Manual Canon MV600i

155 pages 4.14 mb
Download

Go to site of 155

Summary
  • Canon MV600i - page 1

    Digital Video Camcorder Instruction Manual English Mini Digital Video Cassette PA L This instruction manual covers the MV650i, MV630i, MV600i and MV600. Please note that illustrations and explanation in this manual are based on the MV650i. PUB.DIE-181 Introduction Mastering the Basics Using the Full Range of Features Editing Using a Memory Card MV6 ...

  • Canon MV600i - page 2

    2 Introduction E Important Usage Instructions W ARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE P ARTS INSIDE. REFER SER VICING TO QUALIFIED SERVICE PERSONNEL. W ARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTR ...

  • Canon MV600i - page 3

    3 Introduction E Reference Guide The following manuals are supplied with the camcorder: ❍ Digital Video Camcorder MV650i/MV630i/MV600i/MV600 Instruction Manual This manual explains the camcorder operations from basic video recording to the use of the full range of features. ❍ Windows XP Users Only DV NETWORK SOLUTION DISK Software Instruction M ...

  • Canon MV600i - page 4

    4 Introduction E T able of Contents Introduction Reference Guide ..............................................................................................................3 Thank Y ou for Choosing a Canon ................................................................................7 Introducing the MV650i/MV630i/MV600i/MV600 ................ ...

  • Canon MV600i - page 5

    5 Introduction Adjusting the AE Shift ..................................................................................................76 Setting the Shutter Speed ............................................................................................77 Setting the White Balance ................................................................ ...

  • Canon MV600i - page 6

    6 Introduction Conventions Used in This Manual Operating Modes : MV650i and MV630i only . Available functions depend upon the operating mode. It is indicated as follows: : Function can be used in this mode. : Function cannot be used in this mode. Other Symbols and References ❍ : Reference page number . ❍ : Functions to be operated on the body o ...

  • Canon MV600i - page 7

    7 Introduction E Thank Y ou for Choosing a Canon The Canon MV650i/MV630i/MV600i/MV600 provides a full range of options and functions. We recommend reading this manual thoroughly before you use the camcorder . It will help you to become more familiar with your camcorder , and learn how to operate it properly . We suggest that you master the basic op ...

  • Canon MV600i - page 8

    8 Introduction E Introducing the MV650i/MV630i/MV600i/MV600 Stabilises your recordings even in long telephoto shots (in CAMERA mode). Allows recording even in dark places. The Night mode adjusts automatically to the optimum shutter speed. With the MV650i ’ s Super Night mode (in CAMERA mode) and Low Light Plus mode (in CARD CAMERA mode), you can ...

  • Canon MV600i - page 9

    9 Introduction E Components Guide MV650i/MV630i/MV600i/MV600 P 123456789 D ATA CODE MIX/ SLIDE SHOW DIGIT AL EFFECTS ON/OFF REC (record) SEARCH – button (p. 33) / Record review button (p. 33) / (rewind) button (p. 35) / CARD – button* (p. 110) REC SEARCH + button (p. 33) / (fast forward) button (p. 35) / CARD + button* (p. 110) FOCUS button (p. ...

  • Canon MV600i - page 10

    10 Introduction E TAPE CARD OFF (VCR) PLAY PLAY CAMERA CAMERA POWER POWER CAMERA OFF PLAY(VCR) } Diopter adjustment lever (p. 18) Viewfinder protect cover (p. 141) PHOTO button (p. 54, 103) Advanced accessory shoe (p. 72) Accessory shoe (p. 149) Zoom lever (p. 28) Built-in speaker (p. 37) TAPE/CARD switch* (p. 6) Grip belt (p. 18) Strap mount (p. 1 ...

  • Canon MV600i - page 11

    11 Introduction E S DV AV MIC Bottom view Terminal cover Assist lamp (White LED) (p. 58) Remote sensor (p. 22) Stereo microphone (p. 70) S-video IN/OUT terminal * 2 (p. 40) DV IN/OUT terminal * 2 (p. 86) Terminal cover OPEN/EJECT switch (p. 20) Tripod socket (p. 34) USB terminal * 1 (p. 128) AV IN/OUT terminal * 2 (p. 39) / (phones) terminal (p. 37 ...

  • Canon MV600i - page 12

    12 Introduction E WIRELESS CONTROLLER WL - D80 WT WIRELESS CONTROLLER WL - D79 START /STOP PHOTO ZOOM SELF T. SELF T. D.EFFECT. ON/OFF PHOTO D.EFFECT. ON/OFF SET MENU WT ZOOM SET MENU TV SCREEN TV SCREEN REW PAUSE AV INSERT AV DV REMOTE SET SLOW 2 PLAY STOP FF ZERO SET MEMORY REC PAUSE 12bit AUDIO OUT SEARCH SELECT REW PAUSE AV INSERT AV DV REMOTE ...

  • Canon MV600i - page 13

    13 Mastering the Basics E Using a Household Power Source Y ou can operate the camcorder from a household power source using the supplied power adapter . The power adapter converts current from a power outlet (100-240 V AC, 50/60 Hz) to the DC current used by the camcorder . 1. T ur n the POWER switch to OFF . 2. Connect the power cord to the power ...

  • Canon MV600i - page 14

    14 Mastering the Basics E Attaching and Charging the Batter y Pack Charge the battery pack with the supplied power adapter before you use the camcorder for the first time and subsequently when the message “CHANGE THE BA TTERY P ACK” appears. 1. T ur n the POWER switch to OFF . 2. Move the viewfinder upward. 3. Attach the battery pack to the cam ...

  • Canon MV600i - page 15

    15 Mastering the Basics Charging, Recording and Playback Time Below times are approximate and vary according to the charging, recording or playback conditions. Charging Time • Charge the battery pack in temperatures between 5º C and 40º C. • A lithium ion battery pack can be charged at any charge state. Unlike conventional battery packs, you ...

  • Canon MV600i - page 16

    How much power is left? The battery symbols indicate the charge status of the battery pack. When the battery pack is empty , “ CHANGE THE BA TTERY P ACK ” appears for 4 seconds and starts flashing. The battery charge indicators are not constant – they vary according to the condition under which battery pack and camcorder are used. Battery Pac ...

  • Canon MV600i - page 17

    17 Mastering the Basics E Installing the Backup Batter y The backup battery allows the camcorder to retain date, time and other camcorder settings while the power source is disconnected. Power the camcorder from a household power source or with a battery pack when replacing the backup battery . 1. Open the backup battery cover . 2. Insert the lithi ...

  • Canon MV600i - page 18

    18 Mastering the Basics E Preparing the Camcor der Adjusting the Viewfinder (Diopter Adjustment) 1. T ur n on the camcor der and keep the LCD panel closed to adjust the viewfinder . 2. Adjust the diopter adjustment lever . Do not leave the viewfinder exposed to direct sunlight as it may melt (due to concentration of light by the lens). Adjust the a ...

  • Canon MV600i - page 19

    19 Mastering the Basics E Attaching the Shoulder Strap For extra security and portability , attach the shoulder strap before using the camcorder . Pass the ends through the strap mount and adjust the length of the strap. Mounting the Wide Attachment The WA-30.5 Wide Attachment gives you a wide perspective for indoor shots or panoramic views (0.6 × ...

  • Canon MV600i - page 20

    20 Mastering the Basics E Loading a Cassette Use only video cassettes marked with the D logo. Loading and Unloading 1. Slide and hold the OPEN/EJECT switch and open the cassette compartment cover . The cassette compartment opens automatically . 2. Load/unload the cassette. • Load the cassette with the window facing the grip belt and the REC/SA VE ...

  • Canon MV600i - page 21

    21 Mastering the Basics Protecting T apes from Accidental Erasure T o protect your recordings from accidental erasure, slide the tab on the cassette to the left. (This switch position is usually labelled SA VE or ERASE OFF .) If you load a protected cassette in CAMERA mode, the message “ THE T APE IS SET FOR ERASURE PREVENTION ” appears for app ...

  • Canon MV600i - page 22

    22 Mastering the Basics E Using the Wireless Contr oller Y ou can operate the camcorder with the supplied wireless controller from a distance of up to 5 m. Point it at the camcorder ’ s remote sensor when you press the buttons. Following functions cannot be operated without the wireless controller: • Some special playback modes ( 36) • Photo/ ...

  • Canon MV600i - page 23

    23 Mastering the Basics E Setting the Time Zone, Date and Time Set the time zone, date and time when you first start using your camcorder . Install the backup battery before you begin ( 17). Setting the Time Zone/Daylight Saving Time 1. Press the MENU button to open the menu. 2. T ur n the selector dial to select [SYSTEM] and pr ess the selector di ...

  • Canon MV600i - page 24

    24 Mastering the Basics E ❍ Once you have set time zone, date and time, you do not need to reset the clock each time you travel to another time zone. Just set the time zone to the one of your destination, and the camcorder automatically adjusts the clock. ❍ Days per month and leap years will be automatically adjusted. Setting the Date and Time ...

  • Canon MV600i - page 25

    25 Mastering the Basics 2. T ur n the selector dial to select [SYSTEM] and pr ess the selector dial. 3. T ur n the selector dial to select [D/TIME SET] and press the selector dial. The year display starts to flash. 4. T ur n the selector dial to select the year , and press the selector dial. • The next part of the display starts flashing. • Set ...

  • Canon MV600i - page 26

    26 Mastering the Basics E Recording Movies on a T ape Y ou can use the LCD screen or the viewfinder when recording. Before Y ou Begin Recording Make a test recording first to check if the camcorder operates correctly . Before you make important recordings, clean the video heads ( 141). Preparations Connect a power source. Load a cassette. Recording ...

  • Canon MV600i - page 27

    27 Mastering the Basics When Y ou Have Finished Recording 1. T ur n the POWER switch to OFF . 2. Close the LCD panel. 3. Replace the lens cap. 4. Unload the cassette. 5. Disconnect the power source. When recor ding outdoors or through a window , do not leave LCD screen, viewfinder or lens exposed to direct sunlight as it may cause damage. ❍ T ur ...

  • Canon MV600i - page 28

    28 Mastering the Basics E Zooming The camcorder ’ s zoom lens allows you to choose the best picture angle for your recordings. The camcorder automatically switches between optical zooming and digital zooming. Image resolution is slightly lower with the digital zoom. Optical Zoom Move the zoom lever toward W to zoom out (wide- angle). Move it towa ...

  • Canon MV600i - page 29

    29 Mastering the Basics 5. Press the MENU button to close the menu. ❍ Keep at least 1m to the subject. At wide-angle, you can focus on a subject as close as 1cm. ❍ Digital zoom cannot be used in the Night mode and Super Night (MV650i) mode. ❍ Digital zoom cannot be used when the multi-image screen is selected. ❍ A zoom indicator appears for ...

  • Canon MV600i - page 30

    30 Mastering the Basics E Using the LCD Screen 1. Push the OPEN button at the LCD panel and open the LCD panel. The LCD screen switches on and the viewfinder switches off. 2. Rotate the LCD panel and choose the angle of the screen. Y ou can rotate the LCD panel so that the screen faces in the same dir ection as the lens ( 31), or push it flat again ...

  • Canon MV600i - page 31

    31 Mastering the Basics E Adjusting the Brightness of the LCD Screen 1. Press the MENU button to open the menu. 2. T ur n the selector dial to select [DISPLA Y SET UP] and press the selector dial. 3. T ur n the selector dial to select [BRIGHTNESS] and press the selector dial. 4. T ur n the selector dial and adjust the level. T ur n the selector dia ...

  • Canon MV600i - page 32

    32 Mastering the Basics E 1. Press the MENU button to open the menu. 2. T ur n the selector dial to select [DISPLA Y SET UP] and press the selector dial. 3. T ur n the selector dial to select [LCD MIRROR] and pr ess the selector dial. 4. T ur n the selector dial to select [OFF]. 5. Press the MENU button to close the menu. When [LCD MIRROR] is set t ...

  • Canon MV600i - page 33

    33 Mastering the Basics E Searching and Reviewing when Recor ding Record Review In record pause mode, this function allows you to review the last few seconds of your recording to check if it has been recorded properly . Press and r elease the c (recor d r eview) button. The camcorder r ewinds the tape, plays back the last few seconds, and returns t ...

  • Canon MV600i - page 34

    34 Mastering the Basics E Tips for Making Better Videos Holding the Camcorder For maximum stability , grip the camcorder in your right hand and keep your right elbow pressed against your body . If necessary , support the camcorder with your left hand. Be careful that your fingers do not touch the microphone or lens. For More Stability Lighting When ...

  • Canon MV600i - page 35

    35 Mastering the Basics E Playing Back a T ape When you use the LCD screen for playback, the camcorder plays back the sound via built-in speaker . The built-in speaker is monaural. Use headphones for stereo sound or when using the viewfinder for playback. Preparations Connect a power source. Load a cassette. Playback 1. Set the camcorder to PLA Y ( ...

  • Canon MV600i - page 36

    36 Mastering the Basics E Special Playback Modes Special playback modes (except of playback pause and fast/rewind playback) can only be operated with the wireless controller . e / a (Playback Pause) T o pause playback, press the e / a button. Press the e / a button to resume playback. The camcorder goes into stop mode after 5 minutes in playback pa ...

  • Canon MV600i - page 37

    37 Mastering the Basics Playing Back with the Built-in Speaker/Headphones When using the built-in speaker , make sure that “ H ” is not displayed on the screen. When using the headphones, make sur e that “ H ” is displayed. Change the setting as necessary following the procedur e below . Switching the A V/Headphones T erminal 1. Press the M ...

  • Canon MV600i - page 38

    38 Mastering the Basics E Adjusting the V olume *Headphone volume only . T ur n the selector dial up to incr ease the volume, and down to lower the volume. • A volume bar appears for 4 seconds. • Y ou can turn off the volume completely by turning the selector dial down until OFF appears. T urn the selector dial up to increase the volume again. ...

  • Canon MV600i - page 39

    39 Mastering the Basics E Playing Back on a TV Screen Y ou can connect the camcorder to a TV or VCR to play back your recordings on a TV screen. ❍ Make sure that “ H ” is not displayed on the scr een. If “ H ” is displayed on the screen, change the setting ( 37). ❍ When you use the TV as a monitor during recor ding, keep the TV volume t ...

  • Canon MV600i - page 40

    40 Mastering the Basics 4. If connecting to a TV , set the input selector to VIDEO. If connecting to a VCR, set the input selector to LINE. The SCART Adapter PC-A10 is for output only . For analog line-in recor ding or analog-digital conversion, please use a SCART adapter with input capability (commercially available). TVs with S (S1)-Video Input T ...

  • Canon MV600i - page 41

    41 Mastering the Basics TVs with Audio/Video T erminals Refer also to the TV or VCR instruction manual. 1. T ur n of f all devices before starting the connections. 2. Connect the STV -250N Stereo Video Cable to the camcor der ’ s A V terminal and the audio/video terminals on the TV/VCR. Connect the white plug to the white audio terminal L (left), ...

  • Canon MV600i - page 42

    42 Mastering the Basics E Selecting the Audio Output Channel Y ou can select the output channels when playing back a tape with audio recorded on two channels. 1. Press the MENU button to open the menu. 2. T ur n the selector dial to select [AUDIO SET UP] and press the selector dial. 3. T ur n the selector dial to select [OUTPUT CH] and press the se ...

  • Canon MV600i - page 43

    43 Using the Full Range of Features E Menus and Settings Many of the camcorder’ s advanced functions are selected from menus that appear on the screen. Selecting Menus and Settings 1. Set the camcorder to the correct operating mode. 2. Press the MENU button to open the menu. 3. T ur n the selector dial to select a submenu and pr ess the selector ...

  • Canon MV600i - page 44

    44 Using the Full Range of Features E Menu and Default Settings Default settings are shown in boldface. CAMERA Menu (CAM. MENU) CARD CAMERA CARD CAMERA PLA Y (VCR) CAMERA Submenu Menu Item Setting Options CARD MIX * 2 MIX TYPE CARD CHROMA , CARD LUMI., 121 CAM. CHROMA, C. ANIMATION ANIMAT. TYPE CORNER , STRAIGHT, RANDOM 122 MIX LEVEL 121 CAMERA S ...

  • Canon MV600i - page 45

    45 Using the Full Range of Features E PLA Y (VCR) Menu (VCR MENU) CARD CAMERA CARD CAMERA PLA Y (VCR) CAMERA Submenu Menu Item Setting Options VCR SET UP REC MODE * 4 SP, LP 53 AV/PHONES AV , PHONES H 37 AV DV OUT * 4 ON, OFF 92 AUDIO SET UP OUTPUT CH L/R , L/L, R/R 42 AUDIO DUB * 4 AUDIO IN , MIC. IN 96 WIND SCREEN ON, OFF 70 AUDIO MODE * 4 16bi ...

  • Canon MV600i - page 46

    46 Using the Full Range of Features E CARD CAMERA Menu (C. CAM. MENU) CARD PLA Y (VCR) CARD CAMERA PLA Y (VCR) CAMERA MV630i MV650i Submenu Menu Item Setting Options CAMERA SET UP SHUTTER AUTO , 1/50, 1/120, 1/250 77 WHITE BAL. AUTO , SET W , INDOOR T , OUTDOOR U 79 CARD SET UP SI QUALITY SUPER FINE, FINE , NORMAL 100 SI SIZE 1024 × 768 , 640 × 4 ...

  • Canon MV600i - page 47

    47 Using the Full Range of Features E CARD PLA Y (VCR) Menu (C.PLA Y MENU) CARD PLA Y (VCR) CARD CAMERA PLA Y (VCR) CAMERA MV630i MV650i Submenu Menu Item Setting Options CARD COPY CANCEL , EXECUTE 126 OPERATIONS (Single Image PRINT ORDERS YES, NO 116 Display) ALL ERASE IMAGE ERASE CANCEL , SINGLE, ALL 114 FORMAT CANCEL , EXECUTE 127 CARD PROTE ...

  • Canon MV600i - page 48

    48 Using the Full Range of Features E Changing the Remote Sensor Mode T wo remote sensor modes and an off setting are available to prevent interference from other Canon wireless controllers being used nearby . T urning the Remote Sensor Off Open the menu and select [SYSTEM]. Select [WL. REMOTE], set it to [OFF B ] and close the menu. ” B ” appe ...

  • Canon MV600i - page 49

    49 Using the Full Range of Features E Customizing the Camcorder Y ou can personalise your camcorder by customizing the start-up image and the sound it makes for start-up, shutter*, start/stop and self-timer (collectively called the My Camera settings). * MV650i and MV630i only . With the MV650i and MV630i, you can also create your own start-up imag ...

  • Canon MV600i - page 50

    50 Using the Full Range of Features E Setting the Light-up Buttons The buttons above the LCD panel light up when the camcorder ’ s power is on, or when you press a button. This is helpful if, for example, you wish to play back a tape in dark places. Y ou can select the colour of the light-up buttons from green, orange, blue, yellow , turquoise an ...

  • Canon MV600i - page 51

    51 Using the Full Range of Features E Other Camcorder Settings Beep Y ou will hear a beep upon camcorder operations such as power on/off, start/stop, self- timer countdown, automatic shut-off, and unusual conditions of the camcorder . The beep will not be recorded. If you turn off the beep, all camcorder sounds including the ones of the My Camera s ...

  • Canon MV600i - page 52

    52 Using the Full Range of Features Demonstration Mode The demonstration mode displays the camcorder ’ s main features. It starts automatically when you leave the camcorder turned on without loading a cassette (MV650i/MV630i: and without inserting a memory card) for more than 5 minutes. Y ou can also start the demonstration mode through the menu. ...

  • Canon MV600i - page 53

    53 Using the Full Range of Features E Changing the Recording Mode (SP/LP) Y ou can choose from SP (standard play) and LP (long play). LP extends the tape usage by 1.5 times. ❍ T apes recorded in LP mode cannot be used for audio dubbing ( 95) or A V insert ( 93). ❍ Depending on the nature and usage condition of the tape, pictur e and sound recor ...

  • Canon MV600i - page 54

    54 Using the Full Range of Features E Recording Still Images on a T ape Y ou can record still images on the tape. Starting your recording with a still image allows you to easily locate the beginning of the recording with the Photo Search function ( 84). In Record Pause Mode 1. Press the PHOTO button halfway . • Autofocus: F flashes in white and t ...

  • Canon MV600i - page 55

    55 Using the Full Range of Features ❍ When you turn the POWER switch to OFF while the camcorder is recor ding the still image, it will not turn off until recor ding is complete. ❍ Record still images under suf ficient lighting condition (in which you can identify the subject on the screen). ❍ If a subject is unsuitable for autofocus, F contin ...

  • Canon MV600i - page 56

    56 Using the Full Range of Features E Using the Recording Pr ograms The camcorder is equipped with the Easy Recording program and several program AE modes. The availability of functions differs depending on the selected mode. A vailability of Functions in Each Mode: A: Auto setting h : Available × : Not available *1 MV650i only . *2 The image stab ...

  • Canon MV600i - page 57

    57 Using the Full Range of Features E Sports Use this mode to record sports scenes (such as tennis or golf), moving objects (such as roller coasters) or when recording from a moving car . ❍ This mode is set at a high shutter speed and should therefor e be used in sufficient light. ❍ This mode is mainly intended for frame-by-frame or slow playba ...

  • Canon MV600i - page 58

    58 Using the Full Range of Features Night Use this mode to record in dark places. The shutter speed is adjusted automatically . It is useful when recording in places with changing light conditions (such as in amusement parks). ❍ Night mode cannot be used in CARD CAMERA mode. ❍ Moving subjects may leave a trailing afterimage. ❍ Picture quality ...

  • Canon MV600i - page 59

    59 Using the Full Range of Features Selecting the Program AE Mode 1. Slide the program selector to Q (program AE). 2. Press the selector dial. A list of the program AE modes appears. 3. Select a mode and press the selector dial. The symbol of the mode appears on the upper left corner of the screen. (Auto) disappears after 4 seconds. ❍ Do not chan ...

  • Canon MV600i - page 60

    60 Using the Full Range of Features E Using Digital Effects Y ou can use the digital effects during recording and playback. Faders ( 61): Begin or end scenes with a fade to or from black. Effects ( 64): Add flavor to your recordings. Multi-image screen ( 66) A vailability of Digital Effects by Operating Modes: h : A vailable i : Not available *1: B ...

  • Canon MV600i - page 61

    61 Using the Full Range of Features Faders Fade T rigger (FADE-T) Wipe (WIPE) Corner Wipe (CORNER) Jump (JUMP) Flip (FLIP) E The image gradually fades in. The image gradually fades out. The image begins as a vertical line in the centre and expands sideways until it fills the whole screen. The image is wiped off from the sides of the screen. The ima ...

  • Canon MV600i - page 62

    62 Using the Full Range of Features E Puzzle (PUZZLE) Zigzag (ZIGZAG) Beam (BEAM) Tide (TIDE) The image appears in 16 pieces. The pieces move around until the puzzle is solved. The image is divided into 16 pieces. The pieces move around and disappear . The image appears in zigzag from the top of the screen. Black stripes appear in zigzag from the b ...

  • Canon MV600i - page 63

    63 Using the Full Range of Features Selecting a Fader 1. In CAMERA mode, set the program selector to Q . 2. Press the DIGIT AL EFFECTS button. [D.EFFECTS | ], [F ADER], [EFFECT] and [MUL TI-S] appear . 3. Select [FADER]. 4. Select the fader option. 5. Press the DIGIT AL EFFECTS button. The name of the selected fader flashes. CAMERA mode: 6. Fade in ...

  • Canon MV600i - page 64

    64 Using the Full Range of Features E Effects Art (ART) The image becomes like a paint (solarization). Black and White (BLK & WHT) The image becomes black and white. Sepia (SEPIA) The image becomes monochrome with a brownish tint. Mosaic (MOSAIC) The image is blurred through enlarging the size of some pixels. Ball (BALL) The image becomes like ...

  • Canon MV600i - page 65

    65 Using the Full Range of Features Selecting an Effect 1. Press the DIGIT AL EFFECTS button. [D.EFFECTS OFF], [F ADER], [EFFECT] and [MUL TI-S] appear . 2. Select [EFFECT]. 3. Select the effect. 4. Press the DIGIT AL EFFECTS button. The name of the selected effect flashes. 5. Press the ON/OFF button. • The name of the selected effect stops flash ...

  • Canon MV600i - page 66

    66 Using the Full Range of Features E Using the Multi-Image Screen The multi-image screen captures moving subjects in 4, 9 or 16 sequences of still images with the Image Capture feature and displays them at one time. Sound will be recorded normally . This feature can be used in CAMERA and PLA Y (VCR) mode. Y ou can choose the transition speed at wh ...

  • Canon MV600i - page 67

    67 Using the Full Range of Features Capturing 10 . Press the ON/OFF button. • MANUAL: Images will be captured each time you press the ON/OFF button. The blue frame indicating the next sequence disappears after the last image. T o cancel the last captured image, pr ess and hold the ON/OFF button. T o cancel the multi-image screen, press and r elea ...

  • Canon MV600i - page 68

    68 Using the Full Range of Features E T urning Off the Image Stabilizer The image stabilizer allows you to obtain steady recordings even at telephoto. There is no need to turn off the image stabilizer during normal recording. However , the camcorder tries to compensate for horizontal movements and you may therefore decide to turn it off during pann ...

  • Canon MV600i - page 69

    69 Using the Full Range of Features E Recording With the Self-Timer 1. Press the (self-timer) button. “ ” appears. When recor ding movies 2. Press the start/stop button. The camcorder starts r ecording after a 10-second countdown (2 seconds when using the wireless contr oller). The count down appears on the screen. 3. Press the start/stop butto ...

  • Canon MV600i - page 70

    70 Using the Full Range of Features E Audio Recording Changing the Audio Mode Y ou can record sound in two audio modes — 16-bit and 12-bit. The 12-bit mode records sound on two channels (stereo 1), leaving 2 channels free (stereo 2) for adding new sound later . Select the 16-bit mode for higher sound quality . * MV650i/MV630i/MV600i only . Open t ...

  • Canon MV600i - page 71

    71 Using the Full Range of Features Wind Screen Y ou can reduce the wind noise when recording in windy places. Open the menu and select [AUDIO SET UP]. Select [WIND SCREEN], set it to [ON] and close the menu. “WS ON” appears when you turn the wind screen on. ❍ Low sound may be reduced together with the wind noise. W e recommend turning off th ...

  • Canon MV600i - page 72

    72 Using the Full Range of Features E Using the VL-3 Video Light (Optional) This video light enables you to record brightly in colour even in dark places. This VL-3 Video Light attaches to the camcorder ’ s advanced accessory shoe for cable-free operation and is powered by the camcorder ’ s power supply . Refer also to the VL-3 Video Light inst ...

  • Canon MV600i - page 73

    73 Using the Full Range of Features E Using the DM-50 Micr ophone (Optional) The high sensitive Directional Stereo Microphone DM-50 attaches to the advanced accessory shoe for cable-free operation and is powered by the camcorder ’ s power supply . Use it for recording or dubbing audio. Refer also to the DM-50 Microphone instruction manual. ❍ Al ...

  • Canon MV600i - page 74

    74 Using the Full Range of Features E Adjusting the Focus Manually Some subjects may not be suitable for autofocus. In such case, focus manually . Autofocus may not work well on the following subjects: 1. Set the program selector to Q . 2. Adjust the zoom. When you operate the zoom after adjusting the focus, the subject may not stay in focus. Adjus ...

  • Canon MV600i - page 75

    75 Using the Full Range of Features 5. Press the FOCUS button to return to autofocus. The setting resets to autofocus when you switch the pr ogram selector to [ . Infinity Focus Use this function when you wish to focus on faraway subjects such as mountains or fireworks. Press the focus button mor e than 3 seconds in step 3. “MF ∞ ” appears. W ...

  • Canon MV600i - page 76

    76 Using the Full Range of Features E Adjusting the AE Shift Y ou can adjust the AE (auto exposure) function to lighten or darken the image. This allows you to compensate for backlit or overexposed scenes. Available Levels: – 2 to +2, in 0.25 intervals (excluding – 1.75 and +1.75). 1. Set the program selector to Q . 2. Set the program AE mode t ...

  • Canon MV600i - page 77

    77 Using the Full Range of Features E Setting the Shutter Speed In the Auto mode, you can adjust the shutter speed manually to make stable shots of fast moving subjects. 1. Set the program selector to Q . 2. Set the program AE mode to the Auto mode. 3. Open the menu and select [CAMERA SET UP]. 4. Select [SHUTTER]. 5. Select the shutter speed and pr ...

  • Canon MV600i - page 78

    78 Using the Full Range of Features ❍ Guidelines for Recording with High Shutter Speeds: - Outdoor sports such as golf or tennis: 1/2000 - Moving objects such as cars or roller coasters: 1/1000, 1/500 or 1/250 - Indoor sports such as basketball: 1/120 E 3_D73PAL_E(43-85) 02.12.26 9:26 PM Page 78 ...

  • Canon MV600i - page 79

    79 Using the Full Range of Features E Setting the White Balance The camcorder ’ s auto white balance system adjusts the colours to appear natural for different lighting conditions. However , you can use the preset modes to reproduce colours more accurately , or set a custom white balance to obtain the optimal setting. ❍ When the program selecto ...

  • Canon MV600i - page 80

    80 Using the Full Range of Features For T (Indoor) or U (Outdoor) Setting: 1. Set the program selector to Q . 2. Open the menu and select [CAMERA SET UP]. 3. Select [WHITE BAL.]. 4. Select T (indoor) or U (outdoor). T or U appears. 5. Close the menu. For Custom White Balance: 1. Set the program selector to Q . 2. Open the menu and select [CAMERA SE ...

  • Canon MV600i - page 81

    81 Using the Full Range of Features E Magnifying the Image The playback image can be magnified by 2 times. 1. Move the zoom lever toward T . • The image is magnified by 2 times. • A frame appears indicating the position of the enlarged part. 2. Move the image. • T urn the selector dial to move the image to the right and left, or up and down. ...

  • Canon MV600i - page 82

    82 Using the Full Range of Features E Displaying the Data Code Once date and time are set, the camcorder maintains a data code containing recording date and time and other camera data such as shutter speed and exposure (f-stop). (MV650i/MV630i: Only date and time appear when playing back a memory card). ❍ The data code display turns off when you ...

  • Canon MV600i - page 83

    83 Using the Full Range of Features Selecting the Date/Time Display Combination Open the menu and select [DISPLA Y SET UP]. Select [D/TIME SEL.], set it to [DA TE] or [TIME] and close the menu. Selecting the Data Code Display Combination Open the menu and select [DISPLA Y SET UP]. Select [DA T A CODE], set it to [DA TE/TIME], [CAMERA DA T A] or [CA ...

  • Canon MV600i - page 84

    84 Using the Full Range of Features E Photo Search/Date Sear ch Y ou can search for a still image recorded anywhere on the tape with the photo search function, or locate the change of the date/time zone with the date search function. 1. Press the SEARCH SELECT button to choose between photo search and date sear ch. “PHOTO SEARCH” or “DA TE SE ...

  • Canon MV600i - page 85

    85 Using the Full Range of Features E Retur ning to a Pr e-marked Position If you wish to return to a particular scene later , mark the point with the zero set memory and the tape will stop at that point when you rewind/fast forward the tape. 1. Press the ZERO SET MEMOR Y button at the point you wish to return to later . • “0:00:00 Â ” appea ...

  • Canon MV600i - page 86

    86 Editing E Recording to a VCR or Digital V ideo Device Y ou can copy your recordings by connecting the camcorder to a VCR or a digital video device. If you connect a digital video device, you can copy recordings with virtually no generation loss in image and sound quality . When connecting a VCR: ❍ Make sure that “ H ” is not displayed on t ...

  • Canon MV600i - page 87

    87 Editing E Connecting a Digital Video Device Refer also to the instruction manual of the digital video device. Side with an arrow 4 pin – 4 pin: CV -150F DV Cable (optional) 4 pin – 6 pin: CV -250F DV Cable (optional) Signal flow 4_D73PAL_E(86-98) 02.12.26 9:28 PM Page 87 ...

  • Canon MV600i - page 88

    88 Editing E Recording fr om Analog Video Devices (VCR, TV or Camcorder) Y ou can record videos or TV programs from a VCR or analog camcorder on the tape in the camcorder . ❍ Anomalous signals sent from the connected device may be r ecorded as anomalous picture (although it may not appear so on the scr een), or it may not be recor ded at all. ❍ ...

  • Canon MV600i - page 89

    89 Editing E Recording fr om Digital Video Devices (DV Dubbing) Y ou can record from other digital video devices equipped with a DV terminal with virtually no loss in picture and sound quality . ❍ When recor ding from digital video devices, make sur e that “A V DV” is not displayed on the screen. If “A V DV” is displayed, change the s ...

  • Canon MV600i - page 90

    90 Editing Concerning Copyright Copyright Precaution Certain pre-recorded video tapes, films and other materials, as well as some television programmes are copyrighted. Unauthorised recording of these materials may violate copyright protection laws. Copyright Signals During playback: If you try to play back a tape that contains copyright control si ...

  • Canon MV600i - page 91

    91 Editing E Conver ting Analog Signals into Digital Signals (Analog-Digital Converter) By connecting the camcorder to a VCR or 8mm video camcorder , you can convert analog video/audio signals to digital signals and output the digital signals via the DV terminal. The DV terminal serves as output terminal only . ❍ Headphones cannot be used during ...

  • Canon MV600i - page 92

    92 Editing T urning On the Analog-Digital Converter Press the A V DV button on the wireless contr oller . OR Open the menu and select [VCR SET UP]. Select [A V DV OUT], set it to [ON] and close the menu. ❍ For normal use, set [A V DV OUT] to [OFF] (so that “A V DV” does not appear on the screen). If it is set to [ON], digital signals ...

  • Canon MV600i - page 93

    93 Editing E Replacing Existing Scenes (A V Inser t) Y ou can insert and replace images/audio on the tape of the camcorder with images/audio from other video devices connected via A V terminal or DV terminal. ❍ Make sure that “ H ” is not displayed on the scr een. If “ H ” is displayed, change the setting ( 37). ❍ Y ou cannot insert fro ...

  • Canon MV600i - page 94

    94 Editing Example: A V Insert from a VCR 1. Connect the camcorder to the VCR. See Playing Back on a TV Screen ( 39). 2. VCR: Load a recorded cassette. Locate the scene you wish to insert and pause playback shortly before the scene. 3. Set the camcorder to PLA Y (VCR) mode and load a recorded cassette. Make sure the tape-pr otect switch is set to a ...

  • Canon MV600i - page 95

    95 Editing E Audio Dubbing Y ou can add sound from audio devices (AUDIO IN) or with the built-in or an external microphone (MIC. IN). With the MV600, audio dubbing can only be performed with the built-in or an external microphone (MIC. IN). ❍ Use only tapes recor ded in SP mode 12-bit audio sound with this camcorder . Audio dubbing will stop if t ...

  • Canon MV600i - page 96

    96 Editing E Using a Microphone ❍ When using the built-in microphone: do not connect any cables to the microphone terminal or the accessory shoe. ❍ When using an external microphone: Connect it to the microphone terminal. ❍ When using the DM-50 Microphone: Do not connect any cables to the microphone terminal. ❍ When you connect a TV via the ...

  • Canon MV600i - page 97

    97 Editing E 7. Press the STOP 3 button on the wireless contr oller to stop dubbing. Audio device: Stop playback. Set the zero set memory at the end of the scene you wish to dub audio. The camcorder will automatically stop audio dubbing at that point. Playing Back the Added Sound Y ou can select to play back Stereo 1 (original sound), Stereo 2 (add ...

  • Canon MV600i - page 98

    98 Editing E Connecting to a Computer Using a DV (IEEE1394) Cable Y ou can transfer recordings to a computer equipped with a DV (IEEE1394) terminal or IEEE1394 capture board (optional software required). Use the optional CV -150F (4 pin–4 pin) or CV -250F (4 pin– 6 pin) DV Cable. ❍ Do not disconnect the DV cable, or turn off the camcorder or ...

  • Canon MV600i - page 99

    99 Using a Memory Card MV630i MV650i E Inserting and Removing the Memor y Card The chapter Using a Memory Card ( 99 - 132) refers to functions of the MV650i and MV630i only . Y ou can use SD Memory Cards or a commercially available MultiMediaCards with this camcorder . The SD Memory Card has a protect switch for prevent accidental erasure. ❍ This ...

  • Canon MV600i - page 100

    100 Using a Memory Card MV630i MV650i E Selecting the Image Quality/Size Changing the Still Image Quality Y ou can choose between Superfine, Fine and Normal. Open the menu and select [CARD SET UP]. Select [SI QUALITY], set it to [SUPER FINE] or [NORMAL] and close the menu. Changing the Still Image Size Y ou can choose between 1024 × 768 pixels and ...

  • Canon MV600i - page 101

    101 Using a Memory Card MV630i MV650i E ❍ The indication may not decrease even though a r ecording has been made, or may decrease by 2 images at once. ❍ All indicators are displayed in gr een when a memory card is played back. ❍ The remaining image capacity indicates the number of still images, even when movies are r ecorded. Changing the Mov ...

  • Canon MV600i - page 102

    102 Using a Memory Card MV630i MV650i E T o change the setting, open the menu and select [CARD SET UP]. Select [FILE NOS.], set it to [RESET] and close the menu. CARD PLA Y (VCR) CARD CAMERA PLA Y (VCR) CAMERA FILE NOS.•••CONTINUOUS CARD SET UP 101-0101 101 101-0102 101-0104 101 101-0101 101 101-0103 CONTINUOUS RESET When you record 3 images ...

  • Canon MV600i - page 103

    103 Using a Memory Card MV630i MV650i E Recording Still Images on a Memory Car d Y ou can record still images with the camcorder , from a tape in the camcorder ( 104), or from devices connected via the DV terminal or A V terminal ( 105). ❍ Do not turn off the camcorder , disconnect the power source or remove the memory card while the car d access ...

  • Canon MV600i - page 104

    104 Using a Memory Card MV630i MV650i Recording fr om a T ape in the Camcorder Y ou can record images from a tape in the camcorder as still images on a memory card. 1. Set the camcorder to PLA Y (VCR) mode. 2. Play back the tape. 3. Press the PHOTO button halfway when the scene you wish to recor d appears. • The camcorder pauses playback. The rem ...

  • Canon MV600i - page 105

    105 Using a Memory Card MV630i MV650i E Recording fr om Other Video Devices Y ou can record images from devices connected via the S-video terminal or AV terminal (analog line-in function), or via the DV terminal as still images on a memory card. When recor ding via the A V terminal, make sure that “A V DV” is displayed on the screen. When r e ...

  • Canon MV600i - page 106

    106 Using a Memory Card MV630i MV650i E Recording Panoramic Images (Stitch Assist Mode) Y ou can shoot a series of overlapping images and merge them into one large panoramic scene using the supplied software (PhotoStitch) on a computer . When Recording in Stitch Assist Mode: PhotoStitch detects the overlapping portion of adjoining images and merges ...

  • Canon MV600i - page 107

    107 Using a Memory Card MV630i MV650i E ❍ Compose each image so that it overlaps 30 to 50% of the adjoining image. T r y to keep the vertical misalignment within 10%. ❍ Do not include moving subject in the overlapping portion. ❍ Do not try to stitch images that include both distant and close subjects. They may appear warped or doubled up. 5_D ...

  • Canon MV600i - page 108

    108 Using a Memory Card MV630i MV650i E Recor ding Motion JPEG Movies on a Memor y Car d Y ou can record Motion JPEG movies with the camcorder , from a tape in the camcorder ( 109), or from devices connected via the A V terminal (analog line-in) or the DV terminal ( 109). ❍ Do not turn off the camcorder , disconnect the power source or remove the ...

  • Canon MV600i - page 109

    109 Using a Memory Card MV630i MV650i Recording fr om a T ape in the Camcorder Y ou can record movies from a tape in the camcorder on a memory card. 1. Set the camcorder to PLA Y (VCR) mode. 2. Play back the tape. 3. Press the start/stop button when the scene you wish to recor d appears. Y ou can recor d up to 10 seconds in 320 × 240 and up to 30 ...

  • Canon MV600i - page 110

    110 Using a Memory Card MV630i MV650i E Playing Back a Memor y Car d Y ou can play back memory card images on the LCD screen, viewfinder screen, or on a connected TV screen (see Playing Back on a TV Screen ( 39)). Y ou can display a single image (single image display 110), 6 at one time (index screen 111), or one after another (slide show 111). Use ...

  • Canon MV600i - page 111

    111 Using a Memory Card MV630i MV650i E Index Screen 1. In single image display , press the (index scr een) button. • Up to 6 images appear . • Movies are displayed with the first scene as a still image indicated by “ ”. 2. Press the CARD +/ – button to change the image selection. 3. Move the mark to the image you wish to view . • T urn ...

  • Canon MV600i - page 112

    112 Using a Memory Card MV630i MV650i Card Jump Function Y ou can locate still images/movies without displaying them one by one. The number in the upper right of the screen indicates the image number of the current image by the total number of images. In single image display , press and hold the CARD + or CARD – button. • Press the CARD + butto ...

  • Canon MV600i - page 113

    113 Using a Memory Card MV630i MV650i E Protecting Images Y ou can protect important images from accidental erasure during single image display or index screen display . If a memory card is formatted, all images, even pr otected ones, will be erased permanently . ❍ The sample images recor ded on the supplied SD Memory Card ar e already protected. ...

  • Canon MV600i - page 114

    114 Using a Memory Card MV630i MV650i E Erasing Images Y ou can erase images singly or all at once. Be careful when erasing images. Erased images cannot be r ecovered. ❍ Protected images cannot be erased. ❍ Movies can only be erased when the first or last scene is displayed as a still image. They cannot be erased in playback pause mode. ❍ Mak ...

  • Canon MV600i - page 115

    115 Using a Memory Card MV630i MV650i E Selecting Still Images for Printing (Print Or der) Y ou can select still images for printing and set the number of copies. These print order settings are compatible with the Digital Print Order Format (DPOF) standards. ❍ Make sure to insert a memory car d that contains images. ❍ A maximum of 200 still ima ...

  • Canon MV600i - page 116

    116 Using a Memory Card MV630i MV650i Erasing All Print Orders 1. In single image display , open the menu and select [CARD OPERA TIONS]. 2. Select [ PRINT ORDERS ALL ERASE]. “ERASE ALL PRINT ORDERS?”, [NO] and [YES] appears. 3. Select [YES]. All “ ” disappear . 4. Select [ b RETURN] to close the menu. CARD PLA Y (VCR) CARD CAMERA PLA Y (VCR ...

  • Canon MV600i - page 117

    117 Using a Memory Card MV630i MV650i E Printing with the Direct Print Function Y ou can print still images by connecting the camcorder to a Canon Bubble Jet Printer with Direct Print function. The Direct Print function can also be used with the print order settings ( 115). ❍ Observe the following precautions during printing, otherwise printing m ...

  • Canon MV600i - page 118

    118 Using a Memory Card MV630i MV650i E Printing 1. In single image display , select the still image you wish to print and press the selector dial. The print setting menu appears. 2. Set the number of copies and the print style. • Selecting the Number of Copies . • Setting the Print Style . 3. Select [Print] and press the selector dial. Printin ...

  • Canon MV600i - page 119

    119 Using a Memory Card MV630i MV650i E Selecting the paper size: 1. In the print setting menu, tur n the selector dial to select [Style] and press the selector dial. 2. Make sure that is selected and press the selector dial. 3. T ur n the selector dial to select the paper size and pr ess the selector dial. 4. Press the MENU button. Y ou return to ...

  • Canon MV600i - page 120

    120 Using a Memory Card MV630i MV650i E Printing with Print Order Settings Y ou can print still images you have selected with the Print Order function. If you wish to print more than 1 copy , set the number of copies in the print order ( 115) . 1. Connect the printer to the camcorder ( 117). 2. Press the MENU button. 3. Select [ PRINT]. • The p ...

  • Canon MV600i - page 121

    121 Using a Memory Card MV630i MV650i E Combining Images (Card Mix) Y ou can produce effects not possible with just a tape with the Card Mix function. Choose one of the sample images provided on the supplied SD Memory Card (such as picture frames, backgrounds and animations) and combine it with the live video recording. ❍ Card Mix cannot be used ...

  • Canon MV600i - page 122

    122 Using a Memory Card MV630i MV650i E Card Luminance Key (CARD LUMI.) Combines illustrations or title with your recordings. The live video recording will appear in place of the light area of the card mix image. Y ou can create your own title or illustration by drawing on a white paper and recording it to the memory card. Mix level adjustment: lig ...

  • Canon MV600i - page 123

    123 Using a Memory Card MV630i MV650i E Selecting the Card Mix Ef fect 1. Set the program selector to Q . 2. Open the menu and select [ CARD MIX]. The card mix menu appears. 3. Select the image you wish to combine with the CARD +/ – button. 4. Select [MIX TYPE]. [CARD CHROMA], [CARD LUMI.], [CAM. CHROMA] and [C. ANIMA TION] appears. 5. Select t ...

  • Canon MV600i - page 124

    124 Using a Memory Card MV630i MV650i E Recording with the Car d Mix Effect Movie: 1. Press the start/stop button to begin recor ding. The combined image is recor ded on the tape. 2. Press the start/stop button to end recor ding. Still Image: 1. Press the PHOTO button halfway . F flashes in white and turns green when focus is adjusted. 2. Press the ...

  • Canon MV600i - page 125

    125 Using a Memory Card MV630i MV650i E Copying Still Images Y ou can copy still images from tape to memory card, or from memory card to tape. ❍ All still images from the selected still image onwar d will be copied. ❍ The image size of a still image copied from tape to memory car d will be 640 × 480. ❍ The data code of the still image reflec ...

  • Canon MV600i - page 126

    126 Using a Memory Card MV630i MV650i E Copying Still Images from Memory Car d to T ape Load a cassette with enough free space, and insert a recorded memory card. Make sure that the protect tab on the cassette is set to allow recording. 1. Select the first still image you wish to copy with the CARD +/ – buttons. T o copy all still images from the ...

  • Canon MV600i - page 127

    127 Using a Memory Card MV630i MV650i E Formatting a Memor y Card Format new memory cards, or when you get the message “CARD ERROR”. Y ou can also format a memory card to erase all images recorded on it. The camcorder formats memory cards in the Design rule for Camera File system (DCF) standard. ❍ Formatting a memory card erases all data, inc ...

  • Canon MV600i - page 128

    128 Using a Memory Card MV630i MV650i E Connecting to a Computer Using a USB Cable Y ou can download images from the memory card to a computer using the supplied USB cable. With the supplied software, you can easily download, browse and archive images, and arrange still images for printout. For instructions on how to connect the camcorder to the co ...

  • Canon MV600i - page 129

    129 Using a Memory Card MV630i MV650i E Creating a Start-up Image Y ou can create a start-up image using a still image on the memory card or a sample start-up image provided on the DIGIT AL VIDEO SOLUTION DISK and save it as [MY IMAGE]. ❍ Make sure to insert a memory car d with enough remaining capacity . ❍ Before you cr eate a start-up image, ...

  • Canon MV600i - page 130

    130 Using a Memory Card MV630i MV650i E Memory Card Information Images recorded on a memory card with this camcorder can be transferred to a computer using the following products for SD Memory Cards or MultiMediaCards: PC Card Adapter: An adapter to insert a memory card into the card slot on the computer . USB Reader/Writer: Connects to the USB por ...

  • Canon MV600i - page 131

    131 Using a Memory Card MV630i MV650i E Sample Images 27 sample images are pre-recorded on the supplied SD Memory Card: 8 card chroma key images, 5 card luminance key images, 2 camera chroma key images and 12 card animation images. Card Chr oma Key Card Luminance Key Camera Chroma Key Card Animation 5_D73PAL_E(99-132) 02.12.26 9:31 PM Page 131 ...

  • Canon MV600i - page 132

    132 Using a Memory Card MV630i MV650i E The sample images recor ded on the supplied SD Memory Card ar e intended only for the personal use with this camcorder . Do not use these sample images for other purposes. If you have mistakenly erased the Card Mix sample images on the supplied SD Memory Card, they can be downloaded fr om the following homepa ...

  • Canon MV600i - page 133

    133 Additional Information E Screen Displays LCD Screen Displays Y ou can hide the displays on the LCD screen to have a clear screen for playback. Open the menu and select [DISPLA Y SET UP]. Select [DISPLA YS], set it to [OFF <PLA YBK>] and close the menu. • The LCD screen will become completely blank (also the TV screen if connected). • ...

  • Canon MV600i - page 134

    134 Additional Information Screen Displays during Basic Recor ding/Playback indicates flashing. CAMERA mode (battery pack attached): • Remote sensor mode and audio mode disappear after 4 seconds. PLA Y (VCR) mode: • Remote sensor mode and volume bar disappear after 4 seconds. E : Backup battery ( 17) : Condensation warning ( 142) Time code ( 85 ...

  • Canon MV600i - page 135

    135 Additional Information E Screen Displays during Advanced Recor ding/Playback CAMERA Mode * ** and MV630i MV650i MV650i 1/100 CARD MIX FADE–T 1 2 bit 16:9 1 sec PHOTO WS ON 12:00 PM 1.JAN.2003 T W P S AE MF 0 + – Zoom ( 28) Recording mode ( 53) Self-timer ( 69) Headphones ( 37) Wind screen ( 70) 16:9 mode ( 51) Photo mode ( 54) Accessory att ...

  • Canon MV600i - page 136

    136 Additional Information E CARD CAMERA Mode * MV650i MV630i MV650i 50 1024 320 1/120 1 2 CLOSE 12:00 PM 1.JAN.2003 T W 0 AE MF S.FINE Accessory attached to the Advanced Accessory shoe* ( 72) Recording on a memory card ( 103) Still image quality ( 100) Movie size* ( 101) Still image size ( 100) Self-timer ( 69) Stitch assist ( 106) Remaining card ...

  • Canon MV600i - page 137

    137 Additional Information E List of Messages Message Explanation You have not set the time zone, date and time. This message appears each time you turn the power on until you set the time zone, date and time. Battery pack is exhausted. Replace or charge the battery pack. Cassette is protected. Replace the cassette or change the position of the pro ...

  • Canon MV600i - page 138

    138 Additional Information E Message Explanation Memory card not is inserted into the camcorder. SD Memory Card is set for erasure prevention. Replace the card or change the position of the protect switch. No images are recorded on the memory card. A memory card error occurred. The camcorder cannot record or play back the image. The error may be te ...

  • Canon MV600i - page 139

    139 Additional Information E Direct Print Related Messages MV630i MV650i Message Explanation Paper cassette is not correctly inserted or is out of paper. The paper jammed during printing. The ink cartridge is not inserted or is out of ink. The printer is experiencing a data transmission error. You attempted to use the print order settings to print ...

  • Canon MV600i - page 140

    140 Additional Information E Maintenance Camcorder Handling Pr ecautions ❍ Do not carry the camcorder by the LCD panel or viewfinder . ❍ Do not leave the camcorder in places subject to high temperatures, such as a sun- heated car , and high humidity . ❍ Do not use the camcorder in places subject to magnetic or electric fields such as near the ...

  • Canon MV600i - page 141

    141 Additional Information ❍ At cold temperatures, the screen may be darker than usual. This is not a malfunction. The screen returns to normal when the camcorder warms up. Viewfinder ❍ Rotate the viewfinder upward. Remove the protect cover and clean the glass with a cotton swab. Reattach the protect cover when finished. ❍ Be careful not to s ...

  • Canon MV600i - page 142

    142 Additional Information E Condensation Moving the camcorder rapidly between hot and cold temperature may cause condensation (water droplets) to form on its internal surfaces. Stop using the camcorder if condensation is detected. Continued use may damage the camcorder . Condensation may form in the following cases: How to avoid condensation: ❍ ...

  • Canon MV600i - page 143

    143 Additional Information E Using the Camcorder Abr oad Power Sources Y ou can use the compact power adapter to operate the camcorder and to charge battery packs in any country with power supply between 100 and 240 V AC, 50/60 Hz. Consult the Canon Service Centre for information on plug adapters for overseas use. Playback on a TV Screen Y ou can o ...

  • Canon MV600i - page 144

    144 Additional Information E T roubleshooting If you have a problem with your camcorder , refer to this checklist. Consult your dealer or a Canon Service Centre if the problem persists. Power Source Recording/Playback Problem Cause Solution Battery pack is exhausted. Battery pack is not correctly attached. Battery pack is exhausted. Power save func ...

  • Canon MV600i - page 145

    145 Additional Information Recording Playback E Problem Cause Solution Camcorder is not set to CAMERA mode. Time zone, date and time are not set, or the backup battery is exhausted. Camcorder is turned off. Cassette is not loaded. Tape reached the end ( flashes on the screen). Cassette is protected ( v flashes on the screen). Camcorder is set to a ...

  • Canon MV600i - page 146

    146 Additional Information E Memory Card Operation MV630i MV650i Problem Cause Solution Memory card was not facing the correct direction. Memory card is full. Memory card is not formatted. Memory card is not inserted. File number reached maximum value. SD Memory Card is protected. Camcorder is not set to CARD PLAY (VCR) mode. Memory card is not ins ...

  • Canon MV600i - page 147

    147 Additional Information E System Diagram (A vailability differs fr om area to ar ea) MV650i MV630i MultiMediaCard IFC-300PCU USB Cable PC Card Adapter USB Reader/Writer FD Adapter BP-900 Series Battery Pack* VL-10Li Battery Video Light Stereo Microphone (commercially av ailable) WL-D80 Wireless Controller WL-D79 Wireless Controller MiniD V Video ...

  • Canon MV600i - page 148

    148 Additional Information E Optional Accessories Call or visit your local retailer/dealer for genuine Canon video accessories. BP-500 Series Battery Packs When you need extra battery packs, select from the following: BP-511, BP-512, BP-522 or BP-535. CG-570 Battery Charger The battery charger can be used with the supplied CA-570 Compact Power Adap ...

  • Canon MV600i - page 149

    149 Additional Information E WD-30.5 Wide-converter This lens decreases focal length by a factor of 0.7, giving you a wide perspective for indoor shots or panoramic views. FS-30.5U Filter Set Neutral density and MC protector filters help you to control difficult lighting conditions. VL-10Li Battery Video Light This compact yet powerful video light ...

  • Canon MV600i - page 150

    150 Additional Information E SC-1000 Soft Carrying Case A handy camcorder bag with padded compartments and plenty of space for accessories. This mark identifies genuine Canon video accessories. When you use Canon video equipment, we recommend Canon-brand accessories or products bearing the same mark. C A N O N G E N U I N E V I D E O A C C E S S O ...

  • Canon MV600i - page 151

    151 Additional Information E Specifications MV650i/MV630i/MV600i/MV600 7.4 V DC 2.9 W (Using viewfinder), 3.8 W (Using LCD screen) CCIR standard (625 lines, 50 fields) PAL colour signal 2 rotary heads, helical scanning DV system (Consumer digital VCR SD system); Digital component recording PCM digital sound: 16 bit (48 kHz/2 ch); 12 bit (32 kHz/4 c ...

  • Canon MV600i - page 152

    152 Additional Information E Weight and dimensions are approximate. Errors and omissions excepted. Subject to change without notice. SDC-8M SD Memory Card 8 MB SD Memory Card standard 0 – 40 ˚ C 32 × 24 × 2.1 mm 2 g Capacity: Interface: Operating temperature: Dimensions: Weight: mini-B Special 4-pin connector (IEEE 1394 compliant) ø 3.5 mm mi ...

  • Canon MV600i - page 153

    153 Additional Information E Index 12bit audio . . . . . . . . . . . . . . . . . . 97 16:9 wide screen . . . . . . . . . . . . . . 51 6-second auto date . . . . . . . . . . . . 83 Abroad, using the camcorder . . . 143 Accessories. . . . . . . . . . . . . . . . 7, 148 Accessory shoe . . . . . . . . . . . . . . 149 Advanced accessory shoe * 1 . . . . ...

  • Canon MV600i - page 154

    154 Additional Information E MIC terminal . . . . . . . . . . . . . . . . . 70 Movie size * 1 . . . . . . . . . . . . . . . . 101 MultiMediaCard * 2 . . . . . . . . . . . 100 Multi-image screen . . . . . . . . . . . . 66 My Camera settings . . . . . . . . . . . 49 Night mode . . . . . . . . . . . . . . . . . . 58 Output channel . . . . . . . . . . ...

  • Canon MV600i - page 155

    CANON INC. Canon Europa N.V . P .O. Box 2262, 1180 EG Amstelveen, the Netherlands Canon UK Ltd. Ribcon Way Luton Bedfordshire LU4 9UR T elephone 0870-241-2161 Canon Australia Pty . Ltd 1 Thomas Holt Drive, North Ryde, N.S.W . 2113, Australia T elephone 805-2000, Fax 887-4484 Canon New Zealand Ltd Akoranga Business Park, Akoranga Drive, Northcote, A ...

Manufacturer Canon Category Camcorder

Documents that we receive from a manufacturer of a Canon MV600i can be divided into several groups. They are, among others:
- Canon technical drawings
- MV600i manuals
- Canon product data sheets
- information booklets
- or energy labels Canon MV600i
All of them are important, but the most important information from the point of view of use of the device are in the user manual Canon MV600i.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Canon MV600i, service manual, brief instructions and user manuals Canon MV600i. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Canon MV600i.

Similar manuals

A complete manual for the device Canon MV600i, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Canon MV600i by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Canon MV600i.

A complete Canon manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Canon MV600i - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Canon MV600i, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Canon MV600i, that we can find in the current document
3. Tips how to use the basic functions of the device Canon MV600i - which should help us in our first steps of using Canon MV600i
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Canon MV600i
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Canon MV600i in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Canon MV600i?

Use the form below

If you did not solve your problem by using a manual Canon MV600i, ask a question using the form below. If a user had a similar problem with Canon MV600i it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)