Manual Compaq NX7000

187 pages 13.06 mb
Download

Go to site of 187

Summary
  • Compaq NX7000 - page 1

    Thank you for purchasing this Factory Service Manual CD/DVD from servicemanuals4u.com. Please check out our eBay auctions for more great deals on Factory Service Manuals: servicemanuals4u ...

  • Compaq NX7000 - page 2

    Main tenan ce and Ser vice Gui de HP P a v ilion W ide sc r een Notebook zt3000 HP C ompaq Busine ss Notebook nx7 000 Co mpaq Pr esar i o W ides cr een Notebook P C X1000 Doc ument P art Number : 3 2 5 38 8-002 October 200 3 This guide is a troubleshooting reference used for maintaining and servicing the notebook. It provides comprehensi ve informa ...

  • Compaq NX7000 - page 3

    © 2003 Hewlett-P ackard Dev elopment Company , L.P . Microsoft® and W indows® are U.S. re gistered trademarks of Microsoft Corporation. Intel®, Pentium®, an d SpeedStep® are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. SD Logo is a trademark of its proprietor . Bluetoot ...

  • Compaq NX7000 - page 4

    Maintenance and S ervice Gui de iii Cont ent s 1 Product Description 1.1 Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–2 1.2 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–22 1.3 Clearing a Password . . . . . . . . . . . . . . . . . . . . . . . . 1–24 1.4 Power Management . . ...

  • Compaq NX7000 - page 5

    i v Maintenance and S ervice Gui de Cont ent s 4 Removal and Replacement Preliminaries 4.1 Tools Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–1 4.2 Service Considerations . . . . . . . . . . . . . . . . . . . . . . . 4–2 Plastic Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–2 Cables and Connec ...

  • Compaq NX7000 - page 6

    Cont ent s Maintenance and Se rvice Guide v 6 Specifications A Connector Pin Assignments B Power Cord Set Requirements 3-Conductor Power Cord Set . . . . . . . . . . . . . . . . . . . . . . B–1 General Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . B–1 Country-Specific Requirements . . . . . . . . . . . . . . . . . . . . B? ...

  • Compaq NX7000 - page 7

    Maintenance and Se rvice Guide 1–1 1 Product Des c ription The HP Pa vilion W i descreen Notebook zt3000, HP Compaq Business Notebook nx7000, and Compaq Presario W idescreen Notebook PC X1000 offer adv anced modularity , a Mobile Intel® Pentium® 4 Processor-M processor with 64-bit architecture, industry-leading A TI MOBILITY RADEON Accelerated ...

  • Compaq NX7000 - page 8

    1–2 Maintenance and S ervice Gui de Product Description 1.1 M o d e l s Notebook models are sho wn in T ables 1-1 through 1-4. Ta b l e 1 - 1 HP P avilion zt3000, HP Compaq nx7000, and Compaq Presario X1000 Model Naming Con ventions Key C P 170 Y5 80 Y Ci 10 P XXXXXX-XXX 12 3 4 5 6 7 8 9 1 0 Ke y Description Options 1 Brand/Series designator V = ...

  • Compaq NX7000 - page 9

    Product Description Maintenance and Se rvice Guide 1–3 Ta b l e 1 - 1 HP P avilion zt3000, HP Compaq nx7000, and Compaq Presario X1000 Model Naming Con vention (Continued) 8 RAM 10 = 1024 MB 51 = 512 MB 25 = 256 MB 9 Operating system H = Microsoft® Windows® XP Home P = Windows XP Pro 10 SKU# Ta b l e 1 - 2 HP P avilion zt3000 Models All HP Comp ...

  • Compaq NX7000 - page 10

    1–4 Maintenance and S ervice Gui de Product Description V P 160 Y5 60 W Ci 51 P K orea DR247A AB1 V P 160 Y5 40 W Cb 25 H Asia P acific DR254A UUF T aiwan DR256A AB0 V P 160 W5 60 Y Cb 51 H Greece DP778E AB7 Switz erland DP778E UUZ V P 160 W5 60 W Cb 51 H Hong K ong DR257A AB5 Thailand DR257A AKL V P 150 Y5 40 W Ci 25 P P eople’ s Republic of C ...

  • Compaq NX7000 - page 11

    Product Description Maintenance and Se rvice Guide 1–5 V P 150 W5 40 W Cb 25 H Asia P acific DR259A UUF V P 140 W5 80 Y Cb 51 P Latin America DR205A ABM V P 140 W5 60 W Cb 51 H United States DM781A ABA V P 140 W5 40 Y Cb 51 H F rance DP786E ABF V P 140 W5 40 W Cb 51 H Fr a n c e Norwa y Germany United States DP784E ABF DP785E ABN DM781E ABD DM783 ...

  • Compaq NX7000 - page 12

    1–6 Maintenance and S ervice Gui de Product Description Ta b l e 1 - 3 HP Compaq nx7000 Models All HP Compaq nx7000 models f eature: ■ T ouchP ad pointing de vice ■ 8-cell, 4.4-wH Li-Ion batter y pack ■ 1-year w arranty on par ts and labor C P 160 Y5 80 W Cb 51 P K orea DM942A AB1 C P 160 Y5 60 Y Ci 51 P F rance DG706T ABF C P 160 Y5 60 W C ...

  • Compaq NX7000 - page 13

    Product Description Maintenance and Se rvice Guide 1–7 C P 160 W5 60 W Cb 51 P Asia P acific Brazil F rench Canada DM945A UUF and DL855A UUF DL855A AC4 DL855A ABC Jap an Latin America Thailand United States DL855A ABJ DL855A ABM DM945A AKL DL855A ABA C P 160 W5 40 D Cb 25 P T aiwan DN896A AB0 P eople’ s Republic of China DS303P AB2 C P 160 W5 4 ...

  • Compaq NX7000 - page 14

    1–8 Maintenance and S ervice Gui de Product Description C P 150 Y5 40 W Ci 51 P Belgium Czech Repub lic Denmark Europe Fr a n c e Germany Greece Hungar y Israel Italy The Netherlands DG705A UUG DG705A AKB DG705A ABY DG705A ABB DG705A ABF and DG705T ABF DG705A ABD and DG705T ABD DG705A AB7 DG705A AKC DG705A ABT DG705A ABZ DG705A ABH Norwa y Po l a ...

  • Compaq NX7000 - page 15

    Product Description Maintenance and Se rvice Guide 1–9 C P 150 W5 60 W Cb 25 P P eople’ s Republic of China DS302P AB2 T aiw an DR746P AB0 C P 150 W5 40 W Cb 51 H Switzerland DJ169S UUZ C P 150 W5 40 W Cb 51 P Asia P acific DN728A UUF C P 150 W5 40 W Cb 25 P Asia P acific DM944A UUF Austr alia DS312P ABG C P 150 W5 40 D Cb 25 H T aiwan DL842A A ...

  • Compaq NX7000 - page 16

    1–10 Maintenance and Serv ice Guide Product Description C P 140 W5 60 W Cb 51 H Sweden DJ200S AK8 C P 140 W5 60 W Cb 25 H Asia P acific A ustralia/New Zealand Hong K ong Jap an DL844A UUF DL844A ABG DM437A AB5 DL844A ABJ Ko r e a Ta i w a n Thailand DL844A AB1 DL846A AB0 DL844A AKL C P 140 W5 60 W Cb 25 P Asia P acific A ustralia/New Zealand Jap ...

  • Compaq NX7000 - page 17

    Product Description Maintenance and S ervice Gui de 1–11 C P 140 W5 40 W Ci 25 P Belgium Czech Repub lic Denmark Europe Fr a n c e Germany Greece Hungar y Israel DG704A UUG and DG704T UUG DG704A AKB DG704A ABY DG704A ABB DG704A ABF , DG704T ABF , and DJ231S ABF DG420A ABD DG704A AB7 DG704A AKC DG704A ABT Italy The Netherlands Norwa y Po l a n d P ...

  • Compaq NX7000 - page 18

    1–12 Maintenance and Serv ice Guide Product Description C P 140 W5 40 C Cb 25 P Asia P acific DR850P UUF Korea DM937A AB1 C P 140 W5 30 D Cb 25 H Hong K ong DR753P AB5 C P 130 Y5 80 W Cb 51 P United States DP113S ABA C P 130 Y5 40 W Cb 51 P United States DP119S ABA C P 130 W5 40 W Cb 25 P T aiwan DN893A AB0 C P 130 W5 40 W Ci 25 P Asia P acific D ...

  • Compaq NX7000 - page 19

    Product Description Maintenance and S ervice Gui de 1–13 Ta b l e 1 - 4 Compaq Presario X1000 Models All Compaq Presario X1000 models feature: ■ T ouchP ad pointing de vice ■ 8-cell, 4.4-wH Li-Ion batter y pack ■ 1-year w arranty on par ts and labor X1094 P 160 Y5 80 Y Cb 51 H A ustralia/New Zealand DR824A ABG X1082 P 160 Y5 80 Y Cb 51 H A ...

  • Compaq NX7000 - page 20

    1–14 Maintenance and Serv ice Guide Product Description X1070 P 160 Y5 60 D Cb 25 H P eople’ s Republic of China DQ976A AB2 X1074 P 160 Y5 60 D Ci 51 H Hong K ong DR270A AB5 X1091 P 160 Y5 40 W Ci 25 H K orea DR287A AB1 X1093 P 160 W5 80 Y Cb 51 H A ustralia/New Zealand DR823A ABG X1097 P 160 W5 80 W Ci 51 H A ustralia/New Zealand DR824A ABG X1 ...

  • Compaq NX7000 - page 21

    Product Description Maintenance and S ervice Gui de 1–15 X1085 P 150 Y5 80 W Cb 51 H Hong K ong DR281A AB5 X1056 P 150 Y5 60 Y Cb 25 H P eople’ s Republic of China DN617A AB2 X1049 P 150 Y5 60 W Cb 51 H Hong K ong DN610A AB5 X1023 P 150 Y5 60 W Cb 51 H Asia P acific DN584A UUF X1069 P 150 Y5 60 W Cb 25 H P eople’ s Republic of China DQ975A AB ...

  • Compaq NX7000 - page 22

    1–16 Maintenance and Serv ice Guide Product Description X1079 P 150 W5 60 W Cb 51 H T aiwan DR275A AB0 X1044 P 150 W5 60 W Cb 51 H K orea DN605A AB1 X1032 P 150 W5 60 W Cb 51 H Asia P acific DN593A UUF X1058 P 150 W5 60 W Cb 25 H K orea DN619A AB1 X1054 P 150 W5 60 W Cb 25 H P eople’ s Republic of China DN615A AB2 X1010 P 150 W5 40 W Cb 51 H De ...

  • Compaq NX7000 - page 23

    Product Description Maintenance and S ervice Gui de 1–17 X1022 P 140 Y5 60 W Cb 25 H Asia P acific DN583A UUF X1065 P 140 Y5 60 W Ci 25 H Asia P acific DN626A UUF X1048 P 140 Y5 40 W Cb 25 H Hong K ong DN609A AB5 X1083 P 140 Y5 40 W Ci 25 H Asia P acific DR279A UUF Korea DR279A AB1 X1095 P 140 Y5 40 C Cb 25 H Asia P acific DR825A UUF X1028 P 140 ...

  • Compaq NX7000 - page 24

    1–18 Maintenance and Serv ice Guide Product Description X1057 P 140 W5 60 W Cb 25 H K orea DN618A AB1 X1053 P 140 W5 60 W Cb 25 H P eople’ s Republic of China DN614A AB2 X1092 P 140 W5 60 W Ci 25 H K orea DR822A AB1 X1087 P 140 W5 60 D Cb 51 H T aiwan DR283A AB0 X1078 P 140 W5 60 D Cb 51 H T aiwan DR274A AB0 X1043 P 140 W5 40 Y Cb 51 H K orea D ...

  • Compaq NX7000 - page 25

    Product Description Maintenance and S ervice Gui de 1–19 X1105 P 140 W5 40 W Cb 25 H United Kingdom DP771E ABU X1077 P 140 W5 40 W Cb 25 H T aiwan DR273A AB0 X1075 P 140 W5 40 W Cb 25 H Asia P acific DR271A UUF X1052 P 140 W5 40 W Cb 25 H P eople’ s Republic of China DN613A AB2 X1050 P 140 W5 40 W Cb 25 H Canada English F rench Canada DP485U AB ...

  • Compaq NX7000 - page 26

    1–20 Maintenance and Serv ice Guide Product Description X1038 P 130 W5 60 W Cb 51 H Thailand DN599A AKL X1010 P 130 W5 60 W Cb 51 H United States DK571A ABA X1035 P 130 W5 60 D Cb 51 H T aiwan DN596A AB0 X1006 P 130 W5 40 Y Cb 51 H F rance DM933A ABF X1060 P 130 W5 40 W Cb 51 H Thailand DN620A AKL X1012 P 130 W5 40 W Cb 51 H United States DN585A ...

  • Compaq NX7000 - page 27

    Product Description Maintenance and S ervice Gui de 1–21 X1034 P 130 W5 40 D Cb 25 H T aiwan DN595A AB0 X1033 P 130 W5 40 D Cb 25 H Asia P acific DN594A UUF Thailand DN594A AKL X1027 P 130 W5 40 D Cb 25 H A ustralia/New Zealand DN588A ABG X1040 P 130 W5 40 C Cb 25 H K orea DN601A AB1 X1026 P 130 W5 40 C Cb 25 H Asia P acific A ustralia/New Zealan ...

  • Compaq NX7000 - page 28

    1–2 2 Maintenance and Serv ice Guide Product Description 1. 2 F e a t u r e s ■ Mobile Intel Pentium 4 Processo r-M 1.7-, 1.6-, 1.5-, 1.4-, or 1.3-GHz processors with 400-MHz processor side bus and 512-KB L2 cache, v arying by notebook model ■ 15.4-inch wide UXGA (1920 × 1200), wide SXGA+ (1680 × 1050), or wide XGA (1280 × 800) TFT display ...

  • Compaq NX7000 - page 29

    Product Description Maintenance and Se rvice Guide 1–2 3 ■ JBL Pro speakers (HP Compaq nx7000 and Compaq Presario X1000 models only) ■ Support for the follo wing optical driv es: ❏ 24X Max D VD/CD-R W combo drive ❏ 8X Max D VD-R W driv e ❏ 24X Max CD-R OM driv e ■ Connectors for: ❏ Microphone ❏ Stereo speaker/headphone ❏ Infrare ...

  • Compaq NX7000 - page 30

    1–2 4 Maintenance and Serv ice Guide Product Description 1. 3 C l e a r i n g a P a s s w o r d If the notebook you are servicing has an unkno wn password, follo w these steps to clear the password. These steps also clear CMOS: 1. Prepare the notebook for disassembly (refer to Section 5.3, “Preparing the Notebook for Disassembly , ” for more ...

  • Compaq NX7000 - page 31

    Product Description Maintenance and Se r v ice Guide 1–2 5 1. 4 P o w e r M a n a g e m e n t The notebook comes with po wer management features that extend battery operating time and conserv e power . The notebook supports the follo wing power management features: ■ Standby ■ Hibernation ■ Setting customization by the user ■ Hotke ys for ...

  • Compaq NX7000 - page 32

    1–2 6 Maintenance and Serv ice Guide Product Description 1 .5 External Com ponen ts The external components on the front and left-side of the notebook are sho wn in the following illustration and described in T able 1-5. F r ont and Left-Si de Compone nts 325388-002.book Page 26 Frid ay, October 24, 2003 9:21 AM ...

  • Compaq NX7000 - page 33

    Product Description Maintenance and Se rvice Guide 1–2 7 Ta b l e 1 - 5 Front and Left-Side Components Item Component Function 1 PC Card slot Suppor ts an optional T ype I or T ype II 32-bit (CardBus) or 16-bit PC Card. 2 PC Card eject button Ejects an optional PC Card from the PC Card slot. 3 Optical drive Suppor ts an optical disc. 4 SD (Secure ...

  • Compaq NX7000 - page 34

    1–2 8 Maintenance and Servi ce Guide Product Description The notebook rear panel and right-side components are sho wn in the follo wing illustration and described in T able 1-6. Rear P anel and Ri ght -Si de Componen ts Ta b l e 1 - 6 Rear P anel and Right-Side Components Item Component Function 1 Infrared port Provides wireless communication bet ...

  • Compaq NX7000 - page 35

    Product Description Maintenance and Se rvice Guide 1–2 9 3 Security cable slot Attaches an op tional security cable to the notebook. ✎ The purpose of security solutions is to act as a deterrent. These solutions do not prevent the product from being mishandled or stolen. 4 V ents (2) Allow airflo w to cool inter nal components. Ä T o pre vent o ...

  • Compaq NX7000 - page 36

    1–30 Maintenance and Serv ice Guide Product Description The notebook ke yboard components are shown in the follo wing illustration and described in T able 1-7. K ey board C omponents 325388-002.book Page 30 Frid ay, October 24, 2003 9:21 AM ...

  • Compaq NX7000 - page 37

    Product Description Maintenance and S ervice Gui de 1–31 Ta b l e 1 - 7 Ke yboard Components Item Component Function 1 F1 through F12 function keys P erform system and application tasks. When combined with the Fn key , t he function ke ys F1 and F3 through F12 perform additional tasks as hotke ys. 2 num lk ke y Enables n umer ic lock and the inte ...

  • Compaq NX7000 - page 38

    1–3 2 Maintenance and Serv ice Guide Product Description The notebook top components are sho wn in the following illustration and described in T able 1-8. T op Components Ta b l e 1 - 8 T op Components Item Component Function 1 Stereo speakers (2) Produce stereo sound. 2 P ower button When the notebook is: ■ Off , press to tur n on the notebook ...

  • Compaq NX7000 - page 39

    Product Description Maintenance and Se rvice Guide 1–3 3 3 Caps lock light On: Caps lock is on. 4 Num lock light On: Num lock or the internal keypad is on. 5 Displa y lid switch ■ If the notebook is cl osed while on, tur ns off the displa y . ■ If the notebook is opened while in Standby , turns on the notebook (resumes from Standby). 6 V olum ...

  • Compaq NX7000 - page 40

    1–34 Maintenance and Serv ice Guide Product Description The external components on the bottom of the notebook are sho wn in the following illustration and described in T able 1-9. Bott om Components Ta b l e 1 - 9 Bottom Components Item Component Function 1 F an vent Allows airflo w to cool inter nal components. Ä T o pre vent o verheating, do n ...

  • Compaq NX7000 - page 41

    Product Description Maintenance and Se rvice Guide 1–3 5 3 Docking connector Connects the notebook to an optional por t replicator . 4 Mini PCI compar tment Contain s the Mini PCI wireless card. 5 Hard dr ive ba y Holds the internal hard dr ive . 6 Batter y bay Holds the batter y pack. 7 Batter y pack release latch Releases a batter y pack from t ...

  • Compaq NX7000 - page 42

    1–3 6 Maintenance and Servi ce Guide Product Description 1. 6 D e s i g n O v e r v i e w This section presents a design ov erview of k ey parts and features of the notebook. Refer to Chapter 3, “Illustrated Parts Catalog, ” to identify replacement parts, and Chapter 5, “Remov al and Replacement Procedures, ” for disassembly steps. The sy ...

  • Compaq NX7000 - page 43

    Maintenance and Se rvice Guide 2–1 2 T roubl eshooting Å W ARN IN G: Only au thori zed tec hnic ians tr ained by HP should re pair t his equipment . All trouble shooting and repair pr ocedures ar e detailed to allo w only subass embly/module le vel r epair . Because o f the comple xity of the indi vi dual boards and suba ssemblies , do not at te ...

  • Compaq NX7000 - page 44

    2–2 Maintenance and S ervice Gui de T rouble shooting ■ Diagnostics f or Windows —A system information and diagnostic utility that is used within the W indows operating system. Use this utility whene ver possible to: ❏ Display system information. ❏ T est system components. ❏ T roubleshoot a de vice configuration problem in W indows XP P ...

  • Compaq NX7000 - page 45

    T rou bleshooting Maintenance and Se rvice Guide 2–3 Selecting fro m the Fi le Menu Ta b l e 2 - 1 File Menu Select T o Do This System Inf or mation ■ Vie w identification information about the notebook, a por t replicator , and any battery packs in the system. ■ View specification inf or mation about the processor , memor y and cache size, a ...

  • Compaq NX7000 - page 46

    2–4 Maintenance and S ervice Gui de T rouble shooting Selectin g from the Securit y Menu Ta b l e 2 - 2 Security Menu Select T o Do This Administrator P assword Enter , cha nge, or delete an administrator pass word. P ower-on P assword Enter , change, or delete a power-on pass word. DriveLoc k Pa sswords Enable/disable DriveLoc k; change a DriveL ...

  • Compaq NX7000 - page 47

    T rou bleshooting Maintenance and Se rvice Guide 2–5 Selec ting from the Adv anced Menu Ta b l e 2 - 3 Adv anced Menu Select T o Do This Language Change the Comp uter Setup language. Boot Options Enable/disab le: ■ QuickBoot, which starts the notebook more quickly b y eliminating some star tup tests. (If you suspect a memory failure and w ant t ...

  • Compaq NX7000 - page 48

    2–6 Maintenance and S ervice Gui de T rouble shooting De vice Options (continued) ■ Change the parallel por t mode from Enhanced P arallel P or t (EPP , the def ault setting) to standard, bidirectional EPP , or Enhanced Capabilities P or t (ECP). ■ Set video-out mode to NTSC (def ault), P AL, NTSC-J , or P AL-M.* ■ Enable/disab le all setti ...

  • Compaq NX7000 - page 49

    T rou bleshooting Maintenance and Se rvice Guide 2–7 2.2 T r oub leshootin g Flo wc h ar ts Ta b l e 2 - 4 T roubleshooting Flowc har ts Overview Flowch ar t Description 2.1 Initial troubleshooting 2.2 No power , par t 1 2.3 No power , par t 2 2.4 No power , par t 3 2.5 No power , par t 4 2.6 No video, part 1 2.7 No video, part 2 2.8 Nonfunctioni ...

  • Compaq NX7000 - page 50

    2–8 Maintenance and S ervice Gui de T rouble shooting Flo wch art 2. 1—Initi al T roub leshooting Connecting to network or modem? Begin troubleshooting. Is there power? Is the OS loading? Is there video? (no boot) Is there sound? Beeps, LEDs, or error messages? Keyboard/ pointing device working? Go to Flowchart 2.17, Nonfunctioning Device. Go t ...

  • Compaq NX7000 - page 51

    T rou bleshooting Maintenance and Se rvice Guide 2–9 Flo w ch art 2.2—N o P ow er , P ar t 1 1. Reseat the power cables in the port replicator and at the AC outlet. 2. Ensure that the AC power source is active. 3. Ensure that the power strip is working. Done Remove from port replicator (if applicable). Power up on battery power? Power up on AC ...

  • Compaq NX7000 - page 52

    2–10 Maintenance and Serv ice Guide T rouble shooting Flo wc har t 2.3—No P ow er , Pa r t 2 Continued from Flowchart 2.2, No Power , Part 1. Visually check for debris in battery socket and clean if necessary . Done N Y Power on? Check battery by recharging it, moving it to another notebook, or replacing it. Power on? Done Y Replace power suppl ...

  • Compaq NX7000 - page 53

    T rou bleshooting Maintenance and S ervice Gui de 2–11 Flo w ch art 2.4—N o P ow er , P ar t 3 Continued from Flowchart 2.3, No Power , Part 2. Reseat AC adapter in notebook and at power source. Internal or external AC adapter? Done Done Done Done Power on? Power on? Power on? Plug directly into AC outlet. Power LED on? Power outlet active? T r ...

  • Compaq NX7000 - page 54

    2–12 Maintenance and Serv ice Guide T rouble shooting Flo wc har t 2.5—No P o wer , P ar t 4 Y N Continued from Flowchart 2.4, No Power , Part 3. Reseat loose components and boards, and replace damaged items. Open notebook. Loose or damaged parts? Y Close notebook and retest. Power on? Done N Replace the following items (if applicable) in the o ...

  • Compaq NX7000 - page 55

    T rou bleshooting Maintenance and S ervice Gui de 2–13 Flo wc h art 2.6—No Video, P art 1 A N Stand-alone or port replicator? No video. Replace the following one at a time. T est after each replacement. 1. Cable between notebook and notebook display (if applicable) 2. Inverter board (if applicable) 3. Display 4. VGA board Internal or external d ...

  • Compaq NX7000 - page 56

    2–14 Maintenance and Serv ice Guide T rouble shooting Flo wc h art 2.7—No Video, P art 2 Y N Continued from Flowchart 2.6, No Video, Part 1. Done Adjust external monitor display . Video OK? Adjust display brightness. Video OK? Video OK? Done Done Check that notebook is properly seated in port replicator , for bent pins on cable, and for monitor ...

  • Compaq NX7000 - page 57

    T rou bleshooting Maintenance and S ervice Gui de 2–15 Flo w ch art 2.8—N onfunc tioning P or t Replicator (if applicable) Y N Reseat power cord in port replicator and power outlet. N Replace the following port replicator components one at a time. Check notebook operation after each replacement. 1. Power supply 2. I/O board 3. Backplane board 4 ...

  • Compaq NX7000 - page 58

    2–16 Maintenance and Serv ice Guide T rouble shooting Flo wch art 2.9—N o Operatin g S ystem (OS) Loading No OS loading from hard drive, go to Flowchart 2.10, No OS Loading, Hard Drive, Part 1. Reseat power cord in port replicator and power outlet. No OS loading.* * NOTE: Before beginning troubleshooting, always check cable connections, cable e ...

  • Compaq NX7000 - page 59

    T rou bleshooting Maintenance and S ervice Gui de 2–17 Flo wc har t 2. 1 0—No OS Loa ding , H ard Driv e, P ar t 1 Go to Flowchart 2.17, Nonfunctioning Device. Done OS not loading from hard drive. Nonsystem disk message? Go to Flowchart 2.11, No OS Loading from Hard Drive, Part 2. Reseat external hard drive. OS loading? Done Boot from CD? Boot ...

  • Compaq NX7000 - page 60

    2–18 Maintenance and Serv ice Guide T rouble shooting Flo wch art 2. 1 1—No OS Loading , H ard Driv e, P ar t 2 Continued from Flowchart 2.10, No OS Loading from Hard Drive, Part 1. Reseat hard drive. Done CD or diskette in drive? 1. Replace hard drive. 2. Replace system board. Go to Flowchart 2.13, No OS Loading from Diskette Drive. Load OS us ...

  • Compaq NX7000 - page 61

    T rou bleshooting Maintenance and S ervice Gui de 2–19 Flo wc har t 2. 1 2—N o OS Loadin g, H ard Driv e, Part 3 Y System files on hard drive? Continued from Flowchart 2.11, No OS Loading from Hard Drive, Part 2. Clean virus. Done N Install OS and reboot. Virus on hard drive? OS loading from hard drive? Y N Y N Y N Diagnostics on diskette? Repl ...

  • Compaq NX7000 - page 62

    2–20 Maintenance and Serv ice Guide T rouble shooting Flo wc har t 2. 1 3—No OS Loadin g, CD- or D VD-ROM Driv e Y Done N Bootable disc in drive? Disc in drive? No OS loading from CD- or DVD-ROM Drive. Install bootable disc and reboot notebook. Go to Flowchart 2.17, Nonfunctioning Device. Go to Flowchart 2.17, Nonfunctioning Device. Install boo ...

  • Compaq NX7000 - page 63

    T rou bleshooting Maintenance and S ervice Gui de 2–21 Flo wch art 2. 1 4—N o Audio, P art 1 No audio. N Notebook in port replicator (if applicable)? Internal audio? Audio? Done Undock Audio? Done T urn up audio internally or externally . Go to Flowchart 2.16, No Audio, Part 2. Go to Flowchart 2.16, No Audio, Part 2. Go to Flowchart 2.17, Nonfu ...

  • Compaq NX7000 - page 64

    2–2 2 Maintenance and Serv ice Guide T rouble shooting Flo w ch art 2. 1 5—No Au dio, P ar t 2 YN Continued from Flowchart 2.15, No Audio, Part 1. Reload audio drivers. Audio driver in OS configured? Audio? Y Y Y N N N Correct drivers for application? Connect to external speaker . Load drivers and set configuration in OS. Audio? Done Replace au ...

  • Compaq NX7000 - page 65

    T rou bleshooting Maintenance and Se rvice Guide 2–2 3 Flo wc har t 2. 1 6—N onfunc tioning D e vice Done Any physical device detected? Y N Unplug the nonfunctioning device from the notebook and inspect cables and plugs for bent or broken pins or other damage. Reseat device. Clear CMOS. Done Fix or replace broken item. Nonfunctioning device. Re ...

  • Compaq NX7000 - page 66

    2–2 4 Maintenance and Serv ice Guide T rouble shooting Flo wch art 2. 1 7—Nonfunc tioning K e yboard Y N OK? Keyboard not operating properly . External device works? Replace system board. Replace system board. Connect notebook to good external keyboard. Reseat internal keyboard connector (if applicable). Replace internal keyboard or cable. OK? ...

  • Compaq NX7000 - page 67

    T rou bleshooting Maintenance and Se r v ice Guide 2–2 5 Flo w ch art 2. 1 8—Nonfun c tioning P oin ting De vice Y N OK? Pointing device not operating properly . External device works? Replace system board. Replace system board. Connect notebook to good external pointing device. Reseat internal pointing device connector (if applicable). Replace ...

  • Compaq NX7000 - page 68

    2–2 6 Maintenance and Serv ice Guide T rouble shooting Flo wch art 2. 1 9—No N etwork/Modem Connec tion Y Disconnect all power from the notebook and open. No network or modem connection. N Done Digital line? Network or modem jack active? Replace jack or have jack activated. Connect to nondigital line. NIC/modem configured in OS? Reload drivers ...

  • Compaq NX7000 - page 69

    Maintenance and Se rvice Guide 3–1 3 I llustra ted P arts C atalog This chapter provides an illustrated parts breakdo wn and a reference for spare part numbers and option part numbers. 3. 1 Seri al Number Loca tion When ordering parts or requesting information, provide the notebook serial number and model number located on the bottom of the noteb ...

  • Compaq NX7000 - page 70

    3–2 Maintenance and S ervice Gui de Illustr ated P ar ts Catalog 3.2 Notebook Major Com ponen ts Notebook Maj or Components 325388-002.book Page 2 Frid ay, October 24, 2003 9:21 AM ...

  • Compaq NX7000 - page 71

    Illustr ated P arts Catalog Maintenance and Se rvice Guide 3–3 Ta b l e 3 - 1 Spare P ar ts: Notebook Major Components Item Description Spare P ar t Number 1 Display assemb lies With carbonite and platinum bl ue finish for use with HP P avilion zt3000 notebooks 15.4-inch, WUXGA 15.4-inch, WSXGA+ 15.4-inch, WXGA 350084-001 350127-001 350126-001 Wi ...

  • Compaq NX7000 - page 72

    3–4 Maintenance and S ervice Gui de Illustr ated P ar ts Catalog Notebook Maj or Components 325388-002.book Page 4 Frid ay, October 24, 2003 9:21 AM ...

  • Compaq NX7000 - page 73

    Illustr ated P arts Catalog Maintenance and Se rvice Guide 3–5 Ta b l e 3 - 1 Spare P ar ts: Notebook Major Components (Continued) Item Description Spare P ar t Number 3 Ke yboards Asia P acific A ustralia Belgium Denmark Fr a n c e Germany Greece Hong K ong Inter national Italy Ko r e a Latin America 337016-371 337016-011 337016-181 337016-081 3 ...

  • Compaq NX7000 - page 74

    3–6 Maintenance and S ervice Gui de Illustr ated P ar ts Catalog Notebook Maj or Components 325388-002.book Page 6 Frid ay, October 24, 2003 9:21 AM ...

  • Compaq NX7000 - page 75

    Illustr ated P arts Catalog Maintenance and Se rvice Guide 3–7 Ta b l e 3 - 1 Spare P ar ts: Notebook Major Components (Continued) Item Description Spare P ar t Number 8 V GA board shield (includes thermal pads) 337013-001 9 V GA boards (include thermal pads) F or use with HP P avilion zt3000 notebooks A TI MOBILITY RADEON 9200 with 64-MB video m ...

  • Compaq NX7000 - page 76

    3–8 Maintenance and S ervice Gui de Illustr ated P ar ts Catalog Notebook Maj or Components 325388-002.book Page 8 Frid ay, October 24, 2003 9:21 AM ...

  • Compaq NX7000 - page 77

    Illustr ated P arts Catalog Maintenance and Se rvice Guide 3–9 Ta b l e 3 - 1 Spare P ar ts: Notebook Major Components (Continued) Item Description Spare P ar t Number Miscellaneous Doors/Co vers Kit , includes: 336984-001 16a 16b 16c 16d R TC batter y R TC batter y cover Mini PCI compar tment cov er Memor y e xpansion compar tment cover 17 Mini ...

  • Compaq NX7000 - page 78

    3–10 Maintenance and Serv ice Guide Illustr ated P ar ts Catalog 3. 3 Miscell an eous P la sti c s Kit Co mponent s Miscell aneous Plastics Kit Components 325388-002.book Page 10 Frid ay, October 24, 2003 9:21 AM ...

  • Compaq NX7000 - page 79

    Illustr ated P arts Catalog Maintenance and S ervice Gui de 3–11 T able 3-2 Miscellaneous Plastics Kit Components Spare P ar t Number 350130-001 (contains parts with carbonite and platinum blue finish f or use with HP P avilion zt3000 notebooks) Spare P ar t Number 338133-001 (contains parts with carbon finish for use with HP Compaq nx7000 notebo ...

  • Compaq NX7000 - page 80

    3–12 Maintenance and Serv ice Guide Illustr ated P ar ts Catalog 3.4 Mis cellan eous C ab le Kit Comp onent s Miscellaneo us Cable K it Components Ta b l e 3 - 3 Miscellaneous Cable Kit Components Spare P ar t Number 336973-001 Item Description 1 SD Card slot board cable 2 Speaker co ver cab le 3 Modem cable 325388-002.book Page 12 Frid ay, Octob ...

  • Compaq NX7000 - page 81

    Illustr ated P arts Catalog Maintenance and S ervice Gui de 3–13 3.5 Mis cellan eous Doors/Co ver s Kit Comp onent s Misc ell an eo us D oo rs/Covers Kit Comp on ent s Ta b l e 3 - 4 Miscellaneous Doors/Co vers Kit Components Spare P ar t Number 336984-001 Item Description 1 R TC batter y 2 R TC batter y cover 3 Memor y e xpansion compar tment co ...

  • Compaq NX7000 - page 82

    3–14 Maintenance and Serv ice Guide Illustr ated P ar ts Catalog 3.6 M as s St or a g e Device s Mass S tor age Dev ice s T able 3-5 Mass Storage Devices Spare P ar t Number Information Item Description Spare P ar t Number 1 Optical drives 24X Max D VD-ROM/CD-R W combination dr ive 8X Max D VD-ROM driv e 24X Max CD-ROM driv e D VD+RW driv e 33698 ...

  • Compaq NX7000 - page 83

    Illustr ated P arts Catalog Maintenance and S ervice Gui de 3–15 3.7 Miscell aneous Ta b l e 3 - 6 Miscellaneous (not illustrated) Spare P ar t Information Description Spare P ar t Number AC a d a p t e r 338136-001 Logo Kits F or use with HP P avilion zt3000 notebooks F or use with HP Compaq nx7000 notebooks F or use with Compaq Pr esario X1000 ...

  • Compaq NX7000 - page 84

    3–16 Maintenance and Serv ice Guide Illustr ated P ar ts Catalog Pow e r c o rd s F or use with HP Compaq nx7000 an d Compaq Presario X1000 notebooks A ustralia Denmark Europe/Middle East/Africa Italy 246959-011 246959-081 246959-021 246959-061 Jap an Ko r e a Switzerland United Kingdom United States 246959-291 246959-AD1 246959-A G1 246959-031 2 ...

  • Compaq NX7000 - page 85

    Maintenance and Se rvice Guide 4–1 4 Remo v al an d Repl a cement Preliminaries This chapter provides essential information for proper and safe remov al and replacement service. 4. 1 T ools Required Y ou will need the following tools to complete the remo val and replacement procedures: ■ Magnetic scre wdriv er ■ Phillips P0 scre wdriv er ■ ...

  • Compaq NX7000 - page 86

    4–2 Maintenance and S ervice Gui de Remo val and Replaceme nt Preliminar ies 4.2 S er vice Consi dera tions The follo wing sections include some of the considerations that you should keep in mind during disassembly and assembly procedures. ✎ As you remov e each subassem bly from the notebook, place the subassembly (and all accompanying scre ws) ...

  • Compaq NX7000 - page 87

    Remo val and Replace ment Pr eliminarie s Maintenance and Se rvice Guide 4–3 4. 3 Pr e v enti ng Da mage to Re mo v able Dri v es Remov able drives are fragile components that must be handled with care. T o prev ent damage to the notebook, damage to a remov able drive, or loss of information, observ e the follo wing precautions: ■ Before removi ...

  • Compaq NX7000 - page 88

    4–4 Maintenance and S ervice Gui de Remo val and Replaceme nt Preliminar ies 4.4 Pre v entin g Elec trosta tic Dam ag e Many electronic components are sensiti ve to electrostatic discharge (ESD). Circuitry design and structure determine the degree of sensiti vity . Networks built into many integrated circuits provide some protection, b ut in many ...

  • Compaq NX7000 - page 89

    Remo val and Replace ment Pr eliminarie s Maintenance and Se rvice Guide 4–5 ■ Store reusable electrostatic-sensiti ve parts from assemblies in protecti ve packaging or nonconducti ve foam. ■ Use transporters and con veyors made of antistatic belts and roller bushings. Ensure that mechanized equipment used for moving materials is wired to gro ...

  • Compaq NX7000 - page 90

    4–6 Maintenance and S ervice Gui de Remo val and Replaceme nt Preliminar ies 4.7 G roundin g Eq uipm ent and Methods Grounding equipment must include either a wrist strap or a foot strap at a grounded workstation. ■ When seated, wear a wrist strap connected to a grounded system. Wrist straps are flexible straps with a minimum of one megohm ±10 ...

  • Compaq NX7000 - page 91

    Remo val and Replace ment Pr eliminarie s Maintenance and Se rvice Guide 4–7 ■ Metal tote boxes ■ Electrostatic voltage le vels and protecti ve materials T able 4-1 shows ho w humidity affects the electrostatic v oltage le vels generated by dif ferent activities. T able 4-2 lists the shielding protection provided by antistatic bags and floor ...

  • Compaq NX7000 - page 92

    Maintenance and Se rvice Guide 5–1 5 Remo v al an d Repl a cement Procedur es This chapter provides remo val and replacement procedures. There are 50 Phillips scre ws, in nine different sizes, that must be remov ed, replaced, and/or loosened when servicing the notebook. Make special note of each scre w size and location during remov al and replac ...

  • Compaq NX7000 - page 93

    5–2 Maintenance and S ervice Gui de Remo val and Replaceme nt Procedur es 5. 1 S e r i a l N u m b e r Report the notebook serial number to HP when requesting information or ordering spare parts. The serial number is located on the bottom of the notebook. Ser ial Number L ocation 325388-002.book Page 2 Frid ay, October 24, 2003 9:21 AM ...

  • Compaq NX7000 - page 94

    Re mov al and Replacemen t Procedur es Maintenance and Se rvice Guide 5–3 5 .2 Disassembl y Sequence C hart Use the follo wing chart to determine the section number to be referenced when removing notebook components. Disassembl y Sequence Char t Section Description # of Screws Removed 5.3 Preparing the notebook for disassemb ly Batter y pack 0 Ha ...

  • Compaq NX7000 - page 95

    5–4 Maintenance and S ervice Gui de Remo val and Replaceme nt Procedur es 5 .3 Preparing t he N otebook for Disasse mbl y Before you begin an y remov al or installation procedures: 1. Sav e your work, exit all applications, and shut do wn the notebook. If you are not sure whet her the notebook is of f or in Hibernation, briefly press the po wer b ...

  • Compaq NX7000 - page 96

    Re mov al and Replacemen t Procedur es Maintenance and Se rvice Guide 5–5 b . Slide and hold 1 the battery release latch to the right. The front edge of the battery pack releases from the notebook. c. Lift the front edge of the battery pack up and swing it back 2 . Re mov ing the Bat tery P ack d. Remov e the battery pack. Re verse the abov e pro ...

  • Compaq NX7000 - page 97

    5–6 Maintenance and S ervice Gui de Remo val and Replaceme nt Procedur es 5. Remov e the hard driv e by follo wing these steps: a. T urn the notebook upside down, with the front facing you. b . Remov e the two PM2.5×9.5 scre ws 1 that secure the hard dri ve to the notebook. c. Use the notch 2 on the hard dri ve cov er to lift the rear edge of th ...

  • Compaq NX7000 - page 98

    Re mov al and Replacemen t Procedur es Maintenance and Se rvice Guide 5–7 Ä CAUT ION: The hard dr iv e cov er should be remo ved only if it is damaged and mus t be replaced . Unnecessar ily remo ving the co ver can r esult in damage to the cov er and hard dr iv e and loss of inf ormatio n. e. Remov e the four PM2.5×3.5 screws 1 that secure the ...

  • Compaq NX7000 - page 99

    5–8 Maintenance and S ervice Gui de Remo val and Replaceme nt Procedur es 5 . 4 N otebook F eet The notebook feet are adhesi ve-backed rubber pads, and are included in the Miscellaneous Plastics Kits, spare part number 350130-001 for HP Pa vilion zt3000 models, spare part number 338133-001 for HP Compaq nx7000 models, and spare part number 337009 ...

  • Compaq NX7000 - page 100

    Re mov al and Replacemen t Procedur es Maintenance and Se rvice Guide 5–9 5 .5 M emor y Expansion B oard 1. Prepare the notebook for disassembly (Section 5.3). 2. T urn the notebook upside down, with the front f acing you. 3. Loosen the PM2.5×5.0 scre w 1 that secures the memory expansion compartment co ver to the notebook. 4. Lift the front edg ...

  • Compaq NX7000 - page 101

    5–10 Maintenance and Serv ice Guide Remo val and Replaceme nt Procedur es 6. Spread the retaining tabs 1 that secure the memory expansion board to the sock et. The board rises up at a 45-degree angle. 7. Pull the board aw ay from the socket at a 45-degree angle 2 . Re mov ing the Memor y Expansion Boar d Re verse the abov e procedure to install a ...

  • Compaq NX7000 - page 102

    Re mov al and Replacemen t Procedur es Maintenance and S ervice Gui de 5–11 5 .6 M ini PCI Communica tions Board 1. Prepare the notebook for disassembly (Section 5.3). 2. T urn the notebook upside down, with the front f acing you. 3. Loosen the PM2.5×5.0 scre w 1 that secures the Mini PCI compartment cov er to the notebook. 4. Lift the rear edge ...

  • Compaq NX7000 - page 103

    5–12 Maintenance and Serv ice Guide Remo val and Replaceme nt Procedur es 6. Disconnect the two antenna cables from the terminals on the Mini PCI communications board 1 . Note that the longer of the two cables should be connected to the left antenna terminal (marked “ A UX”) and the shorter cable should be connected to the right terminal (mar ...

  • Compaq NX7000 - page 104

    Re mov al and Replacemen t Procedur es Maintenance and S ervice Gui de 5–13 5. 7 R TC B a t t e r y ✎ The R TC battery and R TC battery cov er are included in the Miscellaneous Doors/Cov ers Kit, spare part number 336984-001. 1. Prepare the notebook for disassembly (Section 5.3). 2. T urn the notebook upside down, with the front f acing you. 3. ...

  • Compaq NX7000 - page 105

    5–14 Maintenance and Serv ice Guide Remo val and Replaceme nt Procedur es 5 .8 O ptical Driv e 1. Prepare the notebook for disassembly (Section 5.3). 2. T urn the notebook upside down, with the front f acing you. 3. Remov e the PM2.5×9.5 screw 1 that secures the optical dri ve to the notebook. 4. Insert a slender tool into the slot in the hard d ...

  • Compaq NX7000 - page 106

    Re mov al and Replacemen t Procedur es Maintenance and S ervice Gui de 5–15 5. 9 Keyb o a r d 1. Prepare the notebook for disassembly (Section 5.3). 2. T urn the notebook upside down, with the front f acing you. 3. Remov e the two PM2.5×15.0 scre ws that secure the keyboard to the base enclosure. Re mov ing the K ey board S cr ews Spare P ar t N ...

  • Compaq NX7000 - page 107

    5–16 Maintenance and Serv ice Guide Remo val and Replaceme nt Procedur es 4. T urn the notebook right-side up with the front facing you. 5. Open the notebook. 6. Slide the four notches on the top edge of the ke yboard to ward you. Re leasing the K ey board 325388-002.book Page 16 Frid ay, October 24, 2003 9:21 AM ...

  • Compaq NX7000 - page 108

    Re mov al and Replacemen t Procedur es Maintenance and S ervice Gui de 5–17 7. Lift the rear edge of the ke yboard, swing it up and forward 1 , and rest it on the top cov er . 8. Release the ZIF connector 2 to which the ke yboard cable is attached and disconnect the ke yboard cable 3 from the system board. Disconnec ting the K ey board Ca ble 9. ...

  • Compaq NX7000 - page 109

    5–18 Maintenance and Serv ice Guide Remo val and Replaceme nt Procedur es 5. 1 0 Sw i t c h C over ✎ The switch cov er is included in the Miscellaneous Plastics Kits, spare part number 350130-001 for HP Pa vilion zt3000 models, spare part number 338133-001 for HP Compaq nx7000 models, and spare part number 337009-001 for Compaq Presario X1000 m ...

  • Compaq NX7000 - page 110

    Re mov al and Replacemen t Procedur es Maintenance and S ervice Gui de 5–19 5. 1 1 S p e a ker C over 1. Prepare the notebook for disassembly (Section 5.3). 2. Remov e the keyboard (Section 5.9). 3. Remov e the switch cov er (Section 5.10). 4. Disconnect the audio cable 1 from the system board. 5. Remov e the three PM2.5×5.0 screws 2 and the PM2 ...

  • Compaq NX7000 - page 111

    5–20 Maintenance and Serv ice Guide Remo val and Replaceme nt Procedur es 6. Lift the left side of the speaker co ver shield and swing it up and slightly to the right 1 . 7. Slide the speaker co ver back 2 to disengage it from the notebook. 8. Remov e the speaker cov er . Re mov ing the Speake r Co ver Re verse the abov e procedure to install the ...

  • Compaq NX7000 - page 112

    Re mov al and Replacemen t Procedur es Maintenance and S ervice Gui de 5–21 5. 1 2 Fa n 1. Prepare the notebook for disassembly (Section 5.3). 2. Remov e the keyboard (Section 5.9). 3. Remov e the switch cov er (Section 5.10). 4. Remov e the speaker cov er (Section 5.11). 5. Disconnect the fan cable 1 from the system board. 6. Remov e the PM2.5× ...

  • Compaq NX7000 - page 113

    5–2 2 Maintenance and Serv ice Guide Remo val and Replaceme nt Procedur es 5. 1 3 H e a t S i n k 1. Prepare the notebook for disassembly (Section 5.3) and remov e the following components: ❏ K eyboard (Section 5.9) ❏ Switch cov er (Section 5.10) ❏ Speaker co ver (Section 5.11) ❏ Fan (Section 5.12) 2. Remov e the four PM2.0×9.0 spring-lo ...

  • Compaq NX7000 - page 114

    Re mov al and Replacemen t Procedur es Maintenance and Se rvice Guide 5–2 3 ✎ Carefully clean any thermal grease residue from the heat sink 1 and processor surfaces 2 each time you remov e the heat sink. Apply ne w thermal grease to both surfaces. Re mov ing the Thermal Gr ease F rom the Heat Sink and Pr ocessor Re verse the abov e procedure to ...

  • Compaq NX7000 - page 115

    5–2 4 Maintenance and Serv ice Guide Remo val and Replaceme nt Procedur es 5. 1 4 P ro c e s s o r 1. Prepare the notebook for disassembly (Section 5.3) and remov e the following components: ❏ K eyboard (Section 5.9) ❏ Switch cov er (Section 5.10) ❏ Speaker co ver (Section 5.11) ❏ Fan (Section 5.12) ❏ Heat sink (Section 5.13) Spare P ar ...

  • Compaq NX7000 - page 116

    Re mov al and Replacemen t Procedur es Maintenance and Se r v ice Guide 5–2 5 2. Use a flat-bladed tool to turn the processor locking scre w 1 one-quarter turn counterclockwise. 3. Lift the processor straight up 2 and remov e it. ✎ Note that the gold triangle 3 should be in the lo wer right corner when installing the processor . Re mov ing the ...

  • Compaq NX7000 - page 117

    5–2 6 Maintenance and Serv ice Guide Remo val and Replaceme nt Procedur es 5 . 1 5 Di splay Assembl y 1. Prepare the notebook for disassembly (Section 5.3). 2. Remov e the keyboard (Section 5.9). 3. Remov e the switch cov er (Section 5.10). Spare P ar t Number Information With carbonite and platinum bl ue finish for use with HP P avilion zt3000 n ...

  • Compaq NX7000 - page 118

    Re mov al and Replacemen t Procedur es Maintenance and Se rvice Guide 5–2 7 4. Remov e the PM2.5×15.0 screw 1 that secures the display cable to the base enclosure. 5. Disconnect the display video cable 2 from the system board. Disconnecting the Dis play Ca ble 325388-002.book Page 27 Frid ay, October 24, 2003 9:21 AM ...

  • Compaq NX7000 - page 119

    5–2 8 Maintenance and Servi ce Guide Remo val and Replaceme nt Procedur es 6. Close the notebook and turn the notebook upside do wn, with the rear panel facing you. 7. Remov e the following scre ws: ❏ T wo PM2.5×9.5 screws 1 that secure the display assembly to the base enclosure through the bottom of hte top cov er ❏ Three PM2.5×7.0 scre ws ...

  • Compaq NX7000 - page 120

    Re mov al and Replacemen t Procedur es Maintenance and Se rvice Guide 5–2 9 8. T urn the notebook right-side up with the front facing you. 9. Open the display to the fully upright position. 10. Lift the display assembly straight up and remov e it. Re mov ing the Display Ass embly Re verse the abov e procedure to install the display assembly . 325 ...

  • Compaq NX7000 - page 121

    5–30 Maintenance and Serv ice Guide Remo val and Replaceme nt Procedur es 5. 1 6 Top C ove r ✎ When replacing the top cov er , de termine if a Bluetooth board is installed in the defecti ve top cov er . If a board is installed, remove it from the defecti ve top cov er and install it in the replacement top cov er . Refer to Section 5.17, “Blue ...

  • Compaq NX7000 - page 122

    Re mov al and Replacemen t Procedur es Maintenance and S ervice Gui de 5–31 5. Remov e the following scre ws: ❏ Three PM2.5×9.5 scre ws 1 along the front edge of the notebook ❏ T wo PM2.5×5.0 screws 2 in the hard dri ve bay ❏ Six PM2.5×15.0 scre ws 3 ❏ One PM2.5×9.5 scre w 4 behind the hard driv e bay Re mov ing the T op Co ve r Scr e ...

  • Compaq NX7000 - page 123

    5–3 2 Maintenance and Serv ice Guide Remo val and Replaceme nt Procedur es 6. T urn the notebook right-side up with the rear panel facing you. 7. Release the ZIF connector 1 to which the T ouchPad cable is attached and disconnect the T ouchPad cable 2 from the system board. 8. Route the two antenna cables 3 out of the hole in the system board. Di ...

  • Compaq NX7000 - page 124

    Re mov al and Replacemen t Procedur es Maintenance and Se rvice Guide 5–3 3 9. If connected, disconnect the Bluetooth board cable 1 from the system board. 10. Disconnect the left 2 and right speaker cables 3 from the system board. Disconnecting the Blue tooth Wir eless Module and Spe aker Ca bl es 325388-002.book Page 33 Frid ay, October 24, 2003 ...

  • Compaq NX7000 - page 125

    5–34 Maintenance and Serv ice Guide Remo val and Replaceme nt Procedur es 11. Position the notebook so the front faces forward. 12. Remov e the following scre ws: ❏ T wo PM2.5×7.0 scre ws 1 that secure the top cover to the base enclosure ❏ One PM2.0×3.0 scre w 2 that secures the top cover and modem to the base enclosure ❏ One PM2.5×5.0 s ...

  • Compaq NX7000 - page 126

    Re mov al and Replacemen t Procedur es Maintenance and Se rvice Guide 5–3 5 13. Lift the back edge of the top cov er 1 and swing it forward to disengage it from the base enclosure. 14. Remov e the top cover 2 . Re mov ing the T op Co ve r Re verse the abov e procedure to install the top cov er . 325388-002.book Page 35 Frid ay, October 24, 2003 9 ...

  • Compaq NX7000 - page 127

    5–3 6 Maintenance and Servi ce Guide Remo val and Replaceme nt Procedur es 5 . 1 7 Bluetoot h B oard 1. Prepare the notebook for disassembly (Section 5.3) and remov e the following components: ❏ Mini PCI communications board (Section 5.6) ❏ Optical dri ve (Section 5.8) ❏ K eyboard (Section 5.9) ❏ Switch cov er (Section 5.10) ❏ Speaker c ...

  • Compaq NX7000 - page 128

    Re mov al and Replacemen t Procedur es Maintenance and Se rvice Guide 5–3 7 3. Disconnect the Bluetooth board cable 1 from the Bluetooth board. ✎ The Bluetooth board cable is included in the Miscellaneous Cable Kit, spare part number 336973-001. 4. Remov e the two PM1.5×3.0 scre ws 2 that secure the Bluetooth board to the top cov er . 5. Slide ...

  • Compaq NX7000 - page 129

    5–38 Maintenance and Serv ice Guide Remo val and Replaceme nt Procedur es 5 . 1 8 SD C ard Slot Board and C abl e 1. Prepare the notebook for disassembly (Section 5.3) and remov e the following components: ❏ Mini PCI communications board (Section 5.6) ❏ Optical dri ve (Section 5.8) ❏ K eyboard (Section 5.9) ❏ Switch cov er (Section 5.10) ...

  • Compaq NX7000 - page 130

    Re mov al and Replacemen t Procedur es Maintenance and Se r v ice Guide 5–3 9 2. Disconnect the SD Card slot board cable 1 from the system board. 3. Remov e the PM2.5×5.0 screw 2 that secures the SD Card slot board to the notebook. 4. Remov e the PM2.5×5.0 screw 3 that secures the SD Card slot board cable ground loop to the notebook. 5. Remov e ...

  • Compaq NX7000 - page 131

    5–40 Maintenance and Serv ice Guide Remo val and Replaceme nt Procedur es 5 . 1 9 V G A Board and Shiel d 1. Prepare the notebook for disassembly (Section 5.3) and remov e the following components: ❏ Mini PCI communications board (Section 5.6) ❏ Optical dri ve (Section 5.8) ❏ K eyboard (Section 5.9) ❏ Switch cov er (Section 5.10) ❏ Spea ...

  • Compaq NX7000 - page 132

    Re mov al and Replacemen t Procedur es Maintenance and S ervice Gui de 5–41 2. Remov e the PM2.5×15.0 1 and PM2.0×3.0 2 screws that secure the VGA board shield to the base enclosure. 3. Lift the upper left corner of the VGA board 3 to disconnect it from the system board. 4. Remov e the VGA board and shield 4 . 5. Disengage the shield clips 5 to ...

  • Compaq NX7000 - page 133

    5–4 2 Maintenance and Serv ice Guide Remo val and Replaceme nt Procedur es 6. The VGA shield thermal pad 1 and V GA board thermal pad 2 assist in cooling the notebook. Inspect these pads and replace if necessary each time the shield is remov ed. Replac ing the Ther mal P ads on the VG A Board and Shi eld Re verse the abov e procedure to install t ...

  • Compaq NX7000 - page 134

    Re mov al and Replacemen t Procedur es Maintenance and Se rvice Guide 5–4 3 ❏ Speaker co ver (Section 5.11) ❏ Display assembly (Section 5.15) ❏ T op cover (Section 5.16) ❏ VGA board and shield (Section 5.19) 2. Disconnect the modem cable 1 from the system board. 3. Lift the left side of the modem board 2 to disconnect it from the system b ...

  • Compaq NX7000 - page 135

    5–44 Maintenance and Serv ice Guide Remo val and Replaceme nt Procedur es 5. 2 1 Sys t e m B o a rd ✎ When replacing the system board, ensure that the follo wing components are remov ed from the defectiv e system board and installed on the replacement system board: ■ Memory expansion boards (Section 5.5) ■ Mini PCI communications board (Sec ...

  • Compaq NX7000 - page 136

    Re mov al and Replacemen t Procedur es Maintenance and Se rvice Guide 5–4 5 2. Disconnect the SD Card slot board cable 1 from the system board. 3. Remov e the PM2.5×5.0 screw 2 that secures the SD Card slot board cable ground loop to the base enclosure and the PM2.5×5.0 scre w 3 that secures the system board to the base enclosure. Re mov ing th ...

  • Compaq NX7000 - page 137

    5–46 Maintenance and Serv ice Guide Remo val and Replaceme nt Procedur es 4. Lift the right side of the system board approximately 1 inch 1 . If necessary , fle x the back edge of the base enclosure out so that the parallel 2 and serial connectors 3 clear the base enclosure. 5. Slide the system board to the right at an angle 4 . 6. Remov e the sy ...

  • Compaq NX7000 - page 138

    Maintenance and Se rvice Guide 6–1 6 Spec ifica tions This chapter provides physical and performance specif ications. Ta b l e 6 - 1 Notebook Dimensions Height Width Depth 3.45 cm 25.40 cm 35.56 cm 1.4 in 10.0 in 14.0 in W eight (varies by configur ation) 2.95 kg 6.5 lbs Stand-alone power requirements Nominal operating vol t a g e A ver age opera ...

  • Compaq NX7000 - page 139

    6–2 Maintenance and S ervice Gui de Spe cificat ion s Relative humidity (noncondensing) Operating Nonoperating 10% to 90% 5% to 95%, 38.7°C (101 .6°F) maximum we t bulb temperature Altitude (unpressurized) Operating (14.7 to 10.1 psia) Nonoperating (14.7 to 4.4 psia) -15.24 to 3,048 m -15.24 to 12,192 m -50 to 10,000 ft -50 to 40,000 ft Shock O ...

  • Compaq NX7000 - page 140

    Spe cificat ion s Maintenance and Se rvice Guide 6–3 Ta b l e 6 - 2 15.4-inch, Wide UXGA, TFT Displa y Dimensions Height Width Diagonal 20.7 cm 33.1 cm 39.1 cm 8.1 in 13.0 in 15.4 in Number of colors up to 16.8 million Contrast ratio 300:1 Brightness 170 nits typical Pixel resolution Pitch Fo r ma t Configuration 0.173 × 0.173 mm 1920 × 1200 RG ...

  • Compaq NX7000 - page 141

    6–4 Maintenance and S ervice Gui de Spe cificat ion s Ta b l e 6 - 3 15.4-inch, Wide SXGA+, TFT Displa y Dimensions Height Width Diagonal 20.7 cm 33.1 cm 39.1 cm 8.1 in 13.0 in 15.4 in Number of colors up to 16.8 million Contrast ratio 200:1 Brightness 180 nits typical Pixel resolution Pitch Fo r ma t Configuration 0.197 × 0.197 mm 1680 × 1050 ...

  • Compaq NX7000 - page 142

    Spe cificat ion s Maintenance and Se rvice Guide 6–5 Ta b l e 6 - 4 15.4-inch, Wide XGA+, TFT Displa y Dimensions Height Width Diagonal 20.7 cm 33.1 cm 39.1 cm 8.1 in 13.0 in 15.4 in Number of colors up to 16.8 million Contrast ratio 200:1 Brightness 180 nits typical Pixel resolution Pitch Fo r ma t Configuration 0.259 × 0.259 mm 1280 × 800 RGB ...

  • Compaq NX7000 - page 143

    6–6 Maintenance and S ervice Gui de Spe cificat ion s T able 6-5 Hard Drives 80-GB 60-GB (5400- rpm) 60-GB (4200- rpm) 40-GB User capacity per drive 1 80-GB 60-GB 40-GB 30-GB Dimensions Height Width We i g h t 9.5 mm 70 mm 99 g 9.5 mm 70 mm 102 g 9.5 mm 70 mm 99 g 9.5 mm 70 mm 99 g Interface type ATA - 5 ATA - 5 ATA - 5 ATA - 5 T ransfer rate Syn ...

  • Compaq NX7000 - page 144

    Spe cificat ion s Maintenance and Se rvice Guide 6–7 Ta b l e 6 - 6 External A C Adapter W eight .304 kg 0.67 lb P ower supply Rated input voltage Rated input current Rated frequency 100 to 240 V A C RMS 1.7 A RMS 47 to 63 Hz Ta b l e 6 - 7 8-cell, Primary Li-Ion Battery Pac k Dimensions Height Width Depth We i g h t 13.4 cm 9.2 cm 1.9 cm .43 kg ...

  • Compaq NX7000 - page 145

    6–8 Maintenance and S ervice Gui de Spe cificat ion s T able 6-8 24X D VD/CD-RW Drive Applicable disc D VD-5, D VD-9, D VD-10 CD-ROM (Mode 1 and 2) CD Digital A udio CD-XA ready (Mode 2, F or m 1 and 2) CD-I ready (Mode 2, F or m 1 and 2) CD-R (read only) CD Plus Photo CD (single/multisession) CD-Bridge Center hole diameter 1.5 cm 0.59 in Disc di ...

  • Compaq NX7000 - page 146

    Spe cificat ion s Maintenance and Se rvice Guide 6–9 T able 6-9 24X CD-R W Drive Applicable disc DV D - 5 , DV D - 9 , DV D - 1 0 CD-ROM (Mode 1 and 2) CD Digital A udio CD-XA ready (Mode 2, F or m 1 and 2) CD-I ready (Mode 2, F or m 1 and 2) CD-R (read only) CD Plus Photo CD (single/multisession) CD-Bridge Center hole diameter 1.5 cm 0.59 in Dis ...

  • Compaq NX7000 - page 147

    6–10 Maintenance and Serv ice Guide Spe cificat ion s T able 6-10 8X D VD-ROM Drive Applicable disc D VD-5, D VD-9, D VD-10 CD-ROM (Mode 1 and 2) CD Digital A udio CD-XA ready (Mode 2, F or m 1 and 2) CD-I ready (Mode 2, F or m 1 and 2) CD-R (read only) CD Plus Photo CD (single/multisession) CD-Bridge Center hole diameter 1.5 cm 0.59 in Disc diam ...

  • Compaq NX7000 - page 148

    Spe cificat ion s Maintenance and S ervice Gui de 6–11 T able 6-11 24X CD-ROM Drive Applicable disc DV D - 5 , DV D - 9 , DV D - 1 0 CD-ROM (Mode 1 and 2) CD Digital A udio CD-XA ready (Mode 2, F or m 1 and 2) CD-I ready (Mode 2, F or m 1 and 2) CD-R (read only) CD Plus Photo CD (single/multisession) CD-Bridge Center hole diameter 1.5 cm 0.59 in ...

  • Compaq NX7000 - page 149

    6–12 Maintenance and Serv ice Guide Spe cificat ion s T able 6-12 System DMA Hard ware DMA System Function DMA0 A vailab le for audio DMA1* Entertainment audio (default; alternate = DMA0, DMA3, none) DMA2* Disk ette dr ive DMA3 ECP parallel por t LPT1 (default; alternate = DMA0, none) DMA4 DMA controller cascading (not av ailable) DMA5* A vailab ...

  • Compaq NX7000 - page 150

    Spe cificat ion s Maintenance and S ervice Gui de 6–13 T able 6-13 System Interrupts Hard ware IRQ System Function IRQ0 System timer IRQ1 K eyboard controller IRQ2 Cascaded IRQ3 COM2 IRQ4 COM1 IRQ5 Audio (def ault)* IRQ6 Disk ette dr ive IRQ7 P arallel por t IRQ8 Real time cloc k (RTC) IRQ9 Infrared IRQ10 System use IRQ11 System use IRQ12 Inter n ...

  • Compaq NX7000 - page 151

    6–14 Maintenance and Serv ice Guide Spe cificat ion s T able 6-14 System I/O Addresses I/O Address (he x) System Function (shipping configuration) 000 - 00F DMA controller no . 1 010 - 01F Unused 020 - 021 Interrupt controller no. 1 022 - 024 Opti chipset configuration registers 025 - 03F Unused 02E - 02F 8 7334 “Super I/O” configuration for ...

  • Compaq NX7000 - page 152

    Spe cificat ion s Maintenance and S ervice Gui de 6–15 I/O Address (he x) System Function (shipping configuration) 0A2 - 0BF Unused 0C0 - 0DF DMA controller no . 2 0E0 - 0EF Unused 0F0 - 0F1 Coprocessor busy clear/reset 0F2 - 0FF U nused 100 - 16F Unused 170 - 177 Secondar y fixed disk controller 178 - 1EF U nused 1F0 - 1F7 Primar y fixed disk co ...

  • Compaq NX7000 - page 153

    6–16 Maintenance and Serv ice Guide Spe cificat ion s I/O Address (he x) System Function (shipping configuration) 2F0 - 2F7 Unused 2F8 - 2FF Infrared port 300 - 31F Unused 320 - 36F Unused 370 - 377 Secondar y diskette drive controller 378 - 37F Par allel por t (LPT1/default) 380 - 387 Unused 388 - 38B FM synthesizer—OPL3 38C - 3AF Unused 3B0 - ...

  • Compaq NX7000 - page 154

    Maintenance and Se rvice Guide A–1 A Conn ec tor P in As signm en ts Ta b l e A - 1 RJ-45 Network Interface Pin Signal Pin Signal 1 T ransmit + 5 Unused 2 T ransmit – 6 Receive – 3 Receiv e + 7 Unused 4U n u s e d 8U n u s e d 6 5 4 3 2 1 7 8 325388-002.book Page 1 Frid ay, October 24, 2003 9:21 AM ...

  • Compaq NX7000 - page 155

    A–2 Maintenance and S ervice Gui de Connec tor P in Assignments Ta b l e A - 2 RJ-11 Modem Pin Signal Pin Signal 1U n u s e d 4U n u s e d 2 Tip 5 Unused 3R i n g 6U n u s e d Ta b l e A - 3 Universal Serial Bus Pin Signal Pin Signal 1 +5 VDC 3 Data + 2 Data – 4 Ground Ta b l e A - 4 S-Video Pin Signal Pin Signal 1 Ground (Y) 3 Y -Luminance (In ...

  • Compaq NX7000 - page 156

    Connec tor P in Assignments Maintenance and Se rvice Guide A–3 Ta b l e A - 5 External Monitor Pin Signal Pin Signal 1 Red analog 9 +5 VDC 2 Green analog 10 Ground 3 Blue analog 11 Monitor detect 4 Not connected 12 DDC 2B data 5 Ground 13 Hor izontal sync 6 Ground analog 14 V ertical sync 7 Ground analog 15 DDC 2B cloc k 8 Ground analog 1 6 11 5 ...

  • Compaq NX7000 - page 157

    A–4 Maintenance and S ervice Gui de Connec tor P in Assignments Ta b l e A - 6 A udio Line-Out Pin Signal Pin Signal 1 A udio out 2 Ground 2 1 Ta b l e A - 7 Microphone Pin Signal Pin Signal 1 A udio in 2 Ground 2 1 325388-002.book Page 4 Frid ay, October 24, 2003 9:21 AM ...

  • Compaq NX7000 - page 158

    Connec tor P in Assignments Maintenance and Se rvice Guide A–5 Ta b l e A - 8 P arallel Pin Signal Pin Signal 1 Strobe 14 Auto Linef eed 2 Data Bit 0 15 Error 3 Data Bit 1 16 Initialize Printer 4 Data Bit 2 17 Select In 5 Data Bit 3 18 Ground 6 Data Bit 4 19 Ground 7 Data Bit 5 20 Ground 8 Data Bit 6 21 Ground 9 Data Bit 7 22 Ground 10 Ackno wled ...

  • Compaq NX7000 - page 159

    Maintenance and Se rvice Guide B–1 B P o w er C ord Set Requ irements 3-Con duc tor P o wer Cord Set The wide range input feature of the notebook permits it to operate from any line v oltage from 100 to 120 or 220 to 240 volts A C. The po wer cord set included with the notebook meets the requirements for use in the country where the equipment is ...

  • Compaq NX7000 - page 160

    B–2 Maintenance and S ervice Gui de P ow er Cor d Set Requirements Countr y- Spec ifi c Requirements 3-Conductor P ower Cord Set Requirements Country Accredited Agency Applicable Note Number A ustralia EANSW 1 A ustr ia O VE 1 Belgium CEBC 1 Canada CSA 2 Denmark DEMK O 1 Finland FIMK O 1 Fr a n c e U T E 1 Ger many VDE 1 Italy IMQ 1 Jap an M E TI ...

  • Compaq NX7000 - page 161

    P ow er Cord Set Requir ements Maintenance and Se rvice Guide B–3 United Kingdom BSI 1 United States UL 2 Notes 1. The fle xible cord must be <HAR> T ype HO5VV -F , 3-conductor , 1.0 mm 2 conductor size . P ower cord set fittings (appliance coupler and w all plug) must bear the cer tification mark of the agency responsible f or ev aluation ...

  • Compaq NX7000 - page 162

    Maintenance and Se rvice Guide C–1 C Scre w List ing This appendix provides specif ication and reference information for the scre ws used in the notebook. All screws listed in this appendix are av ailable in the Miscellaneous Screw Kit, spare part number 337012-001. 325388-002.book Page 1 Frid ay, October 24, 2003 9:21 AM ...

  • Compaq NX7000 - page 163

    C–2 Maintenance and Serv ice Guide Scr ew Listing Phillips P M2 .5×9 .5 Sc re w Locations Ta b l e C - 1 Phillips PM2.5×9.5 Screw Color Qty . Length T hread Head Width Black 9 9.5 mm 2.5 mm 5.0 mm Where used: 1 T wo scre ws that secure th e hard drive to the notebook (documented in Section 5.3) 2 One screw that secures the optical driv e to the ...

  • Compaq NX7000 - page 164

    Scr ew Listing Maintenance and Se rvice Guide C–3 Phillips P M2 .5×7 .0 Scr ew Locations Ta b l e C - 1 Phillips PM2.5×9.5 Screw (Continued) Color Qty . Length T hread Head Width Black 9 9.5 mm 2.5 mm 5.0 mm Where used: F our screws that secure the top cov er to the notebook (documented in Section 5.16) mm 325388-002.book Page 3 Frid ay, Octobe ...

  • Compaq NX7000 - page 165

    C–4 Maintenance and Serv ice Guide Scr ew Listing Phillips P M2 .5×7 .0 Scr ew Locations Ta b l e C - 2 Phillips PM2.5×7.0 Screw Color Qty . Length T hread Head Width Black 5 7.0 mm 2.5 mm 5.0 mm Where used: Three screws that secure the displa y assembly to the notebook through the rear panel (documented in Section 5.15) mm 325388-002.book Page ...

  • Compaq NX7000 - page 166

    Scr ew Listing Maintenance and Se rvice Guide C–5 Phillips P M2 .5×7 .0 Scr ew Locations Ta b l e C - 2 Phillips PM2.5×7.0 Screw (Continued) Color Qty . Length T hread Head Width Black 5 7.0 mm 2.5 mm 5.0 mm Where used: T wo scre ws that secure the top cov er to the notebook (documented in Section 5.16) mm 325388-002.book Page 5 Frid ay, Octobe ...

  • Compaq NX7000 - page 167

    C–6 Maintenance and Serv ice Guide Scr ew Listing Phillips P M2 .5×3 .5 Sc re w Locations Ta b l e C - 3 Phillips PM2.5×3.5 Screw Color Qty . Length T hread Head Width Silver 4 3 .5 mm 2.5 mm 5.0 mm Where used: F our screws that secure the hard driv e to the hard driv e cov er and shield (documented in Section 5.3) mm 325388-002.book Page 6 Fri ...

  • Compaq NX7000 - page 168

    Scr ew Listing Maintenance and Se rvice Guide C–7 Phillips P M2 .5×5 .0 Sc re w Locations Ta b l e C - 4 Phillips PM2.5×5.0 Screw Color Qty . Length T hread Head Width Black 13 5.0 mm 2.5 mm 5.0 mm Where used: 1 One screw that secures the memory expansion compartment cover to the notebook (documented in Section 5.5) 2 One screw that secures the ...

  • Compaq NX7000 - page 169

    C–8 Maintenance and Serv ice Guide Scr ew Listing Phillips P M2 .5×5 .0 Sc re w Locations Ta b l e C - 4 Phillips PM2.5×5.0 Screw (Continued) Color Qty . Length T hread Head Width Black 13 5.0 mm 2.5 mm 5.0 mm Where used: 1 Three screws that secure the speak er cov er to the notebook (documented in Section 5.11) 2 One screw that secures the f a ...

  • Compaq NX7000 - page 170

    Scr ew Listing Maintenance and Se rvice Guide C–9 Phillips P M2 .5×5 .0 Sc re w Locations Ta b l e C - 4 Phillips PM2.5×5.0 Screw (Continued) Color Qty . Length T hread Head Width Black 13 5.0 mm 2.5 mm 5.0 mm Where used: One screw that secures the displa y assembly to the notebook through the rear panel (documented in Section 5.15) mm 325388-0 ...

  • Compaq NX7000 - page 171

    C–10 Maintenance and S ervice Gui de Scr ew Listing Phillips P M2 .5×5 .0 Sc re w Locations Ta b l e C - 4 Phillips PM2.5×5.0 Screw (Continued) Color Qty . Length T hread Head Width Black 13 5.0 mm 2.5 mm 5.0 mm Where used: T wo scre ws that secure the top cov er to the notebook in the hard drive ba y (documented in Section 5.16) mm 325388-002. ...

  • Compaq NX7000 - page 172

    Scr ew Listing Maintenance and S ervice Gui de C–11 Phillips P M2 .5×5 .0 Sc re w Location Ta b l e C - 4 Phillips PM2.5×5.0 Screw (Continued) Color Qty . Length T hread Head Width Black 13 5.0 mm 2.5 mm 5.0 mm Where used: One screw that secures the top co ver to the notebook (documented in Section 5.16) mm 325388-002.book Page 11 Frid ay, Octo ...

  • Compaq NX7000 - page 173

    C–12 Maintenance and S ervice Gui de Scr ew Listing Phillips P M2 .5×5 .0 Sc re w Locations Ta b l e C - 4 Phillips PM2.5×5.0 Screw (Continued) Color Qty . Length T hread Head Width Black 13 5.0 mm 2.5 mm 5.0 mm Where used: T wo scre ws that secure the SD Card slot board and cable to the notebook (documented in Section 5.18) mm 325388-002.book ...

  • Compaq NX7000 - page 174

    Scr ew Listing Maintenance and S ervice Gui de C–13 Phillips P M2 .5×5 .0 Sc re w Location Ta b l e C - 4 Phillips PM2.5×5.0 Screw (Continued) Color Qty . Length T hread Head Width Black 13 5.0 mm 2.5 mm 5.0 mm Where used: One screw that secures the sy stem board to the notebook (documented in Section 5.21) mm 325388-002.book Page 13 Frid ay, O ...

  • Compaq NX7000 - page 175

    C–14 Maintenance and S ervice Gui de Scr ew Listing Phillips P M2 .5×15 .0 Sc re w Locations Ta b l e C - 5 Phillips PM2.5×15.0 Screw Color Qty . Length T hread Head Width Black 10 15.0 mm 2.5 mm 5.0 mm Where used: 1 T wo scre ws that secure th e ke yboard to the notebook (documented in Section 5.9) 2 Six screws that secure the top co ver to th ...

  • Compaq NX7000 - page 176

    Scr ew Listing Maintenance and S ervice Gui de C–15 Phillips P M2 .5×15 .0 Sc re w Location Ta b l e C - 5 Phillips PM2.5×15.0 Screw (Continued) Color Qty . Length T hread Head Width Black 10 15.0 mm 2.5 mm 5.0 mm Where used: One screw that secures the displa y assembly cable to the notebook (documented in Section 5.15) mm 325388-002.book Page ...

  • Compaq NX7000 - page 177

    C–16 Maintenance and S ervice Gui de Scr ew Listing Phillips P M2 .5×15 .0 Sc re w Location Ta b l e C - 5 Phillips PM2.5×15.0 Screw (Continued) Color Qty . Length T hread Head Width Black 10 15.0 mm 2.5 mm 5.0 mm Where used: One screw that secures the V GA shield to the notebook (documented in Section 5.19) mm 325388-002.book Page 16 Frid ay, ...

  • Compaq NX7000 - page 178

    Scr ew Listing Maintenance and S ervice Gui de C–17 Philli ps P M2 .5×3. 0 Scr ew Location Ta b l e C - 6 Phillips PM2.5×3.0 Screw Color Qty . Length T hread Head Width Black 1 3.0 mm 2.5 mm 5.0 mm Where used: One screw that secures the speak er cov er to the notebook (documented in Section 5.11) mm 325388-002.book Page 17 Frid ay, October 24, ...

  • Compaq NX7000 - page 179

    C–18 Maintenance and S ervice Gui de Scr ew Listing Phillips P M 2 .0×3 .0 Scr ew L ocat ions Ta b l e C - 7 Phillips PM2.0×3.0 Screw Color Qty . Length T hread Head Width Black 2 3.0 mm 2.0 mm 4.0 mm Where used: 1 One screw that secures th e top co ver to the notebook (documented in Section 5.16) 2 One screw that secures the V GA shield to the ...

  • Compaq NX7000 - page 180

    Scr ew Listing Maintenance and S ervice Gui de C–19 Phillips P M2 .0×9 .0 Spr ing-Loaded Sc re w Locations Ta b l e C - 8 Phillips PM2.0×9.0 Spring-Loaded Screw Color Qty . Length T hread Head Width Silver 4 9 .0 mm 2.0 mm 6.0 mm Where used: F our screws that secure th e heat sink to the notebook (documented in Section 5.13) mm 325388-002.book ...

  • Compaq NX7000 - page 181

    C–20 Maintenance and S ervice Gui de Scr ew Listing Phillips P M1.5×3 .0 Sc r ew L ocations Ta b l e C - 9 Phillips PM1.5×3.0 Screw Color Qty . Length T hread Head Width Silver 2 3 .0 mm 1.5 mm 2.0 mm Where used: T wo scre ws that secure the Blue tooth board to the top cove r (documented in Section 5.17) mm 325388-002.book Page 20 Frid ay, Octo ...

  • Compaq NX7000 - page 182

    Maintenance and Se rvice Guide Index–1 Ind e x 1394 connector, location 1–29 802.11b wireless LAN, spare part numbers 3–9 , 5–11 A AC adapter spare part number 3–15 specifications 6–7 applications key, location 1–31 audio line-out jack location 1–27 pin assignments A–4 audio troubleshooting 2–21 B base enclosure, spare part numb ...

  • Compaq NX7000 - page 183

    Index–2 Maintenance and Se r vi ce Guide Index Computer Setup Advanced Menu 2–5 File Menu 2–3 overview 2–1 Security Menu 2–4 connector pin assignments audio line-out jack A–4 external monitor connector A–3 microphone jack A–4 modem jack A–2 monitor connector A–3 network jack A–1 RJ-11 telephone jack A–2 RJ-45 network jack A? ...

  • Compaq NX7000 - page 184

    Index Maintenance and Se rvice Guide Index–3 G grounding equipment and methods 4–6 H hard drive OS loading problems 2–17 removal 5–6 spare part numbers 3–9 , 3–14 , 5–6 specifications 6–6 hard drive bay, location 1–35 hard drive connector, illustrated 3–10 hard drive cover illustrated 3–10 removal 5–7 hard drive shield illus ...

  • Compaq NX7000 - page 185

    Index–4 Maintenance and Se r vi ce Guide Index Mini PCI compartment cover illustrated 3–13 location 1–35 removal 5–11 Miscellaneous Cable Kit components 3–5 , 3–12 spare part number 3–5 , 3–12 , 3–13 Miscellaneous Doors/Covers Kit components 3–9 spare part number 3–9 Miscellaneous Plastics Kit components 3–3 , 3–10 spare p ...

  • Compaq NX7000 - page 186

    Index Maintenance and Se rvice Guide Index–5 power, troubleshooting 2–9 processor removal 5–24 spare part numbers 3–7 , 5–24 R rear panel components 1–28 removal preliminaries 4–1 procedures 5–1 replacement preliminaries 4–1 procedures 5–1 right-side components 1–28 RJ-11 telephone jack location 1–29 pin assignments A–2 RJ ...

  • Compaq NX7000 - page 187

    Index–6 Maintenance and Se r vi ce Guide Index system board removal 5–44 spare part number 3–7 , 5–44 T thermal pad replacement 5–22 spare part number 3–7 , 5–22 tools required 4–1 top components 1–32 top cover removal 5–30 spare part numbers 3–5 , 5–30 TouchPad buttons, location 1–33 TouchPad light, location 1–33 TouchP ...

Manufacturer Compaq Category CD Player

Documents that we receive from a manufacturer of a Compaq NX7000 can be divided into several groups. They are, among others:
- Compaq technical drawings
- NX7000 manuals
- Compaq product data sheets
- information booklets
- or energy labels Compaq NX7000
All of them are important, but the most important information from the point of view of use of the device are in the user manual Compaq NX7000.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Compaq NX7000, service manual, brief instructions and user manuals Compaq NX7000. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Compaq NX7000.

Similar manuals

A complete manual for the device Compaq NX7000, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Compaq NX7000 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Compaq NX7000.

A complete Compaq manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Compaq NX7000 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Compaq NX7000, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Compaq NX7000, that we can find in the current document
3. Tips how to use the basic functions of the device Compaq NX7000 - which should help us in our first steps of using Compaq NX7000
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Compaq NX7000
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Compaq NX7000 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Compaq NX7000?

Use the form below

If you did not solve your problem by using a manual Compaq NX7000, ask a question using the form below. If a user had a similar problem with Compaq NX7000 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)