • Cisco Systems 6500 - page 745

    2-696 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show acc oun ting Overall Accounting Traffic: Starts Stops Active Exec 1 0 2 Connect 0 0 1 Command 0 0 0 System 0 0 0 Console> (enable) This e xample shows th e conf iguration details of a switch ...

  • Cisco Systems 6500 - page 746

    2-697 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show ac coun ting Relat e d Commands set accounting commands set accounting connect set ac countin g exec set accounting suppress set accounting syste m set accounting update ...

  • Cisco Systems 6500 - page 747

    2-698 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show acl log show acllog T o display the status of A CL log ra te limitin g, use the show acllog command . show acllog Syntax Descript ion This c omm and ha s no a rgume nts o r keywords. Defaults Th ...

  • Cisco Systems 6500 - page 748

    2-699 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show ac lmer ge algo show aclme rge algo T o display informat io n about the A CL merge algor ithm, use the sho w aclm er ge com mand. show aclmerge algo Syntax D escr i pti on This comm a nd ha s n o arg ...

  • Cisco Systems 6500 - page 749

    2-700 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show ali as show alias T o di splay a li sti ng of de fined com mand alia ses, use the show alias command . show alias [ name ] Syntax Descript ion Defaults Thi s command has no de fault setti ngs. C ...

  • Cisco Systems 6500 - page 750

    2-701 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show arp show arp T o dis pla y the ARP t able , use the show arp comman d. show arp [ ip_addr | hostnam e ] [ noalias ] Syntax D escr i pti on Defaults Thi s command has no de fault setti ngs. Comma nd T ...

  • Cisco Systems 6500 - page 751

    2-702 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show auth entication show authen tication T o display authentica tion information, use the show authen ticatio n comman d. show authenti catio n Syntax Descript ion This c omm and ha s no a rgume nts ...

  • Cisco Systems 6500 - page 752

    2-703 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show au tho rization show authorizatio n T o display auth orization setup a nd config uration inform ation on the swit ch, use the sho w author ization comm and. show authorization Syntax D escr i pti on ...

  • Cisco Systems 6500 - page 753

    2-704 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show bann er show banne r T o v iew the messa ge of the day ( MOTD), the Ca talyst 650 0 s er ies Switc h Fabr ic Mo dul e L CD bann er, and the st atus of the T el net bann er stored in NVR AM, use ...

  • Cisco Systems 6500 - page 754

    2-705 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show bo ot show boot T o displa y the content s of the BOOT envi ronment v ariables and the conf iguration regi ster setting, use the show boot command. show boot [ mod ] Syntax D escr i pti on Defaults T ...

  • Cisco Systems 6500 - page 755

    2-706 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show boo t device show boot de vice T o display the NAM boot stri ng stored in NVRA M, use the show boot device comm and. show boot de vice mod Syntax Descript ion Defaults Thi s command has no de fa ...

  • Cisco Systems 6500 - page 756

    2-707 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show ca m show cam T o display CAM table entr ies, use the show c am command. show cam { dynamic | st atic | pe rm a nen t | syste m } [{ mod/port } | vlan ] show cam mac_addr [ vlan ] Syntax D escr i pti ...

  • Cisco Systems 6500 - page 757

    2-708 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s sho w ca m Exam ples Th is exampl e sh ows how to displa y d ynami c C AM en tri es for a ll V LAN s: Console> show cam dynamic * = Static Entry. + = Permanent Entry. # = System Entry. R = Router ...

  • Cisco Systems 6500 - page 758

    2-709 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show ca m Relat e d Commands clear ca m set cam show cam agingtime show conf ig ...

  • Cisco Systems 6500 - page 759

    2-710 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show cam agi ngtime show cam ag ingti me T o display CAM aging time info rmation for all conf igured VLANs, use the show cam agingtim e comm and. show cam agingtime [ vlan ] Syntax Descript ion Defau ...

  • Cisco Systems 6500 - page 760

    2-711 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show ca m coun t show cam co unt T o display the number of CAM entries only , u se the show cam count command . show cam count { dynamic | static | permanent | system } [ vlan ] Syntax D escr i pti on Def ...

  • Cisco Systems 6500 - page 761

    2-712 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show cam ms fc show cam msfc T o display the router ’ s MA C-VLAN entries, use the sho w cam msfc comm and. show cam msfc { mod } [ vlan ] Syntax Descript ion Defaults Thi s command has no de fault ...

  • Cisco Systems 6500 - page 762

    2-713 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show ca m not ification show cam notification T o display the status of CAM table notificat ions, notification intervals, and MAC addresses added a nd deleted, use the show ca m noti fication co mman d. s ...

  • Cisco Systems 6500 - page 763

    2-714 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show cam notification This exam ple shows how to displ ay C AM not ification i n forma tion for po rts 1-6 on modu le 2: Console> show cam notification 2/1-6 Mod/Port Added Removed --------- ----- ...

  • Cisco Systems 6500 - page 764

    2-715 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show ca m not ification Relat e d Commands clear ca m clear ca m notif icatio n set cam set ca m notif icatio n set snmp tr ap show cam ...

  • Cisco Systems 6500 - page 765

    2-716 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show cd p show cdp T o di splay Cisc o D iscovery Pr otocol (C DP) in forma tion, use th e show cdp comm and. show cdp show cdp ne ighbors [ mod [/ port ]] [ vl an | duplex | capabilities | detail ] ...

  • Cisco Systems 6500 - page 766

    2-717 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show cd p This example shows how to display detai led CDP neighbor informa tion. Th e display varies dependi ng on yo ur ne twork c onfigurati on at the ti me you r un the c omman d. Console> show cdp ...

  • Cisco Systems 6500 - page 767

    2-718 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show cd p Port Device-ID Port-ID NativeVLAN -------- ------------------------------- ------------------------- ---------- 3/5 002267619 3/6 * 1 3/6 002267619 3/5 1 4/1 002267619 4/2 1 4/2 002267619 4 ...

  • Cisco Systems 6500 - page 768

    2-719 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show ch anne l show chann el T o d ispl ay E t herCh ann el i nfo rmat ion fo r a ch an nel , u s e t he show channel comman d. show channel [ channel_id ] [ info | statistics | mac ] show channel [ chann ...

  • Cisco Systems 6500 - page 769

    2-720 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show chan nel This exam ple shows how to di splay c ha nnel in forma ti on for a ll c hanne ls: Console> show channel Channel Id Ports ----------- ----------------------------------------------- 7 ...

  • Cisco Systems 6500 - page 770

    2-721 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show ch anne l Chan Port if- Oper-group Neighbor Chan Oper-Distribution id Index Oper-group cost Method ---- ----- ----- ---------- ---------- ----- ----------------- 769 1/1 - 1 0 ip both 769 1/2 - 1 0 i ...

  • Cisco Systems 6500 - page 771

    2-722 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show chan nel 768 469263 48083 Channel Dely-Exced MTU-Exced In-Discard Lrn-Discrd In-Lost Out-Lost -------- ---------- ---------- ---------- ---------- ---------- ---------- 768 0 0 0 0 0 0 Console&g ...

  • Cisco Systems 6500 - page 772

    2-723 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show ch anne l ---- ----- -------- -------- -------- 769 1/1 on auto-on auto-on 769 1/2 on auto-on auto-on Console> Console> show channel 769 info gmrp Chan Port GMRP GMRP GMRP id status registratio ...

  • Cisco Systems 6500 - page 773

    2-724 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show chan nel gro up show chann el group T o disp lay Ether Chan n el grou p status info rmat ion, use the show channel group comm and. show channel g roup [ admin_gr oup ] [ inf o | statistics ] sho ...

  • Cisco Systems 6500 - page 774

    2-725 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show ch anne l group Admin Port Device-ID Port-ID Platform group ----- ----- ------------------------------ ------------------------- ---------- 154 1/1 154 1/2 066510644(cat26-lnf(NET25)) 2/1 WS-C5505 Co ...

  • Cisco Systems 6500 - page 775

    2-726 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show chan nel gro up Admin Port Qos-Tx Qos-Rx Qos-Trust Qos-DefCos Qos-Port-based group ----- ----- ------ ------ ------------ ---------- -------------- 154 1/1 2q2t 1q4t untrusted 0 false 154 1/2 2q ...

  • Cisco Systems 6500 - page 776

    2-727 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show ch anne l group Console> show channel group 154 info gvrp Admin Port GVRP GVRP GVRP group status registeration applicant ----- ----- -------- ------------- --------- 154 1/1 disabled normal normal ...

  • Cisco Systems 6500 - page 777

    2-728 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show channel hash show chann el has h T o display the channe l port the traff ic goes to based on the curren t channel distrib ution mode, use the show channel ha sh command . show channel ha sh chan ...

  • Cisco Systems 6500 - page 778

    2-729 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show ch annel ha sh Exam ples This example sho ws how to display hash informat ion in a channel: Console> show channel hash 769 10.6.1.1 10.6.2.3 Selected channel port:1/2 Console> Relat e d Command ...

  • Cisco Systems 6500 - page 779

    2-730 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show channel mac show chann el mac T o display MA C information in the channel, use the sho w channel mac comm and. show channe l mac Syntax Descript ion This c omm and ha s no a rgume nts o r keywor ...

  • Cisco Systems 6500 - page 780

    2-731 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show ch anne lprot oco l show chann elprotocol T o d i s pl a y the channeling pro tocol used by each module in the s ystem, us e t h e show channelpr otocol comm and. show channelpr otocol Syntax D escr ...

  • Cisco Systems 6500 - page 781

    2-732 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show channel traffic show chann el traffic T o display c hannel p ort utilization based on MAC counters, use the show channel traffic command. show channel t raffi c [ chann el_id ] Syntax Descript i ...

  • Cisco Systems 6500 - page 782

    2-733 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show co nfi g show config T o d isplay the nond efaul t sys tem or m odule con figura tion, u se the show config command. show conf ig [ all ] show conf ig [ syst em | mod ] [ all ] show c onfig a cl loca ...

  • Cisco Systems 6500 - page 783

    2-734 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show conf ig ! #frame distribution method set port channel all distribution mac unknown ! #snmp set snmp trap 0.0.0.0 set snmp trap 0.0.0.0 ! #kerberos set kerberos server 0.0.0.0 set kerberos server ...

  • Cisco Systems 6500 - page 784

    2-735 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show co nfi g #rcp set rcp username 1 ! #dns set ip dns server 171.68.10.70 primary set ip dns server 171.68.10.140 set ip dns enable set ip dns domain cisco.com ! #spantree set spantree fwddelay 4 801 se ...

  • Cisco Systems 6500 - page 785

    2-736 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show conf ig #module 4 empty ! #module 5 : 48-port 10/100BaseTX (RJ-45) ! #module 6 empty ! set vlan 100 6/1 set spantree portcost 6/1 200 ! #module 7 : 24-port 10/100BaseTX Ethernet set vlan 5 7/5 s ...

  • Cisco Systems 6500 - page 786

    2-737 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show co nfi g #system set system baud 9600 set system modem disable set system name set system location set system contact ! . . . Console> This example shows ho w to display nond efault syste m config ...

  • Cisco Systems 6500 - page 787

    2-738 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show conf ig This e xample sho ws how to display the A CL conf iguration f ile location: Console> (enable) show config acl location ACL configuration is being saved in NVRAM. Console> (enable) ...

  • Cisco Systems 6500 - page 788

    2-739 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show co nfi g m od e show config mode T o disp lay the syst em conf igur ation mode cur rently run ning on the switch , use the show conf ig mode comm and. show conf ig mode Syntax D escr i pti on This co ...

  • Cisco Systems 6500 - page 789

    2-740 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show co n fig q os a cl show config qos acl T o display the co mmitted ac cess lists in a c ommand l ine form at, use th e show conf ig qos acl comm and. show conf ig qo s a cl { ac l_na me | a ll } ...

  • Cisco Systems 6500 - page 790

    2-741 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show co ps show cops T o display COPS information, use the show cops comm and. show cops inf o [ diff-se rv | rsvp ] [ noalias ] show cops r oles Syntax D escr i pti on Defaults Thi s command has no de fa ...

  • Cisco Systems 6500 - page 791

    2-742 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show co p s COPS connection state : connected Last active server : 171.21.34.56 Primary configured server : 171.21.34.56 [3288] Secondary configured server : 171.21.34.57 [3288] Console> This exam ...

  • Cisco Systems 6500 - page 792

    2-743 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show co ps COPS RSVP client state ---------------------- COPS connection state : not-connected TCP connection state : not-connected Last active server : - Primary configured server : - Secondary configure ...

  • Cisco Systems 6500 - page 793

    2-744 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show count ers show counte rs T o d isplay h ardwa re c oun ter s fo r a por t, al l p orts on a m odul e, or a su pe rviso r e ngin e, u se t he show counters com mand. show counters { mod | mo d / ...

  • Cisco Systems 6500 - page 794

    2-745 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show co unt ers 15 rxTxHCpkts1024to1518Octets = 0 16 rxDropEvents = 0 17 txHCTrunkFrames = 0 18 rxHCTrunkFrames = 0 19 rxHCDropEvents = 0 32 bit counters 0 rxCRCAlignErrors = 0 1 rxUndersizedPkts = 0 2 rx ...

  • Cisco Systems 6500 - page 795

    2-746 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show count ers Ta b l e 2 - 2 9 describes the possible fields in th e show coun ters comm and out put. T able 2-29 sho w count e rs Command Output Fields Field Des criptio n 64-bit coun ters rxHCT ot ...

  • Cisco Systems 6500 - page 796

    2-747 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show co unt ers 32-bit coun ters rxCRCA lignEr rors Numbe r of packets received that had a length (exclud ing fram ing bits, but includi ng FCS octet s) betwe e n 6 4 and 1 518 oct ets, inc lusive, and h ...

  • Cisco Systems 6500 - page 797

    2-748 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show count ers dot3StatsSingle ColFr am es A count of successfully t ra nsmitte d fra mes on a p ar tic ular i nte rf ac e f or wh ich tran smission is inhibited b y exac tly one c ollision. A frame ...

  • Cisco Systems 6500 - page 798

    2-749 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show co unt ers Relat e d Commands clear co unters rxPause Numbe r of c ontr ol f ra mes r ece ived at the gi gabi t l evel. This co unt er i s valid only o n a Gigabi t E ther net po rt. rxT otalDrops Th ...

  • Cisco Systems 6500 - page 799

    2-750 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show crypto key show crypt o key T o display RSA key pa ir information, use the sho w crypto k ey comm and. show crypto ke y Syntax Descript ion This c omm and ha s no a rgume nts o r keywords. Defau ...

  • Cisco Systems 6500 - page 800

    2-751 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show de fau lt show defaul t T o che c k the stat us of the d efault po rt s ta tus sett ing, u se the show default command. show default Syntax D escr i pti on This comm a nd ha s n o keywords or argume ...

  • Cisco Systems 6500 - page 801

    2-752 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show dot1 q-all-tagged show dot1q-all-tagg ed T o display the status of the dot1q taggi ng featu re on the switch, use the show dot1q-all-tagged comm and. show dot1q-all-tagged Syntax Descript ion Th ...

  • Cisco Systems 6500 - page 802

    Chapter 2 Ca talyst 6 500 Series Swi tch and ROM M onitor Comm ands show dot1 x 2-753 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 2 show dot1x T o display the system dot1x capabi lities, protoco l version , and timer val u es, use the show dot1x comm an d. show dot1x Syntax Descript ion This c omm and ha s no keywords ...

  • Cisco Systems 6500 - page 803

    2-754 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show dvla n statistics show dvlan statistics T o display dynamic VLAN statistic s, use the show dvlan statistics co mmand. show dvlan statistics Syntax Descript ion This c omm and ha s no keywords or ...

  • Cisco Systems 6500 - page 804

    2-755 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show en vironm ent show environme nt T o display en vironmenta l, temper ature, and inline p o wer statu s informa tion, use the show en vironment comm and. show environment [ all | temperatu re | power [ ...

  • Cisco Systems 6500 - page 805

    2-756 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show enviro nment Exam ples Th is exampl e sh ows how to displa y environmen tal st atus in forma ti on: Console> show environment Environmental Status (. = Pass, F = Fail, U = Unknown, N = Not Pr ...

  • Cisco Systems 6500 - page 806

    2-757 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show en vironm ent This exa mple shows ho w to display temperature information: Console> show environment temperature Intake Exhaust Device 1 Device 2 Slot Temperature Temperature Temperature Temperatu ...

  • Cisco Systems 6500 - page 807

    2-758 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show enviro nment This example shows ho w to di splay the in line power status for a spe cific module: Console> show environment power 9 Module 9: Default Inline Power allocation per port: 9.500 W ...

  • Cisco Systems 6500 - page 808

    2-759 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show en vironm ent This e xample shows h ow to display co nnector rating informa tion: Console> show environment connector Chassis connector rating : 756.00 Watts (18.00 Amps @42V) Slot connector ratin ...

  • Cisco Systems 6500 - page 809

    2-760 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show enviro nment Relat e d Commands set inlinepowe r defaultallocation show environment show port inlinepo wer Slot power Require ment/U sage Power Requested Module power requested. Power Allocat ed ...

  • Cisco Systems 6500 - page 810

    2-761 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show err dis ab le-timeou t show errdisab le-timeo ut T o displ ay the configurat ion and stat us of the errd isable tim eout, use the sh ow errd isa ble -ti meo ut comm and. show e rrdisable-time out Syn ...

  • Cisco Systems 6500 - page 811

    2-762 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show error detecti on show errord etection T o display error detectio n settings, u se the show errord etec ti on command. sho w err ordetection Syntax Descript ion This c omm and ha s no a rgume nts ...

  • Cisco Systems 6500 - page 812

    2-763 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show fabri c channe l show fabri c channel T o display Switch Fab ric Module inform ation, use the show fabric channel command. show fa bric channel counter s { mo d | all } [ hex ] show fa bric channel u ...

  • Cisco Systems 6500 - page 813

    2-764 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show f abric chan nel Exam ples Th is exampl e sh ows how to displ ay fa bric cha nnel cou nter inf or mat ion f or a sp eci fic modu le: Console> show fabric channel counters 2 Channel 0 counters ...

  • Cisco Systems 6500 - page 814

    2-765 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show fabri c channe l 1 txErrors = 0/0/0 2 txDropped = 0/0/0 Console> This example shows how to display swi tch mod e and fabric c hanne l stat us o n a Supe rviso r Engine 720 and othe r fabric-ena bl ...

  • Cisco Systems 6500 - page 815

    2-766 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show f abric chan nel Ta b l e 2 - 3 1 descri bes the f ields in the show fa bric channel output. Relat e d Commands switch fabric T able 2-31 sho w f abr ic channel Command Outpu t Fields Field Desc ...

  • Cisco Systems 6500 - page 816

    2-767 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show fa bri c status show fabri c status T o di splay the in tegrate d switc h fabric sta tus an d f orward ing speed , use the s how f abric status comm and. Syntax D escr i pti on This comm a nd ha s n ...

  • Cisco Systems 6500 - page 817

    2-768 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show file show file T o display the conte nts of a file that hav e been saved to Flash memory , use the show f ile command. show f ile [ device : ] fil ena me [ dump ] Syntax Descript ion Defaults Th ...

  • Cisco Systems 6500 - page 818

    2-769 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show fire w a ll show firewall T o displa y the parame ters that ar e config ured for a Fire wall Services Mod ule (FWSM) , use the show fi re w al l command. show f irewal l multiple-vlan-i nterfaces Syn ...

  • Cisco Systems 6500 - page 819

    2-770 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show fla sh show flash T o list bootfl ash or Flash PC card i nforma tion, including file code n ames, versio n numb ers, volume ID, status , and si z es , us e t he show flash command. show flash de ...

  • Cisco Systems 6500 - page 820

    2-771 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show flas h Console> show flash chips ******** Intel Series 2+ Status/Register Dump ******** ATTRIBUTE MEMORY REGISTERS: Config Option Reg (4000): 2 Config Status Reg (4002): 0 Card Status Reg (4100): ...

  • Cisco Systems 6500 - page 821

    2-772 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show fla sh USAGE INFO: Bytes Used = 201D9B Bytes Available = 5FE265 Bad Sectors = 0 Spared Sectors = 0 OK Files = 1 Bytes = 100FC0 Deleted Files = 1 Bytes = 100DDB Files w/Errors = 0 Bytes = 0 ***** ...

  • Cisco Systems 6500 - page 822

    2-773 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show ftp show ftp T o di spla y the pa ramete rs co nf igured for Fil e T ransf er Protoc ol (FTP) , use the show ftp command . show ftp Syntax D escr i pti on This comm a nd ha s n o argume nts or keywor ...

  • Cisco Systems 6500 - page 823

    2-774 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show ga rp tim e r show garp timer T o display all the valu es of the General At tr ibute Reg istration Pro tocol (GARP) timers , use the sho w garp timer comm and. show garp timer Syntax Descript io ...

  • Cisco Systems 6500 - page 824

    2-775 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show gmr p configura tion show gmrp conf iguration T o display complete GMRP-rel ated configuration infor mation, use the show gmrp conf igurat ion comm an d. show gmrp configuration Syntax D escr i pti o ...

  • Cisco Systems 6500 - page 825

    2-776 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show gmrp stat istics show gmrp statistics T o display all the GMR P-relate d statistics for a specified VLAN , use the show gmrp statistics comm an d. show gmrp statistics [ vlan ] Syntax Descript i ...

  • Cisco Systems 6500 - page 826

    2-777 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show gmr p timer show gm rp timer T o display all the values of the GMRP timers, use the show gmrp timer co mman d. show gmrp timer Syntax D escr i pti on This comm a nd ha s n o argume nts or keyword s. ...

  • Cisco Systems 6500 - page 827

    2-778 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show gvr p co nfi gur a tio n show gvrp c onfigura tion T o disp lay GVRP c onfigurati on inform ation, in clud ing timer values, wheth er or not GVRP a nd dynami c VLAN c re atio n i s enab le d, a ...

  • Cisco Systems 6500 - page 828

    2-779 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show gvrp co nfigu rat ion Disabled Fixed Normal 4/2 Disabled Fixed Active 4/7 Disbled Forb idden Normal 4/3 Disbled Forb idden Active 4/6 GVRP Participants running on no ports. Console> Relat e d Comm ...

  • Cisco Systems 6500 - page 829

    2-780 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show gvrp stat istics show gvrp statistics T o vie w GVRP statistics for a port, use the show gvrp sta tisti cs command. show gvrp statistics [ mod/port ] Syntax Descript ion Defaults The default is, ...

  • Cisco Systems 6500 - page 830

    2-781 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show gvrp s tatistic s Relat e d Commands clear g vrp st ati st i cs set gvrp set gvrp dy namic- vlan- creation set gvrp registration set gvrp timer show gvrp c onfiguration MAC-Based General Qu erie s re ...

  • Cisco Systems 6500 - page 831

    2-782 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show ifindex show ifindex T o display the informatio n of the specif ic ifIndex, use the show if index comman d. show i findex nu mber Syntax Descript ion Defaults Thi s command has no de fault setti ...

  • Cisco Systems 6500 - page 832

    2-783 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show igm p fl oo ding show igmp fl ooding T o d ispl ay w he the r t he IGM P f l oodin g f eat ure i s e nabl ed o r disab l ed, us e t he show i gmp fl ooding comm and. Syntax D escr i pti on This comm ...

  • Cisco Systems 6500 - page 833

    2-784 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show igmp gd a_status show igmp g da_status T o display the acti ve multicast groups that fold into a Group De stination Add ress (GD A) in a partic ular VLAN for which there i s a Layer 2 CAM en try ...

  • Cisco Systems 6500 - page 834

    2-785 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show igm p le ave-q uery -type show igmp le ave-query-type T o d ispl ay t he ty pe of q ue ry to b e sent whe n a po rt r ece ives a leave mess ag e, us e t he show igmp lea ve-query-type command. Syntax ...

  • Cisco Systems 6500 - page 835

    2-786 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show ig mp m ode show igmp mode T o display the IGMP mode on the switch, use the show i gmp mode comman d. show i gmp mode Syntax Descript ion This c omm and ha s no keywords or argume nts. Defaults ...

  • Cisco Systems 6500 - page 836

    2-787 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show igm p qu erier info rmatio n show igmp querier information T o disp lay queri er inf ormatio n specific to a c onfigured V LAN, us e the show igmp queri er inf ormation comm and. show ig m p q u eri ...

  • Cisco Systems 6500 - page 837

    2-788 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show igmp ratelimit-info show igmp ratelimit-info T o display the I GMP rat e limit for gene ral-q uery p ackets, IG MP snoo ping pro tocol packets, an d Prot ocol Independen t Multic asting v ersion ...

  • Cisco Systems 6500 - page 838

    2-789 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show igm p s tatistics show igmp statistics T o vie w IGMP statistics f or a partic u lar VLAN, use the sho w igmp statistics comm and. show igmp statistics [ vlan_id ] Syntax D escr i pti on Defaults The ...

  • Cisco Systems 6500 - page 839

    2-790 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s sh ow ig mp st a t is ti c s Relat e d Commands clear ig mp statist ics clear multi cast router set igmp set multicast router show multicast group show multicast r outer Group Speci fic Qu eries recv ...

  • Cisco Systems 6500 - page 840

    2-791 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show im agem ib show imagemib T o display i mage infor mation pr ov ided in th e CISCO-IM A GE -MIB for a particu lar imag e, us e the show imagemib command. show imagemib filen ame Syntax D escr i pti on ...

  • Cisco Systems 6500 - page 841

    2-792 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show interface show interface T o display information on ne twork interf aces, use the show inte rface command . show interface Syntax Descript ion This c omm and ha s no a rgume nts o r keywords. De ...

  • Cisco Systems 6500 - page 842

    2-793 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show inte rfa ce Relat e d Commands set interface dest IP address of the host to which the console por t will be conn ected. sc0 Information on the sc0 in-ban d interface . vlan Number of the VLAN to whic ...

  • Cisco Systems 6500 - page 843

    2-794 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show ip alias show ip alias T o s how a listi ng of de fined IP ali ases, use the show ip alias co mman d. show ip alias [ name ] Syntax Descript ion Defaults Thi s command has no de fault setti ngs. ...

  • Cisco Systems 6500 - page 844

    Chapter 2 Ca talyst 6 500 Series Swi tch and ROM M onitor Comm ands show ip dns 2-795 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 2 show ip dns T o s how the DNS name server s and the de fault D NS dom ain nam e, us e t he show ip dns command. show i p dns Syntax Descript ion This c omm and ha s no a rgume nts o r keyw ...

  • Cisco Systems 6500 - page 845

    2-796 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show ip d ns Relat e d Commands clear ip dns domain clear ip dns serv er set ip dns set ip dns domain set ip dns server ...

  • Cisco Systems 6500 - page 846

    2-797 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show ip htt p show ip http T o vie w the HTTP config uration and the switch web interf ace informatio n, use the show ip http comm and. show ip http Syntax D escr i pti on This comm a nd ha s n o argume n ...

  • Cisco Systems 6500 - page 847

    2-798 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show ip http This e xample sho ws the HTTP conf iguration and web interfa ce informatio n if the web interfac e is not supported: Console> show ip http HTTP Configuration Information: ------------ ...

  • Cisco Systems 6500 - page 848

    2-799 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show ip perm i t show ip permit T o display the IP permit list information , use the show ip pe rmit command. show ip permit [ noalias ] Syntax D escr i pti on Defaults This co mmand has no de fa ult v al ...

  • Cisco Systems 6500 - page 849

    2-800 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show ip permit Relat e d Commands clear ip permit set ip permit set snmp tr ap Last Accessed T ime Date and time of the last attempt to log in to the switch from the address. T ype Login-attempt type ...

  • Cisco Systems 6500 - page 850

    Chapter 2 Ca talyst 6 500 Series Swi tch and ROM M onitor Comm ands show ip rout e 2-801 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 2s2 show ip route T o display IP routing table entries, use the show ip route command. show ip r oute [ noalias ] Syntax Descript ion Defaults Thi s command has no de fault setti ngs. Com ...

  • Cisco Systems 6500 - page 851

    2-802 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show ip r out e Relat e d Commands clear ip r oute set ip route ...

  • Cisco Systems 6500 - page 852

    2-803 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show ke rber os show ke rbero s T o display the K erberos conf iguration information , use the show kerberos command. sho w kerber os [ cr eds ] Syntax D escr i pti on Defaults Thi s command has no de fau ...

  • Cisco Systems 6500 - page 853

    2-804 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show kerberos Relat e d Commands clear ke rberos clients mandat ory clear ke rberos cr edentials f orward clea r k er beros rea lm clear ke rbero s serv er clear ke y config -key set kerber os client ...

  • Cisco Systems 6500 - page 854

    2-805 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show l2pr otocol-t unnel sta ti st ic s show l2pro tocol -tunnel sta tistics T o di splay Lay er 2 pr otoc ol tu nneli ng stati sti cs for a por t or ra nge or po rts, use th e show l2protocol-tunnel stat ...

  • Cisco Systems 6500 - page 855

    2-806 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show l2 protoco l-tunnel stati stics Port VTP Frames Encap VTP Frames De-encap ------------------------ -------------------- -------------------- 7/1 0 0 7/2 0 0 Console> This exam ple shows how t ...

  • Cisco Systems 6500 - page 856

    2-807 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show lacp- channel show lacp-cha nnel T o di splay inf or matio n abo ut the Li nk Aggr egation Contr ol Pr otoc ol ( LACP) channe l, use the show lacp-channel comman d. show l acp-channel show lacp-chann ...

  • Cisco Systems 6500 - page 857

    2-808 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show l acp-channel Command Mode s Normal. Usage Guid el i nes If you do not speci fy the admi n-key v alue, infor mation ab out all LA CP channels is displayed. If you do not speci fy the channel_id ...

  • Cisco Systems 6500 - page 858

    2-809 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show lacp- channel This example shows how to display L A C P T x and Rx sta tistics for ports tha t are assigned to administ rative k ey 152: Console> show lacp-channel group 152 statistics Port Admin ...

  • Cisco Systems 6500 - page 859

    2-810 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show l acp-channel This example shows how to display the outgo ing port for th e specified source and destination IP addresses: Console> (enable) show lacp-channel hash 808 172.20.32.10 172.20.32. ...

  • Cisco Systems 6500 - page 860

    2-811 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show lcper roracti on show lcperroract ion T o di splay ho w yo ur syst em handl es LCP e rrors wh en a modul e repo rts an ASI C probl em to the Netwo rk Managem ent Proce ssor (NM P), us e t he show lcp ...

  • Cisco Systems 6500 - page 861

    2-812 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show lda show lda T o displa y the ASLB conf iguration informati on, use the sho w lda comman d. show lda [ committed | uncommitted ] show lda mls entry show lda mls entry [ de st ina ti on ip_addr_s ...

  • Cisco Systems 6500 - page 862

    2-813 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show lda Command Mode s Normal. Usage Guid el i nes This c omm and is suppor ted on ly o n sw itc he s configu red w ith th e Supe r visor En gine 1 wi th L aye r 3 Switching Engine WS-F6K-PFC (Pol icy Fe ...

  • Cisco Systems 6500 - page 863

    2-814 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show lda LD Router Side: --------------- Router and LD are on VLAN 110 LD is connected to switch port 4/26 on VLAN 110 LD Server Side: --------------- Server(s) and LD are on VLAN 105 LD is connected ...

  • Cisco Systems 6500 - page 864

    2-815 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show lda This example shows ho w to di splay the num ber of active ASLB MLS entri es: Console> (enable) show lda mls statistics count LDA active shortcuts:20 Console> (enable) This exa mple shows ho ...

  • Cisco Systems 6500 - page 865

    2-816 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show localuser show localu ser T o display the local user ac counts for a switch, use the show loca luser comma n d. show localuser [ name ] Syntax Descript ion Defaults Thi s command has no de fault ...

  • Cisco Systems 6500 - page 866

    2-817 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show log show log T o display the error log for the system or a specif ic module, use the show log comman d. show log [ mod ] show log dump [ - count ] Syntax D escr i pti on Defaults Thi s command has no ...

  • Cisco Systems 6500 - page 867

    2-818 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show log NVRAM log: 01. 1/25/2000,17:39:10: convertCiscoMIB:PreSac(0) checksum failed: 0xFFFF(0xE507 ) Module 3 Log: Reset Count: 14 Reset History: Wed Mar 22 2000, 10:35:54 Fri Mar 17 2000, 15:36:57 ...

  • Cisco Systems 6500 - page 868

    2-819 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show log com mand show log comma nd T o dis play th e comm and lo g entries, u s e th e show log command command. show log command [ mod ] Syntax D escr i pti on Defaults Thi s command has no de fault set ...

  • Cisco Systems 6500 - page 869

    2-820 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show l ogging show loggin g T o display the system m essage log info rma tion, u se the show logging command . show logging [ noalias ] Syntax Descript ion Defaults Thi s command has no de fault sett ...

  • Cisco Systems 6500 - page 870

    2-821 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show loggi ng qos 7 7 radius 7 7 rsvp 7 7 security 7 7 snmp 7 7 spantree 7 7 sys 7 7 tac 7 7 tcp 7 7 telnet 7 7 tftp 7 7 udld 7 7 vmps 7 7 vtp 7 7 0(emergencies) 1(alerts) 2(critical) 3(errors) 4(warnings ...

  • Cisco Systems 6500 - page 871

    2-822 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show log ging buff er show loggin g buffer T o display sy stem m essages fro m the internal buf fer , use the show log ging buffer co mmand. show logging buffer [ – ] [ number_of _mes sages ] Synta ...

  • Cisco Systems 6500 - page 872

    2-823 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show loggi ng callho me show loggin g callhome T o display the conf igured CallHo me settings, use the sho w logging callhome command. show logging callhome Syntax D escr i pti on This comm a nd ha s n o ...

  • Cisco Systems 6500 - page 873

    2-824 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show logging callhome Relat e d Commands clear lo gging callhome clear logging call home fr om clear logging callhome reply-t o show logging callhome se verity clear logg ing ca llho me sm tp-s erver ...

  • Cisco Systems 6500 - page 874

    2-825 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show lo ggi ng callho me de st ination show loggin g callhome destination T o display the add resses set to re ceiv e CallHome sy slog message s, use the show logging callhome destination com mand. show l ...

  • Cisco Systems 6500 - page 875

    2-826 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show logging callhome destination Relat e d Commands clear lo gging callhome set logging callhome set logging callhome destina tion set logging callhome fr om set logging callhome r eply-to set loggi ...

  • Cisco Systems 6500 - page 876

    2-827 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show loggi ng callho me from show loggin g callhome from T o display the From address in the CallHome syslog messages, use the show loggi ng cal lhome from comm and. show logging callhome fr om Syntax D e ...

  • Cisco Systems 6500 - page 877

    2-828 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show logg ing call home reply- to show loggin g callhome repl y-to T o display th e Reply-to addre ss in the Cal lHome syslog messag es, use the show logging callhome rep l y -t o command. show loggi ...

  • Cisco Systems 6500 - page 878

    2-829 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show lo ggi ng call ho me se ve rity show loggin g callhome severity T o display the severi ty lev el at which point syslog messages a re sent to specified destination addresses, use the show logging call ...

  • Cisco Systems 6500 - page 879

    2-830 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show logg ing callh ome smtp-s erver show loggin g callhome smtp-server T o display the SMTP serv ers set for CallHome to use when routing messa ges, use the show logging callh ome s mtp- server co m ...

  • Cisco Systems 6500 - page 880

    2-831 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show mac show mac T o display MA C counters, use the show mac comman d. show mac [ utilization ] [ mod [/ port ]] Syntax D escr i pti on Defaults Thi s command has no de fault setti ngs. Comma nd T ypes S ...

  • Cisco Systems 6500 - page 881

    2-832 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show ma c -------- ---------- ---------- ---------- ----------- 3/1 0 0 0 0 Port Last-Time-Cleared ----- -------------------------- 3/1 Wed Jan 14 2004, 07:59:35 Console> This c omma nd shows how ...

  • Cisco Systems 6500 - page 882

    2-833 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show mac Rcv -Octet Numbe r of octe t frames re ceived on the port. Xmit-Octet Nu mber o f octet f rames tran smitted on the port. Rcv-Un icast Number of unic ast frames recei ved on the po rt. Rcv-Br oad ...

  • Cisco Systems 6500 - page 883

    2-834 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show microco de show microcode T o displ ay the version of the microco de and the modu le version info rmation, use the show microco de comm and. sho w micr ocode Syntax Descript ion This c omm and h ...

  • Cisco Systems 6500 - page 884

    2-835 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show ml s show mls T o display MLS Layer 3 packet inf ormation in t h e MLS-ba sed Catalyst 6500 series swi tches, use the show mls com mand. show mls Syntax D escr i pti on This comm a nd ha s n o keywor ...

  • Cisco Systems 6500 - page 885

    2-836 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show mls MSFC ID Module XTAG MAC Vlans --------------- ------ ---- ----------------- -------------------- 52.0.0.3 16 1 00-10-29-8a-0c-00 1,10 Console> This e xample sho ws the display if you ente ...

  • Cisco Systems 6500 - page 886

    2-837 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show ml s acl-ro ut e show mls acl-route T o display summari e s from A CL for r o uting in the MLS-based Cata lyst 6500 series switches, use the show mls acl-r oute command. show mls acl-r oute Syntax D ...

  • Cisco Systems 6500 - page 887

    2-838 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show ml s cef e xac t-r ou te show mls cef exact -route To show the exact path that is tak en from a specific IP source addres s to a specific IP destination add ress, use the show mls cef exact-rout ...

  • Cisco Systems 6500 - page 888

    2-839 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show ml s c e f in te rfa ce show mls cef interface T o display MSFC VLAN information, use the sh ow mls cef i nterf ace command. show mls cef inte rface [ vlan ] Syntax D escr i pti on Defaults Thi s com ...

  • Cisco Systems 6500 - page 889

    2-840 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show mls cef interface This e xample sho w ho w to displa y information fo r a specif ic CEF VLAN: Console> (enable) show mls cef interface 46 Module 16: vlan 46, IP Address 46.0.0.99, Netmask 255 ...

  • Cisco Systems 6500 - page 890

    2-841 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show ml s cef mac show mls cef mac T o displ ay bott om inter face adap ter (BIA ) physical M A Cs an d HSRP a ctive virtu al MACs associated with the d esign ate d MSFC 2, use th e show mls cef mac co mm ...

  • Cisco Systems 6500 - page 891

    2-842 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show mls cef rpf show mls cef rpf T o disp lay reverse path f orwarding (RPF) mo de info rmati on, stat istics, and VLA N tabl e conte nt, use the show mls cef rpf command. show mls cef rpf { mode | ...

  • Cisco Systems 6500 - page 892

    2-843 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show ml s cef rpf This exam ple shows how to displ ay R P F VLA N ta ble cont ent : Console> show mls cef rpf vlan-table Index VLANs ----- ------------------- 0 1 2 3 1 unused 2 unused 3 unused Console ...

  • Cisco Systems 6500 - page 893

    2-844 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show mls cef summary show mls cef summary T o display a summary of CEF table information , use the show mls cef summary comman d. show mls cef summary Syntax Descript ion This c omm and ha s no a rgu ...

  • Cisco Systems 6500 - page 894

    2-845 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show mls cef summary Relat e d Commands clear mls cef sho w mls cef interfa ce show mls cef mac sho w mls entry cef IPX r out e e ntri es N umbe r of IP X ro ut e en t ries. IP load shar ing entries Numbe ...

  • Cisco Systems 6500 - page 895

    2-846 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show mls entry show mls entry T o display state information in the M L S-based Cataly st 6500 series switches, use the sho w mls entry comm and. show mls entry [ mod ] [ short | long ] show mls entry ...

  • Cisco Systems 6500 - page 896

    2-847 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show ml s entry Usage Guid el i nes On swit che s configured wi th the Supe r visor En gine 2 wit h La ye r 3 Sw it chin g Engi ne II ( PFC2), th e display co ntai ns summa rie s d erived from t hree fo r ...

  • Cisco Systems 6500 - page 897

    2-848 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show mls entry The show mls entry com mand disp lays bridge d flows on a Supervisor En gine 1 when bridg ed flow statistics is enabled. The sho w mls statistics ent ry com ma nd di splays bri dged f ...

  • Cisco Systems 6500 - page 898

    2-849 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show ml s entry For destinati on-only flow: Console> (enable) show mls entry ip short Destination-IP Source-IP Prot DstPrt Src Prt Destination-Mac Vlan --------------- --------------- ----- ------ ---- ...

  • Cisco Systems 6500 - page 899

    2-850 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show mls entry 401.0000.0000.0401 - 00-00-04-01-00-00 401 3/1 4633 38676 Total entries: 4 Console> (enable) Console> (enable) show mls entry ipx 16 short Destination-IPX Source-IPX-net Destinat ...

  • Cisco Systems 6500 - page 900

    2-851 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show ml s entry 0.0.0.2 0.0.0.2 2 201 101 cc-cc-cc-cc-cc-cc 2 ARPA 0 0 01:03:21 01:00:51 cccccccc cccccccc 0.0.0.4 0.0.0.4 4 203 X cc-cc-cc-cc-cc-cc 4 ARPA 0 0 01:03:19 01:00:51 cccccccc cccccccc 0.0.0.1 ...

  • Cisco Systems 6500 - page 901

    2-852 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show mls entry cef show mls entry cef T o display CEF and adjacenc y entries (and Tx statistics) for IP resolved entries an d IPX resolved or connect ed entries, us e the show mls entry cef comm and. ...

  • Cisco Systems 6500 - page 902

    2-853 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show ml s entry cef Exam ples This example sho ws how to display information for all CEF entries: Console> (enable) show mls entry cef Mod FIB-Type Destination-IP Destination-Mask NextHop-IP Weight --- ...

  • Cisco Systems 6500 - page 903

    2-854 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show mls entry cef This exam ple sh ows how to displa y adj ace ncy infor mat ion: Console> (enable) show mls entry cef ip adjacency Mod: 16 Destination-IP: 127.0.0.21 Destination-Mask: 255.255.25 ...

  • Cisco Systems 6500 - page 904

    2-855 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show ml s entry cef Relat e d Commands clear mls cef clear mls entry cef sho w mls cef interfa ce show mls cef mac show mls cef summary Encp Next-hop destin ation e ncap sulat ion typ e (ARP A, RA W , SAP ...

  • Cisco Systems 6500 - page 905

    2-856 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show mls entry netflow-route show mls entry netflow-route T o display shortcut informatio n in the MLS-based Catalyst 6500 series switches, use the show mls entry netflow-r oute comman d. show mls en ...

  • Cisco Systems 6500 - page 906

    2-857 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show ml s entry net flow-ro ut e Ente rin g th e destination ke yword speci fies the en tries matc hing the destination IP address specif ication, ent erin g th e source ke yword specif ies the entries ma ...

  • Cisco Systems 6500 - page 907

    2-858 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show mls exc lude proto col show mls exclude protocol T o displa y excluded pr otocols on T CP or UDP f rom being sho rtcuts, u se the show mls exclud e prot ocol comm and. show ml s exclude pr oto c ...

  • Cisco Systems 6500 - page 908

    2-859 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show mls mu lticast show mls multicast T o display IP multicast MLS inform ation, use the show mls multicast comm and. show ml s multicast show mls multicast entry {[ mod ] [ vlan vlan_id ] [ grou p ip_ad ...

  • Cisco Systems 6500 - page 909

    2-860 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show mls multicast If you disab le DNS, no name c an be specified or shown. A warning message is displayed if you disable the La yer 2 m ulticast protoc ol when the multicast multilaye r switching (M ...

  • Cisco Systems 6500 - page 910

    2-861 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show mls mu lticast This e xample shows h ow to display statistical informa tion on a switch conf igured with the Sup ervis or Engin e 1 with Layer 3 S witc hing Engi ne (WS- F6K- PFC): Console> (enabl ...

  • Cisco Systems 6500 - page 911

    2-862 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show mls multicast This example shows ho w to display IP MM LS entry infor mati on on a switch c onfigured with th e Supervis or En gi ne 1 wi th L ayer 3 Swit ching E ng ine WS-F 6K-PFC: Console> ...

  • Cisco Systems 6500 - page 912

    2-863 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show ml s nde show mls nde T o display NetFlo w Data Export informati on, use the show mls nde comm and. show ml s nde Syntax D escr i pti on This comm a nd ha s n o argume nts. Defaults Thi s command has ...

  • Cisco Systems 6500 - page 913

    2-864 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show mls n etflow-route show mls netflow-route T o display summar ies from NetFlo w for routing in the MLS-based Catalyst 6500 series switch es, use the show mls netflow -route command . show mls net ...

  • Cisco Systems 6500 - page 914

    2-865 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show mls pb r-route show mls pbr-route T o display statistics about polic y-based routing (PBR) traff ic, use the show ml s pbr -route comm and. Syntax D escr i pti on This comm a nd ha s n o keywords or ...

  • Cisco Systems 6500 - page 915

    2-866 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show mls stati stics show mls statistics T o display MLS statistics info rmation in the MLS-based Cata lyst 6500 seri es switches, use the show mls statistics command. show mls statistics pr otocol s ...

  • Cisco Systems 6500 - page 916

    2-867 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show ml s statis t ics Usage Guid el i nes If your syst em is c onfigure d wit h the Sup ervis or E ngine 2 wi th Swi tc hing En gine II (PFC2) , t he show mls statistics ent ry comma nd output displays p ...

  • Cisco Systems 6500 - page 917

    2-868 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show mls stati stics Protocol TotalFlows TotalPackets Total Bytes ------- ---------- -------------- ------------ Telnet 900 630 4298 FTP 688 2190 3105 WWW 389 42679 623686 SMTP 802 4966 92873 X 142 2 ...

  • Cisco Systems 6500 - page 918

    2-869 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show ml s statis t ics Note Th e foll owing command s are ou tput fr om switc hes configu red wit h the Sup ervisor Engin e 1 with Lay er 3 Switchi ng Eng in e WS-F6 K-PFC. The out put from sw itche s con ...

  • Cisco Systems 6500 - page 919

    2-870 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show mls verify show mls verify T o disp lay the Layer 3 error chec king conf igur ation , use the show mls verify command . show mls verify Syntax Descript ion This c omm and ha s no a rgume nts o r ...

  • Cisco Systems 6500 - page 920

    2-871 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show mod ule show module T o disp lay modu l e status a nd i n forma t ion, use the show module co mma nd. For supe rvis or e ngi ne s, the show module command di splays the supe rvis or engine number but ...

  • Cisco Systems 6500 - page 921

    2-872 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s sh ow m o dul e Mod MAC-Address(es) Hw Fw Sw --- -------------------------------------- ------ ---------- -------------- 1 00-30-80-f7-a5-06 to 00-30-80-f7-a5-07 1.0 5.2(1) 6.1(0.12) 00-30-80-f7-a5-0 ...

  • Cisco Systems 6500 - page 922

    2-873 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show mod ule This exam ple sh ows the dis play f or a sup er visor e ngine 720: Console> show module 6 Mod Slot Ports Module-Type Model Sub Status --- ---- ----- ------------------------- ------------- ...

  • Cisco Systems 6500 - page 923

    2-874 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show moduleinit show moduleinit T o d ispl ay c onte nts of the i nform ation stor e d in the sy stem m odule i n itiatio n lo g, use the show moduleinit co mmand. show moduleinit [ mod ] [ log lognu ...

  • Cisco Systems 6500 - page 924

    2-875 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show mod ule init Success_Exit State 2: Entry/Exit/Elapse Time: 14721/14721/0 Success State 3: Entry/Exit/Elapse Time: 14721/32223/17502 Console> Ta b l e 2 - 5 3 describes the possible fi elds in the ...

  • Cisco Systems 6500 - page 925

    2-876 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show msfc autostate show msfcautosta te T o display the Multilayer Switc h Feature Card (MSFC) auto port state, use the show msfcautosta te comm and. show msfcauto state Syntax Descript ion This c om ...

  • Cisco Systems 6500 - page 926

    2-877 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show ms m aut ostate show msmautosta te T o display t he current status of the li ne protocol state determination of the MSMs due to Catalyst 6500 series switc h port sta te ch ange s, use the show msmaut ...

  • Cisco Systems 6500 - page 927

    2-878 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show multicast group show multi cast group T o display the multicast group conf iguration, use the show multicast group comm and. show multicast group [ mac_addr ] [ vlan _id ] Syntax Descript ion De ...

  • Cisco Systems 6500 - page 928

    2-879 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show mult icast gr oup Relat e d Commands clear multi cast router set multicast router show multicast r outer CoS CoS v alue . Destination Ports or VCs List of all the ports that be lo ng to this multica ...

  • Cisco Systems 6500 - page 929

    2-880 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show multicast group count show multi cast group coun t T o show the total count of multicast addresses (g roups) in a VLAN, use th e s how multicast group c ount comm and. show multicast gr oup coun ...

  • Cisco Systems 6500 - page 930

    2-881 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show mul ticast pr ot ocols st atus show multicast protocols status T o display the status of Layer 2 multicast pro tocol s on the switch, use the sho w multi cast prot ocols status comma nd. sho w multi ...

  • Cisco Systems 6500 - page 931

    2-882 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show multicast router show multicast router T o displa y the port s that have IGMP or RGMP -cap able rou ters assigne d to them, use the show multicast rou t er command. show multicast r outer { igmp ...

  • Cisco Systems 6500 - page 932

    2-883 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show mul ti ca st router Ta b l e 2 - 5 5 descr ibes the f ields in the show multic a st r outer command outp ut. Relat e d Commands set igmp set multicast router set rgmp show multicast group show multic ...

  • Cisco Systems 6500 - page 933

    2-884 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show multicast v3-group show multicast v3-group T o di splay IGM P version 3 in for mati on ba sed on grou p I P a ddre ss, use t he show mu lti cast v3 -gro up comm and. show multicast v3-group [ vl ...

  • Cisco Systems 6500 - page 934

    2-885 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show ne ts tat show netstat T o display the current ly activ e network connections an d to list statistics for the v arious protocols in the TCP/IP , use the show netstat comman d. sho w netsta t [ tcp | ...

  • Cisco Systems 6500 - page 935

    2-886 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show net stat 69 duplicate acks 0 acks for unsent data 3468 packets (15367 bytes) received in-sequence 12 completely duplicate packets (20 bytes) 0 packets with some dup. data (0 bytes duped) 4 out-o ...

  • Cisco Systems 6500 - page 936

    2-887 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show ne ts tat This exam ple sh ows how to displ ay U DP st at istic s: Console> show netstat udp udp: 0 incomplete headers 0 bad data length fields 0 bad checksums 0 socket overflows 1116 no such port ...

  • Cisco Systems 6500 - page 937

    2-888 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show net stat Ta b l e 2 - 5 7 descri bes the f ields in the show netst at udp comman d o ut pu t. This example shows how to display I P stat istics: Console> show netstat ip ip: 76894 total packe ...

  • Cisco Systems 6500 - page 938

    2-889 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show ne ts tat This example shows how to display I CMP sta tistics: Console> show netstat icmp icmp: Redirect enabled 0 calls to icmp_error 0 errors not generated 'cuz old message was icmp Output ...

  • Cisco Systems 6500 - page 939

    2-890 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show net stat This exam ple sh ows how to displa y the IP r out ing ta ble: Console> show netstat routes DESTINATION GATEWAY FLAGS USE INTERFACE default 172.16.1.201 UG 6186 sc0 172.16.0.0 172.16. ...

  • Cisco Systems 6500 - page 940

    2-891 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show ne ts tat Ta b l e 2 - 6 1 descr ibes the f ields in the sho w netsta t inte rface comman d output. Relat e d Commands set interface set ip route T able 2-61 sho w netstat int erf ace Command O utput ...

  • Cisco Systems 6500 - page 941

    2-892 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show ntp show ntp T o displa y the curren t NTP status, us e the show ntp command . show ntp Syntax Descript ion This c omm and ha s no a rgume nts o r keywords. Defaults Thi s command has no de faul ...

  • Cisco Systems 6500 - page 942

    2-893 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show ntp Relat e d Commands clear ntp ser ver set ntp broadcastclie nt set ntp broadcastdelay set ntp client set ntp serv er ...

  • Cisco Systems 6500 - page 943

    2-894 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show pbf show pbf T o display PBF-related information , use the show pbf comman d. show pbf [{ adjace ncy | statist ics | map } [ adj_na me ]] Syntax Descript ion Defaults Thi s command has no de fau ...

  • Cisco Systems 6500 - page 944

    2-895 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show pb f This exam ple sh ows how to displ ay a dja cency in forma ti on for a dja cency a _1 : Console> show pbf adj a_1 Index DstVlan DstMac SrcMac Name --------------------------------------------- ...

  • Cisco Systems 6500 - page 945

    2-896 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show pbf Relat e d Commands clear pbf set pbf ...

  • Cisco Systems 6500 - page 946

    2-897 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show pb f-ma p show pbf-map T o display PBF map information, use the show pbf- map co mmand . show pbf-map { vla n | config } Syntax D escr i pti on Defaults Thi s command has no de fault setti ngs. Comma ...

  • Cisco Systems 6500 - page 947

    Chapter 2 Ca talyst 6 500 Series Swi tch and ROM M onitor Comm ands show port 2-898 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 22 show port T o disp lay port st atus infor mation, us e the show port comm and. show port [ mod [ /port ]] Syntax Descript ion Defaults Thi s command has no de fault setti ngs. Comma nd T yp ...

  • Cisco Systems 6500 - page 948

    2-899 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt Exam ples Th is example shows how to display the status an d counte rs for a speci fic module and por t: Console> show port 2/1 * = Configured MAC Address Port Name Status Vlan Duplex Speed ...

  • Cisco Systems 6500 - page 949

    2-900 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port Port Security Violation Shutdown-Time Age-Time Max-Addr Trap IfIndex ----- -------- --------- ------------- -------- -------- -------- ------- 9/5 disabled shutdown 0 0 1 disabled 126 Port ...

  • Cisco Systems 6500 - page 950

    2-901 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt 7/8 enable 00-10-7b-00-0a-5f (Port host processor not online) Port Call-Manager(s) DHCP-Server TFTP-Sever Gateway -------- ----------------- --------------- --------------- --------------- 7/1 ...

  • Cisco Systems 6500 - page 951

    2-902 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port 3/8 onhook 1 full 64k FXS 3/9 onhook 1 full 64k FXS 3/10 onhook 1 full 64k FXS 3/11 onhook 1 full 64k FXS 3/12 onhook 1 full 64k FXS 3/13 onhook 1 full 64k FXS 3/14 onhook 1 full 64k FXS 3/ ...

  • Cisco Systems 6500 - page 952

    2-903 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt Ta b l e 2 - 6 3 describe s the possib le fields (de pending on the p ort type q ueried ) in the show port co mman d output. T able 2-63 sho w port Command O utput Fields Field Description Port ...

  • Cisco Systems 6500 - page 953

    2-904 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port Unde rSize Numbe r of received frames less th an 64 octets long (but are otherw ise wel l-form ed). Single-Coll Number of time s one collision o ccurred before t h e port transmitted a fram ...

  • Cisco Systems 6500 - page 954

    2-905 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt Relat e d Commands set port disable set port enable show port status Lem-Re j-Ct Number of times a c o nnec tion w as rejected becau se of e xcessi ve LEM errors . Last-Time-Cleared Last time t ...

  • Cisco Systems 6500 - page 955

    2-906 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show po rt arp- inspect ion show port a rp-inspection T o d isplay the dro p thr eshol d an d shutdown t hres hol d for sp ec ific por ts, u se the show port arp-inspection comman d. show port a rp-i ...

  • Cisco Systems 6500 - page 956

    2-907 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt au xiliaryvl an show port auxiliaryvlan T o display the port auxiliary VLAN status for a specif ic port, use th e sho w port au xiliar yvlan comm and. sho w port auxili aryvla n { vlan | untagg ...

  • Cisco Systems 6500 - page 957

    2-908 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port au xiliaryv lan This exam ple sh ows how to displa y the status of t he sw itch tha t d oes no t send any aux ilia ry V LAN information in the CDP packets: Console> (enable) show port au ...

  • Cisco Systems 6500 - page 958

    2-909 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt br oadcas t show port b roadcast T o display broadcast information, use the show port br oadcast comma nd . show port broadcast [ mod [ /port ]] Syntax D escr i pti on Defaults Thi s command ha ...

  • Cisco Systems 6500 - page 959

    2-910 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port br oad ca st Relat e d Commands set port broadcast T otal-Drop Nu mber o f broadca st, multicast, and unicast pa ckets dr opped because the port bro adcast l imit was exc eeded. V iolat ion ...

  • Cisco Systems 6500 - page 960

    2-911 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt ca pabilitie s show port c apabilities T o display the capabilit ies on the ports, use the show port capabilit ies comm and. show port capabilities [ mo d [/ port ]] Syntax D escr i pti on Defa ...

  • Cisco Systems 6500 - page 961

    2-912 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port capabilities This e xample shows th e port capabilities on a 48-port 1 0/100B ASE-TX switching services configured -modul e: Console> show port capabilities 3/2 Model WS-X6248-RJ-45 Port ...

  • Cisco Systems 6500 - page 962

    2-913 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt ca pabilitie s This e xample sho ws the port capa bilities on a 24- p ort FXS anal og station inte rface ser vices-conf igured module : Console> show port capabilities 3/2 Model WS-X6624-FXS ...

  • Cisco Systems 6500 - page 963

    2-914 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port capabilities Ta b l e 2 - 6 6 describ es the possibl e fields (dep ending on th e type of port queried ) and the values in th e show port capa bilities c ommand outp ut. T able 2-66 sho w p ...

  • Cisco Systems 6500 - page 964

    2-915 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt ca pabilitie s Relat e d Commands set port broadcast set port channel set po rt s ec u rity set port spee d set spantree portf ast set trunk show port show port voice active ...

  • Cisco Systems 6500 - page 965

    2-916 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s sho w po r t cd p show po rt cd p T o display the port CDP enable state and the message interv al, use the show port cdp command . show port cdp [ mod [ /port ]] Syntax Descript ion Defaults Thi s co ...

  • Cisco Systems 6500 - page 966

    2-917 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt cd p Relat e d Commands set cdp show cdp ...

  • Cisco Systems 6500 - page 967

    2-918 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port c hannel show port c hannel T o disp lay Ether Chan n el inf ormati on, us e the show port channel command. show port channel [ all | mod [ /port ]] [ statistics] show port channel [ all | ...

  • Cisco Systems 6500 - page 968

    2-919 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt ch annel Exam ples Th is exampl e sh ows how to displ ay E the rne t ch ann eli ng i nfo rmat ion fo r modu le 1: Console> show port channel 1 Port Status Channel Admin Ch Mode Group Id ---- ...

  • Cisco Systems 6500 - page 969

    2-920 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port c hannel Port Port Portfast Port Port priority vlanpri vlanpri-vlans ----- -------- -------- ------- ------------------------------------------------ 1/1 32 disabled 0 1/2 32 disabled 0 Por ...

  • Cisco Systems 6500 - page 970

    2-921 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt ch annel 3/3 enabled normal disabled 3/4 enabled normal disabled Console> Console> (enable) show port channel 1 info gvrp Port GVRP GVRP GVRP status registeration applicant ----- -------- ...

  • Cisco Systems 6500 - page 971

    2-922 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port c hannel Speed S pee d s etti ng for t he por t (a uto, 1 0, 10 0, 10 00). Dupl ex Duplex setti ng for the por t (auto, ful l, half). Vlan VLAN to which t h e port belongs. Port priority Pr ...

  • Cisco Systems 6500 - page 972

    2-923 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt ch annel Relat e d Commands set port channel show channel sho w chann el gr oup GVRP regist ration Stat us of the ad ministra tive control of an outbo und port (nor mal, fixed, forbidden). Qos- ...

  • Cisco Systems 6500 - page 973

    2-924 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port c ops show port c ops T o display COPS informat ion on all or individual port s, use the s how port cops command . show po rt co ps [ mod [ /port ]] Syntax Descript ion Defaults Thi s comma ...

  • Cisco Systems 6500 - page 974

    2-925 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt co ps This example shows how to display COPS informa tion fo r a specific port: Console> show port cops 1/1 Port Admin Roles Oper Roles ------ ------------------------------- --------------- ...

  • Cisco Systems 6500 - page 975

    2-926 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show por t count ers show port c ount ers T o sho w all the counters for a port, u se the show port counters command. show port count ers [ mod [ /port ]] Syntax Descript ion Defaults Thi s command h ...

  • Cisco Systems 6500 - page 976

    2-927 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt co unters Ta b l e 2 - 7 0 describ es the possib le fields (de pending on the port t ype que ried) in th e show port count ers comm an d o utpu t. Relat e d Commands clear co unters show port T ...

  • Cisco Systems 6500 - page 977

    2-928 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s sh ow po rt debo u nc e show port d ebounce T o displa y whether the port debo unce timer s are enabled or disable d, use the show port debounce comm and. show port debounce [ mod | m od/ port ] Synt ...

  • Cisco Systems 6500 - page 978

    2-929 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt do t1q-all-ta gged show port d ot1q-all-tagged T o sho w the status of the dot1q-a ll-tagged featur e on all or specif ic ports, use the show port dot1q-all-tagged com mand. show port dot1q-all ...

  • Cisco Systems 6500 - page 979

    2-930 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port do t1q-eth ertype show port d ot1q-ethertyp e T o s how the stat us of t he 8 02. 1q Eth er type field on a ll or spec ific port s, us e t he show port dot1q-ethertype comm and. show port d ...

  • Cisco Systems 6500 - page 980

    2-931 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt do t1qtunn el show port d ot1qtunnel T o d isplay the dot1q tun nel mo de sta tus, use the show port dot1qtunnel command. show port do t1qtunnel [ mod [ /port ]] Syntax D escr i pti on Defaults ...

  • Cisco Systems 6500 - page 981

    2-932 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show po rt dot1x show po rt dot1x T o displa y all the conf igurable and current stat e va lues assoc iated with th e authenti cator port access entity (P AE) and bac kend authentic ator and statisti ...

  • Cisco Systems 6500 - page 982

    2-933 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt do t1x Th i s ex am pl e displays the statis tics of different types of EAP p acket s th at are transmitted and received by the authenticator on a specific port: Console> show port dot1x sta ...

  • Cisco Systems 6500 - page 983

    2-934 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show por t errdi sable-t imeout show port e rrdisable-ti meout T o displ ay the c onfiguration and st atus of t he errd isable time out for a particu lar port , use th e show port errdisable -timeout ...

  • Cisco Systems 6500 - page 984

    2-935 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt er rdisable -timeout This e xample sho ws the outp ut for a por t in errdisable d state with the timeout flag disable d and the reason di sabled : Console> show port errdisable-timeout 3/3 P ...

  • Cisco Systems 6500 - page 985

    2-936 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show por t flowcontr ol show port fl owcontrol T o display per-por t status inf ormation and statistics rela ted to fl ow control, use the show port flowcont rol command. sh ow po r t fl ow c on tro ...

  • Cisco Systems 6500 - page 986

    2-937 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt f low c ontrol Ta b l e 2 - 7 1 descr ibes the f ields in the sh ow po rt fl ow c on tro l command outp ut. Relat e d Commands set po rt f lowco n trol T able 2-71 sho w port flow control Co mm ...

  • Cisco Systems 6500 - page 987

    2-938 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port inl ine p owe r show port in linepower T o display the port power admini strati on and opera tional status, use the show p o rt i nl i nep ower comm and. show port inlinepo wer [ mod [ / po ...

  • Cisco Systems 6500 - page 988

    2-939 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt i nli ne power Port Max.Power overcounters absentcounters mWatt mA@42V ----- ------- ----------- --------------- ---------------- 3/1 0 0 0 0 3/2 0 0 0 0 3./3 0 0 0 0 3/4 0 0 0 0 Console> Re ...

  • Cisco Systems 6500 - page 989

    2-940 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s sh ow po rt jumb o show port jumbo T o display th e jumbo fram e setting s for all port s with the feat ure enabled, use the show port jumbo comm an d. show port jumbo Syntax Descript ion This c omm ...

  • Cisco Systems 6500 - page 990

    2-941 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt l 2pr otocol-t unn el show port l2 pro tocol-tun nel T o d isplay L ayer 2 pr ot ocol tu nnel ing info rma tion on a po rt o r ra nge o f por ts, u se the show por t l2protocol-tunnel command . ...

  • Cisco Systems 6500 - page 991

    2-942 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port lacp -channel show port la cp-channel T o display informat ion about LA CP channels by port or module number , use the sho w port lacp-channel comman d. show port la cp-channel [ mod [/ por ...

  • Cisco Systems 6500 - page 992

    2-943 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt l acp -channe l This exam ple sh ows how to displa y LACP channe l inf orm atio n f or all por ts on m odu le 4: Console> show port lacp-channel 4 Port Channel Admin Ch Partner Oper Partner ...

  • Cisco Systems 6500 - page 993

    2-944 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port lacp -channel This exam ple shows how to displ ay L ACP channel st at istic s for po rt 7 on m odule 4: Console> show port lacp-channel 4/7 statistics Port Admin LACP Pkts LACP Pkts Mark ...

  • Cisco Systems 6500 - page 994

    2-945 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt mac show port mac T o displa y port MA C counter i nform ation , use the show port mac comma n d. show port mac [ mod [ / po rt ]] Syntax D escr i pti on Defaults Thi s command has no de fault ...

  • Cisco Systems 6500 - page 995

    2-946 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show p ort mac Ta b l e 2 - 7 2 describes the possible fields in th e show po rt ma c comman d outpu t. Relat e d Commands clear co unters T able 2-72 sho w por t mac Command O utput Fields Field Des ...

  • Cisco Systems 6500 - page 996

    2-947 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt mac -addres s show port mac-add ress T o displa y the MA C address ass ociated with a physic al port or ports, use the show port mac-address comm and. show port ma c-address [ mod [/ port ]] Sy ...

  • Cisco Systems 6500 - page 997

    2-948 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s sh ow po rt mac -ad d re ss . . 5/48 00-d0-d3-33-80-cb Port Mac address ----- ---------------------- 7/1 00-50-54-6c-94-9c 7/2 00-50-54-6c-94-9d 7/3 00-50-54-6c-94-9e 7/4 00-50-54-6c-94-9f 7/5 00-50- ...

  • Cisco Systems 6500 - page 998

    2-949 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt ne gotiati on show port n egotiation T o di splay the link n egotiat ion pro toco l se ttin g f or t he sp ec ified por t, use t he show port negot iati on comm and. show port negotiation [ mo ...

  • Cisco Systems 6500 - page 999

    2-950 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port p rbs show po rt pr bs T o di splay the por ts t hat are runn ing t he Pseu do Rando m Bina ry Seque nce (PRB S) te st a nd t o di spla y the counter v alues for ports on which the test has ...

  • Cisco Systems 6500 - page 1000

    2-951 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt pr otocol show port p rotocol T o v iew proto co l filters co nfigured on the E the rChan ne l por ts , use the show port protocol comma nd. show port protocol [ mod [/ port ]] Syntax D escr i ...

  • Cisco Systems 6500 - page 1001

    2-952 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port qo s show po rt qo s T o display QoS-related inform ation, use the show port qos comman d. show port qo s [ mod [ /po rt ]] Syntax Descript ion Defaults Thi s command has no de fault setti ...

  • Cisco Systems 6500 - page 1002

    2-953 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt qo s Runtime: Port ACL name Type ----- -------------------------------- ---- No ACL is mapped to port 2/1. Console> This e xample sho ws how to display QoS-related information for a single p ...

  • Cisco Systems 6500 - page 1003

    2-954 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port qo s Config: Port ACL name Type ----- -------------------------------- ---- No ACL is mapped to port 4/1. Runtime: Port ACL name Type ----- -------------------------------- ---- No ACL is m ...

  • Cisco Systems 6500 - page 1004

    2-955 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt rsvp show port rsvp T o di splay RSVP i nforma ti on on a per- por t basi s, use the show port rsvp co mmand . sho w port rs vp [ mod [ /port ]] Syntax D escr i pti on Defaults Thi s command ha ...

  • Cisco Systems 6500 - page 1005

    2-956 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show po r t se cur ity show port se curity T o vie w port security conf iguration informatio n and statistics, u se the sho w port se curity co mmand. sho w port security [ mod [ /port ]] sho w port ...

  • Cisco Systems 6500 - page 1006

    2-957 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt s ecu rity Port Secure-Src-Addrs Age-Left Last-Src-Addr Shutdown Shutdown-Time-Left ---- ----------------- -------- ----------------- -------- ------------------ 4/1 00-11-22-33-44-55 60 00-11- ...

  • Cisco Systems 6500 - page 1007

    2-958 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show po r t se cur ity This e xample shows ho w to display security statistical informati o n for a specific mod ule: Console> (enable) show port security statistics 2 Port Total-Addrs Maximum-Add ...

  • Cisco Systems 6500 - page 1008

    2-959 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt s pan tree show port sp antree T o v iew port spa nnin g t ree in for ma tio n, use the show port spantree command. sho w port sp antree [ mod [ /port ]] Syntax D escr i pti on Defaults Thi s c ...

  • Cisco Systems 6500 - page 1009

    2-960 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port sta tus show port st atus T o disp lay port st atus infor mation, us e the show port sta tus co mma nd . show port s tatus [ mo d [ /port ]] Syntax Descript ion Defaults Thi s command has n ...

  • Cisco Systems 6500 - page 1010

    2-961 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt sync-re start-de lay show port sync-restart-delay T o display a port’ s synchronization restar t delay , use the show port sync -res tart-de lay command . sho w port sync-r estart-delay m o d ...

  • Cisco Systems 6500 - page 1011

    2-962 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show po r t tdr show port tdr T o display the results of the T ime Domain Reflectometer (TDR) test on a port , use the show port tdr comm and. show port tdr [ mo d [ /port ]] Syntax Descript ion Defa ...

  • Cisco Systems 6500 - page 1012

    2-963 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt t dr Port Speed Local pair Pair length Remote pair Pair status ---- ------ ---------- ----------------------- ----------- ------------ 5/3 1000 Pair A running tdr test n/a n/a Pair B running td ...

  • Cisco Systems 6500 - page 1013

    2-964 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show po rt trap show port trap T o disp lay port t rap stat us, use the show port trap comman d. show port trap [ mod [ /port ]] Syntax Descript ion Defaults Thi s command has no de fault setti ngs. ...

  • Cisco Systems 6500 - page 1014

    2-965 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt t runk show port trunk T o display port trunk info rmation, use the sho w port trunk co mm and. show port t runk [ mod [ /port ]] Syntax D escr i pti on Defaults Thi s command has no de fault s ...

  • Cisco Systems 6500 - page 1015

    2-966 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show p ort trun k Ta b l e 2 - 7 5 descri bes the f ields in the show port t runk command outpu t. Relat e d Commands set trunk T able 2-75 sho w port tr unk Command Output F ields Field Description ...

  • Cisco Systems 6500 - page 1016

    2-967 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt un icast-f lood show port unicast-flood T o d isplay the run -time c onfigura tion o f the po rt us ing unic ast floo d b lock ing, us e the show port unicast-flood comm and. show port unicast ...

  • Cisco Systems 6500 - page 1017

    2-968 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show po rt voice show port voice T o display vo ice port informat ion, use the show po rt voi ce co mmand . sho w port v oice [ no alias ] Syntax Descript ion Defaults Thi s command has no de fault s ...

  • Cisco Systems 6500 - page 1018

    2-969 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt v oic e Port DNS-Server(s) Domain -------- ----------------- ------------------------------------------------- 7/1 dns-sj3.cisco.c* cisco.com dns-sj4.cisco.c 7/2 dns-sj3.cisco.c* cisco.com dns- ...

  • Cisco Systems 6500 - page 1019

    2-970 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show po rt voice 7/5 10.34.1.11* - 10.34.1.11 10.34.10.1 10.34.16.10 10.34.42.11 (*):Primary Port DNS-Server(s) Domain -------- ----------------- ------------------------------------------------- 7/1 ...

  • Cisco Systems 6500 - page 1020

    2-971 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt voice ac tive show port vo ice active T o displa y acti ve call inform ation on a port, use the show port voice active co mman d. show port voice active [ mo d/po rt ] [ al l | call | conf eren ...

  • Cisco Systems 6500 - page 1021

    2-972 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show por t voice act ive Exam ples T h is ex am p l e s h ow s how t o d i s p l a y a ll calls (regular calls, conference calls, an d transcoding calls) in the system: Console> show port voice ac ...

  • Cisco Systems 6500 - page 1022

    2-973 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt voice ac tive Fax Transmit Duration : 332433 Hi Water Playout Delay : 23004 ms Logical If index : 4 Low water playout delay : 234 ms Receive delay : 23423 ms Receive bytes : 2342342332423 Recei ...

  • Cisco Systems 6500 - page 1023

    2-974 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show por t voice act ive Low water playout delay : 234 ms Receive delay : 23423 ms Receive bytes : 2342342332423 Receive packets : 23423423402384 Transmit bytes : 23472377 Transmit packets : 94540 Co ...

  • Cisco Systems 6500 - page 1024

    2-975 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt v oic e fdl show port vo ice fdl T o display the faciliti es data link (FDL) s ta tis ti cs for the specifi e d ports, use the show po rt voice f dl comm and. sho w port v oice f dl [ mod [ /po ...

  • Cisco Systems 6500 - page 1025

    2-976 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show po rt v o ice f dl Ta b l e 2 - 7 6 descri bes the pos sible fields (d epen ding on th e port ty pe queri ed) in t he s h ow p or t voi ce f dl comm an d o utpu t. Relat e d Commands sho w port ...

  • Cisco Systems 6500 - page 1026

    2-977 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt v oic e interfa ce show port vo ice interf ace T o d i s p l a y t h e port vo ice interface conf iguration, u s e t h e show port v o ice interfac e command. show port voice interf ace [ mod [ ...

  • Cisco Systems 6500 - page 1027

    2-978 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port vtp show port vtp T o display the status of VLA N T runk Pro tocol (VT P) on a per-port basis, use the show port vtp comm and. show port vtp [ mod [/ port ]] Syntax Descript ion Defaults Th ...

  • Cisco Systems 6500 - page 1028

    2-979 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show po rt v tp 3/16 enabled 3/17 enabled 3/18 enabled 3/19 enabled 3/20 enabled 3/21 enabled 3/22 enabled 3/23 enabled 3/24 enabled 3/25 enabled 3/26 enabled 3/27 enabled 3/28 enabled 3/29 enabled 3/30 e ...

  • Cisco Systems 6500 - page 1029

    2-980 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show proc show proc T o display CPU, memory allocatio n, and process utilizatio n information, use the show proc command. show pr oc [ cpu | mem ] Syntax Descript ion Defaults Thi s command has no de ...

  • Cisco Systems 6500 - page 1030

    2-981 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show pro c Memory Pool Utilization Memory Pool Type 1Min 5Min 10Min ---------------- ----- ----- ----- DRAM 49% 49% 49% FLASH 82% 82% 82% NVRAM 49% 49% 49% MBUF 2% 2% 2% CLUSTER 12% 12% 12% MALLOC 15% 15% ...

  • Cisco Systems 6500 - page 1031

    2-982 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show proc 44 -2 16 0 16 Backend_Rx 45 -2 16 0 16 Backend_SM 46 -2 3216 2992 224 Debug Port Coun 47 -2 16 0 16 SysLogTask 48 -2 112 0 112 pinggateA 49 -2 8704 8000 704 cdpd 50 -2 124576 124416 160 cdp ...

  • Cisco Systems 6500 - page 1032

    2-983 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show pro c 5Min A verage me mory poo l usage o ver the last 5-min ute int erv al. 10Mi n A vera ge m em ory pool usage over the la st 10 -min ute i nterval. TTY TTY as soci ated with t he process . Proces ...

  • Cisco Systems 6500 - page 1033

    2-984 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show pro tocolfilter show proto colfilter T o list whether protoco l filte r ing is enabled or disab led, use the show pr otoc olfilter com mand. sho w pro tocol f ilter Syntax Descript ion This c om ...

  • Cisco Systems 6500 - page 1034

    2-985 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show pvla n show pvlan T o s how th e co nfigur at ion fo r a given private VLA N, u se t he show pvlan command. show pvlan [ vlan | primary | isol ated | community | twoway-communit y ] Syntax D escr i p ...

  • Cisco Systems 6500 - page 1035

    2-986 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show pvlan This e xample shows how to display the st atus for all VLANs se t as isolat ed: Console> show pvlan isolated Primary Secondary Secondary-Type Ports ------- --------- -------------- ---- ...

  • Cisco Systems 6500 - page 1036

    2-987 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show pvla n capabi li ty show pvlan capability T o d eterm i ne w he the r or not a por t c an be ma de a p riv ate port, u se the show pvlan capability comm and. show pvlan capability mod/port Syntax D e ...

  • Cisco Systems 6500 - page 1037

    2-988 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show pvlan capability Console> (enable) show pvlan capability 5/3 Ports 5/1 - 5/12 are in the same ASIC range as port 5/3. Port 5/3 cannot be made a private vlan port due to: --------------------- ...

  • Cisco Systems 6500 - page 1038

    2-989 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show pvla n mappin g show pvlan mappi ng T o s how the private VLAN m appi ng s c onfigure d o n promi sc uous po rts, use t h e show pvlan mapping comm an d. show pvlan mapping [ priv ate_ vlan | mod/ po ...

  • Cisco Systems 6500 - page 1039

    2-990 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show pvlan mapp ing Relat e d Commands clear co nfi g pvlan clear pvlan mapping clea r vlan set pvlan set pvlan mapping set vlan show pvlan mapping show vlan ...

  • Cisco Systems 6500 - page 1040

    2-991 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show qo s acl ed it buf fer show qos acl editbuffer T o display A CL names in the edit buf fer , use the show qo s acl editbuffer command. show qos acl editbuffer Syntax D escr i pti on This comm a nd ha ...

  • Cisco Systems 6500 - page 1041

    2-992 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show qos acl info show qos acl in fo T o display QoS A C L information, use the show qos acl info comman d. show qos acl info default-action { ip | ipx | mac | all } show qos acl inf o runtime { ac l ...

  • Cisco Systems 6500 - page 1042

    2-993 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show qo s acl info 2. set qos acl ip my_ip_acl trustdscp microflow my-micro aggregate agg tcp 173.22.3.4 255.0.0.0 eq port 19 173.22.20.1 255.255.255.0 tos 5 ACL status: Not Committed Console> (enable) ...

  • Cisco Systems 6500 - page 1043

    2-994 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show qos acl map show qos acl map T o display the ACL mapping inform ation, use the show qos acl map command. show qos acl map { config | runtime } { acl_n ame | mod/po rt | vlan | all } Syntax Descr ...

  • Cisco Systems 6500 - page 1044

    2-995 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show qo s acl map This e xample shows h ow to display information for a specif ic AC L: Console> show qos acl map isp1 ACL name Vlan # Ports -------- ---------------- --------------- isp1 2 1/1 Console ...

  • Cisco Systems 6500 - page 1045

    2-996 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show qos acl resource- usage show qos acl resou rce-us age T o disp lay ACL ma nage ment in formati on, us e the show qos acl resour ce-usage comm and. show qos acl r esource-usage Syntax Descript io ...

  • Cisco Systems 6500 - page 1046

    2-997 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show qo s bri dged-m icroflow -polici ng show qos bridged -microflow-p olicing T o disp lay th e VLAN-bri dged pack et- polic ing st atus, u se the sho w qos bridged-packet -policing comm and. show qos br ...

  • Cisco Systems 6500 - page 1047

    2-998 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show qos info show qos info T o display QoS-related inf ormation for a specif ied port, use the sho w qos i nf o com mand. show qos inf o { runtime | co nfig } { mod / port } show qos info conf ig po ...

  • Cisco Systems 6500 - page 1048

    2-999 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show qo s info The num ber pr eceding the p lette r in the port_type valu e (for ex ample, 1p2q2t and 1p1q4t ) determines the threshold in the prio rity queue. The 1p2q1t an d 1p1q8t po rt t ype s a re n ...

  • Cisco Systems 6500 - page 1049

    2-1000 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show qos info This exam ple sh ows how to displ ay a ll Q oS- relat ed NV RA M thr esh old info rmat ion: Console> (enable) show qos info config 2q2t tx QoS setting in NVRAM for 2q2t transmit: Qo ...

  • Cisco Systems 6500 - page 1050

    2-1001 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show qo s info This exam ple sh ows anothe r di splay of the cur rent QoS ru nti me inf orm ation : Console> show qos info runtime 8/1 Run time setting of QoS: QoS is enabled Policy Source of port 8/1 ...

  • Cisco Systems 6500 - page 1051

    2-1002 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show qos info This exam ple shows how to di splay t he cu rrent QoS c onfigurat ion i nfor ma tion: Console> (enable) show qos info config 8/1 QoS setting in NVRAM: QoS is disabled Port 8/1 has 3 ...

  • Cisco Systems 6500 - page 1052

    2-1003 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show qo s info This exam ple shows anothe r di sp lay of the c urre nt QoS c onfigurati on i nf ormat ion : Console> (enable) show qos info config 1p2q2t tx QoS setting in NVRAM for 1p2q2t transmit: Q ...

  • Cisco Systems 6500 - page 1053

    2-1004 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show qos mac-cos show qos mac-cos T o display the cu r rently conf igured QoS-related in formation fo r the MA C address and VLAN pair , use the show qos mac-cos command . show qos mac-cos des t_mac ...

  • Cisco Systems 6500 - page 1054

    2-1005 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show qo s mac-cos Relat e d Commands clea r q o s m a c- co s set qos mac- cos ...

  • Cisco Systems 6500 - page 1055

    2-1006 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show qos map s show qos maps T o d isplay the mappi ng o f d ifferent ma ps, use the show qos maps command. show qos maps { conf ig | runtime } [ cos-dscp- map | ippre c -dscp-map | dscp-cos- map | ...

  • Cisco Systems 6500 - page 1056

    2-1007 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show qo s maps Exam ples Th is exampl e sh ows how to displa y the co s-dscp- map ma p: Console> show qos maps cos-dscp-map CoS - DSCP map: CoS DSCP --- --------------- 0 10 ... 7 52 Console> This ...

  • Cisco Systems 6500 - page 1057

    2-1008 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show qos map s DSCP - CoS map: DSCP CoS --------------- ---- 34-40,60 0 ... 50 7 DSCP policed-dscp map: In-profile DSCP Policed DSCP --------------- ------------- 0-20 0 Console> This exam ple sh ...

  • Cisco Systems 6500 - page 1058

    2-1009 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show qo s policer show qos poli cer T o displ ay micr oflow or a ggreg ate pol icers cu rrentl y conf igured, use the show qos policer comm and. show qos policer { config | runtime } { mi croflo w [ poli ...

  • Cisco Systems 6500 - page 1059

    2-1010 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show qos p olicer This exam ple sh ows how to displa y mi cr oflow polic ing in forma tion: Console> show qos policer config microflow QoS microflow policers: Microflow name Average rate Burst si ...

  • Cisco Systems 6500 - page 1060

    2-1011 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show qo s policy -source show qos policy-source T o d isplay the QoS po licy sour ce i nfor ma tion, use th e show qos policy-source comman d. show qos policy-sour ce Syntax D escr i pti on This comm a n ...

  • Cisco Systems 6500 - page 1061

    2-1012 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show qos rsvp show qos rsvp T o display RSVP information, use the show qos r svp command. show qos rsvp { info | flo w-inf o } Syntax Descript ion Defaults Thi s command has no de fault setti ngs. C ...

  • Cisco Systems 6500 - page 1062

    2-1013 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show qo s statist ics show qos statistics T o displa y the var ious Qo S-related counters for a speci fied por t, use the sh ow qos s tatis tic s co mmand . show qos statistics { mod [ /p ort ]} show qos ...

  • Cisco Systems 6500 - page 1063

    2-1014 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show qos stati stics This e xample shows ho w to display the QoS Layer 3 statistics: Console> show qos statistics l3stats Warning: QoS is disabled. QoS Layer 3 Statistics show statistics since la ...

  • Cisco Systems 6500 - page 1064

    2-1015 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show qo s statist ics export info show qos statistics export info T o displa y QoS data export configurati on and stati stical informat ion, use t he show qos st atistics export inf o comman d. show qos ...

  • Cisco Systems 6500 - page 1065

    2-1016 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show qos stat us show qos status T o d i sp l ay if QoS is enabled on the switch, u s e t he show qo s status comm and. show qos status Syntax Descript ion This c omm and ha s no keywords or argume ...

  • Cisco Systems 6500 - page 1066

    2-1017 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show radi us show radius T o disp lay conf igured RAD IUS parame ters, use the show radius comma n d. show radi us [ noalias ] Syntax D escr i pti on Defaults Thi s command has no de fault setti ngs. Com ...

  • Cisco Systems 6500 - page 1067

    2-1018 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show radius Relat e d Commands set radius attribute set radius deadtime set radius key set radius retransmit set r adi us s erver set radius timeout ...

  • Cisco Systems 6500 - page 1068

    2-1019 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show rate-l im it show rate-limit T o display rate-limiter settings and information , use the show rate-limit comma nd. show rate- limit Syntax D escr i pti on This comm a nd ha s n o keywords or argume ...

  • Cisco Systems 6500 - page 1069

    2-1020 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show rc p show rcp T o display rcp informatio n, use the sho w r cp command . show r cp Syntax Descript ion This c omm and ha s no keywords or argume nts. Defaults Thi s command has no de fault sett ...

  • Cisco Systems 6500 - page 1070

    2-1021 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show reset show reset T o display scheduled reset informa tion, use the show r eset command. show r eset Syntax D escr i pti on This comm a nd ha s n o keywords or argume nts. Defaults Thi s command has ...

  • Cisco Systems 6500 - page 1071

    2-1022 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show rgmp group show rgmp group T o display all multicast grou ps or th e count of multicast g roups that are joined b y RGMP-capable router s, use the show rgmp group command . show r g mp group [ ...

  • Cisco Systems 6500 - page 1072

    2-1023 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show rgm p stat is ti cs show rgmp statistics T o displa y all the RGMP-rel ated statis tics for a gi ven VLAN, use the show rgmp statistics command. show r gmp statistics [ vlan ] Syntax D escr i pti on ...

  • Cisco Systems 6500 - page 1073

    2-1024 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s sho w rs pan show rspan T o display the remote SP AN configura tion, use the show rspan comman d. show rspan Syntax Descript ion This c omm and ha s no keywords or argume nts. Defaults Thi s command ...

  • Cisco Systems 6500 - page 1074

    2-1025 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show rspan Destination : Port 6/1 Rspan Vlan : 906 Admin Source : - Oper Source : - Direction : - Incoming Packets: disabled Learning : - Multicast : - Filter : - ---------------------------------------- ...

  • Cisco Systems 6500 - page 1075

    2-1026 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show runni ng-conf ig show running-con fig T o display the conf iguration informatio n currently runn ing on the switch or the conf iguration for a specif ic A C L, use th e show running-conf ig co ...

  • Cisco Systems 6500 - page 1076

    2-1027 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show run ni ng-conf ig # ***** NON-DEFAULT CONFIGURATION ***** ! ! #time: Mon Jun 11 2001, 08:22:17 ! #version 6.3(0.56)PAN ! ! #! #vtp set vtp domain dan set vtp mode transparent set vlan 1 name default ...

  • Cisco Systems 6500 - page 1077

    2-1028 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show runni ng-conf ig set vlan 11 3/2 ! #module 4 empty ! #module 5 : 0-port Switch Fabric Module ! #module 6 empty ! #module 7 empty ! #module 8 empty ! #module 9 empty ! #module 15 empty ! #module ...

  • Cisco Systems 6500 - page 1078

    2-1029 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show s ecur ity ac l show security acl T o displa y the conte nts of the VACL that are c u rrently c o nfigured or last c o mmitted t o NVRAM an d hardwa re, use th e show security acl comman d. show sec ...

  • Cisco Systems 6500 - page 1079

    2-1030 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show secu rity acl This e xample shows h ow to display VACLs in the edit buffer: Console> show security acl editbuffer ACL Type Status -------------------------------- ---- ------------------- ip ...

  • Cisco Systems 6500 - page 1080

    2-1031 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show s ecur ity ac l set security acl ip ip1 --------------------------------------------------- arp permit 1. redirect a_1 ip host 44.0.0.1 host 43.0.0.1 2. redirect a_2 ip host 44.0.0.2 host 43.0.0.2 3 ...

  • Cisco Systems 6500 - page 1081

    2-1032 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show security acl arp-inspection show security acl a rp-inspection T o di splay A dd ress R esolu tion Pr otoc ol (ARP) i nspec tion i nfor mat ion, use the show security acl arp-inspection comman d ...

  • Cisco Systems 6500 - page 1082

    2-1033 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show s ecur ity acl ca pture-p ort s show security acl c apture-ports T o display the c apture port list , use the show s ecurity acl ca pture- ports co mmand. sho w securi ty acl ca pture-por ts Syntax ...

  • Cisco Systems 6500 - page 1083

    2-1034 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show security acl feature ratelimit show security acl fe ature ratelimit T o display the rate limit for the numbe r of packets tha t are sent to the CPU on a global basis and to display the feat ure ...

  • Cisco Systems 6500 - page 1084

    2-1035 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show s ecur ity ac l l og show security acl lo g T o d isplay V A C L log i n forma tio n, use the show security acl log comma nd. show security acl log co nfig show security acl log fl ow pr otoc ol { s ...

  • Cisco Systems 6500 - page 1085

    2-1036 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show security acl log Defaults Thi s command has no de fault setti ngs. Comma nd T ypes Swit ch co mman d. Command Mode s Pri vile ged. Usage Guid el i nes This c omma nd is sup por ted on sy stem s ...

  • Cisco Systems 6500 - page 1086

    2-1037 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show s ecur ity ac l l og reas sembly- timeo ut, redi rect, rout er-advertis ement , router-sol icitati on, sour ce-que nch, source-ro u te-fail ed, time-e xceeded , timestamp-rep ly , timestamp-request, ...

  • Cisco Systems 6500 - page 1087

    2-1038 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show security acl map show security acl map T o display VACL-to-V LAN mapping for a spe cified VACL or VLAN, use the show security acl map comm and. show security acl map acl_name show security acl ...

  • Cisco Systems 6500 - page 1088

    2-1039 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show s ecur ity ac l re source -usage show security acl resou rce-us age T o disp lay VACL ma nagement infor matio n, use the sh ow securit y acl resour ce-usage co mmand. show security acl r esource-usa ...

  • Cisco Systems 6500 - page 1089

    2-1040 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show snmp show snmp T o display SNMP informat ion, use the show snmp command . show snmp [ no alias ] Syntax Descript ion Defaults Thi s command has no de fault setti ngs. Comma nd T ypes Swit ch co ...

  • Cisco Systems 6500 - page 1090

    2-1041 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show snm p Chassis Alias:my chassis Traps Enabled: None Port Traps Enabled:None Community-Access Community-String ---------------- -------------------- read-only public read-write private read-write-all ...

  • Cisco Systems 6500 - page 1091

    Chapter 2 Ca talyst 6 500 Series Swi tch and ROM M onitor Comm ands show snmp access 2-1042 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 22 show snmp a ccess T o displa y SNMP access inf ormation, use the show snmp access command . show snmp access [ volatile | non vol atile | re a d- o n l y ] show snmp access [ -hex ] ...

  • Cisco Systems 6500 - page 1092

    2-1043 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show snm p ac cess • V ersion 2 (SNMPv2c)—The seco nd release of SNMP , d escribed in RFC 1902, has additions and enhanc emen ts to dat a types, co unter si ze, and pro tocol operati ons. • V ersio ...

  • Cisco Systems 6500 - page 1093

    2-1044 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show snmp access- list show snmp access-list T o disp lay SNMP a ccess li st numbe rs and co rresp onding I P addre sses and I P masks , use the show snmp access-list command. Syntax Descript ion Th ...

  • Cisco Systems 6500 - page 1094

    2-1045 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show snm p bu ffer show snmp buffer T o disp lay th e number of SNMP pack ets which ca n be sav ed in the SNMP UDP so cket recei ve b uffe r , use the show snmp b uffer comm an d. show snmp b uffer Synta ...

  • Cisco Systems 6500 - page 1095

    2-1046 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show snmp community show snmp community T o display SNMP conte xt information, use the show snmp community comman d. show snmp community show snmp community [ read - on l y | volati le | non volatil ...

  • Cisco Systems 6500 - page 1096

    2-1047 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show snmp community This exam ple sh ows the d ispl ay ou t put when yo u e nte r t he show snmp community comman d for the read-o nly , the re ad-w rite, an d the re ad-w rite-a ll comm unity st rings i ...

  • Cisco Systems 6500 - page 1097

    2-1048 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show snmp cont ext show snmp c ontext T o display SNMP conte xt information, use the show snmp context comm and. show snmp conte xt Syntax Descript ion This c omm and ha s no a rgume nts o r keyword ...

  • Cisco Systems 6500 - page 1098

    2-1049 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show snm p co unters show snmp c ounters T o display SNMP counter info rmation, use the sho w snmp counters com mand. show s nmp count ers [ v3 | {{ m od/port } { dot1d | dot3 | hcrmon | ifmib | rmon }}] ...

  • Cisco Systems 6500 - page 1099

    2-1050 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show s n mp coun ters snmpInASNParseErrs = 0 snmpInTooBigs = 0 snmpInNoSuchNames = 0 snmpInBadValues = 0 snmpInReadOnlys = 0 snmpInGenErrs = 0 snmpInTotalReqVars = 61747 snmpInTotalSetVars = 0 snmpI ...

  • Cisco Systems 6500 - page 1100

    2-1051 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show snm p co unters snmpInT o talReqV ars Number o f MIB objects retriev ed successfu lly by the SNMP prot ocol entit y as the resul t of re cei ving v alid S NMP Get-Reque st and Get- Next PDUs. snmpIn ...

  • Cisco Systems 6500 - page 1101

    2-1052 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show s n mp coun ters snmpInT raps Number o f SNMP T rap PD Us acce pted an d proc essed by the SNMP protoc ol entit y . snmpO utT ooBig s Num ber of SNMP PD Us gene rated b y the SN MP prot ocol en ...

  • Cisco Systems 6500 - page 1102

    2-1053 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show snm p en ginei d show snmp e ngineid T o display the SNMP local engine ID, use the show snmp engineid comman d. show snmp enginei d Syntax D escr i pti on This comm a nd ha s n o argume nts or keywo ...

  • Cisco Systems 6500 - page 1103

    2-1054 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show snm p gr oup show snmp group T o display the name of the SNMP group or collec tion of users wh o hav e a common ac cess policy , use the show snmp g roup command . show snmp gr oup [ volatile | ...

  • Cisco Systems 6500 - page 1104

    2-1055 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show snm p gr oup The SNMP func tionality o n the Cata lyst enterp rise LAN switc hes for SNMP v 1 and SNMP v 2c remain s intact; ho we ver , the functionality has great ly expande d for SNMPv3. Refer to ...

  • Cisco Systems 6500 - page 1105

    2-1056 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show snmp ifalias show snmp ifalias T o display SNMP interfa ce aliases, use the show snmp ifalias co mmand. show snmp ifalias [ ifIndex ] show snmp ifalias module mo d show snmp ifalias vlan [ vl a ...

  • Cisco Systems 6500 - page 1106

    2-1057 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show snm p no tify show snmp notify T o display the snmpNotify T able conf iguration, use th e sho w snm p noti fy command . show snmp notify [ volatile | nonvolatile | rea d - on l y ] show snmp notify ...

  • Cisco Systems 6500 - page 1107

    2-1058 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show snmp notify Ta b l e 2 - 8 3 descri bes the f ields in the show snmp notify command outpu t. Relat e d Commands clear s nmp notify set snmp not ify T able 2-83 sho w snmp notify Command O utput ...

  • Cisco Systems 6500 - page 1108

    2-1059 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show snmp rmonmemory show snmp rmonmemory T o display the memory usag e limit in percenta ge, use the show snmp rmonmemory comma nd. show snmp rmonmemory Syntax D escr i pti on This comm a nd ha s n o ar ...

  • Cisco Systems 6500 - page 1109

    2-1060 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show snmp target addr show snmp ta rgetadd r T o display the SNMP tar get address entries in the snmpT argetAddr essT able, use the show snmp targetaddr co mmand . show snmp tar getaddr [ volatile | ...

  • Cisco Systems 6500 - page 1110

    2-1061 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show snm p t argeta ddr Ta b l e 2 - 8 4 descr ibes the f ields in the show snmp targetaddr command ou tput . Relat e d Commands clear snmp tar g etaddr set snmp ta rgetaddr T able 2-84 sho w snmp tar ge ...

  • Cisco Systems 6500 - page 1111

    2-1062 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show sn mp target para ms show snmp ta rgetparams T o disp lay the SNMP pa rameter s used in t he snmpT ar getPa ramsT able when gene ratin g a message to a tar get, use the show snmp targetparams c ...

  • Cisco Systems 6500 - page 1112

    2-1063 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show snmp targetparams Ta b l e 2 - 8 5 descr ibes the f ields in the show snmp tar getparams comma nd output. Relat e d Commands clear snmp tar getparams set snmp ta rgetparams T able 2-85 sho w snmp ta ...

  • Cisco Systems 6500 - page 1113

    2-1064 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show s n mp user show snmp user T o displa y SNMP information fo r a specif ic user , use the show snmp user comm and. show snmp user [ volatile | nonvolatile | rea d - on l y ] show snmp user [ -he ...

  • Cisco Systems 6500 - page 1114

    2-1065 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show snm p us er Ta b l e 2 - 8 6 descr ibes the f ields in the show snmp user comma nd output. Relat e d Commands clear sn mp user set snmp user T able 2-86 sho w snmp user Com mand Output Fields Field ...

  • Cisco Systems 6500 - page 1115

    2-1066 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show snmp view show snmp view T o disp lay th e SNMP MIB vi ew conf igurat ion, u se the show snmp view comman d. show snmp view [ volatile | non volat ile | read- onl y ] show snmp view [ -hex ] { ...

  • Cisco Systems 6500 - page 1116

    2-1067 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show sn mp vie w Ta b l e 2 - 8 7 descr ibes the f ields in the show snmp view command ou tput. Relat e d Commands clear sn mp view set snmp view T able 2-87 sho w snmp vie w Command Output Fields Field ...

  • Cisco Systems 6500 - page 1117

    2-1068 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show span show span T o display informat ion about the curren t SP AN conf iguration, use th e show span comm and. show span [ all ] Syntax Descript ion Defaults Thi s command has no de fault setti ...

  • Cisco Systems 6500 - page 1118

    2-1069 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show span Relat e d Commands clear co nfi g set spantree root Multicast Status of whether monitoring m ulticast t raff ic is ena bled or d isabled. Filter Monitored VLANs in source t runk ports. Max. Ban ...

  • Cisco Systems 6500 - page 1119

    2-1070 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show spantr ee show spantree T o displ ay span ning tree i nform ation fo r a VLAN or p ort, use t he show spantree comm and. show spantr ee [ vlan ] [ active ] show spantr ee mod / port Syntax Desc ...

  • Cisco Systems 6500 - page 1120

    2-1071 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show spant ree Exam ples This example (while in PVST+ mode) sho w s ho w to display the acti v e s panning tree port conf iguration for VL AN 1: Console> (enable) show spantree 1 active VLAN 1 Spannin ...

  • Cisco Systems 6500 - page 1121

    2-1072 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show spantr ee Port State Role Cost Prio Type ------------------------ ------------- ---- -------- ---- -------------------- 3/3 forwarding DESG 19 32 P2P, PEER(STP) 5/1 forwarding DESG 4 32 P2P, Ed ...

  • Cisco Systems 6500 - page 1122

    2-1073 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show spant ree Relat e d Commands show spantr ee backbonefast show spantr ee blockedports show spantr ee port vlancost show spantr ee statistics show spantr ee summary show spantr ee uplinkfast Forward D ...

  • Cisco Systems 6500 - page 1123

    2-1074 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show spant ree backb onefast show spantree ba ckbonefa st T o disp lay whether the sp anning tre e BackboneF ast Con verg ence featur e is enabl ed, use the show spantree backbonefast com m and. sho ...

  • Cisco Systems 6500 - page 1124

    2-1075 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show spant ree blo cke dports show spantree bl ockedports T o di splay o nly the bloc ked por t s o n a p er-VLAN or per-instanc e ba sis, use th e show spantree blockedports co mmand . show spantr ee bl ...

  • Cisco Systems 6500 - page 1125

    2-1076 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show spantree bpdu-filter show spantree bpdu-filter T o display information ab out BPDU filtering , use the show spantree bpdu-f ilter command. show spantr ee bpdu-f ilter [ mod [ / port ]] Syntax D ...

  • Cisco Systems 6500 - page 1126

    2-1077 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show spant ree bpd u-guard show spantree bp du-guard T o display informat ion about BPDU guard, use the show spantr ee bpdu-guard comman d. show spantr ee bpdu-guard [ mo d [ / port ]] Syntax D escr i pt ...

  • Cisco Systems 6500 - page 1127

    2-1078 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show spantr ee bpdu-ske wing show spantree bp du-skewing T o display BPDU ske wing detection status, use the show spantree bpdu-skewing comm an d. show spantr ee bpdu- skewing vlan [ m od/port ] sho ...

  • Cisco Systems 6500 - page 1128

    2-1079 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show spant ree bpd u-skewi ng . . 8/24 4111 113922 Tue Nov 21 2000, 06:26:05 8/26 113926 113926 Tue Nov 21 2000, 06:26:05 8/28 4111 113931 Tue Nov 21 2000, 06:26:05 Console> (enable) This exam ple sho ...

  • Cisco Systems 6500 - page 1129

    2-1080 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show spantree conflicts show spantree conflicts T o d is p l ay the MAC address of the root switch in the instance, the time rem ai ning befo re the VLAN joins the instance, and the number of second ...

  • Cisco Systems 6500 - page 1130

    2-1081 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show spant ree con flicts This e xample shows th e output if there are conflicts on the specif ied VLAN: Console> (enable) show spantree conflicts 1 Inst MAC Delay Time left ---- ----------------- --- ...

  • Cisco Systems 6500 - page 1131

    2-1082 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show sp a ntree defaultcostmode show spantree de faultcostmode T o display the current def ault port cost m o de, use the show span tree default costmode co mmand. show spantree default costmo de Sy ...

  • Cisco Systems 6500 - page 1132

    2-1083 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show spant ree gua rd show spantree gu ard T o display spanning t ree guard inf ormatio n for the VLANs or i nstances on a po rt, use the show s pantr ee guard com mand . show spantr ee guar d [ vlan ] s ...

  • Cisco Systems 6500 - page 1133

    2-1084 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show spantr ee guard Exam ples Th is exampl e sh ows how to displ ay sp an ning tre e gu ar d in for ma tion f or a sp ec ific VL AN: Console> show spantree guard 1004 Port Vlan Port-State Guard ...

  • Cisco Systems 6500 - page 1134

    2-1085 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show spant ree mapp ing show spantree mappi ng T o display VLAN and instan ce mapping informa tion, use the show spantree mapping . show spantr ee mapping [ co nfig ] Syntax D escr i pti on Defaults Thi ...

  • Cisco Systems 6500 - page 1135

    2-1086 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s sh ow spantree mappi ng This e xample shows h ow to display ma ppings conf igured on the local switch: Console> (enable) show spantree mapping config Inst Root Mac Vlans ---- ----------------- -- ...

  • Cisco Systems 6500 - page 1136

    2-1087 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show s pant ree mis tp -instanc e show spantree mistp-instan ce T o display instance infor m ation, use the show spantree mistp-instance command. show spantr ee mistp-instance [ instanc e ] [ active ] sh ...

  • Cisco Systems 6500 - page 1137

    2-1088 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show spantree mistp-instance Ta b l e 2 - 9 2 descri bes the f ields in the show spantree mist p-instance command out put: Relat e d Commands set spant ree po rtinstance cost set spant ree po rtinst ...

  • Cisco Systems 6500 - page 1138

    2-1089 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show spant ree mst show spantree mst T o display MST informa tion, use the show spantree mst comm and. show spantr ee mst [ instance | m od/port ] show spantree mst active Syntax D escr i pti on Defaults ...

  • Cisco Systems 6500 - page 1139

    2-1090 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s sh ow s pan tr ee m st This e xample shows h ow to display MST in stance-specif ic information for instance 1: Console> (enable) show spantree mst 1 Spanning tree mode MST Instance 1 VLANs Mapped ...

  • Cisco Systems 6500 - page 1140

    2-1091 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show spant ree mst con fig show spantree mst conf ig T o display the MST re gion informat ion present in NVRAM and to display cha nges that hav e not been appli ed to the MS T region configurat ion yet , ...

  • Cisco Systems 6500 - page 1141

    2-1092 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show spantree mst config 7 301-400 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - ================================================ Edit buffer is locked by: Console Console> (enable) Relat e d Commands cl ...

  • Cisco Systems 6500 - page 1142

    2-1093 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show spant ree port fa st show spantree po rtfast T o di splay Port Fast infor ma tion, use th e show spantree portfast comman d. show spantr ee portfast [ mod/po rt ] Syntax D escr i pti on Defaults Thi ...

  • Cisco Systems 6500 - page 1143

    2-1094 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s sh ow spantree porti nstancecost show spantree po rtinstanc ecost T o sho w the path cost fo r the inst ances on a port , use the show spantree portinstancecost co mman d. show spantr ee portinstanc ...

  • Cisco Systems 6500 - page 1144

    2-1095 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show spant ree port v lancost show spantree po rtvlanco st T o sho w the path cost for the VLANs or e xtended-range VLANs, use the show spantree portvl ancost comm and. show spantr ee port vlancost mod/p ...

  • Cisco Systems 6500 - page 1145

    2-1096 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show spantree statistics show spantree sta tistics T o sho w spanning tree statistica l information, us e the show spantree statistics comman d. show spantr ee statistics m od/port [ vlan ] show spa ...

  • Cisco Systems 6500 - page 1146

    2-1097 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show s pant ree stat istics message age (port/VLAN) 0(10) designated_root 00-10-2f-52-eb-ec designated_cost 0 designated_bridge 00-10-2f-52-eb-ec designated_port 0xcccf top_change_ack FALSE config_pendin ...

  • Cisco Systems 6500 - page 1147

    2-1098 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show spantree statistics This e xample sho ws ho w to display in s tance-sp ecif ic information: Console> (enable) show spantree statistics 2 mistp-instance 2 Port 2/1 Instance 2 SpanningTree ena ...

  • Cisco Systems 6500 - page 1148

    2-1099 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show s pant ree stat istics num of similar bpdus to process 0 received_inferior_bpdu FALSE next state 3 src mac count: 0 total src mac count 0 curr_src_mac 00-00-00-00-00-00 next_src_mac 00-00-00-00-00-0 ...

  • Cisco Systems 6500 - page 1149

    2-1100 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show spantree statistics bridge forward delay 15(15) sec topology change initiator: 1/0 last topology change occured: Fri Sep 7 2001, 09:52:22 topology change FALSE topology change time 35 topology ...

  • Cisco Systems 6500 - page 1150

    2-1101 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show s pant ree stat istics desig nated_ bridge B ridge i denti fier of the bridge assumed to be t he design ated bridge f or t he LAN associ ated wi th the port. desig nated_por t Port ide ntifier of th ...

  • Cisco Systems 6500 - page 1151

    2-1102 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show spantree statistics VLAN- based infor matio n and st ati stics span ningtr ee type T ype of spanning t ree (IEE E, IBM , CISCO). spanningtree m ulticast addres s Destination address use d to se ...

  • Cisco Systems 6500 - page 1152

    2-1103 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show s pant ree stat istics Relat e d Commands clear s pantr ee statistics show spantr ee curr_sr c_mac Sour ce MA C ad dr es s o f th e co nf igured BP DU re ceiv ed on a pa rticular p o rt. I t s h o u ...

  • Cisco Systems 6500 - page 1153

    2-1104 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show sp a ntree summa r y show spantree su mmary T o d isplay a summ ar y of spanni ng tr ee i nfo rma tio n, use t he show spantree summary comman d. show spantr ee summary [ novlan ] show spantr e ...

  • Cisco Systems 6500 - page 1154

    2-1105 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show s pant ree sum m ary This exam ple shows how to displ ay n on- VLA N-spec ific inf orma tio n onl y: Console> show spantree summary novlan Spanning tree mode: RAPID-PVST+ MAC address reduction: e ...

  • Cisco Systems 6500 - page 1155

    2-1106 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show sp a ntree summa r y This exam ple sh ows how to displa y a s ummar y of spanni n g tr ee M ST inst anc e info rm ation : Console> show spantree summary mst MAC address reduction:disabled Ro ...

  • Cisco Systems 6500 - page 1156

    2-1107 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show spant ree upl in kfast show spantree up linkfast T o sho w the UplinkFa st feature settings, use the show spantr ee uplinkfast comm and. show spantr ee uplinkfast [{ mi stp-instance [ instances ]} | ...

  • Cisco Systems 6500 - page 1157

    2-1108 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show spantree up linkfast This e xample sho ws how to display the UplinkFa st feature settings for a specif ic instance: Console> show spantree uplinkfast mistp-instance 1 Station update rate set ...

  • Cisco Systems 6500 - page 1158

    2-1109 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show star tup-co nfi g show startu p-config T o display the startup conf iguration f ile contained in NVRAM or specified by the CONFIG_FILE en vironm ent va riable, use the sho w startup-config co mmand. ...

  • Cisco Systems 6500 - page 1159

    2-1110 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show start up-config #vtp set vtp domain dan set vtp mode transparent set vlan 1 name default type ethernet mtu 1500 said 100001 state active set vlan 1002 name fddi-default type fddi mtu 1500 said ...

  • Cisco Systems 6500 - page 1160

    2-1111 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show star tup-co nfi g #module 8 empty ! #module 9 empty ! #module 15 empty ! #module 16 empty end Console> (enable) Relat e d Commands show running-conf ig ...

  • Cisco Systems 6500 - page 1161

    2-1112 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show summertime show summertime T o disp lay th e current st atus of the summert ime feat ure, use the show summert ime comm and. show summertime Syntax Descript ion This c omm and ha s no a rgume n ...

  • Cisco Systems 6500 - page 1162

    2-1113 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show sy stem show system T o display system information, use the sho w system command. show system Syntax D escr i pti on This comm a nd ha s n o keywords or argume nts. Defaults Thi s command has no de ...

  • Cisco Systems 6500 - page 1163

    2-1114 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show system Core Dump Core File ------------------------ ----------------------- enabled bootflash:crashinfo System Logging Host File Interval -------------- --------------- ------------------------ ...

  • Cisco Systems 6500 - page 1164

    2-1115 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show sy stem Core Dump Core File ------------------------ ----------------------- disabled slot0:crashinfo Syslog Dump Syslog File ------------------------ ----------------------- enabled bootflash:syslo ...

  • Cisco Systems 6500 - page 1165

    2-1116 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show system Relat e d Commands set system ba ud set system cont act set system c ore-dump set system c ore-file set system c ountryco de set system loca tion set system mo dem set system na me set s ...

  • Cisco Systems 6500 - page 1166

    2-1117 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show sys te m highav ai lability show system hi ghava ilability T o display the system high-a va ilability configur ation settings, use the show system highavailabil i ty comm an d. show system higha vai ...

  • Cisco Systems 6500 - page 1167

    2-1118 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show system info-log show system info-log T o display the confi guration of the system information logging feature, use the sho w s ystem info-log comm and. show system info-log Syntax Descript ion ...

  • Cisco Systems 6500 - page 1168

    2-1119 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show sys te m superv is or- update show system supervisor-update T o di splay the Era sa ble Pro gram mabl e L ogic Device ( EPLD ) upgra de pr oc ess c onfigurat ion , use the show system supe rvisor -u ...

  • Cisco Systems 6500 - page 1169

    2-1120 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show system switchmode show system switchmode T o display the system switching mode setting, use the show system swit chmode comma nd. show system switchmode Syntax Descript ion This c omm and ha s ...

  • Cisco Systems 6500 - page 1170

    2-1121 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show tacac s show tacacs T o di splay the T ACA CS+ pr otoc ol c on figuration, use th e show ta cacs comm and. sho w taca cs [ noalias ] Syntax D escr i pti on Defaults Thi s command has no de fault set ...

  • Cisco Systems 6500 - page 1171

    2-1122 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show tacacs Relat e d Commands set tac acs a ttemp ts set taca cs direct edrequest set ta cacs k ey set taca cs server set ta cacs ti m eout T acacs t imeout T ime in s econd s to wait f or a respo ...

  • Cisco Systems 6500 - page 1172

    2-1123 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show te ch- suppor t show tech-supp ort T o di splay sy stem and c onfiguration i nform ati on you ca n provide t o the Cisco T echnic al Ass istanc e Center when repo rting a pr oblem, use th e show tec ...

  • Cisco Systems 6500 - page 1173

    2-1124 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show tech-su pport If you spe cify the config ke y word , the show tech-support command di sp lays the o utput of t hese comm ands: • show conf ig • show flash • show log • sho w micr ocode ...

  • Cisco Systems 6500 - page 1174

    2-1125 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show te ch- suppor t • show system • show spantr ee active • sh ow ve rs i on If you spe cify a m odul e, po rt, or VL AN numbe r, the system di spla ys ge ne ral syst em info rm ati on a nd inform ...

  • Cisco Systems 6500 - page 1175

    Chapter 2 Ca talyst 6 500 Series Swi tch and ROM M onitor Comm ands show test 2-1126 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 222 show test T o display the errors r eported from the diagnostic tests, the diagnostic le vel, a n d the a ction that the supervisor e ngine takes after a diagnostics test failure , use the ...

  • Cisco Systems 6500 - page 1176

    2-1127 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show te st DontLearnTest: . ConditionalLearnTest: . BadBpduTest: . TrapTest: . Loopback Status [Reported by Module 2] : Ports 1 2 ----------- . . Channel Status : Ports 1 2 ----------- . . This exam ple ...

  • Cisco Systems 6500 - page 1177

    2-1128 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show test This e xample shows the di splay if you do not specify a module: Console> show test Environmental Status (. = Pass, F = Fail, U = Unknown, N = Not Present) PS1:. PS2:N PS1 Fan:. PS2 Fan ...

  • Cisco Systems 6500 - page 1178

    2-1129 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show te st Ta b l e 2 - 9 7 descri bes th e po ssible fields in the show test c om mand ou tput . The fields shown depend on the m odule ty pe qu er ied. T able 2-97 sho w tes t Command Output Fie lds Fi ...

  • Cisco Systems 6500 - page 1179

    2-1130 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show test Relat e d Commands set tes t di agfa il- ac tion set test dia glevel DPRAM T est results for the dual-po rt RAM. SAMB A T est results for the SAMB A chip. Saints T est results for the SAIN ...

  • Cisco Systems 6500 - page 1180

    2-1131 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show time show time T o display the curren t time of day in the system clo ck, use the show time command. show time Syntax D escr i pti on This comm a nd ha s n o keywords or argume nts. Defaults Thi s c ...

  • Cisco Systems 6500 - page 1181

    2-1132 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s sho w t imezo ne show timezone T o disp lay th e curr ent time zone and o ff set, us e the show ti mezone comman d. show timezone Syntax Descript ion This c omm and ha s no a rgume nts o r keywords. ...

  • Cisco Systems 6500 - page 1182

    2-1133 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show top show top T o start the T opN proces s, use the show top command . show top [ N ] [ metric ] [ inte rval inter va l ] [ port_typ e ] [ background ] Syntax D escr i pti on Defaults The de faults a ...

  • Cisco Systems 6500 - page 1183

    2-1134 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show top Usage Guid el i nes Y ou can ter minat e T opN pro cesses wi th the background option spec ified only by using the clea r top [ r e port_num ] comman d. T opN re ports wi th t he backg roun ...

  • Cisco Systems 6500 - page 1184

    2-1135 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show top rep ort show top re port T o list all T opN processes and specif ic T opN reports, use the show top r eport comm and. show to p report [ r ep ort_num ] Syntax D escr i pti on Defaults Thi s comm ...

  • Cisco Systems 6500 - page 1185

    2-1136 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show top r eport This exampl e shows ho w to displa y the avai lable To pN rep ort 2 (shown in the firs t example ) for the switch: Console> show top report 2 Start Time: 03/09/2000,11:34:00 End ...

  • Cisco Systems 6500 - page 1186

    2-1137 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show traff i c show traffic T o displa y traff ic and peak inform ation, use the show traffic comma nd. show traffic Syntax D escr i pti on This comm a nd ha s n o keywords or argume nts. Defaults Thi s ...

  • Cisco Systems 6500 - page 1187

    2-1138 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s sho w tr unk show trunk T o display trunking informati on for the switch, use the show trunk comm an d. show trunk [ mo d [ /port ]] [ det ail ] [ extended-range ] Syntax Descript ion Defaults Thi s ...

  • Cisco Systems 6500 - page 1188

    2-1139 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show trunk Exam ples Th is example sh ows how to displa y tr unkin g in for mat ion for the sw it ch: Console> show trunk * - indicates vtp domain mismatch # - indicates dot1q-all-tagged enabled on th ...

  • Cisco Systems 6500 - page 1189

    2-1140 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s sho w tr unk Port Vlans allowed and active in management domain -------- --------------------------------------------------------------------- 3/1 2 Port Vlans in spanning tree forwarding state and ...

  • Cisco Systems 6500 - page 1190

    2-1141 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show ud ld show udld T o display UDLD informatio n, use the show udld co mmand. show udl d show udl d port [ mod [ /port ]] Syntax D escr i pti on Defaults Thi s command has no de fault setti ngs. Comma ...

  • Cisco Systems 6500 - page 1191

    2-1142 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s sh ow ud ld Ta b l e 2 - 9 9 descri bes the f ields in the show udl d comman d outpu t. Relat e d Commands set udld set udld agg ressive-mode set udld interval T able 2-99 sho w udld Comma nd Output ...

  • Cisco Systems 6500 - page 1192

    2-1143 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show users show us ers T o show if the console por t is acti ve and to list all acti ve T elnet sessions with th e IP address or IP alias of the originatin g host, use the show use rs comma nd. show user ...

  • Cisco Systems 6500 - page 1193

    Chapter 2 Ca talyst 6 500 Series Swi tch and ROM M onitor Comm ands show version 2-1144 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 22 show version T o display so ftware, h ardwar e, and web in terfa ce versio n informa tion, use the show ve r s i o n co mm and . sh ow ve rs i on [ mod ] sh ow ve rs i on ep ld [ mod ] ...

  • Cisco Systems 6500 - page 1194

    2-1145 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show vers ion DRAM FLASH NVRAM Module Total Used Free Total Used Free Total Used Free ------ ------- ------- ------- ------- ------- ------- ----- ----- ----- 1 65408K 45402K 20006K 16384K 8683K 7701K 51 ...

  • Cisco Systems 6500 - page 1195

    2-1146 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show version Ta b l e 2 - 1 0 0 describes the fiel ds in the show v ersion com mand ou tput. Relat e d Commands download T able 2-1 00 sho w version Comm and Output Fields Field Description NmpSW V ...

  • Cisco Systems 6500 - page 1196

    2-1147 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show vlan show vlan T o display VLAN informatio n, u se the show vlan co mman d. show vlan [ trunk ] show vlan vlans [ notrunk ] show vlan mapping show vlan type show vlan summary show vlan f i re wall-v ...

  • Cisco Systems 6500 - page 1197

    2-1148 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show v lan 10 VLAN0010 active 18 6/1,6/3 11 VLAN0011 active 19 6/2 20 VLAN0020 active 20 21 VLAN0021 active 21 30 VLAN0030 active 22 31 VLAN0031 active 23 1002 fddi-default active 6 1003 token-ring- ...

  • Cisco Systems 6500 - page 1198

    2-1149 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show vlan This exam ple sh ows how to displa y inf or matio n f or a sp eci fic VLA N an d type : Console> show vlan 2 fddi VLAN Name Status IfIndex Mod/Ports, Vlans ---- ----------------------------- ...

  • Cisco Systems 6500 - page 1199

    2-1150 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show v lan This exam ple shows how to di spla y a s umm ar y of ac tive, suspended, a nd exten de d VL ANs: Console> show vlan summary Vlan status Count Vlans ------------- ---------------------- ...

  • Cisco Systems 6500 - page 1200

    2-1151 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show vlan Relat e d Commands set trunk set vlan show trunk Second ary-T ype T y pe of second ary VLAN port. Possible values ar e isol ated, community , or -. Ports Number of the m odu le an d por ts a ss ...

  • Cisco Systems 6500 - page 1201

    2-1152 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show vlan count ers show vlan cou nters T o displa y counters for all VLANs or a rang e of VLANs, use the show v lan counters co mmand. show vlan counters [ vl ans ] Syntax Descript ion Defaults Thi ...

  • Cisco Systems 6500 - page 1202

    2-1153 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show vlan counte rs Relat e d Commands clear vl an counters L2-Non Unicas t-Octet s + L3-In- NonUni cast- Octe ts Layer 2 no nunic a st octe ts per V LAN an d Layer 3 nonuni ca st oct et s pe r input VLA ...

  • Cisco Systems 6500 - page 1203

    2-1154 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show vlan verify-port-provisioning show vlan verify-p ort-provisioning T o verif y the stat u s of the VLA N po rt-p rovision i ng veri fication fea ture , use the show vlan veri fy-port- prov ision ...

  • Cisco Systems 6500 - page 1204

    2-1155 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show vm ps show vmps T o di splay VM PS configura tion i nfor ma tion, use the show vmps comma nd. show vmps [ noalia s ] Syntax D escr i pti on Defaults Thi s command has no de fault setti ngs. Comma nd ...

  • Cisco Systems 6500 - page 1205

    2-1156 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show vmps Relat e d Commands download set vmps server set vmps st ate State Stat u s on whether VMPS is enab led or disa bled. Operatio nal Status VMPS stat us (acti ve, inact ive, or downlo ading). ...

  • Cisco Systems 6500 - page 1206

    2-1157 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show vm ps mac show vmps mac T o disp lay the MA C-ad dress- to-VLAN ma pping tabl e, use the show vmps mac com mand. show vmps mac [ ma c_addr ] Syntax D escr i pti on Defaults Thi s command has no de f ...

  • Cisco Systems 6500 - page 1207

    2-1158 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show vmps statis tics show vmps statistics T o display the VMPS statistics, u se the show vmps statistics command. show vmps statistics Syntax Descript ion This c omm and ha s no keywords or argume ...

  • Cisco Systems 6500 - page 1208

    2-1159 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show vm ps vlan show vmps vlan T o displa y all the MA C addresses assigned to a VLA N in the VMPS table, use the sh ow vmps vl an comm and. show vmps vlan vlan_nam e Syntax D escr i pti on Defaults Thi ...

  • Cisco Systems 6500 - page 1209

    2-1160 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show vtp show vtp T o displa y devices and c onflict s betwee n devices in the VLAN Trunk Protocol (V TP) version 3 domain, use the show vtp command . show vtp { devices | conflicts } Syntax Descrip ...

  • Cisco Systems 6500 - page 1210

    2-1161 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show vtp Relat e d Commands set vtp ...

  • Cisco Systems 6500 - page 1211

    2-1162 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show vtp domain show vtp domain T o display VTP domain informati o n, use the show vtp domain comman d. show vtp domain Syntax Descript ion This c omm and ha s no keywords or argume nts. Defaults Th ...

  • Cisco Systems 6500 - page 1212

    2-1163 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show vtp do main Relat e d Commands set vtp show vtp statistics Notificat ions Notificatio ns to SNM P (e nabl ed or disa bled ). Password Password c onfigure d, configur ed but h idde n, or n ot configu ...

  • Cisco Systems 6500 - page 1213

    2-1164 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show vtp stati stics show vtp statisti cs T o display VTP statistics, use th e s how vtp st atist ics command. show vtp statistics Syntax Descript ion This c omm and ha s no keywords or argume nts. ...

  • Cisco Systems 6500 - page 1214

    2-1165 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands show vtp s ta tistics Relat e d Commands clear vt p statistic s set vtp No of con fig revision errors Nu mber of conf ig re vision errors. No of con fig digest errors N umber of conf ig re visi on dige s ...

  • Cisco Systems 6500 - page 1215

    2-1166 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s slip slip T o attac h or detach Se rial Line Internet Protocol (SLI P) for the co nsole port , use the slip command. slip { attach | detach } Syntax Descript ion Defaults The de fault is SLIP is not ...

  • Cisco Systems 6500 - page 1216

    2-1167 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands squeeze squeeze T o d el et e Fl ash fil es pe rm an en tly , use th e squeeze command . squeeze [ m/ ] device : Syntax D escr i pti on Defaults Thi s command has no de fault setti ngs. Comma nd T ypes S ...

  • Cisco Systems 6500 - page 1217

    Chapter 2 Ca talyst 6 500 Series Swi tch and ROM M onitor Comm ands stack 2-1168 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 22 stack T o dump a st ack trace of fram es, use the stack co mmand . stack [ -d | - m ] [ num ] Syntax Descript ion Defaults The d efault for num is fi ve frames. Comma nd T ypes R OM moni tor c ...

  • Cisco Systems 6500 - page 1218

    2-1169 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands switch switch T o swi t ch the c lock f rom the super v i sor cloc k to th e inte rn al c l ock or fr om th e act ive supervisor engi ne to the stan dby supervis or engine , use the switch comm and. swit ...

  • Cisco Systems 6500 - page 1219

    2-1170 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s switch cons ole switch console T o swi tch the c ons ole con nection physic ally to t he MSFC on the active supervisor engi ne, us e the switch consol e command. switch conso le [ mN o ] Syntax Desc ...

  • Cisco Systems 6500 - page 1220

    2-1171 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands switch fa bri c switch fabric T o reset th e acti ve Switch F abric Module and allo w the standb y Switch Fabric Module to take o ver , use the switch fabric command . switch fabric [ mN o ] Syntax D esc ...

  • Cisco Systems 6500 - page 1221

    2-1172 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s sync sync T o write th e workin g in-cor e copy o f en vironment v ariables an d the aliases out to NVRAM so they are read on the ne x t reset, use the sync comman d. sync Syntax Descript ion This c ...

  • Cisco Systems 6500 - page 1222

    2-1173 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands sysre t sysret T o display the return informatio n from the last booted system image, use the sysret comman d. sysret Syntax D escr i pti on This comm a nd ha s n o argume nts or keyword s. Defaults Thi ...

  • Cisco Systems 6500 - page 1223

    2-1174 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s tclquit tclquit T o exit f rom a to ol co mma nd lan guage (TC L) shel l, use t he t clquit com mand. tclquit Syntax Descript ion This c omm and ha s no keywords or argume nts. Defaults Thi s comman ...

  • Cisco Systems 6500 - page 1224

    2-1175 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands tclsh tclsh T o sta rt a tool co mm and langu age (T CL) sh ell, use the tc lsh command. tclsh Syntax D escr i pti on This comm a nd ha s n o keywords or argume nts. Defaults Thi s command has no de faul ...

  • Cisco Systems 6500 - page 1225

    2-1176 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s telnet telnet T o start a T elnet conn ection to a rem ote host or to encrypt a T elnet sessio n, use the teln et command. teln et ho st [ port ] teln et en cryp t ke rb eros host Syntax Descript io ...

  • Cisco Systems 6500 - page 1226

    2-1177 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands test cab le-diagn osti cs test cable-d iagnostics T o te st the co nditi on of 10 -G igabit Et hern et lin ks a nd copp er ca bles on 48-po rt 10/ 100 /100 0 BASE-T modules, use the test cable-diagnostic ...

  • Cisco Systems 6500 - page 1227

    2-1178 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s test cable-diagnostics Examples This example sh ows how to start t he PRBS test on po rt 1 on modu le 5 : Console> (enable) test cable-diagnostics prbs start 5/1 PRBS cable-diagnostic test starte ...

  • Cisco Systems 6500 - page 1228

    2-1179 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands test sn mp tr ap test snmp trap T o send an SNMP trap message to the trap recei ver s, use the test snmp trap co mm and. test snmp trap trap_num [ specif ic_nu m ] Syntax D escr i pti on Defaults Thi s c ...

  • Cisco Systems 6500 - page 1229

    2-1180 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s tra cer oute traceroute T o di splay a h op- by-hop path th rough an I P ne twork f rom th e Catal yst 6500 se rie s swi tch t o a spe ci fic destinati on ho st, use the tracer oute co mmand. tracer ...

  • Cisco Systems 6500 - page 1230

    2-1181 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands tracerou te Usage Guid el i nes T o i n te r r up t tr aceroute after the command has been is sued, press Ctrl-C . The trac eroute com mand uses the TTL field in the IP head er to cause routers and ser v ...

  • Cisco Systems 6500 - page 1231

    2-1182 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s tra cer oute Ta b l e 2 - 1 1 0 describes the fiel ds in the trac ero ute comm an d o utpu t. If tracer oute re cei ves an IC MP err or m essag e ot he r t han a ti me- e xc eeded o r p ort- unr eac ...

  • Cisco Systems 6500 - page 1232

    2-1183 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands unalias unalias T o remov e the alias name and as sociated value from the alias list, us e the unalias comman d. unalias name Syntax D escr i pti on Defaults Thi s command has no de fault setti ngs. Comm ...

  • Cisco Systems 6500 - page 1233

    2-1184 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s undel ete undelete T o recover a delete d file on a Flash memo ry device, use the undelete comman d. Th e del e te d fi le can be recovered usin g its index (because there co uld be multiple deleted ...

  • Cisco Systems 6500 - page 1234

    2-1185 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands unse t=varnam e unset=v arname T o remov e a vari able name from the v ariable list, use the unset= varname command. unset= varn ame Syntax D escr i pti on Defaults Thi s command has no de fault setti ng ...

  • Cisco Systems 6500 - page 1235

    2-1186 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s varname= varname= T o set the v ariable VA R N A M E to varv alue , use the varnam e= command. No te that th e syntax va rnam e = sets the variab le to a NULL str ing. varname = value Syntax Descrip ...

  • Cisco Systems 6500 - page 1236

    2-1187 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands verif y verify T o co nf irm the checksum o f a f ile on a Flash de vice, use the verify command . veri fy [[ m/ ] devic e : ] f ilename Syntax D escr i pti on Defaults Thi s command has no de fault sett ...

  • Cisco Systems 6500 - page 1237

    2-1188 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s wait wait T o cau se the C LI to pau se for a specif ied number of s econd s befo re ex ecuting t he ne xt co mmand , use the wait comman d. Thi s c om mand mig ht be in clud ed in a c onfigura tion ...

  • Cisco Systems 6500 - page 1238

    2-1189 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands whichb oot whichboot T o determine which file booted, use the whichboot comman d. whichboot Syntax D escr i pti on This comm a nd ha s n o argume nts or keyword s. Defaults Thi s command has no de fault ...

  • Cisco Systems 6500 - page 1239

    2-1190 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s write write T o uplo ad the cu rren t configuratio n to th e network or di splay th e configur ation inf orma tion cu rrently i n running m em ory , u se t he write comm and. write ne twork [ all ] ...

  • Cisco Systems 6500 - page 1240

    2-1191 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands write Exam ples Th is example sh ows how to upload the syste m5 .cfg file to t he m erc ury ho st: Console> (enable) write network IP address or name of host? mercury Name of configuration file to wri ...

  • Cisco Systems 6500 - page 1241

    2-1192 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s write This exam ple sh ows how to uploa d t he ru nni ng syst em configu ratio n to a pre spe cified loc ation : Console> (enable) write memory Upload configuration to bootflash:switch.cfg 716584 ...

  • Cisco Systems 6500 - page 1242

    2-1193 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands write tech -suppo rt write tech-sup port T o g ener ate a repor t t hat cont ai ns s tatus in forma ti on about your s wi tc h or upl oad the ou tput of t he comm an d to a T FTP s erver, wher e yo u ca ...

  • Cisco Systems 6500 - page 1243

    2-1194 Catalyst 6500 Series Switch Command Refer e nce—Release 8.1 78-15474-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s write tech-support Note I f y o u a re u pl o a d i ng t h e i n f or m a t io n to a f il e , ma ke sure the file already exists in the TFTP server , the file has approp riate perm issions , and th ...

  • Cisco Systems 6500 - page 1244

    2-1195 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Chapter 2 Catalyst 6500 Series Switch an d ROM Monitor Commands write tech -suppo rt • show pr oc mem • show pr oc cpu • show system • show spantr ee active • sh ow ve rs i on If you spe cify a m odul e, po rt, or VL AN numbe r, the system di spla ys ge ne ...

  • Cisco Systems 6500 - page 1245

    A- 1 Catalyst 6500 Series Switch Command Reference—Release 8.1 78-15474-01 APPEND IX A Acronyms T able A-1 d ef ines the ac ronyms used in this p ublication . Ta b l e A - 1 L i s t o f A c r o n y m s Acro nym E xpan sion AAA authent ication, aut h orizat ion, accou nting AAL A TM adaptation layer A CE access c ontrol e ntry A CL access c ontrol ...

  • Cisco Systems 6500 - page 1246

    A- 2 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Appendix A Acronyms CPLD Comple x Pr ogr amma ble Log ic D e vice CRC cyclic redun dancy check CRF concentrato r relay function DCC Data Co untry C ode DEC Digital Equipment Corporat io n DFI Domain-Specif ic Part Fo r mat Identif ier DHCP D y namic Host C onfigura tio ...

  • Cisco Systems 6500 - page 1247

    A-3 Catalyst 6500 Series Switch Command Reference—Release 8.1 78-15474-01 Appendix A Acronyms HTTP HyperT ext T r ansfe r Protocol ICD Interna tiona l Co de D esi gnator ICMP Inte rnet C ont rol Mess age Prot ocol IETF Internet Engine ering T ask For ce IDP initial domain part I D P ROM Ser ial EEPR OM with FRU information IDSM I ntrusion D etect ...

  • Cisco Systems 6500 - page 1248

    A- 4 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Appendix A Acronyms MOP Mai nten an ce O p erat io n Pro t ocol MO TD message of th e day MSFC Multilayer Switch Fea ture Card MSM Multila yer Switch Module MST Multiple Span ning T r ee MTP Media T ermination Point MTU maximum transmission unit MV AP multiple VLAN acc ...

  • Cisco Systems 6500 - page 1249

    A-5 Catalyst 6500 Series Switch Command Reference—Release 8.1 78-15474-01 Appendix A Acronyms PV I D port V LAN identifier PVST p er VLAN spanning tree QoS quality of service RADIUS Remote Access Dial-I n User Service RAM r andom-a ccess memor y rcp Re mote Copy Protoc ol RGMP Router-Ports Gro up Manageme nt Protocol RIF Routing In fo rma tion F ...

  • Cisco Systems 6500 - page 1250

    A- 6 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Appendix A Acronyms TFTP T rivial File T ransfer Protocol TGT ticket grantin g ticket TOS t y pe of s erv i ce TL V type- leng th v alue T rBRF T oken Ring Bridge Relay Function T rCRF T oken Ring Concentrator Relay Function TTL time to li ve U AR T Univ ers al Asynchr ...

  • Cisco Systems 6500 - page 1251

    B-1 Catalyst 6500 Series Switch Command Reference—Release 8.1 78-15474-01 APPEND IX B Acknowledgments for Open-Source Software The C atalyst op erat ing syst em soft ware pipe comman d uses H enry Spe ncer’ s regular expressio n libra ry (regex). The most re cent version of t he library has been modified slightly i n the Catal yst opera ting sy ...

  • Cisco Systems 6500 - page 1252

    B-2 Catalyst 6500 S eries Switch C o mmand Reference —Release 8.1 78-15474-01 Appendi x B Acknowledgmen ts for Open -Source Software ...

  • Cisco Systems 6500 - page 1253

    IN-1 Catalyst 6500 Series Switch Command Reference—Release 8.1 78-15474-01 INDEX Symbols ? (help) comm an d c om ple ti o n 1-11 displaying ma tc hes 1-11 switch CLI 1-9 Numerics 3DES keys defining 2-327 removi ng 2-39 802.1 q displayi ng st atu s o f th e all -ta gged fea ture o n a port 2-929 setting the all-ta g ged feature on a port 2-410 802 ...

  • Cisco Systems 6500 - page 1254

    Index IN-2 Catalyst 6500 Series S witch Command Reference—Release 8.1 78-15474-01 aggreg ate rate limit clearin g 2-95 aging t ime informatio n displaying 2-710 alias clearin g 2-7 defining 2-215 displaying 2-700 ARP clearin g inspect ion statisti cs 2-101 displaying i nspection in formati on 2-1032 displaying t able 2-701 setting inspecti on and ...

  • Cisco Systems 6500 - page 1255

    Inde x IN-3 Catalyst 6500 Series Switch Command Reference—Release 8.1 78-15474-01 setting NAM envir onment 2-238 synchroniz ing aut o-confi g file 2-240 boot c onfi gurat ion regi ster setting 2-232 BOOT envi ronm ent varia b le clearin g 2-12 displaying c onte nts 2-705 setting 2-241 boot file determinin g which file booted 2-1189 bootflash disp ...

  • Cisco Systems 6500 - page 1256

    Index IN-4 Catalyst 6500 Series S witch Command Reference—Release 8.1 78-15474-01 display ing adja cencies 2-852 displaying CE F table info rmati on 2-844 displaying e ntry info rmati on 2-852 displaying i nterfac es 2-839 displaying M AC addresses 2-841 chan nel has h displaying ha sh inform ation 2-728 chan nels displayi ng port or mod ule info ...

  • Cisco Systems 6500 - page 1257

    Inde x IN-5 Catalyst 6500 Series Switch Command Reference—Release 8.1 78-15474-01 scrolli ng dow n line or scre en 1-6 scrolling to sp ecified tex t 1-6 transpos ing mistyped c haract ers 1-7 command-lin e-interfa ce See CLI comm and l o gging cleari ng log ent ry table 2-47 displayi ng comma nd log entri es 2-819 comm an d m od es switch CLI, no ...

  • Cisco Systems 6500 - page 1258

    Index IN-6 Catalyst 6500 Series S witch Command Reference—Release 8.1 78-15474-01 D data ex port disabling gl obally 2-510 disabling on ag grega te police r 2-511 disabling on por t 2-514 enab lin g g l obal ly 2-510 enab ling on aggre gat e polic er 2-511 enab lin g o n por t 2-514 setting export destinatio n 2-512 daylight sav ing time displayi ...

  • Cisco Systems 6500 - page 1259

    Inde x IN-7 Catalyst 6500 Series Switch Command Reference—Release 8.1 78-15474-01 displayi ng t ime r va lues 2-753 enabling au thentication 2-262 enabling re authentica tion 2-262 initializ ing on port 2-414 manually i n itiati ng reauthenti cation 2-414 setting idle time 2-262 setting number of frame re transmissions 2-262 setting retransmissio ...

  • Cisco Systems 6500 - page 1260

    Index IN-8 Catalyst 6500 Series S witch Command Reference—Release 8.1 78-15474-01 displaying utilization 2-1113 fan tray s setting versions for highe r -powered and lower-powere d trays 2-270 file system fo r disk0/1d evices checki ng an d re pa iri ng 2-180 File Transfer Protoc ol See FTP Firewall Servi ces Module clearin g VLANs 2-140 displayin ...

  • Cisco Systems 6500 - page 1261

    Inde x IN-9 Catalyst 6500 Series Switch Command Reference—Release 8.1 78-15474-01 setting admini strative control 2-286 setting timers 2-288 VLAN declara tion 2-284 H hardware displaying ve rsio ns 2-1144 hardwa re c ou nter s displaying 2-744 high avai lability disabling 2-646 disabling ve rsioning 2-647 displaying c onfig urat ion setti ngs 2-1 ...

  • Cisco Systems 6500 - page 1262

    Index IN- 10 Catalyst 6500 Series S witch Command Reference—Release 8.1 78-15474-01 displaying st atus and fo rwarding speed 2-767 Intern et Group M ana geme nt Pr otoc ol See IGM P Intern et Protocol See IP addres ses IP addresses 2-313 clearin g 2-31 designati ng in CLI 1-11 IP alias adding 2-306 clearin g 2-28 designati ng in CLI 1-11 displayi ...

  • Cisco Systems 6500 - page 1263

    Inde x IN- 11 Catalyst 6500 Series Switch Command Reference—Release 8.1 78-15474-01 displaying pa th 2-184 Layer 2 pro tocol tunneling applying a CoS value to ingress tunnel ing ports 2-328 cleari ng CoS value for i ngress tunn eling port s 2-40 clearing tunneling statistics 2-41 disabling on t runks 2-329 displaying tun neling information 2-941 ...

  • Cisco Systems 6500 - page 1264

    Index IN- 12 Catalyst 6500 Series S witch Command Reference—Release 8.1 78-15474-01 sending logging me ssage s to new Telne t sessions 2-356 MIB displaying CI SCO-IMA GE-MIB infor mation 2-791 MIB vi ew en try removi ng 2-118 microcod e displaying ve rsion 2-834 microflow poli cing rule clearin g 2-95 MISTP clearing statistical information 2-131 ...

  • Cisco Systems 6500 - page 1265

    Inde x IN- 13 Catalyst 6500 Series Switch Command Reference—Release 8.1 78-15474-01 displaying con tents of system module initiation log 2-874 displaying st atu s and inf orm ati on 2-871 enab lin g 2-376 naming 2-378 See also MSM See also NA M shutting down NAM and IDS module s 2-380 turning off po wer to mo dule 2-379 turning on pow er to modu ...

  • Cisco Systems 6500 - page 1266

    Index IN- 14 Catalyst 6500 Series S witch Command Reference—Release 8.1 78-15474-01 enabl ing SN MP ext ende d RMO N sup por t 2-563 setting boot envi ronment 2-238 shutting down module 2-380 naming module 2-378 system 2-653 NDE displaying i nform ation displaying M LS Layer 3 pa cket infor mation 2-864 NDE fil ter resetting 2- 65 NetFlow Data Ex ...

  • Cisco Systems 6500 - page 1267

    Inde x IN- 15 Catalyst 6500 Series Switch Command Reference—Release 8.1 78-15474-01 policy-b ased forw arding See PBF Port Aggreg ation Pro tocol See PAgP port coun t ers displaying 2-926 restorin g 2-202 port mapping clearin g 2-18 port nam e setting 2-438 port roles clearin g 2-79 crea ting 2-406 ports clearing MAC addr esses from secure MAC ad ...

  • Cisco Systems 6500 - page 1268

    Index IN- 16 Catalyst 6500 Series S witch Command Reference—Release 8.1 78-15474-01 displaying po rts running test 2-950 starting a nd stop ping test 2-1177 privat e VL AN See PVLAN privi leged level setting password 2-265 privi leged mode activat ing 2-176 return ing to norm al mod e 2-170 process util ization displaying i nform ation 2-980 pr o ...

  • Cisco Systems 6500 - page 1269

    Inde x IN- 17 Catalyst 6500 Series Switch Command Reference—Release 8.1 78-15474-01 setting default for all packets ar r iving th rough untruste d port 2-446 setting p acket buf fer memory 2-508, 2-515 setting packet value 2-446 setting p olicy source t o COPS-PR 2-504 setting policy source to local NVRAM 2-504 setting port policy source 2-442 se ...

  • Cisco Systems 6500 - page 1270

    Index IN- 18 Catalyst 6500 Series S witch Command Reference—Release 8.1 78-15474-01 setting encry ption and authentica tion 2-523 setting time betwee n retransmissions 2-526 setting up RADIUS server 2-525 specifying RADIUS retransmit times 2-524 rate-limit er information displaying 2-1019 rcp clearing information 2-99 copying so ftw are i mage to ...

  • Cisco Systems 6500 - page 1271

    Inde x IN- 19 Catalyst 6500 Series Switch Command Reference—Release 8.1 78-15474-01 S securit y access lists See se curity ACL security ACL clearin g changes fr om edit buf fer 2-203 committing to NVRAM 2-150 configur ing adjacency 2-532 configurin g log table 2-546 creat ing new ent ry in non-IP V ACL 2-548 creat ing new ent ry in non-IPX VACL 2 ...

  • Cisco Systems 6500 - page 1272

    Index IN- 20 Catalyst 6500 Series S witch Command Reference—Release 8.1 78-15474-01 displayi ng gr oup or u sers w it h commo n ac cess policy 2-1054 displaying i nform ation 2-1040 displaying information for specifi c user 2-1064 displaying interface aliases 2-1056 displayi ng local en gine ID 2-1053 displaying M IB view conf iguration 2-1066 di ...

  • Cisco Systems 6500 - page 1273

    Inde x IN- 21 Catalyst 6500 Series Switch Command Reference—Release 8.1 78-15474-01 displaying path cost fo r instance s 2-1094 displaying po rtfa st i nfor ma tion 2-1093 displaying po rt inf orma tio n 2-959, 2-1070 displaying statistics in formation 2-1096 displayi ng time le ft bef ore en tr y expi res 2-1080 displaying Upl inkFas t set tings ...

  • Cisco Systems 6500 - page 1274

    Index IN- 22 Catalyst 6500 Series S witch Command Reference—Release 8.1 78-15474-01 comman d-l ine p roce ssing 1-3 comm an d m od es 1-3 console p ort 1-2 designati ng module s 1-10 help switch CLI 1-9 history substitution 1-8 IP addresses 1-11 IP aliase s 1-11 MAC addr esses 1-11 operati ng 1-3 Telne t 1-2 swit ch fabr ic channel displayi ng co ...

  • Cisco Systems 6500 - page 1275

    Inde x IN- 23 Catalyst 6500 Series Switch Command Reference—Release 8.1 78-15474-01 setting severity level 2-350 system modem disabling 2-652 enab lin g 2-652 system name config uring 2-653 system switching mode setting 2-656 T tables character s with special meanin g 1-13 special ch aracters multiplier s, table 1-15 spec ial charact ers used f o ...

  • Cisco Systems 6500 - page 1276

    Index IN- 24 Catalyst 6500 Series S witch Command Reference—Release 8.1 78-15474-01 Terminal Access Contr o ller Ac cess Control System Plus See TACACS+ terminal display setting default number of lines on screen 2-335 setting number of lines on scre en 2-335 text m ode config uring t ext m ode 2-255 displaying t ext mode 2-739 time-stamp d isplay ...

  • Cisco Systems 6500 - page 1277

    Inde x IN- 25 Catalyst 6500 Series Switch Command Reference—Release 8.1 78-15474-01 displayi ng V ACL- t o-VL AN mappi n g 2-1038 mapping existin g VACL-to-VLAN 2-550 removi ng all ACEs fr om VACL 2-101 removi ng VACL fr om edi tbuffer 2-101 removi ng VACL-to -VLAN ma pping 2-105 setting ports to capture traff ic 2-535 VACL loggin g clearing all ...

  • Cisco Systems 6500 - page 1278

    Index IN- 26 Catalyst 6500 Series S witch Command Reference—Release 8.1 78-15474-01 displaying V TP domain inform ation 2-1162 displaying VT P statistics 2-1164 ena bling and disab ling o n a per- port ba sis 2-464 enab l ing VT P p run in g 2-690 setting options 2-690 setting version 2 mode 2-690 setting VTP domain name 2-690 setting VTP mode 2- ...

Manufacturer Cisco Systems Category Switch

Documents that we receive from a manufacturer of a Cisco Systems 6500 can be divided into several groups. They are, among others:
- Cisco Systems technical drawings
- 6500 manuals
- Cisco Systems product data sheets
- information booklets
- or energy labels Cisco Systems 6500
All of them are important, but the most important information from the point of view of use of the device are in the user manual Cisco Systems 6500.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Cisco Systems 6500, service manual, brief instructions and user manuals Cisco Systems 6500. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Cisco Systems 6500.

Similar manuals

A complete manual for the device Cisco Systems 6500, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Cisco Systems 6500 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Cisco Systems 6500.

A complete Cisco Systems manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Cisco Systems 6500 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Cisco Systems 6500, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Cisco Systems 6500, that we can find in the current document
3. Tips how to use the basic functions of the device Cisco Systems 6500 - which should help us in our first steps of using Cisco Systems 6500
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Cisco Systems 6500
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Cisco Systems 6500 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Cisco Systems 6500?

Use the form below

If you did not solve your problem by using a manual Cisco Systems 6500, ask a question using the form below. If a user had a similar problem with Cisco Systems 6500 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)