Manual Cisco Systems 1.3.0

244 pages 1.99 mb
Download

Go to site of 244

Summary
  • Cisco Systems 1.3.0 - page 1

    VOCAL V ovida Op en Communicatio n Application Libr ary System Administration G uide Softwar e V ersion 1. 3.0 ...

  • Cisco Systems 1.3.0 - page 2

    ii Copyright Copyri ght © 2001 , Cisco Sys tems, Inc. Guide V ersions The followi ng t able matche s the software versi ons wit h the guide versions : Ve r s i o n This manual is w ritt en to suppor t VOCAL V ersion 1.3. 0. Support The pr imary locat ion for support, informati on and a ssist ance for t he VOCAL system is http ://www .vovi da.org/ ...

  • Cisco Systems 1.3.0 - page 3

    3U HIDFH Introduct ion This chapt er i s a general introduc tion to the Syst em Administrati on manual , and provides inf or mation about the inten tions and organizat i on of the manual. It also provi des informati on about additiona l res ources avail abl e from http://www .vovida. org . Objectives This gui de provides Infor mation about adding u ...

  • Cisco Systems 1.3.0 - page 4

    iv Document ation Conventions The followi ng is a l ist of convention s used in this guide: Additional resources Publica tions An Inst allat ion Guide , whic h includes a system overvi ew , inst alla tion instruc tions and informat i on about provis ioning the server s is also availab le from http://www .vovida. org . On Line Resources V ovida.org ...

  • Cisco Systems 1.3.0 - page 5

    T able of Conten t s v Preface Chapter 1. Setting Up Users Working W it h The GUI Enviro nment . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Adding, Viewing, Edi ting, and Deleti ng Users . . . . . . . . . . . . . . . . . . 1-9 Chapter 2. Network Management SNMP Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Cisco Systems 1.3.0 - page 6

    vi T able of Conten t s (continued) ...

  • Cisco Systems 1.3.0 - page 7

    6HWWLQJ8S8VHUV This chapter desc ri bes how to add users to the system and how to maintai n the user dat a base. T opic See Page Working With The GUI Environment. . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Logging I n . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 Overview of the Use ...

  • Cisco Systems 1.3.0 - page 8

    1-2 Wo rking W ith The GUI Environment W orking With The GUI Environment Overview This sect i on describes: • the login screen a nd how to log into t he VOCAL sys tem • the user configurat ion screen and avai lable t he buttons, options boxes, and data fi elds. Before you begin The machine that was use d to inst all the VOCAL syst em is known a ...

  • Cisco Systems 1.3.0 - page 9

    Wor king Wit h The GUI Environment 1-3 Loggi ng In Introduct ion The Provis ion ing Login scre en provi des access for Adminis tr ators to work with th e users, and for T ec hnicians to work with t he servers . Definition The l ogin screen is a java-enabl ed graphical user interface (GUI) tha t runs in a web browser . The browser can be any type th ...

  • Cisco Systems 1.3.0 - page 10

    1-4 Wo rking W ith The GUI Environment Items and Fields T able 1-2 describes the items found on the Login Screen. Password Administrat ion There is a separ at e user inter fac e for changing pa s swords and adding or removing account s for admini strators and te chnicia n s. It is not setup as an applet, but you can run it st and alone. It is inclu ...

  • Cisco Systems 1.3.0 - page 11

    Wor king Wit h The GUI Environment 1-5 Overview of the Us er Configuratio n Screen Introduct ion This sect ion desc ribes the butt ons, opt ion boxe s, and dat a fi elds on th e User Configurat ion Screen. Screen Capture Figures 1-2 and 1-3 show the User Confi gurat ion screen as it appears whe n you login. Figur e 1-2 shows what the scr een looks ...

  • Cisco Systems 1.3.0 - page 12

    1-6 Wo rking W ith The GUI Environment After Dat a Entry Fi gure 1-3 shows what the screen looks li ke af ter some users have been added. For more infor mation about adding user s, see “ Adding New Users ” on page 1-10 . Figure 1-3. User Confi gurat ion Screen: Aft er Data Entr y Buttons T able 1-4 describes but tons on the User Con figura tion ...

  • Cisco Systems 1.3.0 - page 13

    Wor king Wit h The GUI Environment 1-7 Option Boxes The optio n box es filt er t he fi eld s displ aye d on t he Use r Co nfigur ation scr een. If none of the boxes is sel ected, onl y the Name, User Group, IP and Marsha l fields appea r . If all of t he boxes are selected, th en all of the fields appear on the User Configurati on screen. For a com ...

  • Cisco Systems 1.3.0 - page 14

    1-8 Wo rking W ith The GUI Environment Right-Mouse-Cl ick Menu Options T able 1-6 shows the options avai lable from the right -mouse-cli ck menu. Option Boxes If you select eit her Edit or New , you must select at least one opti on box as well. Depending on which option boxes ( show aliases , show admi n dat a , and/or show user dat a ) are checked ...

  • Cisco Systems 1.3.0 - page 15

    Adding, V iewing, Edit ing, and Del eting Use rs 1-9 Adding, V iewing, Editing, and Deleti ng Users Introduct ion The ” W ork ing With Th e GUI Envi ronment ” sec tion dis cussed the GUI buttons, option boxes an d a right -mouse cli ck menu t hat enables adding, viewing, editi ng and deleting user s. This section pr ovides informat io n about u ...

  • Cisco Systems 1.3.0 - page 16

    1-10 Adding, V iewing, Editing, and Dele ting Users Adding New Users Introduct ion This secti on describes how to add new users. Procedure: Addi ng a New User T o add a new user , f ollow thes e step s: T able 1-7. Adding New Users St ep Action 1 Select the Show ad min dat a option box. 2 Right-mouse click and sel ect New . 3 The Edit us er screen ...

  • Cisco Systems 1.3.0 - page 17

    Adding, V iewing, Edit ing, and Del eting Use rs 1-1 1 Adding Us ers: Administ rator ’ s Ed it Us er Scre en Edit User Screen Figure 1-5 illustr ates the edit user screen that appear s whe n the show administrat or dat a option box is checked. Figure 1- 5. Edit User Screen: Show Admi n Data Name Specify the name of the user in alph anumeric chara ...

  • Cisco Systems 1.3.0 - page 18

    1-12 Adding, V iewing, Editing, and Dele ting Users Group This field is a text identifier t o help you classify your users. Marshal Group Allows yo u to s elect a User Agent Marshal server gr oup fr om the pull down menu. The l ist of marshal server gr oups i n the pull down menu corresponds to the marshal serv er group s provis ioned under servers ...

  • Cisco Systems 1.3.0 - page 19

    Adding, V iewing, Edit ing, and Del eting Use rs 1-13 JT API Check t he Enable d option bo x to e nable the J T A PI feature. With t his featur e enabled the user can pla ce calls using a JT API User Agent. Note Y ou must load a Java application, su ch as the JT API User Agent application that is bundle d with VOCAL, to work with this JT API featur ...

  • Cisco Systems 1.3.0 - page 20

    1-14 Adding, V iewing, Editing, and Dele ting Users Call Screening Option Box Check the Enabled opt ion box t o enabl e the Call Scr eening feat ure for the user . Note For version 1. 3.0 of VOCAL, phone numbers entered for call screening must incl ude the ar ea code, regardless if t hey are local or long-dis ta nce phone numbers. Call Pro cessing ...

  • Cisco Systems 1.3.0 - page 21

    Adding, V iewing, Edit ing, and Del eting Use rs 1-15 Call Return Option Box Check the Call Retur n option bo x to enable the Cal l Retur n feature for the user . Pull Down Menu The pull do wn menu allows you t o select a Feature server gr oup from the pull down menu. The list of Feature ser ver gr oups i n the pull down menu corresponds t o the Fe ...

  • Cisco Systems 1.3.0 - page 22

    1-16 Adding, V iewing, Editing, and Dele ting Users V iewing Users: Ind ividually Introduct ion This sect ion des cribes how to view r ecords for indi vidual us ers. If you have thousands of users loaded i nto your system, y ou wil l find that it is faster t o load the dat a for individual users, or small group s of users, as required, rather than ...

  • Cisco Systems 1.3.0 - page 23

    Adding, V iewing, Edit ing, and Del eting Use rs 1-17 Screen Capture : Viewi ng A Single User Figure 1-6 illustr ates sele cti ng the dat a for a single user . Figure 1-6. Displ ayi ng Data for a Single User 1. Sele c t a re c o rd 2. Right mouse click, selec t View The data is displayed for the 3. Select disp la y options ...

  • Cisco Systems 1.3.0 - page 24

    1-18 Adding, V iewing, Editing, and Dele ting Users Screen Capture : V iewing Small Group s of Users Figure 1-7 illustr ates sele cting the dat a for a small group of users . Figure 1- 7. Displayi ng Data for Small Group s of Users Load all Users T o view informat ion f or all users, select the Load all users button as shown in Figure 1-8 on page 1 ...

  • Cisco Systems 1.3.0 - page 25

    Adding, V iewing, Edit ing, and Del eting Use rs 1-19 V iewin g Users: Dat a Fiel ds Descri ptions Introduct ion Dif ferent dat a fields appear in the user confi guration scr een depending on the option boxes sel ect ed. Default Dat a Fields When none of the option boxes are check ed, the user configur ation screen displays t hese defau lt dat a f ...

  • Cisco Systems 1.3.0 - page 26

    1-20 Adding, V iewing, Editing, and Dele ting Users Forward Busy/No Ans. Group Indicates the name o f t he ForwardBus yNoAnswer Feature server gro up. Failure Case Indicates the number or address to for ward calls to there is a problem wit h cont acting the destination c alled party . Call Screen Enable d Indicat es whether the Cal l Scre en featur ...

  • Cisco Systems 1.3.0 - page 27

    Adding, V iewing, Edit ing, and Del eting Use rs 1-21 Call Return Enabled Indicates whether the Call Retur n feature is enabled for t he user: • Deselected : in dicates t hat this fe ature is disable d for the use r . • Selected: indi cates tha t this fea ture is enabl ed for the user . Call Return Group Indicates the name of the CallReturn Fea ...

  • Cisco Systems 1.3.0 - page 28

    1-22 Adding, V iewing, Editing, and Dele ting Users User Dat a Field When the Show user dat a option box is checked, these data fi eld appear in addition to the default data fields: T able 1- 1 1. User Data Fields Field Descript ion Forward All Set Indicates whether Forward All feature is set by the user: • OFF: indicates tha t call forwar ding o ...

  • Cisco Systems 1.3.0 - page 29

    Adding, V iewing, Edit ing, and Del eting Use rs 1-23 900 # User Block Indicates wheth er 900 Number Block feature i s set by the user : • Deselected: in dicates t hat 900 Number block is not en abled by the user . 90 0 numbers are not blocked and user can dial 900 numbers. • Selected: indi cates that 900 Number block i s enabled by the user . ...

  • Cisco Systems 1.3.0 - page 30

    1-24 Adding, V iewing, Editing, and Dele ting Users V iewing Users: All Use rs Introduct ion This secti on explains how to use the Load all users but ton and the option boxes to view use r dat a. Overview For s ituations where you n eed to compare t he dat a between users, you can click the Load al l user s button. Thi s button act ivat es a pro gr ...

  • Cisco Systems 1.3.0 - page 31

    Adding, V iewing, Edit ing, and Del eting Use rs 1-25 Load All Users Figure 1-8 shows the use of the Load all users butto n. Figure 1-8. User Confi gurat ion Screen: Loading All Users 1. Cl ick Load all 3. Use t he 2. Select options users The dat a is displa yed. horizont al scroll bar to se e the other fi el ds. ...

  • Cisco Systems 1.3.0 - page 32

    1-26 Adding, V iewing, Editing, and Dele ting Users Finding Users Introduct ion Y ou can highlight any of the users by cl icki ng thei r rec ord with the mouse. If you have t housands of users, the Fi nd User uti lity will make your searc h easier . Procedure: Fin ding Users The Fi nd button ac tivates a progra m that automatical ly searches the Na ...

  • Cisco Systems 1.3.0 - page 33

    Adding, V iewing, Edit ing, and Del eting Use rs 1-27 Deleting Users Deleting User T o delet e a user or multipl e users, foll ow these st eps: T able 1- 14. Procedure for Deleti ng Users St ep Action 1 T o select a user , lef t mouse click on a row in the t able. T o select mult iple users, hold down the shift key while lef t mouse clicking the ro ...

  • Cisco Systems 1.3.0 - page 34

    1-28 Adding, V iewing, Editing, and Dele ting Users Editing Users: Admin istrator Controlled Introduct ion This secti on describes how to edit user s. Procedure: Edi ting a User T o edit a user , follow these steps: Procedure: Edi ting Mult iple U ser s T o edit multiple use rs, f ollow th ese step s: Note When you edit multipl e user s, only one e ...

  • Cisco Systems 1.3.0 - page 35

    Adding, V iewing, Edit ing, and Del eting Use rs 1-29 Editing User: Sho w Alias Introduct ion The aliases names associ ated with each users can be disp layed using t he show alias op ti on box. User names with alias es appear in it alics. What ’ s an Alias? An alias is another addres s o r phone number by whic h a user can be reached. A teleph on ...

  • Cisco Systems 1.3.0 - page 36

    1-30 Adding, V iewing, Editing, and Dele ting Users Editing User Features: User Contro lled Introduct ion The VOCAL system provides a web page for users to maint ai n some of their features. These feat ures are call User Control led Features and they i n cl ude: • JT API • Forward all cal l s • Call blocki ng • Call sc reening • Caller ID ...

  • Cisco Systems 1.3.0 - page 37

    Adding, V iewing, Edit ing, and Del eting Use rs 1-31 Editing User Feature: Edit Us er Screen Show User Dat a Vi ew Figure 1- 10 illustrate s the edit user screen tha t appears when Show user dat a option box checked and the edi t right mouse opti on is used. This screen displays features t hat can be enabled by the user . Thi s screen is provided ...

  • Cisco Systems 1.3.0 - page 38

    1-32 Adding, V iewing, Editing, and Dele ting Users Aliases Thi s field disp lays aliases asso ciated wit h thi s user . T o add aliases for t he user: 1) Right mouse clic k over the Alias area and sele ct add. 2) T ype the ali as name for the user . T o remove aliases, right mouse clic k the alias name and selec t remove. JT API The user can use a ...

  • Cisco Systems 1.3.0 - page 39

    Adding, V iewing, Edit ing, and Del eting Use rs 1-33 Call Screening The user c an scree n a call by name and nu mber . T o add numbers to s creen: 1) Right mouse clic k near the name and numbe r box. Select Add. 2) A Screen Calls From di alog box appears . Enter the name an d number to screen. Cli ck OK. The format is the user ID, for example, 700 ...

  • Cisco Systems 1.3.0 - page 40

    1-34 Adding, V iewing, Editing, and Dele ting Users ...

  • Cisco Systems 1.3.0 - page 41

    1HWZ RU N0DQD JHPHQW This chapter desc ri bes net work management and stat istics for the VOCAL system. T opic See Page SNMP Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 MIB s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3 VOCA L SN MP G ...

  • Cisco Systems 1.3.0 - page 42

    2-2 SNMP Support SNMP Support Overview VOCAL support s Simple Networ k Ma nagement Pr otocol (SNMP) mon it ori ng from : • the VOCAL SNMP GUI - this support s monitori ng of VOCAL server stat us. • a third p arty SNMP network manager . SNMP V ersion VOCAL support s SNMP versi on 2 (R FCs 1441 to 1 452). ...

  • Cisco Systems 1.3.0 - page 43

    SNMP Support 2-3 MIBs Introduct ion In a TCP/IP-based network, each devic e maint ains a set of variabl es describi ng its st ate. I n Simple Network Management Prot ocol (SNMP), these variabl es are known as objec ts , but t hese object s d o not h old the s ame meaning as t hose withi n an ob ject-ori ented progr amming archit ecture. SNMP object ...

  • Cisco Systems 1.3.0 - page 44

    2-4 SNMP Support VOCAL Enterprise MIB For mor e informat ion r efer to the /u sr/local /vocal/ proxies/n etMgnt di rectory: • VOVIDA-LOCAL-GRP-MIB.tx t • VOVIDA-NOTIFICA TION S-MIB.txt • VOVIDA-SERVERGRP-MIB. txt • VOVIDA-SOFTSWITCHST A TS-MIB.txt • VOVIDA-SUBSCRIBERST A TS-MIB.txt ...

  • Cisco Systems 1.3.0 - page 45

    SNMP Support 2-5 VOCAL SNMP GUI Server St atus Monitoring Each VOCAL syste m server send s (vi a multicas t) heart beat p acket s to it s peers at a predefi ned int erval. The Heartb eat Server monit or s the exchange of heart beat p acket s betwee n VOCAL servers and sends server st atus trap messages to the network management system. The network ...

  • Cisco Systems 1.3.0 - page 46

    2-6 SNMP Support VOCAL SNMP GUI Screen Elements Host s & Processes This fr ame displays the host server and indi cates whether they are active (blue) or i nactive (red) . If a host server cont ains several processes, it wil l display a red ball if one or more of the processe s is inactive. SNMP Controller The process contro ller all ows you t o ...

  • Cisco Systems 1.3.0 - page 47

    )HD WXU HV This chapter desc ri bes features suppor ted by the VOCAL system. T opic See Page Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2 Core System Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-3 Set-Based Features . . . . . . . . . . . . . . . ...

  • Cisco Systems 1.3.0 - page 48

    A-2 Features Features Introduct ion This sect ion descri bes t he types of feature supported by the VOCAL system. Overview The VOCAL sy stem suppor ts t wo types of feat ures — cor e syst em features and set-based feat ures. Core System Feat ures Core system featur es are those that involve rerout ing calls under certai n conditi ons, such as the ...

  • Cisco Systems 1.3.0 - page 49

    Core System Features A-3 Core System Features T ypes of Core System Features There are two types of system features — calli ng features and call ed features. The call ing featur es are assigned t o the cal l origi nator . The ca lled feat ures are assi gned to the call ing desti nation. Call Blocking The adminis trator or the user can turn on cal ...

  • Cisco Systems 1.3.0 - page 50

    A-4 Core System Feat ures Call Return Call r eturn all ows the user to call back the last call er . The user dials * 69 to dial up the last caller . Call Screening Call screening all ows the user to block cal ls from a list of numbers. For example, when an screened number call s the user , the caller will receive a busy signal . When call s creenin ...

  • Cisco Systems 1.3.0 - page 51

    Set-Based Features A-5 Set-Based Features Definition Set based f eatures ar e features that a user can enable from a phone set. These feat ures are an example of how SIP-ba sed networ ks are abl e to transfer much of i t s intel ligence t o it s end-po int s. Many SIP IP phone sets have a vari et y of “ smart ” feat ures. The VOCAL system suppo ...

  • Cisco Systems 1.3.0 - page 52

    A-6 Set-Based Feat ures AdHoc Conferencing The Conference k ey on a phone set allows the user t o set up a confer ence call wi th a number of peop le. T o set up a confer ence cal l: • Call t he first p erson. Press t he conference button to place the f irst ca ller on hold. • Call the s econd pers on. Pres s the conf erence bu tton to add the ...

  • Cisco Systems 1.3.0 - page 53

    6XSSRU WHG6,30HVVD JHV T opic See Page SIP Request Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-2 SIP Response Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B -3 ...

  • Cisco Systems 1.3.0 - page 54

    B-2 SIP Request Messages SIP Request Messages Supported SIP Request Messages The VOCAL system support s these SIP r equest messages: T able B-1. SIP Request Messages Descriptions SIP Request Messages Descriptions INVITE Indicat es that th e user or service is being invited t o p articip ate in a ses sion. ACK Confirms that the cl ien t has received ...

  • Cisco Systems 1.3.0 - page 55

    SIP Response Messages B-3 SIP Response Messages SIP Response Messages Category The VOCAL system support s all SI P respon se messages: • 1xx Responses - Infor mation Responses • 2xx Responses - Successfu l Responses • 3xx Responses - Redirect i on Responses • 4xx Responses - Request Fail ures Responses • 5xx Responses - Server Fai lure Re ...

  • Cisco Systems 1.3.0 - page 56

    B-4 SIP Response Messages • 409 Conflict • 410 Gone • 41 1 Length Requir ed • 413 Request Entity T oo Large • 414 Request- URI T oo Large • 415 Unsupported Media T ype • 420 Bad Extensio n • 480 T emporarily not available • 481 Call Leg/T r ansaction Does Not Exist • 482 Loop Detected • 483 T oo Many Hops • 484 Address Incom ...

  • Cisco Systems 1.3.0 - page 57

    &DOO)OR ZV This chapter pr ovi des call flows di agram and IP tr a ce logs for several call scenarios. T opic See Page SIP Phone: Registrat ion. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-3 Registrat ion: Acces s List Authentic ation . . . . . . . . . . . . . . . . . . . . . . C -4 Regis tratio n: D igest Aut hent ...

  • Cisco Systems 1.3.0 - page 58

    C-2 T opic ( continued) See Page User Agent t o User Agent: Consul ted Tr ansfer. . . . . . . . . . . . . . . . C-103 User Agent to User Agent: Blind Trans fer . . . . . . . . . . . . . . . . . . . . C-122 JTAP I . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-140 Ad Hoc Conference Call Between ...

  • Cisco Systems 1.3.0 - page 59

    SIP Phone: Registrati on C-3 SIP Phone: Registration Call Scenario Figur e C-1 illustr ates a SIP phone register ing with the Marshal ser ver . Authenticat ion Methods There are three regist ration methods, no aut henticati on, access list authentic ation or digest authentic ation. T able C-1 shows t he authent ication criteria used by each meth od ...

  • Cisco Systems 1.3.0 - page 60

    C-4 SIP Phone: Regist ration Registration: Access List A uthentication Call Flow Diagram Fi gur e C-2 shows a SIP IP phone registering with the Redir ect ser ver . The User Agent Marshal ser ver is using the Access Li st authentica tion method. Figure C-2. Call Flow Diagram: SIP Phone Registration Call T r ace The foll owing tra ce shows a SI P IP ...

  • Cisco Systems 1.3.0 - page 61

    SIP Phone: Registrati on C-5 Header: Expires: 3600 Header: Content-Length : 0 -------------------------------------- --------------------------- SIP Headers -------------------------------------- --------------------------- sip-res: SIP/2.0 200 OK [192.168.26 .180:5060->192.168.26.10:5060] Header: Via: SIP/2.0/U DP 192.168.26.10:5060 Header: Fro ...

  • Cisco Systems 1.3.0 - page 62

    C-6 SIP Phone: Regist ration Registration: Digest Authe ntication Call Flow Diagram Fi gur e C-3 shows a SIP IP phone registering with the Redir ect ser ver . The User Agent Marshal server is using the Digest authen tication method. Figure C-3. Call Flow Diagram: SIP IP Phone Registration — Dig est Authenticat ion Call T r ace The foll owing call ...

  • Cisco Systems 1.3.0 - page 63

    SIP Phone: Registrati on C-7 Header: Authorization: Digest username=”6711”,realm=”vovida.com”,uri =”sip:192.168.26.180”,response=” fee2efef60a99b4576c 0437947959deb”,nonce=”966645751”,algor ithm=MD5 Header: Contact: <sip: 6711@192.168.26.10:5060> Header: Expires: 3600 Header: Content-Length : 0 ---------------------------- ...

  • Cisco Systems 1.3.0 - page 64

    C-8 SIP IP Phone to SI P IP Phone: Cal l Setup and Disconnect SIP IP Phone to SIP IP Phon e: Call Setup and Disconn ect Call Scenario Figur e C-4 illustr ates a call between two, on-net work SIP IP phones. Figure C-4. SIP Phone t o SIP Phone Call Flow Diagrams Figures C- 5 and C-6 s how a succ essful call setup between two, on-network SIP IP phon e ...

  • Cisco Systems 1.3.0 - page 65

    C-9 SIP IP Phone to SIP IP Phone: Call Setup and Disconnect Figure C-5. Call Flow Diagram: SIP Phone to SIP Phone — Diagram 1 SIP Phone UA Marshal 1. INVITE 2. 100 Redirect Server 3. INVITE 4. 302 5. ACK 6. INVITE 7. 302 8. ACK SIP Phone 9. INVITE 10. 100 11. 180 12. 180 13. 200 14. 200 15. ACK ...

  • Cisco Systems 1.3.0 - page 66

    C-10 SIP IP Phone to SIP IP Phone: Call Setup and Disconnect Figure C-6. Call Flow Diagram: SIP Phone to SIP Phone — Diagram 2 16. ACK 17. BYE 18. BYE 19. 200 20. 200 SIP Phone UA Marshal Redirect Server SIP Phone ...

  • Cisco Systems 1.3.0 - page 67

    SIP IP Phone to SIP IP Phone: Call Setup and Disconnect C-1 1 Call T r ace The followi ng call trace shows a success ful call setup between two, on- network I P phones. In thi s example, the cal led pa rty t erminates the call. -------------------------------------- --------------------------- SIP Headers -------------------------------------- ---- ...

  • Cisco Systems 1.3.0 - page 68

    C-12 SIP IP Phone to SI P IP Phone: Cal l Setup and Disconnect Header: a=fmtp:101 0-1 1 -------------------------------------- --------------------------- SIP Headers -------------------------------------- --------------------------- sip-res: SIP/2.0 302 Moved Temporar ily [192.168.36.200:5060->192.16 8.36.180:5060] Header: Via: SIP/2.0/U DP 192 ...

  • Cisco Systems 1.3.0 - page 69

    SIP IP Phone to SIP IP Phone: Call Setup and Disconnect C-13 -------------------------------------- --------------------------- sip-req: ACK sip:5120@192.168.36.20 0:5060;user=phone SIP/2.0 [192.1 68.36.180:5060- >192.168.36.200:5060] Header: Via: SIP/2.0/U DP 192.168.36.180:5060;branch=3 Header: From: <sip:512 1@192.168.6.21:5060> Header: ...

  • Cisco Systems 1.3.0 - page 70

    C-14 SIP IP Phone to SI P IP Phone: Cal l Setup and Disconnect Header: To: <sip:5120@ 192.168.36.180:5060>;tag=c294300 02e0620-0 Header: Call-ID: c2943 000-e0563-2a1ce-2e323931@192.168 .6.21 Header: CSeq: 100 INVI TE Header: Server: Cisco IP Phone/ Rev. 1/ SIP enabled Header: Content-Length : 0 -------------------------------------- --------- ...

  • Cisco Systems 1.3.0 - page 71

    SIP IP Phone to SIP IP Phone: Call Setup and Disconnect C-15 Header: Call-ID: c2943 000-e0563-2a1ce-2e323931@192.168 .6.21 Header: Route: <sip:51 20@192.168.36.180:5060;maddr=192 .168.36.180>, <sip:5120@192.168.6.20:5060> Header: CSeq: 100 ACK Header: Content-Length : 0 -------------------------------------- --------------------------- ...

  • Cisco Systems 1.3.0 - page 72

    C-16 SIP IP Phone to Analog Phone via Gat eway SIP IP Phone to Analo g Phone via Gateway Call Scenario Figur e C-7 illustr ates a SIP phone to analog phone call made over an IP network vi a a ga teway . Figure C-7. SIP IP Phone to Analog Phone via Gateway Call Flow Diagram Fi gures C-8 and C-9 show a call or iginat ing from an o n-network SIP phone ...

  • Cisco Systems 1.3.0 - page 73

    C-17 SIP IP Phone to Analog Phone via Gateway Figure C-8. Call Flow Diagram: SIP IP Phone to SIP IP Phone via SIP Gateway — Diagr am 1 SIP Phone UA Marshal 1. INVITE 2. 100 Redirect Server 3. INVITE 4. 302 5. ACK 5300 Marshal 6. INVITE 7. 100 Cisco 5300 8. INVITE 9. 100 10. 180 11. 180 12. 180 13. 200 14. 200 15. 200 ...

  • Cisco Systems 1.3.0 - page 74

    C-18 SIP IP Phone to Analog Phone via Gateway Figure C-9. Call Flow Diagram: SIP IP Phone to SIP IP Phone via SIP Gateway — Diagr am 2 16. ACK 17. ACK 18. ACK 19. BYE 20. BYE 21. BYE 22. 200 23. 200 24. 200 SIP Phone UA Marshal Redirect Server 5300 Marshal Cisco 5300 ...

  • Cisco Systems 1.3.0 - page 75

    SIP IP Pho ne to Analog Phone via Gateway C-19 Call T r ace The foll owing tra ce shows a cal l ori ginating from an on-network SI P phone and being routed thr ough a gateway to the PSTN. -------------------------------------- --------------------------- SIP Headers -------------------------------------- --------------------------- sip-req: INVITE ...

  • Cisco Systems 1.3.0 - page 76

    C-20 SIP IP Phone to Analog Phone via Gat eway Header: a=rtpmap:101 t elephone-event/8000 Header: a=fmtp:101 0-1 1 -------------------------------------- --------------------------- SIP Headers -------------------------------------- --------------------------- sip-res: SIP/2.0 302 Moved Temporar ily [192.168.36. 200:5060- >192.168.36.180:5060] H ...

  • Cisco Systems 1.3.0 - page 77

    SIP IP Pho ne to Analog Phone via Gateway C-21 sip-req: INVITE sip:93831073@192.16 8.16.210:5060;user=phone SIP/2.0 [192.168.36.110:5060->192.168.16.210:5 060] Header: Via: SIP/2.0/U DP 192.168.36.110:5060;branch=4 Header: Via: SIP/2.0/U DP 192.168.36.180:5060;branch=2 Header: Via: SIP/2.0/U DP 192.168.6.20:5060 Header: From: <sip:512 0@192.1 ...

  • Cisco Systems 1.3.0 - page 78

    C-22 SIP IP Phone to Analog Phone via Gat eway Header: Via: SIP/2.0/U DP 192.168.6.20:5060 Header: From: <sip:512 0@192.168.6.20:5060> Header: To: <sip:93831 073@192.168.36.180:5060> Header: Call-ID: c2943 000-23e062-2e278-2e323931@192.16 8.6.20 Header: CSeq: 100 INVI TE Header: Server: Cisco VoIP Gateway/ IOS 12.x/ SIP enab led Header: ...

  • Cisco Systems 1.3.0 - page 79

    SIP IP Pho ne to Analog Phone via Gateway C-23 Header: Via: SIP/2.0/U DP 192.168.36.180:5060;branch=2 Header: Via: SIP/2.0/U DP 192.168.6.20:5060 Header: From: <sip:512 0@192.168.6.20:5060> Header: To: <sip:93831 073@192.168.36.180:5060>;tag=1AF 49448-1D50 Header: Call-ID: c2943 000-23e062-2e278-2e323931@192.16 8.6.20 Header: CSeq: 100 ...

  • Cisco Systems 1.3.0 - page 80

    C-24 SIP IP Phone to Analog Phone via Gat eway Header: CSeq: 100 ACK Header: Route: <sip:93 831073@192.168.16.210:5060> Header: Proxy-Authoriz ation: Basic VovidaClassXSwitch Header: Content-Length : 0 -------------------------------------- --------------------------- SIP Headers -------------------------------------- ------------------------ ...

  • Cisco Systems 1.3.0 - page 81

    SIP IP Pho ne to Analog Phone via Gateway C-25 Header: Via: SIP/2.0/U DP 192.168.36.180:5060;branch=4, SIP/2.0/UDP 192.168.36.110:5060;branch=2,SIP/2.0/U DP 192.168.16.210:50110 Header: From: <sip:938 31073@192.168.36.180:5060>;tag=1 AF49448-1D50 Header: To: <sip:5120@ 192.168.6.20:5060> Header: Call-ID: c2943 000-23e062-2e278-2e323931@ ...

  • Cisco Systems 1.3.0 - page 82

    C-26 SIP Phone to Phone via Gateway: Called Party is Busy SIP Phone to Phone vi a Gateway: Called Party is Busy Call Scenario Figur e C-10 illustr ates User A initi ati ng a call to User B while User B is busy . Figure C-10. SIP Phone to Phone: Call ed Party is Busy Call Flow Diagram Fi gures C-1 1 and C-12shows a call originating from an on-networ ...

  • Cisco Systems 1.3.0 - page 83

    C-27 SIP Phone to Phone via Gateway: Called Party is Busy Figure C-1 1. Call Flow Diagram: SIP Phone to Phone: Called Party is Busy — Diagram 1 SIP Phone UA Marshal 1. INVITE 2. 100 Redirect Server 3. INVITE 4. 302 5. ACK 5300 Marshal 6. INVITE 7. 100 Cisco 5300 8. INVITE 9. 100 10. 183 11. 183 12. 183 13. 200 14. 200 15. 200 ...

  • Cisco Systems 1.3.0 - page 84

    C-28 SIP Phone to Phone via Gateway: Called Party is Busy Figure C-12. Call Flow Diagram: SIP Phone to Phone: Called Party is Busy — Diagram 2 SIP Phone UA Marshal Redirect Server 5300 Marshal Cisco 5300 16. ACK 17. ACK 18. ACK ...

  • Cisco Systems 1.3.0 - page 85

    SIP Phone to Phone via Gateway: Called Party is Busy C-29 Call T r ace The followi ng call trace shows a call ori ginating fr om an on-network SIP phone, bei ng routed t hrough a gateway to the PSTN, and ret urning a busy signal. -------------------------------------- --------------------------- SIP Headers -------------------------------------- -- ...

  • Cisco Systems 1.3.0 - page 86

    C-30 SIP Phone to Phone via Gateway: Called Party is Busy Header: c=IN IP4 192.1 68.26.10 Header: t=0 0 Header: m=audio 26268 RTP/AVP 0 101 Header: a=rtpmap:0 pcm u/8000 Header: a=rtpmap:101 t elephone-event/8000 Header: a=fmtp:101 0-1 1 -------------------------------------- --------------------------- SIP Headers --------------------------------- ...

  • Cisco Systems 1.3.0 - page 87

    SIP Phone to Phone via Gateway: Called Party is Busy C-31 Header: Content-Length : 0 -------------------------------------- --------------------------- SIP Headers -------------------------------------- --------------------------- sip-req: INVITE sip:93831069@192.16 8.16.210:5060;user=phone SIP/2.0 [192.168.26.110:5060->192.168.16.210:5 060] Hea ...

  • Cisco Systems 1.3.0 - page 88

    C-32 SIP Phone to Phone via Gateway: Called Party is Busy -------------------------------------- --------------------------- SIP Headers -------------------------------------- --------------------------- sip-res: SIP/2.0 183 Session Progre ss [192.168.26.110:5060->192.168 .26.180:5060] Header: Via: SIP/2.0/U DP 192.168.26.180:5060;branch=2 Heade ...

  • Cisco Systems 1.3.0 - page 89

    SIP Phone to Phone via Gateway: Called Party is Busy C-33 -------------------------------------- --------------------------- SIP Headers -------------------------------------- --------------------------- sip-res: SIP/2.0 200 OK [192.168.26 .110:5060->192.168.26.180:5060] Header: Via: SIP/2.0/U DP 192.168.26.180:5060;branch=2 Header: Via: SIP/2.0 ...

  • Cisco Systems 1.3.0 - page 90

    C-34 SIP Phone to Phone via Gateway: Called Party is Busy Header: Via: SIP/2.0/U DP 192.168.26.10:5060 Header: From: <sip:671 1@192.168.26.10:5060> Header: To: <sip:93831 069@192.168.26.180:5060>;tag=25A 5AD44-1FE9 Header: Call-ID: c2943 000-3e262-e4dc-2e323931@192.168. 26.10 Header: CSeq: 100 ACK Header: Route: <sip:93 831069@192.16 ...

  • Cisco Systems 1.3.0 - page 91

    SIP IP Phone to SIP IP Phone: Forward All Calls C-35 SIP IP Phone to SIP IP Phon e: Forward All Calls Call Scenario Figur e C- 13 illu strates t he foll owing cal l scenari o: • User A ini tia t es a ca ll to U s e r B • User B has call f orwarding ena bled • The call is for warded t o User C Note In this example, all SIP phones are connected ...

  • Cisco Systems 1.3.0 - page 92

    C-36 SIP IP Phone to SIP IP Phone: Forward All Calls Figure C-14. Call Flow Diagram: SIP IP Phone to SIP IP Phone: Forward All Calls — Diagr am 1 SIP Phone UA Marshal 1. INVITE 2. 100 Redirect Server 3. INVITE 4. 302 5. ACK Feature Server: FAC 6. INVITE 7. 100 8. 302 9. ACK 10. 302 11. ACK 12. INVITE 13. 100 14. INVITE 15. 302 SIP Phone ...

  • Cisco Systems 1.3.0 - page 93

    C-37 SIP IP Phone to SIP IP Phone: Forward All Calls Figure C-15. Call Flow Diagram: SIP IP Phone to SIP IP Phone: Forward All Calls — Diagr am 2 SIP Phone UA Marshal Redirect Server Feature Server: FAC SIP Phone 16. ACK 17. INVITE 18. 100 19. 180 20. 180 21. 200 22. 200 23. ACK 24. ACK 25. BYE 26. BYE 27. 200 28. 200 ...

  • Cisco Systems 1.3.0 - page 94

    C-38 SIP IP Phone to SIP IP Phone: For ward All Cal ls Call T r ace The followi ng call trace shows a call ori ginating fr om an on-network SIP IP phone being forward ed to a cal l forwar d destinat ion. -------------------------------------- --------------------------- SIP Headers -------------------------------------- --------------------------- ...

  • Cisco Systems 1.3.0 - page 95

    SIP IP Phone to SIP IP Phone: Forward All Calls C-39 Header: a=rtpmap:101 t elephone-event/8000 Header: a=fmtp:101 0-1 1 -------------------------------------- --------------------------- SIP Headers -------------------------------------- --------------------------- sip-res: SIP/2.0 302 Moved Temporar ily [192.168.26.200:5060->192.16 8.26.180:50 ...

  • Cisco Systems 1.3.0 - page 96

    C-40 SIP IP Phone to SIP IP Phone: For ward All Cal ls Header: Via: SIP/2.0/U DP 192.168.26.180:5060;branch=2 Header: Via: SIP/2.0/U DP 192.168.26.10:5060 Header: From: <sip:671 1@192.168.26.10:5060> Header: To: <sip:6715@ 192.168.26.180:5060> Header: Call-ID: c2943 000-ce262-1b5c2-2e323931@192.168 .26.10 Header: CSeq: 100 INVI TE Heade ...

  • Cisco Systems 1.3.0 - page 97

    SIP IP Phone to SIP IP Phone: Forward All Calls C-41 Header: m=audio 30224 RTP/AVP 0 101 Header: a=rtpmap:0 pcm u/8000 Header: a=rtpmap:101 t elephone-event/8000 Header: a=fmtp:101 0-1 1 -------------------------------------- --------------------------- SIP Headers -------------------------------------- --------------------------- sip-res: SIP/2.0 ...

  • Cisco Systems 1.3.0 - page 98

    C-42 SIP IP Phone to SIP IP Phone: For ward All Cal ls sip-req: INVITE sip:6716@192.168.26 .12:5060 SIP/2.0 [192.168.26. 180:5060- >192.168.26.12:5060] Header: Via: SIP/2.0/U DP 192.168.26.180:5060;branch=4 Header: Via: SIP/2.0/U DP 192.168.26.180:5060;branch=2 Header: Via: SIP/2.0/U DP 192.168.26.10:5060 Header: From: <sip:671 1@192.168.26.1 ...

  • Cisco Systems 1.3.0 - page 99

    SIP IP Phone to SIP IP Phone: Forward All Calls C-43 Header: Via: SIP/2.0/U DP 192.168.26.180:5060;branch=4, SIP/2.0/UDP 192.168.26.180:5060;branch=2,SIP/2.0/U DP 192.168.26.10:5060 Header: From: <sip:671 1@192.168.26.10:5060> Header: To: <sip:6716@ 192.168.26.180:5060>;tag=c294300 0312610-0 Header: Call-ID: c2943 000-de262-1b626-2e3239 ...

  • Cisco Systems 1.3.0 - page 100

    C-44 SIP IP Phone to SIP IP Phone: For ward All Cal ls sip-req: ACK sip:6716@192.168.26.12 :5060 SIP/2.0 [192.168.26. 180:5060- >192.168.26.12:5060] Header: Via: SIP/2.0/U DP 192.168.26.180:5060;branch=4 Header: Via: SIP/2.0/U DP 192.168.26.180:5060;branch=2 Header: Via: SIP/2.0/U DP 192.168.26.10:5060 Header: From: <sip:671 1@192.168.26.10:5 ...

  • Cisco Systems 1.3.0 - page 101

    Phone to SIP Phone via Gateway: Call Screening C-45 Phone to SIP Phone via Gateway: Call Screening Call Scenario Figur e C- 16 illu strates t he foll owing cal l scenari o: • User A ini tia t es a ca ll to U s e r B • User B has call screening enabl ed • The feature s erver scr eene t he call and return s a for bidden cal l message back to th ...

  • Cisco Systems 1.3.0 - page 102

    C-46 Phone to SIP Phone via Gateway: Call Screening Figure C-17. Call Flow Diagram: Call Screening SIP Phone UA Marshal 1. INVITE 2. 100 Redirect Server 3. INVITE 4. 302 5. ACK Feature Server: Call Screening 6. INVITE 7. 100 8. INVITE 9. 302 10. ACK 11. 403 12. ACK 13. 403 14. ACK ...

  • Cisco Systems 1.3.0 - page 103

    Phone to SIP Phone via Gateway: Call Screening C-47 Call T r ace The foll owing call tr ace shows a c all, originat ing from an o n-network SIP IP phone, bei ng scree ned by the f eature ser ver . -------------------------------------- --------------------------- SIP Headers -------------------------------------- --------------------------- sip-req ...

  • Cisco Systems 1.3.0 - page 104

    C-48 Phone to SI P Phone via Gateway: Call Screening Header: a=fmtp:101 0-1 1 -------------------------------------- --------------------------- SIP Headers -------------------------------------- --------------------------- sip-res: SIP/2.0 302 Moved Temporar ily [192.168.26.200:5060->192.16 8.26.180:5060] Header: Via: SIP/2.0/U DP 192.168.26.18 ...

  • Cisco Systems 1.3.0 - page 105

    Phone to SIP Phone via Gateway: Call Screening C-49 Header: Via: SIP/2.0/U DP 192.168.26.180:5060;branch=2 Header: Via: SIP/2.0/U DP 192.168.26.11:5060 Header: From: <sip:671 5@192.168.26.11:5060> Header: To: <sip:6711@ 192.168.26.180:5060> Header: Call-ID: c3943 000-6978b-2995c-2e323931@192.168 .26.11 Header: CSeq: 100 INVI TE Header: ...

  • Cisco Systems 1.3.0 - page 106

    C-50 Phone to SI P Phone via Gateway: Call Screening Header: Content-Length : 0 -------------------------------------- --------------------------- SIP Headers -------------------------------------- --------------------------- sip-res: SIP/2.0 403 Forbidden [192 .168.26.180:5060->192.168.26.11: 5060] Header: Via: SIP/2.0/U DP 192.168.26.11:5060 H ...

  • Cisco Systems 1.3.0 - page 107

    SIP Phone t o PSTN: Call Blocking C-51 SIP Phone to PSTN: Call Blocking Call Scenario Figur e C- 16 illu strates t he foll owing cal l scenari o: • User A i nitiates a lo ng dist ance or 1-900 number call • The VOCAL System blocks the call Figure C-18. SIP IP Phone to Phone: Call Blocking Call Flow Diagram Fi gure C-19 shows a cal l, origi nati ...

  • Cisco Systems 1.3.0 - page 108

    C-52 SIP Phone to PSTN: Call Blocking Figure C-19. Call Flow DIagram: SIP IP Phone to PSTN: Call Blocking SIP Phone UA Marshal 1. INVITE 2. 100 Redirect Server 3. INVITE 4. 302 5. ACK Feature Server: Call Blocking 6. INVITE 7. 100 8. 403 9. ACK 10. 403 ...

  • Cisco Systems 1.3.0 - page 109

    SIP Phone t o PSTN: Call Blocking C-53 Call T r ace The foll owing call tr ace shows a c all, originat ing from an o n-network SiP IP phone, bei ng blocked by the feature ser ver . -------------------------------------- --------------------------- SIP Headers -------------------------------------- --------------------------- sip-req: INVITE sip:914 ...

  • Cisco Systems 1.3.0 - page 110

    C-54 SIP Phone to PSTN: Call Blocking Header: a=rtpmap:101 t elephone-event/8000 Header: a=fmtp:101 0-1 1 -------------------------------------- --------------------------- SIP Headers -------------------------------------- --------------------------- sip-res: SIP/2.0 302 Moved Temporar ily [192.168.26. 200:6060- >192.168.26.180:6060] Header: Vi ...

  • Cisco Systems 1.3.0 - page 111

    SIP Phone t o PSTN: Call Blocking C-55 sip-res: SIP/2.0 403 Forbidden [192 .168.26.220:6072->192.168.26.180 :6060] Header: Via: SIP/2.0/U DP 192.168.26.180:6060;branch=2 Header: Via: SIP/2.0/U DP 192.168.26.12:5060 Header: From: <sip:671 5@192.168.26.12:5060> Header: To: <sip:91408 3831059@192.168.26.180:5060> Header: Call-ID: c2943 ...

  • Cisco Systems 1.3.0 - page 112

    C-56 SIP IP Phone to SI P IP Phone: Cal l Retu rn SIP IP Phone to SIP IP Phon e: Call Return Call Scenario Figur e C- 20 illu strates t he foll owing cal l scenari o: • User A di als *69 t o deter mine the l ast numbe r that was called, User B • User A cal ls User B Figure C-20. SIP Phone to SIP Phone: Call Return Call Flow Diagram Fi gures C-2 ...

  • Cisco Systems 1.3.0 - page 113

    C-57 SIP IP Phone to SIP IP Phone: Call Return Figure C-21. SIP IP Phone to SIP IP Phone: Call Return — Diagr am 1 SIP Phone UA Marshal 1. INVITE 2. 100 Redirect Server 3. INVITE 4. 302 5. ACK Feature Server: Call Return 6. INVITE 7. 100 8. INVITE 9. 302 10. ACK 11. INVITE 12. 100 13. INVITE 14. 302 15. ACK SIP Phone ...

  • Cisco Systems 1.3.0 - page 114

    C-58 SIP IP Phone to SIP IP Phone: Call Return Figure C-22. SIP IP Phone to SIP IP Phone: Call Return — Diagr am 2 SIP Phone UA Marshal Redirect Server Feature Server: Call Return SIP Phone 16. INVITE 17. 100 18. 180 19. 180 20. 180 21. 180 22. CANCEL 23. 200 24. CANCEL 25. 200 26. CANCEL 27. 200 28. CANCEL 29. 200 30. INVITE 31. 100 ...

  • Cisco Systems 1.3.0 - page 115

    C-59 SIP IP Phone to SIP IP Phone: Call Return Figure C-23. SIP IP Phone to SIP IP Phone: Call Return — Diagr am 3 SIP Phone UA Marshal Redirect Server Feature Server: Call Return SIP Phone 32. INVITE 33. 302 34. ACK 35. INVITE 36. 100 37. 302 38. ACK 39. 302 40. ACK 41. INVITE 42. 100 43. INVITE 44. 302 45. ACK 46. INVITE 47. 100 ...

  • Cisco Systems 1.3.0 - page 116

    C-60 SIP IP Phone to SIP IP Phone: Call Return Figure C-24. SIP IP Phone to SIP IP Phone: Call Return — Diagr am 4 SIP Phone UA Marshal Redirect Server Feature Server: Call Return SIP Phone 48. 180 49. 180 50. 200 51. 200 52. ACK 53. ACK 54. BYE 55. BYE 56. 200 57. 200 ...

  • Cisco Systems 1.3.0 - page 117

    SIP IP Phone to SIP I P Phone: Call Return C-61 Call T r ace The followi ng call tr ace shows a call ret urn req uest leadi ng to an esta blished call between two on- network SIP IP phones. -------------------------------------- --------------------------- SIP Headers -------------------------------------- --------------------------- sip-req: INVIT ...

  • Cisco Systems 1.3.0 - page 118

    C-62 SIP IP Phone to SI P IP Phone: Cal l Retu rn Header: a=fmtp:101 0-1 1 -------------------------------------- --------------------------- SIP Headers -------------------------------------- --------------------------- sip-res: SIP/2.0 302 Moved Temporar ily [192.168.26.200:5060->192.16 8.26.180:5060] Header: Via: SIP/2.0/U DP 192.168.26.180:5 ...

  • Cisco Systems 1.3.0 - page 119

    SIP IP Phone to SIP I P Phone: Call Return C-63 Header: Via: SIP/2.0/U DP 192.168.26.180:5060;branch=2 Header: Via: SIP/2.0/U DP 192.168.26.11:5060 Header: From: <sip:671 5@192.168.26.11:5060> Header: To: <sip:6711@ 192.168.26.180:5060> Header: Call-ID: c3943 000-2978b-aa0e-2e323931@192.168. 26.11 Header: CSeq: 100 INVI TE Header: Proxy ...

  • Cisco Systems 1.3.0 - page 120

    C-64 SIP IP Phone to SI P IP Phone: Cal l Retu rn -------------------------------------- --------------------------- SDP Headers -------------------------------------- --------------------------- Header: v=0 Header: o=CiscoSystemsSIP-IPPhone-UserAgent 25077 6500 IN IP4 192. 168.26.11 Header: s=SIP Call Header: c=IN IP4 192.1 68.26.11 Header: t=0 0 ...

  • Cisco Systems 1.3.0 - page 121

    SIP IP Phone to SIP I P Phone: Call Return C-65 Header: Contact: <sip: 6711@192.168.26.10:5060> Header: Content-Length : 0 Header: CC-Redirect: < sip:6711@192.168.26.180:5060>;re dir- reason=unconditional;redir-counter=0;r edir-limit=99 -------------------------------------- --------------------------- SIP Headers ---------------------- ...

  • Cisco Systems 1.3.0 - page 122

    C-66 SIP IP Phone to SI P IP Phone: Cal l Retu rn Header: To: <sip:6711@ 192.168.26.180:5060>;tag=c294300 01e2620-0 Header: Call-ID: c3943 000-2978b-aa0e-2e323931@192.168. 26.11 Header: Server: Cisco IP Phone/ Rev. 1/ SIP enabled Header: CSeq: 100 INVI TE Header: Content-Length : 0 -------------------------------------- ---------------------- ...

  • Cisco Systems 1.3.0 - page 123

    SIP IP Phone to SIP I P Phone: Call Return C-67 Header: To: <sip:6711@ 192.168.26.180:5060> Header: Call-ID: c3943 000-2978b-aa0e-2e323931@192.168. 26.11 Header: CSeq: 100 CANC EL Header: Proxy-Authoriz ation: Basic 123 Header: Content-Length : 0 -------------------------------------- --------------------------- SIP Headers ------------------ ...

  • Cisco Systems 1.3.0 - page 124

    C-68 SIP IP Phone to SI P IP Phone: Cal l Retu rn Header: User-Agent: Ci sco IP Phone/ Rev. 1/ SIP enable d Header: Accept: applic ation/sdp Header: Contact: sip:6 711@192.168.26.10:5060 Header: Content-Type: application/sdp Header: Content-Length : 219 -------------------------------------- --------------------------- SDP Headers ----------------- ...

  • Cisco Systems 1.3.0 - page 125

    SIP IP Phone to SIP I P Phone: Call Return C-69 -------------------------------------- --------------------------- sip-req: ACK sip:*69@192.168.26.200 :5060;user=phone SIP/2.0 [192.16 8.26.180:5060- >192.168.26.200:5060] Header: Via: SIP/2.0/U DP 192.168.26.180:5060;branch=1 Header: From: <sip:671 1@192.168.26.10:5060> Header: To: <sip: ...

  • Cisco Systems 1.3.0 - page 126

    C-70 SIP IP Phone to SI P IP Phone: Cal l Retu rn Header: To: <sip:*69@1 92.168.26.180:5060> Header: Call-ID: c2943 000-2e262-b27e-2e323931@192.168. 26.10 Header: CSeq: 100 ACK Header: Content-Length : 0 -------------------------------------- --------------------------- SIP Headers -------------------------------------- ---------------------- ...

  • Cisco Systems 1.3.0 - page 127

    SIP IP Phone to SIP I P Phone: Call Return C-71 sip-req: INVITE sip:6715@192.168.26 .200:5060;user=phone SIP/2.0 [19 2.168.26.180:5060- >192.168.26.200:5060] Header: Via: SIP/2.0/U DP 192.168.26.180:5060;branch=1 Header: Via: SIP/2.0/U DP 192.168.26.10:5060 Header: From: <sip:671 1@192.168.26.10:5060> Header: To: <sip:6715@ 192.168.26.1 ...

  • Cisco Systems 1.3.0 - page 128

    C-72 SIP IP Phone to SI P IP Phone: Cal l Retu rn -------------------------------------- --------------------------- Header: v=0 Header: o=CiscoSy stemsSIP-IPPhone-UserAgent 8962 2 811 IN IP4 192.168.26.10 Header: s=SIP Call Header: c=IN IP4 192.1 68.26.10 Header: t=0 0 Header: m=audio 29850 RTP/AVP 0 101 Header: a=rtpmap:0 pcm u/8000 Header: a=rtp ...

  • Cisco Systems 1.3.0 - page 129

    SIP IP Phone to SIP I P Phone: Call Return C-73 Header: m=audio 29956 RTP/AVP 0 101 Header: a=rtpmap:0 pcm u/8000 Header: a=rtpmap:101 t elephone-event/8000 Header: a=fmtp:101 0-1 1 -------------------------------------- --------------------------- SIP Headers -------------------------------------- --------------------------- sip-res: SIP/2.0 200 O ...

  • Cisco Systems 1.3.0 - page 130

    C-74 SIP IP Phone to SI P IP Phone: Cal l Retu rn Header: Route: <sip:67 15@192.168.26.180:5060;maddr=192 .168.26.180>, <sip:6711@192.168.26.10:5060> Header: Content-Length : 0 -------------------------------------- --------------------------- SIP Headers -------------------------------------- --------------------------- sip-req: BYE si ...

  • Cisco Systems 1.3.0 - page 131

    User Agent to User Agent: Call W aiting C-75 User Agent to User Agent: Call W aiting Call Scenario Figur e C- 25 illu strates t he foll owing cal l scenari o: • User A cal ls User B • While Users A and B are in conversation, User C call s User A • User A is notified that another cal ler attempting to connec t Figure C-25. User Agent to User A ...

  • Cisco Systems 1.3.0 - page 132

    C-76 User Agent t o User Agen t: Call Wai ting Figure C-26. User Agent to User Agent : Call Wa iting — Diagr am 1 VOCAL User Agent UA Marshal 1. INVITE 2. 100 Redirect Server 3. INVITE 4. 302 5. ACK 6. INVITE 7. 302 8. ACK VOCAL User Agent 9. INVITE 10. 180 11. 180 12. 200 13. 200 14. ACK 15. ACK VOCAL User Agent ...

  • Cisco Systems 1.3.0 - page 133

    C-77 User Agent t o User Agen t: Call Wai ting Figure C-27. User Agent to User Agent : Call Wa iting — Diagr am 2 VOCAL User Agent UA Marshal Redirect Server VOCAL User Agent VOCAL User Agent 16. INVITE 17. 100 18. INVITE 19. 302 20. ACK 21. INVITE 22. 302 23. ACK 24. INVITE 25. 180 26. INVITE 27. 200 28. 200 29. 200 30. ACK 31. ACK ...

  • Cisco Systems 1.3.0 - page 134

    C-78 User Agent t o User Agen t: Call Wai ting Figure C-28. User Agent to User Agent : Call Wa iting — Diagr am 3 VOCAL User Agent UA Marshal Redirect Server VOCAL User Agent VOCAL User Agent 32. INVITE 33. 200 34. INVITE 35. 200 36. ACK 37. ACK 38. BYE 39. 200 40. BYE 41. BYE 42. 200 43. 200 ...

  • Cisco Systems 1.3.0 - page 135

    User Agent to User Agent: Call W aiting C-79 Call T r ace The foll owing call trac e shows a thir d par ty attempting t o connect to a phone that is engaged in conv ersation wit h another phone. ====================================== =========================== A calls B -------------------------------------- --------------------------- SIP Headers ...

  • Cisco Systems 1.3.0 - page 136

    C-80 User Agent t o User Agent: Call Wai ting Header: F -------------------------------------- --------------------------- SIP Headers -------------------------------------- --------------------------- sip-res: SIP/2.0 302 Moved Temporar ily [192.168.66.200:5060->192.16 8.66.180:5060] Header: Via: SIP/2.0/U DP 192.168.66.180:5060;branch=1 Header ...

  • Cisco Systems 1.3.0 - page 137

    User Agent to User Agent: Call W aiting C-81 -------------------------------------- --------------------------- sip-req: ACK sip:5220@192.168.66.20 0:5060;user=phone SIP/2.0 [192.1 68.66.180:5060- >192.168.66.200:5060] Header: Via: SIP/2.0/U DP 192.168.66.180:5060;branch=3 Header: From: UserAgen t<sip:5221@192.168.66.1:5060;use r=phone> He ...

  • Cisco Systems 1.3.0 - page 138

    C-82 User Agent t o User Agent: Call Wai ting Header: From: UserAgen t<sip:5221@192.168.66.1:5060;use r=phone> Header: To: 5220<sip:5 220@192.168.66.180:5060;user=pho ne> Header: Call-ID: 4732a 6465cfdffbdc0d38708c0728708@192. 168.66.1 Header: CSeq: 1 INVITE Header: Contact: <sip: 5220@192.168.66.2:5060> Header: Record-Route: < ...

  • Cisco Systems 1.3.0 - page 139

    User Agent to User Agent: Call W aiting C-83 Header: From: UserAgen t<sip:5221@192.168.66.1:5060;use r=phone> Header: To: 5220<sip:5 220@192.168.66.180:5060;user=pho ne> Header: Call-ID: 4732a 6465cfdffbdc0d38708c0728708@192. 168.66.1 Header: CSeq: 1 ACK Header: Content-Length : 0 -------------------------------------- ----------------- ...

  • Cisco Systems 1.3.0 - page 140

    C-84 User Agent t o User Agent: Call Wai ting Header: m=audio 60335 RTP/AVP 0 Header: a=rtpmap:0 PCM U/8000 Header: a=ptime:20 Header: * -------------------------------------- --------------------------- SIP Headers -------------------------------------- --------------------------- sip-res: SIP/2.0 302 Moved Temporar ily [192.168.66.200:5060->19 ...

  • Cisco Systems 1.3.0 - page 141

    User Agent to User Agent: Call W aiting C-85 Header: Content-Length : 0 -------------------------------------- --------------------------- SIP Headers -------------------------------------- --------------------------- sip-req: ACK sip:5220@192.168.66.20 0:5060;user=phone SIP/2.0 [192.1 68.66.180:5060- >192.168.66.200:5060] Header: Via: SIP/2.0/U ...

  • Cisco Systems 1.3.0 - page 142

    C-86 User Agent t o User Agent: Call Wai ting Header: Route: <sip:5220@192.168.66.180:5060;maddr=19 2.168.66.180>,<sip:5220@192.168. 66.180:5060;maddr=1 92.168.66.180>,<sip:5221@192.168.66.1: 5060> Header: Content-Type: application/sdp Header: Content-Length : 126 -------------------------------------- --------------------------- ...

  • Cisco Systems 1.3.0 - page 143

    User Agent to User Agent: Call W aiting C-87 sip-res: SIP/2.0 200 OK [192.168.66. 180:5060- >192.168.66.3:5060] Header: Via: SIP/2.0/U DP 192.168.66.3:5060 Header: From: UserAgen t<sip:5222@192.168.66.3:5060;use r=phone> Header: To: 5220<sip:5 220@192.168.66.180:5060;user=pho ne> Header: Call-ID: 52f78 a2b5cfdffbd60c98708a0688708@192 ...

  • Cisco Systems 1.3.0 - page 144

    C-88 User Agent t o User Agent: Call Wai ting SDP Headers -------------------------------------- --------------------------- Header: v=0 Header: o=- 1573383876 1573383876 IN IP4 192.168.66.2 Header: s=VOVIDA Sessi on Header: c=IN IP4 0.0.0 .0 Header: t=3177769031 0 Header: m=audio 3456 R TP/AVP 0 Header: -------------------------------------- ----- ...

  • Cisco Systems 1.3.0 - page 145

    User Agent to User Agent: Call W aiting C-89 Header: Content-Type: application/sdp Header: Content-Type: application/sdp Header: Content-Length : 168 Header: Content-Length : 168 -------------------------------------- --------------------------- SDP Headers -------------------------------------- --------------------------- Header: v=0 Header: o=- 1 ...

  • Cisco Systems 1.3.0 - page 146

    C-90 User Agent t o User Agent: Call Wai ting sip-req: BYE sip:5220@192.168.66.18 0:5060;maddr=192.168.66.180 SIP/ 2.0 [192.168.66.2:5060->192.168.66.180:506 0] Header: Via: SIP/2.0/U DP 192.168.66.2:5060 Header: From: 5220<sip :5220@192.168.66.180:5060;user=p hone> Header: To: UserAgent< sip:5221@192.168.66.1:5060;user= phone> Heade ...

  • Cisco Systems 1.3.0 - page 147

    SIP IP Phone to SIP IP Phone: Forward to V oice Mail C-91 SIP IP Phone to SIP IP Phon e: Forward to V oice Mail Call Scenario Figur e C- 29 illu strates t he foll owing cal l scenari o: • User A cal ls User B • User B does not answer the call • The call is for warded to the voi ce mail featu re ser ver Figure C-29 . SIP IP Phone to SIP IP Pho ...

  • Cisco Systems 1.3.0 - page 148

    C-92 SIP IP Phone to SIP IP Phone: Forward to V oi ce Mail Figure C-30 . SIP IP Phone to SIP IP Pho ne: Forward to V oice Mail — Di agram 1 SIP Phone UA Marshal 1. INVITE 2. 100 Redirect Server 3. INVITE 4. 302 5. ACK Feature Server: FNA 6. INVITE 7. 100 8. INVITE 9. 100 10. INVITE 11. 302 12. ACK SIP Phone 13. INVITE 14. 100 15. 180 ...

  • Cisco Systems 1.3.0 - page 149

    C-93 SIP IP Phone to SIP IP Phone: Forward to V oi ce Mail Figure C-31 . SIP IP Phone to SIP IP Pho ne: Forward to V oice Mail — Di agram 2 SIP Phone UA Marshal Redirect Server Feature Server: FNA SIP Phone 16. 180 17. 180 18. 180 19. CANCEL 20. 200 21. CANCEL 22. 200 23. 180 24. 180 25. 200 26. 200 27. ACK 28. ACK 29. BYE 30. BYE 31. 200 ...

  • Cisco Systems 1.3.0 - page 150

    C-94 SIP IP Phone to SIP IP Phone: Forward to V oi ce Mail Figure C-32 . SIP IP Phone to SIP IP Pho ne: Forward to V oice Mail — Di agram 3 SIP Phone UA Marshal Redirect Server Feature Server: FNA SIP Phone 32. 200 ...

  • Cisco Systems 1.3.0 - page 151

    SIP IP Phone to SIP IP Phone: Forward to V oice Mail C-95 Call T r ace The followi ng call trace shows a SIP IP phone attempting to cal l another on- network SI P IP phon e. The second phone i s unanswere d and the c all is re- initiate d with the V oice Mail serv er . -------------------------------------- --------------------------- SIP Headers - ...

  • Cisco Systems 1.3.0 - page 152

    C-96 SIP IP Phone to SIP IP Phone: For ward to V oice Mai l Header: t=0 0 Header: m=audio 23994 RTP/AVP 0 101 Header: a=rtpmap:0 pcm u/8000 Header: a=rtpmap:101 t elephone-event/8000 Header: a=fmtp:101 0-1 1 -------------------------------------- --------------------------- SIP Headers -------------------------------------- ------------------------ ...

  • Cisco Systems 1.3.0 - page 153

    SIP IP Phone to SIP IP Phone: Forward to V oice Mail C-97 SIP Headers -------------------------------------- --------------------------- sip-req: INVITE sip:5210@192.168.56 .180:5060 SIP/2.0 [192.168.56. 220:5074- >192.168.56.180:5060] Header: Via: SIP/2.0/U DP 192.168.56.220:5074;branch=10 2 Header: Via: SIP/2.0/U DP 192.168.56.180:5060;branch= ...

  • Cisco Systems 1.3.0 - page 154

    C-98 SIP IP Phone to SIP IP Phone: For ward to V oice Mai l -------------------------------------- --------------------------- Header: v=0 Header: o=CiscoSystems SIP-IPPhone-UserAgent 25678 2814 0 IN IP4 192.168.10.18 Header: s=SIP Call Header: c=IN IP4 192.1 68.10.18 Header: t=0 0 Header: m=audio 23994 RTP/AVP 0 101 Header: a=rtpmap:0 pcm u/8000 H ...

  • Cisco Systems 1.3.0 - page 155

    SIP IP Phone to SIP IP Phone: Forward to V oice Mail C-99 Header: a=rtpmap:0 pcm u/8000 Header: a=rtpmap:101 t elephone-event/8000 Header: a=fmtp:101 0-1 1 -------------------------------------- --------------------------- SIP Headers -------------------------------------- --------------------------- sip-res: SIP/2.0 100 Trying [192.16 8.10.10:5078 ...

  • Cisco Systems 1.3.0 - page 156

    C-100 SIP IP Phone to SIP IP Phone: For ward to V oice Mai l Header: Via: SIP/2.0/U DP 192.168.56.220:5074;branch=10 2 Header: From: <sip:521 8@192.168.10.18:5060> Header: To: <sip:5210@ 192.168.56.180:5060> Header: Call-ID: c2943 000-482e7-61caa-2e323931@192.168 .10.18 Header: CSeq: 100 CANC EL Header: Proxy-Authoriz ation: Basic Vovid ...

  • Cisco Systems 1.3.0 - page 157

    SIP IP Phone to SIP IP Phone: Forward to V oice Mail C-101 Header: Contact: <sip: 6500@192.168.56.220:5082> Header: Record-Route: <sip:192.168.56.220:5060;maddr=192.168 .56.220>,<sip:5210@192.168.56.22 0:5074;maddr=192.16 8.56.220>,<sip:5210@192.168.56.180:506 0;maddr=192.168.56.180> Header: Content-Type: application/sdp Hea ...

  • Cisco Systems 1.3.0 - page 158

    C-102 SIP IP Phone to SIP IP Phone: For ward to V oice Mai l Header: Route: <sip:192.168.56.220:5060;maddr=192.168 .56.220>,<sip:6500@192.168.56.22 0:5082> Header: Proxy-Authoriz ation: Basic VovidaClassXSwitch Header: Content-Length : 0 -------------------------------------- --------------------------- SIP Headers --------------------- ...

  • Cisco Systems 1.3.0 - page 159

    User Agent to User Agent: Consulted T r ansfer C-103 User Agent to User Agent: Consulted T ransfer Call Scenario Figur e C- 33 illu strates t he foll owing cal l scenari o: • User A cal ls User B. • User B puts User B on hold and notif ies User C about User A ’ s c all. • User B transfer s the cal l to User C. Figure C-33. User Agent to Use ...

  • Cisco Systems 1.3.0 - page 160

    C-104 User Agent t o User Agent: Consulted Transf er Figure C-34. User Agent to User Agent : Consulted T r ansfer — Diagram 1 VOCAL User Agent UA Marshal 1. INVITE 2. 100 VOCAL User Agent 3. INVITE 4. 200 5. 200 6. ACK 7. ACK 8. INVITE 9. 100 10. INVITE 11. 200 12. 200 13. ACK 14. ACK 15. INVITE VOCAL User Agent ...

  • Cisco Systems 1.3.0 - page 161

    C-105 User Agent t o User Agent: Consulted Transf er Figure C-35. User Agent to User Agent : Consulted T r ansfer — Diagram 2 VOCAL User Agent UA Marshal VOCAL User Agent VOCAL User Agent 16. 100 17. INVITE 18. 180 19. 180 20. 200 21. 200 22. ACK 23. ACK 24. INVITE 25. 100 26. INVITE 27. 200 28. 200 29. ACK 30. ACK 31. TRANSFER ...

  • Cisco Systems 1.3.0 - page 162

    C-106 User Agent t o User Agent: Consulted Transf er Figure C-36. User Agent to User Agent : Consulted T r ansfer — Diagram 3 VOCAL User Agent UA Marshal VOCAL User Agent VOCAL User Agent 32. 100 33. TRANSFER 34. 100 35. INVITE 36. 100 37. INVITE 38. 200 39. 200 40. 200 41. 200 42. ACK 43. ACK 44. BYE 45. BYE 46. BYE 47. 200 ...

  • Cisco Systems 1.3.0 - page 163

    C-107 User Agent t o User Agent: Consulted Transf er Figure C-37. User Agent to User Agent : Consulted T r ansfer — Diagram 4 VOCAL User Agent UA Marshal VOCAL User Agent VOCAL User Agent 48. BYE 49. 200 50. 200 51. 200 52. BYE 53. BYE 54. 200 55. 200 ...

  • Cisco Systems 1.3.0 - page 164

    C-108 User Agent t o User Agent: Consulte d T ransfer Call T r ace The followi ng call trace shows a consulted cal l transfer between two SIP IP phones. -------------------------------------- --------------------------- SIP Headers -------------------------------------- --------------------------- sip-req: INVITE sip:5221@192.168.26 .180:5060;user= ...

  • Cisco Systems 1.3.0 - page 165

    User Agent to User Agent: Consulted T r ansfer C-109 Header: -------------------------------------- --------------------------- SIP Headers -------------------------------------- --------------------------- sip-res: SIP/2.0 200 OK [192.168.66 .2:5060->192.168.26.180:5060] Header: Via: SIP/2.0/U DP 192.168.26.180:5060;branch=4 Header: Via: SIP/2. ...

  • Cisco Systems 1.3.0 - page 166

    C-1 10 User Agent t o User Agent: Consulte d T ransfer SIP Headers -------------------------------------- --------------------------- sip-req: ACK sip:5221@192.168.66.2: 5060 SIP/2.0 [192.168.26. 180:5060- >192.168.66.2:5060] Header: Via: SIP/2.0/U DP 192.168.26.180:5060;branch=4 Header: Via: SIP/2.0/U DP 192.168.26.180:5060;branch=2 Header: Via ...

  • Cisco Systems 1.3.0 - page 167

    User Agent to User Agent: Consulted T r ansfer C-1 1 1 Header: c=IN IP4 0.0.0 .0 Header: t=3174939344 0 Header: m=audio 23456 RTP/AVP 0 Header: a=rtpmap:0 PCM U/8000 Header: a=ptime:20 Header: j Ë -------------------------------------- --------------------------- SIP Headers -------------------------------------- --------------------------- sip-re ...

  • Cisco Systems 1.3.0 - page 168

    C-1 12 User Agent t o User Agent: Consulte d T ransfer -------------------------------------- --------------------------- sip-req: ACK sip:5221@192.168.66.2: 5060 SIP/2.0 [192.168.26. 180:5060- >192.168.66.2:5060] Header: Via: SIP/2.0/U DP 192.168.26.180:5060;branch=4 Header: Via: SIP/2.0/U DP 192.168.26.180:5060;branch=2 Header: Via: SIP/2.0/U ...

  • Cisco Systems 1.3.0 - page 169

    User Agent to User Agent: Consulted T r ansfer C-1 13 Header: o=- 1113249245 1113249245 IN IP4 192.168.66.1 Header: s=VOVIDA Sessi on Header: c=IN IP4 192.1 68.66.1 Header: t=3174939385 0 Header: m=audio 23456 RTP/AVP 0 Header: a=rtpmap:0 PCM U/8000 Header: a=ptime:20 Header: om -------------------------------------- --------------------------- SIP ...

  • Cisco Systems 1.3.0 - page 170

    C-1 14 User Agent t o User Agent: Consulte d T ransfer Header: Record-Route: <sip:5222@192.168.26.180:5060;maddr=19 2.168.26.180>,<sip:5222@192.168. 26.180:5060;maddr=1 92.168.26.180> Header: Content-Type: application/sdp Header: Content-Length : 168 -------------------------------------- --------------------------- SDP Headers -------- ...

  • Cisco Systems 1.3.0 - page 171

    User Agent to User Agent: Consulted T r ansfer C-1 15 SIP Headers -------------------------------------- --------------------------- sip-res: SIP/2.0 100 Trying [192.16 8.26.180:5060->192.168.66.1:5060 ] Header: Via: SIP/2.0/U DP 192.168.66.1:5060 Header: From: UserAgen t<sip:5220@192.168.66.1:5060;use r=phone> Header: To: 5222<sip:5 22 ...

  • Cisco Systems 1.3.0 - page 172

    C-1 16 User Agent t o User Agent: Consulte d T ransfer Header: Contact: <sip: 5222@192.168.66.3:5060;user=phon e> Header: Content-Type: application/sdp Header: Content-Length : 166 -------------------------------------- --------------------------- SDP Headers -------------------------------------- --------------------------- Header: v=0 Heade ...

  • Cisco Systems 1.3.0 - page 173

    User Agent to User Agent: Consulted T r ansfer C-1 17 sip-req: TRANSFER sip:5221@192.168. 66.2:5060 SIP/2.0 [192.168.26. 180:5060- >192.168.66.2:5060] Header: Via: SIP/2.0/U DP 192.168.26.180:5060;branch=4 Header: Via: SIP/2.0/U DP 192.168.26.180:5060;branch=2 Header: Via: SIP/2.0/U DP 192.168.66.1:5060 Header: From: UserAgen t<sip:5220@192.1 ...

  • Cisco Systems 1.3.0 - page 174

    C-1 18 User Agent t o User Agent: Consulte d T ransfer Header: CSeq: 1 INVITE Header: Subject: Vovid aINVITE Header: Record-Route: <sip:5222@192.168.26.180:5060;maddr=19 2.168.26.180>,<sip:5222@192.168. 26.180:5060;maddr=1 92.168.26.180> Header: Contact: <sip: 5221@192.168.66.2:5060;user=phon e> Header: Content-Type: application/s ...

  • Cisco Systems 1.3.0 - page 175

    User Agent to User Agent: Consulted T r ansfer C-1 19 Header: s=VOVIDA Sessi on Header: c=IN IP4 192.1 68.66.3 Header: t=3174939395 0 Header: m=audio 23466 RTP/AVP 0 Header: a=rtpmap:0 PCM U/8000 Header: a=ptime:20 Header: bc -------------------------------------- --------------------------- SIP Headers -------------------------------------- ------ ...

  • Cisco Systems 1.3.0 - page 176

    C-120 User Agent t o User Agent: Consulte d T ransfer -------------------------------------- --------------------------- sip-req: BYE sip:5222@192.168.26.18 0:5060;maddr=192.168.26.180 SIP/ 2.0 [192.168.66.1:5060->192.168.26.180:506 0] Header: Via: SIP/2.0/U DP 192.168.66.1:5060 Header: From: UserAgen t<sip:5220@192.168.66.1:5060;use r=phone& ...

  • Cisco Systems 1.3.0 - page 177

    User Agent to User Agent: Consulted T r ansfer C-121 Header: Content-Length : 0 -------------------------------------- --------------------------- SIP Headers -------------------------------------- --------------------------- sip-res: SIP/2.0 200 OK [192.168.26 .180:5060->192.168.66.1:5060] Header: Via: SIP/2.0/U DP 192.168.66.1:5060 Header: Fro ...

  • Cisco Systems 1.3.0 - page 178

    C-122 User Agent t o User Agent: Blind T ransfer User Agent to User Agent: Blind T ransfer Call Scenario Figur e C- 38 illu strates a call sc enario in which: • User A cal ls User B. • User B transfer s the cal l to User C without consulting User C. Figure C-38. User Agent to User Agent : Blind T ran sfer Call Flow Diagram Fi gur es C-39, C-40, ...

  • Cisco Systems 1.3.0 - page 179

    C-123 User Agent t o User Agent: Blind Transf er Figure C-39. User Agent to User Agent : Blind T ran sfer — Diagram 1 VOCAL User Agent UA Marshal 1. INVITE 2. 100 VOCAL User Agent 3. INVITE 4. 180 5. 180 6. 200 7. 200 8. ACK 9. ACK 10. INVITE 11. 100 12. INVITE 13. 200 14. 200 15. ACK VOCAL User Agent ...

  • Cisco Systems 1.3.0 - page 180

    C-124 User Agent t o User Agent: Blind Transf er Figure C-40. User Agent to User Agent : Blind T ran sfer — Diagram 2 VOCAL User Agent UA Marshal VOCAL User Agent VOCAL User Agent 16. ACK 17. INVITE 18. 100 19. INVITE 20. 180 21. 180 22. INVITE 23. 100 24. INVITE 25. 180 26. 180 27. TRANSFER 28. 100 29. TRANSFER 30. 100 31. INVITE ...

  • Cisco Systems 1.3.0 - page 181

    C-125 User Agent t o User Agent: Blind Transf er Figure C-41. User Agent to User Agent : Blind T ran sfer — Diagram 3 VOCAL User Agent UA Marshal VOCAL User Agent VOCAL User Agent 32. 100 33. INVITE 34. 180 35. 180 36. 200 37. 200 38. BYE 39. CANCEL 40. 200 41. BYE 42. 200 43. CANCEL 44. 200 45. 200 46. 200 47. 200 ...

  • Cisco Systems 1.3.0 - page 182

    C-126 User Agent t o User Agent: Blind Transf er Figure C-42. User Agent to User Agent : Blind T ran sfer — Diagram 4 VOCAL User Agent UA Marshal VOCAL User Agent VOCAL User Agent 48. ACK 49. ACK 50. BYE 51. BYE 52. 200 53. 200 ...

  • Cisco Systems 1.3.0 - page 183

    User Agent t o User Agent: Blind Transf er C-127 Call T r ace The followi ng call trace shows an unconsul t ed call transf er . -------------------------------------- --------------------------- SIP Headers -------------------------------------- --------------------------- sip-req: INVITE sip:5221@192.168.26 .180:5060;user=phone SIP/2.0 [19 2.168.6 ...

  • Cisco Systems 1.3.0 - page 184

    C-128 User Agent t o User Agent: Blind T ransfer -------------------------------------- --------------------------- SIP Headers -------------------------------------- --------------------------- sip-res: SIP/2.0 180 Ringing [192.1 68.66.2:5060->192.168.26.180:506 0] Header: Via: SIP/2.0/U DP 192.168.26.180:5060;branch=4 Header: Via: SIP/2.0/U DP ...

  • Cisco Systems 1.3.0 - page 185

    User Agent t o User Agent: Blind Transf er C-129 Header: s=VOVIDA Sessi on Header: c=IN IP4 192.1 68.66.2 Header: t=3174939460 0 Header: m=audio 23466 RTP/AVP 0 Header: a=rtpmap:0 PCM U/8000 Header: a=ptime:20 Header: }! -------------------------------------- --------------------------- SIP Headers -------------------------------------- ----------- ...

  • Cisco Systems 1.3.0 - page 186

    C-130 User Agent t o User Agent: Blind T ransfer -------------------------------------- --------------------------- SIP Headers -------------------------------------- --------------------------- sip-req: INVITE sip:5221@192.168.66 .2:5060 SIP/2.0 [192.168.26. 180:5060- >192.168.66.2:5060] Header: Via: SIP/2.0/U DP 192.168.26.180:5060;branch=4 He ...

  • Cisco Systems 1.3.0 - page 187

    User Agent t o User Agent: Blind Transf er C-131 Header: c=IN IP4 192.1 68.66.2 Header: t=3174939460 0 Header: m=audio 23456 RTP/AVP 0 Header: a=rtpmap:0 PCM U/8000 Header: a=ptime:20 Header: ‚ -------------------------------------- --------------------------- SIP Headers -------------------------------------- --------------------------- sip-req: ...

  • Cisco Systems 1.3.0 - page 188

    C-132 User Agent t o User Agent: Blind T ransfer -------------------------------------- --------------------------- sip-req: INVITE sip:5222@192.168.66 .3:5060 SIP/2.0 [192.168.26. 180:5060- >192.168.66.3:5060] Header: Via: SIP/2.0/U DP 192.168.26.180:5060;branch=4 Header: Via: SIP/2.0/U DP 192.168.26.180:5060;branch=2 Header: Via: SIP/2.0/U DP ...

  • Cisco Systems 1.3.0 - page 189

    User Agent t o User Agent: Blind Transf er C-133 Header: s=VOVIDA Sessi on Header: c=IN IP4 0.0.0 .0 Header: t=3174939482 0 Header: m=audio 23456 RTP/AVP 0 Header: a=rtpmap:0 PCM U/8000 Header: a=ptime:20 Header: ÄÌ -------------------------------------- --------------------------- SIP Headers -------------------------------------- -------------- ...

  • Cisco Systems 1.3.0 - page 190

    C-134 User Agent t o User Agent: Blind T ransfer -------------------------------------- --------------------------- SIP Headers -------------------------------------- --------------------------- sip-req: TRANSFER sip:5221@192.168. 26.180:5060;maddr=192.168.26.180 SIP/2.0 [192.168.66.1:5060->192.168.26.180:506 0] Header: Via: SIP/2.0/U DP 192.168 ...

  • Cisco Systems 1.3.0 - page 191

    User Agent t o User Agent: Blind Transf er C-135 Header: o=- 1986829226 1986829226 IN IP4 192.168.66.2 Header: s=VOVIDA Sessi on Header: c=IN IP4 192.1 68.66.2 Header: t=3174939488 0 Header: m=audio 23456 RTP/AVP 0 Header: a=rtpmap:0 PCM U/8000 Header: a=ptime:20 -------------------------------------- --------------------------- SIP Headers ------- ...

  • Cisco Systems 1.3.0 - page 192

    C-136 User Agent t o User Agent: Blind T ransfer -------------------------------------- --------------------------- SIP Headers -------------------------------------- --------------------------- sip-res: SIP/2.0 200 OK [192.168.66 .2:5060->192.168.26.180:5060] Header: Via: SIP/2.0/U DP 192.168.26.180:5060;branch=4 Header: Via: SIP/2.0/U DP 192.1 ...

  • Cisco Systems 1.3.0 - page 193

    User Agent t o User Agent: Blind Transf er C-137 SIP Headers -------------------------------------- --------------------------- sip-res: SIP/2.0 200 OK [192.168.66 .2:5060->192.168.26.180:5060] Header: Via: SIP/2.0/U DP 192.168.26.180:5060;branch=4 Header: Via: SIP/2.0/U DP 192.168.26.180:5060;branch=2 Header: Via: SIP/2.0/U DP 192.168.66.1:5060 ...

  • Cisco Systems 1.3.0 - page 194

    C-138 User Agent t o User Agent: Blind T ransfer Header: ÷Ï -------------------------------------- --------------------------- SIP Headers -------------------------------------- --------------------------- sip-res: SIP/2.0 200 OK [192.168.26 .180:5060->192.168.66.2:5060] Header: Via: SIP/2.0/U DP 192.168.66.2:5060 Header: From: UserAgen t<s ...

  • Cisco Systems 1.3.0 - page 195

    User Agent t o User Agent: Blind Transf er C-139 sip-req: BYE sip:5222@192.168.66.3: 5060 SIP/2.0 [192.168.26. 180:5060- >192.168.66.3:5060] Header: Via: SIP/2.0/U DP 192.168.26.180:5060;branch=4 Header: Via: SIP/2.0/U DP 192.168.26.180:5060;branch=2 Header: Via: SIP/2.0/U DP 192.168.66.2:5060 Header: From: UserAgen t<sip:5221@192.168.66.2:50 ...

  • Cisco Systems 1.3.0 - page 196

    C-140 JT API JT API Call Scenario Figur e C- 43 illu strates t he foll owing cal l scenari o: • A user use s a JT API User Agent on a PC t o remotely instruct SIP Pho ne A to call SIP Phone B. Figure C-43. JT API Call Flow Diagram Fi gur es C-44, C-45, C-46 and C-47 show thir d p arty call cont rol through a JT API se rver . PC with JT API UA Con ...

  • Cisco Systems 1.3.0 - page 197

    C-141 JT API Figure C-44. Call Flow Diagram: JT API — Diagr am 1 JTAPI User Agent Redirect Server 1. INVITE 2. 302 3. ACK UA Marshal 4. INVITE 5. 100 6. INVITE 7. 302 8. ACK VOCAL User Agent 9. INVITE 10. 180 11. 180 12. 200 13. 200 14. ACK 15. INVITE SIP Phone ...

  • Cisco Systems 1.3.0 - page 198

    C-142 JT API Figure C-45. Call Flow Diagram: JT API — Flow Diagr am 2 JTAPI User Agent Redirect Server UA Marshal VOCAL User Agent SIP Phone 16. 302 17. 200 18. 200 19. ACK 20. ACK 21. 100 22. 100 23. INVITE 24. 302 25. INVITE 26. 302 27. ACK 28. INVITE 29. 100 30. 302 31. ACK ...

  • Cisco Systems 1.3.0 - page 199

    C-143 JT API Figure C-46. Call Flow Diagram: JT API — Flow Diagr am 3 JTAPI User Agent Redirect Server UA Marshal VOCAL User Agent SIP Phone 32. 100 33. 180 34. 180 35. 180 36. 180 37. 200 38. 200 39. BYE 40. BYE 41. 200 42. 200 43. 200 44. 200 45. 200 46. 200 47. ACK ...

  • Cisco Systems 1.3.0 - page 200

    C-144 JT API Figure C-47. Call Flow Diagram: JT API — Flow Diagr am 4 JTAPI User Agent Redirect Server UA Marshal VOCAL User Agent SIP Phone 48. ACK 49. ACK 50. 200 51. ACK 52. ACK 53. BYE 54. BYE 55. BYE 56. BYE 57. 200 58. 200 59. 200 60. 200 ...

  • Cisco Systems 1.3.0 - page 201

    JT API C-145 Call T r ace The followi ng call trace shows thir d part y call control through a JT API server . -------------------------------------- --------------------------- SIP Headers -------------------------------------- --------------------------- sip-req: INVITE sip:6710@192.168.26 .200:5060;user=phone SIP/2.0 [19 2.168.5.11:25060- >19 ...

  • Cisco Systems 1.3.0 - page 202

    C-146 JT API Header: Content-Length : 0 -------------------------------------- --------------------------- SIP Headers -------------------------------------- --------------------------- sip-req: INVITE sip:6710@192.168.26 .200:5060;user=phone SIP/2.0 [19 2.168.26.180:5060- >192.168.26.200:5060] Header: Via: SIP/2.0/U DP 192.168.26.180:5060;branc ...

  • Cisco Systems 1.3.0 - page 203

    JT API C-147 Header: Via: SIP/2.0/U DP 192.168.5.11:25060;branch=301 Header: From: <sip:-@1 92.168.5.11:25060> Header: To: 6710<sip:6 710@192.168.26.200:5060;user=pho ne> Header: Call-ID: 10878 93762978930@192.168.5.11 Header: CSeq: 1 INVITE Header: Content-Length : 0 -------------------------------------- --------------------------- SI ...

  • Cisco Systems 1.3.0 - page 204

    C-148 JT API SDP Headers -------------------------------------- --------------------------- Header: v=0 Header: o=- 1735072859 1735072859 IN IP4 192.168.22.36 Header: s=VOVIDA Sessi on Header: c=IN IP4 192.1 68.22.36 Header: t=3174942917 0 Header: m=audio 23456 RTP/AVP 0 Header: a=rtpmap:0 PCM U/8000 Header: a=ptime:20 ----------------------------- ...

  • Cisco Systems 1.3.0 - page 205

    JT API C-149 Header: m=audio 23456 RTP/AVP 0 Header: a=rtpmap:0 PCM U/8000 Header: a=ptime:20 -------------------------------------- --------------------------- SIP Headers -------------------------------------- --------------------------- sip-res: SIP/2.0 200 OK [192.168.26 .180:5060->192.168.5.11:25060] Header: Via: SIP/2.0/U DP 192.168.5.11:2 ...

  • Cisco Systems 1.3.0 - page 206

    C-150 JT API Header: Call-ID: 10878 93762978930@192.168.5.11 Header: CSeq: 2 TRANSF ER Header: Content-Length : 0 -------------------------------------- --------------------------- SIP Headers -------------------------------------- --------------------------- sip-req: INVITE sip:6711@192.168.26 .180:5060;user=phone SIP/2.0 [19 2.168.22.36:5060- > ...

  • Cisco Systems 1.3.0 - page 207

    JT API C-151 Header: Via: SIP/2.0/U DP 192.168.5.11:15060;branch=202 Header: From: UserAgen t<sip:6710@192.168.22.36:5060> Header: To: 6711<sip:6 711@192.168.26.200:5060;user=pho ne> Header: Call-ID: 45889 8268105186@192.168.5.11 Header: CSeq: 1 INVITE Header: Contact: <sip: 6711@192.168.26.180:5060> Header: Content-Length : 0 --- ...

  • Cisco Systems 1.3.0 - page 208

    C-152 JT API sip-req: ACK sip:6711@192.168.26.20 0:5060;user=phone SIP/2.0 [192.1 68.26.180:5060- >192.168.26.200:5060] Header: Via: SIP/2.0/U DP 192.168.26.180:5060;branch=3 Header: From: UserAgen t<sip:6710@192.168.22.36:5060> Header: To: 6711<sip:6 711@192.168.26.200:5060;user=pho ne> Header: Call-ID: 45889 8268105186@192.168.5.11 ...

  • Cisco Systems 1.3.0 - page 209

    JT API C-153 sip-res: SIP/2.0 200 OK [192.168.22 .36:5060->192.168.26.180:5060] Header: Via: SIP/2.0/U DP 192.168.26.180:5060;branch=4 Header: Via: SIP/2.0/U DP 192.168.5.11:25060 Header: From: <sip:-@1 92.168.5.11:25060> Header: To: 6710<sip:6 710@192.168.26.200:5060;user=pho ne> Header: Call-ID: 10878 93762978930@192.168.5.11 Heade ...

  • Cisco Systems 1.3.0 - page 210

    C-154 JT API Header: From: UserAgen t<sip:6710@192.168.22.36:5060> Header: To: 6711<sip:6711@192.168.26.200:5060;user =phone>;tag=c29430003e2620-0 Header: Call-ID: 45889 8268105186@192.168.5.11 Header: Server: Cisco IP Phone/ Rev. 1/ SIP enabled Header: Contact: sip:6 711@192.168.26.10:5060 Header: Record-Route: <sip:6711@192.168.26. ...

  • Cisco Systems 1.3.0 - page 211

    JT API C-155 Header: o=CiscoSystems SIP-IPPhone-UserAgent 26487 2824 7 IN IP4 192.168.26.10 Header: s=SIP Call Header: c=IN IP4 192.1 68.26.10 Header: t=0 0 Header: m=audio 23206 RTP/AVP 0 101 Header: a=rtpmap:0 pcm u/8000 Header: a=rtpmap:101 t elephone-event/8000 Header: a=fmtp:101 0-1 1 -------------------------------------- -------------------- ...

  • Cisco Systems 1.3.0 - page 212

    C-156 JT API Header: CSeq: 1 ACK Header: Route: <sip:67 11@192.168.26.10:5060> Header: Proxy-Authoriz ation: Basic vovidaClassXswitch Header: Content-Length : 0 -------------------------------------- --------------------------- SIP Headers -------------------------------------- --------------------------- sip-res: SIP/2.0 200 OK [192.168.26 . ...

  • Cisco Systems 1.3.0 - page 213

    JT API C-157 Header: CSeq: 2 BYE Header: Route: <sip:js @192.168.5.11:15060> Header: Content-Length : 0 -------------------------------------- --------------------------- SIP Headers -------------------------------------- --------------------------- sip-req: BYE sip:js@192.168.5.11:15 060 SIP/2.0 [192.168.26. 180:5060- >192.168.5.11:15060] ...

  • Cisco Systems 1.3.0 - page 214

    C-158 JT API Header: From: 6711<sip:6711@192.168.26.200:5060;user =phone>;tag=c29430003e2620-0 Header: To: UserAgent< sip:6710@192.168.22.36:5060> Header: Call-ID: 45889 8268105186@192.168.5.11 Header: CSeq: 2 BYE Header: Contact: <sip: js@192.168.5.11:15060> Header: Content-Length : 0 -------------------------------------- ------ ...

  • Cisco Systems 1.3.0 - page 215

    Ad Hoc Conference Call Betw een User Agents C-159 Ad Hoc Conference Call Between Us er Agent s Call Scenario Figur e C- 48 illu strates t he foll owing cal l scenari o: • User A cal ls User B • User A brings User C into the con vers ation via ad hoc confere ncing. Figure C-48. User Agent to User Agent to User Agent: Ad Hoc Conference Cal l: Dis ...

  • Cisco Systems 1.3.0 - page 216

    C-160 Ad Hoc Conference Call Between User Agents Figure C-49. User Agent to User Agent to User Agent: Ad Hoc Conference Call: Disconnect Last Party — Diagram 1 VOCAL User Agent UA Marshal 1. INVITE 2. 100 Redirect Server 3. INVITE 4. 302 5. ACK 6. INVITE 7. 302 8. ACK VOCAL User Agent 9. INVITE 10. 180 11. 180 12. 200 13. 200 14. ACK 15. ACK VOCA ...

  • Cisco Systems 1.3.0 - page 217

    C-161 Ad Hoc Conference Call Between User Agents Figure C-50. User Agent to User Agent to User Agent: Ad Hoc Conference Call: Disconnect Last Party — Diagram 2 VOCAL User Agent UA Marshal Redirect Server VOCAL User Agent VOCAL User Agent 16. INVITE 17. 100 18. INVITE 19. 200 20. 200 21. ACK 22. ACK 23. INVITE 24. 100 25. INVITE 26. 302 27. ACK 28 ...

  • Cisco Systems 1.3.0 - page 218

    C-162 Ad Hoc Conference Call Between User Agents Figure C-51. User Agent to User Agent to User Agent: Ad Hoc Conference Call: Disconnect Last Party — Diagram 3 VOCAL User Agent UA Marshal Redirect Server VOCAL User Agent VOCAL User Agent 32. 180 33. 180 34. 200 35. 200 36. ACK 37. ACK 38. INVITE 39. 100 40. INVITE 41. 200 42. 200 43. ACK 44. ACK ...

  • Cisco Systems 1.3.0 - page 219

    C-163 Ad Hoc Conference Call Between User Agents Figure C-52. User Agent to User Agent to User Agent: Ad Hoc Conference Call: Disconnect Last Party — Diagram 4 VOCAL User Agent UA Marshal Redirect Server VOCAL User Agent VOCAL User Agent 48. 100 49. INVITE 50. 100 51. INVITE 52. 302 53. ACK 54. TRANSFER 55. INVITE 56. 100 57. 200 58. 200 59. 200 ...

  • Cisco Systems 1.3.0 - page 220

    C-164 Ad Hoc Conference Call Between User Agents Figure C-53. User Agent to User Agent to User Agent: Ad Hoc Conference Call: Disconnect Last Party — Diagram 5 VOCAL User Agent UA Marshal Redirect Server VOCAL User Agent VOCAL User Agent 64. 200 65. TRANSFER 66. INVITE 67. 100 68. 200 69. 200 70. 200 71. ACK 72. BYE 73. ACK 74. BYE ...

  • Cisco Systems 1.3.0 - page 221

    Ad Hoc Conference Call Betw een User Agents C-165 Call T r ace The followi ng call trace shows an ad hoc conference cal l bet ween thr ee users. -------------------------------------- --------------------------- SIP Headers -------------------------------------- --------------------------- sip-req: INVITE sip:5203@192.168.46 .180:5060;user=phone SI ...

  • Cisco Systems 1.3.0 - page 222

    C-166 Ad Hoc Conference Call Between User Agents sip-res: SIP/2.0 302 Moved Temporar ily [192.168.46. 200:5060- >192.168.46.180:5060] Header: Via: SIP/2.0/U DP 192.168.46.180:5060;branch=1 Header: Via: SIP/2.0/U DP 192.168.46.1:5060 Header: From: seymour< sip:5201@192.168.46.1:5060;user= phone> Header: To: 5203<sip:5 203@192.168.46.180: ...

  • Cisco Systems 1.3.0 - page 223

    Ad Hoc Conference Call Betw een User Agents C-167 Header: From: seymour< sip:5201@192.168.46.1:5060;user= phone> Header: To: 5203<sip:5 203@192.168.46.180:5060;user=pho ne> Header: Call-ID: 64133 833318102@192.168.46.1 Header: CSeq: 1 ACK Header: Content-Length : 0 -------------------------------------- --------------------------- SIP H ...

  • Cisco Systems 1.3.0 - page 224

    C-168 Ad Hoc Conference Call Between User Agents Header: Record-Route: <sip:5203@192.168.46.180:5060;maddr=19 2.168.46.180>,<sip:5203@192.168. 46.180:5060;maddr=1 92.168.46.180> Header: Content-Type: application/sdp Header: Content-Length : 168 -------------------------------------- --------------------------- SDP Headers -------------- ...

  • Cisco Systems 1.3.0 - page 225

    Ad Hoc Conference Call Betw een User Agents C-169 ====================================== =========================== First call establi shed -------------------------------------- --------------------------- SIP Headers -------------------------------------- --------------------------- sip-req: INVITE sip:5203@192.168.46 .180:5060;maddr=192.168.46. ...

  • Cisco Systems 1.3.0 - page 226

    C-170 Ad Hoc Conference Call Between User Agents Header: Via: SIP/2.0/U DP 192.168.46.180:5060;branch=4 Header: Via: SIP/2.0/U DP 192.168.46.180:5060;branch=2 Header: Via: SIP/2.0/U DP 192.168.46.1:5060 Header: From: seymour< sip:5201@192.168.46.1:5060;user= phone> Header: To: 5203<sip:5 203@192.168.46.180:5060;user=pho ne> Header: Call ...

  • Cisco Systems 1.3.0 - page 227

    Ad Hoc Conference Call Betw een User Agents C-171 -------------------------------------- --------------------------- SIP Headers -------------------------------------- --------------------------- sip-req: INVITE sip:5202@192.168.46 .180:5060;user=phone SIP/2.0 [19 2.168.46.1:5060- >192.168.46.180:5060] Header: Via: SIP/2.0/U DP 192.168.46.1:5060 ...

  • Cisco Systems 1.3.0 - page 228

    C-172 Ad Hoc Conference Call Between User Agents Header: To: 5202<sip:5 202@192.168.46.180:5060;user=pho ne> Header: Call-ID: 64133 833318102@192.168.46.1 Header: CSeq: 3 INVITE Header: Contact: <sip: 5202@192.168.46.180:5060> Header: Content-Length : 0 -------------------------------------- --------------------------- SIP Headers ----- ...

  • Cisco Systems 1.3.0 - page 229

    Ad Hoc Conference Call Betw een User Agents C-173 -------------------------------------- --------------------------- SIP Headers -------------------------------------- --------------------------- sip-req: INVITE sip:5202@192.168.46 .2:5060 SIP/2.0 [192.168.46. 180:5060- >192.168.46.2:5060] Header: Via: SIP/2.0/U DP 192.168.46.180:5060;branch=4 H ...

  • Cisco Systems 1.3.0 - page 230

    C-174 Ad Hoc Conference Call Between User Agents SDP Headers -------------------------------------- --------------------------- Header: v=0 Header: o=- 979501686 979501686 IN IP4 192.168.46.2 Header: s=VOVIDA Sessi on Header: c=IN IP4 192.1 68.46.2 Header: t=3177798665 0 Header: m=audio 23466 RTP/AVP 0 Header: a=rtpmap:0 PCM U/8000 Header: a=ptime: ...

  • Cisco Systems 1.3.0 - page 231

    Ad Hoc Conference Call Betw een User Agents C-175 sip-req: INVITE sip:5202@192.168.46 .180:5060;maddr=192.168.46.180 S IP/2.0 [192.168.46.1:5060->192.168.46.180:506 0] Header: Via: SIP/2.0/U DP 192.168.46.1:5060 Header: From: seymour< sip:5201@192.168.46.1:5060;user= phone> Header: To: 5202<sip:5 202@192.168.46.180:5060;user=pho ne> ...

  • Cisco Systems 1.3.0 - page 232

    C-176 Ad Hoc Conference Call Between User Agents Header: Content-Length : 168 -------------------------------------- --------------------------- SDP Headers -------------------------------------- --------------------------- Header: v=0 Header: o=- 1554681096 1554681096 IN IP4 192.168.46.2 Header: s=VOVIDA Sessi on Header: c=IN IP4 192.1 68.46.2 Hea ...

  • Cisco Systems 1.3.0 - page 233

    Ad Hoc Conference Call Betw een User Agents C-177 Header: Via: SIP/2.0/U DP 192.168.46.1:5060 Header: From: seymour< sip:5201@192.168.46.1:5060;user= phone> Header: To: 5203<sip:5 203@192.168.46.180:5060;user=pho ne> Header: Transfer-To: < sip:818883831000@192.168.46.180: 5060> Header: Call-ID: 64133 833318102@192.168.46.1 Header: ...

  • Cisco Systems 1.3.0 - page 234

    C-178 Ad Hoc Conference Call Between User Agents Header: t=3177798665 0 Header: m=audio 23456 RTP/AVP 0 Header: a=rtpmap:0 PCM U/8000 Header: a=ptime:20 -------------------------------------- --------------------------- SIP Headers -------------------------------------- --------------------------- sip-res: SIP/2.0 100 Trying [192.16 8.46.180:5060-& ...

  • Cisco Systems 1.3.0 - page 235

    Ad Hoc Conference Call Betw een User Agents C-179 -------------------------------------- --------------------------- SIP Headers -------------------------------------- --------------------------- sip-req: TRANSFER sip:5203@192.168. 46.3:5060 SIP/2.0 [192.168.46. 180:5060- >192.168.46.3:5060] Header: Via: SIP/2.0/U DP 192.168.46.180:5060;branch=4 ...

  • Cisco Systems 1.3.0 - page 236

    C-180 Ad Hoc Conference Call Between User Agents -------------------------------------- --------------------------- Header: v=0 Header: o=CiscoSystems SIP-GW-UserAgent 1397 1625 IN IP 4 192.168.5.169 Header: s=SIP Call Header: c=IN IP4 192.1 68.5.169 Header: t=0 0 Header: m=audio 20246 RTP/AVP 0 -------------------------------------- -------------- ...

  • Cisco Systems 1.3.0 - page 237

    Ad Hoc Conference Call Betw een User Agents C-181 sip-req: BYE sip:5203@192.168.46.3: 5060 SIP/2.0 [192.168.46. 180:5060- >192.168.46.3:5060] Header: Via: SIP/2.0/U DP 192.168.46.180:5060;branch=4 Header: Via: SIP/2.0/U DP 192.168.46.180:5060;branch=2 Header: Via: SIP/2.0/U DP 192.168.46.1:5060 Header: From: seymour< sip:5201@192.168.46.1:506 ...

  • Cisco Systems 1.3.0 - page 238

    C-182 Ad Hoc Conference Call Between User Agents Header: Via: SIP/2.0/U DP 192.168.46.180:5060;branch=4 Header: Via: SIP/2.0/U DP 192.168.46.180:5060;branch=2 Header: Via: SIP/2.0/U DP 192.168.46.1:5060 Header: From: seymour< sip:5201@192.168.46.1:5060;user= phone> Header: To: 5202<sip:5 202@192.168.46.180:5060;user=pho ne> Header: Call ...

  • Cisco Systems 1.3.0 - page 239

    Ad Hoc Conference Call Betw een User Agents C-183 -------------------------------------- --------------------------- SIP Headers -------------------------------------- --------------------------- sip-req: BYE sip:5203@192.168.46.18 0:5060;maddr=192.168.46.180 SIP/ 2.0 [192.168.46.1:5060->192.168.46.180:506 0] Header: Via: SIP/2.0/U DP 192.168.46 ...

  • Cisco Systems 1.3.0 - page 240

    C-184 Ad Hoc Conference Call Between User Agents ...

  • Cisco Systems 1.3.0 - page 241

    Symbols *69 call flow C-56 Numerics 1xx and 2xx B-3 3xx Responses B-3 4xx Responses B-3 5xx Responses B-4 6xx Responses B-4 900 # Admin Block 1-20 900 # User Block 1-23 A Access Level 1-4 Access list C-4 ACK B-2 adding user s, see New Adhoc confer encing A-6 Admi nist rato r 1-4 alias 1-2 9 Aliase s 1-32 Authentic ation access list C-4 digest C-6 A ...

  • Cisco Systems 1.3.0 - page 242

    Index-2 Index (Cont inued) Long Distance Admin Bloc k 1-20 Long Distance User Blo ck 1-22 Marshal 1-19 Name 1-19 Password 1-21 Static Reg Enabled 1-21 Terminating Hos t 1-21 Terminati ng Port 1-21 User Group 1-19 Delete 1-8 procedure for delet ing us ers 1-27 Digest C-6 E Edit 1-8 multiple u ser s 1 - 2 8 users 1-28 Edit user Aliase s 1-32 call b l ...

  • Cisco Systems 1.3.0 - page 243

    Index-3 Index (Cont inued) R REGISTER B-2 Registrat ion C-3 Right mouse click menu 1-16 S Screen Edit User Administra tor view 1-11 User data view 1-31 Login 1 -3 SNMP messages 2-5 User Confi guration 1-5 Set-based f eatures A-5 – A-6 adhoc confer encing A-6 call wait ing A-5 calle r ID A-5 calli ng name deliv ery A-5 calli ng number deli very A- ...

  • Cisco Systems 1.3.0 - page 244

    Index-4 Index (Cont inued) Users adding new users 1-10 deleting 1-2 7 edit multi ple users 1-28 finding user s 1-26 Load all users 1-24 – 1-27 procedure for edit ing 1-28 viewing indivi dually 1-16 – 1-18 V View 1-8 viewing users 1-16 Voice mail A-4 ...

Manufacturer Cisco Systems Category Wireless Office Headset

Documents that we receive from a manufacturer of a Cisco Systems 1.3.0 can be divided into several groups. They are, among others:
- Cisco Systems technical drawings
- 1.3.0 manuals
- Cisco Systems product data sheets
- information booklets
- or energy labels Cisco Systems 1.3.0
All of them are important, but the most important information from the point of view of use of the device are in the user manual Cisco Systems 1.3.0.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Cisco Systems 1.3.0, service manual, brief instructions and user manuals Cisco Systems 1.3.0. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Cisco Systems 1.3.0.

Similar manuals

A complete manual for the device Cisco Systems 1.3.0, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Cisco Systems 1.3.0 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Cisco Systems 1.3.0.

A complete Cisco Systems manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Cisco Systems 1.3.0 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Cisco Systems 1.3.0, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Cisco Systems 1.3.0, that we can find in the current document
3. Tips how to use the basic functions of the device Cisco Systems 1.3.0 - which should help us in our first steps of using Cisco Systems 1.3.0
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Cisco Systems 1.3.0
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Cisco Systems 1.3.0 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Cisco Systems 1.3.0?

Use the form below

If you did not solve your problem by using a manual Cisco Systems 1.3.0, ask a question using the form below. If a user had a similar problem with Cisco Systems 1.3.0 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)