English dropdown-ico

Manual Miele KM2030 en-CA

18 pages 1.08 mb
Download

Go to site of 18

Summary
  • Miele KM2030 en-CA - page 1

    Installation Instructions KM2030 en-CA IMPORTANT: SAVE FOR THE LOCAL ELECTRICAL INSPECTOR'S USE To prevent accidents and machine damage read these instructions before installation or use. Installation, repair and maintenance work should be performed by a Miele authorized service technician in accordance with national and local safety regulatio ...

  • Miele KM2030 en-CA - page 2

    To avoid damage to the appliance, it should not be installed until the upper cabinet and exhaust hood have already been mounted. ~ This appliance is not connected to an exhaust vent. It must be installed and connected to the power supply in compliance with the applicable installation requirements. ~ The room will need to be at least 20 m 3 in volum ...

  • Miele KM2030 en-CA - page 3

    Upper clearance For an exhaust hood above the appliance, the safe clearance distance indicated by the hood manufacturer must be maintained. If there are no specifications from the hood manufacturer or if flammable materials (e. g., a hanging cabinet) are installed above the appliance, the clearance distance must be at least 30" (760 mm). The m ...

  • Miele KM2030 en-CA - page 4

    When installing a gas stovetop, the cabinetry or walls to ONE side and to the rear of the appliance can be as tall as you wish. However, on the other side there must not be any appliance or furniture that is taller than the installed gas stovetop (see illustrations). You must ensure that the following minimum safety clearances are kept: – 4" ...

  • Miele KM2030 en-CA - page 5

    KM 2030 a front b Installation height c Gas connection R 1/2" ISO 7-1 d Junction box with power cable ,L=7 8 3 / 4 " (2000 mm) Appliance and installation dimensions 29 ...

  • Miele KM2030 en-CA - page 6

    KM 2050 a front b Installation height c Gas connection R 1/2" ISO 7-1 d Junction box with power cable ,L=7 8 3 / 4 " (2000 mm) Appliance and installation dimensions 30 ...

  • Miele KM2030 en-CA - page 7

    How to make the countertop cut-out ^ Use the template to make a countertop cut-out. Be sure to observe the minimum distance from the rear wall and from the left or right to a side wall . See the section on "SAFETY NOTICES FOR INSTALLATION". ^ Seal any wooden countertop surfaces with a special varnish, silicone rubber, or resin, to help pr ...

  • Miele KM2030 en-CA - page 8

    Sealing NEVER use sealing unless it is explicitly called for in the instructions. The sealing strip under the edge of the upper part of the appliance provides a sufficient seal against the countertop. NEVER use sealing between the upper appliance frame and the countertop! It will hinder access to the appliance during servicing, and the frame and co ...

  • Miele KM2030 en-CA - page 9

    This appliance must be grounded according to local or national codes. All electrical work should be performed by a qualified electrician in accordance with local codes and with the: - National Electrical Code ANSI / NFPA 70 for the USA or - Canadian Electrical Code Part I for Canada (CSA Standard C 22.1) , WARNING Disconnect the appliance from the ...

  • Miele KM2030 en-CA - page 10

    Installation and service must be performed by a qualified installer, service agency or the gas supplier. This appliance must be installed with its own shut off valve and the included gas pressure regulator. Both the valve and the regulator must be easily accessible to the consumer to turn on or shut off the gas supply after the appliance is install ...

  • Miele KM2030 en-CA - page 11

    Gas pressure regulator A pressure regulator that is convertible from natural to LP gas (Propane) or vice versa is included with the appliance. The included regulator corresponds with the gas type of the appliance. Verify before installing. The adjusted pressure is: natural gas - 4" w.c. LP gas - 10" w.c. a Appliance b ½" NPT c Regul ...

  • Miele KM2030 en-CA - page 12

    The appliance should have been ordered for connection to either natural gas or LP gas (propane). If the appliance is not configured for the proper type of gas connection please contact your Miele Dealer. If the appliance is to be connected to a type of gas other than it was originally configured for, both the regulator and burners must be converted ...

  • Miele KM2030 en-CA - page 13

    Rated load at high setting Burner Type of gas KM 2030 KM 2050 BTU/hr kW BTU/hr kW Small burner Natural gas (NG) Liquid gas (LP) 3500 3500 1,00 1,00 3500 3500 1,00 1,00 Regular burner Natural gas (NG) Liquid gas (LP) 6200 5800 1,80 1,70 6200 5800 1,80 1,70 Power burner Natural gas (NG) Liquid gas (LP) - - - - 8900 8900 2,60 2,60 Wok Natural gas (NG) ...

  • Miele KM2030 en-CA - page 14

    , Switchover to a different gas type should only be performed by a duly authorized gas company technician. Save the nozzles removed from the appliance for future use. Nozzle table If you switch to a different type of gas, the large and small burner nozzles will need to be changed. Main nozzle Ø Low setting nozzle Ø Natural gas (NG) Small burner R ...

  • Miele KM2030 en-CA - page 15

    How to change a nozzle Unplug the appliance from the electrical supply. How to change the main nozzle ^ Remove the burner cover b , the burner ring a (wok) and the burner head c . ^ Use a socket wrench (M7) to unscrew the main nozzle h . ^ Insert the proper nozzles (see Nozzle table) and tighten them down. Small, normal, and power burners Wok burne ...

  • Miele KM2030 en-CA - page 16

    How to change the small nozzles (all burners) To change the small nozzles, you will first need to remove the upper part of the appliance. ^ Unscrew the mounting screws on the burner. ^ Pull the control knob up and off. ^ Take off the upper part of the appliance. ^ Remove the ignition switch a . ^ Use a small screwdriver to unscrew the small nozzle ...

  • Miele KM2030 en-CA - page 17

    After switching over ^ Use the reverse order to re-assemble the burner parts. ^ Before putting the upper part of the appliance back in place, light each burner with matches to test the seal on all the gas flow parts. ^ After testing, set aside the loose burner parts. ^ Put the upper part of the appliance back in place. ^ Screw down the lower part o ...

  • Miele KM2030 en-CA - page 18

    Alteration rights reserved / 4908 For the most updated manual see the Miele web site. M.-Nr. 07 520 080 / 00 ...

Manufacturer Miele Category Welding Consumables

Documents that we receive from a manufacturer of a Miele KM2030 en-CA can be divided into several groups. They are, among others:
- Miele technical drawings
- KM2030 en-CA manuals
- Miele product data sheets
- information booklets
- or energy labels Miele KM2030 en-CA
All of them are important, but the most important information from the point of view of use of the device are in the user manual Miele KM2030 en-CA.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Miele KM2030 en-CA, service manual, brief instructions and user manuals Miele KM2030 en-CA. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Miele KM2030 en-CA.

Similar manuals

A complete manual for the device Miele KM2030 en-CA, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Miele KM2030 en-CA by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Miele KM2030 en-CA.

A complete Miele manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Miele KM2030 en-CA - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Miele KM2030 en-CA, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Miele KM2030 en-CA, that we can find in the current document
3. Tips how to use the basic functions of the device Miele KM2030 en-CA - which should help us in our first steps of using Miele KM2030 en-CA
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Miele KM2030 en-CA
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Miele KM2030 en-CA in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Miele KM2030 en-CA?

Use the form below

If you did not solve your problem by using a manual Miele KM2030 en-CA, ask a question using the form below. If a user had a similar problem with Miele KM2030 en-CA it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)