English dropdown-ico

Manual Kyocera FAX SYSTEM

146 pages 2.24 mb
Download

Go to site of 146

Summary
  • Kyocera FAX SYSTEM - page 1

    AL W A YS read this Operation Guide thoroughly before use. After reading, maintain it in good condition and keep it together with the Operation Guide for your copier . F AX System ( F ) Operation Guide ...

  • Kyocera FAX SYSTEM - page 2

    NOTICE This Operation Guide contains information that corresponds to using both the inch and metric versions of fax machines using this Fax System. Since the messages and terminology for keys and indicators on those respective operation panels differs between these two versions, for purposes of clarification and easier understanding we have listed ...

  • Kyocera FAX SYSTEM - page 3

    Symbols The symbol indicates that the related section includes safety warnings. Specific points of attention are indicated inside the symbol. ........ [General warning] ........ [W arning of danger of electrical shock] ........ [W arning of high temperature] The symbol indicates that the related section includes information on prohibited actions. S ...

  • Kyocera FAX SYSTEM - page 4

    Introduction The explanations contained in this Operation Guide have been separated into different sections in order to allow those using a fax for the first time, as well as those well familiar with such operation, to use this machine efficiently , properly and with relative ease. A basic introduction to each section can be found below for referen ...

  • Kyocera FAX SYSTEM - page 5

    Introduction ii Section 5 Managing Information About Y our Fax Communications Section 6 V arious Settings and Registration in this Fax Section 7 Optional Equipment Section 8 Network F AX Settings (Option) This section contains explanations on checking the message display for information on the conditions surrounding recent fax transmissions and rec ...

  • Kyocera FAX SYSTEM - page 6

    Contents Important! Please read it first. ............................. v INST ALLA TION PRECAUTIONS ........................................... v PRECAUTIONS FOR USE ..................................................... v iii Section 1 Fax Operation (Basic Use) .......................... 1-1 Names of Parts ......................................... ...

  • Kyocera FAX SYSTEM - page 7

    Contents iv F-Code Based Relay Broadcast Communication ............. 4-17 (1) Registering F-Code Relay Boxes ..................................... 4-17 (2) Modifying and Deleting F-Code Relay Boxes ................... 4-18 (3) F-Code Based Relay Broadcast T ransmission ................. 4-19 (4) Printing Out an F-Code Relay Box List ............... ...

  • Kyocera FAX SYSTEM - page 8

    This Operation Guide contains information on using the facsimile functions of this machine. BE SURE to read the Operation Guide for your copier as well and maintain both handbooks in good condition in a location close to the machine. During use, refer to the Operation Guide for your copier for information regarding the sections listed at right. • ...

  • Kyocera FAX SYSTEM - page 9

    1-1 Section 1 Fax Operation (Basic Use) Names of Parts (1) Main Body Parts and their Functions The following contains information on the names and functions of the parts that are required when this machine is used as a facsimile. Refer to the Operation Guide for your copier for information on other parts of this machine. Main Body + Duplex Document ...

  • Kyocera FAX SYSTEM - page 10

    1-2 Section 1 Fax Operation (Basic Use) (2) Operation Panel Parts and their Functions The following contains explanations on the names and functions of the keys and indicators that are utilized when this machine is used as a facsimile. Refer to the Operation Guide for your copier for information on the keys and indicators that are utilized when thi ...

  • Kyocera FAX SYSTEM - page 11

    1-3 Section 1 Fax Operation (Basic Use) (3) Basic fax screen on the touch panel The initial screen that appears in the touch panel when you press the Fax key in any other mode in order to change to the Fax Operation mode is called the "basic fax screen". The following contains information on the basic keys which are displayed in this scre ...

  • Kyocera FAX SYSTEM - page 12

    1-4 Section 1 Fax Operation (Basic Use) 1 2 3 4 (Inch) (Inch) 1 (Inch) (Metric) 5 6 Preparations When using the fax functions of this machine for the first time after purchasing your Fax System, perform the procedures as explained in “ (1) Setting the T ype of Phone Line ” through “ (4) Setting the Date and T ime ” . * If your service repre ...

  • Kyocera FAX SYSTEM - page 13

    1-5 Section 1 Fax Operation (Basic Use) 2 3 4 5 1 2 (Inch) (Metric) (Inch) (Metric) (Inch) (Metric) 6 T ouch the “ F AX default ” key . T ouch the “ ▼ ” cursor key until “ TTI ” is highlighted and then touch the “ Change # ” key . If you want your TTI information to be sent to the other party , touch the desired location where you ...

  • Kyocera FAX SYSTEM - page 14

    1-6 Section 1 Fax Operation (Basic Use) 7 8 9 (Inch) (Metric) 3 4 5 (Inch) (Metric) ● Registering your fax number Use the keypad to enter your fax number . * The fax number can be up to 20 digits in length. * If you want to clear the currently displayed number from the message display , simply press the Stop/Clear key . * If you want to revise th ...

  • Kyocera FAX SYSTEM - page 15

    1-7 Section 1 Fax Operation (Basic Use) (Inch) (Metric) (Inch) (Metric) 3 4 5 6 2 1 (Inch) (Metric) T ouch the “ Register ” [ “ Registration ” ] key . The Registration Select screen will appear . T ouch the “ Date & T ime ” key . The currently registered information will be displayed. Use the keypad to enter the present date, in ord ...

  • Kyocera FAX SYSTEM - page 16

    1-8 Section 1 Fax Operation (Basic Use) (Inch) (Metric) (Inch) (Metric) ● Message display when Restricted Access is turned ON... Even if the fax machine is in the initial mode for fax operation, the message display will differ if Restricted Access (page 4-43) is turned ON. In this case, it is necessary to enter your access code or the registered ...

  • Kyocera FAX SYSTEM - page 17

    1-9 Section 1 Fax Operation (Basic Use) * Once the Auto Shut-Of f function engages, the main switch will turn OFF (O) and all indications on the operation panel will go out. It is therefore necessary to turn the main switch back ON ( | ) in order to send a fax or perform other fax operations on this machine. * If a fax comes in while the main switc ...

  • Kyocera FAX SYSTEM - page 18

    1-10 Section 1 Fax Operation (Basic Use) Additional operation Initial operation 1 During set-up for sending documents in the Direct Feed T ransmission mode* 2 During set-up for sending documents in the Memory T rans- mission mode 3 During scanning of documents in the Memory T ransmission mode 4 During transmission in the Direct Feed T ransmission m ...

  • Kyocera FAX SYSTEM - page 19

    1-11 Section 1 Fax Operation (Basic Use) 1 X X X O O O O O O O X X O O X 2 X X X O O O O O O O X X O O X 7 O O O X X X X O O O X O O O O 3 X X X O O O O O O O X X O O X 4 X X X X X X X O O O X X O O X 5 O O O X X X X O O O X 2 m 2 m 2 m 2 m 6 O O O X X X X O O O X O O O O 0 O O O X X X X X 1 m 1 m X 1 m 1 m 1 m X 8 O O O X X X X 1 m 1 m 1 m X 2 m 2 ...

  • Kyocera FAX SYSTEM - page 20

    1-12 Section 1 Fax Operation (Basic Use) (9) Batch T ransmission Function Any time the destination as well as the scheduled time of transmission is the same for separate sets of documents in memory , up to 10 of these multiple sets of documents will be automatically pooled together and transmitted during the same communication. This Batch T ransmis ...

  • Kyocera FAX SYSTEM - page 21

    1-13 Section 1 Fax Operation (Basic Use) (Inch) (Metric) (13) Rotate Received Documents Even if the orientation of the received documents and of the paper set in the drawers differs, if their size is the same (1 1" x 8 1/2" [A4]), this function will automatically rotate the received data 90 ˚ counter- clockwise before printing it out. No ...

  • Kyocera FAX SYSTEM - page 22

    1-14 Section 1 Fax Operation (Basic Use) 1 2 (Inch) (Metric) (Inch) (Metric) Sending Documents The following contains explanations on the standard method for transmitting documents. Carefully read all the notes regarding acceptable documents, etc., to ensure correct operation. Switching to the Fax Operation mode Check the message display to make su ...

  • Kyocera FAX SYSTEM - page 23

    1-15 Section 1 Fax Operation (Basic Use) 3 Setting the documents ● Duplex Document Processor 1 Adjust the document insert guides to match the width of the documents you want to transmit. 2 Open the eject guide when transmitting documents of a large size such as 8 1/2" x 14" [B4] or 1 1" x 17" [A3]. 3 Set the documents face-up ...

  • Kyocera FAX SYSTEM - page 24

    1-16 Section 1 Fax Operation (Basic Use) (Inch) (Metric) 4 5 Dialing a destination fax number Use the keypad to enter the destination fax number . * The destination fax number can be up to 32 digits in length. * If a mistake is made at any point in entering the fax number , touch the “ r ” or “ R ” cursor key to move the cursor to the desir ...

  • Kyocera FAX SYSTEM - page 25

    1-17 Section 1 Fax Operation (Basic Use) 1 2 4 5 (Inch) (Metric) 6 (Inch) (Metric) 7 Selecting the contrast It is possible to select a contrast from among the 3 available settings. * The default setting is for Regular contrast. 1 If you want to change the contrast, touch the “ Exposure mode ” key . 2 Select the desired contrast from among the 3 ...

  • Kyocera FAX SYSTEM - page 26

    1-18 Section 1 Fax Operation (Basic Use) 8 (Inch) (Metric) (Inch) (Metric) (Inch) (Metric) Initiating the fax transmission Press the Start key . The transmission operation will begin automatically . * Y ou can select or change the resolution or contrast during scanning or dialing. > Checking the status of the transmission... T ouch the “ Statu ...

  • Kyocera FAX SYSTEM - page 27

    1-19 Section 1 Fax Operation (Basic Use) Receiving Documents (Automatic Fax Reception) Automatic Fax Reception is the default setting for fax reception in this machine and no special settings are required for its use. * Fax reception is possible even if the main switch is turned OFF (O). If a fax comes in while the main switch is in the OFF (O) pos ...

  • Kyocera FAX SYSTEM - page 28

    1-20 Section 1 Fax Operation (Basic Use) 2 Printing out the received documents Received document(s) will be printed out and ejected face- down in the copy store section. * Up to 250 sheets of plain paper can be stored in the copy store section at one time. When the maximum number of sheets has been reached, remove all of the documents from the copy ...

  • Kyocera FAX SYSTEM - page 29

    1-21 Section 1 Fax Operation (Basic Use) (Inch) (Metric) (Inch) (Metric) (Inch) (Metric) Canceling a Communication Y ou can cancel a communication even if it is already in progress. The methods for canceling a communication differ depending on whether that communication is a fax transmission or a fax reception, and whether that transmission was ini ...

  • Kyocera FAX SYSTEM - page 30

    1-22 Section 1 Fax Operation (Basic Use) 1 2 (Inch) (Metric) (Inch) (Metric) (4) Canceling a Reception If you want to cancel a reception, perform the following procedure. T ouch the “ Status ” [ “ Act status ” ] key in the bottom right of the touch panel. The status of the communication currently in progress will appear in the message displ ...

  • Kyocera FAX SYSTEM - page 31

    1-23 Section 1 Fax Operation (Basic Use) Entering Characters The Character Input screen will appear during registration of your own name (self-station name), destination names, etc. (1) Character Input screen Uppercase input • The functions of each key in the Character input screen... “ Back ” key ...T ouch this key when you want to return to ...

  • Kyocera FAX SYSTEM - page 32

    1-24 Section 1 Fax Operation (Basic Use) 1 2 3 4 5 6 (2) Procedure V erify that the “ Capital ” key is highlighted and touch the “ K ” key . T ouch the “ Letter ” key to switch to lowercase input. T ouch the “ m ” key . T ouch the “ Num./Sym. ” key to switch to input of numerals and other available symbols. T ouch the “ @ ” ...

  • Kyocera FAX SYSTEM - page 33

    1-25 Section 1 Fax Operation (Basic Use) (Inch) (Metric) 1 2 (Inch) (Metric) 3 (Inch) (Metric) 4 One-touch Keys If you register a fax number under a one-touch key in advance, you will be able to dial that number with the touch of a key . Y ou can also use one-touch keys to designate destination fax numbers for F-Code Based Communication and Encrypt ...

  • Kyocera FAX SYSTEM - page 34

    1-26 Section 1 Fax Operation (Basic Use) 5 (Inch) (Metric) 6 7 9 10 (Inch) (Metric) (Inch) (Metric) 11 12 Use the keypad to enter the fax number you want to register under that one-touch key . (Maximum 32 digits) • “ r ” and “ R ” cursor keys...Use to move the cursor . “ Delete ” key ...T ouch to delete the character that the cursor i ...

  • Kyocera FAX SYSTEM - page 35

    1-27 Section 1 Fax Operation (Basic Use) 13 14 15 16 17 18 19 20 (Inch) (Metric) 21 Use the keypad to enter the desired subaddress and F-Code password. (Maximum 20 digits) * T o switch between the subaddress and password input screens, touch the “ Password ” key . * A subaddress is required during F-Code Based Communication in order to designat ...

  • Kyocera FAX SYSTEM - page 36

    1-28 Section 1 Fax Operation (Basic Use) (Inch) (Metric) (Inch) (Metric) 1 2 3 4 5 6 (Inch) (Metric) 7 8 9 (2) Modifying and Deleting * If the one-touch key that you want to modify is designated for F-Code Based Communication, you will NOT be able to change the designation of that key into one for Encrypted T ransmission. Likewise, if it is designa ...

  • Kyocera FAX SYSTEM - page 37

    1-29 Section 1 Fax Operation (Basic Use) (Inch) (Metric) (Inch) (Metric) (Inch) (Metric) 1 2 3 4 5 6 3 2 1 (3) Dialing Y ou can dial a fax number by simply pressing the one-touch key under which that number is registered. * T o select the conditions related to transmitting documents, such as the resolution and contrast, refer to pages 1-16 and 1-17 ...

  • Kyocera FAX SYSTEM - page 38

    1-30 Section 1 Fax Operation (Basic Use) 1 (Inch) (Metric) 2 3 4 5 6 7 8 Dialing with Abbreviated Numbers Speed-dial keys are available to be registered as either a one-touch key , a group dial key , a program key or a chain dial key . Each of these keys is given a 3-digit number between 001 and 600 and this number is referred to as that key's ...

  • Kyocera FAX SYSTEM - page 39

    1-31 Section 1 Fax Operation (Basic Use) 2 3 4 5 (Inch) (Metric) 6 Address Book The address book searches for the name of the other party as it is registered under a one-touch key , group dial key , program key or chain dial key and will dial the corresponding fax number(s) upon command. This function is extremely useful when a large number of fax ...

  • Kyocera FAX SYSTEM - page 40

    1-32 Section 1 Fax Operation (Basic Use) (Inch) (Metric) 7 8 9 10 (Inch) (Metric) (Inch) (Metric) 1 3 2 The speed-dial keys that are registered with a name that starts with that first letter will be displayed. T ouch the speed-dial key under which the desired destination is registered. * If that key is not displayed, use the " ▼ " and/o ...

  • Kyocera FAX SYSTEM - page 41

    1-33 Section 1 Fax Operation (Basic Use) 1 2 3 4 5 (Inch) (Metric) Redialing Functions Redialing refers to dialing the most recently dialed number once again. (1) Automatic Redialing When attempting to transmit documents, etc., the other party's fax machine may be busy with another communication and may not respond. In this type of situation, ...

  • Kyocera FAX SYSTEM - page 42

    2-1 Section 2 Fax Operation (V arious Functions) (Inch) (Metric) (Inch) (Metric) Duplex T ransmission Duplex T ransmission enables the transmission of both the front and back sides of duplex (2-sided) documents. Duplex transmission is always accomplished by setting the documents you want to transmit in the Duplex Document Processor and scanning the ...

  • Kyocera FAX SYSTEM - page 43

    2-2 Section 2 Fax Operation (V arious Functions) (Inch) (Metric) 7. Select whether or not you want to include a cover page with the transmission by touching either the “ Ye s ” key or the “ No ” key , as appropriate. > If you want to send a 1-sided document as a cover sheet to the rest of the 2-sided documents, select “ Ye s ” . In t ...

  • Kyocera FAX SYSTEM - page 44

    2-3 Section 2 Fax Operation (V arious Functions) (Inch) (Metric) Standby T ransmission Standby T ransmission refers to the process of preparing documents for transmission while the fax is occupied with another communication. If, during that communication, the documents you want to transmit are set and the destination fax number is entered, those do ...

  • Kyocera FAX SYSTEM - page 45

    2-4 Section 2 Fax Operation (V arious Functions) (Inch) (Metric) (Inch) (Metric) Broadcast T ransmission Broadcast T ransmission allows the same documents to be transmitted to a number of destinations one after another , in a single operation. If, for example, you want to transmit the same documents from a central office to multiple branch offices, ...

  • Kyocera FAX SYSTEM - page 46

    2-5 Section 2 Fax Operation (V arious Functions) 1 6 (Inch) (Metric) Interrupt T ransmission Interrupt T ransmission lets you send your documents before others, eliminating the need to wait until all communications are complete whenever the fax is currently scheduled for multiple communications (Broadcast T ransmission or Polling Reception, etc.), ...

  • Kyocera FAX SYSTEM - page 47

    2-6 Section 2 Fax Operation (V arious Functions) (Inch) (Metric) (Inch) (Metric) Communication Using the T imer If you designate in advance the time for a communication to begin, that communication will be carried out automatically once the appointed time is reached. Y ou can designate a communication to be one that uses the timer during the operat ...

  • Kyocera FAX SYSTEM - page 48

    2-7 Section 2 Fax Operation (V arious Functions) (Inch) (Metric) (Inch) (Metric) (Inch) (Metric) (Inch) (Metric) Chain Dial Keys If you register a chain dial number under a speed-dial key in advance, that speed-dial key will function as a chain dial key an d the chain dial key can be used to enter the initial portion of the other party ’ s fax nu ...

  • Kyocera FAX SYSTEM - page 49

    2-8 Section 2 Fax Operation (V arious Functions) (Inch) (Metric) (Inch) (Metric) (Inch) (Metric) 6. T ouch the “ Next ” key . 7. Enter the desired name for the chain dial key . (Maximum 20 characters) * In order to enter characters, refer to “ Entering Characters ” on page 1-23.) 8. Check the registered information. If you want to change an ...

  • Kyocera FAX SYSTEM - page 50

    2-9 Section 2 Fax Operation (V arious Functions) (Inch) (Metric) (Inch) (Metric) > Deleting a chain dial key 5. T ouch the “ Ye s ” key . The message display will return to the same screen as was displayed in step 3. If you want to continue deleting other chain dial keys, repeat steps 3 through 5. If you are finished deleting chain dial keys ...

  • Kyocera FAX SYSTEM - page 51

    2-10 Section 2 Fax Operation (V arious Functions) (Inch) (Metric) (Inch) (Metric) (Inch) (Metric) Editing a Communication in Memory Y ou can modify certain information relating to a scheduled communication that uses the timer or even cancel the communication c ompletely . Y ou can also print out a sample image of the corresponding documents as well ...

  • Kyocera FAX SYSTEM - page 52

    2-11 Section 2 Fax Operation (V arious Functions) (Inch) (Metric) (Inch) (Metric) (Inch) (Metric) (3) Deleting the Communication Y ou can delete a scheduled communication that is in memory and waiting for a start time. * Y ou CANNOT delete a scheduled communication that is in memory waiting to be forwarded to a destination fax. * If you want to can ...

  • Kyocera FAX SYSTEM - page 53

    2-12 Section 2 Fax Operation (V arious Functions) (Inch) (Metric) (Inch) (Metric) (Inch) (Metric) (4) Modifying the Contents of the Communication Y ou can modify the information relating to a scheduled communication that is presently saved in memory . The scheduled time for the communication to start can be changed, destinations changed, added and ...

  • Kyocera FAX SYSTEM - page 54

    2-13 Section 2 Fax Operation (V arious Functions) (Inch) (Metric) (Inch) (Metric) (Inch) (Metric) ● Deleting fax numbers 9. T ouch the “ Delete ” key . 10. T ouch the “ Ye s ” key . The message display will return to the same screen as was displayed in step 8 and you can continue to delete, add or change other fax numbers. If you are fini ...

  • Kyocera FAX SYSTEM - page 55

    2-14 Section 2 Fax Operation (V arious Functions) Manual Fax T ransmission Once you are connected with the destination party , transmission can be initiated manually by pressing the Start key . Use this mode when you want to talk to the other party prior to actual transmission of the documents, or when the other party must manually switch to fax re ...

  • Kyocera FAX SYSTEM - page 56

    2-15 Section 2 Fax Operation (V arious Functions) (Inch) (Metric) Manual Fax Reception Once you are connected with the other party , reception can be initiated manually by pressing the Start key . Use this mode when you want to talk to the other party prior to actual reception of the documents. * Conversation with the other party is only possible i ...

  • Kyocera FAX SYSTEM - page 57

    3-1 Section 3 T roubleshooting Section 3 T roubleshooting When the Fax Data Indicator is Lit... During a fax communication that use the memory , documents will be entered into memory and, to indicate this, the Fax data indicator will light. The Fax data indicator will also light when documents are received directly into memory (Memory Reception) du ...

  • Kyocera FAX SYSTEM - page 58

    3-2 Section 3 T roubleshooting _ _ _ _ _ _ _ When One of These Message is Displayed... When any of the following messages appear in the message display , follow the corresponding procedure. Message Procedure Page “ Close XX Cover . ” “ Check the cover . ” [ “ Check cover . ” ] The cover indicated in the message display is open. Close it ...

  • Kyocera FAX SYSTEM - page 59

    3-3 Section 3 T roubleshooting _ _ 9-7 _ _ 4-33 4-39 “ Call for Service ” Maintenance by qualified service personnel is required. Contact your service representative, an authorized service center or the place of purchase. If “ C ” and a 4-digit number are displayed as well, inform the service personnel of the displayed number . “ T ime fo ...

  • Kyocera FAX SYSTEM - page 60

    3-4 Section 3 T roubleshooting _ _ 9-7 4-32 2-1 1 4-13 4-38 _ 4-35 T roubleshooting T ables If you experience trouble with your fax machine, refer to the tables below for the appropriate corrective procedures. If the trouble persists, contact your service representative, an authorized service center or the place of purchase. Problem Check point Cor ...

  • Kyocera FAX SYSTEM - page 61

    3-5 Section 3 T roubleshooting 6 1-25 4-35 4-33 _ 4-4 4-21 _ 9-7 4-32 2-1 1 4-13 4-38 I am not able to perform Encrypted Communication. Did the transmitting party perform the appropriate registration procedure for the one-touch key (designated for Encrypted Transmission) as decided in advance with the receiving party? Check the information to be re ...

  • Kyocera FAX SYSTEM - page 62

    3-6 Section 3 T roubleshooting _ _ _ _ _ _ _ _ _ _ I am not able to perform Polling Reception. Did the transmitting party perform the Polling T ransmission procedure correctly? Check with the transmitting party . I am not able to perform F-Code Based Relay Broadcast T ransmission. Does the relay station fax machine have the appropriate F-Code Based ...

  • Kyocera FAX SYSTEM - page 63

    3-7 Section 3 T roubleshooting 4-10 _ _ _ 4-10 6 I am not able to print out documents from my F-Code Confidential Box. Are the subaddress and the F-Code password that you entered correct for that F-Code Confidential Box? Check the registered F-Code Confidential Box information. I am not able to perform F-Code Based Bulletin Board Reception. Does th ...

  • Kyocera FAX SYSTEM - page 64

    Section 4 Other Features of this Fax 4-1 (Inch) (Metric) Section 4 Other Features of this Fax Auto F AX/TEL Switching This reception mode is convenient for using a separately purchased telephone together with this fax on a single telephone line. If an incoming call is from a fax machine, fax reception will start automatically . If the call is from ...

  • Kyocera FAX SYSTEM - page 65

    Section 4 Other Features of this Fax 4-2 (Inch) (Metric) T AD Reception This reception mode is convenient for using a separately purchased telephone with answering machine capabilities together with this fax. If an incoming call is from a fax machine, fax reception will begin automatically . If the call is from a telephone, the functions of the ans ...

  • Kyocera FAX SYSTEM - page 66

    Section 4 Other Features of this Fax 4-3 D.R.D. Reception (A vailable in inch versions only) This reception mode utilizes the Distinctive Ring Pattern service available from some telephone companies. With this service, you can use two or more telephone numbers on a single telephone line. Thus, you can use this fax and a telephone on the same line, ...

  • Kyocera FAX SYSTEM - page 67

    Section 4 Other Features of this Fax 4-4 (Inch) (Metric) (Inch) (Metric) Remote Switching Remote Switching lets you initiate fax reception from a telephone that is connected to this fax machine. This function is thus convenient if you want to be able to initiate fax reception from a location separate from the fax machine itself. * Remote Switching ...

  • Kyocera FAX SYSTEM - page 68

    Section 4 Other Features of this Fax 4-5 1 2 3 4 6 (2) Operation When you want to initiate fax reception from a telephone that is connected to this fax machine, perform the following procedure. 1. When a call comes in, the telephone will ring. 2. Pick up the telephone receiver . 3. If you hear a fax tone, use the tone signal capabilities of the tel ...

  • Kyocera FAX SYSTEM - page 69

    Section 4 Other Features of this Fax 4-6 (Inch) (Metric) (Inch) (Metric) (Inch) (Metric) Polling Communication Polling refers to the method of communication whereby transmission is not initiated by the transmitting party , but is requested and initiated at the convenience of the receiving party . There are two types of polling procedures available ...

  • Kyocera FAX SYSTEM - page 70

    Section 4 Other Features of this Fax 4-7 (Inch) (Metric) (Inch) (Metric) 7. T ouch the “ Confirm ” key . If you selected “ Overwrite ” , the message display will return to the same screen as was displayed in step 4. 8. Select any related transmission settings that you want to use. * If the optional Duplex Document Processor is installed and ...

  • Kyocera FAX SYSTEM - page 71

    Section 4 Other Features of this Fax 4-8 (Inch) (Metric) 3. Enter the fax number of the transmitting party . * Y ou can enter the fax number using the keypad, abbreviated numbers, one-touch keys, group dial keys or the address book. Chain dial keys can be used as well. 4. If you want to designate a time for the reception to begin, touch the “ Del ...

  • Kyocera FAX SYSTEM - page 72

    Section 4 Other Features of this Fax 4-9 F-Code Based Communication F-Code Based Communication involves fax communication that includes certain codes (in the form of numbers and symbols), the base of a protocol that has been adopted for use by other facsimile manufacturers as well. By using these codes, such operations as Confidential Communication ...

  • Kyocera FAX SYSTEM - page 73

    4-10 Section 4 Other Features of this Fax (Inch) (Metric) (Inch) (Metric) (Inch) (Metric) F-Code Based Confidential Communication F-Code Based Confidential Communication involves the reception of documents into an F-Code Confidential Box that is registered in the receiving party's fax. In this way , confidential documents can be received witho ...

  • Kyocera FAX SYSTEM - page 74

    4-11 Section 4 Other Features of this Fax (Inch) (Metric) (Inch) (Metric) (2) Modifying and Deleting F-Code Confidential Boxes Perform the following procedure when you want to modify the registered subaddress or F-Code password for an F-Code Confidential Box, as well as when you want to completely delete one of those boxes. * In order to modify the ...

  • Kyocera FAX SYSTEM - page 75

    4-12 Section 4 Other Features of this Fax (Inch) (Metric) (Inch) (Metric) (3) F-Code Based Confidential T ransmission It is necessary for you to perform the following procedure in order to transmit documents to an F-Code Confidential Box that is registered in the destination party's fax machine. * If you designate a time for the transmission t ...

  • Kyocera FAX SYSTEM - page 76

    4-13 Section 4 Other Features of this Fax (4) Printing Out Documents from an F-Code Confidential Box Perform the following procedure to print out documents that have been received into your F-Code Confidential Box. If the documents are printed out correctly , the data will be deleted from that box. If you are using an F-Code Confidential Box for F- ...

  • Kyocera FAX SYSTEM - page 77

    4-14 Section 4 Other Features of this Fax (Inch) (Metric) (Inch) (Metric) (Inch) (Metric) 3. T ouch the key that corresponds to the desired F-Code Confidential Box if it is highlighted. If the key is not highlighted, there are no documents in that box. * If you registered “ 0000 ” as the F-Code password, go to the next step. If you registered a ...

  • Kyocera FAX SYSTEM - page 78

    4-15 Section 4 Other Features of this Fax (Inch) (Metric) 2. T ouch the “ Application ” key . The Application screen will appear. 3. T ouch the “ Scan orig. to box ” key . 4. T ouch the key which displays the subaddress for the F-Code Confidential Box you want to enter documents into. If you want simply to add documents to those already in ...

  • Kyocera FAX SYSTEM - page 79

    4-16 Section 4 Other Features of this Fax (Inch) (Metric) (Inch) (Metric) (Inch) (Metric) 1. T ouch the “ Application ” key . The Application screen will appear . 2. T ouch the “ RX Polling ” key . 3. Use the keypad to enter the fax number of the transmitting party . * Y ou can also enter the fax number using one-touch keys that have been d ...

  • Kyocera FAX SYSTEM - page 80

    4-17 Section 4 Other Features of this Fax (Inch) (Metric) (Inch) (Metric) (Inch) (Metric) F-Code Based Relay Broadcast Communication F-Code Based Relay Broadcast Communication involves the transmission of documents to multiple, long distance destinations by transmitting the documents through a relay station, generally located between the initial tr ...

  • Kyocera FAX SYSTEM - page 81

    4-18 Section 4 Other Features of this Fax (Inch) (Metric) (Inch) (Metric) (Inch) (Metric) 8. Repeat steps 1 and 2 below until all of the final destination fax numbers are registered. (Max. 300 destinations) 1 Enter the fax number of a final destination. * Y ou can use the keypad, abbreviated numbers, one-touch keys and group dial keys to enter the ...

  • Kyocera FAX SYSTEM - page 82

    4-19 Section 4 Other Features of this Fax (Inch) (Metric) (Inch) (Metric) 4. T ouch the “ Confirm ” key . 5. If you want to completely delete the F-Code Relay Box, touch the “ Delete ” key and go to the next step. If you want to modifiy the information for that F-Code Relay Box, touch the “ Change contents ” key and go to step 7. > D ...

  • Kyocera FAX SYSTEM - page 83

    4-20 Section 4 Other Features of this Fax (Inch) (Metric) (Inch) (Metric) (Inch) (Metric) 3. T ouch the “ Subadd. ” key . 4. T ouch the “ On ” key . 5. Use the keypad to enter the appropriate subaddress. * This subaddress is required during an F-Code Based Communication in order to designate the box in the destination party's fax. It c ...

  • Kyocera FAX SYSTEM - page 84

    4-21 Section 4 Other Features of this Fax (Inch) (Metric) (Inch) (Metric) Fax Forwarding Fax Forwarding allows documents received during designated hours to be saved into memory and automatically forwarded to another fax number that is registered in advance. In order to use Fax Forwarding, the destination and designated hours must be registered her ...

  • Kyocera FAX SYSTEM - page 85

    4-22 Section 4 Other Features of this Fax (Inch) (Metric) (Inch) (Metric) (Inch) (Metric) 8. T ouch the “ Shut-off T ime ” key and use the keypad to enter the desired time for Fax Forwarding to end. 9. T ouch the “ Next ” key . The currently registered information will be displayed. 10. Check that information and touch the key that correspo ...

  • Kyocera FAX SYSTEM - page 86

    4-23 Section 4 Other Features of this Fax (Inch) (Metric) (Inch) (Metric) (Inch) (Metric) Group Dial Keys If you register multiple destinations under a speed-dial key in advance, that key will then function as a group dial key and you will be able to dial all those number with the touch of a key . * Group dial keys can be used for entering the othe ...

  • Kyocera FAX SYSTEM - page 87

    4-24 Section 4 Other Features of this Fax (Inch) (Metric) (Inch) (Metric) 9. T ouch the “ OK ” key . The message display will return to the same screen as was displayed in step 3. If you want to continue registering other group dial keys, repeat steps 3 through 9. If you are finished registering group dial keys, press the Reset key . (2) Modify ...

  • Kyocera FAX SYSTEM - page 88

    4-25 Section 4 Other Features of this Fax (Inch) (Metric) (Inch) (Metric) (Inch) (Metric) (3) Dialing * Y ou CANNOT use group dial keys in combination with chain dial keys. * Y ou can use group dial keys not only for standard transmission, but also for such operations as Broadcast T ransmission and Polling Reception. 1. If the operation involves th ...

  • Kyocera FAX SYSTEM - page 89

    4-26 Section 4 Other Features of this Fax (Inch) (Metric) (Inch) (Metric) (Inch) (Metric) (Inch) (Metric) Program Keys The operational procedures for various types of communication, such as Broadcast T ransmission, Polling reception, etc., can be registered under a speed-dial key that will then function as a program key for one-touch operation. It ...

  • Kyocera FAX SYSTEM - page 90

    4-27 Section 4 Other Features of this Fax (Inch) (Metric) (Inch) (Metric) 10. T ouch the “ Finish dest. Set ” [ “ Dest. set ” ] key . 1 1. Enter a name for the program. (Maximum 20 characters) * In order to enter characters, refer to “ Entering Characters ” on page 1-23.) 12. Check the currently registered information and touch the key ...

  • Kyocera FAX SYSTEM - page 91

    4-28 Section 4 Other Features of this Fax (Inch) (Metric) (Inch) (Metric) (Inch) (Metric) (3) Using a Program Key 1. If the operation involves the transmission of documents, set the documents you want to transmit. If it involves a polling reception, go directly to step 5. 2. If you want to change the transmission conditions, such as the resolution ...

  • Kyocera FAX SYSTEM - page 92

    4-29 Section 4 Other Features of this Fax (Inch) (Metric) (Inch) (Metric) Password Check Communication Password Check Communication allows you to limit to and from whom fax communication can be accomplished but making it necessary to meet specific conditions regarding certain passwords. More specifically , the passwords (Permit T elephone Number an ...

  • Kyocera FAX SYSTEM - page 93

    4-30 Section 4 Other Features of this Fax (Inch) (Metric) (Inch) (Metric) (Inch) (Metric) (Inch) (Metric) 5. Use the keypad to enter the desired Permit T elephone Number . (Maximum 20 digits) * Y ou can use the “ r ” and/or “ R ” keys to move the cursor to a desired location, and you can clear the entered number by touching the “ Delete ? ...

  • Kyocera FAX SYSTEM - page 94

    4-31 Section 4 Other Features of this Fax (Inch) (Metric) (Inch) (Metric) (Inch) (Metric) (Inch) (Metric) 2. T ouch the “ Password check ” key . 3. T ouch the “ Permit ID No. ” [ “ Permit ID nr . ” ] key . 4. T ouch an unregistered key . * The information will be displayed for all keys that have already been registered. 5. Use the keypa ...

  • Kyocera FAX SYSTEM - page 95

    4-32 Section 4 Other Features of this Fax (Inch) (Metric) (Inch) (Metric) (5) T urning Password Check Communication ON/OFF T urn Password Check Communication ON when you want to limit to and from whom fax communication can be accomplished. There are separate settings for controlling transmissions and receptions. * If there are no Permit T elephone ...

  • Kyocera FAX SYSTEM - page 96

    4-33 Section 4 Other Features of this Fax (Inch) (Metric) (Inch) (Metric) Encrypted Communication Encrypted Communication involves the encryption of documents prior to their transmission. In this way , third parties are prevented from seeing the actual documents even if they should be able to access the transmission itself. Those documents are then ...

  • Kyocera FAX SYSTEM - page 97

    4-34 Section 4 Other Features of this Fax (Inch) (Metric) (Inch) (Metric) (Inch) (Metric) 4. T ouch an unregistered key . * The information will be displayed for all keys that have already been registered. 5. Use the numerals (0 - 9) and the English alphabet (A - Z) that is shown on the touch panel to create the desired 16-character Encryption Key ...

  • Kyocera FAX SYSTEM - page 98

    4-35 Section 4 Other Features of this Fax (Inch) (Metric) (Inch) (Metric) (Inch) (Metric) (3) Registering Encryption Boxes An Encryption Box must be registered in your fax machine in order to receive an Encryption Communication. During that registration procedure, you will also need to select whether or not you want the received documents to be pri ...

  • Kyocera FAX SYSTEM - page 99

    4-36 Section 4 Other Features of this Fax (Inch) (Metric) (Inch) (Metric) (4) Modifying and Deleting Encryption Boxes * If you want to cancel the procedure part way through, press the Reset key . The touch panel will return to the initial mode settings. 1. Perform steps 1 through 3 of “ (3) Registering Encryption Boxes ” on page 4-35. 2. T ouch ...

  • Kyocera FAX SYSTEM - page 100

    4-37 Section 4 Other Features of this Fax (Inch) (Metric) 4. Use the one-touch key described in step 2 to enter the destination fax number . 5. Press the Start key . The transmission operation will begin. * If the Encryption Key ID designated for the one-touch key is no longer registered in this fax, an error will occur and the transmission will no ...

  • Kyocera FAX SYSTEM - page 101

    4-38 Section 4 Other Features of this Fax (Inch) (Metric) (Inch) (Metric) (Inch) (Metric) (7) Printing Out Documents from an Encryption Box Perform the following procedure to print out documents that have been received into your Encryption Box. If the documents are printed out correctly , the data will be deleted from that box. * If you registered ...

  • Kyocera FAX SYSTEM - page 102

    4-39 Section 4 Other Features of this Fax (Inch) (Metric) (Inch) (Metric) (Inch) (Metric) (Inch) (Metric) (8) Printing Out an Encryption Key List Print out this list in order to check the contents of Encryption Keys currently registered in this fax. * Print out of this list is only possible if the currently registered management password is entered ...

  • Kyocera FAX SYSTEM - page 103

    4-40 Section 4 Other Features of this Fax Restricted Access By allowing certain communication and operation only upon entry of one of the viable access codes, use of this fax – such as the number of communications initiated – can be effectively scrutinized for up to 50 individual departments by printing out the corresponding report. * It is nec ...

  • Kyocera FAX SYSTEM - page 104

    4-41 Section 4 Other Features of this Fax (Inch) (Metric) (Inch) (Metric) 2 If Restricted Access is turned ON, you must enter the management password when... • printing out any report or list other than the Activity Report. • performing any setting or registration procedure. W ARNING! It is suggested that you make some sort of note of the new m ...

  • Kyocera FAX SYSTEM - page 105

    4-42 Section 4 Other Features of this Fax (Inch) (Metric) (Inch) (Metric) (Inch) (Metric) (Inch) (Metric) 1. T ouch the “ Register ” [ “ Registration ” ] key . The Registration Select screen will appear . 2. T ouch the “ Restricted Access ” key . 3. T ouch the “ Access Code ” key . 4. Use the keypad to enter the currently registered ...

  • Kyocera FAX SYSTEM - page 106

    4-43 Section 4 Other Features of this Fax (Inch) (Metric) (Inch) (Metric) (Inch) (Metric) 3. If you want to delete the registered access code, touch the “ Delete ” key and then go to the next step. If you want to modify the registered information, touch the “ Change contents ” key and then go directly to step 5. > Deleting an access code ...

  • Kyocera FAX SYSTEM - page 107

    4-44 Section 4 Other Features of this Fax (Inch) (Metric) (Inch) (Metric) 2. T ouch the “ Print Report ” key . The Report Selection screen will appear . > If you entered your access code... 3. T ouch the “ Restricted access rep ” key . If you entered your access code in step 1, go to the next step. If you entered the management password, ...

  • Kyocera FAX SYSTEM - page 108

    4-45 Section 4 Other Features of this Fax (Inch) (Metric) (Inch) (Metric) (7) Printing Out a Department List Print out this list in order to check the access codes and corresponding department names currently registered in this fax. * Y ou will need to turn Restricted Access ON and enter the registered management password before you can print out t ...

  • Kyocera FAX SYSTEM - page 109

    Section 5 Managing Information About Y our Fax Communications 5-1 (Inch) (Metric) (Inch) (Metric) Section 5 Managing Information About Y our Fax Communications Communication Result Display Y ou can use the message display to check certain information regarding the 10 most recent fax transmissions and/or receptions. The communication result display ...

  • Kyocera FAX SYSTEM - page 110

    Section 5 Managing Information About Y our Fax Communications 5-2 (Inch) (Metric) (Inch) (Metric) (2) Reception Result Display Information for up to 10 of the most recent fax receptions can be checked in the message display . * If you want to cancel the procedure part way through, press the Reset key . The touch panel will return to the initial mod ...

  • Kyocera FAX SYSTEM - page 111

    Section 5 Managing Information About Y our Fax Communications 5-3 (Inch) (Metric) (Inch) (Metric) (Inch) (Metric) (Inch) (Metric) Printing the Management Reports/Lists The results of your fax communications as well as certain fax-related settings in this machine can be checked whenever you want by printing out different management reports. The foll ...

  • Kyocera FAX SYSTEM - page 112

    Section 5 Managing Information About Y our Fax Communications 5-4 (Inch) (Metric) (Inch) (Metric) (3) User Setting List Print out this list in order to check the settings made (Line T ype, etc.) and other registered information (own name, etc.) in this fax. * If you want to cancel the procedure part way through, press the Reset key . The touch pane ...

  • Kyocera FAX SYSTEM - page 113

    Section 6 V arious Settings and Registration 6-1 (Inch) (Metric) (Inch) (Metric) Section 6 V arious Settings and Registration T urning Report Print Out ON/OFF Five different reports can be printed out for checking such points as whether a transmission or reception was accomplished correctly or not. Y ou can also have each of these reports printed o ...

  • Kyocera FAX SYSTEM - page 114

    Section 6 V arious Settings and Registration 6-2 (Inch) (Metric) (Inch) (Metric) T urning the Bulletin Board ON/OFF If you use the Bulletin Board function, you only need to enter documents into memory once and they will be available for transmission to any number of receiving parties upon receipt of their polling request. (Refer to “ (1) Polling ...

  • Kyocera FAX SYSTEM - page 115

    Section 6 V arious Settings and Registration 6-3 (Inch) (Metric) (Inch) (Metric) (Inch) (Metric) Setting the Number of Rings (Auto Fax Reception) The number of times the fax will “ ring ” before an incoming call is answered in the Auto Fax Reception mode, the Auto F AX/TEL Switching mode [this setting is not available in metric models] or the T ...

  • Kyocera FAX SYSTEM - page 116

    Section 6 V arious Settings and Registration 6-4 (Inch) (Metric) (Inch) (Metric) (Inch) (Metric) 4. T ouch the “ Change # ” key . 5. Select the desired alarm volume from among “ Large ” , “ Small ” and “ Off ” . 6. Select the desired monitor volume from among “ Large ” , “ Medium ” , “ Small ” and “ Off ” . 7. Select ...

  • Kyocera FAX SYSTEM - page 117

    Section 6 V arious Settings and Registration 6-5 (Inch) (Metric) (Inch) (Metric) (Inch) (Metric) (Inch) (Metric) Setting the Default T ransmission Mode Y ou can select which transmission mode, Memory Transmission or Direct Feed T ransmission, will be the default setting in this fax. If you select “ Dir . Feed Tx ” here, the “ Dir . Feed Tx ? ...

  • Kyocera FAX SYSTEM - page 118

    Section 6 V arious Settings and Registration 6-6 (Inch) (Inch) (Metric) (Inch) (Metric) 6. If you selected “ Fax Reception ” [ “ Fax Rx ” ] or “ Auto Fax/T el. SW ” , touch the “ Close ” key . If you are finished making settings, press the Reset key . 7. Select the desired ring pattern. • Pattern 1: Normal Ring [1 ring] • Patter ...

  • Kyocera FAX SYSTEM - page 119

    Section 6 V arious Settings and Registration 6-7 (Inch) (Metric) 5. Select whether you want to turn Reception Date and T ime Print Out ON or OFF by touching either the “ ON ” or “ OFF ” key , as appropriate. 6. T ouch the “ Close ” key . If you are finished making settings, press the Reset key . Selecting the Paper Feed Selection Mode S ...

  • Kyocera FAX SYSTEM - page 120

    Section 6 V arious Settings and Registration 6-8 (Inch) (Metric) (Inch) (Metric) (Inch) (Metric) 3. T ouch the “ ▼ ” key until “ Fax pap.feeding tray ” [ “ Fax paper tray ” ] is highlighted. 5. Select the desired paper feed mode by touching either the “ Auto Select ” [ “ Auto sel. ” ] key , the “ Fix Size ” [ “ Fixed siz ...

  • Kyocera FAX SYSTEM - page 121

    Section 6 V arious Settings and Registration 6-9 (Inch) (Metric) (Inch) (Metric) (Inch) (Metric) (Inch) (Metric) T urning 2 in 1 Reception ON/OFF If 2 in 1 reception is turned ON and two 5 1/2" x 8 1/2" [A5] size pages are received in a row during the same reception, those 2 pages will be printed onto a single sheet of 1 1" x 8 1/2&q ...

  • Kyocera FAX SYSTEM - page 122

    Section 6 V arious Settings and Registration 6-10 (Inch) (Metric) (Inch) (Metric) Registering the Remote T est ID If you have entered into a contract with an authorized service center for their Remote Diagnosis service, it is necessary to register here in advance the Remote T est ID that they designate for you. * A previously registered Remote T es ...

  • Kyocera FAX SYSTEM - page 123

    Section 7 Optional Equipment 7-1 (Inch) (Metric) (Inch) (Metric) Section 7 Optional Equipment Duplex Unit (Duplex Reception ON/OFF) By installing the optional Duplex Unit, Duplex Reception – in which paper is turned over inside the fax machine and printing accomplished on the back side – will be possible. When the width of each page received is ...

  • Kyocera FAX SYSTEM - page 124

    8-1 Section 8 Network F AX Settings (Option) This section contains explanations on the Network F AX functions available when the optional Printer/Scanner Kit is installed on this F AX machine and in particular on the setup procedure and settings to be performed on the machine. As the contents of the settings will differ according to the environment ...

  • Kyocera FAX SYSTEM - page 125

    8-2 Section 8 Network F AX Settings (Option) Setup In order to use the Network F AX functions, the following setup procedure needs to be performed. PC Hub PC [Example connection] Connect the network cable (100 BASE-TX or 10 BASE-T) to the F AX machine. See page 8-3. 1 1 1 1 1 Connecting the F AX machine and the computer 2 2 2 2 2 Procedure on the F ...

  • Kyocera FAX SYSTEM - page 126

    8-3 Section 8 Network F AX Settings (Option) 1 2 3 1 2 3 4 Connecting the F AX machine and the computer Turn the main switch of the F AX machine OFF (O). Note: Always make sure to turn the main switch of the F AX machine OFF (O) before connecting the network cable. Insert the connector of an Ethernet 10BASE-T cable or 100BASE-TX cable into the scan ...

  • Kyocera FAX SYSTEM - page 127

    8-4 Section 8 Network F AX Settings (Option) 1 2 3 4 1 6 5 4 2 3 6 7 Select whether you want to print out the documents received with this machine or not by touching either the “ On ” or “ Off ” key , as appropriate. T ouch the “ Close ” key . If you are finished making settings, press the Reset key . (2) Setting for Saving the Document ...

  • Kyocera FAX SYSTEM - page 128

    8-5 Section 8 Network F AX Settings (Option) 1 2 3 4 5 6 7 Network F AX Registration Register the following items when you want to use the Network F AX functions. • File name (T ransmission/Reception) ...For registering the default file name when documents which have been transmitted or received using the Network F AX functions are saved in the d ...

  • Kyocera FAX SYSTEM - page 129

    8-6 Section 8 Network F AX Settings (Option) 8 9 10 12 13 14 Enter the IP address (numerals) or the host name (using the English alphabet, numerals or other available symbols). (Maximum 32 digits) Use the keypad to enter numerals. (Inch) (Metric) * “ Shift ” key: T ouch this key when you want to switch between uppercase and lowercase input. “ ...

  • Kyocera FAX SYSTEM - page 130

    8-7 Section 8 Network F AX Settings (Option) 15 16 17 1 2 3 T ouch the “ Save Tx. original ” key and use the keypad to enter the save folder number for transmitted documents in the same manner as you did for received documents. (Inch) (Metric) * “ Clear ” key: T ouch this key when you want to reenter the number . “ Stop ” key: T ouch th ...

  • Kyocera FAX SYSTEM - page 131

    Section 9 Reference Information 9-1 Section 9 Reference Information Specifications T ype ............................................................ Optional F AX Kit Compatibility ............................................... Group 3 Line Requirement ........................................ Subscription telephone line T ransmission Speed ...... ...

  • Kyocera FAX SYSTEM - page 132

    Section 9 Reference Information 9-2 ÄÅ Ö Ø Æ !@ = äå ö ø æ ;? [ ] % ! @ = ;? [ ] % ! @ = ÄÅ Ö Ø Æ !@ = äå ö ø æ Œ ?[ ] % ! @ = œ ÄÜ Ö ß %! @ = äü ö È ?[ ] % ! @ = è ao ¿ ? ¡ ! Ñ = ñ ÁÃ Ó Õ É Ê Í Ç áã ó õ é ê í ç ÄÅ Ö Ø Æ !@ = äå ö ø æ ÅÉ Ø Æ %! @ = åé ø æ æ ;? [ ] % ! @ = Display ...

  • Kyocera FAX SYSTEM - page 133

    Section 9 Reference Information 9-3 Paper Size and Priority Feed Chart (Inch version) If the drawers do not contain paper that is of a size and orientation exactly the same as that of the received documents, the F AX will automatically select the most appropriate paper for print out. The following chart indicates the order of priority for paper sel ...

  • Kyocera FAX SYSTEM - page 134

    Section 9 Reference Information 9-4 <Notes for this Chart> * The top edge of the paper in these illustrations indicates the direction of feed for transmission or print out. * FL refers to Folio size paper . * If the same size of paper is set in more than one location, the upper drawer will have priority for paper feed. * If the either of the ...

  • Kyocera FAX SYSTEM - page 135

    Section 9 Reference Information 9-5 Menu Flow Charts The following charts represent the flow of the message display when the “ function ” keys on the touch panel ( “ Application ” , “ Register ” [ “ Registration ” ] and “ Print Report ” ) are touched, as well as when the Default key is pressed. Refer to this chart as a reference ...

  • Kyocera FAX SYSTEM - page 136

    Section 9 Reference Information 9-6 Default key “ F AX default ” key T ype of Phone Line (Inch version only) TTI T ransmission ON/OFF Report Print Out ON/OFF Password Check Communication ON/OFF F AX Forwarding ON/OFF Bulletin Board Function ON/OFF Number of Rings (Auto F AX Reception) V olume Settings Document Size for Scanning from the Documen ...

  • Kyocera FAX SYSTEM - page 137

    Section 9 Reference Information 9-7 CODE CAUSE AND/OR PROCEDURE FOR CORRECTION Busy Stopped U00300 U00420 - U00462 U00600 - U00690 U00700 U00800 U00810 U00900 U00910 U01000 - U01092 U01 100 - U01 199 U01400 U01600 U01700 U01720 The line is busy or the other party does not answer after automatically redialling the set number of times. Perform transm ...

  • Kyocera FAX SYSTEM - page 138

    Section 9 Reference Information 9-8 CODE CAUSE AND/OR PROCEDURE FOR CORRECTION U01721 U01800 - U01820 U01821 U02200 U02400 U03000 U03200 U03300 U03400 U03500 A communication error occurred during transmission at high transmission speed. The destination party ’ s F AX may not have the corresponding high speed reception capabilities. If the destina ...

  • Kyocera FAX SYSTEM - page 139

    Section 9 Reference Information 9-9 CODE CAUSE AND/OR PROCEDURE FOR CORRECTION U03600 U03700 U04000 U04100 U04200 U04300 U04400 U04401 U04500 U05100 U05200 U05300 The transmitting party ’ s F AX is one of our models and an F-Code Based Bulletin Board Reception was attempted in order to receive documents from that party ’ s F-Code Box, but was u ...

  • Kyocera FAX SYSTEM - page 140

    Section 9 Reference Information 9-10 CODE CAUSE AND/OR PROCEDURE FOR CORRECTION U09000 U12000 U14000 U14100 U19000 U19100 U19200 U19300 U19400 Communication was attempted but, but was unsuccessful because the other party ’ s F AX does not match the communication protocol in use (the other party is using a G2 facsimile). An F-Code Based Relay Broa ...

  • Kyocera FAX SYSTEM - page 141

    FCC P ART 68 REQUIREMENTS 1. This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACT A. On the rear side cover of the equipment to install F AX System (F) is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. If requested, this number must be provided to the tele ...

  • Kyocera FAX SYSTEM - page 142

    IMPORT ANT SAFETY INSTRUCTIONS When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: 1. Do not use this product near water , for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a sw ...

  • Kyocera FAX SYSTEM - page 143

    CANADIAN IC REQUIREMENTS “ This product meets the applicable Industry Canada technical specifications ” “ The Ringer Equivalence Number is an indication of the maximum number of devices allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement th ...

  • Kyocera FAX SYSTEM - page 144

    W ARNING This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio freq ...

  • Kyocera FAX SYSTEM - page 145

    This machine has passed all quality controls and final inspection. ...

  • Kyocera FAX SYSTEM - page 146

    2002. 8 3DB80020A ...

Manufacturer Kyocera Category Fax Machine

Documents that we receive from a manufacturer of a Kyocera FAX SYSTEM can be divided into several groups. They are, among others:
- Kyocera technical drawings
- FAX SYSTEM manuals
- Kyocera product data sheets
- information booklets
- or energy labels Kyocera FAX SYSTEM
All of them are important, but the most important information from the point of view of use of the device are in the user manual Kyocera FAX SYSTEM.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Kyocera FAX SYSTEM, service manual, brief instructions and user manuals Kyocera FAX SYSTEM. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Kyocera FAX SYSTEM.

Similar manuals

A complete manual for the device Kyocera FAX SYSTEM, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Kyocera FAX SYSTEM by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Kyocera FAX SYSTEM.

A complete Kyocera manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Kyocera FAX SYSTEM - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Kyocera FAX SYSTEM, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Kyocera FAX SYSTEM, that we can find in the current document
3. Tips how to use the basic functions of the device Kyocera FAX SYSTEM - which should help us in our first steps of using Kyocera FAX SYSTEM
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Kyocera FAX SYSTEM
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Kyocera FAX SYSTEM in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Kyocera FAX SYSTEM?

Use the form below

If you did not solve your problem by using a manual Kyocera FAX SYSTEM, ask a question using the form below. If a user had a similar problem with Kyocera FAX SYSTEM it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)