Manual GE 1018959

24 pages 1.41 mb
Download

Go to site of 24

Summary
  • GE 1018959 - page 1

    GE Digital Energy Power Quality Installation Guide Digital Energy™ SNMP / WEB ADAPTER P/N 1018959 3-ph SNMP/Web plug-in adapter P/N 1019070 1-ph SNMP/Web plug-in adapter P/N 23954 SP SNMP/Web plug-in adapter P/N 1019071 1-ph SNMP/Web external adapter GE Cons umer & In dustrial SA General Electric Company CH – 6595 Riazzino (Locarno) Switzer ...

  • GE 1018959 - page 2

    Model: 3-ph SNMP/Web plug-in adapter 1-ph SNMP/Web plug-in adapter SP SNMP/Web plug-in adapter 1-ph SNMP/Web external adapter Date of issue: 13.05.2008 File name: ISG_CN T_SNM_BAS_CRD_V012 Revision: 1.2 Identification N o. P/N 1018959 P/N 1019070 P/N 23954 P/N 1019071 Up-dating Revision Concerns Date 1.0 First Issue 20.12.2007 1.1 First RELEASED Is ...

  • GE 1018959 - page 3

    Dear Customer , We thank you for selecting our products and are pleased to count you amongst our very valued customers at GE . We trust that the use of the SNMP/Web adapters for our Uninterruptible Power Supply systems, developed and produced to the highest standards of quality, will give you complete satisfaction. Please read carefully the Install ...

  • GE 1018959 - page 4

    Table of contents Page 1 SAFETY RULES ............................................................................................................................... .................. 5 1.1 WARNINGS AND CAUTIONS ............................................................................................................................... ......... ...

  • GE 1018959 - page 5

    1 SAFETY RULES With this document, GE gives to the user all the necessa ry inform ation about the correct insta llation of the SNMP/Web adapters. Please read carefu lly this Instal lation Manual before installing or operating the adapters. We recommend that this manual be kept next to the UPS for future references. If any problems are encountered w ...

  • GE 1018959 - page 6

    1.1 WARNINGS AND CAUTIONS GENERAL • Always strictly observe the “ UPS Sa fety Rules ” • Check carefully the integr ity of the equipment. In case you note some visible damage, do no t install the equipment but contact the nearest Se rvice Centre . • WARNING: RISK OF ELECTR ICAL SHOCK. Do not remove any UPS covers; there are no user service ...

  • GE 1018959 - page 7

    ENVIRONMENT • Please take care of packaging mate rial: either save it for later use or recy cle/dispose in compliance with local and other applicable regulations. • The SNMP/Web adapt ers contain a removab le, Lithiu m coin-c ell bat tery . Dispose of used batteries in compliance with local and other applicable regulations. WARNING ! The UPS co ...

  • GE 1018959 - page 8

    1.2 EMC COMPATIBILITY 1-ph SNMP/Web plug-in adapter (P/N 1019070) 1-ph SNMP/Web external adapter (P/N 1019071) This device has been tested for co mpliance with the following standards: • EN 61000-6-2 • EN 61000-6-3 NOTE: This equipment has been tested and found to comp ly with the limits for a Class B digital device, pursuant to Part 15 of the ...

  • GE 1018959 - page 9

    2 INTRODUCTION 2.1 CHECKING PACKAGE CONT ENTS The SNMP/Web adapters are delivered in d i fferent kits accord ing to the model. 3-ph SNMP/Web plug-in adapter (P/N 1018959) • 3-ph SNMP/Web plug-in adapter, with pre-installed standard front panel • A front panel designed for LP33 Series UPSs • Square plates for older SitePro UPSs • Mounting sc ...

  • GE 1018959 - page 10

    • Third Party License ReadMe • CD-ROM AC ada p ter Serial cable 2.2 OVERVIEW 3-ph SNMP/Web plug-in adapter (P/N 1018959) LP 33 Series UPS SitePro / SG Serie s UPS Reset RS-232 UTP 10/100 Active LAN UPS Reset RS-232 UTP 10/100 Active LAN UPS Reset RS-232 UTP 10/100 Active LAN UPS Reset RS-232 UTP 10/100 Active LAN UPS 4 3 2 1 1 2 3 4 • 1 – R ...

  • GE 1018959 - page 11

    • 1 – RJ45 Connector Ethernet connection, 10Base-T or 100B ase-TX • 2 – LEDs Ref. specific section • 3 – RS-232 port Local console connection (115200-N-8-1) • 4 – Reset b utton HW reset • 5 – RJ11 Connector Contact interface, open-collect or output SP SNMP/Web plug-in adapter (P/N 23954) • 1 – RJ45 Connector Ethernet connect ...

  • GE 1018959 - page 12

    LEDs The various front panel LEDs have the following meaning: • LAN / Netlink Status Meaning Off No LAN connection detected LAN connection establishe d, no communication On LAN connection established, receive or transmit active Blink • UPS / Fail Status Meaning OK / No Fault Off No UPS Connection On • Active Status Meaning Fault of device Off ...

  • GE 1018959 - page 13

    2.5 ADDITIONAL DOCUMENTS The SNMP/Web adapter is provided with a CD-ROM containing the following documentation: • Installation Manual • Operating Manual • SNMP Management Information Base (MIB) • Release notes and other in structions, as applicable Modifications reserv ed Page 13/24 ISG_CNT_SNM_BAS_CRD_1GB_V012.doc Installation Guide SNMP/W ...

  • GE 1018959 - page 14

    3 INSTALLATION NOTE ! Strictly observe the ‘ UPS Safety Rules ’. Read carefully the UPS ‘ Operating Manual & Installation Guide ’ before installing or operating th e equipment. If any problems are encounte red with the installation procedure here described, please contact the nearest Service Centre before proceeding. 3.1 3-PH SNMP/WEB P ...

  • GE 1018959 - page 15

    Modifications reserv ed Page 15/24 ISG_CNT_SNM_BAS_CRD_1GB_V012.doc Installation Guide SNMP/Web Ada pter 3.1.2 Installing the SNMP Card in option slot IMPORTANT: Switch off the UPS, and wait approx. 2 minut es or switch the UPS to the manual bypass. In the latter case, please ensu re that the mains inpu t is reliable during this period. All cables ...

  • GE 1018959 - page 16

    Install procedure for SG Series SGT5000_050-080_UPS_GE_03 Q1 OFF ON Q2 ON OFF 1. Change the front plate with the smaller one delivered with the Kit. 2. Insert the SNMP adapter in the options slot. 3. Fix the front plate of the SNMP adapter to the connectivity box, using the screw include d in the SNMP/Web adapter kit. 3.1.3 Connecting the card Refe ...

  • GE 1018959 - page 17

    • Make all necessary connections (see architecture diagram in section 2.4 ). Contact i /f • Switch on the UPS or go back to normal mode from bypass. 3.3 SP SNMP/WEB PLUG-IN AD APTER (P/N 1019070) • Switch off the UPS, and wait approx. 2 minutes or switch the UPS to the manual bypass. In the latter case, please ensure that the mains input is r ...

  • GE 1018959 - page 18

    • Connect the power to the box (left-most connector in the picture abov e). Make sure that the SNMP/WEB Interface box is powered b y the UPS output! • The UPS / Fail LED will switch OFF once th e connection to the UPS is established. If the LED remains continuously on, chec k the UPS connection and related cabling. 3.5 INTERFACES UTP 10/ 100 ? ...

  • GE 1018959 - page 19

    4 CONFIGURATION 4.1 CONFIGURATION METHODS The SNMP/Web plug-in adapters can be co nfigured using different interfaces. 4.1.1 Configuration via serial connection • Connect the SNMP adapter to a computer using a standard 1:1 serial co mmunication cable. • Run a terminal simulator (e.g. H yperTerminal on a PC running Windows) • Configure the ter ...

  • GE 1018959 - page 20

    NOTE : Although the console interface provides a full set of comman ds, access using the serial connection is only needed for initial configuration when no DHCP server is available, or the IP-address is unknown. The quick network configuration menu pr ovides a simple interface for basic network configuration. For all other settings the us er-friend ...

  • GE 1018959 - page 21

    4.2 NETWORK PARAMETERS The SNMP/Web adapter connects to the ne twork using the foll owing parameters: • IP address identifies the adapter on the network. • Subnet mask defines a range of addresses within the organisation. • Gateway the node used for connection to addresses outside the subnet. The adapter can be configured to obtain these sett ...

  • GE 1018959 - page 22

    5 ACCESS 5.1 WEB INTERFACE After the installation and configuration of the SNMP/Web adapter, th e connection can be tested with a web browser. • Launch the browser • Enter the URL of the SNMP/Web adapter: http://< IP>/ (e.g. http://192.168.24 .14/) • When prompted, enter username and pa ssword (by default, these are set t o ge and ge ) ...

  • GE 1018959 - page 23

    6 CUSTOMER SUPPORT 6.1 FIRST LINE SUPPORT Please contact your local GE distri butor for problems with the ins talla tion of t he product or its use. 6.2 INTERNET On-line support available on requ est (Internet acce ss required). 6.3 WWW SERVER We have a WWW server running at www.gedigitalenergy.com With your favourite web browser yo u can access th ...

  • GE 1018959 - page 24

    7 APPENDIX A SitePro EARTH CONNECTION In order to guarantee correct func tional behaviour, the SNMP/Web plug-in adapter must be connected to protective earth (UPS chassis). On SiteP ro UPSs manufactured before 2003 the square plates (delivered with the 3-ph adapter kit) must be mounted – refer to the pictures below for the installation details. N ...

Manufacturer GE Category Network Card

Documents that we receive from a manufacturer of a GE 1018959 can be divided into several groups. They are, among others:
- GE technical drawings
- 1018959 manuals
- GE product data sheets
- information booklets
- or energy labels GE 1018959
All of them are important, but the most important information from the point of view of use of the device are in the user manual GE 1018959.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals GE 1018959, service manual, brief instructions and user manuals GE 1018959. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product GE 1018959.

Similar manuals

A complete manual for the device GE 1018959, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use GE 1018959 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of GE 1018959.

A complete GE manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual GE 1018959 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the GE 1018959, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the GE 1018959, that we can find in the current document
3. Tips how to use the basic functions of the device GE 1018959 - which should help us in our first steps of using GE 1018959
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with GE 1018959
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of GE 1018959 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning GE 1018959?

Use the form below

If you did not solve your problem by using a manual GE 1018959, ask a question using the form below. If a user had a similar problem with GE 1018959 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)