Manual RCA X3000

68 pages 8.62 mb
Download

Go to site of 68

Summary
  • RCA X3000 - page 1

    L yra Portable Multi-Media Recor der Changing Entertainment. Again. X3000 (Rev 3.0) User’ s Guide ...

  • RCA X3000 - page 2

    FCC and Industry Canada Information This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and fou ...

  • RCA X3000 - page 3

    End-User License Agr eement IMPOR T ANT : READ CAREFULL Y BEFORE DO WNLO ADING OR INST ALLING THIS SOFTW ARE! THIS END USER LICENSE AGREEMENT (THIS “EULA”) IS A LEGAL AGREEMENT BETWEEN YOU AND THOMSON INC., OR ANY THOMSON GROUP ENTITY , AS DEFINED BELO W (COLLECTIVEL Y “THOMSON ENTITY”), FOR THE R CA OR THOMSON BRANDED POR T ABLE DIGIT AL A ...

  • RCA X3000 - page 4

    (c) If you fail to comply with any of the terms of this EULA, in whole or part, your license will automatically terminate without notice from THOMSON Entity . (d) U pon termination of this EUL A and your associated license, you shall cease all use of the P rogram and destroy or permanently erase the P rogram and all full or partial copies thereof. ...

  • RCA X3000 - page 5

    Y ou may not reverse engineer , decompile, or disassemble the WMA Software, except and only to the extent that such activity is expr essly permitted by applicable law . Y ou may transfer your right to use the Device F irmware only as part of a sale or transfer of your A/V Device, on the condition that the recipient agrees to the conditions set fort ...

  • RCA X3000 - page 6

    ZiLOG Softwar e End-User License Agreement ZiLOG CORPORA TION AND/OR ITS SUBSIDIARIES (“ZiL OG”) IS WILLING T O LICENSE THE SOFTW ARE TO Y OU AS AN INDIVIDUAL, THE COMP ANY , OR THE LEGAL ENTIT Y THA T WILL BE UTILIZING THE SOFTW ARE ONL Y ON THE CONDITION THA T YOU ACCEPT ALL OF THE TERMS OF THIS LICENSE AGREEMENT . READ THE TERMS AND CONDITIO ...

  • RCA X3000 - page 7

    T able of Contents 1 Gr aphics contained in this publication are for repr esentation only . Chapter 1: Before Y ou Begin Things to consider before you get started... ...................................................................................................................... 3 Computer System Requirements .................................. ...

  • RCA X3000 - page 8

    T able of Contents 2 Chapter 4: Playing Files Basic Screen Information .............................................................................................................................................. 28 Basic Operation ..................................................................................................................... ...

  • RCA X3000 - page 9

    3 Chapter 1: Befor e Y ou Begin Gr aphics contained in this publication are for repr esentation only . Things to consider befor e you get started... This user’ s guide reflects features implemented in v ersions 1.05.04 or higher of the L yra P or table M ulti-media Recorder software/ firmware. Please visit www .rca.com/digitalaudiodownloads for ...

  • RCA X3000 - page 10

    Chapter 1: Befor e Y ou Begin 4 Chapter 1 Things to consider befor e you get started... (continued) Important Battery Information • The battery used in this device may present a risk of fire or chemical burn if mistreated. Do not separately r echarge, disassemble, heat above 100ºC (212ºF), or incinerate. • Do not attempt to open the unit. N ...

  • RCA X3000 - page 11

    Chapter 1: Befor e Y ou Begin Chapter 1 5 What you want to do Go to page... The items below ar e four main features of the L yra P ortable Multi-media R ecorder . If you ’ re a first time L yra Recorder user Install software ......................................................................................................................... ...

  • RCA X3000 - page 12

    Chapter 1: Befor e Y ou Begin 6 Chapter 1 Overview of buttons and jacks The following pages explain what each button does — some of the buttons have mor e than one function depending upon whether or not you ’ re playing music, videos, or viewing photos. 9 4 7 8 1 2 6 3 Front View 1. Remote control sensor 2. LCD (Liquid Crystal Display) scr een ...

  • RCA X3000 - page 13

    Chapter 1: Befor e Y ou Begin Chapter 1 7 T op V iew Stand – F lip the stand out to place the L yra Recorder upright on a surface. ST AND RELEASE button – P ress to release the stand from the left side of the L yra Recorder . MIC (internal microphone) RECORD button – Displays the Recor ding Mode options menu. ON/OFF button – T urns the L yr ...

  • RCA X3000 - page 14

    Chapter 1: Befor e Y ou Begin 8 Chapter 1 Bottom View Reset button – If your L yra Recorder appears to be locked up, press the R eset button (the unit will be reset). Docking connection – This is where the L yra Recorder connects to the docking station. USB jack – Attach the small end (T ype mini-B) on the USB cable here. Attach the large end ...

  • RCA X3000 - page 15

    Chapter 1: Befor e Y ou Begin Chapter 1 9 Docking Station (Back view) LINE OUT jack – Attach the line out cable here when you ’ re connecting the L yra Recorder to an audio/video input component, such as a stereo receiver , TV , V CR, set-top box, or camcorder . LINE IN jack – Attach the line in cable here when you ’ re connecting the L yra ...

  • RCA X3000 - page 16

    Chapter 1: Befor e Y ou Begin 10 Chapter 1 IR DC I N IN OU T LI NE - - CABLE/ ANTENNA TV VIDEO L/MONO R S-VIDEO AUDIO L IN OUT AC POWER USB 2.0 OPTICAL VIDEO LEFT AUDIO RIGHT S-VIDEO VIDEO LEFT AUDIO RIGHT S-VIDEO COAXIAL Ethernet SET -TOP BOX/ VCR/ or other AV sources Connecting the Docking Station to Y our Components The docking station is a conv ...

  • RCA X3000 - page 17

    Chapter 1: Befor e Y ou Begin Chapter 1 11 Why Y ou Should Connect the IR Blaster The supplied IR blaster cable allows your L yra P ortable Multi-media R ecorder to control your cable box, satellite receiver , VCR, or other A V sources for timer recordings. IR blaster cable How to Find the Remote Sensor Y ou have to place the IR blaster in front of ...

  • RCA X3000 - page 18

    Chapter 1: Befor e Y ou Begin 12 Chapter 1 Setting Up Y our L yra Portable Multi-Media Recorder There are a few things you ’ll want to set up the first time you use your L yra Recorder , including setting the clock and the type of signal you want to use if you are connecting the unit to an external TV . Clock 1. From the main menu, pr ess the ar ...

  • RCA X3000 - page 19

    Chapter 1: Befor e Y ou Begin Chapter 1 13 Softwar e Setup Install software in your computer (Windows XP and 2000 support only) The Audio/V ideo Management CD that came with your L yra P ortable Multi-media R ecorder contains the software components that y ou will need to make your L yra Recorder work pr operly . These components do the following: ...

  • RCA X3000 - page 20

    Chapter 1: Befor e Y ou Begin 14 Chapter 1 COMPUTER DIGIT A L USB PORT Updating the L yra Firmware Y ou can upgrade your L yra Recorder by do wnloading the latest firmware from http://www .rca.com/digitalaudiodownloads. Notes: If any audio files were added to the device through Windows Explorer or if the firmware is upgraded, you must profile y ...

  • RCA X3000 - page 21

    Chapter 1: Befor e Y ou Begin Chapter 1 15 L yraDJ L yraDJ is software that can easily generate playlists for you, after analyzing the acoustic characteristics of your songs, the software will create sets of r elated content that you can listen to and enjoy . Important Note : 1. L yraDJ will only work with mp3 files. 2. L yraDJ will only work with ...

  • RCA X3000 - page 22

    Chapter 1: Befor e Y ou Begin 16 Chapter 1 T ransferring Files to Y our L yra Recorder (MTP USB Pr otocol) Important : Secure music download files must be transferred to your L yra Recorder through Windows Media Player 10 or higher (Windows Media Player 10 is only available to Windows XP users.) or the application recommended by the online music d ...

  • RCA X3000 - page 23

    Chapter 1: Befor e Y ou Begin Chapter 1 17 1. Connect your L yra Recorder to the computer and open W indows M edia Player , select Librar y from the menu bar , a screen will appear as shown below Note : Content displayed will vary depending on the content on your computer . 2. From the left column, select the songs, categories and/or playlist items ...

  • RCA X3000 - page 24

    Chapter 2: The Remote Contr ol 18 Gr aphics contained in this publication are for repr esentation only . Button Descriptions for L yra Mode In addition to operating your L yra Recor der , the remote that came with it can operate your other components. Ho wever , this page only describes the buttons on the remote you will use with your L yra Recorde ...

  • RCA X3000 - page 25

    Chapter 2: The Remote Contr ol Chapter 2 19 Button Descriptions for Other Components The remote operates most brands of other components (VCRs, D VD players, satellite receivers, etc.). The following list provides basic information about how these buttons operate in these modes. Indicator U sed to indicate status of remote control when programming ...

  • RCA X3000 - page 26

    Chapter 2: The Remote Contr ol 20 Chapter 2 Find out if the r emote can operate your TV This remote control is designed to operate most R CA, GE, and Proscan TVs. 1. Press the TV button. 2. Press the ON•OFF button (if the TV turns on or off, this r emote will operate the TV ). 3. If that doesn ’ t work, you can try programming the remote by fol ...

  • RCA X3000 - page 27

    Chapter 2: The Remote Contr ol Chapter 2 21 Pr ogramming the remote to operate other components There are two ways to program this r emote control to operate other brands of satellite receivers or cable boxes: Dir ect Entr y and Automatic Code S earch (both methods are described below). Note : This remote may not be compatible with all brands and m ...

  • RCA X3000 - page 28

    Chapter 2: The Remote Contr ol 22 Chapter 2 Understanding the INPUT button Another important button is the INPUT button. The INPUT button accesses program material from a specific component (eg: VID1/VID2/F ront). W e call these channels, Video I nput Channels, because you are telling the component to send the video (and audio) that corresponds to ...

  • RCA X3000 - page 29

    Chapter 3: Using the Setup Menu 23 Gr aphics contained in this publication are for repr esentation only . Setup Menu The Setup menu allows y ou to make changes to the Audio, Video, and Photo settings, as well as make changes to the main functions of the L yra P or table M ulti-media Recorder . Display P ress the right arrow button to view the D isp ...

  • RCA X3000 - page 30

    Chapter 3: Using the Setup Menu 24 Chapter 3 Display Settings Menu L CD Timeout Press the right arro w button to set a time for the LCD screen backlight to turn off: N ever , 2 minutes, 30 seconds, 20 seconds, 15 seconds, 10 seconds, 5 seconds, 2 seconds, and Off . P ower T imeout P ress the right arrow button to set a time for the po wer of the un ...

  • RCA X3000 - page 31

    Chapter 3: Using the Setup Menu Chapter 3 25 T imers Allows you to set timers for your recordings. P ress the right arrow button to choose the timer you want. P ress the right arrow again to enter , the following timer settings appear . U se the arrow buttons to make your selections. Status T ur ns the timer on or off Rename N ame of the timer reco ...

  • RCA X3000 - page 32

    Chapter 3: Using the Setup Menu 26 Chapter 3 Audio Settings Menu V oice Label Allows you to recor d a voice message to any file. Press the right arr ow button and then the up or down arro w to turn the voice label on or off. The default is Off. Equalizer Allows you to select a specific equalizer setting to adjust the v arious levels of the audio ...

  • RCA X3000 - page 33

    Chapter 3: Using the Setup Menu Chapter 3 27 Clock Settings Menu Date P ress the right arrow button to highlight the month setting, then press the up or down arro w button to select the current month. P ress the right arrow button to highlight the day , then press the up or down arro w button to select the current day . F ollow the same procedure t ...

  • RCA X3000 - page 34

    Chapter 4: Playing Files 28 Gr aphics contained in this publication are for repr esentation only . Basic Information The L yra P or table M ulti-media Recorder is able to play video and music, view pictures, and also store any computer files. The 20 GB hard drive storage allo ws you to: • Stor e and vie w up to approximately 80 hours of video ? ...

  • RCA X3000 - page 35

    Chapter 4: Playing Files Chapter 4 29 Basic Operation The information in this section presumes you ’ ve successfully transferred files to your L yra Recorder , and you ’ re ready to play different types of files. If you need specific setup information (downloading music, transferring files, installing softwar e), go to Chapter 1. If you wan ...

  • RCA X3000 - page 36

    Chapter 4: Playing Files 30 Chapter 4 Recor ding Video to Y our L yra Recorder Recording fr om an Audio/Video Component Y ou can record video fr om video components that have video output jacks, such as a TV , VCR, cable box, or satellite box, using the supplied Line In cable. Notes: If you want to record at a lower quality to take up less space, o ...

  • RCA X3000 - page 37

    Chapter 4: Playing Files Chapter 4 31 T ransferring V ideo Files to L yra Recorder (MSC USP Pr otocol) Y ou can transfer video files to your L yra P ortable Multi-media Recor der using Windows Explorer . Important: In order to transfer video files using Windows XP to your L yra Recorder , you must set the USB Protocol setting to MSC in the Setup ...

  • RCA X3000 - page 38

    Chapter 4: Playing Files 32 Chapter 4 Playing Video T o select and play a video from the main menu: 1. Press the up or do wn arrow button to highlight V ideo and press SELECT . Video content appears on the right side of the screen in the same folder or file structure as it ’ s stored on the hard drive. 2. Press the up or do wn arrow button to hi ...

  • RCA X3000 - page 39

    Chapter 4: Playing Files Chapter 4 33 Video Options Menu The Video O ptions menu allows you to use mor e advanced features, such as mo ving files, tagging files, renaming, and other file management. T o bring up the Video Options menu, press SELECT when highlighting a video from the file menu. T o select an option, use the up or down arro w but ...

  • RCA X3000 - page 40

    Chapter 4: Playing Files 34 Chapter 4 Viewing Video Content on Y our TV Y ou can view video content stored on the hard drive of y our L yra Recorder using the supplied Line Out cable if your TV has Audio and Video Input jacks. 1. Make sure your L yra Recorder is off . 2. Connect the 3.5mm mini-plug end of the cable to the LINE OUT/IN jack on your L ...

  • RCA X3000 - page 41

    Chapter 4: Playing Files Chapter 4 35 Recor ding Audio to Y our L yra Recorder Recording fr om Y our Audio Receiver Y ou can record audio fr om an audio/video component, such as an audio receiver , using the supplied Line In cable if the component has audio output jacks. Notes: Y ou might want to change the Audio Record Quality setting in the Setup ...

  • RCA X3000 - page 42

    Chapter 4: Playing Files 36 Chapter 4 Audio Recordings Banner T o change audio settings during playback, press the SELECT button (the Audio Recor dings banner appears). P ress the up or down arrow button to highlight differ ent settings, then press the left or right arrow buttons to make changes to the setting or choose another option. If necessary ...

  • RCA X3000 - page 43

    Chapter 4: Playing Files Chapter 4 37 T ransferring Audio Files to Y our L yra Recorder Y ou can transfer audio files to your L yra P ortable Multi-media Recor der via Y ahoo! M usic Engine, Windo ws Explorer ( M y Computer ) Windo ws Media Player 10, or your favorite music jukebo x software. Important: In order to transfer secure music files usi ...

  • RCA X3000 - page 44

    Chapter 4: Playing Files 38 Chapter 4 Playing Music T o select and play a song from the main menu: 1. Press the up or do wn arrow button to highlight M usic and press SELECT to enter the M usic navigation mode. The follo wing options are displayed: All Songs – displays all available songs Artist – displays songs according to Artist, Album, and ...

  • RCA X3000 - page 45

    Chapter 4: Playing Files Chapter 4 39 Cr eating Music Playlists 1. From the M usic main menu, press the up or down arro w button and highlight Playlists. 2. Press SELECT and N ew Playlist and Open appear . Highlight and select N ew Playlist , and the on-screen keyboard appears so you can name the playlist. U se the arrow buttons to enter a name, or ...

  • RCA X3000 - page 46

    Chapter 4: Playing Files 40 Chapter 4 Music Playback Screen The following screen is an example of what the music playback scr een might look like when playing a music file. Artist, Album, Song T itle, Genre, and Y ear- Displays the metadata(ID3) tag information contained in the file, if available. If no metadata tag information is available, the ...

  • RCA X3000 - page 47

    Chapter 4: Playing Files Chapter 4 41 Music Settings Banner T o change music settings for each song during playback, press the SELECT button (the M usic Settings banner appears). Press the up or do wn arrow button to highlight different settings, then press the left or right arro w buttons to make changes to the setting or choose another option. If ...

  • RCA X3000 - page 48

    Chapter 4: Playing Files 42 Chapter 4 Playing Y our L yra Recorder on Y our Stereo System Y our L yra Recorder came with a Line Out Cable that you can use to connect your L yra to your audio system. 1. Make sure your L yra Recorder is off . 2. Connect the 3.5mm mini-plug end of the cable to the LINE IN/OUT jack on your L yra Recorder play er . 3. C ...

  • RCA X3000 - page 49

    Chapter 4: Playing Files Chapter 4 43 T ransferring Photo Files to Y our L yra Recorder Y ou can transfer photo files to your L yra P ortable Multi-media Recor der using Windows Explorer . If your L yra Recorder isn ’ t already connected to your computer , connect it using the provided M ini-USB cable (go to page 14 for information on connecting ...

  • RCA X3000 - page 50

    Chapter 4: Playing Files 44 Chapter 4 Photos Options Menu The Photos Options menu allows y ou to use more advanced features, such as mo ving files, tagging files, renaming, deleting, and other file management. T o bring up the Photos Options menu, press SELECT when navigating your photo library . T o select an option, use the up and down arro w ...

  • RCA X3000 - page 51

    Chapter 4: Playing Files Chapter 4 45 Creating a Photo Slideshow 1. From the P hotos main menu, press the up or down arro w button and highlight Slidesho ws. 2. Press SELECT and N ew Slideshow and Open appear . Highlight and select N ew Slidesho w , and the on-screen keyboard appears so y ou can name the slideshow . Use the arrow buttons to enter a ...

  • RCA X3000 - page 52

    Chapter 4: Playing Files 46 Chapter 4 Recor ding V oice Labels With this feature, you can r ecord short audio clips to be played when you choose a picture, much like the M usic Clips feature for songs. 1. Make sure the V oice Label setting is turned on in the Setup menu. Keep in mind voice labels will not be played if this setting is turned off, ev ...

  • RCA X3000 - page 53

    Chapter 4: Playing Files Chapter 4 47 Playing Audible Files An audible file is an audio book or other audio program that can be stored on your L yra P ortable Multi-media R ecorder , just like an mp3 file or any other file. F or more information about A udible and the products it offers, visit Audible.com. There is also an install option availab ...

  • RCA X3000 - page 54

    Chapter 4: Playing Files 48 Chapter 4 Audible Playback Screen The following screen is an example of what an audible playback scr een might look like. 1 Playback M ode - During playback, the play icon arrow is highlighted (as in graphic above). When you pause playback, the pause icon is highlighted. During forward or reverse playback, the or icons a ...

  • RCA X3000 - page 55

    Chapter 4: Playing Files Chapter 4 49 Viewing Files F iles mode allows you to access all the contents on your hard drive. T o view all files from the main menu: 1. Press the up or do wn arrow button to highlight F iles and press SELECT . All available folders are listed first (in alphabetical order), follow ed by all file items (in alphabetical ...

  • RCA X3000 - page 56

    Chapter 4: Playing Files 50 Chapter 4 Options Menu Items The Video, M usic, Photos, and F iles, Audible Options menus allow you to use mor e advanced features, such as opening files, tagging files, deleting, and other file management. T o bring up the Options menus, press SELECT when navigating or playing y our files. T o select an option, use ...

  • RCA X3000 - page 57

    Chapter 4: Playing Files Chapter 4 51 Using the On-Scr een Keyboard The on-screen keyboard is used to name new files, playlists, slidesho ws, or folders or rename existing items. N ames can be up to 32 characters in length (including file extension). 1. Use the arro w buttons to navigate around the keyboard. 2. Press SELECT when you ’ ve highli ...

  • RCA X3000 - page 58

    Chapter 4: Playing Files 52 Chapter 4 High-Speed Car d Reader The L yra Recorder also functions as a high-speed SD/MMC card r eader when a SD/MCC memor y card is properly inserted into the device. If a memory card is properly inserted and you wish to view the contents of the card when connected to a computer via USB port, the device’ s USB protoc ...

  • RCA X3000 - page 59

    Chapter 4: Playing Files Chapter 4 53 Copying Files from the L yra Recorder to the Memory Card Important: In order to transfer files remove to your L yra Recorder , you must set the USB Protocol setting to MSC in the Setup menu before connecting to computer . Refer to page 23 on how to change USB Protocol. See page 56 for more information on USB P ...

  • RCA X3000 - page 60

    Chapter 5: Additional Information 54 Gr aphics contained in this publication are for repr esentation only . Tips and T roubleshooting Songs ar en ’t listed in any of the audio sort modes (Album, G enre, T itle, Audio F iles). • The contents of the L yra Recorder haven ’ t been profiled (sorted) since the last file transfer . When all files ...

  • RCA X3000 - page 61

    Chapter 5: Additional Information Chapter 5 55 Photo files added to the har d drive through Windo ws Explorer via drag and drop do not appear in P hotos navigation mode. • Photo content must be stored on the har d drive in the PHO TOS system folder in or der to be properly recognized and av ailable for playback. Sub-folders may be cr eated under ...

  • RCA X3000 - page 62

    Chapter 5: Additional Information 56 Chapter 5 Ho w do I stop content from playing on the L yra Recorder (wher e is the STOP button)? • U se the ON/OFF button on the top of the L yra Recorder . Press and release the button quickly to stop playback. Why does the lock graphic show up on my L yra Recorder when I pr ess a key? • The mode switch, fo ...

  • RCA X3000 - page 63

    Chapter 5: Additional Information Chapter 5 57 TV (Programmable to TV button) HDTV Apex ......................................................... 7015 Daewoo .................................................... 7004 Hitachi ...................................................... 7005 JVC ............................................................ 7 ...

  • RCA X3000 - page 64

    Chapter 5: Additional Information 58 Chapter 5 T atung ................................. 1039,1047,1065 T echnics ................................................. 1078 T echwood ................. 1035,1066,1068, 1078 T eknika .............1036,1037,1049,1052,1061, 1064,1066,1067,1068,1070, 1071,1074,1075,1081,1084 T elecaption .................... ...

  • RCA X3000 - page 65

    Chapter 5: Additional Information Chapter 5 59 Precision ....................................................2036 Quasar .......................................................2024 Realistic ..................................................... 2038 Zenith ........................................................2024 Digital Network Recorder Sony .. ...

  • RCA X3000 - page 66

    Chapter 5: Additional Information 60 Chapter 5 Limited W arranty (U.S.) What y our warranty covers: • Defects in materials or workmanship . F or how long after y our purchase: • 90 days from date of purchase - U nit repair or exchange, which includes parts and labor . • 91 days to 1 year from date of purchase - U nit repair or exchange, which ...

  • RCA X3000 - page 67

    Chapter 5: Additional Information Chapter 5 61 What y our warranty does not cover: • Acts of nature, such as but not limited to lightning damage. • Adjustment of customer controls. • Damage from misuse or neglect. • A unit that has been modified or incorporated into other products or is used for institutional or other commercial purposes. ...

  • RCA X3000 - page 68

    Thomson  Inc. 10330 North Meridian Street Indianapolis, IN 46290 Please do not send any products to the Indianapolis address listed in this manual or on the carton. This will only add delays in service for your product. ©2006 Thomson Inc. T rademark(s)® Registered Marca(s) Registrada(s) Printed in China TOCOM 56189710 THOMSON Visit the RCA web ...

Manufacturer RCA Category DVD Recorder

Documents that we receive from a manufacturer of a RCA X3000 can be divided into several groups. They are, among others:
- RCA technical drawings
- X3000 manuals
- RCA product data sheets
- information booklets
- or energy labels RCA X3000
All of them are important, but the most important information from the point of view of use of the device are in the user manual RCA X3000.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals RCA X3000, service manual, brief instructions and user manuals RCA X3000. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product RCA X3000.

Similar manuals

A complete manual for the device RCA X3000, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use RCA X3000 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of RCA X3000.

A complete RCA manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual RCA X3000 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the RCA X3000, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the RCA X3000, that we can find in the current document
3. Tips how to use the basic functions of the device RCA X3000 - which should help us in our first steps of using RCA X3000
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with RCA X3000
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of RCA X3000 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning RCA X3000?

Use the form below

If you did not solve your problem by using a manual RCA X3000, ask a question using the form below. If a user had a similar problem with RCA X3000 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)