-
Alpine CDA-9887 - page 1
MP3IWMAlAAC CD Receiver (illD~1m DIGITAL AUDIO I TEXT I AAC MP3 CDA-9887 • OWNER'S MANUAL Please read before using this equipment. H3'Radio™ 1JREADY ~ '~A~IO..l READY • • MODE D'EMPLOI Veuillez lire avant d'utiliser cet appareil. • MANUAL DE OPERACION Leala antes de utilizar este equipo. ALPINE ELECTRONICS MARKETI ...
-
Alpine CDA-9887 - page 2
Experience . music the way the artist intended Alpine introduces IMPRINT - the world's first technology that thoroughly eliminates in-car acoustic problems that normally degrade sound quality. • VISION vs. REALITY All good music starts as an artist's vision. After countless hours of rehearsing, recording and mixing, that vision is ready ...
-
Alpine CDA-9887 - page 3
Contents Operating Instructions WARNING WARNING 3 ,CAUTION 3 PRECAUTIONS 3 Getting Started Accessory List 6 Turning Power On and Off 6 Detaching and Attaching the Front Panel 6 Initial System Start-Up 7 Adjusting Volume 7 Lowering Volume Quickly 7 Setting the Time and Calendar 7 Radio Listening to Radio 8 Presetting Stations Manually 8 Presetting S ...
-
Alpine CDA-9887 - page 4
Setting the Subwoofer Channel (SUBW. Channel) 24 Setting the Response Slope for the High Range Speaker (TW Setup) 24 Changing Lighting Color (Illumination) 24 Dimmer Control 24 Scroll Type Setting 24 Scroll Setting (Text Scroll) 24 Switching the Character Font (Font Select) 25 S witching the Animation Display Type (BGV Select) 25 Setting of Calenda ...
-
Alpine CDA-9887 - page 5
Operating Instructions 'WARNING &WARNING This symbol means important instructions. Failure to heed them can result in serious injury or death. DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR ATTENTION AWAY FROM SAFELY DRIVING YOUR VEHICLE. Any function that requires your prolonged attention should only be performed after coming to a complete s ...
-
Alpine CDA-9887 - page 6
Never Attempt the Following Do not grip or pull out the disc while it is being pulled back into the player by the automatic reloading mechanism. Do not attempt to insert a disc into the unit when the unit power is off. Correct Handling Do not drop the disc while handling. Hold the disc so you will not leave fingerprints on the surface. Do not affix ...
-
Alpine CDA-9887 - page 7
On handling Compact Discs (CD/CD-R/CD-RW) Do not touch the surface. Do not expose the disc to direct sunlight. Do not affix stickers or labels. Clean the disc when it is dusty. Make sure that there are no bumps around the disc. Do not use commercially available disc accessories. Do not leave the disc in the car or the unit for a long time. Never ex ...
-
Alpine CDA-9887 - page 8
Getting Started 3 Grasp the front panel firmly, slide to the left 0 , and then pull. to remove. • The front panel may become hot in normal usage (especially the connector terminals on the back of the front panel). This is not a malfunction. • To protect the front panel, place it in the supplied carrying case. • When detaching the front panel, ...
-
Alpine CDA-9887 - page 9
Initial System Start-Up Be sure to press the RESET switch when using the unit for the first time, after changing the car battery, etc. 1 Turn off the unit power. 2 Press .z::: (OPEN) to open the front panel, and then remove it. 3 Press RESET with a ballpoint pen or similar pointed object. I I I ~ I 9 I RESET switch Adjusting Volume Turn the Rotary ...
-
Alpine CDA-9887 - page 10
Radio Presettlng Stations Manually 1 Press BAND repeatedly until the desired band is displayed. 2 Press anyone of the station preset buttons (1 through 6) that has your desired radio station in memory. The display shows the band, preset number and frequency of the station selected. Tuning to Preset Stations • If no stations are stored, the tuner ...
-
Alpine CDA-9887 - page 11
Frequency Search Function You can search for a radio station by its frequency. CD/MP3/WMA/ AAC ~ III lENT Rotary encoder .z:::: (OPEN) SOURCEI~ 1 Press and hold ~/ESC for at least 2 seconds in Radio mode to activate Frequency search mode. 2 Turn the Rotary encoder to select the desired frequency. 3 * Press ~/II/ENT to receive the selected frequency ...
-
Alpine CDA-9887 - page 12
5 To pause playback, press ~/II/ENT. Pressing ~/II lENT again will resume playback. 6 After pressing ~ (OPEN) to open the front panel, press ~ to eject the disc. • Do not remove a CD during its eject cycle. Do not load more than one disc at a time. A malfunction may result from doing either. • If the CD does not eject, press and hold ~ for at l ...
-
Alpine CDA-9887 - page 13
Searching from CD Text Tracks can be searched and played using the CD text on the disc. If a disc is not compatible with text, or a disc is in the changer, searches can be made by track number. 1 Press ~/ESe during play. This will set the search mode. 2 Turn the Rotary encoder to select the desired track, and then press ~ III lENT . This will play ...
-
Alpine CDA-9887 - page 14
Supported playback sampling rates and bit rates Order of files MP3 Sampling rates: 48 kHz, 44.1 kHz, 32 kHz, 24 kHz, 22.05 kHz, 16 kHz, 12 kHz, 11.025 kHz, 8 kHz Bit rates: 8 - 320 kbps Files are played back in the order that the writing software writes them to the disc. Therefore, the playback order may not be what is expected. Verify the writing ...
-
Alpine CDA-9887 - page 15
Sound Setting ~ IESC Rotary encoder (AUDIO) ~/II/ENT, SOURCEI<!.> BAND ~ o ~/RTN A. SEL FUNC.lSETUP Preset buttons MultEQ (1 through 6) Adjusting BassfTrebleIBalance (Between Left and Right)/Fader (Between Front and Rear)/Defeat 1 Press Rotary encoder (AUDIO) repeatedly to choose the desired mode. Each press changes the mode as follows: SUBWO ...
-
Alpine CDA-9887 - page 16
Setting EQ mode This setting gives you a choice of 5-band parametric, or 7 -band graphic equalizer. 1 Press and hold FUNC./SETUP for at least 2 seconds to setup the Selection mode. 2 Turn the Rotary encoder to select AUDIO mode, and then press ~ III lENT . Bluetooth H GENERAL H AUDIO H DISPLAY H TUNER* H Bluetooth 6 Press SOURCE/<b to set the ba ...
-
Alpine CDA-9887 - page 17
4 Turn the Rotary encoder to adjust the level. Adjustable output level: -6 to +6 dB About the Crossover 8 After setting, press and hold ~/ESe for at least 2 seconds to return to normal mode. • If YES is selected, the adjusted contents are protected and stored into the preset buttons. When you want to store the parameter into a protected preset bu ...
-
Alpine CDA-9887 - page 18
Level adjusting (0 to -12 dB) Output frequency range -j I .;- I~ Slope FLAT i~ - ~~~;e- ~~jUstlng I I I 20 Hz : (Different from actual display) HPF cut-off LPF cut-off frequency frequency • HPF (high pass filter): Cuts the lower frequencies and allows the higher frequencies to pass. • LPF (low pass filter): Cuts the higher frequencies and allo ...
-
Alpine CDA-9887 - page 19
F/RSUb.WL~ 3WAY slUJ 6 Turn the Rotary encoder to adjust the output level. Adjustable output level: -12 to 0 dB. 7 Repeat steps 3 to 6 to make adjustment to the other bands. • While adjusting the X-over, you should consider the frequency response of the connected speakers. • The stored contents are not deleted even when resetting the unit or di ...
-
Alpine CDA-9887 - page 20
H lCORR Parameter<inch> Time Difference Table Delay Distance Distance Delay Distance Distance Number (cm) (inch) Number (cm) (inch) 0 0.0 0.0 51 173.4 68.3 1 3.4 1,3 52 176.8 69.7 2 6.8 2.7 53 180.2 71.0 3 10.2 4.0 54 183.6 72.4 4 13,6 5.4 55 187.0 73.7 5 17.0 6.7 56 190,4 75,0 6 20.4 8.0 57 193.8 76.4 7 23.8 9.4 58 197.2 77,7 8 27,2 10.7 59 ...
-
Alpine CDA-9887 - page 21
4 Turn the Rotary encoder to adjust the distance (0.0 to 336.6cm). 5 Repeat steps 3 and 4 to set another speaker. 6 When the setting has been completed, select any one of the preset buttons (1 through 6), press and hold the desi red preset buttons for at least 2 seconds. 7 Turn the Rotary encoder to select PROTECT YES/NO, and then press ~ III lENT ...
-
Alpine CDA-9887 - page 22
The display in MP3IWMAJAAC mode: File Name Folder No.lFile No.lElapsed Time Song Name *3 File Name Folder No.lFile No.lElapsed Time Other Functions TITLE Displaying the Text Text information, such as the disc name and the track name, will be displayed if playing a CD text compatible disc. It is also possible to display the folder name, the file nam ...
-
Alpine CDA-9887 - page 23
Indicator/ CD Mode MP3/WMA/ SAT RADIO/HD iPod Mode Mode AAC Mode RADIO Mode Folder Name II - being - - displayed Song Name Song Name Song Name I!i - being being being displayed displayed displayed Artist Name Artist Name Artist Name --- - being being being displayed displayed displayed Album Name Album Name Album Name I:;i - being being being displ ...
-
Alpine CDA-9887 - page 24
SETUP You can flexibly customize the unit to suit your own preferences and usage. From the SETUP menu, Audio Setting, Display Setting, etc., can be modified. Rotary encoder ~/II/ENT SOURCEI<!> BAND ~/RTN FUNCJSETUP *1 Displayed only when INT Mute is OFF. *2 Refer to "Setting the Time and Calendar" (page 7). *3 Displayed only when Bl ...
-
Alpine CDA-9887 - page 25
Speakers Power IC ON : The speakers are driven by the built-in amplifier. Connecting to an External Amplifier Power IC ON (Initial setting) / Power IC OFF Front right Rear left Rear right Front left @):x: Amplifier ~ @):x: Amplifier ~ When an external amplifier is connected, sound quality can be improved by stopping the power supply of the built-in ...
-
Alpine CDA-9887 - page 26
AUDIO is selected on the setup main menu in step 2. DISPLAY is selected on the setup main menu in step 2. Subwoofer On and Off Subwoofer ON (Initial setting) / Subwoofer OFF When the subwoofer is on, perform the steps below to adjust the sub woofer output level. In the normal mode, press the Rotary encoder repeatedly to select the SUBWOOFER mode. S ...
-
Alpine CDA-9887 - page 27
Rotary encoder ~ III lENT SOURCE/cD BAND ..... ~ 1 2 SAT Radio Receiver (Optional) FUNC.lSETUP Preset buttons TITLE (1 through 6) ~/RTN ~/ESC You can select your favorite animation display for background from 4 types. Setting of Calendar Display Pattern Switching (Calendar) dd/mmlyyyy / yyyy/mm/dd / mm/ddlyyyy (Initial setting) You can switch the c ...
-
Alpine CDA-9887 - page 28
4 Press ~ or ~ to select the desired channel. Holding down ~ or ~ will change channels continuously. • When using the optional remote control (RUE-4190, etc.), an SAT Radio Channel can be directly called up with the numeric keypad of the remote control. While in XM or SIRIUS Radio mode, enter the Channel number you want to call up with the numeri ...
-
Alpine CDA-9887 - page 29
Initial: Update: 6 Press FUNC./SETUP to cancel the function mode. • When you want to store but the memory area is filled, "MEMORY FULL" is displayed. If you want to replace the team after you have peiformed the procedure in step 4, tum the Rotary encoder to select "REPLACE YES," and then press ~ /11 lENT. 1 Press and hold FUNC ...
-
Alpine CDA-9887 - page 30
4 Turn the Rotary encoder to select the desired Channel Name, and then press ~/II/ENT. • While in Category Search mode, press ~ IRTN to return to the selecting search mode. • The Search mode is canceled if you press and hold ~/ESC for at least 2 seconds, or no operation is peiformed for 10 seconds in Category Search mode. • If ALERT interrupt ...
-
Alpine CDA-9887 - page 31
SIRIUS mode: Category Name Channel No.lChannel Name iPod® (Optional) Rotary encoder ~/II/ENT SOURCEI<!>..... ~ ~ 4 5 GO 6 Setting the Auxiliary Data Field Display TITLE Preset buttons (1 through 6) ~/RTN ~/ESC • The unit can be used with the fourth generation and above iPod, iPod photo, iPod mini or iPod nano. iPod Shuffle cannot be used, ...
-
Alpine CDA-9887 - page 32
Searching for a desired Song An iPod can contain hundreds of songs. By using file tag information and keeping these songs organized in playlists, this unit's search functions will ease song searches. Each music category has its own individual hierarchy. Use the Playlist! Artist! Album/SonglPodcast/Genre/Composer search mode to narrow searches ...
-
Alpine CDA-9887 - page 33
Select Playlist/Artist/Album/Podcast/ Genre/Composer Playlist! Artist! AlbumIPodcast!Genre/Composer can be easily changed. For example, if you listen to a song from a selected album, the album can be changed. Repeat Play Only Repeat One is available for the iPod. Repeat One: A single song is repeatedly played back. 1 Press r:=J 4. The song is playe ...
-
Alpine CDA-9887 - page 34
~/II/ENT SOURCEI<!> BAND ~~IIJo FUNC.lSETUP Select buttons (1 through 6) Controlling CD Changer (Optional) An optional 6-disc or 12-disc CD Changer may be connected to this unit if it is Ai-NET compatible. With a CD Changer connected to the Ai-NET input of this unit, the CD Changer will be controllable from this unit. Using the KCA-400C (Mult ...
-
Alpine CDA-9887 - page 35
Remote Control Controls on Remote Control CD Source Button Press this button to select the audio source. ® Volume Adjustment Buttons To increase the volume level: Press the ItJ button To decrease the volume level: Press the M button @ • Button Radio mode: Pressing this button will select, in ascending order, stations programmed into the radio&ap ...
-
Alpine CDA-9887 - page 36
Battery Replacement Applicable battery: Use two "AAA" sized dry batteries or equivalent. 1 Opening the battery cover Slide out the battery cover while firmly pressing in the direction of the arrow. 2 Replacing the battery Insert the batteries, observing the polarities as illustrated. + 3 Closing the cover Slide the cover as illustrated un ...
-
Alpine CDA-9887 - page 37
Information In Case of Difficulty If you encounter a problem, please turn the power off, then on again. If the unit is still not functioning normally, please review the items in the following checklist. This guide will help you isolate the problem if the unit is at fault. Otherwise, make sure the rest of your system is properly connected or consult ...
-
Alpine CDA-9887 - page 38
High Temperature • Protective circuit is activated due to high temperature. - The indication will disappear when the temperature returns to normal operating range. No Disc • No CD is inserted. - Insert a CD. • Although a disc is inserted, "No Disc" is displayed and the unit does not start to play or eject the disc. - Remove the disc ...
-
Alpine CDA-9887 - page 39
OFF AIR (XM mode) Specifications • The channel currently selected has stopped broadcasting. - Select another channel. 1------------1 • The user has selected a channel number that does not exist or is not subscribed to. - The unit will revert back to the previously selected channel. • There is no artist name/feature, song/program title, or add ...
-
Alpine CDA-9887 - page 40
Installation and Connections Before installing or connecting the unit, please read the following and ~ages 3 to 5 of this manual thoroughly for proper use. ~Warning MAKE THE CORRECT CONNECTIONS. Failure to make the proper connections may result in fire or product damage. USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND. (Check with your dealer if yo ...
-
Alpine CDA-9887 - page 41
Installation Caution Do not block the unit's fan or heat sink, thus preventing air circulation. If blocked, heat will accumulate inside the unit and may cause a fire. Air ventilation hole 2 Hex Nut (M5) Metal Mounting Strap Ground Lead Screw Chassis 3 ~~ Detachable Front V Panel Caution When you install this unit in your car, do not remove the ...
-
Alpine CDA-9887 - page 42
Connections @ ~-----~-€G To iPod JAntenna c:::e=:J~---- To amplifier or equalizer To vehicle phone To the instrument cluster illumination lead ---0 ""------~ Ignition Key CJ-- To power antenna ~ + Speakers Front right e ~ Rear right ® ~ Rear left e .~ Front left I CD Changer (Sold Separately) Speakers Amplifier Rear Right Front Left Am ...
-
Alpine CDA-9887 - page 43
CD Antenna Receptacle ® Power Antenna Lead (Blue) Connect this lead to the +B terminal of your power antenna, if applicable. • This lead should be used only for controlling the vehicle's power antenna. Do not use this lead to turn on an amplifier, or a signal processor, etc. ® Remote Turn-On Lead (BluelWhite) Connect this lead to the remot ...
-
Alpine CDA-9887 - page 44
The X -Over Switch position for a 4.2ch system (frequency range is divided between highs for front/rear and lows for the Subwoofer). The position of the X-Over switch: F/RISub-W The X-Over Switch position for a 2.2ch system whose frequency range is divided among the highs (Rear), mids (Front), and lows (Subwoofer). The position of the X-Over switch ...
-
Alpine CDA-9887 - page 45
ffffMLPINE® GARANTIE LIMITEE Fideles a leur engagement de ne fournir que des produits de qualite, ALPINE ELECTRONIQUE DE L'AMERIQUE, INC. et ALPINE ELECTRONIQUE DU CANADA, INC. (Alpine) sont heureuses de vous offrir cette garantie. Nous vous suggerons de Ie lire attentivement et en entier. Si vous avez la moindre question, veuillez contacter ...
-
Alpine CDA-9887 - page 46
ffffMLPINE® LIMITED WARRANTY ALPINE ELECTRONICS OF AMERICA, INC. AND ALPINE OF CANADA INC. ("Alpine"), are dedicated to quality craftsmanship and are pleased to offer this Warranty. We suggest that you read it thoroughly. Should you have any questions, please contact your Dealer or contact Alpine at one of the telephone numbers listed be ...
-
Alpine CDA-9887 - page 47
To Cllltom.s!HlnwliI an •• d8nIA ratted. de rUlilisatlUPl informaciOn p.alos cli8ntelllnlormazioni per i clentillli kunderl lt3Pllt3p The Owner's Manual has revision as shown here. Die Bedienungsanleitung wird wie folgt erganzt. Le Mode d'emploi a subi les modifications suivantes. El Manual de operacion contiene las revisiones incluid ...
-
Alpine CDA-9887 - page 48
n manuale diistruzioni e stato revisionato in base aile indicazioni sotto riportate .. Bruksanvisningen bar den revision som visas hare ~Jijp_llfimrF!liE 0 *JfiPilPJJ=f!WjI]l'iTlE 0 ~ Agglunta dl una nota dopo j puntl 4 e 5 (vedere "Regolazlone e salvataggio deUa correzlone del tempo"). 4 Ruotare II codificatore a rotazione per regol ...
-
Alpine CDA-9887 - page 49
ffffblLPINE. Customer Care Registration ~ For easy on-line registration, go to .. www.alpine-usa.com/registration .. Thank you for choosing Alpine! Please register your product with us so we can serve you better. en m » r- :E: m :IJ m Model Year: _ 6. 0 Engineeringlfechnical 7. D Farming/Fishing 8.0 Retired 9.0S1udent 10. OOther - Purchased Year: ...
-
Alpine CDA-9887 - page 50
I II BUSINESS REPLY MAIL FIRST-CLASS MAIL PERMIT NO. 320 TORRANCE CA POSTAGE WILL BE PAID BY ADDRESSEE ATTENTION MARKETING SERVICES ALPINE ELECTRONICS OF AMERICA INC PO BOX 2859 TORRANCE CA 90509-9939 11.11111 •• 111.1.11.111.1111.1111.1111111.1.111111.11 NO POSTAGE NECESSARY IF MAILED INTHE UNITED STATES ...
-
Alpine CDA-9887 - page 51
IBRS/CCRI No. 320 HE PAS AFFRANCIIR .. fII POSTAGE NECESSARY IFMAIED TO III .18 STATES INTERNATIONAL BUSINESS REPLY MAIL/REPONSE PAYEE --- PERrtIT NO. 320 POSTAGE WlL BE PAl BY A'-SSEE TORRANCECA ALPINE ELECTRONICS 19145 GRAMERCY PL TORRANCE CA 90501-9876 UNITED STATES OF AMERICA 11.1 •• 11 •••• 1.1.11 •••••• 111.1 •? ...
Do you have a question concerning Alpine CDA-9887?
Use the form below
If you did not solve your problem by using a manual Alpine CDA-9887, ask a question using the form below. If a user had a similar problem with Alpine CDA-9887 it is likely that he will want to share the way to solve it.