Manual Siemens TC35

39 pages 0.27 mb
Download

Go to site of 39

Summary
  • Siemens TC35 - page 1

    s User Guide TC3 5 Terminal www.siemens.com/wm be inspired Wireless Modules www.siemens.com/wm ...

  • Siemens TC35 - page 2

    ...

  • Siemens TC35 - page 3

    1 Safety information Radio devices have limitations in the vicinity of electronic devices: • Switch the TC35 Terminal off when you are in a hospital or near medical devices like pacemakers or hearing aids. The Terminal may interfere with the operation of these devices. • Switch the TC35 Terminal off when flying. Secure it so that it cannot be s ...

  • Siemens TC35 - page 4

    2 Contents Safety information ................................ 1 Contents ................................................. 2 Overview ................................................ 4 Front view .......................................... 4 Rear view ........................................... 4 Product description ............................... ...

  • Siemens TC35 - page 5

    3 Contents Operating states / LED ........................ 29 POWER DOWN ............................... 30 Network search ............................... 31 Standb y ............................................ 31 Tal k .................................................. 31 AT command control .......................... 32 SW update ................ ...

  • Siemens TC35 - page 6

    4 Overview Front view Rear view Plug-in power Antenna connector RS232 interface (9-pin D-Sub) LED display Handset connector Mini-SIM card holder ...

  • Siemens TC35 - page 7

    5 Product description The TC35 Terminal is a compact GSM modem for the transfer of data, voice, SMSand faxes in GSM networks. Industrial standard interfaces and an integrated SIMcard reader mean it can be used rapidly, easily and universally as a dual band GSM Terminal. Its performance band width and the robust housing make it easier to quickly imp ...

  • Siemens TC35 - page 8

    6 Product description Highlights • Dual-band EGSM900 / GSM1800 • Data, voice, SMS and fax • R&TTE approval, GCF approval • Easy to integrate • Industrial interfaces • LED display • Wide input voltage range • Highly compact, light and powerful Applications • Fleet management • Teleservice • Security systems • Telematics ? ...

  • Siemens TC35 - page 9

    7 Features Product data • Dual-band EGSM900 and GSM1800 • Certified in accordance with GSM phase2/2+ • Output performance: – Class 4 (2 W) for EGSM900 – Class 1 (1 W) for GSM1800 • Control via AT commands • Input voltage range +8V ... +30V • Dimensions: 65 x 74 x 33mm • Weight: approx. 130g Certification • R&TTE approval • ...

  • Siemens TC35 - page 10

    8 Features Supplementary services • Phone book • Multiparty • DTMF (Dual Tone Multi Frequency) External interfaces • Connector for plug-in power supply unit • Handset audio interface • Mini-SIM card holder • Antenna connector FME (male) • RS232 interface (V.24/V.28 on the Sub-D socket) Accessories Antennae, SIM cards, power supply u ...

  • Siemens TC35 - page 11

    9 Installation Package contents / scope of delivery • Package unit: TC35 Terminal and user guide L36880-N8600-A100 • TC35 Terminal S30880-S8600-A10 • User guide A31008-H8600-A1-*-7619 Safety and installation information • The Terminal should be installed and set up only by qualified personnel. • Connect a fast 1.25A fuse to the incoming l ...

  • Siemens TC35 - page 12

    10 Installation Mounting kit for top-hat rail installation The TC35 Terminal can be attached to a 35mm top-hat rail using this mounting kit. There are two screws that are used tofix the top-hat rail adapter to the TC35 Terminal. The TC35 Terminal can be inserted onto the top-hat rail using this adapter. ...

  • Siemens TC35 - page 13

    11 Interface description The following interfaces are available on the TC35Terminal: • Connector for the plug-in power supply unit • Handset connector • Mini-SIM card holder • Antenna connector FME (male) • RS232 interface (V.24/V.28 on the D-Sub socket) Plug-in power supply unit The TC35 Terminal receives its power supply in a wide volta ...

  • Siemens TC35 - page 14

    12 Interface description Purpose of the connectors/connections Use and operation The power supply is implemented by the + - and the GND wire. To switch the TC35 Terminal on, proceed as follows: – Either activate the DTR control line via the RS232 interface – Or connect IGT_IN to + . This connection has already been set up in the specified plug- ...

  • Siemens TC35 - page 15

    13 Interface description Polarity reversal protection Polarity reversal protection is implemented by means of a power diode. The diode has a reverse voltage of 400V. Overvoltage protection Overvoltages are suppressed by a Zener diode after the polarity reversal protection diode. Fuses A permanently installed, non-replaceable fuse in the TC35 Termin ...

  • Siemens TC35 - page 16

    14 Interface description Interference immunity • The cable length must not exceed 3m • Current carrying capacity <1.5A (Western modular jack) • Nominal signal range: 0...+30V • Max. load current 1.5A • Electrical fast transient burst requirements in accordance with ETS 300-342-1 • Surge immunity requirements in accordance with ETS 30 ...

  • Siemens TC35 - page 17

    15 Interface description Handset connector The handset is connected via a 4-pin Mini- Western socket. The audio interface has a symmetrical design. The audio interface can be configured by AT commands. Threeaudio modes are prepared in the GSM module for this purpose. Mode 1 (default): The "Handset for Cellular Engine Siemens Terminal M20T, MC3 ...

  • Siemens TC35 - page 18

    16 Interface description Handset connector Purpose of the connectors/connections 2 1 3 4 1 MICN 2 EPN 3 EPP 4 MICP Signal name PIN I/O Description Parameters MICN 1 DC:O AC:I Microphone input minus DC (no load): U 0 =6.0V±10% (MICP) U 0 =0V (MICN) R i = 4.7k (MICP) R i = 4.7k (MICN) AC: U imax = 1.03V PP Z i =2k Ω Gain range:0...42dB MICP 4 DC:O ...

  • Siemens TC35 - page 19

    17 Interface description Use and operation A connected handset can be used when the customer application initiates the TALK state with AT commands via the RS232 interface. Interference immunity • The connecting cable must not exceed 3m in length. • Electrical fast transient burst requirements (cable is >3m) • Surge immunity requirements no ...

  • Siemens TC35 - page 20

    18 Interface description SIM card connector The connector is intended for 3V SIM cards in accordance with GSM11.12 phase2 to operate the Terminal. The SIM card (3V type) must be inserted in the card holder to put the TC35 Terminal into operation. 1. Make sure that there is no voltage applied to the TC35 Terminal. 2. Operate the eject mechanism (yel ...

  • Siemens TC35 - page 21

    19 Interface description 3. Insert the SIM card in the SIM card holder and push it back into the housing. ...

  • Siemens TC35 - page 22

    20 Interface description Purpose of the connectors/connections Use and operation A SIM card holder from Molex with a SIM_IN contact is used. Only when the card holder is inserted is the switched closed. The card can only be replaced when the GSM engine is in the POWER DOWN state. Signal name PIN I/O Description of the GSM module connectors Paramete ...

  • Siemens TC35 - page 23

    21 Interface description The Bootbox BB35 enables software to be updated via the SIM interface. The Bootbox is connected instead of a SIM card (see "Bootbox BB35" on page33). Interference immunity Electrostatic discharge requirements in accordance with ETS 300-342-1 Antenna connector FME (male) A dual band antenna (GSM 900/1800) can becon ...

  • Siemens TC35 - page 24

    22 Interface description Transmission type and method • Digitally modulated RF burst signal • GMSK in accordance with GSM05.04 • Half duplex • Bidirectional Interference immunity • Electrostatic discharge requirements in accordance with ETS 300-342-1 • Electrical fast transient burst requirements (cable is >3m) • Surge immunity req ...

  • Siemens TC35 - page 25

    23 Interface description RS232 interface The RS232 interface is the interface for the application software and the connection to the PC. The customer application communicates with the TC35 Terminal or the TC35 GSM engine by means of A Tcellular commands. The RS232 interface is implemented as a 9-pin D-Sub socket with a screw fitting. RS232 interfac ...

  • Siemens TC35 - page 26

    24 Interface description Purpose of the connectors/connections Use and operation In order to control the Terminal and transfer data, the customer application (e.g. host computer) is connected via the RS232 cable. Signal name PIN I/O Description Parameters DCD 1 O The functions correspond to those of a serial interface on the basis of a V.24 protoco ...

  • Siemens TC35 - page 27

    25 Interface description Interference immunity • The connecting cable must not exceed 1.8m in length. • Nominal signal range: ±15V • Max. load current 1A • Electrical fast transient burst requirements not specified • Surge immunity requirements not specified • Electrostatic discharge requirements in accordance with ETS 300-342-1 • Im ...

  • Siemens TC35 - page 28

    26 Startup Before startup, the components required for your application must be connected. The SIM card must be inserted in a deenergized state. The TC35 Terminal is ready for operation when supply voltage is applied and the ignition line is activated. If the recommended plug-in power supply unit is used, the ignition line is already connected to t ...

  • Siemens TC35 - page 29

    27 Startup In its energized state, the GSM module provides the supply voltage (VDD). VDD ensures that the switching regulator remains on, even when its closing condition is lost (i.e. IGT_IN=low). Explanation: VBAT=operating voltage for the GSM module VDD=supply voltage from the module Activation of the RS232 control line DTR The TC35 Terminal can ...

  • Siemens TC35 - page 30

    28 Startup Activation of the PD_IN reset signal on the power supply connection The POWERDOWN line on the GSM module is connected to the watchdog input pin of the power supply ASIC, which can only be switched off by changing the watchdog condition. To do this, the PD_IN Terminal reset line is active (high) for at least 3.5s. This results in immediat ...

  • Siemens TC35 - page 31

    29 Operating states / LED The LEDs display the following operating states of the Terminal: Operating state LED After connecting the plug- in power supply unit On for 2 s POWER DOWN Off – Network search or – no SIM card is inserted or – no PIN is entered (via PC) or – no GSM network is available Flashes rapidly STANDBY (registered in the net ...

  • Siemens TC35 - page 32

    30 Operating states / LED Note: Usually, the network search takes only a fewseconds till the Terminal is registered. If the flashing continues, this means that no SIM card is inserted, no PIN number is entered or no GSM network is available. POWER DOWN Once the operating voltage is applied ( + and GND), the TC35 Terminal is in the POWER DOWN state. ...

  • Siemens TC35 - page 33

    31 Operating states / LED Network search (no SIM card, no PIN number, no GSM network) In the network search state, the TC35 Terminal searches for a GSM network. All the components in the GSM Terminal (module) that are not required are shut down in several stages by the energy-saving software. This state is reached: • From the POWER DOWN state: by ...

  • Siemens TC35 - page 34

    32 AT command control The TC35 Terminal is controlled and programmed by means of AT commands. The AT command structure corresponds to the TC35 module used. The AT commands can be obtained from the ICM WM home page: www.siemens.com/wm. ...

  • Siemens TC35 - page 35

    33 SW update A SW update for the TC35 Terminal takes place via the RS232 interface or the SIM interface. These interfaces must be designed in such a way that the upgrading ofthe TC35 Terminal is integrated in the application. The software can be obtained from the ICM WM home page. The SW package is self-unpacking and menu-driven. The Bootbox BB35 i ...

  • Siemens TC35 - page 36

    34 Compatibility Compatibility withthe predecessor, the M20Terminal The direct predecessor of the TC35 Terminal is the M20 Terminal. The antenna connector is not compatible. The modified version (passive version) of the Votronic handset must be operated at the audio interface in accordance with HH-SI-30.3/V1.1/0. The following table shows the compa ...

  • Siemens TC35 - page 37

    35 Certification / maintenance Certification The TC35 with its IMEI number is approved for operation in GSM networks and complies with the following EU directives: • Directive 89/336/EEC on electromagnetic compatibility • Directive 98/13/EC, CTR 19 and CTR 20, on telecommunications Terminal equipment • Directive 98/13/EC, CTR 31 and CTR 32, o ...

  • Siemens TC35 - page 38

    36 Index A Accessories 8 Antenna connector 4, 11, 21 AT command control 32 Audio 7 B Bootbox 33 C Certification 7, 35 Compatibility 34 D Data 7 E External interface 8 F Fax 7 Features 7 Fuses 13 H Handset connector 4, 11, 15 I Installation 9 Interface description 11 L LED 4, 29 M Maintenance 35 Mini-SIM card holder 4, 11 N Network search 31 O Opera ...

  • Siemens TC35 - page 39

    Issued by Siemens AG ICM Wireless Modules Haidenau Platz 1, D-81667 Munich Germany www.siemens.com/wm Subject to changes in technology and availability. Order no.: A31008-H8600-A1-1-7619 Printed in Germany be inspired Wireless Modules ...

Manufacturer Siemens Category Modem

Documents that we receive from a manufacturer of a Siemens TC35 can be divided into several groups. They are, among others:
- Siemens technical drawings
- TC35 manuals
- Siemens product data sheets
- information booklets
- or energy labels Siemens TC35
All of them are important, but the most important information from the point of view of use of the device are in the user manual Siemens TC35.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Siemens TC35, service manual, brief instructions and user manuals Siemens TC35. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Siemens TC35.

Similar manuals

A complete manual for the device Siemens TC35, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Siemens TC35 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Siemens TC35.

A complete Siemens manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Siemens TC35 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Siemens TC35, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Siemens TC35, that we can find in the current document
3. Tips how to use the basic functions of the device Siemens TC35 - which should help us in our first steps of using Siemens TC35
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Siemens TC35
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Siemens TC35 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Siemens TC35?

Use the form below

If you did not solve your problem by using a manual Siemens TC35, ask a question using the form below. If a user had a similar problem with Siemens TC35 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)