Manual LevelOne LevelOne 8+8 POE 10/100 Mbps Web Smart Switch

44 pages 2.04 mb
Download

Go to site of 44

Summary
  • LevelOne LevelOne 8+8 POE 10/100 Mbps Web Smart Switch - page 1

    LevelOne FSW-1670TX 8+8 POE 10/100 Mbps Web Smart Switch User’s Manual ...

  • LevelOne LevelOne 8+8 POE 10/100 Mbps Web Smart Switch - page 2

    ...

  • LevelOne LevelOne 8+8 POE 10/100 Mbps Web Smart Switch - page 3

    i TABLE OF CONTENT About This Guide ....................................................................... 1 Purpose .................................................................................. 1 Terms/Usage .......................................................................... 1 Introduction ............................................. ...

  • LevelOne LevelOne 8+8 POE 10/100 Mbps Web Smart Switch - page 4

    ii Installing the Web M anagement Utility ................................. 15 Discovery List ....................................................................... 16 Monitor List ........................................................................... 17 Device Se tting ...................................................................... 19 ...

  • LevelOne LevelOne 8+8 POE 10/100 Mbps Web Smart Switch - page 5

    1 ABOUT THIS GUIDE Congratulations on your pu rchase of the FSW-1670TX 8+8POE 10/100Mbps Web Smart Switch. This Switch integrates 100Mbps Fast Ethernet and 10Mbps Etherne t network capabilities in a highly flexible pa ckage. Since this switch’s Port- 1 to Port-8 is Power over Et hern et (PoE) ports, it will automatically detect the presen ce of I ...

  • LevelOne LevelOne 8+8 POE 10/100 Mbps Web Smart Switch - page 6

    ...

  • LevelOne LevelOne 8+8 POE 10/100 Mbps Web Smart Switch - page 7

    3 INTRODUCTION This chapter describes the features of the FSW-1670TX 8+8POE 10/100Mbps Web Smart Switch and some b ackground information about Ethernet/Fast Ethernet switching technology. Fast Ethernet Technology The growing importance of LANs an d the increasing complexity of desktop computing applications are fueling the nee d for high performanc ...

  • LevelOne LevelOne 8+8 POE 10/100 Mbps Web Smart Switch - page 8

    4 Switching Technology Another approach to pushing beyond the limits of Ethernet technology is the development of switching technology. A switch bridges Ethern et packets at the MAC address level of the Ethernet protocol transmitting among conne cted Ethernet or Fast Ethernet LAN segments. Switching is a cost-effectiv e way of increasing the total ...

  • LevelOne LevelOne 8+8 POE 10/100 Mbps Web Smart Switch - page 9

    5 VLAN (Virtual Local Area Network) A VLAN is a group of end-station s that are not constrained by their physical location and can communicate as if a common broadcast domain, a LAN. The pr imary utility of using VLAN is to reduce latency and ne ed for routers, using faster switchin g instead. Other VLAN utility includes: Security, Security is incr ...

  • LevelOne LevelOne 8+8 POE 10/100 Mbps Web Smart Switch - page 10

    6 separate electrical wirin g and power outlets. Features  16×10/100M bps Auto-negotiation Fast Ethernet RJ45 ports with 8- port PoE function (port-1 ~ port-8)  Compliant with IEEE 802.3af specific ation  Supports PoE power maximum 15.4W for each PoE p ort s  Supports PoE Powered Device (PD) classific ation identify  Each port suppo ...

  • LevelOne LevelOne 8+8 POE 10/100 Mbps Web Smart Switch - page 11

    7 UNPACKING AND INSTALLATION This chapter provide s unpacking and installation information fo r the Switch. Unpacking Open the shipping cartons of the Switch and carefully unpacks its contents. The carton shoul d contain the following items:  FSW-1670TX 8+8POE 10/100Mb ps Web Smart Switch  One AC power cord  Four rubber feet pad s  Rack ...

  • LevelOne LevelOne 8+8 POE 10/100 Mbps Web Smart Switch - page 12

    Install the Switch on a sturdy, le vel surface that can support its weight, or in an EIA standard-size equipment rack. For information on rack instal lation, see the next section, Ra ck Mounting . When installing the S witch on a level surface, attach the rubbe r feet to the bottom of each device. The rubber feet cushion the hub and protect the hub ...

  • LevelOne LevelOne 8+8 POE 10/100 Mbps Web Smart Switch - page 13

    9 Connecting Network Cable The Switch support 16 10/100M Ethernet ports and Port 1 ~ port 8 are PoE Enable ports, these P oE port will automatically activated when a compatible terminal is identified, the Switch will supply power through the Et hernet port to the connected PoE device. For the Legacy devices that are not y et compatible, the PoE por ...

  • LevelOne LevelOne 8+8 POE 10/100 Mbps Web Smart Switch - page 14

    ...

  • LevelOne LevelOne 8+8 POE 10/100 Mbps Web Smart Switch - page 15

    IDENTIFYING EXTERNAL COMPONENTS This chapter describes the front panel , rear panel, and LED indicators of the Switch. Front Panel The figure below shows the front panel of the Switch. Figure 3. Front panel of the Switch LED Indicator: Comprehensive LED indicators di splay the status of the switch and the network (see the LED Indicato rs chapter be ...

  • LevelOne LevelOne 8+8 POE 10/100 Mbps Web Smart Switch - page 16

    Card) or switch and hub. Ethernet Ports (Port 9~16): These ports support network speed s of either 10Mbps or 100Mbps, and can operat e in half- and full- duplex transfer modes. These ports also suppo rts automatic MDI/MDIX crossover detection fun ction gives true “plug and play” capability, just need to plug-in the network cable t o the hub dir ...

  • LevelOne LevelOne 8+8 POE 10/100 Mbps Web Smart Switch - page 17

    UNDERSTANDING LE D INDICATORS The front panel LEDs provides instant status feedback, and, helps monitor and troubleshoot when needed. Figure 5. LED indicators of the Switch Power and System LEDs POWER: Power Indicator On : When the Power LED lights on, the Switch is receiving power. Off : When the Power turns off or the po wer cord has improper con ...

  • LevelOne LevelOne 8+8 POE 10/100 Mbps Web Smart Switch - page 18

    14 100Mbps On : When the 100Mbps LED lights on, the respective port is connected to a 100Mbps Fast Ethernet network. Off : When the respective port is connected to a 10Mbps Ethernet network PoE Status Green : When the PoE device was connected and the port supplies power successfully. Red : When the PoE port have the following failure happens:  P ...

  • LevelOne LevelOne 8+8 POE 10/100 Mbps Web Smart Switch - page 19

    15 CONFIGURATION Through the Web Bro wser you can configure the Switch such as VLAN, Trunking, and QoS… etc. With the attached Web Management Utility, you can easily discover all the Web Management Switch, assign the IP Address, changing the password a nd upgrading the new firmware. Installing the Web Management Utility The following gives instru ...

  • LevelOne LevelOne 8+8 POE 10/100 Mbps Web Smart Switch - page 20

    Figure 6. Web Management Utility The Web Management Utility was divided into four parts, Discovery List, Monitor List, Device Setting and Toolbar function , for details instruction, follow the below secti on. Discovery List This is the list where you can di scover all the Web management devices in the entire network. By pressing the “Discovery” ...

  • LevelOne LevelOne 8+8 POE 10/100 Mbps Web Smart Switch - page 21

    System word definitions in the Discov ery List:  M AC Address: Shows the device MA C Address.  IP Address: Shows the cu rrent IP address of the device.  Protocol version: Shows the versi on of the Utility protocol.  Product Na me: Shows the device product name.  System Nam e: Shows the appointed device system n ame.  Location: Sh ...

  • LevelOne LevelOne 8+8 POE 10/100 Mbps Web Smart Switch - page 22

     Gateway: Shows the Gateway set of the device. View Trap: The Trap function can receive the events that happen from the Web Manageme nt Switch in the Monitor List. There is a light indicator behind the “View Trap” but ton, when the light indicates in green, it means that there is no trap transmitted, and else when it indi cates in red, it me ...

  • LevelOne LevelOne 8+8 POE 10/100 Mbps Web Smart Switch - page 23

    Add Item: To add a device to the Monitor List manually, enter the IP Address of the device that you want to monitor. Delete Item: To delete the device in the Monitor List. Device Setting You can set the device by using the function key in the Device Setting Dialog box. Configuration Setting: In this Configuration Setting, you can set the IP Address ...

  • LevelOne LevelOne 8+8 POE 10/100 Mbps Web Smart Switch - page 24

    Figure 10. Password Change Firmware Upgrade: When the device has a ne w function, there will be a new firmware to update the device, use thi s function to update. Figure 11. Web Access: Double click th e device in the Monitor List or select a device in the Monitor List and press this “Web Access” button to access the device in Web browser. Tool ...

  • LevelOne LevelOne 8+8 POE 10/100 Mbps Web Smart Switch - page 25

    21 Monitor Save: To record t he setting of the Monitor List to the default, when you open the We b Management Utility next time, it will auto load the default recorded setting. Monitor Save As: To re cord the setting of the Monitor List in appointed filename and file path. Monitor Load: To manually load the setting file of the Monitor List. Exit: T ...

  • LevelOne LevelOne 8+8 POE 10/100 Mbps Web Smart Switch - page 26

    how to configure the Switch to enab le its smart functions including:  Port Setting (Speed/Disable, Flow Control and Port Bandwidth Rate Ingress/Egre ss)  VLAN Setting (802.1Q VLAN)  Trunking  Port Mirroring  QoS Setting  PoE Setting  System Setting  Device status and Statistic Login Before you configure this device, note th ...

  • LevelOne LevelOne 8+8 POE 10/100 Mbps Web Smart Switch - page 27

    Or through the Web M anagement Utility, you do not need to remember the IP Address, sel ect the device shown in the Monitor List of the Web Management Utility to settle the device on the Web Browser. When the following dialog pag e appears, remain enter the default password "admin" and press Login to ente r the main configuration window. ...

  • LevelOne LevelOne 8+8 POE 10/100 Mbps Web Smart Switch - page 28

    Setup Menu When the main page appears, find the Setup menu in the left side of the screen (Figure 15). Clic k on the setup item that you want to configure. There are eleven options: Port Settings, VLAN Settings, Trunk Settings, Mirror Settings, QoS Settings, PoE Settings, Device Status, St atistic, System Settings, Trap Setting, Password Settings, ...

  • LevelOne LevelOne 8+8 POE 10/100 Mbps Web Smart Switch - page 29

    Port Settings In Port Settings menu (Figure 16 ), this page will show each port’s status, press the ID para meter to set each port’s Speed, Flow Control, Rate Control Ingress and Egress . When you need to renew the posted information, pre ss the “Refresh” button. The Link Status in the screen will show the connection speed and duplex mode; ...

  • LevelOne LevelOne 8+8 POE 10/100 Mbps Web Smart Switch - page 30

    26 Speed/Disable: This setting has six modes— 100M Full , 100M Half , 10M Full , 10M Half, Auto and Disable —for speed o r port disable selections. Flow Contr ol: This setting determines whethe r or not the Switch will be handling flow control. Set FlowCtrl to Enable for avoiding data transfer overflow. Or it set s to Disable ; there is either ...

  • LevelOne LevelOne 8+8 POE 10/100 Mbps Web Smart Switch - page 31

    VID: select the VID group that you set. When you select VID Table Setting, press “Add new VID” to create new VID group, fro m port 01 ~ port 16, sele ct Untag Port, Tag Port or Not Member for ea ch port. To save the VID group, press “Apply” button. To remove the selected VID group, select the VID group and press “Remove th e VID” button ...

  • LevelOne LevelOne 8+8 POE 10/100 Mbps Web Smart Switch - page 32

    Trunk Setting The Trunk function enables to cascade two device s with a double times bandwidth (up to 1600Mb ps in full duplex mode). There are 4 selection for the trunk setting, port “09,10”, port “09,10,11,12”, port “09,10,11,12,13,14 ,15,16” or sel ect “disable” for closing this function. Figure 20. Trunk Settings Be sure that th ...

  • LevelOne LevelOne 8+8 POE 10/100 Mbps Web Smart Switch - page 33

    RX (receive) mode: this mode will duplicate the data that send to the source and forward to the sniffer port. Both (transmit and receiv e) mode: this mode will duplicate both the data transmit from and data that send to the source port, then it will forward to the sniffer port. Figure 21. QoS Setting There are three selections in QoS setting, Disab ...

  • LevelOne LevelOne 8+8 POE 10/100 Mbps Web Smart Switch - page 34

    Port Based: to set the Switch QoS by port based, select the ports which need to high er the quality by changing Norm al to High. Figure 24. IEEE 802.1p Based: to set the Switch QoS base on IEEE 802.1p, Figure 25. PoE Setting When click on the PoE Setting, the status of the PoE will present on the screen, it will sh ow the PoE Enable, Priority, Powe ...

  • LevelOne LevelOne 8+8 POE 10/100 Mbps Web Smart Switch - page 35

    Figure 26. Press “Refresh” button to refresh the status of the PoE. Press click on the ID parameter to enter to the selected port to configure the PoE settings, sel ect enable to activate the PoE function from port 1 to port 8, and di sable to deactivate the PoE function. Click “Apply” button to save the setting. Figure 27. Device Status Cl ...

  • LevelOne LevelOne 8+8 POE 10/100 Mbps Web Smart Switch - page 36

    Statistic The Statistic Menu screen will show the status of each p ort packet count. Figure 28. Statistic For Detail packet information, click on the ID parameter as Figure 29. Figure 29. 32 ...

  • LevelOne LevelOne 8+8 POE 10/100 Mbps Web Smart Switch - page 37

    System Setting The System Setting includes t he Web Server P ort, System name, Location name, Login Timeout, IP Address, Subnet Ma sk and Gateway. Through the Web Man agement Utility, you can easily recognize the device by using the System Name and the Location Name. The Login Timeout is to set the idle time-o ut for security issue, when there is n ...

  • LevelOne LevelOne 8+8 POE 10/100 Mbps Web Smart Switch - page 38

    Trap Setting The Trap Setting enables the device to monitor the Trap through the Web Manage ment Utility, set the Trap IP Address of the manager where the trap to be sent . Figure 31. Trap Setting  System Ev ents: Monitoring the system’s trap. Device Bootup: a trap when bootin g up the system. Illegal Login: a trap when there is using a wrong ...

  • LevelOne LevelOne 8+8 POE 10/100 Mbps Web Smart Switch - page 39

     PoE Events: Monitoring the PoE ports status. PoE Power fail: a trap when the port’s power source is fail or the PD64012 is fail. Power on/Power down: a trap when the PoE po rt’s power is on and down. Power over current: a trap when the PoE port’s power is over current. Power short circuit : a trap when the PoE port’s powe r circuit was ...

  • LevelOne LevelOne 8+8 POE 10/100 Mbps Web Smart Switch - page 40

    Backup Setting The backup tools help you to backup the current setting of the Switch. Once you need to backup the setting, press the “Backup” button to save the setting. To restore a cur rent setting file to the device, you must specify the backup file and press “Restore” button to proceed the setting of the recorded file. Figure 33. Backup ...

  • LevelOne LevelOne 8+8 POE 10/100 Mbps Web Smart Switch - page 41

    Logout When press this function, the web configuratio n will go back to first Login page. Figure 35. Logout 37 ...

  • LevelOne LevelOne 8+8 POE 10/100 Mbps Web Smart Switch - page 42

    ...

  • LevelOne LevelOne 8+8 POE 10/100 Mbps Web Smart Switch - page 43

    39 TECHNICAL SPECIFICATIONS General Standards IEEE 802.3 10BAS E-T Ethernet IEEE 802.3u 100B ASE-TX Fast Ethernet IEEE 802.3x Full Duplex Flow Control IEEE 802.3af comp liant Protocol CSMA/CD Data Transfer Rate Ethernet: 10Mbps (half duplex ), 20Mbps (full-duplex ) Fast Ethernet: 100Mbps ( half duplex), 200Mbps (full- duplex) Topology Star Network ...

  • LevelOne LevelOne 8+8 POE 10/100 Mbps Web Smart Switch - page 44

    40 Physical and Environmental AC inputs 100-240V AC, 50-60 Hz internal univ ersal power supply Power Consumption 9Watts (max. no PD Dev ice connected) 130Watts (max. with 8 x 15.4 w PoE Device conne cted) Temperature Operating: 0 ° ~ 40 ° C, Sto rage: -10 ° ~ 70 ° C Humidity Operating: 10% ~ 9 0%, Storage: 5% ~ 90% Dimensions 440 x 140 x 44 mm ...

Manufacturer LevelOne Category Network Hardware

Documents that we receive from a manufacturer of a LevelOne LevelOne 8+8 POE 10/100 Mbps Web Smart Switch can be divided into several groups. They are, among others:
- LevelOne technical drawings
- 8+8 POE 10/100 Mbps Web Smart Switch manuals
- LevelOne product data sheets
- information booklets
- or energy labels LevelOne LevelOne 8+8 POE 10/100 Mbps Web Smart Switch
All of them are important, but the most important information from the point of view of use of the device are in the user manual LevelOne LevelOne 8+8 POE 10/100 Mbps Web Smart Switch.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals LevelOne LevelOne 8+8 POE 10/100 Mbps Web Smart Switch, service manual, brief instructions and user manuals LevelOne LevelOne 8+8 POE 10/100 Mbps Web Smart Switch. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product LevelOne LevelOne 8+8 POE 10/100 Mbps Web Smart Switch.

A complete manual for the device LevelOne LevelOne 8+8 POE 10/100 Mbps Web Smart Switch, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use LevelOne LevelOne 8+8 POE 10/100 Mbps Web Smart Switch by users. Manuals are usually written by a technical writer, but in a language understandable to all users of LevelOne LevelOne 8+8 POE 10/100 Mbps Web Smart Switch.

A complete LevelOne manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual LevelOne LevelOne 8+8 POE 10/100 Mbps Web Smart Switch - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the LevelOne LevelOne 8+8 POE 10/100 Mbps Web Smart Switch, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the LevelOne LevelOne 8+8 POE 10/100 Mbps Web Smart Switch, that we can find in the current document
3. Tips how to use the basic functions of the device LevelOne LevelOne 8+8 POE 10/100 Mbps Web Smart Switch - which should help us in our first steps of using LevelOne LevelOne 8+8 POE 10/100 Mbps Web Smart Switch
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with LevelOne LevelOne 8+8 POE 10/100 Mbps Web Smart Switch
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of LevelOne LevelOne 8+8 POE 10/100 Mbps Web Smart Switch in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning LevelOne LevelOne 8+8 POE 10/100 Mbps Web Smart Switch?

Use the form below

If you did not solve your problem by using a manual LevelOne LevelOne 8+8 POE 10/100 Mbps Web Smart Switch, ask a question using the form below. If a user had a similar problem with LevelOne LevelOne 8+8 POE 10/100 Mbps Web Smart Switch it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)