-
Canon A520 - page 1
ENGLISH z Please read the Read This First section (p. 4). z Please also see the Canon Digital Camera Software S tarter Guide Disk and the Direct Pr int User Guide . Camera User Gui de DIGIT AL CAMERA Camera User Guide CEL-SE88A210 © 2004 CANON INC. PRINTED IN THE EU CANON INC. 30-2 Shim omaruko 3- chome, Oh ta-ku, T okyo 146- 8501, Japa n Europa, ...
-
Canon A520 - page 2
161 Appendix 161 Disclaimer • While every effort has been made to ensure that the information contained in this guide is accurate and complete, no liability can be accepted for any errors or omissions. • Canon reserves the right to change the specifications of the hardware and software described herein at any time without prior notice. • No p ...
-
Canon A520 - page 3
1 Flowchart and Reference Guides This Guide Shooting with the Cam era Canon Digital Camera Software Starter Guide Disk Installing the Software This Guide Connecting the Camera to a Computer Canon Digital Camera Software Starter Guide Disk Direct Print User Guide Printer User Guide Using the Printer and Printing Downloadin g Images to a Computer Thi ...
-
Canon A520 - page 4
2 Table of Contents Items marked with are lists or charts that summarize camera functions or procedures. Read This First 4 Please Read .. .................................................... 4 Safety Precautions ............................................ 6 Preventing Malfunctions .................................. 11 Components Guide 12 Prepa ...
-
Canon A520 - page 5
3 Table of Content s Using the Mode Dial (Creative Zone) .............. 76 Program AE ........................................ 77 Setting the Shutter Speed .................. 77 Setting the Aperture ........................... 79 Manually Settin g the Shut ter Sp eed and Ap erture .. 80 Switching between Focusing Modes ............... 81 Switching ...
-
Canon A520 - page 6
4 Read This First Please Read Test Shots Before you try to photograph important subjects, we highly recommend that you shoot several trial images to confirm that the camera is operating and being operated corr ectly. Please note that Canon Inc., its subsidiaries and affiliates, and its distributors ar e not liable for a ny consequent ial damages ar ...
-
Canon A520 - page 7
5 Read This First If your camera is used for prolonged periods, t he came ra body may become warm. Please be aware of this and take care when operating the camera for an extended period. The LCD monitor is produced with extremely high-precision manufactu ring techniques. More than 99.99% of the pixels operate to specification. Less than 0.01% of th ...
-
Canon A520 - page 8
6 Read This First Safety Precautions z Before using the camera, please ensure that you read and understand the safety precautions described below. Always ensure that the camera is operated co rrectly. z The safety precautions noted on the following pages are intended to instruct yo u in the safe and correct operation of the camera an d its accessor ...
-
Canon A520 - page 9
7 Read This First z Do not attempt to disassemble or alter any part of the equipment that is not expressly described in this guide. Disassembly or alteration may result in high- voltage electrical shock. Internal inspections, alterations and repairs should be conducted by qualif ied service personnel authorized by your camera distributor or a Canon ...
-
Canon A520 - page 10
8 Read This First z Remove the power cord on a regular periodic basis and wipe away the dust and dirt that collects on the plug, the exterio r of the power outlet and the surrounding area. In dusty, humid or gre asy environments, the dust that collects around the plug ov er long periods of time may b ecome saturated with humidity and short-ci rcuit ...
-
Canon A520 - page 11
9 Read This First z Before you discard a bat tery, cover the terminals with tape or o ther insulators to prevent direct contact with other object s. Contact with the metallic components of other materials in waste containers may lead to fire or explos ions. Discard the b atteries in specia lized waste facilities if available in your area. z Use onl ...
-
Canon A520 - page 12
10 Read This First CAUTIONS z Avoid using, placing or storing the equipm ent in places subject to stron g sunlight or high temperatures, such as the dashboard or trunk (b oot) of a car. Exposure to intense sunlig ht and heat may cause the batteries to leak, ov erheat or explode, resulting in fire, burns or other injurie s. High temperatures may als ...
-
Canon A520 - page 13
11 Read This First Preventing Malfunctions Avoid Strong Magnetic Fields Never place the camera in close proximity to electric motors or other equipment g enerating strong electromagnetic fields. Exposure to strong magnetic fields may cause ma lfunctions or co rrupt image data. Avoid Condensation Related Problems Moving the equipment rapidly between ...
-
Canon A520 - page 14
12 Components Guide The following cables are u sed to connect the camera to a co mputer or prin ter. Computer (p. 106) Interface Ca ble IFC-40 0PCU (supplie d with the ca mera) Direct Prin t Compatible Printers (sol d separate ly) • Compact Photo Pri nters (SELPH Y CP series ), Card Ph oto Printe rs: Inte rface Cable IFC-400PCU (supplied with the ...
-
Canon A520 - page 15
13 Components Guide Preparing the Camera, Basic Function * 1 When carrying the camera by the str ap, be careful not to swing the camera or ca tch it on other items. * 2 The LCD monitor is covered with a thin plastic sheet for protection aga inst scratches during shipment. Remove it before using the camera. The followin g operations are ac cessible ...
-
Canon A520 - page 16
14 Components Guide Shooting Mode Dial Use the shooting mode dial to switch between the Shooting modes. z : Auto (p. 33) The camera automatically selects settings. z Image Zone The camera automatically selects settings according to the image composition type. : Portrait (p. 38) : Landscape ( p. 38) : Night Scene (p. 38) : Fast Shutter (p . 38) : Sl ...
-
Canon A520 - page 17
15 Preparing the Camera, Basic Function Preparing the Camera Installing the Batteries Insert two AA-size alkali ne batteries (supplied with the camera) or separately sold nickel metal hydride (NiMH) batteries. 1 Be sure that the camera power is off. 2 Slide the battery cover lock in the direction of the arrow, and open the cover. 3 Insert the batte ...
-
Canon A520 - page 18
16 Preparing the Camera Proper Battery Handling z Use AA-size alkaline or Canon AA-size NiMH batteries (sold separately) only. For information on handling the AA-size rechargeable NiMH batteries, see Using Rechargeable Batteries (p. 129). z Since the performance of a lkaline batteries may differ according to brand, the operating time of the batteri ...
-
Canon A520 - page 19
17 Preparing the Camera Preparing the Camera, Basic Function WARNING Never use damaged batteries or batteries whose outer seal is completely or par tially missing or peeled off, as there is risk that such batteries may leak, overheat, or burst. Always check the seals on store-bought batteries before loading them, as some batteries may come with def ...
-
Canon A520 - page 20
18 Preparing the Camera Installing the Memory Card 1 Be sure that the camera is turned off. 2 Slide the memory card slot cover in the direction of the arrow, and open it. 3 Insert the memory card. z Push the memory card in until it clicks into place. z Do not touch or allow metal objects to contact the terminals on the back of the memory card. To r ...
-
Canon A520 - page 21
19 Preparing the Camera Preparing the Camera, Basic Function z When the upper indicator bl inks green, the camera is writing, re ading, erasin g or transmitting an image to or fr om the memory card. Do not perform th e following or image data may be lost or corrupted: • Subject the ca mera body to v ibration or shocks. • Turn the camera’s po ...
-
Canon A520 - page 22
20 Preparing the Camera 3 Select (Format) using the or button and press the SET button. 4 Select [OK] using the or button and press the SET button. z To cancel formatting instead, select [Cancel] and press the SET button. z The capacity of the memory card d isplayed on the LCD monitor when formatting is less than the rated capacity of the memory ca ...
-
Canon A520 - page 23
21 Preparing the Camera Preparing the Camera, Basic Function Memory Card Handling Precautions z Memory cards are high-precision electronic devices. Do not bend them, apply force to them, or subject them to shocks or vibration. z Do not attempt to disassemble or alter the memory card. z Do not allow dirt, water or foreign objects to contact the term ...
-
Canon A520 - page 24
22 Preparing the Camera Setting the Date/Time The Set Date/Time menu will appear the first time the camera power is turned on, or whenever the lithium date battery charge is low. Start from Step 4 to set the date and time. 1 Turn the power on (p. 30 ). 2 Press the MENU button and select the [ (Set up)] menu using the button. 3 Press the or button t ...
-
Canon A520 - page 25
23 Preparing the Camera Preparing the Camera, Basic Function Setting the Language Use this feature to select the language for the LC D monitor display. 1 Turn the power on (p. 30 ). 2 Press the MENU button and select the [ (Set up) ] menu using the button. 3 Select (Language) usin g the or button and press the SET button. 4 Select a language using ...
-
Canon A520 - page 26
24 Preparing the Camera Using the LCD Monitor The LCD monitor can be used to compose images while shoo ting, adjust menu settings and play back recorded images. Pressing the DISP. button switches the LCD monitor display mode. Shooting Mode When the shutter button is pressed halfway, the AF frame will display as follows (when the LCD monitor is on). ...
-
Canon A520 - page 27
25 Preparing the Camera Preparing the Camera, Basic Function Icons Displayed in Shooting Mode Shooting Mode p. 38, 76 Exposure Compensatio n p. 83 White Balanc e p. 84 Drive Mode p. 45, 48 ISO Speed p. 87 Photo Effect p. 88 Metering Mo de p . 82 Compression p. 40 Resolutio n Postcard Print p. 40, 54 Flash p. 42 Red-eye Reduct ion p. 43 Macro Mode p ...
-
Canon A520 - page 28
26 Preparing the Camera z A slow shutter speed has likely been selected because of insufficient lighting if the upper indicator blinks orange after the metering preparations are complete and the camera shake icon ( ) displays in the LC D monitor. Set the flash to or , or affix the camera to a tripod to shoot. z After you shoot an image by fully pre ...
-
Canon A520 - page 29
27 Preparing the Camera Preparing the Camera, Basic Function Playback Mode * Detailed Display is not available in Index Playback (9 images). Total number of images Standard No Display Detailed* Shooting Date/Time File Numb er Aperture Value Shutter Spee d Movie Length Histogram Compress ion p. 40 Resolutio n (Still imag e) p. 40 Sound memo (WAVE fi ...
-
Canon A520 - page 30
28 Preparing the Camera Icons Displayed in Playback Mode (Detailed Display) In addition to the above, the shutter speed, aperture value, histogram and recorded movie time are displayed as in the example in the figure on page 27. * 1 Each mode of the SCN mode icon appears (p. 51). * 2 appears even in No Display mode. Shooting Mo de p. 38, p. 76 Expo ...
-
Canon A520 - page 31
29 Preparing the Camera Preparing the Camera, Basic Function z Please note that image i nformati on recorded by th is camera may not displa y correctl y on other camera s and image information recorded by other camera s may not displa y correctl y on this camer a. About the Hi stogram z The histogr am is a graph tha t allows you to judge the brig h ...
-
Canon A520 - page 32
30 Basic Functions Turning the Power On/Off Turning the Camera On 1 Press the Power button un til the power lamp lights green (p. 14). Shooting Mode z Current shooting settings will appear in the LCD monitor. Playback Mode z The LCD monitor displays an image. Current shoo ting setti ngs will dis appear in approximat ely 6 seconds wh en the LCD moni ...
-
Canon A520 - page 33
31 Basic Functions Preparing the Camera, Basic Function Power Saving Function This camera is equipped with a power saving function. Depending on the power saving setting, the camera may power down or the LCD monitor may go off automatically. z Auto Power Down [On]: Shooting mod e: Powers down approximately 3 minutes after the last time a camera con ...
-
Canon A520 - page 34
32 Basic Functions Switching between Shooting and Playback You can quickly switch between Shooti ng mode and Playback mode. This is convenient when you wish to shoo t again after checking or erasing an image immediately after it is shot. Shooting Mode Playback Mode The lens does not retract for approximatel y 1 minute a fter the camera switche s to ...
-
Canon A520 - page 35
33 The Basics Shooting – The Basics Auto Mode In this mode, all you have to do is press the shutter button and let the camera do everything else. 1 Check that the camera is in Shooting mode (p. 32). 2 Turn the shooting mode dial to . 3 Aim the camera at the subject yo u wish to shoot. See Functions Available in Each Shooting Mode (p. 159) at the ...
-
Canon A520 - page 36
34 Shooting – The Basics Pressing Halfway Pressing halfway automatically sets the exposure and focus. z Two beeps will sound when the camera has finished metering, and the upper indicator will light green or orange. If the LCD monitor is on, the AF frame will appear green. z The lower indicator will blink yellow and the beep will sound one time i ...
-
Canon A520 - page 37
35 Shooting – The Basics The Basics Shooting with the Viewfinder You can save power by turning the LCD monitor o ff (p. 24) and using the viewfinder to shoot. 1 Compose the image so that the subject appears in the cente r of the frame in the viewfinder (autofocus r ange). Viewfinder wi ndow Shows approxi mate center of the im age About the Aut of ...
-
Canon A520 - page 38
36 Shooting – The Basics AF-assist Beam z The AF-ass ist beam will some times emit when the shut ter button i s pressed ha lfway to assist fo cusing in c ertain condi tions, i.e. dark condi tions. z The AF-ass ist beam can b e turned of f (p. 69). For exampl e, if animals are your sub ject, turn off th e beam when shoo ting in the dar k to avoid ...
-
Canon A520 - page 39
37 Shooting – The Basics The Basics Changing the Image Display Duration The image review time can be set to [Off], any time in the range of 3 to 10 seconds, or [Hold]. 1 Press the MENU button. z The [ (Rec.)] menu appear s. 2 Select (Review) using the or button. 3 Select a duration setting using the or button and press the MENU button. z With the ...
-
Canon A520 - page 40
38 Shooting – The Basics Using the Mode Dial (Image Zone) Settings fitting the shooting conditions of yo ur subject can easily be set using the shootin g mode dial. Fast Shutter Use this mo de to shoot fast moving objects. Landscape Use this mo de to shoot landsc ape scenes. Night Scene Use this mo de to captu re human subjects against the backdr ...
-
Canon A520 - page 41
39 Shooting – The Basics The Basics 1 Turn the shooting mode dial and set the icon of the mode you wish t o use to . z Shooting procedures are the same as for the mode (p. 33). and Shooting Modes Always use a tri pod to prevent camer a shake. z See page 159 for setting s that can be changed i n each mode . z Tips for each func tion: Portrait Mod ...
-
Canon A520 - page 42
40 Shooting – The Basics Changing the Resolution and Compression You can change the resolution and compression (excluding movies) depe nding on the purpose. Mode Dial * The Postcard Pr int mode is not availabl e in and . Resolution Purpose L (Large) PowerShot A5 20: 2272 x 1704 pi xels High Low z Print larger than A4 size* 210 x 297 mm (8.3 x 11. ...
-
Canon A520 - page 43
41 Shooting – The Basics The Basics 1 Press the FUNC. button. 2 Select L* using the or button. * Th e current s etting is displayed. 3 Select the resolution you wish to set usi ng the or button. Example: PowerShot A5 10 Excluding Number of recordable images (Only displa yed when the resoluti on or compressio n is selected) 4 Press the SET button. ...
-
Canon A520 - page 44
42 Shooting – The Basics Using the Flash Use the flash according to the guidelines below. 1 Press the button to switch be tween flash modes. z The selected flash mode appears on the LCD monitor. Mode Dial * In (Fireworks), the flash is prohibite d. Auto with red-eye reduction The flash fi res automati cally as required b y the lighting level, and ...
-
Canon A520 - page 45
43 Shooting – The Basics The Basics z When shootin g in any mode other t han M mode, the flas h fires with automa tic adjustments . z The flash f ires twice. A pre-flash will fire an d will be followe d by the main flas h. The pre- flash is use d by the camer a to obtain the subject’ s exposure dat a so that the mai n flash can be set to the op ...
-
Canon A520 - page 46
44 Shooting – The Basics z Red-eye Reduct ion For this mode to be effec tive, the subjec t must be looking right at the r ed-eye reduction lamp. Try ask ing them to look directly at the la mp. Even bett er resul ts can be obtained b y shooting wit h the lens set to a wide angle, increasi ng the light ing in indoor set tings or ap proaching c lose ...
-
Canon A520 - page 47
45 Shooting – The Basics The Basics 3 Shoot the image. z The lower indicator will light yellow when the shutter button is pressed halfway. z Shooting procedures are the same as for the Mode (p. 33). z Always us e the LCD monit or to compos e images in macr o mode. Shooting wi th the viewfinder is possible, ho wever, part of the image may not ap p ...
-
Canon A520 - page 48
46 Shooting – The Basics z When is selected, pressing the SET button will allow you to set the start time (0 to 10 seconds) and the number of shots (1 to 10 shots). Select the setting item using the or button and change its value u sing the or button. 3 Shoot the image. z When is selected, the self-timer lamp starts blinking when the shutter butt ...
-
Canon A520 - page 49
47 Shooting – The Basics The Basics Digital Zoom Images can be zoomed with the combined optical and digital zoom functions as fol lows. PowerShot A520: Approx. 5.7x, 7.1x, 8.9x, 11x and 14x PowerShot A510: Approx. 5.1x, 6.4x, 8.0x, 9.8x and 13x 1 Press the DISP. but ton to turn the LCD monitor on. 2 In the [ (Rec.)] menu, select (Digital Zoom). z ...
-
Canon A520 - page 50
48 Shooting – The Basics Continuous Shooting Use this mode to sh oot successive shots while the shutter button is pressed . z Continuous shooting speed is as follows*. * Large/Fine mode with LCD monitor off ( These figures reflect Canon’s testing standard. The fi gures will vary depending on the subject and shoo ting conditions. ) 1 Press the F ...
-
Canon A520 - page 51
49 Shooting – The Basics The Basics Shooting Panoramic Images (Stitch Assist) Stitch Assist can be used to shoot overlapping images that can later be merge d (stitched) to create one p anoramic image on a computer. Mode Dial To merge the images on a computer, use PhotoStitc h, one of th e supplied s oftware programs. Framing a Subject The PhotoSt ...
-
Canon A520 - page 52
50 Shooting – The Basics Shooting Images can be shot in the follow ing 2 sequences in Stitch Assist mode. 1 Turn the Shooting mode dial to . z The LCD monitor will turn on. 2 Select the shooting sequenc e using the or button and press the SET button. z The shooting sequence is set. z To shoot land scapes, swiv el (pan) th e camera arou nd its own ...
-
Canon A520 - page 53
51 Shooting – The Basics The Basics z A custom white balance setting (p. 85) c annot be set in mode. To use a custom white balance setting, first set it in another Shooting mode. z The settin gs in place for the first image are locked in an d cannot be ch anged for subsequent shots. z A TV cann ot be used as the monitor for shooting in this mode. ...
-
Canon A520 - page 54
52 Shooting – The Basics 1 Turn the shooting mode dial to (Special Scene mode). z The current Scene mode screen is displayed. 2 Select the scene you wish to shoot using the or button and shoot the image. z The name of the Scene mode is displayed for approximately six seconds each time you change the mode. Indoor Prevents ca mera shake and maintai ...
-
Canon A520 - page 55
53 Shooting – The Basics The Basics z In mode, the shut ter speed slows down . Use a tripod to avoid ca mera shake. z In , , and modes, the I SO speed may inc rease and cause noise in the i mage. z In mode, shoot subjec ts in t he following range: 1 to 5 m (3.3 to 16 ft.) (tel ephoto e nd) or 1 m (3.3 ft.) – infinity (other zoomin g positions ) ...
-
Canon A520 - page 56
54 Shooting – The Basics Postcard Print Mode You can shoot images with the optimal resolution and compression for postcard size printing. • When printing standard image data to postcard size, sometimes the top and bottom sides may not get printed. • By shooting images in the Postcard Print mode, you can check the printing area (vertical/ hori ...
-
Canon A520 - page 57
55 Shooting – The Basics The Basics Embedding the Date in the Image Data You can embed the date on image data when (Postcard Print mode) is selected. The date will be printed on your images even if it has not been set with a computer or printer. z Ensure that the camera’s date/time is set beforehand (p. 22). z You cannot embed the date on image ...
-
Canon A520 - page 58
56 Shooting – The Basics Movie Mode Use this mode to shoot movies. T he resolution can be set to [ (640 x 480)], [ (320 x 240)] or [ (160 x 120)] (p. 40). 1 Turn the shooting mode dial to . z The LCD monitor turns on and displays the maximum recording time (in seconds). 2 Press the shutter bu tton all the way. z Shooting and sound recording start ...
-
Canon A520 - page 59
57 Shooting – The Basics The Basics z You are recommende d to use a memory card that ha s been format ted in your camera to shoot movie s (p. 19). The card supplied wit h the camera may be u sed without further formatting. z Be careful not to to uch the micropho ne while shootin g. z During shoot ing, do not pr ess any but ton other than the shut ...
-
Canon A520 - page 60
58 Playback – The Basics Displaying Images Individually (Single Image Playback) You can view the recorded images on the LCD monitor. 1 Slide the mode switch to . z The last recorded image appears (single image playback). 2 Move between images using the or button. z Use the button to move to the previous image and the button to move to the next. H ...
-
Canon A520 - page 61
59 Playback – The Basics The Basics Magnifying Images Images can be ma gnified up to ap proximately 10 times in single image playback. 1 Slide the mode switch to . 2 Press the zoom lever towa rd . z You can move around the magnified image using the , , or button. z Pressing the SET button switches to image advance mode. Press the or button to dis ...
-
Canon A520 - page 62
60 Playback – The Basics Viewing Images in Sets of Nine (Index Playback) Up to 9 images can be viewed at once in index playback. 1 Slide the mode switch to . 2 Press the zoom lever towa rd . z 9 images appear at once (index playback). 3 Change the image sele ction using the , , or button. Pressing t he button in th is row displays the previ ous s ...
-
Canon A520 - page 63
61 Playback – The Basics The Basics Jumping between Images The display can be advanced or set back 9 images in index pl ayback. 1 Press the zoom lever towa rd while in index playba ck (p. 60). z The jump bar appears. 2 Change the image selection. z Jump 9 images back or forward using the or button. z Pressing the or button while holding the SET b ...
-
Canon A520 - page 64
62 Playback – The Basics z When a movie has finis hed playing, it will display the last frame. If the SET button is pressed in this state, the camera will revert to the movie playback panel. If the SET button is pressed again, the movie will start playing from the first frame. Pausing and Resuming Play z Press the SET button to pause the movie. P ...
-
Canon A520 - page 65
63 Playback – The Basics The Basics 3 Select an editing method using the or button. z (Cut Beginning): Deletes frames from the beginning of the movie. z (Cut End) : Deletes frames from the end of the movie. z (Exit): Reverts to the movie playback panel. 4 Select the range you wish to delete using the or button. 5 Select (Play) using the or button ...
-
Canon A520 - page 66
64 Playback – The Basics z Protected movies and mov ies with an original length of les s than one secon d cannot be edited (p. 97 ). z It may take approximatel y 3 minute s to save an edited mo vie. If the ba ttery runs ou t partway th rough, edit ed movie cli ps cannot be saved. When editing movie s, it is recommended t o use new AA size al kali ...
-
Canon A520 - page 67
65 The Basics Erasing Erasing Images Individually 1 Slide the mode switch to . 2 Select the image you wish to erase using the or button and press the button. z A confi rmation screen appears. 3 Select [Era se] usi ng the or button and press the SET button. z To cancel instead of erasing, select [Cancel] and press the SET button. Please no te that e ...
-
Canon A520 - page 68
66 Shooting – Advanced Functions Selecting Menus and Settings Selecting Settings with the FUNC. Button (Shooting Mode Only) 1 Slide the mode switch to . 2 Press the FUNC. button. 3 Use the or button to select a FUNC. menu item. 4 Use the or button to select the settin g contents. 5 Press the FUNC. button. 6 Shoot the image . 5. 2. 1. Items in ( ) ...
-
Canon A520 - page 69
67 Shooting – Advanced Functio ns Advanced Functions Selecting Settings with the MENU Button z For items with [...] next to them, press the SET bu tton and select the settings from the next displayed menu. Once the settings are complete, press the SET button again to enable the new sett ings. z In the Shooting mode, you can also close the men u b ...
-
Canon A520 - page 70
68 Shooting – Ad vanced Functions z Some menu items may not be av ailable for selectio n according t o the Shoot ing mode (p. 159) . z You can appl y a desired image an d sound to and in the My Camera menu. For details, se e the Registering My Camera Settings (p. 118) or the Canon Digita l Camera Software Starter Guid e Disk . z The defaul t of a ...
-
Canon A520 - page 71
69 Shooting – Advanced Functio ns Advanced Functions Menu Settings and Default Settings Rec. Menu Menu Item Setting Content Reference Page AiAF Sets the camera so that it will either auto matically select th e AF frame and shoot, or shoot with th e AF frame f ixed in the ce nter. •O n * / O f f 81 Red-ey e Sets whet her or not th e red-eye redu ...
-
Canon A520 - page 72
70 Shooting – Ad vanced Functions Play Menu Set up Menu Menu Item Setting Content Reference Page Protect Protects ima ges from acci dental eras ure. 97 Rotate Rotates ima ges 90 or 270 d egrees clockw ise in the dis play. 94 Sound Memo A dds sound memos to images. 95 Erase All Erases a ll images fro m a memory card (ex cluding pr otected imag es) ...
-
Canon A520 - page 73
71 Shooting – Advanced Functio ns Advanced Functions Volume Adjusts the v olume of the star t-up sound , operati on sound, self -timer sound, shu tter so und, or pl ayback s ound afte r pressi ng the SET button. The volume canno t be adjust ed if [Mute] is set to [On] . – Start-up Vol. Adjusts th e Start-up Sou nd volume wh en the camera powers ...
-
Canon A520 - page 74
72 Shooting – Ad vanced Functions Power Saving The [Auto Power Down] and [Di splay Off] se ttings can be set by press ing the SET button. Auto Power Down Sets whether or not the ca mera automatica lly powers down af ter a specified p eriod of time ela pses without camera operat ion. • On* /Off 31 Display Off Specifies a period of t ime before t ...
-
Canon A520 - page 75
73 Shooting – Advanced Functio ns Advanced Functions Language Sets the lang uage used in the menus and messa ges on the LCD moni tor. You can also cha nge the langua ge in Pla yback mode by holdi ng the SET button and pr essing the MENU button. 23 Video System Sets the vide o output sign al standar d. •N T S C •P A L 115 Menu Item Setting Con ...
-
Canon A520 - page 76
74 Shooting – Ad vanced Functions Customizing the Camera (My Camera Settings) You can select the theme, start-up image and sound, op eration sound, self-timer sound and shutter sound used on this camera. These are called My Camera settings. You can also customize the and options for each item with images recor ded on the me mory card and newly re ...
-
Canon A520 - page 77
75 Shooting – Advanced Functio ns Advanced Functions Resetting the Settings to Default You can reset the menu and button ope ration settings to default. 1 Turn the power on. z Can be performed from Shooting or Playback mode. 2 Press the MENU button for longer than 5 seconds. z The message “Reset settings to default?” appears on the LCD monito ...
-
Canon A520 - page 78
76 Shooting – Ad vanced Functions Using the Mode Dial (Creative Zone) You can freely select camera settings such as the shutter speed and aperture value to suit your shooting purposes. After settings are made, shooting procedures are the same as for the mode (p. 33). How to Use the Mode Dial 1 Check that the camera is in Shooting mode. 2 Turn the ...
-
Canon A520 - page 79
77 Shooting – Advanced Functio ns Advanced Functions Program AE Use the program AE mode to have the camera automatically set the shutter speed and aperture value to match the brightness of the scene. z The shutter speed and aperture value will show in red on the LCD monitor when the correct exposure cannot be obtained. Use the following methods t ...
-
Canon A520 - page 80
78 Shooting – Ad vanced Functions z Please note tha t camera shake be comes a factor at slow shutter speeds . If the camera shake warnin g appears on the LCD monitor, secur e the camera t o a tripod before sho oting. z The apertur e value and sh utter spe ed change accor ding to th e zoom state as follows. z The fastest shutter s peed for flas h ...
-
Canon A520 - page 81
79 Shooting – Advanced Functio ns Advanced Functions Setting the Aperture The aperture adjusts the amount of light th at passes through the lens. When you set the aperture in the aperture-priority AE mode, the camera automatically selects a shut ter speed to match the brightness. Selecting a lower aperture value ( opening the aperture) allows you ...
-
Canon A520 - page 82
80 Shooting – Ad vanced Functions Manually Setting the Shutter Speed and Aperture You can manually set the shutter speed and aperture to shoot images. You can select settings such as a long exposure to suit your purpose. z When you press the shutter button halfway, the difference between the standard exposure* and the selected exposure appears on ...
-
Canon A520 - page 83
81 Shooting – Advanced Functio ns Advanced Functions Switching between Focusing Modes You can change the autofocus frame (AF frame) selection method. The AF frame will appear when the LC D monitor is turned on (p. 24). indicates the AF frame which appears on the LCD monitor 1 In the [ (Rec. )] menu, select (AiAF). z See Selecting Menus and Settin ...
-
Canon A520 - page 84
82 Shooting – Ad vanced Functions Switching between Metering Modes Mode Dial Evaluative Appropriat e for standar d shooting co nditions, including backlit sce nes. The camera divides image s into several zones for lig ht metering. It evaluates t he complex lig hting condition s, such as th e position of the subje ct, the bri ghtness, th e backgro ...
-
Canon A520 - page 85
83 Shooting – Advanced Functio ns Advanced Functions Adjusting the Exposure Adjust the exposure compensation setting to avoid making the subject too dark when it is backlit or shot agains t a bright background, or to avoid making lights appear too b right in night sh ots. 1 Select *( + / – (Exp.)) in the FUNC. menu . z See Selecting Menus and S ...
-
Canon A520 - page 86
84 Shooting – Ad vanced Functions Adjusting the Tone (White Balance) When the white balance is set to match the light source, the camera reproduces colors more accurately. Combinations of setting contents and light source are as follows. Mode Dial Auto Settings ar e automatica lly set by the camera Daylight For record ing outdoors on a bright day ...
-
Canon A520 - page 87
85 Shooting – Advanced Functio ns Advanced Functions 3 Press the FUNC. button. Setting a Custom White Balance You can set a custom white bal ance to obtain the optimal setting for the shooting conditions by having the came ra evaluate an object, such as a piece of white paper or cloth, or a photo-quality gray card that you wish to establish as th ...
-
Canon A520 - page 88
86 Shooting – Ad vanced Functions z You are recomme nded to set the white balance when sh ooting in the follow ing conditions . - The shooting mode dial is set to P and the exposur e compensat ion is set to ±0. The correct white balanc e may not be obtained wh en the exposur e is incorr ect (image is comple tely black or white). - The zoom is po ...
-
Canon A520 - page 89
87 Shooting – Advanced Functio ns Advanced Functions Changing the ISO Speed By raising the ISO speed, you can shoot bright images even in poor lighting conditions. This function is convenient when you want to prevent camera shake, shoot without the flash or shoot with a faster shutter speed in dark conditions. 1 Select *(ISO Speed) in the FUNC. m ...
-
Canon A520 - page 90
88 Shooting – Ad vanced Functions Changing the Photo Effect You can shoot with different saturation and contrast color effects. 1 Select *(Effect Off) in the FUNC. menu. z See Selecting Menus and Settings (p. 66). * Th e current s etting is displayed. Mode Dial Effect Off Records normally wi th this setting. Vivid Emphasize s the con trast and co ...
-
Canon A520 - page 91
89 Shooting – Advanced Functio ns Advanced Functions Adjusting the Flash Output In M mode, the flash output can b e controlled in three steps when shooting. 1 Select (Flash Output) in the FUNC. menu. z See Selecting Menus and Settings (p. 66). 2 Adjust the flash output using the or button. z A shot can be taken immediately by pressing the shutter ...
-
Canon A520 - page 92
90 Shooting – Ad vanced Functions Shooting Hard-to-Focus Subjects The autofocus may not work well on th e following types of subjects. To shoot these subjects, first aim the ca mera at an object at a similar distance, lock the focus and recompose the image with th e desired subject, or use man ual focus. Mode Dial z Subjects with extremely low co ...
-
Canon A520 - page 93
91 Shooting – Advanced Functio ns Advanced Functions z The focus will stay looked even if the shutter button and the MF button are released. z Pressing the MF button again cancels the AF lock setting. 2 Recompose the image and press the shutter butt on all the way to shoot the image . AF lock is not available in and modes. z When shootin g with f ...
-
Canon A520 - page 94
92 Shooting – Ad vanced Functions 2 Focus using the or button and shoot the imag e. z Adjust the focus using the or button until the image appears focused on the LCD monitor. z Pressing the MF button again cancels the manual focus mode. z You can use manua l focus in the macro focal dista nce 5 to 45 c m (2.0 in. to 1.5 ft.) at wide angle en d an ...
-
Canon A520 - page 95
93 Shooting – Advanced Functio ns Advanced Functions z This funct ion may not oper ate correc tly when the camer a is pointed st raight up or down. Check th at the arr ow is p ointing in the righ t directi on and if it is not, th en set the Auto Rot ate function to [ Off]. z Even if the A uto Rotate functio n is set to [On], the o rientation o f ...
-
Canon A520 - page 96
94 Playback – Advanced Functions Rotating Images in the Display You can rotate an image by 90° or 270° clockwise in the LCD monitor. 1 In the [ (Play)] menu, select (Rotate) and press the SET button. z See Selecting Menus and Settings (p . 66). 2 Press the or button to select the image to be rotated an d press the SET button. z The image cycles ...
-
Canon A520 - page 97
95 Playback – Advanced Functions Advanced Functions Attaching Sound Memos to Image In Playback mode (includin g single image playback and index playba ck), you can attach sound memos (up to 60 seconds) to an image. The sound data is saved in WAVE format. 1 Select (Sound Memo) in the [ (Play)] menu and press the SET button. z See Selecting Menus a ...
-
Canon A520 - page 98
96 Playback – Advanced Functions z You cannot at tach sound memo s to movies. z When the memory card ca pacity is full, a “Memory ca rd full” messag e appears an d recording will not be po ssible to th at card. z You cannot re cord or pla y back sound memos for image s that already ha ve an incompatibl e sound memo attache d. If you attempt t ...
-
Canon A520 - page 99
97 Playback – Advanced Functions Advanced Functions Protecting Images Use the protect feature to protect important images and movies from accidental erasure. 1 In the [ (Play)] menu, select (Protect) an d press the SET button. z See Selecting Menus and Settings (p . 66). 2 Select an image you want to protect usin g the or button and press the SET ...
-
Canon A520 - page 100
98 Various Functions About Printing Images shot with this camera can be printed using one of th e following methods. z You can easily print images stored in the memory card by connecting the camera to a dir ect print compatible printer* 1 wit h a cable and then pressing the camera’s button. z You can select images and specify the number of print ...
-
Canon A520 - page 101
99 Various Functions Various Functions Photo Lab Print setti ngs (DPOF Prin t Settings) ( p. 100) Image Transmi ssion Settin gs (DPOF Transfe r Order) (p. 104) Direct Prin t Compatible Printing J For details , see the Direct Print User Guide . J Also, refe r to your prin ter’s manual. Printers that Can Be Used with this Camera Canon Direct Pr ...
-
Canon A520 - page 102
100 Various Functions DPOF Print Settings You can select images on a memory card for printing and specify the number of print copies in adva nce using the camera. Th is is extremel y convenient for send ing the images to a photo developing service that supports DPOF, or for prin ting on a direct pr int compatible printer. Refer to the Direct Print ...
-
Canon A520 - page 103
101 Various Functions Various Functions z Select an image using the or button and specify the number of copies (up to 99) to be printed using the or button. Index playback (p. 6 0) z Select an image using the , , , or button and press the SET button to determine the selection. Use the or button to specify the number of copies (up to 99) to be print ...
-
Canon A520 - page 104
102 Various Functions 2 Select [M ark all] using the , , or button and press the SET button. 3 Select [OK] using the or button and press the SET button. z The display will return to the Print Order menu. 4 Press the MENU button. z The display returns to the Play menu. Press the MENU button again to go back to the Playback screen. z Images are pri n ...
-
Canon A520 - page 105
103 Various Functions Various Functions Setting the Print Style Set the print style after selecting the image to print. The following print settings can be selected. 1 In the [ (Play)] menu, select (Print O rder) and press the SET button. z See Selecting Menus and Settings (p. 66). Print Type Standard Prints on e image pe r page. Index Prints th e ...
-
Canon A520 - page 106
104 Various Functions 4 Press the MENU button. z Returns to the Print Order menu. Pressing the MENU button again returns to the Play menu. Press it again to go back to the Playback screen. z When [Print Typ e] is set to [Index], the [Date] and [File No.] ca nnot be se t to [On] at the same time. z Both [Date] and [File No.] can be set to [On] if [P ...
-
Canon A520 - page 107
105 Various Functions Various Functions 1 In the [ (Play)] menu, select (Transfer Order) and press the SET button. z See Selecting Menus and Settings (p . 66). 2 Select [Order] using the or button and press the SET button. z Selecting [Reset] will cancel all transfer order settings. 3 Select an image using the or button and press the SET button to ...
-
Canon A520 - page 108
106 Various Functions 3 Select [OK] using the or button and press the SET button. z The display returns to the Transfer Order menu. 4 Press the MENU button. z The display returns to th e Play menu. Pressing the MENU button again returns to the playback screen. z Images are transferre d in order fro m oldest to newest by the shooti ng date. z A maxi ...
-
Canon A520 - page 109
107 Various Functions Various Functions z Downloading from a Memo ry Card See Downloading from a Memory Card (p. 113) . z With this method, you download images using camera button operations after you have installed the appropriate software (the computer settings only need to be adjusted for the first download). See Connecting the Camera to a Compu ...
-
Canon A520 - page 110
108 Various Functions z Macintosh OS Mac OS X (v10.1.5 – v10. 3) Computer Model The above OS shoul d be pre-insta lled on computers wi th built-in U SB ports. CPU PowerPC G3/G4/ G5 RAM 256 MB or more Interface U SB Free Hard Disk Spa ce z Canon Utilities ImageBrowse r: 200 MB or more PhotoStit ch: 40 MB or more z ArcSoft Photo Studio: 50 MB or mo ...
-
Canon A520 - page 111
109 Various Functions Various Functions 1 Install the driv er and the soft ware applications bundled on the Canon Digital Camera Solution Disk (first time only). z Please see the Canon Digital Camera Software Starter Guide Disk for the installation procedures. z With a Macintosh, it is next necessary to set the ImageBrowser auto start settings. Ple ...
-
Canon A520 - page 112
110 Various Functions 5 Select [Canon CameraWindow] in the event dialog tha t appears on the comput er and clic k [OK] (f irst time only). Windows J Proceed to step 5 . Macintosh J Refer to the Canon Digital Camera Software Starter Guide Disk and download images. z The following window appears. If the even ts dialog fails to appe ar, click the [Sta ...
-
Canon A520 - page 113
111 Various Functions Various Functions Downloading Images by Direct Transfer Use this method to download images using camera operations. Install the supplied software and adjust the computer settings before using this method for the first time (p. 109). Using the software and compu ter to download images: J See the Canon Digital Came ra Software S ...
-
Canon A520 - page 114
112 Various Functions 2 Use the or button to select , or and press the button. z The images will download. During downloading, the button blinks blue. When downloading is complete, the display will return to the Direct Transfer menu. z To cancel the transfer, press the SET button. 2 Use the or but ton to select or and press the button (or SET butto ...
-
Canon A520 - page 115
113 Various Functions Various Functions Connecting the Camera to the Computer to Download Images without Installing the So ftware If you are using Windows XP or Mac OS X (v10.1.5 – v10.3), you can use the software distributed with these operating systems to download images without installing the software bundled on the Canon Digital Camera Soluti ...
-
Canon A520 - page 116
114 Various Functions Viewing Images on a TV Set You can use a video-compatible tele vision as a monitor to shoot or play b ack images when it is connected to the camera w ith the supplied AV Cable AVC-DC300 . 1 Turn off the camera (p. 30) and t he TV. 2 Attach the AV cable to the A/V Out terminal on the camera. 3 Plug the othe r ends of the AV cab ...
-
Canon A520 - page 117
115 Various Functions Various Functions z No image will ap pear on the LCD mon itor when the camera is conn ected to a TV monitor. z The video output sign al can be s witched (NTSC or PAL) to acco mmodate differe nt regional standards (p . 73). The default setting va ries between regions. - NTSC: Japan, U. S.A., Canada, Taiwan, etc. - PAL: Europe, ...
-
Canon A520 - page 118
116 Various Functions Setting the File Number Reset to [Off] is useful for avoiding file number duplic ation when images are dow nloaded to a co mputer. About File and Folder N umbers Images are as signed fil e number fr om 0001 to 9900, and folders are assi gned fold er numbers from 10 0 to 998 (Folde r numbers cannot cont ain 99 in th e last two ...
-
Canon A520 - page 119
117 Various Functions Various Functions Customizing the Camera (My Camera Settings) My Camera allows you to customize the start-up image and start-u p, operation, self- timer and shutter sounds. Each me nu item has three choices. As default settings, My Camera setting has a science fiction theme and My Camera setting has an animal theme. Changing M ...
-
Canon A520 - page 120
118 Various Functions Registering My Camera Settings Images recorded o nto the memory card and newly recorded sounds ca n be added to the camera as My Camera settings. You can also use the supplied software to upload your computer’s images and sounds to the camera. The following me nu items can be saved to the camera. z Start-up Image z Start-up ...
-
Canon A520 - page 121
119 Various Functions Various Functions 5 Press the DISP. butt on. z An image appears. 6 Select the image you wish to register using the or button. 7 Press the SET button. 6 Select (Record) using the or button and press the SET button. z Recording starts. z Recording stops when the time is exceeded (p. 120). Registering [Start-up Image] Registeri n ...
-
Canon A520 - page 122
120 Various Functions Data that can be Registered as My Camera Settings My Camera settings should conform to the below data types. However, memory card images shot with this camera can be registered as My Camera settings regardless of the below data types. (excluding sounds recorded as a movie or with the sound memo function (p. 95)) z Start-up Ima ...
-
Canon A520 - page 123
121 List of Messages List of Messages The following messages may appear on the LCD moni tor. z For messages which may appear when a printer is connected, refer to th e Direct Print User Guide . Busy.. . The camera i s recording i mage data to the memory card. The playback mo de is running. No memory card You turned on the po wer without a memory ca ...
-
Canon A520 - page 124
122 List of Messages RAW You attempted to play back a RAW image . Unidenti fied Image You attempte d to play bac k an image that wa s recorded i n a special dat a type (proprieta ry data type used by the c amera of anot her manufactur er, etc.) or a movie recorded by an other camer a. Cannot magnify ! You attempte d to magnify a n image re corded i ...
-
Canon A520 - page 125
123 Troubleshooting Troubleshooting Problem Cause Solution The camera will not operate Power is not turned on. z Press the Power button for a few moments. Memory card slot cover or battery cover is open. z Be sure the cover is closed securely. Batteries are loaded in the wrong direction. z Reload the batteries in the correct direction. Batteries ar ...
-
Canon A520 - page 126
124 Troubleshooting The camera will not record Memory card is full. z Insert a new memory card. z If required, download the images to a computer and erase them from the memory card to make space. Memory card is not formatted correctly. z Format the memory card. ( See Formatting Memory Cards (p. 19).) z If reformatting does not work, the memory card ...
-
Canon A520 - page 127
125 Troubleshooting Troubleshooting Batteries consumed quickly Batteries are not the right type. z Use only unused AA-size alkaline batteries or Canon AA-size NiMH batteries. (For information about alkaline batteries, se e Proper Battery Handling (p. 16). ) Battery capacity drops due to low ambient temperatures. z If shooting in a cold area, keep t ...
-
Canon A520 - page 128
126 Troubleshooting Sounds come from the camera interior The camera’s vertical and horizontal orientation has changed. z The mechanism for detecting the camera’s orientation is functioning. This is not a malfunction. Image is blurred or out of focus Camera moved z Hold the camera steady while pressing the shutter button. Autofocus function hamp ...
-
Canon A520 - page 129
127 Troubleshooting Troubleshooting Subject in recorded image is too dark Insufficient light for shooting. z Set the flash on. Subject is dark in comparison to the background. z Set the exposure compensation to a positive (+) value or use the spot metering function. Subject is too far for flash t o reach. z When the flash is used, the distance betw ...
-
Canon A520 - page 130
128 Troubleshooting White dots or white asterisks appear on the image Light from the flash has reflected off dust particles or insects in the air. This occurs more frequently in the following conditions: - When shooting at the wid e angle end. - When shooting with a high aperture value in the aperture- priority AE mode. z This is a phenomenon that ...
-
Canon A520 - page 131
129 Appendix Appendix Using the Pow er K its (Sold Se parately) Using Rechargeable Batteries (Battery and Charger Kit CBK4-200) This kit includes a battery charger and fo ur rechargeable AA-size NiMH (nickel metal hydride) batteries. Charge batteries as shown below. The charge indicator blinks while charging, then remains lit when charging is finis ...
-
Canon A520 - page 132
130 Appendix z Wipe the batter y terminals well with a dry cloth in th e follow ing situat ions, as the terminals may be so iled with oil from one’ s skin or othe r dirt: - If the battery usage time ha s consider ably diminished - If the number of re cordable images has considerab ly diminished - When charging the batteri es (insert and remove th ...
-
Canon A520 - page 133
131 Appendix Appendix z It takes approxi mately 110 minutes wh en two batteries are loaded one at each end of the charge r and 250 minu tes with fo ur for the charger to fully r echarge th em (as determined by testing at Canon facili ties). Please do not charge batteries i n areas where the temper ature is out side the range of 0 to 35°C ( 32 to 9 ...
-
Canon A520 - page 134
132 Appendix 2 Open the terminal cover, and connect the compact power adapter’s DC plug into the camera’s DC IN terminal. z Please unplug the adapter from the power outlet when you have finished using the camera. Use of an AC ada pter kit oth er than AC Adapter Kit ACK8 00 may cause a malfuncti on in the camer a or AC ada pter kit. Using the Le ...
-
Canon A520 - page 135
133 Appendix Appendix Wide Converter WC-DC52 Use this converter for taking wide-angle shots. The wide converter changes the focal length of the camera body’s lens by a factor of 0.7x (the thread diameter is 52 mm.). Tele-converter TC-DC52A This 52 mm-threaded diameter magnifying conversion lens is for ta king telephoto shots. The lens changes the ...
-
Canon A520 - page 136
134 Appendix Conversion Lens Adapter LA-DC52F This separately sold adapter is requir ed for attaching the wide converter, tele-converter and close-up lens (52 mm thread diameter). Attaching a Lens 1 Be sure that the camera is turned off. 2 Press the ring release button an d hold it down, and turn the ring in the direction of the arrow. Ring Release ...
-
Canon A520 - page 137
135 Appendix Appendix z To remove the conversion lens adapter, turn the adapter in the opposite direction with holding down the ring release button. 5 Set the lens on the adapter, and attach it securely by turning it in the indicated directio n. z Completely re move all dust a nd dirt from conversion l enses with a lens blower brush before us e. Th ...
-
Canon A520 - page 138
136 Appendix Using an Externally Mounte d Flash (Sold Separately) High Power Flash HF-DC1 This is an attachable supplementary flash. Photographic subjects that are too distant for the built-in flash to illuminate may be captured using the High-Power Flash. Affix the High-Power Flash to the camera using the bracket as shown below. Please also refer ...
-
Canon A520 - page 139
137 Appendix Appendix z If the batt ery is used in cold regions ( 0°C/ 32°F or lower) , you are recomme nded to carry a sp are lithium b attery (CR12 3A or DL123). Keep the spare batt ery warm in your pocket until immedia tely befo re using it, and exchange it freq uently w ith the battery in t he flash. z Remove the ba ttery fr om the flas h and ...
-
Canon A520 - page 140
138 Appendix 2 Open the terminal cove r and use your finger nail to pull out the battery hold er. 3 Pull open the battery holde r in the direction indicated by the arr ow ( c ). Remove the battery by pulling it up in the direction indicat ed by the arrow ( d ). (–) Side c d 4 Insert a ne w battery with the (–) side facing up. 5 Replace the batt ...
-
Canon A520 - page 141
139 Appendix Appendix Camera Care and Maintenance Use the following procedures to clean the camera body, lens, viewfinder, LCD monitor and other parts. Camera Body : Wipe the c amera body with a soft cloth or an eyeglass l ens wiper. Lens : First use a lens blowe r brush to remov e dust and dir t, then remov e any remaining dirt by wiping th e lens ...
-
Canon A520 - page 142
140 Specifications All data is based on Canon’s standard testing methods. Subject to change without notice . PowerShot A520/PowerShot A510 Camera Effective Pixels PowerShot A520: Approx. 4.0 million PowerShot A510: Approx. 3.2 million Image Sensor PowerShot A520: 1/2.5-inch CCD (Total number of pixels: Approx. 4.2 million) PowerShot A510: 1/2.5-i ...
-
Canon A520 - page 143
141 Specifications Appendix Shutter Speeds 15 – 1/2000 sec. z The shutter speed varies acco rding to the shooting modes. z Slow shutter speeds of 1.3 sec. or slower operate with noise reduction. Metering System Evaluative, Center-weighted average or Spot (Center) Exposure Control System Program AE, Shutter-priority AE, Aperture-pr iority AE, Manu ...
-
Canon A520 - page 144
142 Specifications Self-timer Activates shutter after an approx. 10-se c./2-sec. delay. Can be se t using the custom settings. PC-controlled Shooting Available (USB connection only. Exclusiv e software program is included in the camera kit.) Recording Media SD memory card/MultiMediaCar d File Format Design rule for camera file system and DPOF compl ...
-
Canon A520 - page 145
143 Specifications Appendix * 1 This digital camera support s Exif 2.2 (also called “Exif Print”). Exif Print is a stand ard for enhancing the communication between digital camer as and printers. By connecti ng to an Exif Pri nt-compliant print er, the camera’s imag e data at the time of shooting is used and optimize d, yielding extremely hig ...
-
Canon A520 - page 146
144 Specifications Battery Performance * The actual figures will vary according to the shooting condition and se ttings. Number of Shots Playback Time LCD Monitor ON (Based o n the CIPA standard) LCD Monitor Off AA Alkaline Batterie s (included with the camera) Approx. 80 shots Approx. 240 shots Approx. 180 min. AA NiMH Batterie s (NB-2AH (fully ch ...
-
Canon A520 - page 147
145 Specifications Appendix Memory Cards and Estimated Capacities (Recordable Images) Memory card included with the camera PowerShot A520 PowerShot A510 MMC- 16M SDC- 128M SDC- 512MSH L (Large) 2272 x 1704 pix els 76 1 2 3 7 13 109 425 26 216 838 M1 (Medium 1) 1600 x 1200 pix els 14 121 471 26 216 838 50 411 1589 M2 (Medium 2) 1024 x 768 pixe ls 25 ...
-
Canon A520 - page 148
146 Specifications z Some memory cards are not sold in some regions. z The maximum movie clip length is : 3 0 sec., : 3 min. or : 3 min.. The times shown are the maximum continuous recording times. * When using a 128 MB or higher capacity memory card. z (Superfine), (Fine) and (Normal) indicate the compression setting. z L (Large), M1 (Medium 1), M ...
-
Canon A520 - page 149
147 Specifications Appendix NiMH Battery NB-2AH Supplied with the separately sold NiMH Battery NB4-200 set and the Battery and Charg er Kit CBK4-200. Type Rech argeable nick el metal hydride bat tery Nominal Voltage 1. 2 V DC Typical Capacity 2300 mAh (min .: 2150 mAh) Cycle L ife Appr ox. 300 times Operating Temperat ures 0 – 35°C (32 – 95°F ...
-
Canon A520 - page 150
148 Specifications Compact Power Adapter CA-PS800 Supplied with the separately sold AC Adapter Kit ACK800. Rated Input 100 – 240 V AC (50/60 Hz), 16 VA (100 V) – 26 VA ( 240 V) Rated Output DC 3.15 V DC/2 A Operating Temperat ures 0 – 40°C (32 – 104°F) Dimensio ns 42.5 x 104.0 x 31.4 mm (1.7 x 4.1 x 1.2 in.) Weight Approx. 180 g ( 6.3 oz. ...
-
Canon A520 - page 151
149 Specifications Appendix Wide Converter WC-DC52 (Sol d Separately) Magnification Approx. 0.7 x (35 mm film equivalent at wide angle end : approx. 24. 5 mm) Focusing Range (from front of lens) Approx. 21 cm (8 .3 in.) – i nfinity (at wide angl e end)* 1 Approx. 1 – 21 cm ( 0.4 – 8.3 in.) (at wide angle end wi th using the Macro mode)* 1 Thr ...
-
Canon A520 - page 152
150 Specifications Tele-converter TC-DC52A (Sold Separately) * 1 When mounted on PowerShot A520 /A510. * 2 Conversion Lens Adapter LA -DC52F is required when mounted on PowerS hot A520/A510. Focal Lengt h Approx. 1.7 5x (35mm film equivalent at telephot o end: approx. 245 mm) Focusing Range (from front of lens) Approx. 1.4 m (Approx. 4. 6 ft.) – ...
-
Canon A520 - page 153
151 Appendix Photo Tips and Information This section offers photography tips. z Tip for Using th e Self-timer (p. 45) Normally, the camera shakes a little when you press the shutter button. Setting the self-timer to delays the shutter release for two seconds and allows the camera to stop shaking, thus preventing a blurred image. Even better results ...
-
Canon A520 - page 154
152 Photo Tips and Information Underexp osure The whole recorded image is dark, which makes white elements of the image appear gray. Shooting bright subjects or in backlit conditions may cause the image to be underexposed. Adjust the exposure compensation towards the + end . Optimal Exposure Overexposure The whole recorded image is bright, which ma ...
-
Canon A520 - page 155
153 Appendix INDEX A AC Adapter Kit .................................................. 131 AF Frame ........................................................... 81 Aperture Value ................................................... 79 Aperture-priority AE ............... ............................. 79 Auto Mode ..................................... ...
-
Canon A520 - page 156
154 INDEX Flash ................................................................... 42 Focal Length ............................. 132, 133, 149, 150 Focus Lock ............................................................. 90 Manual ......................................................... 91 Format .................................................. ...
-
Canon A520 - page 157
155 INDEX Appendix Messages ............................................... 121 – 122 Metering Center-Weighted Averaging ......................... 82 Evaluative .................................................... 82 Spot .............................................................. 82 Microphone ................................................. ...
-
Canon A520 - page 158
156 INDEX Resolution .......................................................... 40 Ring Release Button .......................................... 12 Rotate ................................................................. 94 S Self-timer ............................................................ 45 Sound .......................................... ...
-
Canon A520 - page 159
157 INDEX Appendix 10_EC156&157CUG_ EngIX.fm Page 157 Friday, Decem ber 17, 2004 4:10 PM ...
-
Canon A520 - page 160
158 MEMO EC156&157CUG_Eng. book Page 158 Friday, Decem ber 17, 2004 3:32 PM ...
-
Canon A520 - page 161
159 Appendix Functions Available in Each Shooting Mode The following chart shows the functions and settings availab le in each Shooting mode. Function (1) Refer- ence Pages Resolu- tion Large L { * { * { * { * { * { * { * U *– { * { * { * { * 40 Medium 1 M1 {{{{ {{{ U – { { { { Medium 2 M2 {{{{ {{{ U – { { { { Small S {{{{{{{ U – { { { { Po ...
-
Canon A520 - page 162
160 Drive Mode Single Shot { * { * { * { * { * { * { * U * { * { * { * { * { * – Continuous Shooting – {{{{{{ –– {{{{ 48 Self-timer (10 sec.) {{{{{{{ U {{ {{{ 45 Self-timer (2 sec.) {{{{ {{{ U {{{{{ Custom {{{{{{{ –– {{{{ AF Frame selection (2) { * {{{{{ {{ { { { { { 81 AF Lock – {{{{{{ – {{{{{ 90 Manual Focus – {{{{{{ – {{{{{ 9 ...
Do you have a question concerning Canon A520?
Use the form below
If you did not solve your problem by using a manual Canon A520, ask a question using the form below. If a user had a similar problem with Canon A520 it is likely that he will want to share the way to solve it.