Manual Allied Telesis AT-2716POE

91 pages 1.71 mb
Download

Go to site of 91

Summary
  • Allied Telesis AT-2716POE - page 1

    613-001265 Rev. A AT-2716POE Fast Ethernet Fiber & PoE Adapter Installation and Users Guide 2317 T AT I TX F X ...

  • Allied Telesis AT-2716POE - page 2

    Copyright © 2011 Allied Telesis, Inc. All rights reserved. No part of this publication may be repr o duced without prior w ritten permission from Allied Telesis, Inc. Allied Telesis and the Allied Telesis logo are trademarks of Allied Telesis, Incorp orated. All other product names, company names, logos or oth er designations ment ioned herein ar ...

  • Allied Telesis AT-2716POE - page 3

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 3 Electrical Safet y and E m is s ion s Standards This product meets the following standards: Federal Communications Comm ission Interference Statement Declara tion of Conform ity Manufacturer N am e: Allied Tel es i s , Inc. Declares that t he product: F ast Et ...

  • Allied Telesis AT-2716POE - page 4

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 4 RFI Emissions FCC Class A Immunity EN55024 Electrical Safety EN60950 - 1 (TUV), UL 60950 - 1 (CULUS) Laser Safety EN60825 Translated Safety S t atements Important: The indicates that a translation of the safety statement is available in a PDF d ocument titled ...

  • Allied Telesis AT-2716POE - page 5

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 5 Contents Preface .........................................................................................9 Safety Symbols Used in this Document.......................................................................................10 Where to Find Management S ...

  • Allied Telesis AT-2716POE - page 6

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 6 Contents Updating the 802.3az EEE property ......................................................70 Updating the ARP Offload property ......................................................70 Updating the EEE Control Policies property .......................... ...

  • Allied Telesis AT-2716POE - page 7

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 7 Figures Figure 1. AT - 2716POE Adapter. . .................................... . ...........................14 Figure 2. AT - 2716POE LEDs. . ...................................... . ............................15 Figure 3. Removing the PC Cover............... ...

  • Allied Telesis AT-2716POE - page 8

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 8 ...

  • Allied Telesis AT-2716POE - page 9

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 9 Preface This guide contains instructions on how to install the AT- 2716POE Fast Ethernet Fiber & PoE Adapter. Procedures that describe how to install and configure the driver software on the Windows XP, Windows Vista, and Windows 7 Operating Systems are pr ...

  • Allied Telesis AT-2716POE - page 10

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 10 Safety Symbols Used i n th is Document This document uses the safety symbols defined in Table 1. T able 1. Safety Symbols Symbol Meaning Description Caution Performing or omitting a specific action may result in equipment damage or loss of data. Warning Perfo ...

  • Allied Telesis AT-2716POE - page 11

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 11 Where to Find Manageme nt Software Upda tes and Product Information New releases of management software are on the Allied Telesis web site. In addition, the installation and user guides a re available for all Allied Telesis products in portable document forma ...

  • Allied Telesis AT-2716POE - page 12

    AT-2716POE Fast Etherne t Fiber & PoE Adapter Install ation and User’s Guide 1 2 Contacting Allied Telesis This section provides Allied Telesis contact information for technical support as well as sales or corporate information. Online Support You can request technical support onli ne by accessing the Allie d Telesis Knowledge Base at www.all ...

  • Allied Telesis AT-2716POE - page 13

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 13 Chapter 1 Introduction to the AT - 2716POE F ast Ethernet Fiber & PoE Adapter This chapter provides an introduction to the AT- 2716POE Fast Ethernet Fiber & PoE Adapter and discusses the following topics:  “Functional Description” on page 14 ? ...

  • Allied Telesis AT-2716POE - page 14

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 14 Functional D escription The AT- 2716POE Fast Ethernet Fiber & PoE Adapter is a highly integrated dual - port adapter based on Broadcom’s BCM5718 chipset. The primary data port is 100FX fiber. The secondary port is a 1 Gigabit copper port which can suppo ...

  • Allied Telesis AT-2716POE - page 15

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 15 LEDs The AT- 2716POE adapter has two LEDs located on the copper port. See Figure 2. The left LED, labeled TX , indicates the link and activity status of the 1 Gigabit copper port that has PoE capabilities. The r ight LED, labeled FX, indicates the link and ac ...

  • Allied Telesis AT-2716POE - page 16

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 16 AT - 2716POE Adap ter Software Drivers You can download the latest version of the software driver and our configuration for the AT- 2716POE adapter from the Allied Telesis website at www.alliedtelesis.com/support/software . After you have accessed this websit ...

  • Allied Telesis AT-2716POE - page 17

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 17 Chapter 2 Installing the Hardware The AT- 2716POE Fast Ethernet Fiber & P oE Adapter can be installed in a ny system with an appropriate PCIe slot. This chapter describes how to install the adapter and discusses the following topics:  “Reviewing Safe ...

  • Allied Telesis AT-2716POE - page 18

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 18 Rev iewing Safe ty Precautions Please review the following safety precautions before you begin to install the network adapter card. Note The indicates that a translation of the safety statement is available in a PDF document titled “Translated Safety Statem ...

  • Allied Telesis AT-2716POE - page 19

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 19 Warning The adapter is being installed in a system that operates with voltages that can be lethal. Before you remove the cov er of your system, you must observe the following precautions to protect yourself and to prevent damage to the system components.  ...

  • Allied Telesis AT-2716POE - page 20

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 20 Checking the Contents of Your Shipment The following items are included with your adapter:  Antistatic bag (used for protecting the ada pter when stored or shipped). Keep the adapter in its packaging until ready for installation.  Standard profile brack ...

  • Allied Telesis AT-2716POE - page 21

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 21 Pre- Installation C h ecklist Before you install an adapter card, do the following: 1. Check that your system has an appropriate open PCIe slot. 2. For the PoE feature, check that you system has an appropriate SATA or IDE power connector available on y our sy ...

  • Allied Telesis AT-2716POE - page 22

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 22 Installing a Network Ad apter Card The following instructions apply to i nstalling an AT- 2716POE adapter in most systems. If you need more information, refer to the manuals that were supplied with your system for details about performing these tasks on your ...

  • Allied Telesis AT-2716POE - page 23

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 23 3. Select any appropriate empty, non - shared PCIe slot and remove the faceplate . If you do not know how to identify an appropriate PCIe slot, refer to your system documentation. Keep the faceplate in a safe place. You may need it for future use. See Figure ...

  • Allied Telesis AT-2716POE - page 24

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 24 Make sure the card is securely seated. See Figure 5. Figure 5. Inserting the Network Adapter Card Caution Do not use excessive force when seating the card, because this may damage the system or the adapter. If the card resists seating, remove it from the syst ...

  • Allied Telesis AT-2716POE - page 25

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 25 7. Depending upon model order connect an appropriate unused power connector from the system power supply harness to the AT - 2716 POE SATA or IDE power connector receptacle as shown in Figure 7. F igure 7. Installing System PS SATA Harness connector to AT - 2 ...

  • Allied Telesis AT-2716POE - page 26

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 26 Connecting the Network Cable s The AT- 2716POE adapter has one fiber optic connector to connect to the data network and one copper PoE port for attaching the adapter to a compatible link partner. The fiber optic connector requires a fiber optic cable. The cop ...

  • Allied Telesis AT-2716POE - page 27

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 27 Figure 8. AT- 2716POE Fiber Port 2. Connect the other end of the cable to the appropriate Ethernet network port or fiber optic port. After the cable is properly connected at both ends, the adapter port LED is functional. See Table 1 on page 15 for a descripti ...

  • Allied Telesis AT-2716POE - page 28

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 28 Checking Warranty Regi st rat i on All Allied Telesis warranties are subject to and provided only on the term s and conditions set out in the Allied Telesis Lim ited Warranties listed on the Allied Telesis website at www.alliedtelesis.com/support/warranty . ...

  • Allied Telesis AT-2716POE - page 29

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 29 Chapter 3 Installing Win dows XP NDIS Driver Software This chapter describes how to install the Windows XP driver software. This chapter contains the following sections:  “Installing the Driver Software” on page 30  “Uninstalling the Driver Softwa ...

  • Allied Telesis AT-2716POE - page 30

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 30 Installing the NDIS Driver Software The system automatically detects new hardware and prompts y ou to install the driver software for that device when a Windows XP sy stem first boots up. The same windows are displayed after an existing device driver is remov ...

  • Allied Telesis AT-2716POE - page 31

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 31 To install the adapter software on a Windows XP system, do the following: 1. Download the software drivers from the Allied Telesis website to a folder on your computer. For specific instructions, see “Where to Find Management Software Updates and Product In ...

  • Allied Telesis AT-2716POE - page 32

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 32 Figure 10. Found New Hardware Wizard Window: Search and Installation Options 4. Click the check box for Include this location in the search . 5. Click Browse and locate the path of the software driver. 6. Click Next . 7. When the software installation is comp ...

  • Allied Telesis AT-2716POE - page 33

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 33 Updating the Adapter Software This section provides a procedure for updating the adapter software for Windows XP Operating Systems. To obtain the latest AT- 2716POE adapter software drivers, you ca n download them from the Allied Telesis website at www.allied ...

  • Allied Telesis AT-2716POE - page 34

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 34 Figure 11. Windows XP Professional Start Window 3. Select Run from the menu and enter the following command: devmgmt. msc See Figure 12 for an example of the Run Window. Figure 12. Run Window ...

  • Allied Telesis AT-2716POE - page 35

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 35 The Device Manager Window is shown in Figure 13. Figure 13. Device Manager Window (Network adapter folder is collapsed) 4. In the Device Manager window, click the + next to the Network adapters folder. The selection expands to show the list of installed netwo ...

  • Allied Telesis AT-2716POE - page 36

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 36 The Welcome to the Hardware Update Wizard window opens, as shown in Figure 14. Figure 14. Welcome to Hardware Update Wizard Window 6. Click No, not this time to copy the driver software from your PC . 7. Click Next . The Second New Found Hardware Wizard Windo ...

  • Allied Telesis AT-2716POE - page 37

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 37 9. Click Next . 10. If you are prompted to specify the location of the software driver, click Browse (do not use the text field) and locate the path. After you install the driver software, you can modify the configuration properties. See Chapter 7, “Setting ...

  • Allied Telesis AT-2716POE - page 38

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 38 Uninstallin g the Driver Software Caution Before uninstalling the Allied Telesis device, be sure to capture all Advanced Property settings because the properties are lost during the uninstall process. To uninstall the adapter software from your system, perfor ...

  • Allied Telesis AT-2716POE - page 39

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 39 Chapter 4 Installing the Windo ws Vista and Windows 7 NDIS Driver Software This chapter describes how to install the Windows Vista and Windows 7 driver software for the AT- 2716POE adapter. The installation procedures are identical for the 32 - bit and 64 - b ...

  • Allied Telesis AT-2716POE - page 40

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 40 Installing the Driver Software After you physically install an AT- 2716POE adapter and turn on t he computer, the system detects the new hardware and asks for a software driver when the Windows operating system first boots up. Shortly after you log in, you ne ...

  • Allied Telesis AT-2716POE - page 41

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 41 3. Enter the following command in the Run window: mmc devmg mt.msc 4. Click OK. The Windows Device Manager window is displayed. For an exam ple of the Device Manager window, see Figure 17. Figure 17. Windows Device Manager Window 5. Open the Network Adapters ...

  • Allied Telesis AT-2716POE - page 42

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 42 Installing the AT - 2716POE Driver The procedure in this section describes how to install the dri ver software for the AT- 2716POE adapter. 1. Open the Device Manger. Refer to “Opening the Device Manager” on page 40 for more information. 2. Open the Netwo ...

  • Allied Telesis AT-2716POE - page 43

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 43 5. Click Browse my computer for driver software . The Update Driver Software - Ethernet Controller: Browse for Driver Software Window is displayed. See Figure 20 on page 43. 6. Click Browse to search your computer for the location of the driver software. Se ...

  • Allied Telesis AT-2716POE - page 44

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 44 Uninstalling t he Driver Sof tware Before physically removing an adapter from your system, you need to uninstall the driver software first. The procedure in this section describes how to uninstall the driver software. Note You must have Administrator privileg ...

  • Allied Telesis AT-2716POE - page 45

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 45 3. To select the Device Manager in the Windows 7 Operating System, select the Start button. See Figure 17 on page 41. Figure 22. Windows 7 Search Box 4. Enter the following command: mmc devmgmt .msc The Device Manager window is displayed. For an example of th ...

  • Allied Telesis AT-2716POE - page 46

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 46 See Figure 19 on page 42 for an example of the Windows Vista Start menu. Figure 23. Windows Vista Start Menu 6. From the Start Menu, select Run . The Windows Vista Run window is displayed. See Figure 16. Figure 24. Windows Vista Run Window 7. Enter the follow ...

  • Allied Telesis AT-2716POE - page 47

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 47 The selection expands to show the list of installed network adapter cards. 9. Right - click on the adapter you want to remove and select Uninstall . A Confirm Device Removal window opens. 10. Click OK to complete the uninstall. Note Not all of the driver file ...

  • Allied Telesis AT-2716POE - page 48

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 48 INTENTIONALLY LEFT BLANK ...

  • Allied Telesis AT-2716POE - page 49

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 49 Chapter 5 Installing the AT - 2716POE AT - Mux CONFIGURATION Application This chapter describes how to install the AT- 2716POE AT- Mux CONFIGUR ATION application on the Windows XP, Windows Vis ta, and Windows 7 driver software on an AT - 2716POE adapter. The ...

  • Allied Telesis AT-2716POE - page 50

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 50 Virtual LANs and the AT - 2716POE AT - Mux Configuration Utility The AT- 2716POE adapter is IEEE 802.1Q - compliant and is designed to support virtual LANs (VLANs) and tagged packets. A VLAN is an independent traffic domain where traffic gener ated by the nod ...

  • Allied Telesis AT-2716POE - page 51

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 51 on that assigned port. The adapter discards all untagged packets on that port as well as any tagged packets with VIDs that do not match the VIDs assigned to the card. Either one or both adapter ports can be tagged with the same or different VIDs. ...

  • Allied Telesis AT-2716POE - page 52

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 52 INTENTIONALLY LEFT BLANK ...

  • Allied Telesis AT-2716POE - page 53

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 53 Installing the AT - 2716POE AT - Mux C onfiguratio n Utility 1. Double click Setup.exe for 32 bit operating system or Setup64.exe for 64 bit operating system to start the AT - 2716POE AT- Mux Setup Wizard. See Figure 28. Figure 28. Welcome to the AT- 2716POE ...

  • Allied Telesis AT-2716POE - page 54

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 54 Figure 29. Confirm Installation Window 3. Click Next . The Installing AT- 2716POE Window is displayed. See Figure 30. Figure 30. Installing AT - 2716FXTP Window 4. Click Next . The Installation Complete window is displayed. See Figure 31 on page 55. ...

  • Allied Telesis AT-2716POE - page 55

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 55 Figure 31. Installation Complete Window 5. Click Close . ...

  • Allied Telesis AT-2716POE - page 56

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 56 Configuring the AT - 2716POE AT - Mux Configuration Utility To launch the AT- 2716POE AT - Mux C onfiguration Utility, perform the following steps: 1. Click on Start. 2. Click on Control Panel 3. Run the ATI AT- Mux Setup program (AT Vlan) from the Control Pa ...

  • Allied Telesis AT-2716POE - page 57

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 57 Chapter 6 VoIP Configur ation Example This chapter describes an example of the AT- 2716POE adapter supporting both data and VoIP Ethernet traffic. VoIP Support The AT - 2716 POE is a two port adapter with a 100FX fiber port and a 100TX copper port capable of ...

  • Allied Telesis AT-2716POE - page 58

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 58 Figure 32. VLAN topology In Figure 32, the VoIP phone is attached to the AT - 2716POE copper port. However, many VoIP devices cannot recognize VLAN tagged packets. The AT - 2716POE Configuration Utility handles this situation by allowin g you to enable the VL ...

  • Allied Telesis AT-2716POE - page 59

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 59 Example 2 shows a scenario where non VLAN aware VoIP phone is present. In this scenario, the copper port of the AT - 2716 PO E is responsible for tagging the VoIP data with VLAN 2. This data is then se nt through the fiber port to the network backbone. Networ ...

  • Allied Telesis AT-2716POE - page 60

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 60 Table 4 shows all of the allowable tagged vs. non - tagged configurations available. Not all possible combinations are supported. Table 4. Allowable tagged/non - tagged combinations When a VLAN capable VoIP phone is present and VLAN tagging is enabled on the ...

  • Allied Telesis AT-2716POE - page 61

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 61 Chapter 7 Setting Advanced Pro perties Although the default values are appropriate in most cases, you ca n change any of the available options to meet t he requirements of your system. The Windows Advanced Properties are accessible from the Advanced Tab. This ...

  • Allied Telesis AT-2716POE - page 62

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 62 Accessing the Advan ced Tab Selecting the Advanced Tab in Windows XP To modify the configuration properties of the Windows Operating Systems, you must access the Advanced Tab. Depending on your operating system, there are several ways to do this. See the foll ...

  • Allied Telesis AT-2716POE - page 63

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 63 Figure 33. System Properties Dialog Box 4. Click on the Advanced Tab. ...

  • Allied Telesis AT-2716POE - page 64

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 64 Selecting the Advanced Tab in Windows 7 To select the Advanced Tab in the Windows 7 Operating System, do the f ollowing: 1. Select the Start button. See Figure 34. Figure 34. Windows 7 Search Box 2. Enter the following command: mmc compmg mt.msc The Device Ma ...

  • Allied Telesis AT-2716POE - page 65

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 65 Figure 35. Device Manager Window 3. Open the Network Adapters folder. The list of installed adapters is dis played. 4. Right click on the Allied Telesis AT - 2716POE adapter. The adapter window is displayed. ...

  • Allied Telesis AT-2716POE - page 66

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 66 The Advanced tab is shown in Figure 36. Figure 36. Advanced Tab 5. Select the Advanced tab. The Advanced tab is shown in Figure 36 on page 66. Selecting the Advanced Tab in Windows Vista In the Windows Vista Operating System, you access the Advanced Tab throu ...

  • Allied Telesis AT-2716POE - page 67

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 67 See Figure 37 for an example of the Windows Vista Start menu. Figure 37. Windows Vista Start Menu 2. From the Start Menu, select Run . The Windows Vista Run window is displayed. See Figure 38. Figure 38. Windows Vista Run Window 3. Enter the following command ...

  • Allied Telesis AT-2716POE - page 68

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 68 5. Open the Network Adapters folder. The list of installed adapters is dis played. 6. Right click on the Allied Telesis AT - 2716POE adapter. The adapter window is displayed. 7. Select the Advanced tab. The Advanced tab is shown in Figure 36 on page 66. ...

  • Allied Telesis AT-2716POE - page 69

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 69 Modifying Advanc ed Propertie s In most cases, the default property values available on the Advanced Tab are appropriate although you can change any of the available options to m eet the requirements of your system. You must have Administrator p rivileges to ...

  • Allied Telesis AT-2716POE - page 70

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 70 Updating the 802.3az EEE property The “802.3az EEE” property property will allow the adapter to enter Low Power Idle mode when network utilization is low. 1. In Microsoft Windows, right - click the Network Adapter in Network Connections and, then click Pr ...

  • Allied Telesis AT-2716POE - page 71

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 71 3. Set the "Flow Control" parameter to Auto, Disable d , Rx Enabled, Rx & Tx Enabled , or Tx Enabled . The default se tting is Auto. Updating the Interrupt Moderation property The “Interrupt Moderation” property will cause the network device ...

  • Allied Telesis AT-2716POE - page 72

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 72 Updating the Large Send Offload v2 (IPv4) The “ Large Send Offload v2 (IPv4) ” property allows for configuring LSO using version 2 of the IPv4 protocol . 1. In Microsoft Windows, right - click the Network Adapter in Network Connections and then click Prop ...

  • Allied Telesis AT-2716POE - page 73

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 73 1. In Microsoft Windows, right - click the Network Adapter in Network Connections and then click Properties. 2. Click the Configure button and then the Advanced tab. 3. Set the Priority & VLAN setting to Priority & VLAN Disabled, Priority & VLAN E ...

  • Allied Telesis AT-2716POE - page 74

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 74 Updating the TCP/UDP Checksum Offload (Ipv6 ) property The “ TCP/UDP Checksum Offload (IPv6) ” property allows configuring c hecksum offload for the IPv6 protocol . 1. In Microsoft Windows, right - click the Network Adapter in Network Connections and then ...

  • Allied Telesis AT-2716POE - page 75

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 75 2. Click the Configure button and then the Advanced tab. 3. Set the " VMQ VLAN Filtering " parameter to Disable or Enable. The default setting is Disable. Updating the Wake Up Capabilities property The "Wake Up Capabilities" parameter allo ...

  • Allied Telesis AT-2716POE - page 76

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 76 Chapter 8 Troubleshooting This chapter describes troubleshooting procedures and discusses the following topics:  “ Hardware Diagnostics” on page 77  “Checking Port LEDs on the Adapter” on page 78  “Troub leshooting Checklist” on page 79 ? ...

  • Allied Telesis AT-2716POE - page 77

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 77 Hardware Diagnostics Loopback diagnostic tests are available for testing the adapter’s hardware under Microsoft DOS operating system and are available for download at the product’s website. These tests provide access to t he adapter's internal or ext ...

  • Allied Telesis AT-2716POE - page 78

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 78 Checking Por t LEDs on the Ada pter The adapter has two LEDs, one LED for each port and indicates network link an d network activity . Before the port LEDs can provide troubleshooting information, the adapter must be connected to the network and the network d ...

  • Allied Telesis AT-2716POE - page 79

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 79 Troubleshooting Checklist The following checklist provides recommended actions to take to resolve problems installing the Allied Telesis AT- 2716POE adapter or running it in your system. Warning Before opening the cabinet of your system for removing or insert ...

  • Allied Telesis AT-2716POE - page 80

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 80 Testing Network Connectivity The following section describes how to test networ k connectivity for Windows XP, Windows Vista, and Windows 7 networks. Use the ping command to determine if network connectivity is working. Note When using forced link speeds, mak ...

  • Allied Telesis AT-2716POE - page 81

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 81 Figure 41. Command Window with ipconfig /a ll displayed 4. Type ping <IP address> from the command line, then press Enter . The network connectivity information is displayed, as shown in Figure 42. Figure 42. Command Window with ping displayed ...

  • Allied Telesis AT-2716POE - page 82

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 82 Software Proble ms and Solutions This section lists problems and solutions for the Microsoft Remote Installation Service (RIS), Windows Operating Systems, and miscellaneous issues. Microsoft Remote Installation Service (RIS) Instructions Problem : Microsoft R ...

  • Allied Telesis AT-2716POE - page 83

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 83 Appendix A Specificat ions Physical Spe cifications This section lists the dimension and weight of AT- 2716POE adapter. Dimensions : 14.09 cm x 5.6 cm ( 5.5 i n x 2.2 in) Weight: 68 g ( 2.4 oz ) Environmenta l Specificat ions The following environmental speci ...

  • Allied Telesis AT-2716POE - page 84

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 84 Storage vibration, peak acceleration: 0.25g (5 to 500 Hz) (Sweep Rate = 1 octave/ min.) Power Specifi cations The operating voltage specification in this section applies to the AT- 2716POE adapter. Power Consumption: 2.5 Watts (without PoE) @ +3.3V Operating ...

  • Allied Telesis AT-2716POE - page 85

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 85 10/100/1000Base - T Twisted - Pair Port Connectors This section lists the pin signals for the 10/100/1000Base - T twisted - pair ports for the AT- 2716POE adapter. Figure 43 illustrates the pin layout to an RJ - 45 connector and port. Figure 43. RJ - 45 Conne ...

  • Allied Telesis AT-2716POE - page 86

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 86 Table 7. RJ - 45 1000Base - T Connector Pinouts (Continued) Pin Pair Signal 4 3 TX and RX+ 5 3 TX and RX - 6 2 TX and RX - 7 4 TX and RX+ 8 4 TX and RX - ...

  • Allied Telesis AT-2716POE - page 87

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 87 Appendix B Cleaning Fibe r Optic Conne ctors The fiber optic connector consists of a fiber optic plug and its adapter. The end of the fiber optic cable is held in the core of the ferrule in the plug. Light signals are transmitted through the core of the fiber ...

  • Allied Telesis AT-2716POE - page 88

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 88 Cleaning Fi ber Optic C onnectors Using a Car tridge - Type Cleaner Fiber optic cartridge cleaners are available from many vendors and are typically called “cartridge cleaners,” as shown in Figure 46. Figure 46. Cartridge Cleaner Note Do not use compresse ...

  • Allied Telesis AT-2716POE - page 89

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 89 Note Rub the ferrule tip on the cleaning surface in one direction only. 3. When you reach the end of the cleaning surface, pick up the ferrule tip, rotate and place it at the top and rub downwards at least 2 times. Caution Failing to pick up the ferrule tip w ...

  • Allied Telesis AT-2716POE - page 90

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 90 Using a Swab Specially treated swabs, known as stick cleaners, are available for cleaning inside connector adapters or hard - to - reach ferrule tips. These swabs, often referred to as “lint free” or “alcoho l free” swabs, are available from many vend ...

  • Allied Telesis AT-2716POE - page 91

    AT- 27 16POE Fas t Ethernet Fiber & P oE Adapter Instal lation and Us er ’s Guide 91 3. If a fiber inspection scope is available, use the scope to inspect the connector to make sure that it is clean and to check for scratches, pits, or other problems that may affect performance. Note Always keep a dust cap on a fiber optic cable when it is no ...

Manufacturer Allied Telesis Category Network Card

Documents that we receive from a manufacturer of a Allied Telesis AT-2716POE can be divided into several groups. They are, among others:
- Allied Telesis technical drawings
- AT-2716POE manuals
- Allied Telesis product data sheets
- information booklets
- or energy labels Allied Telesis AT-2716POE
All of them are important, but the most important information from the point of view of use of the device are in the user manual Allied Telesis AT-2716POE.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Allied Telesis AT-2716POE, service manual, brief instructions and user manuals Allied Telesis AT-2716POE. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Allied Telesis AT-2716POE.

A complete manual for the device Allied Telesis AT-2716POE, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Allied Telesis AT-2716POE by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Allied Telesis AT-2716POE.

A complete Allied Telesis manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Allied Telesis AT-2716POE - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Allied Telesis AT-2716POE, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Allied Telesis AT-2716POE, that we can find in the current document
3. Tips how to use the basic functions of the device Allied Telesis AT-2716POE - which should help us in our first steps of using Allied Telesis AT-2716POE
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Allied Telesis AT-2716POE
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Allied Telesis AT-2716POE in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Allied Telesis AT-2716POE?

Use the form below

If you did not solve your problem by using a manual Allied Telesis AT-2716POE, ask a question using the form below. If a user had a similar problem with Allied Telesis AT-2716POE it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)