English dropdown-ico

Manual Cisco Systems 78-15328-01

1209 pages 9.59 mb
Download

Go to site of 1209

Summary
  • Cisco Systems 78-15328-01 - page 1

    Corporate He adquarters Cisc o Syst ems , Inc . 170 West Ta sman Drive San Jos e, CA 95 134-1706 USA http://www.ci sco.com Tel: 408 526-4000 800 553- NETS (638 7) Fax: 408 526-4100 Catalyst 650 0 Series Sw itc h Command Reference R ele ase 7 .6 Custome r Orde r Numb er: DOC- 78153 28= Text Par t Numb er: 78 -15328 -01 ...

  • Cisco Systems 78-15328-01 - page 2

    THE SPECIFICATIONS AND INFORMATION REG ARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOU T NOTICE. ALL STATEMENT S, INFORMATI ON, AND RECOMMENDA TIONS IN T HIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRES ENTED WITHOUT WARRANTY OF ANY KIND, EXPRE SS OR IMPLIED. USERS MUST TAKE FULL RESPON SIBILITY FOR THEIR AP PLICATION OF ANY PRO ...

  • Cisco Systems 78-15328-01 - page 3

    iii Catalyst 6500 Series Switch Command Reference—Release 7.6 78-15328-01 CONTENTS Preface xx v Audienc e xxv Organi zation xx v Relat ed D ocum ent atio n xxv Conv enti ons xxvi Obtain ing Documentati on xxvii Cisco. com xxv ii Document ation C D-ROM xx vii Orderi ng Documenta t ion xxvii Docu m en ta t ion Fe ed bac k xxviii Obtain ing Technica ...

  • Cisco Systems 78-15328-01 - page 4

    Cont ents iv Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 clea r bo o t sy st em 2-1 2 clea r ca m 2-13 clear ca m no ti fic a tion 2-14 clear channel st atistics 2-15 clea r co n fi g 2-16 clear co nfi g pv la n 2-18 clea r co p s 2-19 clea r co u nt er s 2-21 clea r cr y pt o ke y rsa 2-2 2 clear do t1x con f ig 2-2 ...

  • Cisco Systems 78-15328-01 - page 5

    Content s v Catalyst 6500 Series Switch Command Reference—Release 7.6 78-15328-01 clea r mls cef 2-52 clea r mls ent ry 2-53 clear ml s entry cef adjacency 2-5 5 clear ml s exclude protocol 2-56 clear mls mult icas t st atis tics 2-57 clear ml s nde flow 2-58 clear ml s statis tics 2-59 clear ml s statis tics entry 2-61 clea r mo dule pass wor d ...

  • Cisco Systems 78-15328-01 - page 6

    Cont ents vi Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 clea r se c ur it y acl log fl o w 2-95 clea r se c ur it y acl m ap 2-96 clea r sn m p acc e ss 2-98 clear snmp access- list 2-99 clear sn mp com m unit y 2-10 0 clea r sn m p comm un it y- ext 2-10 1 clea r sn m p gro u p 2-10 2 clear sn mp ifa lia s 2-1 03 c ...

  • Cisco Systems 78-15328-01 - page 7

    Content s vii Catalyst 6500 Series Switch Command Reference—Release 7.6 78-15328-01 clea r vm ps s tati stic s 2-137 clear v tp pruneeligi ble 2 -138 clea r vtp sta tisti cs 2-139 commit 2-140 commit lda 2-142 conf igure 2-143 conf reg 2-145 cont ext 2-147 copy 2-14 9 delet e 2-155 dev 2- 156 dir— ROM moni tor 2-15 7 dir— swi tch 2-158 disa b ...

  • Cisco Systems 78-15328-01 - page 8

    Cont ents viii Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 set 2-194 set acco unting commands 2-195 set acco unting connect 2-196 set acco unting exec 2-197 set acco unting suppres s 2-199 set acco unting system 2-200 set acco unting update 2-202 set ac llog rat elimi t 2-203 set ac lm erge algo 2-2 04 set ac lm erge ...

  • Cisco Systems 78-15328-01 - page 9

    Content s ix Catalyst 6500 Series Switch Command Reference—Release 7.6 78-15328-01 set de fa ult portstat us 2-251 set do t1 q-all-tagge d 2 -252 set do t1 x 2 -253 set en ab lepass 2-256 set err disable-t ime out 2-257 set err ordetection 2-259 set feat ure agg-link - partne r 2-261 set feat ure dot1x-rad i us-kee palive 2-2 62 set feat ure mdg ...

  • Cisco Systems 78-15328-01 - page 10

    Cont ents x Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 set ip ht tp port 2-297 set ip ht tp server 2-298 set ip per mit 2 -299 set ip re direct 2-30 1 set ip ro ute 2-302 set ip unr eac hable 2- 304 set ke rbe ros client s m and atory 2 -305 set kerb eros credenti als forward 2-306 set k erb eros local-r ealm 2-307 ...

  • Cisco Systems 78-15328-01 - page 11

    Content s xi Catalyst 6500 Series Switch Command Reference—Release 7.6 78-15328-01 set mls fl ow 2 -343 set mls nd e 2-345 set mls ra te 2-349 set mls s tati sti cs pr otoc ol 2-350 set mls ve rify 2-351 set m odu le 2 -353 set m odu le nam e 2-355 set m odu le pow er 2-356 set m odu le shu tdo wn 2-357 set m sfc auto state 2- 358 set msmaut osta ...

  • Cisco Systems 78-15328-01 - page 12

    Cont ents xii Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 set p ort gmrp 2-398 set po rt g vrp 2-399 set po rt h ost 2-401 set po rt i nl inepo wer 2-402 set po rt j umb o 2-403 set po rt l 2pro toc ol-t unn el 2-40 4 set po rt l acp -cha nne l 2-406 set po rt m ac ro 2 -408 set po rt m em bers hip 2-411 set po rt n ...

  • Cisco Systems 78-15328-01 - page 13

    Content s xiii Catalyst 6500 Series Switch Command Reference—Release 7.6 78-15328-01 set qo s ac l mac 2-457 set qo s ac l map 2-459 set qo s au toqos 2-461 set qos br idged-microf low-pol icing 2- 462 set qos co s-dscp-map 2 -463 set qo s dr op-thresh ol d 2-464 set qos ds cp-cos-map 2 -466 set qos i pprec-dscp-map 2-467 set qos m ac- cos 2-469 ...

  • Cisco Systems 78-15328-01 - page 14

    Cont ents xiv Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 set se cur ity acl f eat ure ra teli mit 2-5 09 set s ecurity acl ip 2-510 set s ecurity acl ip x 2-516 set s ecurity acl lo g 2-519 set s ecurity acl mac 2-520 set s ecurity acl map 2-522 set snmp 2-524 set sn mp acc ess 2-525 set sn mp acce ss-l ist 2-527 se ...

  • Cisco Systems 78-15328-01 - page 15

    Content s xv Catalyst 6500 Series Switch Command Reference—Release 7.6 78-15328-01 set sp an tree global-d efault 2-570 set s pan tree guard 2-572 set s pan tree hello 2-574 set sp ant ree link -typ e 2-576 set spant ree ma cred uct ion 2-57 7 set span tree maxage 2-57 8 set spant ree mo de 2-580 set spant ree ms t 2-582 set sp ant ree mst c onf ...

  • Cisco Systems 78-15328-01 - page 16

    Cont ents xvi Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 set syst em name 2-624 set syst em supervisor- update 2-625 set sy ste m sw itch mode all ow 2-627 set syst em syslog-dump 2-629 set syst em syslog-fil e 2-630 set ta cac s at temp ts 2 -631 set ta cac s di rect edr eques t 2-632 set ta ca cs key 2-63 3 set ta ...

  • Cisco Systems 78-15328-01 - page 17

    Content s xvii Catalyst 6500 Series Switch Command Reference—Release 7.6 78-15328-01 show boot 2-672 show boot d evice 2-673 show cam 2-6 74 show cam agin gtim e 2-676 show cam coun t 2-677 show cam msfc 2-678 show cam not ifica tion 2-679 show cdp 2-682 show chann el 2-685 show chann el group 2 -690 show chann el hash 2-694 show chann el mac 2-6 ...

  • Cisco Systems 78-15328-01 - page 18

    Cont ents xviii Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 show gvrp statist ics 2-740 show ifi ndex 2 -742 show igmp fl ooding 2-743 show igmp l eave-que ry-type 2-74 4 show igmp mode 2-745 show igmp qu erier informat ion 2-74 6 show igmp ra telimit-in fo 2-74 7 show igmp st atistics 2-748 show imag em ib 2-750 sho ...

  • Cisco Systems 78-15328-01 - page 19

    Content s xix Catalyst 6500 Series Switch Command Reference—Release 7.6 78-15328-01 show mls exc l ude prot ocol 2-806 show mls m ult icast 2-8 07 show mls nde 2-812 show mls net flow-route 2-813 show mls pbr -route 2-8 14 show mls s tat istic s 2-815 show mls v erif y 2-819 show modu le 2-820 sho w mo dulein it 2-823 show msfcau tostate 2-825 sh ...

  • Cisco Systems 78-15328-01 - page 20

    Cont ents xx Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 show port flowcontr ol 2-884 show port inlinep ower 2-886 show port jumbo 2-887 show port l2proto col-tunnel 2-888 show port lacp-cha nnel 2-889 show port mac 2-892 show port mac-addre ss 2-894 show port negoti at ion 2- 896 show port prbs 2-897 show port proto ...

  • Cisco Systems 78-15328-01 - page 21

    Content s xxi Catalyst 6500 Series Switch Command Reference—Release 7.6 78-15328-01 show qos mac- cos 2-949 show qos maps 2-951 show qos pol icer 2-954 show qos pol icy-source 2-95 6 show qos rs vp 2-957 show qos st atistics 2-958 show qo s st atistics expo rt info 2 -960 show qos st atus 2- 961 show radi us 2-962 show rcp 2-964 show res et 2-965 ...

  • Cisco Systems 78-15328-01 - page 22

    Cont ents xxii Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 show snmp ta rget param s 2 -1006 show snmp use r 2-1008 show snmp vi ew 2-1010 show span 2-1012 show spant r ee 2-1014 show spant ree backbonefa st 2-1018 show spant ree blockedpor ts 2-10 19 show span tree bp du-filt er 2-102 1 show spant ree bpdu-guard 2-1 ...

  • Cisco Systems 78-15328-01 - page 23

    Content s xxiii Catalyst 6500 Series Switch Command Reference—Release 7.6 78-15328-01 show top re port 2-1078 show traf fic 2-1080 show trun k 2-108 1 show udl d 2-1084 show user s 2-1086 show ver sion 2-108 7 show vlan 2-1090 show vlan counte rs 2-1 095 show vmps 2-1097 show vmps ma c 2-1099 show vmps st atisti cs 2-1 100 show vmps vla n 2-11 02 ...

  • Cisco Systems 78-15328-01 - page 24

    Cont ents xxiv Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 APPENDI X A Acronyms A-1 I NDEX ...

  • Cisco Systems 78-15328-01 - page 25

    xxv Catalyst 6500 Series Switch Command Reference—Release 7.6 78-15328-01 Preface This pr efa ce d escri b es t he a udie nce, o rganizatio n, an d co nv en tion s o f thi s pu blica ti on an d p rovid es information on how to obtain relate d documentation. Audience This pu bli cat ion is fo r experi ence d network ad mini str ator s who a re r e ...

  • Cisco Systems 78-15328-01 - page 26

    xxvi Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Preface Conv entions • System Message Guid e—Catal yst 6500 Series , Catalyst 4000 F amily , Catalyst 2948G , and Catalyst 2980G Switches • Catalyst 6500 Serie s Sw itch Qu ick Soft ware Configuration Gui de • A TM Software Configuration Guid e and Com mand Re ...

  • Cisco Systems 78-15328-01 - page 27

    xxvii Catalyst 6500 Series Switch Command Reference—Release 7.6 78-15328-01 Pre face Obtaining Docume ntation Notes us e the follo wing con ventio ns: Note Means r eader tak e note . Notes contain helpf ul suggestions or referen ces to material not co vered in the publica tion. Obtaining Documentation Cisco provides several ways to obtain docume ...

  • Cisco Systems 78-15328-01 - page 28

    xxvii i Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Preface Obtain in g Technical Assis ta nce • Nonregiste red Ci sco. co m u ser s can o rd er doc um en tati on th rou gh a l oca l ac count rep re sen tative by calling Ci sco System s Corporate He adquar ters (Cal ifornia , U.S.A.) at 408 526- 7208 or, else where ...

  • Cisco Systems 78-15328-01 - page 29

    xxix Catalyst 6500 Series Switch Command Reference—Release 7.6 78-15328-01 Pre face Ob taining Technical Assistance Technica l Assista nce Ce nter The Cisco T AC is a vai lable to a ll customers wh o need tec hnical assista nce with a Cisco product, technol ogy , or solut ion. T wo levels of support are available: the Cisc o T A C website an d th ...

  • Cisco Systems 78-15328-01 - page 30

    xxx Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Preface Obtainin g Addi ti ona l Publicat io ns and Info rmatio n Obtaining Ad ditional Public ations and In formation Informa tion ab out Cisco pro ducts, tec hn ologie s, and net wor k solutions is available from various onlin e and printe d source s. • The Cisco P ...

  • Cisco Systems 78-15328-01 - page 31

    C HA PTER 1-1 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 1 Command-Line Interface s This chapt er desc ribes the c ommand- line inte rfaces (CL I) av ailab le on the Catal yst 6500 seri es switches and co ntains t hese s ectio ns: • Switch CLI, page 1-1 • R OM Monit or CLI, page 1-13 For inform ation regar ding th ...

  • Cisco Systems 78-15328-01 - page 32

    1-2 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapte r 1 Command-Li ne Int erface s Switch CLI Note EI A/TIA- 232 was known as RS-232 before its accepta nce as a standa rd by the Electron ic Indust ries Alliance and T elecommunic ations Indus try Associat ion. Accessing the Switch CLI Through the C onsole Port (EIA ...

  • Cisco Systems 78-15328-01 - page 33

    1-3 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 1 Command-L in e In terfaces Switch CLI After con ne cting thr ough a T elne t se ssion, yo u see th is di spla y: host% telnet cat6000-1.cisco.com Trying 172.16.44.30 ... Connected to cat6000-1. Operating the Switch CLI This secti on describe s command modes and f ...

  • Cisco Systems 78-15328-01 - page 34

    1-4 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapte r 1 Command-Li ne Int erface s Switch CLI Using the Command-Line Editing Features Catalyst 650 0 seri es swit ch s oft ware i ncl udes an enha nce d e diti ng mode tha t p rovides a set of e dit ing ke y f u nc tions simil ar to th ose of the Emac s ed ito r . Y ...

  • Cisco Systems 78-15328-01 - page 35

    1-5 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 1 Command-L in e In terfaces Switch CLI In the follo wing e xample, when you enter the letter s conf and press the Ta b key , the system pro vides the comp lete comm and: Console> (enable) conf<Tab> Console> (enable) configure If you en ter a se t of ch ...

  • Cisco Systems 78-15328-01 - page 36

    1-6 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapte r 1 Command-Li ne Int erface s Switch CLI Deleti ng Entrie s Perform on e of thes e tasks to delete command e ntries if you make a mistake or chan ge your mi nd: Scrolling Down a Line or a Screen When you use th e help facilit y to l ist the comm ands in a p arti ...

  • Cisco Systems 78-15328-01 - page 37

    1-7 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 1 Command-L in e In terfaces Switch CLI Redisplayi ng the Current Command Line If you ente r a comma nd and the syst em suddenl y sends a message to your scre en, you can recall you r curr ent co mman d line en tr y . T o do so , perf orm this task : Transposing Mi ...

  • Cisco Systems 78-15328-01 - page 38

    1-8 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapte r 1 Command-Li ne Int erface s Switch CLI Using Command Aliases Like regular com mands , alia ses are no t case se nsitive. Ho we ver , unlike regular command s, some aliases cannot be abbreviat ed. See Ta b l e 1 - 2 for a list of switch CLI aliases that cannot ...

  • Cisco Systems 78-15328-01 - page 39

    1-9 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 1 Command-L in e In terfaces Switch CLI Accessing Command He lp T o see a list of top-le vel comma nds and comm and cate gori es, type help i n norma l or pri vileg ed mo de. Context-sensit ive help (usage and synt ax inf orma tio n) for i ndividual c om mands c an ...

  • Cisco Systems 78-15328-01 - page 40

    1-10 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapte r 1 Command-Li ne Int erface s Switch CLI session Tunnel to ATM or Router module set Set commands, use 'set help' for more info show Show commands, use 'show help' for more info slip Attach/detach Serial Line IP interface squeeze Reclaim spac ...

  • Cisco Systems 78-15328-01 - page 41

    1-11 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 1 Command-L in e In terfaces Switch CLI Y ou can designat e ports by entering th e modu le and por t numbe r pairs, separat ed by commas . T o spe cify a rang e of po rts, use a d as h ( -) bet wee n the mo dule n umb er and po rt n umb er p airs . Da she s take p ...

  • Cisco Systems 78-15328-01 - page 42

    1-12 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapte r 1 Command-Li ne Int erface s Switch CLI Using Command Self-Repeat Use the com mand self -r epea t functi on to display matches to all possible keywords if a st ri ng repres ents a unique match. If a unique match is not found, the longest matching string is pro ...

  • Cisco Systems 78-15328-01 - page 43

    1-13 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 1 Command-L in e In terfaces ROM Moni tor CLI ROM Monitor CLI The ROM monitor is a R OM-ba sed prog ram that executes up on platform startup , reset, or when a fatal exception oc curs. Accessing the ROM Monitor CLI The system ente rs R OM-monitor mod e if the swit ...

  • Cisco Systems 78-15328-01 - page 44

    1-14 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapte r 1 Command-Li ne Int erface s ROM Moni to r CLI ...

  • Cisco Systems 78-15328-01 - page 45

    C HA PTER 2-1 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 2 Catalyst 6500 Series Switch and ROM Monitor Commands This chap ter co ntain s an alpha betica l listin g of all switc h and R OM monitor comman ds a v ail abl e on the Catalyst 6500 series switches. For info rmat ion regar ding A T M modu le -rel at ed com ma n ...

  • Cisco Systems 78-15328-01 - page 46

    2-2 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 Cataly st 6500 Series Switch and R OM Monitor Commands alias alias T o set and display command aliase s, use the alias command. alias [ name = value ] Syntax D escr i pti on Defaults Thi s command has no de fa ult set tings. Comma nd T ypes RO M mon itor co mm ...

  • Cisco Systems 78-15328-01 - page 47

    2-3 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s alias k=stack s=set rommon 4 > s PS1=rommon ! > BOOT=bootflash:RTSYNC_llue_11,1;slot0:f1,1; ========================================================================= Relat e d Commands unalias ...

  • Cisco Systems 78-15328-01 - page 48

    2-4 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands boot boot T o b oot up an ext erna l proc es s, use t he boot co mman d. boot [ -x ] [ -v ] [ device : ][ imagename ] Syntax D escr i pti on Defaults Thi s command has no de fa ult set tings. Comma nd T yp ...

  • Cisco Systems 78-15328-01 - page 49

    Chapter 2 Catalyst 6 500 Series Swi tch and ROM M onitor Commands cd 2-5 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 22 cd T o s et the default Fla sh device for the sy stem , use t he cd comm and. cd [[ m/ ] de vice : ] Syntax Descript ion Defaults The de fault Flash device is bootfl ash. Comma nd T ypes Sw itch co mma ...

  • Cisco Systems 78-15328-01 - page 50

    2-6 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear acl lo g clear acllog T o disable A CL log rate limiting, use the cl ear ac llog command. clear ac llog Syntax D escr i pti on This comm and ha s no a rgume nts o r keywords. Defaults Thi s command h ...

  • Cisco Systems 78-15328-01 - page 51

    2-7 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clea r al i as clear alias T o clear th e abbre viated ve rsions of co mmands, us e the clea r alias comm and. clea r alias { name | all } Syntax Descript ion Defaults Thi s command has no de fa ult set ...

  • Cisco Systems 78-15328-01 - page 52

    2-8 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear arp clear arp T o delete a specif ic entry or all entries from the ARP table , use the cl ear arp command. clea r arp [ all | dynamic | perm an ent | sta tic ] { ip_ addr } Syntax D escr i pti on Def ...

  • Cisco Systems 78-15328-01 - page 53

    2-9 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clea r banner m otd clear banner motd T o cl ear the m essag e-o f-t he-da y banne r, use th e clear banner motd command . clear banne r motd Syntax Descript ion This c omm and ha s no a rgume nts o r k ...

  • Cisco Systems 78-15328-01 - page 54

    2-10 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear boot aut o-config clear boot auto-conf ig T o clear the cont ent s of the CONFIG_ FILE envir onmen t vari ab le used to speci fy th e config ura tion f iles used during boo tup, use the cl ear boot ...

  • Cisco Systems 78-15328-01 - page 55

    2-11 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear boot dev ice clear boot device T o clear the conten ts of th e CONFIG _FILE e nvironm ent va riable u sed to speci fy the NAM sta rtup config urati on files used, use the clear boot devic e comma ...

  • Cisco Systems 78-15328-01 - page 56

    2-12 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear boot sy stem clear boot system T o cl ear the con tent s of the B OOT envi ronm en t va ria ble and t he c onf igur ati on re gist er set ting, u se the clear boo t syste m command. clear boot syste ...

  • Cisco Systems 78-15328-01 - page 57

    2-13 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear c am clear cam T o delete a specif ic entry or all entries from the CAM table, use the clea r cam command . clear ca m mac _addr [ vl an ] clear ca m { dyn am ic | sta tic | permanent } [ vl an ] ...

  • Cisco Systems 78-15328-01 - page 58

    2-14 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear cam no tificat io n clear cam notification T o clear th e CAM notif icati on counter s and hi story log, use the cl ear cam notif ication comman d. clear ca m notif ication { all | counters | histor ...

  • Cisco Systems 78-15328-01 - page 59

    2-15 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear channel st atisti cs clear channel sta tistics T o clear P AgP stat istical info rmation, u se the clea r channel statistic s comm and. clear cha nnel statisti cs Syntax Descript ion This c omm a ...

  • Cisco Systems 78-15328-01 - page 60

    2-16 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear conf i g clear config T o clear the system or module conf iguration information store d in NVRAM, use the clear c onf ig comm and. clear co nfi g { mod | rmo n | all | snmpv3 | acl nv r am | int erf ...

  • Cisco Systems 78-15328-01 - page 61

    2-17 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear config This e x ample sho ws how to delete all the conf iguration in formation for the Catal yst 6500 se r ies switch es: Console> (enable) clear config all This command will clear all configu ...

  • Cisco Systems 78-15328-01 - page 62

    2-18 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear conf i g pvlan clear config pvlan T o clear all priv ate VL AN configurat ions in the syst em inclu ding por t mappings, use the clea r con fig pvlan comm and. clear co nfi g pvlan Syntax D escr i p ...

  • Cisco Systems 78-15328-01 - page 63

    2-19 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clea r co ps clear cops T o cl ear Comm on Open Po licy Se rvi ce ( COPS) co nfigurat ions, us e t he c lea r cops comman d. clear co ps roles ro l e 1 [ ro l e 2 ]... clear co ps all-rol e s clear cop ...

  • Cisco Systems 78-15328-01 - page 64

    2-20 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear cops This example shows how to clear al l COPS ser vers: Console> (enable) clear cops server all All COPS servers cleared. Console> (enable) This example shows how to cle ar a sp ecific COPS s ...

  • Cisco Systems 78-15328-01 - page 65

    2-21 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clea r count ers clear counters T o cle ar MAC counters, Ethe rCh annel MAC counters , port count ers , and t he cha nn el tra ffi c perc en tile , use the clea r counters co mmand. clear co unters [ a ...

  • Cisco Systems 78-15328-01 - page 66

    2-22 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear cry pto key rsa clear crypto key rsa T o remov e all RSA public-ke y pairs, use the clea r crypto k ey rsa comm and. clear cry pto k ey rsa Syntax D escr i pti on This comm and has n o keywords or a ...

  • Cisco Systems 78-15328-01 - page 67

    2-23 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear dot1x con fig clear dot1x config T o disable dot1x on all ports and return v alues to the default settings, u se the clear dot 1x conf ig comm and. clear dot 1x conf ig Syntax Descript ion This c ...

  • Cisco Systems 78-15328-01 - page 68

    2-24 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear dot 1x gues t- vlan clear dot1x guest-vlan T o remove any active 802.1 x auto ports from the guest VLAN , u se th e clear dot1x gue st-vl an co mman d. clea r dot1x gu est-vl an Syntax D escr i pti ...

  • Cisco Systems 78-15328-01 - page 69

    2-25 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear gmr p statistics clear gmrp statistics T o clear all the GMRP stati s tics info rma tio n from a specif ied VLAN or all VLANs, use th e clear gm rp statistics command. clear gmr p statisti cs { v ...

  • Cisco Systems 78-15328-01 - page 70

    2-26 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear gvr p stat is ti cs clear gvrp s tatistics T o clear all the GVRP statis tics info rmation , use the clea r gvrp statis tics comma n d. clear g vrp st ati st i cs { mo d/port | all } Syntax D escr i ...

  • Cisco Systems 78-15328-01 - page 71

    2-27 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear i gmp statisti cs clear igmp statistics T o cle ar I GMP snoo pi ng st ati stica l inf orm atio n, use the clear igmp statistics command. clear ig mp stat istics Syntax Descript ion This c omm an ...

  • Cisco Systems 78-15328-01 - page 72

    2-28 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear ip ali as clear ip alias T o clear IP al iases that wer e set using the set ip alias command , use the clear ip alias command . clear ip alias { name | all } Syntax D escr i pti on Defaults Thi s co ...

  • Cisco Systems 78-15328-01 - page 73

    2-29 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear ip dns domain clear ip dns domai n T o clear the de fault DNS domain na me, use the clear ip dns domain command. clear ip dns domain Syntax Descript ion This c omm and ha s no a rgume nts o r key ...

  • Cisco Systems 78-15328-01 - page 74

    2-30 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear ip dn s server clear ip dns server T o remov e a DNS s erver from the DNS serve r listing, use the clear i p dns ser ver command . clear ip dns serv er { ip_ad dr | all } Syntax D escr i pti on Defa ...

  • Cisco Systems 78-15328-01 - page 75

    2-31 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear ip pe rmi t clear ip permit T o remov e a specified IP address and mask or all IP addresses and masks from the permit list, use the clear ip permit comman d. clear ip permit al l clear ip permit ...

  • Cisco Systems 78-15328-01 - page 76

    2-32 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear ip pe rm i t Console> (enable) clear ip permit all IP permit list cleared. WARNING IP permit list is still enabled. Console> (enable) Relat e d Commands set ip permit show ip per mit ...

  • Cisco Systems 78-15328-01 - page 77

    2-33 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear i p route clear ip route T o delete IP routi n g table entries, use the clear ip r oute command. clear ip r oute destination gat eway Syntax Descript ion Defaults The defau lt is destination . If ...

  • Cisco Systems 78-15328-01 - page 78

    2-34 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear kerb eros clie nts m and atory clear kerberos clients ma ndatory T o disable mandatory Kerb eros authentica tion for services on the netw ork, use the clea r kerbe ros clients mandatory comm and. cl ...

  • Cisco Systems 78-15328-01 - page 79

    2-35 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clea r ke rber os cred e nti a ls for w ard clear kerberos creden tials forward T o disa ble credent ials forw arding, use the clear kerber os cr edentials f orward command . clear ke rberos cr edentia ...

  • Cisco Systems 78-15328-01 - page 80

    2-36 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear kerb eros cre ds clear kerberos creds T o de lete all t he Kerb eros cr edentia ls, use t he c lear kerberos creds comm and. clear ke rbero s creds Syntax D escr i pti on This comm and ha s no a rgu ...

  • Cisco Systems 78-15328-01 - page 81

    2-37 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear ker ber os re alm clear kerberos realm T o clear a n entry t hat m aps the nam e of a K erb eros rea lm to a D NS do main name or a hos t na me , use the clea r k er beros rea lm command. clea r ...

  • Cisco Systems 78-15328-01 - page 82

    2-38 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear kerb eros se rv er clear kerberos server T o clea r a s pecifi ed Ke y Distrib ution Cen ter (KDC) entry , use the clear k erber os server co mmand. clear k erb eros s erver ke rberos_realm { host n ...

  • Cisco Systems 78-15328-01 - page 83

    2-39 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clea r key conf i g-k e y clear key config-key T o remo ve a pri vate 3DE S key , use the clea r key con fig-key command. clear ke y conf ig-key string Syntax Descript ion Defaults Thi s command has no ...

  • Cisco Systems 78-15328-01 - page 84

    2-40 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear l2prot ocol- tun nel cos clear l2protoco l-tunnel c os T o cle ar t he L a yer 2 p rotoc ol tunne ling CoS value fo r all i ng ress tu nne ling por ts, use the c lea r l2protocol-tunnel c os command ...

  • Cisco Systems 78-15328-01 - page 85

    2-41 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear l2pr oto c ol- tunn el s t atis t ics clear l2protoco l-tunnel sta tistics T o cl ear Lay er 2 pr ot ocol tu nnel ing stat ist ics on a po rt o r on al l tun ne lin g p orts, u se the c lea r l2p ...

  • Cisco Systems 78-15328-01 - page 86

    2-42 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear lac p-ch annel st ati st i cs clear lacp-channel statistic s T o clea r Link Aggr egation Control Protocol (LA CP) statistical informat ion, use t he clear lacp-channe l statistics command. clear la ...

  • Cisco Systems 78-15328-01 - page 87

    2-43 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear lda clear lda T o remove the ac celerated server lo ad balancin g (ASLB ) MLS entries or MA C addresses from the swit ch, use the cl ear lda comman d. clear lda mls clear lda mls [ destination ip ...

  • Cisco Systems 78-15328-01 - page 88

    2-44 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear lda Usage Guid el i nes This c omm and is suppor ted on ly o n sw itc he s configu red w ith th e Supe r visor En gine 1 wi th L aye r 3 Switching Engine WS-F6K-PFC (Pol icy Feature Card) . Ente rin ...

  • Cisco Systems 78-15328-01 - page 89

    2-45 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clea r lo ca luse r clear localuser T o delete a loca l user a ccount f rom the switch, use the clear localus er command. clear lo caluser name Syntax Descript ion Defaults Thi s command has no de fa u ...

  • Cisco Systems 78-15328-01 - page 90

    2-46 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear log clear log T o delet e module , system error log, or dump l og entri es, use the c lea r log co mmand . clear lo g [ mod ] clear lo g dump Syntax D escr i pti on Defaults Thi s command has no de ...

  • Cisco Systems 78-15328-01 - page 91

    2-47 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear log comma nd clear log comma nd T o clear the command log entry table, u s e t h e clear l o g co mmand comm and. clear lo g command [ mod ] Syntax Descript ion Defaults Thi s command has no de f ...

  • Cisco Systems 78-15328-01 - page 92

    2-48 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear log gi ng buffer clear loggi ng buffer T o clear th e system logg ing bu f f er , use the clea r loggi ng buffe r command . clear lo gging b uffer Syntax D escr i pti on This comm and ha s no a rgum ...

  • Cisco Systems 78-15328-01 - page 93

    2-49 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear loggi ng level clear logging leve l T o reset the logging le vel for a fa cility or for all f acilities to their default settings, use t he clea r logging lev el command. clear logging lev el { f ...

  • Cisco Systems 78-15328-01 - page 94

    2-50 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear log ging leve l Defaults Thi s command has no de fa ult set tings. Comma nd T ypes Sw itch co mman d. Command Mode s Pri vile ged. Exam ples This example shows how to reset a specif ic fa cility bac ...

  • Cisco Systems 78-15328-01 - page 95

    2-51 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear logging server clear logging server T o delete a syslog serve r from the system log serv er table, use the cl ear logg ing ser ver comm and. clear l og gin g server ip_ad dr Syntax Descript ion D ...

  • Cisco Systems 78-15328-01 - page 96

    2-52 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear mls cef clear mls cef T o clear CEF summa ry statisti cs, use the cl ear mls cef com mand. clear mls cef Syntax D escr i pti on This comm and ha s no a rgume nts o r keywords. Defaults Thi s command ...

  • Cisco Systems 78-15328-01 - page 97

    2-53 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clea r ml s ent ry clear mls entry T o clea r MLS entr ies in the Cata lyst 6500 se ries swi tches, use the clea r mls entry co mmand. clear mls entry [ ip | ipx ] all clear mls entry ip destination ip ...

  • Cisco Systems 78-15328-01 - page 98

    2-54 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear mls ent ry Up to 16 routers can be included e xplicitly as MLS-RPs. T o use a rou ter as an MLS, yo u must meet th ese condi tions: • The route r must be in cluded (either e xplicitly or autom ati ...

  • Cisco Systems 78-15328-01 - page 99

    2-55 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear ml s entry cef adjacency clear mls entry ce f adjacenc y T o clear CEF adjacen cy statistics, u se the clear ml s entry cef adj acency co mmand. clear mls entry cef adj acency clear mls entry cef ...

  • Cisco Systems 78-15328-01 - page 100

    2-56 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear mls excl ude pro tocol clear mls exclude protocol T o rem ove a protocol por t that h as been exclu ded from s hortc ut ting u s i ng the set ml s e xclude protocol comm and, use the clear mls exclu ...

  • Cisco Systems 78-15328-01 - page 101

    Chapter 2 Catalyst 6 500 Series Swi tch and ROM M onitor Commands clear mls multicast statistics 2-57 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 22 clear mls multicast statistics T o remov e ML S multicast sta tistics main tained b y th e MSFC on the switc h, use th e clea r mls multicast statistics command. clear mls ...

  • Cisco Systems 78-15328-01 - page 102

    2-58 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear mls nde f low clear mls nde flow T o reset t he NDE f ilters in the Catalyst 6500 series switch es, use t h e clea r mls nde f low command. clear mls nde flo w Syntax D escr i pti on This comm and h ...

  • Cisco Systems 78-15328-01 - page 103

    2-59 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear mls st atistics clear mls statistics T o clear hard wa re-instal led MLS statist ics entri es, use the cl ear mls stat istics co mmand. clear mls statistics clear mls statisti cs prot ocol { prot ...

  • Cisco Systems 78-15328-01 - page 104

    2-60 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear m ls st atistics Relat e d Commands set mls sta tistics protocol show mls statistics ...

  • Cisco Systems 78-15328-01 - page 105

    2-61 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear ml s statist ics entry clear mls statistics en try T o clear statistics for MLS entries, use the clea r mls st atistics entr y command. clear mls statistics entry [ ip | ipx ] al l clear mls stat ...

  • Cisco Systems 78-15328-01 - page 106

    2-62 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear m ls st atistics entry • IPX address— ipx_ne t.ipx_nod e (for exampl e 3.0034.1 245.A B45, A43. 0000.0 000.00 01) Up to 16 routers can be included e xplicitly as MLS-RPs. T o use a rou ter as an ...

  • Cisco Systems 78-15328-01 - page 107

    2-63 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear module password clear module pa ssword T o clear the password set by the password [ usernam e ] N AM command, us e the cl ear m odu le pa sswor d comm and. clear modul e password mod Syntax Descr ...

  • Cisco Systems 78-15328-01 - page 108

    2-64 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear mult i cast route r clear multicast router T o clear manual ly config ured multicast rou ter ports from the multic ast router port list, use the clea r multicast r outer comman d. clear multi cast r ...

  • Cisco Systems 78-15328-01 - page 109

    2-65 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clea r ntp serv er clear ntp server T o r emove o ne or m ore s erver s f rom th e NT P s er ver ta bl e, u s e the c lea r ntp server command. clear ntp ser ver { ip_addr | all } Syntax Descript ion D ...

  • Cisco Systems 78-15328-01 - page 110

    2-66 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear ntp ti mezone clear ntp timezone T o return the time zo ne to its default, UTC, use the clear ntp timezone command. clear ntp ti mezone Syntax D escr i pti on This comm and ha s no a rgume nts o r k ...

  • Cisco Systems 78-15328-01 - page 111

    2-67 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear pbf clear pbf T o remo ve the MA C address for the PFC2, use the clear pbf command. clear pbf Syntax Descript ion This c omm and ha s no keywords or argume nts. Defaults Thi s command has no de f ...

  • Cisco Systems 78-15328-01 - page 112

    2-68 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear pbf -m ap clear pbf-map T o clear PBF map infor mation, use the cl ear p bf-ma p command. clear pbf- map { vlan vlan } | all | { ip_addr_ 1 } { ma c_add r_1 } { vlan_1 } { ip_ad dr_2 } { mac_ addr_2 ...

  • Cisco Systems 78-15328-01 - page 113

    2-69 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear pbf-map This e x ample sho ws how to clea r all adjacency inf o rm ati on and A CLs that wer e creat ed by entering t he set pbf -ma p command: Console> (enable) clear pbf-map all ACL 'PB ...

  • Cisco Systems 78-15328-01 - page 114

    2-70 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear port broa dcast clear port broadca st T o disable broadcast/multicas t suppression on one or more ports, use the clear port br oa dcast comm and. clear port broadcast mod/po rt Syntax D escr i pti o ...

  • Cisco Systems 78-15328-01 - page 115

    2-71 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear po rt cops clear port cops T o clear por t roles, use the clear port cops comman d. clear por t cops mod / port rol e s ro l e 1 [ ro l e 2 ]... clear por t cops mod / port all-r oles Syntax Desc ...

  • Cisco Systems 78-15328-01 - page 116

    2-72 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear port hos t clear port host T o cle ar the port co nfigurati on for opti mizing a hos t connec tion, use the clear port host comm and. clear por t host mod / port Syntax D escr i pti on Defaults Thi ...

  • Cisco Systems 78-15328-01 - page 117

    2-73 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear port qos cos clear port qos cos T o return the v alues set by the set port qos cos command to the def ault settings for all specified ports, use the clea r port qo s cos co mmand. clear por t qos ...

  • Cisco Systems 78-15328-01 - page 118

    2-74 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear port se curity clear port security T o clear al l MA C add r ess es o r a s p eci f ic MA C address fr o m th e lis t of se cu re MA C addresses o n a p o rt, use the clea r port securit y command. ...

  • Cisco Systems 78-15328-01 - page 119

    2-75 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear pvla n mapping clear pvlan mapping T o d ele te a pr ivate VLAN mappi n g, use t h e clear pvlan mapping command. clear pvlan mapping primar y_vlan { isol ated_vl an | commu nity_ vlan | twoway_c ...

  • Cisco Systems 78-15328-01 - page 120

    2-76 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear qos acl clear qos acl T o remo ve v arious A CL conf igurat ions , use the cl ear qos acl command . clea r qos acl acl_name [ editbuf fer_index ] clea r qos acl defaul t-act ion { ip | ipx | mac | a ...

  • Cisco Systems 78-15328-01 - page 121

    2-77 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clea r qos acl This e xample sho ws ho w to det ach an A CL from a specif ic VLAN: Console> (enable) clear qos acl map ftp_acl 4 Hardware programming in progress... ACL ftp_acl is detached from vlan ...

  • Cisco Systems 78-15328-01 - page 122

    2-78 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear qos conf ig clear qos config T o the defau lt settings and delete th e CoS assigned to MAC a d dresses, use the clear q os config co mm an d to return the v alues set by the set qos command . clear ...

  • Cisco Systems 78-15328-01 - page 123

    2-79 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear qos cos-dscp -map clear qos cos-dsc p-map To clear CoS-to-DSCP mappin g set by the set qos cos- dscp-map command and return to the defa ult setting, u se the c lea r qos co s-ds cp-m ap command . ...

  • Cisco Systems 78-15328-01 - page 124

    2-80 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear qos dscp-c os- map clear qos dscp-c os-map To cl ear DS CP-to- CoS mappi ng se t b y the set qo s dscp-c os-m ap command and return to the de fault setting, u se the c lea r qos d scp- cos-m ap comm ...

  • Cisco Systems 78-15328-01 - page 125

    2-81 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clea r qo s ipp rec -d sc p- ma p clear qos ipprec -dscp-map T o reset the m apping set b y the set qos ippr ec-dscp-map command to t h e default set ting, use t he clea r qos ippre c-dscp-map comm and ...

  • Cisco Systems 78-15328-01 - page 126

    2-82 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear qos m ac-c os clear qos mac-c os T o clear the v alues set by the set qos mac-cos command, use the clear qos mac-cos comm and. clea r q o s m a c- co s dest_m ac [ vlan ] clear q o s ma c- co s all ...

  • Cisco Systems 78-15328-01 - page 127

    2-83 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clea r qo s map clear qos map T o return the v alues to the default settin gs, use the clear qos map comm and. clear qos map port_typ e tx | rx Syntax Descript ion Defaults The de fault mapping s for a ...

  • Cisco Systems 78-15328-01 - page 128

    2-84 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear qos m ap Exam ples This example sho w s how to return the values to the de fault settin gs: Console> (enable) clear qos map 2q2t This command will take map values back to factory default. QoS map ...

  • Cisco Systems 78-15328-01 - page 129

    2-85 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clea r qo s pol ic ed -ds c p-ma p clear qos policed -dscp-map T o reset t he police r-t o-dscp map ping tabl e to the defaul ts, use th e clear qos policed-dscp-map . clear qos policed-dscp-map Syntax ...

  • Cisco Systems 78-15328-01 - page 130

    2-86 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear qos pol icer clear qos policer T o clear policin g rules f rom N VRA M, use the clear qos polic er co mmand. clear qos po licer micr oflow micr oflow _name | all clear qo s pol ic er aggreg ate aggr ...

  • Cisco Systems 78-15328-01 - page 131

    2-87 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear qos polic er This exam pl e sh ows how t o clear a specif ic aggre gate policing rule: Console> (enable) clear qos policer aggregate my_micro my_micro QoS microflow policer cleared. Console> ...

  • Cisco Systems 78-15328-01 - page 132

    2-88 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear qos statis ti cs clear qos statistics T o clear QoS stati stic counte rs, use the clear qos sta tistics comm and. clear qos statisti cs [ aggregat e-police r [ polic er_name ]] Syntax D escr i pti o ...

  • Cisco Systems 78-15328-01 - page 133

    2-89 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear radius clear radius T o clear one or all of th e RADI US serv ers fro m the RADI US serv er tab le or r emov e a shared k ey entry , use the clear ra dius comm and. clear r ad iu s server a l l c ...

  • Cisco Systems 78-15328-01 - page 134

    2-90 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear rcp clear rcp T o clear rcp infor mation for f ile transfe rs, use th e clear r cp comman d. clea r rcp Syntax D escr i pti on This comm and ha s no a rgume nts o r keywords. Defaults Thi s command ...

  • Cisco Systems 78-15328-01 - page 135

    2-91 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear r gmp statis tics clear rgmp statistics T o clear RGMP s tatistics informati o n for all VLANs, use the clea r rgmp stat istics co mmand. clear r gmp statisti cs Syntax Descript ion This c omm an ...

  • Cisco Systems 78-15328-01 - page 136

    2-92 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear sec urity acl clear security acl T o remove a specific acces s contr ol entry (ACE) or all ACEs from a VACL and to delete th e VACLs from the edit buf fer , use the clear s ecurity acl command . cle ...

  • Cisco Systems 78-15328-01 - page 137

    2-93 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear securit y acl Usage Guid el i nes Changes you make by enterin g this com mand are saved to NVRA M and hardware only af ter you en ter the commit command. Use the show security acl command to disp ...

  • Cisco Systems 78-15328-01 - page 138

    2-94 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear sec urity acl cap ture-po rts clear security acl captu re-ports T o re move a po rt from the captur e port list, use the clear security a cl capture - ports comman d. clear secur ity acl captur e-po ...

  • Cisco Systems 78-15328-01 - page 139

    2-95 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear securit y acl log f low clear security acl log flo w T o clea r all f lows in the security A CL log tabl e, use the c lear security ac l log flo w command . clear s ecurity ac l log flow Syntax D ...

  • Cisco Systems 78-15328-01 - page 140

    2-96 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear sec urity acl m ap clear security acl map T o re move VAC L-to-VLAN mapping, use the clear securit y acl map comm and. clear s ecurity ac l map a cl_name vlan clear s ecurity ac l map { acl_n ame | ...

  • Cisco Systems 78-15328-01 - page 141

    2-97 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear security acl map This e xample shows how to rem ov e all VACL-to-VLAN m appings fr om a specif ic VLAN: Console> (enable) clear security acl map 5 Map deletion in progress. Successfully cleare ...

  • Cisco Systems 78-15328-01 - page 142

    2-98 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear snm p access clear snmp access T o remove the acce ss rights of an SNMP gro up, use the clear sn mp acce ss comma n d. clear s nmp access [ -hex ] { gr oup name } { sec urit y-mo del { v1 | v2c }} c ...

  • Cisco Systems 78-15328-01 - page 143

    2-99 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear snmp access-l ist clear snmp acces s-list T o clear the IP ad dress of a host that is ass ociated with an access lis t number , use the clea r s nm p access-list command. clear sn mp access-lis t ...

  • Cisco Systems 78-15328-01 - page 144

    2-100 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear snm p commu nity clear snmp communit y T o clear an SNMP co mmunity table, use the clear s nmp community command. clear snmp community inde x [ -he x ] { in dex_name } Syntax D escr i pti on Defaul ...

  • Cisco Systems 78-15328-01 - page 145

    2-101 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clea r snmp commun ity-ext clear snmp communit y-ex t T o clea r an e xisting commun ity strin g, use the clear s nmp com mu nity-e xt comman d. clear snmp communit y-ext community _string Syntax Desc ...

  • Cisco Systems 78-15328-01 - page 146

    2-102 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear snm p group clear snmp grou p T o remo ve the SNMP user fr om an SNMP grou p, use the clea r snm p group co mmand . clear s nmp group [ -hex ] gr oupn ame { user [ -h ex ] userna me } { security -m ...

  • Cisco Systems 78-15328-01 - page 147

    2-103 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear snmp ifalias clear snmp i falias T o clea r an SN MP interf ace alias, u se th e clear snmp if alias comm and. clear snmp ifalias { ifin dex | all } Syntax Descript ion Defaults Thi s command ha ...

  • Cisco Systems 78-15328-01 - page 148

    2-104 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear snm p notify clear snmp notify T o clear the SNMP notify name in the snmpNotifyT able, use the clear snmp notify co mmand. clear s nmp notify [ -h ex ] { notifyname } Syntax D escr i pti on Default ...

  • Cisco Systems 78-15328-01 - page 149

    2-105 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear snmp targe taddr clear snmp targetadd r T o clear the SNMP tar get address entr y in the T arge tAddressT able, use the clear snmp tar getaddr comm and. clear snmp tar g etaddr [ -he x ] { addrn ...

  • Cisco Systems 78-15328-01 - page 150

    2-106 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear snm p target par ams clear snmp targ etparams T o clear the SNMP tar get parameter s used in the snmp T argetP aramsT able, use the clea r snmp target par am s com mand . clear snmp tar g etparams ...

  • Cisco Systems 78-15328-01 - page 151

    2-107 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear snmp trap clear snmp t rap T o cle ar an en tr y from th e SNMP trap re ceiver table, use t he clea r sn mp tra p command. clear sn mp trap { r cvr_ad dr } [ all ] Syntax Descript ion Defaults T ...

  • Cisco Systems 78-15328-01 - page 152

    2-108 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear snm p user clear snmp us er T o remo ve an SN MP user , use the c lear snmp user comman d. clear sn mp user [ -he x ] { username } [ re m ot e engine id ] Syntax D escr i pti on Defaults If a remot ...

  • Cisco Systems 78-15328-01 - page 153

    2-109 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clea r sn m p view clear snmp vi ew T o remo ve the MI B view en try from the v acmV ie wT reeF amilyT able, use the clea r snmp view comm and. clear sn mp view [ -hex ] { vie wname subtr e e } Syntax ...

  • Cisco Systems 78-15328-01 - page 154

    2-110 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear spa ntree d ete cted-p rot ocols clear spantree detec ted-protoco ls T o det ec t legacy brid ges a nd the bound ar y por ts of the MS T r egion, use the clear spa ntr ee dete cted-pr otoc ols com ...

  • Cisco Systems 78-15328-01 - page 155

    2-111 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clea r s pa ntr e e m s t clear spantree mst T o clear the map ping of VLA Ns to an MST instanc e, use the clea r spantr ee mst co mman d. clear s pantr ee mst instance [ vlan vl an s ] Syntax Descrip ...

  • Cisco Systems 78-15328-01 - page 156

    2-112 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear spa ntree p ort cost clear spantree portc ost T o clear th e port cost o f a port on the switc h, use the clea r spant ree por tcos t comm and. clea r s pa ntr ee po rt c ost mod/po rt [ mst ] Synt ...

  • Cisco Systems 78-15328-01 - page 157

    2-113 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear span tree portinstan cecost clear spantree porti nstanceco st T o restore the def ault path cost to an instance on a port, use the clear s pantr ee portinstancecos t comm and. clear s pantree po ...

  • Cisco Systems 78-15328-01 - page 158

    2-114 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear spa ntree p ort instance cost Relat e d Commands set spant ree po rtinstance cost show spantr ee statistics ...

  • Cisco Systems 78-15328-01 - page 159

    2-115 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear spantree po rtinstancepri clear spantree porti nstancepri T o restore the def ault path cost to an instance on a port, use the clear s pantr ee portinstan cepri comm and. clear sp antr ee portin ...

  • Cisco Systems 78-15328-01 - page 160

    2-116 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear spa ntree p ort pri clear spantree portp ri T o clear the port priority of a port on the switch, use the clear sp antr ee portpri comm and. clear sp antr ee portpri mod/port [ mst ] Syntax D escr i ...

  • Cisco Systems 78-15328-01 - page 161

    2-117 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear sp an tre e por tvla nco st clear spantree portv lancost T o restore the def ault path cost to a VLAN on a port, use the clear span tree port vlanc ost command . clear sp a ntr ee p ort vlan cos ...

  • Cisco Systems 78-15328-01 - page 162

    2-118 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear spa ntree p ortvlanc ost Usage Guid el i nes This command is valid in PVST+ mode only . If you do not spe cify a VL AN, a ll V LAN s ar e cle are d. Exam ples These e xampl es sho w ho w to resto r ...

  • Cisco Systems 78-15328-01 - page 163

    2-119 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear sp an tre e por tvla npr i clear spantree portv lanpri T o reset the spanning tree port VLAN prior ity , use the clear spantr ee portvlanpri comm and. clear s pantr ee portvl anpri mod/port [ vl ...

  • Cisco Systems 78-15328-01 - page 164

    2-120 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear spa ntree ro ot clear spantree root T o resto re the spann ing tree bridge priori ty, hel lo time , maxa ge, and forw ard de lay on t he swit ch to their default valu es, use the clea r spantr ee r ...

  • Cisco Systems 78-15328-01 - page 165

    2-121 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear spantree r oot This e xample sho ws ho w to clear th e spanning tr ee root on an instance: Console> (enable) clear spantree root mistp-instance 1 Instance 1 bridge priority set to 32768. Inst ...

  • Cisco Systems 78-15328-01 - page 166

    2-122 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear spa ntree sta tistics clear spantree statistic s T o clear the s panning tree stat istics, use the clear s pant ree statis tics command. clear s pantr ee statistics mod/port clear s pantr ee statis ...

  • Cisco Systems 78-15328-01 - page 167

    2-123 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear sp antree stati stics This e x ample sho ws how to clea r the spannin g tree statis tics for an MST instan ce: Console> (enable) clear spantree statistics mst 0 Statistics cleared for MST ins ...

  • Cisco Systems 78-15328-01 - page 168

    2-124 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear spa ntree u pli nk fast clear spantree uplink fast T o turn of f the Uplin kF ast feature and to return the switc h priority and port co sts to the def ault setti n gs, use the clea r spantr ee upl ...

  • Cisco Systems 78-15328-01 - page 169

    2-125 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear ta cacs key clear tacacs key T o remov e the ke y setting used for T A CACS+ authen tication and encryption, use the clear ta cacs key comm and. clear ta cacs k ey Syntax Descript ion This c omm ...

  • Cisco Systems 78-15328-01 - page 170

    2-126 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear tac acs se rve r clear tacacs serv er T o remo ve a host fr om the lis t of T A CA CS+ serv ers, use the clea r taca cs server comma nd. clear ta cacs ser ver ip_addr Syntax D escr i pti on Default ...

  • Cisco Systems 78-15328-01 - page 171

    2-127 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear timezone clear timezone T o return the time zo ne to its default, UTC, use the clear t imezone command . clear time zone Syntax Descript ion This c omm and ha s no a rgume nts o r keywords. Defa ...

  • Cisco Systems 78-15328-01 - page 172

    2-128 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear top clear top T o sto p the T opN process, us e th e clea r top command . clear to p { all | r e port_nu m } Syntax D escr i pti on Defaults Thi s command has no de fa ult set tings. Comma nd T ype ...

  • Cisco Systems 78-15328-01 - page 173

    2-129 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clea r tr un k clear trunk T o restore a trunk port to its defa u lt trunk type and mode or to clear specif ic VLANs from the allo wed VLAN list for a trunk port , use the clear trunk comman d. clear ...

  • Cisco Systems 78-15328-01 - page 174

    2-130 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear vl an clear vlan T o delete an ex isting VLAN from a manage ment domain or to clear VLANs that are secured b y a Fire wall Ser vices Module, use the cl ear vlan comm and. clea r vlan vlans clea r v ...

  • Cisco Systems 78-15328-01 - page 175

    2-131 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s cle ar v lan Relat e d Commands set vlan show vlan ...

  • Cisco Systems 78-15328-01 - page 176

    2-132 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear vl an co unters clear vlan counte rs T o retu rn the soft ware- cache d counte rs to 0 for all VLANs, use the clear vl an co unte rs co mman d. clear vl an counters { vlans | all } Syntax D escr i ...

  • Cisco Systems 78-15328-01 - page 177

    2-133 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear vla n mapping clear vlan mapping T o delet e existing IEE E 802.1 Q VLAN-to- ISL VLAN mapping s or reserved-t o-nonre served VLAN mappin g, use the clear vlan mapping command. clear vlan mapping ...

  • Cisco Systems 78-15328-01 - page 178

    2-134 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear vl an mappi ng Relat e d Commands set vlan show vlan ...

  • Cisco Systems 78-15328-01 - page 179

    2-135 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear vmps r cp clear vmps rcp T o delete the VMPS rcp username from the VMPS serv er table, use the clear vmps rcp command. clear vmps r cp username Syntax Descript ion Defaults Thi s command has no ...

  • Cisco Systems 78-15328-01 - page 180

    2-136 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear vm p s serv er clear vmps server T o de lete a VMP S server from th e VMP S serv er table, u se the clea r vmps serv er command. clear vmps serv er ip_addr Syntax D escr i pti on Defaults Thi s com ...

  • Cisco Systems 78-15328-01 - page 181

    2-137 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear vmp s statisti cs clear vmps statistics T o delete e xisting VMPS statistics, use the clear vmps statisti cs command . clear vmps s tatistics Syntax Descript ion This c omm and ha s no a rgume n ...

  • Cisco Systems 78-15328-01 - page 182

    2-138 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear vt p pru neeli gib le clear vtp pruneeligibl e T o specify which VLANs in the VTP domain are ine ligible f or pruning, use th e clear vt p pr unee ligible command . clear vtp pruneeligible vlans... ...

  • Cisco Systems 78-15328-01 - page 183

    Chapter 2 Catalyst 6 500 Series Swi tch and ROM M onitor Commands clear vtp statistics 2-139 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 2 clear vtp statistics T o delete VTP statistics, u se the clear v tp stat istics comman d. clear vt p statistic s Syntax Descript ion This c omm and ha s no a rgume nts o r keywords. ...

  • Cisco Systems 78-15328-01 - page 184

    2-140 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands commit commit T o commit al l A CEs or a specif ic A CE in NVRAM that has not been written to hardw are, use the commit comm an d. commit qos acl { acl_ name | all | adjacency } commit se curity a cl { a ...

  • Cisco Systems 78-15328-01 - page 185

    2-141 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s comm it Relat e d Commands ro llback ...

  • Cisco Systems 78-15328-01 - page 186

    2-142 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands commit lda commit lda T o commit ASL B confi g uration that h as not bee n written to h ardwar e to NVRAM, use the commit lda comm and. commit lda Syntax D escr i pti on This comm and ha s no a rgume nts ...

  • Cisco Systems 78-15328-01 - page 187

    2-143 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s configu r e configure T o download a c onfiguration file from an rcp se rver or the networ k and execute each c omman d in that fi le, use the conf igure comman d. conf igure { host f ile }[ rcp ] con ...

  • Cisco Systems 78-15328-01 - page 188

    2-144 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands configu re Wed May 19 1999, 17:42:50 >> set ip alias conc7 198.133.219.207 IP alias added. >> set ip alias montreux 198.133.219.40 IP alias added. >> set ip alias cres 192.122.174.42 IP ...

  • Cisco Systems 78-15328-01 - page 189

    2-145 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s confr eg confreg T o conf ig ure the config uration reg ister utility , use the confr eg co mmand. confreg [ num ] Syntax Descript ion Defaults Thi s command has no de fa ult set tings. Comma nd T ype ...

  • Cisco Systems 78-15328-01 - page 190

    2-146 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands confreg enter to boot: 0 = ROM Monitor 1 = the boot helper image 2-15 = boot system [0]: 0 Configuration Summary enabled are: diagnostic mode console baud: 9600 boot: the ROM Monitor do you wish to chang ...

  • Cisco Systems 78-15328-01 - page 191

    2-147 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s cont ext context T o di splay the con text of a l oade d im age, use the contex t command. cont ext Syntax Descript ion This c omm and ha s no a rgume nts o r keywords. Defaults Thi s command has no d ...

  • Cisco Systems 78-15328-01 - page 192

    2-148 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands context a0 : 00000000 00000400 | s4 : 00000000 0000000f a1 : 00000000 60276c58 | s5 : ffffffff ffffffff a2 : 00000000 00000074 | s6 : 00000000 60276c58 a3 : 00000000 00000000 | s7 : 00000000 0000000a t0 ...

  • Cisco Systems 78-15328-01 - page 193

    2-149 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s copy copy T o uploa d or download a Flash ima ge or a s wit ch configur at ion to or fro m a Flas h device, rcp server , or TFTP se rver, use t he copy comm and. copy fi le - i d { tftp | rc p | flas ...

  • Cisco Systems 78-15328-01 - page 194

    2-150 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands copy Comma nd T ypes Sw itch co mman d. Command Mode s Pri vile ged. Usage Guid el i nes Use the copy comm and t o perf or m th ese ta sks: • Do wnload a sys tem ima ge or conf iguration file from a TF ...

  • Cisco Systems 78-15328-01 - page 195

    2-151 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s copy Exam ples Th is exampl e sh ows how to use t he copy command to upload t he switch c o nfig uration to a f ile named cat.cfg o n the sl ot0 Fl ash device: Console> (enable) copy config slot0:c ...

  • Cisco Systems 78-15328-01 - page 196

    2-152 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands copy Console> (enable) copy tftp config IP address or name of remote host? 172.20.22.7 Name of configuration file? cat.cfg Configure using cat.cfg from 172.20.22.7 (y/n) [n]? y / Finished network down ...

  • Cisco Systems 78-15328-01 - page 197

    2-153 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s copy This example shows ho w t o configure a Cata lyst 6500 seri es switc h using a configurat ion file downloaded fr om an rc p se rver: Console> (enable) copy rcp config IP address or name of rem ...

  • Cisco Systems 78-15328-01 - page 198

    2-154 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands copy Relat e d Commands conf igure set boot config-r egister set boot co nfig-register aut o-config write ...

  • Cisco Systems 78-15328-01 - page 199

    2-155 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s delete delete T o delete a conf iguration f ile, use the del ete comm and. delete [[ m/ ] device : ] file n a me Syntax Descript ion Defaults Thi s command has no de fa ult set tings. Comma nd T ypes ...

  • Cisco Systems 78-15328-01 - page 200

    2-156 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands dev dev T o list t he de vice IDs av ailable on a switch, use the de v command. dev Syntax D escr i pti on This comm and ha s no a rgume nts o r keywords. Defaults Thi s command has no de fa ult set ting ...

  • Cisco Systems 78-15328-01 - page 201

    2-157 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s dir—RO M monit or dir—ROM monitor T o list the files of the name d device, use the dir comman d. dir de vice Syntax Descript ion Defaults Thi s command has no de fa ult set tings. Comma nd T ypes ...

  • Cisco Systems 78-15328-01 - page 202

    2-158 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands dir—swit c h dir—switch T o display a list of f iles on a Flash memory dev ice, use the dir command. dir [[ m/ ] device : ][ f ilename ] [ all | deleted | lo ng ] Syntax D escr i pti on Defaults Thi ...

  • Cisco Systems 78-15328-01 - page 203

    2-159 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s dir—switch Exam ples This example sho ws how to display the file infor mation in short format: Console> (enable) dir -#- -length- -----date/time------ name 1 6061822 Mar 03 2000 15:42:49 cat6000- ...

  • Cisco Systems 78-15328-01 - page 204

    2-160 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands disabl e disable T o re turn t o n orma l mo de from p rivileged mo de, use the disable comman d. disable Syntax D escr i pti on This comm and ha s no a rgume nts o r keywords. Defaults Thi s command has ...

  • Cisco Systems 78-15328-01 - page 205

    Chapter 2 Catalyst 6 500 Series Swi tch and ROM M onitor Commands discon nect 2-161 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 22 disconn ect T o clo se an ac tive console po rt or T elnet se ssion, use the di sconnect command . disconnect { ip_addr | console } Syntax Descript ion Defaults Thi s command has no de fa ul ...

  • Cisco Systems 78-15328-01 - page 206

    2-162 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands downlo ad down load T o copy a software im age from a specified host to the Flash me mory of a designate d module , use the download command. download host f ile [ mod ] [ rc p ] download serial download ...

  • Cisco Systems 78-15328-01 - page 207

    2-163 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s download The download seri al comm and uses Kermit through th e serial EI A/TIA -232 conso le port. The download serial co mman d is not allowed from a T elne t session. Befo re you can e xec ute the ...

  • Cisco Systems 78-15328-01 - page 208

    2-164 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands downlo ad This sam ple sessio n shows how to connect to a re mo te termi nal fr om a Su n workstatio n and h ow to use the do wnl oad seri al comm and to copy a software im age to th e supervi sor engi n ...

  • Cisco Systems 78-15328-01 - page 209

    2-165 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s download This example shows ho w to upgrade the EPLD ima ge in force mod e on the modu le in slot 5: Console> (enable) download epld aq_cr128_art.bin 5 force CCCCCC Device found requiring upgrade i ...

  • Cisco Systems 78-15328-01 - page 210

    2-166 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands enable enable T o ac tivate privileged mo de, u se the enable com ma nd. I n p rivileged mo de , ad di tio na l c omm ands ar e av ailable, and cer tain comman ds disp lay additi onal informa tion. enab ...

  • Cisco Systems 78-15328-01 - page 211

    Chapter 2 Catalyst 6 500 Series Swi tch and ROM M onitor Commands format 2-167 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 22 format T o fo rmat boo tflas h or a Fl ash PC ca rd (a Flash d evice must be fo rmat ted be fore it ca n be u sed), u se the fo r m a t command. fo r m a t [ spare spare-num ] [ m/ ] device1 : [[ ...

  • Cisco Systems 78-15328-01 - page 212

    2-168 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands format Y ou can al so specify device1 : monlib-f ilename as the device and filename to be u sed, as fo llows: format device1: [ device 1 : [ monlib-fil ename ]] If monlib-f ilename is omitt ed, the sy st ...

  • Cisco Systems 78-15328-01 - page 213

    2-169 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s fram e frame T o displ ay an individual stac k fram e, use the fr ame command. frame [ -d | -p ] [ num ] Syntax Descript ion Defaults The de fault is a boot ed image kernel con text, which is the youn ...

  • Cisco Systems 78-15328-01 - page 214

    2-170 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands fsck fsck T o che ck a Flas h file s yst em f or da mage and t o repa ir any pr oble ms, u se t he fsck comman d. fsck [ m / ] devi ce : [ auto matic ] Syntax D escr i pti on Defaults Thi s command has n ...

  • Cisco Systems 78-15328-01 - page 215

    2-171 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s fsc k Ente r th e dir command ag ain to see that the co rrupted f ile is corrected : Console> (enable) dir disk0: 3 -rw- 556 Mar 06 2049 16:26:16 t1 4 -rw- 556 Mar 06 2049 16:26:16 t2 5 -rw- 556 Ma ...

  • Cisco Systems 78-15328-01 - page 216

    2-172 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands histor y—ROM mon it or history—ROM monitor T o displ ay the co mman d history (th e last 16 co mman ds executed in the ROM monitor e n vironment ), use the history co mmand . This comman d is alia se ...

  • Cisco Systems 78-15328-01 - page 217

    2-173 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s history—swi tch history—switch T o s how the co nt en ts of t he co mma nd hist ory buffer , use th e history command. history Syntax Descript ion This c omm and ha s no a rgume nts o r keywords. ...

  • Cisco Systems 78-15328-01 - page 218

    2-174 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands l2tra ce l2trace T o displa y the Layer 2 path taken by th e packe ts that sta rt at a specif ied sourc e address and end at a specif ied d estination address, us e the l2trace command . l2trace sr c_m a ...

  • Cisco Systems 78-15328-01 - page 219

    2-175 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s l2trace The Lay er 2 trace feature is not sup ported when multiple de vices ar e attached to one po rt throug h hubs (for exa mple, multiple CDP neighbors detected on a port). When more than one CDP n ...

  • Cisco Systems 78-15328-01 - page 220

    2-176 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands l2tra ce This examp le shows how to display a su mmary of Layer 2 p acket pa th informa tion f or a specified sour ce and destin ation MAC address: Console> (enable) l2trace 00-01-22-33-44-55 10-22-33 ...

  • Cisco Systems 78-15328-01 - page 221

    2-177 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s meminfo meminfo T o display informat io n about the main memory , p acket memory , and NVRAM, use the me min fo command. W ith the -l opti on, t he s uppo rt ed D RAM c on figurati ons ar e displ aye ...

  • Cisco Systems 78-15328-01 - page 222

    2-178 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands ping ping T o s end I CM P e ch o-req ue st pa cket s to an othe r nod e on t he n etwor k, use t he ping command . Y ou can also us e th e ping com mand w it hout argument s to c onfigure pi ng. ping -s ...

  • Cisco Systems 78-15328-01 - page 223

    2-179 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s ping The guide lines for th e ping -s command are as fo llows: • The maximum w aiting time befor e timing out is 2 seconds. • A new ping packet is gen erated a fter 1 secon d of send ing the previ ...

  • Cisco Systems 78-15328-01 - page 224

    2-180 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands ping 64 bytes from elvis: icmp_seq=4. time=11 ms 64 bytes from elvis: icmp_seq=5. time=7 ms 64 bytes from elvis: icmp_seq=6. time=7 ms ^C ----elvis PING Statistics---- 7 packets transmitted, 7 packets re ...

  • Cisco Systems 78-15328-01 - page 225

    Chapter 2 Catalyst 6 500 Series Swi tch and ROM M onitor Commands pwd 2-181 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 22 pwd T o show the cu rrent sett ing of the cd command, use the pwd comm and. pwd [[ m/ ] devic e : ] Syntax Descript ion Defaults If no m odule num be r o r device i s spec ified, pwd defaul ts to th ...

  • Cisco Systems 78-15328-01 - page 226

    2-182 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands quit quit T o exit a CLI session, use the quit comm and. quit Syntax D escr i pti on This comm and ha s no a rgume nts o r keywords. Defaults Thi s command has no de fa ult set tings. Comma nd T ypes Sw ...

  • Cisco Systems 78-15328-01 - page 227

    2-183 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s reconfi rm vmps reconfirm vmps T o reconf irm the curr ent dynam ic port VLA N members hip assign ments with the VMPS s erv er , use the reconf irm vmps comm and. reconf irm vmps Syntax Descript ion T ...

  • Cisco Systems 78-15328-01 - page 228

    2-184 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands reload reload T o force a module to acc ept a do wnload through SCP , use the reload comm and. Th is com mand rese ts the module and prompt s you to initia te a download when th e reset is com plete. rel ...

  • Cisco Systems 78-15328-01 - page 229

    2-185 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s repeat repeat T o repeat a com mand, use the repe a t command . rep e a t [ num | string ] Syntax Descript ion Defaults If no argu ment is specifie d, th e last command is repeated. Comma nd T ypes RO ...

  • Cisco Systems 78-15328-01 - page 230

    2-186 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands repeat rommon 23 > repeat dir dir bootflash: File size Checksum File name 1973032 bytes (0x1e1b28) 0xdadf5e24 llue rommon 24 > repeat dir bootflash: File size Checksum File name 1973032 bytes (0x1e ...

  • Cisco Systems 78-15328-01 - page 231

    2-187 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s reset—ROM moni tor reset—ROM monitor T o perf orm a soft re set of t he swi tch, use the res et ROM monit or c om mand. res e t [- s ] Syntax Descript ion Defaults The defaul t Flash device is slo ...

  • Cisco Systems 78-15328-01 - page 232

    2-188 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands reset—s witch reset—switch T o restart the system or an ind ividual module, schedule a system reset, or cancel a sche duled reset, use the res et command. res e t [ mo d | system | mindown ] res e t ...

  • Cisco Systems 78-15328-01 - page 233

    2-189 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s reset—switch Y ou can use the rese t min down command to reset the switch as part of a minimal do wntime software upgrade in a system with a redundant supervi sor engine . For complet e inform ation ...

  • Cisco Systems 78-15328-01 - page 234

    2-190 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands reset—s witch This e xample sho ws ho w to schedule a reset with minim um downtim e for a specif ic futur e time and includ e a reaso n for the reset: Console> (enable) reset mindown at 23:00 3/15 S ...

  • Cisco Systems 78-15328-01 - page 235

    Chapter 2 Catalyst 6 500 Series Swi tch and ROM M onitor Commands rest ore co un te rs 2-191 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 2F2 restore counters T o rest ore MA C and port co unters, use the re stor e counters command. restore cou nters [ al l | mod/port s ] Syntax Descript ion Defaults Thi s command has no ...

  • Cisco Systems 78-15328-01 - page 236

    2-192 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands rollbac k rollback T o clear chan ges made to the A C L edit buf fer since its last sa ve, use the r ollback command . The A CL is rolled back to its state at the last commit command. rollba ck qos acl { ...

  • Cisco Systems 78-15328-01 - page 237

    2-193 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s session session T o open a se ssion with a mod ule (for e xample, the MSM, N AM, or A TM) , use the session comman d. This comm and all ows you to use the modul e-speci fic CLI. session mod Syntax Des ...

  • Cisco Systems 78-15328-01 - page 238

    2-194 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set set T o display all of the R OM monitor va r iable names with their v alues, use the set comman d. set Syntax D escr i pti on This comm and ha s no a rgume nts o r keywords. Defaults Thi s command ha ...

  • Cisco Systems 78-15328-01 - page 239

    2-195 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set ac cou nt in g co mm an ds set accountin g commands T o en able comm and ev ent acco unting on t he swit ch, use the set accounting commands comm and. set accounting commands enable { con fig | en ...

  • Cisco Systems 78-15328-01 - page 240

    2-196 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set acco unt ing con nec t set accountin g connect T o ena ble a cco unti ng of o utbou nd co nne ctio n events on t h e switc h, use the set accounting co nnect comm and. set accounting connect enable { ...

  • Cisco Systems 78-15328-01 - page 241

    2-197 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set accou nting ex ec set accountin g exec T o enabl e account ing of norm al logi n sessions on th e switch, use the se t acco untin g exec comman d. set ac countin g exec enable { start-sto p | sto ...

  • Cisco Systems 78-15328-01 - page 242

    2-198 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set acco unt ing exe c Relat e d Commands set accounting commands set accounting connect set accounting suppress set accounting syste m set accounting update set radius key set r adi us s erver set ta ca ...

  • Cisco Systems 78-15328-01 - page 243

    2-199 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set account ing suppress set accountin g suppress T o ena ble o r di sab le supp ressi on of a ccou nti ng infor mat ion for a u ser w ho h as logg ed in wit ho ut a user name , use the set accounting ...

  • Cisco Systems 78-15328-01 - page 244

    2-200 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set acco untin g sy stem set accountin g system T o enable acc ounting of system e ve nts on the switch, use the set ac count ing system command . set accounting syste m enable { sta rt-stop | st op-only ...

  • Cisco Systems 78-15328-01 - page 245

    2-201 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set accounti ng system Relat e d Commands set accounting commands set accounting connect set ac countin g exec set accounting suppress set accounting update set radius key set r adi us s erver set ta ...

  • Cisco Systems 78-15328-01 - page 246

    2-202 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set acco unt ing upd ate set accountin g update T o con figure the fr equen cy of account ing updat es, use th e set accounting update command. set accounting update { new-inf o | { periodic [ int erv al ...

  • Cisco Systems 78-15328-01 - page 247

    2-203 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set acllog ratelimit set acllog ratelimit T o lim it the nu mbe r of pa ckets se nt to the r oute p roc essor CPU for bri dged ACEs, use the set ac llog rate limit command . set acllog ratelimit ra t ...

  • Cisco Systems 78-15328-01 - page 248

    2-204 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set aclme rge algo set aclmerge algo T o selec t the A CL mer ge algori thm, u se the set acl merge alg o command. set aclm erge al go { bdd | odm } Syntax D escr i pti on Defaults The mer ge algorit hm ...

  • Cisco Systems 78-15328-01 - page 249

    2-205 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set aclm erge bdd set aclmerge bdd T o enabl e or disab le the bina ry dec ision diag ram (BDD ) A C L merge algor ithm, use the set a clmerge bdd comm and. set aclmerge bdd { enable | disable } Synta ...

  • Cisco Systems 78-15328-01 - page 250

    2-206 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set al ias set alias T o define a li ases (sho rtha nd versi on s) of co mm an ds, use the se t al ias command. set alias name comma nd [ pa rameter ] [ para meter ] Syntax D escr i pti on Defaults The d ...

  • Cisco Systems 78-15328-01 - page 251

    2-207 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s s e t ar p set arp T o add IP ad dress- to-MA C address mapping entries to the ARP tabl e and to set th e ARP aging time for the table , use the set arp command . set arp [ dynamic | permanent | stati ...

  • Cisco Systems 78-15328-01 - page 252

    2-208 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set ar p This e xample sho ws how to conf igure a permanent ARP entr y , which will remain in the ARP cache after a system reset: Console> (enable) set arp permanent 198.146.232.23 00-00-0c-30-0f-bc P ...

  • Cisco Systems 78-15328-01 - page 253

    2-209 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set authentication enable set authentica tion enabl e T o enable auth entication using the T A CACS+ , RADIUS, or K erberos serv er to determine if you ha ve pri vileged access permis sion, us e the s ...

  • Cisco Systems 78-15328-01 - page 254

    2-210 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set authent ication enable Usage Guid el i nes Use authen ticati on conf igur ation for both console an d T elnet connec tion attem pts unless you us e the consol e or teln et keywords to sp ecify the a ...

  • Cisco Systems 78-15328-01 - page 255

    2-211 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set auth enticati on login set authentica tion login T o enable T A CA C S+, RADIUS, or K erberos as the authenticati on method for log in, use the set authen tic atio n l og in command. set au then t ...

  • Cisco Systems 78-15328-01 - page 256

    2-212 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set a uth e n t ic a t ion lo g in Usage Guid el i nes This comm and all ows you to choose th e authen tica tion meth od for the we b interfac e. If you configu re the auth entication m ethod for th e HT ...

  • Cisco Systems 78-15328-01 - page 257

    2-213 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set au tho riz at io n comm an d s set authorizatio n commands T o enable auth orization of comman d e vents on the switc h, use the set authorizat ion comm ands comm and. set auth ori zation co mma n ...

  • Cisco Systems 78-15328-01 - page 258

    2-214 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set authori zation com m a nds Exam ples This exampl e shows ho w to enable author ization for a ll commands with th e if-authentic ated option and none fallback option : Console> (enable) set authori ...

  • Cisco Systems 78-15328-01 - page 259

    2-215 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set authori zation ena ble set authorizatio n enable T o enable auth orization of pri vileged mode sessions on the switch, use the set author ization en able comm and. set auth ori zation ena bl e ena ...

  • Cisco Systems 78-15328-01 - page 260

    2-216 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set a uth o r i zat ion e n a b le Exam ples Th is exam ple shows how to en able authori zation of c onfiguratio n comma nds i n enabl e, privileged l ogin mode, sessions: Console> (enable) set author ...

  • Cisco Systems 78-15328-01 - page 261

    2-217 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set authorization exec set authorizatio n exec T o enable auth orization of ex ec, normal login mode, sessio n ev ents on the switc h, use the set authorization e xec command. set auth ori zation ex e ...

  • Cisco Systems 78-15328-01 - page 262

    2-218 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set authori zation exec Exam ples This example sho ws how to enable au thorization of co nfig uration comman ds in ex ec, normal login mode, sessions: Console> (enable) set authorization exec enable i ...

  • Cisco Systems 78-15328-01 - page 263

    2-219 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set ba nne r lc d set banner lc d T o con figure th e Ca talyst 650 0 se rie s Swi tc h Fabric Mod ule L CD use r bann er, use the set banner lcd comm and. set banner lcd c [ tex t ] c Syntax Descript ...

  • Cisco Systems 78-15328-01 - page 264

    2-220 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set bann er m ot d set banner motd T o prog ram an MO TD banner to appear befo re ses sion log in, us e the set banner motd comman d. set banner motd c [ text ] c Syntax D escr i pti on Defaults Thi s co ...

  • Cisco Systems 78-15328-01 - page 265

    2-221 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set banner tel net set banner te lnet T o di splay o r s uppr ess t he “ Cisc o System s Conso le” T elnet ba nner me ssage , use the s et banner telnet comm and. set banner telnet { enable | disa ...

  • Cisco Systems 78-15328-01 - page 266

    2-222 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set boot aut o-conf ig set boot auto-con fig T o specif y one or mor e configur ation files to us e to config ure the switc h at bootup, use the set boot auto-c onfig comm and. Th e li st o f c on figu r ...

  • Cisco Systems 78-15328-01 - page 267

    2-223 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set boo t config -regist er set boot config -register T o con fi gu re t he b oot co nfi gu rat ion regi ster va lue , use th e s et bo ot co n fig-regis te r co mman d. set boot conf ig-register 0x v ...

  • Cisco Systems 78-15328-01 - page 268

    2-224 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set boot conf ig-regis t er The baud rate speci fied in the conf iguration re gister is use d by the R OM monito r only and is dif feren t from the baud rate spe cif ied by the set system baud command. W ...

  • Cisco Systems 78-15328-01 - page 269

    2-225 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set boo t config -regist er Relat e d Commands copy set boot auto-c onfig set boot system flas h set conf ig acl n vram show boot show conf ig ...

  • Cisco Systems 78-15328-01 - page 270

    2-226 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set boot conf ig-regis t er auto-c onf ig set boot config -register au to-config T o configure auto -config file dispe nsation, use the set boot conf ig-reg ister auto -conf ig co mmand . set boot co nfi ...

  • Cisco Systems 78-15328-01 - page 271

    2-227 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set boot config-register auto-config If you use the set boot auto-con f ig bootflash: switch.cf g with the overwri te option , you mu st use the copy conf ig bootflash:switch.cfg command to sav e the ...

  • Cisco Systems 78-15328-01 - page 272

    2-228 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set boot conf ig-regis t er auto-c onf ig This e xample sho ws how to enable synchronizatio n of the auto-conf ig file: Console> (enable) set boot config - register auto - config sync enable Configura ...

  • Cisco Systems 78-15328-01 - page 273

    2-229 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set boot device set boot device T o set the Network Analysis Module (NAM) or Int rusion Detection System (IDS) boot environment, use the set boot device command . set boot device bootseq [ , boots eq ...

  • Cisco Systems 78-15328-01 - page 274

    2-230 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set boot dev ice This example shows ho w to specify mul tiple boo t en vironme nts on modul e 5: Console> (enable) set boot device hdd,hdd:5,pcmcia:slot0,network,hdd:6 5 Device BOOT variable = hdd,hdd ...

  • Cisco Systems 78-15328-01 - page 275

    2-231 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set boot sync no w set boot sync now T o imm ediately initiate synchr onization of the s ystem im age be tween th e acti ve an d redund ant supervi sor engine, use the set bo ot sync now command. set ...

  • Cisco Systems 78-15328-01 - page 276

    2-232 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set boot system f lash set boot system fla sh T o set the BOOT envi ronment v ar iable tha t specif ies a li st of ima ges th e switc h load s at sta rtup, u se th e set boot system flas h com mand. set ...

  • Cisco Systems 78-15328-01 - page 277

    2-233 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set bo ot system flash Relat e d Commands clear boo t syste m show boot ...

  • Cisco Systems 78-15328-01 - page 278

    2-234 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set ca m set cam T o add entries int o the CAM table, set the agin g time for the CAM table, and c on fi gu re t raf f ic fi lt er in g from and to a specifi c host, us e t he set cam co mmand . set cam ...

  • Cisco Systems 78-15328-01 - page 279

    2-235 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set ca m Usage Guid el i nes If the gi ven MA C address is a multicast address (the least signif icant bit of the most significant b yte is set to 1) or broadcast a ddress (f f-f f-f f-f f-f f-ff ) an ...

  • Cisco Systems 78-15328-01 - page 280

    2-236 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set cam not if i cation set cam notification T o enable n otif ication when a MA C addr ess change occurs to the CAM tabl e and to set the tim e between notif ications , use the set ca m noti f ica tion ...

  • Cisco Systems 78-15328-01 - page 281

    2-237 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set cam notification Command Mode s Pri vile ged. Usage Guid el i nes Y ou can gl obally disab le notificatio ns using the set cam notificat ion disable co mman d, but the othe r notif ication c onfi ...

  • Cisco Systems 78-15328-01 - page 282

    2-238 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set cam not if i cation Relat e d Commands clear ca m clear ca m notif icatio n set cam set snmp tr ap show cam show ca m notificati on ...

  • Cisco Systems 78-15328-01 - page 283

    2-239 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set cd p set cdp T o ena ble , disa ble, or co nfigure Ci sco D isc overy Protoc ol (CD P) fea ture s g loba lly on al l po rts o r on specif ied p orts, use the set cdp co mman d. set cdp { enable | ...

  • Cisco Systems 78-15328-01 - page 284

    2-240 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set cd p Usage Guid el i nes The set cdp v ersion command allo ws you to global ly set the hi ghes t version n umber of CDP p ackets t o send. If you ente r the glo bal set cdp enable or disable comman d ...

  • Cisco Systems 78-15328-01 - page 285

    2-241 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set channelprotocol set channelp rotocol T o set th e protoc ol that man ages chan nelin g on a module , use the se t channe lprotocol comman d. set channelpr otocol { pagp | lacp } mod Syntax Descrip ...

  • Cisco Systems 78-15328-01 - page 286

    2-242 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set chan nel protoc ol Relat e d Commands clear la cp-channel stati stics set lacp-channel sy stem-pr iority set port lacp-channel set spant ree cha nnelcost set spant ree cha nnelvlancos t show channelp ...

  • Cisco Systems 78-15328-01 - page 287

    2-243 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set c hannel vlancost set channel vla ncost T o s et the ch an nel V LAN co st, use th e set channel vlancost comm and. set channel vlan cost c hannel_id cos t Syntax Descript ion Defaults The def a u ...

  • Cisco Systems 78-15328-01 - page 288

    2-244 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set chan nel vlanc ost After you enter this comm and, you must reenter the set s pantr ee portvlanco st comm and so th at the desired VLAN or VL ANs are a ssociated with all th e channe l ports. This exa ...

  • Cisco Systems 78-15328-01 - page 289

    2-245 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set config acl nvram set config acl n vram T o copy the curren t commi tted A CL co nfiguration fr om DRA M back into NVRA M, us e the set config acl n vram com ma nd . set config acl nv r a m Syntax ...

  • Cisco Systems 78-15328-01 - page 290

    2-246 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set config mode set config mod e T o chang e the configu ration mode from a bi nary mode l to a text model or t o automa tica lly sav e the system co nfiguration in text mode in NVRAM , use the set conf ...

  • Cisco Systems 78-15328-01 - page 291

    2-247 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set confi g m ode In relea se 7.6(1 0) and lat er releas es, the maxi mum valu e that you can set for the mins v al ue i s 35000 minutes ( 25 days). An y commands with an inter v al conf iguration tha ...

  • Cisco Systems 78-15328-01 - page 292

    2-248 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set cops set cops T o conf igure COPS funct ionality , use the set cops comm and. set cops se rver ipaddress [ port ] [ primary ] [ diff-serv | rsvp ] set cops domain-name d omain_nam e set cops retry-in ...

  • Cisco Systems 78-15328-01 - page 293

    2-249 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set cops Names such as the ser ver , domain-name, an d roles can contain a max imum of 31 characters ; longer names are truncate d to 31 characters. V alid letters are a-z, A-Z, 0-9, ., - and _. Names ...

  • Cisco Systems 78-15328-01 - page 294

    2-250 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set cryp to ke y r sa set crypto key rsa T o gen erate and c onfigure an RSA key pa ir, use the set c rypto key rsa command. set cry pto k ey rsa nbits [ fo rc e ] Syntax D escr i pti on Defaults The co ...

  • Cisco Systems 78-15328-01 - page 295

    Chapter 2 Catalyst 6 500 Series Swi tch and ROM M onitor Commands set def ault port status 2-251 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 222 set default portstatus T o set t he def ault port sta tus, use the set default portstatus com mand. set default portstatus { enable | disable } Syntax Descript ion Defaults The ...

  • Cisco Systems 78-15328-01 - page 296

    2-252 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set dot1q- all-tagg ed set dot1q-all-tagged T o chang e all existing and new dot1q trunk s to the dot1q- only mode , use the set dot1q-all-tagged comm and. set dot1q- all-t agged { enable | disable } Syn ...

  • Cisco Systems 78-15328-01 - page 297

    2-253 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set dot1x set dot1x T o conf igure dot1 x on a syste m, use the set do t1x comm and. set dot1x sy stem-auth-contr ol { enable | disable } set dot1x { quiet-period | tx-peri od | re-aut hperiod } seco ...

  • Cisco Systems 78-15328-01 - page 298

    2-254 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set d ot1x • re-a uthperiod is 3600 secon ds • supp-timeout is 30 seconds • server-timeo ut is 30 seco nds • max-req count is 2 • shutdown-timeout is 300 seconds. Comma nd T ypes Sw itch co mma ...

  • Cisco Systems 78-15328-01 - page 299

    2-255 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set dot1x This e xample sho ws you ho w to sp ecify t h e reauthen tication ti me: Console> (enable) set dot1x re-authperiod 7200 dot1x re-authperiod set to 7200 seconds Console> (enable) Th is ...

  • Cisco Systems 78-15328-01 - page 300

    2-256 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set e nab lep a s s set enablepa ss T o change the passw ord for the pri vileged le vel of the CLI, use the set enablepass comm and. set enablepass Syntax D escr i pti on This comm and ha s no a rgume nt ...

  • Cisco Systems 78-15328-01 - page 301

    2-257 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set er rdisabl e-time out set errdisable-timeout T o conf igure a ti meout to au tomatically r e enable p orts that are in the er rdisable st ate, use the set errdisable -timeout comm and. set errdis ...

  • Cisco Systems 78-15328-01 - page 302

    2-258 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set errdisa ble-time out Y o u can enable or disable e rrdisable t imeout fo r each of the reason s that are lis ted. If you specif y "other ," all ports e rrdis abled by causes other than the ...

  • Cisco Systems 78-15328-01 - page 303

    2-259 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set er rordetect ion set errordetection T o enabl e or disab le various erro r detect ions, us e the set err ordete ction command . set err ordetection inband enable | disable set err ordetection memo ...

  • Cisco Systems 78-15328-01 - page 304

    2-260 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set errord et ection Relat e d Commands sho w err ordetection ...

  • Cisco Systems 78-15328-01 - page 305

    2-261 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set fea ture ag g-link- partner set feature ag g-link-partner T o enable or dis able the aggres si ve link partn er featu re, use the set fe ature agg-link-partner command. set featur e agg-link-partn ...

  • Cisco Systems 78-15328-01 - page 306

    2-262 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set feature dot1x -rad ius-k eep alive set feature do t1x-radius-keep alive T o ena ble o r disab le the 80 2.1 X RADIU S keep alive state, use the set feature dot1x-radius-k eepalive comm and. set featu ...

  • Cisco Systems 78-15328-01 - page 307

    2-263 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set feature mdg set feature mdg T o enable or disable the multiple defau lt gate way feature, use the set feature mdg command. set fe atur e mdg { enable | di sa ble } Syntax Descript ion Defaults Thi ...

  • Cisco Systems 78-15328-01 - page 308

    2-264 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set garp timer set garp timer T o adjust the v alues of the join, leav e, and leav eall timers, u se the set garp timer com mand . set garp timer { timer_type } { time r_v al ue } Syntax D escr i pti on ...

  • Cisco Systems 78-15328-01 - page 309

    2-265 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set gmrp set gmrp T o enable or d isable GARP Mult icast Reg istration Protoco l (GMRP) on the swit ch in all VLANs on all ports, use the set gm rp comman d. set gmrp { en ab le | disa ble } Syntax De ...

  • Cisco Systems 78-15328-01 - page 310

    2-266 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set gmrp f wdall set gmrp fwdall T o enab le or di sable the Forward All fe ature on a specified port or mo dule an d port lis t, use t he set gmrp fwdall comman d. set gm rp fw da ll { enable | disable ...

  • Cisco Systems 78-15328-01 - page 311

    2-267 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set g mrp regi strat ion set gmrp registration T o spec ify the GMRP regi strat ion type, us e the set gmrp regist ration co mmand. set gmrp registra tion { no rmal | fix e d | forbidden } mod/p ort.. ...

  • Cisco Systems 78-15328-01 - page 312

    2-268 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set gmrp timer set gmrp timer T o adjust the v alues of the join, leav e, and leav eall timers, u se the set gmrp timer comman d. set gm rp ti me r { timer_type } { tim er_value } Syntax D escr i pti on ...

  • Cisco Systems 78-15328-01 - page 313

    2-269 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set gmrp timer This e xam pl e sho ws how to set t h e lea v eall timer v alue t o 20000 millisec ond s for all t he por ts on al l th e VLANs: Console> (enable) set gmrp timer leaveall 20000 GARP ...

  • Cisco Systems 78-15328-01 - page 314

    2-270 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set gv rp set gvrp T o enab le or disa ble GARP V LAN Registration Protocol (GVRP) globally in the switch or on a pe r-port basis, use the set g vrp command. set gvrp { enable | disable } [ mod/port ] Sy ...

  • Cisco Systems 78-15328-01 - page 315

    2-271 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set gvrp ap plicant set gvrp appli cant T o s pecify whether or not a VLAN is de clare d out of blocki ng ports, use the set gv rp ap pli cant comm and. set gvrp applica nt { normal | active } { mod/p ...

  • Cisco Systems 78-15328-01 - page 316

    2-272 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set gvrp dyna mic- vlan- creati on set gvrp dynamic-vlan-creatio n T o enab le or d isable dynamic VLAN creatio n, use the s et gv rp dynamic-v lan-c reation command. set gvrp dy namic- vlan- creation { ...

  • Cisco Systems 78-15328-01 - page 317

    2-273 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set gvr p regist ration set gvrp reg istra tion T o s et the ad mini stra tive contro l of a n outbo und po rt a nd a pply t o all V L ANs on the tr unk , use t he set gvr p re gistra tion comma nd. G ...

  • Cisco Systems 78-15328-01 - page 318

    2-274 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set gvrp r egi stratio n This e xample shows ho w to set the administrative control to forb idden on m odu le 5, por t 2 : Console> (enable) set gvrp registration forbidden 5/2 Registrar Ad mini strat ...

  • Cisco Systems 78-15328-01 - page 319

    2-275 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set gvrp timer set gvrp timer To adju st the v alues of th e join, le av e, and lea veall time rs, use the set gvrp timer command. set gvrp timer { timer_type } { timer_ value } Syntax Descript ion De ...

  • Cisco Systems 78-15328-01 - page 320

    2-276 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set gvr p timer This e xam pl e sho ws how to set t h e lea v eall timer v alue t o 20000 millisec ond s for all t h e ports on all th e VLANs: Console> (enable) set gvrp timer leaveall 20000 GVRP/GAR ...

  • Cisco Systems 78-15328-01 - page 321

    2-277 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set igmp set igmp T o ena ble o r di sab le Inte rnet Group Ma nag eme nt Pr otoc ol ( IG MP) s noop ing on the swi tch , use the set ig mp command. set igmp { en ab le | disable } Syntax Descript ion ...

  • Cisco Systems 78-15328-01 - page 322

    2-278 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set ig mp fastbl ock set igmp fastblock T o enable or d isable the IGMP v ersion 3 fast-bloc k mechanism on the switch, use the set i gmp fastb lock comm and. set ig mp fa stbl ock { enable | disable } S ...

  • Cisco Systems 78-15328-01 - page 323

    2-279 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s se t igmp fastleave set igmp fastleave T o ena ble o r di sab le Inte rn et Group M anag em ent Prot ocol (IG MP) fa stleave proc essin g, us e the set i gmp fa stleave comman d. set ig mp fa stle ave ...

  • Cisco Systems 78-15328-01 - page 324

    2-280 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set igmp flo odi ng set igmp flooding T o acti vate o r to p re ven t flooding o f multica st traf fic a fter the last host lea ves a m ulticast group, e nter the set igmp f loodin g co mman d. set ig mp ...

  • Cisco Systems 78-15328-01 - page 325

    2-281 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set igmp leave-quer y-type set igmp leave-que ry-type T o s et the t ype o f que ry t o be se nt w h en a po rt r ece ives a leave messag e, us e the se t igmp lea ve-query-type comman d. set igmp lea ...

  • Cisco Systems 78-15328-01 - page 326

    2-282 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set igmp mode set igmp mode T o s et the IG MP snoopi n g m ode, us e th e set igmp mode co mmand . set igmp mode { igmp-only | igmp-cgmp | aut o } Syntax D escr i pti on Defaults The default is IGMP mod ...

  • Cisco Systems 78-15328-01 - page 327

    2-283 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set igmp ratelimit set igmp ratelimit T o enable o r disable IGMP rate limiting or to set t h e rate limit for I GMP snooping p ackets, use the set igmp ratelimit comman d. set igmp ratelimit { enable ...

  • Cisco Systems 78-15328-01 - page 328

    2-284 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set i gmp rate lim it Usage Guid el i nes The set igmp ratelimit { en ab le | disable } comma nd i s suppor ted in bot h t ext and bina ry c onfiguratio n modes. If IGMP r ate limi ting and multicast are ...

  • Cisco Systems 78-15328-01 - page 329

    2-285 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set igmp querier set igmp querier T o conf igure the IGMP q uerier fo r a specif ic VLAN, use the set igmp quer ier command . set igmp querier { enable | disable } vlan set igmp querier vl an { qi | o ...

  • Cisco Systems 78-15328-01 - page 330

    2-286 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set ig mp querier This exampl e shows ho w to set the quer ier inter val to 130 seconds for VL AN 4001: Console> (enable) set igmp querier 4001 qi 130 QI for VLAN 4001 set to 130 second(s) Console> ...

  • Cisco Systems 78-15328-01 - page 331

    2-287 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set igmp v3- processing set igmp v3-processing T o explic itly e nabl e or disa ble I GMP version 3 snoo ping, u se the set igmp v3-processing comm and. set igmp v3 -processing { enable | disable } Sy ...

  • Cisco Systems 78-15328-01 - page 332

    2-288 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set inline pow er def aul ta llocati on set inlinepower defaultallocation T o set t he def ault po wer allocation for a po rt, use th e set inl inepower defaultallocation command. set inlinepowe r defaul ...

  • Cisco Systems 78-15328-01 - page 333

    2-289 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set interface set interface T o conf igure the in- band and Serial L ine Inter net Proto col (SLIP) interf aces on the switc h, use th e set interface command. set inte rface { sc0 | sl0 | sc 1 } { up ...

  • Cisco Systems 78-15328-01 - page 334

    2-290 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set in terfac e Usage Guid el i nes The set interfac e sc0 dchp command i s valid only whe n the address is learned f r om the DHCP server and available in privile ged mode only. T wo conf igur able netw ...

  • Cisco Systems 78-15328-01 - page 335

    2-291 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set interface This exa mple sho ws ho w to releas e a DHCP- learned IP address back to the D HCP IP addres s pool : Console> (enable) set interface sc0 dhcp release Releasing IP address...Done Cons ...

  • Cisco Systems 78-15328-01 - page 336

    2-292 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set i p a l ia s set ip alias T o add aliases o f IP addresses, use the s et ip alias comman d. set ip alias name i p_addr Syntax D escr i pti on Defaults The de fault configurat ion is one IP al ias (0. ...

  • Cisco Systems 78-15328-01 - page 337

    2-293 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set ip dns set ip dns T o enab le or dis able DNS, use the set ip dns comman d. set ip dns { ena bl e | di sa ble } Syntax Descript ion Defaults The def ault is DNS is d isabled. Comma nd T ypes Sw it ...

  • Cisco Systems 78-15328-01 - page 338

    2-294 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set ip dn s domai n set ip dns domain T o set t he defau lt DNS doma in name, u se the se t ip dns doma in command. set ip dns domain nam e Syntax D escr i pti on Defaults Thi s command has no de fa ult ...

  • Cisco Systems 78-15328-01 - page 339

    2-295 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set ip dns server set ip dns server T o set the IP addre ss of a Dom ain N ame Sy ste m (DNS ) server, use the se t ip dns server comman d. set ip dns server ip_a ddr [ primary ] Syntax Descript ion D ...

  • Cisco Systems 78-15328-01 - page 340

    2-296 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set i p fr agm en t atio n set ip fragmentation T o ena ble or d isable t he frag menta tion of IP packe ts bridge d betw een FDDI and Et herne t networ ks, use the set ip fragment ation command. set ip ...

  • Cisco Systems 78-15328-01 - page 341

    2-297 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set ip http port set ip http port T o conf igure the TCP port num ber for the Hy perT ext T ransfer Proto col (HTTP) serv er , use the set ip http port comma nd. set ip http por t { default | po rt- n ...

  • Cisco Systems 78-15328-01 - page 342

    2-298 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set i p ht tp ser v er set ip http server T o e na bl e o r di sab l e th e H TT P se rver, use th e se t ip http server comma nd. set ip http server { enable | disable } Syntax D escr i pti on Defaults ...

  • Cisco Systems 78-15328-01 - page 343

    2-299 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set ip permit set ip permit T o enable o r disable the IP permit li st and to specify IP a ddresses to b e added to the I P permit list , use the set ip permit com mand. set ip permit { enable | disab ...

  • Cisco Systems 78-15328-01 - page 344

    2-300 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set i p p e rm it Exam ples This example sho ws how to add an IP address to the IP permit list: Console> (enable) set ip permit 192.168.255.255 192.168.255.255 added to IP permit list. Console> (en ...

  • Cisco Systems 78-15328-01 - page 345

    2-301 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set ip redirect set ip redirect T o enable o r disabl e ICMP redire ct me ssage s on the Catalyst 6500 se ries switches, u se the set ip redirect co mman d. se t i p re d i re c t { enable | disable } ...

  • Cisco Systems 78-15328-01 - page 346

    2-302 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set ip route set ip route T o add IP addr esses or alia ses to the IP routing t able, use the set ip route command . set ip route { destination }[ / netmask ] { gateway } [ metric ] [ prim ar y ] Syntax ...

  • Cisco Systems 78-15328-01 - page 347

    2-303 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set ip route Exam ples These exam ples sho w how to ad d three de fault rou tes to the IP routin g table, ch ecking afte r each addition using the show ip route co mmand: Console> (enable) set ip r ...

  • Cisco Systems 78-15328-01 - page 348

    2-304 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set ip unreac hable set ip unreachabl e T o enable or disable ICMP unreac hable messages o n the Catalyst 6500 ser ies switc h, use the set ip unreac hable comm and. set i p u nreach a b le { enable | di ...

  • Cisco Systems 78-15328-01 - page 349

    2-305 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set kerb eros cli ents mandat ory set kerberos clients ma ndatory T o make K erberos authentica tion mandatory for authenticatin g to services on the netw ork, use the set kerb ero s clients ma ndator ...

  • Cisco Systems 78-15328-01 - page 350

    2-306 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set kerbe ros credent ia ls for ward set kerberos credentials fo rward T o conf ig ure clients to forwa rd users’ creden tials as they con nect to other hosts in the K erberos realm, use the set k erbe ...

  • Cisco Systems 78-15328-01 - page 351

    2-307 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s se t k er ber os lo cal -r eal m set kerberos local-realm T o conf ig ure a switch to authentica te users def ined in the K erberos database, use the set kerberos local-r ealm co mmand . set ker b ero ...

  • Cisco Systems 78-15328-01 - page 352

    2-308 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set kerbe ros realm set kerberos realm T o map th e name of a Kerberos re alm to a DNS domai n name or a host name, use the set ke rberos realm comm and. set k erb eros rea lm { dns_domai n | host } kerb ...

  • Cisco Systems 78-15328-01 - page 353

    2-309 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set k erb eros se rv er set kerberos server T o s pecify whi ch Key Distribution Ce nte r (K DC) to us e on the swi tch , use the se t kerberos server comm and. set ker b eros s erver ke rberos_r ea l ...

  • Cisco Systems 78-15328-01 - page 354

    2-310 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set kerbe ros srvt ab entry set kerberos srvtab ent ry T o enter the SR VT AB f ile directly into the switc h from the comma nd line, use th e set kerberos srvtab entry command. set ker beros s rvtab ent ...

  • Cisco Systems 78-15328-01 - page 355

    2-311 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set kerbero s srvtab entry Exam ples This example sho ws how to enter a SR VT AB file dire ctly into the switch: Console> (enable) set kerberos srvtab entry host/niners.cisco.com@CISCO.COM 0 932423 ...

  • Cisco Systems 78-15328-01 - page 356

    2-312 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set kerbe ros srvt ab rem ote set kerberos srvtab re mote T o p rovide th e sw it ch w it h a c opy of t he SR VT A B file f rom t h e KD C t ha t c onta ins t he sec r et key , us e the set ke rbero s s ...

  • Cisco Systems 78-15328-01 - page 357

    2-313 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set key config- key set key config-key T o d efine a private 3DES key , use th e set key conf ig-ke y command . set key conf ig- key string Syntax Descript ion Defaults Thi s command has no de fa ult ...

  • Cisco Systems 78-15328-01 - page 358

    2-314 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set l2prot oco l-tun nel cos set l2protoco l-tunnel c os T o apply a CoS value to all ingress tunneling ports, use the set l 2protocol-tunnel cos comm and. set l2protoc ol-tunnel cos cos -val ue Syntax D ...

  • Cisco Systems 78-15328-01 - page 359

    2-315 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set l2p rotocol-tunnel trunk set l2protoco l-tunnel trunk T o set La yer 2 proto col tunnel ing on tru nks, use the set l2pr ot ocol-tunnel trunk comman d. set l2protoc ol-tunnel trunk { enable | disa ...

  • Cisco Systems 78-15328-01 - page 360

    2-316 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set lacp-ch annel s ys te m-prior it y set lacp-channe l system-priority T o set t he priority o f the sy stem, use th e set lacp-channel system-priority command. set lacp-channel sy stem-pr iority va lu ...

  • Cisco Systems 78-15328-01 - page 361

    2-317 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set lcperroraction set lcperrorac tion T o con figure h ow your sy stem ha ndles Li nk Co nt rol Proto co l (L CP) e rro rs when a m odu le repor ts an ASIC proble m to the NMP , use the set lcperrora ...

  • Cisco Systems 78-15328-01 - page 362

    2-318 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set ld a set lda T o conf ig ure the ASLB information on the Catalyst 6500 series switch , use the set lda comman d. set lda enable | di sable set lda vip { server _ vi rtua l_ ip } { destin ation _ tcp_ ...

  • Cisco Systems 78-15328-01 - page 363

    2-319 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set lda Usage Guid el i nes This c omm and is suppor ted on ly o n sw itc he s configu red w ith th e Supe r visor En gine 1 wi th L aye r 3 Switching Engine WS-F6K-PFC (Pol icy Feature Card) . Y o u ...

  • Cisco Systems 78-15328-01 - page 364

    2-320 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set ld a This e xample sho ws ho w to specif y the rout er VLAN: Console> (enable) set lda router 110 4/26 Successfully set router vlan and ld port. Use commit lda command to save settings to hardware ...

  • Cisco Systems 78-15328-01 - page 365

    2-321 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set length set length T o conf igure the nu mber of lin es in t he terminal d isplay screen, u se the se t length co mman d. set length nu mber [ default ] Syntax Descript ion Defaults The de fault va ...

  • Cisco Systems 78-15328-01 - page 366

    2-322 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set l o c a lu ser set localuser T o conf igure the switch to u se loc al u s er auth en tic atio n to auth en tic ate ac ces s o n the s witch , use the set localuser command. set lo cal use r aut hen t ...

  • Cisco Systems 78-15328-01 - page 367

    2-323 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set localuser Exam ples This examp le sho ws ho w to use the creat e a local user acc ount, inclu ding pas swor d and pri vilege le vel: Console> (enable) set localuser user picard password captain ...

  • Cisco Systems 78-15328-01 - page 368

    2-324 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set loggin g buffer set logging bu ffer T o lim it the numbe r of sy stem logg i ng me ssage s buffered, use th e set logging buffer comman d. set lo gging buffer bu ff er _ si z e Syntax D escr i pti on ...

  • Cisco Systems 78-15328-01 - page 369

    2-325 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set logging console set logging co nsole T o enable and disable the sendi ng of sy stem l ogging messages to the console , use t he set logging co nsole comm and. set loggi ng consol e { en a ble | di ...

  • Cisco Systems 78-15328-01 - page 370

    2-326 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set logg in g history set logging hist ory T o s et th e numbe r an d s ev erity level of sysl og me ssages se nt t o the sysl og hi story ta ble, u se the set log gin g hist ory command . set loggi ng h ...

  • Cisco Systems 78-15328-01 - page 371

    2-327 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set loggi ng level set logging leve l T o set the faci lity and se verity lev el used when logging system messages, use the se t logging level comm and. set logging le vel facility se verity [ default ...

  • Cisco Systems 78-15328-01 - page 372

    2-328 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set l o g g in g leve l Defaults The defau lt is faci lity is set to all , and leve l is se t to 0 . Comma nd T ypes Sw itch co mman d. Command Mode s Pri vile ged. Usage Guid el i nes Y ou can a lso set ...

  • Cisco Systems 78-15328-01 - page 373

    2-329 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set loggi ng level Exam ples This example shows h ow to set the default f acility and se verity le vel for system message logging: Console> (enable) set logging level snmp 2 default System logging ...

  • Cisco Systems 78-15328-01 - page 374

    2-330 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set logg ing se rve r set logging server T o ena ble a nd disa ble system m essage lo gging to co nfigured syslo g se rvers a nd t o add a s yslog se rver to the sy stem loggin g serv er table, use the s ...

  • Cisco Systems 78-15328-01 - page 375

    2-331 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set logging server Comma nd T ypes Sw itch co mman d. Command Mode s Pri vile ged. Usage Guid el i nes Y ou ca n also se t the loggin g lev el by using th e set l ogging level command. I f you do not ...

  • Cisco Systems 78-15328-01 - page 376

    2-332 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set l o g g in g sess io n set logging sessi on T o enable o r disab le the sending of sy stem logging messa ges to the c urrent log in session , use the se t logging session co mmand . set logging sessi ...

  • Cisco Systems 78-15328-01 - page 377

    2-333 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set logging telnet set logging teln et T o enab le or dis able loggi ng on T elnet sessi ons, us e the set logging telnet command. set lo gging te ln et { en a b le | disa ble } Syntax Descript ion De ...

  • Cisco Systems 78-15328-01 - page 378

    2-334 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set l o g g in g tim esta mp set logging timestamp T o enab le or disabl e the time -stamp displa y on system logging m essages, us e the set logg ing times tamp comm and. set loggi ng ti mestamp { ena b ...

  • Cisco Systems 78-15328-01 - page 379

    Chapter 2 Catalyst 6 500 Series Swi tch and ROM M onitor Commands set logout 2-335 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 22 set logout T o set t he number of minutes until th e system di sconnects an idle session automatically , use the set logout command. set logout timeout Syntax Descript ion Defaults The defau ...

  • Cisco Systems 78-15328-01 - page 380

    2-336 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set m l s ag in gt ime set mls agingtime T o specify the MLS agin g time of shortcuts to an MLS entry in the Catalyst 6500 series switches, use the set mls agingtime comm and. set mls aging time [ ip | i ...

  • Cisco Systems 78-15328-01 - page 381

    2-337 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set mls agingti m e If you ente r any of the set mls commands on a Cat a lyst 65 00 series sw itch without MLS, thi s warnin g message di splays: MLS not supported on feature card . The agingtime v al ...

  • Cisco Systems 78-15328-01 - page 382

    2-338 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set m l s ag in gt ime Relat e d Commands clear mls statistics entry show mls ...

  • Cisco Systems 78-15328-01 - page 383

    2-339 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set mls bridged-flow-statistics set mls bridged-f low-statistics T o enable o r disable sta tistics for bridged flo ws for specifi e d VLANs, u se the set mls bridged- flow-s tat istics command. set m ...

  • Cisco Systems 78-15328-01 - page 384

    2-340 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set mls cef l oad -balan ce set mls cef load-bal ance T o in cl ude or exclu de L ayer 4 por ts in a loa d-b ala nc ing hash, us e the set m ls c ef loa d-balance comm an d. set mls ce f l oad-b alance { ...

  • Cisco Systems 78-15328-01 - page 385

    2-341 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set mls cef per-prefix-statistics set mls cef per-prefix-statistics T o set MLS CEF per -prefix s tatistics mode, use the set m ls c ef per-pr efix statistics command . set mls cef pe r -pref ix stati ...

  • Cisco Systems 78-15328-01 - page 386

    2-342 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set mls excl ude prot oco l set mls exclude protoco l T o exclude an M LS protoco l port on a switch co nfigured with the Supervis or Engin e 1 with Layer 3 Switching Engine WS-F6K-PFC, use the set mls e ...

  • Cisco Systems 78-15328-01 - page 387

    2-343 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set mls flow set mls flow T o specif y the minim um flo w mask used for MLS, use the set mls flow comman d. Th is com mand is needed to collect statistics f or the superv isor engin e. set mls flow { ...

  • Cisco Systems 78-15328-01 - page 388

    2-344 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set m ls flow Exam ples Th ese examples show how to specify that only expired flows to subnet 171. 69.194.0 a re exported: Console> (enable) set mls flow destination Configured flow mask is set to des ...

  • Cisco Systems 78-15328-01 - page 389

    2-345 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set m ls nd e set mls nde T o conf igure the NetFlo w Data Export (NDE) feature in the Catalyst 6500 series switches to allo w comman d-export ing stati stics to be sent to the preco nfigured colle ct ...

  • Cisco Systems 78-15328-01 - page 390

    2-346 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set m ls nde Defaults The def aults are N etflo w Data Export v ersion 7, and all expired flo ws are expo rted until the f ilter is specif ied explicitly . Destination ifInde x support and source ifIndex ...

  • Cisco Systems 78-15328-01 - page 391

    2-347 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set m ls nd e Use th e foll ow ing s yntax to speci fy an IP subn et add ress: • ip_subnet _addr —T his i s the sho rt su bnet addr e ss form at. T he t rai ling de cim al n umbe r 0 0 in an IP ad ...

  • Cisco Systems 78-15328-01 - page 392

    2-348 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set m ls nde This e xample sho ws how to specify that all e xpired flows ex ce pt those from a specif ic host to a specif ic destin ati on port are export ed: Console> (enable) set mls nde flow exclud ...

  • Cisco Systems 78-15328-01 - page 393

    2-349 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set mls rate set mls rate T o set the rate at which inde x-directed pac kets are sent to the MSFC, u se the set mls rate comman d. set mls rate kpps Syntax Descript ion Defaults The kpp s argume nt is ...

  • Cisco Systems 78-15328-01 - page 394

    2-350 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set mls sta ti st ic s protocol set mls statistics proto col T o add protocols to the protocols stat istics list, use the set mls stat isti cs protocol command. set mls sta tistics protocol pr otoc ol sr ...

  • Cisco Systems 78-15328-01 - page 395

    2-351 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set mls verify set mls verify T o enabl e or disab le ch ecksu m or packet ch eckin g based on packe t lengt h, use the set mls verify comm and. set mls veri fy checksum { enab le | disa ble } set mls ...

  • Cisco Systems 78-15328-01 - page 396

    2-352 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set ml s verif y Exam ples This examp le sho ws ho w to enable IP check sum: Console> (enable) set mls verify checksum enable Ip checksum verification enabled Console> (enable) This exam ple sh ows ...

  • Cisco Systems 78-15328-01 - page 397

    2-353 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set module set module T o en able or d isable a m odule, u se th e set module comm and. set m o du le en a ble | disable mod Syntax Descript ion Defaults The def ault is all module s are en abled. Com ...

  • Cisco Systems 78-15328-01 - page 398

    2-354 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set modul e This exampl e shows ho w to disabl e module 2 when conne cted via a T elnet session: Console> (enable) set module disable 2 This command may disconnect your telnet session. Do you want to ...

  • Cisco Systems 78-15328-01 - page 399

    2-355 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set module na m e set module name T o set th e name for a module, use the set module name command. set module name mod [ mod_n ame ] Syntax Descript ion Defaults The defaul t is no module names are co ...

  • Cisco Systems 78-15328-01 - page 400

    2-356 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set modul e po wer set module power T o turn the po wer on or of f to a module, use the set module power comm and. set module power up | do wn mod Syntax D escr i pti on Defaults The de fault is power is ...

  • Cisco Systems 78-15328-01 - page 401

    2-357 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set module shutdown set module shutdown T o shut down the N AM and Intrusion Dete ction Syste m Module (I DSM), use the set mo dule shutdown comm and. set module shutdow n all | mod Syntax Descript io ...

  • Cisco Systems 78-15328-01 - page 402

    2-358 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set msfcaut ostate set msfcautostate T o enab le or disa ble the line protocol state d etermination of the Multilayer Switch Fea ture Cards (MSFC s) du e to p o rt st ate c ha nges , us e th e se t msfca ...

  • Cisco Systems 78-15328-01 - page 403

    2-359 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set msfcautostate Relat e d Commands show msfcauto state ...

  • Cisco Systems 78-15328-01 - page 404

    2-360 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set msmautos tate set msmautost ate T o en able or disa ble th e line p rotocol st ate de termina tion of t he MSMs due to port st ate ch ange s, use the set msmautostate command . set msmautostate { ena ...

  • Cisco Systems 78-15328-01 - page 405

    2-361 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set multicast router set multicast router T o conf igure a port man ually as a multi cast router por t, use the set mult icast router command. set multi cast rout er mod/port Syntax Descript ion Defau ...

  • Cisco Systems 78-15328-01 - page 406

    2-362 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set ntp broad castc li ent set ntp broadcastc lient T o ena ble o r disab le NTP i n broa dc ast- cli ent mode , use t h e set ntp broadcastclient comman d. set ntp broadcastclie nt { ena b le | di sa bl ...

  • Cisco Systems 78-15328-01 - page 407

    2-363 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set ntp b roadcastde lay set ntp broadcastd elay T o conf igure a tim e-adjust ment facto r so t he Catalys t 6500 series switch can rec eiv e broadcas t pack ets, use the set ntp broadcastdelay comm ...

  • Cisco Systems 78-15328-01 - page 408

    2-364 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set ntp cli ent set ntp client T o enable or disabl e a Catalyst 6500 ser ies switch as an NTP client, use the set ntp client command. set ntp client { enab le | disa ble } Syntax D escr i pti on Default ...

  • Cisco Systems 78-15328-01 - page 409

    2-365 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set ntp server set ntp server T o s peci fy t he N T P server addr ess a nd co nfigure an N TP se rver auth en tica tio n key , us e the set ntp server command. set ntp serv er ip_addr [ key public_ke ...

  • Cisco Systems 78-15328-01 - page 410

    2-366 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set nt p summert ime set ntp summertime T o set th e clock ahead one hou r durin g dayli ght saving time, us e the set ntp summertime command. set ntp summertime { ena ble | disable } [ zone ] set ntp su ...

  • Cisco Systems 78-15328-01 - page 411

    2-367 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set ntp sum mertime Exam ples Th is exampl e shows how to cause the syst em t o set the clock ahead o ne ho ur du ring da ylight saving time: Console> (enable) set ntp summertime enable PDT Summert ...

  • Cisco Systems 78-15328-01 - page 412

    2-368 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set ntp time zone set ntp timezone T o conf igure the time offs et from G re en wi ch M e an Ti me , use the set ntp timezone comm and. set timezone [ zone_n ame ] [ hou rs [ minutes ]] Syntax D escr i p ...

  • Cisco Systems 78-15328-01 - page 413

    2-369 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set password set password T o chan ge the lo gin p assw ord on the CLI, us e the set password comman d. set password Syntax Descript ion This c omm and ha s no a rgume nts o r keywords. Defaults The d ...

  • Cisco Systems 78-15328-01 - page 414

    2-370 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set pb f set pbf T o enable po licy - based for warding (P BF) and to set a MA C address for th e PFC2, use th e set pbf comm and. set pbf [ mac mac_add r ess ] Syntax D escr i pti on Defaults Y ou can u ...

  • Cisco Systems 78-15328-01 - page 415

    2-371 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set pbf Relat e d Commands clear pbf show pbf ...

  • Cisco Systems 78-15328-01 - page 416

    2-372 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set p bf- m ap set pbf-map T o create security A CLs and to set adjace ncy inform ation, use the set pbf-m ap comman d. set pbf -ma p { ip_addr_1 } { m ac_ addr_1 } { vlan_1 } { ip _addr_2 } { m ac_addr_ ...

  • Cisco Systems 78-15328-01 - page 417

    2-373 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set pbf-map If you wan t to add entries other then redirect A CEs to the adjacenc y table, use the set security acl ip PBF_M AP_A CL_(VLA N_ID ) command. Exam ples Th is example shows how to specify a ...

  • Cisco Systems 78-15328-01 - page 418

    2-374 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set port arp-i nspec tion set port arp-ins pection T o set Addre ss Recogni tion Protocol (ARP) inspec tion thre sholds on a per-port basis, use the set por t arp-inspection comman d. set port arp-inspec ...

  • Cisco Systems 78-15328-01 - page 419

    Chapter 2 Catalyst 6 500 Series Swi tch and ROM M onitor Commands set port auxiliaryvlan 2-375 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 2 set port auxiliaryv lan T o conf ig ure the auxiliary VLA N ports, use the set port auxiliaryvlan comman d. set port au xil iaryvla n mod [ /port ] { vlan | untagge d | dot1p | non ...

  • Cisco Systems 78-15328-01 - page 420

    2-376 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set port auxi liaryv lan Exam ples This example shows how to se t the auxilia ry VLAN p ort to untagged : Console> (enable) set port auxiliaryvlan 5/7 untagged Port 5/7 allows the connected device sen ...

  • Cisco Systems 78-15328-01 - page 421

    2-377 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set po rt br oa dca s t set port broadca st T o set broadcast, multica st, or unicast suppres sion for one or more ports, use the set port broadcast command. T h e thres hold limi ts the backp lane tr ...

  • Cisco Systems 78-15328-01 - page 422

    2-378 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set port b roa dcast Exam ples This example sho ws how to limit broadcast tra ff ic to 20 percent: Console> (enable) set port broadcast 4/3 20% Port 4/3 broadcast traffic limited to 20.00%. Console> ...

  • Cisco Systems 78-15328-01 - page 423

    2-379 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port c hannel set port channel T o con figure E the rCh ann el on E ther ne t m odule p orts, u se the set port channel comm and. set port channel mod/port [ adm in_gr oup ] set port channel mod/p ...

  • Cisco Systems 78-15328-01 - page 424

    2-380 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set port chan nel Defaults The def ault is EtherChann el is set to auto and silent on all module ports. The de faults for fra me distribution ar e ip and both . Comma nd T ypes Sw itch co mman d. Command ...

  • Cisco Systems 78-15328-01 - page 425

    2-381 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port c hannel Exam ples Th is ex ampl e sh ows how to s et th e ch an ne l mo de to desirable : Console> (enable) set port channel 2/2-8 mode desirable Ports 2/2-8 channel mode set to desirable ...

  • Cisco Systems 78-15328-01 - page 426

    2-382 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set port cops set port cops T o create port role s, use the set port cops command. set port cops mod / port rol e s ro l e 1 [ ro l e 2 ]. .. Syntax D escr i pti on Defaults The de fault is all por ts ha ...

  • Cisco Systems 78-15328-01 - page 427

    2-383 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set po rt de bo unc e set port debounce T o enabl e or disab le the de bounce t imer or co nfigure the time r setting on a per-port basis , use the set port debounce command. set port debounce mod/por ...

  • Cisco Systems 78-15328-01 - page 428

    2-384 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set port debo unce For 10/100 ports a nd 100BASE-FX ports in the disabl ed state , the firmware may take up to 600 milliseconds to no tif y the supe rviso r en gi ne of a lin k chan ge b eca u se the f i ...

  • Cisco Systems 78-15328-01 - page 429

    2-385 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port disable set port disable T o disa ble a port or a ra nge of por ts, use the set port disable comm and. set port disable mod/ port Syntax Descript ion Defaults The default sy stem co nfigura t ...

  • Cisco Systems 78-15328-01 - page 430

    2-386 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set port dot 1q-all-tagg ed set port dot1q-all-tagged T o enable the 802. 1Q tagging feature o n specif ic ports, use the set port dot1q-all-tagge d comma nd. set po rt d o t1q- all-ta gge d { mod/ port ...

  • Cisco Systems 78-15328-01 - page 431

    2-387 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port dot1q-all-tagged Relat e d Commands set dot1q- all-t agged show dot1q-all-tagged show port dot1q-all-tagged ...

  • Cisco Systems 78-15328-01 - page 432

    2-388 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set port dot 1qtunnel set port dot1qtunne l T o con figure th e dot1q t un nel mo de f or the po rt, use th e set po rt dot1qtunnel command. set port dot1qtunnel mod/ port { access | disable } Syntax D e ...

  • Cisco Systems 78-15328-01 - page 433

    2-389 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set po rt dot1 qtu nn el This examp le shows the output if you try t o turn o n trunki ng on a p ort that ha s dot1q tu nneling m ode set: Console> (enable) set trunk 4/1 on Failed to set port 4/1 ...

  • Cisco Systems 78-15328-01 - page 434

    2-390 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set port dot1 x set port dot1x T o conf igure do t1x on a po rt, u se the set port dot1x comman d. set port dot1x mod/port multiple-host { enable | disable } set port dot1x mod/port { port-control po rt_ ...

  • Cisco Systems 78-15328-01 - page 435

    2-391 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set po rt dot1 x Comma nd T ypes Sw itch co mman d. Command Mode s Pri vile ged. Usage Guid el i nes The dot1x port will not be allowed to become a trunk port, MV AP , channel port, dynamic port, or a ...

  • Cisco Systems 78-15328-01 - page 436

    2-392 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set port dot1 x This e xample sho ws how to enable automat ic reauthentica tion on a p ort: Console> (enable) set port dot1x 4/1 re-authentication enable Port 4/1 re-authentication enabled. Console> ...

  • Cisco Systems 78-15328-01 - page 437

    2-393 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port duplex set port duplex T o configu re the dup lex type of a n Ethe rn et p ort o r a rang e o f p ort s, use the set port duplex comm and. set port duplex mo d/port { full | half } Syntax Des ...

  • Cisco Systems 78-15328-01 - page 438

    2-394 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set p ort enab le set port enable T o enab le a port or a ra nge of p orts, use the set port enable command . set port enable mod/po rt Syntax D escr i pti on Defaults The def ault is all port s are en a ...

  • Cisco Systems 78-15328-01 - page 439

    2-395 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set por t errdi sable-t imeout set port errdisable-timeout T o prevent an er rdisabl ed port fr om being en ab led, use t he set port e rrdisable -timeout command. set port errdisable-ti meout mod/ po ...

  • Cisco Systems 78-15328-01 - page 440

    2-396 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set port flowcont rol set port flowcontrol T o co nf igure a port to se nd or rec eiv e pau se fram es, use the set port fl owcontr ol comman d. Pau se frame s are special pack ets t h at si gnal a sourc ...

  • Cisco Systems 78-15328-01 - page 441

    2-397 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port flowcontrol Ta b l e 2 - 1 5 describes guidelines for dif ferent conf igurations of the send and re c e ive ke ywords . Exam ples Th is example shows how to configure port 1 of mo dule 5 to r ...

  • Cisco Systems 78-15328-01 - page 442

    2-398 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set port gmrp set port gmrp T o enable or disable GMRP on the specified ports in all VLANs, use the set port gmrp command . set port g mrp mod/po rt { ena ble | disable } Syntax D escr i pti on Defaults ...

  • Cisco Systems 78-15328-01 - page 443

    2-399 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port g vrp set port gvrp T o enab le or disa ble GVRP o n the specif ied port s in all VLANs, use the set port gvrp comm and. set po rt g v rp mod/po rt { enable | di sable } Syntax Descript ion D ...

  • Cisco Systems 78-15328-01 - page 444

    2-400 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set port gvrp This examp le shows what happens if you try t o enabl e GVRP on a spe cific port when G VRP has not first been e na ble d u si ng t he set gvrp comman d: Console> (enable) set port gvrp ...

  • Cisco Systems 78-15328-01 - page 445

    2-401 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set po rt host set port host T o optimize the port conf iguration for a host conn ection, use the set port host com mand. set port host mod/ port Syntax Descript ion Defaults Thi s command has no de f ...

  • Cisco Systems 78-15328-01 - page 446

    2-402 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set por t inli n epower set port inlinepower T o s et the i nli ne power mo de of a po rt or group of p orts, u se th e set port inline power command . set po rt i nl in epow er mod /port { off | auto } ...

  • Cisco Systems 78-15328-01 - page 447

    2-403 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port jumbo set port jumbo T o enab le or dis able the jumb o fra me fea ture on a pe r-port ba sis, us e the set port jumbo co mman d. set port ju mbo mo d/port { enable | disable } Syntax Descrip ...

  • Cisco Systems 78-15328-01 - page 448

    2-404 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set port l2 prot ocol-tun nel set port l2protoco l-tunnel T o set La yer 2 proto col tunnel ing para meters, use the set port l2protocol-tunnel command . set port l2protocol-tunnel mod/port { cdp | stp | ...

  • Cisco Systems 78-15328-01 - page 449

    2-405 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port l2protoc ol-tunnel • 20 Layer 2 pro tocol tun neling po rt x 50 VLAN s • 100 Lay er 2 pr otoc ol tunne ling por t x 10 VLAN s Note Th e shut down thresho ld factor s hould exceed the drop ...

  • Cisco Systems 78-15328-01 - page 450

    2-406 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set port lacp-cha nnel set port lacp-channe l T o set the pr iority v alue for ph ysical p orts, to assig n an admi nist rati ve ke y to a particular set of por ts, or to change the chan nel mode for a s ...

  • Cisco Systems 78-15328-01 - page 451

    2-407 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set p ort lacp -channel • Y ou ca n assig n a ma ximu m o f 8 port s to a n a dmini str ative key . • If you assign a n admin istrative ke y to a chan nel that was previously assi gned a part icul ...

  • Cisco Systems 78-15328-01 - page 452

    2-408 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set port m acro set port macro T o execute a co nfiguration ma cro on a per-port basis, us e the set port macr o comma nd. set po rt m a cro mod/por ts... ciscoipphone vlan vlan [ auxvl an au xvla n ] se ...

  • Cisco Systems 78-15328-01 - page 453

    2-409 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port macro Exam ples This exampl e sho ws ho w to ex ecute the Cisco IP Phone conf iguration mac ro with a n auxiliar y VLAN: Console> (enable) set port macro 3/1 ciscoipphone vlan 2 auxvlan 3 ...

  • Cisco Systems 78-15328-01 - page 454

    2-410 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set port m acro VLAN Mod/Ports ---- ----------------------- 32 3/1 16/1 Port 3/1 will not send out CDP packets with AuxiliaryVlan information. Executing autoqos........ All ingress and egress QoS schedul ...

  • Cisco Systems 78-15328-01 - page 455

    2-411 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port membership set port membership T o set t h e VLAN membership assignmen t to a port, u se the set port membership command. set port membership mod/port { dy namic | static } Syntax Descript io ...

  • Cisco Systems 78-15328-01 - page 456

    2-412 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set port member ship Relat e d Commands set pvlan set pvlan mapping set vlan set vlan mapping ...

  • Cisco Systems 78-15328-01 - page 457

    2-413 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port name set port name T o co nf igure a name for a port, use th e set port name comman d. set port name mod/po rt [ port _name ] Syntax Descript ion Defaults The default is no po rt n am e i s c ...

  • Cisco Systems 78-15328-01 - page 458

    2-414 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set p ort nego tia t ion set port negotiatio n T o enabl e or disab le the l ink negotiat ion prot ocol on th e specified port , use th e set port negotiation comm an d. set port negotiation mod/ port { ...

  • Cisco Systems 78-15328-01 - page 459

    2-415 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set por t protocol set port protocol T o enab le or dis able prot ocol member ship of por ts, u se the se t port protocol comm an d. set port protocol mod/port { ip | ipx | group } { on | off | auto } ...

  • Cisco Systems 78-15328-01 - page 460

    2-416 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set port prot ocol Relat e d Commands show port protocol ...

  • Cisco Systems 78-15328-01 - page 461

    2-417 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set po rt qo s set port qos T o specify wheth er an interface is interpreted as a physica l port or as a VLAN, use the set port qos comm and. set port qos mod/ports... port-based | vlan-based Syntax D ...

  • Cisco Systems 78-15328-01 - page 462

    2-418 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set port qos This e xample sho ws the outp ut if you cha nge from por t-base d QoS to VLAN-base d QoS with either RSVP or CO PS enabled on the po rt: Console> (enable) set port qos 3/1-48 vlan Qos int ...

  • Cisco Systems 78-15328-01 - page 463

    2-419 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set por t qos auto qos set port qos autoqos T o appl y the auto matic Qo S feature on a pe r-port basis, use the set port qo s autoqos command. set port qos mod/p ort auto qos tr ust { co s | dscp } s ...

  • Cisco Systems 78-15328-01 - page 464

    2-420 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set por t qo s au toqos Relat e d Commands set qos a utoqos show port qo s show qos acl inf o ...

  • Cisco Systems 78-15328-01 - page 465

    2-421 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port qos cos set port qos cos To set th e def ault val u e for all pa c kets th at hav e arri ve d throug h an un truste d p ort, use the set port qo s cos command. set port qos mod/ports cos cos_ ...

  • Cisco Systems 78-15328-01 - page 466

    2-422 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set p ort qos policy -source set port qos policy-source T o set the QoS policy source for all ports in the specif ied module, use the set port qos polic y-source comm and. set port qos policy-source mod/ ...

  • Cisco Systems 78-15328-01 - page 467

    2-423 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port qos poli cy-source This e x ample sho ws the outpu t if you set the policy so urce to COPS a nd the sw itch is set to local configurati on (usi ng the set qos policy-source command): Console& ...

  • Cisco Systems 78-15328-01 - page 468

    2-424 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set por t qo s tr ust set port qos trust T o set the trusted state o f a port, use the set port qos trust comm and; for exam ple, whether or not t he pack ets ar ri ving at a port a re trust ed to carry ...

  • Cisco Systems 78-15328-01 - page 469

    2-425 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port qos t rust Relat e d Commands set port qos set port qos cos show port qo s show qos inf o ...

  • Cisco Systems 78-15328-01 - page 470

    2-426 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set p ort qos trust -device set port qos trust-device T o co nfigure the t ru st mode on a por t on a spe cific device or modu le, us e t he set port qos trust-de vice comm and. set port qos mod/ports... ...

  • Cisco Systems 78-15328-01 - page 471

    2-427 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port q os trust-ext set port qos trust-ext T o conf igure the a ccess port on a Cisco I P phone conn ected to the s witch por t, use the set port qos trust- ext com mand . set port qos mod/ports.. ...

  • Cisco Systems 78-15328-01 - page 472

    2-428 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set port rsv p ds bm-ele ction set port rsvp dsbm-election To specif y whether or not the swi tch participa tes in the Designated S ubnet Bandwidth Manage r (DSBM) elec tio n on th at par ti cula r se gm ...

  • Cisco Systems 78-15328-01 - page 473

    2-429 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port security set port security T o con figure p or t se cur it y o n a por t or r ange of po rts, use th e set p o rt se cu ri ty command . set po rt s ec u rity mod [ /port... ] [ enable | disab ...

  • Cisco Systems 78-15328-01 - page 474

    2-430 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set po rt secur ity • Shutdown time is indefinite. • T imer type is set to absolute aging. • Unicast floodi ng is enabled. The autom atic conf iguration featur e is disable d . Comma nd T ypes Sw i ...

  • Cisco Systems 78-15328-01 - page 475

    2-431 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port security This e x ample sho ws how to set port security with a specif ic MA C address: Console> (enable) set port security 3/1 enable 00-02-03-04-05-06 Port 3/1 port security enabled with ...

  • Cisco Systems 78-15328-01 - page 476

    2-432 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set po rt speed set port speed T o conf igure the sp eed of a port interf ace, use the set port speed command. set port spee d mod/ port { 10 | 100 | 1000 | auto } Syntax D escr i pti on Defaults The def ...

  • Cisco Systems 78-15328-01 - page 477

    2-433 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port sync-restart-delay set port sync-restart-del ay T o s pecify the s ynchr oni zati on re sta rt d ela y of a por t, use t he s et port sync- res tart-dela y com mand . set p ort sync -r esta r ...

  • Cisco Systems 78-15328-01 - page 478

    2-434 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set po rt trap set port trap T o enab l e or disab le t he ope rat ion of the st anda rd Simple N etwo rk M anag emen t Prot ocol (SN M P) link trap (up or down) for a por t or range of ports, use th e s ...

  • Cisco Systems 78-15328-01 - page 479

    2-435 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port unicast -flood set port unicast-fl ood T o configure t he swit ch to drop Unicast Flood traffic on an Ether net port, use the set po rt unicast-flood comm and. set port unicast-flood mod/ por ...

  • Cisco Systems 78-15328-01 - page 480

    2-436 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set p ort uni c a s t- fl ood This exam ple sh ows how to disab le unic ast floo d tr affic on modu l e 4, po rt 1 of a switc h: Console> (enable) set port unicast-flood 4/1 enable Unicast Flooding is ...

  • Cisco Systems 78-15328-01 - page 481

    2-437 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port vo ice inter face dh cp set port voice interface dhcp T o set t he port v oice interf ace for the DHCP , TFTP , and D NS server s, use the set po rt voi ce in t er fa ce dhcp comma nd. set po ...

  • Cisco Systems 78-15328-01 - page 482

    2-438 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set port voi ce i nterface dhcp Exam ples This example sho ws how to enable the port v oice interf ace for the DHCP server: Console> (enable) set port voice interface 7/4-8 dhcp enable Port 7/4 DHCP e ...

  • Cisco Systems 78-15328-01 - page 483

    2-439 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set power r edundancy set power redundan cy T o tu rn redun da ncy betw een the p ower suppl ies on or o ff, use the set power r edundancy command. set power re dundancy { enable | disable } Syntax De ...

  • Cisco Systems 78-15328-01 - page 484

    2-440 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set prompt set prompt T o change the prompt for the CLI, use the set prompt com mand. set prompt pr ompt_ stri ng Syntax D escr i pti on Defaults The de fault is the prom pt is set to Console >. Comma ...

  • Cisco Systems 78-15328-01 - page 485

    2-441 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set protocolfilt er set protocol filter T o acti vate or deact iv ate protocol filte ring on Ether net VLANs and on nontrunk ing Ethernet, Fast Ether net, and Gigabit Et hern et port s, use the set pr ...

  • Cisco Systems 78-15328-01 - page 486

    2-442 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set pv lan set pvlan T o bind the iso lated or communit y VLAN to the prim ary VLAN and assign the is olated or community ports to the pri vat e VLAN, use the set pvlan comma nd . set pvlan pri mary _vla ...

  • Cisco Systems 78-15328-01 - page 487

    2-443 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set pvlan Exam ples Th is example shows ho w to map VLA Ns 901, 902 , and 903 (isolated or commu nity VLA Ns) to VLA N 7 (the p rima ry V L AN) : Console> (enable) set pvlan 7 901 4/3 Port 4/3 is s ...

  • Cisco Systems 78-15328-01 - page 488

    2-444 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set pvlan ma pping set pvlan mapping T o map isolated or commun ity VLANs to the primary VL AN on the promiscuous port, use the set pvlan mapping comm an d. set pvlan mapping prim ary_v lan { isol ated_v ...

  • Cisco Systems 78-15328-01 - page 489

    2-445 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set pvla n mapping Relat e d Commands clear pvlan mapping clea r vlan set pvlan set vlan show pvlan show pvlan mapping show vlan ...

  • Cisco Systems 78-15328-01 - page 490

    2-446 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set qo s set qos T o turn o n or turn of f QoS functionality o n the swi tch, use the set qos command . set qos enable | disable Syntax D escr i pti on Defaults The default is QoS functionalit y is disab ...

  • Cisco Systems 78-15328-01 - page 491

    2-447 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos acl default-action set qos acl defau lt-action T o set t he ACL default actions, use the set qos acl default-action command. set qos acl default-action ip {{ dscp dscp } | trust-cos | trust-ip ...

  • Cisco Systems 78-15328-01 - page 492

    2-448 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set q os a c l d efa ult- a cti on This exampl e shows ho w to set up the IPX AC L defaul t action s: Console> (enable) set qos acl default-action ipx dscp 5 microflow micro aggregate agg QoS default- ...

  • Cisco Systems 78-15328-01 - page 493

    2-449 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos acl ip set qos acl ip T o cre ate or add IP a ccess lists , use th e set qos acl ip comm and. set qos acl ip { acl_ name } {{ dscp ds cp } | t rust-c os | trust- ipprec | trust-dscp } [ microf ...

  • Cisco Systems 78-15328-01 - page 494

    2-450 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set qo s acl ip Defaults The def ault is there ar e no A CLs. Comma nd T ypes Sw itch co mman d. Command Mode s Pri vile ged. Usage Guid el i nes Configurations yo u make by entering any of these c omman ...

  • Cisco Systems 78-15328-01 - page 495

    2-451 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos acl ip The optio nal micr oflow micr ofl ow _na me an d aggrega te aggr egate_name key word s and v ariables ar e used to c o nf igure polici ng i n the A CE. Refer to the Ca talyst 650 0 Seri ...

  • Cisco Systems 78-15328-01 - page 496

    2-452 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set qo s acl ip If the oper ator is positione d after the source a nd source- wildcard, it must match the so urce port. I f the operator is positioned after the destination an d destination- wildca rd, i ...

  • Cisco Systems 78-15328-01 - page 497

    2-453 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos acl ip This example shows ho w to de fine an ICMP access li st: Console> (enable) set qos acl ip icmp_acl trust-dscp my-micro icmp 1.2.3.4 255.255.0.0 172.20.20.1 255.255.255.0 precedence 3 ...

  • Cisco Systems 78-15328-01 - page 498

    2-454 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set qo s acl ipx set qos acl ipx T o defin e IPX access lists, use the set qos acl ipx command. set qos acl ipx { acl _name } { dscp dsc p | tru st-cos } [ aggregate aggr egate_name ] { p r otoc ol } { s ...

  • Cisco Systems 78-15328-01 - page 499

    2-455 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos acl ipx The optio nal aggregate aggr e ga te_nam e keyword and variable ar e used to configure polici ng in the A CE. Refer to the Catalyst 6500 Series Swi tch Software Co nfigur a tion Guide ...

  • Cisco Systems 78-15328-01 - page 500

    2-456 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set qo s acl ipx Exam ples Th is exam pl e s h ows how to cr ea t e an I P X A CE: Console> (enable) set qos acl ipx my_IPXacl trust-cos aggregate my-agg -1 my_IPXacl editbuffer modified. Use `commit& ...

  • Cisco Systems 78-15328-01 - page 501

    2-457 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos acl mac set qos acl mac T o define MAC access lists, use th e se t qos acl mac comman d. set qos acl mac { ac l_name } { dscp dscp | trust- cos } [ aggregate aggr e g ate_nam e ] { src_mac_add ...

  • Cisco Systems 78-15328-01 - page 502

    2-458 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set qo s acl mac • Case sensiti ve • Cannot be a num be r • Must n ot be a keyword; keywords to avoid are al l, de fault-a ction , map, hel p, a nd edi tbuffer The src_mac_addr_sp ec is a 48-bi t s ...

  • Cisco Systems 78-15328-01 - page 503

    2-459 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos acl map set qos acl map T o atta ch an A CL to a specified port or VLAN, us e the set qos acl map comman d. set qos acl map acl_na me { mod/po rt | vlan } Syntax Descript ion Defaults Ther e a ...

  • Cisco Systems 78-15328-01 - page 504

    2-460 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set qo s acl map Relat e d Commands clea r qos acl commit ro llback show qos acl map ...

  • Cisco Systems 78-15328-01 - page 505

    2-461 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos autoqos set qos autoqos T o apply automat ic QoS settings to all ports on the switch , use the set qos autoqos command. set qos a utoqos Syntax Descript ion This c omm and ha s no a rgume nts ...

  • Cisco Systems 78-15328-01 - page 506

    2-462 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set q os b r id ged -m ic rof low- pol icin g set qos bridged-microflow-polic ing T o enable or disabl e microfl ow policing of bridge d packets on a per-VLAN ba sis, use the set qos bridged-micr o flow- ...

  • Cisco Systems 78-15328-01 - page 507

    2-463 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos cos- dscp-map set qos cos-dsc p-map To set the CoS-to-DSCP mapping, use th e set qos cos-dscp-ma p command. set qos cos- dscp-map dsc p1 dscp2... d scp 8 Syntax Descript ion Defaults The def a ...

  • Cisco Systems 78-15328-01 - page 508

    2-464 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set qos drop- thres hol d set qos drop-threshold T o p rogram t he tr ansmi t-queu e an d rece iv e -que ue drop threshol ds on all p orts in the system, use th e set qos drop-thr eshold command. set qos ...

  • Cisco Systems 78-15328-01 - page 509

    2-465 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos drop- threshold The number pr eceding the q letter in the port type dete rmines the number of t he queues that the har dware supports. For exampl e, wi th 2q2 t , the number of queues specif i ...

  • Cisco Systems 78-15328-01 - page 510

    2-466 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set qos ds cp-cos- map set qos dscp-c os-map To set the DSCP-to-CoS mapping, use the set qos dscp-cos-map command . set qos dscp -cos- map dscp_list:cos_ value ... Syntax D escr i pti on Defaults The def ...

  • Cisco Systems 78-15328-01 - page 511

    2-467 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qo s ipp rec -d sc p- ma p set qos ipprec -dscp-map T o set t he IP prece denc e-to-DSCP map, u se th e set qos ipprec-dscp-map comm and. This c ommand applies to all pack ets and all ports. set q ...

  • Cisco Systems 78-15328-01 - page 512

    2-468 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set qos ip prec -ds cp-map Exam ples Th is exampl e sh ows how to assign I P pr ece de nce- to-D SCP mappi ng a nd r etur n to the d efault : Console> (enable) set qos ipprec-dscp-map 20 30 1 43 63 12 ...

  • Cisco Systems 78-15328-01 - page 513

    2-469 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos mac-cos set qos mac-c os T o set the Co S value to the M A C addre ss an d VLAN pa ir, use the set qos mac-cos co mman d. set qos mac- cos dest _mac vlan cos Syntax Descript ion Defaults Thi s ...

  • Cisco Systems 78-15328-01 - page 514

    2-470 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set qo s map set qos map T o map a specif ic CoS value to the transmit- or r ecei ve-pri ority queues an d the thresholds per a vail able priority queue for all ports , use the set qos map comma nd. set ...

  • Cisco Systems 78-15328-01 - page 515

    2-471 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos map Comma nd T ypes Sw itch co mman d. Command Mode s Pri vile ged. Usage Guid el i nes If you ent er the se t qos map port _type tx | rx q# cos coslist command, the follo wing is a list of po ...

  • Cisco Systems 78-15328-01 - page 516

    2-472 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set qo s map This example shows ho w to ma p the CoS value 5 to strict-p riority t ransmit- queue 3/dro p-thr eshold 1: Console> (enable) set qos map 1p2q2t tx 3 1 cos 5 Qos tx strict queue and thresh ...

  • Cisco Systems 78-15328-01 - page 517

    2-473 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qo s p olic ed-d s cp- map set qos policed -dscp-map T o set the m apping of p oliced in -profile DSCPs , use the set qos policed-dscp-map command. set qos policed-dscp-map [ normal | excess ] in_ ...

  • Cisco Systems 78-15328-01 - page 518

    2-474 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set qo s polic er set qos policer T o c rea t e a po li ci ng rule f or ACL, us e t he set qos policer co mman d. set qos policer { microflow micr oflow_ name } { rate rate } { bu rst burs t } { drop | p ...

  • Cisco Systems 78-15328-01 - page 519

    2-475 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos policer When b oth n ormal a nd exce ss rate s are zero, you c an spec ify an y bur st size. If the no rmal r ates a nd excess ra tes are zero, the valu e is ignored and set internally b y har ...

  • Cisco Systems 78-15328-01 - page 520

    2-476 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set qo s polic er Relat e d Commands clear qos po licer show qos poli cer ...

  • Cisco Systems 78-15328-01 - page 521

    2-477 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qo s policy-s ource set qos policy-source T o set t he QoS polic y source, use th e set qos policy-source com mand. set qos policy- source local | cops Syntax Descript ion Defaults The def a ult i ...

  • Cisco Systems 78-15328-01 - page 522

    2-478 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set qos po lic y-sou rce This example shows the output i f you attempt to set the policy source to COPS-PR and no COPS-PR serv ers are a vailab le: Console> (enable) set qos policy-source cops QoS pol ...

  • Cisco Systems 78-15328-01 - page 523

    2-479 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos rsvp set qos rsvp T o turn on or turn of f the RSVP feature on the switch, to set the time in minutes after which the RSVP databases get flushed (when the policy serv er dies), and to set t h ...

  • Cisco Systems 78-15328-01 - page 524

    2-480 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set qo s rsvp This e x ample sho ws how to set t he polic y timeout interv al: Console> (enable) set qos rsvp policy-timeout 45 RSVP database policy timeout set to 45 minutes. Console> (enable) Thi ...

  • Cisco Systems 78-15328-01 - page 525

    2-481 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos rxq- ratio set qos rxq-ratio T o set the amount of pa cket b uffer m emory allocated to h igh-priori ty incoming traf fic and lo w-priority incomin g traf fic, use the set qos rxq-ratio comman ...

  • Cisco Systems 78-15328-01 - page 526

    2-482 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set qos rxq-ra tio Exam ples This e xample s ho ws ho w to set t h e rece ive-queue s ize rati o: Console> (enable) set qos rxq-ratio 1p1q0t 80 20 QoS rxq-ratio is set successfully. Console> (enabl ...

  • Cisco Systems 78-15328-01 - page 527

    2-483 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos statistics export set qos statistics ex port T o globally enable or disable statistics dat a gathering from hardw a re, use the set qos statistics export comm and. set qos statist ics export { ...

  • Cisco Systems 78-15328-01 - page 528

    2-484 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set qos sta ti st ic s expor t agg regate set qos statistics ex port aggreg ate T o enable or disable statistics data export on an aggre gate policer, u se the set qos statistics exp ort aggregate comm a ...

  • Cisco Systems 78-15328-01 - page 529

    2-485 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos statistics export destinat ion set qos statistics ex port destinatio n T o specify the statisti cs data export dest ination address, use the set qos statistics export destination comm and. set ...

  • Cisco Systems 78-15328-01 - page 530

    2-486 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set q os sta ti st ics e x por t in te rva l set qos statistics export interval T o specify ho w often a p ort or aggre gate policer statistics data is read and e xported, u se t h e set qo s statistics ...

  • Cisco Systems 78-15328-01 - page 531

    2-487 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos stati stics export port set qos statistics ex port port T o enable or disa ble statist ics data expor t on a por t, u s e t h e set qos statis tics ex port po rt comm and. set qos statist ics ...

  • Cisco Systems 78-15328-01 - page 532

    2-488 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set qo s txq -rati o set qos txq-ratio T o set the amount of pack et b uf fer memory allo cated to high -priority tra f f ic and lo w-priority traf fic, use the set qos txq-ra tio comma nd. set qos t xq- ...

  • Cisco Systems 78-15328-01 - page 533

    2-489 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos txq-ratio Exam ples Th is e xample shows ho w to set the transmit-queue size ratio: Console> (enable) set qos txq-ratio 2q2t 75 25 QoS txq-ratio is set successfully. Console> (enable) Re ...

  • Cisco Systems 78-15328-01 - page 534

    2-490 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set qo s wred set qos wred T o configure th e WRED thr eshold para meter s for the specified por t type, use th e set qos wred comm an d. set qos wred port_ type [ tx ] queue q# {[ thr1Lo :] th r1Hi } {[ ...

  • Cisco Systems 78-15328-01 - page 535

    2-491 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos wred Console> (enable) Relat e d Commands clear qos co nf ig show qos inf o ...

  • Cisco Systems 78-15328-01 - page 536

    2-492 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set qo s wrr set qos wrr To specify the weights th at d etermine ho w many pa ckets will transmit out of one queue before switchin g to the othe r queue, use the set qos wr r comm and. set qos wrr por t_ ...

  • Cisco Systems 78-15328-01 - page 537

    2-493 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos wrr Exam ples Th is example shows how to specify the weights for queue 1 and queue 2 to 30 and 70: Console> (enable) set qos wrr 2q2t 30 70 QoS wrr ratio is set successfully. Console> (e ...

  • Cisco Systems 78-15328-01 - page 538

    2-494 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set radius attribute set radius attribute T o set attrib utes to the RADIUS A CCESS_REQUEST pack et, use the set radius attribute comman d. set radius attribute { number | name } in clude-in-access-r eq ...

  • Cisco Systems 78-15328-01 - page 539

    2-495 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set radi us deadti me set radius dea dtime T o set the time to skip RADIUS serv er s that do not re ply to an au thentic ation request , use the set radius deadtime comman d. set radius deadtime minut ...

  • Cisco Systems 78-15328-01 - page 540

    2-496 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set radius key set radius key T o set the encryptio n and authenticatio n for all communi cation betwee n the RADIUS client an d the serv er , use th e set radius key comma nd. set radius key ke y Syntax ...

  • Cisco Systems 78-15328-01 - page 541

    2-497 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set ra dius retrans m it set radius retransmit T o speci fy the numbe r of tim es the RADI US servers are tr ie d be fore giving up on the server , use the set radius retransmit com mand. set radius r ...

  • Cisco Systems 78-15328-01 - page 542

    2-498 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set radius server set radius server T o set up the RA DIU S server, use the set radius ser ver command. set r adi us s erver i paddr [ a uth- port port ] [ ac ct-port po rt ] [ primary ] Syntax D escr i ...

  • Cisco Systems 78-15328-01 - page 543

    2-499 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set ra dius time out set radius timeout T o set the time between retransm issions to the RADIUS server , use the set radius t imeout comman d. set radi us tim eou t secon ds Syntax Descript ion Defaul ...

  • Cisco Systems 78-15328-01 - page 544

    2-500 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set rcp usern ame set rcp username To sp eci fy you r userna m e for r cp f ile tr ans fers, us e th e s et rcp usern ame command. set rcp u sernam e userna me Syntax D escr i pti on Defaults There are n ...

  • Cisco Systems 78-15328-01 - page 545

    Chapter 2 Catalyst 6 500 Series Swi tch and ROM M onitor Commands set r gmp 2-501 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 22 set rgmp T o enab le or dis able the Route r-Por ts Group Ma nageme nt Protoco l (RGMP) fe ature on the swit ch, use the set r gmp command. set rgmp { ena ble | disable } Syntax Descript ion D ...

  • Cisco Systems 78-15328-01 - page 546

    2-502 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set rspan set rspan T o create re mote Switched Port An alyzer ( SP AN) sessions, us e th e set rspan comm and. set rspan disable source [ rspan_vlan | all ] set rpsan disable destination [ mod/po rt | a ...

  • Cisco Systems 78-15328-01 - page 547

    2-503 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set r s pan Defaults The de faults are as fo llows: • Remote SP AN is disabled. • No VLAN f ilterin g. • Monitoring multic ast tr aff ic is enabled. • Learni n g i s en ab led. • inpkts is d ...

  • Cisco Systems 78-15328-01 - page 548

    2-504 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set rspan Exam ples Th is exampl e sh ows how to disab le al l en able d sour ce s ession s: Console> (enable) set rspan disable source all This command will disable all remote span source session(s). ...

  • Cisco Systems 78-15328-01 - page 549

    2-505 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set secur ity acl adj acency set security acl adjac ency T o set an entry fo r th e adjac ency ta ble, us e the set securi ty acl adja cency command. set sec urit y a cl ad ja cenc y adjacenc y_name d ...

  • Cisco Systems 78-15328-01 - page 550

    2-506 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set sec urity a cl a rp-inspec tion set security acl arp -inspecti on T o configure Ad dress Reso lution Proto col (ARP) inspection fe ature s, use the set secur ity acl arp-inspection comman d. set secu ...

  • Cisco Systems 78-15328-01 - page 551

    2-507 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set security acl arp-inspection Use the set se curity acl arp-inspectio n command in conjun ction w ith the set security acl ip arp-inspection command . For more info rmation about configuring ARP ins ...

  • Cisco Systems 78-15328-01 - page 552

    2-508 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set sec urity a cl c apture-por ts set security acl capt ure-po rts T o set the ports (specif ied with the captur e option in the set security acl ip , set security acl ipx , and set security a cl mac co ...

  • Cisco Systems 78-15328-01 - page 553

    2-509 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set security acl feature ratelimit set security acl featu re ratelimit T o specif y a rate limit for the numb er of pac kets t hat are sen t to the CPU on a global basi s , use the set security acl fe ...

  • Cisco Systems 78-15328-01 - page 554

    2-510 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set secu r it y acl ip set security acl ip T o c reate a n ew en try i n a stan dard IP VA CL a nd ap pend th e ne w en try at th e end of t he VA CL, u se the set security a cl ip command . set security ...

  • Cisco Systems 78-15328-01 - page 555

    2-511 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set security acl ip bef ore editbu ffer_ index (Optional ) Inserts the ne w A CE in front of an other ACE. mod if y editbu ffer_ index (Optional ) Replace s an A C E with the new A C E. log ( O pt i o ...

  • Cisco Systems 78-15328-01 - page 556

    2-512 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set secu r it y acl ip Defaults Ther e are no def ault ACLs an d no defa ult ACL-V LAN ma ppings. By de fault, AR P is enabled. Comma nd T ypes Sw itch co mman d. Command Mode s Pri vile ged. Usage Guid ...

  • Cisco Systems 78-15328-01 - page 557

    2-513 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set security acl ip • Use the ke yword any as an abbrev iation for a sour ce and sou r ce-wil dcar d of 0. 0.0.0 255.2 55.255.25 5. • Use host /sou rce as an a bbreviation for a destination and de ...

  • Cisco Systems 78-15328-01 - page 558

    2-514 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set secu r it y acl ip For IP , you ca n enter the fo llowing synt ax: set security a cl ip { acl_name } { permit | deny | redi re c t { mod_nu m/port _num }} [ ip ] { src_ip_spec } { dest _ip_s pec } [ ...

  • Cisco Systems 78-15328-01 - page 559

    2-515 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set security acl ip Relat e d Commands clea r security acl clear secur ity acl captur e-ports clear s ecurity ac l map commit set security a cl map set secur ity acl captur e-ports show security acl s ...

  • Cisco Systems 78-15328-01 - page 560

    2-516 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set secu r it y acl ipx set security acl ipx T o crea te a new entry in a stan dard I PX V A CL an d to appe nd the n ew entry a t the e nd of the V A CL , use the set security acl ipx command . set secu ...

  • Cisco Systems 78-15328-01 - page 561

    2-517 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set security acl ipx If you use the capture keyword, the ports that captu re the traf fic and t ransmit out are spe cified by ent erin g th e set se c uri t y a cl ca ptu r e-p or ts co mmand . When y ...

  • Cisco Systems 78-15328-01 - page 562

    2-518 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set secu r it y acl ipx Exam ples Th is exampl e sh ows how to bloc k tr aff ic f rom a specified sou rc e IPX addre ss: Console> (enable) set security acl ipx IPXACL1 deny 1.a IPXACL1 editbuffer modi ...

  • Cisco Systems 78-15328-01 - page 563

    2-519 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set security acl log set security acl log T o c on figure th e sec ur i ty ACL log tab l e, us e th e set secur ity acl log comman d. set secu rit y a cl l og maxfl ow max_number set se c uri t y a cl ...

  • Cisco Systems 78-15328-01 - page 564

    2-520 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set secu r i t y acl mac set security acl mac T o cre ate a ne w entr y in a non-IP or non-IPX protocol V A CL and to append the ne w entry a t the end o f the V A CL, use the set secu rity a cl mac comm ...

  • Cisco Systems 78-15328-01 - page 565

    2-521 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set security acl mac • Cannot be a num be r • Must n ot be a keyword; keywords to avoid are al l, default -acti on, ma p, he lp, and e ditbuffer The src_mac_addr_sp ec is a 48-bit source MAC addre ...

  • Cisco Systems 78-15328-01 - page 566

    2-522 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set secu r i t y acl map set security acl map T o map an exi sting V A CL to a VLAN, use the set security ac l map comm and. set security a cl map a cl_name vlan Syntax D escr i pti on Defaults Ther e ar ...

  • Cisco Systems 78-15328-01 - page 567

    2-523 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set security acl map This e xampl e sho ws the output if you try to m ap an A CL that is al ready mapp ed to a VL AN for the A CL type (IP , IPX, or MAC): Console> (enable) set security acl map IPA ...

  • Cisco Systems 78-15328-01 - page 568

    2-524 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set sn mp set snmp T o enable or disable the processing of SNMP requests to the switch and SNMP traps from the switch, use the set snmp comm and. set snmp { en ab le | disable } Syntax D escr i pti on De ...

  • Cisco Systems 78-15328-01 - page 569

    2-525 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set snmp access set snmp access T o d efine th e ac c ess ri ght s of an SN MP group , u se the se t snmp access command . set snmp acc ess [ -hex ] { groupname } { security- model { v1 | v2c }} [ rea ...

  • Cisco Systems 78-15328-01 - page 570

    2-526 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set sn mp acc e ss • write write view is NULL OI D. • notify notifyvie w is NULL OID. • cont ext contextname is a NULL string. Comma nd T ypes Sw itch co mman d. Command Mode s Pri vile ged. Usage ...

  • Cisco Systems 78-15328-01 - page 571

    2-527 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set snmp ac cess-list set snmp access-list T o specify an access lis t number fo r a host or group of host s, use the set snmp ac cess-list command. set snmp acc ess-list a ccess_numb er IP_address [ ...

  • Cisco Systems 78-15328-01 - page 572

    2-528 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set sn mp acc e ss-list Relat e d Commands clear sn mp access-lis t show snmp access-list ...

  • Cisco Systems 78-15328-01 - page 573

    2-529 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s se t s nm p b u ffe r set snmp buffer T o set t h e siz e of the SNM P UDP so cket recei ve b uff er , use the set snm p buffer command. set snmp buffer { pac ket s } Syntax Descript ion Defaults 95 p ...

  • Cisco Systems 78-15328-01 - page 574

    2-530 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set sn mp cha ssis-a lias set snmp chassis-alias T o set t he chassis al ias and sav e it in NVRAM and in the c onfi g uration f ile, use the set snmp chassis-alias command. set snmp chassis-a lias [ cha ...

  • Cisco Systems 78-15328-01 - page 575

    2-531 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set snmp comm unity set snmp community T o set SNMP comm unities and associat ed access type s, use the set snmp community command. set snmp community { rea d - on l y | read-wr ite | read-wr ite-all ...

  • Cisco Systems 78-15328-01 - page 576

    2-532 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set snmp communi ty There are three co nf igurab le SNMP communi ties, one fo r each acce ss type. If you do not sp ecify the comm unity stri ng, the co mmunit y string configur ed for tha t acces s type ...

  • Cisco Systems 78-15328-01 - page 577

    2-533 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set snmp com munity-ext set snmp community-ext T o set a dditional c o mmunity str ings, use the set snmp community-ext command. set snmp community- ext community_string { rea d- o n l y | re a d - w ...

  • Cisco Systems 78-15328-01 - page 578

    2-534 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set snmp community-ext This e xample sho ws how to change the ac cess num ber to the comm unity st ring: Console> (enable) set snmp community-ext private1 read-write access 3 Community string private1 ...

  • Cisco Systems 78-15328-01 - page 579

    2-535 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set snmp e xten ded rmon n etflow set snmp exten dedrmon netfl ow T o enable or disabl e the SNMP extend ed RMON support for t he N AM module , use the set snmp extendedrmon netflow com mand. set snmp ...

  • Cisco Systems 78-15328-01 - page 580

    2-536 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set sn mp group set snmp group T o establi sh the relations hip bet ween an SNMP g rou p and a us e r with a s p ecif ic security mo d el, use th e set snmp group command. set snmp group [ -he x ] { g r ...

  • Cisco Systems 78-15328-01 - page 581

    2-537 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set snmp ifalias set snmp ifalias T o set t he SNMP inte r face alias, us e the set snmp ifalias co mman d. set snmp ifalias { ifIndex } [ ifAlias ] Syntax Descript ion Defaults Thi s command has no d ...

  • Cisco Systems 78-15328-01 - page 582

    2-538 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set sn mp noti fy set snmp notify T o set the notifyname entry in the snmpNotifyT able and the notifytag entry in the snmpT argetAddrT able, use the set snmp notify command. set snmp not ify [ -hex ] { n ...

  • Cisco Systems 78-15328-01 - page 583

    2-539 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set s nmp rm on set snmp rmon T o ena ble or disab le SNMP RM ON support, use the se t snmp rmon comma nd. set snmp rm on { enable | disable } Syntax Descript ion Defaults The default is RMON suppor t ...

  • Cisco Systems 78-15328-01 - page 584

    2-540 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set snmp rm onm e mory set snmp rmonme mory T o set t he memory usage limit in pe rcentage, use th e set snmp rmonmemory command . set snmp rmonmemory per centage Syntax D escr i pti on Defaults The de f ...

  • Cisco Systems 78-15328-01 - page 585

    2-541 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set snmp targetad dr set snmp t argetadd r T o conf igure the SNMP tar get address entr ies in the snmpT arg etAddres sT able, use th e set snmp targetaddr co mmand . set snmp ta rgetaddr [ -he x ] { ...

  • Cisco Systems 78-15328-01 - page 586

    2-542 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set snmp targ etadd r Usage Guid el i nes If you us e speci al char act ers for the addrname, paramsn ame, tag, and tagv al ue (nonprintab le delim iters for th ese p aram ete rs), you m ust u se a hexad ...

  • Cisco Systems 78-15328-01 - page 587

    2-543 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set sn mp targetp arams set snmp targ etparams T o conf ig ure the SNMP parameters used in the snmpT argetP aramsT able when generatin g a message to a target, use the set s nm p ta rget par ams co mm ...

  • Cisco Systems 78-15328-01 - page 588

    2-544 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set snmp targ etpara ms Usage Guid el i nes If you use sp ecial char acters for the paramsname and username (no npri ntable delim iters fo r these paramet ers), yo u must use a hexadeci mal keyword, whi ...

  • Cisco Systems 78-15328-01 - page 589

    2-545 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set snmp trap set snmp trap T o enable or disable t he diffe rent SNMP traps on the system or to add an entry into the SNMP authenti cation trap recei ver ta ble, use the set sn mp tr ap command. set ...

  • Cisco Systems 78-15328-01 - page 590

    2-546 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set sn mp tra p Defaults The def ault is SNMP traps are disabled. Comma nd T ypes Sw itch co mman d. Command Mode s Pri vile ged. Usage Guid el i nes This c omm and is not sup port ed by t he NAM. An IP ...

  • Cisco Systems 78-15328-01 - page 591

    2-547 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set snmp trap Console> (enable) Relat e d Commands clear sn mp trap set port t rap show snmp test snmp trap ...

  • Cisco Systems 78-15328-01 - page 592

    2-548 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set sn mp user set snmp user T o conf igure a ne w SNMP user , us e the se t snmp user co mmand . set snmp user [ -hex ] { usernam e } { rem o t e { engine id }} [ au thenti catio n { md5 | sha | authpas ...

  • Cisco Systems 78-15328-01 - page 593

    2-549 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set snmp user This e xample shows how to se t a specif ic username, authentica tion, and au thpassword: Console> (enable) set snmp user John authentication md5 arizona2 Snmp user was set to John au ...

  • Cisco Systems 78-15328-01 - page 594

    2-550 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set sn mp view set snmp view T o co nf igure the SNMP M IB vie w , us e the set snmp view command. set snmp view [ -hex ]{ viewname }{ subtr ee }[ mask ] [ included | excl uded ] [ volatile | nonvolatile ...

  • Cisco Systems 78-15328-01 - page 595

    2-551 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set snmp view Exam ples Th is exampl e sh ows how to assign a su bt ree to the view pu blic: Console> (enable) set snmp view public 1.3.6.1 included Snmp view name was set to public with subtree 1. ...

  • Cisco Systems 78-15328-01 - page 596

    2-552 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set sp an set span T o enable or disable SP AN and to set up the switch por t and VLAN analyzer for mu ltiple SP AN sessions, use the set span command. set span disable [ dest_m od/dest_p ort | all ] set ...

  • Cisco Systems 78-15328-01 - page 597

    2-553 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set span Usage Guid el i nes After y ou en ab le SP AN , syst em defa ult s a re u sed i f no pa rame ter s w ere ever set. I f y ou ch an ge d parame ters, t he old para meters ar e stored in NVRAM , ...

  • Cisco Systems 78-15328-01 - page 598

    2-554 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set sp an This example shows how to disable SP AN if multi ple SP AN sessio ns are not defined: Console> (enable) set span disable This command WILL disable your span session(s). Do you want to contin ...

  • Cisco Systems 78-15328-01 - page 599

    2-555 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spant ree backb onefast set spantree backbone fast T o en able or disa ble t he span ning tree B ackbo neF ast C on ver gence feat ure, use the set s pan tree backbonefast comman d. set spantr ee ...

  • Cisco Systems 78-15328-01 - page 600

    2-556 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set spantr ee bpdu-f il t er set spantree bpdu-filter T o enable or disable BPDU packet f ilter ing on a por t, use the set spantre e bpdu-f ilter command. set spantr ee bpdu-fil t er mod/ port { enable ...

  • Cisco Systems 78-15328-01 - page 601

    2-557 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spant ree bpdu- guard set spantree bpdu-guard T o ena ble or di sabl e spanning tree BPDU g uard on a port, us e the set spantree bpdu-guard co mman d. set spantr ee bpdu-guard mod/ port { ena ble ...

  • Cisco Systems 78-15328-01 - page 602

    2-558 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set spantr ee bpdu-s ke wing set spantree bpdu-skewin g T o en able or disa ble col lection of t h e sp anning tree BPDU sk ewi ng detect ion statist ics, u se the set spantree bpdu-skew ing command. set ...

  • Cisco Systems 78-15328-01 - page 603

    2-559 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set s pan tre e cha nne lco st set spantree channelco st T o set t he channel p ath cost and to auto matically a djust the cha nnel port costs, use the set spantree channelcost command . set spant ree ...

  • Cisco Systems 78-15328-01 - page 604

    2-560 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set spantr ee chann elcost Relat e d Commands clear la cp-channel stati stics set channelpr otocol set lacp-channel sy stem-pr iority set port lacp-channel set spant ree cha nnelvlancos t show l acp-chan ...

  • Cisco Systems 78-15328-01 - page 605

    2-561 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spantree c hannelvlanc ost set spantree channelvla ncost T o set the channel VLAN path cost an d adjust the port VLAN costs of the por ts that belong to the chan ne l, u se th e set spant re e cha ...

  • Cisco Systems 78-15328-01 - page 606

    2-562 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set spantr ee defau lt cos tmode set spantree defaultcostmode T o s peci fy t he s pan ning tre e defau lt por t c ost m ode, us e the se t spa ntree de fault co stmode com mand . set span tree de fault ...

  • Cisco Systems 78-15328-01 - page 607

    2-563 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spantree defaultcostmode Exam ples Th is exampl e sh ows how to set th e spanni ng tr ee d efaul t po rt cost mod e: Console> (enable) set spantree defaultcostmode long Portcost and portvlancos ...

  • Cisco Systems 78-15328-01 - page 608

    2-564 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set spa ntree disa ble set spantree disable T o disabl e the spanni ng tree alg orithm for all VLANs or a specif ic VLAN or dis able span ning tre e inst an ce , us e th e set spa ntree disable command. ...

  • Cisco Systems 78-15328-01 - page 609

    2-565 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spant ree disable This e x ample sho ws how to disable span ning tree fo r a specif ic instance: Console> (enable) set spantree disable mistp-instance 2 MI-STP instance 2 disabled. Console> ...

  • Cisco Systems 78-15328-01 - page 610

    2-566 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set spantr ee enabl e set spantree enabl e T o enable th e spanning tree alg orithm for all VLANs, a specif ic VLAN, a specif ic instance, or all inst an ce s, us e th e set spantr ee enable command. set ...

  • Cisco Systems 78-15328-01 - page 611

    2-567 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spantr ee enable Relat e d Commands set spantree disable show spantr ee ...

  • Cisco Systems 78-15328-01 - page 612

    2-568 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set spantr ee fwddel ay set spantree fwddelay T o set the bridge for ward delay for a VLAN or an instance, use the set spantre e fwddelay command. set span tree fwdd el ay de lay [ vlans ] set span tree ...

  • Cisco Systems 78-15328-01 - page 613

    2-569 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spantree fwddelay This e xample shows ho w to set the bridge for ward delay for the IST and all MST instance s to 15 seconds: Console> (enable) set spantree fwddelay 15 mst MST forward delay se ...

  • Cisco Systems 78-15328-01 - page 614

    2-570 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set spantr ee globa l-d efault set spantree globa l-default T o s et the gl ob al s tat es on the sw it ch, use th e set spa ntree globa l-def ault command. set sp antr ee glob al-defa ult portfa st { en ...

  • Cisco Systems 78-15328-01 - page 615

    2-571 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spantr ee global -default This exampl e shows ho w to disabl e the global BPDU filter state on the switch: Console> (enable) set spantree global-default bpdu-filter disable Spantree global-defa ...

  • Cisco Systems 78-15328-01 - page 616

    2-572 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set spantr ee guard set spantree guard T o enabl e or disab le the spa nning tr ee root gua rd or loop gua rd feat ure on a per-port basis, use t he set spantree guar d command. set spantree gua rd { non ...

  • Cisco Systems 78-15328-01 - page 617

    2-573 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spantree guard Exam ples Th is exampl e sh ows how to en abl e r oot gua rd : Console> (enable) set spantree guard root 5/1 Rootguard on port 5/1 is enabled. Warning!! Enabling rootguard may re ...

  • Cisco Systems 78-15328-01 - page 618

    2-574 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set s pan tr ee h e llo set spantree hello T o set the bridge hello time for a VLAN or an instance, use the set spantree hello command . set spantree hello interval [ vlans ] set spantree hello interval ...

  • Cisco Systems 78-15328-01 - page 619

    2-575 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spantree hello This example sho ws how to set the spantree hello time for an instance to 3 seconds: Console> (enable) set spantree hello 3 mistp-instance 1 Spantree 1 hello time set to 3 second ...

  • Cisco Systems 78-15328-01 - page 620

    2-576 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set s pan tr ee li nk - ty pe set spantree link-type T o conf ig ure the link type of a port , use the set spantr ee link-type command . set span tree lin k-ty pe mod/po rt { auto | poin t-to -point | sh ...

  • Cisco Systems 78-15328-01 - page 621

    2-577 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spantr ee macreducti on set spantree macreduction T o enab le or disa ble the sp anning tree MA C addr ess redu ction feature , use the set spantre e macr educti on comman d. set spantr ee macredu ...

  • Cisco Systems 78-15328-01 - page 622

    2-578 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set spantr ee maxage set spantree maxage T o set the bridge max imum aging time for a VLAN or an instan ce, use the set spantree maxage comm and. set spantree max age agi ngtime [ vlan s ] set spantree m ...

  • Cisco Systems 78-15328-01 - page 623

    2-579 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spantree maxa ge This exampl e shows ho w to set the ma ximum ag ing time fo r an insta nce to 25 sec onds: Console> (enable) set spantree maxage 25 mistp-instance 1 Instance 1 max aging time s ...

  • Cisco Systems 78-15328-01 - page 624

    2-580 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set sp antree m ode set spantree mode T o configure the type of Sp anning T ree Proto col mode to run, use the set spantree mode comman d. set spantree mode { mistp | pvst+ | mistp-pvst+ | mst | rapid-pv ...

  • Cisco Systems 78-15328-01 - page 625

    2-581 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spant ree mo de If yo u ch a n g e the sp ann ing tree mode from PVST + to MISTP or MI S T P t o P V S T + , the STP mode previously running stops, all the in for m ation co llected at runtime is ...

  • Cisco Systems 78-15328-01 - page 626

    2-582 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set sp antree mst set spantree mst T o conf ig ure the mapping of VLANs to an MST instance , use the set spantree mst command . set spantree mst instance vlan vlan Syntax D escr i pti on Defaults Thi s c ...

  • Cisco Systems 78-15328-01 - page 627

    2-583 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spantree mst config set spantree mst config T o change the MST region informatio n, use the set spantree mst config co mmand. set spant ree mst co nf ig [ name name ] [ revision number ] set spant ...

  • Cisco Systems 78-15328-01 - page 628

    2-584 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set spantr ee mst co nfi g Exam ples Th is example shows ho w to configure an M ST region an d to giv e that regio n a name and revision number: Console> (enable) set spantree mst config name test-lab ...

  • Cisco Systems 78-15328-01 - page 629

    2-585 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spantree mst link-type set spantree mst link-type T o conf ig ure the link type of a port , use the set spantree mst link-type co mmand . set span tree mst li nk-ty pe mod/po rt { auto | p oint -t ...

  • Cisco Systems 78-15328-01 - page 630

    2-586 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set spantr ee mst max hops set spantree mst maxhops T o s et th e spa nnin g tr ee h op co unt , us e th e set spantree mst ma xhops co mman d. set spantree mst max hops ma xhops Syntax D escr i pti on D ...

  • Cisco Systems 78-15328-01 - page 631

    2-587 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s se t sp a nt r ee ms t vl a n set spantree mst vlan T o conf ig ure the mapping of VLANs to an MST instance , use the set spantree mst v lan command. set spantree mst instance vlan vlan Syntax Descrip ...

  • Cisco Systems 78-15328-01 - page 632

    2-588 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set sp antree p ortco st set spant ree port cost T o set the path cost for a por t, use the set span tree port cos t comma nd. set spant ree po rtcost mod/port co st [ mst ] Syntax D escr i pti on Defaul ...

  • Cisco Systems 78-15328-01 - page 633

    2-589 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set sp ant ree po rt cost Comma nd T ypes Sw itch co mman d. Command Mode s Pri vile ged. Usage Guid el i nes If the spanning tree mod e is sh ort and l ong or MI STP , valid cost values a re from 1 t ...

  • Cisco Systems 78-15328-01 - page 634

    2-590 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set sp antre e port fast set spantree port fast T o allo w a port that is connected to a single workstatio n or PC to start faster when it is connec ted, use the set spantree portfast command. set spantr ...

  • Cisco Systems 78-15328-01 - page 635

    2-591 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spantree portfast This exam ple sh ows how to en able th e spanni ng t ree Po rtFast-s tart fe atu re on the tr unk port : Console> (enable) set spantree portfast 3/2 enable trunk Warning: Conn ...

  • Cisco Systems 78-15328-01 - page 636

    2-592 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set spantr ee portfas t bpdu-fi lt er set spantree portfast bp du-filter T o ena ble o r di sab le spanni ng t ree Po rtFast BPDU packe t filtering on a port , us e the set s p antree portfast bpdu-f ilt ...

  • Cisco Systems 78-15328-01 - page 637

    2-593 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set span tree portfa st bpdu-guard set spantree portfast bp du-guard T o ena ble o r di sab le spanni ng t ree Po rtFast BPDU guard o n a por t, u se the se t spantree portfas t bpdu-guard comman d. s ...

  • Cisco Systems 78-15328-01 - page 638

    2-594 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set spantr ee portins tancecos t set spantree port instanceco st T o assign the pa th cost of t he port for the sp ecified in stances , use the set spantre e portinstanceco st comm and. set spantr ee por ...

  • Cisco Systems 78-15328-01 - page 639

    2-595 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spant ree porti n stancecost Exam ples Th ese exampl es show how to use th e set spantree portinstancecost command and explic itly specify the path cost of a port : Console> (enable) set spantr ...

  • Cisco Systems 78-15328-01 - page 640

    2-596 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set spantr ee portins tancepri set spantree portinstan cepri T o set the p ort prior ity for inst ances in th e trunk port, use the set spantree portinstancepri comman d. set spant ree port instancepri m ...

  • Cisco Systems 78-15328-01 - page 641

    2-597 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spantree portinstancepri This exampl e shows ho w to set the por t priori ty for mod ule 8, port 1, on MST inst ance 2 : Console> (enable) set spantree portinstancepri 8/1 31 mst 2 Port 8/1 ins ...

  • Cisco Systems 78-15328-01 - page 642

    2-598 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set spantr ee portp ri set spant ree port pri T o s et the brid ge pr iori ty for a s pa nning t ree po rt, use t h e set spantree portpri command. set spant ree po rtpri mod/port priority [ mst ] Syntax ...

  • Cisco Systems 78-15328-01 - page 643

    2-599 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set sp ant re e po rtv l an cos t set spantree port vlancost T o assign a lower path cost to a set of VLANs on a port , use the set spantree port vlancost command. set spantr ee por tvlancost mod/po r ...

  • Cisco Systems 78-15328-01 - page 644

    2-600 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set spa ntr ee portv la ncost Command Mode s Pri vile ged. Usage Guid el i nes Follow these guidel ines wh en you set th e path cost for VLANs on a port: • The cost va lue specified is used as the path ...

  • Cisco Systems 78-15328-01 - page 645

    2-601 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set sp ant re e po rtv l an cos t Relat e d Commands clear s pantr ee portvlancost set ch anne l vlanc ost show spantr ee ...

  • Cisco Systems 78-15328-01 - page 646

    2-602 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set spantr ee portvla npri set spantree portvlanpri T o set the p ort prior ity for a subset of VLANs in the tru nk port , use th e set spantree portvl anpri comm and. set spant ree port vlanpri mod/port ...

  • Cisco Systems 78-15328-01 - page 647

    2-603 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spantree p ortvlanpri Relat e d Commands clear s pantr ee portvl anpri show spantr ee ...

  • Cisco Systems 78-15328-01 - page 648

    Chapter 2 Catalyst 6 500 Series Swi tch and ROM M onitor Commands set spantree priority 2-604 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 22 set spantree priority T o set the bri dge pri ority for a VLAN or an inst ance whe n PVST+ or MI STP is runnin g, use the set spantree priority command . set spantree priorit y bri ...

  • Cisco Systems 78-15328-01 - page 649

    2-605 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spantree priority This exam ple sh ows how to set the br idge pri orit y fo r M ST inst anc e 0: Console> (enable) set spantree priority 28672 mst 0 MST Spantree 0 bridge priority set to 28672. ...

  • Cisco Systems 78-15328-01 - page 650

    2-606 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set sp antree r oot set spantree root T o set the primary o r secondar y root fo r specifi c VLANs, all VLANs of the switc h, or a n instance, u se the set spantree root command . set spantree root [ sec ...

  • Cisco Systems 78-15328-01 - page 651

    2-607 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spantree root The set spa ntree root brid ge priorit y value is 16384, except when M A C re ducti on or MISTP are enabled, the n the valu e is 24576. This c omm and incr e ases p ath co sts to a v ...

  • Cisco Systems 78-15328-01 - page 652

    2-608 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set sp antree r oot These ex amples sho w that setting the b ridge priority to 819 2 was not suf fi cient to make th is switch the root. The prio rity was furth er reduced to 7192 (100 le ss than the cur ...

  • Cisco Systems 78-15328-01 - page 653

    2-609 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spantree uplinkfast set spantree uplinkfast T o enab le fast switcho ver to alter nate ports when the root po rt f ails, use the set spantr ee uplinkfast command. This command a pplies to a switch ...

  • Cisco Systems 78-15328-01 - page 654

    2-610 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set spantr ee uplinkf ast Y ou do no t have to turn on the all-pr otoc ols fe atu re on Catal yst 6500 ser ies sw itche s t hat h ave both the UplinkFas t a nd pro t oco l filtering f eat ur es en ab led ...

  • Cisco Systems 78-15328-01 - page 655

    2-611 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set summertime set summertime T o spec i fy whet he r the sys tem s houl d set the clock ah ead o ne hou r du ring daylight saving t ime, us e the set summertime command. set summertime { enable | dis ...

  • Cisco Systems 78-15328-01 - page 656

    2-612 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set su mmertim e Exam ples Th is exampl e shows how to caus e the syst em t o set the clock ahea d one ho ur du ring da ylight s aving time: Console> (enable) set summertime enable PDT Summertime is e ...

  • Cisco Systems 78-15328-01 - page 657

    2-613 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set system baud set system baud T o set th e console port ba ud rate, u se the set syst em baud comman d. set system ba ud ra te Syntax Descript ion Defaults The de fault is 9600 bau d. Comma nd T ype ...

  • Cisco Systems 78-15328-01 - page 658

    2-614 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set system con tact set system contact T o id en ti f y a co ntac t p er s on for t h e sys te m, us e th e set sy stem cont act co mmand . set system cont act [ cont act_string ] Syntax D escr i pti on ...

  • Cisco Systems 78-15328-01 - page 659

    2-615 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set system core- dump set system core-dump T o enable or disable t he core dump feature, use the set system core-dump comman d. set system c ore-dump { ena ble | disable } Syntax Descript ion Defaults ...

  • Cisco Systems 78-15328-01 - page 660

    2-616 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set system cor e-file set system core-file To specify the cor e image filename, use t h e set s ys te m core- file comm and. set system c ore-file { de vice :[ f ilename ]} Syntax D escr i pti on Default ...

  • Cisco Systems 78-15328-01 - page 661

    2-617 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set system countryco de set system countryco de T o s peci fy t he c ou ntry w here the syste m is physi ca lly loc ated, us e the set syste m countrycode comm and. set system c ountryco de code Synta ...

  • Cisco Systems 78-15328-01 - page 662

    2-618 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set system cro ssbar -fa llback set system crossbar-fal lback T o selec t the ac tion tak en when the Switch Fabr ic Module fails, u se the set syst em crossbar -fallbac k comm and. set system crossbar-f ...

  • Cisco Systems 78-15328-01 - page 663

    2-619 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set system highava ilability set system highavailability T o enable or disable h igh system a vai lability for the switc h , us e the set system highav ailability comm an d. set system higha vailabili ...

  • Cisco Systems 78-15328-01 - page 664

    2-620 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set syst em higha vailabi lity ve rsi oning set system highavailability versioning T o ena ble an d di sabl e su ppo rt f or sup ervi sor engi ne im age versio nin g, use t h e set sy stem higha vailabil ...

  • Cisco Systems 78-15328-01 - page 665

    2-621 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set system highavailability versioning Exam ples This example sho ws how to enable high-av ailability v ersioning: Console> (enable) set system highavailability versioning enable Image versioning e ...

  • Cisco Systems 78-15328-01 - page 666

    2-622 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set sy stem locati on set system location T o identify the location of the system, use the set sy stem l oca tion command. set system lo cation [ location_string ] Syntax D escr i pti on Defaults Thi s c ...

  • Cisco Systems 78-15328-01 - page 667

    2-623 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set s yst em m o dem set system modem T o enable or disable mo dem cont rol lines on the consol e port, use the set system modem comman d. set system mo dem { en a b le | disable } Syntax Descript ion ...

  • Cisco Systems 78-15328-01 - page 668

    2-624 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set sy stem name set system name T o conf igure a name for the system, us e the set system name command. set system na me [ name_st ring ] Syntax D escr i pti on Defaults The de fault is no system na me ...

  • Cisco Systems 78-15328-01 - page 669

    2-625 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set system super visor-upd ate set system supervisor-update T o con figure t he Er asa ble Progr am mabl e L ogic Device (E PLD) upg rade p roce ss, use the set syst em supervisor -update comma nd. se ...

  • Cisco Systems 78-15328-01 - page 670

    2-626 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set syst em su per viso r-updat e This exam ple sh ows how to disab le EPL D up gra des : Console> (enable) set system supervisor-update disable Supervisor EPLD update during reset is disabled. Consol ...

  • Cisco Systems 78-15328-01 - page 671

    2-627 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set system switchmode allow set system switchmode allow T o conf igure the switch ing mode fo r the system, use the set system switchmode allow command. set system switchmode allow { truncated | bus-o ...

  • Cisco Systems 78-15328-01 - page 672

    2-628 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set sy stem switch mode a llo w This example sho ws how to set the switching mode to bu s-only: Console> (enable) set system switchmode allow bus-only System switchmode allow set to bus-only. Console& ...

  • Cisco Systems 78-15328-01 - page 673

    2-629 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set system syslog-dump set system syslog-dump T o write system messag es in the syslog bu ffer to a flash f ile before the system fail s, use the set system syslog-dump co mmand. set system s yslog- d ...

  • Cisco Systems 78-15328-01 - page 674

    2-630 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set sy stem s yslog-f ile set system syslog-file T o specify the f lash devi ce and f ile name for the syslo g dump when the system fa ils, use the set system syslog-file comm and. set system sy slog- fi ...

  • Cisco Systems 78-15328-01 - page 675

    2-631 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set tacacs attempts set tacacs attempts T o configure t he m aximum number of login a ttempt s allowed to the T A CA CS+ server , use t he set taca cs attemp ts com mand . set tac acs a ttemp ts coun ...

  • Cisco Systems 78-15328-01 - page 676

    2-632 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set taca cs directedre quest set tacacs directed request T o en able or disa ble t he T A CAC S+ di rected- r eques t opt ion, u se the set tacacs dir ectedrequest comman d. Wh en ena bled, yo u can dir ...

  • Cisco Systems 78-15328-01 - page 677

    2-633 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set tacacs key set tacacs key T o set the ke y for T A CA CS+ authentication and enc ryption, use the set taca cs ke y co mmand. set ta cacs k ey key Syntax Descript ion Defaults The def ault v alue o ...

  • Cisco Systems 78-15328-01 - page 678

    2-634 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set tacacs server set tacacs serv er T o de fin e a T ACA CS+ s erv er , use th e set t aca cs se rver co mman d. set taca cs server ip_addr [ primary ] Syntax D escr i pti on Defaults Thi s command has ...

  • Cisco Systems 78-15328-01 - page 679

    2-635 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s s et tacacs timeout set tacacs time out T o set t he response tim eout inte rval for the T A CA CS+ serv er daemon, use th e set tacacs tim eout command. The T A CA CS+ server must respond to a T ACA ...

  • Cisco Systems 78-15328-01 - page 680

    2-636 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set test diagf ail-act ion set test diagfail-action T o set t he action th at the supervisor en gine tak es when a diagnos tics test f ails, u se the set tes t diagfail-ac tion command. set tes t di agfa ...

  • Cisco Systems 78-15328-01 - page 681

    2-637 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set test d iaglevel set test diaglevel T o s et th e di agnos tic level, us e t he set te st diaglevel co mman d. set test dia glevel { complete | minimal | bypass } Syntax Descript ion Defaults The d ...

  • Cisco Systems 78-15328-01 - page 682

    2-638 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set ti me set time T o change the time of day on the system clo ck, use the set time comman d. set time [ d ay_ of_week ] [ mm/ dd /yy ] [ hh:mm:ss ] Syntax D escr i pti on Defaults Thi s command has no ...

  • Cisco Systems 78-15328-01 - page 683

    2-639 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s se t tim ez on e set timezone T o set the time zone for the system, use the set timezo ne com mand. set timezone [ zone_n ame ] [ hou rs [ minutes ]] Syntax Descript ion Defaults The default is the ti ...

  • Cisco Systems 78-15328-01 - page 684

    2-640 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set traffic m on itor set traffic monitor T o conf igure the thr eshold at which a hig h-traf fic log will be g enerated, u se the set traffic monitor comm and. set tra ffic monitor thre shold Syntax D e ...

  • Cisco Systems 78-15328-01 - page 685

    2-641 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set trunk set trunk T o conf ig ure trunk ports and to add VLANs to the allo wed VLAN list for exis ting trunks, use the set trunk comm and. set trunk mod/po rt { on | off | desirable | auto | nonegot ...

  • Cisco Systems 78-15328-01 - page 686

    2-642 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set trunk The fo llo wing usage guidel ines apply when using t he set trun k command : • If a tru nk- type keyword ( isl , dot1 q , negotiate ) is not specif ied when conf iguring an Ether Channel trun ...

  • Cisco Systems 78-15328-01 - page 687

    2-643 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set trunk Relat e d Commands clear tr unk set vtp show port do t1q-ethertype show trunk show vtp statistics ...

  • Cisco Systems 78-15328-01 - page 688

    Chapter 2 Catalyst 6 500 Series Swi tch and ROM M onitor Commands set udld 2-644 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 22 set udld T o enab le or dis able the UDLD i nform ation displ ay on s pecif ied por ts or gl oball y on al l port s, use t he set udld command. set udld enable | disable [ mod/port ] Syntax Des ...

  • Cisco Systems 78-15328-01 - page 689

    2-645 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set udld This exam ple sh ows how to disab l e the UD LD m es sag e displ ay f or po rt 1 o n m odu le 2: Console> (enable) set udld disable 2/1 UDLD disabled on port 2/1. Warning:UniDirectional Li ...

  • Cisco Systems 78-15328-01 - page 690

    2-646 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set udld aggres si ve-mod e set udld aggressive-mo de T o enable or disable the UDLD aggr essi ve mode on sp ecified port s , use the set udld aggr essive-mode comm and. set udld agg ressive-mode enable ...

  • Cisco Systems 78-15328-01 - page 691

    2-647 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set udld interval set udld interval T o set t he UDLD message inte rva l timer , use the set udld inter val com mand. set udld interval interval Syntax Descript ion Defaults The de fault is 15 seco nd ...

  • Cisco Systems 78-15328-01 - page 692

    2-648 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set vl an set vlan T o group p orts int o a VLAN, set t he priv ate VL AN type, map or un map VLAN s to or f rom an in sta nc e, specify a n 802. 1X port to a VLAN , or sec ure a r ange of VLAN s on a Fi ...

  • Cisco Systems 78-15328-01 - page 693

    2-649 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set v lan Defaults The de fault values ar e as follows: • Switche d Ethern et ports and Ether net repe ater por ts are in VLA N 1. • said is 100001 for VLAN 1, 100002 for VLAN 2, 100003 fo r VLAN ...

  • Cisco Systems 78-15328-01 - page 694

    2-650 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set vl an If you spe cify a r an ge of V LA Ns, y ou cann ot u se the VLAN name . If you ente r the mistp-instance none co m m a nd , the specified VLANs are unmapped from any instance they are mapped to ...

  • Cisco Systems 78-15328-01 - page 695

    2-651 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set v lan Exam ples Th is example shows how to set VLAN 850 to incl ude ports 3 throu gh 7 on modul e 3: Console> (enable) set vlan 850 3/3-7 VLAN 850 modified. VLAN Mod/Ports ---- ---------------- ...

  • Cisco Systems 78-15328-01 - page 696

    2-652 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set vl an mappi n g set vlan mapping T o map r eserved VLANs to n onreserved VL ANs or map 8 02.1Q V LANs to ISL VLANs, use t he set vlan mapping comm and. set vlan mapping reserv ed vlan non-reser ved v ...

  • Cisco Systems 78-15328-01 - page 697

    2-653 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set vlan mapping If the table is full, the command is aborted wit h an error message indica ting the table is full. The dot 1q VLANs are r ejected if an y extende d-range VLANs ar e prese nt. Exam ple ...

  • Cisco Systems 78-15328-01 - page 698

    2-654 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set vmps dow nloa dm et hod set vmps down loadmeth od T o spec ify whether to use TFTP or rcp t o do wnl oad the VM PS dat abase, use the set vmps downloadmethod comman d. set vmps downloadmethod { rcp | ...

  • Cisco Systems 78-15328-01 - page 699

    2-655 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set vmps downl oadserver set vmps downloadserver T o spec if y the IP ad dress of t h e T FTP or rc p server from wh ich the V MPS databa se is download ed , use the set vmps downloadserver com mand. ...

  • Cisco Systems 78-15328-01 - page 700

    2-656 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set vm ps ser ver set vmps server T o conf ig ure the VMPS, use the set vmps server command . set vmps server ip_ addr [ primary ] set vmps se rver retry count set vmps ser ver r econfirmi nterv al inter ...

  • Cisco Systems 78-15328-01 - page 701

    2-657 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set vmps server This example shows how to define a secondary VMPS: Console> (enable) set vmps server 192.168.69.171 192.168.69.171 added to VMPS table as backup domain server. Console> (enable) ...

  • Cisco Systems 78-15328-01 - page 702

    2-658 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set vmps state set vmps state T o enable or disable VMPS, use the set vmps state co mman d. set vmps st ate { enable | disable } Syntax D escr i pti on Defaults By defau lt, VMPS is di sabled. Comma nd T ...

  • Cisco Systems 78-15328-01 - page 703

    2-659 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set vtp set vtp T o set t he options for VTP , use the se t vtp command. set vtp [ doma in doma in_name ] [ mode { c lient | server | transparent | off }] [ passwd passwd ] [ pruning { enable | disabl ...

  • Cisco Systems 78-15328-01 - page 704

    2-660 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set vt p If the re cei ving switch is in se rve r mode, the co nf igurati o n is not changed . If the recei ving switch is in client mo de, the clien t switch cha nges its conf iguration to d uplicate th ...

  • Cisco Systems 78-15328-01 - page 705

    2-661 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set vtp pruneeligible set vtp pruneeligib le T o specify which VTP dom ain VLANs are pruning elig ible, use the set vtp pruneeligible com mand. set vtp pruneeligible vlans Syntax Descript ion Defaults ...

  • Cisco Systems 78-15328-01 - page 706

    Chapter 2 Catalyst 6 500 Series Swi tch and ROM M onitor Commands sh ow accou nting 2-662 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 22 show accou nting T o di splay ac counti ng setup and con figuratio n infor mati on on t he sw itch , us e the show ac counti ng comm and. show accoun ting Syntax Descript ion This c om ...

  • Cisco Systems 78-15328-01 - page 707

    2-663 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show acc oun ting Overall Accounting Traffic: Starts Stops Active Exec 1 0 2 Connect 0 0 1 Command 0 0 0 System 0 0 0 Console> (enable) This e xample shows th e conf iguration details of a switch w ...

  • Cisco Systems 78-15328-01 - page 708

    2-664 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show ac coun ting Relat e d Commands set accounting commands set accounting connect set ac countin g exec set accounting suppress set accounting syste m set accounting update ...

  • Cisco Systems 78-15328-01 - page 709

    2-665 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show acllog show acllog T o display the status of A CL log ra te limitin g, use the show acllog command . show acllog Syntax Descript ion This c omm and ha s no a rgume nts o r keywords. Defaults Thi ...

  • Cisco Systems 78-15328-01 - page 710

    2-666 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show ac lmer ge show ac lmerg e T o display informat io n about the A CL merge algor ithm, use the sho w aclm erge command. show aclmerge bdd show aclmerge algo Syntax D escr i pti on Defaults Thi s comm ...

  • Cisco Systems 78-15328-01 - page 711

    2-667 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show ali as show alias T o di splay a li sting of defined c om mand alia ses, use the show al ias comm and. show alias [ name ] Syntax Descript ion Defaults Thi s command has no de fa ult set tings. C ...

  • Cisco Systems 78-15328-01 - page 712

    2-668 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show arp show arp T o dis pla y the ARP t able , use the show arp comman d. show arp [ ip_addr | hostnam e ] [ noalias ] Syntax D escr i pti on Defaults Thi s command has no de fa ult set tings. Comma nd ...

  • Cisco Systems 78-15328-01 - page 713

    2-669 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show auth enticat ion show authen tication T o display authentica tion information, use the show au thentic ation co mman d. show authenti catio n Syntax Descript ion This c omm and ha s no a rgume nt ...

  • Cisco Systems 78-15328-01 - page 714

    2-670 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show au tho rization show authorizatio n T o display auth orization setup a nd config uration inform ation on the swit ch, use the sho w author ization comm and. show authorization Syntax D escr i pti on ...

  • Cisco Systems 78-15328-01 - page 715

    2-671 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show bann er show banne r T o vi ew the me ssa ge of the day ( MOTD), the Cat alyst 650 0 s er ies Switc h Fabric Mo dul e L CD b ann er, and the st atus of the T el net bann er stored in NVRAM , use ...

  • Cisco Systems 78-15328-01 - page 716

    2-672 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show bo ot show boot T o displa y the conte nts of the BO OT enviro nment vari ables and the conf iguratio n regi ster settin g, use the show boot command. show boot [ mod ] Syntax D escr i pti on Defaul ...

  • Cisco Systems 78-15328-01 - page 717

    2-673 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show boo t device show boot de vice T o display the NAM boot string st ored in NVRAM , use the show boot device comm and. show boot de vice mod Syntax Descript ion Defaults Thi s command has no de fa ...

  • Cisco Systems 78-15328-01 - page 718

    2-674 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show ca m show cam T o display CAM table entr ies, use the show c am command. show cam { dynamic | st atic | pe rm a nen t | syste m } [{ mod/port } | vla n ] show cam mac_addr [ vlan ] Syntax D escr i p ...

  • Cisco Systems 78-15328-01 - page 719

    2-675 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s sho w ca m 1 00-60-09-78-96-fb * 4/1 [ALL] 1 00-80-24-1d-d9-ed * 1/2 [ALL] 1 00-80-24-1d-da-01 * 1/2 [ALL] 1 08-00-20-7a-63-01 * 4/1 [ALL] Total Matching CAM Entries Displayed = 7 Console> This exa ...

  • Cisco Systems 78-15328-01 - page 720

    2-676 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show ca m agi ngtime show cam ag ingti me T o display CAM aging time info rmation for all conf igured VLANs, use the show cam agingtime comm and. show cam agingtime [ vlan ] Syntax D escr i pti on Defaul ...

  • Cisco Systems 78-15328-01 - page 721

    2-677 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show cam count show cam co unt T o display the number of CAM entries only , u se the show cam count command . show cam count { dynamic | static | permanent | system } [ vlan ] Syntax Descript ion Defa ...

  • Cisco Systems 78-15328-01 - page 722

    2-678 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show ca m m sf c show cam msfc T o display the router ’ s MA C- VLAN entries, use the sho w cam msfc comman d. show cam msfc { mod } [ vlan ] Syntax D escr i pti on Defaults Thi s command has no de fa ...

  • Cisco Systems 78-15328-01 - page 723

    2-679 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show cam notification show cam notification T o display the status of CAM table notificati ons, notification intervals, and MAC addresses added a nd deleted, use the show ca m noti fication co mman d. ...

  • Cisco Systems 78-15328-01 - page 724

    2-680 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show ca m not ification This exam ple shows how to displ ay C AM not ification i n forma tion for po rts 1-6 on modu le 2: Console> show cam notification 2/1-6 Mod/Port Added Removed --------- ------- ...

  • Cisco Systems 78-15328-01 - page 725

    2-681 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show cam notification Relat e d Commands clear ca m clear ca m notif ication set cam set cam n otificati on set snmp tr ap show cam ...

  • Cisco Systems 78-15328-01 - page 726

    2-682 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show cd p show cdp T o di splay Cisco D iscovery Prot ocol (C DP) infor ma tion, use th e show cdp comm and. show cdp show cdp ne ighbors [ mod [/ port ]] [ vl an | duplex | capabilities | detail ] show ...

  • Cisco Systems 78-15328-01 - page 727

    2-683 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show cd p This example shows how to display detai led CDP neighbor informa tion. Th e display varies dependi ng on yo ur ne twork c onfigurati on at the ti me you r un the c omman d. Console> show ...

  • Cisco Systems 78-15328-01 - page 728

    2-684 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show cd p Port Device-ID Port-ID NativeVLAN -------- ------------------------------- ------------------------- ---------- 3/5 002267619 3/6 * 1 3/6 002267619 3/5 1 4/1 002267619 4/2 1 4/2 002267619 4/1 # ...

  • Cisco Systems 78-15328-01 - page 729

    2-685 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show chan nel show chann el T o d ispl ay E t herCh ann el i nfo rmat ion fo r a ch an nel , u se t he show channel co mm and. show channe l [ chann el_id ] [ inf o | stat istics | mac ] show channe l ...

  • Cisco Systems 78-15328-01 - page 730

    2-686 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show ch anne l This exam ple shows how to di splay c ha nnel in forma ti on for a ll c hanne ls: Console> show channel Channel Id Ports ----------- ----------------------------------------------- 768 ...

  • Cisco Systems 78-15328-01 - page 731

    2-687 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show chan nel Chan Port if- Oper-group Neighbor Chan Oper-Distribution id Index Oper-group cost Method ---- ----- ----- ---------- ---------- ----- ----------------- 769 1/1 - 1 0 ip both 769 1/2 - 1 ...

  • Cisco Systems 78-15328-01 - page 732

    2-688 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show ch anne l 768 469263 48083 Channel Dely-Exced MTU-Exced In-Discard Lrn-Discrd In-Lost Out-Lost -------- ---------- ---------- ---------- ---------- ---------- ---------- 768 0 0 0 0 0 0 Console> ...

  • Cisco Systems 78-15328-01 - page 733

    2-689 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show chan nel ---- ----- -------- -------- -------- 769 1/1 on auto-on auto-on 769 1/2 on auto-on auto-on Console> Console> show channel 769 info gmrp Chan Port GMRP GMRP GMRP id status registra ...

  • Cisco Systems 78-15328-01 - page 734

    2-690 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show ch anne l group show chann el group T o disp lay Ether Chan nel gr oup sta tus infor mati on, us e the show channel group comman d. sho w chann el gr oup [ admin_gr oup ] [ inf o | statistics ] sho ...

  • Cisco Systems 78-15328-01 - page 735

    2-691 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show chan nel gro up Admin Port Device-ID Port-ID Platform group ----- ----- ------------------------------ ------------------------- ---------- 154 1/1 154 1/2 066510644(cat26-lnf(NET25)) 2/1 WS-C550 ...

  • Cisco Systems 78-15328-01 - page 736

    2-692 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show ch anne l group Admin Port Qos-Tx Qos-Rx Qos-Trust Qos-DefCos Qos-Port-based group ----- ----- ------ ------ ------------ ---------- -------------- 154 1/1 2q2t 1q4t untrusted 0 false 154 1/2 2q2t 1 ...

  • Cisco Systems 78-15328-01 - page 737

    2-693 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show chan nel gro up Console> show channel group 154 info gvrp Admin Port GVRP GVRP GVRP group status registeration applicant ----- ----- -------- ------------- --------- 154 1/1 disabled normal no ...

  • Cisco Systems 78-15328-01 - page 738

    2-694 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show ch annel ha sh show chann el has h T o display the channe l port the traff ic goes to based on the current ch annel distrib ution mode, use the show channel hash command . show channel hash channe l ...

  • Cisco Systems 78-15328-01 - page 739

    2-695 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show channel mac show chann el mac T o display MA C information in the ch annel, use the sho w channel mac comm and. show channe l mac Syntax Descript ion This c omm and ha s no a rgume nts o r keywor ...

  • Cisco Systems 78-15328-01 - page 740

    2-696 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show ch anne lprot oco l show chann elprotocol T o d isp l ay the channeling prot ocol used by each m odule in the sys tem, u s e t h e show channelpr otocol comm and. show channelpr otocol Syntax D escr ...

  • Cisco Systems 78-15328-01 - page 741

    2-697 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show channel traffic show chann el traffic T o display c hannel p ort utilization based on MAC counters, use the show ch annel traffic comma nd. show channel t raffi c [ chann el_id ] Syntax Descript ...

  • Cisco Systems 78-15328-01 - page 742

    2-698 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show co nfi g show config T o d isplay the nond efaul t sys tem or m odule con figurat ion, u se the show config command. show conf ig [ all ] show conf ig [ syst em | mod ] [ all ] show c onfig a cl loc ...

  • Cisco Systems 78-15328-01 - page 743

    2-699 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show config ! #frame distribution method set port channel all distribution mac unknown ! #snmp set snmp trap 0.0.0.0 set snmp trap 0.0.0.0 ! #kerberos set kerberos server 0.0.0.0 set kerberos server 0 ...

  • Cisco Systems 78-15328-01 - page 744

    2-700 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show co nfi g #rcp set rcp username 1 ! #dns set ip dns server 171.68.10.70 primary set ip dns server 171.68.10.140 set ip dns enable set ip dns domain cisco.com ! #spantree set spantree fwddelay 4 801 s ...

  • Cisco Systems 78-15328-01 - page 745

    2-701 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show config #module 4 empty ! #module 5 : 48-port 10/100BaseTX (RJ-45) ! #module 6 empty ! set vlan 100 6/1 set spantree portcost 6/1 200 ! #module 7 : 24-port 10/100BaseTX Ethernet set vlan 5 7/5 set ...

  • Cisco Systems 78-15328-01 - page 746

    2-702 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show co nfi g #system set system baud 9600 set system modem disable set system name set system location set system contact ! . . . Console> This example shows ho w t o display nond efault syste m conf ...

  • Cisco Systems 78-15328-01 - page 747

    2-703 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show config This e xample sho ws how to display the A CL config uration f ile location: Console> (enable) show config acl location ACL configuration is being saved in NVRAM. Console> (enable) Re ...

  • Cisco Systems 78-15328-01 - page 748

    2-704 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show co nfi g m od e show config mode T o disp lay the syst em conf igur ation mode cur rent ly runn ing on the swi tch, use the show conf ig mode comm and. show conf ig mode Syntax D escr i pti on This ...

  • Cisco Systems 78-15328-01 - page 749

    2-705 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show co n fig q os a cl show config qos acl T o display the co mmitted ac cess lis ts in a c ommand l ine form at, use th e show conf ig qos acl comm and. show conf ig qos acl { acl _nam e | all } Syn ...

  • Cisco Systems 78-15328-01 - page 750

    2-706 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show co ps show cops T o display COPS information, use the show cops comm and. show cops inf o [ diff-se rv | rsvp ] [ noalias ] show cops r oles Syntax D escr i pti on Defaults Thi s command has no de f ...

  • Cisco Systems 78-15328-01 - page 751

    2-707 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show co p s COPS connection state : connected Last active server : 171.21.34.56 Primary configured server : 171.21.34.56 [3288] Secondary configured server : 171.21.34.57 [3288] Console> This examp ...

  • Cisco Systems 78-15328-01 - page 752

    2-708 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show co ps COPS RSVP client state ---------------------- COPS connection state : not-connected TCP connection state : not-connected Last active server : - Primary configured server : - Secondary configur ...

  • Cisco Systems 78-15328-01 - page 753

    2-709 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show count ers show counte rs T o d isplay h ardwa re c oun ter s fo r a por t, all p orts on a m odul e, or a su pervi so r en gin e, u se t he show counters com mand. show counters { mod | mo d / po ...

  • Cisco Systems 78-15328-01 - page 754

    2-710 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show co unt ers 15 rxTxHCpkts1024to1518Octets = 0 16 rxDropEvents = 0 17 txHCTrunkFrames = 0 18 rxHCTrunkFrames = 0 19 rxHCDropEvents = 0 32 bit counters 0 rxCRCAlignErrors = 0 1 rxUndersizedPkts = 0 2 r ...

  • Cisco Systems 78-15328-01 - page 755

    2-711 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show count ers Ta b l e 2 - 2 8 describes the possible fie lds in the show coun ter s comm and out put. T able 2-28 sho w count ers Command Output Fields Field Des criptio n 64-bit coun ters rxHCT ota ...

  • Cisco Systems 78-15328-01 - page 756

    2-712 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show co unt ers 32-bit coun ters rxCRCA lignEr rors Numbe r of packets received that had a length (exclud ing fram ing bits, but includi ng FCS octet s) betwe e n 6 4 and 1 518 oct ets, inc lusive, and h ...

  • Cisco Systems 78-15328-01 - page 757

    2-713 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show count ers dot3StatsSingle ColFr am es A co unt of suc cessf ully t ra nsmitte d frame s on a p ar tic ular i nte rf ac e f or wh ich tran smission is inhibited b y exac tly one col lision. A fram ...

  • Cisco Systems 78-15328-01 - page 758

    2-714 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show co unt ers Relat e d Commands clear co unters rxPause Numbe r of c ontr ol f ra mes r ece ived at the gi gabi t l evel. This co unt er i s valid only o n a Gigabi t E ther net po rt. rxT otalDrop s ...

  • Cisco Systems 78-15328-01 - page 759

    2-715 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show crypto key show crypt o key T o display RSA key pa ir information, use the sho w crypto k ey comm and. show crypto ke y Syntax Descript ion This c omm and ha s no a rgume nts o r keywords. Defaul ...

  • Cisco Systems 78-15328-01 - page 760

    2-716 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show de fau lt show defaul t T o che c k the stat us of the d efault po rt s tat us sett ing, u se the show default command. show default Syntax D escr i pti on This comm and has n o keywords or a rgumen ...

  • Cisco Systems 78-15328-01 - page 761

    2-717 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show dot1 q-all-tagged show dot1q-all-tagg ed T o display the status of the dot1q taggi ng featu re on the switch, use the show dot1q-all-tagged comm and. show dot1q-all-tagged Syntax Descript ion Thi ...

  • Cisco Systems 78-15328-01 - page 762

    Chapter 2 Catalyst 6 500 Series Swi tch and ROM M onitor Commands sh ow dot1x 2-718 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 2 show dot1x T o display the system dot1x capabi lities, protoco l version , and timer val u es, use the show dot1x comm an d. show dot1x Syntax Descript ion This c omm and ha s no keywords or ...

  • Cisco Systems 78-15328-01 - page 763

    2-719 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show dvla n statistics show dvlan statistics T o display dynamic VLAN statistic s, use the show dvlan statistics co mmand. show dvlan statistics Syntax Descript ion This c omm and ha s no keywords or ...

  • Cisco Systems 78-15328-01 - page 764

    2-720 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show en vironm ent show environme nt T o display en vironmenta l, temperat ure, and inline po wer status infor mation, use the show en vir onment comm and. show environment [ all | temperatu re | { power ...

  • Cisco Systems 78-15328-01 - page 765

    2-721 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show en vironment This exam ple shows how to di spla y environmenta l sta tus infor ma tion an d d etai ls a bou t th e power av ailable to the system: Console> show environment all Environmental S ...

  • Cisco Systems 78-15328-01 - page 766

    2-722 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show en vironm ent This exam ple shows how to di splay t he in line power for al l m odule s: Console> show environment power PS1 Capacity:919.38 Watts (21.89 Amps @42V) PS2 Capacity:none PS Configura ...

  • Cisco Systems 78-15328-01 - page 767

    2-723 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show en vironment Ta b l e 2 - 2 9 descri bes the f ields in t he show environment output. T able 2-29 sho w env ironme nt Command Output Fields Field Description Envi ronment al Statu s 1 PS1: and PS ...

  • Cisco Systems 78-15328-01 - page 768

    2-724 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show en vironm ent Relat e d Commands set inlinepowe r defaultallocati on show environment show port inlinepo wer T ota l inline power drawn T o tal in line power drawn from the system. Inlin ePowe red? ...

  • Cisco Systems 78-15328-01 - page 769

    2-725 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show errdi sable-t imeout show errdisab le-timeo ut T o display the configurat ion and stat us of the errdi sable tim eout, use th e show errd isable-timeout comm and. show e rrdisable-time out Syntax ...

  • Cisco Systems 78-15328-01 - page 770

    2-726 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show err orde tection show errord etection T o display error detectio n settings, use the show errord etec ti on command. sho w err ordetection Syntax D escr i pti on This comm and ha s no a rgume nts o ...

  • Cisco Systems 78-15328-01 - page 771

    2-727 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show f abric channel show fabri c channel T o display Switch Fab ric Module inform ation, use the show fabric channel command. show fa bric channel counter s [ mod ] show fa bric channel ut ilization ...

  • Cisco Systems 78-15328-01 - page 772

    2-728 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show fabri c channe l Exam ples Th is exampl e sh ows how to displ ay fa bric cha nnel cou nter inf or mat ion f or a sp eci fic modu le: Console> show fabric channel counters 2 Channel 0 counters: 0 ...

  • Cisco Systems 78-15328-01 - page 773

    2-729 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show f abric channel Relat e d Commands switch fabric Fab Chan F abric cha nnel number; s ee the “ U sage Guid elines” sectio n for addi tion al infor matio n. Switc h Mod e Cha nnel swit ch m ode ...

  • Cisco Systems 78-15328-01 - page 774

    2-730 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show file show file T o display the conte nts of a file that hav e been saved to Flash memory , use the show f ile command. show f ile [ device : ] fil en ame [ dump ] Syntax D escr i pti on Defaults Thi ...

  • Cisco Systems 78-15328-01 - page 775

    2-731 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show fla sh show flash T o list bootfl ash or Fl ash PC c ard in formatio n, inc luding file code nam es, version nu mber s, volume ID, status , and si z es , us e t he show flash command. show flash ...

  • Cisco Systems 78-15328-01 - page 776

    2-732 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show flas h Console> show flash chips ******** Intel Series 2+ Status/Register Dump ******** ATTRIBUTE MEMORY REGISTERS: Config Option Reg (4000): 2 Config Status Reg (4002): 0 Card Status Reg (4100): ...

  • Cisco Systems 78-15328-01 - page 777

    2-733 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show fla sh USAGE INFO: Bytes Used = 201D9B Bytes Available = 5FE265 Bad Sectors = 0 Spared Sectors = 0 OK Files = 1 Bytes = 100FC0 Deleted Files = 1 Bytes = 100DDB Files w/Errors = 0 Bytes = 0 ****** ...

  • Cisco Systems 78-15328-01 - page 778

    2-734 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show ga rp ti m er show garp timer T o display all the valu es of the General At tr ibute Reg istration Pro tocol (GARP) timers, us e the sho w garp timer comm and. show garp timer Syntax D escr i pti on ...

  • Cisco Systems 78-15328-01 - page 779

    2-735 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show gm rp conf igurat ion show gmrp conf iguration T o display complete GMRP-rel ated configu ration informat ion, use th e show gmrp conf iguration comm an d. show gmrp confi guration Syntax Descrip ...

  • Cisco Systems 78-15328-01 - page 780

    2-736 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show gmr p stat is ti cs show gmrp statistics T o display all the GMR P-relate d statistics for a specified VLA N, use the show gmrp statistics comm an d. show gmrp statistics [ vlan ] Syntax D escr i pt ...

  • Cisco Systems 78-15328-01 - page 781

    2-737 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show gmrp tim er show gm rp timer T o display all the values of the GMRP timers, us e the show gmrp timer co mman d. show gmrp timer Syntax Descript ion This c omm and ha s no a rgume nts o r keywords ...

  • Cisco Systems 78-15328-01 - page 782

    2-738 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show gvrp co nfigu rat ion show gvrp c onfigura tion T o disp lay GVRP c onfiguration i nforma tion, in cludin g timer values, whether or not G VRP and d ynamic VLAN c re atio n i s enab le d, a nd whi c ...

  • Cisco Systems 78-15328-01 - page 783

    2-739 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show gvr p co nfi gur a tio n Disabled Fixed Normal 4/2 Disabled Fixed Active 4/7 Disbled Forb idden Normal 4/3 Disbled Forb idden Active 4/6 GVRP Participants running on no ports. Console> Relat e ...

  • Cisco Systems 78-15328-01 - page 784

    2-740 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show gvrp s tatistic s show gvrp statistics T o vie w GVRP statistics for a port, use the show gvrp sta tistic s command. show gvrp statistics [ mod/port ] Syntax D escr i pti on Defaults The def ault is ...

  • Cisco Systems 78-15328-01 - page 785

    2-741 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show gvrp stat istics Relat e d Commands clear g vrp st ati st i cs set gvrp set gvrp dy namic- vlan- creation set gvrp registration set gvrp timer show gvrp c onfiguration MAC-Based General Qu erie s ...

  • Cisco Systems 78-15328-01 - page 786

    2-742 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show ifin dex show ifindex T o display the informatio n of the specif ic ifIndex, use the show if index comman d. show i findex number Syntax D escr i pti on Defaults Thi s command has no de fa ult set t ...

  • Cisco Systems 78-15328-01 - page 787

    2-743 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show igmp flooding show igmp fl ooding T o d isplay w het her t he IGM P f lood in g fea tur e is ena ble d o r disab led, u se the show igmp floo ding comm and. show i gmp flooding Syntax Descript io ...

  • Cisco Systems 78-15328-01 - page 788

    2-744 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show igm p le ave-q uery -type show igmp le ave-query-type T o d ispl ay t he ty pe of q ue ry to b e sent whe n a po rt r ece iv es a l eave mess age, us e th e show igmp lea ve-query-type comman d. Syn ...

  • Cisco Systems 78-15328-01 - page 789

    2-745 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show ig mp m ode show igmp mode T o display the IGMP mode on the switch, use the show i gmp mode comman d. show i gmp mode Syntax Descript ion This c omm and ha s no keywords or argume nts. Defaults T ...

  • Cisco Systems 78-15328-01 - page 790

    2-746 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show igm p qu erier info rmatio n show igmp querier information T o disp lay queri er info rmatio n specific to a c onfigured V LAN, use the show igmp queri er inf ormation comm and. show ig m p q u eri ...

  • Cisco Systems 78-15328-01 - page 791

    2-747 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show igmp ratelimit-info show igmp ratelimit-info T o display the I GMP rat e limit for gene ral-q uery p ackets, IG MP snoo ping pro tocol packets, an d Prot ocol Independen t Multic asting v ersion ...

  • Cisco Systems 78-15328-01 - page 792

    2-748 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show igm p s tatistics show igmp statistics T o vie w IGMP statistics f or a partic ular VLAN, use the show igmp statistics co mman d. show igmp statistics [ vlan_id ] Syntax D escr i pti on Defaults The ...

  • Cisco Systems 78-15328-01 - page 793

    2-749 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s sh ow ig mp st a t is ti c s Relat e d Commands clear ig mp statist ics clear multi cast router set igmp set multicast router show multicast group show multicast r outer Group Speci fic Qu eries recvd ...

  • Cisco Systems 78-15328-01 - page 794

    2-750 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show im agem ib show imagemib T o display i mage infor mation prov ided in th e CISCO-IM A GE -MIB for a partic ular imag e, us e the show imagemib command. show imagemib filen ame Syntax D escr i pti on ...

  • Cisco Systems 78-15328-01 - page 795

    2-751 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show interface show interface T o display informat ion on network interf aces, use the show inte rface command . show interface Syntax Descript ion This c omm and ha s no a rgume nts o r keywords. Def ...

  • Cisco Systems 78-15328-01 - page 796

    2-752 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show inte rfa ce Relat e d Commands set interface dest IP address of the host to which the console por t will be conn ected. sc0 Information on the sc 0 in-band interface . vlan Number of the VLAN to whi ...

  • Cisco Systems 78-15328-01 - page 797

    2-753 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show ip alias show ip alias T o s how a listi ng of de fined IP al iases, us e the show ip alias co mman d. show ip alias [ name ] Syntax Descript ion Defaults Thi s command has no de fa ult set tings ...

  • Cisco Systems 78-15328-01 - page 798

    Chapter 2 Catalyst 6 500 Series Swi tch and ROM M onitor Commands sh ow ip dns 2-754 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 2 show ip dns T o s how the DNS name server s and the de fault D NS dom ain nam e, us e t he show ip dns command. show i p dns Syntax Descript ion This c omm and ha s no a rgume nts o r keywor ...

  • Cisco Systems 78-15328-01 - page 799

    2-755 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show ip d ns Relat e d Commands clear ip dns domain clear ip dns serv er set ip dns set ip dns domain set ip dns server ...

  • Cisco Systems 78-15328-01 - page 800

    2-756 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show ip htt p show ip http T o vie w the HTTP conf iguration and the switch web inte rface inf ormation, use the show ip http comm and. show ip http Syntax D escr i pti on This comm and ha s no a rgume n ...

  • Cisco Systems 78-15328-01 - page 801

    2-757 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show ip http This e xample sho ws the HTTP conf iguration and web interface in formation if the web in terface is not supported: Console> show ip http HTTP Configuration Information: -------------- ...

  • Cisco Systems 78-15328-01 - page 802

    2-758 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show ip perm i t show ip permit T o display the IP permit list information , use the show ip pe rmit command. show ip permit [ noalias ] Syntax D escr i pti on Defaults This co mmand has no de fa ult v a ...

  • Cisco Systems 78-15328-01 - page 803

    2-759 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show ip permit Relat e d Commands clear ip permit set ip permit set snmp tr ap Last Accessed T ime Date and time of the last attempt to log in to the switch from the address. T ype Login-attempt type ...

  • Cisco Systems 78-15328-01 - page 804

    Chapter 2 Catalyst 6 500 Series Swi tch and ROM M onitor Commands sh ow ip rout e 2-760 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 2s2 show ip route T o display IP routing table entries, use the show ip r oute command. show ip r oute [ noalias ] Syntax Descript ion Defaults Thi s command has no de fa ult set tings. Com ...

  • Cisco Systems 78-15328-01 - page 805

    2-761 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show ip r out e Relat e d Commands clear ip r oute set ip route ...

  • Cisco Systems 78-15328-01 - page 806

    2-762 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show ke rber os show ke rbero s T o display the K erberos conf iguration information , use the show kerberos com mand. sho w kerber os [ cr eds ] Syntax D escr i pti on Defaults Thi s command has no de f ...

  • Cisco Systems 78-15328-01 - page 807

    2-763 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show kerberos Relat e d Commands clear ke rberos clients mandat ory clear ke rberos cr edentials f orwar d clea r k er beros rea lm clear ke rbero s serv er clear ke y conf ig-key set kerber os client ...

  • Cisco Systems 78-15328-01 - page 808

    2-764 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show l2pr otocol-t unnel sta ti st ic s show l2pro tocol -tunnel sta tistics T o di splay Lay er 2 pr otoc ol tunne li ng stati sti cs for a por t or ra nge or po rts, use t h e show l2protocol-tunnel st ...

  • Cisco Systems 78-15328-01 - page 809

    2-765 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show l2 protoco l-tunnel stati stics Port VTP Frames Encap VTP Frames De-encap ------------------------ -------------------- -------------------- 7/1 0 0 7/2 0 0 Console> This exam ple shows how to ...

  • Cisco Systems 78-15328-01 - page 810

    2-766 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show lacp- channel show lacp-cha nnel T o di splay inf or matio n abo ut the Li nk A ggr egation Contr ol Pr otoc ol ( LACP) channe l, use t he show lacp-channel comman d. show l acp-channel show lacp-ch ...

  • Cisco Systems 78-15328-01 - page 811

    2-767 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show l acp-chan nel Command Mode s Normal. Usage Guid el i nes If you do not speci fy the admi n-key v alue, infor mation about all LA CP channels is di splayed. If you do not speci fy the channel_id ...

  • Cisco Systems 78-15328-01 - page 812

    2-768 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show lacp- channel This example shows how to display L A CP Tx and Rx sta tistics for por ts that are assign ed to administ rative k ey 152: Console> show lacp-channel group 152 statistics Port Admin ...

  • Cisco Systems 78-15328-01 - page 813

    2-769 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show l acp-chan nel This example shows how to display the outgo ing port for th e specified source and destination IP addresses: Console> (enable) show lacp-channel hash 808 172.20.32.10 172.20.32. ...

  • Cisco Systems 78-15328-01 - page 814

    2-770 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show lcper roracti on show lcperroract ion T o di splay ho w yo ur syst em handl es LCP e rrors wh en a modu le repo rts an ASI C probl em to the Netwo rk Managem ent Proce ssor (NM P), us e t he show lc ...

  • Cisco Systems 78-15328-01 - page 815

    2-771 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show lda show lda T o displa y the ASLB conf iguration informati on, use the sho w lda comman d. show lda [ committed | uncommitted ] show lda mls entry show lda mls entry [ de st ina ti on ip_addr_s ...

  • Cisco Systems 78-15328-01 - page 816

    2-772 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show lda Command Mode s Normal. Usage Guid el i nes This c omm and is suppor ted on ly o n sw itc he s configu red w ith th e Supe r visor En gine 1 wi th L aye r 3 Switching Engine WS-F6K-PFC (Pol icy F ...

  • Cisco Systems 78-15328-01 - page 817

    2-773 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show lda LD Router Side: --------------- Router and LD are on VLAN 110 LD is connected to switch port 4/26 on VLAN 110 LD Server Side: --------------- Server(s) and LD are on VLAN 105 LD is connected ...

  • Cisco Systems 78-15328-01 - page 818

    2-774 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show lda This example shows ho w to di splay the num ber of active ASLB MLS entri es: Console> (enable) show lda mls statistics count LDA active shortcuts:20 Console> (enable) This exa mple shows h ...

  • Cisco Systems 78-15328-01 - page 819

    2-775 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show localuser show localu ser T o display the local user ac counts for a switch, use the show loca luser comma n d. show localuser [ name ] Syntax Descript ion Defaults Thi s command has no de fa ult ...

  • Cisco Systems 78-15328-01 - page 820

    2-776 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show log show log T o display the error log for the system or a specif ic module, use the show log comman d. show log [ mod ] show log dump [ - count ] Syntax D escr i pti on Defaults Thi s command has n ...

  • Cisco Systems 78-15328-01 - page 821

    2-777 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show log NVRAM log: 01. 1/25/2000,17:39:10: convertCiscoMIB:PreSac(0) checksum failed: 0xFFFF(0xE507 ) Module 3 Log: Reset Count: 14 Reset History: Wed Mar 22 2000, 10:35:54 Fri Mar 17 2000, 15:36:57 ...

  • Cisco Systems 78-15328-01 - page 822

    2-778 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show log com mand show log comma nd T o dis play th e command log entries, u s e t h e show log co mmand command. show log command [ mod ] Syntax D escr i pti on Defaults Thi s command has no de fa ult s ...

  • Cisco Systems 78-15328-01 - page 823

    2-779 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show l ogging show loggin g T o display the system me ssage log info rma tion, u se the show logging comman d. show logging [ noalias ] Syntax Descript ion Defaults Thi s command has no de fa ult set ...

  • Cisco Systems 78-15328-01 - page 824

    2-780 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show loggi ng qos 7 7 radius 7 7 rsvp 7 7 security 7 7 snmp 7 7 spantree 7 7 sys 7 7 tac 7 7 tcp 7 7 telnet 7 7 tftp 7 7 udld 7 7 vmps 7 7 vtp 7 7 0(emergencies) 1(alerts) 2(critical) 3(errors) 4(warning ...

  • Cisco Systems 78-15328-01 - page 825

    2-781 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show log ging buff er show loggin g buffer T o display sy stem m essages fro m the internal buf fer , use the show logging buffer comman d. show logging buffer [ – ] [ number_of _mes sages ] Syntax ...

  • Cisco Systems 78-15328-01 - page 826

    2-782 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show mac show mac T o display MA C counters, use the show mac comman d. show mac [ utilization ] [ mod [/ port ]] Syntax D escr i pti on Defaults Thi s command has no de fa ult set tings. Comma nd T ypes ...

  • Cisco Systems 78-15328-01 - page 827

    2-783 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show ma c -------- ---------- ---------- ---------- ----------- 3/1 0 0 0 0 Port Last-Time-Cleared ----- -------------------------- 3/1 Wed Jan 14 2004, 07:59:35 Console> This c omma nd shows how t ...

  • Cisco Systems 78-15328-01 - page 828

    2-784 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show mac Rcv -Octet Numbe r of octe t frames re ceived on the port. Xmit-Octet Nu mber o f octet f rames tran smitted on the port. Rcv-Un icast Number of unic ast frames recei ved on the po rt. Rcv-Br oa ...

  • Cisco Systems 78-15328-01 - page 829

    2-785 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show microco de show microcode T o display the version of the microcod e and the modu le version info rmation, use the sh ow microco de comm and. sho w micr ocode Syntax Descript ion This c omm and ha ...

  • Cisco Systems 78-15328-01 - page 830

    2-786 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show ml s show mls T o display MLS Laye r 3 pack et infor mation in t he MLS-base d Catalyst 6500 series swi tches, us e the show mls com mand. show mls [ ip | ip x ] [ mod ] Syntax D escr i pti on Defau ...

  • Cisco Systems 78-15328-01 - page 831

    2-787 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show mls MSFC ID Module XTAG MAC Vlans --------------- ------ ---- ----------------- -------------------- 52.0.03 15 1 01-10-29-8a-0c-00 1,10,123,434,121 222,666,959 IPX Multilayer switching enabled I ...

  • Cisco Systems 78-15328-01 - page 832

    2-788 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show ml s acl-ro ut e show mls acl-route T o display summa ries from A CL for r outing in the MLS-based Cataly st 6500 series switches, u se the show mls acl-r oute command. show mls acl-r oute Syntax D ...

  • Cisco Systems 78-15328-01 - page 833

    2-789 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show mls cef interface show mls cef interface T o display MSFC VLAN informatio n, use the sh ow mls cef i nterf ace command. show mls cef inte rface [ vlan ] Syntax Descript ion Defaults Thi s command ...

  • Cisco Systems 78-15328-01 - page 834

    2-790 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show ml s c e f in te rfa ce This e xample sho w how to display info rmation for a specif ic CEF VLAN: Console> (enable) show mls cef interface 46 Module 16: vlan 46, IP Address 46.0.0.99, Netmask 255 ...

  • Cisco Systems 78-15328-01 - page 835

    2-791 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show m l s ce f ma c show mls cef mac T o displ ay bott om interfac e adap ter (BIA ) physical M A Cs an d HSR P active virtu al MACs associated with the d esign ate d MSFC 2, use th e show mls c ef m ...

  • Cisco Systems 78-15328-01 - page 836

    2-792 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show mls cef summary show mls cef summary T o display a summary of CEF table information , use the show mls cef summary comman d. show mls cef summary Syntax D escr i pti on This comm and ha s no a rgume ...

  • Cisco Systems 78-15328-01 - page 837

    2-793 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show mls cef summary Relat e d Commands clear mls cef sho w mls cef interfa ce show mls cef mac show mls entry cef IPX r out e e ntri es N umbe r of IP X ro ut e en t ries. IP load shar ing entries Nu ...

  • Cisco Systems 78-15328-01 - page 838

    2-794 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show ml s entry show mls entry T o display state information in the M LS-based Cataly st 6500 series switches, u se the sho w mls entry comm and. show mls entry [ mod ] [ short | long ] show mls entry ip ...

  • Cisco Systems 78-15328-01 - page 839

    2-795 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show mls entry Usage Guid el i nes On swit che s configured wi th the Supe rv isor En gine 2 w it h La ye r 3 Sw it chin g Eng i ne II ( PFC2), th e display co ntai ns summa rie s d erived from t hree ...

  • Cisco Systems 78-15328-01 - page 840

    2-796 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show ml s entry The show mls entry com mand disp lays bridge d flows on a Supervisor En gine 1 when bridg ed flow statistics is enabled. T h e show mls st atistics ent ry c omma nd displa ys bridg ed f l ...

  • Cisco Systems 78-15328-01 - page 841

    2-797 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show mls entry For destinati on-only flow: Console> (enable) show mls entry ip short Destination-IP Source-IP Prot DstPrt Src Prt Destination-Mac Vlan --------------- --------------- ----- ------ - ...

  • Cisco Systems 78-15328-01 - page 842

    2-798 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show ml s entry 401.0000.0000.0401 - 00-00-04-01-00-00 401 3/1 4633 38676 Total entries: 4 Console> (enable) Console> (enable) show mls entry ipx 16 short Destination-IPX Source-IPX-net Destination ...

  • Cisco Systems 78-15328-01 - page 843

    2-799 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show mls entry 0.0.0.2 0.0.0.2 2 201 101 cc-cc-cc-cc-cc-cc 2 ARPA 0 0 01:03:21 01:00:51 cccccccc cccccccc 0.0.0.4 0.0.0.4 4 203 X cc-cc-cc-cc-cc-cc 4 ARPA 0 0 01:03:19 01:00:51 cccccccc cccccccc 0.0.0 ...

  • Cisco Systems 78-15328-01 - page 844

    2-800 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show ml s entry cef show mls entry cef T o display CEF and adjacenc y entries (and Tx statistics) for IP resolved entries an d IPX resolved or connect ed entries, us e the show mls entry cef comm and. sh ...

  • Cisco Systems 78-15328-01 - page 845

    2-801 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show mls entry cef Exam ples Th is exam ple shows how to displa y inf orma tion f or all CEF e ntrie s: Console> (enable) show mls entry cef Mod FIB-Type Destination-IP Destination-Mask NextHop-IP ...

  • Cisco Systems 78-15328-01 - page 846

    2-802 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show ml s entry cef This exam ple sh ows how to displa y adj ace ncy infor mat ion: Console> (enable) show mls entry cef ip adjacency Mod: 16 Destination-IP: 127.0.0.21 Destination-Mask: 255.255.255.2 ...

  • Cisco Systems 78-15328-01 - page 847

    2-803 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show mls entry cef Relat e d Commands clear mls cef clear mls entry cef adj acency sho w mls cef interfa ce show mls cef mac show mls cef summary Encp Next-hop destin ation e ncap sulat ion typ e (ARP ...

  • Cisco Systems 78-15328-01 - page 848

    2-804 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show ml s entry net flow-ro ut e show mls entry netflow-route T o display shortcut informatio n in the MLS-based Catalyst 6500 series switches, use the show mls entry netflow-r oute comman d. show mls en ...

  • Cisco Systems 78-15328-01 - page 849

    2-805 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show mls entry netflow-route Ente rin g th e destination ke yword speci fies the en tries matc hing the destination IP address specif ication, ent erin g th e source ke yword specifie s the entries ma ...

  • Cisco Systems 78-15328-01 - page 850

    2-806 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show ml s exclude pr otocol show mls exclude protocol T o displa y excluded pr otocols on T CP or UDP f rom being sho rtcuts, u se the show mls exclud e prot ocol comm and. show ml s exclude pr otocol Sy ...

  • Cisco Systems 78-15328-01 - page 851

    2-807 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show mls multicast show mls multicast T o display IP multicast MLS inform ation, use the show mls multi cast command. show ml s multicast show mls multicast entry {[ mod ] [ vlan vlan_id ] [ group ip_ ...

  • Cisco Systems 78-15328-01 - page 852

    2-808 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show mls mu lticast If you disab le DNS, no nam e can be speci fied or show n. A warning message is displayed if you disable the La yer 2 m ulticast protoc ol when the multicast multilaye r switching (MM ...

  • Cisco Systems 78-15328-01 - page 853

    2-809 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show mls multicast This e xample shows h ow to display statistical informa tion on a switch conf igured with the Sup ervis or Engin e 1 with Laye r 3 Switc hing Engi ne (WS-F6 K-PFC): Console> (ena ...

  • Cisco Systems 78-15328-01 - page 854

    2-810 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show mls mu lticast Receive: Feature Notifications: 0 Shortcut Messages: 0 Duplicate Shortcut Messages: 0 Shortcut Install TLV: 0 Selective Delete TLV: 0 Group Delete TLV: 0 Update TLV: 0 Input VLAN Dele ...

  • Cisco Systems 78-15328-01 - page 855

    2-811 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show mls multicast Relat e d Commands clear mls multicast statist ics Source -IP IP a dd ress o f th e sour ce that co rre sp onds to thi s f low . Pkts Num ber of pack ets switched u sing this flo w ...

  • Cisco Systems 78-15328-01 - page 856

    2-812 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show ml s nde show mls nde T o display NetFlo w Data Export informati on, use the show mls nde comm and. show ml s nde Syntax D escr i pti on This comm and has n o a rgument s. Defaults Thi s command has ...

  • Cisco Systems 78-15328-01 - page 857

    2-813 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show mls n etflow-route show mls netflow-route T o display summar ies from NetFlo w for routing in the MLS-based Catalyst 6500 series switch es, use the show mls netflow -route command . show mls netf ...

  • Cisco Systems 78-15328-01 - page 858

    2-814 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show mls pb r-route show mls pbr-route T o display statistics about polic y-based routing (PBR) traff ic, use the show ml s pbr - route command. show mls pbr -route Syntax D escr i pti on This comm and h ...

  • Cisco Systems 78-15328-01 - page 859

    2-815 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show mls stati stics show mls statistics T o display MLS statistics info rmation in the MLS-based Cata lyst 6500 seri es switches, use the show mls statistics command. show mls statistics pr otocol sh ...

  • Cisco Systems 78-15328-01 - page 860

    2-816 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show ml s statis t ics Usage Guid el i nes If your syst em is c onfigure d wit h the Sup ervis or E ngine 2 wi th Swi tc hing En gine II (PFC2) , t he show mls statistics ent ry comma nd output displays ...

  • Cisco Systems 78-15328-01 - page 861

    2-817 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show mls stati stics Exam ples Th is example sh ows how to displa y the stat ist ics for a ll prot ocol c at egories: Console> (enable) show mls statistics protocol Protocol TotalFlows TotalPackets ...

  • Cisco Systems 78-15328-01 - page 862

    2-818 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show ml s statis t ics Note Th e foll owing command s are ou tput fr om switc hes configu red wit h the Sup ervisor Engin e 1 with Lay er 3 Switchi ng Eng in e WS-F6 K-PFC. The out put from sw itche s co ...

  • Cisco Systems 78-15328-01 - page 863

    2-819 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show mls verify show mls verify T o disp lay t he Layer 3 error ch ecki ng conf igur ation, use the show mls verify command . show mls verify Syntax Descript ion This c omm and ha s no a rgume nts o r ...

  • Cisco Systems 78-15328-01 - page 864

    2-820 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show mod ule show module T o disp la y m odul e sta tus and in forma t ion, use th e show module comma nd. For supe rvis or engi nes, the show module command d ispl ays the superv iso r e ngin e n umber ...

  • Cisco Systems 78-15328-01 - page 865

    2-821 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s sh ow m o dul e Mod MAC-Address(es) Hw Fw Sw --- -------------------------------------- ------ ---------- -------------- 1 00-30-80-f7-a5-06 to 00-30-80-f7-a5-07 1.0 5.2(1) 6.1(0.12) 00-30-80-f7-a5-04 ...

  • Cisco Systems 78-15328-01 - page 866

    2-822 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show mod ule Ta b l e 2 - 4 9 describes the possible fi elds in the show module comm and out put. T able 2-49 sho w module Com mand Output F ields Field Description Mod M o dule nu mbe r . Slot Numb er o ...

  • Cisco Systems 78-15328-01 - page 867

    2-823 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show moduleinit show moduleinit T o d ispl ay c ontent s of t he i nform ation stor ed i n the sy stem m odule i niti atio n lo g, use the show moduleinit co mmand. show moduleinit [ mod ] [ log lognu ...

  • Cisco Systems 78-15328-01 - page 868

    2-824 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show mod ule init Success_Exit State 2: Entry/Exit/Elapse Time: 14721/14721/0 Success State 3: Entry/Exit/Elapse Time: 14721/32223/17502 Console> Ta b l e 2 - 5 0 describes the possible fi elds in the ...

  • Cisco Systems 78-15328-01 - page 869

    2-825 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show msfc autostate show msfcautosta te T o display the Multilayer Switc h Feature Card (MSFC) auto port state, use the show msfcautosta te comm and. show msfcauto state Syntax Descript ion This c omm ...

  • Cisco Systems 78-15328-01 - page 870

    2-826 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show ms m aut ostate show msmautosta te T o display t he current status of th e line protoco l state de termination of th e MSMs due to Catalyst 6500 series switc h port sta te ch ange s, use the show ms ...

  • Cisco Systems 78-15328-01 - page 871

    2-827 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show multicast group show multi cast group T o display the multicast group conf iguration, use the show multicast group comm and. show multicast group [ mac_addr ] [ vlan _id ] Syntax Descript ion Def ...

  • Cisco Systems 78-15328-01 - page 872

    2-828 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show mult icast gr oup Relat e d Commands clear multi cast router set multicast router show multicast r outer CoS CoS v alu e. Destination Ports or VCs List of all the ports that be lo ng to this multica ...

  • Cisco Systems 78-15328-01 - page 873

    2-829 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show multicast group count show multi cast group coun t T o show the total count of multicast addresses (g roups) in a VLAN, use th e s how multicast group c ount comm and. show multicast gr oup count ...

  • Cisco Systems 78-15328-01 - page 874

    2-830 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show mul ticast pr ot ocols st atus show multicast protocols status T o display the status of Layer 2 multicast pro tocol s on the switch, us e the sho w multic ast pr otocol s status comma nd. sho w mul ...

  • Cisco Systems 78-15328-01 - page 875

    2-831 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show multicast router show multicast router T o displa y the port s that have IGMP or RGMP -capab le rou ters assigned t o them, use the show multicast rou t er command. show multicast r outer { igmp ...

  • Cisco Systems 78-15328-01 - page 876

    2-832 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show mul ti ca st router Ta b l e 2 - 5 2 descr ibes the f ields in t he show multic ast ro uter command ou tput. Relat e d Commands set igmp set multicast router set rgmp show multicast group show multi ...

  • Cisco Systems 78-15328-01 - page 877

    2-833 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show multicast v3-group show multicast v3-group T o di splay IGM P version 3 in forma ti on ba sed on grou p I P a ddre ss, use t he show mu lti cast v3 -gro up comm and. show multicast v3-group [ vla ...

  • Cisco Systems 78-15328-01 - page 878

    2-834 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show ne ts tat show netstat T o display the current ly activ e network connections an d to list statistics for the v arious protocols in the TCP/IP , use the show netstat comman d. sho w netsta t [ tcp | ...

  • Cisco Systems 78-15328-01 - page 879

    2-835 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show net stat 69 duplicate acks 0 acks for unsent data 3468 packets (15367 bytes) received in-sequence 12 completely duplicate packets (20 bytes) 0 packets with some dup. data (0 bytes duped) 4 out-of ...

  • Cisco Systems 78-15328-01 - page 880

    2-836 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show ne ts tat This exam ple sh ows how to displ ay U DP st at istic s: Console> show netstat udp udp: 0 incomplete headers 0 bad data length fields 0 bad checksums 0 socket overflows 1116 no such por ...

  • Cisco Systems 78-15328-01 - page 881

    2-837 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show net stat Ta b l e 2 - 5 4 descri bes the f ields in t he show netsta t udp comman d o ut pu t. This example shows how to displa y IP sta tistics: Console> show netstat ip ip: 76894 total packe ...

  • Cisco Systems 78-15328-01 - page 882

    2-838 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show ne ts tat This example shows how to display I CMP sta tistics: Console> show netstat icmp icmp: Redirect enabled 0 calls to icmp_error 0 errors not generated 'cuz old message was icmp Output ...

  • Cisco Systems 78-15328-01 - page 883

    2-839 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show net stat This exam ple sh ows how to displa y the IP r out ing ta ble: Console> show netstat routes DESTINATION GATEWAY FLAGS USE INTERFACE default 172.16.1.201 UG 6186 sc0 172.16.0.0 172.16.2 ...

  • Cisco Systems 78-15328-01 - page 884

    2-840 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show ne ts tat Ta b l e 2 - 5 8 descr ibes the f ields in t he sho w nets tat interfac e command o u tput. Relat e d Commands set interface set ip route T able 2-58 sho w netstat int erfac e Command O ut ...

  • Cisco Systems 78-15328-01 - page 885

    2-841 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show ntp show ntp T o displa y the curren t NTP status, us e the show ntp command . show ntp Syntax Descript ion This c omm and ha s no a rgume nts o r keywords. Defaults Thi s command has no de fa ul ...

  • Cisco Systems 78-15328-01 - page 886

    2-842 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show ntp Relat e d Commands clear ntp ser ver set ntp broadcastclie nt set ntp broadcastdelay set ntp client set ntp serv er ...

  • Cisco Systems 78-15328-01 - page 887

    2-843 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show pbf show pbf T o display PBF-related information , use the show pbf comman d. show pbf [{ adjace ncy | statist ics | map } [ adj_na me ]] Syntax Descript ion Defaults Thi s command has no de fa u ...

  • Cisco Systems 78-15328-01 - page 888

    2-844 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show pb f ------------------------------------------------------------------ 1 2 00-0a-0a-0a-0a-0a 00-11-22-33-44-55 a_1 Console> This exampl e sh ows how to displa y sta tistic s for PFC2: Console> ...

  • Cisco Systems 78-15328-01 - page 889

    2-845 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show pbf-map show pbf-map T o display PBF map information, use the show pbf- map co mmand . show pbf-map { vla n | config } Syntax Descript ion Defaults Thi s command has no de fa ult set tings. Comma ...

  • Cisco Systems 78-15328-01 - page 890

    Chapter 2 Catalyst 6 500 Series Swi tch and ROM M onitor Commands show port 2-846 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 22 show port T o disp lay port st atus infor matio n, use the show port comman d. show port [ mod [ /port ]] Syntax Descript ion Defaults Thi s command has no de fa ult set tings. Comma nd T ypes ...

  • Cisco Systems 78-15328-01 - page 891

    2-847 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port Exam ples Th is example shows how to display the status an d counte rs for a speci fic module and por t: Console> show port 2/1 * = Configured MAC Address Port Name Status Vlan Duplex Spe ...

  • Cisco Systems 78-15328-01 - page 892

    2-848 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show po rt Port Security Violation Shutdown-Time Age-Time Max-Addr Trap IfIndex ----- -------- --------- ------------- -------- -------- -------- ------- 9/5 disabled shutdown 0 0 1 disabled 126 Port Num ...

  • Cisco Systems 78-15328-01 - page 893

    2-849 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port 7/8 enable 00-10-7b-00-0a-5f (Port host processor not online) Port Call-Manager(s) DHCP-Server TFTP-Sever Gateway -------- ----------------- --------------- --------------- --------------- 7 ...

  • Cisco Systems 78-15328-01 - page 894

    2-850 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show po rt 3/8 onhook 1 full 64k FXS 3/9 onhook 1 full 64k FXS 3/10 onhook 1 full 64k FXS 3/11 onhook 1 full 64k FXS 3/12 onhook 1 full 64k FXS 3/13 onhook 1 full 64k FXS 3/14 onhook 1 full 64k FXS 3/15 ...

  • Cisco Systems 78-15328-01 - page 895

    2-851 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port Vlan VLANs to which the port belon gs. Auxiliaryvla n 1 Auxiliar y VLANs to which the port belongs. Dupl ex Dupl ex setting f or the po rt ( aut o, fu ll, h alf) . Speed Speed setti ng f or ...

  • Cisco Systems 78-15328-01 - page 896

    2-852 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show po rt Multi-Coll Number of times multiple collisions oc curred before the port tra nsmitted a frame to the med ia succ essfully . Late-Coll Number of late collisio ns (collision s outside the collis ...

  • Cisco Systems 78-15328-01 - page 897

    2-853 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port Relat e d Commands set port disable set port enable show port status Good-by tes T o tal number of octets in frames with no erro r . Short- ev e nt Nu mber of short ev e nts rece ived. Inl i ...

  • Cisco Systems 78-15328-01 - page 898

    2-854 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show po rt arp-insp ection show port a rp-inspection T o di splay the drop thr eshol d an d shutdown t hres hol d for sp eci fic por ts, u se the show port arp-inspection comman d. show port a rp-inspect ...

  • Cisco Systems 78-15328-01 - page 899

    2-855 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port au xiliaryv lan show port auxiliaryvlan T o display the port auxiliary VLAN status f or a sp ecif ic port, use the sho w port aux ili aryv lan comm and. sho w port auxili aryvlan { vlan | un ...

  • Cisco Systems 78-15328-01 - page 900

    2-856 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show po rt au xiliaryvl an This exam ple sh ows how to displa y the status of t he sw itch tha t d oes no t send any aux ilia ry V LAN information in the CDP packets: Console> (enable) show port auxil ...

  • Cisco Systems 78-15328-01 - page 901

    2-857 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port br oad ca st show port b roadcast T o display broadcast information, use the show port br oadcast comma nd . show port broadcast [ mod [ /port ]] Syntax Descript ion Defaults Thi s command h ...

  • Cisco Systems 78-15328-01 - page 902

    2-858 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show po rt br oadcas t Relat e d Commands set port broadcast T ota l-Drop Number of broadcast , multic ast, an d unicast pac kets droppe d because the port bro adcast l imit was exc eeded. V iola tion Ac ...

  • Cisco Systems 78-15328-01 - page 903

    2-859 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port capabilities show port c apabilities T o display the capabilit ies on the ports, use the show port capabilit ies comm and. show port capabilities [ mo d [/ port ]] Syntax Descript ion Defaul ...

  • Cisco Systems 78-15328-01 - page 904

    2-860 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show po rt ca pabilitie s This e xample shows th e port capabilities on a 48-port 10/10 0B ASE-TX switching services configured -modul e: Console> show port capabilities 3/2 Model WS-X6248-RJ-45 Port ...

  • Cisco Systems 78-15328-01 - page 905

    2-861 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port capabilities This e xample sho ws the port capabi lities on a 24- port FXS anal og station interf ace services-conf igured module : Console> show port capabilities 3/2 Model WS-X6624-FXS ...

  • Cisco Systems 78-15328-01 - page 906

    2-862 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show po rt ca pabilitie s Ta b l e 2 - 6 3 describe s the possible fi elds (depen ding on the type of port que ried) and the v alues in th e show port capabilities command ou tput . T able 2-63 sho w por ...

  • Cisco Systems 78-15328-01 - page 907

    2-863 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port capabilities Relat e d Commands set port broadcast set port channel set po rt s ec u rity set port spee d set spantree portf ast set trunk show port show port voice active ...

  • Cisco Systems 78-15328-01 - page 908

    2-864 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show po rt cd p show po rt cd p T o display the port CDP enable state and the message interv al, use the show port cdp command . show port cdp [ mod [ /port ]] Syntax D escr i pti on Defaults Thi s comma ...

  • Cisco Systems 78-15328-01 - page 909

    2-865 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s sho w po r t cd p Ta b l e 2 - 6 4 descri bes the f ields in t he show port c dp command o utput. Relat e d Commands set cdp show cdp T able 2-64 sho w por t cdp Comma nd Output Fie lds Field Descript ...

  • Cisco Systems 78-15328-01 - page 910

    2-866 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show po rt ch annel show port c hannel T o disp lay Ether Chan nel inf ormation , use the show port channe l command . show port channel [ all | mod [ /port ]] [ statistics ] show port channel [ all | mo ...

  • Cisco Systems 78-15328-01 - page 911

    2-867 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port c hannel Exam ples Th is exampl e sh ows how to displ ay E the rne t ch ann eli ng i nfo rmat ion fo r modu le 1: Console> show port channel 1 Port Status Channel Admin Ch Mode Group Id - ...

  • Cisco Systems 78-15328-01 - page 912

    2-868 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show po rt ch annel priority vlanpri vlanpri-vlans ----- -------- -------- ------- ------------------------------------------------ 1/1 32 disabled 0 1/2 32 disabled 0 Port IP IPX Group ----- -------- -- ...

  • Cisco Systems 78-15328-01 - page 913

    2-869 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port c hannel 3/4 enabled normal disabled Console> Console> (enable) show port channel 1 info gvrp Port GVRP GVRP GVRP status registeration applicant ----- -------- ------------- --------- ...

  • Cisco Systems 78-15328-01 - page 914

    2-870 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show po rt ch annel Speed S pee d set ting for the port (aut o, 1 0, 10 0, 10 00) . Dupl ex Duplex sett ing for the por t (auto, full, half). Vlan VLAN to which t he port belongs. Port priority Priority ...

  • Cisco Systems 78-15328-01 - page 915

    2-871 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port c hannel Relat e d Commands set port channel show channel sho w chann el gr oup GVRP regist ration Sta tus of the ad ministra tive contro l of an outbo und port (nor mal, fixed, forbidden). ...

  • Cisco Systems 78-15328-01 - page 916

    2-872 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show po rt co ps show port c ops T o display COPS informati on on all or individual port s, use the show port cops comm and. show po rt co ps [ mod [ /port ]] Syntax D escr i pti on Defaults Thi s comman ...

  • Cisco Systems 78-15328-01 - page 917

    2-873 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port cops This example shows how to display COPS info rmation fo r a specific port: Console> show port cops 1/1 Port Admin Roles Oper Roles ------ ------------------------------- ------------- ...

  • Cisco Systems 78-15328-01 - page 918

    2-874 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show po rt co unters show port c ount ers T o sho w all the counters for a port, u se the show port count ers command. show port counters [ mod [ /port ]] Syntax D escr i pti on Defaults Thi s command ha ...

  • Cisco Systems 78-15328-01 - page 919

    2-875 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show por t count ers Ta b l e 2 - 6 7 describ es the possib le fields (de pending on the port t ype que ried) in the show port counters comm an d o utpu t. Relat e d Commands clear co unters show port ...

  • Cisco Systems 78-15328-01 - page 920

    2-876 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show po rt de bounce show port d ebounce T o displa y whether the port debo unce tim ers are enabled or disa bled, use the show port debounce comm and. show port debounce [ mod | m od/ port ] Syntax D es ...

  • Cisco Systems 78-15328-01 - page 921

    2-877 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port dot1q-all-tagged show port d ot1q-all-tagged T o sho w the status of the dot1q-a ll-tagged featur e on all or specif ic ports, use the show port dot1q-all-tagged com mand. show port dot1q-al ...

  • Cisco Systems 78-15328-01 - page 922

    2-878 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show po rt do t1q-ethe rty pe show port d ot1q-ethertyp e T o s how the stat us of t he 8 02. 1q Eth erty pe field on a ll or spe c ific port s, us e the show port dot1q-ethertype comm and. show port do ...

  • Cisco Systems 78-15328-01 - page 923

    2-879 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show po r t do t 1qtu nne l show port d ot1qtunnel T o di splay the dot1q tun nel mo de sta tus, use the show port dot1qtunnel command. show port do t1qtunnel [ mod [ /port ]] Syntax Descript ion Defa ...

  • Cisco Systems 78-15328-01 - page 924

    2-880 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show po rt do t1x show po rt dot1x T o displa y all the conf igurable and current sta te values as sociated wit h the authenti cator port access entity (P AE) and bac kend authentic ator and statisti cs ...

  • Cisco Systems 78-15328-01 - page 925

    2-881 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show po rt dot1 x Th i s ex am pl e displays the statis tics of different types of EAP p acket s th at are transmitted and received by the authenticator on a specific port: Console> show port dot1x ...

  • Cisco Systems 78-15328-01 - page 926

    2-882 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show po rt er rdisable -timeout show port e rrdisable-ti meout T o displa y the c onfiguration and st atus of t he errd isable time out for a particu lar port , use th e show port errdisable -timeout com ...

  • Cisco Systems 78-15328-01 - page 927

    2-883 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show por t errdi sable-t imeout This e xample sho ws the outp ut for a port in errdisabled s tate with the tim eout flag disabled an d the reason di sabled : Console> show port errdisable-timeout 3 ...

  • Cisco Systems 78-15328-01 - page 928

    2-884 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show po rt f low c ontrol show port fl owcontrol T o display per- port status inf ormation and statistics rela ted to fl ow control, us e the show port flowcont rol command. sh ow po r t fl ow c on tro l ...

  • Cisco Systems 78-15328-01 - page 929

    2-885 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show por t flowcontr ol Ta b l e 2 - 6 8 descri bes the f ields in t he sh ow p o rt fl owc o nt rol command out put. Relat e d Commands set po rt f lowco n trol T able 2-68 sho w port flow control Co ...

  • Cisco Systems 78-15328-01 - page 930

    2-886 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show po rt i nli ne power show port in linepower T o display the port power admini strati on and opera tional status, use the show po rt i nl i nep ower comm and. show port inlinepo wer [ mod [ / port ]] ...

  • Cisco Systems 78-15328-01 - page 931

    2-887 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s sh ow po rt jumb o show port jumbo T o display th e jumbo fram e setting s for all port s with the feat ure enabled, use the show port jumbo comm an d. show port jumbo Syntax Descript ion This c omm a ...

  • Cisco Systems 78-15328-01 - page 932

    2-888 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show po rt l 2pr otocol-t unn el show port l2 pro tocol-tun nel T o di splay Lay er 2 pr otoc ol tu nnel ing info rma tion on a po rt or ra nge o f por ts, u se the show port l2protocol-tunnel command . ...

  • Cisco Systems 78-15328-01 - page 933

    2-889 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port lacp -channel show port la cp-channel T o display inform ation about LA C P channels b y port or module numb er , use the sho w port lacp-channel comman d. show port la cp-channel [ mod [/ p ...

  • Cisco Systems 78-15328-01 - page 934

    2-890 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show po rt l acp -channe l This exam ple sh ows how to displa y LACP channe l inf orm atio n f or all por ts on m odu le 4: Console> show port lacp-channel 4 Port Channel Admin Ch Partner Oper Partner ...

  • Cisco Systems 78-15328-01 - page 935

    2-891 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port lacp -channel This exam ple shows how to displ ay L ACP channel st at istic s for po rt 7 on m odule 4: Console> show port lacp-channel 4/7 statistics Port Admin LACP Pkts LACP Pkts Marke ...

  • Cisco Systems 78-15328-01 - page 936

    2-892 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show po rt mac show port mac T o displ ay po rt MA C coun ter inf ormation , use the show port mac com mand. show port mac [ mod [ / po rt ]] Syntax D escr i pti on Defaults Thi s command has no de fa ul ...

  • Cisco Systems 78-15328-01 - page 937

    2-893 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show p ort mac Ta b l e 2 - 6 9 describes the possible fie lds in the show p ort ma c comman d outpu t. Relat e d Commands clear co unters T able 2-69 sho w por t mac Command O utput Fields Field Desc ...

  • Cisco Systems 78-15328-01 - page 938

    2-894 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show po rt mac -addres s show port mac-add ress T o displa y the MA C address as sociat ed with a ph ysical por t or ports, use th e show port mac-address comm and. show port mac-address [ mod [/ port ]] ...

  • Cisco Systems 78-15328-01 - page 939

    2-895 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s sh ow po rt mac -ad d re ss Port Mac address ----- ---------------------- 5/1 00-d0-d3-33-80-9c 5/2 00-d0-d3-33-80-9d . . . 5/48 00-d0-d3-33-80-cb Port Mac address ----- ---------------------- 7/1 00- ...

  • Cisco Systems 78-15328-01 - page 940

    2-896 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show po rt ne gotiati on show port n egotiation T o di splay the link n egotiat ion pro toco l se ttin g f or t he sp ec ified por t, use t he show port negot iation comm and. show port negotiation [ mo ...

  • Cisco Systems 78-15328-01 - page 941

    2-897 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port p rbs show po rt pr bs T o di splay the por ts t hat are r unn ing t he Pseu do Rando m Bina ry Seque nce (PRB S) te st and t o di spla y the counter v alues for ports on which the test has ...

  • Cisco Systems 78-15328-01 - page 942

    2-898 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show po rt pr otocol show port p rotocol T o v iew proto col filters co nfigured on the E the rChan ne l por ts , use the show port protocol co mmand. show port protocol [ mo d [/ port ]] Syntax D escr i ...

  • Cisco Systems 78-15328-01 - page 943

    2-899 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port qo s show po rt qo s T o display QoS-related info rmation, use the show port qos comman d. show port qo s [ mo d [ /po rt ]] Syntax Descript ion Defaults Thi s command has no de fa ult set t ...

  • Cisco Systems 78-15328-01 - page 944

    2-900 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show po rt qo s Runtime: Port ACL name Type ----- -------------------------------- ---- No ACL is mapped to port 2/1. Console> This e xample sho ws how to display QoS-related inf ormation for a single ...

  • Cisco Systems 78-15328-01 - page 945

    2-901 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port qo s Config: Port ACL name Type ----- -------------------------------- ---- No ACL is mapped to port 4/1. Runtime: Port ACL name Type ----- -------------------------------- ---- No ACL is ma ...

  • Cisco Systems 78-15328-01 - page 946

    2-902 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show po rt rsvp show port rsvp T o di splay RSVP i nforma ti on on a per- por t basi s, us e the show po rt rsvp command . sho w port rs vp [ mod [ /port ]] Syntax D escr i pti on Defaults Thi s command ...

  • Cisco Systems 78-15328-01 - page 947

    2-903 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show po r t se cur ity show port se curity T o vie w port security conf iguration informatio n and statistics, u se the sho w port se curity co mmand. sho w port security [ mod [ /port ]] sho w port s ...

  • Cisco Systems 78-15328-01 - page 948

    2-904 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show po rt s ecu rity Port Secure-Src-Addrs Age-Left Last-Src-Addr Shutdown Shutdown-Time-Left ---- ----------------- -------- ----------------- -------- ------------------ 4/1 00-11-22-33-44-55 60 00-11 ...

  • Cisco Systems 78-15328-01 - page 949

    2-905 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show po r t se cur ity This e xample shows ho w to display security statistical informati o n for a specific module : Console> show port security statistics 2 Port Total-Addrs Maximum-Addrs ----- - ...

  • Cisco Systems 78-15328-01 - page 950

    2-906 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show po rt s pan tree show port sp antree T o v iew port spa nnin g t ree in for ma tio n, us e th e show port spantree command. sho w port sp antr ee [ mo d [ /port ]] Syntax D escr i pti on Defaults Th ...

  • Cisco Systems 78-15328-01 - page 951

    2-907 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port sta tus show port st atus T o disp lay port st atus infor matio n, use the show port status co mma nd. show port status [ mo d [ /port ]] Syntax Descript ion Defaults Thi s command has no de ...

  • Cisco Systems 78-15328-01 - page 952

    2-908 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show po rt sync-re start-de lay show port sync-restart-delay T o display a port’ s synchronization restar t delay , use the sho w port syn c-r estart-d elay co mmand . sho w port sync-r estart-delay mo ...

  • Cisco Systems 78-15328-01 - page 953

    2-909 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show po r t tdr show port tdr T o display the results of the T ime Domain Reflectometer (TDR) test on a port , use the show port t dr comm and. show port tdr [ mo d [ /port ]] Syntax Descript ion Defa ...

  • Cisco Systems 78-15328-01 - page 954

    2-910 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show po rt t dr Port Speed Local pair Pair length Remote pair Pair status ---- ------ ---------- ----------------------- ----------- ------------ 5/3 1000 Pair A running tdr test n/a n/a Pair B running t ...

  • Cisco Systems 78-15328-01 - page 955

    2-911 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show po rt trap show port trap T o disp lay port t rap stat us, use the show port trap comman d. show port trap [ mod [ /port ]] Syntax Descript ion Defaults Thi s command has no de fa ult set tings. ...

  • Cisco Systems 78-15328-01 - page 956

    2-912 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show po rt t runk show port trunk T o display port trun k information, use th e show port trunk co mm an d. show port t runk [ mo d [ /port ]] Syntax D escr i pti on Defaults Thi s command has no de fa u ...

  • Cisco Systems 78-15328-01 - page 957

    2-913 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show p ort trun k Ta b l e 2 - 7 2 descri bes the f ields in t he show port t runk command outpu t. Relat e d Commands set trunk T able 2-72 sho w port tr unk Command Output F ields Field Description ...

  • Cisco Systems 78-15328-01 - page 958

    2-914 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show po rt un icast-f lood show port unicast-flood T o d isplay the run -time c onfigurat ion o f the po rt u s ing unic ast floo d b lock ing, us e the show port unicast-flood comm and. show port unicas ...

  • Cisco Systems 78-15328-01 - page 959

    2-915 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show po rt voice show port voice T o display vo ice port informat ion, use the show po rt voi ce co mmand . sho w port v oice [ noalias ] Syntax Descript ion Defaults Thi s command has no de fa ult se ...

  • Cisco Systems 78-15328-01 - page 960

    2-916 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show po rt v oic e Port DNS-Server(s) Domain -------- ----------------- ------------------------------------------------- 7/1 dns-sj3.cisco.c* cisco.com dns-sj4.cisco.c 7/2 dns-sj3.cisco.c* cisco.com dns ...

  • Cisco Systems 78-15328-01 - page 961

    2-917 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show po rt voice 7/5 10.34.1.11* - 10.34.1.11 10.34.10.1 10.34.16.10 10.34.42.11 (*):Primary Port DNS-Server(s) Domain -------- ----------------- ------------------------------------------------- 7/1 ...

  • Cisco Systems 78-15328-01 - page 962

    2-918 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show po rt voice ac tive show port vo ice active T o displa y acti ve call inform ation on a port, use the show port voice active co mman d. show port voice active [ mo d/po rt ] [ al l | call | conf ere ...

  • Cisco Systems 78-15328-01 - page 963

    2-919 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show por t voice act ive Exam ples T h is ex am p l e s h ow s how t o d i s p l a y a ll calls (regular calls, conference calls, an d transcoding calls) in the system: Console> show port voice act ...

  • Cisco Systems 78-15328-01 - page 964

    2-920 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show po rt voice ac tive Fax Transmit Duration : 332433 Hi Water Playout Delay : 23004 ms Logical If index : 4 Low water playout delay : 234 ms Receive delay : 23423 ms Receive bytes : 2342342332423 Rece ...

  • Cisco Systems 78-15328-01 - page 965

    2-921 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show por t voice act ive Low water playout delay : 234 ms Receive delay : 23423 ms Receive bytes : 2342342332423 Receive packets : 23423423402384 Transmit bytes : 23472377 Transmit packets : 94540 Con ...

  • Cisco Systems 78-15328-01 - page 966

    2-922 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show po rt v oic e fdl show port vo ice fdl T o display the fac ilities data link (FDL) s tat is tic s for the specif ied ports, use the show port voice fd l comm and. sho w port v oice f dl [ mod [ /por ...

  • Cisco Systems 78-15328-01 - page 967

    2-923 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show po rt v o ice f dl Ta b l e 2 - 7 3 descri bes the pos sible fields (d epen ding on th e port ty pe queri ed) in th e s h ow p or t voi ce f dl comm an d o utpu t. Relat e d Commands sho w port v ...

  • Cisco Systems 78-15328-01 - page 968

    2-924 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show po rt v oic e interfa ce show port vo ice interf ace T o d i s p l a y t h e port vo ice interface configuration, us e t h e show port voic e interfac e command. show port voice interf ace [ mod [ / ...

  • Cisco Systems 78-15328-01 - page 969

    2-925 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show proc show proc T o display CPU, memory allocatio n, and process utilizatio n information, use the show pr oc co mmand . show pr oc [ cpu | mem ] Syntax Descript ion Defaults Thi s command has no ...

  • Cisco Systems 78-15328-01 - page 970

    2-926 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show pro c Memory Pool Utilization Memory Pool Type 1Min 5Min 10Min ---------------- ----- ----- ----- DRAM 49% 49% 49% FLASH 82% 82% 82% NVRAM 49% 49% 49% MBUF 2% 2% 2% CLUSTER 12% 12% 12% MALLOC 15% 15 ...

  • Cisco Systems 78-15328-01 - page 971

    2-927 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show proc 44 -2 16 0 16 Backend_Rx 45 -2 16 0 16 Backend_SM 46 -2 3216 2992 224 Debug Port Coun 47 -2 16 0 16 SysLogTask 48 -2 112 0 112 pinggateA 49 -2 8704 8000 704 cdpd 50 -2 124576 124416 160 cdpd ...

  • Cisco Systems 78-15328-01 - page 972

    2-928 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show pro c 5Min A verage me mory poo l usage o ver the last 5-min ute int erv al. 10Mi n A vera ge m em ory p ool usa ge over the last 10 -min ute in terval. TTY TTY as soci ated with t he process. Proce ...

  • Cisco Systems 78-15328-01 - page 973

    2-929 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show pro tocolfilter show proto colfilter T o list whether proto col filte r ing is enabled or disab led, use the show pr ot ocolfilter com mand. sho w pro tocol f ilter Syntax Descript ion This c omm ...

  • Cisco Systems 78-15328-01 - page 974

    2-930 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show pvla n show pvlan T o s how th e co nfigur ati on fo r a given private VLA N, u se t he show pvlan command. show pvlan [ vlan | primary | isol ated | community | twoway-com munity ] Syntax D escr i ...

  • Cisco Systems 78-15328-01 - page 975

    2-931 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show pvlan Console> This e x ample sho ws how to display the status for all VLANs set as commun ity: Console> show pvlan community Primary Secondary Secondary-Type Ports ------- --------- ------ ...

  • Cisco Systems 78-15328-01 - page 976

    2-932 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show pvla n capabi li ty show pvlan capability T o d eterm i ne w het he r or not a por t c an be ma de a p riv ate port, us e the show pvlan capability comm and. show pvlan capability mod/port Syntax D ...

  • Cisco Systems 78-15328-01 - page 977

    2-933 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show pvlan capability Console> (enable) show pvlan capability 5/3 Ports 5/1 - 5/12 are in the same ASIC range as port 5/3. Port 5/3 cannot be made a private vlan port due to: ---------------------- ...

  • Cisco Systems 78-15328-01 - page 978

    2-934 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show pvla n mappin g show pvlan mappi ng T o s how the private VLAN map pi ng s configu re d o n pro mi sc uous po rts, use t h e show pvlan mapping comm an d. show pvlan mapping [ priv ate_ vlan | mod/ ...

  • Cisco Systems 78-15328-01 - page 979

    2-935 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show pvlan mapp ing Relat e d Commands clear co nfi g pvlan clear pvlan mapping clea r vlan set pvlan set pvlan mapping set vlan show vlan ...

  • Cisco Systems 78-15328-01 - page 980

    2-936 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show qo s acl ed it buf fer show qos acl editbuffer T o display A CL names in the edit buf fer , use the show qo s acl editbuffer command. show qos acl editbuffer Syntax D escr i pti on This comm and has ...

  • Cisco Systems 78-15328-01 - page 981

    2-937 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show qos acl info show qos acl in fo T o display QoS A C L information, use the show qos acl info comman d. show qos acl info default-action { ip | ipx | mac | all } show qos acl inf o runtime { ac l_ ...

  • Cisco Systems 78-15328-01 - page 982

    2-938 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show qo s acl info 2. set qos acl ip my_ip_acl trustdscp microflow my-micro aggregate agg tcp 173.22.3.4 255.0.0.0 eq port 19 173.22.20.1 255.255.255.0 tos 5 ACL status: Not Committed Console> (enable ...

  • Cisco Systems 78-15328-01 - page 983

    2-939 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show qos acl map show qos acl map T o display the ACL mapping inform ation, use the show qos acl map command. show qos acl map { config | runtime } { acl_n ame | mod/po rt | vlan | all } Syntax Descri ...

  • Cisco Systems 78-15328-01 - page 984

    2-940 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show qo s acl map This e xample shows h ow to display information for a specif ic ACL: Console> show qos acl map isp1 ACL name Vlan # Ports -------- ---------------- --------------- isp1 2 1/1 Console ...

  • Cisco Systems 78-15328-01 - page 985

    2-941 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show qos acl resource- usage show qos acl resou rce-us age T o disp lay ACL ma nage ment in forma tion, use t he show qos acl resour ce-usage comman d. show qos acl r esource-usage Syntax Descript ion ...

  • Cisco Systems 78-15328-01 - page 986

    2-942 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show qo s bri dged-m icroflow -polici ng show qos bridged -microflow-p olicing T o disp lay th e VLAN-bri dged pack et- polic ing stat us, u se the show qos bridged-packet-policing comm and. show qos bri ...

  • Cisco Systems 78-15328-01 - page 987

    2-943 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show qos info show qos info T o display QoS-related information for a specif ied port, use the sho w qos i nf o com mand. show qos inf o { runtime | co nfig } { mod / port } show qos info conf ig port ...

  • Cisco Systems 78-15328-01 - page 988

    2-944 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show qo s info The num ber pr eceding the p lette r in the port_type value (for ex ample, 1p2q2t and 1p1q4t ) determines the threshold in the prio rity queue. The 1p2q1t an d 1p1q8t po rt t ype s a re n ...

  • Cisco Systems 78-15328-01 - page 989

    2-945 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show qos info This exam ple sh ows how to displ ay a ll Q oS- relat ed NV RA M thr esh old info rmat ion: Console> (enable) show qos info config 2q2t tx QoS setting in NVRAM for 2q2t transmit: QoS ...

  • Cisco Systems 78-15328-01 - page 990

    2-946 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show qo s info This exam ple sh ows anothe r di splay of the cur rent QoS ru nti me inf orm ation : Console> show qos info runtime 8/1 Run time setting of QoS: QoS is enabled Policy Source of port 8/1 ...

  • Cisco Systems 78-15328-01 - page 991

    2-947 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show qos info This exam ple shows how to di splay t he cu rrent QoS c onfigurat ion i nfor ma tion: Console> (enable) show qos info config 8/1 QoS setting in NVRAM: QoS is disabled Port 8/1 has 3 t ...

  • Cisco Systems 78-15328-01 - page 992

    2-948 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show qo s info This exam ple shows anothe r di sp lay of the c urre nt QoS c onfigurati on i nf ormat ion : Console> (enable) show qos info config 1p2q2t tx QoS setting in NVRAM for 1p2q2t transmit: Q ...

  • Cisco Systems 78-15328-01 - page 993

    2-949 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show qos mac-cos show qos mac-cos T o display the currently con figur ed QoS-related information f or the MA C address and VLAN pa ir , use the show qos mac-cos command . show qos mac-cos des t_mac [ ...

  • Cisco Systems 78-15328-01 - page 994

    2-950 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show qo s mac-cos Relat e d Commands clea r q o s m a c- co s set qos mac- cos ...

  • Cisco Systems 78-15328-01 - page 995

    2-951 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show qos map s show qos maps T o di splay the mappi ng o f d i fferent ma ps, us e the show qos maps comman d. show qos maps { conf ig | runtime } [[ cos-dsc p-map | ippr ec-dscp-map | dscp-cos-map | ...

  • Cisco Systems 78-15328-01 - page 996

    2-952 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show qo s maps This exam ple shows how to di spla y the ip prec -ds cp-ma p map: Console> show qos maps ipprec-dscp-map IP-Precedence - DSCP map: IP-Prec DSCP ------- ------------------- 0 1 ... 7 52 ...

  • Cisco Systems 78-15328-01 - page 997

    2-953 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show qos map s DSCP policed-dscp map: In-profile DSCP Policed DSCP --------------- ------------- 0-20 0 Console> This exam ple sh ows how to displa y n orm al- rat e maps: Console> (enable) show ...

  • Cisco Systems 78-15328-01 - page 998

    2-954 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show qo s policer show qos poli cer T o displ ay micr oflow or a ggreg ate pol icers cu rrently conf igured, use the show qos policer comm and. show qos policer { config | runtime } { mi croflo w [ polic ...

  • Cisco Systems 78-15328-01 - page 999

    2-955 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show qos p olicer -------------------- ----------------------------------------------- my-micro my-acl Console> This exam ple sh ows how to displa y agg regate po lici ng i nfo rmat ion: Console> ...

  • Cisco Systems 78-15328-01 - page 1000

    2-956 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show qo s policy -source show qos policy-source T o di splay the QoS po licy sour ce i nfor ma tio n, us e the show qos policy-source comman d. show qos policy-sour c e Syntax D escr i pti on This comm a ...

  • Cisco Systems 78-15328-01 - page 1001

    2-957 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show qos rsvp show qos rsvp T o display RSVP information, use the show qos r svp command. show qos rsvp { info | flo w-inf o } Syntax Descript ion Defaults Thi s command has no de fa ult set tings. Co ...

  • Cisco Systems 78-15328-01 - page 1002

    2-958 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show qo s statist ics show qos statistics T o displa y the var ious QoS-r elated counters for a speci fied por t, use the sh ow qos s tatis tic s co mmand. show qos statistics { mod [ /p ort ]} show qos ...

  • Cisco Systems 78-15328-01 - page 1003

    2-959 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show qos stati stics This exampl e sh ows how to displa y the Qo S sta tistic s for mo dule 2: Console> (enable) show qos statistics 2 Warning: QoS is disabled. On Transmit:Port 2/1 has 2 Queue(s) ...

  • Cisco Systems 78-15328-01 - page 1004

    2-960 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show qo s statist ics export info show qos statistics export info T o displa y QoS data export configurati on and stati stical in format ion, use t he show qos st atistics export inf o comman d. show qos ...

  • Cisco Systems 78-15328-01 - page 1005

    2-961 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show qos stat us show qos status T o d i sp l ay if QoS is enabled on the switch, u s e t h e show qo s status comm and. show qos status Syntax Descript ion This c omm and ha s no keywords or argume n ...

  • Cisco Systems 78-15328-01 - page 1006

    2-962 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show radi us show radius T o disp lay co nf igured RAD IUS par ameters, u se the sho w radius comma nd. show radi us [ noalias ] Syntax D escr i pti on Defaults Thi s command has no de fa ult set tings. ...

  • Cisco Systems 78-15328-01 - page 1007

    2-963 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show radius Relat e d Commands set radius attribute set radius deadtime set radius key set radius retransmit set r adi us s erver set radius timeout ...

  • Cisco Systems 78-15328-01 - page 1008

    2-964 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show rcp show rcp T o display rcp informatio n, use the sho w r cp command . show r cp Syntax D escr i pti on This comm and has n o keywords or a rgument s. Defaults Thi s command has no de fa ult set ti ...

  • Cisco Systems 78-15328-01 - page 1009

    2-965 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show reset show reset T o display scheduled reset information, use th e show r eset comman d. show r eset Syntax Descript ion This c omm and ha s no keywords or argume nts. Defaults Thi s command has ...

  • Cisco Systems 78-15328-01 - page 1010

    2-966 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show rgm p group show rgmp group T o displa y all mult icast groups or the c ount of m ulticast g roups that are jo ined b y RGMP-cap able router s, use the show rgmp group command . show r g mp group [ ...

  • Cisco Systems 78-15328-01 - page 1011

    2-967 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show rgmp stati stics show rgmp statistics T o displa y all the RGMP-re lated statis tics for a gi ven VLAN, use the show rgmp statistics command. show r gmp statistics [ vlan ] Syntax Descript ion De ...

  • Cisco Systems 78-15328-01 - page 1012

    2-968 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show rspan show rspan T o display the remote SP AN configura tion, use the show rspan comman d. show rspan Syntax D escr i pti on This comm and has n o keywords or a rgument s. Defaults Thi s command has ...

  • Cisco Systems 78-15328-01 - page 1013

    2-969 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s sho w r s pan Destination : Port 6/1 Rspan Vlan : 906 Admin Source : - Oper Source : - Direction : - Incoming Packets: disabled Learning : - Multicast : - Filter : - ---------------------------------- ...

  • Cisco Systems 78-15328-01 - page 1014

    2-970 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show run ni ng-conf ig show running-con fig T o display the conf iguration informatio n currently runn ing on the switch or the conf iguration for a specif ic A C L, use the show running-config comman d. ...

  • Cisco Systems 78-15328-01 - page 1015

    2-971 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show runni ng-conf ig # ***** NON-DEFAULT CONFIGURATION ***** ! ! #time: Mon Jun 11 2001, 08:22:17 ! #version 6.3(0.56)PAN ! ! #! #vtp set vtp domain dan set vtp mode transparent set vlan 1 name defau ...

  • Cisco Systems 78-15328-01 - page 1016

    2-972 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show run ni ng-conf ig set vlan 11 3/2 ! #module 4 empty ! #module 5 : 0-port Switch Fabric Module ! #module 6 empty ! #module 7 empty ! #module 8 empty ! #module 9 empty ! #module 15 empty ! #module 16 ...

  • Cisco Systems 78-15328-01 - page 1017

    2-973 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show securit y acl show security acl T o displa y the co ntents of the VACL that are c urrently c o nfigured or last c ommitted t o NVRAM and hardwa re, use th e show security acl comman d. show secur ...

  • Cisco Systems 78-15328-01 - page 1018

    2-974 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show s ecur ity ac l ipx1 IPX Committed ipx2 IPX Committed ipx3 IPX Committed mac2 MAC Committed iplast IP Committed Console> This e xample show s how t o display the conf iguration for a specif ied V ...

  • Cisco Systems 78-15328-01 - page 1019

    2-975 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show securit y acl --------------------------------------------------- arp permit 1. redirect b_1 ip host 43.0.0.1 host 44.0.0.1 2. redirect b_2 ip host 43.0.0.2 host 44.0.0.2 3. redirect b_3 ip host ...

  • Cisco Systems 78-15328-01 - page 1020

    2-976 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show s ecur ity ac l ar p-insp ect ion show security acl a rp-inspection T o di splay A dd ress R esolu tion Pr otoc ol (ARP) inspe ctio n in for mat ion, use the show security acl arp-inspection comman ...

  • Cisco Systems 78-15328-01 - page 1021

    2-977 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show s ec urit y ac l cap t ure- por t s show security acl c apture-ports T o display the c a pture p ort list, use th e show secur ity acl captur e-ports co mmand. sho w securi ty acl ca ptur e-ports ...

  • Cisco Systems 78-15328-01 - page 1022

    2-978 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show s ecur ity acl f eature rate limit show security acl fe ature ratelimit T o display the rate limit for the numbe r of packets tha t are sent to the CPU on a glo bal basis and to display the feat ure ...

  • Cisco Systems 78-15328-01 - page 1023

    2-979 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show security acl log show security acl lo g T o di splay V A C L log i n forma tio n, use the show security acl log comma nd. show security acl log co nfig show security acl log fl ow pr ot ocol { sr ...

  • Cisco Systems 78-15328-01 - page 1024

    2-980 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show s ecur ity ac l l og Defaults Thi s command has no de fa ult set tings. Comma nd T ypes Sw itch co mman d. Command Mode s Pri vile ged. Usage Guid el i nes This c omma nd is sup por ted on sy stem s ...

  • Cisco Systems 78-15328-01 - page 1025

    2-981 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show security acl log reas sembly- timeo ut, redi rect, rout er-advertis ement , router-sol icitati on, sour ce-que nch, source-ro ute-fail ed, time-exce eded, timestam p-reply , timestamp-re quest, t ...

  • Cisco Systems 78-15328-01 - page 1026

    2-982 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show s ecur ity ac l map show security acl map T o display VACL-to-V LAN mapping for a spe cified VACL or VLAN, use the show security acl map comm and. show security acl map acl_name show security acl ma ...

  • Cisco Systems 78-15328-01 - page 1027

    2-983 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show secur ity acl res o urce-usage show security acl resou rce-us age T o disp lay VACL ma nage ment infor matio n, use the sho w securit y acl res ourc e-usage co mmand . show security acl r esource ...

  • Cisco Systems 78-15328-01 - page 1028

    2-984 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show snm p show snmp T o display SNMP informat ion, use the show snmp comma nd. show snmp [ no alias ] Syntax D escr i pti on Defaults Thi s command has no de fa ult set tings. Comma nd T ypes Sw itch co ...

  • Cisco Systems 78-15328-01 - page 1029

    2-985 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show snmp Chassis Alias:my chassis Traps Enabled: None Port Traps Enabled:None Community-Access Community-String ---------------- -------------------- read-only public read-write private read-write-al ...

  • Cisco Systems 78-15328-01 - page 1030

    Chapter 2 Catalyst 6 500 Series Swi tch and ROM M onitor Commands show snmp acce ss 2-986 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 22 show snmp a ccess T o displa y SNMP access inf ormati on, use the show snmp access com mand. show snmp access [ volatile | non vol atile | re a d- o n l y ] show snmp access [ -hex ] g ...

  • Cisco Systems 78-15328-01 - page 1031

    2-987 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show snmp access Ther e are three vers ions of S NMP: • V ersion 1 (SNMPv1)—This is the initial implem entation of SNMP . Refer to RFC 1157 for a full descript ion of func tionalit y . • V ersio ...

  • Cisco Systems 78-15328-01 - page 1032

    2-988 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show s n m p ac cess- list show snmp access-list T o disp lay SNMP a ccess lis t numbe rs and co rresp onding I P addre sses and I P masks , use the show snmp access-list command. Syntax D escr i pti on ...

  • Cisco Systems 78-15328-01 - page 1033

    2-989 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show snmp buffer show snmp buffer T o displa y the num be r of SNMP pa ckets that can be saved in the SNM P UD P soc ket receive buf fe r, use the show snmp buffer command. show snmp b uffer Syntax De ...

  • Cisco Systems 78-15328-01 - page 1034

    2-990 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show snmp community show snmp community T o display SNMP conte xt information, use the show snmp community comman d. show snmp community show snmp community [ read - on l y | volati le | non volatile ] s ...

  • Cisco Systems 78-15328-01 - page 1035

    2-991 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show snmp community This exam ple sh ows the d ispl ay ou t put when yo u e nte r t he show snmp community comman d for the read-o nly , the re ad-w rite , and the re ad-w rite-a ll comm unity st ring ...

  • Cisco Systems 78-15328-01 - page 1036

    2-992 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show snm p co ntext show snmp c ontext T o display SNMP conte xt information, use the show snmp context comman d. show snmp context Syntax D escr i pti on This comm and ha s no a rgume nts o r keywords. ...

  • Cisco Systems 78-15328-01 - page 1037

    2-993 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show s n mp coun ters show snmp c ounters T o display SNMP counter info rmation, use the sho w snmp counters com mand. show s nmp count ers [ v3 | {{ m od/port } { dot1d | dot3 | hcrmon | ifmib | rmo ...

  • Cisco Systems 78-15328-01 - page 1038

    2-994 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show snm p co unters snmpInASNParseErrs = 0 snmpInTooBigs = 0 snmpInNoSuchNames = 0 snmpInBadValues = 0 snmpInReadOnlys = 0 snmpInGenErrs = 0 snmpInTotalReqVars = 61747 snmpInTotalSetVars = 0 snmpInGetRe ...

  • Cisco Systems 78-15328-01 - page 1039

    2-995 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show s n mp coun ters snmpInT o talReqV ars Number o f MIB objects retriev ed successfu lly by th e SNMP prot ocol entit y as the resul t of recei ving v alid S NMP Get-Reque st and Get- Next PDUs. sn ...

  • Cisco Systems 78-15328-01 - page 1040

    2-996 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show snm p co unters snmpInT raps Num ber of SNMP Tr ap PDUs accept ed and proc essed by the SNMP protoc ol entity . snmpOu tT o oBigs Number of SN MP PDU s gene rate d by the SNMP pro toco l entity wi t ...

  • Cisco Systems 78-15328-01 - page 1041

    2-997 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show sn mp engineid show snmp e ngineid T o display the SNMP local engine ID, use the show snmp engineid comman d. show snmp enginei d Syntax Descript ion This c omm and ha s no a rgume nts o r keywor ...

  • Cisco Systems 78-15328-01 - page 1042

    2-998 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show snm p gr oup show snmp group T o di splay the nam e of t he SNMP gro up or col lect ion o f use rs who have a common a ccess p ol icy , use the show snmp g roup command . show snmp gr oup [ volatile ...

  • Cisco Systems 78-15328-01 - page 1043

    2-999 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show snm p gr oup The SNMP func tionality o n the Cata lyst enterp rise LAN switc hes for SNMP v 1 and SNMP v 2c remain s intact; ho we ver , the functionality has greatly e xpanded for SNMPv3. Refer ...

  • Cisco Systems 78-15328-01 - page 1044

    2-1000 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show snm p i falias show snmp ifalias T o display SNMP interfa ce aliases, use the show snmp ifalias comman d. show snmp ifalias [ ifIndex ] show snmp ifalias module mo d show snmp ifalias vlan [ vl an ...

  • Cisco Systems 78-15328-01 - page 1045

    2-1001 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show snmp notify show snmp notify T o display the snmpNoti fyT able conf iguration, use th e sho w snm p noti fy command. show snmp notify [ volatile | nonvolatile | rea d - on l y ] show snmp notify ...

  • Cisco Systems 78-15328-01 - page 1046

    2-1002 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show snm p no tify Ta b l e 2 - 8 0 descr ibes the f ields in t he show snmp notify command out put. Relat e d Commands clear s nmp notify set snmp not ify T able 2-80 sho w snmp notify Command Output F ...

  • Cisco Systems 78-15328-01 - page 1047

    2-1003 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show snmp rm onmemo ry show snmp rmonmemory T o display the memory usag e limit in percenta ge, use the show snmp rmonmemory comma nd. show snmp rmonmemory Syntax Descript ion This c omm and ha s no ...

  • Cisco Systems 78-15328-01 - page 1048

    2-1004 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show snm p t argeta ddr show snmp ta rgetadd r T o display the SNMP tar get address entries in the snmpT argetA ddressT able, use the show snmp targetaddr co mmand . show snmp tar getaddr [ volatile | n ...

  • Cisco Systems 78-15328-01 - page 1049

    2-1005 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show snmp target addr Ta b l e 2 - 8 1 descri bes the f ields in t he show snmp tar getaddr command ou tput . Relat e d Commands clear snmp tar g etaddr set snmp ta rgetaddr T able 2-81 sho w snmp ta ...

  • Cisco Systems 78-15328-01 - page 1050

    2-1006 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show snmp targetparams show snmp ta rgetparams T o disp lay th e SNMP para meters used in the snmp T arge tPa ramsT able when generati ng a mes sage to a tar get, u se the sho w snmp targetparams comman ...

  • Cisco Systems 78-15328-01 - page 1051

    2-1007 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show sn mp target para ms Ta b l e 2 - 8 2 descri bes the f ields in t he show snmp tar getparams comma nd output . Relat e d Commands clear snmp tar g etparams set snmp ta rgetparams T able 2-82 sho ...

  • Cisco Systems 78-15328-01 - page 1052

    2-1008 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show snm p us er show snmp user T o displa y SNMP infor mation fo r a specif ic user , use the show snmp us er comman d. show snmp user [ volatile | nonvolatile | rea d - on l y ] show snmp user [ -hex ...

  • Cisco Systems 78-15328-01 - page 1053

    2-1009 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show s n mp user Ta b l e 2 - 8 3 descri bes the f ields in t he show snmp user comma nd output . Relat e d Commands clear sn mp user set snmp user T able 2-83 sho w snmp user Com mand Output Fields ...

  • Cisco Systems 78-15328-01 - page 1054

    2-1010 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show sn mp vie w show snmp view T o disp lay th e SNMP MIB vi e w conf igurati on, use the show snmp vie w comm and. show snmp view [ volatile | non volat ile | read- only ] show snmp view [ -hex ] { vi ...

  • Cisco Systems 78-15328-01 - page 1055

    2-1011 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s sh ow snmp view Ta b l e 2 - 8 4 descri bes the f ields in t he show snmp view comma nd output. Relat e d Commands clear sn mp view set snmp view T able 2-84 sho w snmp vie w Command Output Fields Fi ...

  • Cisco Systems 78-15328-01 - page 1056

    2-1012 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show span show span T o display informat ion about the curren t SP AN conf iguration, use the show span comm and. show span [ all ] Syntax D escr i pti on Defaults Thi s command has no de fa ult set tin ...

  • Cisco Systems 78-15328-01 - page 1057

    2-1013 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show span Relat e d Commands clear co nfi g set spantree root Multicast Status of whether monitoring m ulticast t raf f ic is enable d or disab led. Filter Monitored V L ANs in so urce trun k ports. ...

  • Cisco Systems 78-15328-01 - page 1058

    2-1014 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show spant ree show spantree T o displ ay span ning tree i nform ation fo r a VLAN or po rt, use t he show spantree comm and. show spantr ee [ vlan ] [ active ] show spantr ee mod / port Syntax D escr i ...

  • Cisco Systems 78-15328-01 - page 1059

    2-1015 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show spantr ee Exam ples This example (while in PVST+ mode) sho w s ho w to display the acti v e s panning tree port conf iguration for VL AN 1: Console> (enable) show spantree 1 active VLAN 1 Spa ...

  • Cisco Systems 78-15328-01 - page 1060

    2-1016 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show spant ree Port State Role Cost Prio Type ------------------------ ------------- ---- -------- ---- -------------------- 3/3 forwarding DESG 19 32 P2P, PEER(STP) 5/1 forwarding DESG 4 32 P2P, Edge 6 ...

  • Cisco Systems 78-15328-01 - page 1061

    2-1017 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show spantr ee Relat e d Commands show spantr ee backbonefast show spantr ee blockedports show spantr ee port vlancost show spantr ee statistics show spantr ee summary show spantr ee uplinkfast Forwa ...

  • Cisco Systems 78-15328-01 - page 1062

    2-1018 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show spant ree bac kbonefas t show spantree ba ckbonefa st T o disp lay whether the sp anning tree Back boneF ast Con ver gence f eature is ena bled, use th e show spantree backbonefast com mand. show s ...

  • Cisco Systems 78-15328-01 - page 1063

    2-1019 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show sp ant r ee bloc k ed por t s show spantree bl ockedports T o di splay o nly the bloc ked por t s o n a p er-VLAN or per-insta nce basi s, use th e show spantree blockedports co mmand . show spa ...

  • Cisco Systems 78-15328-01 - page 1064

    2-1020 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show spant ree blo cke dports Relat e d Commands show spantr ee ...

  • Cisco Systems 78-15328-01 - page 1065

    2-1021 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show spantree bpdu-filter show spantree bpdu-filter T o display information ab out BPDU filtering , use the show spantree bpdu-f ilter command. show spantr ee bpdu-filt er [ mod [ / port ]] Syntax De ...

  • Cisco Systems 78-15328-01 - page 1066

    2-1022 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show spant ree bpd u-guard show spantree bp du-guard T o display informat ion about BPDU guard, use the show spantr ee bpdu-guard comman d. show spantr ee bpdu-guard [ mo d [ / port ]] Syntax D escr i p ...

  • Cisco Systems 78-15328-01 - page 1067

    2-1023 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show spantr ee bpdu-ske wing show spantree bp du-skewing T o display BPDU ske wing detection status, use the show spantree bpdu-skewing comm an d. show spantr ee bpdu- skewing vlan [ m od/port ] show ...

  • Cisco Systems 78-15328-01 - page 1068

    2-1024 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show spant ree bpd u-skewi ng . . 8/24 4111 113922 Tue Nov 21 2000, 06:26:05 8/26 113926 113926 Tue Nov 21 2000, 06:26:05 8/28 4111 113931 Tue Nov 21 2000, 06:26:05 Console> (enable) This exam ple sh ...

  • Cisco Systems 78-15328-01 - page 1069

    2-1025 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show spantree conflicts show spantree conflicts T o d i sp l a y the MAC address of the root switch in the instance, the time remainin g bef ore the VLAN joins the instance, an d the number o f secon ...

  • Cisco Systems 78-15328-01 - page 1070

    2-1026 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show spant ree con flicts This e xample shows th e output if there are conflicts on the specif ied VLAN: Console> (enable) show spantree conflicts 1 Inst MAC Delay Time left ---- ----------------- -- ...

  • Cisco Systems 78-15328-01 - page 1071

    2-1027 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show sp a ntree defaultcostmode show spantree de faultcostmode T o displa y the curr ent def ault port c os t mode, use th e sh ow span tree de fault costmode co mmand. show spantree default costmo d ...

  • Cisco Systems 78-15328-01 - page 1072

    2-1028 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show spant ree gua rd show spantree gu ard T o display spanning t ree guard inf ormatio n for the VLANs or i nstances on a po rt, use the show s pantr ee guard com mand . show spantr ee guar d [ vlan ] ...

  • Cisco Systems 78-15328-01 - page 1073

    2-1029 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show spantr ee guard Exam ples Th is exampl e sh ows how to displ ay sp an ning tre e gu ar d in for ma tion f or a sp ec ific VL AN: Console> show spantree guard 1004 Port Vlan Port-State Guard t ...

  • Cisco Systems 78-15328-01 - page 1074

    2-1030 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show spant ree mapp ing show spantree mappi ng T o display VLAN and instan ce mapping informa tion, use the show spantree mapping . show spantr ee mapping [ co nfig ] Syntax D escr i pti on Defaults Thi ...

  • Cisco Systems 78-15328-01 - page 1075

    2-1031 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s sh ow spantree mapping This e xample shows h ow to display ma ppings conf igured on the local switch: Console> (enable) show spantree mapping config Inst Root Mac Vlans ---- ----------------- ---- ...

  • Cisco Systems 78-15328-01 - page 1076

    2-1032 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show s pant ree mis tp -instanc e show spantree mistp-instan ce T o display instance info rmation, use the show spantree mistp-instance comma nd. show spantr ee mistp-instance [ instanc e ] [ active ] s ...

  • Cisco Systems 78-15328-01 - page 1077

    2-1033 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show spantree mistp-instance Ta b l e 2 - 8 9 descri bes the f ields in t he show spantree mistp-instance command out put: Relat e d Commands set spant ree po rtinstance cost set spant ree po rtinsta ...

  • Cisco Systems 78-15328-01 - page 1078

    2-1034 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show spant ree mst show spantree mst T o display MST informa tion, use the show spantree mst comm and. show spantr ee mst [ instance | m od/port ] show spantree mst active Syntax D escr i pti on Default ...

  • Cisco Systems 78-15328-01 - page 1079

    2-1035 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s sh ow s pan tr ee m st This e xample shows h ow to display MST in stance-specif ic information for instance 1: Console> (enable) show spantree mst 1 Spanning tree mode MST Instance 1 VLANs Mapped: ...

  • Cisco Systems 78-15328-01 - page 1080

    2-1036 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show spant ree mst con fig show spantree mst conf ig T o display the MST re gion informat ion present in NVRAM and to display cha nges that hav e not been appli ed to the MS T region configurat ion yet ...

  • Cisco Systems 78-15328-01 - page 1081

    2-1037 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show spantree mst config 7 301-400 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - ================================================ Edit buffer is locked by: Console Console> (enable) Relat e d Commands cle ...

  • Cisco Systems 78-15328-01 - page 1082

    2-1038 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show spant ree port fa st show spantree po rtfast T o di splay Port Fast infor ma tion, use th e show spantree portfast comman d. show spantr ee portfast [ mod/po rt ] Syntax D escr i pti on Defaults Th ...

  • Cisco Systems 78-15328-01 - page 1083

    2-1039 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s sh ow spantree porti nstancecost show spantree po rtinstanc ecost T o sho w the path cost fo r the inst ances on a port , use the show spantree portinstancecost co mman d. show spantr ee portinstance ...

  • Cisco Systems 78-15328-01 - page 1084

    2-1040 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show spant ree port v lancost show spantree po rtvlanco st T o sho w the path cost for the VLANs or e xtended-r ange VLANs, use the show spantree portvlanc ost comm and. show spantr ee port vlancost mod ...

  • Cisco Systems 78-15328-01 - page 1085

    2-1041 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show spantree statistics show spantree sta tistics T o sho w spanning tree statistica l information, us e the show spantree statistics comman d. show spantr ee statistics m od/port [ vlan ] show span ...

  • Cisco Systems 78-15328-01 - page 1086

    2-1042 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show s pant ree stat istics PORT based information & statistics config bpdu's xmitted (port/VLAN) 0(0) config bpdu's received (port/VLAN) 0(0) tcn bpdu's xmitted (port/VLAN) 0(0) tcn ...

  • Cisco Systems 78-15328-01 - page 1087

    2-1043 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show spantree statistics This e x ample sho ws how to display inst ance-speci fic infor mation: Console> (enable) show spantree statistics 2 mistp-instance 2 Port 2/1 Instance 2 SpanningTree enabl ...

  • Cisco Systems 78-15328-01 - page 1088

    2-1044 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show s pant ree stat istics num of similar bpdus to process 0 received_inferior_bpdu FALSE next state 3 src mac count: 0 total src mac count 0 curr_src_mac 00-00-00-00-00-00 next_src_mac 00-00-00-00-00- ...

  • Cisco Systems 78-15328-01 - page 1089

    2-1045 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show spantree statistics bridge forward delay 15(15) sec topology change initiator: 1/0 last topology change occured: Fri Sep 7 2001, 09:52:22 topology change FALSE topology change time 35 topology c ...

  • Cisco Systems 78-15328-01 - page 1090

    2-1046 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show s pant ree stat istics port _inc onsis tenc y Status of whether the port is i n an inconsist ent (PVI D or p ort type ) stat e or no t. PORT -based i nf orma tion and st atistic s conf ig bpdu&apos ...

  • Cisco Systems 78-15328-01 - page 1091

    2-1047 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show spantree statistics Relat e d Commands clear s pantr ee statistics show spantr ee bridg e forward dela y V a lue of t he Forward Del ay para mete r when t he bri dge is th e root or is attemp ti ...

  • Cisco Systems 78-15328-01 - page 1092

    2-1048 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show s pant ree sum m ary show spantree su mmary T o d isplay a summ ar y of spanni ng t r ee i nfor ma tio n, use th e show spantree summary comman d. show spantr ee summary [ novlan ] show spantr ee s ...

  • Cisco Systems 78-15328-01 - page 1093

    2-1049 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show sp a ntree summa r y This exam ple shows how to displ ay n on- VLA N-spec ific inf orma tio n onl y: Console> show spantree summary novlan Spanning tree mode: RAPID-PVST+ MAC address reductio ...

  • Cisco Systems 78-15328-01 - page 1094

    2-1050 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show s pant ree sum m ary This exam ple sh ows how to displa y a s ummar y of spanni n g tr ee M ST inst anc e info rm ation : Console> show spantree summary mst MAC address reduction:disabled Root s ...

  • Cisco Systems 78-15328-01 - page 1095

    2-1051 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show spantree up linkfast show spantree up linkfast T o sho w the UplinkF ast feature settings, use the show spantr ee uplinkfast comman d. show spantr ee uplinkfast [{ mistp-instance [ in stances ]} ...

  • Cisco Systems 78-15328-01 - page 1096

    2-1052 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show spant ree upl in kfast This e xample sho ws how to display the UplinkFa st feature settings for a specif ic instance: Console> show spantree uplinkfast mistp-instance 1 Station update rate set t ...

  • Cisco Systems 78-15328-01 - page 1097

    2-1053 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show start up-config show startu p-config T o display the startup conf iguration f ile contained in NVRAM or specified b y the CONFIG_FILE en vironmen t variab le, use the show startup-conf ig comman ...

  • Cisco Systems 78-15328-01 - page 1098

    2-1054 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show star tup-co nfi g #vtp set vtp domain dan set vtp mode transparent set vlan 1 name default type ethernet mtu 1500 said 100001 state active set vlan 1002 name fddi-default type fddi mtu 1500 said 10 ...

  • Cisco Systems 78-15328-01 - page 1099

    2-1055 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show start up-config #module 8 empty ! #module 9 empty ! #module 15 empty ! #module 16 empty end Console> (enable) Relat e d Commands show running-conf ig ...

  • Cisco Systems 78-15328-01 - page 1100

    2-1056 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show summertime show summertime T o disp lay th e curr ent st atus of the sum mertime feature, u se the show summertime comman d. show summertime Syntax D escr i pti on This comm and ha s no a rgume nts ...

  • Cisco Systems 78-15328-01 - page 1101

    2-1057 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show system show system T o display system information, use the sho w system command. show system Syntax Descript ion This c omm and ha s no keywords or argume nts. Defaults Thi s command has no de f ...

  • Cisco Systems 78-15328-01 - page 1102

    2-1058 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show sy stem Core Dump Core File ------------------------ ----------------------- enabled bootflash:crashinfo Syslog Dump Syslog File ------------------------ ----------------------- enabled bootflash:s ...

  • Cisco Systems 78-15328-01 - page 1103

    2-1059 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show system Syslog Dump Syslog File ------------------------ ----------------------- enabled bootflash:sysloginfo Console> Ta b l e 2 - 9 1 descri bes the f ields in t he show system comman d o ut ...

  • Cisco Systems 78-15328-01 - page 1104

    2-1060 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show sy stem Relat e d Commands set system ba ud set system cont act set system c ore-dump set system c ore-file set system c ountryco de set system loca tion set system mo dem set system na me set syst ...

  • Cisco Systems 78-15328-01 - page 1105

    2-1061 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show system highava ilability show system hi ghava ilability T o display the system high-a v ailability con figurat io n settings, use the show system higha vailability comm an d. show system higha v ...

  • Cisco Systems 78-15328-01 - page 1106

    2-1062 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show sys te m superv is or- update show system supervisor-update T o di splay the Era sa ble Progr am mabl e L ogic Device ( EPLD ) upg ra de pr oc ess c onfigurati on , use the show system supe rvisor ...

  • Cisco Systems 78-15328-01 - page 1107

    2-1063 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show system switchmode show system switchmode T o display the system switching mode setting, use the show system switchmode comma nd. show system switchmode Syntax Descript ion This c omm and ha s no ...

  • Cisco Systems 78-15328-01 - page 1108

    2-1064 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show tacac s show tacacs T o di splay the T ACA CS+ pr otoc ol c on figuration, use th e show ta cacs comm and. sho w taca cs [ noalias ] Syntax D escr i pti on Defaults Thi s command has no de fa ult s ...

  • Cisco Systems 78-15328-01 - page 1109

    2-1065 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show tacacs Relat e d Commands set tac acs a ttemp ts set taca cs direct edre quest set ta cacs k ey set taca cs server set ta cacs ti meou t T acacs t imeout T ime in s econd s to wait for a r espon ...

  • Cisco Systems 78-15328-01 - page 1110

    2-1066 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show te ch- suppor t show tech-supp ort T o di splay syst em and configur ation i nform ati on you ca n provide t o the Ci sco T echnic al Ass istanc e Center when repo rting a pr oblem, use th e show t ...

  • Cisco Systems 78-15328-01 - page 1111

    2-1067 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show tech-su pport If you spe cify the config ke y word , the show tech-support command disp lays the o utput of t hes e comm ands: • show conf ig • show flash • show log • sho w micr ocode ? ...

  • Cisco Systems 78-15328-01 - page 1112

    2-1068 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show te ch- suppor t • show system • show spantr ee active • sh ow ve rs i on If you spe cify a m odul e, po rt, or VL AN numbe r, the system di spla ys ge ne ral syst em info rm ati on a nd infor ...

  • Cisco Systems 78-15328-01 - page 1113

    Chapter 2 Catalyst 6 500 Series Swi tch and ROM M onitor Commands show test 2-1069 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 222 show test T o display the errors r eported f rom the diagnostic tests, the diagnostic le vel, a nd the a ction tha t the supervisor e ngine takes after a diagnostics test failure , use the s ...

  • Cisco Systems 78-15328-01 - page 1114

    2-1070 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show te st DontLearnTest: . ConditionalLearnTest: . BadBpduTest: . TrapTest: . Loopback Status [Reported by Module 2] : Ports 1 2 ----------- . . Channel Status : Ports 1 2 ----------- . . This exam ple ...

  • Cisco Systems 78-15328-01 - page 1115

    2-1071 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show test This e xample shows the di splay if you do not specify a module: Console> show test Environmental Status (. = Pass, F = Fail, U = Unknown, N = Not Present) PS1:. PS2:N PS1 Fan:. PS2 Fan: ...

  • Cisco Systems 78-15328-01 - page 1116

    2-1072 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show te st Ta b l e 2 - 9 3 descri bes th e po ssible fields in the show test c om mand ou tput . The fields shown depend on the m odule ty pe qu er ied. T able 2-93 sho w tes t Command Output Fie lds F ...

  • Cisco Systems 78-15328-01 - page 1117

    2-1073 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show test Relat e d Commands set tes t di agfa il- ac tion set test dia glevel DPRAM T est results for the dual-po rt RAM. SAMB A T est results for the SAMB A chip. Saints T est results for the SAINT ...

  • Cisco Systems 78-15328-01 - page 1118

    2-1074 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show time show time T o display the curren t time of day in the system clo ck, use the show time command. show time Syntax D escr i pti on This comm and has n o keywords or a rgument s. Defaults Thi s c ...

  • Cisco Systems 78-15328-01 - page 1119

    2-1075 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s sho w t imezo ne show timezone T o disp lay th e curr ent time zone and o ff set, us e the show ti mezone comman d. show timezone Syntax Descript ion This c omm and ha s no a rgume nts o r keywords. ...

  • Cisco Systems 78-15328-01 - page 1120

    2-1076 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show top show top T o start the T opN proces s, use the show top comman d. show top [ N ] [ metric ] [ inte rval inter va l ] [ port_typ e ] [ background ] Syntax D escr i pti on Defaults The de faults ...

  • Cisco Systems 78-15328-01 - page 1121

    2-1077 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show top Usage Guid el i nes Y ou can ter minat e T opN pro cesses wit h the background option spec ified only by using the clea r top [ r e port_ num ] command . T opN repor ts wi th t he background ...

  • Cisco Systems 78-15328-01 - page 1122

    2-1078 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show top rep ort show top re port T o list all T opN processes and specif ic T opN reports, use the show top r eport comm and. show to p report [ r eport_num ] Syntax D escr i pti on Defaults Thi s comm ...

  • Cisco Systems 78-15328-01 - page 1123

    2-1079 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show top r eport This exampl e shows ho w to displa y the avai lable To pN rep ort 2 (shown in the firs t example ) for the switch: Console> show top report 2 Start Time: 03/09/2000,11:34:00 End T ...

  • Cisco Systems 78-15328-01 - page 1124

    2-1080 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show traff i c show traffic T o displa y traf fic and peak inform ation, use the show traffic command . show traffic Syntax D escr i pti on This comm and has n o keywords or a rgument s. Defaults Thi s ...

  • Cisco Systems 78-15328-01 - page 1125

    2-1081 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s sho w tr unk show trunk T o display trunking inform ation for the switch, use the sho w trunk co mman d. show trunk [ mo d [ /port ]] [ detai l ] [ extended-range ] Syntax Descript ion Defaults Thi s ...

  • Cisco Systems 78-15328-01 - page 1126

    2-1082 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show trunk Exam ples Th is example sh ows how to displa y tr unkin g in for mat ion for the sw it ch: Console> show trunk * - indicates vtp domain mismatch # - indicates dot1q-all-tagged enabled on t ...

  • Cisco Systems 78-15328-01 - page 1127

    2-1083 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s sho w tr unk Port Vlans allowed and active in management domain -------- --------------------------------------------------------------------- 3/1 2 Port Vlans in spanning tree forwarding state and n ...

  • Cisco Systems 78-15328-01 - page 1128

    2-1084 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show ud ld show udld T o display UDLD informatio n, use the show udld co mmand. show udl d show udl d port [ mod [ /port ]] Syntax D escr i pti on Defaults Thi s command has no de fa ult set tings. Comm ...

  • Cisco Systems 78-15328-01 - page 1129

    2-1085 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s s h ow udld Ta b l e 2 - 9 5 descri bes the f ields in t he show udld comman d outpu t. Relat e d Commands set udld set udld agg ressive-mode set udld interval T able 2-95 sho w udld Comma nd Output ...

  • Cisco Systems 78-15328-01 - page 1130

    2-1086 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show users show us ers T o show if the console por t is acti ve and to list all acti ve T elnet sessions with th e IP address or IP alias of the originatin g host, use the show use rs comma nd. show use ...

  • Cisco Systems 78-15328-01 - page 1131

    Chapter 2 Catalyst 6 500 Series Swi tch and ROM M onitor Commands show ve rsion 2-1087 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 22 show version T o display so ftware, h ardwar e, and web in terfa ce versio n informa tion, use the show ve r s i o n co mm and . sh ow ve rs i on [ mod ] sh ow ve rs i on ep ld [ mod ] Sy ...

  • Cisco Systems 78-15328-01 - page 1132

    2-1088 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show vers ion DRAM FLASH NVRAM Module Total Used Free Total Used Free Total Used Free ------ ------- ------- ------- ------- ------- ------- ----- ----- ----- 1 65408K 45402K 20006K 16384K 8683K 7701K 5 ...

  • Cisco Systems 78-15328-01 - page 1133

    2-1089 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show version Ta b l e 2 - 9 6 descri bes the f ields in t he sh ow ve r s io n comma nd output . Relat e d Commands download T able 2-96 sho w ve r sion Comm and Output Fi elds Field Description NmpS ...

  • Cisco Systems 78-15328-01 - page 1134

    2-1090 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show vlan show vlan T o display VLAN inform ation, use the show vlan comm and. show vlan [ trunk ] show vlan vlans [ notrunk ] show vlan mapping show vlan type show vlan summary show vlan f i rewall-vla ...

  • Cisco Systems 78-15328-01 - page 1135

    2-1091 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show v lan 10 VLAN0010 active 18 6/1,6/3 11 VLAN0011 active 19 6/2 20 VLAN0020 active 20 21 VLAN0021 active 21 30 VLAN0030 active 22 31 VLAN0031 active 23 1002 fddi-default active 6 1003 token-ring-d ...

  • Cisco Systems 78-15328-01 - page 1136

    2-1092 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show vlan This exam ple sh ows how to displa y inf or matio n f or a sp eci fic VLA N an d type : Console> show vlan 2 fddi VLAN Name Status IfIndex Mod/Ports, Vlans ---- ---------------------------- ...

  • Cisco Systems 78-15328-01 - page 1137

    2-1093 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show v lan This exam ple shows how to di spla y a s umm ar y of ac tive, suspended, a nd exten de d VL ANs: Console> show vlan summary Vlan status Count Vlans ------------- ----------------------- ...

  • Cisco Systems 78-15328-01 - page 1138

    2-1094 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show vlan Relat e d Commands set trunk set vlan show trunk Second ary-T ype T y pe of second ary VLAN port. Possible values ar e isol ated, community , or -. Ports Number of the m odu le an d por ts a s ...

  • Cisco Systems 78-15328-01 - page 1139

    2-1095 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show vlan count ers show vlan cou nters T o displa y counte rs for al l VLANs or a range of VLANs, use the s how vlan count ers comman d. show vlan counters [ vl ans ] Syntax Descript ion Defaults Th ...

  • Cisco Systems 78-15328-01 - page 1140

    2-1096 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show vlan counte rs Relat e d Commands clear vl an counters L3-O ut-N onUn ica st-Pkts La yer 3 non unic as t packets for warde d pe r outpu t VLA N. L2-Unic ast-Octe ts Layer 2 unicast oc tets per VLAN ...

  • Cisco Systems 78-15328-01 - page 1141

    2-1097 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show vmps show vmps T o di splay V MPS c onfigura tion i nfor mat ion, use the show vmps command . show vmps [ noalias ] Syntax Descript ion Defaults Thi s command has no de fa ult set tings. Comma n ...

  • Cisco Systems 78-15328-01 - page 1142

    2-1098 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show vm ps Relat e d Commands download set vmps server set vmps st ate State Sta tus on whether VMPS is enabled or disabl ed. Operatio nal Status VMPS stat us (acti ve, inact i ve, or dow nloading). TFT ...

  • Cisco Systems 78-15328-01 - page 1143

    2-1099 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show v mp s mac show vmps mac T o disp lay the MA C-addr ess-to-VL AN mappin g tabl e, use the show vmps mac command. show vmps mac [ ma c_addr ] Syntax Descript ion Defaults Thi s command has no de ...

  • Cisco Systems 78-15328-01 - page 1144

    2-1100 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show vm ps statistic s show vmps statistics T o display the VMPS statistics, u se the show vmps statistics command. show vmps statistics Syntax D escr i pti on This comm and has n o keywords or a rgumen ...

  • Cisco Systems 78-15328-01 - page 1145

    2-1101 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show vmps statis tics Relat e d Commands clear vmps s tatistics ...

  • Cisco Systems 78-15328-01 - page 1146

    2-1102 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show vm ps vlan show vmps vlan T o displa y all the MA C addresses assigned to a VLA N in the VMPS table, us e the sho w vmps vlan comm and. show vmps vlan vlan_nam e Syntax D escr i pti on Defaults Thi ...

  • Cisco Systems 78-15328-01 - page 1147

    2-1103 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show vtp domain show vtp domain T o display VTP domain informati o n, use the show vtp domain comman d. show vtp domain Syntax Descript ion This c omm and ha s no keywords or argume nts. Defaults Thi ...

  • Cisco Systems 78-15328-01 - page 1148

    2-1104 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show vtp do main Relat e d Commands set vtp show vtp statistics Vlan-c ou nt T ota l nu mbe r of V LANs i n the dom ai n. Max- vlan -stor ag e Maximum n umb er of V L ANs allowed on t he device. Config ...

  • Cisco Systems 78-15328-01 - page 1149

    2-1105 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show vtp stati stics show vtp statisti cs T o display VTP statistics, use th e s how vtp st atist ics command. show vtp statistics Syntax Descript ion This c omm and ha s no keywords or argume nts. D ...

  • Cisco Systems 78-15328-01 - page 1150

    2-1106 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show vtp s ta tistics Relat e d Commands clear vt p statistic s set vtp No of con fig revision errors Nu mber of conf ig re vision errors . No of con fig digest errors N umber of conf ig re vision diges ...

  • Cisco Systems 78-15328-01 - page 1151

    2-1107 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s slip slip T o attach or detach Se rial Line Internet Protocol (SLI P) for the co nsole port , use the slip command. slip { attach | detach } Syntax Descript ion Defaults The de fault is SLIP is not a ...

  • Cisco Systems 78-15328-01 - page 1152

    2-1108 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands squeeze squeeze T o d el et e Fl ash fil es pe rm an en tly , use th e squeeze command. squeeze [ m/ ] de vice : Syntax D escr i pti on Defaults Thi s command has no de fa ult set tings. Comma nd T ypes ...

  • Cisco Systems 78-15328-01 - page 1153

    Chapter 2 Catalyst 6 500 Series Swi tch and ROM M onitor Commands stack 2-1109 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 22 stack T o dump a st ack trace of fram es, use the stack co mmand . stack [ -d | - m ] [ num ] Syntax Descript ion Defaults The d ef ault for num is f ive frames. Comma nd T ypes RO M mon itor co ...

  • Cisco Systems 78-15328-01 - page 1154

    2-1110 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands switch switch T o swi t ch the c lock f rom the super vi sor cl oc k to th e inte rn al c l ock or fr om th e a ctive supervisor engi ne to the stan dby supervis or engine , use the switch comm and. swi ...

  • Cisco Systems 78-15328-01 - page 1155

    2-1111 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s switch console switch console T o swi tch the c onsol e con nection physic ally to t he MSFC on the active supervisor engine , use t he switch consol e command. switch conso le [ mN o ] Syntax Descri ...

  • Cisco Systems 78-15328-01 - page 1156

    2-1112 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands switch fa bri c switch fabric T o reset th e acti ve Switch F abric Module and allo w the standb y Switch Fa b ric Module to take ov e r, use the switch fabric command . switch fabric [ mN o ] Syntax D ...

  • Cisco Systems 78-15328-01 - page 1157

    2-1113 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s sync sync T o write th e workin g in-cor e copy o f en vironment v ariables and th e aliases o ut to NVRAM so the y are read on the ne x t reset, use the sync comman d. sync Syntax Descript ion This ...

  • Cisco Systems 78-15328-01 - page 1158

    2-1114 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands sysre t sysret T o display the return informatio n from the last booted system image, use the sysret com mand. sysret Syntax D escr i pti on This comm and ha s no a rgume nts o r keywords. Defaults Thi ...

  • Cisco Systems 78-15328-01 - page 1159

    2-1115 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s tel net telnet T o star t a T elnet connec tion to a remot e host , use the telnet command. teln et ho st [ port ] Syntax Descript ion Defaults Thi s command has no de fa ult set tings. Comma nd T yp ...

  • Cisco Systems 78-15328-01 - page 1160

    2-1116 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands test cab le-diagn osti cs test cable-d iagnostics T o test the conditi on of 10-Gi gabit Ethe rnet lin ks or coppe r cable s on 48-por t 10/100/10 00 BASE-T modules, use the test cable-diagnostics comma ...

  • Cisco Systems 78-15328-01 - page 1161

    2-1117 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s test cable-diagnostics Exam ples Th is example sh ows how to start t he PRBS test on po rt 1 on modu le 5 : Console> (enable) test cable-diagnostics prbs start 5/1 PRBS cable-diagnostic test start ...

  • Cisco Systems 78-15328-01 - page 1162

    2-1118 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands test sn mp tr ap test snmp trap T o send an SNMP trap message to the trap recei vers, use the test snmp trap co mman d. test snmp trap trap_num [ specif ic_nu m ] Syntax D escr i pti on Defaults Thi s c ...

  • Cisco Systems 78-15328-01 - page 1163

    2-1119 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s t rac erout e traceroute T o di splay a h op- by-hop pa th th rough an I P net work f rom th e Catal yst 6500 se ries swit ch t o a spe ci fic destinati on ho st, use the tracer oute co mmand. tracer ...

  • Cisco Systems 78-15328-01 - page 1164

    2-1120 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands tracerou te Usage Guid el i nes T o i n te rr up t tr aceroute after the co mmand h as be en issu ed, p ress Ct rl-C . The trac eroute com mand uses the TTL field in the IP head er to cause routers and ...

  • Cisco Systems 78-15328-01 - page 1165

    2-1121 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s t rac erout e Ta b l e 2 - 1 0 5 describes the fiel ds in the trac er oute comm an d o ut pu t. If tracer oute re cei v e s an I CMP e rro r mes sage ot her t ha n a ti me-e xceeded o r p ort- unr ea ...

  • Cisco Systems 78-15328-01 - page 1166

    2-1122 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands unalias unalias T o remov e the alias name and as sociated value from the alias list, us e the unalias comman d. unalias name Syntax D escr i pti on Defaults Thi s command has no de fa ult set tings. Co ...

  • Cisco Systems 78-15328-01 - page 1167

    2-1123 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s undel ete undelete T o recover a delete d file on a Flash memo ry device, use the undelete comman d. Th e del eted file can be recovered usin g its index (because there co uld be multiple deleted f i ...

  • Cisco Systems 78-15328-01 - page 1168

    2-1124 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands unse t=varnam e unset=v arname T o remov e a variab le name from the v ariable list, use the unset= varname command. unset= varn ame Syntax D escr i pti on Defaults Thi s command has no de fa ult set ti ...

  • Cisco Systems 78-15328-01 - page 1169

    2-1125 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s varname= varname= T o set the v ariable VA R N A M E to varv alue , use the varnam e= command. No te that th e syntax va rnam e = sets the variab le to a NUL L string. varname = value Syntax Descript ...

  • Cisco Systems 78-15328-01 - page 1170

    2-1126 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands verif y verify T o co nf irm the checksum o f a f ile on a Fla sh de vice, use the verify command . veri fy [[ m/ ] devic e : ] f ilename Syntax D escr i pti on Defaults Thi s command has no de fa ult s ...

  • Cisco Systems 78-15328-01 - page 1171

    2-1127 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s wait wait T o cau se the C LI to pause for a sp ecif ied nu mber of se conds b efore execu ting t he next command, use the wait comman d. Thi s c om mand mig ht be in clud ed in a c onfigura tion fil ...

  • Cisco Systems 78-15328-01 - page 1172

    2-1128 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands whichb oot whichboot T o determine wh ich file booted, use the whichboot command . whichboot Syntax D escr i pti on This comm and ha s no a rgume nts o r keywords. Defaults Thi s command has no de fa ul ...

  • Cisco Systems 78-15328-01 - page 1173

    2-1129 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s write write T o uplo ad the cu rren t configuratio n to the ne twork or di splay the configur ation inf orma tion cu rrently i n running m em ory , u se t he write comm and. write ne twork [ all ] wr ...

  • Cisco Systems 78-15328-01 - page 1174

    2-1130 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands write Exam ples Th is example sh ows how to upload the syste m5 .cfg file to t he m erc ury ho st: Console> (enable) write network IP address or name of host? mercury Name of configuration file to wr ...

  • Cisco Systems 78-15328-01 - page 1175

    2-1131 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s write This exam ple sh ows how to uploa d t he ru nni ng syst em configu ratio n to a pre spe cified loc ation : Console> (enable) write memory Upload configuration to bootflash:switch.cfg 7165844 ...

  • Cisco Systems 78-15328-01 - page 1176

    2-1132 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands write tech -suppo rt write tech-sup port T o gen er ate a repor t t hat cont ai ns s tatus in forma ti on about your s wi tch o r uploa d the ou tput o f the comm an d to a T FTP s erver, wher e yo u ca ...

  • Cisco Systems 78-15328-01 - page 1177

    2-1133 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s write tech-support Note I f y o u a re u pl o a d i ng t h e i n f or m a t io n to a f il e , make sur e the file already exists in the TFTP server , t he f ile has approp riate perm issions , and t ...

  • Cisco Systems 78-15328-01 - page 1178

    2-1134 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands write tech -suppo rt • show pr oc mem • show pr oc cpu • show system • show spantr ee active • sh ow ve rs i on If you spe cify a m odul e, po rt, or VL AN numbe r, the system di spla ys ge ne ...

  • Cisco Systems 78-15328-01 - page 1179

    A- 1 Catalyst 6500 Series Switch Command Reference—Release 7.6 78-15328-01 APPEND IX A Acronyms T able A-1 d ef ines the ac ronyms used in this p ublication . Ta b l e A - 1 L i s t o f A c r o n y m s Acro nym E xpan sion AAA authent ication, authorizat ion, ac counting AAL A TM adaptatio n layer A CE access control entry A CL access control lis ...

  • Cisco Systems 78-15328-01 - page 1180

    A- 2 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15474-01 Appendix A Acronyms CPLD Comple x Pr ogra mma ble L ogic De vice CRC cyclic redunda ncy check CRF concentrato r relay function DCC Data Co untr y Cod e DEC Digital Equipment Corporat io n DFI Domain-Specif ic Part Fo rmat Identif ier DHCP D y namic Host C onfigura tion ...

  • Cisco Systems 78-15328-01 - page 1181

    A-3 Catalyst 6500 Series Switch Command Reference—Release 7.6 78-15474-01 Appendix A Acronyms IETF Internet Engine ering T ask For ce IDP initial domain part IDSM I ntrusion D etection System M odule IGMP Inte rnet Group M anagem ent Protoco l ILMI Int egrated Local Ma nageme nt Inte rface IP Internet Pr otoc ol IPC interproc essor commu nicati o ...

  • Cisco Systems 78-15328-01 - page 1182

    A- 4 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15474-01 Appendix A Acronyms MTP Media T ermination Point MTU maximum tra nsmission unit MV AP multiple VLAN access port N AM Network Ana lysi s Modul e NDE NetFlow Data Ex port NMP N etwork Ma na geme nt Pr ocesso r NSAP network service access point NTP Ne twork Time Protocol ...

  • Cisco Systems 78-15328-01 - page 1183

    A-5 Catalyst 6500 Series Switch Command Reference—Release 7.6 78-15474-01 Appendix A Acronyms rcp Re mote Copy Prot ocol RGMP Router-Ports Gro up Manageme nt Protocol RIF Routing In fo rma tion F ield RMON Remote Monitoring R O M read-on ly mem ory R S A Rive st, Shamir , and Adlem an (a public- key cryptographic system) RSP AN remote SP AN RST r ...

  • Cisco Systems 78-15328-01 - page 1184

    A- 6 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15474-01 Appendix A Acronyms U AR T Un i versal Asynch ronous Recei ver/T ransmitter UDLD UniDirectional Link Detection UDLP UniDi rectio nal Link Protocol UDP User Datagr am Protoc ol UNI User-Network In terfa ce UTC Coordinat ed U niversal T ime V A C L VLAN acces s control l ...

  • Cisco Systems 78-15328-01 - page 1185

    IN-1 Catalyst 6500 Series Switch Command Reference—Release 7.6 78-15328-01 INDEX Symbols ? (help) comm an d c om ple ti o n 1-11 displaying ma tc hes 1-11 switch CLI 1-9 Numerics 3DES keys defining 2-313 removi ng 2-39 802.1 q displayi ng st atu s o f th e all -ta gged fea ture o n a port 2-877 setting the all-ta g ged feature on a port 2-386 802 ...

  • Cisco Systems 78-15328-01 - page 1186

    Index IN-2 Catalyst 6500 Series S witch Command Reference—Release 7.6 78-15328-01 Address Reco gniti on Protocol See ARP ta b le adj acen cy displaying PBF infor mation 2-843 aggreg ate rate limit clearin g 2-86 aging t ime informatio n displaying 2-676 alias clearin g 2-7 defining 2-206 displaying 2-667 ARP clearin g inspect ion statistics 2-92 ...

  • Cisco Systems 78-15328-01 - page 1187

    Inde x IN-3 Catalyst 6500 Series Switch Command Reference—Release 7.6 78-15328-01 cleari ng NAM boot stri ng 2-11 configurin g auto-config file 2-226 displaying N AM boot string 2-673 setting IDS environment 2-229 setting NAM envir onment 2-229 synchroniz ing aut o-confi g file 2-231 boot c onfi gurat ion regi ster setting 2-223 BOOT envi ronm en ...

  • Cisco Systems 78-15328-01 - page 1188

    Index IN-4 Catalyst 6500 Series S witch Command Reference—Release 7.6 78-15328-01 comm an d al ias es 1-8 comm an d h elp 1-9 comman d-l ine p roce ssing 1-3 comm an d m od es 1-3 console p ort 1-2 ending sessi on 2-182 IP addresses 1-11 IP aliase s 1-11 IPX addr esses 1-11 MAC a ddr esses 1-11 operati ng 1-3 Telne t 1-2 clo ck displaying sum mer ...

  • Cisco Systems 78-15328-01 - page 1189

    Inde x IN-5 Catalyst 6500 Series Switch Command Reference—Release 7.6 78-15328-01 setting 2-12 configuration register ut ility config uring 2-145 console setting port baud rate 2-613 switching console co nnectio n physically t o MSFC on active superviso r engine 2-1111 conta ct p ers on 2-614 conte nt-addr essa ble me mor y See CAM ta ble context ...

  • Cisco Systems 78-15328-01 - page 1190

    Index IN-6 Catalyst 6500 Series S witch Command Reference—Release 7.6 78-15328-01 setting action superviso r engine takes after test failure 2-636 setting level 2-637 system 2-1069 disabling mod ule 2-353 disabling UDLD infor mation display 2-644 displaying c onfigura tion info rmati on 2-1129 display ing cur rent cd comm and setting 2-181 displa ...

  • Cisco Systems 78-15328-01 - page 1191

    Inde x IN-7 Catalyst 6500 Series Switch Command Reference—Release 7.6 78-15328-01 enviro nment displaying inl ine p ow er sta tus 2-720 displaying system status inf ormation 2-720 EPLD config uring up grading proc ess for non-supe rviso r engi ne module im ages 2-162 config uring u pgr ad ing p roce ss f or sup er visor e ngin e images 2-625 disp ...

  • Cisco Systems 78-15328-01 - page 1192

    Index IN-8 Catalyst 6500 Series S witch Command Reference—Release 7.6 78-15328-01 General Att ribute Re gistratio n Protocol See GARP GMRP clearing statistics inf ormation 2-25 disabling Forw ard All 2-266 disabling in a ll VLAN s 2-265 disabling on spe cified po rts 2-398 displayi ng configur ation in format ion 2-735 displaying statistical info ...

  • Cisco Systems 78-15328-01 - page 1193

    Inde x IN-9 Catalyst 6500 Series Switch Command Reference—Release 7.6 78-15328-01 displaying sta tus 2-720 inst ance s assigni ng port path co st 2-594 displaying BPDU sk ew status 2-1023 displaying informa tion summary 2-1048 displaying instan ce information 2-1032 displaying list of MAC addresse s, instan ce num bers, an d timers 2-1025 display ...

  • Cisco Systems 78-15328-01 - page 1194

    Index IN- 10 Catalyst 6500 Series S witch Command Reference—Release 7.6 78-15328-01 clear ing Kerber os real m to DNS domain na me map 2-37 clea ring secr et ke y 2-39 clearin g speci fic Kerbero s entry 2-38 defining sec ret key 2-313 deleting all Kerber os cre dentials 2-36 disabli ng creden tial s forward ing 2-35 disabling m andatory authenti ...

  • Cisco Systems 78-15328-01 - page 1195

    Inde x IN- 11 Catalyst 6500 Series Switch Command Reference—Release 7.6 78-15328-01 MAC c oun ters clearin g 2-21 displaying 2-782 displaying c hanne l po rt ut ilizat ion 2-697 restorin g 2-191 macro s setting Cisco IP Phone configuration macro 2-408 setting Cisco So ftphone config uration macro 2-408 MDG disabling 2-263 enab lin g 2-263 member ...

  • Cisco Systems 78-15328-01 - page 1196

    Index IN- 12 Catalyst 6500 Series S witch Command Reference—Release 7.6 78-15328-01 enabling per- prefix statistics for all FI B entries 2-341 exclu ding Laye r 4 ports in a load-b alanc ing hash 2-340 includi ng Layer 4 por ts in a loa d-bala ncing hash 2-340 resetting NDE filter 2-58 setting ML S aging time 2-336 setting MLS bridged flow stati ...

  • Cisco Systems 78-15328-01 - page 1197

    Inde x IN- 13 Catalyst 6500 Series Switch Command Reference—Release 7.6 78-15328-01 See MDG Multipl e Spannin g Tree See MST N NAM cleari ng NAM boot stri ng 2-11 clearing pa ssword 2-63 disabling SNM P extend ed RMON suppor t 2-535 displaying N AM boot string 2-673 enabl ing SN MP ext ende d RMO N sup por t 2-535 setting boot envi ronment 2-229 ...

  • Cisco Systems 78-15328-01 - page 1198

    Index IN- 14 Catalyst 6500 Series S witch Command Reference—Release 7.6 78-15328-01 peak displaying i nform ation 2-1080 per port utilizati on disabling st atistics da ta export 2-484 displaying pa cket and byte rates 2-782 enabling st atistics data expor t 2-484 policed-d scp table resetting to default 2-85 policy-b ased forw arding See PBF Port ...

  • Cisco Systems 78-15328-01 - page 1199

    Inde x IN- 15 Catalyst 6500 Series Switch Command Reference—Release 7.6 78-15328-01 powering m odule 2-356 power redun dancy turnin g redundan cy betwee n power sup plies on or off 2-439 power suppl ies turnin g re dun dan cy o n o r off 2-439 PRBS displaying c oun ter va lue s 2-897 displaying po rts r unn ing test 2-897 startin g and stop ping ...

  • Cisco Systems 78-15328-01 - page 1200

    Index IN- 16 Catalyst 6500 Series S witch Command Reference—Release 7.6 78-15328-01 mappi ng IP preced ence-to- DSCP 2-467 returnin g to fac tory -set Co S de fault s 2-73 returni ng to factory-set default fo r all packets arriving through un truste d port 2-73 return ing to f act ory -set def ault va lues 2-78 return ing to f act ory -set t hr e ...

  • Cisco Systems 78-15328-01 - page 1201

    Inde x IN- 17 Catalyst 6500 Series Switch Command Reference—Release 7.6 78-15328-01 setting attribu tes in access requests 2-494 setting deadtime 2-495 setting encry ption and authentica tion 2-496 setting time betwee n retransmissions 2-499 setting up RADIUS server 2-498 specifying RADIUS retransmit times 2-497 rcp clearing informatio n 2-90 cop ...

  • Cisco Systems 78-15328-01 - page 1202

    Index IN- 18 Catalyst 6500 Series S witch Command Reference—Release 7.6 78-15328-01 S securit y access lists See se curity ACL security ACL clearin g changes fr om edit buf fer 2-192 committing to NVRAM 2-140 configur ing adjacency 2-505 configurin g log table 2-519 creat ing new ent ry in non-IP V ACL 2-520 creat ing new ent ry in non-IPX VACL 2 ...

  • Cisco Systems 78-15328-01 - page 1203

    Inde x IN- 19 Catalyst 6500 Series Switch Command Reference—Release 7.6 78-15328-01 displaying snm pN otify Tabl e c onf igur ation 2-1001 displaying t arge t a ddres s e ntrie s 2-1004 displayi ng t arge t pa ra met er en tri es 2-1006 enab lin g ex te ndedr mo n 2-535 ena bling of s tandard SNMP link trap 2-434 enab lin g R MON s uppo rt 2-539 ...

  • Cisco Systems 78-15328-01 - page 1204

    Index IN- 20 Catalyst 6500 Series S witch Command Reference—Release 7.6 78-15328-01 displaying V LAN infor mation 2-1014 displaying VLA N p ath cost 2-1040 enab lin g 2-566 enab lin g B ac kb one Fas t 2-555 enab lin g BPDU pack et fil ter ing 2-556, 2-592 enab l in g B P DU s ke w in g 2-558 enab l ing in s tan ce 2-566 enab ling MA C addre ss r ...

  • Cisco Systems 78-15328-01 - page 1205

    Inde x IN- 21 Catalyst 6500 Series Switch Command Reference—Release 7.6 78-15328-01 Telne t 1-2 swit ch fabr ic channel displayi ng c oun ter info rm ati on 2-727 displaying sw itch mo de a nd statu s 2-727 displaying utiliz ation 2-727 Switch Fabric Module conf iguring LC D bann ers 2-219 displayi ng L CD bann er s 2-671 switching from acti ve s ...

  • Cisco Systems 78-15328-01 - page 1206

    Index IN- 22 Catalyst 6500 Series S witch Command Reference—Release 7.6 78-15328-01 disabling supp ression of a ccounting in formati on 2-199 disabling TA CACS+ d ire cte d-req ue st op tio n 2-632 displaying a ccounti ng informat ion 2-662 displaying a uthori zation info rmation 2-670 displaying pr otocol con figura tion 2-1064 enab lin g ac co ...

  • Cisco Systems 78-15328-01 - page 1207

    Inde x IN- 23 Catalyst 6500 Series Switch Command Reference—Release 7.6 78-15328-01 traps displaying st atus inf orma tio n 2-911 trunk clearin g VLAN from allowe d VLAN list 2-129 displaying informatio n 2-1081 displaying po rt inf orma tio n 2-912 restorin g tr unk po rt t o de fa ult t runk t ype an d mode 2-129 trunk p orts adding V LANs 2-64 ...

  • Cisco Systems 78-15328-01 - page 1208

    Index IN- 24 Catalyst 6500 Series S witch Command Reference—Release 7.6 78-15328-01 mappin g res er ved VL ANs to n onr es er ved VLANs 2-652 VTP confi gurat ion cauti on 2-130 VLAN ACL See VACL VLAN memb ership setting assignment to port 2-411 VLAN path cost displaying 2-1040 VLANs mappi ng instan ces 2-648 VMPS config uri ng serv er 2-656 delet ...

  • Cisco Systems 78-15328-01 - page 1209

    Inde x IN- 25 Catalyst 6500 Series Switch Command Reference—Release 7.6 78-15328-01 ...

Manufacturer Cisco Systems Category Switch

Documents that we receive from a manufacturer of a Cisco Systems 78-15328-01 can be divided into several groups. They are, among others:
- Cisco Systems technical drawings
- 78-15328-01 manuals
- Cisco Systems product data sheets
- information booklets
- or energy labels Cisco Systems 78-15328-01
All of them are important, but the most important information from the point of view of use of the device are in the user manual Cisco Systems 78-15328-01.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Cisco Systems 78-15328-01, service manual, brief instructions and user manuals Cisco Systems 78-15328-01. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Cisco Systems 78-15328-01.

Similar manuals

A complete manual for the device Cisco Systems 78-15328-01, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Cisco Systems 78-15328-01 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Cisco Systems 78-15328-01.

A complete Cisco Systems manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Cisco Systems 78-15328-01 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Cisco Systems 78-15328-01, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Cisco Systems 78-15328-01, that we can find in the current document
3. Tips how to use the basic functions of the device Cisco Systems 78-15328-01 - which should help us in our first steps of using Cisco Systems 78-15328-01
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Cisco Systems 78-15328-01
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Cisco Systems 78-15328-01 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Cisco Systems 78-15328-01?

Use the form below

If you did not solve your problem by using a manual Cisco Systems 78-15328-01, ask a question using the form below. If a user had a similar problem with Cisco Systems 78-15328-01 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)