English dropdown-ico

Manual GE Monogram ZCG3100

16 pages 0.31 mb
Download

Go to site of 16

Summary
  • GE Monogram ZCG3100 - page 1

    If you have questions , call 800.626.2000 or visit our website at: www .monogram.com Monogram. ® Installation Instructions Built-In Compactors Models: ZCG3500 ZCG3300 ZCG3100 ...

  • GE Monogram ZCG3100 - page 2

    Before you begin—Read these instructions completely and carefully . IMPORT ANT: Save these instructions for local inspector’s use. IMPORT ANT: OBSERVE ALL GOVERNING CODES AND ORDINANCES. NOTE TO INST ALLER: Be sure to leave these instructions with the Consumer . NOTE TO CONSUMER: Keep these instructions with your Use and Care Book for future re ...

  • GE Monogram ZCG3100 - page 3

    3 Design Information Built-In Compactors Models available ZCG3500 SS Stainless steel built-in compactor ZCG3300 WW White built-in compactor ZCG3100 BB Black built-in compactor Note: This compactor is designed for built-in applications only . Dimensions and clearances A – 34" (864 mm) adjustable to 35" (889 mm) B – 12" (305 mm) C ...

  • GE Monogram ZCG3100 - page 4

    4 Standard Appearance Panel Options The Monogram compactor models ZCG3300 and ZCG3100 come with a white/black reversible aluminum front drawer panel. Model ZCG3300 is shipped with the white panel showing and model ZCG3100 with the black side showing. The panels on both models can be reversed to reveal the opposite color side. The ZCG3500 comes with ...

  • GE Monogram ZCG3100 - page 5

    5 3/4" Thick W ood Panel with custom handle • Cut panel 12" wide x 25-13/16" high. A custom handle, of your choice, can be installed onto the 3/4" wood panel, replacing the standard handle. The cut edges of the custom panel can be seen and must be finished for best appearance. The trim, drawer front panel and the handle will b ...

  • GE Monogram ZCG3100 - page 6

    6 T ools required: • #2 Phillips head screwdriver • Flat blade screwdriver • T ape measure • Spirit level • 10" long 2x4 • Adjustable wrench or slip joint pliers • Drill and 1/8" drill bit Parts List: • 4 leveling feet caps • 4 Phillips head screws • 2 Slotted head screws • 2 T ip-over brackets • 2 90 ° clips Opti ...

  • GE Monogram ZCG3100 - page 7

    7 Installation in a corner If compactor is to be located in or near a corner of base cabinets, a minimum of 2" clearance from the corner is recommended. This is necessary to prevent adjacent cabinet door handles from inter fering with the compactor drawer . Do not install flooring material after compactor is placed under the counter . This wil ...

  • GE Monogram ZCG3100 - page 8

    8 Step 1 Determine toekick depth Place a section of the carton on the floor for protection. Lay the compactor on its back, supporting it with a piece of wood to prevent pressure on the power cord. Measure the toekick of an adjacent cabinet, from the front of the cabinet door to the front of the toekick (Dimension A). Note: If a custom toekick board ...

  • GE Monogram ZCG3100 - page 9

    9 Step 3 Positioning the compactor backstop A backstop should be installed to prevent the compactor from “ walking ” back when the drawer is closed. Measure and mark 16" back from the front edge of the cabinet toekick. Cut a 2x4, 10" long and anchor to the floor . Note: If using a custom toekick, add that thickness to the 16" mea ...

  • GE Monogram ZCG3100 - page 10

    Compactor T op Countertop Overlap Step 5 Attach tip-over brackets Position tip-over brackets on the top of the compactor . Match hole #3 of the bracket to the screw hole on the compactor (the 3rd hole on the bracket is the standard location). Attach tip-over bracket to compactor with one slotted head screw on each side. • Remove the compactor dra ...

  • GE Monogram ZCG3100 - page 11

    Step 5 (continued) If the countertop cannot be drilled into, slip the 90 ° clips over the short leg of the bracket and screw into the face of the cabinet. 11 T o install custom toekick (not supplied) measure the front of the compactor ’ s adjustable base and use those dimensions to cut out your custom toekick. Secure as appropriate to installati ...

  • GE Monogram ZCG3100 - page 12

    12 Step 7 Changing front panel (ZCG3300 and 3100 only) Remove compactor drawer by pulling it out until it stops. Then lift the drawer to clear second stop and remove drawer . Place drawer on its back. Procedure A Reverse color panel Remove the two screws in the bottom edge of the trim. Slide panel out, turn it over and slide back in. Reinstall trim ...

  • GE Monogram ZCG3100 - page 13

    13 Procedure C (continued) • Lay drawer front face down on a flat sur face. • Remove 9 screws which retain the front panel and handle. – Save handle and galvanized inner door . – Discard front panel with side trim. • Place galvanized inner door onto the back side of the finished panel. • Position the inner door 1/4" below the top o ...

  • GE Monogram ZCG3100 - page 14

    14 Procedure D 3/4" thick wood panel with custom handle • Pull the drawer out to stop position. • Unlatch the drawer front by opening the clasp on the right side. • While supporting the weight of the drawer front, remove the hinge pins on the left side. • Lay drawer front face down on a flat sur face. • Remove 9 screws which retain t ...

  • GE Monogram ZCG3100 - page 15

    15 Procedure D (continued) • T urn the panel over , appearance side up. Use wood blocks to support the inner door and prevent damage to the hinge and lock tabs. • Drill pilot holes through the front of the custom panel and through the metal panel to match the chosen handles. • Secure handle to wood panel with screws (not supplied). Installati ...

  • GE Monogram ZCG3100 - page 16

    Pub. No. 49-5778-4 Dwg. No. 165D4700P196 93042835C 10-03 JR Note: While performing installations described in this book, safety glasses or goggles should be worn. For Monogram ® local ser vice in your area, call 800.444.1845. Note: Product improvement is a continuing endeavor at General Electric. Therefore, materials, appearance and specifications ...

Manufacturer GE Monogram Category Trash Compactor

Documents that we receive from a manufacturer of a GE Monogram ZCG3100 can be divided into several groups. They are, among others:
- GE Monogram technical drawings
- ZCG3100 manuals
- GE Monogram product data sheets
- information booklets
- or energy labels GE Monogram ZCG3100
All of them are important, but the most important information from the point of view of use of the device are in the user manual GE Monogram ZCG3100.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals GE Monogram ZCG3100, service manual, brief instructions and user manuals GE Monogram ZCG3100. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product GE Monogram ZCG3100.

Similar manuals

A complete manual for the device GE Monogram ZCG3100, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use GE Monogram ZCG3100 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of GE Monogram ZCG3100.

A complete GE Monogram manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual GE Monogram ZCG3100 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the GE Monogram ZCG3100, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the GE Monogram ZCG3100, that we can find in the current document
3. Tips how to use the basic functions of the device GE Monogram ZCG3100 - which should help us in our first steps of using GE Monogram ZCG3100
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with GE Monogram ZCG3100
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of GE Monogram ZCG3100 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning GE Monogram ZCG3100?

Use the form below

If you did not solve your problem by using a manual GE Monogram ZCG3100, ask a question using the form below. If a user had a similar problem with GE Monogram ZCG3100 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)