Manual Cisco Systems 6500

570 pages 4.96 mb
Download

Go to site of 570

Summary
  • Cisco Systems 6500 - page 1

    Corporate Headquarters Cisco Systems, In c. 170 West Tasman Drive San Jose, CA 951 34-1706 USA http://www.ci sco.com Tel: 408 526-4000 800 553-NETS (638 7) Fax: 408 526-4100 Catal yst 650 0 S eries S witc h Cisco IOS S of tw are Configuration Guide— Release 12 . 1 E Cisco IOS Release 12.1 E Customer Order Number: DO C-7814099= Text Part Number: 7 ...

  • Cisco Systems 6500 - page 2

    THE SPECIFICATION S AND INFORMAT ION REGARDING THE PRODUCTS IN THIS MANU AL ARE SUBJECT TO CHANGE W ITHOUT NOTICE. A LL STATEMENTS , INFORMATION, AND RECOMMENDATI ONS IN THI S MANUAL ARE BE LIEVED TO BE A CCURATE BUT ARE PRESENTED WI THOUT WARRANTY OF ANY KIND, EX PRESS OR IMPLIED. USERS MUST TAKE FULL RESPO NSIBILITY FOR THEIR APPLICAT ION OF ANY ...

  • Cisco Systems 6500 - page 3

    3 Catalyst 6500 Series Switch Cisco IOS So ftware Configuration Guide—Release 12.1 E 78-14099-04 CONTENTS Preface 21 Audience 21 Organization 21 Related Documentation 23 Conventi ons 24 CHAPTER 1 Product Overview 1 Configuring Embedded CiscoView Support 2 Understanding E mbedded CiscoView 2 Installing and Configuring Em bedded CiscoView 2 Display ...

  • Cisco Systems 6500 - page 4

    Contents 4 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Protecting Access to Privileged EXEC Co mmands 15 Setting or Changing a Static En able Password 15 Using the enable password and enable secret Comman ds 15 Setting or Changing a Line Password 16 Setting TACACS+ Password Protection for Privil ...

  • Cisco Systems 6500 - page 5

    Contents 5 Catalyst 6500 Series Switch Cisco IOS So ftware Configuration Guide—Release 12.1 E 78-14099-04 Performing a Fast Softw are Upgrade 9 Copying Files to an MSFC 10 CHAPTER 6 Configuring Interfaces 1 Understanding Inte rface Configuration 1 Using the Interface Command 2 Configuring a Range of Interfaces 4 Defining and Using Interface-Range ...

  • Cisco Systems 6500 - page 6

    Contents 6 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Understanding th e VTP Domain 2 Understanding VTP Modes 2 Understanding VTP Advertisements 2 Understanding VTP Version 2 3 Understan ding VTP Prun ing 3 VTP Default Configuration 5 VTP Configuration Guidelines and Re strictions 5 Configuring ...

  • Cisco Systems 6500 - page 7

    Contents 7 Catalyst 6500 Series Switch Cisco IOS So ftware Configuration Guide—Release 12.1 E 78-14099-04 CHAPTER 11 Configuring Cisco IP Phone Support 1 Understanding Cisco IP Phone Support 1 Cisco IP Phone Connections 1 Cisco IP Phone Voice Traffic 2 Cisco IP Phone Data Traffic 3 Cisco IP Phone Power Configuration s 3 Default Cisco IP Phone Sup ...

  • Cisco Systems 6500 - page 8

    Contents 8 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Preconfiguration Tasks 6 Configuring 802.1Q Tunnel Ports 6 Configuring the Switch to Tag Native VLAN Traffic 7 Understanding Ho w Layer 2 Protocol T unneling Works 7 Configuring Support for Layer 2 Protocol Tunneling 8 CHAPTER 15 Configuring ...

  • Cisco Systems 6500 - page 9

    Contents 9 Catalyst 6500 Series Switch Cisco IOS So ftware Configuration Guide—Release 12.1 E 78-14099-04 Configuring the Hello Time 32 Configuring the Forward-Delay Time for a VLAN 32 Configuring the Maximum Aging Time for a VLAN 33 Enabling Rapid-PVST 33 Configuring IEEE 802.1s MST 34 Enabling MST 34 Displaying MST Configurations 36 Configuring ...

  • Cisco Systems 6500 - page 10

    Contents 10 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 CHAPTER 18 Configuring IP Multicast Layer 3 Switching 1 Understanding Ho w IP Multicast Layer 3 Switch ing Works 1 IP Multicast Layer 3 Switching Overview 2 Multicast Layer 3 Switching Cache 2 IP Multicast Layer 3 Switching Flow Mask 3 Laye ...

  • Cisco Systems 6500 - page 11

    Contents 11 Catalyst 6500 Series Switch Cisco IOS So ftware Configuration Guide—Release 12.1 E 78-14099-04 IP MLS Operation 5 Default IP MLS Configuration 6 IP MLS Configuration Guidelin es and Restrictions 6 Configuring IP MLS 6 Enabling IP MLS Globally 6 Disabling and Enabling IP MLS on a Layer 3 Interface 7 Displaying the Interface IP MLS Conf ...

  • Cisco Systems 6500 - page 12

    Contents 12 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Troubleshooting IPX MLS 14 CHAPTER 21 Configuring IG MP Snooping 1 Understanding Ho w IGMP Snooping Works 1 IGMP Snooping Overview 2 Joining a Multicast Gro up 2 Leaving a Multicast Group 4 Understanding IGMP Snooping Querier 5 Understandin ...

  • Cisco Systems 6500 - page 13

    Contents 13 Catalyst 6500 Series Switch Cisco IOS So ftware Configuration Guide—Release 12.1 E 78-14099-04 Configuring CBAC on Catalyst 6500 Series Switche s 7 Configuring MAC Address-Based Traffic Blocking 8 Configuring VLAN ACLs 8 Understanding VACL s 8 Configuring VACLs 11 Configuring VACL Logging 17 Configuring TCP Intercept 18 Configuring Un ...

  • Cisco Systems 6500 - page 14

    Contents 14 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Initializing Authentication fo r the Client Connected to a Port 11 Changing th e Quiet Period 11 Changing the Switch-to -Client Retransmission Time 12 Setting the Switch-to-Client Retrans mission Time for EAP-Request Frames 13 Setting the S ...

  • Cisco Systems 6500 - page 15

    Contents 15 Catalyst 6500 Series Switch Cisco IOS So ftware Configuration Guide—Release 12.1 E 78-14099-04 CHAPTER 30 Configuring CDP 1 Understanding Ho w CDP Works 1 Configuring CDP 1 Enabling CDP Globally 2 Displaying the CDP Global Configuration 2 Enabling CDP on a Port 2 Displaying the CDP Interface Configuration 3 Monitoring and Maintaining ...

  • Cisco Systems 6500 - page 16

    Contents 16 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Configuring DSCP Value Maps 66 Configuring PFC QoS Statistics Data Export 70 CHAPTER 32 Configuring UDLD 1 Understanding How UDLD Works 1 UDLD Overview 1 UDLD Aggressive Mode 2 Default UDLD Configuration 3 Configuring UDLD 3 Enabling UDLD G ...

  • Cisco Systems 6500 - page 17

    Contents 17 Catalyst 6500 Series Switch Cisco IOS So ftware Configuration Guide—Release 12.1 E 78-14099-04 Local SPAN and RSPAN Guidelines and Restrictions 6 VSPAN Guidelines and Restrictions 7 RSPAN Guidelines and Restrictions 7 Configuring Local SPAN and RSPAN 8 Local SPAN and RSPAN Configuration Overview 8 Configuring RSPAN VLANs 9 Configuring ...

  • Cisco Systems 6500 - page 18

    Contents 18 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 CHAPTER 36 Configuring SNMP IfIndex Persistence 1 Understanding SNMP IfIndex Persistenc e 1 Configuring SNMP IfIndex Persistence 1 Enabling and Disabling SNMP IfIndex Persistence Globally 2 Enabling and Disabling SNMP IfIndex Persistence on ...

  • Cisco Systems 6500 - page 19

    Contents 19 Catalyst 6500 Series Switch Cisco IOS So ftware Configuration Guide—Release 12.1 E 78-14099-04 APPENDIX A Acronyms 1 INDEX ...

  • Cisco Systems 6500 - page 20

    Contents 20 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 ...

  • Cisco Systems 6500 - page 21

    21 Catalyst 6500 Series Switch Cisco IOS So ftware Configuration Guide—Release 12.1 E 78-14099-04 Preface This preface describes who shoul d read the Catalyst 6500 Series Switc h Cisco IOS Softwar e Confi gurati on Guide , ho w it is or ganized, and its document co n ven tions. Audience This guide is for e xperienced network ad ministrators who a ...

  • Cisco Systems 6500 - page 22

    22 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Preface Organization Chapter 11 Config uring Cisco IP Phone Support Describes ho w to confi gure Cisco IP Phone support. Chapter 12 Configuring Layer 3 Interfaces Describes ho w to configur e LAN interfaces to support Layer 3 features. Chapter 13 Co ...

  • Cisco Systems 6500 - page 23

    23 Catalyst 6500 Series Switch Cisco IOS So ftware Configuration Guide—Release 12.1 E 78-14099-04 Preface Related Documentation Related Documentation The follo wing publications are av ailable for the Catalyst 6500 series switches: • Catalyst 6500 Series Switch Inst allation Guide • Catalyst 6500 Series Switch Modu le Installation Gui de • ...

  • Cisco Systems 6500 - page 24

    24 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Preface Conventions – Softwar e System Err or Messages – Deb ug Command Ref er ence – Internetwork Design Guide – Internetwork T roubl eshooting Guide – Config uration Bu ilder Getting Sta rted Guide The Cisco IOS Conf iguration Guides and ...

  • Cisco Systems 6500 - page 25

    25 Catalyst 6500 Series Switch Cisco IOS So ftware Configuration Guide—Release 12.1 E 78-14099-04 Preface Conventions Cautions use the following con v entions: Caution Means re a d e r b e c a re f u l . In this situation, you might do something that could result in equipment damage or loss of data. Obtaining Documentation and Submitting a Servic ...

  • Cisco Systems 6500 - page 26

    26 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Preface Conventions ...

  • Cisco Systems 6500 - page 27

    CH A P T E R 1-1 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 1 Product Overview The Cisco IOS on the Catalyst 6500 Series Switches prod uct supports the follo wing hardware and software: • Supervisor En gine 2, Policy Feature Card 2 (PFC2), and M ultilayer Switch Feature Card 2 (MSFC2); and in ...

  • Cisco Systems 6500 - page 28

    1-2 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 1 Product Overview Configuring Embedde d CiscoView Support Configuring Embedded CiscoView Support These sections describe the Embedded CiscoV ie w su pport av ailable wi th Release 12.1(20)E and later releases: • Understanding Embedded Ci ...

  • Cisco Systems 6500 - page 29

    1-3 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 1 Product Overview Configuring Embedd ed CiscoView Support For more information about web access to the switch , refer to “Using the Cisco W eb Brow ser” in the IOS Conf iguratio n Fundamentals Conf iguration Guide at this URL: http://ww ...

  • Cisco Systems 6500 - page 30

    1-4 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 1 Product Overview Configuring Embedde d CiscoView Support ...

  • Cisco Systems 6500 - page 31

    CH A P T E R 2-1 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 2 Command-Line Interfaces This chapter descr ibes the comma nd-line inte rfaces (C LIs) you use to configure the Catalyst 6500 series switches. Note For complete syntax and usage in formation for the co mmands used in this chap ter , re ...

  • Cisco Systems 6500 - page 32

    2-2 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 2 Command-Line Inter faces Accessing the CLI T o make a console connection, perfor m this task: After making a console connection , you see this display: Press Return for Console prompt Router> enable Password: Router# Accessing the CLI ...

  • Cisco Systems 6500 - page 33

    2-3 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 2 Command-Line Interfaces Performing Command Line Processing This exampl e shows ho w to open a T elnet session to the switch: unix_host% telnet Router_1 Trying 172.20.52.40... Connected to 172.20.52.40. Escape character is '^]'. U ...

  • Cisco Systems 6500 - page 34

    2-4 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 2 Command-Line Inter faces Cisco IOS Command Mode s Cisco IOS Command Modes Note For complete inform ation about Cisco IOS command modes, refer to t he Cisco IOS Configuration Fundamentals Conf iguration Guide an d the Cisco IOS Conf igurat ...

  • Cisco Systems 6500 - page 35

    2-5 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 2 Command-Line Interfaces Displaying a List of Cisco IOS Comman ds and Syntax The Cisco IOS command interpreter , called the EXEC, interprets and e xecutes the commands you enter . Y ou can abbre viate commands and ke ywords by ente ring jus ...

  • Cisco Systems 6500 - page 36

    2-6 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 2 Command-Line Inter faces ROM-Monitor Command-Line Interface For e xample: Router# configure ? memory Configure from NV memory network Configure from a TFTP network host overwrite-network Overwrite NV memory from TFTP network host terminal ...

  • Cisco Systems 6500 - page 37

    CH A P T E R 3-1 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 3 Configuring the Switch for the First Time This chapter contai ns information about how to initia lly conf igure the Catalyst 6500 series switch, which supplements the administrat ion information and p rocedures in these publicat ions: ...

  • Cisco Systems 6500 - page 38

    3-2 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 3 Config uri ng the Switch fo r the First Time Configuring the Switch Configuring the Switch These sections describe ho w to configure the sw itch: • Using the Setup Facility or t he setup Command, page 3-2 • Using Conf iguration Mode, ...

  • Cisco Systems 6500 - page 39

    3-3 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 3 Configuri ng the Switch for the First Time Configuring the Switch When you enter the setup command, current system conf iguration defaul ts are displayed in square brackets [ ] as y ou mov e through the setup command process and are querie ...

  • Cisco Systems 6500 - page 40

    3-4 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 3 Config uri ng the Switch fo r the First Time Configuring the Switch Copyright (c) 1986-2001 by cisco Systems, Inc. Compiled Wed 28-Mar-01 18:36 by hqluong Image text-base: 0x30020980, data-base: 0x306B8000 Start as Primary processor 00:00 ...

  • Cisco Systems 6500 - page 41

    3-5 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 3 Configuri ng the Switch for the First Time Configuring the Switch --- System Configuration Dialog --- Continue with configuration dialog? [yes/no]: y At any point you may enter a question mark '?' for help. Use ctrl-c to abort co ...

  • Cisco Systems 6500 - page 42

    3-6 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 3 Config uri ng the Switch fo r the First Time Configuring the Switch GigabitEthernet1/1 172.20.52.34 YES NVRAM up up GigabitEthernet1/2 unassigned YES TFTP administratively down down GigabitEthernet3/1 unassigned YES TFTP administratively ...

  • Cisco Systems 6500 - page 43

    3-7 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 3 Configuri ng the Switch for the First Time Configuring the Switch Note An enable secret password can contain from 1 to 25 uppercase and lowercase alphanumeric characters; an enable password can contain any number of uppercase and lowercase ...

  • Cisco Systems 6500 - page 44

    3-8 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 3 Config uri ng the Switch fo r the First Time Configuring the Switch shutdown no ip address ! interface GigabitEthernet1/2 shutdown no ip address ! . <...output truncated...> .! end [0] Go to the IOS command prompt without saving thi ...

  • Cisco Systems 6500 - page 45

    3-9 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 3 Configuri ng the Switch for the First Time Configuring the Switch When you reach and respond to the configuration dialog for the last in stalled interface, your interface configuration is complete. Step 3 Check and veri fy the entire list ...

  • Cisco Systems 6500 - page 46

    3-10 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 3 Config uri ng the Switch fo r the First Time Configuring the Switch For detailed int erface configuration i nformatio n, refer to the Cisco IOS Inte rface Configuration Guide at this URL: http://www .cisco.com/uni vercd/cc/td/ doc/produc ...

  • Cisco Systems 6500 - page 47

    3-11 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 3 Configuri ng the Switch for the First Time Configuring the Switch Current configuration: Current configuration : 3441 bytes ! version 12.1 service timestamps debug datetime localtime service timestamps log datetime localtime no service pa ...

  • Cisco Systems 6500 - page 48

    3-12 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 3 Config uri ng the Switch fo r the First Time Configuring the Switch Configuring a Default Gateway Note The switch uses the default g atew ay only when it is not conf igured with a routing protocol. T o send data to another subn et when t ...

  • Cisco Systems 6500 - page 49

    3-13 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 3 Configuri ng the Switch for the First Time Configuring the Switch This example shows ho w to use the show running-conf ig command to conf irm the conf iguration of the pre viously conf igured static route: Router# show running-config Buil ...

  • Cisco Systems 6500 - page 50

    3-14 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 3 Config uri ng the Switch fo r the First Time Configuring the Switch Configuring a BOOTP Server The Bootstrap Protocol (BOO TP) automatically assi gns an IP address b y a dding the MA C and IP addresses of the interface to the BOO TP serv ...

  • Cisco Systems 6500 - page 51

    3-15 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 3 Configuri ng the Switch for the First Time Protecting A ccess to Privileged EXEC Commands Protecting Access to Privileged EXEC Commands The follo wing tasks provide a w ay to control access to the system configuratio n f ile and privilege ...

  • Cisco Systems 6500 - page 52

    3-16 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 3 Config uri ng the Switch fo r the First Time Protecting Ac cess to Pr ivileged EXEC Commands Use either of these commands with the level op tion to defi ne a password for a specif ic pri vilege le vel. After you specify the le vel and se ...

  • Cisco Systems 6500 - page 53

    3-17 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 3 Configuri ng the Switch for the First Time Protecting A ccess to Privileged EXEC Commands When you set T A CA CS password protecti on at the pri vileged EXEC mode, the enable EXEC co mmand prompts for both a ne w username and a password. ...

  • Cisco Systems 6500 - page 54

    3-18 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 3 Config uri ng the Switch fo r the First Time Protecting Ac cess to Pr ivileged EXEC Commands For e xample, if you want many users to hav e acce ss to the clear line command, you can assign it lev el 2 security and dist ribute the le vel ...

  • Cisco Systems 6500 - page 55

    3-19 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 3 Configuri ng the Switch for the First Time Recovering a Lost Enable Pa ssword Exiting a Privilege Level T o exit to a sp ecified pri vilege le vel, perform this task: Displaying the Password, Access Leve l, and Privilege Level Configurati ...

  • Cisco Systems 6500 - page 56

    3-20 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 3 Config uri ng the Switch fo r the First Time Modifying the Supervisor En gine Startup Configuration Modifying the Supervisor Engine Startup Configuration These sections descri be how the startup configuration on the superv isor engine wo ...

  • Cisco Systems 6500 - page 57

    3-21 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 3 Configuri ng the Switch for the First Time Modifying the Sup ervisor Eng ine Startup Configuration The R OM monitor has these features: • Power -on confidence test • Hardware initializat ion • Boot capability (manual boot and aut ob ...

  • Cisco Systems 6500 - page 58

    3-22 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 3 Config uri ng the Switch fo r the First Time Modifying the Supervisor En gine Startup Configuration Modifying the Boot Field and Using the boot Command The confi guration register bo ot fi eld determines whether or not the switch loads a ...

  • Cisco Systems 6500 - page 59

    3-23 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 3 Configuri ng the Switch for the First Time Modifying the Sup ervisor Eng ine Startup Configuration Modifying the Boot Field Y ou modify the boot f ield from the software conf iguration register . T o modify the software configurati on reg ...

  • Cisco Systems 6500 - page 60

    3-24 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 3 Config uri ng the Switch fo r the First Time Modifying the Supervisor En gine Startup Configuration Verifying the Configur ation Register Setting Enter the show ve rsi on EXEC command to verify the current conf iguration register set tin ...

  • Cisco Systems 6500 - page 61

    3-25 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 3 Configuri ng the Switch for the First Time Modifying the Sup ervisor Eng ine Startup Configuration Flash Memory Features The Flash memory compon ents allo w you to do the foll owing : • Copy the system image to Fl ash memory using TFTP ...

  • Cisco Systems 6500 - page 62

    3-26 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 3 Config uri ng the Switch fo r the First Time Modifying the Supervisor En gine Startup Configuration CONFIG_FILE Environment Variable For Class A Flash f i le systems, the CONFIG_FILE en vironment v ariable specifies the f ile system and ...

  • Cisco Systems 6500 - page 63

    3-27 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 3 Configuri ng the Switch for the First Time Modifying the Sup ervisor Eng ine Startup Configuration Setting the BOOTLDR En vironment Variable T o set the BOO TLDR en vironment v ariable, perform this task: This example sho ws how to set th ...

  • Cisco Systems 6500 - page 64

    3-28 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 3 Config uri ng the Switch fo r the First Time Modifying the Supervisor En gine Startup Configuration ...

  • Cisco Systems 6500 - page 65

    CH A P T E R 4-1 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 4 Configuring EHSA Supervisor Engine Redundancy W ith 12.1 E releases earlier than Release 12.1( 13)E, the Catalyst 6500 series switch support s dual supervisor engines with EHSA. Note EHSA is not supported in Release 12.1(13)E and l at ...

  • Cisco Systems 6500 - page 66

    4-2 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 4 Configuring EHSA Supervisor Engine Redu ndancy Supervisor Engine Redun dant Operation EHSA standby mode provides the fol lowing features: • Auto-startup and bootv ar synchronization between acti ve and red undant supervisor engines • ...

  • Cisco Systems 6500 - page 67

    4-3 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 4 Configuring EHSA Supervisor Engine Redundancy Supervisor Engine Redun dant Operation Note If the redundant supervisor en gine is runnin g Catalyst operating system softw a re, remov e the acti ve supervisor engin e and boot the switch with ...

  • Cisco Systems 6500 - page 68

    4-4 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 4 Configuring EHSA Supervisor Engine Redu ndancy Supervisor Engine Redun dant Operation Router(config-r-mc)# end Router# copy running-config startup-config Note T o manually synchr onize only indi vidual elements of th e standard au to-sync ...

  • Cisco Systems 6500 - page 69

    4-5 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 4 Configuring EHSA Supervisor Engine Redundancy Supervisor Engine Redun dant Operation Use the following command to cop y a file to the bootflash: de vice on a redundant supervisor engine: Router# copy source_device : source_filename slavesu ...

  • Cisco Systems 6500 - page 70

    4-6 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 4 Configuring EHSA Supervisor Engine Redu ndancy Supervisor Engine Redun dant Operation ...

  • Cisco Systems 6500 - page 71

    CH A P T E R 5-1 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 5 Configuring RPR and RPR+ Supervisor Engine Redundancy Release 12.1(13)E and later releases support supe rvi sor engine redund ancy with Route Processor Redundancy (RPR) and Route Processor Redundanc y Plus (RPR+). This chapter describ ...

  • Cisco Systems 6500 - page 72

    5-2 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 5 Configuring RPR and RPR+ Supe rvisor Engine Redundancy Understanding Superviso r Engine Redundancy RPR Operation RPR supports the follo wing features: • Auto-startup and bootv ar synchronization between acti ve and red undant supervisor ...

  • Cisco Systems 6500 - page 73

    5-3 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 5 Configuring RPR an d RPR+ Supervisor Engine R edundancy Understanding Superviso r Engine Redundancy RPR+ enhances RPR b y providing th e follow ing additional benef its: • Reduced switchov er time Depending on the conf iguration, the swi ...

  • Cisco Systems 6500 - page 74

    5-4 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 5 Configuring RPR and RPR+ Supe rvisor Engine Redundancy Supervisor Engine Redun dancy Guidelines and Restrictio ns Supervisor Engine Redundancy Guidelines and Restrictions These sections describe supervisor engine redund an cy conf igurati ...

  • Cisco Systems 6500 - page 75

    5-5 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 5 Configuring RPR an d RPR+ Supervisor Engine R edundancy Supervisor Engine Redun dancy Guidelines and Restric tions Guidelines • The two Gigabit Ethern et interfaces on the redu ndant supervisor engine are alw ays acti ve. • RPR+ switc ...

  • Cisco Systems 6500 - page 76

    5-6 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 5 Configuring RPR and RPR+ Supe rvisor Engine Redundancy Configuring Supe rvisor Engine Redunda ncy Configuration Mode Restrictions The follo wing configuratio n restrictions appl y during the startup synchronization process: • Y ou canno ...

  • Cisco Systems 6500 - page 77

    5-7 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 5 Configuring RPR an d RPR+ Supervisor Engine R edundancy Configuring Supervisor Engine Redundancy client count = 11 client_notification_TMR = 30000 milliseconds keep_alive TMR = 4000 milliseconds keep_alive count = 0 keep_alive threshold = ...

  • Cisco Systems 6500 - page 78

    5-8 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 5 Configuring RPR and RPR+ Supe rvisor Engine Redundancy Configuring Supe rvisor Engine Redunda ncy Router(config-r-mc)# no auto-sync standard Router(config-r-mc)# auto-sync config-register Router(config-r-mc)# end Router# copy running-conf ...

  • Cisco Systems 6500 - page 79

    5-9 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 5 Configuring RPR an d RPR+ Supervisor Engine R edundancy Performing a Fast Software Upgrade Performing a Fast Software Upgrade The fast softw are upgrade (FSU) procedu re supported by RPR allo ws you to upgrade the Ci sco IOS image on the s ...

  • Cisco Systems 6500 - page 80

    5-10 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 5 Configuring RPR and RPR+ Supe rvisor Engine Redundancy Copying Files to an MSFC This exampl e shows ho w to perform an FSU: Router# config terminal Router(config)# config-register 0x2 Router(config)# boot system flash slot0: c6sup22-jsv- ...

  • Cisco Systems 6500 - page 81

    CH A P T E R 6-1 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 6 Configuring Interfaces This chapter descri bes how to configure interfaces on the Catalyst 6500 series switches. This chapter consists of these sections: • Understanding Interface Conf iguration, page 6-1 • Using the Interface Com ...

  • Cisco Systems 6500 - page 82

    6-2 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 6 Config uring Interfaces Using the Inter face Command • Port number—The physical port number on the modul e. On the Catalyst 6500 series switch, the port numbers always be gin with 1. When facing the rear of the switch, ports are numbe ...

  • Cisco Systems 6500 - page 83

    6-3 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 6 Configuring Interfac es Using the Interface Command 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier 0 output buffer failures, 0 output buffers swapped out Router# Step 4 Enter the show hard ware EXEC command to see a l ...

  • Cisco Systems 6500 - page 84

    6-4 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 6 Config uring Interfaces Configuring a Ra nge of Interfaces Configuring a Range of Interfaces The interface-range co nfigu ration mode allo ws you to configure multip le interfaces with the same configuration parame ters. After yo u enter ...

  • Cisco Systems 6500 - page 85

    6-5 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 6 Configuring Interfac es Configuring a Range of Interfaces • W ith releases earlier than Releas e 12.1(26)E, for VLAN interfaces, the interface range command supports only those VLAN interf aces for whic h Layer 2 VLANs ha ve been created ...

  • Cisco Systems 6500 - page 86

    6-6 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 6 Config uring Interfaces Defining and U sing Interface-Ran ge Macros If you enter mul tiple conf iguration comman ds while you are in interf ace-range conf iguration mode, each command is ex ecuted as it is entered (they are not batched to ...

  • Cisco Systems 6500 - page 87

    6-7 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 6 Configuring Interfac es Configuring Optional Interface Features Configuring Optional Interface Features These sections describe opt ional interf ace features: • Configuring Et hernet Interface Speed and Du plex Mode, page 6-7 • Configu ...

  • Cisco Systems 6500 - page 88

    6-8 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 6 Config uring Interfaces Configuring Optio nal Interface Features Setting the Ethernet Interface Speed Note If you set th e Ethernet port speed to auto on a 10/100-Mbps or 10/100/ 1000-Mbps Ethernet por t, both speed and duplex are autoneg ...

  • Cisco Systems 6500 - page 89

    6-9 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 6 Configuring Interfac es Configuring Optional Interface Features The ports on both ends of a l ink must ha ve the same setting. The link will not come up if the ports at each end of the link are set inconsistently (link ne gotiation enabled ...

  • Cisco Systems 6500 - page 90

    6-10 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 6 Config uring Interfaces Configuring Optio nal Interface Features Last clearing of "show interface" counters never Queueing strategy: fifo Output queue 0/40, 0 drops; input queue 0/75, 0 drops 5 minute input rate 0 bits/sec, 0 p ...

  • Cisco Systems 6500 - page 91

    6-11 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 6 Configuring Interfac es Configuring Optional Interface Features Jumbo Frame Support Overview A jumbo frame is a frame l arger than th e default Ethernet frame si ze. Y ou enable jumbo frame support by conf iguring a larger -than-default m ...

  • Cisco Systems 6500 - page 92

    6-12 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 6 Config uring Interfaces Configuring Optio nal Interface Features Bridged and Routed Traffic Size Check at Egress Gigabit Ethernet and 10 Gigabit Ethernet Ports Jumbo frame support compares egress traff ic size with the globa l egress LAN ...

  • Cisco Systems 6500 - page 93

    6-13 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 6 Configuring Interfac es Configuring Optional Interface Features Release 12.1(13)E and later releases sup port nondef ault MTU sizes between 1,500 and 9,216 by tes for Layer 2 Ethernet ports, conf igured per-port with the mtu command and g ...

  • Cisco Systems 6500 - page 94

    6-14 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 6 Config uring Interfaces Configuring Optio nal Interface Features This exampl e shows ho w to conf igure the MTU size on Gigabit Ethernet port 1/2: Router# configure terminal Router(config)# interface gigabitethernet 1/2 Router(config-if) ...

  • Cisco Systems 6500 - page 95

    6-15 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 6 Configuring Interfac es Configuring Optional Interface Features When config uring flo w control, note the follo wing syntax information: • 10-Gigabit Ethernet ports are permanent ly configur ed to respond to pause frames. • When the c ...

  • Cisco Systems 6500 - page 96

    6-16 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 6 Config uring Interfaces Configuring Optio nal Interface Features T o conf igure the debounce t imer on a port, perform this task: On fiber Gig abit Ethernet ports, you can increase th e port debounce timer v alue in increments of 100 mil ...

  • Cisco Systems 6500 - page 97

    6-17 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 6 Configuring Interfac es Understanding Online In sertion and Removal This exampl e show s how to ad d a description on Fa st Ethernet port 5/5: Router(config)# interface fastethernet 5/5 Router(config-if)# description Channel-group to &quo ...

  • Cisco Systems 6500 - page 98

    6-18 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 6 Config uring Interfaces Monitoring and Main taining Interfaces T o display information abou t the interface, perform th ese tasks: This exampl e shows ho w to display the status of F ast Ethernet port 5/5: Router# show protocols fastethe ...

  • Cisco Systems 6500 - page 99

    6-19 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 6 Configuring Interfac es Monitoring and Maintaining Interfaces Resetting an Interface T o reset an interface, perform this task: This exampl e shows ho w to reset Fast Ether net port 5/5: Router# clear interface fastethernet 5/5 Router# Sh ...

  • Cisco Systems 6500 - page 100

    6-20 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 6 Config uring Interfaces Monitoring and Main taining Interfaces ...

  • Cisco Systems 6500 - page 101

    CH A P T E R 7-1 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 7 Configuring LAN Ports for Layer 2 Switching This chapter describes ho w to use the command-line in terface (CLI) to configure Ethernet, F ast Ethernet, Gigabit Ethernet , and 10-Gigabit Ethern et LAN port s f or Layer 2 switching on t ...

  • Cisco Systems 6500 - page 102

    7-2 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 7 Configuring LAN Ports fo r Layer 2 Switching Understanding Ho w Layer 2 Switching W orks Layer 2 Ethernet Switching Overview Catalyst 6500 series switches su pport simultaneous, parallel conn ections between Layer 2 Et hernet segments. Sw ...

  • Cisco Systems 6500 - page 103

    7-3 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 7 Configuring LAN Ports for Layer 2 Switching Understanding How Laye r 2 Switching Works Trunking Overview Note For information about VLANs, see Chapter 9, “Conf iguring VLANs. ” A trunk is a point-t o-point link between the switch and a ...

  • Cisco Systems 6500 - page 104

    7-4 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 7 Configuring LAN Ports fo r Layer 2 Switching Understanding Ho w Layer 2 Switching W orks Encapsulation Types T able 7-1 lists the Ethern et trunk encapsulation t ypes. The trunking mode, the tr unk encapsulation type, and the hardware cap ...

  • Cisco Systems 6500 - page 105

    7-5 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 7 Configuring LAN Ports for Layer 2 Switching Default Layer 2 LAN Inte rface Configuration Note DTP is a point-to-poi nt protocol. Ho wever , some internetworking de vices might forward DTP frames improperly . T o av oid this problem, ensure ...

  • Cisco Systems 6500 - page 106

    7-6 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 7 Configuring LAN Ports fo r Layer 2 Switching Layer 2 LAN Interface Configura tion Guidelines and Restrictions Layer 2 LAN Interface Configura tion Guidelines and Restrictions When config uring Layer 2 LAN ports, follo w these guidelines a ...

  • Cisco Systems 6500 - page 107

    7-7 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 7 Configuring LAN Ports for Layer 2 Switching Configuring LAN Interfac es for Layer 2 Switching Configuring LAN Interfaces for Layer 2 Switching These sections describe ho w to configure Layer 2 switching on the Catalyst 65 00 series switche ...

  • Cisco Systems 6500 - page 108

    7-8 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 7 Configuring LAN Ports fo r Layer 2 Switching Configuring LAN Interfac es for Layer 2 Switching Configuring a Layer 2 Switching Port as a Trunk These sections describe conf iguring a Layer 2 switching port as a trunk : • Preparing a Laye ...

  • Cisco Systems 6500 - page 109

    7-9 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 7 Configuring LAN Ports for Layer 2 Switching Configuring LAN Interfac es for Layer 2 Switching T o conf igure the Layer 2 switch ing port as an ISL or 802.1Q t runk, perform this task : Note Complete the steps in the “Completing T runk Co ...

  • Cisco Systems 6500 - page 110

    7-10 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 7 Configuring LAN Ports fo r Layer 2 Switching Configuring LAN Interfac es for Layer 2 Switching T o conf igure the Layer 2 trunk not to u se DTP , perform this task: When config uring the Layer 2 trunk not to use DTP , note the followi ng ...

  • Cisco Systems 6500 - page 111

    7-11 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 7 Configuring LAN Ports for Layer 2 Switching Configuring LAN Interfac es for Layer 2 Switching Note Complete the steps in the “Completing T runk Confi guration” section on page 7-13 after performing the tasks in this section. Configuri ...

  • Cisco Systems 6500 - page 112

    7-12 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 7 Configuring LAN Ports fo r Layer 2 Switching Configuring LAN Interfac es for Layer 2 Switching When config uring the list of VLANs al low ed on a trunk, note the follo wing syntax informat ion: • The vlan parameter is either a single V ...

  • Cisco Systems 6500 - page 113

    7-13 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 7 Configuring LAN Ports for Layer 2 Switching Configuring LAN Interfac es for Layer 2 Switching Note Complete the steps in the “Completing T runk Confi guration” section on page 7-13 after performing the tasks in this section. Completin ...

  • Cisco Systems 6500 - page 114

    7-14 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 7 Configuring LAN Ports fo r Layer 2 Switching Configuring LAN Interfac es for Layer 2 Switching Router# show interfaces fastethernet 5/8 switchport Name: Fa5/8 Switchport: Enabled Administrative Mode: dynamic desirable Operational Mode: t ...

  • Cisco Systems 6500 - page 115

    7-15 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 7 Configuring LAN Ports for Layer 2 Switching Configuring LAN Interfac es for Layer 2 Switching This exampl e show s how to configu re the Fast Ethernet port 5/6 as an access port in V LAN 200: Router# configure terminal Enter configuration ...

  • Cisco Systems 6500 - page 116

    7-16 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 7 Configuring LAN Ports fo r Layer 2 Switching Configuring LAN Interfac es for Layer 2 Switching Configuring a Custom IEEE 802.1Q EtherType Field Value W ith Release 12.1(20)E and later releases, you can co nfigure a custom EtherT ype fiel ...

  • Cisco Systems 6500 - page 117

    7-17 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 7 Configuring LAN Ports for Layer 2 Switching Configuring LAN Interfac es for Layer 2 Switching • Y ou cannot conf igure a custom EtherT ype field v alue on the ports in an EtherChannel . • Y ou cannot form an EtherChannel from ports th ...

  • Cisco Systems 6500 - page 118

    7-18 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 7 Configuring LAN Ports fo r Layer 2 Switching Configuring LAN Interfac es for Layer 2 Switching ...

  • Cisco Systems 6500 - page 119

    CH A P T E R 8-1 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 8 Configuring VTP This chapter describes ho w to confi gure the VLAN T runking Protocol (VTP) on the Cataly st 6500 series switches. Note For complete syntax and usage in formation for the co mmands used in this chap ter , refer to the ...

  • Cisco Systems 6500 - page 120

    8-2 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 8 Configu ring VTP Understanding How VT P Works Understanding the VTP Domain A VTP domain (also called a VLAN management doma in) is made up of o ne or more interconnected network de vices that share the same VTP domain n ame. A network de ...

  • Cisco Systems 6500 - page 121

    8-3 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 8 Configuring VTP Understanding How VTP Works The follo wing global configurat ion inf ormation is distrib u ted in VTP adver tisements: • VLAN IDs (ISL and 802.1Q) • Emulated LAN names (for A TM LANE) • 802.10 SAID values (FDDI) • V ...

  • Cisco Systems 6500 - page 122

    8-4 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 8 Configu ring VTP Understanding How VT P Works Figure 8-1 sho ws a switched network wi thout VTP pruning enabled. In terface 1 on network Switch 1 and port 2 on Switch 4 are assigned to th e Red VLAN. A broadcast is sent from the host conn ...

  • Cisco Systems 6500 - page 123

    8-5 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 8 Configuring VTP VTP Default Config uration Enabling VTP pruning o n a VTP server enable s pruning for the enti re management domain. VTP p runing takes ef fect sev eral seconds after you enable it. By default, VLANs 2 through 1000 are prun ...

  • Cisco Systems 6500 - page 124

    8-6 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 8 Configu ring VTP Configuring VTP • When you enable or disable VTP pruning on a VTP server , VTP pruning for the entir e management domain is enabled o r disabled. • The pruning-eligib ility configuration applies globally to all trunks ...

  • Cisco Systems 6500 - page 125

    8-7 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 8 Configuring VTP Configuring VTP This exampl e shows one w ay to configure a VTP pa sswor d with Release 12.1(13)E and later releases: Router# configure terminal Router(config)# vtp password WATER Setting device VLAN database password to WA ...

  • Cisco Systems 6500 - page 126

    8-8 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 8 Configu ring VTP Configuring VTP Note In a T oken Ring en vironment, you must enable VTP v ersion 2 for T oken Ring VLAN switching to function properly on de vices that support T oken Ring interfaces . T o enable VTP versio n 2, perform t ...

  • Cisco Systems 6500 - page 127

    8-9 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 8 Configuring VTP Configuring VTP Note When VTP is disabled, you can enter VLAN conf iguration commands in conf iguration mode instead of the VLAN database mode and the VLAN configuratio n is stored in the startup conf iguration f ile. This ...

  • Cisco Systems 6500 - page 128

    8-10 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 8 Configu ring VTP Configuring VTP This exampl e shows ho w to verify the conf iguration: Router# show vtp status VTP Version : 2 Configuration Revision : 247 Maximum VLANs supported locally : 1005 Number of existing VLANs : 33 VTP Operati ...

  • Cisco Systems 6500 - page 129

    CH A P T E R 9-1 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 9 Configuring VLANs This chapter describe s how to configure VLANs on the Catalyst 6 500 series switch es. Note For complete syntax and usage in formation for the co mmands used in this chap ter , refer to the Catalyst 6500 Series Switc ...

  • Cisco Systems 6500 - page 130

    9-2 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 9 Configuring VLANs Understanding How VLA Ns Work VLAN Ranges Note Y ou must enable the extended system ID to use 4096 VLANs (see the “Underst anding the Bri dge ID” section on page 15-3 ). W ith Release 12.1(13)E and later releases, Ca ...

  • Cisco Systems 6500 - page 131

    9-3 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 9 Configuring VLANs Understanding How VLAN s Work Configurable VLAN Parameters Note • Ethernet VL AN 1 uses on ly default values. • Except for the VLAN name, Ethernet VLANs 1006 thro ugh 4094 use only def ault v alues. • W ith Release ...

  • Cisco Systems 6500 - page 132

    9-4 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 9 Configuring VLANs Understanding How VLA Ns Work Figure 9-1 Interconnected T ok en Ring T rBRF and T rCRF VLAN s For source routing, the Catalyst 6500 series switch ap pears as a single bridge between th e logical rings. The T rBR F can fu ...

  • Cisco Systems 6500 - page 133

    9-5 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 9 Configuring VLANs Understanding How VLAN s Work Figur e 9-2 Undistr ibuted T rCRFs By default, T oken Ring ports are associated with the default T rCRF (VLAN 10 03, trcrf-default), which has the default T rBRF (VLAN 1005, trbrf-def ault) a ...

  • Cisco Systems 6500 - page 134

    9-6 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 9 Configuring VLANs VLAN Default Configuration Figur e 9-4 Backup T rCRF VLAN Default Configuration Ta b l e s 9-2 through 9-6 sho w the default conf igurations for the dif ferent VLAN media types. T rCRF 600 T rBRF 1 ISL S6811 Switch A Swi ...

  • Cisco Systems 6500 - page 135

    9-7 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 9 Configuring VLANs VLAN Default Co nfiguration T ranslational bridge 2 0 0–1005 VLAN state acti ve acti ve, suspend T able 9-4 T ok en Ring (T rCRF) VLAN Def aults and Rang es Parameter Default Range VLAN ID 1003 1–1005 VLAN name “tok ...

  • Cisco Systems 6500 - page 136

    9-8 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 9 Configuring VLANs VLAN Configuration Gu idelines and Restrictions VLAN Configuration Guidelines and Restrictions Follo w these guidelines and restrictions wh en creating and modify ing VLANs in your netw ork: Restrictions • Supervisor e ...

  • Cisco Systems 6500 - page 137

    9-9 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 9 Configuring VLANs Configuri ng VLANs • When a Catalyst 6500 series switch is conf igur ed as a VTP server , you can configure FDDI and T oken Ring VLANs from the switch. • Y ou mu st configure a T rBRF before yo u configure the TrCRF ( ...

  • Cisco Systems 6500 - page 138

    9-10 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 9 Configuring VLANs Configuring VLANs • Y ou can configure extended-rang e VLANs onl y in global c onfiguration mode. Y o u cannot co nfigure extended -range VLANs in VLAN database mode. VLAN Configuration in VLAN Database Mode Note Y ou ...

  • Cisco Systems 6500 - page 139

    9-11 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 9 Configuring VLANs Configuri ng VLANs When you create or modify an Ethernet VLAN, note the follo wing syntax information: • Releases 12.1(11b)E and later support VLAN conf iguration in global conf iguration mode. • Releases 12.1(13)E a ...

  • Cisco Systems 6500 - page 140

    9-12 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 9 Configuring VLANs Configuring VLANs Assigning a Layer 2 LAN Interface to a VLAN A VLAN created in a management domain remains unused until you assign one o r more LAN ports to the VLAN. Note Make sure you assig n LAN ports to a VLAN of t ...

  • Cisco Systems 6500 - page 141

    9-13 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 9 Configuring VLANs Configuri ng VLANs 802.1Q VLANs in the range 1 th rough 1001 and 1006 th rough 4094 are automatical ly mapped to the corresponding IS L VLAN. 802.1Q VLA N numbers corresponding to reserved V LAN numbers must be mapped to ...

  • Cisco Systems 6500 - page 142

    9-14 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 9 Configuring VLANs Configuring VLANs ...

  • Cisco Systems 6500 - page 143

    CH A P T E R 10-1 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 10 Configuring Private VLANs This chapter descri bes how to configure pri vate VLANs on t he Catalyst 65 00 series switc hes. Release 12.1 E supports pri vate VLANs with Release 12.1( 11b)E and later . Note For complete syntax and usag ...

  • Cisco Systems 6500 - page 144

    10-2 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 10 Configuring Priva te VLANs Private VLAN Configuration Restrictions and Guidelines Pri vate VLAN ports are associated w ith a set of supporting VLANs th at are used to create the pri vate VLAN structure. A p riv ate VLAN uses VLANs three ...

  • Cisco Systems 6500 - page 145

    10-3 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 10 Configuring Private VLANs Private VLAN Configuration Restrictions and Guide lines • Do not configure pr iv ate VLAN ports as EtherChannels. While a port is part of the pri vate VLAN config uration, an y EtherChannel conf iguration for ...

  • Cisco Systems 6500 - page 146

    10-4 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 10 Configuring Priva te VLANs Private VLAN Configuration Restrictions and Guidelines • VTP does not support pri vate VLANs. Y ou must configu re pri vate VLANs on each d evice where you want pri vat e VLAN ports. • T o maintain the sec ...

  • Cisco Systems 6500 - page 147

    10-5 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 10 Configuring Private VLANs Configuring Private VLANs • Because the priv ate VLAN port sticky ARP en tries do not age out, you must manual ly remov e priv ate VLAN port ARP entries if a MAC address changes. Y ou can add or remove pri vat ...

  • Cisco Systems 6500 - page 148

    10-6 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 10 Configuring Priva te VLANs Configuring Private VLANs Primary Secondary Type Interfaces ------- --------- ----------------- ------------------------------------------ 202 primary This exampl e show s how to configu re VLAN 303 as a commu ...

  • Cisco Systems 6500 - page 149

    10-7 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 10 Configuring Private VLANs Configuring Private VLANs • Use the re move keyword with a secondary_vlan_list to clear the association between secondary VLANs and a primary V LAN. • The command does not take ef fect until you exit VLAN co ...

  • Cisco Systems 6500 - page 150

    10-8 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 10 Configuring Priva te VLANs Configuring Private VLANs • Enter a secondary_vlan_list parameter or use th e add keyword with a secondar y_vlan_lis t parameter to map the secondary VLANs to the primary VLAN. • Use the re move keyword wi ...

  • Cisco Systems 6500 - page 151

    10-9 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 10 Configuring Private VLANs Configuring Private VLANs This example sho ws ho w to configure interface F a stEthe rnet 5/1 as a priv ate VLAN host port and verify the conf iguration: Router# configure terminal Router(config)# interface fast ...

  • Cisco Systems 6500 - page 152

    10-10 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 10 Configuring Priva te VLANs Configuring Private VLANs When you configure a Layer 2 interface as a priv at e VLAN promiscuous port, note the follo wing syntax inform ation: • The secondary_vlan_list param eter cannot c ontain spac es. ...

  • Cisco Systems 6500 - page 153

    CH A P T E R 11-1 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 11 Configuring Cisco IP Phone Support This chapter describe s how to configure support fo r Cisco IP Phones on the Catalyst 650 0 series switches. Release 12.1(13)E and late r releases support Ci sco IP Phones. Note For complete syntax ...

  • Cisco Systems 6500 - page 154

    11-2 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 11 Configur ing Cisco IP Phone Support Understanding Cisco IP Phone Support Figur e 1 1 -1 Cisco IP Phone Connect ed to a S witch Cisco IP Phone Voice Traffic The Cisco IP Phon e transmits voice traffic with La yer 3 IP precedence an d Lay ...

  • Cisco Systems 6500 - page 155

    11-3 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 11 Configuring Cisco IP Phone Support Understanding Cisco IP Phone Suppo rt Cisco IP Phone Data Traffic Note Untagged traff ic from the de vice attached to the Ci sco IP Phone passes through the Cisco IP Phone unchanged, regardless of the t ...

  • Cisco Systems 6500 - page 156

    11-4 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 11 Configur ing Cisco IP Phone Support Default Cisco IP Phone Support Configuration When a switching module p ort detects an unpo wered Cisco IP Phone, the switching module reports to the supervisor eng ine that an unpo wered Cisco IP Ph o ...

  • Cisco Systems 6500 - page 157

    11-5 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 11 Configuring Cisco IP Phone Support Configuring Cisco IP Phone Su pport • Y ou cannot conf igure 10/100 Mbps po rts with QoS port architectu re 1p4t/2q2t to trust recei ved Layer 2 CoS v alues. Config ure policies to trust the Layer 3 I ...

  • Cisco Systems 6500 - page 158

    11-6 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 11 Configur ing Cisco IP Phone Support Configuring Cisco IP Phone Su pport When confi guring the w ay in which the Cisco IP Phone transmits voice traf fic, note the follo wing syntax inform ation: • Enter a voice VLAN ID to send CDPv2 pa ...

  • Cisco Systems 6500 - page 159

    11-7 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 11 Configuring Cisco IP Phone Support Configuring Cisco IP Phone Su pport Configuring Data Traffic Support T o conf igure the way i n which the Cisco IP Phone transm its data traf fic, perfor m this task: When conf iguring the w ay in which ...

  • Cisco Systems 6500 - page 160

    11-8 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 11 Configur ing Cisco IP Phone Support Configuring Cisco IP Phone Su pport Configuring Inline Power Support T o conf igure inline po wer support, perform this task: When config uring inline po wer support, note the follo wing syntax inform ...

  • Cisco Systems 6500 - page 161

    CH A P T E R 12-1 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 12 Configuring Layer 3 Interfaces This chapter contains information abou t ho w to config ure Layer 3 interfaces on the Catalyst 6500 series switches, which supplements the infor mation and pr ocedur es in the Release 12.1 publicat ion ...

  • Cisco Systems 6500 - page 162

    12-2 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 12 Configuring Layer 3 Interfaces Configuring IP Routing and Addresses Note • For complete syntax and usage in formation for t he commands used in this chapter, refer to the Catalyst 6500 Series Switc h Cisco IOS Comma nd Refer ence publ ...

  • Cisco Systems 6500 - page 163

    12-3 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 12 Con figuring Layer 3 Interfaces Configuring IP Routing and Addre sses The Multilayer Switch Feature Ca rd 2 (MSFC2) pr o vides processing in software for route-map sequences that use the match length and set interface ke ywords. T o conf ...

  • Cisco Systems 6500 - page 164

    12-4 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 12 Configuring Layer 3 Interfaces Configuring IP Routing and Addresses Router# show interfaces fastethernet 5/4 FastEthernet5/4 is up, line protocol is up Hardware is Cat6K 100Mb Ethernet, address is 0050.f0ac.3058 (bia 0050.f0ac.3058) Int ...

  • Cisco Systems 6500 - page 165

    12-5 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 12 Con figuring Layer 3 Interfaces Configuring IP Routing and Addre sses WCCP Redirect exclude is disabled BGP Policy Mapping is disabled IP multicast multilayer switching is disabled IP mls switching is enabled Router# This example uses th ...

  • Cisco Systems 6500 - page 166

    12-6 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 12 Configuring Layer 3 Interfaces Configuring IPX Routing and Networ k Numbers Configuring IPX Routing and Network Numbers For complete in formation and procedur es, refer to these publication s: • Cisco IOS AppleT alk and No vell IPX Co ...

  • Cisco Systems 6500 - page 167

    12-7 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 12 Con figuring Layer 3 Interfaces Configuring AppleTalk Routing, Cab le Ranges, and Zones Configuring AppleTalk Routing, Cable Ranges, and Zones For complete in formation and procedur es, refer to these publication s: • Cisco IOS AppleT ...

  • Cisco Systems 6500 - page 168

    12-8 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 12 Configuring Layer 3 Interfaces Configuring Oth er Protocols on Layer 3 Interfaces Configuring Other Protocols on Layer 3 Interfaces Refer to these publicatio ns for information about conf iguring other protocols on Layer 3 i nterfaces: ...

  • Cisco Systems 6500 - page 169

    CH A P T E R 13-1 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 13 Configuring EtherChannels This chapter describes ho w to configure Et herChannels on the Catalyst 6500 seri es switch Layer 2 or Layer 3 LAN ports. Note • For complete syntax and usage in formation for t he commands used in this c ...

  • Cisco Systems 6500 - page 170

    13-2 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 13 Config uring EtherChannels Understanding How Ethe rChannels Work EtherChannel Feature Overview An EtherChannel b undles indi vidual Ethernet links into a single logi cal link that pro vides the aggreg ate bandwidth o f up to eight physi ...

  • Cisco Systems 6500 - page 171

    13-3 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 13 Configuring EtherChannels Understanding How EtherCh annels Work Understanding Manual EtherCh annel Configuration Manually conf igured EtherChannel ports do not e xch ange EtherChannel prot ocol packets. A manually confi gured EtherChanne ...

  • Cisco Systems 6500 - page 172

    13-4 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 13 Config uring EtherChannels Understanding How Ethe rChannels Work The protocol learn s the capabilities of LAN port groups dynamical ly and informs the other LAN ports. Once LA CP identifies correctly matched Ethernet l i nks, it facilit ...

  • Cisco Systems 6500 - page 173

    13-5 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 13 Configuring EtherChannels EtherChannel Feature Configura tion Guidelines and Restrictions Understanding Port Channel Interfaces Each EtherChannel has a numbered po rt channel interf ace. Release 12.1 (5)E and later releases support a max ...

  • Cisco Systems 6500 - page 174

    13-6 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 13 Config uring EtherChannels Configuring EtherCh annels • Enable all LAN ports in an EtherChann el. If you sh ut do wn a LAN port in an EtherChannel, it is treated as a link f ailure and its traf fic is transferred to one of t he remain ...

  • Cisco Systems 6500 - page 175

    13-7 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 13 Configuring EtherChannels Configuring EtherChannels Configuring Port Channel Logical Interfaces for Layer 3 EtherChannels Note • When confi guring Layer 2 EtherChannels, you canno t put Layer 2 LAN ports into manually created port chan ...

  • Cisco Systems 6500 - page 176

    13-8 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 13 Config uring EtherChannels Configuring EtherCh annels Configuring Channel Groups Note • When config uring Layer 3 EtherChannels, you must man ually create the port channel logical interface f irst (see the “Configuring Port Channel ...

  • Cisco Systems 6500 - page 177

    13-9 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 13 Configuring EtherChannels Configuring EtherChannels Note See the “Configuring a Range of Interfaces” section on page 6-4 for information about the ra nge keyword. This exampl e shows ho w to verify the conf iguration of port channel ...

  • Cisco Systems 6500 - page 178

    13-10 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 13 Config uring EtherChannels Configuring EtherCh annels This example sh ows ho w to verify the conf iguration of port channel interface 2 after the LAN ports ha ve been configured: Router# show etherchannel 12 port-channel Port-channels ...

  • Cisco Systems 6500 - page 179

    13-11 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 13 Configuring EtherChannels Configuring EtherChannels Configuring EtherChannel Load Balancing T o conf igure EtherChannel load balancing, perform this task: The load-balanci ng ke ywords indicate th e follo wing information: • W ith a P ...

  • Cisco Systems 6500 - page 180

    13-12 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 13 Config uring EtherChannels Configuring EtherCh annels ...

  • Cisco Systems 6500 - page 181

    CH A P T E R 14-1 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 14 Configuring IEEE 802.1Q Tunneling and Layer 2 Protocol Tunneling W ith Release 12.1(13)E and later, the Catalyst 6500 series switches support IEEE 802.1Q tunneling and Layer 2 protocol tunneling. This chapte r describes ho w to conf ...

  • Cisco Systems 6500 - page 182

    14-2 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 14 Configuring IEE E 802.1Q Tunneling and Layer 2 Protocol T unneling Understanding How 802.1Q Tunn eling Works The customer switches are trunk connected, but with 802.1Q tunneling, t he se rvice provider switches only use one service pro ...

  • Cisco Systems 6500 - page 183

    14-3 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 14 Configuring IEEE 802.1Q Tunneling and Layer 2 Protocol Tunneling Understanding How 802. 1Q Tunneling Works Figur e 14-2 Untagg ed, 802.1Q-T agg e d, and Double-T agged Ether net Fr am es When a tunnel port recei ves tagged customer traf ...

  • Cisco Systems 6500 - page 184

    14-4 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 14 Configuring IEE E 802.1Q Tunneling and Layer 2 Protocol T unneling 802.1Q Tunneling Configuration Guideline s and Restrictio ns 802.1Q Tunneling Configuration Guidelines and Restrictions Follo w these guidelines and restrictions wh en c ...

  • Cisco Systems 6500 - page 185

    14-5 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 14 Configuring IEEE 802.1Q Tunneling and Layer 2 Protocol Tunneling Configuring 802.1Q Tunneling • T runks require no special conf iguration to carry tunnel VLANs. • W e recommend that you use ISL trunks to carry tu nnel traff ic betwee ...

  • Cisco Systems 6500 - page 186

    14-6 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 14 Configuring IEE E 802.1Q Tunneling and Layer 2 Protocol T unneling Configuring 802.1Q Tunneling Preconfiguration Tasks Before you can conf igure Layer 2 protocol tunneling, you must perform th ese tasks: Step 1 On all the service provid ...

  • Cisco Systems 6500 - page 187

    14-7 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 14 Configuring IEEE 802.1Q Tunneling and Layer 2 Protocol Tunneling Understanding How Layer 2 Protoc ol Tunneling Works This example shows ho w to configure tunneling on port 4/1 and verify the configuration: Router# configure terminal Rout ...

  • Cisco Systems 6500 - page 188

    14-8 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 14 Configuring IEE E 802.1Q Tunneling and Layer 2 Protocol T unneling Configuring Supp ort for Layer 2 Protoc ol Tunneling topology on switches 1, 2, and 3 without considering con ver gence parameters based on switches 4 and 5. T o provide ...

  • Cisco Systems 6500 - page 189

    14-9 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 14 Configuring IEEE 802.1Q Tunneling and Layer 2 Protocol Tunneling Configuring Support for La yer 2 Protocol Tunneling T o conf igure Layer 2 proto col tunneling on a p ort, perform this task: When you conf igure a Layer 2 port as a Layer ...

  • Cisco Systems 6500 - page 190

    14-10 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 14 Configuring IEE E 802.1Q Tunneling and Layer 2 Protocol T unneling Configuring Supp ort for Layer 2 Protoc ol Tunneling This exampl e show s how to conf igure Layer 2 protocol t unneling and shutdo wn thresholds on port 5/1 for CDP , S ...

  • Cisco Systems 6500 - page 191

    CH A P T E R 15-1 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 15 Configuring STP and IEEE 802.1s MST This chapter describes ho w to configure the Spanning T ree Protocol (STP) and the IEEE 802.1s Multiple Spanning T ree (MST) protocol on Catalyst 6500 series switches. Note For complete syntax and ...

  • Cisco Systems 6500 - page 192

    15-2 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 15 Configuring STP and IEEE 802.1s MST Understanding How ST P Works Understanding How STP Works These sections describe ho w STP works: • STP Overview , page 15-2 • Understanding the Bridge ID, page 15-3 • Understanding Bridge Protoc ...

  • Cisco Systems 6500 - page 193

    15-3 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 15 Config uring STP and IEEE 802.1s MST Understanding How STP Works Understanding the Bridge ID Each VLAN on each netwo rk de vice has a unique 64-bit bridge ID consi sting of a bridge priority v alue, an extended system ID, and an STP MA C ...

  • Cisco Systems 6500 - page 194

    15-4 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 15 Configuring STP and IEEE 802.1s MST Understanding How ST P Works If you ha ve a n etwork de vice in your network wi th MA C address reduction enabled, you should also enable MA C address reduction on all other Layer- 2 co nnected networ ...

  • Cisco Systems 6500 - page 195

    15-5 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 15 Config uring STP and IEEE 802.1s MST Understanding How STP Works The STP root bridge is the l ogical center of the spanning tree topology i n a Layer 2 network. All path s that are not needed to reach the root brid ge from anywhere in th ...

  • Cisco Systems 6500 - page 196

    15-6 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 15 Configuring STP and IEEE 802.1s MST Understanding How ST P Works For e xample, assume that one port on Switch B is a fiber -optic link, and another port on Switch B (an unshielded twisted-pair [UTP] link ) is the root port. Netw ork tra ...

  • Cisco Systems 6500 - page 197

    15-7 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 15 Config uring STP and IEEE 802.1s MST Understanding How STP Works Figure 15-2 S TP Lay er 2 LAN Interf ace States When you enable STP , e very port in the Catalyst 6500 series switch, VLAN, and networ k goes through the blocking state and ...

  • Cisco Systems 6500 - page 198

    15-8 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 15 Configuring STP and IEEE 802.1s MST Understanding How ST P Works Blocking State A Layer 2 LAN port in the blocking state does no t participate in frame forwarding, as sho wn in Figure 15-3 . Aft er initialization, a BPDU is sent out to ...

  • Cisco Systems 6500 - page 199

    15-9 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 15 Config uring STP and IEEE 802.1s MST Understanding How STP Works Listening State The listening state is the first tran sitional state a Layer 2 LAN port ente rs after the blocking state. The Layer 2 LAN port enters this state when STP de ...

  • Cisco Systems 6500 - page 200

    15-10 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 15 Configuring STP and IEEE 802.1s MST Understanding How ST P Works Learning State A Layer 2 LAN port in the lear ning state prep ares to partic ipate in fram e forwardi ng. The Layer 2 LAN port enters the learning st ate from the listeni ...

  • Cisco Systems 6500 - page 201

    15-11 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 15 Config uring STP and IEEE 802.1s MST Understanding How STP Works Forwarding State A Layer 2 LAN port in the forwarding state forwards frames, as sho wn in Figure 15-6 . The Layer 2 LAN port enters the forwarding st ate from the learning ...

  • Cisco Systems 6500 - page 202

    15-12 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 15 Configuring STP and IEEE 802.1s MST Understanding How ST P Works Disabled State A Layer 2 LAN po rt in the disabled sta te does not partic ipate in frame forwarding o r STP , as shown in Figure 15-7 . A Layer 2 LA N port in the disable ...

  • Cisco Systems 6500 - page 203

    15-13 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 15 Config uring STP and IEEE 802.1s MST Understanding How IEEE 802.1w RSTP Work s Understanding How IEEE 802.1w RSTP Works Note In Cisco IOS release 12.1(11)EX and later re leases, RS TP is implemented as part of Multiple Spann ing T ree P ...

  • Cisco Systems 6500 - page 204

    15-14 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 15 Configuring STP and IEEE 802.1s MST Understanding How IEEE 802.1s MST Works • Backup —A backup for th e path provid ed by a designated port tow ard the leav es of the spanning tree. Backup ports can exist only where two ports are c ...

  • Cisco Systems 6500 - page 205

    15-15 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 15 Config uring STP and IEEE 802.1s MST Understanding How IE EE 802.1s MST Works These sections describe Multiple Spanning Tree (MST): • IEEE 802.1s MST Overvie w , page 15-15 • MST -to-PVST Interoperabilit y , page 15-16 • Common Sp ...

  • Cisco Systems 6500 - page 206

    15-16 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 15 Configuring STP and IEEE 802.1s MST Understanding How IEEE 802.1s MST Works • MST establishes and maintains addition al spanning trees within each MST re gion. These spanning trees are referred to as MST instances (MSTIs ). The IST i ...

  • Cisco Systems 6500 - page 207

    15-17 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 15 Config uring STP and IEEE 802.1s MST Understanding How IE EE 802.1s MST Works An MST regi on appears as an SST or pseudobridge t o STP running in the SST regi on. Pseudobridges operate as follows: • The same values for root identif ie ...

  • Cisco Systems 6500 - page 208

    15-18 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 15 Configuring STP and IEEE 802.1s MST Understanding How IEEE 802.1s MST Works When you connect a PVST+ switch to two dif ferent MST regions, the topology change from the PVST+ switch does not pass be yond the f i rst MST re gion. In this ...

  • Cisco Systems 6500 - page 209

    15-19 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 15 Config uring STP and IEEE 802.1s MST Understanding How IE EE 802.1s MST Works MST Regions These sections describe MST re gions: • MST Region Overview , page 15-19 • Boundary Ports, page 15-19 • IST Master , page 15-19 • Edge Por ...

  • Cisco Systems 6500 - page 210

    15-20 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 15 Configuring STP and IEEE 802.1s MST Understanding How IEEE 802.1s MST Works If two or mor e bridges at the boun dary of a reg ion hav e an identical path to the r oot, you can set a sligh tly lo wer bridge priority to mak e a specific ...

  • Cisco Systems 6500 - page 211

    15-21 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 15 Config uring STP and IEEE 802.1s MST Default STP Co nfiguration Default STP Configuration T able 15-5 sho ws the default STP con figur ation. STP and MST Configuration Guidelines Follo w these guidelines wh en configuring MST : • Do n ...

  • Cisco Systems 6500 - page 212

    15-22 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 15 Configuring STP and IEEE 802.1s MST Configuring STP • Ensure that trunks carry all of the VLANs mapped to an instance or do not carry any VLANs at all for this instance. • Do not connect switche s with access links because access l ...

  • Cisco Systems 6500 - page 213

    15-23 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 15 Config uring STP and IEEE 802.1s MST Configuring STP Enabling STP Note STP is enabled by def ault on VLAN 1 and on al l new ly created VLANs. Y ou can enab le STP on a per -VLAN basis. The Cataly st 6500 series switch maintains a separa ...

  • Cisco Systems 6500 - page 214

    15-24 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 15 Configuring STP and IEEE 802.1s MST Configuring STP This exampl e shows ho w to verify the conf iguration: Router# show spanning-tree vlan 200 VLAN0200 Spanning tree enabled protocol ieee Root ID Priority 32768 Address 00d0.00b8.14c8 T ...

  • Cisco Systems 6500 - page 215

    15-25 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 15 Config uring STP and IEEE 802.1s MST Configuring STP This e xample sho ws how to en able the e xtended syste m ID: Router# configure terminal Router(config)# spanning-tree extend system-id Router(config)# end Router# This exampl e shows ...

  • Cisco Systems 6500 - page 216

    15-26 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 15 Configuring STP and IEEE 802.1s MST Configuring STP Use the diameter keyw ord to specify the Layer 2 netw ork diameter (that is, the maximum n umber of bridge hops between an y two end stations in the Layer 2 netw ork). When you specif ...

  • Cisco Systems 6500 - page 217

    15-27 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 15 Config uring STP and IEEE 802.1s MST Configuring STP T o configure a Catalyst 6500 series switch as the secondar y root bridge, perform this task: This exampl e shows ho w to conf igure the Catalyst 6500 series switch as the secondary r ...

  • Cisco Systems 6500 - page 218

    15-28 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 15 Configuring STP and IEEE 802.1s MST Configuring STP This example shows ho w to configure the STP port priority of Fast Ethernet port 4/ 4: Router# configure terminal Router(config)# interface fastethernet 4/4 Router(config-if)# spannin ...

  • Cisco Systems 6500 - page 219

    15-29 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 15 Config uring STP and IEEE 802.1s MST Configuring STP Y ou also can display span ning tree informat ion for VLAN 200 using t he follo wing command: Router# show spanning-tree vlan 200 interface fastEthernet 4/4 Interface Role Sts Cost Pr ...

  • Cisco Systems 6500 - page 220

    15-30 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 15 Configuring STP and IEEE 802.1s MST Configuring STP VLAN0006 Back BLK 1000 160.196 P2p VLAN0007 Back BLK 1000 160.196 P2p VLAN0008 Back BLK 1000 160.196 P2p VLAN0009 Back BLK 1000 160.196 P2p VLAN0010 Back BLK 1000 160.196 P2p Router# ...

  • Cisco Systems 6500 - page 221

    15-31 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 15 Config uring STP and IEEE 802.1s MST Configuring STP T o conf igure the STP bridge priority of a VLAN when the e xtended system ID is disabled, perform this task: T o confi gure the STP bridge priority of a VLAN when the extended system ...

  • Cisco Systems 6500 - page 222

    15-32 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 15 Configuring STP and IEEE 802.1s MST Configuring STP Configuring the Hello Time Note Be careful when using this command. F or most situations, we reco mmend that you use the spanning-tr ee vlan vlan_ID root primary and spanning-tree vla ...

  • Cisco Systems 6500 - page 223

    15-33 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 15 Config uring STP and IEEE 802.1s MST Configuring STP This exampl e show s how to configu re the forward delay ti me for VLAN 200 to 21 seconds: Router# configure terminal Router(config)# spanning-tree vlan 200 forward-time 21 Router(con ...

  • Cisco Systems 6500 - page 224

    15-34 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 15 Configuring STP and IEEE 802.1s MST Configuring IEEE 802.1s MST Specifying the Link Type Rapid conne ctivity is established only on point-to -point links. Span ning tree views a point -to-point lin k as a segment co nnecting only two s ...

  • Cisco Systems 6500 - page 225

    15-35 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 15 Config uring STP and IEEE 802.1s MST Configuring IEEE 802.1s MST These examples sho w how to enable MST : Router# show spanning-tree mst configuration % Switch is not in mst mode Name [] Revision 0 Instance Vlans mapped -------- ------- ...

  • Cisco Systems 6500 - page 226

    15-36 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 15 Configuring STP and IEEE 802.1s MST Configuring IEEE 802.1s MST Router(config-mst)# instance 1 vlan 2000-3000 Router(config-mst)# show pending Pending MST configuration Name [cisco] Revision 2 Instance Vlans mapped -------- ----------- ...

  • Cisco Systems 6500 - page 227

    15-37 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 15 Config uring STP and IEEE 802.1s MST Configuring IEEE 802.1s MST Router# show spanning-tree mst ###### MST00 vlans mapped: 11-4094 Bridge address 00d0.00b8.1400 priority 32768 (32768 sysid 0) Root address 00d0.004a.3c1c priority 32768 ( ...

  • Cisco Systems 6500 - page 228

    15-38 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 15 Configuring STP and IEEE 802.1s MST Configuring IEEE 802.1s MST Router# show spanning-tree mst 1 detail ###### MST01 vlans mapped: 1-10 Bridge address 00d0.00b8.1400 priority 32769 (32768 sysid 1) Root this switch for MST01 FastEtherne ...

  • Cisco Systems 6500 - page 229

    15-39 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 15 Config uring STP and IEEE 802.1s MST Configuring IEEE 802.1s MST Configuring MST Instance Parameters T o conf igure MST instance parameters, perform these tasks: This example sho ws how to conf igure MST instance parame ters: Router(con ...

  • Cisco Systems 6500 - page 230

    15-40 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 15 Configuring STP and IEEE 802.1s MST Configuring IEEE 802.1s MST Configuring MST Instance Port Parameters T o conf igure MST instance port parameters, perform these t asks: This example sh ows ho w to configure MST i nstance port parame ...

  • Cisco Systems 6500 - page 231

    15-41 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 15 Config uring STP and IEEE 802.1s MST Configuring IEEE 802.1s MST T o restart the protocol migration pr ocess (force th e reneg otiation with neighboring switches) on the entire switch, you can use the clear spanning-tree detected-pr oto ...

  • Cisco Systems 6500 - page 232

    15-42 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 15 Configuring STP and IEEE 802.1s MST Configuring IEEE 802.1s MST ...

  • Cisco Systems 6500 - page 233

    CH A P T E R 16-1 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 16 Configuring Optional STP Features This chapter describe s how to configure optional STP features. Note For complete syntax and usage in formation for the co mmands used in this chap ter , refer to the Catalyst 6500 Series Switc h Ci ...

  • Cisco Systems 6500 - page 234

    16-2 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 16 Configuring Optional STP Features Understanding How Po rtFast Works Understanding How PortFast Works STP PortFast causes a Layer 2 LAN interface configured as an access port to enter the forw arding state immediately , bypassing the lis ...

  • Cisco Systems 6500 - page 235

    16-3 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 16 Configuring Optional STP Features Understanding How Uplin kFast Works When you enable PortFast BPDU f iltering globally and set the p ort conf iguration as the defa ult for PortFast BPDU f iltering (see the “Enabling PortF ast BPDU Fil ...

  • Cisco Systems 6500 - page 236

    16-4 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 16 Configuring Optional STP Features Understanding How Ba ckboneFast Works If Switch C detect s a link failur e on the currently acti ve link L2 on the root port (a dir ect li nk failure), UplinkF ast unblocks the blocke d port on Switch C ...

  • Cisco Systems 6500 - page 237

    16-5 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 16 Configuring Optional STP Features Understanding How BackboneFast Works Figure 16-3 Bac kboneF ast Example Before Indirect Link F a ilure If link L1 fa ils, Switch C cannot detect thi s failure because it is not co nnected directly to lin ...

  • Cisco Systems 6500 - page 238

    16-6 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 16 Configuring Optional STP Features Understanding How Ethe rChannel Guard Works Figur e 16-5 Adding a Netw or k D evi ce in a Sh ared-Medium T opology Understanding How EtherChannel Guard Works EtherChann el guard detect s a misconfigured ...

  • Cisco Systems 6500 - page 239

    16-7 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 16 Configuring Optional STP Features Understanding How Loop Guard Works If you enable loop guard on a channel and the first link be comes unidirectional, loop gu ard blocks the entire channel until the af fected po rt is removed from the c ...

  • Cisco Systems 6500 - page 240

    16-8 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 16 Configuring Optional STP Features Enabling PortFast – If a channel is block ed by loo p guard and the channel breaks, spanning tree loses all the state information. The i ndi vidual physical por ts may obtain the forw arding state wit ...

  • Cisco Systems 6500 - page 241

    16-9 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 16 Configuring Optional STP Features Enabling PortFast T o enable the defa ult PortFast configu ration, perform this task: This exampl e show s how to en able the defaul t PortFast co nfigu ration: Router# configure terminal Enter configura ...

  • Cisco Systems 6500 - page 242

    16-10 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 16 Configuring Optional STP Features Enabling PortFast BPDU Filtering Router# show spanning-tree interface fastEthernet 4/4 detail Port 196 (FastEthernet4/4) of VLAN0010 is forwarding Port path cost 1000, Port priority 160, Port Identifie ...

  • Cisco Systems 6500 - page 243

    16-11 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 16 Configuring Optional STP Features Enabling BPDU Guard T o enable PortF ast BPDU fi ltering on a nontrun king port, perform thi s task: This exampl e show s how to enable PortFa st BPDU filteri ng on a nontrunking po rt: Router(config)# ...

  • Cisco Systems 6500 - page 244

    16-12 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 16 Configuring Optional STP Features Enabling UplinkFast This exampl e shows ho w to verify the conf iguration: Router# show spanning-tree summary totals default Root bridge for:VLAN0010 EtherChannel misconfiguration guard is enabled Exte ...

  • Cisco Systems 6500 - page 245

    16-13 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 16 Configuring Optional STP Features Enabling BackboneFast This example sho ws how to v eri fy that UplinkFast is enabled: Router# show spanning-tree uplinkfast UplinkFast is enabled Router# Enabling BackboneFast Note BackboneFast operates ...

  • Cisco Systems 6500 - page 246

    16-14 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 16 Configuring Optional STP Features Enabling EtherChan nel Guard Enabling EtherChannel Guard T o enable EtherChannel guard, perform this t ask: This exampl e show s how to enable EtherChannel guard: Router# configure terminal Router(conf ...

  • Cisco Systems 6500 - page 247

    16-15 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 16 Configuring Optional STP Features Enabling Loop Guard Enabling Loop Guard Use the set spanning-tree guard command to en able or disable the spanning tree loop gu ard feature on a per-por t basis. T o enable loop guard globally on the sw ...

  • Cisco Systems 6500 - page 248

    16-16 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 16 Configuring Optional STP Features Enabling Loop Guard This exampl e shows ho w to verify the conf iguration: Router# show spanning-tree interface fastEthernet 4/4 detail Port 196 (FastEthernet4/4) of VLAN0010 is forwarding Port path co ...

  • Cisco Systems 6500 - page 249

    CH A P T E R 17-1 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 17 Configuring IP Unicast Layer 3 Switching on Supervisor Engine 2 This chapter describes ho w to config ure IP unicast Layer 3 switching for Polic y Feature Card 2 (PFC2), Distribu ted Forward ing Cards (DFCs), and Multilayer Switch F ...

  • Cisco Systems 6500 - page 250

    17-2 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 17 Configuring IP Unicast Layer 3 Switch ing on Supervisor Eng ine 2 Understanding Ho w Layer 3 Switching W orks Understanding Hardware Layer 3 Switching on PFC2 and DFCs Hardware Layer 3 swit ching allo ws the PFC2 and DFCs , instead of t ...

  • Cisco Systems 6500 - page 251

    17-3 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 17 Configuring IP Unicast Layer 3 Switching on Supe rvisor Engine 2 Understanding How Laye r 3 Switching Works A recei ved IP uni cast packet is formatted (con ceptually) as follo ws: After the switc h re writes an IP unic ast pack et , it ...

  • Cisco Systems 6500 - page 252

    17-4 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 17 Configuring IP Unicast Layer 3 Switch ing on Supervisor Eng ine 2 Default Hardware Layer 3 Switching Configur ation Default Hardware Layer 3 Switching Configuration T able 17-1 sho w s the default hardware Laye r 3 switching configurati ...

  • Cisco Systems 6500 - page 253

    17-5 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 17 Configuring IP Unicast Layer 3 Switching on Supe rvisor Engine 2 Configuring Hardware Layer 3 Switching Configuring Hardware Layer 3 Switching Note For information on config uring unicast routing on the MSFC2, see Ch apter 12, “Conf ig ...

  • Cisco Systems 6500 - page 254

    17-6 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 17 Configuring IP Unicast Layer 3 Switch ing on Supervisor Eng ine 2 Displayi ng Hardwar e Laye r 3 Switching Statistics Displaying Hardware Layer 3 Switching Statistics Hardware Layer 3 swit ching statistics are obtained on a per-VLAN bas ...

  • Cisco Systems 6500 - page 255

    CH A P T E R 18-1 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 18 Configuring IP Multicast Layer 3 Switching This chapter descri bes how to configure IP multicast Layer 3 sw itching on th e Catalyst 6500 series switches. Note For more inf ormation on the syntax and u sage for the commands used in ...

  • Cisco Systems 6500 - page 256

    18-2 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 18 Config uring IP Multicast Layer 3 Switching Understanding How IP Multicas t Layer 3 Switching Works IP Multicast Layer 3 Switching Overview Polic y Feature Card 2 (PFC2) pro vides Layer 3 switching f or IP multicast flo ws using the har ...

  • Cisco Systems 6500 - page 257

    18-3 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 18 Configuri ng IP Multicast Layer 3 Switching Understanding How IP Multica st Layer 3 Switching Works The Layer 3 switc hing cache contains flow informatio n for all activ e Layer 3-switched flows. After the switching cache is popul ated, ...

  • Cisco Systems 6500 - page 258

    18-4 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 18 Config uring IP Multicast Layer 3 Switching Understanding How IP Multicas t Layer 3 Switching Works The PFC rewrites the packet as follo ws: • Changes the source MA C address in the Layer 2 frame header from the MA C ad dress of the h ...

  • Cisco Systems 6500 - page 259

    18-5 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 18 Configuri ng IP Multicast Layer 3 Switching Understanding How IP Multica st Layer 3 Switching Works Partially Switched Flows with PFC2 In PFC2 systems, (*,G) flo ws will be partially switched on the last-ho p l ea f ro u te r if t h e sh ...

  • Cisco Systems 6500 - page 260

    18-6 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 18 Config uring IP Multicast Layer 3 Switching Understanding How IP Multicas t Layer 3 Switching Works Figur e 18 -1 Redundant Multicast Router Confi guration in a Stub N etwor k Filtering of RPF Failures for Stub Networks PFC1, PFC2, and ...

  • Cisco Systems 6500 - page 261

    18-7 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 18 Configuri ng IP Multicast Layer 3 Switching Default IP Multicast Laye r 3 Switching Configuration NetFlow-Based Rate Limiting of RPF Failures W ith NetFlow-b ased rate limiting of RPF f ailures, a NetFlow entry i s created for each non-R ...

  • Cisco Systems 6500 - page 262

    18-8 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 18 Config uring IP Multicast Layer 3 Switching IP Multicast Layer 3 Switc hing Configuration Guidelines and Restrictions IP Multicast Layer 3 Switching Configuration Guidelines and Restrictions These sections describe IP Multicast Laye r 3 ...

  • Cisco Systems 6500 - page 263

    18-9 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 18 Configuri ng IP Multicast Layer 3 Switching Configuring IP Multicast Layer 3 Switching • If the SPT bit for the flow is cleared when runn ing PIM sparse mode for the int erface or group. • For packets that require fragmentation and p ...

  • Cisco Systems 6500 - page 264

    18-10 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 18 Config uring IP Multicast Layer 3 Switching Configuring IP Multic ast Layer 3 Switching Source Specific Multicast with IGMPv3, IGMP v3lite, and URD For complete in formation and procedur es about sour ce specif ic multicast with IGMPv3 ...

  • Cisco Systems 6500 - page 265

    18-11 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 18 Configuri ng IP Multicast Layer 3 Switching Configuring IP Multicast Layer 3 Switching This e xample sho ws how to en able PIM sparse mode on an interface: Router(config-if)# ip pim sparse-mode Router(config-if)# Enabling IP Multicast L ...

  • Cisco Systems 6500 - page 266

    18-12 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 18 Config uring IP Multicast Layer 3 Switching Configuring IP Multic ast Layer 3 Switching This example sh ows ho w to configu re the Layer 3 switching threshold to 10 pack ets per second: Router(config)# mls ip multicast threshold 10 Rou ...

  • Cisco Systems 6500 - page 267

    18-13 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 18 Configuri ng IP Multicast Layer 3 Switching Configuring IP Multicast Layer 3 Switching This exampl e shows ho w to enable NetFlo w-based rate limiting of non-RPF f ailures globally: Router(config)# mls ip multicast non-rpf netflow Route ...

  • Cisco Systems 6500 - page 268

    18-14 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 18 Config uring IP Multicast Layer 3 Switching Configuring IP Multic ast Layer 3 Switching This e xample sho ws how to en able the hardw are shortcut- consistenc y checker: Router (config)# mls ip multicast consistency-check Router (confi ...

  • Cisco Systems 6500 - page 269

    18-15 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 18 Configuri ng IP Multicast Layer 3 Switching Configuring IP Multicast Layer 3 Switching T o display IP multicast Layer 3 switching infor mation for an IP PIM Layer 3 interface, perf orm one of these tasks: These examples sho w how to dis ...

  • Cisco Systems 6500 - page 270

    18-16 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 18 Config uring IP Multicast Layer 3 Switching Configuring IP Multic ast Layer 3 Switching IP fast switching is enabled IP fast switching on the same interface is disabled IP Flow switching is disabled IP CEF switching is enabled IP Fast ...

  • Cisco Systems 6500 - page 271

    18-17 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 18 Configuri ng IP Multicast Layer 3 Switching Configuring IP Multicast Layer 3 Switching Outgoing interface list: GigabitEthernet4/9, Forward/Sparse-Dense, 00:14:31/00:00:00, H (132.206.72.28, 224.2.136.89), 00:14:31/00:01:40, flags:CJT I ...

  • Cisco Systems 6500 - page 272

    18-18 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 18 Config uring IP Multicast Layer 3 Switching Configuring IP Multic ast Layer 3 Switching (10.1.0.19, 224.2.2.19) Incoming interface: Vlan10, Packets switched: 1970 Hardware switched outgoing interfaces: MFD installed: Vlan10 (10.1.0.11, ...

  • Cisco Systems 6500 - page 273

    18-19 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 18 Configuri ng IP Multicast Layer 3 Switching Configuring IP Multicast Layer 3 Switching Clearing IP Multicast Layer 3 Switching Statistics T o clear IP multicast Layer 3 switchi ng statistics, perform t his task: This exampl e show s how ...

  • Cisco Systems 6500 - page 274

    18-20 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 18 Config uring IP Multicast Layer 3 Switching Configuring IP Multic ast Layer 3 Switching ...

  • Cisco Systems 6500 - page 275

    CH A P T E R 19-1 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 19 Configuring IP Unicast Layer 3 Switching on Supervisor Engine 1 Note The features des cribed in this chap ter are support ed only on Supervisor En gine 1, the pol icy feature card (PFC), and the Multilayer Switch Feature Card (MSFC ...

  • Cisco Systems 6500 - page 276

    19-2 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 19 Configuring IP Unicast Layer 3 Switch ing on Supervisor Eng ine 1 Understanding How IP MLS Works Understanding How IP MLS Works These sections provi de an ov ervie w of IP MLS and describe ho w IP MLS works: • IP MLS Overvie w , page ...

  • Cisco Systems 6500 - page 277

    19-3 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 19 Configuring IP Unicast Layer 3 Switching on Supe rvisor Engine 1 Understanding How IP MLS Works Layer 3 MLS Cache The PFC maintains a Layer 3 switchi ng table (the Layer 3 MLS cache) for Layer 3-switched flo ws. The cache also in cludes ...

  • Cisco Systems 6500 - page 278

    19-4 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 19 Configuring IP Unicast Layer 3 Switch ing on Supervisor Eng ine 1 Understanding How IP MLS Works • Security A CLs—Does not affect flo w mask. • Reflexi ve A CLs—Does not affect flo w mask. • TCP inte rcept—D oes no t affect ...

  • Cisco Systems 6500 - page 279

    19-5 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 19 Configuring IP Unicast Layer 3 Switching on Supe rvisor Engine 1 Understanding How IP MLS Works After the PFC performs the pack et re write, the packet is formatted (c onceptually) as follows: IP MLS Operation Figure 19-1 sh ows a si mpl ...

  • Cisco Systems 6500 - page 280

    19-6 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 19 Configuring IP Unicast Layer 3 Switch ing on Supervisor Eng ine 1 Default IP MLS Configuration Default IP MLS Configuration T able 19-1 sho ws the default IP MLS conf iguration. IP MLS Configuration Guidelines and Restrictions Follo w t ...

  • Cisco Systems 6500 - page 281

    19-7 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 19 Configuring IP Unicast Layer 3 Switching on Supe rvisor Engine 1 Configuring IP MLS Disabling and Enabling IP MLS on a Layer 3 Interface IP MLS is permanently enabled glo bally but can be disabled and enabled on a specified interface. T ...

  • Cisco Systems 6500 - page 282

    19-8 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 19 Configuring IP Unicast Layer 3 Switch ing on Supervisor Eng ine 1 Configuring IP MLS IP Flow switching is disabled IP CEF switching is enabled IP Fast switching turbo vector IP Normal CEF switching turbo vector IP multicast fast switchi ...

  • Cisco Systems 6500 - page 283

    19-9 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 19 Configuring IP Unicast Layer 3 Switching on Supe rvisor Engine 1 Displaying IP MLS Cache Entrie s T o display the IP MLS flo w mask configuration, perfor m this task: This exampl e shows ho w to display the MLS flo w mask conf iguration: ...

  • Cisco Systems 6500 - page 284

    19-10 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 19 Configuring IP Unicast Layer 3 Switch ing on Supervisor Eng ine 1 Displaying IP MLS Cache Ent ries This exampl e shows ho w to display IP MLS information: Router# show mls ip DstIP SrcIP DstVlan-DstMAC Pkts Bytes ---------------------- ...

  • Cisco Systems 6500 - page 285

    19-11 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 19 Configuring IP Unicast Layer 3 Switching on Supe rvisor Engine 1 Clearing IP MLS Cache Entries This exampl e show s how to disp lay MLS en tries for a specific source IP address: Router# show mls ip source 172.20.52.122 any DstIP SrcIP ...

  • Cisco Systems 6500 - page 286

    19-12 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 19 Configuring IP Unicast Layer 3 Switch ing on Supervisor Eng ine 1 Clearing IP MLS Cache Entries • slot —Clears only the entries associated with a sp ecific slot nu mber . The flow ke yword spec ifies the following addition al flow ...

  • Cisco Systems 6500 - page 287

    19-13 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 19 Configuring IP Unicast Layer 3 Switching on Supe rvisor Engine 1 Clearing IP MLS Cache Entries T o sho w the MLS contention t able and VLAN statistics, per form this task: This exampl e shows ho w to display the MLS contention table: Ro ...

  • Cisco Systems 6500 - page 288

    19-14 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 19 Configuring IP Unicast Layer 3 Switch ing on Supervisor Eng ine 1 Troubleshooting IP MLS Vlan 1 Statistics Information: ------------------------------- 65280 Layer 2 Packets Bridged, 0 Bytes 65280 Layer 3 Packets Input, 0 Bytes 65280 L ...

  • Cisco Systems 6500 - page 289

    CH A P T E R 20-1 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 20 Configuring IPX Unicast Layer 3 Switching on Supervisor Engine 1 Note The features described in this chapter are supporte d o nly on Supervisor En gine 1, PFC, and MSFC o r MSFC2. For in formation about Sup ervisor Engine 2, PFC2, a ...

  • Cisco Systems 6500 - page 290

    20-2 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 20 Configuring IPX Unicas t Layer 3 Switch ing on Supervisor Eng ine 1 Understanding How IPX MLS Wo rks Understanding How IPX MLS Works These sections provide an ov e rvie w of MLS and describe how MLS works: • IPX MLS Overvie w , page 2 ...

  • Cisco Systems 6500 - page 291

    20-3 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 20 Configuring IPX Unicast Layer 3 Switching o n Supervisor Engine 1 Understanding How IPX ML S Works The state and identity of the flow are maintained while packet traf fic is acti ve; when traff ic for a flow ceases, the entry ages out. Y ...

  • Cisco Systems 6500 - page 292

    20-4 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 20 Configuring IPX Unicas t Layer 3 Switch ing on Supervisor Eng ine 1 Understanding How IPX MLS Wo rks Receiv ed IPX packets are formatted (conceptually) as follows: The PFC rewrites the Layer 2 fra me header , changing the destination MA ...

  • Cisco Systems 6500 - page 293

    20-5 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 20 Configuring IPX Unicast Layer 3 Switching o n Supervisor Engine 1 Default IP X MLS Config uration Figure 20-1 IPX ML S Example T opology Default IPX MLS Configuration T able 20-1 di splays the default I PX MLS conf iguration. Configurati ...

  • Cisco Systems 6500 - page 294

    20-6 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 20 Configuring IPX Unicas t Layer 3 Switch ing on Supervisor Eng ine 1 Configuring IPX MLS – The no ipx rou ting command purges all IPX MLS cache entries and disables IPX MLS. – The ipx security interface command disables IPX MLS on th ...

  • Cisco Systems 6500 - page 295

    20-7 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 20 Configuring IPX Unicast Layer 3 Switching o n Supervisor Engine 1 Configuring IPX MLS T o display the IPX MLS interf ace conf iguration, perform this task: This example sh ows ho w to display interface IPX MLS information fo r interface ...

  • Cisco Systems 6500 - page 296

    20-8 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 20 Configuring IPX Unicas t Layer 3 Switch ing on Supervisor Eng ine 1 Displaying IPX MLS Infor mation Configuring the Minimum IPX MLS Flow Mask Y ou can configure the minimum gran ularity of the flo w mask for th e MLS cache on the PFC. T ...

  • Cisco Systems 6500 - page 297

    20-9 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 20 Configuring IPX Unicast Layer 3 Switching o n Supervisor Engine 1 Displaying IPX MLS Information Displaying IPX MLS Cache Entries The show mls ipx command displa ys IPX shortcut ca che entries. Y ou can specify the following parameters t ...

  • Cisco Systems 6500 - page 298

    20-10 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 20 Configuring IPX Unicas t Layer 3 Switch ing on Supervisor Eng ine 1 Displaying IPX MLS Infor mation Displaying IPX MLS Cache Entries fo r a Specific Destination Address T o display IPX MLS cache entries for a spec ific destination IPX ...

  • Cisco Systems 6500 - page 299

    20-11 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 20 Configuring IPX Unicast Layer 3 Switching o n Supervisor Engine 1 Displaying IPX MLS Information Displaying IPX MLS Cache Entries for a Specific Interface T o display IPX MLS entries for a speci fic interf ace, perform this task: This e ...

  • Cisco Systems 6500 - page 300

    20-12 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 20 Configuring IPX Unicas t Layer 3 Switch ing on Supervisor Eng ine 1 Displaying IPX MLS Infor mation T o sho w the MLS contention table and VL AN stat istics for the swit ch, perform this task: This exampl e displays the IPX MLS co nten ...

  • Cisco Systems 6500 - page 301

    20-13 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 20 Configuring IPX Unicast Layer 3 Switching o n Supervisor Engine 1 Clearing IPX MLS Cache Entries Vlan 1 Statistics Information: ------------------------------- 65280 Layer 2 Packets Bridged, 0 Bytes 65280 Layer 3 Packets Input, 0 Bytes ...

  • Cisco Systems 6500 - page 302

    20-14 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 20 Configuring IPX Unicas t Layer 3 Switch ing on Supervisor Eng ine 1 Troubleshooting IPX MLS Troubleshooting IPX MLS T able 20-2 describes deb ug commands that you can use to troubleshoot IPX MLS problems. T o configure the deb ug comma ...

  • Cisco Systems 6500 - page 303

    CH A P T E R 21-1 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 21 Configuring IGMP Snooping This chapter describes ho w to configure Internet Group Management Protocol (IGMP) snooping on th e Catalyst 6500 series switches. Note For complete syntax and usage in formation for the co mmands used in t ...

  • Cisco Systems 6500 - page 304

    21-2 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 21 Configu ring IGMP Snoop ing Understanding How IGMP Snoop ing Works IGMP Snooping Overview Y ou can confi gure the switch to use IGMP snooping in subnets that receiv e IG MP queries from either IGMP or the IGMP snoopin g querier . IGMP s ...

  • Cisco Systems 6500 - page 305

    21-3 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 21 Configuring IGMP Sn ooping Understanding How IGMP Sno oping Works Figur e 21 -1 Initial IGMP Join Messag e Multicast router A sends a ge neral query to the switch, which forw ards the query to ports 2 through 5, all members of the same V ...

  • Cisco Systems 6500 - page 306

    21-4 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 21 Configu ring IGMP Snoop ing Understanding How IGMP Snoop ing Works Figur e 21 -2 Second Host Joining a Multicast Gr oup Leaving a Multicast Group These sections describe lea ving a multicast group: • Normal Leav e Processing, page 21- ...

  • Cisco Systems 6500 - page 307

    21-5 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 21 Configuring IGMP Sn ooping Understanding How IGMP Sno oping Works response to the general query , it removes the gro up entry and relays t he IGMP leav e to the multicast router . If the multicast router rece i ves no reports from a VLAN ...

  • Cisco Systems 6500 - page 308

    21-6 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 21 Configu ring IGMP Snoop ing Default IGMP Snooping Configuration Understanding IGMP Version 3 Support W ith Release 12.1(8a)E and later releases, IGMP s nooping supp orts IGMP version 3. Because the Layer 2 table is (MA C-group, VLAN) ba ...

  • Cisco Systems 6500 - page 309

    21-7 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 21 Configuring IGMP Sn ooping Enabling the IGMP Snoo ping Querier Periodically , the IGMP querier sends IGMP quer ies that trigger IGMP report messages from the switch that wants to recei v e IP multicast tra f fic. IGMP snooping listens to ...

  • Cisco Systems 6500 - page 310

    21-8 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 21 Configu ring IGMP Snoop ing Configuring IGMP Snooping This exampl e show s how to enable the IGMP snoopin g querier on VLAN 200 and v erify the configuration: Router# interface vlan 200 Router(config-if)# igmp snooping querier Router(co ...

  • Cisco Systems 6500 - page 311

    21-9 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 21 Configuring IGMP Sn ooping Configuring IGMP Snooping Enabling IGMP Snooping T o enable IGMP snooping globall y , perform this task: This exampl e show s how to enable IGMP snooping glo bally and verify t he conf iguration: Router(config) ...

  • Cisco Systems 6500 - page 312

    21-10 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 21 Configu ring IGMP Snoop ing Configuring IGMP Snooping Configuring IGMP Snooping Learning T o conf igure IGMP snooping learnin g, perform this task: This exampl e show s how to conf igure IP IGMP snooping to learn from PIM/D V MRP packe ...

  • Cisco Systems 6500 - page 313

    21-11 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 21 Configuring IGMP Sn ooping Configuring IGMP Snooping Configuring the IGMP Query Interval Y ou can configure the interval fo r which the switch waits a fter sending a group-spec ific query to determin e if hosts are st ill inter e sted i ...

  • Cisco Systems 6500 - page 314

    21-12 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 21 Configu ring IGMP Snoop ing Configuring IGMP Snooping Configuring a Host Statically Hosts normally join multicast groups dynamically , but you can also co nfigure a h ost statically for a Layer 2 LAN port. T o conf igure a host statica ...

  • Cisco Systems 6500 - page 315

    21-13 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 21 Configuring IGMP Sn ooping Configuring IGMP Snooping This example sh ows ho w to display the multicast router interf aces in VLAN 1: Router# show ip igmp snooping mrouter interface vlan 1 vlan ports -----+------------------------------- ...

  • Cisco Systems 6500 - page 316

    21-14 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 21 Configu ring IGMP Snoop ing Configuring IGMP Snooping Multicast TTL threshold is 0 Multicast designated router (DR) is 172.20.52.94 (this system) IGMP querying router is 172.20.52.94 (this system) No multicast groups joined IGMP snoopi ...

  • Cisco Systems 6500 - page 317

    CH A P T E R 22-1 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 22 Configuring RGMP This chapter descri bes how to configure Router-P ort Group Management Pr otocol (RGMP). Release 12.1(3a)E3 and later releases support RGMP . This chapter consists of these sections: • Understanding Ho w RGMP W or ...

  • Cisco Systems 6500 - page 318

    22-2 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 22 Co nfiguring RGMP Default RGMP Configuration T able 22-1 pro vides a summary of the RGMP packet types. Default RGMP Configuration RGMP is permanently enabled on Layer 2 LAN po rt s. RGMP is disabled by default on Layer 3 interfaces. RGM ...

  • Cisco Systems 6500 - page 319

    22-3 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 22 Configuring RGMP Enabling RGMP on Layer 3 Interface s • The followi ng properties of RGMP are the same as for IGMP snoop ing: – RGMP constrains traf fic based on the m ulticast group, not on t he sender’ s IP address. – If spanni ...

  • Cisco Systems 6500 - page 320

    22-4 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 22 Co nfiguring RGMP Enabling RGMP on Layer 3 Interfaces ...

  • Cisco Systems 6500 - page 321

    CH A P T E R 23-1 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 23 Configuring Network Security This chapter contains net work security inf ormation unique to the Catalyst 650 0 series switches, which supplements the network security information and pro cedures in these publications: • Cisco IOS ...

  • Cisco Systems 6500 - page 322

    23-2 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 23 Configurin g Network Security Hardware and Software ACL Support Wi t h t h e ip unreachables command enabled (whi ch is the default), a Supervisor Engi ne 2 drops most of the denied packets in hardware and sends only a small number of p ...

  • Cisco Systems 6500 - page 323

    23-3 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 23 Con figuring Network Security Guidelines and Restrictio ns for Using Layer 4 Operators in ACLs • Flows that require l ogging are processed in softw are without impacting nonl ogged flo w processing in hardware. • The forwarding rate ...

  • Cisco Systems 6500 - page 324

    23-4 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 23 Configurin g Network Security Guidelines and Restrictions for Using Layer 4 Operators in ACLs Determining Logical Operation Unit Usage Logical operation units (LOUs) are registers that st ore operator-operand cou ples. All A CLs use LOU ...

  • Cisco Systems 6500 - page 325

    23-5 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 23 Con figuring Network Security Configuring the Cisco IO S Firewall Feature Se t Configuring the Cisco IOS Firewall Feature Set Note Release 12.1(11b)E and later releases include fire wall feature set images. These sections describe conf i ...

  • Cisco Systems 6500 - page 326

    23-6 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 23 Configurin g Network Security Configuring the Cisco IOS Firewall Feature Set • Security server support • Network address translation • Neighbor router au thentication • Event logging • User authentication and authorization Not ...

  • Cisco Systems 6500 - page 327

    23-7 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 23 Con figuring Network Security Configuring the Cisco IO S Firewall Feature Se t Configuring CBAC on Catalyst 6500 Series Switches Y ou need to do additional CB AC conf iguration on the Catalyst 6500 series swit ches. On a network device o ...

  • Cisco Systems 6500 - page 328

    23-8 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 23 Configurin g Network Security Configuring MAC Address-Based Traffic Blocking Configuring MAC Address-Based Traffic Blocking W ith 12.1(13)E and later releases, to block al l traf fic to or from a MA C addr ess in a specified VLAN, perfo ...

  • Cisco Systems 6500 - page 329

    23-9 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 23 Con figuring Network Security Configuring VLAN ACLs When you conf igure a V A CL and apply it to a VLAN , all packets entering th e VLAN are checked against this V ACL. If you apply a V A CL to the VLAN and an ACL to a routed interf ace ...

  • Cisco Systems 6500 - page 330

    23-10 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 23 Configurin g Network Security Configuring VLAN ACLs Routed Packets Figure 23-2 sh ows ho w A CLs are applied on routed and Layer 3-switched packet s. For routed or Layer 3-switch ed packet s, the A CLs are applied in the following orde ...

  • Cisco Systems 6500 - page 331

    23-11 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 23 Con figuring Network Security Configuring VLAN ACLs Multicast Packets Figure 23-3 sho ws how A CLs are applied on packets that need multicast ex pansion. For packets th at need multicast e xpansion, the A CLs are applied in the follo wi ...

  • Cisco Systems 6500 - page 332

    23-12 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 23 Configurin g Network Security Configuring VLAN ACLs • VLAN Access Map Config uration and V erif ication Examples, page 23-15 • Configuri ng a Capture Port, page 23-16 VACL Configuration Overview V ACLs us e standard and ext ended C ...

  • Cisco Systems 6500 - page 333

    23-13 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 23 Con figuring Network Security Configuring VLAN ACLs When defini ng a VLAN access map, note the follo wing syntax information: • T o insert or modify an entry , specify the map sequence number . • If you do not specify t he map seque ...

  • Cisco Systems 6500 - page 334

    23-14 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 23 Configurin g Network Security Configuring VLAN ACLs Configuring an Action Clause in a VLAN Access Map Sequence T o configure an action clause in a VLAN access map sequence, perform this task: When configuring an action clause in a VLAN ...

  • Cisco Systems 6500 - page 335

    23-15 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 23 Con figuring Network Security Configuring VLAN ACLs When applying a VLAN access map, note the follow ing syntax information : • Y ou can apply the VL AN access map to on e or more VLANs or W AN interfaces. • The vlan_list parameter ...

  • Cisco Systems 6500 - page 336

    23-16 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 23 Configurin g Network Security Configuring VLAN ACLs This exampl e show s how to defin e and apply a VLAN ac cess map to forward IP packets. In this e xam ple, IP traf fic mat ching net_10 is forw arded and all ot her IP pack ets are dr ...

  • Cisco Systems 6500 - page 337

    23-17 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 23 Con figuring Network Security Configuring VLAN ACLs When config uring a capture port, note the f ollow ing syntax information: • W ith Release 12.1(13)E and later releas es, you can co nfigu re any port as a capture por t. W ith earli ...

  • Cisco Systems 6500 - page 338

    23-18 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 23 Configurin g Network Security Configuring TCP Interc ept These restrictions apply to V A CL logging: • Supported only with Supervisor En gine 2. • Because of the rate-limiting func tion for redirected packets, V A CL logging cou nt ...

  • Cisco Systems 6500 - page 339

    23-19 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 23 Con figuring Network Security Configuring Unicast Re verse Path Forwarding Configuring Unicast Reverse Path Forwarding These sections describe conf iguring Cisco IOS Unicast Re verse P ath Forwarding (Unicast RPF): • Understanding Uni ...

  • Cisco Systems 6500 - page 340

    23-20 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 23 Configurin g Network Security Configuring Unicast Re verse Path Forwarding This e xample sho ws how to en able self-pinging : Router(config)# interface gigabitethernet 4/1 Router(config-if)# ip verify unicast source reachable-via any a ...

  • Cisco Systems 6500 - page 341

    23-21 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 23 Con figuring Network Security Configuring Unicast Flood Protection This example sho ws how to enable Unicast RPF e xist- only checking mode on Gigabit Ethernet po rt 4/1: Router(config)# interface gigabitethernet 4/1 Router(config-if)# ...

  • Cisco Systems 6500 - page 342

    23-22 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 23 Configurin g Network Security Configuring MAC Move Notification When config uring unicast flood protectio n, note the follo wing syntax informat ion: • Use the limit keywo rd to specify the unicast floods on a per source MA C address ...

  • Cisco Systems 6500 - page 343

    23-23 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 23 Con figuring Network Security Configuring MAC Move Notification This exampl e shows ho w to enable the MA C move noti fication f eature: Router(config)# mac-address-table notification mac-move Router# show mac-address-table notification ...

  • Cisco Systems 6500 - page 344

    23-24 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 23 Configurin g Network Security Configuring MAC Move Notification ...

  • Cisco Systems 6500 - page 345

    CH A P T E R 24-1 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 24 Configuring Denial of Service Protection This chapter contains i nformation on ho w to protect your system against Denial o f Service (DoS) attacks. The information covered in t his chapter is unique to the Cata lyst 65 00 series sw ...

  • Cisco Systems 6500 - page 346

    24-2 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 24 Configurin g Denial of Service Prote ction Configuring DoS Pro tection Configuring DoS Protection The follo wing sections describe the dif ferent DoS protection impl ementations and gi ve config uration exa mp le s: • Supervisor Engin ...

  • Cisco Systems 6500 - page 347

    24-3 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 24 Configuring Denial of Service Protection Configuring DoS Protection When using security A CLs to drop DoS packets, not e the follo w ing information: • The security A CL must specify the traf fic flo w to be dropped. • When adding a ...

  • Cisco Systems 6500 - page 348

    24-4 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 24 Configurin g Denial of Service Prote ction Configuring DoS Pro tection QoS ACLs Unlike Security A C Ls, QoS A CLs can be used to limit the rate of traf fic without den ying access to all the traff ic in a flow . When using QoS A CLs to ...

  • Cisco Systems 6500 - page 349

    24-5 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 24 Configuring Denial of Service Protection Configuring DoS Protection Forwarding Information Base Rate-Limiting The forwarding informatio n base (FIB) rate-limiting allo ws all packets that require software processi ng to be rate limited. ...

  • Cisco Systems 6500 - page 350

    24-6 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 24 Configurin g Denial of Service Prote ction Configuring DoS Pro tection Monitoring Packet Drop Statistics Because the rate-limiting mechanism all ows a certain number of p ackets to be forw arded for software processing, you can view the ...

  • Cisco Systems 6500 - page 351

    24-7 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 24 Configuring Denial of Service Protection Configuring DoS Protection 9.9.9.177 9.9.9.1 0 :0 :0 0 : 0 Monitoring Dropped Packets Using Monit or Session Commands This example sh ows ho w to use the monitor session command to capture and for ...

  • Cisco Systems 6500 - page 352

    24-8 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 24 Configurin g Denial of Service Prote ction Configuring DoS Pro tection ...

  • Cisco Systems 6500 - page 353

    CH A P T E R 25-1 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 25 Configuring IEEE 802.1X Port-Based Authentication This chapter describes how to conf igure IEEE 802.1X port-based authenticatio n to prev ent unauthorized devices (clients) from gaining access to the networ k. Release 12.1(13)E and ...

  • Cisco Systems 6500 - page 354

    25-2 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 25 Configuring IE EE 802.1X Port-Based Authentication Understanding 802. 1X Port-Based Authentication Device Roles W ith 802.1X port-based authe nticat ion, the devices in the network hav e specific roles as sho wn in Figure 25-1 . Figure ...

  • Cisco Systems 6500 - page 355

    25-3 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 25 Configuring I EEE 802.1X Port-Based Authentication Understanding 802.1X Port-Ba sed Authentication Authentication Initiation and Message Exchange The switch or the client can in itiate authentication. If you en able authentication on a p ...

  • Cisco Systems 6500 - page 356

    25-4 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 25 Configuring IE EE 802.1X Port-Based Authentication Understanding 802. 1X Port-Based Authentication Ports in Authorized and Unauthorized States The switch port state determines wh ether or not the client is grante d access to the network ...

  • Cisco Systems 6500 - page 357

    25-5 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 25 Configuring I EEE 802.1X Port-Based Authentication Default 802.1X Port-Based Auth entication Configuration In a point-to-po int config uration (see Figure 25-1 on page 25-2 ), only one client can be connected to the 802.1X-enabled switch ...

  • Cisco Systems 6500 - page 358

    25-6 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 25 Configuring IE EE 802.1X Port-Based Authentication 802.1X Port-Based Authentication Gu idelines and Restrictions 802.1X Port-Based Authenticatio n Guidelines and Restrictions Follo w these guidelines and restrictions wh en conf iguring ...

  • Cisco Systems 6500 - page 359

    25-7 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 25 Configuring I EEE 802.1X Port-Based Authentication Configuring 802.1X Port-Based Auth entication Configuring 802.1X Port-Based Authentication These sections describe ho w to configure 802.1X port-based authentication: • Enabling 802.1X ...

  • Cisco Systems 6500 - page 360

    25-8 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 25 Configuring IE EE 802.1X Port-Based Authentication Configuring 802.1X Port -Based Authentication When you enable 802.1X port-b ased authentication, note the follo wing syntax information: • T o create a default list that i s used when ...

  • Cisco Systems 6500 - page 361

    25-9 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 25 Configuring I EEE 802.1X Port-Based Authentication Configuring 802.1X Port-Based Auth entication • Host nam e and specific UDP port numbe rs • IP address and specific UDP port numbers The combination of the IP addre ss and UDP port n ...

  • Cisco Systems 6500 - page 362

    25-10 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 25 Configuring IE EE 802.1X Port-Based Authentication Configuring 802.1X Port -Based Authentication Note Y ou also need to configur e some settings on the RADI US serv er. These settings include the IP address of the switch and the k ey s ...

  • Cisco Systems 6500 - page 363

    25-11 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 25 Configuring I EEE 802.1X Port-Based Authentication Configuring 802.1X Port-Based Auth entication Manually Reauthenticating the Client Connected to a Port Note Reauthen tication doe s not disturb th e st atus of an alread y auth orized p ...

  • Cisco Systems 6500 - page 364

    25-12 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 25 Configuring IE EE 802.1X Port-Based Authentication Configuring 802.1X Port -Based Authentication T o change the quiet period, perform this task: This example sh ows ho w to set the quiet time on the switch to 30 secon ds: Router(config ...

  • Cisco Systems 6500 - page 365

    25-13 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 25 Configuring I EEE 802.1X Port-Based Authentication Configuring 802.1X Port-Based Auth entication Setting the Switch-to-Client Retransmi ssion Time for EAP-Request Frames The client notifies the switch that it receiv ed the EAP-request f ...

  • Cisco Systems 6500 - page 366

    25-14 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 25 Configuring IE EE 802.1X Port-Based Authentication Configuring 802.1X Port -Based Authentication This example show s how to set th e switch-to-authen ticatio n-server retransm i ssion time fo r Layer 4 packets to 25 seconds: Router(con ...

  • Cisco Systems 6500 - page 367

    25-15 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 25 Configuring I EEE 802.1X Port-Based Authentication Displaying 802.1X Status T o allo w multiple hosts (clients) on an 802.1X-autho rized port that has the dot1x port -control interface confi guration command set to auto , perf orm this ...

  • Cisco Systems 6500 - page 368

    25-16 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 25 Configuring IE EE 802.1X Port-Based Authentication Displaying 802.1X Status ...

  • Cisco Systems 6500 - page 369

    CH A P T E R 26-1 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 26 Configuring Port Security This chapter describe s how to configure the port secu rity feature. Release 12.1 (13)E and later releases support the port security feature. Note For complete syntax and usage in formation for the co mmand ...

  • Cisco Systems 6500 - page 370

    26-2 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 26 Configuring Port Secu rity Default Port Security Configuration Note If the port shut s down, all dynamically learne d addresses are removed. After the maximum number of secure MA C addresses is conf igured, they are stor ed in an addres ...

  • Cisco Systems 6500 - page 371

    26-3 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 26 Configuring Port Security Configuring Port Security Configuring Port Security on an Interface T o restrict traf fic throug h a port by limi ting and id entifying MA C addresses of the stations allo wed to access the port, perform this ta ...

  • Cisco Systems 6500 - page 372

    26-4 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 26 Configuring Port Secu rity Configuring Port Security T o return the interf ace to the defaul t condition (not a secu re port), enter the no switchport port- security interface configuration command. T o return the interf ace to the defa ...

  • Cisco Systems 6500 - page 373

    26-5 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 26 Configuring Port Security Displaying Port Security Settings T o conf igure port security agi ng, perform this task: When config uring port security ag ing, note the follo wing: • W ith all releases, you can enter the no keyword to disa ...

  • Cisco Systems 6500 - page 374

    26-6 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 26 Configuring Port Secu rity Displaying Port Security Settings T o display traf fic control i nformation, enter one or more of these commands: This examp le displays output from the sho w port-security command when you do not enter an int ...

  • Cisco Systems 6500 - page 375

    CH A P T E R 27-1 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 27 Configuring Layer 3 Protocol Filtering on Supervisor Engine 1 Note Layer 3 protocol f iltering is supported with Sup erv isor Engine 1 . Layer 3 protocol filtering is not supported with Superv isor Engine 2. This chapter describe s ...

  • Cisco Systems 6500 - page 376

    27-2 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 27 Configuring Layer 3 Pr o tocol Filtering on Supe rvisor Engine 1 Configuring Layer 3 Protocol Filtering Y ou can confi gure a Layer 2 LAN port with any on e of these modes for each protocol grou p: on , off , or auto . If the conf igura ...

  • Cisco Systems 6500 - page 377

    27-3 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 27 Configuring Layer 3 Pr oto col Filtering on Supe rvisor Engine 1 Configuring Layer 3 Protocol Filtering This exampl e show s how to enable Layer 3 protocol f iltering globally: Router# configure terminal Router(config)# protocol-filterin ...

  • Cisco Systems 6500 - page 378

    27-4 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 27 Configuring Layer 3 Pr o tocol Filtering on Supe rvisor Engine 1 Configuring Layer 3 Protocol Filtering ...

  • Cisco Systems 6500 - page 379

    CH A P T E R 28-1 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 28 Configuring Traffic Storm Control This chapter descri bes how to configure the traf fic storm control feat ure on the Catalyst 6500 series switches. Release 12.1(12c)E1 a nd later releases suppor t traf fic stor m control. Fo r earl ...

  • Cisco Systems 6500 - page 380

    28-2 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 28 Configuring Traffic Storm Control Default Traffic Storm Control Configuration T raff ic storm control monitors the le vel of each traf fi c type for wh ich you enable traf fic st orm control in 1-second traf fic storm control in terval ...

  • Cisco Systems 6500 - page 381

    28-3 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 28 Config uring Traffic Storm Control Enabling Traffic Storm Control When config uring the traf fic storm control le vel, note the foll owing : • Y ou can configure t raff ic storm control on an EtherChannel (a port channel interf ace). ? ...

  • Cisco Systems 6500 - page 382

    28-4 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 28 Configuring Traffic Storm Control Displaying Traffic Storm Control Settings Displaying Traffic Storm Control Settings T o display traf fic storm con trol information, use th e commands described in Ta b l e 2 8 - 1 . Note The show in te ...

  • Cisco Systems 6500 - page 383

    CH A P T E R 29-1 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 29 Configuring Broadcast Suppression This chapter describe s how to configure broadcast suppression on th e Catalyst 6500 series switches. Releases earlier than Re lease 12.1(12c)E1 support br oadcast suppression. Use traf fic st orm c ...

  • Cisco Systems 6500 - page 384

    29-2 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 29 Configuring Broadcast Suppression Broadcast Supp ression Configuration Guidelines and Restri ctions Figur e 29-1 Br oadcast Suppression The broadcast suppression thr eshold numbers and th e time in terval combination make the b roadcast ...

  • Cisco Systems 6500 - page 385

    29-3 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 29 Configuring Broadcast Suppression Enabling Broadcast Sup pression Enabling Broadcast Suppression T o enable broadcast suppre ssion, perform this task: When enabling broadcast suppressi on, yo u can specify the th reshold in hundre dths o ...

  • Cisco Systems 6500 - page 386

    29-4 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 29 Configuring Broadcast Suppression Enabling Broadcast Su ppression ...

  • Cisco Systems 6500 - page 387

    CH A P T E R 30-1 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 30 Configuring CDP This chapter contains i nformation about ho w to conf igure Cisco Discov ery Protocol (CDP) on the Catalyst 6500 series switches, whi ch supplements the information in th ese publications: • The Cisco IOS Conf igur ...

  • Cisco Systems 6500 - page 388

    30-2 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 30 Configur ing CDP Configuring CDP • Displaying the CDP Interface Conf iguration, page 30-3 • Monitoring and Maintaining CDP , page 30-3 Note W ith Release 12.1(11b)E and later releases, when yo u are in conf iguration mode you can en ...

  • Cisco Systems 6500 - page 389

    30-3 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 30 Configuring CDP Configuring CDP This exampl e show s how to enable CDP on F ast Ethernet port 5/1: Router(config)# interface fastethernet 5/1 Router(config-if)# cdp enable Displaying the CDP Interface Configuration T o display the CDP co ...

  • Cisco Systems 6500 - page 390

    30-4 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 30 Configur ing CDP Configuring CDP This e xample sho ws how to cl ear CDP counter co nfigu ration: Router# clear cdp counters This exampl e show s how to display information abou t the neighboring equipment: Router# show cdp neighbors Cap ...

  • Cisco Systems 6500 - page 391

    CH A P T E R 31-1 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 31 Configuring PFC QoS This chapter describe s how to configure quality of service (QoS) as implem ented on the po licy feature card (PFC) on the Catalyst 6500 series switches. Note For complete syntax and usage info rmation for the co ...

  • Cisco Systems 6500 - page 392

    31-2 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 31 Configuring PFC QoS Understanding How PFC Qo S Works QoS selects networ k traf fi c (both unicast and multi cast), prioritizes it according to its relati ve importance, and u ses congestion a voi dance to provi d e priority-inde xed tre ...

  • Cisco Systems 6500 - page 393

    31-3 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 31 Configuring PFC Qo S Understanding How PFC Qo S Works • The PFC does not provide QoS for Fle xW AN module ports. Refer to the follo wing publications for information abou t FlexW AN module QoS features: – Cisco IOS Quality of Servi c ...

  • Cisco Systems 6500 - page 394

    31-4 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 31 Configuring PFC QoS Understanding How PFC Qo S Works Note On LAN ports conf igured as Layer 2 ISL trunks, all traf fic is in ISL frames. On LAN ports config ured as Layer 2 802.1Q trunks, all traf fi c is in 802.1Q frames ex cept for tr ...

  • Cisco Systems 6500 - page 395

    31-5 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 31 Configuring PFC Qo S Understanding How PFC Qo S Works T able 31 -1 IP Precedence and DSCP V alues 3-bit IP Precedence 6 MSb 1 of T oS 6-bit DSCP 3-bit IP Precedence 6 MSb 1 of T oS 6-bit DSCP 876 543 876 543 00 0 0 0 0 0 0 0 0 0 0 0 0 0 ...

  • Cisco Systems 6500 - page 396

    31-6 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 31 Configuring PFC QoS Understanding How PFC Qo S Works PFC QoS Feature Flowcharts Figure 31-1 sh ow ho w traf fic flo ws through the compo nents that support PFC QoS features. Figur e 31 -1 T raffic Flo w Throug h PFC QoS Feat ures with P ...

  • Cisco Systems 6500 - page 397

    31-7 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 31 Configuring PFC Qo S Understanding How PFC Qo S Works Figure 31 -3 Ingr ess LAN Por t Layer 2 PFC QoS F eatur es 68001 Ye s F rame enters s witch P or t set to untrusted? ISL or 802.1Q? Drop thresholds Apply por t CoS No No Ye s P or t s ...

  • Cisco Systems 6500 - page 398

    31-8 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 31 Configuring PFC QoS Understanding How PFC Qo S Works Figure 31 -4 PFC Classificat ion, Mar king, and Policing PFC QoS Features T rust CoS T rust DSCP Egress Interface T rust IP Precedence Untrusted (Only Fr om Untrusted P or t) CoS CoS* ...

  • Cisco Systems 6500 - page 399

    31-9 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 31 Configuring PFC Qo S Understanding How PFC Qo S Works Figur e 31 -5 Mar king with PFC2 and Multila yer S witch F eature Car d 2 Figur e 31 -6 Mar king with PFC1 and Multila yer S witch F eatur e Card 1 or 2 55845 T o egress por t IP traf ...

  • Cisco Systems 6500 - page 400

    31-10 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 31 Configuring PFC QoS Understanding How PFC Qo S Works Figur e 31 -7 Egress W AN P ort Mar king Figur e 31 -8 Egr ess LAN P ort Scheduling , Congesti on A voidance, and Mar king T ransmit OSM traffic 68834 IP traffic from PFC? Write T oS ...

  • Cisco Systems 6500 - page 401

    31-11 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 31 Configuring PFC Qo S Understanding How PFC Qo S Works PFC QoS Feature Summary These sections summarize the PFC QoS fe atures: • Ingress LAN Port Features, page 31-11 • Ingress OSM Port Features, page 31-11 • PFC QoS Features, page ...

  • Cisco Systems 6500 - page 402

    31-12 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 31 Configuring PFC QoS Understanding How PFC Qo S Works Egress LAN Port Features PFC QoS supports e gress LAN port scheduling an d congestion a voidance u sing Layer 2 CoS v alues. Egress LAN port marking sets Layer 2 CoS va lues and Laye ...

  • Cisco Systems 6500 - page 403

    31-13 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 31 Configuring PFC Qo S Understanding How PFC Qo S Works Marking at Untruste d Ingress LAN Ports PFC QoS marks all frames recei ved through untrusted ingress LAN ports with the ingress port CoS v alue (the default is zero ). PFC QoS does n ...

  • Cisco Systems 6500 - page 404

    31-14 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 31 Configuring PFC QoS Understanding How PFC Qo S Works • 1p1q0t indicates one stri ct-priority queue and one standa rd queue with no conf igurable threshold (eff ecti vely a tail-drop threshold at 100 percent). • 1p1q8t indicates one ...

  • Cisco Systems 6500 - page 405

    31-15 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 31 Configuring PFC Qo S Understanding How PFC Qo S Works – Using standard receiv e-queue tail-drop threshol d 3, the switch drops i ncoming frames with CoS 4 when the recei ve-queue buf fer is 80 percent or more full. – Using standard ...

  • Cisco Systems 6500 - page 406

    31-16 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 31 Configuring PFC QoS Understanding How PFC Qo S Works Note The explanation s in this section use default v alues. Y ou can configure man y of the parameters (see the “Conf iguring PFC QoS” section on page 31-33 ). All LAN po rts of ...

  • Cisco Systems 6500 - page 407

    31-17 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 31 Configuring PFC Qo S Understanding How PFC Qo S Works • Policers, page 31-19 • Attaching Policy Map s, page 31-21 • Egress CoS an d T oS V alue s, page 31-21 Note Filtering for PFC QoS can use Layer 2 , 3, and 4 v alu es. Marking ...

  • Cisco Systems 6500 - page 408

    31-18 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 31 Configuring PFC QoS Understanding How PFC Qo S Works For all e gress traff ic, PFC QoS uses a configurable ma pping table to deri ve a CoS v alue from the internal DSCP value associated with traf fic (see the “Mapping Internal D SCP ...

  • Cisco Systems 6500 - page 409

    31-19 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 31 Configuring PFC Qo S Understanding How PFC Qo S Works • Untrusted—Sets the internal DSCP v a lue to a con figured DSCP value. Note W ith the default values, PFC QoS a pplies DSC P zero to traffic from ingress LAN ports config ured a ...

  • Cisco Systems 6500 - page 410

    31-20 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 31 Configuring PFC QoS Understanding How PFC Qo S Works Note Aggregate pol icing works independ ently on each DFC-equipp ed switching module and independently on the PFC2, which supports any non- DFC-equipped switching modules. Aggreg ate ...

  • Cisco Systems 6500 - page 411

    31-21 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 31 Configuring PFC Qo S Understanding How PFC Qo S Works Attaching Policy Maps Y ou can configure each ingress LAN port for eith er physical port-based PFC QoS (default) or VLAN-based PFC QoS (see the “Enabling VLAN-Based PFC QoS on Laye ...

  • Cisco Systems 6500 - page 412

    31-22 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 31 Configuring PFC QoS Understanding How PFC Qo S Works • 1p3q1t indicates one strict-priority queue and three standard qu eues, each with one threshold config urable as either WRED-drop or tail-drop , and one nonconf igurable tail-drop ...

  • Cisco Systems 6500 - page 413

    31-23 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 31 Configuring PFC Qo S Understanding How PFC Qo S Works 2q2t Ports For 2q2t ports, each transmit q ueue has two tail-drop threshol ds that function as follo ws: • Frames with CoS 0, 1, 2, or 3 go to the lo w-priority transmit queue (que ...

  • Cisco Systems 6500 - page 414

    31-24 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 31 Configuring PFC QoS Understanding How PFC Qo S Works 1p2q1t Ports 1p2q1t ports ha ve a strict-priority queue and tw o standa rd transmit q ueues. The standard transmit queu es each ha ve one WRED-dro p threshold and on e noncon figurab ...

  • Cisco Systems 6500 - page 415

    31-25 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 31 Configuring PFC Qo S PFC QoS Default Config uration PFC QoS Default Configuration T able 31-2 sho ws the PFC QoS default conf iguration. T a ble 31 -2 PFC QoS Default Configuration Feature Default V alue PFC QoS global enable state Disa ...

  • Cisco Systems 6500 - page 416

    31-26 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 31 Configuring PFC QoS PFC QoS Default Configuration With PFC QoS enabled Ingress LAN port trust state Untrusted 2q2t transmit-queue size percentages • Lo w priority: 80% • High priority: 20% 1p2q2t transmit-queue size p ercentages ? ...

  • Cisco Systems 6500 - page 417

    31-27 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 31 Configuring PFC Qo S PFC QoS Default Config uration 1p1q4t port recei ve-queue CoS value and drop-thresh old mapping and thresh old percentages Standard receiv e queue: • Threshold 1: – CoS 0 and 1 – T ail-drop: 50% • Threshold ...

  • Cisco Systems 6500 - page 418

    31-28 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 31 Configuring PFC QoS PFC QoS Default Configuration 1p1q8t receiv e-queue port C oS value and drop-threshold mapping Standard receiv e queue: • Threshold 1: – CoS 0 – T ail-drop: 70% – WRED-drop: 40% lo w , 70% high • Threshold ...

  • Cisco Systems 6500 - page 419

    31-29 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 31 Configuring PFC Qo S PFC QoS Default Config uration 1p2q2t port transmit-q ueue CoS valu e and drop-thresh old mapping and thresh old percentages Standard transmit queue 1 (lo w priority): • Threshold 1: – CoS 0 and 1 – WRED-drop: ...

  • Cisco Systems 6500 - page 420

    31-30 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 31 Configuring PFC QoS PFC QoS Default Configuration 1p3q1t transmit-queue CoS v alue and drop-threshold mapping Standard transmit queue 1 (lo w priority): • Threshold 1: – CoS 0 and 1 – T ail drop (disabled ): 100% – WRED-drop (e ...

  • Cisco Systems 6500 - page 421

    31-31 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 31 Configuring PFC Qo S PFC QoS Configur ation Guidelin es and Restrictio ns PFC QoS Configuration Guidelines and Restrictions Follo w these guidelines and restrictions when conf iguring PFC QoS: Guidelines: • W ith an MSFC2, Release 12. ...

  • Cisco Systems 6500 - page 422

    31-32 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 31 Configuring PFC QoS PFC QoS Configuration Guid elines and Restrictions W ithin each ra nge, PFC Qo S programs the PFC hardware with ra te values that are multiples of the granulari ty v alues. • PFC QoS has the follo wing hardware gr ...

  • Cisco Systems 6500 - page 423

    31-33 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 31 Configuring PFC Qo S Configuring PFC QoS – output service-policy k eyword – class class_name destination- address , class class_name input-interface , class class_name proto col , class class_name qos-gr oup , or class class_name so ...

  • Cisco Systems 6500 - page 424

    31-34 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 31 Configuring PFC QoS Configuring PFC QoS This exampl e shows ho w to enable PFC QoS globally: Router# configure terminal Router(config)# mls qos Router(config)# end Router# This exampl e shows ho w to verify the conf iguration: Router# ...

  • Cisco Systems 6500 - page 425

    31-35 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 31 Configuring PFC Qo S Configuring PFC QoS Creating Named Aggregate Policers T o create a named aggregate policer (see the “Policers” sect ion on page 31-19 ), perform this task: Note W ith PFC2, aggregate policers can be applied t o ...

  • Cisco Systems 6500 - page 426

    31-36 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 31 Configuring PFC QoS Configuring PFC QoS The maximum_b urst_bytes parameter is suppor ted with PFC2. The maximum_b urst_bytes parameter is not sup ported wi th PFC, but can be ente red with a value equa l to the normal_burst_bytes param ...

  • Cisco Systems 6500 - page 427

    31-37 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 31 Configuring PFC Qo S Configuring PFC QoS – Enter the policed-dscp-transmit ke yword to cause all matched out-of-p rofile tr af fic to be marked do wn as specified in the markdo wn map (see the “Configuring DSCP Mar kdo wn V alues” ...

  • Cisco Systems 6500 - page 428

    31-38 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 31 Configuring PFC QoS Configuring PFC QoS These commands configure traf fic classe s and the polic ies to be app lied to those traff ic classes and attach the policies to ports: • access-list (Optional for IP traf fic. Y o u can filter ...

  • Cisco Systems 6500 - page 429

    31-39 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 31 Configuring PFC Qo S Configuring PFC QoS Configuring MAC-Layer Nam ed Access Lists (Optional) In Release 12.1(1)E and later releases, you can configure named access lists that filter DECnet, AppleT alk, VINES, or XNS tra f fic based on ...

  • Cisco Systems 6500 - page 430

    31-40 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 31 Configuring PFC QoS Configuring PFC QoS • 0x6005—diagnostic—DEC DE Cnet Diagnostics • 0x6007—lavc-sca— DEC Local-Area V AX Cluster (LA VC), SCA • 0x6008—amber—DEC AMBER • 0x6009—mumps—DEC MUMPS • 0x8038—dec- ...

  • Cisco Systems 6500 - page 431

    31-41 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 31 Configuring PFC Qo S Configuring PFC QoS T o configure f iltering in a class ma p, perform one of these tasks: Note • W ith an MSFC2, Release 12.1(13)E and later releases support the match pr otocol class map command, which conf igure ...

  • Cisco Systems 6500 - page 432

    31-42 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 31 Configuring PFC QoS Configuring PFC QoS This example sho ws how to create a class map named ipp5 and how to configure f iltering t o match tra f fic with IP precedence 5: Router# configure terminal Enter configuration commands, one per ...

  • Cisco Systems 6500 - page 433

    31-43 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 31 Configuring PFC Qo S Configuring PFC QoS Creating a Policy Map Class and Configuring Fi ltering Note • W ith an MSFC2, Release 12.1(13) E and later releases support the class class_name pr otocol policy map command, which conf igures ...

  • Cisco Systems 6500 - page 434

    31-44 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 31 Configuring PFC QoS Configuring PFC QoS Configuring Policy Map Class Actions When config uring polic y map class actions, note the f ollo wing: • For hardware-switched tr aff ic, PFC Qo S does not supp ort the bandwidth , priority , ...

  • Cisco Systems 6500 - page 435

    31-45 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 31 Configuring PFC Qo S Configuring PFC QoS Configuring the Policy Map Class Trust State T o conf igure the polic y map class trust state, p erform this task: When config uring the polic y map class trust state, note the follo wing: • En ...

  • Cisco Systems 6500 - page 436

    31-46 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 31 Configuring PFC QoS Configuring PFC QoS Configuring a Per-Interface Policer T o configure a per -interface policer (se e the “Policers” section on page 31-19 ), perform this task: When config uring a per -interface policer , note t ...

  • Cisco Systems 6500 - page 437

    31-47 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 31 Configuring PFC Qo S Configuring PFC QoS – Because the token buck et must be large enough to hold at l east one frame, set the parameter larger than the maximum Layer 3 pack et size of the traf fic being policed. – For TCP traf fic, ...

  • Cisco Systems 6500 - page 438

    31-48 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 31 Configuring PFC QoS Configuring PFC QoS • (Opt ional—Not supported with the flow keyw ord) For traf fic that exceeds the PIR, you can specify a violate action as follows: – For marking without policing, you can enter the transmit ...

  • Cisco Systems 6500 - page 439

    31-49 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 31 Configuring PFC Qo S Configuring PFC QoS This exampl e shows ho w to verify the conf iguration: Router# show policy-map max-pol-ipp5 Policy Map max-pol-ipp5 class ipp5 class ipp5 police flow 10000000 10000 conform-action set-prec-transm ...

  • Cisco Systems 6500 - page 440

    31-50 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 31 Configuring PFC QoS Configuring PFC QoS This exampl e shows ho w to verify the conf iguration: Router# show policy-map interface fastethernet 5/36 FastEthernet5/36 service-policy input: pmap1 class-map: cmap1 (match-all) 0 packets, 0 b ...

  • Cisco Systems 6500 - page 441

    31-51 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 31 Configuring PFC Qo S Configuring PFC QoS By default, mi croflo w policers affect on ly routed traf fic. T o enable microflow p olicing of bridged tr aff ic on specified VLANs, perfo rm this task: This exampl e show s how to enable micro ...

  • Cisco Systems 6500 - page 442

    31-52 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 31 Configuring PFC QoS Configuring PFC QoS This exampl e show s how to disabl e PFC QoS on the VLAN 5 interf ace: Router# configure terminal Enter configuration commands, one per line. End with CNTL/Z. Router(config)# interface vlan 5 Rou ...

  • Cisco Systems 6500 - page 443

    31-53 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 31 Configuring PFC Qo S Configuring PFC QoS Note Configuri ng a Layer 2 LAN port for VLAN- based PFC QoS preserv es the policy map port confi guration. The no mls qos vlan-based port command reenab les any pre viously configured port comma ...

  • Cisco Systems 6500 - page 444

    31-54 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 31 Configuring PFC QoS Configuring PFC QoS Configuring the Ingress LAN Port CoS Value Note Whether or not PFC QoS uses the CoS value appl ied with the mls qos cos command depends on the trust state of the port and the trust state of the t ...

  • Cisco Systems 6500 - page 445

    31-55 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 31 Configuring PFC Qo S Configuring PFC QoS Note • Enter the show queueing interface { et hernet | fastethernet | gigabitether net | tengigabitethernet } slo t/port | include type command to see the queue structure of a port (see the “ ...

  • Cisco Systems 6500 - page 446

    31-56 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 31 Configuring PFC QoS Configuring PFC QoS T o configure the drop t hresholds, perform this task: This exampl e show s how to configure the receive-qu eue drop thresholds for G igabit Ethernet port 1/1: Router# configure terminal Enter co ...

  • Cisco Systems 6500 - page 447

    31-57 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 31 Configuring PFC Qo S Configuring PFC QoS Configuring a WRED-Drop a nd Tail-Drop Transmit Queue 1p3q1t ports ha ve both WRED-drop and tail- drop thresholds in their transmi t queues. T o configure the drop t hresholds, perform this task: ...

  • Cisco Systems 6500 - page 448

    31-58 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 31 Configuring PFC QoS Configuring PFC QoS This exampl e shows ho w to verify the conf iguration: Router# show queueing interface gigabitethernet 1/1 | begin Transmit queues Transmit queues [type = 1p2q2t]: Queue Id Scheduling Num of thre ...

  • Cisco Systems 6500 - page 449

    31-59 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 31 Configuring PFC Qo S Configuring PFC QoS This ex ample sho ws ho w to configure recei ve queue 1/threshold 1 and transmit queue 1/t hreshold 1 for Gigabit Ethernet port 2/1 : Router# configure terminal Enter configuration commands, one ...

  • Cisco Systems 6500 - page 450

    31-60 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 31 Configuring PFC QoS Configuring PFC QoS • Threshold 0 is a nonconf igurable 100-percent ta il-drop threshold on these por t types: – 1p1q0t (recei ve) – 1p1q8t (recei ve) – 1p3q1t (transmit) – 1p2q1t (transmit) • The standa ...

  • Cisco Systems 6500 - page 451

    31-61 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 31 Configuring PFC Qo S Configuring PFC QoS Mapping CoS Values to St andard Transmit-Queue Thresholds T o map CoS values to standard tr ans mit-queue thresholds, perform t his task: This example sh ows ho w to map the CoS values 0 and 1 to ...

  • Cisco Systems 6500 - page 452

    31-62 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 31 Configuring PFC QoS Configuring PFC QoS When mapping CoS v alues to the strict-priority queues, not e the follo wing: • The queue number is always 1. • Y ou can enter up to 8 CoS v alues to map to the queue. This example shows ho w ...

  • Cisco Systems 6500 - page 453

    31-63 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 31 Configuring PFC Qo S Configuring PFC QoS T o map CoS values to tail-dr op thresholds, perform this t ask: When mapping CoS v alues to a tail-drop threshold, note the f ollowing : • Use the transmit queue and threshol d numbers. • Qu ...

  • Cisco Systems 6500 - page 454

    31-64 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 31 Configuring PFC QoS Configuring PFC QoS Allocating Bandwidth Between LAN-Port Transmit Queues The switch transmits frames from one standard queu e at a time using a WRR alg orithm. WRR uses the ratio between queue weight v alues to dec ...

  • Cisco Systems 6500 - page 455

    31-65 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 31 Configuring PFC Qo S Configuring PFC QoS When setting the receiv e-queue size ratio, note the followi ng: • The rcv-queue queue-limit co mmand configur es ports on a per -ASIC basis. • Estimate the mix of strict pri ority-to-standar ...

  • Cisco Systems 6500 - page 456

    31-66 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 31 Configuring PFC QoS Configuring PFC QoS This exampl e show s how to set the transmit-queue size ratio for Gig abit Ethernet port 1/2: Router# configure terminal Enter configuration commands, one per line. End with CNTL/Z. Router(config ...

  • Cisco Systems 6500 - page 457

    31-67 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 31 Configuring PFC Qo S Configuring PFC QoS Mapping Received IP Pr ecedence Values to Internal DSCP Values T o conf igure the mapping of receiv ed IP precedenc e values to the DSCP v a lue that PFC QoS uses internally on the PFC (see the ? ...

  • Cisco Systems 6500 - page 458

    31-68 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 31 Configuring PFC QoS Configuring PFC QoS This ex ample sho ws how to conf igure internal DSCP v a lues 0, 8, 16, 24, 32, 40, 48, and 54 to be mapped to egress CoS value 0: Router# configure terminal Enter configuration commands, one per ...

  • Cisco Systems 6500 - page 459

    31-69 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 31 Configuring PFC Qo S Configuring PFC QoS Note When you create a policer that does not use the pir keyw ord, and the maximu m_bu rst_bytes parameter is equal to the normal_burst_bytes parameter (which occurs if you do not enter the maxim ...

  • Cisco Systems 6500 - page 460

    31-70 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 31 Configuring PFC QoS Configuring PFC QoS Configuring PFC QoS Statistics Data Export Note Release 12.1(11b)E and later releases su pport PFC QoS statistics data export. These sections describe ho w to configure PFC QoS st atistics data e ...

  • Cisco Systems 6500 - page 461

    31-71 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 31 Configuring PFC Qo S Configuring PFC QoS Enabling PFC QoS Statistics Data Export for a Port T o enable PFC QoS statisti cs data e x port for a port, perform this task: This exampl e show s how t o enable PFC QoS statistics data e xport ...

  • Cisco Systems 6500 - page 462

    31-72 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 31 Configuring PFC QoS Configuring PFC QoS Enabling PFC QoS Statistics Data Export for a Named Aggregate Policer T o enable PFC QoS statisti cs data exp ort for a named aggregate poli cer , perform this task: This exa mple sho ws how to e ...

  • Cisco Systems 6500 - page 463

    31-73 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 31 Configuring PFC Qo S Configuring PFC QoS Enabling PFC QoS Statistics Da ta Export for a Class Map T o enable PFC QoS statisti cs data export f or a class map, perform this task: This exampl e show s how to en able PFC QoS statistics dat ...

  • Cisco Systems 6500 - page 464

    31-74 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 31 Configuring PFC QoS Configuring PFC QoS • For data from a VLAN interface: – Export type (“5” for a class map and VLAN) – Class map name – Direction (“in”) – PFC or DFC slot number – VLAN ID – Number of in-prof ile ...

  • Cisco Systems 6500 - page 465

    31-75 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 31 Configuring PFC Qo S Configuring PFC QoS This examp le shows h ow to set the PFC QoS statisti cs data expor t interv al and v erify the conf iguration: Router(config)# mls qos statistics-export interval 250 Router(config)# end Router# s ...

  • Cisco Systems 6500 - page 466

    31-76 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 31 Configuring PFC QoS Configuring PFC QoS T able 31-4 list s the supported PFC QoS data ex port se verity param eter va lues. This exampl e show s how to configu re 172.20.52.3 as the destinatio n host and syslog as the UDP po rt number ...

  • Cisco Systems 6500 - page 467

    31-77 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 31 Configuring PFC Qo S Configuring PFC QoS Setting the PFC QoS Statistics Data Export Field Delimiter T o set the PFC QoS statistics data e xport fi eld delimiter , perform this task: This example sh ows ho w to set the PFC QoS statistics ...

  • Cisco Systems 6500 - page 468

    31-78 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 31 Configuring PFC QoS Configuring PFC QoS ...

  • Cisco Systems 6500 - page 469

    CH A P T E R 32-1 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 32 Configuring UDLD This chapter descri bes how to configure the UniDirectio nal Link Detectio n (UDLD) pr otocol in Release 12.1(2)E and later rele ases on the Catalyst 6500 series switches. Note For complete syntax and usage in forma ...

  • Cisco Systems 6500 - page 470

    32-2 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 32 Configuring UDLD Understanding How UD LD Works A unidirectional link occurs whene ver traf fic tran smitted by the local d evice o ver a link is recei ved by the neighbor b ut traf fic transmitted from the neighbor is not recei ved by t ...

  • Cisco Systems 6500 - page 471

    32-3 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 32 Configuring UDLD Default UDLD Configuration Default UDLD Configuration T able 32-1 sho ws the default UDLD con figur ation. Configuring UDLD These sections describe ho w to configure UD LD: • Enabling UDLD Globally , page 32-3 • Enab ...

  • Cisco Systems 6500 - page 472

    32-4 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 32 Configuring UDLD Configuring UDLD Enabling UDLD on Individual LAN Interfaces W ith Releas e 12.1(13)E and late r re leases, to enable UDLD on indi vidual LAN ports, perfo rm this task: W ith earlier releases, to enable UDLD on indi vidu ...

  • Cisco Systems 6500 - page 473

    32-5 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 32 Configuring UDLD Configuri ng UDLD Disabling UDLD on Fiber-Optic LAN Interfaces W ith Release 12.1(13)E and later releases, to disa ble UDLD on indi vidual fi ber-opt ic LAN ports, perform this task: W ith earlier releases, to disable UD ...

  • Cisco Systems 6500 - page 474

    32-6 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 32 Configuring UDLD Configuring UDLD Resetting Disabled LAN Interfaces T o reset all LAN ports th at hav e been shut down b y UDLD, perform this task: Command Purpose Router# udld reset Resets all LAN ports that ha ve been shut down b y UD ...

  • Cisco Systems 6500 - page 475

    CH A P T E R 33-1 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 33 Configuring NDE This chapter describe s how to configure NetFlo w Data Export (NDE) on the Catalyst 6500 series switches. Note For complete syntax and usage in formation for the co mmands used in this chap ter , refer to the Catalys ...

  • Cisco Systems 6500 - page 476

    33-2 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 33 Configuring N DE Understanding How NDE Works NDE Overview NDE makes routed-tr af fic stat istics av ailable for analys is b y an external data collector . Y ou can use NDE to analyze all IP unicast traffic that is Layer 3-switch ed on t ...

  • Cisco Systems 6500 - page 477

    33-3 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 33 Configuring NDE Understanding How NDE Works • full—A more-specific flo w mask. The PFC creates an d mainta ins a separate cache entry for each IP flow . A full entry includes the source IP addr ess, destination IP address, protocol, ...

  • Cisco Systems 6500 - page 478

    33-4 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 33 Configuring N DE Understanding How NDE Works T able 33-2 NDE V ersion 5 Flo w Recor d For mat Bytes Content Description Flow masks: • X=Populated • A=Additional field (see the “Populati ng Additional NDE Fields” section on page ...

  • Cisco Systems 6500 - page 479

    33-5 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 33 Configuring NDE Understanding How NDE Works T able 33-3 NDE V ersion 7 Heade r For mat Bytes Content Description 0–1 versi on Netflow export format v ersion number 2–3 count Number of flo ws exported in this pack et (1–30) 4–7 Sy ...

  • Cisco Systems 6500 - page 480

    33-6 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 33 Configuring N DE Understanding How NDE Works MLS Cache Entries NDE captures statistics for Layer 3-switc hed flows in the MLS cache on the PFC. NDE maintains traff ic statistics for each acti ve flo w in the MLS cache and incremen ts th ...

  • Cisco Systems 6500 - page 481

    33-7 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 33 Configuring NDE Default NDE Config uration Y ou can confi gure sampled NetFlo w to use time-based sampling or pack et-based sampling. Ta b l e 3 3 - 5 lists the time-based sampling rates and export intervals. As examples, if you con figu ...

  • Cisco Systems 6500 - page 482

    33-8 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 33 Configuring N DE Configuring NDE Configuring NDE These sections describe ho w to configure ND E: • Configuring N DE on the PFC, page 33-8 • Configuring N DE on the MSFC, page 33-13 • Displaying the NDE Address and Port Conf igurat ...

  • Cisco Systems 6500 - page 483

    33-9 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 33 Configuring NDE Configuring NDE This exa mple sho ws how to enab le NDE from the PFC: Router(config)# mls nde sender Setting the Minimum IP MLS Flow Mask Y ou can set the min imum granularity of the flo w mask for the MLS cache on th e P ...

  • Cisco Systems 6500 - page 484

    33-10 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 33 Configuring N DE Configuring NDE Populating Additional NDE Fields W ith Release 12.1(13)E and later releases, you can conf igure NDE to populate the follo wing additional fields in the NDE packets: • IP address of the next hop router ...

  • Cisco Systems 6500 - page 485

    33-11 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 33 Configuring NDE Configuring NDE A typical cache entry that is rem oved is t he entry for flo ws to and from a Domain Name Server (DNS) or TFTP server . This entry might not be used again after it is created. The PFC sa ves space in the ...

  • Cisco Systems 6500 - page 486

    33-12 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 33 Configuring N DE Configuring NDE Configuring Sampled NetFlo w Globally T o conf igure sampled NetFlo w globally , perform this task: When you conf igure sampled NetFlo w globally , note the followi ng: • The valid v alues for rat e a ...

  • Cisco Systems 6500 - page 487

    33-13 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 33 Configuring NDE Configuring NDE Configuring NDE on the MSFC This section supplemen ts the NetFlo w procedures at this URL: http://www .cisco.com/u ni vercd/cc/td/ doc/product/softw are/ios121/121cgcr /switch_r/inde x.htm These sections ...

  • Cisco Systems 6500 - page 488

    33-14 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 33 Configuring N DE Configuring NDE Configuring the NDE Destination T o conf igure the destination IP ad dress and UDP port to recei ve the NDE statist ics, perform this task: This exampl e shows ho w to conf igure the NDE flo w destinati ...

  • Cisco Systems 6500 - page 489

    33-15 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 33 Configuring NDE Configuring NDE Version 1 flow records 0 flows exported in 0 udp datagrams 0 flows failed due to lack of export packet 0 export packets were sent up to process level 0 export packets were dropped due to no fib 0 export p ...

  • Cisco Systems 6500 - page 490

    33-16 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 33 Configuring N DE Configuring NDE Configuring a Host and Port Filter T o conf igure a host and TCP/UDP por t flow filter , perform this task: This exampl e show s how to conf igure a source host and destinati on TCP/UDP port flo w filte ...

  • Cisco Systems 6500 - page 491

    33-17 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 33 Configuring NDE Configuring NDE Clearing an NDE Flow Filter T o clear the NDE flo w filter and reset the f ilter to the defaul t (all flo ws exported), per form this task: This e xample sho ws how to clear the NDE flo w filt er so that ...

  • Cisco Systems 6500 - page 492

    33-18 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 33 Configuring N DE Configuring NDE ...

  • Cisco Systems 6500 - page 493

    CH A P T E R 34-1 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 34 Configuring Local SPAN and RSPAN This chapter describe s how to configure local Sw itched Port Analyzer (SP A N) and remote SP AN (RSP AN) on the Catalyst 6500 series switches. The Catalyst 6500 series swit ches support RSP AN with ...

  • Cisco Systems 6500 - page 494

    34-2 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 34 Configuring Local SPAN and RSPAN Understanding How Loca l SPAN and RSPAN Work Local SPAN Overview Local SP AN supports source ports, source VLANs, a nd destinat ion ports on the same Catalyst 65 00 series switch. Local SP AN copies traf ...

  • Cisco Systems 6500 - page 495

    34-3 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 34 Con figuring Local SPAN and RSPAN Understanding How Loca l SPAN and RSPAN Work RSPAN Overview RSP AN supports source ports, source VLANs, and destinatio n ports on dif ferent switches, which provid es remote monitoring of multipl e switc ...

  • Cisco Systems 6500 - page 496

    34-4 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 34 Configuring Local SPAN and RSPAN Understanding How Loca l SPAN and RSPAN Work Monitored Traffic These sections describe the traff ic th at SP AN (local or remote) can monitor: • Monitored T raff ic Direction, page 34-4 • Monitored T ...

  • Cisco Systems 6500 - page 497

    34-5 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 34 Con figuring Local SPAN and RSPAN Local SPAN and RSPAN Configura tion Guidelines and Restrictions Source VLANs A source VLAN i s a VLAN monito red for netwo rk traf f ic analysis. VLAN-ba sed SP AN (VSP AN) uses a VLAN as the SP AN sourc ...

  • Cisco Systems 6500 - page 498

    34-6 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 34 Configuring Local SPAN and RSPAN Local SPAN and RSPAN Co nfiguration Guidelin es and Restrictions Local SPAN and RSPAN Source and Destination Limits These are the local SP AN and RSP AN source and destination limits: Local SPAN and RSPA ...

  • Cisco Systems 6500 - page 499

    34-7 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 34 Con figuring Local SPAN and RSPAN Local SPAN and RSPAN Configura tion Guidelines and Restrictions • When enabled, local SP AN or RSP AN uses any previously ente red configuration . • When you specify sources and do not specify a traf ...

  • Cisco Systems 6500 - page 500

    34-8 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 34 Configuring Local SPAN and RSPAN Configuring Loca l SPAN and RSPAN • MA C address lea rning is disab led on the RSP AN VLAN. • Y ou can use an output access control list (A C L) on the RSP AN VLAN in the RSP AN source switch to filt ...

  • Cisco Systems 6500 - page 501

    34-9 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 34 Con figuring Local SPAN and RSPAN Configuring Local SPAN and RSPAN Configuring RSPAN VLANs T o configure a VLAN as an RS P AN VLAN, perform th is task: Configuring Local or RSPAN Sources Note T o configu re an RSP AN source session, conf ...

  • Cisco Systems 6500 - page 502

    34-10 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 34 Configuring Local SPAN and RSPAN Configuring Loca l SPAN and RSPAN • vlan_rang e is fi rst_vlan_ ID - last_vlan_ID • mixed_vlan_list is, in any order , single_vlan , vlan_rang e , ... When clearing monitor sessions, note t he follo ...

  • Cisco Systems 6500 - page 503

    34-11 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 34 Con figuring Local SPAN and RSPAN Configuring Local SPAN and RSPAN Configuring a Desti nation Port as an Unconditional Trunk T o tag the m onitored traffic with Release 12.1( 13)E and later releases, conf igure the destination por t as ...

  • Cisco Systems 6500 - page 504

    34-12 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 34 Configuring Local SPAN and RSPAN Configuring Loca l SPAN and RSPAN When config uring monitor sessio ns, note the follo wing syntax information: • single _interface is interface type slot / port ; type is ethernet , fastethernet , gig ...

  • Cisco Systems 6500 - page 505

    34-13 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 34 Con figuring Local SPAN and RSPAN Configuring Local SPAN and RSPAN This example sh ows ho w to display the full details of session 2: Router# show monitor session 2 detail Session 2 ------------ Type : Remote Source Session Source Ports ...

  • Cisco Systems 6500 - page 506

    34-14 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 34 Configuring Local SPAN and RSPAN Configuring Loca l SPAN and RSPAN ...

  • Cisco Systems 6500 - page 507

    CH A P T E R 35-1 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 35 Configuring Web Cache Services Using WCCP This chapter d escribes how to configure the Cata lyst 6500 series switche s to redirect traf fic to cache engines (web caches) using the W eb Cache Communi cation Protocol (WCCP) , and desc ...

  • Cisco Systems 6500 - page 508

    35-2 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 35 Config uri ng Web Cache Services Using WCCP Understanding WCCP Understanding WCCP These sections describe WCCP: • WCCP Overvie w , page 35-2 • Hardware Acceleration, page 35-2 • Understanding WCCPv1 Conf iguration, page 35-3 • U ...

  • Cisco Systems 6500 - page 509

    35-3 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 35 Configuring Web Ca che Services Using WCCP Understanding WCCP W ith Release 12.1(2)E and later releases, WCCP Layer 2 PFC redirection allo ws Cisco Cache Engines to use hardware-supported Layer 2 redirection. A dir ectly connected Cache ...

  • Cisco Systems 6500 - page 510

    35-4 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 35 Config uri ng Web Cache Services Using WCCP Understanding WCCP 2. The cache engines send their IP addresses to t he control router using WCCP , indicati ng their presence. Routers and cache engine s communicate to each other via a contr ...

  • Cisco Systems 6500 - page 511

    35-5 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 35 Configuring Web Ca che Services Using WCCP Understanding WCCP Using WCCPv1, the cache e ngines were configured wi th the address of the single router . WC CPv2 requires that each cache engine be aware of all the routers in the service gr ...

  • Cisco Systems 6500 - page 512

    35-6 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 35 Config uri ng Web Cache Services Using WCCP Understanding WCCP The cache engine s in service grou p specify traffic to be redirected by protocol (TCP or U DP) and port (source or destination). Each service g roup has a priority status a ...

  • Cisco Systems 6500 - page 513

    35-7 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 35 Configuring Web Ca che Services Using WCCP Restrictions for WCCPv2 Restrictions for WCCPv2 The follo wing limitations apply to WCCP v2: • WCCP works only with IP netwo rks. • For routers servicing a multicast cluster , the time to li ...

  • Cisco Systems 6500 - page 514

    35-8 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 35 Config uri ng Web Cache Services Using WCCP Configuring WCCP WCCPv1 does not use the WCCP commands from earlier Cisco IOS versions. Instead, use the WCCP commands documented in th is chapter . If a function is not allo wed in WCCPv1, an ...

  • Cisco Systems 6500 - page 515

    35-9 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 35 Configuring Web Ca che Services Using WCCP Configuring WCCP Note • A future release of Cisco Application and Conten t Networking System (A CNS) software (Release 4.2.2 or later) and Release 12.1(13)E and l ater releases support the ip ...

  • Cisco Systems 6500 - page 516

    35-10 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 35 Config uri ng Web Cache Services Using WCCP Configuring WCCP Registering a Router to a Multicast Address If you decide to use the multicast add ress option for your ser vice group, you must conf igure the router to listen for the multi ...

  • Cisco Systems 6500 - page 517

    35-11 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 35 Configuring Web Ca che Services Using WCCP Configuring WCCP Setting a Password for a Router and Cache Engines MD5 password security requires that eac h router and cache engine that wants to j oin a service gro up be confi gured with the ...

  • Cisco Systems 6500 - page 518

    35-12 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 35 Config uri ng Web Cache Services Using WCCP Verifying and Monitoring WCCP Configuration Settings T o conf igure an MD5 password fo r use by the router in WCCP commu nications, perform thi s task in global conf iguration mode: Verifying ...

  • Cisco Systems 6500 - page 519

    35-13 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 35 Configuring Web Ca che Services Using WCCP WCCP Configuration Examples • Setting a Passw ord for a Router and Cache Engines Example, page 35-15 • V erifying WCCP Settings Example, page 35-15 Changing the Version of WCCP on a Router ...

  • Cisco Systems 6500 - page 520

    35-14 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 35 Config uri ng Web Cache Services Using WCCP WCCP Configuration Examples . . . WCCP Redirect inbound is enabled WCCP Redirect exclude is disabled . . . Running a Reverse Proxy Service Example The follo wing example assumes you a conf ig ...

  • Cisco Systems 6500 - page 521

    35-15 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 35 Configuring Web Ca che Services Using WCCP WCCP Configuration Examples The follo wing example conf igures a router to redirect web-related packet s receiv ed through interface ethernet 0/1, destined to an y host except 209.165.196.51: R ...

  • Cisco Systems 6500 - page 522

    35-16 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 35 Config uri ng Web Cache Services Using WCCP WCCP Configuration Examples interface Ethernet1 ip address 10.4.1.1 255.255.255.0 no ip directed-broadcast ip wccp 99 redirect out no ip route-cache no ip mroute-cache ! interface Serial0 no ...

  • Cisco Systems 6500 - page 523

    CH A P T E R 36-1 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 36 Configuring SNMP IfIndex Persistence This chapter describe s how to configure the SNMP ifInde x persistence feature on Catalyst 6500 series switches. Rel ease 12.1(13)E a nd later re le ases support SNMP ifIndex persist ence. This c ...

  • Cisco Systems 6500 - page 524

    36-2 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 36 Configuring SNM P IfIndex Persistence Configuring SNMP IfIndex Persistence Note T o verify that ifInde x commands have been configured, use the more system:running-config command. Enabling and Disabling SNMP IfIndex Persistence Globally ...

  • Cisco Systems 6500 - page 525

    36-3 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 36 Config uring SNMP IfIndex Persistence Configuration Example s T o clear the interface-specific SNMP ifInde x persis tenc e setting and configure the interface to use the global conf iguration setting, perform this task: Configuration Exa ...

  • Cisco Systems 6500 - page 526

    36-4 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 36 Configuring SNM P IfIndex Persistence Configuration Examples Clearing SNMP IfIndex Persist ence Configuration from a Specific Interface Example In the follo wing example, any pre vious setting for SNMP ifInde x persistence on Ethernet i ...

  • Cisco Systems 6500 - page 527

    CH A P T E R 37-1 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 37 Configuring the Switch Fabric Module This chapter descri bes how to configure the Switch Fabric Module (SFM) for the Catalyst 6500 series switches. Note For complete syntax and usage in formation for the co mmands used in this chap ...

  • Cisco Systems 6500 - page 528

    37-2 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 37 Co nfigur ing the Switch Fabric Module Understanding How the Switch Fabric Module Works Switch Fabric Module Slots W ith a WS-C6513 chassis, install the Swit ch Fabric Mo dules in either slot 7 or 8. Note In a WS-C6513 chassis, only slo ...

  • Cisco Systems 6500 - page 529

    37-3 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 37 Configur ing the Switch Fabric Module Configuring the Sw itch Fabric Module • T runcated mode—The switch uses this mode for tr af fic between fabric-enabled modules when there are both fabric-enabled and nonf abric-enabled modules in ...

  • Cisco Systems 6500 - page 530

    37-4 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 37 Co nfigur ing the Switch Fabric Module Configuring the Switch Fabric Module When config uring the switching mode, note the fo llowi ng syntax information: • T o allo w use of nonfabric-enabl ed modules or to allo w fabric-enabled modu ...

  • Cisco Systems 6500 - page 531

    37-5 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 37 Configur ing the Switch Fabric Module Monitoring the Switch Fabric Module Configuring an LCD Message T o conf igure a message for display on the LCD, p erform this task: When config uring a message for display on the LCD, no te the follo ...

  • Cisco Systems 6500 - page 532

    37-6 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 37 Co nfigur ing the Switch Fabric Module Monitoring the Switch Fabr ic Module This exampl e show s how to display module information: Router# show module 5 Mod Ports Card Type Model Serial No. --- ----- ----------------------------------- ...

  • Cisco Systems 6500 - page 533

    37-7 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 37 Configur ing the Switch Fabric Module Monitoring the Switch Fabric Module Displaying the Fabric Status T o display the fab ric status of one or all switching mod ules, perform this task: This example sh ows ho w to display the fabric sta ...

  • Cisco Systems 6500 - page 534

    37-8 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 37 Co nfigur ing the Switch Fabric Module Monitoring the Switch Fabr ic Module This exampl e show s how to display fabric errors on all modules: Router# show fabric errors slot channel module module module fabric crc hbeat sync sync 1 0 0 ...

  • Cisco Systems 6500 - page 535

    CH A P T E R 38-1 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 38 Power Management and Environmental Monitoring This chapter describes the po wer management an d en vironmental monitori ng features in the Catalyst 6500 series switches. Note For complete syntax and usage in formation for the co mma ...

  • Cisco Systems 6500 - page 536

    38-2 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 38 Power Managem ent and E nvironmental Mo nitoring Understanding How Po wer Management Works Enabling or Disabling Power Redundancy From global c onfiguration mode, enter th e power redundancy-mode combined | r edundant commands to disabl ...

  • Cisco Systems 6500 - page 537

    38-3 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 38 Power Management and Envir onmental Monitoring Understanding How Pow er Management Works Using the CLI to Power Modules Off and On Y ou can power do wn a module from the co mmand-line interface (CLI) by entering the no power enable modul ...

  • Cisco Systems 6500 - page 538

    38-4 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 38 Power Managem ent and E nvironmental Mo nitoring Understanding How Environme ntal Monitoring Works Using the CLI to Power Cycle Modules From global conf iguration mode, enter the power cycle module slot command to po w er cycle (reset) ...

  • Cisco Systems 6500 - page 539

    38-5 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 Chapter 38 Power Management and Envir onmental Monitoring Understanding How Environm ental Monitoring Works T able 38-2 En viron mental Monito r ing for Su pervisor Engine and S witching Mo dules Component Alarm T ype LED Indication Action Supervis ...

  • Cisco Systems 6500 - page 540

    38-6 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Chapter 38 Power Managem ent and E nvironmental Mo nitoring Understanding How Environme ntal Monitoring Works ...

  • Cisco Systems 6500 - page 541

    A-1 Catalyst 6500 Series Switch Cisco IOS So ftware Configuration Guide—Release 12.1 E 78-14099-04 APPENDIX A Acronyms Ta b l e A - 1 defines the acron yms used in this publication. T able A -1 List of A cron yms Acronym Expansion AAL A TM adapta tion layer A CE a ccess control entry A C L access control list AFI authority and format identif ier ...

  • Cisco Systems 6500 - page 542

    A-2 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Appendix A Acronyms CEF Cisco Express Forwardi ng CHAP Challenge Handshake Authentication Protocol CIR committed informat ion rate CLI command-line interface CLNS Connection-Less Network Service CMNS Connection-Mode Network Servi ce COPS Common Ope ...

  • Cisco Systems 6500 - page 543

    A-3 Catalyst 6500 Series Switch Cisco IOS So ftware Configuration Guide—Release 12.1 E 78-14099-04 Appendix A Acronyms DTR data terminal ready DXI data e xchange in terface EAP Extensible Authenticati on Protocol EARL Enhanced Address Recognition Logic EEPR OM electrically er asable programmable read-only memo ry EHSA enhanced high system a vaila ...

  • Cisco Systems 6500 - page 544

    A-4 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Appendix A Acronyms ISL Inter -Switch Link ISO International Org anization of Standardizati on ISR Integrated SONET router LAN local area network LANE LAN Emulation LAPB Link Access Procedure, Balanced LCP Link C ontrol Pro tocol LD A Local Directo ...

  • Cisco Systems 6500 - page 545

    A-5 Catalyst 6500 Series Switch Cisco IOS So ftware Configuration Guide—Release 12.1 E 78-14099-04 Appendix A Acronyms NET network entity title NetBIOS Network Basic I nput/Output System NFFC NetFlo w Feature Card NMP Netw ork Management Processor NSAP network service access point NTP Network T ime Protocol NVRAM non volatile RAM O A M Operation, ...

  • Cisco Systems 6500 - page 546

    A-6 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Appendix A Acronyms RIB routing information base RIF Routing Information Field RMON remote network monit o r R OM read-only memory R OMMON R OM monitor RP route processor or rendezv ous point RPC remote procedure call RPF rever se path forwarding R ...

  • Cisco Systems 6500 - page 547

    A-7 Catalyst 6500 Series Switch Cisco IOS So ftware Configuration Guide—Release 12.1 E 78-14099-04 Appendix A Acronyms TCAM T ernary Content Addressable Memory TCL table contention lev el TCP/IP Tran smission Control Protocol/ Internet Protocol TFTP T rivial File T ransfer Protocol TIA T elecommunications In dustry As sociation T opN Utility that ...

  • Cisco Systems 6500 - page 548

    A-8 Catalyst 6500 Series Switch Cisco IOS So ft ware Configuration Guide—Release 12.1 E 78-14099-04 Appendix A Acronyms ...

  • Cisco Systems 6500 - page 549

    IN-1 Catalyst 6500 Series Switch Cisco IOS So ftware Configuration Guide—Release 12.1 E 78-14099-04 INDEX Numerics 4K VLANs (support for 4,0 96 VLANs) 2 802.10 SAID (default) 6 802.1Q encapsulation 4 Layer 2 protocol tunneli ng See Layer 2 protocol tu nneling mapping to ISL VLANs 12 trunks 2 restrictions 6 tunnelin g configuration guid elines 4 c ...

  • Cisco Systems 6500 - page 550

    Index IN-2 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 blocking stat e, STP 8 boot bootldr command 26, 27 boot command 22 boot config command 26 BOOTLDR environment variable (example) 27 configuring 27 description 25 setting 27 boot loader image 25, 27 boot system command 21, 26 boot system flas ...

  • Cisco Systems 6500 - page 551

    Index IN-3 Catalyst 6500 Series Switch Cisco IOS So ftware Configuration Guide—Release 12.1 E 78-14099-04 clearing IPX MLS cache entries 13 clear interface command 19 clear ip route command IP MLS restiction 6 clear ipx route command IPX MLS restiction 5 clear mls command clearing IP MLS cache entries 12 clear mls ip multicast statistics command ...

  • Cisco Systems 6500 - page 552

    Index IN-4 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 IP MMLS 7 IPX MLS 5 supervisor engine 1 UDLD 3 voice VLAN 4 VTP 5 default ga teway, con figuring 12 default NDE configuration 7 default VLAN 10 denial of service p rotection 1 description co mmand 16 destination flow mask 3 destination-ip f l ...

  • Cisco Systems 6500 - page 553

    Index IN-5 Catalyst 6500 Series Switch Cisco IOS So ftware Configuration Guide—Release 12.1 E 78-14099-04 interface port-channel (command) 7 lacp system-priority command example 10 Layer 2 configuring 8 load balanc ing configuring 11 understanding 5 modes 3 PAgP Understanding 3 port-channel interfaces 5 port-channel load-balance command 10, 11 co ...

  • Cisco Systems 6500 - page 554

    Index IN-6 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 frame distribution See EtherChannel load balancing G gateway, co nfiguring 12 global confi guration mode 5 global parameters, configu ring 3 H hardware Layer 3 switching guidelin es 4 hello tim e, STP 32 history CLI 3 I I-BPDU 16 ICMP unreach ...

  • Cisco Systems 6500 - page 555

    Index IN-7 Catalyst 6500 Series Switch Cisco IOS So ftware Configuration Guide—Release 12.1 E 78-14099-04 range of 4 restarting 19 shutting down task 19 interfaces command 1, 2 interfaces range command 4 interfaces range macro command 6 Interior Gateway Routi ng Protocol See IGRP, configuring Internal Sub Tree Protocol See ISTP 15 Internet Group ...

  • Cisco Systems 6500 - page 556

    Index IN-8 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 completely and partially swi tched 4 Layer 3 MLS cache 2 overview 2 packet rewrite 3 router displaying interface in formation 14 enabling globally 10 enabling on interfaces 11 multicast routing table, displaying 16 PIM, enabling 10 switch sta ...

  • Cisco Systems 6500 - page 557

    Index IN-9 Catalyst 6500 Series Switch Cisco IOS So ftware Configuration Guide—Release 12.1 E 78-14099-04 J join messages, IGMP 2 jumbo frames 10 K keyboard shortcuts 3 L LACP system ID 4 Layer 2 configuring interfaces 7 access port 14 trunk 8 defaults 5 interface modes 4 show interfaces 13, 14, 7, 13 switching understanding 1 trunks understandin ...

  • Cisco Systems 6500 - page 558

    Index IN-10 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 mls flow ipx command configuring IPX MLS flow mask 8 mls ip multicast command enabling IP MMLS 11, 12, 13, 14 mls ipx command enabling IPX MLS on a router interface 6 mls nde flow command configuring a host and port filter 16 configuring a h ...

  • Cisco Systems 6500 - page 559

    Index IN-11 Catalyst 6500 Series Switch Cisco IOS So ftware Configuration Guide—Release 12.1 E 78-14099-04 overview 1 specifying destination host filt ers 16 destination TCP/UDP port filt ers 16 protocol filt ers 16 NDE configuration, default 7 NetFlow Data Export See NDE Network-Based Application Reco gnition 1 network fault tolerance 15 network ...

  • Cisco Systems 6500 - page 560

    Index IN-12 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 initializin g authenti cation of a client 11 manual reauthen tication of a client 11 quiet period 11 RADIUS server 10 RADIUS server parameters on the switch 8 switch-to-authen tication-server retransmission time 13 switch-to-client EAP-reque ...

  • Cisco Systems 6500 - page 561

    Index IN-13 Catalyst 6500 Series Switch Cisco IOS So ftware Configuration Guide—Release 12.1 E 78-14099-04 isolated VLANs 2 ports community 1 isolated 1 promiscuous 1 primary VLANs 2 secondar y VLANs 2 trunks 2 privileged EXEC mode 5 privileges changing default 18 configuring multiple levels 17 privilege level 18 exiting 19 logging in 18 procedur ...

  • Cisco Systems 6500 - page 562

    Index IN-14 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 DSCP markdown values 25, 68 DSCP values to CoS values 67 IP precedence values to DSCP values 67 QoS markdown 19 QoS marking 24 definition 4 trusted ports 13 untrusted ports 13 QoS MSFC marking 9 QoS multilayer switch feature card 12 QoS OSM ...

  • Cisco Systems 6500 - page 563

    Index IN-15 Catalyst 6500 Series Switch Cisco IOS So ftware Configuration Guide—Release 12.1 E 78-14099-04 redundancy (RPR+) 1 configuring 6 configuring superviso r engine 5 displaying supervisor engine config uration 8 redundancy command 6, 7 route processor redu ndancy plus 2 redundancy command 3 related documentation 23 reload command 23 reser ...

  • Cisco Systems 6500 - page 564

    Index IN-16 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 show ciscoview version comma nd 3 show configuration command 16 show debugging command 3 show eobc com mand 18 show hardw are command 3 show history co mmand 4 show ibc command 18 show interfaces command 2, 13, 14, 16, 18, 7, 13 clearing int ...

  • Cisco Systems 6500 - page 565

    Index IN-17 Catalyst 6500 Series Switch Cisco IOS So ftware Configuration Guide—Release 12.1 E 78-14099-04 configuring 8 destinations 10 sources 9 VLAN filterin g 10 overview 1 spanning-tree ba ckbonefast command 13, 14 command example 13, 14 spanning-tree cost command 29 command example 29, 30 spanning-tree portfast command 8, 9 command example ...

  • Cisco Systems 6500 - page 566

    Index IN-18 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 and MST 16 configuring 13 figure adding a switch 7 spanning-tree ba ckbonefast command 13, 14 command example 13, 14 understanding 4 STP BPDU Guard and MST 16 configuring 11 spanning-tree portfast bpdu-guard command 11 understanding 2 STP br ...

  • Cisco Systems 6500 - page 567

    Index IN-19 Catalyst 6500 Series Switch Cisco IOS So ftware Configuration Guide—Release 12.1 E 78-14099-04 switchport trunk allowed vlan 11 switchport trunk encapsulation 9 switchport trunk encapsulation dot1q 4 example 13 switchport trunk encapsulation isl 4 switchport trunk encapsul ation negotiate 4 default 5 switchport tr unk native vlan 11 s ...

  • Cisco Systems 6500 - page 568

    Index IN-20 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 See STP UplinkFast URD 10 user EXEC mode 5 V VACLs 8 configuring 11 examples 16 Layer 3 VLAN interfaces 15 Layer 4 port operat ions 3 logging configuration example 18 configuring 17 restrictions 18 MAC address based 12 multicast packets 11 o ...

  • Cisco Systems 6500 - page 569

    Index IN-21 Catalyst 6500 Series Switch Cisco IOS So ftware Configuration Guide—Release 12.1 E 78-14099-04 client 2 server 2 transparent 2 monitoring 10 overview 1 pruning configuration 12 configuring 7 overview 3 server, configuring 8 statistics 10 transparent mode, configu ring 8 version 2 enabling 7 overview 3 W WCCP configuring on a router 2, ...

  • Cisco Systems 6500 - page 570

    Index IN-22 Catalyst 6500 Series Switch Cisco IOS Softw are Configuration Guide—Release 12.1 E 78-14099-04 ...

Manufacturer Cisco Systems Category Switch

Documents that we receive from a manufacturer of a Cisco Systems 6500 can be divided into several groups. They are, among others:
- Cisco Systems technical drawings
- 6500 manuals
- Cisco Systems product data sheets
- information booklets
- or energy labels Cisco Systems 6500
All of them are important, but the most important information from the point of view of use of the device are in the user manual Cisco Systems 6500.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Cisco Systems 6500, service manual, brief instructions and user manuals Cisco Systems 6500. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Cisco Systems 6500.

A complete manual for the device Cisco Systems 6500, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Cisco Systems 6500 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Cisco Systems 6500.

A complete Cisco Systems manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Cisco Systems 6500 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Cisco Systems 6500, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Cisco Systems 6500, that we can find in the current document
3. Tips how to use the basic functions of the device Cisco Systems 6500 - which should help us in our first steps of using Cisco Systems 6500
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Cisco Systems 6500
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Cisco Systems 6500 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Cisco Systems 6500?

Use the form below

If you did not solve your problem by using a manual Cisco Systems 6500, ask a question using the form below. If a user had a similar problem with Cisco Systems 6500 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)