Manual A.O. Smith ST 1500

12 pages 0.94 mb
Download

Go to site of 12

Summary
  • A.O. Smith ST 1500 - page 1

    INSTALLATION INSTRUCTIONS AND USERS MANUAL HOT WATER STORAGE TANKS MODEL: ST 1500-3000 FOREWORD Before attempting to install th is water heater please read the insta llation instructions. An authorized installer must install the heat er an d commission it according to the local valid requirements. A.O. SMITH CANNOT ACCEPT ANY RESPONSIBILITY FOR GUA ...

  • A.O. Smith ST 1500 - page 2

    CONTENTS 1. GENERAL 1.1 Description of the heater 3 1.2 Controls 3 1.3 Dimensions 3 1.4 Technical data 5 2. FOR THE INSTALLER 2.1 Installation 5 2.2 Water connections 6 2.3 Commissioning 7 2.3.1 Filling the heater 7 2.3.2 Heater start-up 7 2.4 Shutting down 7 2.5 Maintenance 7 2.5.1 Anode 7 2.5.2 Descaling 7 2.6 Spare parts 8 3. FOR THE END - USER ...

  • A.O. Smith ST 1500 - page 3

    1. GENERAL 1.1 Description of the heater Construction of the heater is in accordance wi th the European standard f or water heaters or sanitary use. The heaters are suitable for use with a working pressure of up to 7 bar. The cylindrical tank is made from sheet steel . For protection agains t corrosion, the inside of the tank is glass-lined. The ta ...

  • A.O. Smith ST 1500 - page 4

    1.4 Technical specifications ST 1500/2000 ST 2500/3000 1 Storage capacity ltr 1500/2000 2500/3000 2 Tank heat loss kWh/24h 8.5 10.1 3 Maximum working pressure bar 7 7 4 Test pressure tank bar 12 12 5 Maximum allowed tank temperature °C 95 95 6 Weight empty kg 374/506 637/739 2. FOR THE INSTALLER 2.1 Installation A qualified, competent installer mu ...

  • A.O. Smith ST 1500 - page 5

    Back-up element 6 1 = drain (on small tanks only) 2 = valve 3 = check valve 4 = pressure relive valve 5 = circulation pump sanitary water 6 = temperature sensor for boiler three way valve A = circulation line B = wa rm wat er C = cold water E = boiler water hot F = boiler water return Optional backup elements are available for field installation up ...

  • A.O. Smith ST 1500 - page 6

    2.3 Commissioning 2.3.1 Filling the tank 1. Check if any installed drain valve is closed. 2. Open the cold-water supply valve to the heater 3. Open all hot-water outlets in order to bleed all air from the system . The heater is filled when cold water runs out of all outlets. 4. Close all hot water taps 2.3.2 Start up Check if the heater is filled w ...

  • A.O. Smith ST 1500 - page 7

    2.5.2 Descaling Calcium precipitation depends on the water properties and the hot water demand. In addition, calcium precipitation in the tanks in creases at high water tem peratures. A clean out opening is located at the front for inspecting and des caling the tank. The clean out opening can be reached via the cover plate on the outer jacket of th ...

  • A.O. Smith ST 1500 - page 8

    4. WARRANTY 4.1 Warranty in general If within one year of the origin al installa tion date of the tank s upplied by A.O. Sm ith any part or component other than the tank sh all prove upon examination by A.O. Smith, and in the exclusive opinion of the latter, to be defective in material and/or workmanship, A.O. Smith will exchange or rep air such pa ...

  • A.O. Smith ST 1500 - page 9

    4.4 Exclusions The warranty ensuing from sections 4.1 and 4.2 will be null and void: a. If the tank has been damaged by external causes. b. In case of misuse, neglect (including fros t damage), incorrect or improper use of the tank, or if attempts have been made to repair leaks; c. In the case of ingress of contamin ants or other particles into the ...

  • A.O. Smith ST 1500 - page 10

    ST 1500-3000 series Kit installation instructions 1 – Contents of flange kit Bag A Flange plate Designation Quantity Bolts 6 Gasket 1 Flange plate 1 Bag D 1 Bag D Flange collar and cover fixation screws and bracket s Designation Quantite Brackets 3 Parker screws 5 Flange collar and cover Installation manuals 10 ...

  • A.O. Smith ST 1500 - page 11

    2 – Mounting instructions for flange cov ers, anodes, T&P and insulation package IMPORTANT: Start with mounting two plug anodes in the lo wer and center anode opening on the side of the tank. In the top anode opening you need to mount the o utlet anode with T-piece for T&P relieve valve (included) and ther mometer (not included). Make sur ...

  • A.O. Smith ST 1500 - page 12

    3 – Mounting instruction for rigid jacket Center each jacket segment on one of the feet .. Nota : top panels, once placed, fixate the jacket. 4 – Mounting of the flexible jacket Install the flexible jacket before mounting the cl ean out colla r and cover. The colla r serves as mould to cut the required opening in the jacket. In case the zipper ...

Manufacturer A.O. Smith Category Electric Heater

Documents that we receive from a manufacturer of a A.O. Smith ST 1500 can be divided into several groups. They are, among others:
- A.O. Smith technical drawings
- ST 1500 manuals
- A.O. Smith product data sheets
- information booklets
- or energy labels A.O. Smith ST 1500
All of them are important, but the most important information from the point of view of use of the device are in the user manual A.O. Smith ST 1500.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals A.O. Smith ST 1500, service manual, brief instructions and user manuals A.O. Smith ST 1500. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product A.O. Smith ST 1500.

A complete manual for the device A.O. Smith ST 1500, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use A.O. Smith ST 1500 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of A.O. Smith ST 1500.

A complete A.O. Smith manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual A.O. Smith ST 1500 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the A.O. Smith ST 1500, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the A.O. Smith ST 1500, that we can find in the current document
3. Tips how to use the basic functions of the device A.O. Smith ST 1500 - which should help us in our first steps of using A.O. Smith ST 1500
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with A.O. Smith ST 1500
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of A.O. Smith ST 1500 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning A.O. Smith ST 1500?

Use the form below

If you did not solve your problem by using a manual A.O. Smith ST 1500, ask a question using the form below. If a user had a similar problem with A.O. Smith ST 1500 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)