Manual Xantech DCH4

10 pages 0.3 mb
Download

Go to site of 10

Summary
  • Xantech DCH4 - page 1

    08905107C - 1 - INSTALLATION INSTRUCTIONS DCH4 Doorbell Communicator Hub DESCRIPTION The DCH4 is a Doorbell Communicato r Hub that provides keyless entry control with the MRC88CTL. The DCH4 has the ability to answer and open up to 4 doors or gates from the nearest phone. When combined with the DPC100 and MRC 88CTL, the DCH4 can provide 2 different ...

  • Xantech DCH4 - page 2

    08905107C - 2 - 1. Power supply connection. Be sure to use the included power supply only. 2. C.O. / Phone Line Input. If installing without a C.O. li ne, “*5” must be programmed. 3. Entry Phone Input. 4. Line Out to Phones. Can be connected to an unused li ne / trunk input on a phone system. 5. Door Strike, Relay Contact Output. N.O., COM, N.O ...

  • Xantech DCH4 - page 3

    08905107C - 3 - PROGRAMMING A. Accessing Programming 1. Accessing the Programming Mode with a Security Code Step 1. Come off-hook with any house phone (device) connected to terminals 4 & 5 , LINE OUT TO PHONES . Step 2. Enter * # followed by the 6-digit secu rity code (factory set to 845464 ). Step 3. A double beep will indicate that you have a ...

  • Xantech DCH4 - page 4

    08905107C - 4 - B. Quick Programming Features Enter Digits - then - Memory Location Privacy Number (factory disabled) 0-6 digits (0-9) + #00 Entry phone 1 keyless entry codes (fa ctory disabled) 4-6 digits (0-9) + #11 - #16 * Entry phone 1 one time use keyless entry codes (fac tory disabl ed) 4-6 digits (0-9) + *#11 - *#16 Entry phone 2 keyless ent ...

  • Xantech DCH4 - page 5

    08905107C - 5 - C. Security Code This six digit number can be used to access t he programming mode. The security code has been factory set to 845464 . It is recommended that you change the security code to a personal 6 digit number. To change the security code, access programming (see Programming section A ). Enter six digits 0-9 followed by #47 . ...

  • Xantech DCH4 - page 6

    08905107C - 6 - G. Door Strike Activation Time A single pole double throw relay is available fo r each entry phone (a second set of contacts are available on solder pads only), and each may be programmed with its own “doorstrike” activation time (programmed in seconds). Each time must be 2 di gits (Example: 00 = 1/2 sec.) and is stored in locat ...

  • Xantech DCH4 - page 7

    08905107C - 7 - there is only one entry phone on the DCH4 . Program the DCH4 with “ 0#62 ”(disable entry phone ringing). When the doorbell chimes, picking up a hous e phone will instantly connect the house phone to the entry phone. If the user pre sses the doorbell switch again while their call is either ringing the house phones or while talkin ...

  • Xantech DCH4 - page 8

    08905107C - 8 - OPERATION A. Visitors When a visitor presses the call button (comes off-hook) on the entry phone, the DCH4 will begin ringing the house phones and “Caller ID” information is sent. If a house phone is on a C.O. call, call waiting tones and “Call Waiting Caller ID” information is sent. A Touch Tone “ # ” from the house pho ...

  • Xantech DCH4 - page 9

    08905107C - 9 - D. Privacy Number The privacy number feature is useful for preventing unwanted (prank) entry pho ne calls from visitors. If a privacy number has been programm ed, an off hook entry phone is given 4 seconds of dial tone to allow the visitor to enter the privacy number. If the visitor enters the co rrect privacy number, the DCH4 will ...

  • Xantech DCH4 - page 10

    08905107C - 10 - FCC REQUIREMENTS This equipment complies with Part 68 of the FCC rule s and the requirements ad opted by the ACTA. On the side of this equipment is a label that contains, amo ng other information, a product identi fier in the format US:AAAEQ##TXXXX. If requested, this number must be provided to the telephone company. The REN is use ...

Manufacturer Xantech Category Switch

Documents that we receive from a manufacturer of a Xantech DCH4 can be divided into several groups. They are, among others:
- Xantech technical drawings
- DCH4 manuals
- Xantech product data sheets
- information booklets
- or energy labels Xantech DCH4
All of them are important, but the most important information from the point of view of use of the device are in the user manual Xantech DCH4.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Xantech DCH4, service manual, brief instructions and user manuals Xantech DCH4. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Xantech DCH4.

Similar manuals

A complete manual for the device Xantech DCH4, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Xantech DCH4 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Xantech DCH4.

A complete Xantech manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Xantech DCH4 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Xantech DCH4, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Xantech DCH4, that we can find in the current document
3. Tips how to use the basic functions of the device Xantech DCH4 - which should help us in our first steps of using Xantech DCH4
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Xantech DCH4
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Xantech DCH4 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Xantech DCH4?

Use the form below

If you did not solve your problem by using a manual Xantech DCH4, ask a question using the form below. If a user had a similar problem with Xantech DCH4 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)